[SCSI] lpfc 8.3.34: Correct typecasts for snprintf messages
[deliverable/linux.git] / drivers / scsi / lpfc / lpfc_hbadisc.c
... / ...
CommitLineData
1/*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2004-2012 Emulex. All rights reserved. *
5 * EMULEX and SLI are trademarks of Emulex. *
6 * www.emulex.com *
7 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
8 * *
9 * This program is free software; you can redistribute it and/or *
10 * modify it under the terms of version 2 of the GNU General *
11 * Public License as published by the Free Software Foundation. *
12 * This program is distributed in the hope that it will be useful. *
13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17 * TO BE LEGALLY INVALID. See the GNU General Public License for *
18 * more details, a copy of which can be found in the file COPYING *
19 * included with this package. *
20 *******************************************************************/
21
22#include <linux/blkdev.h>
23#include <linux/delay.h>
24#include <linux/slab.h>
25#include <linux/pci.h>
26#include <linux/kthread.h>
27#include <linux/interrupt.h>
28
29#include <scsi/scsi.h>
30#include <scsi/scsi_device.h>
31#include <scsi/scsi_host.h>
32#include <scsi/scsi_transport_fc.h>
33
34#include "lpfc_hw4.h"
35#include "lpfc_hw.h"
36#include "lpfc_nl.h"
37#include "lpfc_disc.h"
38#include "lpfc_sli.h"
39#include "lpfc_sli4.h"
40#include "lpfc_scsi.h"
41#include "lpfc.h"
42#include "lpfc_logmsg.h"
43#include "lpfc_crtn.h"
44#include "lpfc_vport.h"
45#include "lpfc_debugfs.h"
46
47/* AlpaArray for assignment of scsid for scan-down and bind_method */
48static uint8_t lpfcAlpaArray[] = {
49 0xEF, 0xE8, 0xE4, 0xE2, 0xE1, 0xE0, 0xDC, 0xDA, 0xD9, 0xD6,
50 0xD5, 0xD4, 0xD3, 0xD2, 0xD1, 0xCE, 0xCD, 0xCC, 0xCB, 0xCA,
51 0xC9, 0xC7, 0xC6, 0xC5, 0xC3, 0xBC, 0xBA, 0xB9, 0xB6, 0xB5,
52 0xB4, 0xB3, 0xB2, 0xB1, 0xAE, 0xAD, 0xAC, 0xAB, 0xAA, 0xA9,
53 0xA7, 0xA6, 0xA5, 0xA3, 0x9F, 0x9E, 0x9D, 0x9B, 0x98, 0x97,
54 0x90, 0x8F, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7C, 0x7A, 0x79,
55 0x76, 0x75, 0x74, 0x73, 0x72, 0x71, 0x6E, 0x6D, 0x6C, 0x6B,
56 0x6A, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5C, 0x5A, 0x59, 0x56,
57 0x55, 0x54, 0x53, 0x52, 0x51, 0x4E, 0x4D, 0x4C, 0x4B, 0x4A,
58 0x49, 0x47, 0x46, 0x45, 0x43, 0x3C, 0x3A, 0x39, 0x36, 0x35,
59 0x34, 0x33, 0x32, 0x31, 0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29,
60 0x27, 0x26, 0x25, 0x23, 0x1F, 0x1E, 0x1D, 0x1B, 0x18, 0x17,
61 0x10, 0x0F, 0x08, 0x04, 0x02, 0x01
62};
63
64static void lpfc_disc_timeout_handler(struct lpfc_vport *);
65static void lpfc_disc_flush_list(struct lpfc_vport *vport);
66static void lpfc_unregister_fcfi_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
67static int lpfc_fcf_inuse(struct lpfc_hba *);
68
69void
70lpfc_terminate_rport_io(struct fc_rport *rport)
71{
72 struct lpfc_rport_data *rdata;
73 struct lpfc_nodelist * ndlp;
74 struct lpfc_hba *phba;
75
76 rdata = rport->dd_data;
77 ndlp = rdata->pnode;
78
79 if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
80 if (rport->roles & FC_RPORT_ROLE_FCP_TARGET)
81 printk(KERN_ERR "Cannot find remote node"
82 " to terminate I/O Data x%x\n",
83 rport->port_id);
84 return;
85 }
86
87 phba = ndlp->phba;
88
89 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT,
90 "rport terminate: sid:x%x did:x%x flg:x%x",
91 ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag);
92
93 if (ndlp->nlp_sid != NLP_NO_SID) {
94 lpfc_sli_abort_iocb(ndlp->vport,
95 &phba->sli.ring[phba->sli.fcp_ring],
96 ndlp->nlp_sid, 0, LPFC_CTX_TGT);
97 }
98}
99
100/*
101 * This function will be called when dev_loss_tmo fire.
102 */
103void
104lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
105{
106 struct lpfc_rport_data *rdata;
107 struct lpfc_nodelist * ndlp;
108 struct lpfc_vport *vport;
109 struct lpfc_hba *phba;
110 struct lpfc_work_evt *evtp;
111 int put_node;
112 int put_rport;
113
114 rdata = rport->dd_data;
115 ndlp = rdata->pnode;
116 if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
117 return;
118
119 vport = ndlp->vport;
120 phba = vport->phba;
121
122 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT,
123 "rport devlosscb: sid:x%x did:x%x flg:x%x",
124 ndlp->nlp_sid, ndlp->nlp_DID, ndlp->nlp_flag);
125
126 lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
127 "3181 dev_loss_callbk x%06x, rport %p flg x%x\n",
128 ndlp->nlp_DID, ndlp->rport, ndlp->nlp_flag);
129
130 /* Don't defer this if we are in the process of deleting the vport
131 * or unloading the driver. The unload will cleanup the node
132 * appropriately we just need to cleanup the ndlp rport info here.
133 */
134 if (vport->load_flag & FC_UNLOADING) {
135 put_node = rdata->pnode != NULL;
136 put_rport = ndlp->rport != NULL;
137 rdata->pnode = NULL;
138 ndlp->rport = NULL;
139 if (put_node)
140 lpfc_nlp_put(ndlp);
141 if (put_rport)
142 put_device(&rport->dev);
143 return;
144 }
145
146 if (ndlp->nlp_state == NLP_STE_MAPPED_NODE)
147 return;
148
149 if (ndlp->nlp_type & NLP_FABRIC) {
150
151 /* If the WWPN of the rport and ndlp don't match, ignore it */
152 if (rport->port_name != wwn_to_u64(ndlp->nlp_portname.u.wwn)) {
153 put_device(&rport->dev);
154 return;
155 }
156 }
157
158 evtp = &ndlp->dev_loss_evt;
159
160 if (!list_empty(&evtp->evt_listp))
161 return;
162
163 spin_lock_irq(&phba->hbalock);
164 /* We need to hold the node by incrementing the reference
165 * count until this queued work is done
166 */
167 evtp->evt_arg1 = lpfc_nlp_get(ndlp);
168 if (evtp->evt_arg1) {
169 evtp->evt = LPFC_EVT_DEV_LOSS;
170 list_add_tail(&evtp->evt_listp, &phba->work_list);
171 lpfc_worker_wake_up(phba);
172 }
173 spin_unlock_irq(&phba->hbalock);
174
175 return;
176}
177
178/**
179 * lpfc_dev_loss_tmo_handler - Remote node devloss timeout handler
180 * @ndlp: Pointer to remote node object.
181 *
182 * This function is called from the worker thread when devloss timeout timer
183 * expires. For SLI4 host, this routine shall return 1 when at lease one
184 * remote node, including this @ndlp, is still in use of FCF; otherwise, this
185 * routine shall return 0 when there is no remote node is still in use of FCF
186 * when devloss timeout happened to this @ndlp.
187 **/
188static int
189lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
190{
191 struct lpfc_rport_data *rdata;
192 struct fc_rport *rport;
193 struct lpfc_vport *vport;
194 struct lpfc_hba *phba;
195 uint8_t *name;
196 int put_node;
197 int put_rport;
198 int warn_on = 0;
199 int fcf_inuse = 0;
200
201 rport = ndlp->rport;
202
203 if (!rport)
204 return fcf_inuse;
205
206 rdata = rport->dd_data;
207 name = (uint8_t *) &ndlp->nlp_portname;
208 vport = ndlp->vport;
209 phba = vport->phba;
210
211 if (phba->sli_rev == LPFC_SLI_REV4)
212 fcf_inuse = lpfc_fcf_inuse(phba);
213
214 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT,
215 "rport devlosstmo:did:x%x type:x%x id:x%x",
216 ndlp->nlp_DID, ndlp->nlp_type, rport->scsi_target_id);
217
218 lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
219 "3182 dev_loss_tmo_handler x%06x, rport %p flg x%x\n",
220 ndlp->nlp_DID, ndlp->rport, ndlp->nlp_flag);
221
222 /* Don't defer this if we are in the process of deleting the vport
223 * or unloading the driver. The unload will cleanup the node
224 * appropriately we just need to cleanup the ndlp rport info here.
225 */
226 if (vport->load_flag & FC_UNLOADING) {
227 if (ndlp->nlp_sid != NLP_NO_SID) {
228 /* flush the target */
229 lpfc_sli_abort_iocb(vport,
230 &phba->sli.ring[phba->sli.fcp_ring],
231 ndlp->nlp_sid, 0, LPFC_CTX_TGT);
232 }
233 put_node = rdata->pnode != NULL;
234 put_rport = ndlp->rport != NULL;
235 rdata->pnode = NULL;
236 ndlp->rport = NULL;
237 if (put_node)
238 lpfc_nlp_put(ndlp);
239 if (put_rport)
240 put_device(&rport->dev);
241 return fcf_inuse;
242 }
243
244 if (ndlp->nlp_state == NLP_STE_MAPPED_NODE) {
245 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
246 "0284 Devloss timeout Ignored on "
247 "WWPN %x:%x:%x:%x:%x:%x:%x:%x "
248 "NPort x%x\n",
249 *name, *(name+1), *(name+2), *(name+3),
250 *(name+4), *(name+5), *(name+6), *(name+7),
251 ndlp->nlp_DID);
252 return fcf_inuse;
253 }
254
255 if (ndlp->nlp_type & NLP_FABRIC) {
256 /* We will clean up these Nodes in linkup */
257 put_node = rdata->pnode != NULL;
258 put_rport = ndlp->rport != NULL;
259 rdata->pnode = NULL;
260 ndlp->rport = NULL;
261 if (put_node)
262 lpfc_nlp_put(ndlp);
263 if (put_rport)
264 put_device(&rport->dev);
265 return fcf_inuse;
266 }
267
268 if (ndlp->nlp_sid != NLP_NO_SID) {
269 warn_on = 1;
270 /* flush the target */
271 lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
272 ndlp->nlp_sid, 0, LPFC_CTX_TGT);
273 }
274
275 if (warn_on) {
276 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
277 "0203 Devloss timeout on "
278 "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x "
279 "NPort x%06x Data: x%x x%x x%x\n",
280 *name, *(name+1), *(name+2), *(name+3),
281 *(name+4), *(name+5), *(name+6), *(name+7),
282 ndlp->nlp_DID, ndlp->nlp_flag,
283 ndlp->nlp_state, ndlp->nlp_rpi);
284 } else {
285 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
286 "0204 Devloss timeout on "
287 "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x "
288 "NPort x%06x Data: x%x x%x x%x\n",
289 *name, *(name+1), *(name+2), *(name+3),
290 *(name+4), *(name+5), *(name+6), *(name+7),
291 ndlp->nlp_DID, ndlp->nlp_flag,
292 ndlp->nlp_state, ndlp->nlp_rpi);
293 }
294
295 put_node = rdata->pnode != NULL;
296 put_rport = ndlp->rport != NULL;
297 rdata->pnode = NULL;
298 ndlp->rport = NULL;
299 if (put_node)
300 lpfc_nlp_put(ndlp);
301 if (put_rport)
302 put_device(&rport->dev);
303
304 if (!(vport->load_flag & FC_UNLOADING) &&
305 !(ndlp->nlp_flag & NLP_DELAY_TMO) &&
306 !(ndlp->nlp_flag & NLP_NPR_2B_DISC) &&
307 (ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) &&
308 (ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) &&
309 (ndlp->nlp_state != NLP_STE_PRLI_ISSUE))
310 lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM);
311
312 return fcf_inuse;
313}
314
315/**
316 * lpfc_sli4_post_dev_loss_tmo_handler - SLI4 post devloss timeout handler
317 * @phba: Pointer to hba context object.
318 * @fcf_inuse: SLI4 FCF in-use state reported from devloss timeout handler.
319 * @nlp_did: remote node identifer with devloss timeout.
320 *
321 * This function is called from the worker thread after invoking devloss
322 * timeout handler and releasing the reference count for the ndlp with
323 * which the devloss timeout was handled for SLI4 host. For the devloss
324 * timeout of the last remote node which had been in use of FCF, when this
325 * routine is invoked, it shall be guaranteed that none of the remote are
326 * in-use of FCF. When devloss timeout to the last remote using the FCF,
327 * if the FIP engine is neither in FCF table scan process nor roundrobin
328 * failover process, the in-use FCF shall be unregistered. If the FIP
329 * engine is in FCF discovery process, the devloss timeout state shall
330 * be set for either the FCF table scan process or roundrobin failover
331 * process to unregister the in-use FCF.
332 **/
333static void
334lpfc_sli4_post_dev_loss_tmo_handler(struct lpfc_hba *phba, int fcf_inuse,
335 uint32_t nlp_did)
336{
337 /* If devloss timeout happened to a remote node when FCF had no
338 * longer been in-use, do nothing.
339 */
340 if (!fcf_inuse)
341 return;
342
343 if ((phba->hba_flag & HBA_FIP_SUPPORT) && !lpfc_fcf_inuse(phba)) {
344 spin_lock_irq(&phba->hbalock);
345 if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
346 if (phba->hba_flag & HBA_DEVLOSS_TMO) {
347 spin_unlock_irq(&phba->hbalock);
348 return;
349 }
350 phba->hba_flag |= HBA_DEVLOSS_TMO;
351 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
352 "2847 Last remote node (x%x) using "
353 "FCF devloss tmo\n", nlp_did);
354 }
355 if (phba->fcf.fcf_flag & FCF_REDISC_PROG) {
356 spin_unlock_irq(&phba->hbalock);
357 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
358 "2868 Devloss tmo to FCF rediscovery "
359 "in progress\n");
360 return;
361 }
362 if (!(phba->hba_flag & (FCF_TS_INPROG | FCF_RR_INPROG))) {
363 spin_unlock_irq(&phba->hbalock);
364 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
365 "2869 Devloss tmo to idle FIP engine, "
366 "unreg in-use FCF and rescan.\n");
367 /* Unregister in-use FCF and rescan */
368 lpfc_unregister_fcf_rescan(phba);
369 return;
370 }
371 spin_unlock_irq(&phba->hbalock);
372 if (phba->hba_flag & FCF_TS_INPROG)
373 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
374 "2870 FCF table scan in progress\n");
375 if (phba->hba_flag & FCF_RR_INPROG)
376 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
377 "2871 FLOGI roundrobin FCF failover "
378 "in progress\n");
379 }
380 lpfc_unregister_unused_fcf(phba);
381}
382
383/**
384 * lpfc_alloc_fast_evt - Allocates data structure for posting event
385 * @phba: Pointer to hba context object.
386 *
387 * This function is called from the functions which need to post
388 * events from interrupt context. This function allocates data
389 * structure required for posting event. It also keeps track of
390 * number of events pending and prevent event storm when there are
391 * too many events.
392 **/
393struct lpfc_fast_path_event *
394lpfc_alloc_fast_evt(struct lpfc_hba *phba) {
395 struct lpfc_fast_path_event *ret;
396
397 /* If there are lot of fast event do not exhaust memory due to this */
398 if (atomic_read(&phba->fast_event_count) > LPFC_MAX_EVT_COUNT)
399 return NULL;
400
401 ret = kzalloc(sizeof(struct lpfc_fast_path_event),
402 GFP_ATOMIC);
403 if (ret) {
404 atomic_inc(&phba->fast_event_count);
405 INIT_LIST_HEAD(&ret->work_evt.evt_listp);
406 ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
407 }
408 return ret;
409}
410
411/**
412 * lpfc_free_fast_evt - Frees event data structure
413 * @phba: Pointer to hba context object.
414 * @evt: Event object which need to be freed.
415 *
416 * This function frees the data structure required for posting
417 * events.
418 **/
419void
420lpfc_free_fast_evt(struct lpfc_hba *phba,
421 struct lpfc_fast_path_event *evt) {
422
423 atomic_dec(&phba->fast_event_count);
424 kfree(evt);
425}
426
427/**
428 * lpfc_send_fastpath_evt - Posts events generated from fast path
429 * @phba: Pointer to hba context object.
430 * @evtp: Event data structure.
431 *
432 * This function is called from worker thread, when the interrupt
433 * context need to post an event. This function posts the event
434 * to fc transport netlink interface.
435 **/
436static void
437lpfc_send_fastpath_evt(struct lpfc_hba *phba,
438 struct lpfc_work_evt *evtp)
439{
440 unsigned long evt_category, evt_sub_category;
441 struct lpfc_fast_path_event *fast_evt_data;
442 char *evt_data;
443 uint32_t evt_data_size;
444 struct Scsi_Host *shost;
445
446 fast_evt_data = container_of(evtp, struct lpfc_fast_path_event,
447 work_evt);
448
449 evt_category = (unsigned long) fast_evt_data->un.fabric_evt.event_type;
450 evt_sub_category = (unsigned long) fast_evt_data->un.
451 fabric_evt.subcategory;
452 shost = lpfc_shost_from_vport(fast_evt_data->vport);
453 if (evt_category == FC_REG_FABRIC_EVENT) {
454 if (evt_sub_category == LPFC_EVENT_FCPRDCHKERR) {
455 evt_data = (char *) &fast_evt_data->un.read_check_error;
456 evt_data_size = sizeof(fast_evt_data->un.
457 read_check_error);
458 } else if ((evt_sub_category == LPFC_EVENT_FABRIC_BUSY) ||
459 (evt_sub_category == LPFC_EVENT_PORT_BUSY)) {
460 evt_data = (char *) &fast_evt_data->un.fabric_evt;
461 evt_data_size = sizeof(fast_evt_data->un.fabric_evt);
462 } else {
463 lpfc_free_fast_evt(phba, fast_evt_data);
464 return;
465 }
466 } else if (evt_category == FC_REG_SCSI_EVENT) {
467 switch (evt_sub_category) {
468 case LPFC_EVENT_QFULL:
469 case LPFC_EVENT_DEVBSY:
470 evt_data = (char *) &fast_evt_data->un.scsi_evt;
471 evt_data_size = sizeof(fast_evt_data->un.scsi_evt);
472 break;
473 case LPFC_EVENT_CHECK_COND:
474 evt_data = (char *) &fast_evt_data->un.check_cond_evt;
475 evt_data_size = sizeof(fast_evt_data->un.
476 check_cond_evt);
477 break;
478 case LPFC_EVENT_VARQUEDEPTH:
479 evt_data = (char *) &fast_evt_data->un.queue_depth_evt;
480 evt_data_size = sizeof(fast_evt_data->un.
481 queue_depth_evt);
482 break;
483 default:
484 lpfc_free_fast_evt(phba, fast_evt_data);
485 return;
486 }
487 } else {
488 lpfc_free_fast_evt(phba, fast_evt_data);
489 return;
490 }
491
492 fc_host_post_vendor_event(shost,
493 fc_get_event_number(),
494 evt_data_size,
495 evt_data,
496 LPFC_NL_VENDOR_ID);
497
498 lpfc_free_fast_evt(phba, fast_evt_data);
499 return;
500}
501
502static void
503lpfc_work_list_done(struct lpfc_hba *phba)
504{
505 struct lpfc_work_evt *evtp = NULL;
506 struct lpfc_nodelist *ndlp;
507 int free_evt;
508 int fcf_inuse;
509 uint32_t nlp_did;
510
511 spin_lock_irq(&phba->hbalock);
512 while (!list_empty(&phba->work_list)) {
513 list_remove_head((&phba->work_list), evtp, typeof(*evtp),
514 evt_listp);
515 spin_unlock_irq(&phba->hbalock);
516 free_evt = 1;
517 switch (evtp->evt) {
518 case LPFC_EVT_ELS_RETRY:
519 ndlp = (struct lpfc_nodelist *) (evtp->evt_arg1);
520 lpfc_els_retry_delay_handler(ndlp);
521 free_evt = 0; /* evt is part of ndlp */
522 /* decrement the node reference count held
523 * for this queued work
524 */
525 lpfc_nlp_put(ndlp);
526 break;
527 case LPFC_EVT_DEV_LOSS:
528 ndlp = (struct lpfc_nodelist *)(evtp->evt_arg1);
529 fcf_inuse = lpfc_dev_loss_tmo_handler(ndlp);
530 free_evt = 0;
531 /* decrement the node reference count held for
532 * this queued work
533 */
534 nlp_did = ndlp->nlp_DID;
535 lpfc_nlp_put(ndlp);
536 if (phba->sli_rev == LPFC_SLI_REV4)
537 lpfc_sli4_post_dev_loss_tmo_handler(phba,
538 fcf_inuse,
539 nlp_did);
540 break;
541 case LPFC_EVT_ONLINE:
542 if (phba->link_state < LPFC_LINK_DOWN)
543 *(int *) (evtp->evt_arg1) = lpfc_online(phba);
544 else
545 *(int *) (evtp->evt_arg1) = 0;
546 complete((struct completion *)(evtp->evt_arg2));
547 break;
548 case LPFC_EVT_OFFLINE_PREP:
549 if (phba->link_state >= LPFC_LINK_DOWN)
550 lpfc_offline_prep(phba, LPFC_MBX_WAIT);
551 *(int *)(evtp->evt_arg1) = 0;
552 complete((struct completion *)(evtp->evt_arg2));
553 break;
554 case LPFC_EVT_OFFLINE:
555 lpfc_offline(phba);
556 lpfc_sli_brdrestart(phba);
557 *(int *)(evtp->evt_arg1) =
558 lpfc_sli_brdready(phba, HS_FFRDY | HS_MBRDY);
559 lpfc_unblock_mgmt_io(phba);
560 complete((struct completion *)(evtp->evt_arg2));
561 break;
562 case LPFC_EVT_WARM_START:
563 lpfc_offline(phba);
564 lpfc_reset_barrier(phba);
565 lpfc_sli_brdreset(phba);
566 lpfc_hba_down_post(phba);
567 *(int *)(evtp->evt_arg1) =
568 lpfc_sli_brdready(phba, HS_MBRDY);
569 lpfc_unblock_mgmt_io(phba);
570 complete((struct completion *)(evtp->evt_arg2));
571 break;
572 case LPFC_EVT_KILL:
573 lpfc_offline(phba);
574 *(int *)(evtp->evt_arg1)
575 = (phba->pport->stopped)
576 ? 0 : lpfc_sli_brdkill(phba);
577 lpfc_unblock_mgmt_io(phba);
578 complete((struct completion *)(evtp->evt_arg2));
579 break;
580 case LPFC_EVT_FASTPATH_MGMT_EVT:
581 lpfc_send_fastpath_evt(phba, evtp);
582 free_evt = 0;
583 break;
584 case LPFC_EVT_RESET_HBA:
585 if (!(phba->pport->load_flag & FC_UNLOADING))
586 lpfc_reset_hba(phba);
587 break;
588 }
589 if (free_evt)
590 kfree(evtp);
591 spin_lock_irq(&phba->hbalock);
592 }
593 spin_unlock_irq(&phba->hbalock);
594
595}
596
597static void
598lpfc_work_done(struct lpfc_hba *phba)
599{
600 struct lpfc_sli_ring *pring;
601 uint32_t ha_copy, status, control, work_port_events;
602 struct lpfc_vport **vports;
603 struct lpfc_vport *vport;
604 int i;
605
606 spin_lock_irq(&phba->hbalock);
607 ha_copy = phba->work_ha;
608 phba->work_ha = 0;
609 spin_unlock_irq(&phba->hbalock);
610
611 /* First, try to post the next mailbox command to SLI4 device */
612 if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
613 lpfc_sli4_post_async_mbox(phba);
614
615 if (ha_copy & HA_ERATT)
616 /* Handle the error attention event */
617 lpfc_handle_eratt(phba);
618
619 if (ha_copy & HA_MBATT)
620 lpfc_sli_handle_mb_event(phba);
621
622 if (ha_copy & HA_LATT)
623 lpfc_handle_latt(phba);
624
625 /* Process SLI4 events */
626 if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
627 if (phba->hba_flag & HBA_RRQ_ACTIVE)
628 lpfc_handle_rrq_active(phba);
629 if (phba->hba_flag & FCP_XRI_ABORT_EVENT)
630 lpfc_sli4_fcp_xri_abort_event_proc(phba);
631 if (phba->hba_flag & ELS_XRI_ABORT_EVENT)
632 lpfc_sli4_els_xri_abort_event_proc(phba);
633 if (phba->hba_flag & ASYNC_EVENT)
634 lpfc_sli4_async_event_proc(phba);
635 if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) {
636 spin_lock_irq(&phba->hbalock);
637 phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER;
638 spin_unlock_irq(&phba->hbalock);
639 lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
640 }
641 if (phba->fcf.fcf_flag & FCF_REDISC_EVT)
642 lpfc_sli4_fcf_redisc_event_proc(phba);
643 }
644
645 vports = lpfc_create_vport_work_array(phba);
646 if (vports != NULL)
647 for (i = 0; i <= phba->max_vports; i++) {
648 /*
649 * We could have no vports in array if unloading, so if
650 * this happens then just use the pport
651 */
652 if (vports[i] == NULL && i == 0)
653 vport = phba->pport;
654 else
655 vport = vports[i];
656 if (vport == NULL)
657 break;
658 spin_lock_irq(&vport->work_port_lock);
659 work_port_events = vport->work_port_events;
660 vport->work_port_events &= ~work_port_events;
661 spin_unlock_irq(&vport->work_port_lock);
662 if (work_port_events & WORKER_DISC_TMO)
663 lpfc_disc_timeout_handler(vport);
664 if (work_port_events & WORKER_ELS_TMO)
665 lpfc_els_timeout_handler(vport);
666 if (work_port_events & WORKER_HB_TMO)
667 lpfc_hb_timeout_handler(phba);
668 if (work_port_events & WORKER_MBOX_TMO)
669 lpfc_mbox_timeout_handler(phba);
670 if (work_port_events & WORKER_FABRIC_BLOCK_TMO)
671 lpfc_unblock_fabric_iocbs(phba);
672 if (work_port_events & WORKER_FDMI_TMO)
673 lpfc_fdmi_timeout_handler(vport);
674 if (work_port_events & WORKER_RAMP_DOWN_QUEUE)
675 lpfc_ramp_down_queue_handler(phba);
676 if (work_port_events & WORKER_RAMP_UP_QUEUE)
677 lpfc_ramp_up_queue_handler(phba);
678 if (work_port_events & WORKER_DELAYED_DISC_TMO)
679 lpfc_delayed_disc_timeout_handler(vport);
680 }
681 lpfc_destroy_vport_work_array(phba, vports);
682
683 pring = &phba->sli.ring[LPFC_ELS_RING];
684 status = (ha_copy & (HA_RXMASK << (4*LPFC_ELS_RING)));
685 status >>= (4*LPFC_ELS_RING);
686 if ((status & HA_RXMASK) ||
687 (pring->flag & LPFC_DEFERRED_RING_EVENT) ||
688 (phba->hba_flag & HBA_SP_QUEUE_EVT)) {
689 if (pring->flag & LPFC_STOP_IOCB_EVENT) {
690 pring->flag |= LPFC_DEFERRED_RING_EVENT;
691 /* Set the lpfc data pending flag */
692 set_bit(LPFC_DATA_READY, &phba->data_flags);
693 } else {
694 pring->flag &= ~LPFC_DEFERRED_RING_EVENT;
695 lpfc_sli_handle_slow_ring_event(phba, pring,
696 (status &
697 HA_RXMASK));
698 }
699 if ((phba->sli_rev == LPFC_SLI_REV4) && pring->txq_cnt)
700 lpfc_drain_txq(phba);
701 /*
702 * Turn on Ring interrupts
703 */
704 if (phba->sli_rev <= LPFC_SLI_REV3) {
705 spin_lock_irq(&phba->hbalock);
706 control = readl(phba->HCregaddr);
707 if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
708 lpfc_debugfs_slow_ring_trc(phba,
709 "WRK Enable ring: cntl:x%x hacopy:x%x",
710 control, ha_copy, 0);
711
712 control |= (HC_R0INT_ENA << LPFC_ELS_RING);
713 writel(control, phba->HCregaddr);
714 readl(phba->HCregaddr); /* flush */
715 } else {
716 lpfc_debugfs_slow_ring_trc(phba,
717 "WRK Ring ok: cntl:x%x hacopy:x%x",
718 control, ha_copy, 0);
719 }
720 spin_unlock_irq(&phba->hbalock);
721 }
722 }
723 lpfc_work_list_done(phba);
724}
725
726int
727lpfc_do_work(void *p)
728{
729 struct lpfc_hba *phba = p;
730 int rc;
731
732 set_user_nice(current, -20);
733 current->flags |= PF_NOFREEZE;
734 phba->data_flags = 0;
735
736 while (!kthread_should_stop()) {
737 /* wait and check worker queue activities */
738 rc = wait_event_interruptible(phba->work_waitq,
739 (test_and_clear_bit(LPFC_DATA_READY,
740 &phba->data_flags)
741 || kthread_should_stop()));
742 /* Signal wakeup shall terminate the worker thread */
743 if (rc) {
744 lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
745 "0433 Wakeup on signal: rc=x%x\n", rc);
746 break;
747 }
748
749 /* Attend pending lpfc data processing */
750 lpfc_work_done(phba);
751 }
752 phba->worker_thread = NULL;
753 lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
754 "0432 Worker thread stopped.\n");
755 return 0;
756}
757
758/*
759 * This is only called to handle FC worker events. Since this a rare
760 * occurrence, we allocate a struct lpfc_work_evt structure here instead of
761 * embedding it in the IOCB.
762 */
763int
764lpfc_workq_post_event(struct lpfc_hba *phba, void *arg1, void *arg2,
765 uint32_t evt)
766{
767 struct lpfc_work_evt *evtp;
768 unsigned long flags;
769
770 /*
771 * All Mailbox completions and LPFC_ELS_RING rcv ring IOCB events will
772 * be queued to worker thread for processing
773 */
774 evtp = kmalloc(sizeof(struct lpfc_work_evt), GFP_ATOMIC);
775 if (!evtp)
776 return 0;
777
778 evtp->evt_arg1 = arg1;
779 evtp->evt_arg2 = arg2;
780 evtp->evt = evt;
781
782 spin_lock_irqsave(&phba->hbalock, flags);
783 list_add_tail(&evtp->evt_listp, &phba->work_list);
784 spin_unlock_irqrestore(&phba->hbalock, flags);
785
786 lpfc_worker_wake_up(phba);
787
788 return 1;
789}
790
791void
792lpfc_cleanup_rpis(struct lpfc_vport *vport, int remove)
793{
794 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
795 struct lpfc_hba *phba = vport->phba;
796 struct lpfc_nodelist *ndlp, *next_ndlp;
797 int rc;
798
799 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
800 if (!NLP_CHK_NODE_ACT(ndlp))
801 continue;
802 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
803 continue;
804 if ((phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) ||
805 ((vport->port_type == LPFC_NPIV_PORT) &&
806 (ndlp->nlp_DID == NameServer_DID)))
807 lpfc_unreg_rpi(vport, ndlp);
808
809 /* Leave Fabric nodes alone on link down */
810 if ((phba->sli_rev < LPFC_SLI_REV4) &&
811 (!remove && ndlp->nlp_type & NLP_FABRIC))
812 continue;
813 rc = lpfc_disc_state_machine(vport, ndlp, NULL,
814 remove
815 ? NLP_EVT_DEVICE_RM
816 : NLP_EVT_DEVICE_RECOVERY);
817 }
818 if (phba->sli3_options & LPFC_SLI3_VPORT_TEARDOWN) {
819 if (phba->sli_rev == LPFC_SLI_REV4)
820 lpfc_sli4_unreg_all_rpis(vport);
821 lpfc_mbx_unreg_vpi(vport);
822 spin_lock_irq(shost->host_lock);
823 vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
824 spin_unlock_irq(shost->host_lock);
825 }
826}
827
828void
829lpfc_port_link_failure(struct lpfc_vport *vport)
830{
831 lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
832
833 /* Cleanup any outstanding received buffers */
834 lpfc_cleanup_rcv_buffers(vport);
835
836 /* Cleanup any outstanding RSCN activity */
837 lpfc_els_flush_rscn(vport);
838
839 /* Cleanup any outstanding ELS commands */
840 lpfc_els_flush_cmd(vport);
841
842 lpfc_cleanup_rpis(vport, 0);
843
844 /* Turn off discovery timer if its running */
845 lpfc_can_disctmo(vport);
846}
847
848void
849lpfc_linkdown_port(struct lpfc_vport *vport)
850{
851 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
852
853 fc_host_post_event(shost, fc_get_event_number(), FCH_EVT_LINKDOWN, 0);
854
855 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
856 "Link Down: state:x%x rtry:x%x flg:x%x",
857 vport->port_state, vport->fc_ns_retry, vport->fc_flag);
858
859 lpfc_port_link_failure(vport);
860
861 /* Stop delayed Nport discovery */
862 spin_lock_irq(shost->host_lock);
863 vport->fc_flag &= ~FC_DISC_DELAYED;
864 spin_unlock_irq(shost->host_lock);
865 del_timer_sync(&vport->delayed_disc_tmo);
866}
867
868int
869lpfc_linkdown(struct lpfc_hba *phba)
870{
871 struct lpfc_vport *vport = phba->pport;
872 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
873 struct lpfc_vport **vports;
874 LPFC_MBOXQ_t *mb;
875 int i;
876
877 if (phba->link_state == LPFC_LINK_DOWN)
878 return 0;
879
880 /* Block all SCSI stack I/Os */
881 lpfc_scsi_dev_block(phba);
882
883 spin_lock_irq(&phba->hbalock);
884 phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE);
885 spin_unlock_irq(&phba->hbalock);
886 if (phba->link_state > LPFC_LINK_DOWN) {
887 phba->link_state = LPFC_LINK_DOWN;
888 spin_lock_irq(shost->host_lock);
889 phba->pport->fc_flag &= ~FC_LBIT;
890 spin_unlock_irq(shost->host_lock);
891 }
892 vports = lpfc_create_vport_work_array(phba);
893 if (vports != NULL)
894 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
895 /* Issue a LINK DOWN event to all nodes */
896 lpfc_linkdown_port(vports[i]);
897 }
898 lpfc_destroy_vport_work_array(phba, vports);
899 /* Clean up any firmware default rpi's */
900 mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
901 if (mb) {
902 lpfc_unreg_did(phba, 0xffff, LPFC_UNREG_ALL_DFLT_RPIS, mb);
903 mb->vport = vport;
904 mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
905 if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT)
906 == MBX_NOT_FINISHED) {
907 mempool_free(mb, phba->mbox_mem_pool);
908 }
909 }
910
911 /* Setup myDID for link up if we are in pt2pt mode */
912 if (phba->pport->fc_flag & FC_PT2PT) {
913 phba->pport->fc_myDID = 0;
914 mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
915 if (mb) {
916 lpfc_config_link(phba, mb);
917 mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
918 mb->vport = vport;
919 if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT)
920 == MBX_NOT_FINISHED) {
921 mempool_free(mb, phba->mbox_mem_pool);
922 }
923 }
924 spin_lock_irq(shost->host_lock);
925 phba->pport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI);
926 spin_unlock_irq(shost->host_lock);
927 }
928
929 return 0;
930}
931
932static void
933lpfc_linkup_cleanup_nodes(struct lpfc_vport *vport)
934{
935 struct lpfc_nodelist *ndlp;
936
937 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
938 if (!NLP_CHK_NODE_ACT(ndlp))
939 continue;
940 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
941 continue;
942 if (ndlp->nlp_type & NLP_FABRIC) {
943 /* On Linkup its safe to clean up the ndlp
944 * from Fabric connections.
945 */
946 if (ndlp->nlp_DID != Fabric_DID)
947 lpfc_unreg_rpi(vport, ndlp);
948 lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
949 } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) {
950 /* Fail outstanding IO now since device is
951 * marked for PLOGI.
952 */
953 lpfc_unreg_rpi(vport, ndlp);
954 }
955 }
956}
957
958static void
959lpfc_linkup_port(struct lpfc_vport *vport)
960{
961 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
962 struct lpfc_hba *phba = vport->phba;
963
964 if ((vport->load_flag & FC_UNLOADING) != 0)
965 return;
966
967 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
968 "Link Up: top:x%x speed:x%x flg:x%x",
969 phba->fc_topology, phba->fc_linkspeed, phba->link_flag);
970
971 /* If NPIV is not enabled, only bring the physical port up */
972 if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
973 (vport != phba->pport))
974 return;
975
976 fc_host_post_event(shost, fc_get_event_number(), FCH_EVT_LINKUP, 0);
977
978 spin_lock_irq(shost->host_lock);
979 vport->fc_flag &= ~(FC_PT2PT | FC_PT2PT_PLOGI | FC_ABORT_DISCOVERY |
980 FC_RSCN_MODE | FC_NLP_MORE | FC_RSCN_DISCOVERY);
981 vport->fc_flag |= FC_NDISC_ACTIVE;
982 vport->fc_ns_retry = 0;
983 spin_unlock_irq(shost->host_lock);
984
985 if (vport->fc_flag & FC_LBIT)
986 lpfc_linkup_cleanup_nodes(vport);
987
988}
989
990static int
991lpfc_linkup(struct lpfc_hba *phba)
992{
993 struct lpfc_vport **vports;
994 int i;
995
996 lpfc_cleanup_wt_rrqs(phba);
997 phba->link_state = LPFC_LINK_UP;
998
999 /* Unblock fabric iocbs if they are blocked */
1000 clear_bit(FABRIC_COMANDS_BLOCKED, &phba->bit_flags);
1001 del_timer_sync(&phba->fabric_block_timer);
1002
1003 vports = lpfc_create_vport_work_array(phba);
1004 if (vports != NULL)
1005 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
1006 lpfc_linkup_port(vports[i]);
1007 lpfc_destroy_vport_work_array(phba, vports);
1008 if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
1009 (phba->sli_rev < LPFC_SLI_REV4))
1010 lpfc_issue_clear_la(phba, phba->pport);
1011
1012 return 0;
1013}
1014
1015/*
1016 * This routine handles processing a CLEAR_LA mailbox
1017 * command upon completion. It is setup in the LPFC_MBOXQ
1018 * as the completion routine when the command is
1019 * handed off to the SLI layer.
1020 */
1021static void
1022lpfc_mbx_cmpl_clear_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
1023{
1024 struct lpfc_vport *vport = pmb->vport;
1025 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
1026 struct lpfc_sli *psli = &phba->sli;
1027 MAILBOX_t *mb = &pmb->u.mb;
1028 uint32_t control;
1029
1030 /* Since we don't do discovery right now, turn these off here */
1031 psli->ring[psli->extra_ring].flag &= ~LPFC_STOP_IOCB_EVENT;
1032 psli->ring[psli->fcp_ring].flag &= ~LPFC_STOP_IOCB_EVENT;
1033 psli->ring[psli->next_ring].flag &= ~LPFC_STOP_IOCB_EVENT;
1034
1035 /* Check for error */
1036 if ((mb->mbxStatus) && (mb->mbxStatus != 0x1601)) {
1037 /* CLEAR_LA mbox error <mbxStatus> state <hba_state> */
1038 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
1039 "0320 CLEAR_LA mbxStatus error x%x hba "
1040 "state x%x\n",
1041 mb->mbxStatus, vport->port_state);
1042 phba->link_state = LPFC_HBA_ERROR;
1043 goto out;
1044 }
1045
1046 if (vport->port_type == LPFC_PHYSICAL_PORT)
1047 phba->link_state = LPFC_HBA_READY;
1048
1049 spin_lock_irq(&phba->hbalock);
1050 psli->sli_flag |= LPFC_PROCESS_LA;
1051 control = readl(phba->HCregaddr);
1052 control |= HC_LAINT_ENA;
1053 writel(control, phba->HCregaddr);
1054 readl(phba->HCregaddr); /* flush */
1055 spin_unlock_irq(&phba->hbalock);
1056 mempool_free(pmb, phba->mbox_mem_pool);
1057 return;
1058
1059out:
1060 /* Device Discovery completes */
1061 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
1062 "0225 Device Discovery completes\n");
1063 mempool_free(pmb, phba->mbox_mem_pool);
1064
1065 spin_lock_irq(shost->host_lock);
1066 vport->fc_flag &= ~FC_ABORT_DISCOVERY;
1067 spin_unlock_irq(shost->host_lock);
1068
1069 lpfc_can_disctmo(vport);
1070
1071 /* turn on Link Attention interrupts */
1072
1073 spin_lock_irq(&phba->hbalock);
1074 psli->sli_flag |= LPFC_PROCESS_LA;
1075 control = readl(phba->HCregaddr);
1076 control |= HC_LAINT_ENA;
1077 writel(control, phba->HCregaddr);
1078 readl(phba->HCregaddr); /* flush */
1079 spin_unlock_irq(&phba->hbalock);
1080
1081 return;
1082}
1083
1084
1085static void
1086lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
1087{
1088 struct lpfc_vport *vport = pmb->vport;
1089
1090 if (pmb->u.mb.mbxStatus)
1091 goto out;
1092
1093 mempool_free(pmb, phba->mbox_mem_pool);
1094
1095 /* don't perform discovery for SLI4 loopback diagnostic test */
1096 if ((phba->sli_rev == LPFC_SLI_REV4) &&
1097 !(phba->hba_flag & HBA_FCOE_MODE) &&
1098 (phba->link_flag & LS_LOOPBACK_MODE))
1099 return;
1100
1101 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP &&
1102 vport->fc_flag & FC_PUBLIC_LOOP &&
1103 !(vport->fc_flag & FC_LBIT)) {
1104 /* Need to wait for FAN - use discovery timer
1105 * for timeout. port_state is identically
1106 * LPFC_LOCAL_CFG_LINK while waiting for FAN
1107 */
1108 lpfc_set_disctmo(vport);
1109 return;
1110 }
1111
1112 /* Start discovery by sending a FLOGI. port_state is identically
1113 * LPFC_FLOGI while waiting for FLOGI cmpl
1114 */
1115 if (vport->port_state != LPFC_FLOGI || vport->fc_flag & FC_PT2PT_PLOGI)
1116 lpfc_initial_flogi(vport);
1117 return;
1118
1119out:
1120 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
1121 "0306 CONFIG_LINK mbxStatus error x%x "
1122 "HBA state x%x\n",
1123 pmb->u.mb.mbxStatus, vport->port_state);
1124 mempool_free(pmb, phba->mbox_mem_pool);
1125
1126 lpfc_linkdown(phba);
1127
1128 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
1129 "0200 CONFIG_LINK bad hba state x%x\n",
1130 vport->port_state);
1131
1132 lpfc_issue_clear_la(phba, vport);
1133 return;
1134}
1135
1136/**
1137 * lpfc_sli4_clear_fcf_rr_bmask
1138 * @phba pointer to the struct lpfc_hba for this port.
1139 * This fucnction resets the round robin bit mask and clears the
1140 * fcf priority list. The list deletions are done while holding the
1141 * hbalock. The ON_LIST flag and the FLOGI_FAILED flags are cleared
1142 * from the lpfc_fcf_pri record.
1143 **/
1144void
1145lpfc_sli4_clear_fcf_rr_bmask(struct lpfc_hba *phba)
1146{
1147 struct lpfc_fcf_pri *fcf_pri;
1148 struct lpfc_fcf_pri *next_fcf_pri;
1149 memset(phba->fcf.fcf_rr_bmask, 0, sizeof(*phba->fcf.fcf_rr_bmask));
1150 spin_lock_irq(&phba->hbalock);
1151 list_for_each_entry_safe(fcf_pri, next_fcf_pri,
1152 &phba->fcf.fcf_pri_list, list) {
1153 list_del_init(&fcf_pri->list);
1154 fcf_pri->fcf_rec.flag = 0;
1155 }
1156 spin_unlock_irq(&phba->hbalock);
1157}
1158static void
1159lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
1160{
1161 struct lpfc_vport *vport = mboxq->vport;
1162
1163 if (mboxq->u.mb.mbxStatus) {
1164 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
1165 "2017 REG_FCFI mbxStatus error x%x "
1166 "HBA state x%x\n",
1167 mboxq->u.mb.mbxStatus, vport->port_state);
1168 goto fail_out;
1169 }
1170
1171 /* Start FCoE discovery by sending a FLOGI. */
1172 phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi, &mboxq->u.mqe.un.reg_fcfi);
1173 /* Set the FCFI registered flag */
1174 spin_lock_irq(&phba->hbalock);
1175 phba->fcf.fcf_flag |= FCF_REGISTERED;
1176 spin_unlock_irq(&phba->hbalock);
1177
1178 /* If there is a pending FCoE event, restart FCF table scan. */
1179 if ((!(phba->hba_flag & FCF_RR_INPROG)) &&
1180 lpfc_check_pending_fcoe_event(phba, LPFC_UNREG_FCF))
1181 goto fail_out;
1182
1183 /* Mark successful completion of FCF table scan */
1184 spin_lock_irq(&phba->hbalock);
1185 phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE);
1186 phba->hba_flag &= ~FCF_TS_INPROG;
1187 if (vport->port_state != LPFC_FLOGI) {
1188 phba->hba_flag |= FCF_RR_INPROG;
1189 spin_unlock_irq(&phba->hbalock);
1190 lpfc_issue_init_vfi(vport);
1191 goto out;
1192 }
1193 spin_unlock_irq(&phba->hbalock);
1194 goto out;
1195
1196fail_out:
1197 spin_lock_irq(&phba->hbalock);
1198 phba->hba_flag &= ~FCF_RR_INPROG;
1199 spin_unlock_irq(&phba->hbalock);
1200out:
1201 mempool_free(mboxq, phba->mbox_mem_pool);
1202}
1203
1204/**
1205 * lpfc_fab_name_match - Check if the fcf fabric name match.
1206 * @fab_name: pointer to fabric name.
1207 * @new_fcf_record: pointer to fcf record.
1208 *
1209 * This routine compare the fcf record's fabric name with provided
1210 * fabric name. If the fabric name are identical this function
1211 * returns 1 else return 0.
1212 **/
1213static uint32_t
1214lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record)
1215{
1216 if (fab_name[0] != bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record))
1217 return 0;
1218 if (fab_name[1] != bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record))
1219 return 0;
1220 if (fab_name[2] != bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record))
1221 return 0;
1222 if (fab_name[3] != bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record))
1223 return 0;
1224 if (fab_name[4] != bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record))
1225 return 0;
1226 if (fab_name[5] != bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record))
1227 return 0;
1228 if (fab_name[6] != bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record))
1229 return 0;
1230 if (fab_name[7] != bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record))
1231 return 0;
1232 return 1;
1233}
1234
1235/**
1236 * lpfc_sw_name_match - Check if the fcf switch name match.
1237 * @fab_name: pointer to fabric name.
1238 * @new_fcf_record: pointer to fcf record.
1239 *
1240 * This routine compare the fcf record's switch name with provided
1241 * switch name. If the switch name are identical this function
1242 * returns 1 else return 0.
1243 **/
1244static uint32_t
1245lpfc_sw_name_match(uint8_t *sw_name, struct fcf_record *new_fcf_record)
1246{
1247 if (sw_name[0] != bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record))
1248 return 0;
1249 if (sw_name[1] != bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record))
1250 return 0;
1251 if (sw_name[2] != bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record))
1252 return 0;
1253 if (sw_name[3] != bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record))
1254 return 0;
1255 if (sw_name[4] != bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record))
1256 return 0;
1257 if (sw_name[5] != bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record))
1258 return 0;
1259 if (sw_name[6] != bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record))
1260 return 0;
1261 if (sw_name[7] != bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record))
1262 return 0;
1263 return 1;
1264}
1265
1266/**
1267 * lpfc_mac_addr_match - Check if the fcf mac address match.
1268 * @mac_addr: pointer to mac address.
1269 * @new_fcf_record: pointer to fcf record.
1270 *
1271 * This routine compare the fcf record's mac address with HBA's
1272 * FCF mac address. If the mac addresses are identical this function
1273 * returns 1 else return 0.
1274 **/
1275static uint32_t
1276lpfc_mac_addr_match(uint8_t *mac_addr, struct fcf_record *new_fcf_record)
1277{
1278 if (mac_addr[0] != bf_get(lpfc_fcf_record_mac_0, new_fcf_record))
1279 return 0;
1280 if (mac_addr[1] != bf_get(lpfc_fcf_record_mac_1, new_fcf_record))
1281 return 0;
1282 if (mac_addr[2] != bf_get(lpfc_fcf_record_mac_2, new_fcf_record))
1283 return 0;
1284 if (mac_addr[3] != bf_get(lpfc_fcf_record_mac_3, new_fcf_record))
1285 return 0;
1286 if (mac_addr[4] != bf_get(lpfc_fcf_record_mac_4, new_fcf_record))
1287 return 0;
1288 if (mac_addr[5] != bf_get(lpfc_fcf_record_mac_5, new_fcf_record))
1289 return 0;
1290 return 1;
1291}
1292
1293static bool
1294lpfc_vlan_id_match(uint16_t curr_vlan_id, uint16_t new_vlan_id)
1295{
1296 return (curr_vlan_id == new_vlan_id);
1297}
1298
1299/**
1300 * lpfc_update_fcf_record - Update driver fcf record
1301 * __lpfc_update_fcf_record_pri - update the lpfc_fcf_pri record.
1302 * @phba: pointer to lpfc hba data structure.
1303 * @fcf_index: Index for the lpfc_fcf_record.
1304 * @new_fcf_record: pointer to hba fcf record.
1305 *
1306 * This routine updates the driver FCF priority record from the new HBA FCF
1307 * record. This routine is called with the host lock held.
1308 **/
1309static void
1310__lpfc_update_fcf_record_pri(struct lpfc_hba *phba, uint16_t fcf_index,
1311 struct fcf_record *new_fcf_record
1312 )
1313{
1314 struct lpfc_fcf_pri *fcf_pri;
1315
1316 fcf_pri = &phba->fcf.fcf_pri[fcf_index];
1317 fcf_pri->fcf_rec.fcf_index = fcf_index;
1318 /* FCF record priority */
1319 fcf_pri->fcf_rec.priority = new_fcf_record->fip_priority;
1320
1321}
1322
1323/**
1324 * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba.
1325 * @fcf: pointer to driver fcf record.
1326 * @new_fcf_record: pointer to fcf record.
1327 *
1328 * This routine copies the FCF information from the FCF
1329 * record to lpfc_hba data structure.
1330 **/
1331static void
1332lpfc_copy_fcf_record(struct lpfc_fcf_rec *fcf_rec,
1333 struct fcf_record *new_fcf_record)
1334{
1335 /* Fabric name */
1336 fcf_rec->fabric_name[0] =
1337 bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record);
1338 fcf_rec->fabric_name[1] =
1339 bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record);
1340 fcf_rec->fabric_name[2] =
1341 bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record);
1342 fcf_rec->fabric_name[3] =
1343 bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record);
1344 fcf_rec->fabric_name[4] =
1345 bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record);
1346 fcf_rec->fabric_name[5] =
1347 bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record);
1348 fcf_rec->fabric_name[6] =
1349 bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record);
1350 fcf_rec->fabric_name[7] =
1351 bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record);
1352 /* Mac address */
1353 fcf_rec->mac_addr[0] = bf_get(lpfc_fcf_record_mac_0, new_fcf_record);
1354 fcf_rec->mac_addr[1] = bf_get(lpfc_fcf_record_mac_1, new_fcf_record);
1355 fcf_rec->mac_addr[2] = bf_get(lpfc_fcf_record_mac_2, new_fcf_record);
1356 fcf_rec->mac_addr[3] = bf_get(lpfc_fcf_record_mac_3, new_fcf_record);
1357 fcf_rec->mac_addr[4] = bf_get(lpfc_fcf_record_mac_4, new_fcf_record);
1358 fcf_rec->mac_addr[5] = bf_get(lpfc_fcf_record_mac_5, new_fcf_record);
1359 /* FCF record index */
1360 fcf_rec->fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
1361 /* FCF record priority */
1362 fcf_rec->priority = new_fcf_record->fip_priority;
1363 /* Switch name */
1364 fcf_rec->switch_name[0] =
1365 bf_get(lpfc_fcf_record_switch_name_0, new_fcf_record);
1366 fcf_rec->switch_name[1] =
1367 bf_get(lpfc_fcf_record_switch_name_1, new_fcf_record);
1368 fcf_rec->switch_name[2] =
1369 bf_get(lpfc_fcf_record_switch_name_2, new_fcf_record);
1370 fcf_rec->switch_name[3] =
1371 bf_get(lpfc_fcf_record_switch_name_3, new_fcf_record);
1372 fcf_rec->switch_name[4] =
1373 bf_get(lpfc_fcf_record_switch_name_4, new_fcf_record);
1374 fcf_rec->switch_name[5] =
1375 bf_get(lpfc_fcf_record_switch_name_5, new_fcf_record);
1376 fcf_rec->switch_name[6] =
1377 bf_get(lpfc_fcf_record_switch_name_6, new_fcf_record);
1378 fcf_rec->switch_name[7] =
1379 bf_get(lpfc_fcf_record_switch_name_7, new_fcf_record);
1380}
1381
1382/**
1383 * lpfc_update_fcf_record - Update driver fcf record
1384 * @phba: pointer to lpfc hba data structure.
1385 * @fcf_rec: pointer to driver fcf record.
1386 * @new_fcf_record: pointer to hba fcf record.
1387 * @addr_mode: address mode to be set to the driver fcf record.
1388 * @vlan_id: vlan tag to be set to the driver fcf record.
1389 * @flag: flag bits to be set to the driver fcf record.
1390 *
1391 * This routine updates the driver FCF record from the new HBA FCF record
1392 * together with the address mode, vlan_id, and other informations. This
1393 * routine is called with the host lock held.
1394 **/
1395static void
1396__lpfc_update_fcf_record(struct lpfc_hba *phba, struct lpfc_fcf_rec *fcf_rec,
1397 struct fcf_record *new_fcf_record, uint32_t addr_mode,
1398 uint16_t vlan_id, uint32_t flag)
1399{
1400 /* Copy the fields from the HBA's FCF record */
1401 lpfc_copy_fcf_record(fcf_rec, new_fcf_record);
1402 /* Update other fields of driver FCF record */
1403 fcf_rec->addr_mode = addr_mode;
1404 fcf_rec->vlan_id = vlan_id;
1405 fcf_rec->flag |= (flag | RECORD_VALID);
1406 __lpfc_update_fcf_record_pri(phba,
1407 bf_get(lpfc_fcf_record_fcf_index, new_fcf_record),
1408 new_fcf_record);
1409}
1410
1411/**
1412 * lpfc_register_fcf - Register the FCF with hba.
1413 * @phba: pointer to lpfc hba data structure.
1414 *
1415 * This routine issues a register fcfi mailbox command to register
1416 * the fcf with HBA.
1417 **/
1418static void
1419lpfc_register_fcf(struct lpfc_hba *phba)
1420{
1421 LPFC_MBOXQ_t *fcf_mbxq;
1422 int rc;
1423
1424 spin_lock_irq(&phba->hbalock);
1425 /* If the FCF is not available do nothing. */
1426 if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) {
1427 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG);
1428 spin_unlock_irq(&phba->hbalock);
1429 return;
1430 }
1431
1432 /* The FCF is already registered, start discovery */
1433 if (phba->fcf.fcf_flag & FCF_REGISTERED) {
1434 phba->fcf.fcf_flag |= (FCF_SCAN_DONE | FCF_IN_USE);
1435 phba->hba_flag &= ~FCF_TS_INPROG;
1436 if (phba->pport->port_state != LPFC_FLOGI) {
1437 phba->hba_flag |= FCF_RR_INPROG;
1438 spin_unlock_irq(&phba->hbalock);
1439 lpfc_initial_flogi(phba->pport);
1440 return;
1441 }
1442 spin_unlock_irq(&phba->hbalock);
1443 return;
1444 }
1445 spin_unlock_irq(&phba->hbalock);
1446
1447 fcf_mbxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
1448 if (!fcf_mbxq) {
1449 spin_lock_irq(&phba->hbalock);
1450 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG);
1451 spin_unlock_irq(&phba->hbalock);
1452 return;
1453 }
1454
1455 lpfc_reg_fcfi(phba, fcf_mbxq);
1456 fcf_mbxq->vport = phba->pport;
1457 fcf_mbxq->mbox_cmpl = lpfc_mbx_cmpl_reg_fcfi;
1458 rc = lpfc_sli_issue_mbox(phba, fcf_mbxq, MBX_NOWAIT);
1459 if (rc == MBX_NOT_FINISHED) {
1460 spin_lock_irq(&phba->hbalock);
1461 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG);
1462 spin_unlock_irq(&phba->hbalock);
1463 mempool_free(fcf_mbxq, phba->mbox_mem_pool);
1464 }
1465
1466 return;
1467}
1468
1469/**
1470 * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery.
1471 * @phba: pointer to lpfc hba data structure.
1472 * @new_fcf_record: pointer to fcf record.
1473 * @boot_flag: Indicates if this record used by boot bios.
1474 * @addr_mode: The address mode to be used by this FCF
1475 * @vlan_id: The vlan id to be used as vlan tagging by this FCF.
1476 *
1477 * This routine compare the fcf record with connect list obtained from the
1478 * config region to decide if this FCF can be used for SAN discovery. It returns
1479 * 1 if this record can be used for SAN discovery else return zero. If this FCF
1480 * record can be used for SAN discovery, the boot_flag will indicate if this FCF
1481 * is used by boot bios and addr_mode will indicate the addressing mode to be
1482 * used for this FCF when the function returns.
1483 * If the FCF record need to be used with a particular vlan id, the vlan is
1484 * set in the vlan_id on return of the function. If not VLAN tagging need to
1485 * be used with the FCF vlan_id will be set to LPFC_FCOE_NULL_VID;
1486 **/
1487static int
1488lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
1489 struct fcf_record *new_fcf_record,
1490 uint32_t *boot_flag, uint32_t *addr_mode,
1491 uint16_t *vlan_id)
1492{
1493 struct lpfc_fcf_conn_entry *conn_entry;
1494 int i, j, fcf_vlan_id = 0;
1495
1496 /* Find the lowest VLAN id in the FCF record */
1497 for (i = 0; i < 512; i++) {
1498 if (new_fcf_record->vlan_bitmap[i]) {
1499 fcf_vlan_id = i * 8;
1500 j = 0;
1501 while (!((new_fcf_record->vlan_bitmap[i] >> j) & 1)) {
1502 j++;
1503 fcf_vlan_id++;
1504 }
1505 break;
1506 }
1507 }
1508
1509 /* If FCF not available return 0 */
1510 if (!bf_get(lpfc_fcf_record_fcf_avail, new_fcf_record) ||
1511 !bf_get(lpfc_fcf_record_fcf_valid, new_fcf_record))
1512 return 0;
1513
1514 if (!(phba->hba_flag & HBA_FIP_SUPPORT)) {
1515 *boot_flag = 0;
1516 *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
1517 new_fcf_record);
1518 if (phba->valid_vlan)
1519 *vlan_id = phba->vlan_id;
1520 else
1521 *vlan_id = LPFC_FCOE_NULL_VID;
1522 return 1;
1523 }
1524
1525 /*
1526 * If there are no FCF connection table entry, driver connect to all
1527 * FCFs.
1528 */
1529 if (list_empty(&phba->fcf_conn_rec_list)) {
1530 *boot_flag = 0;
1531 *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
1532 new_fcf_record);
1533
1534 /*
1535 * When there are no FCF connect entries, use driver's default
1536 * addressing mode - FPMA.
1537 */
1538 if (*addr_mode & LPFC_FCF_FPMA)
1539 *addr_mode = LPFC_FCF_FPMA;
1540
1541 /* If FCF record report a vlan id use that vlan id */
1542 if (fcf_vlan_id)
1543 *vlan_id = fcf_vlan_id;
1544 else
1545 *vlan_id = LPFC_FCOE_NULL_VID;
1546 return 1;
1547 }
1548
1549 list_for_each_entry(conn_entry,
1550 &phba->fcf_conn_rec_list, list) {
1551 if (!(conn_entry->conn_rec.flags & FCFCNCT_VALID))
1552 continue;
1553
1554 if ((conn_entry->conn_rec.flags & FCFCNCT_FBNM_VALID) &&
1555 !lpfc_fab_name_match(conn_entry->conn_rec.fabric_name,
1556 new_fcf_record))
1557 continue;
1558 if ((conn_entry->conn_rec.flags & FCFCNCT_SWNM_VALID) &&
1559 !lpfc_sw_name_match(conn_entry->conn_rec.switch_name,
1560 new_fcf_record))
1561 continue;
1562 if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) {
1563 /*
1564 * If the vlan bit map does not have the bit set for the
1565 * vlan id to be used, then it is not a match.
1566 */
1567 if (!(new_fcf_record->vlan_bitmap
1568 [conn_entry->conn_rec.vlan_tag / 8] &
1569 (1 << (conn_entry->conn_rec.vlan_tag % 8))))
1570 continue;
1571 }
1572
1573 /*
1574 * If connection record does not support any addressing mode,
1575 * skip the FCF record.
1576 */
1577 if (!(bf_get(lpfc_fcf_record_mac_addr_prov, new_fcf_record)
1578 & (LPFC_FCF_FPMA | LPFC_FCF_SPMA)))
1579 continue;
1580
1581 /*
1582 * Check if the connection record specifies a required
1583 * addressing mode.
1584 */
1585 if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
1586 !(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)) {
1587
1588 /*
1589 * If SPMA required but FCF not support this continue.
1590 */
1591 if ((conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
1592 !(bf_get(lpfc_fcf_record_mac_addr_prov,
1593 new_fcf_record) & LPFC_FCF_SPMA))
1594 continue;
1595
1596 /*
1597 * If FPMA required but FCF not support this continue.
1598 */
1599 if (!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
1600 !(bf_get(lpfc_fcf_record_mac_addr_prov,
1601 new_fcf_record) & LPFC_FCF_FPMA))
1602 continue;
1603 }
1604
1605 /*
1606 * This fcf record matches filtering criteria.
1607 */
1608 if (conn_entry->conn_rec.flags & FCFCNCT_BOOT)
1609 *boot_flag = 1;
1610 else
1611 *boot_flag = 0;
1612
1613 /*
1614 * If user did not specify any addressing mode, or if the
1615 * preferred addressing mode specified by user is not supported
1616 * by FCF, allow fabric to pick the addressing mode.
1617 */
1618 *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
1619 new_fcf_record);
1620 /*
1621 * If the user specified a required address mode, assign that
1622 * address mode
1623 */
1624 if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
1625 (!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)))
1626 *addr_mode = (conn_entry->conn_rec.flags &
1627 FCFCNCT_AM_SPMA) ?
1628 LPFC_FCF_SPMA : LPFC_FCF_FPMA;
1629 /*
1630 * If the user specified a preferred address mode, use the
1631 * addr mode only if FCF support the addr_mode.
1632 */
1633 else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
1634 (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
1635 (conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
1636 (*addr_mode & LPFC_FCF_SPMA))
1637 *addr_mode = LPFC_FCF_SPMA;
1638 else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
1639 (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
1640 !(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
1641 (*addr_mode & LPFC_FCF_FPMA))
1642 *addr_mode = LPFC_FCF_FPMA;
1643
1644 /* If matching connect list has a vlan id, use it */
1645 if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID)
1646 *vlan_id = conn_entry->conn_rec.vlan_tag;
1647 /*
1648 * If no vlan id is specified in connect list, use the vlan id
1649 * in the FCF record
1650 */
1651 else if (fcf_vlan_id)
1652 *vlan_id = fcf_vlan_id;
1653 else
1654 *vlan_id = LPFC_FCOE_NULL_VID;
1655
1656 return 1;
1657 }
1658
1659 return 0;
1660}
1661
1662/**
1663 * lpfc_check_pending_fcoe_event - Check if there is pending fcoe event.
1664 * @phba: pointer to lpfc hba data structure.
1665 * @unreg_fcf: Unregister FCF if FCF table need to be re-scaned.
1666 *
1667 * This function check if there is any fcoe event pending while driver
1668 * scan FCF entries. If there is any pending event, it will restart the
1669 * FCF saning and return 1 else return 0.
1670 */
1671int
1672lpfc_check_pending_fcoe_event(struct lpfc_hba *phba, uint8_t unreg_fcf)
1673{
1674 /*
1675 * If the Link is up and no FCoE events while in the
1676 * FCF discovery, no need to restart FCF discovery.
1677 */
1678 if ((phba->link_state >= LPFC_LINK_UP) &&
1679 (phba->fcoe_eventtag == phba->fcoe_eventtag_at_fcf_scan))
1680 return 0;
1681
1682 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
1683 "2768 Pending link or FCF event during current "
1684 "handling of the previous event: link_state:x%x, "
1685 "evt_tag_at_scan:x%x, evt_tag_current:x%x\n",
1686 phba->link_state, phba->fcoe_eventtag_at_fcf_scan,
1687 phba->fcoe_eventtag);
1688
1689 spin_lock_irq(&phba->hbalock);
1690 phba->fcf.fcf_flag &= ~FCF_AVAILABLE;
1691 spin_unlock_irq(&phba->hbalock);
1692
1693 if (phba->link_state >= LPFC_LINK_UP) {
1694 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
1695 "2780 Restart FCF table scan due to "
1696 "pending FCF event:evt_tag_at_scan:x%x, "
1697 "evt_tag_current:x%x\n",
1698 phba->fcoe_eventtag_at_fcf_scan,
1699 phba->fcoe_eventtag);
1700 lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST);
1701 } else {
1702 /*
1703 * Do not continue FCF discovery and clear FCF_TS_INPROG
1704 * flag
1705 */
1706 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
1707 "2833 Stop FCF discovery process due to link "
1708 "state change (x%x)\n", phba->link_state);
1709 spin_lock_irq(&phba->hbalock);
1710 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG);
1711 phba->fcf.fcf_flag &= ~(FCF_REDISC_FOV | FCF_DISCOVERY);
1712 spin_unlock_irq(&phba->hbalock);
1713 }
1714
1715 /* Unregister the currently registered FCF if required */
1716 if (unreg_fcf) {
1717 spin_lock_irq(&phba->hbalock);
1718 phba->fcf.fcf_flag &= ~FCF_REGISTERED;
1719 spin_unlock_irq(&phba->hbalock);
1720 lpfc_sli4_unregister_fcf(phba);
1721 }
1722 return 1;
1723}
1724
1725/**
1726 * lpfc_sli4_new_fcf_random_select - Randomly select an eligible new fcf record
1727 * @phba: pointer to lpfc hba data structure.
1728 * @fcf_cnt: number of eligible fcf record seen so far.
1729 *
1730 * This function makes an running random selection decision on FCF record to
1731 * use through a sequence of @fcf_cnt eligible FCF records with equal
1732 * probability. To perform integer manunipulation of random numbers with
1733 * size unit32_t, the lower 16 bits of the 32-bit random number returned
1734 * from random32() are taken as the random random number generated.
1735 *
1736 * Returns true when outcome is for the newly read FCF record should be
1737 * chosen; otherwise, return false when outcome is for keeping the previously
1738 * chosen FCF record.
1739 **/
1740static bool
1741lpfc_sli4_new_fcf_random_select(struct lpfc_hba *phba, uint32_t fcf_cnt)
1742{
1743 uint32_t rand_num;
1744
1745 /* Get 16-bit uniform random number */
1746 rand_num = (0xFFFF & random32());
1747
1748 /* Decision with probability 1/fcf_cnt */
1749 if ((fcf_cnt * rand_num) < 0xFFFF)
1750 return true;
1751 else
1752 return false;
1753}
1754
1755/**
1756 * lpfc_sli4_fcf_rec_mbox_parse - Parse read_fcf mbox command.
1757 * @phba: pointer to lpfc hba data structure.
1758 * @mboxq: pointer to mailbox object.
1759 * @next_fcf_index: pointer to holder of next fcf index.
1760 *
1761 * This routine parses the non-embedded fcf mailbox command by performing the
1762 * necessarily error checking, non-embedded read FCF record mailbox command
1763 * SGE parsing, and endianness swapping.
1764 *
1765 * Returns the pointer to the new FCF record in the non-embedded mailbox
1766 * command DMA memory if successfully, other NULL.
1767 */
1768static struct fcf_record *
1769lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
1770 uint16_t *next_fcf_index)
1771{
1772 void *virt_addr;
1773 dma_addr_t phys_addr;
1774 struct lpfc_mbx_sge sge;
1775 struct lpfc_mbx_read_fcf_tbl *read_fcf;
1776 uint32_t shdr_status, shdr_add_status;
1777 union lpfc_sli4_cfg_shdr *shdr;
1778 struct fcf_record *new_fcf_record;
1779
1780 /* Get the first SGE entry from the non-embedded DMA memory. This
1781 * routine only uses a single SGE.
1782 */
1783 lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
1784 phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
1785 if (unlikely(!mboxq->sge_array)) {
1786 lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
1787 "2524 Failed to get the non-embedded SGE "
1788 "virtual address\n");
1789 return NULL;
1790 }
1791 virt_addr = mboxq->sge_array->addr[0];
1792
1793 shdr = (union lpfc_sli4_cfg_shdr *)virt_addr;
1794 shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
1795 shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
1796 if (shdr_status || shdr_add_status) {
1797 if (shdr_status == STATUS_FCF_TABLE_EMPTY)
1798 lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
1799 "2726 READ_FCF_RECORD Indicates empty "
1800 "FCF table.\n");
1801 else
1802 lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
1803 "2521 READ_FCF_RECORD mailbox failed "
1804 "with status x%x add_status x%x, "
1805 "mbx\n", shdr_status, shdr_add_status);
1806 return NULL;
1807 }
1808
1809 /* Interpreting the returned information of the FCF record */
1810 read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
1811 lpfc_sli_pcimem_bcopy(read_fcf, read_fcf,
1812 sizeof(struct lpfc_mbx_read_fcf_tbl));
1813 *next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf);
1814 new_fcf_record = (struct fcf_record *)(virt_addr +
1815 sizeof(struct lpfc_mbx_read_fcf_tbl));
1816 lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record,
1817 offsetof(struct fcf_record, vlan_bitmap));
1818 new_fcf_record->word137 = le32_to_cpu(new_fcf_record->word137);
1819 new_fcf_record->word138 = le32_to_cpu(new_fcf_record->word138);
1820
1821 return new_fcf_record;
1822}
1823
1824/**
1825 * lpfc_sli4_log_fcf_record_info - Log the information of a fcf record
1826 * @phba: pointer to lpfc hba data structure.
1827 * @fcf_record: pointer to the fcf record.
1828 * @vlan_id: the lowest vlan identifier associated to this fcf record.
1829 * @next_fcf_index: the index to the next fcf record in hba's fcf table.
1830 *
1831 * This routine logs the detailed FCF record if the LOG_FIP loggin is
1832 * enabled.
1833 **/
1834static void
1835lpfc_sli4_log_fcf_record_info(struct lpfc_hba *phba,
1836 struct fcf_record *fcf_record,
1837 uint16_t vlan_id,
1838 uint16_t next_fcf_index)
1839{
1840 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
1841 "2764 READ_FCF_RECORD:\n"
1842 "\tFCF_Index : x%x\n"
1843 "\tFCF_Avail : x%x\n"
1844 "\tFCF_Valid : x%x\n"
1845 "\tFIP_Priority : x%x\n"
1846 "\tMAC_Provider : x%x\n"
1847 "\tLowest VLANID : x%x\n"
1848 "\tFCF_MAC Addr : x%x:%x:%x:%x:%x:%x\n"
1849 "\tFabric_Name : x%x:%x:%x:%x:%x:%x:%x:%x\n"
1850 "\tSwitch_Name : x%x:%x:%x:%x:%x:%x:%x:%x\n"
1851 "\tNext_FCF_Index: x%x\n",
1852 bf_get(lpfc_fcf_record_fcf_index, fcf_record),
1853 bf_get(lpfc_fcf_record_fcf_avail, fcf_record),
1854 bf_get(lpfc_fcf_record_fcf_valid, fcf_record),
1855 fcf_record->fip_priority,
1856 bf_get(lpfc_fcf_record_mac_addr_prov, fcf_record),
1857 vlan_id,
1858 bf_get(lpfc_fcf_record_mac_0, fcf_record),
1859 bf_get(lpfc_fcf_record_mac_1, fcf_record),
1860 bf_get(lpfc_fcf_record_mac_2, fcf_record),
1861 bf_get(lpfc_fcf_record_mac_3, fcf_record),
1862 bf_get(lpfc_fcf_record_mac_4, fcf_record),
1863 bf_get(lpfc_fcf_record_mac_5, fcf_record),
1864 bf_get(lpfc_fcf_record_fab_name_0, fcf_record),
1865 bf_get(lpfc_fcf_record_fab_name_1, fcf_record),
1866 bf_get(lpfc_fcf_record_fab_name_2, fcf_record),
1867 bf_get(lpfc_fcf_record_fab_name_3, fcf_record),
1868 bf_get(lpfc_fcf_record_fab_name_4, fcf_record),
1869 bf_get(lpfc_fcf_record_fab_name_5, fcf_record),
1870 bf_get(lpfc_fcf_record_fab_name_6, fcf_record),
1871 bf_get(lpfc_fcf_record_fab_name_7, fcf_record),
1872 bf_get(lpfc_fcf_record_switch_name_0, fcf_record),
1873 bf_get(lpfc_fcf_record_switch_name_1, fcf_record),
1874 bf_get(lpfc_fcf_record_switch_name_2, fcf_record),
1875 bf_get(lpfc_fcf_record_switch_name_3, fcf_record),
1876 bf_get(lpfc_fcf_record_switch_name_4, fcf_record),
1877 bf_get(lpfc_fcf_record_switch_name_5, fcf_record),
1878 bf_get(lpfc_fcf_record_switch_name_6, fcf_record),
1879 bf_get(lpfc_fcf_record_switch_name_7, fcf_record),
1880 next_fcf_index);
1881}
1882
1883/**
1884 lpfc_sli4_fcf_record_match - testing new FCF record for matching existing FCF
1885 * @phba: pointer to lpfc hba data structure.
1886 * @fcf_rec: pointer to an existing FCF record.
1887 * @new_fcf_record: pointer to a new FCF record.
1888 * @new_vlan_id: vlan id from the new FCF record.
1889 *
1890 * This function performs matching test of a new FCF record against an existing
1891 * FCF record. If the new_vlan_id passed in is LPFC_FCOE_IGNORE_VID, vlan id
1892 * will not be used as part of the FCF record matching criteria.
1893 *
1894 * Returns true if all the fields matching, otherwise returns false.
1895 */
1896static bool
1897lpfc_sli4_fcf_record_match(struct lpfc_hba *phba,
1898 struct lpfc_fcf_rec *fcf_rec,
1899 struct fcf_record *new_fcf_record,
1900 uint16_t new_vlan_id)
1901{
1902 if (new_vlan_id != LPFC_FCOE_IGNORE_VID)
1903 if (!lpfc_vlan_id_match(fcf_rec->vlan_id, new_vlan_id))
1904 return false;
1905 if (!lpfc_mac_addr_match(fcf_rec->mac_addr, new_fcf_record))
1906 return false;
1907 if (!lpfc_sw_name_match(fcf_rec->switch_name, new_fcf_record))
1908 return false;
1909 if (!lpfc_fab_name_match(fcf_rec->fabric_name, new_fcf_record))
1910 return false;
1911 if (fcf_rec->priority != new_fcf_record->fip_priority)
1912 return false;
1913 return true;
1914}
1915
1916/**
1917 * lpfc_sli4_fcf_rr_next_proc - processing next roundrobin fcf
1918 * @vport: Pointer to vport object.
1919 * @fcf_index: index to next fcf.
1920 *
1921 * This function processing the roundrobin fcf failover to next fcf index.
1922 * When this function is invoked, there will be a current fcf registered
1923 * for flogi.
1924 * Return: 0 for continue retrying flogi on currently registered fcf;
1925 * 1 for stop flogi on currently registered fcf;
1926 */
1927int lpfc_sli4_fcf_rr_next_proc(struct lpfc_vport *vport, uint16_t fcf_index)
1928{
1929 struct lpfc_hba *phba = vport->phba;
1930 int rc;
1931
1932 if (fcf_index == LPFC_FCOE_FCF_NEXT_NONE) {
1933 spin_lock_irq(&phba->hbalock);
1934 if (phba->hba_flag & HBA_DEVLOSS_TMO) {
1935 spin_unlock_irq(&phba->hbalock);
1936 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
1937 "2872 Devloss tmo with no eligible "
1938 "FCF, unregister in-use FCF (x%x) "
1939 "and rescan FCF table\n",
1940 phba->fcf.current_rec.fcf_indx);
1941 lpfc_unregister_fcf_rescan(phba);
1942 goto stop_flogi_current_fcf;
1943 }
1944 /* Mark the end to FLOGI roundrobin failover */
1945 phba->hba_flag &= ~FCF_RR_INPROG;
1946 /* Allow action to new fcf asynchronous event */
1947 phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE);
1948 spin_unlock_irq(&phba->hbalock);
1949 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
1950 "2865 No FCF available, stop roundrobin FCF "
1951 "failover and change port state:x%x/x%x\n",
1952 phba->pport->port_state, LPFC_VPORT_UNKNOWN);
1953 phba->pport->port_state = LPFC_VPORT_UNKNOWN;
1954 goto stop_flogi_current_fcf;
1955 } else {
1956 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_ELS,
1957 "2794 Try FLOGI roundrobin FCF failover to "
1958 "(x%x)\n", fcf_index);
1959 rc = lpfc_sli4_fcf_rr_read_fcf_rec(phba, fcf_index);
1960 if (rc)
1961 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS,
1962 "2761 FLOGI roundrobin FCF failover "
1963 "failed (rc:x%x) to read FCF (x%x)\n",
1964 rc, phba->fcf.current_rec.fcf_indx);
1965 else
1966 goto stop_flogi_current_fcf;
1967 }
1968 return 0;
1969
1970stop_flogi_current_fcf:
1971 lpfc_can_disctmo(vport);
1972 return 1;
1973}
1974
1975/**
1976 * lpfc_sli4_fcf_pri_list_del
1977 * @phba: pointer to lpfc hba data structure.
1978 * @fcf_index the index of the fcf record to delete
1979 * This routine checks the on list flag of the fcf_index to be deleted.
1980 * If it is one the list then it is removed from the list, and the flag
1981 * is cleared. This routine grab the hbalock before removing the fcf
1982 * record from the list.
1983 **/
1984static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba,
1985 uint16_t fcf_index)
1986{
1987 struct lpfc_fcf_pri *new_fcf_pri;
1988
1989 new_fcf_pri = &phba->fcf.fcf_pri[fcf_index];
1990 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
1991 "3058 deleting idx x%x pri x%x flg x%x\n",
1992 fcf_index, new_fcf_pri->fcf_rec.priority,
1993 new_fcf_pri->fcf_rec.flag);
1994 spin_lock_irq(&phba->hbalock);
1995 if (new_fcf_pri->fcf_rec.flag & LPFC_FCF_ON_PRI_LIST) {
1996 if (phba->fcf.current_rec.priority ==
1997 new_fcf_pri->fcf_rec.priority)
1998 phba->fcf.eligible_fcf_cnt--;
1999 list_del_init(&new_fcf_pri->list);
2000 new_fcf_pri->fcf_rec.flag &= ~LPFC_FCF_ON_PRI_LIST;
2001 }
2002 spin_unlock_irq(&phba->hbalock);
2003}
2004
2005/**
2006 * lpfc_sli4_set_fcf_flogi_fail
2007 * @phba: pointer to lpfc hba data structure.
2008 * @fcf_index the index of the fcf record to update
2009 * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
2010 * flag so the the round robin slection for the particular priority level
2011 * will try a different fcf record that does not have this bit set.
2012 * If the fcf record is re-read for any reason this flag is cleared brfore
2013 * adding it to the priority list.
2014 **/
2015void
2016lpfc_sli4_set_fcf_flogi_fail(struct lpfc_hba *phba, uint16_t fcf_index)
2017{
2018 struct lpfc_fcf_pri *new_fcf_pri;
2019 new_fcf_pri = &phba->fcf.fcf_pri[fcf_index];
2020 spin_lock_irq(&phba->hbalock);
2021 new_fcf_pri->fcf_rec.flag |= LPFC_FCF_FLOGI_FAILED;
2022 spin_unlock_irq(&phba->hbalock);
2023}
2024
2025/**
2026 * lpfc_sli4_fcf_pri_list_add
2027 * @phba: pointer to lpfc hba data structure.
2028 * @fcf_index the index of the fcf record to add
2029 * This routine checks the priority of the fcf_index to be added.
2030 * If it is a lower priority than the current head of the fcf_pri list
2031 * then it is added to the list in the right order.
2032 * If it is the same priority as the current head of the list then it
2033 * is added to the head of the list and its bit in the rr_bmask is set.
2034 * If the fcf_index to be added is of a higher priority than the current
2035 * head of the list then the rr_bmask is cleared, its bit is set in the
2036 * rr_bmask and it is added to the head of the list.
2037 * returns:
2038 * 0=success 1=failure
2039 **/
2040int lpfc_sli4_fcf_pri_list_add(struct lpfc_hba *phba, uint16_t fcf_index,
2041 struct fcf_record *new_fcf_record)
2042{
2043 uint16_t current_fcf_pri;
2044 uint16_t last_index;
2045 struct lpfc_fcf_pri *fcf_pri;
2046 struct lpfc_fcf_pri *next_fcf_pri;
2047 struct lpfc_fcf_pri *new_fcf_pri;
2048 int ret;
2049
2050 new_fcf_pri = &phba->fcf.fcf_pri[fcf_index];
2051 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2052 "3059 adding idx x%x pri x%x flg x%x\n",
2053 fcf_index, new_fcf_record->fip_priority,
2054 new_fcf_pri->fcf_rec.flag);
2055 spin_lock_irq(&phba->hbalock);
2056 if (new_fcf_pri->fcf_rec.flag & LPFC_FCF_ON_PRI_LIST)
2057 list_del_init(&new_fcf_pri->list);
2058 new_fcf_pri->fcf_rec.fcf_index = fcf_index;
2059 new_fcf_pri->fcf_rec.priority = new_fcf_record->fip_priority;
2060 if (list_empty(&phba->fcf.fcf_pri_list)) {
2061 list_add(&new_fcf_pri->list, &phba->fcf.fcf_pri_list);
2062 ret = lpfc_sli4_fcf_rr_index_set(phba,
2063 new_fcf_pri->fcf_rec.fcf_index);
2064 goto out;
2065 }
2066
2067 last_index = find_first_bit(phba->fcf.fcf_rr_bmask,
2068 LPFC_SLI4_FCF_TBL_INDX_MAX);
2069 if (last_index >= LPFC_SLI4_FCF_TBL_INDX_MAX) {
2070 ret = 0; /* Empty rr list */
2071 goto out;
2072 }
2073 current_fcf_pri = phba->fcf.fcf_pri[last_index].fcf_rec.priority;
2074 if (new_fcf_pri->fcf_rec.priority <= current_fcf_pri) {
2075 list_add(&new_fcf_pri->list, &phba->fcf.fcf_pri_list);
2076 if (new_fcf_pri->fcf_rec.priority < current_fcf_pri) {
2077 memset(phba->fcf.fcf_rr_bmask, 0,
2078 sizeof(*phba->fcf.fcf_rr_bmask));
2079 /* fcfs_at_this_priority_level = 1; */
2080 phba->fcf.eligible_fcf_cnt = 1;
2081 } else
2082 /* fcfs_at_this_priority_level++; */
2083 phba->fcf.eligible_fcf_cnt++;
2084 ret = lpfc_sli4_fcf_rr_index_set(phba,
2085 new_fcf_pri->fcf_rec.fcf_index);
2086 goto out;
2087 }
2088
2089 list_for_each_entry_safe(fcf_pri, next_fcf_pri,
2090 &phba->fcf.fcf_pri_list, list) {
2091 if (new_fcf_pri->fcf_rec.priority <=
2092 fcf_pri->fcf_rec.priority) {
2093 if (fcf_pri->list.prev == &phba->fcf.fcf_pri_list)
2094 list_add(&new_fcf_pri->list,
2095 &phba->fcf.fcf_pri_list);
2096 else
2097 list_add(&new_fcf_pri->list,
2098 &((struct lpfc_fcf_pri *)
2099 fcf_pri->list.prev)->list);
2100 ret = 0;
2101 goto out;
2102 } else if (fcf_pri->list.next == &phba->fcf.fcf_pri_list
2103 || new_fcf_pri->fcf_rec.priority <
2104 next_fcf_pri->fcf_rec.priority) {
2105 list_add(&new_fcf_pri->list, &fcf_pri->list);
2106 ret = 0;
2107 goto out;
2108 }
2109 if (new_fcf_pri->fcf_rec.priority > fcf_pri->fcf_rec.priority)
2110 continue;
2111
2112 }
2113 ret = 1;
2114out:
2115 /* we use = instead of |= to clear the FLOGI_FAILED flag. */
2116 new_fcf_pri->fcf_rec.flag = LPFC_FCF_ON_PRI_LIST;
2117 spin_unlock_irq(&phba->hbalock);
2118 return ret;
2119}
2120
2121/**
2122 * lpfc_mbx_cmpl_fcf_scan_read_fcf_rec - fcf scan read_fcf mbox cmpl handler.
2123 * @phba: pointer to lpfc hba data structure.
2124 * @mboxq: pointer to mailbox object.
2125 *
2126 * This function iterates through all the fcf records available in
2127 * HBA and chooses the optimal FCF record for discovery. After finding
2128 * the FCF for discovery it registers the FCF record and kicks start
2129 * discovery.
2130 * If FCF_IN_USE flag is set in currently used FCF, the routine tries to
2131 * use an FCF record which matches fabric name and mac address of the
2132 * currently used FCF record.
2133 * If the driver supports only one FCF, it will try to use the FCF record
2134 * used by BOOT_BIOS.
2135 */
2136void
2137lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
2138{
2139 struct fcf_record *new_fcf_record;
2140 uint32_t boot_flag, addr_mode;
2141 uint16_t fcf_index, next_fcf_index;
2142 struct lpfc_fcf_rec *fcf_rec = NULL;
2143 uint16_t vlan_id;
2144 uint32_t seed;
2145 bool select_new_fcf;
2146 int rc;
2147
2148 /* If there is pending FCoE event restart FCF table scan */
2149 if (lpfc_check_pending_fcoe_event(phba, LPFC_SKIP_UNREG_FCF)) {
2150 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2151 return;
2152 }
2153
2154 /* Parse the FCF record from the non-embedded mailbox command */
2155 new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq,
2156 &next_fcf_index);
2157 if (!new_fcf_record) {
2158 lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
2159 "2765 Mailbox command READ_FCF_RECORD "
2160 "failed to retrieve a FCF record.\n");
2161 /* Let next new FCF event trigger fast failover */
2162 spin_lock_irq(&phba->hbalock);
2163 phba->hba_flag &= ~FCF_TS_INPROG;
2164 spin_unlock_irq(&phba->hbalock);
2165 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2166 return;
2167 }
2168
2169 /* Check the FCF record against the connection list */
2170 rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag,
2171 &addr_mode, &vlan_id);
2172
2173 /* Log the FCF record information if turned on */
2174 lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id,
2175 next_fcf_index);
2176
2177 /*
2178 * If the fcf record does not match with connect list entries
2179 * read the next entry; otherwise, this is an eligible FCF
2180 * record for roundrobin FCF failover.
2181 */
2182 if (!rc) {
2183 lpfc_sli4_fcf_pri_list_del(phba,
2184 bf_get(lpfc_fcf_record_fcf_index,
2185 new_fcf_record));
2186 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
2187 "2781 FCF (x%x) failed connection "
2188 "list check: (x%x/x%x)\n",
2189 bf_get(lpfc_fcf_record_fcf_index,
2190 new_fcf_record),
2191 bf_get(lpfc_fcf_record_fcf_avail,
2192 new_fcf_record),
2193 bf_get(lpfc_fcf_record_fcf_valid,
2194 new_fcf_record));
2195 if ((phba->fcf.fcf_flag & FCF_IN_USE) &&
2196 lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec,
2197 new_fcf_record, LPFC_FCOE_IGNORE_VID)) {
2198 if (bf_get(lpfc_fcf_record_fcf_index, new_fcf_record) !=
2199 phba->fcf.current_rec.fcf_indx) {
2200 lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
2201 "2862 FCF (x%x) matches property "
2202 "of in-use FCF (x%x)\n",
2203 bf_get(lpfc_fcf_record_fcf_index,
2204 new_fcf_record),
2205 phba->fcf.current_rec.fcf_indx);
2206 goto read_next_fcf;
2207 }
2208 /*
2209 * In case the current in-use FCF record becomes
2210 * invalid/unavailable during FCF discovery that
2211 * was not triggered by fast FCF failover process,
2212 * treat it as fast FCF failover.
2213 */
2214 if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND) &&
2215 !(phba->fcf.fcf_flag & FCF_REDISC_FOV)) {
2216 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
2217 "2835 Invalid in-use FCF "
2218 "(x%x), enter FCF failover "
2219 "table scan.\n",
2220 phba->fcf.current_rec.fcf_indx);
2221 spin_lock_irq(&phba->hbalock);
2222 phba->fcf.fcf_flag |= FCF_REDISC_FOV;
2223 spin_unlock_irq(&phba->hbalock);
2224 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2225 lpfc_sli4_fcf_scan_read_fcf_rec(phba,
2226 LPFC_FCOE_FCF_GET_FIRST);
2227 return;
2228 }
2229 }
2230 goto read_next_fcf;
2231 } else {
2232 fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
2233 rc = lpfc_sli4_fcf_pri_list_add(phba, fcf_index,
2234 new_fcf_record);
2235 if (rc)
2236 goto read_next_fcf;
2237 }
2238
2239 /*
2240 * If this is not the first FCF discovery of the HBA, use last
2241 * FCF record for the discovery. The condition that a rescan
2242 * matches the in-use FCF record: fabric name, switch name, mac
2243 * address, and vlan_id.
2244 */
2245 spin_lock_irq(&phba->hbalock);
2246 if (phba->fcf.fcf_flag & FCF_IN_USE) {
2247 if (phba->cfg_fcf_failover_policy == LPFC_FCF_FOV &&
2248 lpfc_sli4_fcf_record_match(phba, &phba->fcf.current_rec,
2249 new_fcf_record, vlan_id)) {
2250 if (bf_get(lpfc_fcf_record_fcf_index, new_fcf_record) ==
2251 phba->fcf.current_rec.fcf_indx) {
2252 phba->fcf.fcf_flag |= FCF_AVAILABLE;
2253 if (phba->fcf.fcf_flag & FCF_REDISC_PEND)
2254 /* Stop FCF redisc wait timer */
2255 __lpfc_sli4_stop_fcf_redisc_wait_timer(
2256 phba);
2257 else if (phba->fcf.fcf_flag & FCF_REDISC_FOV)
2258 /* Fast failover, mark completed */
2259 phba->fcf.fcf_flag &= ~FCF_REDISC_FOV;
2260 spin_unlock_irq(&phba->hbalock);
2261 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2262 "2836 New FCF matches in-use "
2263 "FCF (x%x)\n",
2264 phba->fcf.current_rec.fcf_indx);
2265 goto out;
2266 } else
2267 lpfc_printf_log(phba, KERN_ERR, LOG_FIP,
2268 "2863 New FCF (x%x) matches "
2269 "property of in-use FCF (x%x)\n",
2270 bf_get(lpfc_fcf_record_fcf_index,
2271 new_fcf_record),
2272 phba->fcf.current_rec.fcf_indx);
2273 }
2274 /*
2275 * Read next FCF record from HBA searching for the matching
2276 * with in-use record only if not during the fast failover
2277 * period. In case of fast failover period, it shall try to
2278 * determine whether the FCF record just read should be the
2279 * next candidate.
2280 */
2281 if (!(phba->fcf.fcf_flag & FCF_REDISC_FOV)) {
2282 spin_unlock_irq(&phba->hbalock);
2283 goto read_next_fcf;
2284 }
2285 }
2286 /*
2287 * Update on failover FCF record only if it's in FCF fast-failover
2288 * period; otherwise, update on current FCF record.
2289 */
2290 if (phba->fcf.fcf_flag & FCF_REDISC_FOV)
2291 fcf_rec = &phba->fcf.failover_rec;
2292 else
2293 fcf_rec = &phba->fcf.current_rec;
2294
2295 if (phba->fcf.fcf_flag & FCF_AVAILABLE) {
2296 /*
2297 * If the driver FCF record does not have boot flag
2298 * set and new hba fcf record has boot flag set, use
2299 * the new hba fcf record.
2300 */
2301 if (boot_flag && !(fcf_rec->flag & BOOT_ENABLE)) {
2302 /* Choose this FCF record */
2303 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2304 "2837 Update current FCF record "
2305 "(x%x) with new FCF record (x%x)\n",
2306 fcf_rec->fcf_indx,
2307 bf_get(lpfc_fcf_record_fcf_index,
2308 new_fcf_record));
2309 __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record,
2310 addr_mode, vlan_id, BOOT_ENABLE);
2311 spin_unlock_irq(&phba->hbalock);
2312 goto read_next_fcf;
2313 }
2314 /*
2315 * If the driver FCF record has boot flag set and the
2316 * new hba FCF record does not have boot flag, read
2317 * the next FCF record.
2318 */
2319 if (!boot_flag && (fcf_rec->flag & BOOT_ENABLE)) {
2320 spin_unlock_irq(&phba->hbalock);
2321 goto read_next_fcf;
2322 }
2323 /*
2324 * If the new hba FCF record has lower priority value
2325 * than the driver FCF record, use the new record.
2326 */
2327 if (new_fcf_record->fip_priority < fcf_rec->priority) {
2328 /* Choose the new FCF record with lower priority */
2329 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2330 "2838 Update current FCF record "
2331 "(x%x) with new FCF record (x%x)\n",
2332 fcf_rec->fcf_indx,
2333 bf_get(lpfc_fcf_record_fcf_index,
2334 new_fcf_record));
2335 __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record,
2336 addr_mode, vlan_id, 0);
2337 /* Reset running random FCF selection count */
2338 phba->fcf.eligible_fcf_cnt = 1;
2339 } else if (new_fcf_record->fip_priority == fcf_rec->priority) {
2340 /* Update running random FCF selection count */
2341 phba->fcf.eligible_fcf_cnt++;
2342 select_new_fcf = lpfc_sli4_new_fcf_random_select(phba,
2343 phba->fcf.eligible_fcf_cnt);
2344 if (select_new_fcf) {
2345 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2346 "2839 Update current FCF record "
2347 "(x%x) with new FCF record (x%x)\n",
2348 fcf_rec->fcf_indx,
2349 bf_get(lpfc_fcf_record_fcf_index,
2350 new_fcf_record));
2351 /* Choose the new FCF by random selection */
2352 __lpfc_update_fcf_record(phba, fcf_rec,
2353 new_fcf_record,
2354 addr_mode, vlan_id, 0);
2355 }
2356 }
2357 spin_unlock_irq(&phba->hbalock);
2358 goto read_next_fcf;
2359 }
2360 /*
2361 * This is the first suitable FCF record, choose this record for
2362 * initial best-fit FCF.
2363 */
2364 if (fcf_rec) {
2365 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2366 "2840 Update initial FCF candidate "
2367 "with FCF (x%x)\n",
2368 bf_get(lpfc_fcf_record_fcf_index,
2369 new_fcf_record));
2370 __lpfc_update_fcf_record(phba, fcf_rec, new_fcf_record,
2371 addr_mode, vlan_id, (boot_flag ?
2372 BOOT_ENABLE : 0));
2373 phba->fcf.fcf_flag |= FCF_AVAILABLE;
2374 /* Setup initial running random FCF selection count */
2375 phba->fcf.eligible_fcf_cnt = 1;
2376 /* Seeding the random number generator for random selection */
2377 seed = (uint32_t)(0xFFFFFFFF & jiffies);
2378 srandom32(seed);
2379 }
2380 spin_unlock_irq(&phba->hbalock);
2381 goto read_next_fcf;
2382
2383read_next_fcf:
2384 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2385 if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0) {
2386 if (phba->fcf.fcf_flag & FCF_REDISC_FOV) {
2387 /*
2388 * Case of FCF fast failover scan
2389 */
2390
2391 /*
2392 * It has not found any suitable FCF record, cancel
2393 * FCF scan inprogress, and do nothing
2394 */
2395 if (!(phba->fcf.failover_rec.flag & RECORD_VALID)) {
2396 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
2397 "2782 No suitable FCF found: "
2398 "(x%x/x%x)\n",
2399 phba->fcoe_eventtag_at_fcf_scan,
2400 bf_get(lpfc_fcf_record_fcf_index,
2401 new_fcf_record));
2402 spin_lock_irq(&phba->hbalock);
2403 if (phba->hba_flag & HBA_DEVLOSS_TMO) {
2404 phba->hba_flag &= ~FCF_TS_INPROG;
2405 spin_unlock_irq(&phba->hbalock);
2406 /* Unregister in-use FCF and rescan */
2407 lpfc_printf_log(phba, KERN_INFO,
2408 LOG_FIP,
2409 "2864 On devloss tmo "
2410 "unreg in-use FCF and "
2411 "rescan FCF table\n");
2412 lpfc_unregister_fcf_rescan(phba);
2413 return;
2414 }
2415 /*
2416 * Let next new FCF event trigger fast failover
2417 */
2418 phba->hba_flag &= ~FCF_TS_INPROG;
2419 spin_unlock_irq(&phba->hbalock);
2420 return;
2421 }
2422 /*
2423 * It has found a suitable FCF record that is not
2424 * the same as in-use FCF record, unregister the
2425 * in-use FCF record, replace the in-use FCF record
2426 * with the new FCF record, mark FCF fast failover
2427 * completed, and then start register the new FCF
2428 * record.
2429 */
2430
2431 /* Unregister the current in-use FCF record */
2432 lpfc_unregister_fcf(phba);
2433
2434 /* Replace in-use record with the new record */
2435 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2436 "2842 Replace in-use FCF (x%x) "
2437 "with failover FCF (x%x)\n",
2438 phba->fcf.current_rec.fcf_indx,
2439 phba->fcf.failover_rec.fcf_indx);
2440 memcpy(&phba->fcf.current_rec,
2441 &phba->fcf.failover_rec,
2442 sizeof(struct lpfc_fcf_rec));
2443 /*
2444 * Mark the fast FCF failover rediscovery completed
2445 * and the start of the first round of the roundrobin
2446 * FCF failover.
2447 */
2448 spin_lock_irq(&phba->hbalock);
2449 phba->fcf.fcf_flag &= ~FCF_REDISC_FOV;
2450 spin_unlock_irq(&phba->hbalock);
2451 /* Register to the new FCF record */
2452 lpfc_register_fcf(phba);
2453 } else {
2454 /*
2455 * In case of transaction period to fast FCF failover,
2456 * do nothing when search to the end of the FCF table.
2457 */
2458 if ((phba->fcf.fcf_flag & FCF_REDISC_EVT) ||
2459 (phba->fcf.fcf_flag & FCF_REDISC_PEND))
2460 return;
2461
2462 if (phba->cfg_fcf_failover_policy == LPFC_FCF_FOV &&
2463 phba->fcf.fcf_flag & FCF_IN_USE) {
2464 /*
2465 * In case the current in-use FCF record no
2466 * longer existed during FCF discovery that
2467 * was not triggered by fast FCF failover
2468 * process, treat it as fast FCF failover.
2469 */
2470 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2471 "2841 In-use FCF record (x%x) "
2472 "not reported, entering fast "
2473 "FCF failover mode scanning.\n",
2474 phba->fcf.current_rec.fcf_indx);
2475 spin_lock_irq(&phba->hbalock);
2476 phba->fcf.fcf_flag |= FCF_REDISC_FOV;
2477 spin_unlock_irq(&phba->hbalock);
2478 lpfc_sli4_fcf_scan_read_fcf_rec(phba,
2479 LPFC_FCOE_FCF_GET_FIRST);
2480 return;
2481 }
2482 /* Register to the new FCF record */
2483 lpfc_register_fcf(phba);
2484 }
2485 } else
2486 lpfc_sli4_fcf_scan_read_fcf_rec(phba, next_fcf_index);
2487 return;
2488
2489out:
2490 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2491 lpfc_register_fcf(phba);
2492
2493 return;
2494}
2495
2496/**
2497 * lpfc_mbx_cmpl_fcf_rr_read_fcf_rec - fcf roundrobin read_fcf mbox cmpl hdler
2498 * @phba: pointer to lpfc hba data structure.
2499 * @mboxq: pointer to mailbox object.
2500 *
2501 * This is the callback function for FLOGI failure roundrobin FCF failover
2502 * read FCF record mailbox command from the eligible FCF record bmask for
2503 * performing the failover. If the FCF read back is not valid/available, it
2504 * fails through to retrying FLOGI to the currently registered FCF again.
2505 * Otherwise, if the FCF read back is valid and available, it will set the
2506 * newly read FCF record to the failover FCF record, unregister currently
2507 * registered FCF record, copy the failover FCF record to the current
2508 * FCF record, and then register the current FCF record before proceeding
2509 * to trying FLOGI on the new failover FCF.
2510 */
2511void
2512lpfc_mbx_cmpl_fcf_rr_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
2513{
2514 struct fcf_record *new_fcf_record;
2515 uint32_t boot_flag, addr_mode;
2516 uint16_t next_fcf_index, fcf_index;
2517 uint16_t current_fcf_index;
2518 uint16_t vlan_id;
2519 int rc;
2520
2521 /* If link state is not up, stop the roundrobin failover process */
2522 if (phba->link_state < LPFC_LINK_UP) {
2523 spin_lock_irq(&phba->hbalock);
2524 phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
2525 phba->hba_flag &= ~FCF_RR_INPROG;
2526 spin_unlock_irq(&phba->hbalock);
2527 goto out;
2528 }
2529
2530 /* Parse the FCF record from the non-embedded mailbox command */
2531 new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq,
2532 &next_fcf_index);
2533 if (!new_fcf_record) {
2534 lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
2535 "2766 Mailbox command READ_FCF_RECORD "
2536 "failed to retrieve a FCF record.\n");
2537 goto error_out;
2538 }
2539
2540 /* Get the needed parameters from FCF record */
2541 rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag,
2542 &addr_mode, &vlan_id);
2543
2544 /* Log the FCF record information if turned on */
2545 lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id,
2546 next_fcf_index);
2547
2548 fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
2549 if (!rc) {
2550 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2551 "2848 Remove ineligible FCF (x%x) from "
2552 "from roundrobin bmask\n", fcf_index);
2553 /* Clear roundrobin bmask bit for ineligible FCF */
2554 lpfc_sli4_fcf_rr_index_clear(phba, fcf_index);
2555 /* Perform next round of roundrobin FCF failover */
2556 fcf_index = lpfc_sli4_fcf_rr_next_index_get(phba);
2557 rc = lpfc_sli4_fcf_rr_next_proc(phba->pport, fcf_index);
2558 if (rc)
2559 goto out;
2560 goto error_out;
2561 }
2562
2563 if (fcf_index == phba->fcf.current_rec.fcf_indx) {
2564 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2565 "2760 Perform FLOGI roundrobin FCF failover: "
2566 "FCF (x%x) back to FCF (x%x)\n",
2567 phba->fcf.current_rec.fcf_indx, fcf_index);
2568 /* Wait 500 ms before retrying FLOGI to current FCF */
2569 msleep(500);
2570 lpfc_issue_init_vfi(phba->pport);
2571 goto out;
2572 }
2573
2574 /* Upload new FCF record to the failover FCF record */
2575 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2576 "2834 Update current FCF (x%x) with new FCF (x%x)\n",
2577 phba->fcf.failover_rec.fcf_indx, fcf_index);
2578 spin_lock_irq(&phba->hbalock);
2579 __lpfc_update_fcf_record(phba, &phba->fcf.failover_rec,
2580 new_fcf_record, addr_mode, vlan_id,
2581 (boot_flag ? BOOT_ENABLE : 0));
2582 spin_unlock_irq(&phba->hbalock);
2583
2584 current_fcf_index = phba->fcf.current_rec.fcf_indx;
2585
2586 /* Unregister the current in-use FCF record */
2587 lpfc_unregister_fcf(phba);
2588
2589 /* Replace in-use record with the new record */
2590 memcpy(&phba->fcf.current_rec, &phba->fcf.failover_rec,
2591 sizeof(struct lpfc_fcf_rec));
2592
2593 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2594 "2783 Perform FLOGI roundrobin FCF failover: FCF "
2595 "(x%x) to FCF (x%x)\n", current_fcf_index, fcf_index);
2596
2597error_out:
2598 lpfc_register_fcf(phba);
2599out:
2600 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2601}
2602
2603/**
2604 * lpfc_mbx_cmpl_read_fcf_rec - read fcf completion handler.
2605 * @phba: pointer to lpfc hba data structure.
2606 * @mboxq: pointer to mailbox object.
2607 *
2608 * This is the callback function of read FCF record mailbox command for
2609 * updating the eligible FCF bmask for FLOGI failure roundrobin FCF
2610 * failover when a new FCF event happened. If the FCF read back is
2611 * valid/available and it passes the connection list check, it updates
2612 * the bmask for the eligible FCF record for roundrobin failover.
2613 */
2614void
2615lpfc_mbx_cmpl_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
2616{
2617 struct fcf_record *new_fcf_record;
2618 uint32_t boot_flag, addr_mode;
2619 uint16_t fcf_index, next_fcf_index;
2620 uint16_t vlan_id;
2621 int rc;
2622
2623 /* If link state is not up, no need to proceed */
2624 if (phba->link_state < LPFC_LINK_UP)
2625 goto out;
2626
2627 /* If FCF discovery period is over, no need to proceed */
2628 if (!(phba->fcf.fcf_flag & FCF_DISCOVERY))
2629 goto out;
2630
2631 /* Parse the FCF record from the non-embedded mailbox command */
2632 new_fcf_record = lpfc_sli4_fcf_rec_mbox_parse(phba, mboxq,
2633 &next_fcf_index);
2634 if (!new_fcf_record) {
2635 lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
2636 "2767 Mailbox command READ_FCF_RECORD "
2637 "failed to retrieve a FCF record.\n");
2638 goto out;
2639 }
2640
2641 /* Check the connection list for eligibility */
2642 rc = lpfc_match_fcf_conn_list(phba, new_fcf_record, &boot_flag,
2643 &addr_mode, &vlan_id);
2644
2645 /* Log the FCF record information if turned on */
2646 lpfc_sli4_log_fcf_record_info(phba, new_fcf_record, vlan_id,
2647 next_fcf_index);
2648
2649 if (!rc)
2650 goto out;
2651
2652 /* Update the eligible FCF record index bmask */
2653 fcf_index = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
2654
2655 rc = lpfc_sli4_fcf_pri_list_add(phba, fcf_index, new_fcf_record);
2656
2657out:
2658 lpfc_sli4_mbox_cmd_free(phba, mboxq);
2659}
2660
2661/**
2662 * lpfc_init_vfi_cmpl - Completion handler for init_vfi mbox command.
2663 * @phba: pointer to lpfc hba data structure.
2664 * @mboxq: pointer to mailbox data structure.
2665 *
2666 * This function handles completion of init vfi mailbox command.
2667 */
2668void
2669lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
2670{
2671 struct lpfc_vport *vport = mboxq->vport;
2672
2673 /*
2674 * VFI not supported on interface type 0, just do the flogi
2675 * Also continue if the VFI is in use - just use the same one.
2676 */
2677 if (mboxq->u.mb.mbxStatus &&
2678 (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
2679 LPFC_SLI_INTF_IF_TYPE_0) &&
2680 mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) {
2681 lpfc_printf_vlog(vport, KERN_ERR,
2682 LOG_MBOX,
2683 "2891 Init VFI mailbox failed 0x%x\n",
2684 mboxq->u.mb.mbxStatus);
2685 mempool_free(mboxq, phba->mbox_mem_pool);
2686 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
2687 return;
2688 }
2689
2690 lpfc_initial_flogi(vport);
2691 mempool_free(mboxq, phba->mbox_mem_pool);
2692 return;
2693}
2694
2695/**
2696 * lpfc_issue_init_vfi - Issue init_vfi mailbox command.
2697 * @vport: pointer to lpfc_vport data structure.
2698 *
2699 * This function issue a init_vfi mailbox command to initialize the VFI and
2700 * VPI for the physical port.
2701 */
2702void
2703lpfc_issue_init_vfi(struct lpfc_vport *vport)
2704{
2705 LPFC_MBOXQ_t *mboxq;
2706 int rc;
2707 struct lpfc_hba *phba = vport->phba;
2708
2709 mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
2710 if (!mboxq) {
2711 lpfc_printf_vlog(vport, KERN_ERR,
2712 LOG_MBOX, "2892 Failed to allocate "
2713 "init_vfi mailbox\n");
2714 return;
2715 }
2716 lpfc_init_vfi(mboxq, vport);
2717 mboxq->mbox_cmpl = lpfc_init_vfi_cmpl;
2718 rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
2719 if (rc == MBX_NOT_FINISHED) {
2720 lpfc_printf_vlog(vport, KERN_ERR,
2721 LOG_MBOX, "2893 Failed to issue init_vfi mailbox\n");
2722 mempool_free(mboxq, vport->phba->mbox_mem_pool);
2723 }
2724}
2725
2726/**
2727 * lpfc_init_vpi_cmpl - Completion handler for init_vpi mbox command.
2728 * @phba: pointer to lpfc hba data structure.
2729 * @mboxq: pointer to mailbox data structure.
2730 *
2731 * This function handles completion of init vpi mailbox command.
2732 */
2733void
2734lpfc_init_vpi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
2735{
2736 struct lpfc_vport *vport = mboxq->vport;
2737 struct lpfc_nodelist *ndlp;
2738 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
2739
2740 if (mboxq->u.mb.mbxStatus) {
2741 lpfc_printf_vlog(vport, KERN_ERR,
2742 LOG_MBOX,
2743 "2609 Init VPI mailbox failed 0x%x\n",
2744 mboxq->u.mb.mbxStatus);
2745 mempool_free(mboxq, phba->mbox_mem_pool);
2746 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
2747 return;
2748 }
2749 spin_lock_irq(shost->host_lock);
2750 vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI;
2751 spin_unlock_irq(shost->host_lock);
2752
2753 /* If this port is physical port or FDISC is done, do reg_vpi */
2754 if ((phba->pport == vport) || (vport->port_state == LPFC_FDISC)) {
2755 ndlp = lpfc_findnode_did(vport, Fabric_DID);
2756 if (!ndlp)
2757 lpfc_printf_vlog(vport, KERN_ERR,
2758 LOG_DISCOVERY,
2759 "2731 Cannot find fabric "
2760 "controller node\n");
2761 else
2762 lpfc_register_new_vport(phba, vport, ndlp);
2763 mempool_free(mboxq, phba->mbox_mem_pool);
2764 return;
2765 }
2766
2767 if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
2768 lpfc_initial_fdisc(vport);
2769 else {
2770 lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
2771 lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
2772 "2606 No NPIV Fabric support\n");
2773 }
2774 mempool_free(mboxq, phba->mbox_mem_pool);
2775 return;
2776}
2777
2778/**
2779 * lpfc_issue_init_vpi - Issue init_vpi mailbox command.
2780 * @vport: pointer to lpfc_vport data structure.
2781 *
2782 * This function issue a init_vpi mailbox command to initialize
2783 * VPI for the vport.
2784 */
2785void
2786lpfc_issue_init_vpi(struct lpfc_vport *vport)
2787{
2788 LPFC_MBOXQ_t *mboxq;
2789 int rc;
2790
2791 mboxq = mempool_alloc(vport->phba->mbox_mem_pool, GFP_KERNEL);
2792 if (!mboxq) {
2793 lpfc_printf_vlog(vport, KERN_ERR,
2794 LOG_MBOX, "2607 Failed to allocate "
2795 "init_vpi mailbox\n");
2796 return;
2797 }
2798 lpfc_init_vpi(vport->phba, mboxq, vport->vpi);
2799 mboxq->vport = vport;
2800 mboxq->mbox_cmpl = lpfc_init_vpi_cmpl;
2801 rc = lpfc_sli_issue_mbox(vport->phba, mboxq, MBX_NOWAIT);
2802 if (rc == MBX_NOT_FINISHED) {
2803 lpfc_printf_vlog(vport, KERN_ERR,
2804 LOG_MBOX, "2608 Failed to issue init_vpi mailbox\n");
2805 mempool_free(mboxq, vport->phba->mbox_mem_pool);
2806 }
2807}
2808
2809/**
2810 * lpfc_start_fdiscs - send fdiscs for each vports on this port.
2811 * @phba: pointer to lpfc hba data structure.
2812 *
2813 * This function loops through the list of vports on the @phba and issues an
2814 * FDISC if possible.
2815 */
2816void
2817lpfc_start_fdiscs(struct lpfc_hba *phba)
2818{
2819 struct lpfc_vport **vports;
2820 int i;
2821
2822 vports = lpfc_create_vport_work_array(phba);
2823 if (vports != NULL) {
2824 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
2825 if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
2826 continue;
2827 /* There are no vpi for this vport */
2828 if (vports[i]->vpi > phba->max_vpi) {
2829 lpfc_vport_set_state(vports[i],
2830 FC_VPORT_FAILED);
2831 continue;
2832 }
2833 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
2834 lpfc_vport_set_state(vports[i],
2835 FC_VPORT_LINKDOWN);
2836 continue;
2837 }
2838 if (vports[i]->fc_flag & FC_VPORT_NEEDS_INIT_VPI) {
2839 lpfc_issue_init_vpi(vports[i]);
2840 continue;
2841 }
2842 if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
2843 lpfc_initial_fdisc(vports[i]);
2844 else {
2845 lpfc_vport_set_state(vports[i],
2846 FC_VPORT_NO_FABRIC_SUPP);
2847 lpfc_printf_vlog(vports[i], KERN_ERR,
2848 LOG_ELS,
2849 "0259 No NPIV "
2850 "Fabric support\n");
2851 }
2852 }
2853 }
2854 lpfc_destroy_vport_work_array(phba, vports);
2855}
2856
2857void
2858lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
2859{
2860 struct lpfc_dmabuf *dmabuf = mboxq->context1;
2861 struct lpfc_vport *vport = mboxq->vport;
2862 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
2863
2864 /*
2865 * VFI not supported for interface type 0, so ignore any mailbox
2866 * error (except VFI in use) and continue with the discovery.
2867 */
2868 if (mboxq->u.mb.mbxStatus &&
2869 (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
2870 LPFC_SLI_INTF_IF_TYPE_0) &&
2871 mboxq->u.mb.mbxStatus != MBX_VFI_IN_USE) {
2872 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
2873 "2018 REG_VFI mbxStatus error x%x "
2874 "HBA state x%x\n",
2875 mboxq->u.mb.mbxStatus, vport->port_state);
2876 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
2877 /* FLOGI failed, use loop map to make discovery list */
2878 lpfc_disc_list_loopmap(vport);
2879 /* Start discovery */
2880 lpfc_disc_start(vport);
2881 goto out_free_mem;
2882 }
2883 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
2884 goto out_free_mem;
2885 }
2886 /* The VPI is implicitly registered when the VFI is registered */
2887 spin_lock_irq(shost->host_lock);
2888 vport->vpi_state |= LPFC_VPI_REGISTERED;
2889 vport->fc_flag |= FC_VFI_REGISTERED;
2890 vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
2891 vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI;
2892 spin_unlock_irq(shost->host_lock);
2893
2894 /* In case SLI4 FC loopback test, we are ready */
2895 if ((phba->sli_rev == LPFC_SLI_REV4) &&
2896 (phba->link_flag & LS_LOOPBACK_MODE)) {
2897 phba->link_state = LPFC_HBA_READY;
2898 goto out_free_mem;
2899 }
2900
2901 if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
2902 /*
2903 * For private loop or for NPort pt2pt,
2904 * just start discovery and we are done.
2905 */
2906 if ((vport->fc_flag & FC_PT2PT) ||
2907 ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
2908 !(vport->fc_flag & FC_PUBLIC_LOOP))) {
2909
2910 /* Use loop map to make discovery list */
2911 lpfc_disc_list_loopmap(vport);
2912 /* Start discovery */
2913 lpfc_disc_start(vport);
2914 } else {
2915 lpfc_start_fdiscs(phba);
2916 lpfc_do_scr_ns_plogi(phba, vport);
2917 }
2918 }
2919
2920out_free_mem:
2921 mempool_free(mboxq, phba->mbox_mem_pool);
2922 lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
2923 kfree(dmabuf);
2924 return;
2925}
2926
2927static void
2928lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
2929{
2930 MAILBOX_t *mb = &pmb->u.mb;
2931 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) pmb->context1;
2932 struct lpfc_vport *vport = pmb->vport;
2933
2934
2935 /* Check for error */
2936 if (mb->mbxStatus) {
2937 /* READ_SPARAM mbox error <mbxStatus> state <hba_state> */
2938 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
2939 "0319 READ_SPARAM mbxStatus error x%x "
2940 "hba state x%x>\n",
2941 mb->mbxStatus, vport->port_state);
2942 lpfc_linkdown(phba);
2943 goto out;
2944 }
2945
2946 memcpy((uint8_t *) &vport->fc_sparam, (uint8_t *) mp->virt,
2947 sizeof (struct serv_parm));
2948 lpfc_update_vport_wwn(vport);
2949 if (vport->port_type == LPFC_PHYSICAL_PORT) {
2950 memcpy(&phba->wwnn, &vport->fc_nodename, sizeof(phba->wwnn));
2951 memcpy(&phba->wwpn, &vport->fc_portname, sizeof(phba->wwnn));
2952 }
2953
2954 lpfc_mbuf_free(phba, mp->virt, mp->phys);
2955 kfree(mp);
2956 mempool_free(pmb, phba->mbox_mem_pool);
2957 return;
2958
2959out:
2960 pmb->context1 = NULL;
2961 lpfc_mbuf_free(phba, mp->virt, mp->phys);
2962 kfree(mp);
2963 lpfc_issue_clear_la(phba, vport);
2964 mempool_free(pmb, phba->mbox_mem_pool);
2965 return;
2966}
2967
2968static void
2969lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
2970{
2971 struct lpfc_vport *vport = phba->pport;
2972 LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
2973 struct Scsi_Host *shost;
2974 int i;
2975 struct lpfc_dmabuf *mp;
2976 int rc;
2977 struct fcf_record *fcf_record;
2978
2979 spin_lock_irq(&phba->hbalock);
2980 switch (bf_get(lpfc_mbx_read_top_link_spd, la)) {
2981 case LPFC_LINK_SPEED_1GHZ:
2982 case LPFC_LINK_SPEED_2GHZ:
2983 case LPFC_LINK_SPEED_4GHZ:
2984 case LPFC_LINK_SPEED_8GHZ:
2985 case LPFC_LINK_SPEED_10GHZ:
2986 case LPFC_LINK_SPEED_16GHZ:
2987 phba->fc_linkspeed = bf_get(lpfc_mbx_read_top_link_spd, la);
2988 break;
2989 default:
2990 phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN;
2991 break;
2992 }
2993
2994 phba->fc_topology = bf_get(lpfc_mbx_read_top_topology, la);
2995 phba->link_flag &= ~LS_NPIV_FAB_SUPPORTED;
2996
2997 shost = lpfc_shost_from_vport(vport);
2998 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
2999 phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
3000
3001 /* if npiv is enabled and this adapter supports npiv log
3002 * a message that npiv is not supported in this topology
3003 */
3004 if (phba->cfg_enable_npiv && phba->max_vpi)
3005 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3006 "1309 Link Up Event npiv not supported in loop "
3007 "topology\n");
3008 /* Get Loop Map information */
3009 if (bf_get(lpfc_mbx_read_top_il, la)) {
3010 spin_lock(shost->host_lock);
3011 vport->fc_flag |= FC_LBIT;
3012 spin_unlock(shost->host_lock);
3013 }
3014
3015 vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la);
3016 i = la->lilpBde64.tus.f.bdeSize;
3017
3018 if (i == 0) {
3019 phba->alpa_map[0] = 0;
3020 } else {
3021 if (vport->cfg_log_verbose & LOG_LINK_EVENT) {
3022 int numalpa, j, k;
3023 union {
3024 uint8_t pamap[16];
3025 struct {
3026 uint32_t wd1;
3027 uint32_t wd2;
3028 uint32_t wd3;
3029 uint32_t wd4;
3030 } pa;
3031 } un;
3032 numalpa = phba->alpa_map[0];
3033 j = 0;
3034 while (j < numalpa) {
3035 memset(un.pamap, 0, 16);
3036 for (k = 1; j < numalpa; k++) {
3037 un.pamap[k - 1] =
3038 phba->alpa_map[j + 1];
3039 j++;
3040 if (k == 16)
3041 break;
3042 }
3043 /* Link Up Event ALPA map */
3044 lpfc_printf_log(phba,
3045 KERN_WARNING,
3046 LOG_LINK_EVENT,
3047 "1304 Link Up Event "
3048 "ALPA map Data: x%x "
3049 "x%x x%x x%x\n",
3050 un.pa.wd1, un.pa.wd2,
3051 un.pa.wd3, un.pa.wd4);
3052 }
3053 }
3054 }
3055 } else {
3056 if (!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) {
3057 if (phba->max_vpi && phba->cfg_enable_npiv &&
3058 (phba->sli_rev >= LPFC_SLI_REV3))
3059 phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
3060 }
3061 vport->fc_myDID = phba->fc_pref_DID;
3062 spin_lock(shost->host_lock);
3063 vport->fc_flag |= FC_LBIT;
3064 spin_unlock(shost->host_lock);
3065 }
3066 spin_unlock_irq(&phba->hbalock);
3067
3068 lpfc_linkup(phba);
3069 sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
3070 if (!sparam_mbox)
3071 goto out;
3072
3073 rc = lpfc_read_sparam(phba, sparam_mbox, 0);
3074 if (rc) {
3075 mempool_free(sparam_mbox, phba->mbox_mem_pool);
3076 goto out;
3077 }
3078 sparam_mbox->vport = vport;
3079 sparam_mbox->mbox_cmpl = lpfc_mbx_cmpl_read_sparam;
3080 rc = lpfc_sli_issue_mbox(phba, sparam_mbox, MBX_NOWAIT);
3081 if (rc == MBX_NOT_FINISHED) {
3082 mp = (struct lpfc_dmabuf *) sparam_mbox->context1;
3083 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3084 kfree(mp);
3085 mempool_free(sparam_mbox, phba->mbox_mem_pool);
3086 goto out;
3087 }
3088
3089 if (!(phba->hba_flag & HBA_FCOE_MODE)) {
3090 cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
3091 if (!cfglink_mbox)
3092 goto out;
3093 vport->port_state = LPFC_LOCAL_CFG_LINK;
3094 lpfc_config_link(phba, cfglink_mbox);
3095 cfglink_mbox->vport = vport;
3096 cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link;
3097 rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT);
3098 if (rc == MBX_NOT_FINISHED) {
3099 mempool_free(cfglink_mbox, phba->mbox_mem_pool);
3100 goto out;
3101 }
3102 } else {
3103 vport->port_state = LPFC_VPORT_UNKNOWN;
3104 /*
3105 * Add the driver's default FCF record at FCF index 0 now. This
3106 * is phase 1 implementation that support FCF index 0 and driver
3107 * defaults.
3108 */
3109 if (!(phba->hba_flag & HBA_FIP_SUPPORT)) {
3110 fcf_record = kzalloc(sizeof(struct fcf_record),
3111 GFP_KERNEL);
3112 if (unlikely(!fcf_record)) {
3113 lpfc_printf_log(phba, KERN_ERR,
3114 LOG_MBOX | LOG_SLI,
3115 "2554 Could not allocate memory for "
3116 "fcf record\n");
3117 rc = -ENODEV;
3118 goto out;
3119 }
3120
3121 lpfc_sli4_build_dflt_fcf_record(phba, fcf_record,
3122 LPFC_FCOE_FCF_DEF_INDEX);
3123 rc = lpfc_sli4_add_fcf_record(phba, fcf_record);
3124 if (unlikely(rc)) {
3125 lpfc_printf_log(phba, KERN_ERR,
3126 LOG_MBOX | LOG_SLI,
3127 "2013 Could not manually add FCF "
3128 "record 0, status %d\n", rc);
3129 rc = -ENODEV;
3130 kfree(fcf_record);
3131 goto out;
3132 }
3133 kfree(fcf_record);
3134 }
3135 /*
3136 * The driver is expected to do FIP/FCF. Call the port
3137 * and get the FCF Table.
3138 */
3139 spin_lock_irq(&phba->hbalock);
3140 if (phba->hba_flag & FCF_TS_INPROG) {
3141 spin_unlock_irq(&phba->hbalock);
3142 return;
3143 }
3144 /* This is the initial FCF discovery scan */
3145 phba->fcf.fcf_flag |= FCF_INIT_DISC;
3146 spin_unlock_irq(&phba->hbalock);
3147 lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
3148 "2778 Start FCF table scan at linkup\n");
3149 rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba,
3150 LPFC_FCOE_FCF_GET_FIRST);
3151 if (rc) {
3152 spin_lock_irq(&phba->hbalock);
3153 phba->fcf.fcf_flag &= ~FCF_INIT_DISC;
3154 spin_unlock_irq(&phba->hbalock);
3155 goto out;
3156 }
3157 /* Reset FCF roundrobin bmask for new discovery */
3158 lpfc_sli4_clear_fcf_rr_bmask(phba);
3159 }
3160
3161 return;
3162out:
3163 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
3164 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
3165 "0263 Discovery Mailbox error: state: 0x%x : %p %p\n",
3166 vport->port_state, sparam_mbox, cfglink_mbox);
3167 lpfc_issue_clear_la(phba, vport);
3168 return;
3169}
3170
3171static void
3172lpfc_enable_la(struct lpfc_hba *phba)
3173{
3174 uint32_t control;
3175 struct lpfc_sli *psli = &phba->sli;
3176 spin_lock_irq(&phba->hbalock);
3177 psli->sli_flag |= LPFC_PROCESS_LA;
3178 if (phba->sli_rev <= LPFC_SLI_REV3) {
3179 control = readl(phba->HCregaddr);
3180 control |= HC_LAINT_ENA;
3181 writel(control, phba->HCregaddr);
3182 readl(phba->HCregaddr); /* flush */
3183 }
3184 spin_unlock_irq(&phba->hbalock);
3185}
3186
3187static void
3188lpfc_mbx_issue_link_down(struct lpfc_hba *phba)
3189{
3190 lpfc_linkdown(phba);
3191 lpfc_enable_la(phba);
3192 lpfc_unregister_unused_fcf(phba);
3193 /* turn on Link Attention interrupts - no CLEAR_LA needed */
3194}
3195
3196
3197/*
3198 * This routine handles processing a READ_TOPOLOGY mailbox
3199 * command upon completion. It is setup in the LPFC_MBOXQ
3200 * as the completion routine when the command is
3201 * handed off to the SLI layer.
3202 */
3203void
3204lpfc_mbx_cmpl_read_topology(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
3205{
3206 struct lpfc_vport *vport = pmb->vport;
3207 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3208 struct lpfc_mbx_read_top *la;
3209 MAILBOX_t *mb = &pmb->u.mb;
3210 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
3211
3212 /* Unblock ELS traffic */
3213 phba->sli.ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT;
3214 /* Check for error */
3215 if (mb->mbxStatus) {
3216 lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
3217 "1307 READ_LA mbox error x%x state x%x\n",
3218 mb->mbxStatus, vport->port_state);
3219 lpfc_mbx_issue_link_down(phba);
3220 phba->link_state = LPFC_HBA_ERROR;
3221 goto lpfc_mbx_cmpl_read_topology_free_mbuf;
3222 }
3223
3224 la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop;
3225
3226 memcpy(&phba->alpa_map[0], mp->virt, 128);
3227
3228 spin_lock_irq(shost->host_lock);
3229 if (bf_get(lpfc_mbx_read_top_pb, la))
3230 vport->fc_flag |= FC_BYPASSED_MODE;
3231 else
3232 vport->fc_flag &= ~FC_BYPASSED_MODE;
3233 spin_unlock_irq(shost->host_lock);
3234
3235 if ((phba->fc_eventTag < la->eventTag) ||
3236 (phba->fc_eventTag == la->eventTag)) {
3237 phba->fc_stat.LinkMultiEvent++;
3238 if (bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP)
3239 if (phba->fc_eventTag != 0)
3240 lpfc_linkdown(phba);
3241 }
3242
3243 phba->fc_eventTag = la->eventTag;
3244 spin_lock_irq(&phba->hbalock);
3245 if (bf_get(lpfc_mbx_read_top_mm, la))
3246 phba->sli.sli_flag |= LPFC_MENLO_MAINT;
3247 else
3248 phba->sli.sli_flag &= ~LPFC_MENLO_MAINT;
3249 spin_unlock_irq(&phba->hbalock);
3250
3251 phba->link_events++;
3252 if ((bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP) &&
3253 (!bf_get(lpfc_mbx_read_top_mm, la))) {
3254 phba->fc_stat.LinkUp++;
3255 if (phba->link_flag & LS_LOOPBACK_MODE) {
3256 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3257 "1306 Link Up Event in loop back mode "
3258 "x%x received Data: x%x x%x x%x x%x\n",
3259 la->eventTag, phba->fc_eventTag,
3260 bf_get(lpfc_mbx_read_top_alpa_granted,
3261 la),
3262 bf_get(lpfc_mbx_read_top_link_spd, la),
3263 phba->alpa_map[0]);
3264 } else {
3265 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3266 "1303 Link Up Event x%x received "
3267 "Data: x%x x%x x%x x%x x%x x%x %d\n",
3268 la->eventTag, phba->fc_eventTag,
3269 bf_get(lpfc_mbx_read_top_alpa_granted,
3270 la),
3271 bf_get(lpfc_mbx_read_top_link_spd, la),
3272 phba->alpa_map[0],
3273 bf_get(lpfc_mbx_read_top_mm, la),
3274 bf_get(lpfc_mbx_read_top_fa, la),
3275 phba->wait_4_mlo_maint_flg);
3276 }
3277 lpfc_mbx_process_link_up(phba, la);
3278 } else if (bf_get(lpfc_mbx_read_top_att_type, la) ==
3279 LPFC_ATT_LINK_DOWN) {
3280 phba->fc_stat.LinkDown++;
3281 if (phba->link_flag & LS_LOOPBACK_MODE)
3282 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3283 "1308 Link Down Event in loop back mode "
3284 "x%x received "
3285 "Data: x%x x%x x%x\n",
3286 la->eventTag, phba->fc_eventTag,
3287 phba->pport->port_state, vport->fc_flag);
3288 else
3289 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3290 "1305 Link Down Event x%x received "
3291 "Data: x%x x%x x%x x%x x%x\n",
3292 la->eventTag, phba->fc_eventTag,
3293 phba->pport->port_state, vport->fc_flag,
3294 bf_get(lpfc_mbx_read_top_mm, la),
3295 bf_get(lpfc_mbx_read_top_fa, la));
3296 lpfc_mbx_issue_link_down(phba);
3297 }
3298 if ((bf_get(lpfc_mbx_read_top_mm, la)) &&
3299 (bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP)) {
3300 if (phba->link_state != LPFC_LINK_DOWN) {
3301 phba->fc_stat.LinkDown++;
3302 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3303 "1312 Link Down Event x%x received "
3304 "Data: x%x x%x x%x\n",
3305 la->eventTag, phba->fc_eventTag,
3306 phba->pport->port_state, vport->fc_flag);
3307 lpfc_mbx_issue_link_down(phba);
3308 } else
3309 lpfc_enable_la(phba);
3310
3311 lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
3312 "1310 Menlo Maint Mode Link up Event x%x rcvd "
3313 "Data: x%x x%x x%x\n",
3314 la->eventTag, phba->fc_eventTag,
3315 phba->pport->port_state, vport->fc_flag);
3316 /*
3317 * The cmnd that triggered this will be waiting for this
3318 * signal.
3319 */
3320 /* WAKEUP for MENLO_SET_MODE or MENLO_RESET command. */
3321 if (phba->wait_4_mlo_maint_flg) {
3322 phba->wait_4_mlo_maint_flg = 0;
3323 wake_up_interruptible(&phba->wait_4_mlo_m_q);
3324 }
3325 }
3326
3327 if (bf_get(lpfc_mbx_read_top_fa, la)) {
3328 if (bf_get(lpfc_mbx_read_top_mm, la))
3329 lpfc_issue_clear_la(phba, vport);
3330 lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
3331 "1311 fa %d\n",
3332 bf_get(lpfc_mbx_read_top_fa, la));
3333 }
3334
3335lpfc_mbx_cmpl_read_topology_free_mbuf:
3336 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3337 kfree(mp);
3338 mempool_free(pmb, phba->mbox_mem_pool);
3339 return;
3340}
3341
3342/*
3343 * This routine handles processing a REG_LOGIN mailbox
3344 * command upon completion. It is setup in the LPFC_MBOXQ
3345 * as the completion routine when the command is
3346 * handed off to the SLI layer.
3347 */
3348void
3349lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
3350{
3351 struct lpfc_vport *vport = pmb->vport;
3352 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
3353 struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
3354 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3355
3356 pmb->context1 = NULL;
3357 pmb->context2 = NULL;
3358
3359 if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND)
3360 ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND;
3361
3362 if (ndlp->nlp_flag & NLP_IGNR_REG_CMPL ||
3363 ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) {
3364 /* We rcvd a rscn after issuing this
3365 * mbox reg login, we may have cycled
3366 * back through the state and be
3367 * back at reg login state so this
3368 * mbox needs to be ignored becase
3369 * there is another reg login in
3370 * process.
3371 */
3372 spin_lock_irq(shost->host_lock);
3373 ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
3374 spin_unlock_irq(shost->host_lock);
3375 } else
3376 /* Good status, call state machine */
3377 lpfc_disc_state_machine(vport, ndlp, pmb,
3378 NLP_EVT_CMPL_REG_LOGIN);
3379
3380 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3381 kfree(mp);
3382 mempool_free(pmb, phba->mbox_mem_pool);
3383 /* decrement the node reference count held for this callback
3384 * function.
3385 */
3386 lpfc_nlp_put(ndlp);
3387
3388 return;
3389}
3390
3391static void
3392lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
3393{
3394 MAILBOX_t *mb = &pmb->u.mb;
3395 struct lpfc_vport *vport = pmb->vport;
3396 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3397
3398 switch (mb->mbxStatus) {
3399 case 0x0011:
3400 case 0x0020:
3401 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
3402 "0911 cmpl_unreg_vpi, mb status = 0x%x\n",
3403 mb->mbxStatus);
3404 break;
3405 /* If VPI is busy, reset the HBA */
3406 case 0x9700:
3407 lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE,
3408 "2798 Unreg_vpi failed vpi 0x%x, mb status = 0x%x\n",
3409 vport->vpi, mb->mbxStatus);
3410 if (!(phba->pport->load_flag & FC_UNLOADING))
3411 lpfc_workq_post_event(phba, NULL, NULL,
3412 LPFC_EVT_RESET_HBA);
3413 }
3414 spin_lock_irq(shost->host_lock);
3415 vport->vpi_state &= ~LPFC_VPI_REGISTERED;
3416 vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
3417 spin_unlock_irq(shost->host_lock);
3418 vport->unreg_vpi_cmpl = VPORT_OK;
3419 mempool_free(pmb, phba->mbox_mem_pool);
3420 lpfc_cleanup_vports_rrqs(vport, NULL);
3421 /*
3422 * This shost reference might have been taken at the beginning of
3423 * lpfc_vport_delete()
3424 */
3425 if ((vport->load_flag & FC_UNLOADING) && (vport != phba->pport))
3426 scsi_host_put(shost);
3427}
3428
3429int
3430lpfc_mbx_unreg_vpi(struct lpfc_vport *vport)
3431{
3432 struct lpfc_hba *phba = vport->phba;
3433 LPFC_MBOXQ_t *mbox;
3434 int rc;
3435
3436 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
3437 if (!mbox)
3438 return 1;
3439
3440 lpfc_unreg_vpi(phba, vport->vpi, mbox);
3441 mbox->vport = vport;
3442 mbox->mbox_cmpl = lpfc_mbx_cmpl_unreg_vpi;
3443 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
3444 if (rc == MBX_NOT_FINISHED) {
3445 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
3446 "1800 Could not issue unreg_vpi\n");
3447 mempool_free(mbox, phba->mbox_mem_pool);
3448 vport->unreg_vpi_cmpl = VPORT_ERROR;
3449 return rc;
3450 }
3451 return 0;
3452}
3453
3454static void
3455lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
3456{
3457 struct lpfc_vport *vport = pmb->vport;
3458 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3459 MAILBOX_t *mb = &pmb->u.mb;
3460
3461 switch (mb->mbxStatus) {
3462 case 0x0011:
3463 case 0x9601:
3464 case 0x9602:
3465 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
3466 "0912 cmpl_reg_vpi, mb status = 0x%x\n",
3467 mb->mbxStatus);
3468 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
3469 spin_lock_irq(shost->host_lock);
3470 vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
3471 spin_unlock_irq(shost->host_lock);
3472 vport->fc_myDID = 0;
3473 goto out;
3474 }
3475
3476 spin_lock_irq(shost->host_lock);
3477 vport->vpi_state |= LPFC_VPI_REGISTERED;
3478 vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
3479 spin_unlock_irq(shost->host_lock);
3480 vport->num_disc_nodes = 0;
3481 /* go thru NPR list and issue ELS PLOGIs */
3482 if (vport->fc_npr_cnt)
3483 lpfc_els_disc_plogi(vport);
3484
3485 if (!vport->num_disc_nodes) {
3486 spin_lock_irq(shost->host_lock);
3487 vport->fc_flag &= ~FC_NDISC_ACTIVE;
3488 spin_unlock_irq(shost->host_lock);
3489 lpfc_can_disctmo(vport);
3490 }
3491 vport->port_state = LPFC_VPORT_READY;
3492
3493out:
3494 mempool_free(pmb, phba->mbox_mem_pool);
3495 return;
3496}
3497
3498/**
3499 * lpfc_create_static_vport - Read HBA config region to create static vports.
3500 * @phba: pointer to lpfc hba data structure.
3501 *
3502 * This routine issue a DUMP mailbox command for config region 22 to get
3503 * the list of static vports to be created. The function create vports
3504 * based on the information returned from the HBA.
3505 **/
3506void
3507lpfc_create_static_vport(struct lpfc_hba *phba)
3508{
3509 LPFC_MBOXQ_t *pmb = NULL;
3510 MAILBOX_t *mb;
3511 struct static_vport_info *vport_info;
3512 int rc = 0, i;
3513 struct fc_vport_identifiers vport_id;
3514 struct fc_vport *new_fc_vport;
3515 struct Scsi_Host *shost;
3516 struct lpfc_vport *vport;
3517 uint16_t offset = 0;
3518 uint8_t *vport_buff;
3519 struct lpfc_dmabuf *mp;
3520 uint32_t byte_count = 0;
3521
3522 pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
3523 if (!pmb) {
3524 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3525 "0542 lpfc_create_static_vport failed to"
3526 " allocate mailbox memory\n");
3527 return;
3528 }
3529
3530 mb = &pmb->u.mb;
3531
3532 vport_info = kzalloc(sizeof(struct static_vport_info), GFP_KERNEL);
3533 if (!vport_info) {
3534 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3535 "0543 lpfc_create_static_vport failed to"
3536 " allocate vport_info\n");
3537 mempool_free(pmb, phba->mbox_mem_pool);
3538 return;
3539 }
3540
3541 vport_buff = (uint8_t *) vport_info;
3542 do {
3543 if (lpfc_dump_static_vport(phba, pmb, offset))
3544 goto out;
3545
3546 pmb->vport = phba->pport;
3547 rc = lpfc_sli_issue_mbox_wait(phba, pmb, LPFC_MBOX_TMO);
3548
3549 if ((rc != MBX_SUCCESS) || mb->mbxStatus) {
3550 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
3551 "0544 lpfc_create_static_vport failed to"
3552 " issue dump mailbox command ret 0x%x "
3553 "status 0x%x\n",
3554 rc, mb->mbxStatus);
3555 goto out;
3556 }
3557
3558 if (phba->sli_rev == LPFC_SLI_REV4) {
3559 byte_count = pmb->u.mqe.un.mb_words[5];
3560 mp = (struct lpfc_dmabuf *) pmb->context2;
3561 if (byte_count > sizeof(struct static_vport_info) -
3562 offset)
3563 byte_count = sizeof(struct static_vport_info)
3564 - offset;
3565 memcpy(vport_buff + offset, mp->virt, byte_count);
3566 offset += byte_count;
3567 } else {
3568 if (mb->un.varDmp.word_cnt >
3569 sizeof(struct static_vport_info) - offset)
3570 mb->un.varDmp.word_cnt =
3571 sizeof(struct static_vport_info)
3572 - offset;
3573 byte_count = mb->un.varDmp.word_cnt;
3574 lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
3575 vport_buff + offset,
3576 byte_count);
3577
3578 offset += byte_count;
3579 }
3580
3581 } while (byte_count &&
3582 offset < sizeof(struct static_vport_info));
3583
3584
3585 if ((le32_to_cpu(vport_info->signature) != VPORT_INFO_SIG) ||
3586 ((le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK)
3587 != VPORT_INFO_REV)) {
3588 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
3589 "0545 lpfc_create_static_vport bad"
3590 " information header 0x%x 0x%x\n",
3591 le32_to_cpu(vport_info->signature),
3592 le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK);
3593
3594 goto out;
3595 }
3596
3597 shost = lpfc_shost_from_vport(phba->pport);
3598
3599 for (i = 0; i < MAX_STATIC_VPORT_COUNT; i++) {
3600 memset(&vport_id, 0, sizeof(vport_id));
3601 vport_id.port_name = wwn_to_u64(vport_info->vport_list[i].wwpn);
3602 vport_id.node_name = wwn_to_u64(vport_info->vport_list[i].wwnn);
3603 if (!vport_id.port_name || !vport_id.node_name)
3604 continue;
3605
3606 vport_id.roles = FC_PORT_ROLE_FCP_INITIATOR;
3607 vport_id.vport_type = FC_PORTTYPE_NPIV;
3608 vport_id.disable = false;
3609 new_fc_vport = fc_vport_create(shost, 0, &vport_id);
3610
3611 if (!new_fc_vport) {
3612 lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
3613 "0546 lpfc_create_static_vport failed to"
3614 " create vport\n");
3615 continue;
3616 }
3617
3618 vport = *(struct lpfc_vport **)new_fc_vport->dd_data;
3619 vport->vport_flag |= STATIC_VPORT;
3620 }
3621
3622out:
3623 kfree(vport_info);
3624 if (rc != MBX_TIMEOUT) {
3625 if (pmb->context2) {
3626 mp = (struct lpfc_dmabuf *) pmb->context2;
3627 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3628 kfree(mp);
3629 }
3630 mempool_free(pmb, phba->mbox_mem_pool);
3631 }
3632
3633 return;
3634}
3635
3636/*
3637 * This routine handles processing a Fabric REG_LOGIN mailbox
3638 * command upon completion. It is setup in the LPFC_MBOXQ
3639 * as the completion routine when the command is
3640 * handed off to the SLI layer.
3641 */
3642void
3643lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
3644{
3645 struct lpfc_vport *vport = pmb->vport;
3646 MAILBOX_t *mb = &pmb->u.mb;
3647 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
3648 struct lpfc_nodelist *ndlp;
3649 struct Scsi_Host *shost;
3650
3651 ndlp = (struct lpfc_nodelist *) pmb->context2;
3652 pmb->context1 = NULL;
3653 pmb->context2 = NULL;
3654
3655 if (mb->mbxStatus) {
3656 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
3657 "0258 Register Fabric login error: 0x%x\n",
3658 mb->mbxStatus);
3659 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3660 kfree(mp);
3661 mempool_free(pmb, phba->mbox_mem_pool);
3662
3663 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
3664 /* FLOGI failed, use loop map to make discovery list */
3665 lpfc_disc_list_loopmap(vport);
3666
3667 /* Start discovery */
3668 lpfc_disc_start(vport);
3669 /* Decrement the reference count to ndlp after the
3670 * reference to the ndlp are done.
3671 */
3672 lpfc_nlp_put(ndlp);
3673 return;
3674 }
3675
3676 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
3677 /* Decrement the reference count to ndlp after the reference
3678 * to the ndlp are done.
3679 */
3680 lpfc_nlp_put(ndlp);
3681 return;
3682 }
3683
3684 if (phba->sli_rev < LPFC_SLI_REV4)
3685 ndlp->nlp_rpi = mb->un.varWords[0];
3686 ndlp->nlp_flag |= NLP_RPI_REGISTERED;
3687 ndlp->nlp_type |= NLP_FABRIC;
3688 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
3689
3690 if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
3691 /* when physical port receive logo donot start
3692 * vport discovery */
3693 if (!(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG))
3694 lpfc_start_fdiscs(phba);
3695 else {
3696 shost = lpfc_shost_from_vport(vport);
3697 spin_lock_irq(shost->host_lock);
3698 vport->fc_flag &= ~FC_LOGO_RCVD_DID_CHNG ;
3699 spin_unlock_irq(shost->host_lock);
3700 }
3701 lpfc_do_scr_ns_plogi(phba, vport);
3702 }
3703
3704 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3705 kfree(mp);
3706 mempool_free(pmb, phba->mbox_mem_pool);
3707
3708 /* Drop the reference count from the mbox at the end after
3709 * all the current reference to the ndlp have been done.
3710 */
3711 lpfc_nlp_put(ndlp);
3712 return;
3713}
3714
3715/*
3716 * This routine handles processing a NameServer REG_LOGIN mailbox
3717 * command upon completion. It is setup in the LPFC_MBOXQ
3718 * as the completion routine when the command is
3719 * handed off to the SLI layer.
3720 */
3721void
3722lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
3723{
3724 MAILBOX_t *mb = &pmb->u.mb;
3725 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
3726 struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
3727 struct lpfc_vport *vport = pmb->vport;
3728
3729 pmb->context1 = NULL;
3730 pmb->context2 = NULL;
3731
3732 if (mb->mbxStatus) {
3733out:
3734 lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
3735 "0260 Register NameServer error: 0x%x\n",
3736 mb->mbxStatus);
3737 /* decrement the node reference count held for this
3738 * callback function.
3739 */
3740 lpfc_nlp_put(ndlp);
3741 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3742 kfree(mp);
3743 mempool_free(pmb, phba->mbox_mem_pool);
3744
3745 /* If no other thread is using the ndlp, free it */
3746 lpfc_nlp_not_used(ndlp);
3747
3748 if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
3749 /*
3750 * RegLogin failed, use loop map to make discovery
3751 * list
3752 */
3753 lpfc_disc_list_loopmap(vport);
3754
3755 /* Start discovery */
3756 lpfc_disc_start(vport);
3757 return;
3758 }
3759 lpfc_vport_set_state(vport, FC_VPORT_FAILED);
3760 return;
3761 }
3762
3763 if (phba->sli_rev < LPFC_SLI_REV4)
3764 ndlp->nlp_rpi = mb->un.varWords[0];
3765 ndlp->nlp_flag |= NLP_RPI_REGISTERED;
3766 ndlp->nlp_type |= NLP_FABRIC;
3767 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
3768
3769 if (vport->port_state < LPFC_VPORT_READY) {
3770 /* Link up discovery requires Fabric registration. */
3771 lpfc_ns_cmd(vport, SLI_CTNS_RFF_ID, 0, 0); /* Do this first! */
3772 lpfc_ns_cmd(vport, SLI_CTNS_RNN_ID, 0, 0);
3773 lpfc_ns_cmd(vport, SLI_CTNS_RSNN_NN, 0, 0);
3774 lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0);
3775 lpfc_ns_cmd(vport, SLI_CTNS_RFT_ID, 0, 0);
3776
3777 /* Issue SCR just before NameServer GID_FT Query */
3778 lpfc_issue_els_scr(vport, SCR_DID, 0);
3779 }
3780
3781 vport->fc_ns_retry = 0;
3782 /* Good status, issue CT Request to NameServer */
3783 if (lpfc_ns_cmd(vport, SLI_CTNS_GID_FT, 0, 0)) {
3784 /* Cannot issue NameServer Query, so finish up discovery */
3785 goto out;
3786 }
3787
3788 /* decrement the node reference count held for this
3789 * callback function.
3790 */
3791 lpfc_nlp_put(ndlp);
3792 lpfc_mbuf_free(phba, mp->virt, mp->phys);
3793 kfree(mp);
3794 mempool_free(pmb, phba->mbox_mem_pool);
3795
3796 return;
3797}
3798
3799static void
3800lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
3801{
3802 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3803 struct fc_rport *rport;
3804 struct lpfc_rport_data *rdata;
3805 struct fc_rport_identifiers rport_ids;
3806 struct lpfc_hba *phba = vport->phba;
3807
3808 /* Remote port has reappeared. Re-register w/ FC transport */
3809 rport_ids.node_name = wwn_to_u64(ndlp->nlp_nodename.u.wwn);
3810 rport_ids.port_name = wwn_to_u64(ndlp->nlp_portname.u.wwn);
3811 rport_ids.port_id = ndlp->nlp_DID;
3812 rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
3813
3814 /*
3815 * We leave our node pointer in rport->dd_data when we unregister a
3816 * FCP target port. But fc_remote_port_add zeros the space to which
3817 * rport->dd_data points. So, if we're reusing a previously
3818 * registered port, drop the reference that we took the last time we
3819 * registered the port.
3820 */
3821 if (ndlp->rport && ndlp->rport->dd_data &&
3822 ((struct lpfc_rport_data *) ndlp->rport->dd_data)->pnode == ndlp)
3823 lpfc_nlp_put(ndlp);
3824
3825 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_RPORT,
3826 "rport add: did:x%x flg:x%x type x%x",
3827 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
3828
3829 /* Don't add the remote port if unloading. */
3830 if (vport->load_flag & FC_UNLOADING)
3831 return;
3832
3833 ndlp->rport = rport = fc_remote_port_add(shost, 0, &rport_ids);
3834 if (!rport || !get_device(&rport->dev)) {
3835 dev_printk(KERN_WARNING, &phba->pcidev->dev,
3836 "Warning: fc_remote_port_add failed\n");
3837 return;
3838 }
3839
3840 /* initialize static port data */
3841 rport->maxframe_size = ndlp->nlp_maxframe;
3842 rport->supported_classes = ndlp->nlp_class_sup;
3843 rdata = rport->dd_data;
3844 rdata->pnode = lpfc_nlp_get(ndlp);
3845
3846 if (ndlp->nlp_type & NLP_FCP_TARGET)
3847 rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
3848 if (ndlp->nlp_type & NLP_FCP_INITIATOR)
3849 rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
3850
3851 if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN)
3852 fc_remote_port_rolechg(rport, rport_ids.roles);
3853
3854 lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
3855 "3183 rport register x%06x, rport %p role x%x\n",
3856 ndlp->nlp_DID, rport, rport_ids.roles);
3857
3858 if ((rport->scsi_target_id != -1) &&
3859 (rport->scsi_target_id < LPFC_MAX_TARGET)) {
3860 ndlp->nlp_sid = rport->scsi_target_id;
3861 }
3862 return;
3863}
3864
3865static void
3866lpfc_unregister_remote_port(struct lpfc_nodelist *ndlp)
3867{
3868 struct fc_rport *rport = ndlp->rport;
3869
3870 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT,
3871 "rport delete: did:x%x flg:x%x type x%x",
3872 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
3873
3874 lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
3875 "3184 rport unregister x%06x, rport %p\n",
3876 ndlp->nlp_DID, rport);
3877
3878 fc_remote_port_delete(rport);
3879
3880 return;
3881}
3882
3883static void
3884lpfc_nlp_counters(struct lpfc_vport *vport, int state, int count)
3885{
3886 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3887
3888 spin_lock_irq(shost->host_lock);
3889 switch (state) {
3890 case NLP_STE_UNUSED_NODE:
3891 vport->fc_unused_cnt += count;
3892 break;
3893 case NLP_STE_PLOGI_ISSUE:
3894 vport->fc_plogi_cnt += count;
3895 break;
3896 case NLP_STE_ADISC_ISSUE:
3897 vport->fc_adisc_cnt += count;
3898 break;
3899 case NLP_STE_REG_LOGIN_ISSUE:
3900 vport->fc_reglogin_cnt += count;
3901 break;
3902 case NLP_STE_PRLI_ISSUE:
3903 vport->fc_prli_cnt += count;
3904 break;
3905 case NLP_STE_UNMAPPED_NODE:
3906 vport->fc_unmap_cnt += count;
3907 break;
3908 case NLP_STE_MAPPED_NODE:
3909 vport->fc_map_cnt += count;
3910 break;
3911 case NLP_STE_NPR_NODE:
3912 vport->fc_npr_cnt += count;
3913 break;
3914 }
3915 spin_unlock_irq(shost->host_lock);
3916}
3917
3918static void
3919lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
3920 int old_state, int new_state)
3921{
3922 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
3923
3924 if (new_state == NLP_STE_UNMAPPED_NODE) {
3925 ndlp->nlp_flag &= ~NLP_NODEV_REMOVE;
3926 ndlp->nlp_type |= NLP_FC_NODE;
3927 }
3928 if (new_state == NLP_STE_MAPPED_NODE)
3929 ndlp->nlp_flag &= ~NLP_NODEV_REMOVE;
3930 if (new_state == NLP_STE_NPR_NODE)
3931 ndlp->nlp_flag &= ~NLP_RCV_PLOGI;
3932
3933 /* Transport interface */
3934 if (ndlp->rport && (old_state == NLP_STE_MAPPED_NODE ||
3935 old_state == NLP_STE_UNMAPPED_NODE)) {
3936 vport->phba->nport_event_cnt++;
3937 lpfc_unregister_remote_port(ndlp);
3938 }
3939
3940 if (new_state == NLP_STE_MAPPED_NODE ||
3941 new_state == NLP_STE_UNMAPPED_NODE) {
3942 vport->phba->nport_event_cnt++;
3943 /*
3944 * Tell the fc transport about the port, if we haven't
3945 * already. If we have, and it's a scsi entity, be
3946 * sure to unblock any attached scsi devices
3947 */
3948 lpfc_register_remote_port(vport, ndlp);
3949 }
3950 if ((new_state == NLP_STE_MAPPED_NODE) &&
3951 (vport->stat_data_enabled)) {
3952 /*
3953 * A new target is discovered, if there is no buffer for
3954 * statistical data collection allocate buffer.
3955 */
3956 ndlp->lat_data = kcalloc(LPFC_MAX_BUCKET_COUNT,
3957 sizeof(struct lpfc_scsicmd_bkt),
3958 GFP_KERNEL);
3959
3960 if (!ndlp->lat_data)
3961 lpfc_printf_vlog(vport, KERN_ERR, LOG_NODE,
3962 "0286 lpfc_nlp_state_cleanup failed to "
3963 "allocate statistical data buffer DID "
3964 "0x%x\n", ndlp->nlp_DID);
3965 }
3966 /*
3967 * if we added to Mapped list, but the remote port
3968 * registration failed or assigned a target id outside
3969 * our presentable range - move the node to the
3970 * Unmapped List
3971 */
3972 if (new_state == NLP_STE_MAPPED_NODE &&
3973 (!ndlp->rport ||
3974 ndlp->rport->scsi_target_id == -1 ||
3975 ndlp->rport->scsi_target_id >= LPFC_MAX_TARGET)) {
3976 spin_lock_irq(shost->host_lock);
3977 ndlp->nlp_flag |= NLP_TGT_NO_SCSIID;
3978 spin_unlock_irq(shost->host_lock);
3979 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
3980 }
3981}
3982
3983static char *
3984lpfc_nlp_state_name(char *buffer, size_t size, int state)
3985{
3986 static char *states[] = {
3987 [NLP_STE_UNUSED_NODE] = "UNUSED",
3988 [NLP_STE_PLOGI_ISSUE] = "PLOGI",
3989 [NLP_STE_ADISC_ISSUE] = "ADISC",
3990 [NLP_STE_REG_LOGIN_ISSUE] = "REGLOGIN",
3991 [NLP_STE_PRLI_ISSUE] = "PRLI",
3992 [NLP_STE_LOGO_ISSUE] = "LOGO",
3993 [NLP_STE_UNMAPPED_NODE] = "UNMAPPED",
3994 [NLP_STE_MAPPED_NODE] = "MAPPED",
3995 [NLP_STE_NPR_NODE] = "NPR",
3996 };
3997
3998 if (state < NLP_STE_MAX_STATE && states[state])
3999 strlcpy(buffer, states[state], size);
4000 else
4001 snprintf(buffer, size, "unknown (%d)", state);
4002 return buffer;
4003}
4004
4005void
4006lpfc_nlp_set_state(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
4007 int state)
4008{
4009 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4010 int old_state = ndlp->nlp_state;
4011 char name1[16], name2[16];
4012
4013 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
4014 "0904 NPort state transition x%06x, %s -> %s\n",
4015 ndlp->nlp_DID,
4016 lpfc_nlp_state_name(name1, sizeof(name1), old_state),
4017 lpfc_nlp_state_name(name2, sizeof(name2), state));
4018
4019 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE,
4020 "node statechg did:x%x old:%d ste:%d",
4021 ndlp->nlp_DID, old_state, state);
4022
4023 if (old_state == NLP_STE_NPR_NODE &&
4024 state != NLP_STE_NPR_NODE)
4025 lpfc_cancel_retry_delay_tmo(vport, ndlp);
4026 if (old_state == NLP_STE_UNMAPPED_NODE) {
4027 ndlp->nlp_flag &= ~NLP_TGT_NO_SCSIID;
4028 ndlp->nlp_type &= ~NLP_FC_NODE;
4029 }
4030
4031 if (list_empty(&ndlp->nlp_listp)) {
4032 spin_lock_irq(shost->host_lock);
4033 list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes);
4034 spin_unlock_irq(shost->host_lock);
4035 } else if (old_state)
4036 lpfc_nlp_counters(vport, old_state, -1);
4037
4038 ndlp->nlp_state = state;
4039 lpfc_nlp_counters(vport, state, 1);
4040 lpfc_nlp_state_cleanup(vport, ndlp, old_state, state);
4041}
4042
4043void
4044lpfc_enqueue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4045{
4046 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4047
4048 if (list_empty(&ndlp->nlp_listp)) {
4049 spin_lock_irq(shost->host_lock);
4050 list_add_tail(&ndlp->nlp_listp, &vport->fc_nodes);
4051 spin_unlock_irq(shost->host_lock);
4052 }
4053}
4054
4055void
4056lpfc_dequeue_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4057{
4058 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4059
4060 lpfc_cancel_retry_delay_tmo(vport, ndlp);
4061 if (ndlp->nlp_state && !list_empty(&ndlp->nlp_listp))
4062 lpfc_nlp_counters(vport, ndlp->nlp_state, -1);
4063 spin_lock_irq(shost->host_lock);
4064 list_del_init(&ndlp->nlp_listp);
4065 spin_unlock_irq(shost->host_lock);
4066 lpfc_nlp_state_cleanup(vport, ndlp, ndlp->nlp_state,
4067 NLP_STE_UNUSED_NODE);
4068}
4069
4070static void
4071lpfc_disable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4072{
4073 lpfc_cancel_retry_delay_tmo(vport, ndlp);
4074 if (ndlp->nlp_state && !list_empty(&ndlp->nlp_listp))
4075 lpfc_nlp_counters(vport, ndlp->nlp_state, -1);
4076 lpfc_nlp_state_cleanup(vport, ndlp, ndlp->nlp_state,
4077 NLP_STE_UNUSED_NODE);
4078}
4079/**
4080 * lpfc_initialize_node - Initialize all fields of node object
4081 * @vport: Pointer to Virtual Port object.
4082 * @ndlp: Pointer to FC node object.
4083 * @did: FC_ID of the node.
4084 *
4085 * This function is always called when node object need to be initialized.
4086 * It initializes all the fields of the node object. Although the reference
4087 * to phba from @ndlp can be obtained indirectly through it's reference to
4088 * @vport, a direct reference to phba is taken here by @ndlp. This is due
4089 * to the life-span of the @ndlp might go beyond the existence of @vport as
4090 * the final release of ndlp is determined by its reference count. And, the
4091 * operation on @ndlp needs the reference to phba.
4092 **/
4093static inline void
4094lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
4095 uint32_t did)
4096{
4097 INIT_LIST_HEAD(&ndlp->els_retry_evt.evt_listp);
4098 INIT_LIST_HEAD(&ndlp->dev_loss_evt.evt_listp);
4099 init_timer(&ndlp->nlp_delayfunc);
4100 ndlp->nlp_delayfunc.function = lpfc_els_retry_delay;
4101 ndlp->nlp_delayfunc.data = (unsigned long)ndlp;
4102 ndlp->nlp_DID = did;
4103 ndlp->vport = vport;
4104 ndlp->phba = vport->phba;
4105 ndlp->nlp_sid = NLP_NO_SID;
4106 kref_init(&ndlp->kref);
4107 NLP_INT_NODE_ACT(ndlp);
4108 atomic_set(&ndlp->cmd_pending, 0);
4109 ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth;
4110 if (vport->phba->sli_rev == LPFC_SLI_REV4)
4111 ndlp->nlp_rpi = lpfc_sli4_alloc_rpi(vport->phba);
4112}
4113
4114struct lpfc_nodelist *
4115lpfc_enable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
4116 int state)
4117{
4118 struct lpfc_hba *phba = vport->phba;
4119 uint32_t did;
4120 unsigned long flags;
4121
4122 if (!ndlp)
4123 return NULL;
4124
4125 spin_lock_irqsave(&phba->ndlp_lock, flags);
4126 /* The ndlp should not be in memory free mode */
4127 if (NLP_CHK_FREE_REQ(ndlp)) {
4128 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
4129 lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
4130 "0277 lpfc_enable_node: ndlp:x%p "
4131 "usgmap:x%x refcnt:%d\n",
4132 (void *)ndlp, ndlp->nlp_usg_map,
4133 atomic_read(&ndlp->kref.refcount));
4134 return NULL;
4135 }
4136 /* The ndlp should not already be in active mode */
4137 if (NLP_CHK_NODE_ACT(ndlp)) {
4138 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
4139 lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
4140 "0278 lpfc_enable_node: ndlp:x%p "
4141 "usgmap:x%x refcnt:%d\n",
4142 (void *)ndlp, ndlp->nlp_usg_map,
4143 atomic_read(&ndlp->kref.refcount));
4144 return NULL;
4145 }
4146
4147 /* Keep the original DID */
4148 did = ndlp->nlp_DID;
4149
4150 /* re-initialize ndlp except of ndlp linked list pointer */
4151 memset((((char *)ndlp) + sizeof (struct list_head)), 0,
4152 sizeof (struct lpfc_nodelist) - sizeof (struct list_head));
4153 lpfc_initialize_node(vport, ndlp, did);
4154
4155 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
4156
4157 if (state != NLP_STE_UNUSED_NODE)
4158 lpfc_nlp_set_state(vport, ndlp, state);
4159
4160 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE,
4161 "node enable: did:x%x",
4162 ndlp->nlp_DID, 0, 0);
4163 return ndlp;
4164}
4165
4166void
4167lpfc_drop_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4168{
4169 /*
4170 * Use of lpfc_drop_node and UNUSED list: lpfc_drop_node should
4171 * be used if we wish to issue the "last" lpfc_nlp_put() to remove
4172 * the ndlp from the vport. The ndlp marked as UNUSED on the list
4173 * until ALL other outstanding threads have completed. We check
4174 * that the ndlp not already in the UNUSED state before we proceed.
4175 */
4176 if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
4177 return;
4178 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE);
4179 if (vport->phba->sli_rev == LPFC_SLI_REV4)
4180 lpfc_cleanup_vports_rrqs(vport, ndlp);
4181 lpfc_nlp_put(ndlp);
4182 return;
4183}
4184
4185/*
4186 * Start / ReStart rescue timer for Discovery / RSCN handling
4187 */
4188void
4189lpfc_set_disctmo(struct lpfc_vport *vport)
4190{
4191 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4192 struct lpfc_hba *phba = vport->phba;
4193 uint32_t tmo;
4194
4195 if (vport->port_state == LPFC_LOCAL_CFG_LINK) {
4196 /* For FAN, timeout should be greater than edtov */
4197 tmo = (((phba->fc_edtov + 999) / 1000) + 1);
4198 } else {
4199 /* Normal discovery timeout should be > than ELS/CT timeout
4200 * FC spec states we need 3 * ratov for CT requests
4201 */
4202 tmo = ((phba->fc_ratov * 3) + 3);
4203 }
4204
4205
4206 if (!timer_pending(&vport->fc_disctmo)) {
4207 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
4208 "set disc timer: tmo:x%x state:x%x flg:x%x",
4209 tmo, vport->port_state, vport->fc_flag);
4210 }
4211
4212 mod_timer(&vport->fc_disctmo, jiffies + HZ * tmo);
4213 spin_lock_irq(shost->host_lock);
4214 vport->fc_flag |= FC_DISC_TMO;
4215 spin_unlock_irq(shost->host_lock);
4216
4217 /* Start Discovery Timer state <hba_state> */
4218 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
4219 "0247 Start Discovery Timer state x%x "
4220 "Data: x%x x%lx x%x x%x\n",
4221 vport->port_state, tmo,
4222 (unsigned long)&vport->fc_disctmo, vport->fc_plogi_cnt,
4223 vport->fc_adisc_cnt);
4224
4225 return;
4226}
4227
4228/*
4229 * Cancel rescue timer for Discovery / RSCN handling
4230 */
4231int
4232lpfc_can_disctmo(struct lpfc_vport *vport)
4233{
4234 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4235 unsigned long iflags;
4236
4237 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
4238 "can disc timer: state:x%x rtry:x%x flg:x%x",
4239 vport->port_state, vport->fc_ns_retry, vport->fc_flag);
4240
4241 /* Turn off discovery timer if its running */
4242 if (vport->fc_flag & FC_DISC_TMO) {
4243 spin_lock_irqsave(shost->host_lock, iflags);
4244 vport->fc_flag &= ~FC_DISC_TMO;
4245 spin_unlock_irqrestore(shost->host_lock, iflags);
4246 del_timer_sync(&vport->fc_disctmo);
4247 spin_lock_irqsave(&vport->work_port_lock, iflags);
4248 vport->work_port_events &= ~WORKER_DISC_TMO;
4249 spin_unlock_irqrestore(&vport->work_port_lock, iflags);
4250 }
4251
4252 /* Cancel Discovery Timer state <hba_state> */
4253 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
4254 "0248 Cancel Discovery Timer state x%x "
4255 "Data: x%x x%x x%x\n",
4256 vport->port_state, vport->fc_flag,
4257 vport->fc_plogi_cnt, vport->fc_adisc_cnt);
4258 return 0;
4259}
4260
4261/*
4262 * Check specified ring for outstanding IOCB on the SLI queue
4263 * Return true if iocb matches the specified nport
4264 */
4265int
4266lpfc_check_sli_ndlp(struct lpfc_hba *phba,
4267 struct lpfc_sli_ring *pring,
4268 struct lpfc_iocbq *iocb,
4269 struct lpfc_nodelist *ndlp)
4270{
4271 struct lpfc_sli *psli = &phba->sli;
4272 IOCB_t *icmd = &iocb->iocb;
4273 struct lpfc_vport *vport = ndlp->vport;
4274
4275 if (iocb->vport != vport)
4276 return 0;
4277
4278 if (pring->ringno == LPFC_ELS_RING) {
4279 switch (icmd->ulpCommand) {
4280 case CMD_GEN_REQUEST64_CR:
4281 if (iocb->context_un.ndlp == ndlp)
4282 return 1;
4283 case CMD_ELS_REQUEST64_CR:
4284 if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID)
4285 return 1;
4286 case CMD_XMIT_ELS_RSP64_CX:
4287 if (iocb->context1 == (uint8_t *) ndlp)
4288 return 1;
4289 }
4290 } else if (pring->ringno == psli->extra_ring) {
4291
4292 } else if (pring->ringno == psli->fcp_ring) {
4293 /* Skip match check if waiting to relogin to FCP target */
4294 if ((ndlp->nlp_type & NLP_FCP_TARGET) &&
4295 (ndlp->nlp_flag & NLP_DELAY_TMO)) {
4296 return 0;
4297 }
4298 if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi) {
4299 return 1;
4300 }
4301 } else if (pring->ringno == psli->next_ring) {
4302
4303 }
4304 return 0;
4305}
4306
4307/*
4308 * Free resources / clean up outstanding I/Os
4309 * associated with nlp_rpi in the LPFC_NODELIST entry.
4310 */
4311static int
4312lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
4313{
4314 LIST_HEAD(completions);
4315 struct lpfc_sli *psli;
4316 struct lpfc_sli_ring *pring;
4317 struct lpfc_iocbq *iocb, *next_iocb;
4318 uint32_t i;
4319
4320 lpfc_fabric_abort_nport(ndlp);
4321
4322 /*
4323 * Everything that matches on txcmplq will be returned
4324 * by firmware with a no rpi error.
4325 */
4326 psli = &phba->sli;
4327 if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
4328 /* Now process each ring */
4329 for (i = 0; i < psli->num_rings; i++) {
4330 pring = &psli->ring[i];
4331
4332 spin_lock_irq(&phba->hbalock);
4333 list_for_each_entry_safe(iocb, next_iocb, &pring->txq,
4334 list) {
4335 /*
4336 * Check to see if iocb matches the nport we are
4337 * looking for
4338 */
4339 if ((lpfc_check_sli_ndlp(phba, pring, iocb,
4340 ndlp))) {
4341 /* It matches, so deque and call compl
4342 with an error */
4343 list_move_tail(&iocb->list,
4344 &completions);
4345 pring->txq_cnt--;
4346 }
4347 }
4348 spin_unlock_irq(&phba->hbalock);
4349 }
4350 }
4351
4352 /* Cancel all the IOCBs from the completions list */
4353 lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
4354 IOERR_SLI_ABORTED);
4355
4356 return 0;
4357}
4358
4359/**
4360 * lpfc_nlp_logo_unreg - Unreg mailbox completion handler before LOGO
4361 * @phba: Pointer to HBA context object.
4362 * @pmb: Pointer to mailbox object.
4363 *
4364 * This function will issue an ELS LOGO command after completing
4365 * the UNREG_RPI.
4366 **/
4367void
4368lpfc_nlp_logo_unreg(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
4369{
4370 struct lpfc_vport *vport = pmb->vport;
4371 struct lpfc_nodelist *ndlp;
4372
4373 ndlp = (struct lpfc_nodelist *)(pmb->context1);
4374 if (!ndlp)
4375 return;
4376 lpfc_issue_els_logo(vport, ndlp, 0);
4377}
4378
4379/*
4380 * Free rpi associated with LPFC_NODELIST entry.
4381 * This routine is called from lpfc_freenode(), when we are removing
4382 * a LPFC_NODELIST entry. It is also called if the driver initiates a
4383 * LOGO that completes successfully, and we are waiting to PLOGI back
4384 * to the remote NPort. In addition, it is called after we receive
4385 * and unsolicated ELS cmd, send back a rsp, the rsp completes and
4386 * we are waiting to PLOGI back to the remote NPort.
4387 */
4388int
4389lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4390{
4391 struct lpfc_hba *phba = vport->phba;
4392 LPFC_MBOXQ_t *mbox;
4393 int rc;
4394 uint16_t rpi;
4395
4396 if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
4397 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
4398 if (mbox) {
4399 /* SLI4 ports require the physical rpi value. */
4400 rpi = ndlp->nlp_rpi;
4401 if (phba->sli_rev == LPFC_SLI_REV4)
4402 rpi = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
4403
4404 lpfc_unreg_login(phba, vport->vpi, rpi, mbox);
4405 mbox->vport = vport;
4406 if (ndlp->nlp_flag & NLP_ISSUE_LOGO) {
4407 mbox->context1 = ndlp;
4408 mbox->mbox_cmpl = lpfc_nlp_logo_unreg;
4409 } else {
4410 mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
4411 }
4412
4413 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
4414 if (rc == MBX_NOT_FINISHED)
4415 mempool_free(mbox, phba->mbox_mem_pool);
4416 }
4417 lpfc_no_rpi(phba, ndlp);
4418
4419 if (phba->sli_rev != LPFC_SLI_REV4)
4420 ndlp->nlp_rpi = 0;
4421 ndlp->nlp_flag &= ~NLP_RPI_REGISTERED;
4422 ndlp->nlp_flag &= ~NLP_NPR_ADISC;
4423 return 1;
4424 }
4425 return 0;
4426}
4427
4428/**
4429 * lpfc_unreg_hba_rpis - Unregister rpis registered to the hba.
4430 * @phba: pointer to lpfc hba data structure.
4431 *
4432 * This routine is invoked to unregister all the currently registered RPIs
4433 * to the HBA.
4434 **/
4435void
4436lpfc_unreg_hba_rpis(struct lpfc_hba *phba)
4437{
4438 struct lpfc_vport **vports;
4439 struct lpfc_nodelist *ndlp;
4440 struct Scsi_Host *shost;
4441 int i;
4442
4443 vports = lpfc_create_vport_work_array(phba);
4444 if (!vports) {
4445 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
4446 "2884 Vport array allocation failed \n");
4447 return;
4448 }
4449 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
4450 shost = lpfc_shost_from_vport(vports[i]);
4451 spin_lock_irq(shost->host_lock);
4452 list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) {
4453 if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
4454 /* The mempool_alloc might sleep */
4455 spin_unlock_irq(shost->host_lock);
4456 lpfc_unreg_rpi(vports[i], ndlp);
4457 spin_lock_irq(shost->host_lock);
4458 }
4459 }
4460 spin_unlock_irq(shost->host_lock);
4461 }
4462 lpfc_destroy_vport_work_array(phba, vports);
4463}
4464
4465void
4466lpfc_unreg_all_rpis(struct lpfc_vport *vport)
4467{
4468 struct lpfc_hba *phba = vport->phba;
4469 LPFC_MBOXQ_t *mbox;
4470 int rc;
4471
4472 if (phba->sli_rev == LPFC_SLI_REV4) {
4473 lpfc_sli4_unreg_all_rpis(vport);
4474 return;
4475 }
4476
4477 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
4478 if (mbox) {
4479 lpfc_unreg_login(phba, vport->vpi, LPFC_UNREG_ALL_RPIS_VPORT,
4480 mbox);
4481 mbox->vport = vport;
4482 mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
4483 mbox->context1 = NULL;
4484 rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
4485 if (rc != MBX_TIMEOUT)
4486 mempool_free(mbox, phba->mbox_mem_pool);
4487
4488 if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
4489 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
4490 "1836 Could not issue "
4491 "unreg_login(all_rpis) status %d\n", rc);
4492 }
4493}
4494
4495void
4496lpfc_unreg_default_rpis(struct lpfc_vport *vport)
4497{
4498 struct lpfc_hba *phba = vport->phba;
4499 LPFC_MBOXQ_t *mbox;
4500 int rc;
4501
4502 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
4503 if (mbox) {
4504 lpfc_unreg_did(phba, vport->vpi, LPFC_UNREG_ALL_DFLT_RPIS,
4505 mbox);
4506 mbox->vport = vport;
4507 mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
4508 mbox->context1 = NULL;
4509 rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
4510 if (rc != MBX_TIMEOUT)
4511 mempool_free(mbox, phba->mbox_mem_pool);
4512
4513 if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
4514 lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
4515 "1815 Could not issue "
4516 "unreg_did (default rpis) status %d\n",
4517 rc);
4518 }
4519}
4520
4521/*
4522 * Free resources associated with LPFC_NODELIST entry
4523 * so it can be freed.
4524 */
4525static int
4526lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4527{
4528 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4529 struct lpfc_hba *phba = vport->phba;
4530 LPFC_MBOXQ_t *mb, *nextmb;
4531 struct lpfc_dmabuf *mp;
4532
4533 /* Cleanup node for NPort <nlp_DID> */
4534 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
4535 "0900 Cleanup node for NPort x%x "
4536 "Data: x%x x%x x%x\n",
4537 ndlp->nlp_DID, ndlp->nlp_flag,
4538 ndlp->nlp_state, ndlp->nlp_rpi);
4539 if (NLP_CHK_FREE_REQ(ndlp)) {
4540 lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
4541 "0280 lpfc_cleanup_node: ndlp:x%p "
4542 "usgmap:x%x refcnt:%d\n",
4543 (void *)ndlp, ndlp->nlp_usg_map,
4544 atomic_read(&ndlp->kref.refcount));
4545 lpfc_dequeue_node(vport, ndlp);
4546 } else {
4547 lpfc_printf_vlog(vport, KERN_WARNING, LOG_NODE,
4548 "0281 lpfc_cleanup_node: ndlp:x%p "
4549 "usgmap:x%x refcnt:%d\n",
4550 (void *)ndlp, ndlp->nlp_usg_map,
4551 atomic_read(&ndlp->kref.refcount));
4552 lpfc_disable_node(vport, ndlp);
4553 }
4554
4555
4556 /* Don't need to clean up REG_LOGIN64 cmds for Default RPI cleanup */
4557
4558 /* cleanup any ndlp on mbox q waiting for reglogin cmpl */
4559 if ((mb = phba->sli.mbox_active)) {
4560 if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
4561 !(mb->mbox_flag & LPFC_MBX_IMED_UNREG) &&
4562 (ndlp == (struct lpfc_nodelist *) mb->context2)) {
4563 mb->context2 = NULL;
4564 mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
4565 }
4566 }
4567
4568 spin_lock_irq(&phba->hbalock);
4569 /* Cleanup REG_LOGIN completions which are not yet processed */
4570 list_for_each_entry(mb, &phba->sli.mboxq_cmpl, list) {
4571 if ((mb->u.mb.mbxCommand != MBX_REG_LOGIN64) ||
4572 (mb->mbox_flag & LPFC_MBX_IMED_UNREG) ||
4573 (ndlp != (struct lpfc_nodelist *) mb->context2))
4574 continue;
4575
4576 mb->context2 = NULL;
4577 mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
4578 }
4579
4580 list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
4581 if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
4582 !(mb->mbox_flag & LPFC_MBX_IMED_UNREG) &&
4583 (ndlp == (struct lpfc_nodelist *) mb->context2)) {
4584 mp = (struct lpfc_dmabuf *) (mb->context1);
4585 if (mp) {
4586 __lpfc_mbuf_free(phba, mp->virt, mp->phys);
4587 kfree(mp);
4588 }
4589 list_del(&mb->list);
4590 mempool_free(mb, phba->mbox_mem_pool);
4591 /* We shall not invoke the lpfc_nlp_put to decrement
4592 * the ndlp reference count as we are in the process
4593 * of lpfc_nlp_release.
4594 */
4595 }
4596 }
4597 spin_unlock_irq(&phba->hbalock);
4598
4599 lpfc_els_abort(phba, ndlp);
4600
4601 spin_lock_irq(shost->host_lock);
4602 ndlp->nlp_flag &= ~NLP_DELAY_TMO;
4603 spin_unlock_irq(shost->host_lock);
4604
4605 ndlp->nlp_last_elscmd = 0;
4606 del_timer_sync(&ndlp->nlp_delayfunc);
4607
4608 list_del_init(&ndlp->els_retry_evt.evt_listp);
4609 list_del_init(&ndlp->dev_loss_evt.evt_listp);
4610 lpfc_cleanup_vports_rrqs(vport, ndlp);
4611 lpfc_unreg_rpi(vport, ndlp);
4612
4613 return 0;
4614}
4615
4616/*
4617 * Check to see if we can free the nlp back to the freelist.
4618 * If we are in the middle of using the nlp in the discovery state
4619 * machine, defer the free till we reach the end of the state machine.
4620 */
4621static void
4622lpfc_nlp_remove(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
4623{
4624 struct lpfc_hba *phba = vport->phba;
4625 struct lpfc_rport_data *rdata;
4626 LPFC_MBOXQ_t *mbox;
4627 int rc;
4628
4629 lpfc_cancel_retry_delay_tmo(vport, ndlp);
4630 if ((ndlp->nlp_flag & NLP_DEFER_RM) &&
4631 !(ndlp->nlp_flag & NLP_REG_LOGIN_SEND) &&
4632 !(ndlp->nlp_flag & NLP_RPI_REGISTERED)) {
4633 /* For this case we need to cleanup the default rpi
4634 * allocated by the firmware.
4635 */
4636 if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL))
4637 != NULL) {
4638 rc = lpfc_reg_rpi(phba, vport->vpi, ndlp->nlp_DID,
4639 (uint8_t *) &vport->fc_sparam, mbox, ndlp->nlp_rpi);
4640 if (rc) {
4641 mempool_free(mbox, phba->mbox_mem_pool);
4642 }
4643 else {
4644 mbox->mbox_flag |= LPFC_MBX_IMED_UNREG;
4645 mbox->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi;
4646 mbox->vport = vport;
4647 mbox->context2 = ndlp;
4648 rc =lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
4649 if (rc == MBX_NOT_FINISHED) {
4650 mempool_free(mbox, phba->mbox_mem_pool);
4651 }
4652 }
4653 }
4654 }
4655 lpfc_cleanup_node(vport, ndlp);
4656
4657 /*
4658 * We can get here with a non-NULL ndlp->rport because when we
4659 * unregister a rport we don't break the rport/node linkage. So if we
4660 * do, make sure we don't leaving any dangling pointers behind.
4661 */
4662 if (ndlp->rport) {
4663 rdata = ndlp->rport->dd_data;
4664 rdata->pnode = NULL;
4665 ndlp->rport = NULL;
4666 }
4667}
4668
4669static int
4670lpfc_matchdid(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
4671 uint32_t did)
4672{
4673 D_ID mydid, ndlpdid, matchdid;
4674
4675 if (did == Bcast_DID)
4676 return 0;
4677
4678 /* First check for Direct match */
4679 if (ndlp->nlp_DID == did)
4680 return 1;
4681
4682 /* Next check for area/domain identically equals 0 match */
4683 mydid.un.word = vport->fc_myDID;
4684 if ((mydid.un.b.domain == 0) && (mydid.un.b.area == 0)) {
4685 return 0;
4686 }
4687
4688 matchdid.un.word = did;
4689 ndlpdid.un.word = ndlp->nlp_DID;
4690 if (matchdid.un.b.id == ndlpdid.un.b.id) {
4691 if ((mydid.un.b.domain == matchdid.un.b.domain) &&
4692 (mydid.un.b.area == matchdid.un.b.area)) {
4693 if ((ndlpdid.un.b.domain == 0) &&
4694 (ndlpdid.un.b.area == 0)) {
4695 if (ndlpdid.un.b.id)
4696 return 1;
4697 }
4698 return 0;
4699 }
4700
4701 matchdid.un.word = ndlp->nlp_DID;
4702 if ((mydid.un.b.domain == ndlpdid.un.b.domain) &&
4703 (mydid.un.b.area == ndlpdid.un.b.area)) {
4704 if ((matchdid.un.b.domain == 0) &&
4705 (matchdid.un.b.area == 0)) {
4706 if (matchdid.un.b.id)
4707 return 1;
4708 }
4709 }
4710 }
4711 return 0;
4712}
4713
4714/* Search for a nodelist entry */
4715static struct lpfc_nodelist *
4716__lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did)
4717{
4718 struct lpfc_nodelist *ndlp;
4719 uint32_t data1;
4720
4721 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
4722 if (lpfc_matchdid(vport, ndlp, did)) {
4723 data1 = (((uint32_t) ndlp->nlp_state << 24) |
4724 ((uint32_t) ndlp->nlp_xri << 16) |
4725 ((uint32_t) ndlp->nlp_type << 8) |
4726 ((uint32_t) ndlp->nlp_rpi & 0xff));
4727 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
4728 "0929 FIND node DID "
4729 "Data: x%p x%x x%x x%x\n",
4730 ndlp, ndlp->nlp_DID,
4731 ndlp->nlp_flag, data1);
4732 return ndlp;
4733 }
4734 }
4735
4736 /* FIND node did <did> NOT FOUND */
4737 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
4738 "0932 FIND node did x%x NOT FOUND.\n", did);
4739 return NULL;
4740}
4741
4742struct lpfc_nodelist *
4743lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did)
4744{
4745 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4746 struct lpfc_nodelist *ndlp;
4747 unsigned long iflags;
4748
4749 spin_lock_irqsave(shost->host_lock, iflags);
4750 ndlp = __lpfc_findnode_did(vport, did);
4751 spin_unlock_irqrestore(shost->host_lock, iflags);
4752 return ndlp;
4753}
4754
4755struct lpfc_nodelist *
4756lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
4757{
4758 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4759 struct lpfc_nodelist *ndlp;
4760
4761 ndlp = lpfc_findnode_did(vport, did);
4762 if (!ndlp) {
4763 if ((vport->fc_flag & FC_RSCN_MODE) != 0 &&
4764 lpfc_rscn_payload_check(vport, did) == 0)
4765 return NULL;
4766 ndlp = (struct lpfc_nodelist *)
4767 mempool_alloc(vport->phba->nlp_mem_pool, GFP_KERNEL);
4768 if (!ndlp)
4769 return NULL;
4770 lpfc_nlp_init(vport, ndlp, did);
4771 lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
4772 spin_lock_irq(shost->host_lock);
4773 ndlp->nlp_flag |= NLP_NPR_2B_DISC;
4774 spin_unlock_irq(shost->host_lock);
4775 return ndlp;
4776 } else if (!NLP_CHK_NODE_ACT(ndlp)) {
4777 ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_NPR_NODE);
4778 if (!ndlp)
4779 return NULL;
4780 spin_lock_irq(shost->host_lock);
4781 ndlp->nlp_flag |= NLP_NPR_2B_DISC;
4782 spin_unlock_irq(shost->host_lock);
4783 return ndlp;
4784 }
4785
4786 if ((vport->fc_flag & FC_RSCN_MODE) &&
4787 !(vport->fc_flag & FC_NDISC_ACTIVE)) {
4788 if (lpfc_rscn_payload_check(vport, did)) {
4789 /* If we've already received a PLOGI from this NPort
4790 * we don't need to try to discover it again.
4791 */
4792 if (ndlp->nlp_flag & NLP_RCV_PLOGI)
4793 return NULL;
4794
4795 /* Since this node is marked for discovery,
4796 * delay timeout is not needed.
4797 */
4798 lpfc_cancel_retry_delay_tmo(vport, ndlp);
4799 spin_lock_irq(shost->host_lock);
4800 ndlp->nlp_flag |= NLP_NPR_2B_DISC;
4801 spin_unlock_irq(shost->host_lock);
4802 } else
4803 ndlp = NULL;
4804 } else {
4805 /* If we've already received a PLOGI from this NPort,
4806 * or we are already in the process of discovery on it,
4807 * we don't need to try to discover it again.
4808 */
4809 if (ndlp->nlp_state == NLP_STE_ADISC_ISSUE ||
4810 ndlp->nlp_state == NLP_STE_PLOGI_ISSUE ||
4811 ndlp->nlp_flag & NLP_RCV_PLOGI)
4812 return NULL;
4813 lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
4814 spin_lock_irq(shost->host_lock);
4815 ndlp->nlp_flag |= NLP_NPR_2B_DISC;
4816 spin_unlock_irq(shost->host_lock);
4817 }
4818 return ndlp;
4819}
4820
4821/* Build a list of nodes to discover based on the loopmap */
4822void
4823lpfc_disc_list_loopmap(struct lpfc_vport *vport)
4824{
4825 struct lpfc_hba *phba = vport->phba;
4826 int j;
4827 uint32_t alpa, index;
4828
4829 if (!lpfc_is_link_up(phba))
4830 return;
4831
4832 if (phba->fc_topology != LPFC_TOPOLOGY_LOOP)
4833 return;
4834
4835 /* Check for loop map present or not */
4836 if (phba->alpa_map[0]) {
4837 for (j = 1; j <= phba->alpa_map[0]; j++) {
4838 alpa = phba->alpa_map[j];
4839 if (((vport->fc_myDID & 0xff) == alpa) || (alpa == 0))
4840 continue;
4841 lpfc_setup_disc_node(vport, alpa);
4842 }
4843 } else {
4844 /* No alpamap, so try all alpa's */
4845 for (j = 0; j < FC_MAXLOOP; j++) {
4846 /* If cfg_scan_down is set, start from highest
4847 * ALPA (0xef) to lowest (0x1).
4848 */
4849 if (vport->cfg_scan_down)
4850 index = j;
4851 else
4852 index = FC_MAXLOOP - j - 1;
4853 alpa = lpfcAlpaArray[index];
4854 if ((vport->fc_myDID & 0xff) == alpa)
4855 continue;
4856 lpfc_setup_disc_node(vport, alpa);
4857 }
4858 }
4859 return;
4860}
4861
4862void
4863lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport)
4864{
4865 LPFC_MBOXQ_t *mbox;
4866 struct lpfc_sli *psli = &phba->sli;
4867 struct lpfc_sli_ring *extra_ring = &psli->ring[psli->extra_ring];
4868 struct lpfc_sli_ring *fcp_ring = &psli->ring[psli->fcp_ring];
4869 struct lpfc_sli_ring *next_ring = &psli->ring[psli->next_ring];
4870 int rc;
4871
4872 /*
4873 * if it's not a physical port or if we already send
4874 * clear_la then don't send it.
4875 */
4876 if ((phba->link_state >= LPFC_CLEAR_LA) ||
4877 (vport->port_type != LPFC_PHYSICAL_PORT) ||
4878 (phba->sli_rev == LPFC_SLI_REV4))
4879 return;
4880
4881 /* Link up discovery */
4882 if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL)) != NULL) {
4883 phba->link_state = LPFC_CLEAR_LA;
4884 lpfc_clear_la(phba, mbox);
4885 mbox->mbox_cmpl = lpfc_mbx_cmpl_clear_la;
4886 mbox->vport = vport;
4887 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
4888 if (rc == MBX_NOT_FINISHED) {
4889 mempool_free(mbox, phba->mbox_mem_pool);
4890 lpfc_disc_flush_list(vport);
4891 extra_ring->flag &= ~LPFC_STOP_IOCB_EVENT;
4892 fcp_ring->flag &= ~LPFC_STOP_IOCB_EVENT;
4893 next_ring->flag &= ~LPFC_STOP_IOCB_EVENT;
4894 phba->link_state = LPFC_HBA_ERROR;
4895 }
4896 }
4897}
4898
4899/* Reg_vpi to tell firmware to resume normal operations */
4900void
4901lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport)
4902{
4903 LPFC_MBOXQ_t *regvpimbox;
4904
4905 regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
4906 if (regvpimbox) {
4907 lpfc_reg_vpi(vport, regvpimbox);
4908 regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi;
4909 regvpimbox->vport = vport;
4910 if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT)
4911 == MBX_NOT_FINISHED) {
4912 mempool_free(regvpimbox, phba->mbox_mem_pool);
4913 }
4914 }
4915}
4916
4917/* Start Link up / RSCN discovery on NPR nodes */
4918void
4919lpfc_disc_start(struct lpfc_vport *vport)
4920{
4921 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
4922 struct lpfc_hba *phba = vport->phba;
4923 uint32_t num_sent;
4924 uint32_t clear_la_pending;
4925 int did_changed;
4926
4927 if (!lpfc_is_link_up(phba))
4928 return;
4929
4930 if (phba->link_state == LPFC_CLEAR_LA)
4931 clear_la_pending = 1;
4932 else
4933 clear_la_pending = 0;
4934
4935 if (vport->port_state < LPFC_VPORT_READY)
4936 vport->port_state = LPFC_DISC_AUTH;
4937
4938 lpfc_set_disctmo(vport);
4939
4940 if (vport->fc_prevDID == vport->fc_myDID)
4941 did_changed = 0;
4942 else
4943 did_changed = 1;
4944
4945 vport->fc_prevDID = vport->fc_myDID;
4946 vport->num_disc_nodes = 0;
4947
4948 /* Start Discovery state <hba_state> */
4949 lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
4950 "0202 Start Discovery hba state x%x "
4951 "Data: x%x x%x x%x\n",
4952 vport->port_state, vport->fc_flag, vport->fc_plogi_cnt,
4953 vport->fc_adisc_cnt);
4954
4955 /* First do ADISCs - if any */
4956 num_sent = lpfc_els_disc_adisc(vport);
4957
4958 if (num_sent)
4959 return;
4960
4961 /* Register the VPI for SLI3, NON-NPIV only. */
4962 if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
4963 !(vport->fc_flag & FC_PT2PT) &&
4964 !(vport->fc_flag & FC_RSCN_MODE) &&
4965 (phba->sli_rev < LPFC_SLI_REV4)) {
4966 lpfc_issue_reg_vpi(phba, vport);
4967 return;
4968 }
4969
4970 /*
4971 * For SLI2, we need to set port_state to READY and continue
4972 * discovery.
4973 */
4974 if (vport->port_state < LPFC_VPORT_READY && !clear_la_pending) {
4975 /* If we get here, there is nothing to ADISC */
4976 if (vport->port_type == LPFC_PHYSICAL_PORT)
4977 lpfc_issue_clear_la(phba, vport);
4978
4979 if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) {
4980 vport->num_disc_nodes = 0;
4981 /* go thru NPR nodes and issue ELS PLOGIs */
4982 if (vport->fc_npr_cnt)
4983 lpfc_els_disc_plogi(vport);
4984
4985 if (!vport->num_disc_nodes) {
4986 spin_lock_irq(shost->host_lock);
4987 vport->fc_flag &= ~FC_NDISC_ACTIVE;
4988 spin_unlock_irq(shost->host_lock);
4989 lpfc_can_disctmo(vport);
4990 }
4991 }
4992 vport->port_state = LPFC_VPORT_READY;
4993 } else {
4994 /* Next do PLOGIs - if any */
4995 num_sent = lpfc_els_disc_plogi(vport);
4996
4997 if (num_sent)
4998 return;
4999
5000 if (vport->fc_flag & FC_RSCN_MODE) {
5001 /* Check to see if more RSCNs came in while we
5002 * were processing this one.
5003 */
5004 if ((vport->fc_rscn_id_cnt == 0) &&
5005 (!(vport->fc_flag & FC_RSCN_DISCOVERY))) {
5006 spin_lock_irq(shost->host_lock);
5007 vport->fc_flag &= ~FC_RSCN_MODE;
5008 spin_unlock_irq(shost->host_lock);
5009 lpfc_can_disctmo(vport);
5010 } else
5011 lpfc_els_handle_rscn(vport);
5012 }
5013 }
5014 return;
5015}
5016
5017/*
5018 * Ignore completion for all IOCBs on tx and txcmpl queue for ELS
5019 * ring the match the sppecified nodelist.
5020 */
5021static void
5022lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
5023{
5024 LIST_HEAD(completions);
5025 struct lpfc_sli *psli;
5026 IOCB_t *icmd;
5027 struct lpfc_iocbq *iocb, *next_iocb;
5028 struct lpfc_sli_ring *pring;
5029
5030 psli = &phba->sli;
5031 pring = &psli->ring[LPFC_ELS_RING];
5032
5033 /* Error matching iocb on txq or txcmplq
5034 * First check the txq.
5035 */
5036 spin_lock_irq(&phba->hbalock);
5037 list_for_each_entry_safe(iocb, next_iocb, &pring->txq, list) {
5038 if (iocb->context1 != ndlp) {
5039 continue;
5040 }
5041 icmd = &iocb->iocb;
5042 if ((icmd->ulpCommand == CMD_ELS_REQUEST64_CR) ||
5043 (icmd->ulpCommand == CMD_XMIT_ELS_RSP64_CX)) {
5044
5045 list_move_tail(&iocb->list, &completions);
5046 pring->txq_cnt--;
5047 }
5048 }
5049
5050 /* Next check the txcmplq */
5051 list_for_each_entry_safe(iocb, next_iocb, &pring->txcmplq, list) {
5052 if (iocb->context1 != ndlp) {
5053 continue;
5054 }
5055 icmd = &iocb->iocb;
5056 if (icmd->ulpCommand == CMD_ELS_REQUEST64_CR ||
5057 icmd->ulpCommand == CMD_XMIT_ELS_RSP64_CX) {
5058 lpfc_sli_issue_abort_iotag(phba, pring, iocb);
5059 }
5060 }
5061 spin_unlock_irq(&phba->hbalock);
5062
5063 /* Cancel all the IOCBs from the completions list */
5064 lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
5065 IOERR_SLI_ABORTED);
5066}
5067
5068static void
5069lpfc_disc_flush_list(struct lpfc_vport *vport)
5070{
5071 struct lpfc_nodelist *ndlp, *next_ndlp;
5072 struct lpfc_hba *phba = vport->phba;
5073
5074 if (vport->fc_plogi_cnt || vport->fc_adisc_cnt) {
5075 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes,
5076 nlp_listp) {
5077 if (!NLP_CHK_NODE_ACT(ndlp))
5078 continue;
5079 if (ndlp->nlp_state == NLP_STE_PLOGI_ISSUE ||
5080 ndlp->nlp_state == NLP_STE_ADISC_ISSUE) {
5081 lpfc_free_tx(phba, ndlp);
5082 }
5083 }
5084 }
5085}
5086
5087void
5088lpfc_cleanup_discovery_resources(struct lpfc_vport *vport)
5089{
5090 lpfc_els_flush_rscn(vport);
5091 lpfc_els_flush_cmd(vport);
5092 lpfc_disc_flush_list(vport);
5093}
5094
5095/*****************************************************************************/
5096/*
5097 * NAME: lpfc_disc_timeout
5098 *
5099 * FUNCTION: Fibre Channel driver discovery timeout routine.
5100 *
5101 * EXECUTION ENVIRONMENT: interrupt only
5102 *
5103 * CALLED FROM:
5104 * Timer function
5105 *
5106 * RETURNS:
5107 * none
5108 */
5109/*****************************************************************************/
5110void
5111lpfc_disc_timeout(unsigned long ptr)
5112{
5113 struct lpfc_vport *vport = (struct lpfc_vport *) ptr;
5114 struct lpfc_hba *phba = vport->phba;
5115 uint32_t tmo_posted;
5116 unsigned long flags = 0;
5117
5118 if (unlikely(!phba))
5119 return;
5120
5121 spin_lock_irqsave(&vport->work_port_lock, flags);
5122 tmo_posted = vport->work_port_events & WORKER_DISC_TMO;
5123 if (!tmo_posted)
5124 vport->work_port_events |= WORKER_DISC_TMO;
5125 spin_unlock_irqrestore(&vport->work_port_lock, flags);
5126
5127 if (!tmo_posted)
5128 lpfc_worker_wake_up(phba);
5129 return;
5130}
5131
5132static void
5133lpfc_disc_timeout_handler(struct lpfc_vport *vport)
5134{
5135 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
5136 struct lpfc_hba *phba = vport->phba;
5137 struct lpfc_sli *psli = &phba->sli;
5138 struct lpfc_nodelist *ndlp, *next_ndlp;
5139 LPFC_MBOXQ_t *initlinkmbox;
5140 int rc, clrlaerr = 0;
5141
5142 if (!(vport->fc_flag & FC_DISC_TMO))
5143 return;
5144
5145 spin_lock_irq(shost->host_lock);
5146 vport->fc_flag &= ~FC_DISC_TMO;
5147 spin_unlock_irq(shost->host_lock);
5148
5149 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
5150 "disc timeout: state:x%x rtry:x%x flg:x%x",
5151 vport->port_state, vport->fc_ns_retry, vport->fc_flag);
5152
5153 switch (vport->port_state) {
5154
5155 case LPFC_LOCAL_CFG_LINK:
5156 /* port_state is identically LPFC_LOCAL_CFG_LINK while waiting for
5157 * FAN
5158 */
5159 /* FAN timeout */
5160 lpfc_printf_vlog(vport, KERN_WARNING, LOG_DISCOVERY,
5161 "0221 FAN timeout\n");
5162 /* Start discovery by sending FLOGI, clean up old rpis */
5163 list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes,
5164 nlp_listp) {
5165 if (!NLP_CHK_NODE_ACT(ndlp))
5166 continue;
5167 if (ndlp->nlp_state != NLP_STE_NPR_NODE)
5168 continue;
5169 if (ndlp->nlp_type & NLP_FABRIC) {
5170 /* Clean up the ndlp on Fabric connections */
5171 lpfc_drop_node(vport, ndlp);
5172
5173 } else if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) {
5174 /* Fail outstanding IO now since device
5175 * is marked for PLOGI.
5176 */
5177 lpfc_unreg_rpi(vport, ndlp);
5178 }
5179 }
5180 if (vport->port_state != LPFC_FLOGI) {
5181 if (phba->sli_rev <= LPFC_SLI_REV3)
5182 lpfc_initial_flogi(vport);
5183 else
5184 lpfc_issue_init_vfi(vport);
5185 return;
5186 }
5187 break;
5188
5189 case LPFC_FDISC:
5190 case LPFC_FLOGI:
5191 /* port_state is identically LPFC_FLOGI while waiting for FLOGI cmpl */
5192 /* Initial FLOGI timeout */
5193 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5194 "0222 Initial %s timeout\n",
5195 vport->vpi ? "FDISC" : "FLOGI");
5196
5197 /* Assume no Fabric and go on with discovery.
5198 * Check for outstanding ELS FLOGI to abort.
5199 */
5200
5201 /* FLOGI failed, so just use loop map to make discovery list */
5202 lpfc_disc_list_loopmap(vport);
5203
5204 /* Start discovery */
5205 lpfc_disc_start(vport);
5206 break;
5207
5208 case LPFC_FABRIC_CFG_LINK:
5209 /* hba_state is identically LPFC_FABRIC_CFG_LINK while waiting for
5210 NameServer login */
5211 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5212 "0223 Timeout while waiting for "
5213 "NameServer login\n");
5214 /* Next look for NameServer ndlp */
5215 ndlp = lpfc_findnode_did(vport, NameServer_DID);
5216 if (ndlp && NLP_CHK_NODE_ACT(ndlp))
5217 lpfc_els_abort(phba, ndlp);
5218
5219 /* ReStart discovery */
5220 goto restart_disc;
5221
5222 case LPFC_NS_QRY:
5223 /* Check for wait for NameServer Rsp timeout */
5224 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5225 "0224 NameServer Query timeout "
5226 "Data: x%x x%x\n",
5227 vport->fc_ns_retry, LPFC_MAX_NS_RETRY);
5228
5229 if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) {
5230 /* Try it one more time */
5231 vport->fc_ns_retry++;
5232 rc = lpfc_ns_cmd(vport, SLI_CTNS_GID_FT,
5233 vport->fc_ns_retry, 0);
5234 if (rc == 0)
5235 break;
5236 }
5237 vport->fc_ns_retry = 0;
5238
5239restart_disc:
5240 /*
5241 * Discovery is over.
5242 * set port_state to PORT_READY if SLI2.
5243 * cmpl_reg_vpi will set port_state to READY for SLI3.
5244 */
5245 if (phba->sli_rev < LPFC_SLI_REV4) {
5246 if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
5247 lpfc_issue_reg_vpi(phba, vport);
5248 else {
5249 lpfc_issue_clear_la(phba, vport);
5250 vport->port_state = LPFC_VPORT_READY;
5251 }
5252 }
5253
5254 /* Setup and issue mailbox INITIALIZE LINK command */
5255 initlinkmbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
5256 if (!initlinkmbox) {
5257 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5258 "0206 Device Discovery "
5259 "completion error\n");
5260 phba->link_state = LPFC_HBA_ERROR;
5261 break;
5262 }
5263
5264 lpfc_linkdown(phba);
5265 lpfc_init_link(phba, initlinkmbox, phba->cfg_topology,
5266 phba->cfg_link_speed);
5267 initlinkmbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
5268 initlinkmbox->vport = vport;
5269 initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
5270 rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT);
5271 lpfc_set_loopback_flag(phba);
5272 if (rc == MBX_NOT_FINISHED)
5273 mempool_free(initlinkmbox, phba->mbox_mem_pool);
5274
5275 break;
5276
5277 case LPFC_DISC_AUTH:
5278 /* Node Authentication timeout */
5279 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5280 "0227 Node Authentication timeout\n");
5281 lpfc_disc_flush_list(vport);
5282
5283 /*
5284 * set port_state to PORT_READY if SLI2.
5285 * cmpl_reg_vpi will set port_state to READY for SLI3.
5286 */
5287 if (phba->sli_rev < LPFC_SLI_REV4) {
5288 if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
5289 lpfc_issue_reg_vpi(phba, vport);
5290 else { /* NPIV Not enabled */
5291 lpfc_issue_clear_la(phba, vport);
5292 vport->port_state = LPFC_VPORT_READY;
5293 }
5294 }
5295 break;
5296
5297 case LPFC_VPORT_READY:
5298 if (vport->fc_flag & FC_RSCN_MODE) {
5299 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5300 "0231 RSCN timeout Data: x%x "
5301 "x%x\n",
5302 vport->fc_ns_retry, LPFC_MAX_NS_RETRY);
5303
5304 /* Cleanup any outstanding ELS commands */
5305 lpfc_els_flush_cmd(vport);
5306
5307 lpfc_els_flush_rscn(vport);
5308 lpfc_disc_flush_list(vport);
5309 }
5310 break;
5311
5312 default:
5313 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5314 "0273 Unexpected discovery timeout, "
5315 "vport State x%x\n", vport->port_state);
5316 break;
5317 }
5318
5319 switch (phba->link_state) {
5320 case LPFC_CLEAR_LA:
5321 /* CLEAR LA timeout */
5322 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5323 "0228 CLEAR LA timeout\n");
5324 clrlaerr = 1;
5325 break;
5326
5327 case LPFC_LINK_UP:
5328 lpfc_issue_clear_la(phba, vport);
5329 /* Drop thru */
5330 case LPFC_LINK_UNKNOWN:
5331 case LPFC_WARM_START:
5332 case LPFC_INIT_START:
5333 case LPFC_INIT_MBX_CMDS:
5334 case LPFC_LINK_DOWN:
5335 case LPFC_HBA_ERROR:
5336 lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
5337 "0230 Unexpected timeout, hba link "
5338 "state x%x\n", phba->link_state);
5339 clrlaerr = 1;
5340 break;
5341
5342 case LPFC_HBA_READY:
5343 break;
5344 }
5345
5346 if (clrlaerr) {
5347 lpfc_disc_flush_list(vport);
5348 psli->ring[(psli->extra_ring)].flag &= ~LPFC_STOP_IOCB_EVENT;
5349 psli->ring[(psli->fcp_ring)].flag &= ~LPFC_STOP_IOCB_EVENT;
5350 psli->ring[(psli->next_ring)].flag &= ~LPFC_STOP_IOCB_EVENT;
5351 vport->port_state = LPFC_VPORT_READY;
5352 }
5353
5354 return;
5355}
5356
5357/*
5358 * This routine handles processing a NameServer REG_LOGIN mailbox
5359 * command upon completion. It is setup in the LPFC_MBOXQ
5360 * as the completion routine when the command is
5361 * handed off to the SLI layer.
5362 */
5363void
5364lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
5365{
5366 MAILBOX_t *mb = &pmb->u.mb;
5367 struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
5368 struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
5369 struct lpfc_vport *vport = pmb->vport;
5370
5371 pmb->context1 = NULL;
5372 pmb->context2 = NULL;
5373
5374 if (phba->sli_rev < LPFC_SLI_REV4)
5375 ndlp->nlp_rpi = mb->un.varWords[0];
5376 ndlp->nlp_flag |= NLP_RPI_REGISTERED;
5377 ndlp->nlp_type |= NLP_FABRIC;
5378 lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
5379
5380 /*
5381 * Start issuing Fabric-Device Management Interface (FDMI) command to
5382 * 0xfffffa (FDMI well known port) or Delay issuing FDMI command if
5383 * fdmi-on=2 (supporting RPA/hostnmae)
5384 */
5385
5386 if (vport->cfg_fdmi_on == 1)
5387 lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA);
5388 else
5389 mod_timer(&vport->fc_fdmitmo, jiffies + HZ * 60);
5390
5391 /* decrement the node reference count held for this callback
5392 * function.
5393 */
5394 lpfc_nlp_put(ndlp);
5395 lpfc_mbuf_free(phba, mp->virt, mp->phys);
5396 kfree(mp);
5397 mempool_free(pmb, phba->mbox_mem_pool);
5398
5399 return;
5400}
5401
5402static int
5403lpfc_filter_by_rpi(struct lpfc_nodelist *ndlp, void *param)
5404{
5405 uint16_t *rpi = param;
5406
5407 /* check for active node */
5408 if (!NLP_CHK_NODE_ACT(ndlp))
5409 return 0;
5410
5411 return ndlp->nlp_rpi == *rpi;
5412}
5413
5414static int
5415lpfc_filter_by_wwpn(struct lpfc_nodelist *ndlp, void *param)
5416{
5417 return memcmp(&ndlp->nlp_portname, param,
5418 sizeof(ndlp->nlp_portname)) == 0;
5419}
5420
5421static struct lpfc_nodelist *
5422__lpfc_find_node(struct lpfc_vport *vport, node_filter filter, void *param)
5423{
5424 struct lpfc_nodelist *ndlp;
5425
5426 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
5427 if (filter(ndlp, param)) {
5428 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
5429 "3185 FIND node filter %p DID "
5430 "Data: x%p x%x x%x\n",
5431 filter, ndlp, ndlp->nlp_DID,
5432 ndlp->nlp_flag);
5433 return ndlp;
5434 }
5435 }
5436 lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE,
5437 "3186 FIND node filter %p NOT FOUND.\n", filter);
5438 return NULL;
5439}
5440
5441/*
5442 * This routine looks up the ndlp lists for the given RPI. If rpi found it
5443 * returns the node list element pointer else return NULL.
5444 */
5445struct lpfc_nodelist *
5446__lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi)
5447{
5448 return __lpfc_find_node(vport, lpfc_filter_by_rpi, &rpi);
5449}
5450
5451/*
5452 * This routine looks up the ndlp lists for the given WWPN. If WWPN found it
5453 * returns the node element list pointer else return NULL.
5454 */
5455struct lpfc_nodelist *
5456lpfc_findnode_wwpn(struct lpfc_vport *vport, struct lpfc_name *wwpn)
5457{
5458 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
5459 struct lpfc_nodelist *ndlp;
5460
5461 spin_lock_irq(shost->host_lock);
5462 ndlp = __lpfc_find_node(vport, lpfc_filter_by_wwpn, wwpn);
5463 spin_unlock_irq(shost->host_lock);
5464 return ndlp;
5465}
5466
5467/*
5468 * This routine looks up the ndlp lists for the given RPI. If the rpi
5469 * is found, the routine returns the node element list pointer else
5470 * return NULL.
5471 */
5472struct lpfc_nodelist *
5473lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi)
5474{
5475 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
5476 struct lpfc_nodelist *ndlp;
5477
5478 spin_lock_irq(shost->host_lock);
5479 ndlp = __lpfc_findnode_rpi(vport, rpi);
5480 spin_unlock_irq(shost->host_lock);
5481 return ndlp;
5482}
5483
5484/**
5485 * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
5486 * @phba: pointer to lpfc hba data structure.
5487 * @vpi: the physical host virtual N_Port identifier.
5488 *
5489 * This routine finds a vport on a HBA (referred by @phba) through a
5490 * @vpi. The function walks the HBA's vport list and returns the address
5491 * of the vport with the matching @vpi.
5492 *
5493 * Return code
5494 * NULL - No vport with the matching @vpi found
5495 * Otherwise - Address to the vport with the matching @vpi.
5496 **/
5497struct lpfc_vport *
5498lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
5499{
5500 struct lpfc_vport *vport;
5501 unsigned long flags;
5502 int i = 0;
5503
5504 /* The physical ports are always vpi 0 - translate is unnecessary. */
5505 if (vpi > 0) {
5506 /*
5507 * Translate the physical vpi to the logical vpi. The
5508 * vport stores the logical vpi.
5509 */
5510 for (i = 0; i < phba->max_vpi; i++) {
5511 if (vpi == phba->vpi_ids[i])
5512 break;
5513 }
5514
5515 if (i >= phba->max_vpi) {
5516 lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
5517 "2936 Could not find Vport mapped "
5518 "to vpi %d\n", vpi);
5519 return NULL;
5520 }
5521 }
5522
5523 spin_lock_irqsave(&phba->hbalock, flags);
5524 list_for_each_entry(vport, &phba->port_list, listentry) {
5525 if (vport->vpi == i) {
5526 spin_unlock_irqrestore(&phba->hbalock, flags);
5527 return vport;
5528 }
5529 }
5530 spin_unlock_irqrestore(&phba->hbalock, flags);
5531 return NULL;
5532}
5533
5534void
5535lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
5536 uint32_t did)
5537{
5538 memset(ndlp, 0, sizeof (struct lpfc_nodelist));
5539
5540 lpfc_initialize_node(vport, ndlp, did);
5541 INIT_LIST_HEAD(&ndlp->nlp_listp);
5542
5543 lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_NODE,
5544 "node init: did:x%x",
5545 ndlp->nlp_DID, 0, 0);
5546
5547 return;
5548}
5549
5550/* This routine releases all resources associated with a specifc NPort's ndlp
5551 * and mempool_free's the nodelist.
5552 */
5553static void
5554lpfc_nlp_release(struct kref *kref)
5555{
5556 struct lpfc_hba *phba;
5557 unsigned long flags;
5558 struct lpfc_nodelist *ndlp = container_of(kref, struct lpfc_nodelist,
5559 kref);
5560
5561 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE,
5562 "node release: did:x%x flg:x%x type:x%x",
5563 ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
5564
5565 lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
5566 "0279 lpfc_nlp_release: ndlp:x%p did %x "
5567 "usgmap:x%x refcnt:%d\n",
5568 (void *)ndlp, ndlp->nlp_DID, ndlp->nlp_usg_map,
5569 atomic_read(&ndlp->kref.refcount));
5570
5571 /* remove ndlp from action. */
5572 lpfc_nlp_remove(ndlp->vport, ndlp);
5573
5574 /* clear the ndlp active flag for all release cases */
5575 phba = ndlp->phba;
5576 spin_lock_irqsave(&phba->ndlp_lock, flags);
5577 NLP_CLR_NODE_ACT(ndlp);
5578 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
5579 if (phba->sli_rev == LPFC_SLI_REV4)
5580 lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
5581
5582 /* free ndlp memory for final ndlp release */
5583 if (NLP_CHK_FREE_REQ(ndlp)) {
5584 kfree(ndlp->lat_data);
5585 mempool_free(ndlp, ndlp->phba->nlp_mem_pool);
5586 }
5587}
5588
5589/* This routine bumps the reference count for a ndlp structure to ensure
5590 * that one discovery thread won't free a ndlp while another discovery thread
5591 * is using it.
5592 */
5593struct lpfc_nodelist *
5594lpfc_nlp_get(struct lpfc_nodelist *ndlp)
5595{
5596 struct lpfc_hba *phba;
5597 unsigned long flags;
5598
5599 if (ndlp) {
5600 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE,
5601 "node get: did:x%x flg:x%x refcnt:x%x",
5602 ndlp->nlp_DID, ndlp->nlp_flag,
5603 atomic_read(&ndlp->kref.refcount));
5604 /* The check of ndlp usage to prevent incrementing the
5605 * ndlp reference count that is in the process of being
5606 * released.
5607 */
5608 phba = ndlp->phba;
5609 spin_lock_irqsave(&phba->ndlp_lock, flags);
5610 if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) {
5611 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
5612 lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE,
5613 "0276 lpfc_nlp_get: ndlp:x%p "
5614 "usgmap:x%x refcnt:%d\n",
5615 (void *)ndlp, ndlp->nlp_usg_map,
5616 atomic_read(&ndlp->kref.refcount));
5617 return NULL;
5618 } else
5619 kref_get(&ndlp->kref);
5620 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
5621 }
5622 return ndlp;
5623}
5624
5625/* This routine decrements the reference count for a ndlp structure. If the
5626 * count goes to 0, this indicates the the associated nodelist should be
5627 * freed. Returning 1 indicates the ndlp resource has been released; on the
5628 * other hand, returning 0 indicates the ndlp resource has not been released
5629 * yet.
5630 */
5631int
5632lpfc_nlp_put(struct lpfc_nodelist *ndlp)
5633{
5634 struct lpfc_hba *phba;
5635 unsigned long flags;
5636
5637 if (!ndlp)
5638 return 1;
5639
5640 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE,
5641 "node put: did:x%x flg:x%x refcnt:x%x",
5642 ndlp->nlp_DID, ndlp->nlp_flag,
5643 atomic_read(&ndlp->kref.refcount));
5644 phba = ndlp->phba;
5645 spin_lock_irqsave(&phba->ndlp_lock, flags);
5646 /* Check the ndlp memory free acknowledge flag to avoid the
5647 * possible race condition that kref_put got invoked again
5648 * after previous one has done ndlp memory free.
5649 */
5650 if (NLP_CHK_FREE_ACK(ndlp)) {
5651 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
5652 lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE,
5653 "0274 lpfc_nlp_put: ndlp:x%p "
5654 "usgmap:x%x refcnt:%d\n",
5655 (void *)ndlp, ndlp->nlp_usg_map,
5656 atomic_read(&ndlp->kref.refcount));
5657 return 1;
5658 }
5659 /* Check the ndlp inactivate log flag to avoid the possible
5660 * race condition that kref_put got invoked again after ndlp
5661 * is already in inactivating state.
5662 */
5663 if (NLP_CHK_IACT_REQ(ndlp)) {
5664 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
5665 lpfc_printf_vlog(ndlp->vport, KERN_WARNING, LOG_NODE,
5666 "0275 lpfc_nlp_put: ndlp:x%p "
5667 "usgmap:x%x refcnt:%d\n",
5668 (void *)ndlp, ndlp->nlp_usg_map,
5669 atomic_read(&ndlp->kref.refcount));
5670 return 1;
5671 }
5672 /* For last put, mark the ndlp usage flags to make sure no
5673 * other kref_get and kref_put on the same ndlp shall get
5674 * in between the process when the final kref_put has been
5675 * invoked on this ndlp.
5676 */
5677 if (atomic_read(&ndlp->kref.refcount) == 1) {
5678 /* Indicate ndlp is put to inactive state. */
5679 NLP_SET_IACT_REQ(ndlp);
5680 /* Acknowledge ndlp memory free has been seen. */
5681 if (NLP_CHK_FREE_REQ(ndlp))
5682 NLP_SET_FREE_ACK(ndlp);
5683 }
5684 spin_unlock_irqrestore(&phba->ndlp_lock, flags);
5685 /* Note, the kref_put returns 1 when decrementing a reference
5686 * count that was 1, it invokes the release callback function,
5687 * but it still left the reference count as 1 (not actually
5688 * performs the last decrementation). Otherwise, it actually
5689 * decrements the reference count and returns 0.
5690 */
5691 return kref_put(&ndlp->kref, lpfc_nlp_release);
5692}
5693
5694/* This routine free's the specified nodelist if it is not in use
5695 * by any other discovery thread. This routine returns 1 if the
5696 * ndlp has been freed. A return value of 0 indicates the ndlp is
5697 * not yet been released.
5698 */
5699int
5700lpfc_nlp_not_used(struct lpfc_nodelist *ndlp)
5701{
5702 lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_NODE,
5703 "node not used: did:x%x flg:x%x refcnt:x%x",
5704 ndlp->nlp_DID, ndlp->nlp_flag,
5705 atomic_read(&ndlp->kref.refcount));
5706 if (atomic_read(&ndlp->kref.refcount) == 1)
5707 if (lpfc_nlp_put(ndlp))
5708 return 1;
5709 return 0;
5710}
5711
5712/**
5713 * lpfc_fcf_inuse - Check if FCF can be unregistered.
5714 * @phba: Pointer to hba context object.
5715 *
5716 * This function iterate through all FC nodes associated
5717 * will all vports to check if there is any node with
5718 * fc_rports associated with it. If there is an fc_rport
5719 * associated with the node, then the node is either in
5720 * discovered state or its devloss_timer is pending.
5721 */
5722static int
5723lpfc_fcf_inuse(struct lpfc_hba *phba)
5724{
5725 struct lpfc_vport **vports;
5726 int i, ret = 0;
5727 struct lpfc_nodelist *ndlp;
5728 struct Scsi_Host *shost;
5729
5730 vports = lpfc_create_vport_work_array(phba);
5731
5732 /* If driver cannot allocate memory, indicate fcf is in use */
5733 if (!vports)
5734 return 1;
5735
5736 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
5737 shost = lpfc_shost_from_vport(vports[i]);
5738 spin_lock_irq(shost->host_lock);
5739 /*
5740 * IF the CVL_RCVD bit is not set then we have sent the
5741 * flogi.
5742 * If dev_loss fires while we are waiting we do not want to
5743 * unreg the fcf.
5744 */
5745 if (!(vports[i]->fc_flag & FC_VPORT_CVL_RCVD)) {
5746 spin_unlock_irq(shost->host_lock);
5747 ret = 1;
5748 goto out;
5749 }
5750 list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) {
5751 if (NLP_CHK_NODE_ACT(ndlp) && ndlp->rport &&
5752 (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) {
5753 ret = 1;
5754 spin_unlock_irq(shost->host_lock);
5755 goto out;
5756 } else if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
5757 ret = 1;
5758 lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
5759 "2624 RPI %x DID %x flag %x "
5760 "still logged in\n",
5761 ndlp->nlp_rpi, ndlp->nlp_DID,
5762 ndlp->nlp_flag);
5763 }
5764 }
5765 spin_unlock_irq(shost->host_lock);
5766 }
5767out:
5768 lpfc_destroy_vport_work_array(phba, vports);
5769 return ret;
5770}
5771
5772/**
5773 * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi.
5774 * @phba: Pointer to hba context object.
5775 * @mboxq: Pointer to mailbox object.
5776 *
5777 * This function frees memory associated with the mailbox command.
5778 */
5779void
5780lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
5781{
5782 struct lpfc_vport *vport = mboxq->vport;
5783 struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
5784
5785 if (mboxq->u.mb.mbxStatus) {
5786 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
5787 "2555 UNREG_VFI mbxStatus error x%x "
5788 "HBA state x%x\n",
5789 mboxq->u.mb.mbxStatus, vport->port_state);
5790 }
5791 spin_lock_irq(shost->host_lock);
5792 phba->pport->fc_flag &= ~FC_VFI_REGISTERED;
5793 spin_unlock_irq(shost->host_lock);
5794 mempool_free(mboxq, phba->mbox_mem_pool);
5795 return;
5796}
5797
5798/**
5799 * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi.
5800 * @phba: Pointer to hba context object.
5801 * @mboxq: Pointer to mailbox object.
5802 *
5803 * This function frees memory associated with the mailbox command.
5804 */
5805static void
5806lpfc_unregister_fcfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
5807{
5808 struct lpfc_vport *vport = mboxq->vport;
5809
5810 if (mboxq->u.mb.mbxStatus) {
5811 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
5812 "2550 UNREG_FCFI mbxStatus error x%x "
5813 "HBA state x%x\n",
5814 mboxq->u.mb.mbxStatus, vport->port_state);
5815 }
5816 mempool_free(mboxq, phba->mbox_mem_pool);
5817 return;
5818}
5819
5820/**
5821 * lpfc_unregister_fcf_prep - Unregister fcf record preparation
5822 * @phba: Pointer to hba context object.
5823 *
5824 * This function prepare the HBA for unregistering the currently registered
5825 * FCF from the HBA. It performs unregistering, in order, RPIs, VPIs, and
5826 * VFIs.
5827 */
5828int
5829lpfc_unregister_fcf_prep(struct lpfc_hba *phba)
5830{
5831 struct lpfc_vport **vports;
5832 struct lpfc_nodelist *ndlp;
5833 struct Scsi_Host *shost;
5834 int i, rc;
5835
5836 /* Unregister RPIs */
5837 if (lpfc_fcf_inuse(phba))
5838 lpfc_unreg_hba_rpis(phba);
5839
5840 /* At this point, all discovery is aborted */
5841 phba->pport->port_state = LPFC_VPORT_UNKNOWN;
5842
5843 /* Unregister VPIs */
5844 vports = lpfc_create_vport_work_array(phba);
5845 if (vports && (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
5846 for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
5847 /* Stop FLOGI/FDISC retries */
5848 ndlp = lpfc_findnode_did(vports[i], Fabric_DID);
5849 if (ndlp)
5850 lpfc_cancel_retry_delay_tmo(vports[i], ndlp);
5851 lpfc_cleanup_pending_mbox(vports[i]);
5852 if (phba->sli_rev == LPFC_SLI_REV4)
5853 lpfc_sli4_unreg_all_rpis(vports[i]);
5854 lpfc_mbx_unreg_vpi(vports[i]);
5855 shost = lpfc_shost_from_vport(vports[i]);
5856 spin_lock_irq(shost->host_lock);
5857 vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
5858 vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
5859 spin_unlock_irq(shost->host_lock);
5860 }
5861 lpfc_destroy_vport_work_array(phba, vports);
5862
5863 /* Cleanup any outstanding ELS commands */
5864 lpfc_els_flush_all_cmd(phba);
5865
5866 /* Unregister the physical port VFI */
5867 rc = lpfc_issue_unreg_vfi(phba->pport);
5868 return rc;
5869}
5870
5871/**
5872 * lpfc_sli4_unregister_fcf - Unregister currently registered FCF record
5873 * @phba: Pointer to hba context object.
5874 *
5875 * This function issues synchronous unregister FCF mailbox command to HBA to
5876 * unregister the currently registered FCF record. The driver does not reset
5877 * the driver FCF usage state flags.
5878 *
5879 * Return 0 if successfully issued, none-zero otherwise.
5880 */
5881int
5882lpfc_sli4_unregister_fcf(struct lpfc_hba *phba)
5883{
5884 LPFC_MBOXQ_t *mbox;
5885 int rc;
5886
5887 mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
5888 if (!mbox) {
5889 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
5890 "2551 UNREG_FCFI mbox allocation failed"
5891 "HBA state x%x\n", phba->pport->port_state);
5892 return -ENOMEM;
5893 }
5894 lpfc_unreg_fcfi(mbox, phba->fcf.fcfi);
5895 mbox->vport = phba->pport;
5896 mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl;
5897 rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
5898
5899 if (rc == MBX_NOT_FINISHED) {
5900 lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
5901 "2552 Unregister FCFI command failed rc x%x "
5902 "HBA state x%x\n",
5903 rc, phba->pport->port_state);
5904 return -EINVAL;
5905 }
5906 return 0;
5907}
5908
5909/**
5910 * lpfc_unregister_fcf_rescan - Unregister currently registered fcf and rescan
5911 * @phba: Pointer to hba context object.
5912 *
5913 * This function unregisters the currently reigstered FCF. This function
5914 * also tries to find another FCF for discovery by rescan the HBA FCF table.
5915 */
5916void
5917lpfc_unregister_fcf_rescan(struct lpfc_hba *phba)
5918{
5919 int rc;
5920
5921 /* Preparation for unregistering fcf */
5922 rc = lpfc_unregister_fcf_prep(phba);
5923 if (rc) {
5924 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
5925 "2748 Failed to prepare for unregistering "
5926 "HBA's FCF record: rc=%d\n", rc);
5927 return;
5928 }
5929
5930 /* Now, unregister FCF record and reset HBA FCF state */
5931 rc = lpfc_sli4_unregister_fcf(phba);
5932 if (rc)
5933 return;
5934 /* Reset HBA FCF states after successful unregister FCF */
5935 phba->fcf.fcf_flag = 0;
5936 phba->fcf.current_rec.flag = 0;
5937
5938 /*
5939 * If driver is not unloading, check if there is any other
5940 * FCF record that can be used for discovery.
5941 */
5942 if ((phba->pport->load_flag & FC_UNLOADING) ||
5943 (phba->link_state < LPFC_LINK_UP))
5944 return;
5945
5946 /* This is considered as the initial FCF discovery scan */
5947 spin_lock_irq(&phba->hbalock);
5948 phba->fcf.fcf_flag |= FCF_INIT_DISC;
5949 spin_unlock_irq(&phba->hbalock);
5950
5951 /* Reset FCF roundrobin bmask for new discovery */
5952 lpfc_sli4_clear_fcf_rr_bmask(phba);
5953
5954 rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST);
5955
5956 if (rc) {
5957 spin_lock_irq(&phba->hbalock);
5958 phba->fcf.fcf_flag &= ~FCF_INIT_DISC;
5959 spin_unlock_irq(&phba->hbalock);
5960 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
5961 "2553 lpfc_unregister_unused_fcf failed "
5962 "to read FCF record HBA state x%x\n",
5963 phba->pport->port_state);
5964 }
5965}
5966
5967/**
5968 * lpfc_unregister_fcf - Unregister the currently registered fcf record
5969 * @phba: Pointer to hba context object.
5970 *
5971 * This function just unregisters the currently reigstered FCF. It does not
5972 * try to find another FCF for discovery.
5973 */
5974void
5975lpfc_unregister_fcf(struct lpfc_hba *phba)
5976{
5977 int rc;
5978
5979 /* Preparation for unregistering fcf */
5980 rc = lpfc_unregister_fcf_prep(phba);
5981 if (rc) {
5982 lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
5983 "2749 Failed to prepare for unregistering "
5984 "HBA's FCF record: rc=%d\n", rc);
5985 return;
5986 }
5987
5988 /* Now, unregister FCF record and reset HBA FCF state */
5989 rc = lpfc_sli4_unregister_fcf(phba);
5990 if (rc)
5991 return;
5992 /* Set proper HBA FCF states after successful unregister FCF */
5993 spin_lock_irq(&phba->hbalock);
5994 phba->fcf.fcf_flag &= ~FCF_REGISTERED;
5995 spin_unlock_irq(&phba->hbalock);
5996}
5997
5998/**
5999 * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected.
6000 * @phba: Pointer to hba context object.
6001 *
6002 * This function check if there are any connected remote port for the FCF and
6003 * if all the devices are disconnected, this function unregister FCFI.
6004 * This function also tries to use another FCF for discovery.
6005 */
6006void
6007lpfc_unregister_unused_fcf(struct lpfc_hba *phba)
6008{
6009 /*
6010 * If HBA is not running in FIP mode, if HBA does not support
6011 * FCoE, if FCF discovery is ongoing, or if FCF has not been
6012 * registered, do nothing.
6013 */
6014 spin_lock_irq(&phba->hbalock);
6015 if (!(phba->hba_flag & HBA_FCOE_MODE) ||
6016 !(phba->fcf.fcf_flag & FCF_REGISTERED) ||
6017 !(phba->hba_flag & HBA_FIP_SUPPORT) ||
6018 (phba->fcf.fcf_flag & FCF_DISCOVERY) ||
6019 (phba->pport->port_state == LPFC_FLOGI)) {
6020 spin_unlock_irq(&phba->hbalock);
6021 return;
6022 }
6023 spin_unlock_irq(&phba->hbalock);
6024
6025 if (lpfc_fcf_inuse(phba))
6026 return;
6027
6028 lpfc_unregister_fcf_rescan(phba);
6029}
6030
6031/**
6032 * lpfc_read_fcf_conn_tbl - Create driver FCF connection table.
6033 * @phba: Pointer to hba context object.
6034 * @buff: Buffer containing the FCF connection table as in the config
6035 * region.
6036 * This function create driver data structure for the FCF connection
6037 * record table read from config region 23.
6038 */
6039static void
6040lpfc_read_fcf_conn_tbl(struct lpfc_hba *phba,
6041 uint8_t *buff)
6042{
6043 struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
6044 struct lpfc_fcf_conn_hdr *conn_hdr;
6045 struct lpfc_fcf_conn_rec *conn_rec;
6046 uint32_t record_count;
6047 int i;
6048
6049 /* Free the current connect table */
6050 list_for_each_entry_safe(conn_entry, next_conn_entry,
6051 &phba->fcf_conn_rec_list, list) {
6052 list_del_init(&conn_entry->list);
6053 kfree(conn_entry);
6054 }
6055
6056 conn_hdr = (struct lpfc_fcf_conn_hdr *) buff;
6057 record_count = conn_hdr->length * sizeof(uint32_t)/
6058 sizeof(struct lpfc_fcf_conn_rec);
6059
6060 conn_rec = (struct lpfc_fcf_conn_rec *)
6061 (buff + sizeof(struct lpfc_fcf_conn_hdr));
6062
6063 for (i = 0; i < record_count; i++) {
6064 if (!(conn_rec[i].flags & FCFCNCT_VALID))
6065 continue;
6066 conn_entry = kzalloc(sizeof(struct lpfc_fcf_conn_entry),
6067 GFP_KERNEL);
6068 if (!conn_entry) {
6069 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
6070 "2566 Failed to allocate connection"
6071 " table entry\n");
6072 return;
6073 }
6074
6075 memcpy(&conn_entry->conn_rec, &conn_rec[i],
6076 sizeof(struct lpfc_fcf_conn_rec));
6077 conn_entry->conn_rec.vlan_tag =
6078 le16_to_cpu(conn_entry->conn_rec.vlan_tag) & 0xFFF;
6079 conn_entry->conn_rec.flags =
6080 le16_to_cpu(conn_entry->conn_rec.flags);
6081 list_add_tail(&conn_entry->list,
6082 &phba->fcf_conn_rec_list);
6083 }
6084}
6085
6086/**
6087 * lpfc_read_fcoe_param - Read FCoe parameters from conf region..
6088 * @phba: Pointer to hba context object.
6089 * @buff: Buffer containing the FCoE parameter data structure.
6090 *
6091 * This function update driver data structure with config
6092 * parameters read from config region 23.
6093 */
6094static void
6095lpfc_read_fcoe_param(struct lpfc_hba *phba,
6096 uint8_t *buff)
6097{
6098 struct lpfc_fip_param_hdr *fcoe_param_hdr;
6099 struct lpfc_fcoe_params *fcoe_param;
6100
6101 fcoe_param_hdr = (struct lpfc_fip_param_hdr *)
6102 buff;
6103 fcoe_param = (struct lpfc_fcoe_params *)
6104 (buff + sizeof(struct lpfc_fip_param_hdr));
6105
6106 if ((fcoe_param_hdr->parm_version != FIPP_VERSION) ||
6107 (fcoe_param_hdr->length != FCOE_PARAM_LENGTH))
6108 return;
6109
6110 if (fcoe_param_hdr->parm_flags & FIPP_VLAN_VALID) {
6111 phba->valid_vlan = 1;
6112 phba->vlan_id = le16_to_cpu(fcoe_param->vlan_tag) &
6113 0xFFF;
6114 }
6115
6116 phba->fc_map[0] = fcoe_param->fc_map[0];
6117 phba->fc_map[1] = fcoe_param->fc_map[1];
6118 phba->fc_map[2] = fcoe_param->fc_map[2];
6119 return;
6120}
6121
6122/**
6123 * lpfc_get_rec_conf23 - Get a record type in config region data.
6124 * @buff: Buffer containing config region 23 data.
6125 * @size: Size of the data buffer.
6126 * @rec_type: Record type to be searched.
6127 *
6128 * This function searches config region data to find the beginning
6129 * of the record specified by record_type. If record found, this
6130 * function return pointer to the record else return NULL.
6131 */
6132static uint8_t *
6133lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type)
6134{
6135 uint32_t offset = 0, rec_length;
6136
6137 if ((buff[0] == LPFC_REGION23_LAST_REC) ||
6138 (size < sizeof(uint32_t)))
6139 return NULL;
6140
6141 rec_length = buff[offset + 1];
6142
6143 /*
6144 * One TLV record has one word header and number of data words
6145 * specified in the rec_length field of the record header.
6146 */
6147 while ((offset + rec_length * sizeof(uint32_t) + sizeof(uint32_t))
6148 <= size) {
6149 if (buff[offset] == rec_type)
6150 return &buff[offset];
6151
6152 if (buff[offset] == LPFC_REGION23_LAST_REC)
6153 return NULL;
6154
6155 offset += rec_length * sizeof(uint32_t) + sizeof(uint32_t);
6156 rec_length = buff[offset + 1];
6157 }
6158 return NULL;
6159}
6160
6161/**
6162 * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23.
6163 * @phba: Pointer to lpfc_hba data structure.
6164 * @buff: Buffer containing config region 23 data.
6165 * @size: Size of the data buffer.
6166 *
6167 * This function parses the FCoE config parameters in config region 23 and
6168 * populate driver data structure with the parameters.
6169 */
6170void
6171lpfc_parse_fcoe_conf(struct lpfc_hba *phba,
6172 uint8_t *buff,
6173 uint32_t size)
6174{
6175 uint32_t offset = 0, rec_length;
6176 uint8_t *rec_ptr;
6177
6178 /*
6179 * If data size is less than 2 words signature and version cannot be
6180 * verified.
6181 */
6182 if (size < 2*sizeof(uint32_t))
6183 return;
6184
6185 /* Check the region signature first */
6186 if (memcmp(buff, LPFC_REGION23_SIGNATURE, 4)) {
6187 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
6188 "2567 Config region 23 has bad signature\n");
6189 return;
6190 }
6191
6192 offset += 4;
6193
6194 /* Check the data structure version */
6195 if (buff[offset] != LPFC_REGION23_VERSION) {
6196 lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
6197 "2568 Config region 23 has bad version\n");
6198 return;
6199 }
6200 offset += 4;
6201
6202 rec_length = buff[offset + 1];
6203
6204 /* Read FCoE param record */
6205 rec_ptr = lpfc_get_rec_conf23(&buff[offset],
6206 size - offset, FCOE_PARAM_TYPE);
6207 if (rec_ptr)
6208 lpfc_read_fcoe_param(phba, rec_ptr);
6209
6210 /* Read FCF connection table */
6211 rec_ptr = lpfc_get_rec_conf23(&buff[offset],
6212 size - offset, FCOE_CONN_TBL_TYPE);
6213 if (rec_ptr)
6214 lpfc_read_fcf_conn_tbl(phba, rec_ptr);
6215
6216}
This page took 0.053803 seconds and 5 git commands to generate.