| 1 | dnl Process this file with autoconf to produce a configure script. |
| 2 | dnl |
| 3 | dnl And be careful when changing it! If you must add tests with square |
| 4 | dnl brackets, be sure changequote invocations surround it. |
| 5 | dnl |
| 6 | dnl Copyright (C) 2012-2018 Free Software Foundation, Inc. |
| 7 | dnl |
| 8 | dnl This file is free software; you can redistribute it and/or modify |
| 9 | dnl it under the terms of the GNU General Public License as published by |
| 10 | dnl the Free Software Foundation; either version 3 of the License, or |
| 11 | dnl (at your option) any later version. |
| 12 | dnl |
| 13 | dnl This program is distributed in the hope that it will be useful, |
| 14 | dnl but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | dnl GNU General Public License for more details. |
| 17 | dnl |
| 18 | dnl You should have received a copy of the GNU General Public License |
| 19 | dnl along with this program; see the file COPYING3. If not see |
| 20 | dnl <http://www.gnu.org/licenses/>. |
| 21 | dnl |
| 22 | dnl v2.5 needed for --bindir et al |
| 23 | AC_PREREQ(2.59) |
| 24 | m4_include([../bfd/version.m4]) |
| 25 | AC_INIT([gas], BFD_VERSION) |
| 26 | AC_CONFIG_SRCDIR(as.h) |
| 27 | |
| 28 | dnl Autoconf 2.57 will find the aux dir without this. However, unless |
| 29 | dnl we specify this explicitly, automake-1.7 will assume that ylwrap is in |
| 30 | dnl gas/ instead of gas/../. |
| 31 | AC_CONFIG_AUX_DIR(..) |
| 32 | AC_CANONICAL_TARGET |
| 33 | AC_ISC_POSIX |
| 34 | |
| 35 | AM_INIT_AUTOMAKE |
| 36 | |
| 37 | AC_PROG_CC |
| 38 | AC_GNU_SOURCE |
| 39 | AC_USE_SYSTEM_EXTENSIONS |
| 40 | |
| 41 | LT_INIT |
| 42 | ACX_LARGEFILE |
| 43 | ACX_PROG_CMP_IGNORE_INITIAL |
| 44 | |
| 45 | AC_ARG_ENABLE(targets, |
| 46 | [ --enable-targets alternative target configurations besides the primary], |
| 47 | [case "${enableval}" in |
| 48 | yes | "") AC_MSG_ERROR(enable-targets option must specify target names or 'all') |
| 49 | ;; |
| 50 | no) enable_targets= ;; |
| 51 | *) enable_targets=$enableval ;; |
| 52 | esac])dnl |
| 53 | |
| 54 | ac_checking=yes |
| 55 | if grep '^RELEASE=y' ${srcdir}/../bfd/Makefile.am >/dev/null 2>/dev/null ; then |
| 56 | ac_checking= |
| 57 | fi |
| 58 | AC_ARG_ENABLE(checking, |
| 59 | [ --enable-checking enable run-time checks], |
| 60 | [case "${enableval}" in |
| 61 | no|none) ac_checking= ;; |
| 62 | *) ac_checking=yes ;; |
| 63 | esac])dnl |
| 64 | if test x$ac_checking != x ; then |
| 65 | AC_DEFINE(ENABLE_CHECKING, 1, [Define if you want run-time sanity checks.]) |
| 66 | fi |
| 67 | |
| 68 | # PR gas/19109 |
| 69 | # Decide the default method for compressing debug sections. |
| 70 | ac_default_compressed_debug_sections=unset |
| 71 | # Provide a configure time option to override our default. |
| 72 | AC_ARG_ENABLE(compressed_debug_sections, |
| 73 | AS_HELP_STRING([--enable-compressed-debug-sections={all,gas,none}], |
| 74 | [compress debug sections by default]), |
| 75 | [case ,"${enableval}", in |
| 76 | ,yes, | ,all, | *,gas,*) ac_default_compressed_debug_sections=yes ;; |
| 77 | ,no, | ,none,) ac_default_compressed_debug_sections=no ;; |
| 78 | *) ac_default_compressed_debug_sections=unset ;; |
| 79 | esac])dnl |
| 80 | |
| 81 | # PR gas/19520 |
| 82 | # Decide if x86 assembler should generate relax relocations. |
| 83 | ac_default_x86_relax_relocations=unset |
| 84 | # Provide a configure time option to override our default. |
| 85 | AC_ARG_ENABLE(x86_relax_relocations, |
| 86 | AS_HELP_STRING([--enable-x86-relax-relocations], |
| 87 | [generate x86 relax relocations by default]), |
| 88 | [case "${enableval}" in |
| 89 | no) ac_default_x86_relax_relocations=0 ;; |
| 90 | esac])dnl |
| 91 | |
| 92 | # Decide if ELF assembler should generate common symbols with the |
| 93 | # STT_COMMON type. |
| 94 | ac_default_elf_stt_common=unset |
| 95 | # Provide a configure time option to override our default. |
| 96 | AC_ARG_ENABLE(elf_stt_common, |
| 97 | AS_HELP_STRING([--enable-elf-stt-common], |
| 98 | [generate ELF common symbols with STT_COMMON type by default]), |
| 99 | [case "${enableval}" in |
| 100 | yes) ac_default_elf_stt_common=1 ;; |
| 101 | esac])dnl |
| 102 | |
| 103 | |
| 104 | # Decide if the ELF assembler should default to generating |
| 105 | # GNU Build notes if none are provided by the input. |
| 106 | ac_default_generate_build_notes=0 |
| 107 | # Provide a configuration option to override the default. |
| 108 | AC_ARG_ENABLE(generate_build_notes, |
| 109 | AS_HELP_STRING([--enable-generate-build-notes], |
| 110 | [generate GNU Build notes if none are provided by the input]), |
| 111 | [case "${enableval}" in |
| 112 | yes) ac_default_generate_build_notes=1 ;; |
| 113 | no) ac_default_generate_build_notes=0 ;; |
| 114 | esac])dnl |
| 115 | |
| 116 | |
| 117 | using_cgen=no |
| 118 | |
| 119 | AM_BINUTILS_WARNINGS |
| 120 | |
| 121 | # Generate a header file |
| 122 | AC_CONFIG_HEADERS(config.h:config.in) |
| 123 | |
| 124 | dnl Option --with-cpu=TYPE allows configure type control of the default |
| 125 | dnl cpu type within the assembler. Currently only the ARC target |
| 126 | dnl supports this feature, but others may be added in the future. |
| 127 | AC_ARG_WITH(cpu, |
| 128 | AS_HELP_STRING([--with-cpu=CPU], |
| 129 | [default cpu variant is CPU (currently only supported on ARC)]), |
| 130 | [AC_DEFINE_UNQUOTED(TARGET_WITH_CPU, |
| 131 | "${with_cpu}", |
| 132 | [Target specific CPU.])], |
| 133 | []) |
| 134 | |
| 135 | # PR 14072 |
| 136 | AH_VERBATIM([00_CONFIG_H_CHECK], |
| 137 | [/* Check that config.h is #included before system headers |
| 138 | (this works only for glibc, but that should be enough). */ |
| 139 | #if defined(__GLIBC__) && !defined(__FreeBSD_kernel__) && !defined(__CONFIG_H__) |
| 140 | # error config.h must be #included before system headers |
| 141 | #endif |
| 142 | #define __CONFIG_H__ 1]) |
| 143 | |
| 144 | # If we are on a DOS filesystem, we must use gdb.ini rather than |
| 145 | # .gdbinit. |
| 146 | case "${host}" in |
| 147 | *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-windows*) |
| 148 | GDBINIT="gdb.ini" |
| 149 | AC_CONFIG_FILES(gdb.ini:gdbinit.in) |
| 150 | ;; |
| 151 | *) |
| 152 | GDBINIT=".gdbinit" |
| 153 | AC_CONFIG_FILES(.gdbinit:gdbinit.in) |
| 154 | ;; |
| 155 | esac |
| 156 | AC_SUBST(GDBINIT) |
| 157 | |
| 158 | #We need this for the host. |
| 159 | AC_C_BIGENDIAN |
| 160 | |
| 161 | te_file=generic |
| 162 | |
| 163 | # Makefile target for installing gas in $(tooldir)/bin. |
| 164 | install_tooldir=install-exec-tooldir |
| 165 | |
| 166 | canon_targets="" |
| 167 | all_targets=no |
| 168 | if test -n "$enable_targets" ; then |
| 169 | for t in `echo $enable_targets | sed 's/,/ /g'`; do |
| 170 | if test $t = "all"; then |
| 171 | all_targets=yes |
| 172 | continue |
| 173 | fi |
| 174 | result=`$ac_config_sub $t 2>/dev/null` |
| 175 | if test -n "$result" ; then |
| 176 | canon_targets="$canon_targets $result" |
| 177 | # else |
| 178 | # # Permit "all", etc. We don't support it yet though. |
| 179 | # canon_targets="$canon_targets $t" |
| 180 | fi |
| 181 | done |
| 182 | GAS_UNIQ(canon_targets) |
| 183 | fi |
| 184 | |
| 185 | emulations="" |
| 186 | |
| 187 | for this_target in $target $canon_targets ; do |
| 188 | |
| 189 | targ=${this_target} |
| 190 | . ${srcdir}/configure.tgt |
| 191 | |
| 192 | case ${target_cpu} in |
| 193 | crisv32) |
| 194 | AC_DEFINE_UNQUOTED(DEFAULT_CRIS_ARCH, $arch, |
| 195 | [Default CRIS architecture.]) |
| 196 | ;; |
| 197 | esac |
| 198 | |
| 199 | if test ${this_target} = $target ; then |
| 200 | target_cpu_type=${cpu_type} |
| 201 | elif test ${target_cpu_type} != ${cpu_type} ; then |
| 202 | continue |
| 203 | fi |
| 204 | |
| 205 | generic_target=${cpu_type}-${target_vendor}-${target_os} |
| 206 | case ${generic_target} in |
| 207 | i386-*-msdosdjgpp* \ |
| 208 | | i386-*-go32* \ |
| 209 | | i386-go32-rtems*) |
| 210 | AC_DEFINE(STRICTCOFF, 1, [Using strict COFF?]) |
| 211 | ;; |
| 212 | |
| 213 | i386-*-solaris2 \ |
| 214 | | x86_64-*-solaris2 \ |
| 215 | | i386-*-solaris2.[[0-9]] \ |
| 216 | | i386-*-solaris2.1[[01]] \ |
| 217 | | x86_64-*-solaris2.1[[01]]) |
| 218 | if test ${this_target} = $target \ |
| 219 | && test ${ac_default_x86_relax_relocations} = unset; then |
| 220 | ac_default_x86_relax_relocations=0 |
| 221 | fi |
| 222 | ;; |
| 223 | |
| 224 | microblaze*) |
| 225 | ;; |
| 226 | |
| 227 | changequote(,)dnl |
| 228 | ppc-*-aix[5-9].*) |
| 229 | changequote([,])dnl |
| 230 | AC_DEFINE(AIX_WEAK_SUPPORT, 1, |
| 231 | [Define if using AIX 5.2 value for C_WEAKEXT.]) |
| 232 | ;; |
| 233 | ppc-*-solaris*) |
| 234 | if test ${this_target} = $target; then |
| 235 | AC_DEFINE(TARGET_SOLARIS_COMMENT, 1, |
| 236 | [Define if default target is PowerPC Solaris.]) |
| 237 | fi |
| 238 | if test x${endian} = xbig; then |
| 239 | AC_MSG_ERROR(Solaris must be configured little endian) |
| 240 | fi |
| 241 | ;; |
| 242 | esac |
| 243 | |
| 244 | if test ${this_target} = $target ; then |
| 245 | endian_def= |
| 246 | if test x${endian} = xbig; then |
| 247 | endian_def=1 |
| 248 | elif test x${endian} = xlittle; then |
| 249 | endian_def=0 |
| 250 | fi |
| 251 | if test x${endian_def} != x; then |
| 252 | AC_DEFINE_UNQUOTED(TARGET_BYTES_BIG_ENDIAN, $endian_def, |
| 253 | [Define as 1 if big endian.]) |
| 254 | fi |
| 255 | fi |
| 256 | |
| 257 | # Other random stuff. |
| 258 | |
| 259 | case ${cpu_type} in |
| 260 | mips) |
| 261 | # Set mips_cpu to the name of the default CPU. |
| 262 | case ${target_cpu} in |
| 263 | mips | mipsbe | mipseb | mipsle | mipsel | mips64 | mips64el) |
| 264 | mips_cpu=from-abi |
| 265 | ;; |
| 266 | mipsisa32 | mipsisa32el) |
| 267 | mips_cpu=mips32 |
| 268 | ;; |
| 269 | mipsisa32r2 | mipsisa32r2el) |
| 270 | mips_cpu=mips32r2 |
| 271 | ;; |
| 272 | mipsisa32r3 | mipsisa32r3el) |
| 273 | mips_cpu=mips32r3 |
| 274 | ;; |
| 275 | mipsisa32r5 | mipsisa32r5el) |
| 276 | mips_cpu=mips32r5 |
| 277 | ;; |
| 278 | mipsisa32r6 | mipsisa32r6el) |
| 279 | mips_cpu=mips32r6 |
| 280 | ;; |
| 281 | mipsisa64 | mipsisa64el) |
| 282 | mips_cpu=mips64 |
| 283 | ;; |
| 284 | mipsisa64r2 | mipsisa64r2el) |
| 285 | mips_cpu=mips64r2 |
| 286 | ;; |
| 287 | mipsisa64r3 | mipsisa64r3el) |
| 288 | mips_cpu=mips64r3 |
| 289 | ;; |
| 290 | mipsisa64r5 | mipsisa64r5el) |
| 291 | mips_cpu=mips64r5 |
| 292 | ;; |
| 293 | mipsisa64r6 | mipsisa64r6el) |
| 294 | mips_cpu=mips64r6 |
| 295 | ;; |
| 296 | mipstx39 | mipstx39el) |
| 297 | mips_cpu=r3900 |
| 298 | ;; |
| 299 | mips64vr | mips64vrel) |
| 300 | mips_cpu=vr4100 |
| 301 | ;; |
| 302 | mipsisa32r2* | mipsisa64r2*) |
| 303 | changequote(,)dnl |
| 304 | mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r2//' -e 's/el$//'` |
| 305 | changequote([,])dnl |
| 306 | ;; |
| 307 | mipsisa32r6* | mipsisa64r6*) |
| 308 | changequote(,)dnl |
| 309 | mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r6//' -e 's/el$//'` |
| 310 | changequote([,])dnl |
| 311 | ;; |
| 312 | mips64* | mipsisa64* | mipsisa32*) |
| 313 | changequote(,)dnl |
| 314 | mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..//' -e 's/el$//'` |
| 315 | changequote([,])dnl |
| 316 | ;; |
| 317 | mips*) |
| 318 | changequote(,)dnl |
| 319 | mips_cpu=`echo $target_cpu | sed -e 's/^mips//' -e 's/el$//'` |
| 320 | changequote([,])dnl |
| 321 | ;; |
| 322 | *) |
| 323 | AC_MSG_ERROR($target_cpu isn't a supported MIPS CPU name) |
| 324 | ;; |
| 325 | esac |
| 326 | # See whether it's appropriate to set E_MIPS_ABI_O32 for o32 |
| 327 | # binaries. It's a GNU extension that some OSes don't understand. |
| 328 | case ${target} in |
| 329 | *-*-irix*) |
| 330 | use_e_mips_abi_o32=0 |
| 331 | ;; |
| 332 | *) |
| 333 | use_e_mips_abi_o32=1 |
| 334 | ;; |
| 335 | esac |
| 336 | # Decide whether to generate 32-bit or 64-bit code by default. |
| 337 | # Used to resolve -march=from-abi when an embedded ABI is selected. |
| 338 | case ${target} in |
| 339 | mips64*-*-* | mipsisa64*-*-*) |
| 340 | mips_default_64bit=1 |
| 341 | ;; |
| 342 | *) |
| 343 | mips_default_64bit=0 |
| 344 | ;; |
| 345 | esac |
| 346 | # Decide which ABI to target by default. |
| 347 | case ${target} in |
| 348 | mips64*-linux* | mips-sgi-irix6* | mips64*-freebsd* \ |
| 349 | | mips64*-kfreebsd*-gnu | mips64*-ps2-elf*) |
| 350 | mips_default_abi=N32_ABI |
| 351 | ;; |
| 352 | mips*-linux* | mips*-freebsd* | mips*-kfreebsd*-gnu) |
| 353 | mips_default_abi=O32_ABI |
| 354 | ;; |
| 355 | mips64*-openbsd*) |
| 356 | mips_default_abi=N64_ABI |
| 357 | ;; |
| 358 | *) |
| 359 | mips_default_abi=NO_ABI |
| 360 | ;; |
| 361 | esac |
| 362 | AC_DEFINE_UNQUOTED(MIPS_CPU_STRING_DEFAULT, "$mips_cpu", |
| 363 | [Default CPU for MIPS targets. ]) |
| 364 | AC_DEFINE_UNQUOTED(USE_E_MIPS_ABI_O32, $use_e_mips_abi_o32, |
| 365 | [Allow use of E_MIPS_ABI_O32 on MIPS targets. ]) |
| 366 | AC_DEFINE_UNQUOTED(MIPS_DEFAULT_64BIT, $mips_default_64bit, |
| 367 | [Generate 64-bit code by default on MIPS targets. ]) |
| 368 | AC_DEFINE_UNQUOTED(MIPS_DEFAULT_ABI, $mips_default_abi, |
| 369 | [Choose a default ABI for MIPS targets. ]) |
| 370 | ;; |
| 371 | esac |
| 372 | |
| 373 | # Do we need the opcodes library? |
| 374 | case ${cpu_type} in |
| 375 | vax | tic30) |
| 376 | ;; |
| 377 | |
| 378 | *) |
| 379 | need_opcodes=yes |
| 380 | |
| 381 | case "${enable_shared}" in |
| 382 | yes) shared_opcodes=true ;; |
| 383 | *opcodes*) shared_opcodes=true ;; |
| 384 | *) shared_opcodes=false ;; |
| 385 | esac |
| 386 | ;; |
| 387 | esac |
| 388 | |
| 389 | # Any other special object files needed ? |
| 390 | case ${cpu_type} in |
| 391 | |
| 392 | bfin) |
| 393 | echo ${extra_objects} | grep -s "bfin-parse.o" |
| 394 | if test $? -ne 0 ; then |
| 395 | extra_objects="$extra_objects bfin-parse.o" |
| 396 | fi |
| 397 | |
| 398 | echo ${extra_objects} | grep -s "bfin-lex-wrapper.o" |
| 399 | if test $? -ne 0 ; then |
| 400 | extra_objects="$extra_objects bfin-lex-wrapper.o" |
| 401 | fi |
| 402 | ;; |
| 403 | |
| 404 | epiphany | fr30 | ip2k | iq2000 | lm32 | m32r | or1k) |
| 405 | using_cgen=yes |
| 406 | ;; |
| 407 | |
| 408 | m32c) |
| 409 | using_cgen=yes |
| 410 | ;; |
| 411 | frv) |
| 412 | using_cgen=yes |
| 413 | ;; |
| 414 | m68k) |
| 415 | case ${extra_objects} in |
| 416 | *m68k-parse.o*) ;; |
| 417 | *) extra_objects="$extra_objects m68k-parse.o" ;; |
| 418 | esac |
| 419 | ;; |
| 420 | |
| 421 | mep) |
| 422 | using_cgen=yes |
| 423 | ;; |
| 424 | |
| 425 | mips) |
| 426 | echo ${extra_objects} | grep -s "itbl-parse.o" |
| 427 | if test $? -ne 0 ; then |
| 428 | extra_objects="$extra_objects itbl-parse.o" |
| 429 | fi |
| 430 | |
| 431 | echo ${extra_objects} | grep -s "itbl-lex-wrapper.o" |
| 432 | if test $? -ne 0 ; then |
| 433 | extra_objects="$extra_objects itbl-lex-wrapper.o" |
| 434 | fi |
| 435 | |
| 436 | echo ${extra_objects} | grep -s "itbl-ops.o" |
| 437 | if test $? -ne 0 ; then |
| 438 | extra_objects="$extra_objects itbl-ops.o" |
| 439 | fi |
| 440 | ;; |
| 441 | |
| 442 | mt) |
| 443 | using_cgen=yes |
| 444 | ;; |
| 445 | |
| 446 | nds32) |
| 447 | # Decide BASELINE, REDUCED_REGS, FPU_DP_EXT, FPU_SP_EXT features |
| 448 | # based on arch_name. |
| 449 | AC_MSG_CHECKING(for default configuration of --with-arch) |
| 450 | if test "x${with_arch}" != x; then |
| 451 | case ${with_arch} in |
| 452 | v2j | v2s | v2f | v2 | v3m | v3j | v3s | v3f | v3 ) |
| 453 | AC_DEFINE_UNQUOTED(NDS32_DEFAULT_ARCH_NAME, "$with_arch", |
| 454 | [Define value for nds32_arch_name]) |
| 455 | ;; |
| 456 | *) |
| 457 | AC_MSG_ERROR(This kind of arch name does *NOT* exist!) |
| 458 | ;; |
| 459 | esac |
| 460 | fi |
| 461 | AC_MSG_RESULT($with_arch) |
| 462 | |
| 463 | # Decide features one by one. |
| 464 | AC_MSG_CHECKING(for default configuration of --enable-dx-regs) |
| 465 | if test "x${enable_dx_regs}" = xyes; then |
| 466 | AC_DEFINE(NDS32_DEFAULT_DX_REGS, 1, |
| 467 | [Define value for nds32_dx_regs]) |
| 468 | else |
| 469 | AC_DEFINE(NDS32_DEFAULT_DX_REGS, 0, |
| 470 | [Define default value for nds32_dx_regs]) |
| 471 | fi |
| 472 | AC_MSG_RESULT($enable_dx_regs) |
| 473 | |
| 474 | AC_MSG_CHECKING(for default configuration of --enable-perf-ext) |
| 475 | if test "x${enable_perf_ext}" = xno; then |
| 476 | AC_DEFINE(NDS32_DEFAULT_PERF_EXT, 0, |
| 477 | [Define value for nds32_perf_ext]) |
| 478 | else |
| 479 | AC_DEFINE(NDS32_DEFAULT_PERF_EXT, 1, |
| 480 | [Define default value for nds32_perf_ext]) |
| 481 | fi |
| 482 | AC_MSG_RESULT($enable_perf_ext) |
| 483 | |
| 484 | AC_MSG_CHECKING(for default configuration of --enable-perf-ext2) |
| 485 | if test "x${enable_perf_ext2}" = xno; then |
| 486 | AC_DEFINE(NDS32_DEFAULT_PERF_EXT2, 0, |
| 487 | [Define value for nds32_perf_ext2]) |
| 488 | else |
| 489 | AC_DEFINE(NDS32_DEFAULT_PERF_EXT2, 1, |
| 490 | [Define default value for nds32_perf_ext2]) |
| 491 | fi |
| 492 | AC_MSG_RESULT($enable_perf_ext2) |
| 493 | |
| 494 | AC_MSG_CHECKING(for default configuration of --enable-string-ext) |
| 495 | if test "x${enable_string_ext}" = xno; then |
| 496 | AC_DEFINE(NDS32_DEFAULT_STRING_EXT, 0, |
| 497 | [Define value for nds32_string_ext]) |
| 498 | else |
| 499 | AC_DEFINE(NDS32_DEFAULT_STRING_EXT, 1, |
| 500 | [Define default value for nds32_string_ext]) |
| 501 | fi |
| 502 | AC_MSG_RESULT($enable_string_ext) |
| 503 | |
| 504 | AC_MSG_CHECKING(for default configuration of --enable-audio-ext) |
| 505 | if test "x${enable_audio_ext}" = xno; then |
| 506 | AC_DEFINE(NDS32_DEFAULT_AUDIO_EXT, 0, |
| 507 | [Define value for nds32_audio_ext]) |
| 508 | else |
| 509 | AC_DEFINE(NDS32_DEFAULT_AUDIO_EXT, 1, |
| 510 | [Define default value for nds32_audio_ext]) |
| 511 | fi |
| 512 | AC_MSG_RESULT($enable_audio_ext) |
| 513 | ;; |
| 514 | |
| 515 | aarch64 | i386 | riscv | s390 | sparc) |
| 516 | if test $this_target = $target ; then |
| 517 | AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.]) |
| 518 | fi |
| 519 | ;; |
| 520 | |
| 521 | rl78) |
| 522 | echo ${extra_objects} | grep -s "rl78-parse.o" |
| 523 | if test $? -ne 0 ; then |
| 524 | extra_objects="$extra_objects rl78-parse.o" |
| 525 | fi |
| 526 | ;; |
| 527 | |
| 528 | rx) |
| 529 | echo ${extra_objects} | grep -s "rx-parse.o" |
| 530 | if test $? -ne 0 ; then |
| 531 | extra_objects="$extra_objects rx-parse.o" |
| 532 | fi |
| 533 | ;; |
| 534 | |
| 535 | xstormy16) |
| 536 | using_cgen=yes |
| 537 | ;; |
| 538 | |
| 539 | xc16x) |
| 540 | using_cgen=yes |
| 541 | ;; |
| 542 | |
| 543 | xtensa) |
| 544 | echo ${extra_objects} | grep -s "xtensa-relax.o" |
| 545 | if test $? -ne 0 ; then |
| 546 | extra_objects="$extra_objects xtensa-relax.o" |
| 547 | fi |
| 548 | ;; |
| 549 | |
| 550 | *) |
| 551 | ;; |
| 552 | esac |
| 553 | |
| 554 | if test $using_cgen = yes ; then |
| 555 | case "x${extra_objects}" in |
| 556 | *cgen.o*) ;; |
| 557 | *) extra_objects="$extra_objects cgen.o" ;; |
| 558 | esac |
| 559 | fi |
| 560 | |
| 561 | # See if we really can support this configuration with the emulation code. |
| 562 | |
| 563 | if test $this_target = $target ; then |
| 564 | obj_format=$fmt |
| 565 | te_file=$em |
| 566 | fi |
| 567 | |
| 568 | case ${te_file} in |
| 569 | vms) extra_objects="$extra_objects te-vms.o" ;; |
| 570 | esac |
| 571 | |
| 572 | # From target name and format, produce a list of supported emulations. |
| 573 | |
| 574 | case ${generic_target}-${fmt} in |
| 575 | mips-*-*-*) case "$endian" in |
| 576 | big) emulation="mipsbelf mipslelf mipself" ;; |
| 577 | *) emulation="mipslelf mipsbelf mipself" ;; |
| 578 | esac ;; |
| 579 | # i386-pc-pe-coff != i386-pc-coff. |
| 580 | i386-*-pe-coff) ;; |
| 581 | # Uncommenting the next line will turn on support for i386 AOUT |
| 582 | # for the default linux configuration |
| 583 | # i386-*-linux*-elf) emulation="i386elf i386aout" ;; |
| 584 | # |
| 585 | i386-*-aout) emulation="i386aout" ;; |
| 586 | i386-*-coff) emulation="i386coff" ;; |
| 587 | i386-*-elf) emulation="i386elf" ;; |
| 588 | |
| 589 | # Always all formats. The first stated emulation becomes the default. |
| 590 | cris-*-*aout*) emulation="crisaout criself" ;; |
| 591 | cris-*-*) emulation="criself crisaout" ;; |
| 592 | esac |
| 593 | |
| 594 | emulations="$emulations $emulation" |
| 595 | |
| 596 | done |
| 597 | |
| 598 | if test ${ac_default_x86_relax_relocations} = unset; then |
| 599 | ac_default_x86_relax_relocations=1 |
| 600 | fi |
| 601 | AC_DEFINE_UNQUOTED(DEFAULT_GENERATE_X86_RELAX_RELOCATIONS, |
| 602 | $ac_default_x86_relax_relocations, |
| 603 | [Define to 1 if you want to generate x86 relax relocations by default.]) |
| 604 | |
| 605 | if test ${ac_default_elf_stt_common} = unset; then |
| 606 | ac_default_elf_stt_common=0 |
| 607 | fi |
| 608 | AC_DEFINE_UNQUOTED(DEFAULT_GENERATE_ELF_STT_COMMON, |
| 609 | $ac_default_elf_stt_common, |
| 610 | [Define to 1 if you want to generate ELF common symbols with the |
| 611 | STT_COMMON type by default.]) |
| 612 | |
| 613 | AC_DEFINE_UNQUOTED(DEFAULT_GENERATE_BUILD_NOTES, |
| 614 | $ac_default_generate_build_notes, |
| 615 | [Define to 1 if you want to generate GNU Build attribute notes |
| 616 | by default, if none are contained in the input.]) |
| 617 | |
| 618 | if test x$ac_default_compressed_debug_sections = xyes ; then |
| 619 | AC_DEFINE(DEFAULT_FLAG_COMPRESS_DEBUG, 1, [Define if you want compressed debug sections by default.]) |
| 620 | fi |
| 621 | |
| 622 | # Turn on all targets if possible |
| 623 | if test ${all_targets} = "yes"; then |
| 624 | case ${target_cpu_type} in |
| 625 | i386) |
| 626 | case ${obj_format} in |
| 627 | aout) |
| 628 | emulations="$emulations i386coff i386elf" |
| 629 | ;; |
| 630 | coff) |
| 631 | emulations="$emulations i386aout i386elf" |
| 632 | ;; |
| 633 | elf) |
| 634 | emulations="$emulations i386aout i386coff" |
| 635 | ;; |
| 636 | esac |
| 637 | ;; |
| 638 | x86_64) |
| 639 | case ${obj_format} in |
| 640 | aout) |
| 641 | emulations="$emulations i386coff i386elf" |
| 642 | ;; |
| 643 | coff) |
| 644 | emulations="$emulations i386aout i386elf" |
| 645 | ;; |
| 646 | elf) |
| 647 | emulations="$emulations i386aout i386coff" |
| 648 | ;; |
| 649 | esac |
| 650 | ;; |
| 651 | esac |
| 652 | fi |
| 653 | |
| 654 | # PE code has way too many macros tweaking behaviour |
| 655 | case ${te_file} in |
| 656 | pe*) emulations="" ;; |
| 657 | esac |
| 658 | |
| 659 | # Assign floating point type. Most processors with FP support |
| 660 | # IEEE FP. On those that don't support FP at all, usually IEEE |
| 661 | # is emulated. |
| 662 | case ${target_cpu} in |
| 663 | vax | pdp11 ) atof=vax ;; |
| 664 | *) atof=ieee ;; |
| 665 | esac |
| 666 | |
| 667 | case "${obj_format}" in |
| 668 | "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;; |
| 669 | esac |
| 670 | |
| 671 | # Unfortunately the cpu in cpu-opc.h file isn't always $(TARGET_CPU). |
| 672 | cgen_cpu_prefix="" |
| 673 | if test $using_cgen = yes ; then |
| 674 | case ${target_cpu} in |
| 675 | or1knd) |
| 676 | cgen_cpu_prefix=or1k ;; |
| 677 | *) cgen_cpu_prefix=${target_cpu} ;; |
| 678 | esac |
| 679 | AC_SUBST(cgen_cpu_prefix) |
| 680 | AC_DEFINE(USING_CGEN, 1, [Using cgen code?]) |
| 681 | fi |
| 682 | |
| 683 | dnl |
| 684 | dnl Make sure the desired support files exist. |
| 685 | dnl |
| 686 | |
| 687 | if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then |
| 688 | AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type}) |
| 689 | fi |
| 690 | |
| 691 | if test ! -r ${srcdir}/config/obj-${obj_format}.c; then |
| 692 | AC_MSG_ERROR(GAS does not have support for object file format ${obj_format}) |
| 693 | fi |
| 694 | |
| 695 | # Some COFF configurations want these random other flags set. |
| 696 | case ${obj_format} in |
| 697 | coff) |
| 698 | case ${target_cpu_type} in |
| 699 | i386) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;; |
| 700 | x86_64) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;; |
| 701 | esac |
| 702 | ;; |
| 703 | esac |
| 704 | |
| 705 | # Getting this done right is going to be a bitch. Each configuration specified |
| 706 | # with --enable-targets=... should be checked for environment, format, cpu |
| 707 | # setting. |
| 708 | # |
| 709 | # For each configuration, the necessary object file support code must be linked |
| 710 | # in. This might be only one, it might be up to four. The necessary emulation |
| 711 | # code needs to be provided, too. |
| 712 | # |
| 713 | # And then there's "--enable-targets=all".... |
| 714 | # |
| 715 | # For now, just always do it for MIPS ELF configurations. Sigh. |
| 716 | |
| 717 | formats="${obj_format}" |
| 718 | emfiles="" |
| 719 | EMULATIONS="" |
| 720 | GAS_UNIQ(emulations) |
| 721 | for em in . $emulations ; do |
| 722 | case $em in |
| 723 | .) continue ;; |
| 724 | mipsbelf | mipslelf | mipself) |
| 725 | fmt=elf file=mipself ;; |
| 726 | *coff) |
| 727 | fmt=coff file=$em ;; |
| 728 | *aout) |
| 729 | fmt=aout file=$em ;; |
| 730 | *elf) |
| 731 | fmt=elf file=$em ;; |
| 732 | esac |
| 733 | formats="$formats $fmt" |
| 734 | emfiles="$emfiles e-$file.o" |
| 735 | EMULATIONS="$EMULATIONS &$em," |
| 736 | done |
| 737 | GAS_UNIQ(formats) |
| 738 | GAS_UNIQ(emfiles) |
| 739 | if test `set . $formats ; shift ; echo $#` -gt 1 ; then |
| 740 | for fmt in $formats ; do |
| 741 | case $fmt in |
| 742 | aout) AC_DEFINE(OBJ_MAYBE_AOUT, 1, [a.out support?]) ;; |
| 743 | coff) AC_DEFINE(OBJ_MAYBE_COFF, 1, [COFF support?]) ;; |
| 744 | ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF, 1, [ECOFF support?]) ;; |
| 745 | elf) AC_DEFINE(OBJ_MAYBE_ELF, 1, [ELF support?]) ;; |
| 746 | generic) AC_DEFINE(OBJ_MAYBE_GENERIC, 1, [generic support?]) ;; |
| 747 | som) AC_DEFINE(OBJ_MAYBE_SOM, 1, [SOM support?]) ;; |
| 748 | esac |
| 749 | extra_objects="$extra_objects obj-$fmt.o" |
| 750 | done |
| 751 | obj_format=multi |
| 752 | fi |
| 753 | if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then |
| 754 | DEFAULT_EMULATION=`set . $emulations ; echo $2` |
| 755 | # e-mipself has more than one emulation per file, e-i386* has just one at the |
| 756 | # moment. If only one emulation is specified, then don't define |
| 757 | # USE_EMULATIONS or include any of the e-files as they will only be bloat. |
| 758 | case "${obj_format}${emfiles}" in |
| 759 | multi* | *mipself*) |
| 760 | extra_objects="$extra_objects $emfiles" |
| 761 | AC_DEFINE(USE_EMULATIONS, 1, [Use emulation support?]) ;; |
| 762 | esac |
| 763 | fi |
| 764 | AC_SUBST(extra_objects) |
| 765 | AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS, [Supported emulations.]) |
| 766 | AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION", |
| 767 | [Default emulation.]) |
| 768 | |
| 769 | reject_dev_configs=yes |
| 770 | |
| 771 | case ${reject_dev_configs}-${dev} in |
| 772 | yes-yes) # Oops. |
| 773 | AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.) |
| 774 | ;; |
| 775 | esac |
| 776 | |
| 777 | AC_SUBST(target_cpu_type) |
| 778 | AC_SUBST(obj_format) |
| 779 | AC_SUBST(te_file) |
| 780 | AC_SUBST(install_tooldir) |
| 781 | AC_SUBST(atof) |
| 782 | dnl AC_SUBST(emulation) |
| 783 | |
| 784 | # do we need the opcodes library? |
| 785 | case "${need_opcodes}" in |
| 786 | yes) |
| 787 | OPCODES_LIB=../opcodes/libopcodes.la |
| 788 | ;; |
| 789 | esac |
| 790 | |
| 791 | AC_SUBST(OPCODES_LIB) |
| 792 | |
| 793 | AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}", [Target alias.]) |
| 794 | AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}", [Canonical target.]) |
| 795 | AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}", [Target CPU.]) |
| 796 | AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}", [Target vendor.]) |
| 797 | AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}", [Target OS.]) |
| 798 | |
| 799 | AC_PROG_YACC |
| 800 | AM_PROG_LEX |
| 801 | |
| 802 | ALL_LINGUAS="es fi fr id ja ru rw sv tr uk zh_CN" |
| 803 | ZW_GNU_GETTEXT_SISTER_DIR |
| 804 | AM_PO_SUBDIRS |
| 805 | |
| 806 | AM_MAINTAINER_MODE |
| 807 | AM_CONDITIONAL(GENINSRC_NEVER, false) |
| 808 | AC_EXEEXT |
| 809 | |
| 810 | AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h errno.h sys/types.h limits.h locale.h time.h sys/stat.h) |
| 811 | ACX_HEADER_STRING |
| 812 | |
| 813 | # Put this here so that autoconf's "cross-compiling" message doesn't confuse |
| 814 | # people who are not cross-compiling but are compiling cross-assemblers. |
| 815 | AC_MSG_CHECKING(whether compiling a cross-assembler) |
| 816 | if test "${host}" = "${target}"; then |
| 817 | cross_gas=no |
| 818 | else |
| 819 | cross_gas=yes |
| 820 | AC_DEFINE(CROSS_COMPILE, 1, [Compiling cross-assembler?]) |
| 821 | fi |
| 822 | AC_MSG_RESULT($cross_gas) |
| 823 | |
| 824 | dnl ansidecl.h will deal with const |
| 825 | dnl AC_C_CONST |
| 826 | AC_FUNC_ALLOCA |
| 827 | AC_C_INLINE |
| 828 | |
| 829 | # VMS doesn't have unlink. |
| 830 | AC_CHECK_FUNCS(unlink remove, break) |
| 831 | AC_CHECK_FUNCS(sbrk setlocale) |
| 832 | AC_CHECK_FUNCS(strsignal) |
| 833 | |
| 834 | AM_LC_MESSAGES |
| 835 | |
| 836 | # do we need the math library? |
| 837 | case "${need_libm}" in |
| 838 | yes) |
| 839 | LT_LIB_M |
| 840 | AC_SUBST(LIBM) |
| 841 | ;; |
| 842 | esac |
| 843 | |
| 844 | # Some non-ANSI preprocessors botch requoting inside strings. That's bad |
| 845 | # enough, but on some of those systems, the assert macro relies on requoting |
| 846 | # working properly! |
| 847 | GAS_WORKING_ASSERT |
| 848 | |
| 849 | # On some systems, the system header files may not declare malloc, realloc, |
| 850 | # and free. There are places where gas needs these functions to have been |
| 851 | # declared -- such as when taking their addresses. |
| 852 | gas_test_headers=" |
| 853 | #ifdef HAVE_MEMORY_H |
| 854 | #include <memory.h> |
| 855 | #endif |
| 856 | #ifdef HAVE_STRING_H |
| 857 | #include <string.h> |
| 858 | #else |
| 859 | #ifdef HAVE_STRINGS_H |
| 860 | #include <strings.h> |
| 861 | #endif |
| 862 | #endif |
| 863 | #ifdef HAVE_STDLIB_H |
| 864 | #include <stdlib.h> |
| 865 | #endif |
| 866 | #ifdef HAVE_UNISTD_H |
| 867 | #include <unistd.h> |
| 868 | #endif |
| 869 | " |
| 870 | |
| 871 | # Does errno.h declare errno, or do we have to add a separate declaration |
| 872 | # for it? |
| 873 | GAS_CHECK_DECL_NEEDED(errno, f, int f, [ |
| 874 | #ifdef HAVE_ERRNO_H |
| 875 | #include <errno.h> |
| 876 | #endif |
| 877 | ]) |
| 878 | |
| 879 | AC_MSG_CHECKING(for a known getopt prototype in unistd.h) |
| 880 | AC_CACHE_VAL(gas_cv_decl_getopt_unistd_h, |
| 881 | [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([#include <unistd.h>], [extern int getopt (int, char *const*, const char *);])], |
| 882 | gas_cv_decl_getopt_unistd_h=yes, gas_cv_decl_getopt_unistd_h=no)]) |
| 883 | AC_MSG_RESULT($gas_cv_decl_getopt_unistd_h) |
| 884 | if test $gas_cv_decl_getopt_unistd_h = yes; then |
| 885 | AC_DEFINE([HAVE_DECL_GETOPT], 1, |
| 886 | [Is the prototype for getopt in <unistd.h> in the expected format?]) |
| 887 | fi |
| 888 | |
| 889 | GAS_CHECK_DECL_NEEDED(environ, f, char **f, $gas_test_headers) |
| 890 | GAS_CHECK_DECL_NEEDED(ffs, f, int (*f)(int), $gas_test_headers) |
| 891 | GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers) |
| 892 | GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers) |
| 893 | GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers) |
| 894 | GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers) |
| 895 | |
| 896 | AC_CHECK_DECLS([free, getenv, malloc, mempcpy, realloc, stpcpy, strstr, vsnprintf, asprintf]) |
| 897 | |
| 898 | BFD_BINARY_FOPEN |
| 899 | |
| 900 | # Link in zlib if we can. This allows us to write compressed debug sections. |
| 901 | AM_ZLIB |
| 902 | |
| 903 | # Support for VMS timestamps via cross compile |
| 904 | |
| 905 | if test "$ac_cv_header_time_h" = yes; then |
| 906 | GAS_HAVE_TIME_TYPE_MEMBER(struct tm, tm_gmtoff) |
| 907 | fi |
| 908 | |
| 909 | if test "$ac_cv_header_sys_stat_h" = yes; then |
| 910 | GAS_HAVE_SYS_STAT_TYPE_MEMBER(struct stat, st_mtim, tv_sec) |
| 911 | GAS_HAVE_SYS_STAT_TYPE_MEMBER(struct stat, st_mtim, tv_nsec) |
| 912 | fi |
| 913 | |
| 914 | |
| 915 | dnl Required for html, pdf, install-pdf and install-html targets. |
| 916 | AC_SUBST(datarootdir) |
| 917 | AC_SUBST(docdir) |
| 918 | AC_SUBST(htmldir) |
| 919 | AC_SUBST(pdfdir) |
| 920 | |
| 921 | dnl This must come last. |
| 922 | |
| 923 | dnl We used to make symlinks to files in the source directory, but now |
| 924 | dnl we just use the right name for .c files, and create .h files in |
| 925 | dnl the build directory which include the right .h file. Make sure |
| 926 | dnl the old symlinks don't exist, so that a reconfigure in an existing |
| 927 | dnl directory behaves reasonably. |
| 928 | |
| 929 | AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in) |
| 930 | AC_CONFIG_COMMANDS([default], |
| 931 | [rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h |
| 932 | echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h |
| 933 | echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h |
| 934 | echo '#include "te-'"${te_file}"'.h"' > targ-env.h |
| 935 | echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h |
| 936 | if test "x$cgen_cpu_prefix" != x ; then |
| 937 | echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h |
| 938 | fi], |
| 939 | [target_cpu_type=${target_cpu_type} |
| 940 | cgen_cpu_prefix=${cgen_cpu_prefix} |
| 941 | obj_format=${obj_format} |
| 942 | te_file=${te_file}]) |
| 943 | |
| 944 | AC_OUTPUT |