| 1 | dnl Process this file with autoconf to produce a configure script. |
| 2 | dnl |
| 3 | dnl And be careful when changing it! If you must add tests with square |
| 4 | dnl brackets, be sure changequote invocations surround it. |
| 5 | dnl |
| 6 | dnl |
| 7 | dnl v2.5 needed for --bindir et al |
| 8 | AC_PREREQ(2.57) |
| 9 | AC_INIT(as.h) |
| 10 | |
| 11 | dnl Autoconf 2.57 will find the aux dir without this. However, unless |
| 12 | dnl we specify this explicitly, automake-1.7 will assume that ylwrap is in |
| 13 | dnl gas/ instead of gas/../. |
| 14 | AC_CONFIG_AUX_DIR(..) |
| 15 | AC_CANONICAL_SYSTEM |
| 16 | AC_ISC_POSIX |
| 17 | |
| 18 | changequote(,)dnl |
| 19 | BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in` |
| 20 | changequote([,])dnl |
| 21 | AM_INIT_AUTOMAKE(gas, ${BFD_VERSION}) |
| 22 | |
| 23 | AM_PROG_LIBTOOL |
| 24 | |
| 25 | user_bfd_gas= |
| 26 | AC_ARG_ENABLE(bfd-assembler, |
| 27 | [ --enable-bfd-assembler use BFD back end for writing object files], |
| 28 | [case "${enableval}" in |
| 29 | yes) need_bfd=yes user_bfd_gas=yes ;; |
| 30 | no) user_bfd_gas=no ;; |
| 31 | *) AC_MSG_ERROR(bad value ${enableval} given for bfd-assembler option) ;; |
| 32 | esac])dnl |
| 33 | AC_ARG_ENABLE(targets, |
| 34 | [ targets alternative target configurations besides the primary], |
| 35 | [case "${enableval}" in |
| 36 | yes | "") AC_ERROR(enable-targets option must specify target names or 'all') |
| 37 | ;; |
| 38 | no) enable_targets= ;; |
| 39 | *) enable_targets=$enableval ;; |
| 40 | esac])dnl |
| 41 | AC_ARG_ENABLE(commonbfdlib, |
| 42 | [ --enable-commonbfdlib build shared BFD/opcodes/libiberty library], |
| 43 | [case "${enableval}" in |
| 44 | yes) commonbfdlib=true ;; |
| 45 | no) commonbfdlib=false ;; |
| 46 | *) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;; |
| 47 | esac])dnl |
| 48 | |
| 49 | using_cgen=no |
| 50 | |
| 51 | build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes" |
| 52 | AC_ARG_ENABLE(build-warnings, |
| 53 | [ --enable-build-warnings Enable build-time compiler warnings if gcc is used], |
| 54 | [case "${enableval}" in |
| 55 | yes) ;; |
| 56 | no) build_warnings="-w";; |
| 57 | ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"` |
| 58 | build_warnings="${build_warnings} ${t}";; |
| 59 | *,) t=`echo "${enableval}" | sed -e "s/,/ /g"` |
| 60 | build_warnings="${t} ${build_warnings}";; |
| 61 | *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; |
| 62 | esac |
| 63 | if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then |
| 64 | echo "Setting warning flags = $build_warnings" 6>&1 |
| 65 | fi])dnl |
| 66 | WARN_CFLAGS="" |
| 67 | if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then |
| 68 | WARN_CFLAGS="${build_warnings}" |
| 69 | fi |
| 70 | AC_SUBST(WARN_CFLAGS) |
| 71 | |
| 72 | # Generate a header file |
| 73 | AM_CONFIG_HEADER(config.h:config.in) |
| 74 | |
| 75 | # If we are on a DOS filesystem, we must use gdb.ini rather than |
| 76 | # .gdbinit. |
| 77 | case "${host}" in |
| 78 | *-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-windows*) |
| 79 | GDBINIT="gdb.ini" |
| 80 | AC_CONFIG_FILES(gdb.ini:gdbinit.in) |
| 81 | ;; |
| 82 | *) |
| 83 | GDBINIT=".gdbinit" |
| 84 | AC_CONFIG_FILES(.gdbinit:gdbinit.in) |
| 85 | ;; |
| 86 | esac |
| 87 | AC_SUBST(GDBINIT) |
| 88 | |
| 89 | te_file=generic |
| 90 | |
| 91 | # Makefile target for installing gas in $(tooldir)/bin. |
| 92 | install_tooldir=install-exec-tooldir |
| 93 | |
| 94 | canon_targets="" |
| 95 | all_targets=no |
| 96 | if test -n "$enable_targets" ; then |
| 97 | for t in `echo $enable_targets | sed 's/,/ /g'`; do |
| 98 | if test $t = "all"; then |
| 99 | all_targets=yes |
| 100 | continue |
| 101 | fi |
| 102 | result=`$ac_config_sub $t 2>/dev/null` |
| 103 | if test -n "$result" ; then |
| 104 | canon_targets="$canon_targets $result" |
| 105 | # else |
| 106 | # # Permit "all", etc. We don't support it yet though. |
| 107 | # canon_targets="$canon_targets $t" |
| 108 | fi |
| 109 | done |
| 110 | GAS_UNIQ(canon_targets) |
| 111 | fi |
| 112 | |
| 113 | emulations="" |
| 114 | |
| 115 | for this_target in $target $canon_targets ; do |
| 116 | |
| 117 | targ=${this_target} |
| 118 | . ${srcdir}/configure.tgt |
| 119 | |
| 120 | case ${target_cpu} in |
| 121 | crisv32) |
| 122 | AC_DEFINE_UNQUOTED(DEFAULT_CRIS_ARCH, $arch, |
| 123 | [Default CRIS architecture.]) |
| 124 | ;; |
| 125 | esac |
| 126 | |
| 127 | if test ${this_target} = $target ; then |
| 128 | target_cpu_type=${cpu_type} |
| 129 | elif test ${target_cpu_type} != ${cpu_type} ; then |
| 130 | continue |
| 131 | fi |
| 132 | |
| 133 | generic_target=${cpu_type}-${target_vendor}-${target_os} |
| 134 | case ${generic_target} in |
| 135 | i386-*-sco3.2v5*) |
| 136 | if test ${this_target} = $target; then |
| 137 | AC_DEFINE(SCO_ELF, 1, [Define if defaulting to ELF on SCO 5.]) |
| 138 | fi |
| 139 | ;; |
| 140 | |
| 141 | i386-*-msdosdjgpp* \ |
| 142 | | i386-*-go32* \ |
| 143 | | i386-go32-rtems*) |
| 144 | AC_DEFINE(STRICTCOFF, 1, [Using strict COFF?]) |
| 145 | ;; |
| 146 | |
| 147 | i860-*-*) |
| 148 | AC_MSG_WARN(GAS support for ${generic_target} is preliminary and a work in progress) |
| 149 | ;; |
| 150 | |
| 151 | mips-sony-bsd*) |
| 152 | ;; |
| 153 | mips-*-bsd*) |
| 154 | AC_MSG_ERROR(Unknown vendor for mips-bsd configuration.) |
| 155 | ;; |
| 156 | |
| 157 | ppc-*-aix5.*) |
| 158 | AC_DEFINE(AIX_WEAK_SUPPORT, 1, |
| 159 | [Define if using AIX 5.2 value for C_WEAKEXT.]) |
| 160 | ;; |
| 161 | ppc-*-linux-gnu*) |
| 162 | case "$endian" in |
| 163 | big) ;; |
| 164 | *) AC_MSG_ERROR(GNU/Linux must be configured big endian) ;; |
| 165 | esac |
| 166 | ;; |
| 167 | ppc-*-solaris*) |
| 168 | if test ${this_target} = $target; then |
| 169 | AC_DEFINE(TARGET_SOLARIS_COMMENT, 1, |
| 170 | [Define if default target is PowerPC Solaris.]) |
| 171 | fi |
| 172 | if test x${endian} = xbig; then |
| 173 | AC_MSG_ERROR(Solaris must be configured little endian) |
| 174 | fi |
| 175 | ;; |
| 176 | |
| 177 | sh*-*-symbianelf*) |
| 178 | AC_DEFINE(TARGET_SYMBIAN, 1, [Define if target is Symbian OS.]) |
| 179 | ;; |
| 180 | esac |
| 181 | |
| 182 | if test ${this_target} = $target ; then |
| 183 | endian_def= |
| 184 | if test x${endian} = xbig; then |
| 185 | endian_def=1 |
| 186 | elif test x${endian} = xlittle; then |
| 187 | endian_def=0 |
| 188 | fi |
| 189 | if test x${endian_def} != x; then |
| 190 | AC_DEFINE_UNQUOTED(TARGET_BYTES_BIG_ENDIAN, $endian_def, |
| 191 | [Define as 1 if big endian.]) |
| 192 | fi |
| 193 | fi |
| 194 | |
| 195 | # Other random stuff. |
| 196 | |
| 197 | case ${cpu_type} in |
| 198 | mips) |
| 199 | # Set mips_cpu to the name of the default CPU. |
| 200 | case ${target_cpu} in |
| 201 | mips | mipsbe | mipseb | mipsle | mipsel | mips64 | mips64el) |
| 202 | mips_cpu=from-abi |
| 203 | ;; |
| 204 | mipsisa32 | mipsisa32el) |
| 205 | mips_cpu=mips32 |
| 206 | ;; |
| 207 | mipsisa32r2 | mipsisa32r2el) |
| 208 | mips_cpu=mips32r2 |
| 209 | ;; |
| 210 | mipsisa64 | mipsisa64el) |
| 211 | mips_cpu=mips64 |
| 212 | ;; |
| 213 | mipsisa64r2 | mipsisa64r2el) |
| 214 | mips_cpu=mips64r2 |
| 215 | ;; |
| 216 | mipstx39 | mipstx39el) |
| 217 | mips_cpu=r3900 |
| 218 | ;; |
| 219 | mips64vr | mips64vrel) |
| 220 | mips_cpu=vr4100 |
| 221 | ;; |
| 222 | mipsisa32r2* | mipsisa64r2*) |
| 223 | changequote(,)dnl |
| 224 | mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..r2//' -e 's/el$//'` |
| 225 | changequote([,])dnl |
| 226 | ;; |
| 227 | mips64* | mipsisa64* | mipsisa32*) |
| 228 | changequote(,)dnl |
| 229 | mips_cpu=`echo $target_cpu | sed -e 's/[a-z]*..//' -e 's/el$//'` |
| 230 | changequote([,])dnl |
| 231 | ;; |
| 232 | *) |
| 233 | AC_ERROR($target_cpu isn't a supported MIPS CPU name) |
| 234 | ;; |
| 235 | esac |
| 236 | # See whether it's appropriate to set E_MIPS_ABI_O32 for o32 |
| 237 | # binaries. It's a GNU extension that some OSes don't understand. |
| 238 | # The value only matters on ELF targets. |
| 239 | case ${target} in |
| 240 | *-*-irix*) |
| 241 | use_e_mips_abi_o32=0 |
| 242 | ;; |
| 243 | *) |
| 244 | use_e_mips_abi_o32=1 |
| 245 | ;; |
| 246 | esac |
| 247 | # Decide whether to generate 32-bit or 64-bit code by default. |
| 248 | # Used to resolve -march=from-abi when an embedded ABI is selected. |
| 249 | case ${target} in |
| 250 | mips64*-*-* | mipsisa64*-*-*) |
| 251 | mips_default_64bit=1 |
| 252 | ;; |
| 253 | *) |
| 254 | mips_default_64bit=0 |
| 255 | ;; |
| 256 | esac |
| 257 | # Decide which ABI to target by default. |
| 258 | case ${target} in |
| 259 | mips64*-linux* | mips-sgi-irix6*) |
| 260 | mips_default_abi=N32_ABI |
| 261 | ;; |
| 262 | mips*-linux*) |
| 263 | mips_default_abi=O32_ABI |
| 264 | ;; |
| 265 | *) |
| 266 | mips_default_abi=NO_ABI |
| 267 | ;; |
| 268 | esac |
| 269 | AC_DEFINE_UNQUOTED(MIPS_CPU_STRING_DEFAULT, "$mips_cpu", |
| 270 | [Default CPU for MIPS targets. ]) |
| 271 | AC_DEFINE_UNQUOTED(USE_E_MIPS_ABI_O32, $use_e_mips_abi_o32, |
| 272 | [Allow use of E_MIPS_ABI_O32 on MIPS targets. ]) |
| 273 | AC_DEFINE_UNQUOTED(MIPS_DEFAULT_64BIT, $mips_default_64bit, |
| 274 | [Generate 64-bit code by default on MIPS targets. ]) |
| 275 | AC_DEFINE_UNQUOTED(MIPS_DEFAULT_ABI, $mips_default_abi, |
| 276 | [Choose a default ABI for MIPS targets. ]) |
| 277 | ;; |
| 278 | esac |
| 279 | |
| 280 | # Do we need the opcodes library? |
| 281 | case ${cpu_type} in |
| 282 | vax | i386 | tic30) |
| 283 | ;; |
| 284 | |
| 285 | *) |
| 286 | need_opcodes=yes |
| 287 | |
| 288 | case "${enable_shared}" in |
| 289 | yes) shared_opcodes=true ;; |
| 290 | *opcodes*) shared_opcodes=true ;; |
| 291 | *) shared_opcodes=false ;; |
| 292 | esac |
| 293 | if test "${shared_opcodes}" = "true"; then |
| 294 | # A shared libopcodes must be linked against libbfd. |
| 295 | need_bfd=yes |
| 296 | fi |
| 297 | ;; |
| 298 | esac |
| 299 | |
| 300 | # Any other special object files needed ? |
| 301 | case ${cpu_type} in |
| 302 | fr30 | ip2k | iq2000 | m32r | openrisc) |
| 303 | using_cgen=yes |
| 304 | ;; |
| 305 | |
| 306 | frv) |
| 307 | using_cgen=yes |
| 308 | ;; |
| 309 | m68k) |
| 310 | case ${extra_objects} in |
| 311 | *m68k-parse.o*) ;; |
| 312 | *) extra_objects="$extra_objects m68k-parse.o" ;; |
| 313 | esac |
| 314 | ;; |
| 315 | |
| 316 | mips) |
| 317 | echo ${extra_objects} | grep -s "itbl-parse.o" |
| 318 | if test $? -ne 0 ; then |
| 319 | extra_objects="$extra_objects itbl-parse.o" |
| 320 | fi |
| 321 | |
| 322 | echo ${extra_objects} | grep -s "itbl-lex.o" |
| 323 | if test $? -ne 0 ; then |
| 324 | extra_objects="$extra_objects itbl-lex.o" |
| 325 | fi |
| 326 | |
| 327 | echo ${extra_objects} | grep -s "itbl-ops.o" |
| 328 | if test $? -ne 0 ; then |
| 329 | extra_objects="$extra_objects itbl-ops.o" |
| 330 | fi |
| 331 | ;; |
| 332 | |
| 333 | i386 | s390 | sparc) |
| 334 | if test $this_target = $target ; then |
| 335 | AC_DEFINE_UNQUOTED(DEFAULT_ARCH, "${arch}", [Default architecture.]) |
| 336 | fi |
| 337 | ;; |
| 338 | |
| 339 | xstormy16) |
| 340 | using_cgen=yes |
| 341 | ;; |
| 342 | |
| 343 | xtensa) |
| 344 | echo ${extra_objects} | grep -s "xtensa-relax.o" |
| 345 | if test $? -ne 0 ; then |
| 346 | extra_objects="$extra_objects xtensa-relax.o" |
| 347 | fi |
| 348 | ;; |
| 349 | |
| 350 | *) |
| 351 | ;; |
| 352 | esac |
| 353 | |
| 354 | if test $using_cgen = yes ; then |
| 355 | case "x${extra_objects}" in |
| 356 | *cgen.o*) ;; |
| 357 | *) extra_objects="$extra_objects cgen.o" ;; |
| 358 | esac |
| 359 | fi |
| 360 | |
| 361 | # See if we really can support this configuration with the emulation code. |
| 362 | |
| 363 | if test $this_target = $target ; then |
| 364 | primary_bfd_gas=$bfd_gas |
| 365 | obj_format=$fmt |
| 366 | te_file=$em |
| 367 | |
| 368 | if test $bfd_gas = no ; then |
| 369 | # Can't support other configurations this way. |
| 370 | break |
| 371 | fi |
| 372 | elif test $bfd_gas = no ; then |
| 373 | # Can't support this configuration. |
| 374 | break |
| 375 | fi |
| 376 | |
| 377 | # From target name and format, produce a list of supported emulations. |
| 378 | |
| 379 | case ${generic_target}-${fmt} in |
| 380 | mips-*-irix5*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;; |
| 381 | mips*-*-linux*-*) case "$endian" in |
| 382 | big) emulation="mipsbelf mipslelf mipself" ;; |
| 383 | *) emulation="mipslelf mipsbelf mipself" ;; |
| 384 | esac ;; |
| 385 | mips-*-lnews*-ecoff) ;; |
| 386 | mips-*-*-ecoff) case "$endian" in |
| 387 | big) emulation="mipsbecoff mipslecoff mipsecoff" ;; |
| 388 | *) emulation="mipslecoff mipsbecoff mipsecoff" ;; |
| 389 | esac ;; |
| 390 | mips-*-*-elf) case "$endian" in |
| 391 | big) emulation="mipsbelf mipslelf mipself" ;; |
| 392 | *) emulation="mipslelf mipsbelf mipself" ;; |
| 393 | esac ;; |
| 394 | mips-*-sysv4*MP*-*) emulation="mipsbelf mipslelf mipself mipsbecoff mipslecoff mipsecoff" ;; |
| 395 | # i386-pc-pe-coff != i386-pc-coff. |
| 396 | i386-*-pe-coff) ;; |
| 397 | # Uncommenting the next line will turn on support for i386 AOUT |
| 398 | # for the default linux configuration |
| 399 | # i386-*-linux*-elf) emulation="i386elf i386aout" ;; |
| 400 | # |
| 401 | i386-*-aout) emulation="i386aout" ;; |
| 402 | i386-*-coff) emulation="i386coff" ;; |
| 403 | i386-*-elf) emulation="i386elf" ;; |
| 404 | |
| 405 | # Always all formats. The first stated emulation becomes the default. |
| 406 | cris-*-*aout*) emulation="crisaout criself" ;; |
| 407 | cris-*-*) emulation="criself crisaout" ;; |
| 408 | esac |
| 409 | |
| 410 | emulations="$emulations $emulation" |
| 411 | |
| 412 | done |
| 413 | |
| 414 | # Turn on all targets if possible |
| 415 | if test ${all_targets} = "yes"; then |
| 416 | case ${target_cpu_type} in |
| 417 | i386) |
| 418 | case ${obj_format} in |
| 419 | aout) |
| 420 | emulations="$emulations i386coff i386elf" |
| 421 | ;; |
| 422 | coff) |
| 423 | emulations="$emulations i386aout i386elf" |
| 424 | ;; |
| 425 | elf) |
| 426 | emulations="$emulations i386aout i386coff" |
| 427 | ;; |
| 428 | esac |
| 429 | ;; |
| 430 | esac |
| 431 | fi |
| 432 | |
| 433 | # Assign floating point type. Most processors with FP support |
| 434 | # IEEE FP. On those that don't support FP at all, usually IEEE |
| 435 | # is emulated. |
| 436 | case ${target_cpu} in |
| 437 | vax | tahoe ) atof=${target_cpu} ;; |
| 438 | pdp11) atof=vax ;; |
| 439 | *) atof=ieee ;; |
| 440 | esac |
| 441 | |
| 442 | case "${obj_format}" in |
| 443 | "") AC_MSG_ERROR(GAS does not know what format to use for target ${target}) ;; |
| 444 | esac |
| 445 | |
| 446 | # Unfortunately the cpu in cpu-opc.h file isn't always $(TARGET_CPU). |
| 447 | cgen_cpu_prefix="" |
| 448 | if test $using_cgen = yes ; then |
| 449 | case ${target_cpu} in |
| 450 | *) cgen_cpu_prefix=${target_cpu} ;; |
| 451 | esac |
| 452 | AC_SUBST(cgen_cpu_prefix) |
| 453 | AC_DEFINE(USING_CGEN, 1, [Using cgen code?]) |
| 454 | fi |
| 455 | |
| 456 | dnl |
| 457 | dnl Make sure the desired support files exist. |
| 458 | dnl |
| 459 | |
| 460 | if test ! -r ${srcdir}/config/tc-${target_cpu_type}.c; then |
| 461 | AC_MSG_ERROR(GAS does not support target CPU ${target_cpu_type}) |
| 462 | fi |
| 463 | |
| 464 | if test ! -r ${srcdir}/config/obj-${obj_format}.c; then |
| 465 | AC_MSG_ERROR(GAS does not have support for object file format ${obj_format}) |
| 466 | fi |
| 467 | |
| 468 | case ${user_bfd_gas}-${primary_bfd_gas} in |
| 469 | yes-yes | no-no) |
| 470 | # We didn't override user's choice. |
| 471 | ;; |
| 472 | no-yes) |
| 473 | AC_MSG_WARN(Use of BFD is required for ${target}; overriding config options.) |
| 474 | ;; |
| 475 | no-preferred) |
| 476 | primary_bfd_gas=no |
| 477 | ;; |
| 478 | *-preferred) |
| 479 | primary_bfd_gas=yes |
| 480 | ;; |
| 481 | yes-*) |
| 482 | primary_bfd_gas=yes |
| 483 | ;; |
| 484 | -*) |
| 485 | # User specified nothing. |
| 486 | ;; |
| 487 | esac |
| 488 | |
| 489 | # Some COFF configurations want these random other flags set. |
| 490 | case ${obj_format} in |
| 491 | coff) |
| 492 | case ${target_cpu_type} in |
| 493 | i386) AC_DEFINE(I386COFF, 1, [Using i386 COFF?]) ;; |
| 494 | m68k) AC_DEFINE(M68KCOFF, 1, [Using m68k COFF?]) ;; |
| 495 | m88k) AC_DEFINE(M88KCOFF, 1, [Using m88k COFF?]) ;; |
| 496 | esac |
| 497 | ;; |
| 498 | esac |
| 499 | |
| 500 | # Getting this done right is going to be a bitch. Each configuration specified |
| 501 | # with --enable-targets=... should be checked for environment, format, cpu, and |
| 502 | # bfd_gas setting. |
| 503 | # |
| 504 | # For each configuration, the necessary object file support code must be linked |
| 505 | # in. This might be only one, it might be up to four. The necessary emulation |
| 506 | # code needs to be provided, too. |
| 507 | # |
| 508 | # And then there's "--enable-targets=all".... |
| 509 | # |
| 510 | # For now, just always do it for MIPS ELF or ECOFF configurations. Sigh. |
| 511 | |
| 512 | formats="${obj_format}" |
| 513 | emfiles="" |
| 514 | EMULATIONS="" |
| 515 | GAS_UNIQ(emulations) |
| 516 | for em in . $emulations ; do |
| 517 | case $em in |
| 518 | .) continue ;; |
| 519 | mipsbelf | mipslelf | mipself) |
| 520 | fmt=elf file=mipself ;; |
| 521 | mipsbecoff | mipslecoff | mipsecoff) |
| 522 | fmt=ecoff file=mipsecoff ;; |
| 523 | *coff) |
| 524 | fmt=coff file=$em ;; |
| 525 | *aout) |
| 526 | fmt=aout file=$em ;; |
| 527 | *elf) |
| 528 | fmt=elf file=$em ;; |
| 529 | esac |
| 530 | formats="$formats $fmt" |
| 531 | emfiles="$emfiles e-$file.o" |
| 532 | EMULATIONS="$EMULATIONS &$em," |
| 533 | done |
| 534 | GAS_UNIQ(formats) |
| 535 | GAS_UNIQ(emfiles) |
| 536 | if test `set . $formats ; shift ; echo $#` -gt 1 ; then |
| 537 | for fmt in $formats ; do |
| 538 | case $fmt in |
| 539 | aout) AC_DEFINE(OBJ_MAYBE_AOUT, 1, [a.out support?]) ;; |
| 540 | bout) AC_DEFINE(OBJ_MAYBE_BOUT, 1, [b.out support?]) ;; |
| 541 | coff) AC_DEFINE(OBJ_MAYBE_COFF, 1, [COFF support?]) ;; |
| 542 | ecoff) AC_DEFINE(OBJ_MAYBE_ECOFF, 1, [ECOFF support?]) ;; |
| 543 | elf) AC_DEFINE(OBJ_MAYBE_ELF, 1, [ELF support?]) ;; |
| 544 | generic) AC_DEFINE(OBJ_MAYBE_GENERIC, 1, [generic support?]) ;; |
| 545 | hp300) AC_DEFINE(OBJ_MAYBE_HP300, 1, [HP300 support?]) ;; |
| 546 | ieee) AC_DEFINE(OBJ_MAYBE_IEEE, 1, [IEEE support?]) ;; |
| 547 | som) AC_DEFINE(OBJ_MAYBE_SOM, 1, [SOM support?]) ;; |
| 548 | vms) AC_DEFINE(OBJ_MAYBE_VMS, 1, [VMS support?]) ;; |
| 549 | esac |
| 550 | extra_objects="$extra_objects obj-$fmt.o" |
| 551 | done |
| 552 | obj_format=multi |
| 553 | fi |
| 554 | if test `set . $emfiles ; shift ; echo $#` -gt 0 ; then |
| 555 | DEFAULT_EMULATION=`set . $emulations ; echo $2` |
| 556 | # e-mips* has more than one emulation per file, e-i386* has just one at the |
| 557 | # moment. If only one emulation is specified, then don't define |
| 558 | # USE_EMULATIONS or include any of the e-files as they will only be bloat. |
| 559 | case "${obj_format}${emfiles}" in |
| 560 | multi* | *mips*) |
| 561 | extra_objects="$extra_objects $emfiles" |
| 562 | AC_DEFINE(USE_EMULATIONS, 1, [Use emulation support?]) ;; |
| 563 | esac |
| 564 | fi |
| 565 | AC_SUBST(extra_objects) |
| 566 | AC_DEFINE_UNQUOTED(EMULATIONS, $EMULATIONS, [Supported emulations.]) |
| 567 | AC_DEFINE_UNQUOTED(DEFAULT_EMULATION, "$DEFAULT_EMULATION", |
| 568 | [Default emulation.]) |
| 569 | |
| 570 | case ${primary_bfd_gas}-${target_cpu_type}-${obj_format} in |
| 571 | yes-*-coff) need_bfd=yes ;; |
| 572 | no-*-coff) need_bfd=yes |
| 573 | AC_DEFINE(MANY_SEGMENTS, 1, [old COFF support?]) ;; |
| 574 | esac |
| 575 | |
| 576 | reject_dev_configs=yes |
| 577 | |
| 578 | case ${reject_dev_configs}-${dev} in |
| 579 | yes-yes) # Oops. |
| 580 | AC_MSG_ERROR(GAS does not support the ${generic_target} configuration.) |
| 581 | ;; |
| 582 | esac |
| 583 | |
| 584 | AC_SUBST(target_cpu_type) |
| 585 | AC_SUBST(obj_format) |
| 586 | AC_SUBST(te_file) |
| 587 | AC_SUBST(install_tooldir) |
| 588 | AC_SUBST(atof) |
| 589 | dnl AC_SUBST(emulation) |
| 590 | |
| 591 | case "${primary_bfd_gas}" in |
| 592 | yes) AC_DEFINE(BFD_ASSEMBLER, 1, [Use BFD interface?]) |
| 593 | need_bfd=yes ;; |
| 594 | esac |
| 595 | |
| 596 | # do we need the opcodes library? |
| 597 | case "${need_opcodes}" in |
| 598 | yes) |
| 599 | OPCODES_LIB=../opcodes/libopcodes.la |
| 600 | ;; |
| 601 | esac |
| 602 | |
| 603 | case "${need_bfd}" in |
| 604 | yes) |
| 605 | BFDLIB=../bfd/libbfd.la |
| 606 | BFDVER_H=../bfd/bfdver.h |
| 607 | ALL_OBJ_DEPS="$ALL_OBJ_DEPS"' ../bfd/bfd.h $(INCDIR)/symcat.h' |
| 608 | ;; |
| 609 | esac |
| 610 | |
| 611 | AC_SUBST(BFDLIB) |
| 612 | AC_SUBST(OPCODES_LIB) |
| 613 | |
| 614 | AC_SUBST(BFDVER_H) |
| 615 | AC_SUBST(ALL_OBJ_DEPS) |
| 616 | |
| 617 | AC_DEFINE_UNQUOTED(TARGET_ALIAS, "${target_alias}", [Target alias.]) |
| 618 | AC_DEFINE_UNQUOTED(TARGET_CANONICAL, "${target}", [Canonical target.]) |
| 619 | AC_DEFINE_UNQUOTED(TARGET_CPU, "${target_cpu}", [Target CPU.]) |
| 620 | AC_DEFINE_UNQUOTED(TARGET_VENDOR, "${target_vendor}", [Target vendor.]) |
| 621 | AC_DEFINE_UNQUOTED(TARGET_OS, "${target_os}", [Target OS.]) |
| 622 | |
| 623 | AC_PROG_CC |
| 624 | |
| 625 | AC_PROG_YACC |
| 626 | AM_PROG_LEX |
| 627 | |
| 628 | ALL_LINGUAS="fr tr es" |
| 629 | CY_GNU_GETTEXT |
| 630 | |
| 631 | AM_MAINTAINER_MODE |
| 632 | AC_EXEEXT |
| 633 | |
| 634 | AC_CHECK_HEADERS(string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h) |
| 635 | |
| 636 | # Put this here so that autoconf's "cross-compiling" message doesn't confuse |
| 637 | # people who are not cross-compiling but are compiling cross-assemblers. |
| 638 | AC_MSG_CHECKING(whether compiling a cross-assembler) |
| 639 | if test "${host}" = "${target}"; then |
| 640 | cross_gas=no |
| 641 | else |
| 642 | cross_gas=yes |
| 643 | AC_DEFINE(CROSS_COMPILE, 1, [Compiling cross-assembler?]) |
| 644 | fi |
| 645 | AC_MSG_RESULT($cross_gas) |
| 646 | |
| 647 | dnl ansidecl.h will deal with const |
| 648 | dnl AC_CONST |
| 649 | AC_FUNC_ALLOCA |
| 650 | AC_C_INLINE |
| 651 | |
| 652 | # VMS doesn't have unlink. |
| 653 | AC_CHECK_FUNCS(unlink remove, break) |
| 654 | |
| 655 | # Some systems don't have sbrk(). |
| 656 | AC_CHECK_FUNCS(sbrk) |
| 657 | |
| 658 | # do we need the math library? |
| 659 | case "${need_libm}" in |
| 660 | yes) |
| 661 | AC_CHECK_LIBM |
| 662 | AC_SUBST(LIBM) |
| 663 | ;; |
| 664 | esac |
| 665 | |
| 666 | # Some non-ANSI preprocessors botch requoting inside strings. That's bad |
| 667 | # enough, but on some of those systems, the assert macro relies on requoting |
| 668 | # working properly! |
| 669 | GAS_WORKING_ASSERT |
| 670 | |
| 671 | # On some systems, the system header files may not declare malloc, realloc, |
| 672 | # and free. There are places where gas needs these functions to have been |
| 673 | # declared -- such as when taking their addresses. |
| 674 | gas_test_headers=" |
| 675 | #ifdef HAVE_MEMORY_H |
| 676 | #include <memory.h> |
| 677 | #endif |
| 678 | #ifdef HAVE_STRING_H |
| 679 | #include <string.h> |
| 680 | #else |
| 681 | #ifdef HAVE_STRINGS_H |
| 682 | #include <strings.h> |
| 683 | #endif |
| 684 | #endif |
| 685 | #ifdef HAVE_STDLIB_H |
| 686 | #include <stdlib.h> |
| 687 | #endif |
| 688 | #ifdef HAVE_UNISTD_H |
| 689 | #include <unistd.h> |
| 690 | #endif |
| 691 | " |
| 692 | GAS_CHECK_DECL_NEEDED(strstr, f, char *(*f)(), $gas_test_headers) |
| 693 | GAS_CHECK_DECL_NEEDED(malloc, f, char *(*f)(), $gas_test_headers) |
| 694 | GAS_CHECK_DECL_NEEDED(free, f, void (*f)(), $gas_test_headers) |
| 695 | GAS_CHECK_DECL_NEEDED(sbrk, f, char *(*f)(), $gas_test_headers) |
| 696 | GAS_CHECK_DECL_NEEDED(environ, f, char **f, $gas_test_headers) |
| 697 | |
| 698 | # Does errno.h declare errno, or do we have to add a separate declaration |
| 699 | # for it? |
| 700 | GAS_CHECK_DECL_NEEDED(errno, f, int f, [ |
| 701 | #ifdef HAVE_ERRNO_H |
| 702 | #include <errno.h> |
| 703 | #endif |
| 704 | ]) |
| 705 | |
| 706 | dnl This must come last. |
| 707 | |
| 708 | dnl We used to make symlinks to files in the source directory, but now |
| 709 | dnl we just use the right name for .c files, and create .h files in |
| 710 | dnl the build directory which include the right .h file. Make sure |
| 711 | dnl the old symlinks don't exist, so that a reconfigure in an existing |
| 712 | dnl directory behaves reasonably. |
| 713 | |
| 714 | AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in) |
| 715 | AC_CONFIG_COMMANDS([default], |
| 716 | [rm -f targ-cpu.c targ-cpu.h obj-format.h obj-format.c targ-env.h atof-targ.c itbl-cpu.h |
| 717 | echo '#include "tc-'"${target_cpu_type}"'.h"' > targ-cpu.h |
| 718 | echo '#include "obj-'"${obj_format}"'.h"' > obj-format.h |
| 719 | echo '#include "te-'"${te_file}"'.h"' > targ-env.h |
| 720 | echo '#include "itbl-'"${target_cpu_type}"'.h"' > itbl-cpu.h |
| 721 | if test "x$cgen_cpu_prefix" != x ; then |
| 722 | echo '#include "opcodes/'"${cgen_cpu_prefix}"'-desc.h"' > cgen-desc.h |
| 723 | fi |
| 724 | |
| 725 | sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile], |
| 726 | [target_cpu_type=${target_cpu_type} |
| 727 | cgen_cpu_prefix=${cgen_cpu_prefix} |
| 728 | obj_format=${obj_format} |
| 729 | te_file=${te_file}]) |
| 730 | |
| 731 | AC_OUTPUT |