| 1 | /* tc-tic4x.c -- Assemble for the Texas Instruments TMS320C[34]x. |
| 2 | Copyright (C) 1997,1998, 2002, 2003, 2005, 2006, 2007, 2008 |
| 3 | Free Software Foundation. Inc. |
| 4 | |
| 5 | Contributed by Michael P. Hayes (m.hayes@elec.canterbury.ac.nz) |
| 6 | |
| 7 | This file is part of GAS, the GNU Assembler. |
| 8 | |
| 9 | GAS is free software; you can redistribute it and/or modify |
| 10 | it under the terms of the GNU General Public License as published by |
| 11 | the Free Software Foundation; either version 3, or (at your option) |
| 12 | any later version. |
| 13 | |
| 14 | GAS is distributed in the hope that it will be useful, |
| 15 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | GNU General Public License for more details. |
| 18 | |
| 19 | You should have received a copy of the GNU General Public License |
| 20 | along with GAS; see the file COPYING. If not, write to |
| 21 | the Free Software Foundation, 51 Franklin Street - Fifth Floor, |
| 22 | Boston, MA 02110-1301, USA. */ |
| 23 | /* |
| 24 | TODOs: |
| 25 | ------ |
| 26 | |
| 27 | o .align cannot handle fill-data-width larger than 0xFF/8-bits. It |
| 28 | should be possible to define a 32-bits pattern. |
| 29 | |
| 30 | o .align fills all section with NOP's when used regardless if has |
| 31 | been used in .text or .data. (However the .align is primarily |
| 32 | intended used in .text sections. If you require something else, |
| 33 | use .align <size>,0x00) |
| 34 | |
| 35 | o .align: Implement a 'bu' insn if the number of nop's exceeds 4 |
| 36 | within the align frag. if(fragsize>4words) insert bu fragend+1 |
| 37 | first. |
| 38 | |
| 39 | o .usect if has symbol on previous line not implemented |
| 40 | |
| 41 | o .sym, .eos, .stag, .etag, .member not implemented |
| 42 | |
| 43 | o Evaluation of constant floating point expressions (expr.c needs |
| 44 | work!) |
| 45 | |
| 46 | o Support 'abc' constants (that is 0x616263) |
| 47 | */ |
| 48 | |
| 49 | #include "safe-ctype.h" |
| 50 | #include "as.h" |
| 51 | #include "opcode/tic4x.h" |
| 52 | #include "subsegs.h" |
| 53 | #include "obstack.h" |
| 54 | |
| 55 | /* OK, we accept a syntax similar to the other well known C30 |
| 56 | assembly tools. With TIC4X_ALT_SYNTAX defined we are more |
| 57 | flexible, allowing a more Unix-like syntax: `%' in front of |
| 58 | register names, `#' in front of immediate constants, and |
| 59 | not requiring `@' in front of direct addresses. */ |
| 60 | |
| 61 | #define TIC4X_ALT_SYNTAX |
| 62 | |
| 63 | /* Equal to MAX_PRECISION in atof-ieee.c. */ |
| 64 | #define MAX_LITTLENUMS 6 /* (12 bytes) */ |
| 65 | |
| 66 | /* Handle of the inst mnemonic hash table. */ |
| 67 | static struct hash_control *tic4x_op_hash = NULL; |
| 68 | |
| 69 | /* Handle asg pseudo. */ |
| 70 | static struct hash_control *tic4x_asg_hash = NULL; |
| 71 | |
| 72 | static unsigned int tic4x_cpu = 0; /* Default to TMS320C40. */ |
| 73 | static unsigned int tic4x_revision = 0; /* CPU revision */ |
| 74 | static unsigned int tic4x_idle2 = 0; /* Idle2 support */ |
| 75 | static unsigned int tic4x_lowpower = 0; /* Lowpower support */ |
| 76 | static unsigned int tic4x_enhanced = 0; /* Enhanced opcode support */ |
| 77 | static unsigned int tic4x_big_model = 0; /* Default to small memory model. */ |
| 78 | static unsigned int tic4x_reg_args = 0; /* Default to args passed on stack. */ |
| 79 | static unsigned long tic4x_oplevel = 0; /* Opcode level */ |
| 80 | |
| 81 | #define OPTION_CPU 'm' |
| 82 | #define OPTION_BIG (OPTION_MD_BASE + 1) |
| 83 | #define OPTION_SMALL (OPTION_MD_BASE + 2) |
| 84 | #define OPTION_MEMPARM (OPTION_MD_BASE + 3) |
| 85 | #define OPTION_REGPARM (OPTION_MD_BASE + 4) |
| 86 | #define OPTION_IDLE2 (OPTION_MD_BASE + 5) |
| 87 | #define OPTION_LOWPOWER (OPTION_MD_BASE + 6) |
| 88 | #define OPTION_ENHANCED (OPTION_MD_BASE + 7) |
| 89 | #define OPTION_REV (OPTION_MD_BASE + 8) |
| 90 | |
| 91 | CONST char *md_shortopts = "bm:prs"; |
| 92 | struct option md_longopts[] = |
| 93 | { |
| 94 | { "mcpu", required_argument, NULL, OPTION_CPU }, |
| 95 | { "mdsp", required_argument, NULL, OPTION_CPU }, |
| 96 | { "mbig", no_argument, NULL, OPTION_BIG }, |
| 97 | { "msmall", no_argument, NULL, OPTION_SMALL }, |
| 98 | { "mmemparm", no_argument, NULL, OPTION_MEMPARM }, |
| 99 | { "mregparm", no_argument, NULL, OPTION_REGPARM }, |
| 100 | { "midle2", no_argument, NULL, OPTION_IDLE2 }, |
| 101 | { "mlowpower", no_argument, NULL, OPTION_LOWPOWER }, |
| 102 | { "menhanced", no_argument, NULL, OPTION_ENHANCED }, |
| 103 | { "mrev", required_argument, NULL, OPTION_REV }, |
| 104 | { NULL, no_argument, NULL, 0 } |
| 105 | }; |
| 106 | |
| 107 | size_t md_longopts_size = sizeof (md_longopts); |
| 108 | |
| 109 | |
| 110 | typedef enum |
| 111 | { |
| 112 | M_UNKNOWN, M_IMMED, M_DIRECT, M_REGISTER, M_INDIRECT, |
| 113 | M_IMMED_F, M_PARALLEL, M_HI |
| 114 | } |
| 115 | tic4x_addr_mode_t; |
| 116 | |
| 117 | typedef struct tic4x_operand |
| 118 | { |
| 119 | tic4x_addr_mode_t mode; /* Addressing mode. */ |
| 120 | expressionS expr; /* Expression. */ |
| 121 | int disp; /* Displacement for indirect addressing. */ |
| 122 | int aregno; /* Aux. register number. */ |
| 123 | LITTLENUM_TYPE fwords[MAX_LITTLENUMS]; /* Float immed. number. */ |
| 124 | } |
| 125 | tic4x_operand_t; |
| 126 | |
| 127 | typedef struct tic4x_insn |
| 128 | { |
| 129 | char name[TIC4X_NAME_MAX]; /* Mnemonic of instruction. */ |
| 130 | unsigned int in_use; /* True if in_use. */ |
| 131 | unsigned int parallel; /* True if parallel instruction. */ |
| 132 | unsigned int nchars; /* This is always 4 for the C30. */ |
| 133 | unsigned long opcode; /* Opcode number. */ |
| 134 | expressionS exp; /* Expression required for relocation. */ |
| 135 | int reloc; /* Relocation type required. */ |
| 136 | int pcrel; /* True if relocation PC relative. */ |
| 137 | char *pname; /* Name of instruction in parallel. */ |
| 138 | unsigned int num_operands; /* Number of operands in total. */ |
| 139 | tic4x_inst_t *inst; /* Pointer to first template. */ |
| 140 | tic4x_operand_t operands[TIC4X_OPERANDS_MAX]; |
| 141 | } |
| 142 | tic4x_insn_t; |
| 143 | |
| 144 | static tic4x_insn_t the_insn; /* Info about our instruction. */ |
| 145 | static tic4x_insn_t *insn = &the_insn; |
| 146 | |
| 147 | static int tic4x_gen_to_words |
| 148 | PARAMS ((FLONUM_TYPE, LITTLENUM_TYPE *, int )); |
| 149 | static char *tic4x_atof |
| 150 | PARAMS ((char *, char, LITTLENUM_TYPE * )); |
| 151 | static void tic4x_insert_reg |
| 152 | PARAMS ((char *, int )); |
| 153 | static void tic4x_insert_sym |
| 154 | PARAMS ((char *, int )); |
| 155 | static char *tic4x_expression |
| 156 | PARAMS ((char *, expressionS *)); |
| 157 | static char *tic4x_expression_abs |
| 158 | PARAMS ((char *, offsetT *)); |
| 159 | static void tic4x_emit_char |
| 160 | PARAMS ((char, int)); |
| 161 | static void tic4x_seg_alloc |
| 162 | PARAMS ((char *, segT, int, symbolS *)); |
| 163 | static void tic4x_asg |
| 164 | PARAMS ((int)); |
| 165 | static void tic4x_bss |
| 166 | PARAMS ((int)); |
| 167 | static void tic4x_globl |
| 168 | PARAMS ((int)); |
| 169 | static void tic4x_cons |
| 170 | PARAMS ((int)); |
| 171 | static void tic4x_stringer |
| 172 | PARAMS ((int)); |
| 173 | static void tic4x_eval |
| 174 | PARAMS ((int)); |
| 175 | static void tic4x_newblock |
| 176 | PARAMS ((int)); |
| 177 | static void tic4x_sect |
| 178 | PARAMS ((int)); |
| 179 | static void tic4x_set |
| 180 | PARAMS ((int)); |
| 181 | static void tic4x_usect |
| 182 | PARAMS ((int)); |
| 183 | static void tic4x_version |
| 184 | PARAMS ((int)); |
| 185 | static void tic4x_init_regtable |
| 186 | PARAMS ((void)); |
| 187 | static void tic4x_init_symbols |
| 188 | PARAMS ((void)); |
| 189 | static int tic4x_inst_insert (const tic4x_inst_t *); |
| 190 | static tic4x_inst_t *tic4x_inst_make |
| 191 | PARAMS ((char *, unsigned long, char *)); |
| 192 | static int tic4x_inst_add (const tic4x_inst_t *); |
| 193 | void tic4x_end |
| 194 | PARAMS ((void)); |
| 195 | static int tic4x_indirect_parse |
| 196 | PARAMS ((tic4x_operand_t *, const tic4x_indirect_t *)); |
| 197 | static char *tic4x_operand_parse |
| 198 | PARAMS ((char *, tic4x_operand_t *)); |
| 199 | static int tic4x_operands_match |
| 200 | PARAMS ((tic4x_inst_t *, tic4x_insn_t *, int)); |
| 201 | static void tic4x_insn_check |
| 202 | PARAMS ((tic4x_insn_t *)); |
| 203 | static void tic4x_insn_output |
| 204 | PARAMS ((tic4x_insn_t *)); |
| 205 | static int tic4x_operands_parse |
| 206 | PARAMS ((char *, tic4x_operand_t *, int )); |
| 207 | void tic4x_cleanup |
| 208 | PARAMS ((void)); |
| 209 | int tic4x_unrecognized_line |
| 210 | PARAMS ((int)); |
| 211 | static int tic4x_pc_offset |
| 212 | PARAMS ((unsigned int)); |
| 213 | int tic4x_do_align |
| 214 | PARAMS ((int, const char *, int, int)); |
| 215 | void tic4x_start_line |
| 216 | PARAMS ((void)); |
| 217 | arelent *tc_gen_reloc |
| 218 | PARAMS ((asection *, fixS *)); |
| 219 | |
| 220 | |
| 221 | const pseudo_typeS |
| 222 | md_pseudo_table[] = |
| 223 | { |
| 224 | {"align", s_align_bytes, 32}, |
| 225 | {"ascii", tic4x_stringer, 1}, |
| 226 | {"asciz", tic4x_stringer, 0}, |
| 227 | {"asg", tic4x_asg, 0}, |
| 228 | {"block", s_space, 4}, |
| 229 | {"byte", tic4x_cons, 1}, |
| 230 | {"bss", tic4x_bss, 0}, |
| 231 | {"copy", s_include, 0}, |
| 232 | {"def", tic4x_globl, 0}, |
| 233 | {"equ", tic4x_set, 0}, |
| 234 | {"eval", tic4x_eval, 0}, |
| 235 | {"global", tic4x_globl, 0}, |
| 236 | {"globl", tic4x_globl, 0}, |
| 237 | {"hword", tic4x_cons, 2}, |
| 238 | {"ieee", float_cons, 'i'}, |
| 239 | {"int", tic4x_cons, 4}, /* .int allocates 4 bytes. */ |
| 240 | {"ldouble", float_cons, 'e'}, |
| 241 | {"newblock", tic4x_newblock, 0}, |
| 242 | {"ref", s_ignore, 0}, /* All undefined treated as external. */ |
| 243 | {"set", tic4x_set, 0}, |
| 244 | {"sect", tic4x_sect, 1}, /* Define named section. */ |
| 245 | {"space", s_space, 4}, |
| 246 | {"string", tic4x_stringer, 0}, |
| 247 | {"usect", tic4x_usect, 0}, /* Reserve space in uninit. named sect. */ |
| 248 | {"version", tic4x_version, 0}, |
| 249 | {"word", tic4x_cons, 4}, /* .word allocates 4 bytes. */ |
| 250 | {"xdef", tic4x_globl, 0}, |
| 251 | {NULL, 0, 0}, |
| 252 | }; |
| 253 | |
| 254 | int md_short_jump_size = 4; |
| 255 | int md_long_jump_size = 4; |
| 256 | |
| 257 | /* This array holds the chars that always start a comment. If the |
| 258 | pre-processor is disabled, these aren't very useful. */ |
| 259 | #ifdef TIC4X_ALT_SYNTAX |
| 260 | const char comment_chars[] = ";!"; |
| 261 | #else |
| 262 | const char comment_chars[] = ";"; |
| 263 | #endif |
| 264 | |
| 265 | /* This array holds the chars that only start a comment at the beginning of |
| 266 | a line. If the line seems to have the form '# 123 filename' |
| 267 | .line and .file directives will appear in the pre-processed output. |
| 268 | Note that input_file.c hand checks for '#' at the beginning of the |
| 269 | first line of the input file. This is because the compiler outputs |
| 270 | #NO_APP at the beginning of its output. |
| 271 | Also note that comments like this one will always work. */ |
| 272 | const char line_comment_chars[] = "#*"; |
| 273 | |
| 274 | /* We needed an unused char for line separation to work around the |
| 275 | lack of macros, using sed and such. */ |
| 276 | const char line_separator_chars[] = "&"; |
| 277 | |
| 278 | /* Chars that can be used to separate mant from exp in floating point nums. */ |
| 279 | const char EXP_CHARS[] = "eE"; |
| 280 | |
| 281 | /* Chars that mean this number is a floating point constant. */ |
| 282 | /* As in 0f12.456 */ |
| 283 | /* or 0d1.2345e12 */ |
| 284 | const char FLT_CHARS[] = "fFilsS"; |
| 285 | |
| 286 | /* Also be aware that MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT may have to be |
| 287 | changed in read.c. Ideally it shouldn't have to know about it at |
| 288 | all, but nothing is ideal around here. */ |
| 289 | |
| 290 | /* Flonums returned here. */ |
| 291 | extern FLONUM_TYPE generic_floating_point_number; |
| 292 | |
| 293 | /* Precision in LittleNums. */ |
| 294 | #define MAX_PRECISION (4) /* Its a bit overkill for us, but the code |
| 295 | requires it... */ |
| 296 | #define S_PRECISION (1) /* Short float constants 16-bit. */ |
| 297 | #define F_PRECISION (2) /* Float and double types 32-bit. */ |
| 298 | #define E_PRECISION (4) /* Extended precision, 64-bit (real 40-bit). */ |
| 299 | #define GUARD (2) |
| 300 | |
| 301 | /* Turn generic_floating_point_number into a real short/float/double. */ |
| 302 | static int |
| 303 | tic4x_gen_to_words (flonum, words, precision) |
| 304 | FLONUM_TYPE flonum; |
| 305 | LITTLENUM_TYPE *words; |
| 306 | int precision; |
| 307 | { |
| 308 | int return_value = 0; |
| 309 | LITTLENUM_TYPE *p; /* Littlenum pointer. */ |
| 310 | int mantissa_bits; /* Bits in mantissa field. */ |
| 311 | int exponent_bits; /* Bits in exponent field. */ |
| 312 | int exponent; |
| 313 | unsigned int sone; /* Scaled one. */ |
| 314 | unsigned int sfract; /* Scaled fraction. */ |
| 315 | unsigned int smant; /* Scaled mantissa. */ |
| 316 | unsigned int tmp; |
| 317 | unsigned int mover; /* Mantissa overflow bits */ |
| 318 | unsigned int rbit; /* Round bit. */ |
| 319 | int shift; /* Shift count. */ |
| 320 | |
| 321 | /* NOTE: Svein Seldal <Svein@dev.seldal.com> |
| 322 | The code in this function is altered slightly to support floats |
| 323 | with 31-bits mantissas, thus the documentation below may be a |
| 324 | little bit inaccurate. |
| 325 | |
| 326 | By Michael P. Hayes <m.hayes@elec.canterbury.ac.nz> |
| 327 | Here is how a generic floating point number is stored using |
| 328 | flonums (an extension of bignums) where p is a pointer to an |
| 329 | array of LITTLENUMs. |
| 330 | |
| 331 | For example 2e-3 is stored with exp = -4 and |
| 332 | bits[0] = 0x0000 |
| 333 | bits[1] = 0x0000 |
| 334 | bits[2] = 0x4fde |
| 335 | bits[3] = 0x978d |
| 336 | bits[4] = 0x126e |
| 337 | bits[5] = 0x0083 |
| 338 | with low = &bits[2], high = &bits[5], and leader = &bits[5]. |
| 339 | |
| 340 | This number can be written as |
| 341 | 0x0083126e978d4fde.00000000 * 65536**-4 or |
| 342 | 0x0.0083126e978d4fde * 65536**0 or |
| 343 | 0x0.83126e978d4fde * 2**-8 = 2e-3 |
| 344 | |
| 345 | Note that low points to the 65536**0 littlenum (bits[2]) and |
| 346 | leader points to the most significant non-zero littlenum |
| 347 | (bits[5]). |
| 348 | |
| 349 | TMS320C3X floating point numbers are a bit of a strange beast. |
| 350 | The 32-bit flavour has the 8 MSBs representing the exponent in |
| 351 | twos complement format (-128 to +127). There is then a sign bit |
| 352 | followed by 23 bits of mantissa. The mantissa is expressed in |
| 353 | twos complement format with the binary point after the most |
| 354 | significant non sign bit. The bit after the binary point is |
| 355 | suppressed since it is the complement of the sign bit. The |
| 356 | effective mantissa is thus 24 bits. Zero is represented by an |
| 357 | exponent of -128. |
| 358 | |
| 359 | The 16-bit flavour has the 4 MSBs representing the exponent in |
| 360 | twos complement format (-8 to +7). There is then a sign bit |
| 361 | followed by 11 bits of mantissa. The mantissa is expressed in |
| 362 | twos complement format with the binary point after the most |
| 363 | significant non sign bit. The bit after the binary point is |
| 364 | suppressed since it is the complement of the sign bit. The |
| 365 | effective mantissa is thus 12 bits. Zero is represented by an |
| 366 | exponent of -8. For example, |
| 367 | |
| 368 | number norm mant m x e s i fraction f |
| 369 | +0.500 => 1.00000000000 -1 -1 0 1 .00000000000 (1 + 0) * 2^(-1) |
| 370 | +0.999 => 1.11111111111 -1 -1 0 1 .11111111111 (1 + 0.99) * 2^(-1) |
| 371 | +1.000 => 1.00000000000 0 0 0 1 .00000000000 (1 + 0) * 2^(0) |
| 372 | +1.500 => 1.10000000000 0 0 0 1 .10000000000 (1 + 0.5) * 2^(0) |
| 373 | +1.999 => 1.11111111111 0 0 0 1 .11111111111 (1 + 0.9) * 2^(0) |
| 374 | +2.000 => 1.00000000000 1 1 0 1 .00000000000 (1 + 0) * 2^(1) |
| 375 | +4.000 => 1.00000000000 2 2 0 1 .00000000000 (1 + 0) * 2^(2) |
| 376 | -0.500 => 1.00000000000 -1 -1 1 0 .10000000000 (-2 + 0) * 2^(-2) |
| 377 | -1.000 => 1.00000000000 0 -1 1 0 .00000000000 (-2 + 0) * 2^(-1) |
| 378 | -1.500 => 1.10000000000 0 0 1 0 .10000000000 (-2 + 0.5) * 2^(0) |
| 379 | -1.999 => 1.11111111111 0 0 1 0 .00000000001 (-2 + 0.11) * 2^(0) |
| 380 | -2.000 => 1.00000000000 1 1 1 0 .00000000000 (-2 + 0) * 2^(0) |
| 381 | -4.000 => 1.00000000000 2 1 1 0 .00000000000 (-2 + 0) * 2^(1) |
| 382 | |
| 383 | where e is the exponent, s is the sign bit, i is the implied bit, |
| 384 | and f is the fraction stored in the mantissa field. |
| 385 | |
| 386 | num = (1 + f) * 2^x = m * 2^e if s = 0 |
| 387 | num = (-2 + f) * 2^x = -m * 2^e if s = 1 |
| 388 | where 0 <= f < 1.0 and 1.0 <= m < 2.0 |
| 389 | |
| 390 | The fraction (f) and exponent (e) fields for the TMS320C3X format |
| 391 | can be derived from the normalised mantissa (m) and exponent (x) using: |
| 392 | |
| 393 | f = m - 1, e = x if s = 0 |
| 394 | f = 2 - m, e = x if s = 1 and m != 1.0 |
| 395 | f = 0, e = x - 1 if s = 1 and m = 1.0 |
| 396 | f = 0, e = -8 if m = 0 |
| 397 | |
| 398 | |
| 399 | OK, the other issue we have to consider is rounding since the |
| 400 | mantissa has a much higher potential precision than what we can |
| 401 | represent. To do this we add half the smallest storable fraction. |
| 402 | We then have to renormalise the number to allow for overflow. |
| 403 | |
| 404 | To convert a generic flonum into a TMS320C3X floating point |
| 405 | number, here's what we try to do.... |
| 406 | |
| 407 | The first thing is to generate a normalised mantissa (m) where |
| 408 | 1.0 <= m < 2 and to convert the exponent from base 16 to base 2. |
| 409 | We desire the binary point to be placed after the most significant |
| 410 | non zero bit. This process is done in two steps: firstly, the |
| 411 | littlenum with the most significant non zero bit is located (this |
| 412 | is done for us since leader points to this littlenum) and the |
| 413 | binary point (which is currently after the LSB of the littlenum |
| 414 | pointed to by low) is moved to before the MSB of the littlenum |
| 415 | pointed to by leader. This requires the exponent to be adjusted |
| 416 | by leader - low + 1. In the earlier example, the new exponent is |
| 417 | thus -4 + (5 - 2 + 1) = 0 (base 65536). We now need to convert |
| 418 | the exponent to base 2 by multiplying the exponent by 16 (log2 |
| 419 | 65536). The exponent base 2 is thus also zero. |
| 420 | |
| 421 | The second step is to hunt for the most significant non zero bit |
| 422 | in the leader littlenum. We do this by left shifting a copy of |
| 423 | the leader littlenum until bit 16 is set (0x10000) and counting |
| 424 | the number of shifts, S, required. The number of shifts then has to |
| 425 | be added to correct the exponent (base 2). For our example, this |
| 426 | will require 9 shifts and thus our normalised exponent (base 2) is |
| 427 | 0 + 9 = 9. Note that the worst case scenario is when the leader |
| 428 | littlenum is 1, thus requiring 16 shifts. |
| 429 | |
| 430 | We now have to left shift the other littlenums by the same amount, |
| 431 | propagating the shifted bits into the more significant littlenums. |
| 432 | To save a lot of unnecessary shifting we only have to consider |
| 433 | two or three littlenums, since the greatest number of mantissa |
| 434 | bits required is 24 + 1 rounding bit. While two littlenums |
| 435 | provide 32 bits of precision, the most significant littlenum |
| 436 | may only contain a single significant bit and thus an extra |
| 437 | littlenum is required. |
| 438 | |
| 439 | Denoting the number of bits in the fraction field as F, we require |
| 440 | G = F + 2 bits (one extra bit is for rounding, the other gets |
| 441 | suppressed). Say we required S shifts to find the most |
| 442 | significant bit in the leader littlenum, the number of left shifts |
| 443 | required to move this bit into bit position G - 1 is L = G + S - 17. |
| 444 | Note that this shift count may be negative for the short floating |
| 445 | point flavour (where F = 11 and thus G = 13 and potentially S < 3). |
| 446 | If L > 0 we have to shunt the next littlenum into position. Bit |
| 447 | 15 (the MSB) of the next littlenum needs to get moved into position |
| 448 | L - 1 (If L > 15 we need all the bits of this littlenum and |
| 449 | some more from the next one.). We subtract 16 from L and use this |
| 450 | as the left shift count; the resultant value we or with the |
| 451 | previous result. If L > 0, we repeat this operation. */ |
| 452 | |
| 453 | if (precision != S_PRECISION) |
| 454 | words[1] = 0x0000; |
| 455 | if (precision == E_PRECISION) |
| 456 | words[2] = words[3] = 0x0000; |
| 457 | |
| 458 | /* 0.0e0 or NaN seen. */ |
| 459 | if (flonum.low > flonum.leader /* = 0.0e0 */ |
| 460 | || flonum.sign == 0) /* = NaN */ |
| 461 | { |
| 462 | if(flonum.sign == 0) |
| 463 | as_bad ("Nan, using zero."); |
| 464 | words[0] = 0x8000; |
| 465 | return return_value; |
| 466 | } |
| 467 | |
| 468 | if (flonum.sign == 'P') |
| 469 | { |
| 470 | /* +INF: Replace with maximum float. */ |
| 471 | if (precision == S_PRECISION) |
| 472 | words[0] = 0x77ff; |
| 473 | else |
| 474 | { |
| 475 | words[0] = 0x7f7f; |
| 476 | words[1] = 0xffff; |
| 477 | } |
| 478 | if (precision == E_PRECISION) |
| 479 | { |
| 480 | words[2] = 0x7fff; |
| 481 | words[3] = 0xffff; |
| 482 | } |
| 483 | return return_value; |
| 484 | } |
| 485 | else if (flonum.sign == 'N') |
| 486 | { |
| 487 | /* -INF: Replace with maximum float. */ |
| 488 | if (precision == S_PRECISION) |
| 489 | words[0] = 0x7800; |
| 490 | else |
| 491 | words[0] = 0x7f80; |
| 492 | if (precision == E_PRECISION) |
| 493 | words[2] = 0x8000; |
| 494 | return return_value; |
| 495 | } |
| 496 | |
| 497 | exponent = (flonum.exponent + flonum.leader - flonum.low + 1) * 16; |
| 498 | |
| 499 | if (!(tmp = *flonum.leader)) |
| 500 | abort (); /* Hmmm. */ |
| 501 | shift = 0; /* Find position of first sig. bit. */ |
| 502 | while (tmp >>= 1) |
| 503 | shift++; |
| 504 | exponent -= (16 - shift); /* Adjust exponent. */ |
| 505 | |
| 506 | if (precision == S_PRECISION) /* Allow 1 rounding bit. */ |
| 507 | { |
| 508 | exponent_bits = 4; |
| 509 | mantissa_bits = 11; |
| 510 | } |
| 511 | else if(precision == F_PRECISION) |
| 512 | { |
| 513 | exponent_bits = 8; |
| 514 | mantissa_bits = 23; |
| 515 | } |
| 516 | else /* E_PRECISION */ |
| 517 | { |
| 518 | exponent_bits = 8; |
| 519 | mantissa_bits = 31; |
| 520 | } |
| 521 | |
| 522 | shift = mantissa_bits - shift; |
| 523 | |
| 524 | smant = 0; |
| 525 | mover = 0; |
| 526 | rbit = 0; |
| 527 | /* Store the mantissa data into smant and the roundbit into rbit */ |
| 528 | for (p = flonum.leader; p >= flonum.low && shift > -16; p--) |
| 529 | { |
| 530 | tmp = shift >= 0 ? *p << shift : *p >> -shift; |
| 531 | rbit = shift < 0 ? ((*p >> (-shift-1)) & 0x1) : 0; |
| 532 | smant |= tmp; |
| 533 | shift -= 16; |
| 534 | } |
| 535 | |
| 536 | /* OK, we've got our scaled mantissa so let's round it up */ |
| 537 | if(rbit) |
| 538 | { |
| 539 | /* If the mantissa is going to overflow when added, lets store |
| 540 | the extra bit in mover. -- A special case exists when |
| 541 | mantissa_bits is 31 (E_PRECISION). Then the first test cannot |
| 542 | be trusted, as result is host-dependent, thus the second |
| 543 | test. */ |
| 544 | if( smant == ((unsigned)(1<<(mantissa_bits+1))-1) |
| 545 | || smant == (unsigned)-1 ) /* This is to catch E_PRECISION cases */ |
| 546 | mover=1; |
| 547 | smant++; |
| 548 | } |
| 549 | |
| 550 | /* Get the scaled one value */ |
| 551 | sone = (1 << (mantissa_bits)); |
| 552 | |
| 553 | /* The number may be unnormalised so renormalise it... */ |
| 554 | if(mover) |
| 555 | { |
| 556 | smant >>= 1; |
| 557 | smant |= sone; /* Insert the bit from mover into smant */ |
| 558 | exponent++; |
| 559 | } |
| 560 | |
| 561 | /* The binary point is now between bit positions 11 and 10 or 23 and 22, |
| 562 | i.e., between mantissa_bits - 1 and mantissa_bits - 2 and the |
| 563 | bit at mantissa_bits - 1 should be set. */ |
| 564 | if (!(sone&smant)) |
| 565 | abort (); /* Ooops. */ |
| 566 | |
| 567 | if (flonum.sign == '+') |
| 568 | sfract = smant - sone; /* smant - 1.0. */ |
| 569 | else |
| 570 | { |
| 571 | /* This seems to work. */ |
| 572 | if (smant == sone) |
| 573 | { |
| 574 | exponent--; |
| 575 | sfract = 0; |
| 576 | } |
| 577 | else |
| 578 | { |
| 579 | sfract = -smant & (sone-1); /* 2.0 - smant. */ |
| 580 | } |
| 581 | sfract |= sone; /* Insert sign bit. */ |
| 582 | } |
| 583 | |
| 584 | if (abs (exponent) >= (1 << (exponent_bits - 1))) |
| 585 | as_bad ("Cannot represent exponent in %d bits", exponent_bits); |
| 586 | |
| 587 | /* Force exponent to fit in desired field width. */ |
| 588 | exponent &= (1 << (exponent_bits)) - 1; |
| 589 | |
| 590 | if (precision == E_PRECISION) |
| 591 | { |
| 592 | /* Map the float part first (100% equal format as F_PRECISION) */ |
| 593 | words[0] = exponent << (mantissa_bits+1-24); |
| 594 | words[0] |= sfract >> 24; |
| 595 | words[1] = sfract >> 8; |
| 596 | |
| 597 | /* Map the mantissa in the next */ |
| 598 | words[2] = sfract >> 16; |
| 599 | words[3] = sfract & 0xffff; |
| 600 | } |
| 601 | else |
| 602 | { |
| 603 | /* Insert the exponent data into the word */ |
| 604 | sfract |= exponent << (mantissa_bits+1); |
| 605 | |
| 606 | if (precision == S_PRECISION) |
| 607 | words[0] = sfract; |
| 608 | else |
| 609 | { |
| 610 | words[0] = sfract >> 16; |
| 611 | words[1] = sfract & 0xffff; |
| 612 | } |
| 613 | } |
| 614 | |
| 615 | return return_value; |
| 616 | } |
| 617 | |
| 618 | /* Returns pointer past text consumed. */ |
| 619 | static char * |
| 620 | tic4x_atof (str, what_kind, words) |
| 621 | char *str; |
| 622 | char what_kind; |
| 623 | LITTLENUM_TYPE *words; |
| 624 | { |
| 625 | /* Extra bits for zeroed low-order bits. The 1st MAX_PRECISION are |
| 626 | zeroed, the last contain flonum bits. */ |
| 627 | static LITTLENUM_TYPE bits[MAX_PRECISION + MAX_PRECISION + GUARD]; |
| 628 | char *return_value; |
| 629 | /* Number of 16-bit words in the format. */ |
| 630 | int precision; |
| 631 | FLONUM_TYPE save_gen_flonum; |
| 632 | |
| 633 | /* We have to save the generic_floating_point_number because it |
| 634 | contains storage allocation about the array of LITTLENUMs where |
| 635 | the value is actually stored. We will allocate our own array of |
| 636 | littlenums below, but have to restore the global one on exit. */ |
| 637 | save_gen_flonum = generic_floating_point_number; |
| 638 | |
| 639 | return_value = str; |
| 640 | generic_floating_point_number.low = bits + MAX_PRECISION; |
| 641 | generic_floating_point_number.high = NULL; |
| 642 | generic_floating_point_number.leader = NULL; |
| 643 | generic_floating_point_number.exponent = 0; |
| 644 | generic_floating_point_number.sign = '\0'; |
| 645 | |
| 646 | /* Use more LittleNums than seems necessary: the highest flonum may |
| 647 | have 15 leading 0 bits, so could be useless. */ |
| 648 | |
| 649 | memset (bits, '\0', sizeof (LITTLENUM_TYPE) * MAX_PRECISION); |
| 650 | |
| 651 | switch (what_kind) |
| 652 | { |
| 653 | case 's': |
| 654 | case 'S': |
| 655 | precision = S_PRECISION; |
| 656 | break; |
| 657 | |
| 658 | case 'd': |
| 659 | case 'D': |
| 660 | case 'f': |
| 661 | case 'F': |
| 662 | precision = F_PRECISION; |
| 663 | break; |
| 664 | |
| 665 | case 'E': |
| 666 | case 'e': |
| 667 | precision = E_PRECISION; |
| 668 | break; |
| 669 | |
| 670 | default: |
| 671 | as_bad ("Invalid floating point number"); |
| 672 | return (NULL); |
| 673 | } |
| 674 | |
| 675 | generic_floating_point_number.high |
| 676 | = generic_floating_point_number.low + precision - 1 + GUARD; |
| 677 | |
| 678 | if (atof_generic (&return_value, ".", EXP_CHARS, |
| 679 | &generic_floating_point_number)) |
| 680 | { |
| 681 | as_bad ("Invalid floating point number"); |
| 682 | return (NULL); |
| 683 | } |
| 684 | |
| 685 | tic4x_gen_to_words (generic_floating_point_number, |
| 686 | words, precision); |
| 687 | |
| 688 | /* Restore the generic_floating_point_number's storage alloc (and |
| 689 | everything else). */ |
| 690 | generic_floating_point_number = save_gen_flonum; |
| 691 | |
| 692 | return return_value; |
| 693 | } |
| 694 | |
| 695 | static void |
| 696 | tic4x_insert_reg (regname, regnum) |
| 697 | char *regname; |
| 698 | int regnum; |
| 699 | { |
| 700 | char buf[32]; |
| 701 | int i; |
| 702 | |
| 703 | symbol_table_insert (symbol_new (regname, reg_section, (valueT) regnum, |
| 704 | &zero_address_frag)); |
| 705 | for (i = 0; regname[i]; i++) |
| 706 | buf[i] = ISLOWER (regname[i]) ? TOUPPER (regname[i]) : regname[i]; |
| 707 | buf[i] = '\0'; |
| 708 | |
| 709 | symbol_table_insert (symbol_new (buf, reg_section, (valueT) regnum, |
| 710 | &zero_address_frag)); |
| 711 | } |
| 712 | |
| 713 | static void |
| 714 | tic4x_insert_sym (symname, value) |
| 715 | char *symname; |
| 716 | int value; |
| 717 | { |
| 718 | symbolS *symbolP; |
| 719 | |
| 720 | symbolP = symbol_new (symname, absolute_section, |
| 721 | (valueT) value, &zero_address_frag); |
| 722 | SF_SET_LOCAL (symbolP); |
| 723 | symbol_table_insert (symbolP); |
| 724 | } |
| 725 | |
| 726 | static char * |
| 727 | tic4x_expression (str, exp) |
| 728 | char *str; |
| 729 | expressionS *exp; |
| 730 | { |
| 731 | char *s; |
| 732 | char *t; |
| 733 | |
| 734 | t = input_line_pointer; /* Save line pointer. */ |
| 735 | input_line_pointer = str; |
| 736 | expression (exp); |
| 737 | s = input_line_pointer; |
| 738 | input_line_pointer = t; /* Restore line pointer. */ |
| 739 | return s; /* Return pointer to where parsing stopped. */ |
| 740 | } |
| 741 | |
| 742 | static char * |
| 743 | tic4x_expression_abs (str, value) |
| 744 | char *str; |
| 745 | offsetT *value; |
| 746 | { |
| 747 | char *s; |
| 748 | char *t; |
| 749 | |
| 750 | t = input_line_pointer; /* Save line pointer. */ |
| 751 | input_line_pointer = str; |
| 752 | *value = get_absolute_expression (); |
| 753 | s = input_line_pointer; |
| 754 | input_line_pointer = t; /* Restore line pointer. */ |
| 755 | return s; |
| 756 | } |
| 757 | |
| 758 | static void |
| 759 | tic4x_emit_char (c,b) |
| 760 | char c; |
| 761 | int b; |
| 762 | { |
| 763 | expressionS exp; |
| 764 | |
| 765 | exp.X_op = O_constant; |
| 766 | exp.X_add_number = c; |
| 767 | emit_expr (&exp, b); |
| 768 | } |
| 769 | |
| 770 | static void |
| 771 | tic4x_seg_alloc (name, seg, size, symbolP) |
| 772 | char *name ATTRIBUTE_UNUSED; |
| 773 | segT seg ATTRIBUTE_UNUSED; |
| 774 | int size; |
| 775 | symbolS *symbolP; |
| 776 | { |
| 777 | /* Note that the size is in words |
| 778 | so we multiply it by 4 to get the number of bytes to allocate. */ |
| 779 | |
| 780 | /* If we have symbol: .usect ".fred", size etc., |
| 781 | the symbol needs to point to the first location reserved |
| 782 | by the pseudo op. */ |
| 783 | |
| 784 | if (size) |
| 785 | { |
| 786 | char *p; |
| 787 | |
| 788 | p = frag_var (rs_fill, 1, 1, (relax_substateT) 0, |
| 789 | (symbolS *) symbolP, |
| 790 | size * OCTETS_PER_BYTE, (char *) 0); |
| 791 | *p = 0; |
| 792 | } |
| 793 | } |
| 794 | |
| 795 | /* .asg ["]character-string["], symbol */ |
| 796 | static void |
| 797 | tic4x_asg (x) |
| 798 | int x ATTRIBUTE_UNUSED; |
| 799 | { |
| 800 | char c; |
| 801 | char *name; |
| 802 | char *str; |
| 803 | char *tmp; |
| 804 | |
| 805 | SKIP_WHITESPACE (); |
| 806 | str = input_line_pointer; |
| 807 | |
| 808 | /* Skip string expression. */ |
| 809 | while (*input_line_pointer != ',' && *input_line_pointer) |
| 810 | input_line_pointer++; |
| 811 | if (*input_line_pointer != ',') |
| 812 | { |
| 813 | as_bad ("Comma expected\n"); |
| 814 | return; |
| 815 | } |
| 816 | *input_line_pointer++ = '\0'; |
| 817 | name = input_line_pointer; |
| 818 | c = get_symbol_end (); /* Get terminator. */ |
| 819 | tmp = xmalloc (strlen (str) + 1); |
| 820 | strcpy (tmp, str); |
| 821 | str = tmp; |
| 822 | tmp = xmalloc (strlen (name) + 1); |
| 823 | strcpy (tmp, name); |
| 824 | name = tmp; |
| 825 | if (hash_find (tic4x_asg_hash, name)) |
| 826 | hash_replace (tic4x_asg_hash, name, (PTR) str); |
| 827 | else |
| 828 | hash_insert (tic4x_asg_hash, name, (PTR) str); |
| 829 | *input_line_pointer = c; |
| 830 | demand_empty_rest_of_line (); |
| 831 | } |
| 832 | |
| 833 | /* .bss symbol, size */ |
| 834 | static void |
| 835 | tic4x_bss (x) |
| 836 | int x ATTRIBUTE_UNUSED; |
| 837 | { |
| 838 | char c; |
| 839 | char *name; |
| 840 | char *p; |
| 841 | offsetT size; |
| 842 | segT current_seg; |
| 843 | subsegT current_subseg; |
| 844 | symbolS *symbolP; |
| 845 | |
| 846 | current_seg = now_seg; /* Save current seg. */ |
| 847 | current_subseg = now_subseg; /* Save current subseg. */ |
| 848 | |
| 849 | SKIP_WHITESPACE (); |
| 850 | name = input_line_pointer; |
| 851 | c = get_symbol_end (); /* Get terminator. */ |
| 852 | if (c != ',') |
| 853 | { |
| 854 | as_bad (".bss size argument missing\n"); |
| 855 | return; |
| 856 | } |
| 857 | |
| 858 | input_line_pointer = |
| 859 | tic4x_expression_abs (++input_line_pointer, &size); |
| 860 | if (size < 0) |
| 861 | { |
| 862 | as_bad (".bss size %ld < 0!", (long) size); |
| 863 | return; |
| 864 | } |
| 865 | subseg_set (bss_section, 0); |
| 866 | symbolP = symbol_find_or_make (name); |
| 867 | |
| 868 | if (S_GET_SEGMENT (symbolP) == bss_section) |
| 869 | symbol_get_frag (symbolP)->fr_symbol = 0; |
| 870 | |
| 871 | symbol_set_frag (symbolP, frag_now); |
| 872 | |
| 873 | p = frag_var (rs_org, 1, 1, (relax_substateT) 0, symbolP, |
| 874 | size * OCTETS_PER_BYTE, (char *) 0); |
| 875 | *p = 0; /* Fill char. */ |
| 876 | |
| 877 | S_SET_SEGMENT (symbolP, bss_section); |
| 878 | |
| 879 | /* The symbol may already have been created with a preceding |
| 880 | ".globl" directive -- be careful not to step on storage class |
| 881 | in that case. Otherwise, set it to static. */ |
| 882 | if (S_GET_STORAGE_CLASS (symbolP) != C_EXT) |
| 883 | S_SET_STORAGE_CLASS (symbolP, C_STAT); |
| 884 | |
| 885 | subseg_set (current_seg, current_subseg); /* Restore current seg. */ |
| 886 | demand_empty_rest_of_line (); |
| 887 | } |
| 888 | |
| 889 | static void |
| 890 | tic4x_globl (ignore) |
| 891 | int ignore ATTRIBUTE_UNUSED; |
| 892 | { |
| 893 | char *name; |
| 894 | int c; |
| 895 | symbolS *symbolP; |
| 896 | |
| 897 | do |
| 898 | { |
| 899 | name = input_line_pointer; |
| 900 | c = get_symbol_end (); |
| 901 | symbolP = symbol_find_or_make (name); |
| 902 | *input_line_pointer = c; |
| 903 | SKIP_WHITESPACE (); |
| 904 | S_SET_STORAGE_CLASS (symbolP, C_EXT); |
| 905 | if (c == ',') |
| 906 | { |
| 907 | input_line_pointer++; |
| 908 | SKIP_WHITESPACE (); |
| 909 | if (*input_line_pointer == '\n') |
| 910 | c = '\n'; |
| 911 | } |
| 912 | } |
| 913 | while (c == ','); |
| 914 | |
| 915 | demand_empty_rest_of_line (); |
| 916 | } |
| 917 | |
| 918 | /* Handle .byte, .word. .int, .long */ |
| 919 | static void |
| 920 | tic4x_cons (bytes) |
| 921 | int bytes; |
| 922 | { |
| 923 | register unsigned int c; |
| 924 | do |
| 925 | { |
| 926 | SKIP_WHITESPACE (); |
| 927 | if (*input_line_pointer == '"') |
| 928 | { |
| 929 | input_line_pointer++; |
| 930 | while (is_a_char (c = next_char_of_string ())) |
| 931 | tic4x_emit_char (c, 4); |
| 932 | know (input_line_pointer[-1] == '\"'); |
| 933 | } |
| 934 | else |
| 935 | { |
| 936 | expressionS exp; |
| 937 | |
| 938 | input_line_pointer = tic4x_expression (input_line_pointer, &exp); |
| 939 | if (exp.X_op == O_constant) |
| 940 | { |
| 941 | switch (bytes) |
| 942 | { |
| 943 | case 1: |
| 944 | exp.X_add_number &= 255; |
| 945 | break; |
| 946 | case 2: |
| 947 | exp.X_add_number &= 65535; |
| 948 | break; |
| 949 | } |
| 950 | } |
| 951 | /* Perhaps we should disallow .byte and .hword with |
| 952 | a non constant expression that will require relocation. */ |
| 953 | emit_expr (&exp, 4); |
| 954 | } |
| 955 | } |
| 956 | while (*input_line_pointer++ == ','); |
| 957 | |
| 958 | input_line_pointer--; /* Put terminator back into stream. */ |
| 959 | demand_empty_rest_of_line (); |
| 960 | } |
| 961 | |
| 962 | /* Handle .ascii, .asciz, .string */ |
| 963 | static void |
| 964 | tic4x_stringer (append_zero) |
| 965 | int append_zero; /*ex: bytes */ |
| 966 | { |
| 967 | int bytes; |
| 968 | register unsigned int c; |
| 969 | |
| 970 | bytes = 0; |
| 971 | do |
| 972 | { |
| 973 | SKIP_WHITESPACE (); |
| 974 | if (*input_line_pointer == '"') |
| 975 | { |
| 976 | input_line_pointer++; |
| 977 | while (is_a_char (c = next_char_of_string ())) |
| 978 | { |
| 979 | tic4x_emit_char (c, 1); |
| 980 | bytes++; |
| 981 | } |
| 982 | |
| 983 | if (append_zero) |
| 984 | { |
| 985 | tic4x_emit_char (c, 1); |
| 986 | bytes++; |
| 987 | } |
| 988 | |
| 989 | know (input_line_pointer[-1] == '\"'); |
| 990 | } |
| 991 | else |
| 992 | { |
| 993 | expressionS exp; |
| 994 | |
| 995 | input_line_pointer = tic4x_expression (input_line_pointer, &exp); |
| 996 | if (exp.X_op != O_constant) |
| 997 | { |
| 998 | as_bad("Non-constant symbols not allowed\n"); |
| 999 | return; |
| 1000 | } |
| 1001 | exp.X_add_number &= 255; /* Limit numeber to 8-bit */ |
| 1002 | emit_expr (&exp, 1); |
| 1003 | bytes++; |
| 1004 | } |
| 1005 | } |
| 1006 | while (*input_line_pointer++ == ','); |
| 1007 | |
| 1008 | /* Fill out the rest of the expression with 0's to fill up a full word */ |
| 1009 | if ( bytes&0x3 ) |
| 1010 | tic4x_emit_char (0, 4-(bytes&0x3)); |
| 1011 | |
| 1012 | input_line_pointer--; /* Put terminator back into stream. */ |
| 1013 | demand_empty_rest_of_line (); |
| 1014 | } |
| 1015 | |
| 1016 | /* .eval expression, symbol */ |
| 1017 | static void |
| 1018 | tic4x_eval (x) |
| 1019 | int x ATTRIBUTE_UNUSED; |
| 1020 | { |
| 1021 | char c; |
| 1022 | offsetT value; |
| 1023 | char *name; |
| 1024 | |
| 1025 | SKIP_WHITESPACE (); |
| 1026 | input_line_pointer = |
| 1027 | tic4x_expression_abs (input_line_pointer, &value); |
| 1028 | if (*input_line_pointer++ != ',') |
| 1029 | { |
| 1030 | as_bad ("Symbol missing\n"); |
| 1031 | return; |
| 1032 | } |
| 1033 | name = input_line_pointer; |
| 1034 | c = get_symbol_end (); /* Get terminator. */ |
| 1035 | demand_empty_rest_of_line (); |
| 1036 | tic4x_insert_sym (name, value); |
| 1037 | } |
| 1038 | |
| 1039 | /* Reset local labels. */ |
| 1040 | static void |
| 1041 | tic4x_newblock (x) |
| 1042 | int x ATTRIBUTE_UNUSED; |
| 1043 | { |
| 1044 | dollar_label_clear (); |
| 1045 | } |
| 1046 | |
| 1047 | /* .sect "section-name" [, value] */ |
| 1048 | /* .sect ["]section-name[:subsection-name]["] [, value] */ |
| 1049 | static void |
| 1050 | tic4x_sect (x) |
| 1051 | int x ATTRIBUTE_UNUSED; |
| 1052 | { |
| 1053 | char c; |
| 1054 | char *section_name; |
| 1055 | char *subsection_name; |
| 1056 | char *name; |
| 1057 | segT seg; |
| 1058 | offsetT num; |
| 1059 | |
| 1060 | SKIP_WHITESPACE (); |
| 1061 | if (*input_line_pointer == '"') |
| 1062 | input_line_pointer++; |
| 1063 | section_name = input_line_pointer; |
| 1064 | c = get_symbol_end (); /* Get terminator. */ |
| 1065 | input_line_pointer++; /* Skip null symbol terminator. */ |
| 1066 | name = xmalloc (input_line_pointer - section_name + 1); |
| 1067 | strcpy (name, section_name); |
| 1068 | |
| 1069 | /* TI C from version 5.0 allows a section name to contain a |
| 1070 | subsection name as well. The subsection name is separated by a |
| 1071 | ':' from the section name. Currently we scan the subsection |
| 1072 | name and discard it. |
| 1073 | Volker Kuhlmann <v.kuhlmann@elec.canterbury.ac.nz>. */ |
| 1074 | if (c == ':') |
| 1075 | { |
| 1076 | subsection_name = input_line_pointer; |
| 1077 | c = get_symbol_end (); /* Get terminator. */ |
| 1078 | input_line_pointer++; /* Skip null symbol terminator. */ |
| 1079 | as_warn (".sect: subsection name ignored"); |
| 1080 | } |
| 1081 | |
| 1082 | /* We might still have a '"' to discard, but the character after a |
| 1083 | symbol name will be overwritten with a \0 by get_symbol_end() |
| 1084 | [VK]. */ |
| 1085 | |
| 1086 | if (c == ',') |
| 1087 | input_line_pointer = |
| 1088 | tic4x_expression_abs (input_line_pointer, &num); |
| 1089 | else if (*input_line_pointer == ',') |
| 1090 | { |
| 1091 | input_line_pointer = |
| 1092 | tic4x_expression_abs (++input_line_pointer, &num); |
| 1093 | } |
| 1094 | else |
| 1095 | num = 0; |
| 1096 | |
| 1097 | seg = subseg_new (name, num); |
| 1098 | if (line_label != NULL) |
| 1099 | { |
| 1100 | S_SET_SEGMENT (line_label, seg); |
| 1101 | symbol_set_frag (line_label, frag_now); |
| 1102 | } |
| 1103 | |
| 1104 | if (bfd_get_section_flags (stdoutput, seg) == SEC_NO_FLAGS) |
| 1105 | { |
| 1106 | if (!bfd_set_section_flags (stdoutput, seg, SEC_DATA)) |
| 1107 | as_warn ("Error setting flags for \"%s\": %s", name, |
| 1108 | bfd_errmsg (bfd_get_error ())); |
| 1109 | } |
| 1110 | |
| 1111 | /* If the last character overwritten by get_symbol_end() was an |
| 1112 | end-of-line, we must restore it or the end of the line will not be |
| 1113 | recognised and scanning extends into the next line, stopping with |
| 1114 | an error (blame Volker Kuhlmann <v.kuhlmann@elec.canterbury.ac.nz> |
| 1115 | if this is not true). */ |
| 1116 | if (is_end_of_line[(unsigned char) c]) |
| 1117 | *(--input_line_pointer) = c; |
| 1118 | |
| 1119 | demand_empty_rest_of_line (); |
| 1120 | } |
| 1121 | |
| 1122 | /* symbol[:] .set value or .set symbol, value */ |
| 1123 | static void |
| 1124 | tic4x_set (x) |
| 1125 | int x ATTRIBUTE_UNUSED; |
| 1126 | { |
| 1127 | symbolS *symbolP; |
| 1128 | |
| 1129 | SKIP_WHITESPACE (); |
| 1130 | if ((symbolP = line_label) == NULL) |
| 1131 | { |
| 1132 | char c; |
| 1133 | char *name; |
| 1134 | |
| 1135 | name = input_line_pointer; |
| 1136 | c = get_symbol_end (); /* Get terminator. */ |
| 1137 | if (c != ',') |
| 1138 | { |
| 1139 | as_bad (".set syntax invalid\n"); |
| 1140 | ignore_rest_of_line (); |
| 1141 | return; |
| 1142 | } |
| 1143 | ++input_line_pointer; |
| 1144 | symbolP = symbol_find_or_make (name); |
| 1145 | } |
| 1146 | else |
| 1147 | symbol_table_insert (symbolP); |
| 1148 | |
| 1149 | pseudo_set (symbolP); |
| 1150 | demand_empty_rest_of_line (); |
| 1151 | } |
| 1152 | |
| 1153 | /* [symbol] .usect ["]section-name["], size-in-words [, alignment-flag] */ |
| 1154 | static void |
| 1155 | tic4x_usect (x) |
| 1156 | int x ATTRIBUTE_UNUSED; |
| 1157 | { |
| 1158 | char c; |
| 1159 | char *name; |
| 1160 | char *section_name; |
| 1161 | segT seg; |
| 1162 | offsetT size, alignment_flag; |
| 1163 | segT current_seg; |
| 1164 | subsegT current_subseg; |
| 1165 | |
| 1166 | current_seg = now_seg; /* save current seg. */ |
| 1167 | current_subseg = now_subseg; /* save current subseg. */ |
| 1168 | |
| 1169 | SKIP_WHITESPACE (); |
| 1170 | if (*input_line_pointer == '"') |
| 1171 | input_line_pointer++; |
| 1172 | section_name = input_line_pointer; |
| 1173 | c = get_symbol_end (); /* Get terminator. */ |
| 1174 | input_line_pointer++; /* Skip null symbol terminator. */ |
| 1175 | name = xmalloc (input_line_pointer - section_name + 1); |
| 1176 | strcpy (name, section_name); |
| 1177 | |
| 1178 | if (c == ',') |
| 1179 | input_line_pointer = |
| 1180 | tic4x_expression_abs (input_line_pointer, &size); |
| 1181 | else if (*input_line_pointer == ',') |
| 1182 | { |
| 1183 | input_line_pointer = |
| 1184 | tic4x_expression_abs (++input_line_pointer, &size); |
| 1185 | } |
| 1186 | else |
| 1187 | size = 0; |
| 1188 | |
| 1189 | /* Read a possibly present third argument (alignment flag) [VK]. */ |
| 1190 | if (*input_line_pointer == ',') |
| 1191 | { |
| 1192 | input_line_pointer = |
| 1193 | tic4x_expression_abs (++input_line_pointer, &alignment_flag); |
| 1194 | } |
| 1195 | else |
| 1196 | alignment_flag = 0; |
| 1197 | if (alignment_flag) |
| 1198 | as_warn (".usect: non-zero alignment flag ignored"); |
| 1199 | |
| 1200 | seg = subseg_new (name, 0); |
| 1201 | if (line_label != NULL) |
| 1202 | { |
| 1203 | S_SET_SEGMENT (line_label, seg); |
| 1204 | symbol_set_frag (line_label, frag_now); |
| 1205 | S_SET_VALUE (line_label, frag_now_fix ()); |
| 1206 | } |
| 1207 | seg_info (seg)->bss = 1; /* Uninitialised data. */ |
| 1208 | if (!bfd_set_section_flags (stdoutput, seg, SEC_ALLOC)) |
| 1209 | as_warn ("Error setting flags for \"%s\": %s", name, |
| 1210 | bfd_errmsg (bfd_get_error ())); |
| 1211 | tic4x_seg_alloc (name, seg, size, line_label); |
| 1212 | |
| 1213 | if (S_GET_STORAGE_CLASS (line_label) != C_EXT) |
| 1214 | S_SET_STORAGE_CLASS (line_label, C_STAT); |
| 1215 | |
| 1216 | subseg_set (current_seg, current_subseg); /* Restore current seg. */ |
| 1217 | demand_empty_rest_of_line (); |
| 1218 | } |
| 1219 | |
| 1220 | /* .version cpu-version. */ |
| 1221 | static void |
| 1222 | tic4x_version (x) |
| 1223 | int x ATTRIBUTE_UNUSED; |
| 1224 | { |
| 1225 | offsetT temp; |
| 1226 | |
| 1227 | input_line_pointer = |
| 1228 | tic4x_expression_abs (input_line_pointer, &temp); |
| 1229 | if (!IS_CPU_TIC3X (temp) && !IS_CPU_TIC4X (temp)) |
| 1230 | as_bad ("This assembler does not support processor generation %ld", |
| 1231 | (long) temp); |
| 1232 | |
| 1233 | if (tic4x_cpu && temp != (offsetT) tic4x_cpu) |
| 1234 | as_warn ("Changing processor generation on fly not supported..."); |
| 1235 | tic4x_cpu = temp; |
| 1236 | demand_empty_rest_of_line (); |
| 1237 | } |
| 1238 | |
| 1239 | static void |
| 1240 | tic4x_init_regtable () |
| 1241 | { |
| 1242 | unsigned int i; |
| 1243 | |
| 1244 | for (i = 0; i < tic3x_num_registers; i++) |
| 1245 | tic4x_insert_reg (tic3x_registers[i].name, |
| 1246 | tic3x_registers[i].regno); |
| 1247 | |
| 1248 | if (IS_CPU_TIC4X (tic4x_cpu)) |
| 1249 | { |
| 1250 | /* Add additional Tic4x registers, overriding some C3x ones. */ |
| 1251 | for (i = 0; i < tic4x_num_registers; i++) |
| 1252 | tic4x_insert_reg (tic4x_registers[i].name, |
| 1253 | tic4x_registers[i].regno); |
| 1254 | } |
| 1255 | } |
| 1256 | |
| 1257 | static void |
| 1258 | tic4x_init_symbols () |
| 1259 | { |
| 1260 | /* The TI tools accept case insensitive versions of these symbols, |
| 1261 | we don't ! |
| 1262 | |
| 1263 | For TI C/Asm 5.0 |
| 1264 | |
| 1265 | .TMS320xx 30,31,32,40,or 44 set according to -v flag |
| 1266 | .C3X or .C3x 1 or 0 1 if -v30,-v31,or -v32 |
| 1267 | .C30 1 or 0 1 if -v30 |
| 1268 | .C31 1 or 0 1 if -v31 |
| 1269 | .C32 1 or 0 1 if -v32 |
| 1270 | .C4X or .C4x 1 or 0 1 if -v40, or -v44 |
| 1271 | .C40 1 or 0 1 if -v40 |
| 1272 | .C44 1 or 0 1 if -v44 |
| 1273 | |
| 1274 | .REGPARM 1 or 0 1 if -mr option used |
| 1275 | .BIGMODEL 1 or 0 1 if -mb option used |
| 1276 | |
| 1277 | These symbols are currently supported but will be removed in a |
| 1278 | later version: |
| 1279 | .TMS320C30 1 or 0 1 if -v30,-v31,or -v32 |
| 1280 | .TMS320C31 1 or 0 1 if -v31 |
| 1281 | .TMS320C32 1 or 0 1 if -v32 |
| 1282 | .TMS320C40 1 or 0 1 if -v40, or -v44 |
| 1283 | .TMS320C44 1 or 0 1 if -v44 |
| 1284 | |
| 1285 | Source: TI: TMS320C3x/C4x Assembly Language Tools User's Guide, |
| 1286 | 1997, SPRU035C, p. 3-17/3-18. */ |
| 1287 | tic4x_insert_sym (".REGPARM", tic4x_reg_args); |
| 1288 | tic4x_insert_sym (".MEMPARM", !tic4x_reg_args); |
| 1289 | tic4x_insert_sym (".BIGMODEL", tic4x_big_model); |
| 1290 | tic4x_insert_sym (".C30INTERRUPT", 0); |
| 1291 | tic4x_insert_sym (".TMS320xx", tic4x_cpu == 0 ? 40 : tic4x_cpu); |
| 1292 | tic4x_insert_sym (".C3X", tic4x_cpu == 30 || tic4x_cpu == 31 || tic4x_cpu == 32 || tic4x_cpu == 33); |
| 1293 | tic4x_insert_sym (".C3x", tic4x_cpu == 30 || tic4x_cpu == 31 || tic4x_cpu == 32 || tic4x_cpu == 33); |
| 1294 | tic4x_insert_sym (".C4X", tic4x_cpu == 0 || tic4x_cpu == 40 || tic4x_cpu == 44); |
| 1295 | tic4x_insert_sym (".C4x", tic4x_cpu == 0 || tic4x_cpu == 40 || tic4x_cpu == 44); |
| 1296 | /* Do we need to have the following symbols also in lower case? */ |
| 1297 | tic4x_insert_sym (".TMS320C30", tic4x_cpu == 30 || tic4x_cpu == 31 || tic4x_cpu == 32 || tic4x_cpu == 33); |
| 1298 | tic4x_insert_sym (".tms320C30", tic4x_cpu == 30 || tic4x_cpu == 31 || tic4x_cpu == 32 || tic4x_cpu == 33); |
| 1299 | tic4x_insert_sym (".TMS320C31", tic4x_cpu == 31); |
| 1300 | tic4x_insert_sym (".tms320C31", tic4x_cpu == 31); |
| 1301 | tic4x_insert_sym (".TMS320C32", tic4x_cpu == 32); |
| 1302 | tic4x_insert_sym (".tms320C32", tic4x_cpu == 32); |
| 1303 | tic4x_insert_sym (".TMS320C33", tic4x_cpu == 33); |
| 1304 | tic4x_insert_sym (".tms320C33", tic4x_cpu == 33); |
| 1305 | tic4x_insert_sym (".TMS320C40", tic4x_cpu == 40 || tic4x_cpu == 44 || tic4x_cpu == 0); |
| 1306 | tic4x_insert_sym (".tms320C40", tic4x_cpu == 40 || tic4x_cpu == 44 || tic4x_cpu == 0); |
| 1307 | tic4x_insert_sym (".TMS320C44", tic4x_cpu == 44); |
| 1308 | tic4x_insert_sym (".tms320C44", tic4x_cpu == 44); |
| 1309 | tic4x_insert_sym (".TMX320C40", 0); /* C40 first pass silicon ? */ |
| 1310 | tic4x_insert_sym (".tmx320C40", 0); |
| 1311 | } |
| 1312 | |
| 1313 | /* Insert a new instruction template into hash table. */ |
| 1314 | static int |
| 1315 | tic4x_inst_insert (const tic4x_inst_t *inst) |
| 1316 | { |
| 1317 | static char prev_name[16]; |
| 1318 | const char *retval = NULL; |
| 1319 | |
| 1320 | /* Only insert the first name if have several similar entries. */ |
| 1321 | if (!strcmp (inst->name, prev_name) || inst->name[0] == '\0') |
| 1322 | return 1; |
| 1323 | |
| 1324 | retval = hash_insert (tic4x_op_hash, inst->name, (PTR) inst); |
| 1325 | if (retval != NULL) |
| 1326 | fprintf (stderr, "internal error: can't hash `%s': %s\n", |
| 1327 | inst->name, retval); |
| 1328 | else |
| 1329 | strcpy (prev_name, inst->name); |
| 1330 | return retval == NULL; |
| 1331 | } |
| 1332 | |
| 1333 | /* Make a new instruction template. */ |
| 1334 | static tic4x_inst_t * |
| 1335 | tic4x_inst_make (name, opcode, args) |
| 1336 | char *name; |
| 1337 | unsigned long opcode; |
| 1338 | char *args; |
| 1339 | { |
| 1340 | static tic4x_inst_t *insts = NULL; |
| 1341 | static char *names = NULL; |
| 1342 | static int index = 0; |
| 1343 | |
| 1344 | if (insts == NULL) |
| 1345 | { |
| 1346 | /* Allocate memory to store name strings. */ |
| 1347 | names = (char *) xmalloc (sizeof (char) * 8192); |
| 1348 | /* Allocate memory for additional insts. */ |
| 1349 | insts = (tic4x_inst_t *) |
| 1350 | xmalloc (sizeof (tic4x_inst_t) * 1024); |
| 1351 | } |
| 1352 | insts[index].name = names; |
| 1353 | insts[index].opcode = opcode; |
| 1354 | insts[index].opmask = 0xffffffff; |
| 1355 | insts[index].args = args; |
| 1356 | index++; |
| 1357 | |
| 1358 | do |
| 1359 | *names++ = *name++; |
| 1360 | while (*name); |
| 1361 | *names++ = '\0'; |
| 1362 | |
| 1363 | return &insts[index - 1]; |
| 1364 | } |
| 1365 | |
| 1366 | /* Add instruction template, creating dynamic templates as required. */ |
| 1367 | static int |
| 1368 | tic4x_inst_add (const tic4x_inst_t *insts) |
| 1369 | { |
| 1370 | char *s = insts->name; |
| 1371 | char *d; |
| 1372 | unsigned int i; |
| 1373 | int ok = 1; |
| 1374 | char name[16]; |
| 1375 | |
| 1376 | d = name; |
| 1377 | |
| 1378 | /* We do not care about INSNs that is not a part of our |
| 1379 | oplevel setting */ |
| 1380 | if (!insts->oplevel & tic4x_oplevel) |
| 1381 | return ok; |
| 1382 | |
| 1383 | while (1) |
| 1384 | { |
| 1385 | switch (*s) |
| 1386 | { |
| 1387 | case 'B': |
| 1388 | case 'C': |
| 1389 | /* Dynamically create all the conditional insts. */ |
| 1390 | for (i = 0; i < tic4x_num_conds; i++) |
| 1391 | { |
| 1392 | tic4x_inst_t *inst; |
| 1393 | int k = 0; |
| 1394 | char *c = tic4x_conds[i].name; |
| 1395 | char *e = d; |
| 1396 | |
| 1397 | while (*c) |
| 1398 | *e++ = *c++; |
| 1399 | c = s + 1; |
| 1400 | while (*c) |
| 1401 | *e++ = *c++; |
| 1402 | *e = '\0'; |
| 1403 | |
| 1404 | /* If instruction found then have already processed it. */ |
| 1405 | if (hash_find (tic4x_op_hash, name)) |
| 1406 | return 1; |
| 1407 | |
| 1408 | do |
| 1409 | { |
| 1410 | inst = tic4x_inst_make (name, insts[k].opcode + |
| 1411 | (tic4x_conds[i].cond << |
| 1412 | (*s == 'B' ? 16 : 23)), |
| 1413 | insts[k].args); |
| 1414 | if (k == 0) /* Save strcmp() with following func. */ |
| 1415 | ok &= tic4x_inst_insert (inst); |
| 1416 | k++; |
| 1417 | } |
| 1418 | while (!strcmp (insts->name, |
| 1419 | insts[k].name)); |
| 1420 | } |
| 1421 | return ok; |
| 1422 | break; |
| 1423 | |
| 1424 | case '\0': |
| 1425 | return tic4x_inst_insert (insts); |
| 1426 | break; |
| 1427 | |
| 1428 | default: |
| 1429 | *d++ = *s++; |
| 1430 | break; |
| 1431 | } |
| 1432 | } |
| 1433 | } |
| 1434 | |
| 1435 | /* This function is called once, at assembler startup time. It should |
| 1436 | set up all the tables, etc., that the MD part of the assembler will |
| 1437 | need. */ |
| 1438 | void |
| 1439 | md_begin () |
| 1440 | { |
| 1441 | int ok = 1; |
| 1442 | unsigned int i; |
| 1443 | |
| 1444 | /* Setup the proper opcode level according to the |
| 1445 | commandline parameters */ |
| 1446 | tic4x_oplevel = OP_C3X; |
| 1447 | |
| 1448 | if ( IS_CPU_TIC4X(tic4x_cpu) ) |
| 1449 | tic4x_oplevel |= OP_C4X; |
| 1450 | |
| 1451 | if ( ( tic4x_cpu == 31 && tic4x_revision >= 6) |
| 1452 | || (tic4x_cpu == 32 && tic4x_revision >= 2) |
| 1453 | || (tic4x_cpu == 33) |
| 1454 | || tic4x_enhanced ) |
| 1455 | tic4x_oplevel |= OP_ENH; |
| 1456 | |
| 1457 | if ( ( tic4x_cpu == 30 && tic4x_revision >= 7) |
| 1458 | || (tic4x_cpu == 31 && tic4x_revision >= 5) |
| 1459 | || (tic4x_cpu == 32) |
| 1460 | || tic4x_lowpower ) |
| 1461 | tic4x_oplevel |= OP_LPWR; |
| 1462 | |
| 1463 | if ( ( tic4x_cpu == 30 && tic4x_revision >= 7) |
| 1464 | || (tic4x_cpu == 31 && tic4x_revision >= 5) |
| 1465 | || (tic4x_cpu == 32) |
| 1466 | || (tic4x_cpu == 33) |
| 1467 | || (tic4x_cpu == 40 && tic4x_revision >= 5) |
| 1468 | || (tic4x_cpu == 44) |
| 1469 | || tic4x_idle2 ) |
| 1470 | tic4x_oplevel |= OP_IDLE2; |
| 1471 | |
| 1472 | /* Create hash table for mnemonics. */ |
| 1473 | tic4x_op_hash = hash_new (); |
| 1474 | |
| 1475 | /* Create hash table for asg pseudo. */ |
| 1476 | tic4x_asg_hash = hash_new (); |
| 1477 | |
| 1478 | /* Add mnemonics to hash table, expanding conditional mnemonics on fly. */ |
| 1479 | for (i = 0; i < tic4x_num_insts; i++) |
| 1480 | ok &= tic4x_inst_add (tic4x_insts + i); |
| 1481 | |
| 1482 | /* Create dummy inst to avoid errors accessing end of table. */ |
| 1483 | tic4x_inst_make ("", 0, ""); |
| 1484 | |
| 1485 | if (!ok) |
| 1486 | as_fatal ("Broken assembler. No assembly attempted."); |
| 1487 | |
| 1488 | /* Add registers to symbol table. */ |
| 1489 | tic4x_init_regtable (); |
| 1490 | |
| 1491 | /* Add predefined symbols to symbol table. */ |
| 1492 | tic4x_init_symbols (); |
| 1493 | } |
| 1494 | |
| 1495 | void |
| 1496 | tic4x_end () |
| 1497 | { |
| 1498 | bfd_set_arch_mach (stdoutput, bfd_arch_tic4x, |
| 1499 | IS_CPU_TIC4X (tic4x_cpu) ? bfd_mach_tic4x : bfd_mach_tic3x); |
| 1500 | } |
| 1501 | |
| 1502 | static int |
| 1503 | tic4x_indirect_parse (operand, indirect) |
| 1504 | tic4x_operand_t *operand; |
| 1505 | const tic4x_indirect_t *indirect; |
| 1506 | { |
| 1507 | char *n = indirect->name; |
| 1508 | char *s = input_line_pointer; |
| 1509 | char *b; |
| 1510 | symbolS *symbolP; |
| 1511 | char name[32]; |
| 1512 | |
| 1513 | operand->disp = 0; |
| 1514 | for (; *n; n++) |
| 1515 | { |
| 1516 | switch (*n) |
| 1517 | { |
| 1518 | case 'a': /* Need to match aux register. */ |
| 1519 | b = name; |
| 1520 | #ifdef TIC4X_ALT_SYNTAX |
| 1521 | if (*s == '%') |
| 1522 | s++; |
| 1523 | #endif |
| 1524 | while (ISALNUM (*s)) |
| 1525 | *b++ = *s++; |
| 1526 | *b++ = '\0'; |
| 1527 | if (!(symbolP = symbol_find (name))) |
| 1528 | return 0; |
| 1529 | |
| 1530 | if (S_GET_SEGMENT (symbolP) != reg_section) |
| 1531 | return 0; |
| 1532 | |
| 1533 | operand->aregno = S_GET_VALUE (symbolP); |
| 1534 | if (operand->aregno >= REG_AR0 && operand->aregno <= REG_AR7) |
| 1535 | break; |
| 1536 | |
| 1537 | as_bad ("Auxiliary register AR0--AR7 required for indirect"); |
| 1538 | return -1; |
| 1539 | |
| 1540 | case 'd': /* Need to match constant for disp. */ |
| 1541 | #ifdef TIC4X_ALT_SYNTAX |
| 1542 | if (*s == '%') /* expr() will die if we don't skip this. */ |
| 1543 | s++; |
| 1544 | #endif |
| 1545 | s = tic4x_expression (s, &operand->expr); |
| 1546 | if (operand->expr.X_op != O_constant) |
| 1547 | return 0; |
| 1548 | operand->disp = operand->expr.X_add_number; |
| 1549 | if (operand->disp < 0 || operand->disp > 255) |
| 1550 | { |
| 1551 | as_bad ("Bad displacement %d (require 0--255)\n", |
| 1552 | operand->disp); |
| 1553 | return -1; |
| 1554 | } |
| 1555 | break; |
| 1556 | |
| 1557 | case 'y': /* Need to match IR0. */ |
| 1558 | case 'z': /* Need to match IR1. */ |
| 1559 | #ifdef TIC4X_ALT_SYNTAX |
| 1560 | if (*s == '%') |
| 1561 | s++; |
| 1562 | #endif |
| 1563 | s = tic4x_expression (s, &operand->expr); |
| 1564 | if (operand->expr.X_op != O_register) |
| 1565 | return 0; |
| 1566 | if (operand->expr.X_add_number != REG_IR0 |
| 1567 | && operand->expr.X_add_number != REG_IR1) |
| 1568 | { |
| 1569 | as_bad ("Index register IR0,IR1 required for displacement"); |
| 1570 | return -1; |
| 1571 | } |
| 1572 | |
| 1573 | if (*n == 'y' && operand->expr.X_add_number == REG_IR0) |
| 1574 | break; |
| 1575 | if (*n == 'z' && operand->expr.X_add_number == REG_IR1) |
| 1576 | break; |
| 1577 | return 0; |
| 1578 | |
| 1579 | case '(': |
| 1580 | if (*s != '(') /* No displacement, assume to be 1. */ |
| 1581 | { |
| 1582 | operand->disp = 1; |
| 1583 | while (*n != ')') |
| 1584 | n++; |
| 1585 | } |
| 1586 | else |
| 1587 | s++; |
| 1588 | break; |
| 1589 | |
| 1590 | default: |
| 1591 | if (TOLOWER (*s) != *n) |
| 1592 | return 0; |
| 1593 | s++; |
| 1594 | } |
| 1595 | } |
| 1596 | if (*s != ' ' && *s != ',' && *s != '\0') |
| 1597 | return 0; |
| 1598 | input_line_pointer = s; |
| 1599 | return 1; |
| 1600 | } |
| 1601 | |
| 1602 | static char * |
| 1603 | tic4x_operand_parse (s, operand) |
| 1604 | char *s; |
| 1605 | tic4x_operand_t *operand; |
| 1606 | { |
| 1607 | unsigned int i; |
| 1608 | char c; |
| 1609 | int ret; |
| 1610 | expressionS *exp = &operand->expr; |
| 1611 | char *save = input_line_pointer; |
| 1612 | char *str; |
| 1613 | char *new; |
| 1614 | struct hash_entry *entry = NULL; |
| 1615 | |
| 1616 | input_line_pointer = s; |
| 1617 | SKIP_WHITESPACE (); |
| 1618 | |
| 1619 | str = input_line_pointer; |
| 1620 | c = get_symbol_end (); /* Get terminator. */ |
| 1621 | new = input_line_pointer; |
| 1622 | if (strlen (str) && (entry = hash_find (tic4x_asg_hash, str)) != NULL) |
| 1623 | { |
| 1624 | *input_line_pointer = c; |
| 1625 | input_line_pointer = (char *) entry; |
| 1626 | } |
| 1627 | else |
| 1628 | { |
| 1629 | *input_line_pointer = c; |
| 1630 | input_line_pointer = str; |
| 1631 | } |
| 1632 | |
| 1633 | operand->mode = M_UNKNOWN; |
| 1634 | switch (*input_line_pointer) |
| 1635 | { |
| 1636 | #ifdef TIC4X_ALT_SYNTAX |
| 1637 | case '%': |
| 1638 | input_line_pointer = tic4x_expression (++input_line_pointer, exp); |
| 1639 | if (exp->X_op != O_register) |
| 1640 | as_bad ("Expecting a register name"); |
| 1641 | operand->mode = M_REGISTER; |
| 1642 | break; |
| 1643 | |
| 1644 | case '^': |
| 1645 | /* Denotes high 16 bits. */ |
| 1646 | input_line_pointer = tic4x_expression (++input_line_pointer, exp); |
| 1647 | if (exp->X_op == O_constant) |
| 1648 | operand->mode = M_IMMED; |
| 1649 | else if (exp->X_op == O_big) |
| 1650 | { |
| 1651 | if (exp->X_add_number) |
| 1652 | as_bad ("Number too large"); /* bignum required */ |
| 1653 | else |
| 1654 | { |
| 1655 | tic4x_gen_to_words (generic_floating_point_number, |
| 1656 | operand->fwords, S_PRECISION); |
| 1657 | operand->mode = M_IMMED_F; |
| 1658 | } |
| 1659 | } |
| 1660 | /* Allow ori ^foo, ar0 to be equivalent to ldi .hi.foo, ar0 */ |
| 1661 | /* WARNING : The TI C40 assembler cannot do this. */ |
| 1662 | else if (exp->X_op == O_symbol) |
| 1663 | { |
| 1664 | operand->mode = M_HI; |
| 1665 | break; |
| 1666 | } |
| 1667 | |
| 1668 | case '#': |
| 1669 | input_line_pointer = tic4x_expression (++input_line_pointer, exp); |
| 1670 | if (exp->X_op == O_constant) |
| 1671 | operand->mode = M_IMMED; |
| 1672 | else if (exp->X_op == O_big) |
| 1673 | { |
| 1674 | if (exp->X_add_number > 0) |
| 1675 | as_bad ("Number too large"); /* bignum required. */ |
| 1676 | else |
| 1677 | { |
| 1678 | tic4x_gen_to_words (generic_floating_point_number, |
| 1679 | operand->fwords, S_PRECISION); |
| 1680 | operand->mode = M_IMMED_F; |
| 1681 | } |
| 1682 | } |
| 1683 | /* Allow ori foo, ar0 to be equivalent to ldi .lo.foo, ar0 */ |
| 1684 | /* WARNING : The TI C40 assembler cannot do this. */ |
| 1685 | else if (exp->X_op == O_symbol) |
| 1686 | { |
| 1687 | operand->mode = M_IMMED; |
| 1688 | break; |
| 1689 | } |
| 1690 | |
| 1691 | else |
| 1692 | as_bad ("Expecting a constant value"); |
| 1693 | break; |
| 1694 | case '\\': |
| 1695 | #endif |
| 1696 | case '@': |
| 1697 | input_line_pointer = tic4x_expression (++input_line_pointer, exp); |
| 1698 | if (exp->X_op != O_constant && exp->X_op != O_symbol) |
| 1699 | as_bad ("Bad direct addressing construct %s", s); |
| 1700 | if (exp->X_op == O_constant) |
| 1701 | { |
| 1702 | if (exp->X_add_number < 0) |
| 1703 | as_bad ("Direct value of %ld is not suitable", |
| 1704 | (long) exp->X_add_number); |
| 1705 | } |
| 1706 | operand->mode = M_DIRECT; |
| 1707 | break; |
| 1708 | |
| 1709 | case '*': |
| 1710 | ret = -1; |
| 1711 | for (i = 0; i < tic4x_num_indirects; i++) |
| 1712 | if ((ret = tic4x_indirect_parse (operand, &tic4x_indirects[i]))) |
| 1713 | break; |
| 1714 | if (ret < 0) |
| 1715 | break; |
| 1716 | if (i < tic4x_num_indirects) |
| 1717 | { |
| 1718 | operand->mode = M_INDIRECT; |
| 1719 | /* Indirect addressing mode number. */ |
| 1720 | operand->expr.X_add_number = tic4x_indirects[i].modn; |
| 1721 | /* Convert *+ARn(0) to *ARn etc. Maybe we should |
| 1722 | squeal about silly ones? */ |
| 1723 | if (operand->expr.X_add_number < 0x08 && !operand->disp) |
| 1724 | operand->expr.X_add_number = 0x18; |
| 1725 | } |
| 1726 | else |
| 1727 | as_bad ("Unknown indirect addressing mode"); |
| 1728 | break; |
| 1729 | |
| 1730 | default: |
| 1731 | operand->mode = M_IMMED; /* Assume immediate. */ |
| 1732 | str = input_line_pointer; |
| 1733 | input_line_pointer = tic4x_expression (input_line_pointer, exp); |
| 1734 | if (exp->X_op == O_register) |
| 1735 | { |
| 1736 | know (exp->X_add_symbol == 0); |
| 1737 | know (exp->X_op_symbol == 0); |
| 1738 | operand->mode = M_REGISTER; |
| 1739 | break; |
| 1740 | } |
| 1741 | else if (exp->X_op == O_big) |
| 1742 | { |
| 1743 | if (exp->X_add_number > 0) |
| 1744 | as_bad ("Number too large"); /* bignum required. */ |
| 1745 | else |
| 1746 | { |
| 1747 | tic4x_gen_to_words (generic_floating_point_number, |
| 1748 | operand->fwords, S_PRECISION); |
| 1749 | operand->mode = M_IMMED_F; |
| 1750 | } |
| 1751 | break; |
| 1752 | } |
| 1753 | #ifdef TIC4X_ALT_SYNTAX |
| 1754 | /* Allow ldi foo, ar0 to be equivalent to ldi @foo, ar0. */ |
| 1755 | else if (exp->X_op == O_symbol) |
| 1756 | { |
| 1757 | operand->mode = M_DIRECT; |
| 1758 | break; |
| 1759 | } |
| 1760 | #endif |
| 1761 | } |
| 1762 | if (entry == NULL) |
| 1763 | new = input_line_pointer; |
| 1764 | input_line_pointer = save; |
| 1765 | return new; |
| 1766 | } |
| 1767 | |
| 1768 | static int |
| 1769 | tic4x_operands_match (inst, insn, check) |
| 1770 | tic4x_inst_t *inst; |
| 1771 | tic4x_insn_t *insn; |
| 1772 | int check; |
| 1773 | { |
| 1774 | const char *args = inst->args; |
| 1775 | unsigned long opcode = inst->opcode; |
| 1776 | int num_operands = insn->num_operands; |
| 1777 | tic4x_operand_t *operand = insn->operands; |
| 1778 | expressionS *exp = &operand->expr; |
| 1779 | int ret = 1; |
| 1780 | int reg; |
| 1781 | |
| 1782 | /* Build the opcode, checking as we go to make sure that the |
| 1783 | operands match. |
| 1784 | |
| 1785 | If an operand matches, we modify insn or opcode appropriately, |
| 1786 | and do a "continue". If an operand fails to match, we "break". */ |
| 1787 | |
| 1788 | insn->nchars = 4; /* Instructions always 4 bytes. */ |
| 1789 | insn->reloc = NO_RELOC; |
| 1790 | insn->pcrel = 0; |
| 1791 | |
| 1792 | if (*args == '\0') |
| 1793 | { |
| 1794 | insn->opcode = opcode; |
| 1795 | return num_operands == 0; |
| 1796 | } |
| 1797 | |
| 1798 | for (;; ++args) |
| 1799 | { |
| 1800 | switch (*args) |
| 1801 | { |
| 1802 | |
| 1803 | case '\0': /* End of args. */ |
| 1804 | if (num_operands == 1) |
| 1805 | { |
| 1806 | insn->opcode = opcode; |
| 1807 | return ret; |
| 1808 | } |
| 1809 | break; /* Too many operands. */ |
| 1810 | |
| 1811 | case '#': /* This is only used for ldp. */ |
| 1812 | if (operand->mode != M_DIRECT && operand->mode != M_IMMED) |
| 1813 | break; |
| 1814 | /* While this looks like a direct addressing mode, we actually |
| 1815 | use an immediate mode form of ldiu or ldpk instruction. */ |
| 1816 | if (exp->X_op == O_constant) |
| 1817 | { |
| 1818 | if( ( IS_CPU_TIC4X (tic4x_cpu) && exp->X_add_number <= 65535 ) |
| 1819 | || ( IS_CPU_TIC3X (tic4x_cpu) && exp->X_add_number <= 255 ) ) |
| 1820 | { |
| 1821 | INSERTS (opcode, exp->X_add_number, 15, 0); |
| 1822 | continue; |
| 1823 | } |
| 1824 | else |
| 1825 | { |
| 1826 | if (!check) |
| 1827 | as_bad ("Immediate value of %ld is too large for ldf", |
| 1828 | (long) exp->X_add_number); |
| 1829 | ret = -1; |
| 1830 | continue; |
| 1831 | } |
| 1832 | } |
| 1833 | else if (exp->X_op == O_symbol) |
| 1834 | { |
| 1835 | insn->reloc = BFD_RELOC_HI16; |
| 1836 | insn->exp = *exp; |
| 1837 | continue; |
| 1838 | } |
| 1839 | break; /* Not direct (dp) addressing. */ |
| 1840 | |
| 1841 | case '@': /* direct. */ |
| 1842 | if (operand->mode != M_DIRECT) |
| 1843 | break; |
| 1844 | if (exp->X_op == O_constant) |
| 1845 | { |
| 1846 | /* Store only the 16 LSBs of the number. */ |
| 1847 | INSERTS (opcode, exp->X_add_number, 15, 0); |
| 1848 | continue; |
| 1849 | } |
| 1850 | else if (exp->X_op == O_symbol) |
| 1851 | { |
| 1852 | insn->reloc = BFD_RELOC_LO16; |
| 1853 | insn->exp = *exp; |
| 1854 | continue; |
| 1855 | } |
| 1856 | break; /* Not direct addressing. */ |
| 1857 | |
| 1858 | case 'A': |
| 1859 | if (operand->mode != M_REGISTER) |
| 1860 | break; |
| 1861 | reg = exp->X_add_number; |
| 1862 | if (reg >= REG_AR0 && reg <= REG_AR7) |
| 1863 | INSERTU (opcode, reg - REG_AR0, 24, 22); |
| 1864 | else |
| 1865 | { |
| 1866 | if (!check) |
| 1867 | as_bad ("Destination register must be ARn"); |
| 1868 | ret = -1; |
| 1869 | } |
| 1870 | continue; |
| 1871 | |
| 1872 | case 'B': /* Unsigned integer immediate. */ |
| 1873 | /* Allow br label or br @label. */ |
| 1874 | if (operand->mode != M_IMMED && operand->mode != M_DIRECT) |
| 1875 | break; |
| 1876 | if (exp->X_op == O_constant) |
| 1877 | { |
| 1878 | if (exp->X_add_number < (1 << 24)) |
| 1879 | { |
| 1880 | INSERTU (opcode, exp->X_add_number, 23, 0); |
| 1881 | continue; |
| 1882 | } |
| 1883 | else |
| 1884 | { |
| 1885 | if (!check) |
| 1886 | as_bad ("Immediate value of %ld is too large", |
| 1887 | (long) exp->X_add_number); |
| 1888 | ret = -1; |
| 1889 | continue; |
| 1890 | } |
| 1891 | } |
| 1892 | if (IS_CPU_TIC4X (tic4x_cpu)) |
| 1893 | { |
| 1894 | insn->reloc = BFD_RELOC_24_PCREL; |
| 1895 | insn->pcrel = 1; |
| 1896 | } |
| 1897 | else |
| 1898 | { |
| 1899 | insn->reloc = BFD_RELOC_24; |
| 1900 | insn->pcrel = 0; |
| 1901 | } |
| 1902 | insn->exp = *exp; |
| 1903 | continue; |
| 1904 | |
| 1905 | case 'C': |
| 1906 | if (!IS_CPU_TIC4X (tic4x_cpu)) |
| 1907 | break; |
| 1908 | if (operand->mode != M_INDIRECT) |
| 1909 | break; |
| 1910 | /* Require either *+ARn(disp) or *ARn. */ |
| 1911 | if (operand->expr.X_add_number != 0 |
| 1912 | && operand->expr.X_add_number != 0x18) |
| 1913 | { |
| 1914 | if (!check) |
| 1915 | as_bad ("Invalid indirect addressing mode"); |
| 1916 | ret = -1; |
| 1917 | continue; |
| 1918 | } |
| 1919 | INSERTU (opcode, operand->aregno - REG_AR0, 2, 0); |
| 1920 | INSERTU (opcode, operand->disp, 7, 3); |
| 1921 | continue; |
| 1922 | |
| 1923 | case 'E': |
| 1924 | if (!(operand->mode == M_REGISTER)) |
| 1925 | break; |
| 1926 | INSERTU (opcode, exp->X_add_number, 7, 0); |
| 1927 | continue; |
| 1928 | |
| 1929 | case 'e': |
| 1930 | if (!(operand->mode == M_REGISTER)) |
| 1931 | break; |
| 1932 | reg = exp->X_add_number; |
| 1933 | if ( (reg >= REG_R0 && reg <= REG_R7) |
| 1934 | || (IS_CPU_TIC4X (tic4x_cpu) && reg >= REG_R8 && reg <= REG_R11) ) |
| 1935 | INSERTU (opcode, reg, 7, 0); |
| 1936 | else |
| 1937 | { |
| 1938 | if (!check) |
| 1939 | as_bad ("Register must be Rn"); |
| 1940 | ret = -1; |
| 1941 | } |
| 1942 | continue; |
| 1943 | |
| 1944 | case 'F': |
| 1945 | if (operand->mode != M_IMMED_F |
| 1946 | && !(operand->mode == M_IMMED && exp->X_op == O_constant)) |
| 1947 | break; |
| 1948 | |
| 1949 | if (operand->mode != M_IMMED_F) |
| 1950 | { |
| 1951 | /* OK, we 've got something like cmpf 0, r0 |
| 1952 | Why can't they stick in a bloody decimal point ?! */ |
| 1953 | char string[16]; |
| 1954 | |
| 1955 | /* Create floating point number string. */ |
| 1956 | sprintf (string, "%d.0", (int) exp->X_add_number); |
| 1957 | tic4x_atof (string, 's', operand->fwords); |
| 1958 | } |
| 1959 | |
| 1960 | INSERTU (opcode, operand->fwords[0], 15, 0); |
| 1961 | continue; |
| 1962 | |
| 1963 | case 'G': |
| 1964 | if (operand->mode != M_REGISTER) |
| 1965 | break; |
| 1966 | INSERTU (opcode, exp->X_add_number, 15, 8); |
| 1967 | continue; |
| 1968 | |
| 1969 | case 'g': |
| 1970 | if (operand->mode != M_REGISTER) |
| 1971 | break; |
| 1972 | reg = exp->X_add_number; |
| 1973 | if ( (reg >= REG_R0 && reg <= REG_R7) |
| 1974 | || (IS_CPU_TIC4X (tic4x_cpu) && reg >= REG_R8 && reg <= REG_R11) ) |
| 1975 | INSERTU (opcode, reg, 15, 8); |
| 1976 | else |
| 1977 | { |
| 1978 | if (!check) |
| 1979 | as_bad ("Register must be Rn"); |
| 1980 | ret = -1; |
| 1981 | } |
| 1982 | continue; |
| 1983 | |
| 1984 | case 'H': |
| 1985 | if (operand->mode != M_REGISTER) |
| 1986 | break; |
| 1987 | reg = exp->X_add_number; |
| 1988 | if (reg >= REG_R0 && reg <= REG_R7) |
| 1989 | INSERTU (opcode, reg - REG_R0, 18, 16); |
| 1990 | else |
| 1991 | { |
| 1992 | if (!check) |
| 1993 | as_bad ("Register must be R0--R7"); |
| 1994 | ret = -1; |
| 1995 | } |
| 1996 | continue; |
| 1997 | |
| 1998 | case 'i': |
| 1999 | if ( operand->mode == M_REGISTER |
| 2000 | && tic4x_oplevel & OP_ENH ) |
| 2001 | { |
| 2002 | reg = exp->X_add_number; |
| 2003 | INSERTU (opcode, reg, 4, 0); |
| 2004 | INSERTU (opcode, 7, 7, 5); |
| 2005 | continue; |
| 2006 | } |
| 2007 | /* Fallthrough */ |
| 2008 | |
| 2009 | case 'I': |
| 2010 | if (operand->mode != M_INDIRECT) |
| 2011 | break; |
| 2012 | if (operand->disp != 0 && operand->disp != 1) |
| 2013 | { |
| 2014 | if (IS_CPU_TIC4X (tic4x_cpu)) |
| 2015 | break; |
| 2016 | if (!check) |
| 2017 | as_bad ("Invalid indirect addressing mode displacement %d", |
| 2018 | operand->disp); |
| 2019 | ret = -1; |
| 2020 | continue; |
| 2021 | } |
| 2022 | INSERTU (opcode, operand->aregno - REG_AR0, 2, 0); |
| 2023 | INSERTU (opcode, operand->expr.X_add_number, 7, 3); |
| 2024 | continue; |
| 2025 | |
| 2026 | case 'j': |
| 2027 | if ( operand->mode == M_REGISTER |
| 2028 | && tic4x_oplevel & OP_ENH ) |
| 2029 | { |
| 2030 | reg = exp->X_add_number; |
| 2031 | INSERTU (opcode, reg, 12, 8); |
| 2032 | INSERTU (opcode, 7, 15, 13); |
| 2033 | continue; |
| 2034 | } |
| 2035 | /* Fallthrough */ |
| 2036 | |
| 2037 | case 'J': |
| 2038 | if (operand->mode != M_INDIRECT) |
| 2039 | break; |
| 2040 | if (operand->disp != 0 && operand->disp != 1) |
| 2041 | { |
| 2042 | if (IS_CPU_TIC4X (tic4x_cpu)) |
| 2043 | break; |
| 2044 | if (!check) |
| 2045 | as_bad ("Invalid indirect addressing mode displacement %d", |
| 2046 | operand->disp); |
| 2047 | ret = -1; |
| 2048 | continue; |
| 2049 | } |
| 2050 | INSERTU (opcode, operand->aregno - REG_AR0, 10, 8); |
| 2051 | INSERTU (opcode, operand->expr.X_add_number, 15, 11); |
| 2052 | continue; |
| 2053 | |
| 2054 | case 'K': |
| 2055 | if (operand->mode != M_REGISTER) |
| 2056 | break; |
| 2057 | reg = exp->X_add_number; |
| 2058 | if (reg >= REG_R0 && reg <= REG_R7) |
| 2059 | INSERTU (opcode, reg - REG_R0, 21, 19); |
| 2060 | else |
| 2061 | { |
| 2062 | if (!check) |
| 2063 | as_bad ("Register must be R0--R7"); |
| 2064 | ret = -1; |
| 2065 | } |
| 2066 | continue; |
| 2067 | |
| 2068 | case 'L': |
| 2069 | if (operand->mode != M_REGISTER) |
| 2070 | break; |
| 2071 | reg = exp->X_add_number; |
| 2072 | if (reg >= REG_R0 && reg <= REG_R7) |
| 2073 | INSERTU (opcode, reg - REG_R0, 24, 22); |
| 2074 | else |
| 2075 | { |
| 2076 | if (!check) |
| 2077 | as_bad ("Register must be R0--R7"); |
| 2078 | ret = -1; |
| 2079 | } |
| 2080 | continue; |
| 2081 | |
| 2082 | case 'M': |
| 2083 | if (operand->mode != M_REGISTER) |
| 2084 | break; |
| 2085 | reg = exp->X_add_number; |
| 2086 | if (reg == REG_R2 || reg == REG_R3) |
| 2087 | INSERTU (opcode, reg - REG_R2, 22, 22); |
| 2088 | else |
| 2089 | { |
| 2090 | if (!check) |
| 2091 | as_bad ("Destination register must be R2 or R3"); |
| 2092 | ret = -1; |
| 2093 | } |
| 2094 | continue; |
| 2095 | |
| 2096 | case 'N': |
| 2097 | if (operand->mode != M_REGISTER) |
| 2098 | break; |
| 2099 | reg = exp->X_add_number; |
| 2100 | if (reg == REG_R0 || reg == REG_R1) |
| 2101 | INSERTU (opcode, reg - REG_R0, 23, 23); |
| 2102 | else |
| 2103 | { |
| 2104 | if (!check) |
| 2105 | as_bad ("Destination register must be R0 or R1"); |
| 2106 | ret = -1; |
| 2107 | } |
| 2108 | continue; |
| 2109 | |
| 2110 | case 'O': |
| 2111 | if (!IS_CPU_TIC4X (tic4x_cpu)) |
| 2112 | break; |
| 2113 | if (operand->mode != M_INDIRECT) |
| 2114 | break; |
| 2115 | /* Require either *+ARn(disp) or *ARn. */ |
| 2116 | if (operand->expr.X_add_number != 0 |
| 2117 | && operand->expr.X_add_number != 0x18) |
| 2118 | { |
| 2119 | if (!check) |
| 2120 | as_bad ("Invalid indirect addressing mode"); |
| 2121 | ret = -1; |
| 2122 | continue; |
| 2123 | } |
| 2124 | INSERTU (opcode, operand->aregno - REG_AR0, 10, 8); |
| 2125 | INSERTU (opcode, operand->disp, 15, 11); |
| 2126 | continue; |
| 2127 | |
| 2128 | case 'P': /* PC relative displacement. */ |
| 2129 | /* Allow br label or br @label. */ |
| 2130 | if (operand->mode != M_IMMED && operand->mode != M_DIRECT) |
| 2131 | break; |
| 2132 | if (exp->X_op == O_constant) |
| 2133 | { |
| 2134 | if (exp->X_add_number >= -32768 && exp->X_add_number <= 32767) |
| 2135 | { |
| 2136 | INSERTS (opcode, exp->X_add_number, 15, 0); |
| 2137 | continue; |
| 2138 | } |
| 2139 | else |
| 2140 | { |
| 2141 | if (!check) |
| 2142 | as_bad ("Displacement value of %ld is too large", |
| 2143 | (long) exp->X_add_number); |
| 2144 | ret = -1; |
| 2145 | continue; |
| 2146 | } |
| 2147 | } |
| 2148 | insn->reloc = BFD_RELOC_16_PCREL; |
| 2149 | insn->pcrel = 1; |
| 2150 | insn->exp = *exp; |
| 2151 | continue; |
| 2152 | |
| 2153 | case 'Q': |
| 2154 | if (operand->mode != M_REGISTER) |
| 2155 | break; |
| 2156 | reg = exp->X_add_number; |
| 2157 | INSERTU (opcode, reg, 15, 0); |
| 2158 | continue; |
| 2159 | |
| 2160 | case 'q': |
| 2161 | if (operand->mode != M_REGISTER) |
| 2162 | break; |
| 2163 | reg = exp->X_add_number; |
| 2164 | if ( (reg >= REG_R0 && reg <= REG_R7) |
| 2165 | || (IS_CPU_TIC4X (tic4x_cpu) && reg >= REG_R8 && reg <= REG_R11) ) |
| 2166 | INSERTU (opcode, reg, 15, 0); |
| 2167 | else |
| 2168 | { |
| 2169 | if (!check) |
| 2170 | as_bad ("Register must be Rn"); |
| 2171 | ret = -1; |
| 2172 | } |
| 2173 | continue; |
| 2174 | |
| 2175 | case 'R': |
| 2176 | if (operand->mode != M_REGISTER) |
| 2177 | break; |
| 2178 | reg = exp->X_add_number; |
| 2179 | INSERTU (opcode, reg, 20, 16); |
| 2180 | continue; |
| 2181 | |
| 2182 | case 'r': |
| 2183 | if (operand->mode != M_REGISTER) |
| 2184 | break; |
| 2185 | reg = exp->X_add_number; |
| 2186 | if ( (reg >= REG_R0 && reg <= REG_R7) |
| 2187 | || (IS_CPU_TIC4X (tic4x_cpu) && reg >= REG_R8 && reg <= REG_R11) ) |
| 2188 | INSERTU (opcode, reg, 20, 16); |
| 2189 | else |
| 2190 | { |
| 2191 | if (!check) |
| 2192 | as_bad ("Register must be Rn"); |
| 2193 | ret = -1; |
| 2194 | } |
| 2195 | continue; |
| 2196 | |
| 2197 | case 'S': /* Short immediate int. */ |
| 2198 | if (operand->mode != M_IMMED && operand->mode != M_HI) |
| 2199 | break; |
| 2200 | if (exp->X_op == O_big) |
| 2201 | { |
| 2202 | if (!check) |
| 2203 | as_bad ("Floating point number not valid in expression"); |
| 2204 | ret = -1; |
| 2205 | continue; |
| 2206 | } |
| 2207 | if (exp->X_op == O_constant) |
| 2208 | { |
| 2209 | if (exp->X_add_number >= -32768 && exp->X_add_number <= 65535) |
| 2210 | { |
| 2211 | INSERTS (opcode, exp->X_add_number, 15, 0); |
| 2212 | continue; |
| 2213 | } |
| 2214 | else |
| 2215 | { |
| 2216 | if (!check) |
| 2217 | as_bad ("Signed immediate value %ld too large", |
| 2218 | (long) exp->X_add_number); |
| 2219 | ret = -1; |
| 2220 | continue; |
| 2221 | } |
| 2222 | } |
| 2223 | else if (exp->X_op == O_symbol) |
| 2224 | { |
| 2225 | if (operand->mode == M_HI) |
| 2226 | { |
| 2227 | insn->reloc = BFD_RELOC_HI16; |
| 2228 | } |
| 2229 | else |
| 2230 | { |
| 2231 | insn->reloc = BFD_RELOC_LO16; |
| 2232 | } |
| 2233 | insn->exp = *exp; |
| 2234 | continue; |
| 2235 | } |
| 2236 | /* Handle cases like ldi foo - $, ar0 where foo |
| 2237 | is a forward reference. Perhaps we should check |
| 2238 | for X_op == O_symbol and disallow things like |
| 2239 | ldi foo, ar0. */ |
| 2240 | insn->reloc = BFD_RELOC_16; |
| 2241 | insn->exp = *exp; |
| 2242 | continue; |
| 2243 | |
| 2244 | case 'T': /* 5-bit immediate value for tic4x stik. */ |
| 2245 | if (!IS_CPU_TIC4X (tic4x_cpu)) |
| 2246 | break; |
| 2247 | if (operand->mode != M_IMMED) |
| 2248 | break; |
| 2249 | if (exp->X_op == O_constant) |
| 2250 | { |
| 2251 | if (exp->X_add_number < 16 && exp->X_add_number >= -16) |
| 2252 | { |
| 2253 | INSERTS (opcode, exp->X_add_number, 20, 16); |
| 2254 | continue; |
| 2255 | } |
| 2256 | else |
| 2257 | { |
| 2258 | if (!check) |
| 2259 | as_bad ("Immediate value of %ld is too large", |
| 2260 | (long) exp->X_add_number); |
| 2261 | ret = -1; |
| 2262 | continue; |
| 2263 | } |
| 2264 | } |
| 2265 | break; /* No relocations allowed. */ |
| 2266 | |
| 2267 | case 'U': /* Unsigned integer immediate. */ |
| 2268 | if (operand->mode != M_IMMED && operand->mode != M_HI) |
| 2269 | break; |
| 2270 | if (exp->X_op == O_constant) |
| 2271 | { |
| 2272 | if (exp->X_add_number < (1 << 16) && exp->X_add_number >= 0) |
| 2273 | { |
| 2274 | INSERTU (opcode, exp->X_add_number, 15, 0); |
| 2275 | continue; |
| 2276 | } |
| 2277 | else |
| 2278 | { |
| 2279 | if (!check) |
| 2280 | as_bad ("Unsigned immediate value %ld too large", |
| 2281 | (long) exp->X_add_number); |
| 2282 | ret = -1; |
| 2283 | continue; |
| 2284 | } |
| 2285 | } |
| 2286 | else if (exp->X_op == O_symbol) |
| 2287 | { |
| 2288 | if (operand->mode == M_HI) |
| 2289 | insn->reloc = BFD_RELOC_HI16; |
| 2290 | else |
| 2291 | insn->reloc = BFD_RELOC_LO16; |
| 2292 | |
| 2293 | insn->exp = *exp; |
| 2294 | continue; |
| 2295 | } |
| 2296 | insn->reloc = BFD_RELOC_16; |
| 2297 | insn->exp = *exp; |
| 2298 | continue; |
| 2299 | |
| 2300 | case 'V': /* Trap numbers (immediate field). */ |
| 2301 | if (operand->mode != M_IMMED) |
| 2302 | break; |
| 2303 | if (exp->X_op == O_constant) |
| 2304 | { |
| 2305 | if (exp->X_add_number < 512 && IS_CPU_TIC4X (tic4x_cpu)) |
| 2306 | { |
| 2307 | INSERTU (opcode, exp->X_add_number, 8, 0); |
| 2308 | continue; |
| 2309 | } |
| 2310 | else if (exp->X_add_number < 32 && IS_CPU_TIC3X (tic4x_cpu)) |
| 2311 | { |
| 2312 | INSERTU (opcode, exp->X_add_number | 0x20, 4, 0); |
| 2313 | continue; |
| 2314 | } |
| 2315 | else |
| 2316 | { |
| 2317 | if (!check) |
| 2318 | as_bad ("Immediate value of %ld is too large", |
| 2319 | (long) exp->X_add_number); |
| 2320 | ret = -1; |
| 2321 | continue; |
| 2322 | } |
| 2323 | } |
| 2324 | break; /* No relocations allowed. */ |
| 2325 | |
| 2326 | case 'W': /* Short immediate int (0--7). */ |
| 2327 | if (!IS_CPU_TIC4X (tic4x_cpu)) |
| 2328 | break; |
| 2329 | if (operand->mode != M_IMMED) |
| 2330 | break; |
| 2331 | if (exp->X_op == O_big) |
| 2332 | { |
| 2333 | if (!check) |
| 2334 | as_bad ("Floating point number not valid in expression"); |
| 2335 | ret = -1; |
| 2336 | continue; |
| 2337 | } |
| 2338 | if (exp->X_op == O_constant) |
| 2339 | { |
| 2340 | if (exp->X_add_number >= -256 && exp->X_add_number <= 127) |
| 2341 | { |
| 2342 | INSERTS (opcode, exp->X_add_number, 7, 0); |
| 2343 | continue; |
| 2344 | } |
| 2345 | else |
| 2346 | { |
| 2347 | if (!check) |
| 2348 | as_bad ("Immediate value %ld too large", |
| 2349 | (long) exp->X_add_number); |
| 2350 | ret = -1; |
| 2351 | continue; |
| 2352 | } |
| 2353 | } |
| 2354 | insn->reloc = BFD_RELOC_16; |
| 2355 | insn->exp = *exp; |
| 2356 | continue; |
| 2357 | |
| 2358 | case 'X': /* Expansion register for tic4x. */ |
| 2359 | if (operand->mode != M_REGISTER) |
| 2360 | break; |
| 2361 | reg = exp->X_add_number; |
| 2362 | if (reg >= REG_IVTP && reg <= REG_TVTP) |
| 2363 | INSERTU (opcode, reg - REG_IVTP, 4, 0); |
| 2364 | else |
| 2365 | { |
| 2366 | if (!check) |
| 2367 | as_bad ("Register must be ivtp or tvtp"); |
| 2368 | ret = -1; |
| 2369 | } |
| 2370 | continue; |
| 2371 | |
| 2372 | case 'Y': /* Address register for tic4x lda. */ |
| 2373 | if (operand->mode != M_REGISTER) |
| 2374 | break; |
| 2375 | reg = exp->X_add_number; |
| 2376 | if (reg >= REG_AR0 && reg <= REG_SP) |
| 2377 | INSERTU (opcode, reg, 20, 16); |
| 2378 | else |
| 2379 | { |
| 2380 | if (!check) |
| 2381 | as_bad ("Register must be address register"); |
| 2382 | ret = -1; |
| 2383 | } |
| 2384 | continue; |
| 2385 | |
| 2386 | case 'Z': /* Expansion register for tic4x. */ |
| 2387 | if (operand->mode != M_REGISTER) |
| 2388 | break; |
| 2389 | reg = exp->X_add_number; |
| 2390 | if (reg >= REG_IVTP && reg <= REG_TVTP) |
| 2391 | INSERTU (opcode, reg - REG_IVTP, 20, 16); |
| 2392 | else |
| 2393 | { |
| 2394 | if (!check) |
| 2395 | as_bad ("Register must be ivtp or tvtp"); |
| 2396 | ret = -1; |
| 2397 | } |
| 2398 | continue; |
| 2399 | |
| 2400 | case '*': |
| 2401 | if (operand->mode != M_INDIRECT) |
| 2402 | break; |
| 2403 | INSERTS (opcode, operand->disp, 7, 0); |
| 2404 | INSERTU (opcode, operand->aregno - REG_AR0, 10, 8); |
| 2405 | INSERTU (opcode, operand->expr.X_add_number, 15, 11); |
| 2406 | continue; |
| 2407 | |
| 2408 | case '|': /* treat as `,' if have ldi_ldi form. */ |
| 2409 | if (insn->parallel) |
| 2410 | { |
| 2411 | if (--num_operands < 0) |
| 2412 | break; /* Too few operands. */ |
| 2413 | operand++; |
| 2414 | if (operand->mode != M_PARALLEL) |
| 2415 | break; |
| 2416 | } |
| 2417 | /* Fall through. */ |
| 2418 | |
| 2419 | case ',': /* Another operand. */ |
| 2420 | if (--num_operands < 0) |
| 2421 | break; /* Too few operands. */ |
| 2422 | operand++; |
| 2423 | exp = &operand->expr; |
| 2424 | continue; |
| 2425 | |
| 2426 | case ';': /* Another optional operand. */ |
| 2427 | if (num_operands == 1 || operand[1].mode == M_PARALLEL) |
| 2428 | continue; |
| 2429 | if (--num_operands < 0) |
| 2430 | break; /* Too few operands. */ |
| 2431 | operand++; |
| 2432 | exp = &operand->expr; |
| 2433 | continue; |
| 2434 | |
| 2435 | default: |
| 2436 | BAD_CASE (*args); |
| 2437 | } |
| 2438 | return 0; |
| 2439 | } |
| 2440 | } |
| 2441 | |
| 2442 | static void |
| 2443 | tic4x_insn_check (insn) |
| 2444 | tic4x_insn_t *insn; |
| 2445 | { |
| 2446 | |
| 2447 | if (!strcmp(insn->name, "lda")) |
| 2448 | { |
| 2449 | if (insn->num_operands < 2 || insn->num_operands > 2) |
| 2450 | as_fatal ("Illegal internal LDA insn definition"); |
| 2451 | |
| 2452 | if ( insn->operands[0].mode == M_REGISTER |
| 2453 | && insn->operands[1].mode == M_REGISTER |
| 2454 | && insn->operands[0].expr.X_add_number == insn->operands[1].expr.X_add_number ) |
| 2455 | as_bad ("Source and destination register should not be equal"); |
| 2456 | } |
| 2457 | else if( !strcmp(insn->name, "ldi_ldi") |
| 2458 | || !strcmp(insn->name, "ldi1_ldi2") |
| 2459 | || !strcmp(insn->name, "ldi2_ldi1") |
| 2460 | || !strcmp(insn->name, "ldf_ldf") |
| 2461 | || !strcmp(insn->name, "ldf1_ldf2") |
| 2462 | || !strcmp(insn->name, "ldf2_ldf1") ) |
| 2463 | { |
| 2464 | if ( insn->num_operands < 4 && insn->num_operands > 5 ) |
| 2465 | as_fatal ("Illegal internal %s insn definition", insn->name); |
| 2466 | |
| 2467 | if ( insn->operands[1].mode == M_REGISTER |
| 2468 | && insn->operands[insn->num_operands-1].mode == M_REGISTER |
| 2469 | && insn->operands[1].expr.X_add_number == insn->operands[insn->num_operands-1].expr.X_add_number ) |
| 2470 | as_warn ("Equal parallell destination registers, one result will be discarded"); |
| 2471 | } |
| 2472 | } |
| 2473 | |
| 2474 | static void |
| 2475 | tic4x_insn_output (insn) |
| 2476 | tic4x_insn_t *insn; |
| 2477 | { |
| 2478 | char *dst; |
| 2479 | |
| 2480 | /* Grab another fragment for opcode. */ |
| 2481 | dst = frag_more (insn->nchars); |
| 2482 | |
| 2483 | /* Put out opcode word as a series of bytes in little endian order. */ |
| 2484 | md_number_to_chars (dst, insn->opcode, insn->nchars); |
| 2485 | |
| 2486 | /* Put out the symbol-dependent stuff. */ |
| 2487 | if (insn->reloc != NO_RELOC) |
| 2488 | { |
| 2489 | /* Where is the offset into the fragment for this instruction. */ |
| 2490 | fix_new_exp (frag_now, |
| 2491 | dst - frag_now->fr_literal, /* where */ |
| 2492 | insn->nchars, /* size */ |
| 2493 | &insn->exp, |
| 2494 | insn->pcrel, |
| 2495 | insn->reloc); |
| 2496 | } |
| 2497 | } |
| 2498 | |
| 2499 | /* Parse the operands. */ |
| 2500 | int |
| 2501 | tic4x_operands_parse (s, operands, num_operands) |
| 2502 | char *s; |
| 2503 | tic4x_operand_t *operands; |
| 2504 | int num_operands; |
| 2505 | { |
| 2506 | if (!*s) |
| 2507 | return num_operands; |
| 2508 | |
| 2509 | do |
| 2510 | s = tic4x_operand_parse (s, &operands[num_operands++]); |
| 2511 | while (num_operands < TIC4X_OPERANDS_MAX && *s++ == ','); |
| 2512 | |
| 2513 | if (num_operands > TIC4X_OPERANDS_MAX) |
| 2514 | { |
| 2515 | as_bad ("Too many operands scanned"); |
| 2516 | return -1; |
| 2517 | } |
| 2518 | return num_operands; |
| 2519 | } |
| 2520 | |
| 2521 | /* Assemble a single instruction. Its label has already been handled |
| 2522 | by the generic front end. We just parse mnemonic and operands, and |
| 2523 | produce the bytes of data and relocation. */ |
| 2524 | void |
| 2525 | md_assemble (str) |
| 2526 | char *str; |
| 2527 | { |
| 2528 | int ok = 0; |
| 2529 | char *s; |
| 2530 | int i; |
| 2531 | int parsed = 0; |
| 2532 | tic4x_inst_t *inst; /* Instruction template. */ |
| 2533 | tic4x_inst_t *first_inst; |
| 2534 | |
| 2535 | /* Scan for parallel operators */ |
| 2536 | if (str) |
| 2537 | { |
| 2538 | s = str; |
| 2539 | while (*s && *s != '|') |
| 2540 | s++; |
| 2541 | |
| 2542 | if (*s && s[1]=='|') |
| 2543 | { |
| 2544 | if(insn->parallel) |
| 2545 | { |
| 2546 | as_bad ("Parallel opcode cannot contain more than two instructions"); |
| 2547 | insn->parallel = 0; |
| 2548 | insn->in_use = 0; |
| 2549 | return; |
| 2550 | } |
| 2551 | |
| 2552 | /* Lets take care of the first part of the parallel insn */ |
| 2553 | *s++ = 0; |
| 2554 | md_assemble(str); |
| 2555 | insn->parallel = 1; |
| 2556 | str = ++s; |
| 2557 | /* .. and let the second run though here */ |
| 2558 | } |
| 2559 | } |
| 2560 | |
| 2561 | if (str && insn->parallel) |
| 2562 | { |
| 2563 | /* Find mnemonic (second part of parallel instruction). */ |
| 2564 | s = str; |
| 2565 | /* Skip past instruction mnemonic. */ |
| 2566 | while (*s && *s != ' ') |
| 2567 | s++; |
| 2568 | if (*s) /* Null terminate for hash_find. */ |
| 2569 | *s++ = '\0'; /* and skip past null. */ |
| 2570 | strcat (insn->name, "_"); |
| 2571 | strncat (insn->name, str, TIC4X_NAME_MAX - strlen (insn->name)); |
| 2572 | |
| 2573 | insn->operands[insn->num_operands++].mode = M_PARALLEL; |
| 2574 | |
| 2575 | if ((i = tic4x_operands_parse |
| 2576 | (s, insn->operands, insn->num_operands)) < 0) |
| 2577 | { |
| 2578 | insn->parallel = 0; |
| 2579 | insn->in_use = 0; |
| 2580 | return; |
| 2581 | } |
| 2582 | insn->num_operands = i; |
| 2583 | parsed = 1; |
| 2584 | } |
| 2585 | |
| 2586 | if (insn->in_use) |
| 2587 | { |
| 2588 | if ((insn->inst = (struct tic4x_inst *) |
| 2589 | hash_find (tic4x_op_hash, insn->name)) == NULL) |
| 2590 | { |
| 2591 | as_bad ("Unknown opcode `%s'.", insn->name); |
| 2592 | insn->parallel = 0; |
| 2593 | insn->in_use = 0; |
| 2594 | return; |
| 2595 | } |
| 2596 | |
| 2597 | inst = insn->inst; |
| 2598 | first_inst = NULL; |
| 2599 | do |
| 2600 | { |
| 2601 | ok = tic4x_operands_match (inst, insn, 1); |
| 2602 | if (ok < 0) |
| 2603 | { |
| 2604 | if (!first_inst) |
| 2605 | first_inst = inst; |
| 2606 | ok = 0; |
| 2607 | } |
| 2608 | } while (!ok && !strcmp (inst->name, inst[1].name) && inst++); |
| 2609 | |
| 2610 | if (ok > 0) |
| 2611 | { |
| 2612 | tic4x_insn_check (insn); |
| 2613 | tic4x_insn_output (insn); |
| 2614 | } |
| 2615 | else if (!ok) |
| 2616 | { |
| 2617 | if (first_inst) |
| 2618 | tic4x_operands_match (first_inst, insn, 0); |
| 2619 | as_bad ("Invalid operands for %s", insn->name); |
| 2620 | } |
| 2621 | else |
| 2622 | as_bad ("Invalid instruction %s", insn->name); |
| 2623 | } |
| 2624 | |
| 2625 | if (str && !parsed) |
| 2626 | { |
| 2627 | /* Find mnemonic. */ |
| 2628 | s = str; |
| 2629 | while (*s && *s != ' ') /* Skip past instruction mnemonic. */ |
| 2630 | s++; |
| 2631 | if (*s) /* Null terminate for hash_find. */ |
| 2632 | *s++ = '\0'; /* and skip past null. */ |
| 2633 | strncpy (insn->name, str, TIC4X_NAME_MAX - 3); |
| 2634 | |
| 2635 | if ((i = tic4x_operands_parse (s, insn->operands, 0)) < 0) |
| 2636 | { |
| 2637 | insn->inst = NULL; /* Flag that error occurred. */ |
| 2638 | insn->parallel = 0; |
| 2639 | insn->in_use = 0; |
| 2640 | return; |
| 2641 | } |
| 2642 | insn->num_operands = i; |
| 2643 | insn->in_use = 1; |
| 2644 | } |
| 2645 | else |
| 2646 | insn->in_use = 0; |
| 2647 | insn->parallel = 0; |
| 2648 | } |
| 2649 | |
| 2650 | void |
| 2651 | tic4x_cleanup () |
| 2652 | { |
| 2653 | if (insn->in_use) |
| 2654 | md_assemble (NULL); |
| 2655 | } |
| 2656 | |
| 2657 | /* Turn a string in input_line_pointer into a floating point constant |
| 2658 | of type type, and store the appropriate bytes in *litP. The number |
| 2659 | of chars emitted is stored in *sizeP. An error message is |
| 2660 | returned, or NULL on OK. */ |
| 2661 | |
| 2662 | char * |
| 2663 | md_atof (int type, char *litP, int *sizeP) |
| 2664 | { |
| 2665 | int prec; |
| 2666 | int ieee; |
| 2667 | LITTLENUM_TYPE words[MAX_LITTLENUMS]; |
| 2668 | LITTLENUM_TYPE *wordP; |
| 2669 | char *t; |
| 2670 | |
| 2671 | switch (type) |
| 2672 | { |
| 2673 | case 's': /* .single */ |
| 2674 | case 'S': |
| 2675 | ieee = 0; |
| 2676 | prec = 1; |
| 2677 | break; |
| 2678 | |
| 2679 | case 'd': /* .double */ |
| 2680 | case 'D': |
| 2681 | case 'f': /* .float */ |
| 2682 | case 'F': |
| 2683 | ieee = 0; |
| 2684 | prec = 2; /* 1 32-bit word */ |
| 2685 | break; |
| 2686 | |
| 2687 | case 'i': /* .ieee */ |
| 2688 | case 'I': |
| 2689 | prec = 2; |
| 2690 | ieee = 1; |
| 2691 | type = 'f'; /* Rewrite type to be usable by atof_ieee(). */ |
| 2692 | break; |
| 2693 | |
| 2694 | case 'e': /* .ldouble */ |
| 2695 | case 'E': |
| 2696 | prec = 4; /* 2 32-bit words */ |
| 2697 | ieee = 0; |
| 2698 | break; |
| 2699 | |
| 2700 | default: |
| 2701 | *sizeP = 0; |
| 2702 | return _("Unrecognized or unsupported floating point constant"); |
| 2703 | } |
| 2704 | |
| 2705 | if (ieee) |
| 2706 | t = atof_ieee (input_line_pointer, type, words); |
| 2707 | else |
| 2708 | t = tic4x_atof (input_line_pointer, type, words); |
| 2709 | if (t) |
| 2710 | input_line_pointer = t; |
| 2711 | *sizeP = prec * sizeof (LITTLENUM_TYPE); |
| 2712 | |
| 2713 | /* This loops outputs the LITTLENUMs in REVERSE order; in accord with |
| 2714 | little endian byte order. */ |
| 2715 | /* SES: However it is required to put the words (32-bits) out in the |
| 2716 | correct order, hence we write 2 and 2 littlenums in little endian |
| 2717 | order, while we keep the original order on successive words. */ |
| 2718 | for (wordP = words; wordP<(words+prec) ; wordP+=2) |
| 2719 | { |
| 2720 | if (wordP < (words + prec - 1)) /* Dump wordP[1] (if we have one). */ |
| 2721 | { |
| 2722 | md_number_to_chars (litP, (valueT) (wordP[1]), |
| 2723 | sizeof (LITTLENUM_TYPE)); |
| 2724 | litP += sizeof (LITTLENUM_TYPE); |
| 2725 | } |
| 2726 | |
| 2727 | /* Dump wordP[0] */ |
| 2728 | md_number_to_chars (litP, (valueT) (wordP[0]), |
| 2729 | sizeof (LITTLENUM_TYPE)); |
| 2730 | litP += sizeof (LITTLENUM_TYPE); |
| 2731 | } |
| 2732 | return NULL; |
| 2733 | } |
| 2734 | |
| 2735 | void |
| 2736 | md_apply_fix (fixP, value, seg) |
| 2737 | fixS *fixP; |
| 2738 | valueT *value; |
| 2739 | segT seg ATTRIBUTE_UNUSED; |
| 2740 | { |
| 2741 | char *buf = fixP->fx_where + fixP->fx_frag->fr_literal; |
| 2742 | valueT val = *value; |
| 2743 | |
| 2744 | switch (fixP->fx_r_type) |
| 2745 | { |
| 2746 | case BFD_RELOC_HI16: |
| 2747 | val >>= 16; |
| 2748 | break; |
| 2749 | |
| 2750 | case BFD_RELOC_LO16: |
| 2751 | val &= 0xffff; |
| 2752 | break; |
| 2753 | default: |
| 2754 | break; |
| 2755 | } |
| 2756 | |
| 2757 | switch (fixP->fx_r_type) |
| 2758 | { |
| 2759 | case BFD_RELOC_32: |
| 2760 | buf[3] = val >> 24; |
| 2761 | case BFD_RELOC_24: |
| 2762 | case BFD_RELOC_24_PCREL: |
| 2763 | buf[2] = val >> 16; |
| 2764 | case BFD_RELOC_16: |
| 2765 | case BFD_RELOC_16_PCREL: |
| 2766 | case BFD_RELOC_LO16: |
| 2767 | case BFD_RELOC_HI16: |
| 2768 | buf[1] = val >> 8; |
| 2769 | buf[0] = val; |
| 2770 | break; |
| 2771 | |
| 2772 | case NO_RELOC: |
| 2773 | default: |
| 2774 | as_bad ("Bad relocation type: 0x%02x", fixP->fx_r_type); |
| 2775 | break; |
| 2776 | } |
| 2777 | |
| 2778 | if (fixP->fx_addsy == NULL && fixP->fx_pcrel == 0) fixP->fx_done = 1; |
| 2779 | } |
| 2780 | |
| 2781 | /* Should never be called for tic4x. */ |
| 2782 | void |
| 2783 | md_convert_frag (headers, sec, fragP) |
| 2784 | bfd *headers ATTRIBUTE_UNUSED; |
| 2785 | segT sec ATTRIBUTE_UNUSED; |
| 2786 | fragS *fragP ATTRIBUTE_UNUSED; |
| 2787 | { |
| 2788 | as_fatal ("md_convert_frag"); |
| 2789 | } |
| 2790 | |
| 2791 | /* Should never be called for tic4x. */ |
| 2792 | void |
| 2793 | md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol) |
| 2794 | char *ptr ATTRIBUTE_UNUSED; |
| 2795 | addressT from_addr ATTRIBUTE_UNUSED; |
| 2796 | addressT to_addr ATTRIBUTE_UNUSED; |
| 2797 | fragS *frag ATTRIBUTE_UNUSED; |
| 2798 | symbolS *to_symbol ATTRIBUTE_UNUSED; |
| 2799 | { |
| 2800 | as_fatal ("md_create_short_jmp\n"); |
| 2801 | } |
| 2802 | |
| 2803 | /* Should never be called for tic4x. */ |
| 2804 | void |
| 2805 | md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol) |
| 2806 | char *ptr ATTRIBUTE_UNUSED; |
| 2807 | addressT from_addr ATTRIBUTE_UNUSED; |
| 2808 | addressT to_addr ATTRIBUTE_UNUSED; |
| 2809 | fragS *frag ATTRIBUTE_UNUSED; |
| 2810 | symbolS *to_symbol ATTRIBUTE_UNUSED; |
| 2811 | { |
| 2812 | as_fatal ("md_create_long_jump\n"); |
| 2813 | } |
| 2814 | |
| 2815 | /* Should never be called for tic4x. */ |
| 2816 | int |
| 2817 | md_estimate_size_before_relax (fragP, segtype) |
| 2818 | register fragS *fragP ATTRIBUTE_UNUSED; |
| 2819 | segT segtype ATTRIBUTE_UNUSED; |
| 2820 | { |
| 2821 | as_fatal ("md_estimate_size_before_relax\n"); |
| 2822 | return 0; |
| 2823 | } |
| 2824 | |
| 2825 | |
| 2826 | int |
| 2827 | md_parse_option (c, arg) |
| 2828 | int c; |
| 2829 | char *arg; |
| 2830 | { |
| 2831 | switch (c) |
| 2832 | { |
| 2833 | case OPTION_CPU: /* cpu brand */ |
| 2834 | if (TOLOWER (*arg) == 'c') |
| 2835 | arg++; |
| 2836 | tic4x_cpu = atoi (arg); |
| 2837 | if (!IS_CPU_TIC3X (tic4x_cpu) && !IS_CPU_TIC4X (tic4x_cpu)) |
| 2838 | as_warn ("Unsupported processor generation %d", tic4x_cpu); |
| 2839 | break; |
| 2840 | |
| 2841 | case OPTION_REV: /* cpu revision */ |
| 2842 | tic4x_revision = atoi (arg); |
| 2843 | break; |
| 2844 | |
| 2845 | case 'b': |
| 2846 | as_warn ("Option -b is depreciated, please use -mbig"); |
| 2847 | case OPTION_BIG: /* big model */ |
| 2848 | tic4x_big_model = 1; |
| 2849 | break; |
| 2850 | |
| 2851 | case 'p': |
| 2852 | as_warn ("Option -p is depreciated, please use -mmemparm"); |
| 2853 | case OPTION_MEMPARM: /* push args */ |
| 2854 | tic4x_reg_args = 0; |
| 2855 | break; |
| 2856 | |
| 2857 | case 'r': |
| 2858 | as_warn ("Option -r is depreciated, please use -mregparm"); |
| 2859 | case OPTION_REGPARM: /* register args */ |
| 2860 | tic4x_reg_args = 1; |
| 2861 | break; |
| 2862 | |
| 2863 | case 's': |
| 2864 | as_warn ("Option -s is depreciated, please use -msmall"); |
| 2865 | case OPTION_SMALL: /* small model */ |
| 2866 | tic4x_big_model = 0; |
| 2867 | break; |
| 2868 | |
| 2869 | case OPTION_IDLE2: |
| 2870 | tic4x_idle2 = 1; |
| 2871 | break; |
| 2872 | |
| 2873 | case OPTION_LOWPOWER: |
| 2874 | tic4x_lowpower = 1; |
| 2875 | break; |
| 2876 | |
| 2877 | case OPTION_ENHANCED: |
| 2878 | tic4x_enhanced = 1; |
| 2879 | break; |
| 2880 | |
| 2881 | default: |
| 2882 | return 0; |
| 2883 | } |
| 2884 | |
| 2885 | return 1; |
| 2886 | } |
| 2887 | |
| 2888 | void |
| 2889 | md_show_usage (stream) |
| 2890 | FILE *stream; |
| 2891 | { |
| 2892 | fprintf (stream, |
| 2893 | _("\nTIC4X options:\n" |
| 2894 | " -mcpu=CPU -mCPU select architecture variant. CPU can be:\n" |
| 2895 | " 30 - TMS320C30\n" |
| 2896 | " 31 - TMS320C31, TMS320LC31\n" |
| 2897 | " 32 - TMS320C32\n" |
| 2898 | " 33 - TMS320VC33\n" |
| 2899 | " 40 - TMS320C40\n" |
| 2900 | " 44 - TMS320C44\n" |
| 2901 | " -mrev=REV set cpu hardware revision (integer numbers).\n" |
| 2902 | " Combinations of -mcpu and -mrev will enable/disable\n" |
| 2903 | " the appropriate options (-midle2, -mlowpower and\n" |
| 2904 | " -menhanced) according to the selected type\n" |
| 2905 | " -mbig select big memory model\n" |
| 2906 | " -msmall select small memory model (default)\n" |
| 2907 | " -mregparm select register parameters (default)\n" |
| 2908 | " -mmemparm select memory parameters\n" |
| 2909 | " -midle2 enable IDLE2 support\n" |
| 2910 | " -mlowpower enable LOPOWER and MAXSPEED support\n" |
| 2911 | " -menhanced enable enhanced opcode support\n")); |
| 2912 | } |
| 2913 | |
| 2914 | /* This is called when a line is unrecognized. This is used to handle |
| 2915 | definitions of TI C3x tools style local labels $n where n is a single |
| 2916 | decimal digit. */ |
| 2917 | int |
| 2918 | tic4x_unrecognized_line (c) |
| 2919 | int c; |
| 2920 | { |
| 2921 | int lab; |
| 2922 | char *s; |
| 2923 | |
| 2924 | if (c != '$' || ! ISDIGIT (input_line_pointer[0])) |
| 2925 | return 0; |
| 2926 | |
| 2927 | s = input_line_pointer; |
| 2928 | |
| 2929 | /* Let's allow multiple digit local labels. */ |
| 2930 | lab = 0; |
| 2931 | while (ISDIGIT (*s)) |
| 2932 | { |
| 2933 | lab = lab * 10 + *s - '0'; |
| 2934 | s++; |
| 2935 | } |
| 2936 | |
| 2937 | if (dollar_label_defined (lab)) |
| 2938 | { |
| 2939 | as_bad ("Label \"$%d\" redefined", lab); |
| 2940 | return 0; |
| 2941 | } |
| 2942 | |
| 2943 | define_dollar_label (lab); |
| 2944 | colon (dollar_label_name (lab, 0)); |
| 2945 | input_line_pointer = s + 1; |
| 2946 | |
| 2947 | return 1; |
| 2948 | } |
| 2949 | |
| 2950 | /* Handle local labels peculiar to us referred to in an expression. */ |
| 2951 | symbolS * |
| 2952 | md_undefined_symbol (name) |
| 2953 | char *name; |
| 2954 | { |
| 2955 | /* Look for local labels of the form $n. */ |
| 2956 | if (name[0] == '$' && ISDIGIT (name[1])) |
| 2957 | { |
| 2958 | symbolS *symbolP; |
| 2959 | char *s = name + 1; |
| 2960 | int lab = 0; |
| 2961 | |
| 2962 | while (ISDIGIT ((unsigned char) *s)) |
| 2963 | { |
| 2964 | lab = lab * 10 + *s - '0'; |
| 2965 | s++; |
| 2966 | } |
| 2967 | if (dollar_label_defined (lab)) |
| 2968 | { |
| 2969 | name = dollar_label_name (lab, 0); |
| 2970 | symbolP = symbol_find (name); |
| 2971 | } |
| 2972 | else |
| 2973 | { |
| 2974 | name = dollar_label_name (lab, 1); |
| 2975 | symbolP = symbol_find_or_make (name); |
| 2976 | } |
| 2977 | |
| 2978 | return symbolP; |
| 2979 | } |
| 2980 | return NULL; |
| 2981 | } |
| 2982 | |
| 2983 | /* Parse an operand that is machine-specific. */ |
| 2984 | void |
| 2985 | md_operand (expressionP) |
| 2986 | expressionS *expressionP ATTRIBUTE_UNUSED; |
| 2987 | { |
| 2988 | } |
| 2989 | |
| 2990 | /* Round up a section size to the appropriate boundary---do we need this? */ |
| 2991 | valueT |
| 2992 | md_section_align (segment, size) |
| 2993 | segT segment ATTRIBUTE_UNUSED; |
| 2994 | valueT size; |
| 2995 | { |
| 2996 | return size; /* Byte (i.e., 32-bit) alignment is fine? */ |
| 2997 | } |
| 2998 | |
| 2999 | static int |
| 3000 | tic4x_pc_offset (op) |
| 3001 | unsigned int op; |
| 3002 | { |
| 3003 | /* Determine the PC offset for a C[34]x instruction. |
| 3004 | This could be simplified using some boolean algebra |
| 3005 | but at the expense of readability. */ |
| 3006 | switch (op >> 24) |
| 3007 | { |
| 3008 | case 0x60: /* br */ |
| 3009 | case 0x62: /* call (C4x) */ |
| 3010 | case 0x64: /* rptb (C4x) */ |
| 3011 | return 1; |
| 3012 | case 0x61: /* brd */ |
| 3013 | case 0x63: /* laj */ |
| 3014 | case 0x65: /* rptbd (C4x) */ |
| 3015 | return 3; |
| 3016 | case 0x66: /* swi */ |
| 3017 | case 0x67: |
| 3018 | return 0; |
| 3019 | default: |
| 3020 | break; |
| 3021 | } |
| 3022 | |
| 3023 | switch ((op & 0xffe00000) >> 20) |
| 3024 | { |
| 3025 | case 0x6a0: /* bB */ |
| 3026 | case 0x720: /* callB */ |
| 3027 | case 0x740: /* trapB */ |
| 3028 | return 1; |
| 3029 | |
| 3030 | case 0x6a2: /* bBd */ |
| 3031 | case 0x6a6: /* bBat */ |
| 3032 | case 0x6aa: /* bBaf */ |
| 3033 | case 0x722: /* lajB */ |
| 3034 | case 0x748: /* latB */ |
| 3035 | case 0x798: /* rptbd */ |
| 3036 | return 3; |
| 3037 | |
| 3038 | default: |
| 3039 | break; |
| 3040 | } |
| 3041 | |
| 3042 | switch ((op & 0xfe200000) >> 20) |
| 3043 | { |
| 3044 | case 0x6e0: /* dbB */ |
| 3045 | return 1; |
| 3046 | |
| 3047 | case 0x6e2: /* dbBd */ |
| 3048 | return 3; |
| 3049 | |
| 3050 | default: |
| 3051 | break; |
| 3052 | } |
| 3053 | |
| 3054 | return 0; |
| 3055 | } |
| 3056 | |
| 3057 | /* Exactly what point is a PC-relative offset relative TO? |
| 3058 | With the C3x we have the following: |
| 3059 | DBcond, Bcond disp + PC + 1 => PC |
| 3060 | DBcondD, BcondD disp + PC + 3 => PC |
| 3061 | */ |
| 3062 | long |
| 3063 | md_pcrel_from (fixP) |
| 3064 | fixS *fixP; |
| 3065 | { |
| 3066 | unsigned char *buf; |
| 3067 | unsigned int op; |
| 3068 | |
| 3069 | buf = (unsigned char *) fixP->fx_frag->fr_literal + fixP->fx_where; |
| 3070 | op = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; |
| 3071 | |
| 3072 | return ((fixP->fx_where + fixP->fx_frag->fr_address) >> 2) + |
| 3073 | tic4x_pc_offset (op); |
| 3074 | } |
| 3075 | |
| 3076 | /* Fill the alignment area with NOP's on .text, unless fill-data |
| 3077 | was specified. */ |
| 3078 | int |
| 3079 | tic4x_do_align (alignment, fill, len, max) |
| 3080 | int alignment ATTRIBUTE_UNUSED; |
| 3081 | const char *fill ATTRIBUTE_UNUSED; |
| 3082 | int len ATTRIBUTE_UNUSED; |
| 3083 | int max ATTRIBUTE_UNUSED; |
| 3084 | { |
| 3085 | unsigned long nop = TIC_NOP_OPCODE; |
| 3086 | |
| 3087 | /* Because we are talking lwords, not bytes, adjust alignment to do words */ |
| 3088 | alignment += 2; |
| 3089 | |
| 3090 | if (alignment != 0 && !need_pass_2) |
| 3091 | { |
| 3092 | if (fill == NULL) |
| 3093 | { |
| 3094 | /*if (subseg_text_p (now_seg))*/ /* FIXME: doesn't work for .text for some reason */ |
| 3095 | frag_align_pattern( alignment, (const char *)&nop, sizeof(nop), max); |
| 3096 | return 1; |
| 3097 | /*else |
| 3098 | frag_align (alignment, 0, max);*/ |
| 3099 | } |
| 3100 | else if (len <= 1) |
| 3101 | frag_align (alignment, *fill, max); |
| 3102 | else |
| 3103 | frag_align_pattern (alignment, fill, len, max); |
| 3104 | } |
| 3105 | |
| 3106 | /* Return 1 to skip the default alignment function */ |
| 3107 | return 1; |
| 3108 | } |
| 3109 | |
| 3110 | /* Look for and remove parallel instruction operator ||. */ |
| 3111 | void |
| 3112 | tic4x_start_line () |
| 3113 | { |
| 3114 | char *s = input_line_pointer; |
| 3115 | |
| 3116 | SKIP_WHITESPACE (); |
| 3117 | |
| 3118 | /* If parallel instruction prefix found at start of line, skip it. */ |
| 3119 | if (*input_line_pointer == '|' && input_line_pointer[1] == '|') |
| 3120 | { |
| 3121 | if (insn->in_use) |
| 3122 | { |
| 3123 | insn->parallel = 1; |
| 3124 | input_line_pointer ++; |
| 3125 | *input_line_pointer = ' '; |
| 3126 | /* So line counters get bumped. */ |
| 3127 | input_line_pointer[-1] = '\n'; |
| 3128 | } |
| 3129 | } |
| 3130 | else |
| 3131 | { |
| 3132 | /* Write out the previous insn here */ |
| 3133 | if (insn->in_use) |
| 3134 | md_assemble (NULL); |
| 3135 | input_line_pointer = s; |
| 3136 | } |
| 3137 | } |
| 3138 | |
| 3139 | arelent * |
| 3140 | tc_gen_reloc (seg, fixP) |
| 3141 | asection *seg ATTRIBUTE_UNUSED; |
| 3142 | fixS *fixP; |
| 3143 | { |
| 3144 | arelent *reloc; |
| 3145 | |
| 3146 | reloc = (arelent *) xmalloc (sizeof (arelent)); |
| 3147 | |
| 3148 | reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); |
| 3149 | *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixP->fx_addsy); |
| 3150 | reloc->address = fixP->fx_frag->fr_address + fixP->fx_where; |
| 3151 | reloc->address /= OCTETS_PER_BYTE; |
| 3152 | reloc->howto = bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type); |
| 3153 | if (reloc->howto == (reloc_howto_type *) NULL) |
| 3154 | { |
| 3155 | as_bad_where (fixP->fx_file, fixP->fx_line, |
| 3156 | "Reloc %d not supported by object file format", |
| 3157 | (int) fixP->fx_r_type); |
| 3158 | return NULL; |
| 3159 | } |
| 3160 | |
| 3161 | if (fixP->fx_r_type == BFD_RELOC_HI16) |
| 3162 | reloc->addend = fixP->fx_offset; |
| 3163 | else |
| 3164 | reloc->addend = fixP->fx_addnumber; |
| 3165 | |
| 3166 | return reloc; |
| 3167 | } |