| 1 | Wed Jul 26 23:33:34 1995 Michael Meissner <meissner@cygnus.com> |
| 2 | |
| 3 | * config/rs6000/tm-rs6000.h (rs6000_framedata): Add offsets the |
| 4 | gprs, fprs, lr, and cr is stored at. |
| 5 | (FRAME_FIND_SAVED_REGS): Use new fields in rs6000_framedata. |
| 6 | (function_frame_info): Delete declaration. |
| 7 | (SKIP_PROLOGUE): Skip_prologue is now passed a rs6000_framedata |
| 8 | structure to fill in. |
| 9 | (FRAMELESS_FUNCTION_INVOCATION): Function now longer takes a |
| 10 | second argument. |
| 11 | (FRAME_SAVED_PC): Call frame_saved_pc. |
| 12 | |
| 13 | * rs6000-tdep.c (skip_prologue): Recognize V.4 prologues as well |
| 14 | as AIX style. Fill in rs6000_framedata structure. Remember where |
| 15 | the gprs, fprs, cr, and lr are saved. |
| 16 | (pop_frame): Use skip_prologue, not function_frame_info, and use |
| 17 | new rs6000_framedata fields. |
| 18 | (function_frame_info): Function deleted. |
| 19 | (frameless_function_invocation): Separate frame_saved_pc support |
| 20 | to new function. Recognize V.4 frames. |
| 21 | (frame_saved_pc): New function. |
| 22 | (frame_get_cache_fsr): Use skip_prologue, not function_frame_info. |
| 23 | (frame_initial_stack_address): Ditto. |
| 24 | |
| 25 | Wed Jul 26 01:00:37 1995 Jeff Law (law@snake.cs.utah.edu) |
| 26 | |
| 27 | * remote.c: Add documentation for extended protocol operations |
| 28 | and for thread_alive change from a couple weeks ago. |
| 29 | (extended_remote_ops): Declare and define a new target vector |
| 30 | for the extended remote protocol. |
| 31 | (extended_remote_restart): New function to restart the remote |
| 32 | server & process. |
| 33 | (remote_open): Just a stub routine. |
| 34 | (extended_remote_open): New function to start a remote session |
| 35 | using the extended gdb remote protocol. |
| 36 | (remote_open_1): New function containing code common to both |
| 37 | remote_open and extended_remote_open. |
| 38 | (remote_mourn, extended_remote_mourn, remote_mourn_1): Similarly. |
| 39 | (extended_remote_create_inferior): New function for the extended |
| 40 | remote target. |
| 41 | (initialize_remote): Add the extended_remote_ops target vector. |
| 42 | * gdbserver/server.c (main, case '!'): Set extended_protocol. |
| 43 | (main, case 'k'): If the extended protocol is in use, kill the |
| 44 | inferior then start a new one. |
| 45 | (main, case 'R'): New command to restart the remote server and |
| 46 | inferior process. Only supported when using the extended |
| 47 | protocol. |
| 48 | (main, server loop): If the inferior terminates while using the |
| 49 | extended protocol then start a new one. If getpkt fails when |
| 50 | using the extended protocol then exit. |
| 51 | |
| 52 | Tue Jul 25 11:43:44 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 53 | |
| 54 | * mdebugread.c (psymtab_to_symtab_1): Relocate encoded stab |
| 55 | line numbers using the psymtab's section offsets. |
| 56 | |
| 57 | Tue Jul 25 10:43:27 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| 58 | |
| 59 | * config/rs6000/tm-rs6000.h (rs6000_framedata): Rename from |
| 60 | aix_framedata. Change all uses. |
| 61 | * rs6000-tdep.c: Change all aix_framedata -> rs6000_framedata. |
| 62 | |
| 63 | Sat Jul 22 23:44:18 1995 Jeff Law (law@snake.cs.utah.edu) |
| 64 | |
| 65 | * defs.h (ATTR_FORMAT): Disable if ANSI_PROTOTYPES is not defined. |
| 66 | |
| 67 | Fri Jul 21 16:50:28 1995 Jeffrey A. Law <law@rtl.cygnus.com> |
| 68 | |
| 69 | * lynx-nat.c (child_thread_alive): New function. Somehow I |
| 70 | forgot to check this in with all the other thread_alive changes. |
| 71 | |
| 72 | Thu Jul 20 22:22:34 1995 Jeff Law (law@snake.cs.utah.edu) |
| 73 | |
| 74 | * somread.c (som_symtab_read): Add unsatisfied common symbols to |
| 75 | the minimal symbol table. All common symbols are "unsatisfied" |
| 76 | when -E is passed to the linker. |
| 77 | |
| 78 | Thu Jul 20 15:04:57 1995 Fred Fish <fnf@cygnus.com> |
| 79 | |
| 80 | * top.c (show_endian): Cast first arg of printf_unfiltered to |
| 81 | correct type of "char *". |
| 82 | |
| 83 | Thu Jul 20 14:18:51 1995 Jeffrey A. Law <law@rtl.cygnus.com> |
| 84 | |
| 85 | * lynx-nat.c (child_wait): A thread_id of zero from wait apparently |
| 86 | means the process is single threaded, so there's no need to add |
| 87 | it to the thread list. Handle case where multi-threaded process |
| 88 | reverts back to a single-threaded process. |
| 89 | |
| 90 | * gdbserver/low-hppabsd.c: Remove error declaration. |
| 91 | * gdbserver/low-sparc.c: Likewise. |
| 92 | * gdbserver/low-sun3.c: Likewise. |
| 93 | * gdbserver/server.h: Remove error and fatal declaration. |
| 94 | * gdbserver/utils.c (error): Update to be compatable with recent |
| 95 | changes in defs.h. |
| 96 | (fatal): Likewise. |
| 97 | |
| 98 | Wed Jul 19 22:42:43 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 99 | |
| 100 | * config/m68k/tm-m68kv4.h (DWARF_REG_TO_REGNUM): Define to |
| 101 | correctly map floating point registers numbers. |
| 102 | |
| 103 | * dwarfread.c (locval, new_symbol): Handle variables that are |
| 104 | optimized out. |
| 105 | |
| 106 | * mdebugread.c: Replace all uses of builtin_type_* with |
| 107 | mdebug_type_*. Define and initialize mdebug_type_*. |
| 108 | |
| 109 | * serial.h (serial_close): Add additional argument `really_close'. |
| 110 | (SERIAL_CLOSE): Update serial_close call accordingly. |
| 111 | (SERIAL_UN_FDOPEN): Use serial_close to handle refcnt properly. |
| 112 | * serial.c (serial_close): Handle `really_close'. |
| 113 | * serial.h (scb_base): Moved to serial.c, made static. |
| 114 | |
| 115 | * valops.c (value_addr): Don't coerce arrays. |
| 116 | (typecmp): Coerce arrays instead of calling value_addr if necessary. |
| 117 | |
| 118 | Wed Jul 19 18:19:28 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 119 | |
| 120 | From Richard Earnshaw (rearnsha@armltd.co.uk): |
| 121 | * infrun.c (wait_for_inferior): Set the convenience variable |
| 122 | $_exitcode to the termination code of the inferior. |
| 123 | * top.c (quit_command): Accept optional expression to use |
| 124 | as parameter to exit(). |
| 125 | |
| 126 | Wed Jul 19 13:15:32 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 127 | |
| 128 | * remote.c (remote_wait): When getting registers, check endianess and |
| 129 | do conversion if necessary. |
| 130 | |
| 131 | Tue Jul 18 00:41:31 1995 Jeff Law (law@snake.cs.utah.edu) |
| 132 | |
| 133 | * gdbserver/low-hppabsd.c: New file. |
| 134 | * gdbserver/Makefile.in (SFILES): Add low-hppabsd.c. |
| 135 | * config/pa/hppabsd.mh (XDEPFILES): Add ser-tcp.o. |
| 136 | (GDBSERVER_DEPFILES): Add low-hppabsd.o. |
| 137 | * config/pa/hppaosf.mh: Likewise. |
| 138 | |
| 139 | Mon Jul 17 21:35:18 1995 Fred Fish <fnf@cygnus.com> |
| 140 | |
| 141 | * dache.c (struct dcache_block): Change data member from unsigned |
| 142 | char to char, since everything passed in and out of dcache is char |
| 143 | or casted to appropriate type anyway. |
| 144 | (dcache_alloc): Move assignment of db out of test and combine |
| 145 | separate tests into if-else. |
| 146 | (dcache_peek_byte): Change ptr from unsigned char* to char*. |
| 147 | (dcache_peek_byte): Remove now unnecessary cast in read_memory call. |
| 148 | (dcache_peek): Change cast of incoming data arg. |
| 149 | (dcache_poke): Change cast of addr of incoming data arg. |
| 150 | (dcache_info): Mask data passed to printf_filtered to lsbyte only. |
| 151 | (dcache_info): Change printf_filtered arg from "% 2x" to " %2x". |
| 152 | * target.c (debug_to_thread_alive): Change return type to int and |
| 153 | return zero, for type compatibility with other *_thread_alive |
| 154 | funcs. |
| 155 | (cleanup_target): Change cast of ignore function to match type of the |
| 156 | to_thread_alive member. |
| 157 | * defs.h (error_hook): Add ATTR_NORETURN. |
| 158 | * defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to |
| 159 | __attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug. |
| 160 | * remote.c (remote_wait): Cast first arg to strtol, strchr, and |
| 161 | strncmp to "const char *" from "unsigned char *". |
| 162 | (remote_wait): Cast arg to putpkt and strcpy from "unsigned char *" |
| 163 | to "char *". |
| 164 | (remote_wait): Change printf format for long arg from "%d" to "%ld". |
| 165 | (getpkt): Remove unused variable "bp". |
| 166 | (remote_fetch_word, remote_store_word): Ifdef out apparently unused |
| 167 | functions. |
| 168 | * breakpoint.c (watchpoint_check): Removed unused variables |
| 169 | "saved_level" and "saved_frame". |
| 170 | * valops.c (value_arg_coerce): Add other enum TYPE_CODE_* and |
| 171 | default cases to switch for completeness. |
| 172 | * infrun.c (wait_for_inferior): Enclose "have_waited" label |
| 173 | in #ifdef that matches the one in which it is referenced. |
| 174 | * ser-unix.c (hardwire_noflush_set_tty_state): Enclose otherwise |
| 175 | unused variable "state" in #ifdef that matches one in which it is |
| 176 | referenced. |
| 177 | * eval.c (evaluate_subexp_standard): Remove unused variable "var". |
| 178 | * eval.c (evaluate_subexp_standard): Remove unused variable |
| 179 | "tmp_symbol". |
| 180 | * valarith.c (value_subscript): Remove unused variable |
| 181 | "lowerbound", which is redeclared in a nested scope prior to use. |
| 182 | * printcmd.c (print_frame_nameless_args): Use "%ld" to print long |
| 183 | arg, not "%d". |
| 184 | * {mem-break.c, remote-pa.c, remote.c, saber.suppress}: |
| 185 | Remove unused static var "check_break_insn_size". |
| 186 | * buildsym.c (finish_block): Add other enum LOC_* and default |
| 187 | cases to switch for completeness. |
| 188 | ch-lang.c (type_lower_upper): Removed unused label "retry". |
| 189 | Add other enum TYPE_* and default cases to switch for completeness. |
| 190 | * f-typeprint.c (f_type_print_args): Ifdef out unused function |
| 191 | that may be used someday when Fortran support is complete. |
| 192 | * ch-valprint.c (chill_print_type_scalar): Add other enum |
| 193 | TYPE_* and default cases to switch for completeness. |
| 194 | (chill_val_print): Remove unused local var "high_bound" that |
| 195 | is redeclared in a nested scope prior to use. |
| 196 | (chill_var_print): Use "%ld" to print long arg, not "%d". |
| 197 | * regex.c (re_compile_fastmap, re_match_2): Add remaining enum |
| 198 | types and default to switches for completeness. |
| 199 | * minsyms.c (lookup_minimal_symbol_text): Delete unused variable |
| 200 | "trampoline_symbol". |
| 201 | (prim_record_minimal_symbol_and_info): Return NULL rather than |
| 202 | trash. |
| 203 | * elfread.c (elf_symtab_read): Don't dereference NULL returns from |
| 204 | record_minimal_symbol_and_info. |
| 205 | * f-lang.c (saved_function_list_end): Ifdef out unused variable |
| 206 | that may be used someday. |
| 207 | * f-valprint.c (f_val_print): Remove unused local "straddr". |
| 208 | |
| 209 | Mon Jul 17 13:08:00 1995 Ian Lance Taylor <ian@cygnus.com> |
| 210 | |
| 211 | * stabsread.h (struct stab_section_list): Define. |
| 212 | (coffstab_build_psymtabs): Remove staboff and stabsize parameters. |
| 213 | Add textaddr, textsize, and stabs parameters. |
| 214 | * gdb-stabs.h (struct dbx_symfile_info): Remove text_sect field. |
| 215 | Add text_addr and text_size fields. |
| 216 | (DBX_TEXT_SECT): Don't define. |
| 217 | (DBX_TEXT_ADDR, DBX_TEXT_SIZE): Define. |
| 218 | * coffread.c: Include <ctype.h>. |
| 219 | (struct coff_symfile_info): Remove stabsect and stabindexsect |
| 220 | fields. Add textaddr, textsize, and stabsects fields. |
| 221 | (coff_locate_sections): Record the address of the .text section, |
| 222 | and total the sizes of all sections with names beginning with |
| 223 | ".text". Don't bother to record a .stab.index section (COFF |
| 224 | doesn't use them). Make a linked list of all sections with names |
| 225 | beginning with ".stab". |
| 226 | (coff_symfile_read): Adjust call to coffstab_build_psymtabs for |
| 227 | new parameters. |
| 228 | * dbxread.c (dbx_symfile_read): Use DBX_TEXT_ADDR and |
| 229 | DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT. |
| 230 | (dbx_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not |
| 231 | DBX_TEXT_SECT. |
| 232 | (elfstab_build_psymtabs): Likewise. |
| 233 | (stabsect_build_psymtabs): Likewise. |
| 234 | (symbuf_sections, symbuf_left, symbuf_read): New static variables. |
| 235 | (fill_symbuf): If symbuf_sections is not NULL, read symbols from |
| 236 | multiple sections. |
| 237 | (coffstab_build_psymtabs): Remove staboffset and stabsize |
| 238 | parameters. Add textaddr, textsize, and stabsects parameters. |
| 239 | Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not DBX_TEXT_SECT. Handle |
| 240 | multiple stabs sections. |
| 241 | * os9kread.c (os9k_symfile_read): Use DBX_TEXT_ADDR and |
| 242 | DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT. |
| 243 | (os9k_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not |
| 244 | DBX_TEXT_SECT. |
| 245 | |
| 246 | * remote-vx.c (vx_ops, vx_run_ops): Initialize new to_thread_alive |
| 247 | field. |
| 248 | |
| 249 | Sat Jul 15 01:02:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 250 | |
| 251 | * config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: New files |
| 252 | for OSF/1-3.x procfs support. |
| 253 | * configure.in (alpha-dec-osf): Use them when configuring |
| 254 | for OSF/1-3.x. |
| 255 | * configure: Updated. |
| 256 | * target.c: Include <string.h>. |
| 257 | |
| 258 | Fri Jul 14 16:16:56 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| 259 | |
| 260 | * Makefile.in, configure.in: Use one variable, frags, to hold |
| 261 | pathnames of makefile fragments. |
| 262 | * configure: regenerated. |
| 263 | |
| 264 | Fri Jul 14 09:49:47 1995 Jeff Law (law@snake.cs.utah.edu) |
| 265 | |
| 266 | * procfs.c (procfs_ops): Fix typo in last change. |
| 267 | |
| 268 | Thu Jul 13 13:42:38 1995 Jeffrey A. Law <law@rtl.cygnus.com> |
| 269 | |
| 270 | * inftarg.c (child_thread_alive): New function to see if a |
| 271 | particular thread is still running. |
| 272 | (child_ops): Add child_thread_alive entry. |
| 273 | * remote.c (remote_thread_alive): New function to see if a |
| 274 | particular thread is still alive. |
| 275 | (remote_ops): Add remote_thread_alive. |
| 276 | * target.c (dummy_target): Add dummy entry for thread_alive. |
| 277 | (cleanup_target): de_fault thread_alive too. |
| 278 | (update_current_target): INHERIT thread_alive too. |
| 279 | (debug_to_thread_alive): New function. |
| 280 | (setup_target_debug): Add debug_to_thread_alive. |
| 281 | * target.h (struct target_ops): Add to_thread_alive. |
| 282 | (target_thread_alive): Define. |
| 283 | * thread.c (info_threads_command): Don't call kill; use |
| 284 | target_thread_alive instead. |
| 285 | * config/nm-lynx.h (CHILD_THREAD_ALIVE): Define. |
| 286 | * gdbserver/low-lynx.c (mythread_alive): New function. |
| 287 | (mywait): Don't restart any threads after a new thread notification, |
| 288 | let the generic code handle it. |
| 289 | * gdbserver/low-sparc.c (mythread_alive): Dummy version. |
| 290 | * gdbserver/low-sun3.c (mythread_alive): Likewise. |
| 291 | * gdbserver/server.c (main): Handle thread_alive requests. |
| 292 | * gdbserver/server.h (mythread_alive): Declare. |
| 293 | * corelow.c (core_ops): Add dummy entry for thread_alive. |
| 294 | * exec.c (exec_ops): Likewise. |
| 295 | * m3-nat.c (m3_ops): Likewise. |
| 296 | * monitor.c (monitor_ops): Likewise. |
| 297 | * procfs.c (procfs_ops): Likewise. |
| 298 | * remote-arc.c (arc_ops): Likewise. |
| 299 | * remote-array.c (array_ops): Likewise. |
| 300 | * remote-e7000.c (e7000_ops): Likewise. |
| 301 | * remote-es.c (es1800_ops, es1800_child_ops): Likewise. |
| 302 | * remote-mips.c (mips_ops): Likewise. |
| 303 | * remote-pa.c (remote_hppro_ops): Likewise. |
| 304 | * remote-sim.c (gdbsim_ops): Likewise. |
| 305 | * sparcl-tdep.c (sparclite_ops): Likewise. |
| 306 | |
| 307 | Tue Jul 11 11:15:55 1995 Kung Hsu <kung@rtl.cygnus.com> |
| 308 | |
| 309 | * solib.c: Add _DYNAMIC__MGC base symbol for Mentor Graphics Inc. |
| 310 | * solib.c (match_main): New function for checking name of main. |
| 311 | * solib.c (solib_add): Not to add if solib match main. |
| 312 | |
| 313 | Fri Jul 7 14:41:56 1995 Kung Hsu <kung@rtl.cygnus.com> |
| 314 | |
| 315 | * elfread.c (elf_symtab_read): Fix a bug ignoring compiler |
| 316 | generated internal labels ($LM...). |
| 317 | |
| 318 | Wed Jul 5 11:38:36 1995 Kung Hsu <kung@rtl.cygnus.com> |
| 319 | |
| 320 | * defs.h: if __GO32__ or WIN32 the directory separating symbol should |
| 321 | be '\' not '/'. |
| 322 | |
| 323 | * remote-nindy (nindy_wait): Use infinite timeout reading after |
| 324 | esacpe character. |
| 325 | |
| 326 | Tue Jul 4 10:30:22 1995 Jeffrey A. Law <law@rtl.cygnus.com> |
| 327 | |
| 328 | * infrun.c (wait_for_inferior): When switching from one thread to |
| 329 | another, save infrun's state for the old thread and load infrun's |
| 330 | previous state for the new thread. |
| 331 | * thread.c (struct thread_info): Add new fields for thread specific |
| 332 | state saved/restored in infrun.c. |
| 333 | (add_thread): Initialize new fields. |
| 334 | (load_infrun_state): New function. |
| 335 | (save_infrun_state): New function. |
| 336 | * thread.h (load_infrun_state): Provide external decl. |
| 337 | (save_infrun_state): Likewise. |
| 338 | |
| 339 | * infrun.c (wait_for_inferior): When we hit a breakpoint for the |
| 340 | wrong thread, make sure to write the fixed PC value into the thread |
| 341 | that stopped. Restart all threads after single stepping over a |
| 342 | breakpoint for a different thread. |
| 343 | * breakpoint.c (set_momentary_breakpoint): Make momentary |
| 344 | breakpoints thread specific in a multi-threaded program. |
| 345 | * lynx-nat.c (child_resume): Add some comments. Correctly |
| 346 | choose between the single and multi-threaded step and continue |
| 347 | ptrace calls. |
| 348 | |
| 349 | Fri Jun 30 16:15:36 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 350 | |
| 351 | * config/h8300/h8300.mt: Renamed from h8300hms.mt. |
| 352 | * config/h8500/h8500.mt: Renamed from h8500hms.mt. |
| 353 | * config/z8k/z8k.mt: Renamed from z8ksim.mt. |
| 354 | * configure, configure.in: Update to reflect renamings. |
| 355 | |
| 356 | * remote-sim.c (sim): New command, passes commands to simulator. |
| 357 | (simulator_command): New function. |
| 358 | (gdbsim_ops): Clean up. |
| 359 | * remote-sim.h (sim_do_command): Declare. |
| 360 | * sh-tdep.c (memory_size): Remove command. |
| 361 | |
| 362 | * Makefile.in (SIM, SIM_OBS): New variables. |
| 363 | (CLIBS, CDEPS): Add value of SIM. |
| 364 | (DEPFILES): Add value of SIM_OBS |
| 365 | |
| 366 | * config/arm/arm.mt, config/h8300/h8300.mt, config/h8500/h8500.mt, |
| 367 | config/sh/sh.mt, config/sparc/sp64sim.mt, config/w65/w65.mt, |
| 368 | config/z8k/z8k.mt: Remove simulator files from TDEPFILES, |
| 369 | define in SIM_OBS and SIM. |
| 370 | config/sparc/sp64sim.mt (SIMFILES): Remove. |
| 371 | |
| 372 | * remote-z8k.c: Remove, was superseded by remote-sim.c |
| 373 | * Makefile.in, mpw-make.in: Remove references to remote-z8k.c. |
| 374 | |
| 375 | Sun Jun 25 15:30:43 1995 Stan Shebs <shebs@cygnus.com> |
| 376 | |
| 377 | * remote.c (remote_read_bytes, remote_write_bytes): Second arg |
| 378 | should be char *, not unsigned char *. |
| 379 | * dcache.h (memxferfunc): Ditto. |
| 380 | * monitor.c (monitor_write_memory, monitor_read_memory_single): |
| 381 | Ditto. |
| 382 | (monitor_make_srec): Let compiler figure size of hextab. |
| 383 | |
| 384 | Sat Jun 24 19:27:37 1995 Jeffrey A. Law <law@rtl.cygnus.com> |
| 385 | |
| 386 | * lynx-nat.c (child_wait): Don't restart new threads and loop |
| 387 | to the top of child_wait; let the machine independent code in |
| 388 | wait_for_inferior deal with new thread notifications. |
| 389 | |
| 390 | Fri Jun 23 11:51:58 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 391 | |
| 392 | * remote-nindy (nindy_load): Put in target specific load, it's |
| 393 | 20 times faster. |
| 394 | |
| 395 | Thu Jun 22 20:21:59 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 396 | |
| 397 | * utils.c (error): Move local `args' outside conditional, |
| 398 | move local `string1' inside, declare function as void if |
| 399 | non-ANSI compiler, dereference error_hook when calling. |
| 400 | |
| 401 | * mac-xdep.c (stdarg.h): Don't include. |
| 402 | |
| 403 | Thu Jun 22 13:12:33 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 404 | |
| 405 | * remote-nindy.c (nindy_wait): Change timeout in SERIAL_READCHAR. |
| 406 | |
| 407 | Wed Jun 21 13:24:41 1995 Jeff Law (law@snake.cs.utah.edu) |
| 408 | |
| 409 | * hppam3-nat.c: Change HP800_THREAD_STATE to TRACE_FLAVOR and |
| 410 | HP800_THREAD_STATE_COUNT to TRACE_FLAVOR_SIZE. |
| 411 | |
| 412 | Wed Jun 21 05:57:56 1995 Steve Chamberlain <sac@slash.cygnus.com> |
| 413 | |
| 414 | * monitor.c: Turn on caching. |
| 415 | (monitor_printf): If a ^C was sent, don't expect to see its |
| 416 | echo. |
| 417 | (monitor_open): Enable caching. |
| 418 | (monitor_resume, monitor_load): Flush cache. |
| 419 | (monitor_xfer_memory): Call cache routine. |
| 420 | (monitor_dump_regs): New. |
| 421 | (monitor_fetch_registers): If monitor_dump_regs available |
| 422 | then use it. |
| 423 | (monitor_load): Don't ref exec_bfd if it's NULL. |
| 424 | (monitor_load_srec): Use new monitor_make_srec calling convention. |
| 425 | (monitor_make_srec): Rewrite to cope with two, three and four byte |
| 426 | addresses. |
| 427 | * remote-hms.c (hms_cmds): Initialze end-of-command delim. |
| 428 | * dcache.h, dcache.h: Rewritten. |
| 429 | * remote.c: Reenable caching. |
| 430 | (getpkt): Reduce MAX_TRIES to 3. |
| 431 | (remote_xfer_memory): Use dcache_xfer_memory. |
| 432 | * defs.h (error_hook): New. |
| 433 | * top.c (error_hook): New definition. |
| 434 | * utils.c (error): Use error_hook if initialized. |
| 435 | * sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use |
| 436 | HAVE_SOCKETS in place of #ifndef GO32. |
| 437 | |
| 438 | Tue Jun 20 22:17:44 1995 Jeff Law (law@snake.cs.utah.edu) |
| 439 | |
| 440 | * config/pa/tm-hppa.h (PSW_*): Define processor status word masks. |
| 441 | (INSTRUCTION_NULLIFIED): Allow specific targets to override. |
| 442 | * config/pa/tm-hppao.h (INSTRUCTION_NULLIFIED): Define to work |
| 443 | around losing mach kernel behavior. |
| 444 | |
| 445 | Tue Jun 20 12:03:36 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 446 | |
| 447 | * monitor.c (monitor_wait): Don't use the watchdog timeout |
| 448 | if its value is 0. |
| 449 | * w89k-rom.c (w89k_open): Define to be static. |
| 450 | |
| 451 | start-sanitize-gdbtk |
| 452 | Tue Jun 20 10:19:40 1995 Stu Grossman (grossman@cygnus.com) |
| 453 | |
| 454 | * gdbtk.c: Add functions Tcl_Malloc, Tcl_Realloc, and Tcl_Free. |
| 455 | |
| 456 | * gdbtk.tcl (add_breakpoint_frame): Add more fields. |
| 457 | * (create_file_win create_asm_win build_framework): Create null |
| 458 | bindings for meta keys to keep window from dropping down to |
| 459 | insertion point when meta is pressed by itself. New bindings: |
| 460 | Up/Down - Scroll up/down one line at a time |
| 461 | Next/Prior - Scroll up/down one page at a time |
| 462 | Home/End - Warp to current pc/end of file |
| 463 | * (build_framework): Turn on breakpoint menu. |
| 464 | * (create_command_window): Implement tab completion. Add binding |
| 465 | for ^C to stop target. |
| 466 | end-sanitize-gdbtk |
| 467 | |
| 468 | Sat Jun 17 10:17:16 1995 Jeff Law (law@snake.cs.utah.edu) |
| 469 | |
| 470 | * somsolib.c (som_solib_add): Validate regexp argument. |
| 471 | Don't assume the first entry on dld's library list is the main |
| 472 | program. Don't load the same library more than once and don't |
| 473 | consider the main program a shared library. |
| 474 | (som_solib_sharedlibrary_command): New function |
| 475 | (_initialize_som_solib): Add "sharedlibrary" command. |
| 476 | |
| 477 | Thu Jun 15 14:54:58 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 478 | |
| 479 | * array-rom.c: Remove, no longer used. |
| 480 | |
| 481 | * remote-hms.c (hms_open): Make static. |
| 482 | |
| 483 | * mpw-config.in (MacSerial.h): Copy from version in {CIncludes}, |
| 484 | not {MPW}Interfaces:CIncludes. |
| 485 | * ser-mac.c (mac_baud_rate_table): Fix value for 38400 baud. |
| 486 | |
| 487 | Wed Jun 14 14:27:07 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 488 | |
| 489 | * ch-exp.y: Remove lots of unsupported productions and names. |
| 490 | Add support for IF-expressions, ORIF, ANDIF, NUM, and ADDR. |
| 491 | |
| 492 | Tue Jun 13 21:40:11 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 493 | |
| 494 | * parser-defs.h (enum precedence): Added PREC_BUILTIN_FUNCTION. |
| 495 | * expression.h (enum exp_opcode): Added UNOP_LOWER, UNOP_UPPER, |
| 496 | UNUP_LENGTH. |
| 497 | * expprint.c (dump_expression): Handle the new exp_opcodes. |
| 498 | (print_subexp): Handle PREC_BUILTIN_FUNCTION. |
| 499 | (print_simple_m2_func): Removed. |
| 500 | (print_subexp): Remove support for Modula2 builtin functions. |
| 501 | * m2-lang.c (m2_op_print_tab): Add support for builtin functions. |
| 502 | * ch-exp.y: Parse LOWER, UPPER, and LENGTH builtins. |
| 503 | (write_lower_upper_value): Convenience function for LOWER and UPPER. |
| 504 | (upper_lower_argument, length_argument): Removed non-terminals. |
| 505 | * ch-lang.c (chill_op_print_tab): Entries for UPPER, LOWER, LENGTH. |
| 506 | (type_lower_upper): New function. Calculate LOWER/UPPER of type. |
| 507 | (value_chill_length): New function. Calcalate LENGTH of ARRAY/STRING. |
| 508 | (evaluate_subexp_chill): Handle UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH. |
| 509 | |
| 510 | Mon Jun 12 12:48:13 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 511 | |
| 512 | Windows support bits from Steve Chamberlain <sac@slash.cygnus.com>. |
| 513 | * defs.h: Don't declare strchr and friends if WIN32. |
| 514 | (DIRNAME_SEPARATOR): Move here from source.c. |
| 515 | (SLASH_P, SLASH_CHAR, SLASH_STRING, ROOTED_P): New macros, |
| 516 | symbolic definitions for filename bits. |
| 517 | * top.c (cd_command): Use these. |
| 518 | * source.c (mod_path, openp): Ditto. |
| 519 | * terminal.h: Disable termio/sgtty definitions if WIN32. |
| 520 | * findvar.c (registers_changed): Call registers_changed_hook |
| 521 | if it is defined. |
| 522 | |
| 523 | Mon Jun 12 12:22:05 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| 524 | |
| 525 | * Makefile.in (distclean, realclean): Remove config.cache and |
| 526 | config.log. |
| 527 | |
| 528 | Mon Jun 12 00:21:59 1995 Jeff Law (law@snake.cs.utah.edu) |
| 529 | |
| 530 | * somsolib.c: Include gdb-stabs.h. |
| 531 | (som_solib_section_offsets): Use SECT_OFF_XXX rather than 0, 1, |
| 532 | etc. Initialize offsets for RODATA & BSS too. |
| 533 | |
| 534 | Sat Jun 10 17:59:11 1995 Jeff Law (law@snake.cs.utah.edu) |
| 535 | |
| 536 | * hppa-tdep.c (frame_chain): Try to compensate for incomplete |
| 537 | register information in core files when backtracing. |
| 538 | |
| 539 | Fri Jun 9 14:51:38 1995 Stu Grossman (grossman@cygnus.com) |
| 540 | |
| 541 | * remote-nrom.c: Remove everything but download code. More |
| 542 | cleanups. |
| 543 | |
| 544 | Thu Jun 8 15:06:00 1995 Stu Grossman (grossman@cygnus.com) |
| 545 | |
| 546 | * defs.h maint.c monitor.c remote-mips.c remote.c: Add support |
| 547 | for `watchdog' variable. This allows the user to put an upper |
| 548 | limit on the amount of time that GDB will wait for the target to |
| 549 | return from a step or continue operation. This will primarily be |
| 550 | used for the testsuite, where it is difficult to come up with a |
| 551 | reasonable timeout for things like function calls, which can take |
| 552 | as long as three minutes under some circumstances. If the |
| 553 | watchdog timer expires, GDB will generate an error that looks like |
| 554 | `Watchdog has expired.', and will detach from the target. |
| 555 | |
| 556 | * remote-mips.c (mips_open): Setup initial frame from target. |
| 557 | Print it out so that user is told where the program is stopped |
| 558 | when they attach. |
| 559 | |
| 560 | * remote-nrom.c: Loads of cleanups. Use serial code to open |
| 561 | network connections. Use expect() to wait for response to |
| 562 | download command. |
| 563 | |
| 564 | * ser-tcp.c (tcp_open): Retry connection if we get ECONNREFUSED. |
| 565 | |
| 566 | * serial.c serial.h (serial_open serial_fdopen serial_close): |
| 567 | Allow users to open the same device multiple times. They all get |
| 568 | to share the same serial_t. This is about the only way to have |
| 569 | multiple active targets use the same device (for download and |
| 570 | debug). |
| 571 | |
| 572 | * sparcl-tdep.c: Keep #include <unistd.h> away from GO32. |
| 573 | |
| 574 | * target.c: Add `targetdebug' variable. If this is non-zero, |
| 575 | then a special target is put at the top of the target stack which |
| 576 | will cause all calls through the target vector to have their args |
| 577 | and results printed out. |
| 578 | |
| 579 | Wed Jun 7 17:40:37 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 580 | |
| 581 | * ch-exp.y: Handle <primitive_value> "->" <modename>. |
| 582 | |
| 583 | Wed Jun 7 17:46:33 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| 584 | |
| 585 | * mem-break.c (LITTLE_BREAKPOINT): If BREAKPOINT and |
| 586 | {LITTLE,BIG}_BREAKPOINT are all defined, don't redefine. |
| 587 | (BIG_BREAKPOINT): Ditto. |
| 588 | |
| 589 | * config/rs6000/tm-rs6000.h (BREAKPOINT): Define as either |
| 590 | BIG_BREAKPOINT or LITTLE_BREAKPOINT depending on the target byte |
| 591 | order. |
| 592 | |
| 593 | Wed Jun 7 12:41:42 1995 Jeff Law (law@snake.cs.utah.edu) |
| 594 | |
| 595 | * somsolib.c (som_solib_section_offsets): Handle relative pathnames. |
| 596 | |
| 597 | * hppa-tdep.c (frame_saved_pc): Handle backtracing through signal |
| 598 | handler in dynamically linked executables. |
| 599 | |
| 600 | Tue Jun 6 10:44:25 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| 601 | |
| 602 | From Andrew Cagney <cagney@highland.com.au> |
| 603 | * rs6000-tdep.c (single_step): Handle both little and big endian |
| 604 | breakpoints. |
| 605 | (gdb_print_insn_powerpc): Deal with disassembling both little and |
| 606 | big endian PowerPC systems. |
| 607 | (_initialize_rs6000_tdep): Use gdb_print_insn_powerpc to handle |
| 608 | disassembly, rather that assuming big endian order. |
| 609 | |
| 610 | * config/rs6000/tm-rs6000.h (BREAKPOINT): Delete. |
| 611 | (BIG_BREAKPOINT): Define, big endian breakpoint instruction. |
| 612 | (LITTLE_BREAKPOINT): Define, little endian breakpoint instruction. |
| 613 | |
| 614 | Sat Jun 3 01:54:56 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 615 | |
| 616 | * README: Add note about Unixware 2.x. |
| 617 | |
| 618 | * dbxread.c (process_one_symbol): Check for exact symbol name |
| 619 | match when fixing up N_GSYM and N_STSYM symbols from Sun acc. |
| 620 | |
| 621 | * valprint.c (value_print_array_elements): Use |
| 622 | fprintf_filtered to put out `<repeats %u times>', |
| 623 | from schwab@issan.informatik.uni-dortmund.de (Andreas Schwab). |
| 624 | |
| 625 | * value.h (struct value): Change `repetitions' field from |
| 626 | `short' to `int' type. |
| 627 | |
| 628 | start-sanitize-arc |
| 629 | Fri Jun 2 11:17:23 1995 Doug Evans <dje@canuck.cygnus.com> |
| 630 | |
| 631 | * arc-tdep.c (arc_bfd_mach_type): New static global. |
| 632 | (codestream_fill): Handle byte order differences. |
| 633 | (setup_prologue_scan): Don't read stdarg function's "sub sp,sp,N". |
| 634 | (arc_get_frame_setup): Read it here. |
| 635 | (arc_frame_saved_pc): And here. |
| 636 | (arc_print_insn): New function. |
| 637 | (arc_set_cpu_type): Set arc_bfd_mach_type. Don't set tm_print_insn. |
| 638 | (_initialize_arc_tdep): Set tm_print_insn to arc_print_insn. |
| 639 | end-sanitize-arc |
| 640 | |
| 641 | Wed May 31 12:04:01 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| 642 | |
| 643 | * nlm/{configure.in, Makefile.in}: Converted to use autoconf. |
| 644 | * nlm/configure: New file, generated with autoconf 2.3. |
| 645 | |
| 646 | * nlm/configure.in: Use sed instead of awk to get the value of |
| 647 | cpufile. Awk is not a utility required by the GNU coding |
| 648 | standards. This change also fixes the rigid whitespace |
| 649 | requirements that were required for awk. |
| 650 | |
| 651 | * sparclite/aload.c: Use a file descriptor instead of a stdio |
| 652 | stream for i/o with target board. |
| 653 | Use #error if HAVE_TERMIOS is not defined. |
| 654 | |
| 655 | * sparclite/{Makefile.in, configure.in}: Converted to use |
| 656 | autoconf. |
| 657 | * sparclite/configure: New file, generated with autoconf 2.3. |
| 658 | |
| 659 | Sun May 28 23:10:07 1995 Jeff Law (law@snake.cs.utah.edu) |
| 660 | |
| 661 | * defs.h: Include either varargs.h or stdarg.h (for va_list). |
| 662 | Fix stupid thinko in last change ("..." -> "va_list"). |
| 663 | |
| 664 | * defs.h (vprintf_filtered declaration): Add PARAMS prototype; |
| 665 | gcc-2.5 chokes on format attributes for unprototyped functions. |
| 666 | (vfprintf_filtered declaration): Likewise. |
| 667 | (vprintf_unfiltered declaration): Likewise. |
| 668 | (vfprintf_unfiltered). Likewise. |
| 669 | |
| 670 | Sat May 27 23:54:17 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| 671 | |
| 672 | * configure.in: Use sed instead of awk to get the values of |
| 673 | hostfile, targetfile and nativefile. Awk is not a utility |
| 674 | required by the GNU coding standards. This change also |
| 675 | fixes the rigid whitespace requirements that were required |
| 676 | for awk. |
| 677 | * configure: regenerated. |
| 678 | |
| 679 | Sat May 27 16:24:04 1995 Angela Marie Thomas <angela@cirdan.cygnus.com> |
| 680 | |
| 681 | * sparclite/{Makefile,configure}.in: Add hooks for building with |
| 682 | -lsocket & -lnsl for solaris2. Don't build aload/eload for DOS. |
| 683 | |
| 684 | Thu May 25 12:46:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 685 | |
| 686 | * gdbserver/remote-utils.c (prepare_resume_reply): Add FIXME |
| 687 | comment regarding signal numbering. |
| 688 | |
| 689 | Wed May 24 15:49:47 1995 Steve Chamberlain <sac@slash.cygnus.com> |
| 690 | |
| 691 | * arm-tdep.c (_initialize_arm_tdep): Use print_insn_little_arm |
| 692 | now. |
| 693 | |
| 694 | * arm-tdep.c (convert_from_extended, convert_to_extended): |
| 695 | New. |
| 696 | * coffread.c (enter_linenos): Return if linetab 0. |
| 697 | * config/arm/arm.mt (TDEPFILES): Add simulator support. |
| 698 | * config/arm/tm-arm.h (FRAME_FIND_SAVED_REGS): Fix prototypes. |
| 699 | |
| 700 | Mon May 22 19:37:21 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| 701 | |
| 702 | * config/idt.mt: replace monitor and array-rom with the new |
| 703 | remote-array. |
| 704 | |
| 705 | Mon May 22 15:38:25 1995 Stu Grossman (grossman@cygnus.com) |
| 706 | |
| 707 | * remote-nindy.c: Install Kung patch for PR 6820. I have no idea |
| 708 | what this does... |
| 709 | |
| 710 | * breakpoint.c: Move defaults of watchpoint related macros into |
| 711 | target.h. |
| 712 | * target.h: Macros from breakpoint.c. Conditionalize based on |
| 713 | TARGET_HAS_HARDWARE_WATCHPOINTS. |
| 714 | * i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS |
| 715 | instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint |
| 716 | code. |
| 717 | * config/i386/nm-linux.h, config/mips/nm-irix4.h, |
| 718 | config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define |
| 719 | TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code. |
| 720 | |
| 721 | Mon May 22 06:47:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 722 | |
| 723 | * breakpoint.c, target.h: Move defaults of watchpoint related |
| 724 | macros back to breakpoint.c. Required to get GDB compiling |
| 725 | on Solaris again. |
| 726 | |
| 727 | Fri May 19 14:49:37 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| 728 | |
| 729 | * defs.h (ATTR_FORMAT): New macro, expands to gcc's format |
| 730 | attribute when compiled by gcc. |
| 731 | * defs.h, language.h, monitor.h: Changed many function |
| 732 | declarations to use ATTR_FORMAT. |
| 733 | |
| 734 | * breakpoint.c (delete_command); source.c (directory_command); |
| 735 | top.c (define_command): Changed call to query() that had too |
| 736 | many arguments. |
| 737 | * printcmd.c (address_info): Changed call to printf_filtered() |
| 738 | that had too many arguments. |
| 739 | |
| 740 | Fri May 19 09:52:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 741 | |
| 742 | * infrun.c (wait_for_inferior): Move assignments to stop_signal |
| 743 | and stop_pc, and STOPPED_BY_WATCHPOINT code, back where they |
| 744 | were--after the switch statement on w.kind. You can't read the |
| 745 | registers of an inferior which has exited. Use a goto in the |
| 746 | STOPPED_BY_WATCHPOINT code. |
| 747 | * infrun.c (wait_for_inferior): Reinstate |
| 748 | HAVE_STEPPABLE_WATCHPOINT and HAVE_CONTINUABLE_WATCHPOINT code. |
| 749 | |
| 750 | Fri May 19 06:15:40 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 751 | |
| 752 | * utils.c, complaints.c, language.c, monitor.c, remote-array.c, |
| 753 | remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of |
| 754 | stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it |
| 755 | must match the definition of PARAMS. |
| 756 | start-sanitize-gdbtk |
| 757 | * gdbtk.c: Likewise. |
| 758 | end-sanitize-gdbtk |
| 759 | |
| 760 | Thu May 18 15:58:46 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| 761 | |
| 762 | * utils.c (fprintf_filtered, fprintf_unfiltered, fprintfi_filtered, |
| 763 | printf_filtered, printf_unfiltered, printfi_filtered, query, warning, |
| 764 | error, fatal, fatal_dump_core): Use stdarg.h macros when compiling |
| 765 | with an ANSI compiler. |
| 766 | * complaints.c (complain): Likewise. |
| 767 | * language.c (type_error, range_error): Likewise. |
| 768 | * monitor.c (monitor_printf, monitor_printf_noecho): Likewise. |
| 769 | * remote-array.c (printf_monitor, debuglogs): Likewise. |
| 770 | * remote-mips.c (mips_error): Likewise. |
| 771 | * remote-os9k.c (printf_monitor): Likewise. |
| 772 | * remote-st.c (printf_stdebug): Likewise. |
| 773 | start-sanitize-gdbtk |
| 774 | * gdbtk.c (gdbtk_query): Likewise. |
| 775 | end-sanitize-gdbtk |
| 776 | |
| 777 | * defs.h, complaints.h, language.h, monitor.h: Add prototypes to |
| 778 | match above changes. |
| 779 | |
| 780 | * printcmd.c: Remove uneeded #include <varargs.h>. |
| 781 | * remote-e7000.c: Likewise. |
| 782 | |
| 783 | * f-typeprint.c (f_type_print_base): Fix typo found by above |
| 784 | changes. |
| 785 | |
| 786 | Wed May 17 11:21:32 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 787 | |
| 788 | * Makefile.in (xcoffread.o): Depend on partial-stab.h. |
| 789 | |
| 790 | * xcoffsolib.c (sharedlibrary_command): New command. |
| 791 | * xcoffsolib.c (solib_info): Call xcoff_relocate_symtab. |
| 792 | * xcoffsolib.c: Miscellaneous cleanups. |
| 793 | |
| 794 | * partial-stab.h: Ignore symbol descriptor '-' (for local |
| 795 | variables with negative type numbers) without complaint. |
| 796 | |
| 797 | * rs6000-nat.c (vmap_ldinfo): Use bfd_stat rather than our own |
| 798 | local emulation thereof. Remove unused variable ostart. |
| 799 | |
| 800 | Wed May 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| 801 | |
| 802 | * Makefile.in (config.status): changed target so that |
| 803 | config.status --recheck is executed if configure script changes. |
| 804 | |
| 805 | * monitor.c (monitor_printf): Changed format specification in |
| 806 | error message to work with pre-ansi compilers. |
| 807 | (monitor_load_srec): reduced length of s-records from 128 to 32 |
| 808 | bytes so download is more reliable with the rom68k monitor. |
| 809 | |
| 810 | * rom68k-rom.c: Added trailing space to prompt string. |
| 811 | |
| 812 | * config/i386/xm-i386sco.h (HAVE_STRSTR): Removed. |
| 813 | * config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING): |
| 814 | Removed. |
| 815 | * defs.h, config/{xm-lynx.h, xm-nbsd.h}, |
| 816 | config/i386/{xm-i386bsd.h, xm-linux.h}, |
| 817 | config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h, |
| 818 | config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo |
| 819 | (PSIGNAL_IN_SIGNAL_H): Removed. |
| 820 | |
| 821 | Tue May 16 13:16:06 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| 822 | |
| 823 | * Makefile.in (Makefile): Added config.status to dependency list. |
| 824 | |
| 825 | * configure.in: Added INIT-CMDS argument to AC_OUTPUT which sets |
| 826 | gdb_host_cpu, gdb_target_cpu and nativefile. |
| 827 | * configure: regenerated. |
| 828 | |
| 829 | Mon May 15 23:50:51 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 830 | |
| 831 | * mdebugread.c (parse_symbol): Do not relocate stBlock/scText |
| 832 | symbols, their value is the displacement from the procedure address. |
| 833 | * top.c (init_main): Add missing newlines to help strings for |
| 834 | `if' and `while' commands, fix help string for `show commands'. |
| 835 | |
| 836 | Mon May 15 18:37:56 1995 Stu Grossman (grossman@cygnus.com) |
| 837 | |
| 838 | * breakpoint.c: Move defaults of watchpoint related macros into |
| 839 | target.h. Use BP_TEMPFLAG and BP_HARDWAREFLAG instead of |
| 840 | constants. |
| 841 | * infrun.c (wait_for_inferior): Enhance comment near |
| 842 | STOPPED_BY_WATCHPOINT. |
| 843 | * target.h: Macros from breakpoint.c. |
| 844 | |
| 845 | Mon May 15 17:11:38 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| 846 | |
| 847 | * config/i386/{i386sol2.mh, i386v4.mh, ncr3000.mh}, |
| 848 | config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh, |
| 849 | mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured |
| 850 | out by autoconf. |
| 851 | * config/apollo68v.mh (RANLIB): Removed, figured out by autoconf. |
| 852 | |
| 853 | * Makefile.in, configure.in: Converted to use autoconf |
| 854 | * aclocal.m4: New file, local autoconf macro definitions. |
| 855 | * configure: New file, generated with autoconf 2.3. |
| 856 | |
| 857 | Mon May 15 14:46:41 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 858 | |
| 859 | * remote.c (remote_kill): Add prototype. |
| 860 | * cpu32bug-rom.c (cpu32bug_open): Properly define as static. |
| 861 | * config/h8300/h8300hms.mt (TDEPFILES): Add monitor.o. |
| 862 | |
| 863 | Mon May 15 12:12:34 1995 Stu Grossman (grossman@cygnus.com) |
| 864 | |
| 865 | * sparclite/salib.c (win_ovf win_unf): Make window size constant |
| 866 | into a variable (__WINSIZE) so that it can be controlled via the |
| 867 | .h file. |
| 868 | * sparclite/sparclite.h: Add SL933 #ifdef to set __WINSIZE to 6 |
| 869 | for the 933 board. |
| 870 | |
| 871 | * infrun.c: Add #ifdef HP_OS_BUG to all references to |
| 872 | trap_expected_after_continue. |
| 873 | * (wait_for_inferior): Fix for remote watchpoints. Don't try to |
| 874 | insert breakpoints while target is running (this only works on |
| 875 | *some* native targets). This may also speed up native watchpoints |
| 876 | considerably. |
| 877 | |
| 878 | Sat May 13 13:55:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 879 | |
| 880 | * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc), |
| 881 | mdebugread.c (struct symloc), hpread.c (struct symloc), |
| 882 | xcoffread.c (struct symloc): Fix inaccurate comment introduced |
| 883 | 20 Apr 1995. |
| 884 | |
| 885 | Sat May 13 13:34:18 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 886 | |
| 887 | * rs6000-tdep.c (find_toc_address): Revise comment. |
| 888 | * symfile.c, symfile.h (init_psymbol_list): New function; |
| 889 | consolidate duplicated copies from os9kread.c, dbxread.c |
| 890 | and dwarfread.c. |
| 891 | * defs.h: Declare info_verbose. |
| 892 | * xcoffread.c: Extensive changes to support psymtabs. |
| 893 | |
| 894 | Fri May 12 13:48:41 1995 Stu Grossman (grossman@andros.cygnus.com) |
| 895 | |
| 896 | * cpu32bug-rom.c remote-est.c rom68k-rom.c: Update line_term element. |
| 897 | |
| 898 | Fri May 12 06:39:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 899 | |
| 900 | * partial-stab.h: Expand comments. |
| 901 | |
| 902 | Thu May 11 19:01:37 1995 Jeff Law (law@snake.cs.utah.edu) |
| 903 | |
| 904 | * Support debugging using native MACH primitives on hppa*-*-osf*. |
| 905 | * configure.in: hppa*-*-osf* != hppa*-*-bsd* anymore. |
| 906 | * config/pa/hppaosf.mh: New file. |
| 907 | * config/pa/nm-hppao.h: Likewise. |
| 908 | * hppam3-nat.c: Likewise. |
| 909 | * config/pa/tm-hppao.h (PSW_SS): Define for single-stepping. |
| 910 | (MACHINE_CPROC_*_OFFSET): Define. |
| 911 | (TRACE_*): Define. |
| 912 | (START_INFERIOR_TRAPS_EXPECTED): Delete definition. |
| 913 | |
| 914 | Wed May 10 18:59:26 1995 Stu Grossman (grossman@andros.cygnus.com) |
| 915 | |
| 916 | * hppa-tdep.c (read_unwind_info): Cosmetic cleanup. |
| 917 | * (unwind_command): Clean it up and make it print things out |
| 918 | nicer. |
| 919 | * monitor.c: Add ^C handling capability (mostly ripped off from |
| 920 | remote.c). |
| 921 | * (monitor_printf): Make it check the command echo. |
| 922 | * (monitor_printf_noecho): Similar to above, but doesn't check |
| 923 | for echo. |
| 924 | * (monitor_stop): No longer waits for prompt. That is the job of |
| 925 | the caller. This makes things work much better for monitor_wait, |
| 926 | which waits for the prompt itself. |
| 927 | * (monitor_open): Deal with new monitor_stop semantics. Also, |
| 928 | flush input after sending init strings to get rid of junk that may |
| 929 | be output. Also, don't always send \r to remote. Use |
| 930 | monitor_ops->line_term cuz proper character isn't always \r. |
| 931 | * (monitor_fetch_register): Switch to completely different |
| 932 | algorithm to deal with lame-ass monitors which put spaces in the |
| 933 | middle of numbers, and prompt with a space!!!!! |
| 934 | * (monitor_read_memory_single): New routine to be used with |
| 935 | monitors that can only return one byte/short/long at a time. This |
| 936 | is selected via MO_GETMEM_READ_SINGLE. |
| 937 | * (monitor_load_srec): Use monitor_printf_noecho for sending S |
| 938 | records. Most targets don't echo them. |
| 939 | * (monitor.h): Get rid of cmd_delim. Add line_delim. |
| 940 | * op50n-rom.c (op50n_cmds): Fill it up. Make it work. |
| 941 | * w89k-rom.c: Change all eols from \r to \n. Change load_resp to |
| 942 | ^Q to prevent error message. |
| 943 | * config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special |
| 944 | instruction sequence at end to make restore_pc_queue happy. |
| 945 | |
| 946 | Wed May 10 15:59:00 1995 Torbjorn Granlund <tege@adder.cygnus.com> |
| 947 | |
| 948 | * remote-est.c (est_open): Make static to match prototype. |
| 949 | |
| 950 | Tue May 9 16:58:50 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| 951 | |
| 952 | * configure.in: Add little endian PowerPC support. |
| 953 | * config/powerpc/ppcle-eabi.mt: New file for little endian PowerPC |
| 954 | support. |
| 955 | * config/powerpc/tm-ppcle-eabi.h: ditto. |
| 956 | |
| 957 | Mon May 8 12:11:38 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| 958 | |
| 959 | * nlm/configure.in (gdb_host, gdb_host_cpu, gdb_target): Removed. |
| 960 | These variables not used. |
| 961 | |
| 962 | * config/m68k/monitor.mt (TDEPFILES): Added cpu32bug-rom.o. |
| 963 | |
| 964 | Wed May 3 17:54:47 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 965 | |
| 966 | * monitor.c (monitor_command): Don't use PROMPT until monitor |
| 967 | target is known to be open. |
| 968 | (monitor_make_srec): Don't define size of hextab. |
| 969 | |
| 970 | Tue May 2 18:32:24 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 971 | |
| 972 | * configure.in (--enable-netrom): New configuration option. |
| 973 | * Makefile.in (REMOTE_OBS): Rename from REMOTE_O, append |
| 974 | value of NETROM_OBS. |
| 975 | (NETROM_OBS): New variable. |
| 976 | * remote-nrom.c: New file, NetROM target support. |
| 977 | * config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use |
| 978 | REMOTE_OBS instead of REMOTE_O. |
| 979 | start-sanitize-arc |
| 980 | * config/arc/arc.mt: Ditto. |
| 981 | end-sanitize-arc |
| 982 | |
| 983 | Fri Apr 28 23:30:00 1995 Stu Grossman (grossman@cygnus.com) |
| 984 | |
| 985 | * array-rom.c (_initialize_array array_open): Move baud_rate |
| 986 | initialization from _initxxx to array_open to fix bug with |
| 987 | overriding -b command line option. |
| 988 | |
| 989 | Thu Apr 27 20:29:34 1995 Doug Evans <dje@canuck.cygnus.com> |
| 990 | |
| 991 | * Makefile.in (RUNTEST): Fix reference of `srcdir'. |
| 992 | |
| 993 | Wed Apr 26 19:01:08 1995 Steve Chamberlain <sac@slash.cygnus.com> |
| 994 | |
| 995 | * remote-hms.c: Rewrite to use new monitor conventions. |
| 996 | |
| 997 | Tue Apr 25 11:27:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 998 | |
| 999 | * dbxread.c: Add comment explaining lowest_text_address. |
| 1000 | Add comment regarding stringtab_global and psymtabs. |
| 1001 | |
| 1002 | Sat Apr 22 01:26:29 1995 Jeff Law (law@snake.cs.utah.edu) |
| 1003 | |
| 1004 | * config/pa/tm-hppa.h (EXTRACT_STRUCT_VALUE_ADDRESS): Fix. |
| 1005 | |
| 1006 | * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Rewrite to correctly |
| 1007 | handle "short", "int" and small structures returned in registers. |
| 1008 | |
| 1009 | Fri Apr 21 12:57:53 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 1010 | |
| 1011 | * minsyms.c: add new function lookup_minimal_symbol_text, to look |
| 1012 | for text symbol only. |
| 1013 | * breakpoint.c (create_longjmp_breakpoint): call |
| 1014 | lookup_minimal_symbol_text instead of lookup_minimal_symbol. |
| 1015 | * symtab.h: add lookup_minimal_symbol_text prototype. |
| 1016 | |
| 1017 | Fri Apr 21 12:03:44 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 1018 | |
| 1019 | * sh-tdep.c (sh-opc.h): Don't include. |
| 1020 | (gdbcore.h): Include. |
| 1021 | (frame_find_saved_regs): Remove unused local. |
| 1022 | |
| 1023 | Thu Apr 20 10:12:21 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1024 | |
| 1025 | * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc), |
| 1026 | mdebugread.c (struct symloc), hpread.c (struct symloc): Clean |
| 1027 | up comments. |
| 1028 | |
| 1029 | Wed Apr 19 16:58:11 1995 Stu Grossman (grossman@andros.cygnus.com) |
| 1030 | |
| 1031 | * hppa-tdep.c (deposit_17): New routine to deposit 17 bit |
| 1032 | constants into PA instructions. |
| 1033 | * Put #ifdefs around all signal handling code. Not generally |
| 1034 | needed for embedded boards. |
| 1035 | * (hppa_fix_call_dummy): Parameterize offsets into call dummy to |
| 1036 | allow different dummys to be used by this code. Use |
| 1037 | INSTRUCTION_SIZE instead of REGISTER_SIZE for things. |
| 1038 | Conditionalize setup of _sr4export fixup. Improve comments. |
| 1039 | * config/pa/tm-hppa.h: Define INSTRUCTION_SIZE. Use a different |
| 1040 | call dummy if PA_LEVEL_0 is defined. Better comments for call |
| 1041 | dummys. Define offsets for LDIL/LDO instructions which load |
| 1042 | function addresses. |
| 1043 | * config/pa/tm-pro.h: Get rid of signal handling stuff. Define |
| 1044 | PA_LEVEL_0 to disable mucking with space regs and such. |
| 1045 | |
| 1046 | Mon Apr 17 15:37:08 1995 Stu Grossman (grossman@andros.cygnus.com) |
| 1047 | |
| 1048 | * cpu32bug-rom.c monitor.h op50-rom.c remote-est.c rom68k-rom.c |
| 1049 | w89k-rom.c: Remove loadtypes, loadprotos and baudrates. |
| 1050 | * op50-rom.c: Fix copyrights and add load routine to op50n_cmds. |
| 1051 | * rom68k-rom.c (_initialize_rom68k): Don't set baud rate. |
| 1052 | * w89k-rom.c: Fix copyrights. |
| 1053 | |
| 1054 | Sun Apr 16 14:00:55 1995 Stu Grossman (grossman@andros.cygnus.com) |
| 1055 | |
| 1056 | * monitor.c: Move all xmodem stuff into xmodem.[ch]. Remove |
| 1057 | unnecessary remoteloadprotocol and remoteloadtype support. |
| 1058 | * (expect expect_prompt): Change names to monitor_expect and |
| 1059 | monitor_expect_prompt. Make them global. |
| 1060 | * (printf_monitor): Change name to monitor_printf. Make global. |
| 1061 | * (monitor_read_memory): Flush command echo to avoid parsing |
| 1062 | ambiguity with CPU32Bug monitor. |
| 1063 | * (monitor_load): Remove remoteloadprotocol and remoteloadtype |
| 1064 | support. Call target_ops->load_routine, default to |
| 1065 | monitor_load_srec. |
| 1066 | * (monitor_load_srec): Remove everything but S-record support. |
| 1067 | * monitor.h (monitor_ops): Add load_routine to provide monitor |
| 1068 | specific download capability. |
| 1069 | * remote-est.c: Clean up copyrights and comments. |
| 1070 | * w89k-rom.c: Use new xmodem support. |
| 1071 | * xmodem.c xmodem.h: New files to support xmodem downloads. |
| 1072 | * rom68k-rom.c remote-est.c: Fix copyrights, add load_routine |
| 1073 | entry to monitor_ops. |
| 1074 | * cpu32bug-rom.c: New file to support Moto BCC debuggers. |
| 1075 | * config/m68k/est.mt (TDEPFILES): Add cpu32bug.o. |
| 1076 | * config/pa/hppapro.mt (TDEPFILES): Add xmodem.o. |
| 1077 | |
| 1078 | Sat Apr 15 18:00:15 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1079 | |
| 1080 | * rem-multi.shar: Removed; superceded by gdbserver. |
| 1081 | |
| 1082 | Fri Apr 14 12:10:24 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 1083 | |
| 1084 | * xcoffread.c (xcoff_sym_fns): Revise comment about merging this |
| 1085 | with coffread.c. |
| 1086 | |
| 1087 | * breakpoint.c (fixup_breakpoints): Removed. |
| 1088 | * rs6000-nat.c (vmap_symtab): Don't call fixup_breakpoints. |
| 1089 | (vmap_ldinfo, xcoff_relocate_core): Call breakpoint_re_set. |
| 1090 | |
| 1091 | * coffread.c (coff_symfile_offsets): Allocate SECT_OFF_MAX |
| 1092 | sections, not just SECT_OFF_MAX-1. |
| 1093 | |
| 1094 | * rs6000-nat.c (vmap_symtab), xcoffread.c: Re-do section offsets |
| 1095 | to be indexed by SECT_OFF_* instead of xcoff section numbers. |
| 1096 | * objfiles.c, remote.c: Remove comments regarding SECT_OFF_*. |
| 1097 | * symtab.h: Revise comment about block_line_section. |
| 1098 | * rs6000-nat.c (vmap_symtab): Don't relocate objfile->sections. |
| 1099 | |
| 1100 | Sat Apr 15 14:15:14 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 1101 | |
| 1102 | * mpw-make.in (init.c): Don't try to do symbolic {o} in sed |
| 1103 | command, not allowed by some version of MPW Make. |
| 1104 | * ser-mac.c (mac-setbaudrate): Make it actually set baud rates. |
| 1105 | |
| 1106 | Sat Apr 15 14:05:09 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1107 | |
| 1108 | * alpha-tdep.c (alpha_push_arguments): Fix typo (TYPE_VALUE -> |
| 1109 | VALUE_TYPE). Do the cast for TYPE_CODE_BOOL, TYPE_CODE_CHAR, |
| 1110 | TYPE_CODE_ENUM, and TYPE_CODE_RANGE as well as TYPE_CODE_INT. |
| 1111 | |
| 1112 | Sat Apr 15 14:04:32 1995 Per Bothner <bothner@cygnus.com> |
| 1113 | |
| 1114 | * alpha-tdep.c (alpha_push_arguments): Only cast to long for |
| 1115 | TYPE_CODE_INT. |
| 1116 | |
| 1117 | start-sanitize-gdbtk |
| 1118 | Sat Apr 15 13:52:24 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 1119 | |
| 1120 | * gdbtk.c (gdb_disassemble): Read from inferior if connected |
| 1121 | to a VxWorks target. |
| 1122 | |
| 1123 | Fri Apr 14 10:18:20 1995 Stu Grossman (grossman@cygnus.com) |
| 1124 | |
| 1125 | * README.GDBTK: New file. Contains the obvious. |
| 1126 | end-sanitize-gdbtk |
| 1127 | |
| 1128 | Thu Apr 13 16:17:04 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| 1129 | |
| 1130 | * remote-array.c: New file for Array Tech LSI33k based controller |
| 1131 | board. |
| 1132 | |
| 1133 | Thu Apr 13 12:23:31 1995 Kung Hsu <kung@rtl.cygnus.com> |
| 1134 | |
| 1135 | * a29k-tdep.c (get_longjmp_target): Replace SWAP_TARGET_AND_HOST with |
| 1136 | extract_address. |
| 1137 | * remote-vxsparc.c: New file, preliminary check in, this configuration |
| 1138 | not supported yet. |
| 1139 | * remote-vxmips.c: ditto. |
| 1140 | |
| 1141 | Thu Apr 13 12:10:14 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1142 | |
| 1143 | * rs6000-tdep.c (xcoff_add_toc_to_loadinfo): Don't use a prototype |
| 1144 | to declare the function. |
| 1145 | |
| 1146 | Wed Apr 12 16:40:20 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 1147 | |
| 1148 | * monitor.h (init_monitor_ops): Declare. |
| 1149 | * rom68k-rom.c: Clarify some comments. |
| 1150 | (rom68k_open): Define as static, to match decl. |
| 1151 | |
| 1152 | Wed Apr 12 16:36:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1153 | |
| 1154 | * gdb.gdb: New file. |
| 1155 | * .gdbinit: Move list-objfiles to gdb.gdb. |
| 1156 | |
| 1157 | * values.c (set_internalvar): Set modifiable flag of newval. |
| 1158 | |
| 1159 | Wed Apr 12 14:34:31 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 1160 | |
| 1161 | * xcoffread.c: Call complain() rather than error() or printing a |
| 1162 | warning. |
| 1163 | |
| 1164 | start-sanitize-arc |
| 1165 | Wed Apr 12 08:15:27 1995 Doug Evans <dje@canuck.cygnus.com> |
| 1166 | |
| 1167 | * arc-tdep.c: #include "gdbcmd.h". |
| 1168 | (codestream_seek): Pass CORE_ADDR. |
| 1169 | (arc_cpu_type, tmp_arc_cpu_type, arc_cpu_type_table): New globals. |
| 1170 | (debug_pipeline_p): Likewise. |
| 1171 | (X_...): Instruction field access macros. |
| 1172 | (BUILD_INSN): Define. |
| 1173 | (codestream_tell): Allow for stream elements > 1 byte. |
| 1174 | (codestream_fill): Likewise. |
| 1175 | (setup_prologue_scan): New function. |
| 1176 | (arc_get_frame_setup): Call it. Update to current spec |
| 1177 | regarding prologues. Use BUILD_INSN. |
| 1178 | (skip_prologue): New argument `frameless_p'. Use BUILD_INSN. |
| 1179 | (arc_frame_saved_pc): New function. |
| 1180 | (frame_find_saved_regs): Use BUILD_INSN. |
| 1181 | (get_insn_type, single_step): New functions. |
| 1182 | (one_stepped): New global. |
| 1183 | (arc_set_cpu_type_command, arc_show_cpu_type_command): New functions. |
| 1184 | (arc_set_cpu_type): New function. |
| 1185 | (_initialize_arc_tdep): Define new `set' commands `cpu', |
| 1186 | `displaypipeline', and `debugpipeline'. |
| 1187 | * remote-arc.c (break_insn): Add bi-endian support. |
| 1188 | (arc_insert_breakpoint): Likewise. |
| 1189 | (arc_remove_breakpoint): Likewise. |
| 1190 | (switch_command): Delete. |
| 1191 | * arc/tm-arc.h (TARGET_BYTE_ORDER): Delete. |
| 1192 | (TARGET_BYTE_ORDER_SELECTABLE): Define. |
| 1193 | (DEFAULT_ARC_CPU_TYPE): Define. |
| 1194 | (SKIP_PROLOGUE_FRAMELESS_P): Define. |
| 1195 | (BREAKPOINT): Delete. |
| 1196 | (BIG_BREAKPOINT, LITTLE_BREAKPOINT): Define. |
| 1197 | (DECR_PC_AFTER_BREAK): Change to 8. |
| 1198 | (NO_SINGLE_STEP): Define. |
| 1199 | (ARC_PC_TO_REAL_ADDRESS): Define. |
| 1200 | (SAVED_PC_AFTER_CALL): Use it. |
| 1201 | (NUM_REGS, REGISTER_BYTES): Fix. |
| 1202 | (FRAME_SAVED_PC): Call arc_frame_saved_pc. |
| 1203 | (FRAME_LOCALS_ADDRESS): Fix. |
| 1204 | end-sanitize-arc |
| 1205 | |
| 1206 | Tue Apr 11 16:42:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1207 | |
| 1208 | * top.c, utils.c, defs.h: Remove error_hook. It is currently |
| 1209 | unused and would need to hook into error_begin()/return_to_top_level(), |
| 1210 | instead of error(), if it were to be used. |
| 1211 | |
| 1212 | Tue Apr 11 13:46:25 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 1213 | |
| 1214 | * utils.c, defs.h (warning_begin): Renamed from warning_setup, for |
| 1215 | consistency with error_begin. Also print warning_pre_print. |
| 1216 | Document it better. |
| 1217 | * utils.c (warning): Use it. |
| 1218 | * utils.c (error_begin): Doc fix. |
| 1219 | * rs6000-nat.c (vmap_ldinfo): If we don't find ldinfo for the |
| 1220 | symfile_objfile, nuke it. |
| 1221 | |
| 1222 | Tue Apr 11 09:35:20 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1223 | |
| 1224 | * printcmd.c (print_address_numeric): Pass use_local to |
| 1225 | print_longest, rather than always passing 1. |
| 1226 | |
| 1227 | * nlm/Makefile.in: Remove comments discussing munch. |
| 1228 | |
| 1229 | start-sanitize-gdbtk |
| 1230 | Tue Apr 11 11:07:12 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1231 | |
| 1232 | * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, but |
| 1233 | F_SETOWN is, use that. |
| 1234 | end-sanitize-gdbtk |
| 1235 | |
| 1236 | Mon Apr 10 18:31:57 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 1237 | |
| 1238 | Merge in support for Mac MPW as a host. |
| 1239 | (Old change descriptions retained for informational value.) |
| 1240 | |
| 1241 | * mpw-config.in (i386-unknown-go32): Change from aout. |
| 1242 | (sh-hitachi-hms): New target. |
| 1243 | * mpw-make.in (BISON): Use byacc instead of bison. |
| 1244 | (VERSION): Bump to 4.14.1. |
| 1245 | (*-pinsn.*): Remove mentions everywhere. |
| 1246 | (all): Don't build MacGDB. |
| 1247 | (gdb, SiowGDB): Depend on Version.r. |
| 1248 | (Version.r): Generate from version info. |
| 1249 | * main.c (main): Pass program name to START_PROGRESS, END_PROGRESS. |
| 1250 | (main) [MPW]: Remove debugging hook. |
| 1251 | * mac-xdep.c (debug_openp): New flag. |
| 1252 | (mac_init): Set flag if env variable defined. |
| 1253 | * ser-mac.c (mac_open): Clarify error message. |
| 1254 | (mac_readchar): Call PROGRESS while looping. |
| 1255 | (mac_write): Call sleep instead of sec_sleep. |
| 1256 | (sec_sleep): Remove. |
| 1257 | * source.c (openp) [MPW]: Only print debugging info if debugging. |
| 1258 | * utils.c (query) [MPW]: Clarify that behavior is a bug. |
| 1259 | |
| 1260 | * mpw-make.in (init.c): Use open-brace instead of mpw-open-brace. |
| 1261 | |
| 1262 | * main.c, source.c: Remove hacks that replace long strings |
| 1263 | with shorter ones, now solved portably. |
| 1264 | |
| 1265 | * config/m68k/xm-mpw.h (spin.h): Include. |
| 1266 | (ALMOST_STDC): Only define if MPW_C. |
| 1267 | * config/m68k/tm-mac.h: New file, Mac target definitions. |
| 1268 | |
| 1269 | * mpw-config.in (m68k-apple-macos, ppc-apple-macos, |
| 1270 | i386-unknown-aout): New targets. |
| 1271 | (mk.tmp): Add *DEPFILES definitions. |
| 1272 | * mpw-make.in: Remove gC rules, clean up definitions for other |
| 1273 | include files, bump version, fix bogus \ that should be \Option-d. |
| 1274 | (init.c): Build correctly. |
| 1275 | |
| 1276 | * mpw-make.in (HFILES_NO_SRCDIR): Add somsolib.h |
| 1277 | (ALLDEPFILES): Add somsolib.c. |
| 1278 | (somsolib.o): Add some dependencies. |
| 1279 | |
| 1280 | * mpw-config.in: Use nm-empty.h if host is not target. |
| 1281 | (xdepfiles): Add mac-xdep.c.o. |
| 1282 | (xm_file): Remove. |
| 1283 | * mpw-make.in: Add Fortran files. |
| 1284 | (XDEPFILES): Remove. |
| 1285 | |
| 1286 | * mpw-config.in (MacSerial.h): Duplicate from standard Serial.h. |
| 1287 | * ser-mac.c (MacSerial.h): Include instead of Serial.h. |
| 1288 | |
| 1289 | * mpw-make.in: Use {s} instead of {srcdir} everywhere. |
| 1290 | (bindir, libdir): Remove extra colon. |
| 1291 | (source.c): Compile with C instead of gC. |
| 1292 | (c-exp.tab.c, ch-exp.tab.c, m2-exp.tab.c): Add {o}. |
| 1293 | (install-only): Don't install MacGDB. |
| 1294 | * source.c (openp) [MPW]: Add a debugging display. |
| 1295 | (open_source_file) [MPW]: Use MPW basename finders. |
| 1296 | [MPW_C]: Briefer versions of help for line and list commands. |
| 1297 | |
| 1298 | * mpw-make.in: Change references from paread.c to somread.c |
| 1299 | |
| 1300 | * mpw-make.in (VERSION): Update to 4.12.3. |
| 1301 | (SiowGDB): New target, GDB using SIOW library. |
| 1302 | (init-new.c): New target, attempt to generate init.c from sources. |
| 1303 | (main.c.o, top.c.o): Put each in its own segment. |
| 1304 | * main.c (main) [MPW]: Always call mac_init. |
| 1305 | * utils.c (query) [MPW]: Always return "yes" if in MacGDB, output |
| 1306 | an extra newline otherwise. |
| 1307 | * mac-xdep.c: More comments in various places, remove junk. |
| 1308 | (mac_init): Add tests for MPW and SIOW. |
| 1309 | (use_wne, has_color_qd): Renamed. |
| 1310 | (use_color_qd): New variable. |
| 1311 | (grow_window): Only do console resizing to console window, |
| 1312 | call resize_console_window. |
| 1313 | (zoom_window): Call resize_console_window. |
| 1314 | (resize_console_window, scroll_text): New functions. |
| 1315 | (adjust_console_sizes): Always align viewrect to even multiples of |
| 1316 | text lines. |
| 1317 | (adjust_console_text): Always scroll by whole lines. |
| 1318 | (hacked_vfprintf, hacked_puts, hacked_fputc, hacked_putc): Force a |
| 1319 | recalculation of scroll positions if a newline was output. |
| 1320 | (hacked_fflush): Similarly, for flushing. |
| 1321 | (hacked_fgetc): New function, aborts if called in MacGDB. |
| 1322 | * ser-mac.c (mac_readchar): Rename starttime to start_time, |
| 1323 | remove debugging printf. |
| 1324 | (mac_write): Sleep on first 4 writes. |
| 1325 | (sec_sleep): New function, works like standard sleep. |
| 1326 | * macgdb.r: Adjust positioning and contents of About box. |
| 1327 | Set minimum size to 2000K, preferred size to 5000K. |
| 1328 | * config/m68k/xm-mpw.h (fgetc): Define as a macro. |
| 1329 | |
| 1330 | * mpw-make.in (.c.o, .gc.o): Prefix segment names with gdb_. |
| 1331 | (top.c.o, annotate.c.o): Add build rules. |
| 1332 | * macgdb.r (SysTypes.r): Include. |
| 1333 | ('vers'): New resource, version info. |
| 1334 | (mFile, mEdit, mDebug): Enable all menu items. |
| 1335 | (mDebug): Add key equivalents for continue, step, next. |
| 1336 | (wConsole): Add zoom and close boxes to window. |
| 1337 | * mac-xdep.c (new_console_window): New function, code taken from |
| 1338 | mac_init. |
| 1339 | (mac_command_loop): Use GetCaretTime for wait interval, call |
| 1340 | do_idle on null events. |
| 1341 | (do_idle): New function. |
| 1342 | (zoom_window): Implement zooming. |
| 1343 | (v_scroll_proc): New function, handles vertical scrolling. |
| 1344 | (activate_window): Do activation of console window. |
| 1345 | (do_menu_command): Implement items of file, edit, and debug menus. |
| 1346 | (do_keyboard_command): Fix command extraction. |
| 1347 | (adjust_console_sizes, adjust_console_text): New functions. |
| 1348 | (hacked_fprintf, hacked_vfprintf, hacked_fputs, hacked_fputc, |
| 1349 | hacked_putc): Don't call draw_console. |
| 1350 | * ser-mac.c (mac_open): Add an error message for invalid ports. |
| 1351 | (first_mac_write): New global. |
| 1352 | (mac_write): Use first_mac_write to sleep on first several writes. |
| 1353 | |
| 1354 | * mpw-make.in (INCLUDE_CFLAGS): Add readline source dir. |
| 1355 | (READLINE_CFLAGS, READLINE_SRC, READLINE_DIR): Uncomment. |
| 1356 | (TSOBS): Don't compile inflow.c. |
| 1357 | (all, install): Add MacGDB. |
| 1358 | * main.c (main): Do Mac-specific init and command loop if a |
| 1359 | standalone app, skip full option help message if compiling |
| 1360 | with MPW C. |
| 1361 | (gdb_readline): If MPW, add a newline after the (gdb) prompt. |
| 1362 | * utils.c (_initialize_utils): If MPW, don't try to use termcap to |
| 1363 | compute the window size. |
| 1364 | * config/m68k/xm-mpw.h (printf, fprintf, fputs, fputc, putc, |
| 1365 | fflush): Define as macros that expand into hacked_... versions. |
| 1366 | (StandAlone, mac_app): Declare. |
| 1367 | * macgdb.r (SIZE): Set the default partition to 4000K. |
| 1368 | * mac-xdep.c (readline.h, history.h): Include. |
| 1369 | (terminal.h): Don't include. |
| 1370 | (mac_app): Define. |
| 1371 | (gdb_has_a_terminal): Define Mac-specific version. |
| 1372 | (do_keyboard_command): Simplify search for command string. |
| 1373 | (readline): Define as gdb_readline. |
| 1374 | Add other history/readline stubs to make main gdb link. |
| 1375 | (hacked_fprintf, hacked_printf, hacked_vfprintf, hacked_fputs, |
| 1376 | hacked_fputc, hacked_fflush): New functions, intercept output to |
| 1377 | stdout and stderr, send to console window. |
| 1378 | |
| 1379 | * mpw-make.in (MacGDB): New target, standalone Mac-hosted gdb. |
| 1380 | (XDEPFILES): Define. |
| 1381 | (main.c.o): Compile with gC instead of C. |
| 1382 | * mac-defs.h: New file, menu etc definitions shared between |
| 1383 | C and Rez files. |
| 1384 | * macgdb.r: New file, Rez (resource compiler) resource |
| 1385 | definitions. |
| 1386 | * mac-xdep.c: New file, Mac host interface code. |
| 1387 | * config/m68k/xm-mpw.h (PATHNAME_SEPARATOR): Rename to |
| 1388 | DIRNAME_SEPARATOR. |
| 1389 | (PATHNAME_SEPARATOR_STRING): Remove. |
| 1390 | (SIGQUIT, SIGHUP): Define. |
| 1391 | (fileno, R_OK): Define. |
| 1392 | |
| 1393 | * mpw-config.in: New file, MPW configuration fragment. |
| 1394 | * mpw-make.in: New file, MPW makefile fragment. |
| 1395 | * config/m68k/xm-mpw.h: New file, MPW host definitions. |
| 1396 | * ser-mac.c: New file, Mac serial interface. |
| 1397 | |
| 1398 | Mon Apr 10 16:47:57 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 1399 | |
| 1400 | * valprint.c (print_longest): Fix a syntax error in #ifdef |
| 1401 | PRINTF_HAS_LONG_LONG. |
| 1402 | |
| 1403 | * config/mips/xm-irix5.h: turn on CC_HAS_LONG_LONG and |
| 1404 | PRINTF_HAS_LONG_LONG. |
| 1405 | * config/mips/tm-irix5.h: turn on FORCE_LONG_LONG. |
| 1406 | |
| 1407 | Sat Apr 8 02:47:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 1408 | |
| 1409 | * mdebugread.c (parse_symbol): Use new variable |
| 1410 | nodebug_var_symbol_type as type of variables which don't have any |
| 1411 | ecoff debug info associated with them. |
| 1412 | (parse_symbol, parse_procedure): Use heuristics to determine if |
| 1413 | functions were compiled without debugging info and change their |
| 1414 | type to nodebug_function_symbol_type. |
| 1415 | (_initialize_mdebugread): Initialize nodebug_*_symbol_type. |
| 1416 | |
| 1417 | * source.c (line_info): Clear sal.pc for `info line' without |
| 1418 | arguments. |
| 1419 | |
| 1420 | Fri Apr 7 17:43:01 1995 Stu Grossman (grossman@andros.cygnus.com) |
| 1421 | |
| 1422 | * monitor.c: make_xmodem_packet and print_xmodem_packet go away. |
| 1423 | send_xmodem_packet shows up to do the obvious. Lots of fixes to |
| 1424 | xmodem downloads including resetting of block number at start of |
| 1425 | new transfers, fix for buffer overrun problem, addition of CRC |
| 1426 | generation code. |
| 1427 | * (monitor_open): loadtype_str and loadproto_str now default to |
| 1428 | first entry in monitor_ops->loadtypes. |
| 1429 | * (monitor_wait): Lengthen register dump buf, because of verbose |
| 1430 | Winbond monitor. |
| 1431 | * (monitor_fetch_register): Report unimplemented registers as 0. |
| 1432 | * (monitor_read_memory): Only do 16 byte aligned transfers |
| 1433 | because of formatting weirdness with the Winbond monitor. Also, |
| 1434 | ignore non-hex, non-whitespace formatting between bytes (same |
| 1435 | monitor). |
| 1436 | * (monitor_load): Clean up logic. |
| 1437 | * (monitor_load_srec): Re-do xmodem support. Move lots of it |
| 1438 | into send_xmodem_packet. |
| 1439 | * (getacknak): Get rid of polls and timeouts. Handle CRC |
| 1440 | requests from receiver. |
| 1441 | * (monitor_make_srec): Efficiency improvements. Don't call |
| 1442 | sprintf to output two digit hex numbers. |
| 1443 | * (crcinit, docrc): New, CRC-16 support routines. |
| 1444 | * (send_xmodem_packet): New routine to generate either CRC-16 or |
| 1445 | checksummed xmodem packets. |
| 1446 | |
| 1447 | * remote-est.c (est_loadtypes), rom68k-rom.c (rom68k_loadtypes): |
| 1448 | Reduce tables down to only the load types supported by each |
| 1449 | monitor. |
| 1450 | |
| 1451 | * w89k-rom.c (w89k_supply_register): Parses output of Winbond |
| 1452 | register dumps. |
| 1453 | * (w89k_loadtypes, w89k_loadprotos): Reduce to just srec/xmodem. |
| 1454 | * (w89k_cmds): Add clear all breakpoints, memory fill, and dump |
| 1455 | registers commands. |
| 1456 | |
| 1457 | * config/pa/tm-hppa.h: Define lots register offsets needed by |
| 1458 | w89k-rom.c. |
| 1459 | |
| 1460 | |
| 1461 | Thu Apr 6 17:00:46 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1462 | |
| 1463 | * Makefile.in (X11_INCLUDES): Define as empty. |
| 1464 | (X11_CFLAGS): Define as including $(X11_INCLUDES). |
| 1465 | (X11_LIB_SWITCHES): Define as empty. |
| 1466 | (X11_LIBS): Define as -lX11. |
| 1467 | |
| 1468 | start-sanitize-gdbtk |
| 1469 | * configure.in (enable_gdbtk): If gdbtk, support the --x-includes |
| 1470 | and --x-libraries switches, setting the X11_INCLUDES and |
| 1471 | X11_LIB_SWITCHES respectively. Instead of using a hardcoded -lX11 |
| 1472 | in ENABLE_CLIBS, use the X11_LIB_SWITCHES and X11_LIBS variables. |
| 1473 | |
| 1474 | * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, don't use |
| 1475 | it. This means that the stop button doesn't work, but is better |
| 1476 | than nothing. |
| 1477 | end-sanitize-gdbtk |
| 1478 | |
| 1479 | Wed Apr 5 19:57:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1480 | |
| 1481 | * mips-tdep.c (mips_print_register): Remove unused variable |
| 1482 | our_type and call to init_type. Fixes memory leak. Reindent function. |
| 1483 | |
| 1484 | * mips-tdep.c (mips_print_register), findvar.c |
| 1485 | (write_register_bytes): Make buffer char[] instead of unsigned |
| 1486 | char[]. |
| 1487 | |
| 1488 | Mon Apr 3 19:28:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1489 | |
| 1490 | * top.c, utils.c, main.c, defs.h: Replace error_pre_print with two |
| 1491 | variables: error_pre_print (for RETURN_ERROR) and quit_pre_print |
| 1492 | (for RETURN_QUIT). Fixes a bug whereby typing ^C (e.g. in "maint |
| 1493 | print sym") could output extraneous stuff. |
| 1494 | * objfiles.c: Don't declare error_pre_print; defs.h does it. |
| 1495 | |
| 1496 | Mon Apr 3 13:48:28 1995 Stu Grossman (grossman@andros.cygnus.com) |
| 1497 | |
| 1498 | * monitor.h: Add MO_GETMEM_NEEDS_RANGE flag. |
| 1499 | * monitor.c (monitor_read_memory): Use previously mentioned flag |
| 1500 | to send proper format memory examine commands to the w89k monitor. |
| 1501 | Also, try to handle bizarre format of memory dump... |
| 1502 | |
| 1503 | * op50-rom.c w89k-rom.c: Update to new monitor.[ch] conventions. |
| 1504 | |
| 1505 | Sat Apr 1 03:22:20 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 1506 | |
| 1507 | * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: |
| 1508 | Handle relocated symbol address. |
| 1509 | * partial-stab.h, case N_SO, SOFUN_ADDRESS_MAYBE_MISSING: |
| 1510 | Do not relocate a zero address. |
| 1511 | |
| 1512 | Thu Mar 30 19:46:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1513 | |
| 1514 | * config/a29k/tm-a29k.h: Nuke obsolete define CONTROL_END_ADDR; it |
| 1515 | is nowhere used. |
| 1516 | |
| 1517 | * stabsread.c (read_range_type): Remove FIXME comment about |
| 1518 | type-id (I presume this meant a number followed by = followed by a |
| 1519 | type) versus type number; Per fixed it. |
| 1520 | |
| 1521 | Wed Mar 29 09:56:04 1995 Jason Molenda (crash@phydeaux.cygnus.com) |
| 1522 | |
| 1523 | * configure.in: sparc-*-sunos5* is same as sparc-*-solaris2*. |
| 1524 | |
| 1525 | Wed Mar 29 18:30:03 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 1526 | |
| 1527 | * remote-e7000.c (why_stop): Add new kinds of strings to expect |
| 1528 | from the emulator. |
| 1529 | (e7000_wait): Add interpretations for more stop reasons, |
| 1530 | including warnings for write protect and cycle address errors. |
| 1531 | |
| 1532 | Wed Mar 29 17:09:29 1995 Stu Grossman (grossman@cygnus.com) |
| 1533 | |
| 1534 | start-sanitize-gdbtk |
| 1535 | * Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate |
| 1536 | locations (per-host) for X11 include files. |
| 1537 | * config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force |
| 1538 | the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs |
| 1539 | of the R5 include files. |
| 1540 | end-sanitize-gdbtk |
| 1541 | * monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of |
| 1542 | support for interrupting target. |
| 1543 | * monitor.c (monitor_open): Send stop command before doing |
| 1544 | anything else. |
| 1545 | * (monitor_load_srec): Fix record size calculation to prevent end |
| 1546 | of segment from getting trashed. |
| 1547 | * rom68k-rom.c: Update to latest version of struct monitor_ops. |
| 1548 | * config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order |
| 1549 | problems. Makes DOS hosted function calling work. |
| 1550 | * sparclite/crt0.s: Define _start to make COFF happy. |
| 1551 | |
| 1552 | Wed Mar 29 09:11:51 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1553 | |
| 1554 | * defs.h (atof): Don't provide an external declaration if atof is |
| 1555 | a macro. |
| 1556 | |
| 1557 | Wed Mar 29 00:01:07 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 1558 | |
| 1559 | * rs6000-tdep.c (skip_prologue): Skip saving of LR and CR in |
| 1560 | the stack frame, fix typos in `st rx,NUM(r1)' and `stu r1,NUM(r1)' |
| 1561 | tests. |
| 1562 | |
| 1563 | Tue Mar 28 17:04:04 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 1564 | |
| 1565 | * gdbtypes.c (create_range_type): If indextype has TYPE_FLAG_STUB |
| 1566 | set, set TYPE_FLAG_TARGET_STUB. |
| 1567 | (check_stub_type): Recalculate TYPE_LENGTH for range type. |
| 1568 | * stabsread.c (read_range_type): If index type number is followed |
| 1569 | by '=', back up, call read_type. and assume we have a true range. |
| 1570 | * gdbtypes.h (TYPE_FLAG_TARGET_STUB): Update comment. |
| 1571 | |
| 1572 | Mon Mar 27 22:51:54 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 1573 | |
| 1574 | * alpha-nat.c, irix4-nat.c, irix5-nat.c, mipsv4-nat.c, |
| 1575 | sparc-tdep.c (supply_gregset, supply_fpregset): Fill inaccessible |
| 1576 | registers with zero to handle recent read_register_bytes change. |
| 1577 | * irix4-nat.c, irix5-nat.c, mipsv4-nat.c (supply_gregset, |
| 1578 | fill_gregset): Fix handling of CAUSE_REGNUM. |
| 1579 | * mips-nat.c (store_inferior_registers): Handle unwritable |
| 1580 | registers when storing a single register. |
| 1581 | * config/mips/tm-irix3.h (CAUSE_REGNUM, BADVADDR_REGNUM): |
| 1582 | Fix definitions. |
| 1583 | |
| 1584 | * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Clear |
| 1585 | allocated mips_extra_func_info, if the debug info is corrupt, |
| 1586 | the PDR to fill it in might be missing. |
| 1587 | |
| 1588 | Mon Mar 27 14:43:00 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 1589 | |
| 1590 | * vx-share/regPacket.h: a new file interfacing with vxworks. |
| 1591 | |
| 1592 | Sun Mar 26 13:22:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1593 | |
| 1594 | * breakpoint.c (bpstat_do_actions): Once we've executed the |
| 1595 | commands, set bs->commands to NULL. |
| 1596 | |
| 1597 | Sat Mar 25 01:16:10 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 1598 | |
| 1599 | * buildsym.c (patch_subfile_name): Update last_source_file |
| 1600 | with the real source file name. |
| 1601 | * dbxread.c (end_psymtab): Handle static functions in the |
| 1602 | SOFUN_ADDRESS_MAYBE_MISSING case by passing pst->filename |
| 1603 | to lookup_minimal_symbol. |
| 1604 | (process_one_symbol): Ignore extra outermost context from |
| 1605 | SunPRO cc and acc. |
| 1606 | * stabsread.c (define_symbol): Do not complain for SunPRO |
| 1607 | static variable encoding if STATIC_TRANSFORM_NAME is defined. |
| 1608 | * sparc-tdep.c, config/sparc/tm-sun4sol2.h |
| 1609 | (sunpro_static_transform_name): Renamed from |
| 1610 | solaris_static_transform_name. |
| 1611 | * config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME): |
| 1612 | Define to sunpro_static_transform_name for acc 3.0 compiled |
| 1613 | executables. |
| 1614 | * procfs.c, config/alpha/nm-osf2.h (PROCFS_DONT_TRACE_FAULTS): |
| 1615 | Renamed from PROCFS_DONT_TRACE_IFAULT, don't trace any faults |
| 1616 | if defined. |
| 1617 | * procfs.c (info_proc_siginfo): Cast sip->si_addr to |
| 1618 | `unsigned long' and use `lx' format for printing it. |
| 1619 | |
| 1620 | Fri Mar 24 15:45:42 1995 Stu Grossman (grossman@cygnus.com) |
| 1621 | |
| 1622 | * configure.in: Move test for m68*-est-* before m68*-*-coff*. |
| 1623 | * findvar.c: Move default def of CANNOT_STORE_REGISTER closer to |
| 1624 | the beginning of the code. |
| 1625 | * (write_register_gen): New routine. Analogous to |
| 1626 | read_register_gen. |
| 1627 | * (write_register_bytes): Another rewrite! Make it smarter about |
| 1628 | not updating regs with the same value. |
| 1629 | * monitor.c (printf_monitor readchar): Use stderr instead of |
| 1630 | stdout to output debug info. Also cleanup readchar a little. |
| 1631 | * (expect): Make sure that excessive responses are null |
| 1632 | terminated. |
| 1633 | * (monitor_open): Check for magic number in monitor_ops struct. |
| 1634 | Allow multiple commands as init strings. Also, clear all |
| 1635 | breakpoints. |
| 1636 | * (monitor_resume monitor_wait): Send a command to dump all the |
| 1637 | regs for those targets which don't do so when waking up after a |
| 1638 | continue command. |
| 1639 | * (monitor_wait): Handle excessive response output better. |
| 1640 | * (monitor_write_memory): Use block fill, word, and long word |
| 1641 | commands (if they exist) to write memory more efficiently. |
| 1642 | * General cleanups to use flag bits instead of individual flag |
| 1643 | words in monitor_ops struct. |
| 1644 | * (monitor_command): Return output from command. |
| 1645 | * (monitor_load_srec): Allocate buffer only once. Use alloca. |
| 1646 | Wait for load response string instead of using a timeout to start |
| 1647 | sending S-records. Fix bug where value of srec_frame shrinks. If |
| 1648 | hashmark is set, print `-' for retransmissions. General cleanups. |
| 1649 | * (monitor_make_srec): Get rid of S-record default type kludge. |
| 1650 | * monitor.h: Use seperate struct for memory and register |
| 1651 | read/write commands. Memory commands can come in byte, word, |
| 1652 | long, and longlong forms. |
| 1653 | * (monitor_ops): Change lots of fields. Generalize some stuff. |
| 1654 | Put all flags into flags word. Allow init to be a list of commands. |
| 1655 | Add command for clearing all breakpoints, block fill, dumping all |
| 1656 | registers. |
| 1657 | * remote-est.c: Rewrite to use new monitor conventions. |
| 1658 | * config/m68k/est.mt (TDEPFILES): Add monitor.o. |
| 1659 | * config/m68k/tm-est.h: Set NUM_REGS to 18. |
| 1660 | * testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test |
| 1661 | more thoroughly. |
| 1662 | |
| 1663 | Thu Mar 23 23:20:00 1995 Jeff Law (law@snake.cs.utah.edu) |
| 1664 | |
| 1665 | * somsolib.c (som_solib_add): Handle case where a shared library |
| 1666 | referenced by a core file has sections without the SEC_ALLOC bit |
| 1667 | set (eg stabs sections). |
| 1668 | |
| 1669 | Thu Mar 23 15:07:08 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1670 | |
| 1671 | * breakpoint.c (bpstat_do_actions): For each element in the bpstat |
| 1672 | chain, do all the commands regardless of whether they run the |
| 1673 | inferior. |
| 1674 | |
| 1675 | Wed Mar 22 19:17:06 1995 Doug Evans <dje@cygnus.com> |
| 1676 | |
| 1677 | * mem-break.c (LITTLE_BREAKPOINT, BIG_BREAKPOINT): Define as |
| 1678 | BREAKPOINT if mono-endian. |
| 1679 | (break_insn): Deleted. |
| 1680 | (big_break_insn, little_break_insn): Define. |
| 1681 | (memory_insert_breakpoint): Handle bi-endian cpus. |
| 1682 | (BREAKPOINT_LEN): Define. |
| 1683 | (memory_remove_breakpoint): Use it. |
| 1684 | (memory_breakpoint_size): Likewise. |
| 1685 | |
| 1686 | Tue Mar 21 17:03:17 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 1687 | |
| 1688 | * sparc-stub.c: add nop after 'bg good_wim'. |
| 1689 | * sparcl-stub.c: ditto. |
| 1690 | |
| 1691 | Tue Mar 21 13:34:12 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1692 | |
| 1693 | * infrun.c (handle_command): Don't print TARGET_SIGNAL_0, |
| 1694 | TARGET_SIGNAL_UNKNOWN, or TARGET_SIGNAL_DEFAULT. |
| 1695 | |
| 1696 | Mon Mar 20 10:09:59 1995 Jeff Law (law@snake.cs.utah.edu) |
| 1697 | |
| 1698 | * hppab-nat.c (store_inferior_registers): Sync with HPUX version. |
| 1699 | |
| 1700 | Mon Mar 20 07:34:48 1995 Stu Grossman (grossman@cygnus.com) |
| 1701 | |
| 1702 | * hppah-nat.c (store_inferior_registers): Move check for |
| 1703 | CANNOT_STORE_REGISTER to a better place. Fixes ptrace I/O errors |
| 1704 | found by test suite during function calls, which attempts to write |
| 1705 | unwritable registers. |
| 1706 | |
| 1707 | Sat Mar 18 02:02:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 1708 | |
| 1709 | * mdebugread.c (parse_symbol): If finishing a function without |
| 1710 | known parameter type info, set that from parameter symbols. |
| 1711 | Remove commented-out add_param_to_type support. |
| 1712 | |
| 1713 | Thu Mar 16 16:38:03 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1714 | |
| 1715 | * xcoffread.c (process_linenos): Make sure filename we pass to |
| 1716 | start_subfile will cause deduce_language_from_filename to return |
| 1717 | the correct thing. Reindent function to GNU standards. |
| 1718 | |
| 1719 | Thu Mar 16 15:54:00 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| 1720 | |
| 1721 | * nlm/gdbserve.c (handle_exception): #if out call to StopBell, |
| 1722 | as it is not available on NetWare 3 or PIN. |
| 1723 | * nlm/ppc.c (StopBell): Removed. |
| 1724 | |
| 1725 | Thu Mar 16 12:14:41 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1726 | |
| 1727 | * xcoffread.c (read_xcoff_symtab): When creating a dummy parameter |
| 1728 | inferred from the traceback tags, give its type the name |
| 1729 | "<non-float parameter>". |
| 1730 | |
| 1731 | * stabsread.c (rs6000_builtin_type): Recognize types -31 to -34. |
| 1732 | |
| 1733 | Wed Mar 15 15:09:29 1995 Stu Grossman (grossman@cygnus.com) |
| 1734 | |
| 1735 | * findvar.c (read_register_bytes write_register_bytes): Make |
| 1736 | these routines much smarter about updating registers from the |
| 1737 | target, only doing so when absolutely necessary. This really |
| 1738 | speeds up register modification on some remote targets. |
| 1739 | |
| 1740 | * monitor.c: More cleanups. Get rid of monitor_load_ascii_srec. |
| 1741 | BFD makes this unnecessary. Lots of debugging speedups. |
| 1742 | * (expect): NULL terminate return string. |
| 1743 | * (monitor_open monitor_supply_register parse_register_dump |
| 1744 | monitor_wait monitor_fetch_register): Switch to using GNU regexp |
| 1745 | library to parse multi-register displays. |
| 1746 | * (monitor_read_memory): Read multiple bytes (up to 16) at once. |
| 1747 | * (monitor_create_inferior): Call clear_proceed_status to make run |
| 1748 | command notice first breakpoint. |
| 1749 | * (monitor_load): Clean up. Reset inferior_pid, set pc to start |
| 1750 | address and reset symbol table stuff to make loads put things into |
| 1751 | a fresh state. |
| 1752 | * (monitor_load_srec): Lower sleep time to 1 second. |
| 1753 | |
| 1754 | * monitor.h (struct monitor_ops): Add register_pattern and |
| 1755 | supply_register to monitor_ops. |
| 1756 | |
| 1757 | * rom68k-rom.c: Add new support for handling register dumps. |
| 1758 | * config/m68k/tm-m68k.h: Define D0_REGNUM and A0_REGNUM for register |
| 1759 | dump handling. |
| 1760 | |
| 1761 | Wed Mar 15 15:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1762 | |
| 1763 | * utils.c, defs.h (putchar_unfiltered, fputc_unfiltered): Make |
| 1764 | argument be an int, not a char. Using a prototype followed by an |
| 1765 | old-style function definition in a case where an argument is |
| 1766 | widened is a GCC-ism not supported by the native AIX compiler. |
| 1767 | |
| 1768 | Wed Mar 15 12:22:35 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| 1769 | |
| 1770 | * nlmstub.def: Removed, this was moved to nlm/gdbserve.def |
| 1771 | long ago. |
| 1772 | |
| 1773 | * configure.in (alpha-*-netware*): Removed configuration. |
| 1774 | * config/alpha/{alpha-nw.mt, gdbserve.mt, tm-alphanw.h}: Removed. |
| 1775 | * nlm/{README-ALPHA-NETWARE, aio.h, alpha-io.S, alpha-regdef.h, |
| 1776 | alpha.c, alpha.h, altdebug.h}: Removed. |
| 1777 | |
| 1778 | * nlm/gdbserve.c (main): Add support for processing BOARD= |
| 1779 | argument, deprecate NODE=. |
| 1780 | |
| 1781 | Wed Mar 15 10:58:26 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1782 | |
| 1783 | * c-exp.y (yylex): Make an empty character constant an error. |
| 1784 | |
| 1785 | Tue Mar 14 15:00:54 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 1786 | |
| 1787 | * valops.c (value_arg_coerce): Do possible value_coerce_array |
| 1788 | before determining type argument to value_cast. |
| 1789 | |
| 1790 | Tue Mar 14 10:41:41 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 1791 | |
| 1792 | * remote-es.c: Replace ignore with 0. |
| 1793 | |
| 1794 | Tue Mar 14 05:52:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1795 | |
| 1796 | * valops.c (value_repeat), eval.c (evaluate_subexp_standard): |
| 1797 | If VALUE_REPEATED is already set, just error out. |
| 1798 | |
| 1799 | * valops.c (value_cast, value_slice), parse.c (follow_types): Add |
| 1800 | FIXME-type-allocation comments. |
| 1801 | |
| 1802 | * gdbtypes.h (struct type): Fix comment about what units the |
| 1803 | TYPE_LENGTH is in. |
| 1804 | |
| 1805 | Mon Mar 13 18:27:25 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 1806 | |
| 1807 | * ch-valprint.c (annotate.h): Include. |
| 1808 | * eval.c (evaluate_subexp_standard): Remove unused variable. |
| 1809 | (calc_f77_array_dims): Add parens to expression. |
| 1810 | * f-exp.y (yylex): Add parens to expression, remove unused label. |
| 1811 | * f-lang.h (calc_f77_array_dims): Declare. |
| 1812 | * f-valprint.c (f_val_print): Remove unused variables. |
| 1813 | |
| 1814 | Mon Mar 13 15:25:47 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 1815 | |
| 1816 | * alpha-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't |
| 1817 | use the PDR, just examine prologues instead. |
| 1818 | |
| 1819 | start-sanitize-arc |
| 1820 | Fri Mar 10 16:13:18 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 1821 | |
| 1822 | * config/tm-arc.h: Change arc register names. |
| 1823 | end-sanitize-arc |
| 1824 | |
| 1825 | Fri Mar 10 02:49:40 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 1826 | |
| 1827 | Fix problems with infinite recursion when printing a class |
| 1828 | that contains a static instance of the class. |
| 1829 | * cp-valprint.c (dont_print_vb_obstack): Renamed from |
| 1830 | dont_print_obstack, made static. |
| 1831 | (dont_print_statmem_obstack): New obstack, controls printing |
| 1832 | of static member classes. |
| 1833 | (_initialize_cp_valprint): Initialize it. |
| 1834 | (cp_print_static_field): New function, handles printing of |
| 1835 | static members. |
| 1836 | (cp_print_value_fields): New parameter dont_print_statmem to |
| 1837 | handle recursive printing of static member classes, use |
| 1838 | cp_print_static_field to handle printing of static members. |
| 1839 | * c-valprint.c (cp_print_value_fields): Update prototype and |
| 1840 | call to include additional dont_print_statmem parameter. |
| 1841 | * c-valprint.c, f-valprint.c (dont_print_obstack): Remove unused |
| 1842 | extern declaration. |
| 1843 | |
| 1844 | * alpha-tdep.c, findvar.c, infptrace.c: Include <string.h>. |
| 1845 | |
| 1846 | * config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS): Call |
| 1847 | alpha_find_saved_regs if fi->saved_regs is still NULL. |
| 1848 | |
| 1849 | * elfread.c (elf_symtab_read): Ensure that the filename field |
| 1850 | of a minsym is nonempty. Ignore solib trampoline symbols from |
| 1851 | the main symbol table, they might have a bogus value. |
| 1852 | |
| 1853 | * procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh: |
| 1854 | Fix typos in comments. |
| 1855 | |
| 1856 | Thu Mar 9 17:19:47 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 1857 | |
| 1858 | * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Initialize |
| 1859 | pdr.framereg field of MIPS_EFI_SYMBOL_NAME symbol to -1. That way |
| 1860 | we know whether the PDR ever got set. |
| 1861 | * mips-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't |
| 1862 | use the PDR, just examine prologues instead. |
| 1863 | |
| 1864 | Wed Mar 8 23:35:10 1995 Jeff Law (law@snake.cs.utah.edu) |
| 1865 | |
| 1866 | * somsolib.c (som_solib_section_offsets): Get offset of text |
| 1867 | section right. |
| 1868 | |
| 1869 | Wed Mar 8 16:12:21 1995 Stu Grossman (grossman@cygnus.com) |
| 1870 | |
| 1871 | start-sanitize-gdbtk |
| 1872 | * gdbtk.c (gdb_get_breakpoint_info): Return error if breakpoint |
| 1873 | type is not bp_breakpoint. |
| 1874 | end-sanitize-gdbtk |
| 1875 | |
| 1876 | * source.c (forward_search_command reverse_search_command): Set |
| 1877 | convenience variable $_ to be the line # of the match. |
| 1878 | * symtab.c (decode_line_1): Allow convenience variables to be |
| 1879 | used in line specs (for breakpoints and such). |
| 1880 | |
| 1881 | Wed Mar 8 12:51:00 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 1882 | |
| 1883 | * Makefile.in (VERSION): Bump to 4.14.1. |
| 1884 | * NEWS, README: Update for 4.14. |
| 1885 | * i386v-nat.c (i386_insert_aligned_watchpoint): Fix declaration. |
| 1886 | (i386_insert_nonaligned_watchpoint): Call aligned instead of |
| 1887 | generic watchpoint insertion. |
| 1888 | |
| 1889 | Tue Mar 7 19:26:10 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 1890 | |
| 1891 | * valops.c (value_slice): Do COERCE_VARYING_ARRAY. |
| 1892 | |
| 1893 | Tue Mar 7 00:23:47 1995 Stu Grossman (grossman@cygnus.com) |
| 1894 | |
| 1895 | * monitor.c, array-rom.c, monitor.h, rom68k-rom.c: Move target_ops |
| 1896 | into monitor.c. |
| 1897 | * monitor.c (monitor_create_inferior): Allow run command to start |
| 1898 | program. |
| 1899 | |
| 1900 | * monitor.c (monitor_load): Set PC to start address when done |
| 1901 | loading. |
| 1902 | |
| 1903 | * array-rom.c, monitor.h, rom68k-rom.c: Clean up target_ops. |
| 1904 | Remove ref to monitor_create_inferior. |
| 1905 | |
| 1906 | * monitor.c: More general cleanups. Add prototypes, remove |
| 1907 | unused routines. Fix bug with wrong number of args to error(). |
| 1908 | |
| 1909 | * main.c (main): Don't start up GUI when running under gdb mode |
| 1910 | in emacs. |
| 1911 | |
| 1912 | * Makefile.in: Add rules for monitor.o and rom68k-rom.o to make |
| 1913 | Sun make (with VPATH) work... |
| 1914 | |
| 1915 | * monitor.c, monitor.h, rom68k-rom.c: Serious cleanup to make IDP |
| 1916 | (rom68k) target work right. |
| 1917 | * array-rom.c, op50-rom.c, w89k-rom.c: Partial updates to new |
| 1918 | monitor.c interface. More work needs to be done here. |
| 1919 | * config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to |
| 1920 | match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no |
| 1921 | floating-point for this card. |
| 1922 | |
| 1923 | * serial.h, ser-go32.c, ser-go32-para.c, ser-mac.c, ser-tcp.c, |
| 1924 | ser-unix.c: Add SERIAL_SETSTOPBITS to set the number of stopbits |
| 1925 | (needed for IDP board?!?!?). |
| 1926 | |
| 1927 | * defs.h, utils.c, remote-hms.c, remote-pa.c, remote.c: Fix defs |
| 1928 | and usage of fputc_unfiltered and putchar_unfiltered. Eliminate |
| 1929 | putc_unfiltered (it's superfluous). |
| 1930 | |
| 1931 | * command.h, command.c, top.c: Add var_enum command type. It's |
| 1932 | like var_string but allows only only one of the specified strings. |
| 1933 | |
| 1934 | Mon Mar 6 15:03:59 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 1935 | |
| 1936 | * valops.c (value_cast): Don't use backslash newline--pre-ANSI |
| 1937 | compilers (such as SunOS4 /bin/cc) don't generally support it |
| 1938 | except in some contexts. |
| 1939 | |
| 1940 | Fri Mar 3 17:42:48 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 1941 | |
| 1942 | * valops.c (value_cast): Check for cast to array type *before* |
| 1943 | we coerce array to pointer (in case arg2 is already array). |
| 1944 | |
| 1945 | * valops.c (call_function_by_hand): Set using_gcc to 2 if using |
| 1946 | gcc2. Needed for REG_STRUCT_HAS_ADDR to work on sparc. |
| 1947 | Also check REG_STRUCT_HAS_ADDR for union, array and string types. |
| 1948 | |
| 1949 | * valops.c (call_function_by_hand): Re-arrange code for pushing |
| 1950 | paramaters on the stack so we can do better STACK_ALIGN. |
| 1951 | |
| 1952 | * valops.c (call_function_by_hand): Call error if the number |
| 1953 | of arguments is fewer than parameter types in function type. |
| 1954 | |
| 1955 | Fri Mar 3 17:13:05 1995 Doug Evans <dje@canuck.cygnus.com> |
| 1956 | |
| 1957 | * sparc-tdep.c (sparc_extract_struct_value_address): Move |
| 1958 | sparc64 support to here. |
| 1959 | (sparc64_extract_struct_value_address): Deleted. |
| 1960 | (dump_ccreg): Add a prototype so long long arg -> int. |
| 1961 | * sparc/tm-sp64.h (USE_STRUCT_CONVENTION): Define. |
| 1962 | (EXTRACT_STRUCT_VALUE_ADDRESS): Delete. |
| 1963 | |
| 1964 | Fri Mar 3 15:12:12 1995 Jeff Law (law@snake.cs.utah.edu) |
| 1965 | |
| 1966 | * hpread.c (hpread_record_lines): New argument "offset". All |
| 1967 | callers changed. Use it to handle dynamic address relocation. |
| 1968 | (hpread_build_psymtabs): Adjust texthigh as we read each function |
| 1969 | debug symbol. Fix computation of texthigh. |
| 1970 | (hpread_read_subrange_type): Work around macro bugs in HP's |
| 1971 | compilers. |
| 1972 | (hpread_process_one_debug_symbol): Correctly map source lines. |
| 1973 | |
| 1974 | * somread.c (check_strange_names): Filter names emitted by the HP |
| 1975 | compiler when generating PIC code. |
| 1976 | |
| 1977 | * valops.c (value_struct_elt_for_reference): Work around macro |
| 1978 | bugs in HP's compilers. |
| 1979 | * c-exp.y (block): Likewise. |
| 1980 | |
| 1981 | Fri Mar 3 12:27:28 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 1982 | |
| 1983 | * rs6000-tdep.c (push_dummy_frame): Fix order of arguments to |
| 1984 | store_address. |
| 1985 | |
| 1986 | * utils.c [_AIX]: Include stddef.h instead of #defining size_t. |
| 1987 | |
| 1988 | Fri Mar 3 12:33:24 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1989 | |
| 1990 | * rs6000-tdep.c (skip_prologue): Skip multiple stores of the saved |
| 1991 | registers that GCC emits on the PowerPC by default in addition to |
| 1992 | the store multiple instruction used on the Power series. |
| 1993 | |
| 1994 | Fri Mar 3 00:54:58 1995 Doug Evans <dje@canuck.cygnus.com> |
| 1995 | |
| 1996 | * sparc-tdep.c (decode_asi): New function. |
| 1997 | (sparc_print_register_hook): Pretty print more v9 registers. |
| 1998 | * sparc/tm-sp64.h (REGISTER_NAMES): Fix some typos. |
| 1999 | |
| 2000 | Thu Mar 2 22:20:22 1995 Doug Evans <dje@canuck.cygnus.com> |
| 2001 | |
| 2002 | * dwarfread.c (struct dieinfo): Use CORE_ADDR for at_{low,high}_pc. |
| 2003 | (target_to_host): Change result type to CORE_ADDR. |
| 2004 | |
| 2005 | Thu Mar 2 15:13:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2006 | |
| 2007 | * rs6000-tdep.c: Fix byte-swapping sins. |
| 2008 | |
| 2009 | Thu Mar 2 16:48:45 1995 Michael Meissner <meissner@cygnus.com> |
| 2010 | |
| 2011 | * rs6000-tdep.c (branch_dest): Minor code cleanup, don't share |
| 2012 | code between branch unconditional and branch conditional cases. |
| 2013 | |
| 2014 | Wed Mar 1 09:41:26 1995 Doug Evans <dje@canuck.cygnus.com> |
| 2015 | |
| 2016 | Various changes for sparc64. |
| 2017 | * sparc-tdep.c (NUM_SPARC_FPREGS): Define. |
| 2018 | (SPARC_INTREG_SIZE): Define. |
| 2019 | (*): Use SPARC_INTREG_SIZE instead of REGISTER_RAW_SIZE (intreg) |
| 2020 | where appropriate. |
| 2021 | (enum branch_type): New value `done_retry'. |
| 2022 | (isbranch): Renamed from isannulled. All callers changed. |
| 2023 | Support new sparc64 branch insns. |
| 2024 | (single_step): Handle done_retry. |
| 2025 | (sparc_extract_struct_value_address): Don't assume 4 byte regs. |
| 2026 | (get_saved_register): Likewise. |
| 2027 | (sparc_push_dummy_frame): Likewise. |
| 2028 | (sparc_frame_find_saved_regs): Likewise. |
| 2029 | (sparc_pop_frame): Likewise. Don't refer to FPS_REGNUM, CPS_REGNUM, |
| 2030 | or PS_REGNUM if not sparc64. sparc64 has 64 fp regs. |
| 2031 | (sparc64_extract_struct_value_address): New function. |
| 2032 | (dump_ccreg, sparc_print_register_hook): Likewise. |
| 2033 | * sp64-tdep.c: Deleted. |
| 2034 | * sparc/tm-sp64.h (GDB_TARGET_IS_SPARC64): Define. |
| 2035 | (NUM_REGS): Reduce by 2, cle/tle are in the pstate reg. |
| 2036 | (CC_HAS_LONG_LONG): Define. |
| 2037 | (REGISTER_NAMES): Delete cle/tle and reorganize. |
| 2038 | (PS_REGNUM, FPS_REGNUM, CPS_REGNUM): Delete, they're ifdef'd out of |
| 2039 | sparc-tdep.c now. |
| 2040 | (REGISTER_BYTES): Update. |
| 2041 | (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Delete. |
| 2042 | (EXTRACT_RETURN_VALUE): Delete. Use definition in tm-sparc.h. |
| 2043 | (NO_SINGLE_STEP): Likewise. |
| 2044 | * sparc/tm-sparc.h (EXTRACT_VALUE_RETURN): Don't assume 4 byte regs. |
| 2045 | * sparc/sp64.mt: Move simulator support ... |
| 2046 | * sparc/sp64sim.mt: ... to here. |
| 2047 | |
| 2048 | Wed Mar 1 13:14:42 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 2049 | |
| 2050 | * remote-vx960.c: new file for target specific register packaging. |
| 2051 | * remote-vx68.c: ditto. |
| 2052 | * config/i960/vxworks960.mt: add remote-vx960.o. |
| 2053 | * config/m68k/vxworks68.mt: add remote-vx68.o. |
| 2054 | |
| 2055 | Wed Mar 1 13:42:49 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| 2056 | |
| 2057 | * remote.c (remote_wait): Make calls to strtol be type correct by |
| 2058 | passing the address of a char * pointer instead of an unsigned |
| 2059 | char *. |
| 2060 | |
| 2061 | * rs6000-tdep.c (push_dummy_frame): Cast sp to char * when calling |
| 2062 | write_memory to make things type correct. |
| 2063 | |
| 2064 | Wed Mar 1 12:17:31 1995 Michael Meissner <meissner@cygnus.com> |
| 2065 | |
| 2066 | * ch-exp.y, c-exp.y, f-exp.y, m2-exp.y (yy defines): Support the |
| 2067 | standard Linux yacc by adding more names to be redefined with a |
| 2068 | prefix. |
| 2069 | |
| 2070 | Tue Feb 28 22:55:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2071 | |
| 2072 | * hppa-tdep.c (pa_print_registers), monitor.c: Use |
| 2073 | extract_unsigned_integer and friends, not SWAP_TARGET_AND_HOST. |
| 2074 | * defs.h, findvar.c: Move SWAP_TARGET_AND_HOST back to findvar.c. |
| 2075 | Rename it to SWAP_FLOATING to make it clear it is no longer for |
| 2076 | integers. |
| 2077 | |
| 2078 | Tue Feb 28 14:38:39 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 2079 | |
| 2080 | * defs.h (SWAP_TARGET_AND_HOST): check endianess at runtime not |
| 2081 | compile time. |
| 2082 | |
| 2083 | start-sanitize-arc |
| 2084 | * arc-tdep.c (_initialize_arc_tdep): set tm_print_insn according to |
| 2085 | processor. |
| 2086 | * remote-arc.c (arc_wait): when a processor stops, stop other two |
| 2087 | processors too. |
| 2088 | * remote-arc.c (switch_command): switch tm_print_insn. |
| 2089 | end-sanitize-arc |
| 2090 | |
| 2091 | * vx-share/ptrace.h: merge in WRS new ptrace requests. |
| 2092 | |
| 2093 | * defs.h: fix a syntax error. |
| 2094 | |
| 2095 | * a29k-tdep.c (get_longjmp_target): add this function, from WRS. |
| 2096 | * remote-vx.c: move read_register and write_register out to |
| 2097 | target specific files. |
| 2098 | * remote-vx29k.c (get_fp_contnets): add this function, from WRS. |
| 2099 | |
| 2100 | * defs.h: define SWAP_TARGET_AND_HOST macro. |
| 2101 | * findvar.c, monitor.c, hppa-tdep.c: remove definition of |
| 2102 | SWAP_TARGET_AND_HOST. |
| 2103 | |
| 2104 | Tue Feb 28 08:31:40 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2105 | |
| 2106 | * alpha-tdep.c (find_proc_desc): Only attempt to set |
| 2107 | PROC_LOCALOFF (found_heuristic) if found_heuristic is non-NULL. |
| 2108 | |
| 2109 | Mon Feb 27 11:56:32 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 2110 | |
| 2111 | * monitor.c: General gcc -Wall lint cleanup and reformat. |
| 2112 | (monitor_command): If no args, send an empty command. |
| 2113 | |
| 2114 | Thu Feb 23 21:07:25 1995 Stu Grossman (grossman@cygnus.com) |
| 2115 | |
| 2116 | * monitor.c (monitor_load_ascii_srec): Add a one second sleep |
| 2117 | after send LOAD_CMD to prevent loss of first S-record. |
| 2118 | |
| 2119 | Tue Feb 21 20:48:42 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 2120 | |
| 2121 | * valops.c (call_function_by_hand): Set using_gcc to 2 if gcc-2. |
| 2122 | Call error if too few arguments. |
| 2123 | If REG_STRUCT_HAS_ADDR (structs passed by invisible reference), |
| 2124 | copy and convert to reference *before* we calculate alignment. |
| 2125 | Also, make sure structs allocated for return values and invisible |
| 2126 | reference don't violate STACK_ALIGN. |
| 2127 | |
| 2128 | Tue Feb 21 23:29:59 1995 Per Bothner <bothner@rtl.cygnus.com> |
| 2129 | |
| 2130 | * ch-exp.y (expression_conversion): Recognize 'ARRAY () TYPE (EXPR)' |
| 2131 | (same as C's '(TYPE[])EXPR') |
| 2132 | |
| 2133 | Tue Feb 21 11:47:26 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 2134 | |
| 2135 | * top.c (print_gdb_version): Update the year. |
| 2136 | |
| 2137 | Sun Feb 19 14:31:57 1995 Jim Kingdon <kingdon@rtl.cygnus.com> |
| 2138 | |
| 2139 | * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Look for newlib in |
| 2140 | `..' not in `../..'. |
| 2141 | |
| 2142 | Sun Feb 19 11:05:28 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 2143 | |
| 2144 | * procfs.c (unconditionally_kill_inferior): Don't issue a PIOCKILL |
| 2145 | in addition to a PIOCSSIG to kill the inferior. |
| 2146 | |
| 2147 | Thu Feb 16 15:06:12 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 2148 | |
| 2149 | * parse.c (follow_types): Given (TYPE[]) (i.e. with no length), |
| 2150 | create a 0-length array type, and set BOUND_CANNOT_BE_DETERMINED. |
| 2151 | * valops.c (value_cast): If a cast like (TYPE[])VALUE (i.e. array |
| 2152 | of unknown length) use sizeof(VALUE)/sizeof(TYPE) as the length. |
| 2153 | * c-typeprint.c (c_type_print_varspec_suffix): If array length |
| 2154 | is 0, print it, but not if upper_bound is BOUND_CANNOT_BE_DETERMINED. |
| 2155 | |
| 2156 | Thu Feb 16 16:06:50 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| 2157 | |
| 2158 | * dcache.c (insque, remque): Rewrite Linux support. |
| 2159 | |
| 2160 | Wed Feb 15 12:33:20 1995 Michael Meissner <meissner@tiktok.cygnus.com> |
| 2161 | |
| 2162 | * config/powerpc/tm-ppc-eabi.h (TEXT_SEGMENT_BASE): Define as 1. |
| 2163 | |
| 2164 | * dcache.c (insque, remque): If compiling in standard C on Linux, |
| 2165 | protect insque and remque with macros to cast the pointer |
| 2166 | arguments to the proper type. |
| 2167 | |
| 2168 | Tue Feb 14 17:16:41 1995 Stu Grossman (grossman@cygnus.com) |
| 2169 | |
| 2170 | * annotate.c, breakpoint.c, defs.h, top.c: Replace |
| 2171 | enable/disable_breakpoint_hook with modify_breakpoint_hook. |
| 2172 | start-sanitize-gdbtk |
| 2173 | * gdbtk.c: Ditto. |
| 2174 | * gdbtk.c: General cleanups, get rid of unused variables. Redo |
| 2175 | handling of stdout/stderr to just return output as the result of |
| 2176 | the tcl command that caused the output. Cleanup -Wall stuff. |
| 2177 | * (breakpoint_notify): Now returns just action and breakpoint |
| 2178 | number. |
| 2179 | * (gdb_get_breakpoint_list): New routine. Does the obvious. |
| 2180 | * (gdb_get_breakpoint_info): Mostly derived from the old |
| 2181 | breakpoint_notify, but returns lots more info. |
| 2182 | * (dsprintf_append_element): Helper routine, works like printf, |
| 2183 | but appends a tcl element onto the specified DString. Good for |
| 2184 | building up lists as return values. |
| 2185 | * (gdbtk_enable/disable_breakpoint): Go away. Replaced with |
| 2186 | gdbtk_modify_breakpoint. |
| 2187 | * (*many routines*): Use new result protocol. |
| 2188 | * (call_wrapper): Make sure that recursive calls don't trash results. |
| 2189 | * gdbtk.tcl: New windows, autocmd, and breakpoints. |
| 2190 | * (gdbtk_tcl_fputs): Don't use $current_output_win redirection |
| 2191 | anymore. It's not needed (in fact, this routine may not be needed |
| 2192 | anymore). |
| 2193 | * (gdbtk_tcl_breakpoint): Change to reflect new breakpoint |
| 2194 | notification protocol. |
| 2195 | * (gdbtk_tcl_busy gdbtk_tcl_idle): Straighten out buttons, remove |
| 2196 | catches. |
| 2197 | * (interactive_cmd): Use this wrapper around button invocations |
| 2198 | of many commands. This will catch errors and put the results into |
| 2199 | the command window. It also updates all the other windows. |
| 2200 | * Also, change reliefs of most things to sunken. This actually |
| 2201 | looks better. |
| 2202 | * (create_file_win): Fix margin binding to allow breakpoints to |
| 2203 | work again. |
| 2204 | * (create_asm_win): Use return value of gdb_disassemble instead |
| 2205 | of implicit I/O to the command window. |
| 2206 | * (create_command_window): Use new result protocol to get output |
| 2207 | from commands. |
| 2208 | end-sanitize-gdbtk |
| 2209 | |
| 2210 | Tue Feb 14 16:58:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2211 | |
| 2212 | * expression.h: Move declaration of evaluate_subexp_with_coercion |
| 2213 | from here... |
| 2214 | * value.h: ...to here. |
| 2215 | * expression.h: Don't include value.h |
| 2216 | |
| 2217 | Tue Feb 14 11:46:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2218 | |
| 2219 | * expression.h: Move include of value.h until after declaration of |
| 2220 | enum exp_opcode. |
| 2221 | |
| 2222 | Sun Feb 12 13:47:30 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 2223 | |
| 2224 | * remote-e7000.c: Comprehensive cleanup; removal of dead code, |
| 2225 | simplify code, declare things, format to standards. |
| 2226 | (inferior.h, value.h, command.h, remote-utils.h): Include. |
| 2227 | (e7000_login): Rename to e7000_login_command. |
| 2228 | (e7000_ftp): Rename to e7000_ftp_command. |
| 2229 | (e7000_drain): Rename to e7000_drain_command. |
| 2230 | |
| 2231 | * irix5-nat.c (string.h): Include near beginning of file. |
| 2232 | |
| 2233 | Sun Feb 12 12:36:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2234 | |
| 2235 | * valops.c (value_arg_coerce): Use VALUE_TYPE not SYMBOL_TYPE on |
| 2236 | arg, it is a value not a symbol. |
| 2237 | |
| 2238 | gcc -Wall lint: |
| 2239 | * eval.c: Move declaration of evaluate_subexp_with_coercion from here.. |
| 2240 | * expression.h: ..to here. |
| 2241 | * expression.h: Include value.h. |
| 2242 | * ch-lang.c (evaluate_subexp_chill): Add default case in switch. |
| 2243 | |
| 2244 | Sun Feb 12 11:03:47 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 2245 | |
| 2246 | * language.h (struct language_defn): New field evaluate_exp. |
| 2247 | * c-lang.c (c_language_defn, cplus_language_defn, asm_langauge_defn), |
| 2248 | f-lang.c (f_language_defn), language.c (unknown_language_defn, |
| 2249 | auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn): |
| 2250 | Set evaluate_exp to evaluate_subexp_standard. |
| 2251 | * ch-lang.c (evaluate_subexp_chill): New function. Chill-specific |
| 2252 | support for MULTI_SUBSCRIPT. |
| 2253 | (chill_language_defn): Set evaluate_exp to evaluate_subexp_chill. |
| 2254 | * eval.c (enum noside): Move from here .... |
| 2255 | * expression.h (enum noside): ... to here. |
| 2256 | (evaluate_subexp_standard): New prototype. |
| 2257 | * eval.c (evaluate_subexp): Renamed to evaluate_subexp_standard. |
| 2258 | Removed lo-longer-needed test for chill_varying_type. |
| 2259 | (evaluate_subexp): New. Calls exp->language_defn->evaluate_exp. |
| 2260 | |
| 2261 | * ch-exp.y (maybe_expression_list): New non-terminal. |
| 2262 | (primitive_value): Allow empty parameter list. |
| 2263 | |
| 2264 | Sun Feb 12 10:02:16 1995 Per Bothner <bothner@cygnus.com> |
| 2265 | |
| 2266 | * buildsym.c (finish_block): If finishing a function without known |
| 2267 | parameter type info, set that from parameter symbols. |
| 2268 | * c-typeprint.c (c_type_print_varspec_suffix): For TYPE_CODE_FUNC, |
| 2269 | print parameter types, if available. |
| 2270 | * ch-typeprint.c (chill_type_print_base): Likewise. |
| 2271 | |
| 2272 | * gdbtypes.h (struct type): Remove function type field. |
| 2273 | (TYPE_FUNCTION_TYPE): Remove macro. We can't as simply re-use |
| 2274 | function types now that we're also storing parameter types. |
| 2275 | And the payoff is much less. |
| 2276 | * gdbtypes.c (make_function_type): Don't use/set TYPE_FUNCTION_TYPE. |
| 2277 | (recursive_dump_type): Don't print TYPE_FUNCTION_TYPE. |
| 2278 | * dwarfread.c (read_subroutine_type): Don't set TYPE_FUNCTION_TYPE. |
| 2279 | |
| 2280 | * valops.c (value_arg_coerce): Now takes param_type argument. |
| 2281 | (call_function_by_hand): Convert arguments with value_arg_coerce |
| 2282 | early, and overwrite original args with converted args. |
| 2283 | No longer need multiple calls to value_arg_coerce. |
| 2284 | (value_arg_push): Removed. |
| 2285 | * hppa-tdep.c (hppa_push_arguments): No longer call value_arg_coerce. |
| 2286 | * mips-tdep.c (mips_push_arguments): Likewise. |
| 2287 | * alpha-tdep.c (alpha_push_arguments): Likewise. |
| 2288 | * rs6000-tdep.c (push_arguments, ran_out_of_registers_for_arguments): |
| 2289 | Likewise. |
| 2290 | * value.h (value_arg_coerce): Remove declaration. (It's now static.) |
| 2291 | |
| 2292 | * valops.c (value_cast): Do COERCE_VARYING_ARRAY after COERCE_REF. |
| 2293 | |
| 2294 | * symtab.c (add_param_to_type): Remove (commented-out) function, |
| 2295 | since that functionality has been re-written. |
| 2296 | * coffread.c: Remove commented-out add_param_to_type support. |
| 2297 | * mdebugread.c (parse_symbol): Likewise. |
| 2298 | * stabsread.c (define_symbol): Likewise. |
| 2299 | |
| 2300 | Sun Feb 12 09:03:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2301 | |
| 2302 | * buildsym.c (start_subfile): Set language for f2c like for cfront. |
| 2303 | |
| 2304 | Thu Feb 9 20:20:11 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| 2305 | |
| 2306 | * op50n-rom.c: Add the control registers. |
| 2307 | |
| 2308 | Thu Feb 9 15:46:39 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 2309 | |
| 2310 | * Makefile.in (CLIBS): Add $(LIBIBERTY) before, in addition to |
| 2311 | after, any host/target/native libraries. |
| 2312 | * dcache.c (insque, remque): Remove declarations. |
| 2313 | * gdbtypes.h (type_code): Remove trailing comma. |
| 2314 | |
| 2315 | From Peter Schauer: |
| 2316 | * xcoffread.c (read_xcoff_symtab) [C_HIDEXT]: Move #ifdef |
| 2317 | STATIC_NODEBUG_VARS inside case. |
| 2318 | |
| 2319 | Thu Feb 9 07:43:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 2320 | |
| 2321 | * config/sparc/tm-sun4sol2.h: Define STATIC_TRANSFORM_NAME. |
| 2322 | * partial-stab.h: Call it. |
| 2323 | * stabsread.c (define_symbol) [STATIC_TRANSFORM_NAME]: Call |
| 2324 | STATIC_TRANSFORM_NAME to get the name and use minimal symbols to |
| 2325 | get the address. |
| 2326 | * sparc-tdep.c (solaris_static_transform_name): New function. |
| 2327 | |
| 2328 | Thu Feb 9 12:09:09 1995 Jeff Law (law@snake.cs.utah.edu) |
| 2329 | |
| 2330 | * somread.c (som_symtab_read): Handle dynamic relocation for both |
| 2331 | text and data symbols. |
| 2332 | (som_symfile_offsets): If objfile is a shared library, then get |
| 2333 | text and data offsets from the shared library structures. |
| 2334 | * somsolib.c (som_solib_add): Copy the bfd pointer from the |
| 2335 | objfile rather than reopening the file again. |
| 2336 | (som_solib_section_offsets): New function. |
| 2337 | * somsolib.h (som_solib_section_offsets): Declare. |
| 2338 | |
| 2339 | Wed Feb 8 20:32:18 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 2340 | |
| 2341 | * config/sparc/tm-sun4sol2.h, dbxread.c: Rename |
| 2342 | N_SO_ADDRESS_MAYBE_MISSING to SOFUN_ADDRESS_MAYBE_MISSING. |
| 2343 | * symtab.h (minimal_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: Add |
| 2344 | filename field. |
| 2345 | * elfread.c (record_minimal_symbol_and_info), |
| 2346 | minsyms.c, symtab.h (prim_record_minimal_symbol_and_info): Return |
| 2347 | newly created symbol. |
| 2348 | * elfread.c (elf_symtab_read) [SOFUN_ADDRESS_MAYBE_MISSING]: |
| 2349 | Set filename field of minimal symbol. |
| 2350 | * symmisc.c (dump_msymbols) [SOFUN_ADDRESS_MAYBE_MISSING]: |
| 2351 | Print filename field. |
| 2352 | * minsyms.c, symtab.h (lookup_minimal_symbol): New arg sfile. |
| 2353 | * symm-tdep.c, somsolib.c, hppa-tdep.c, c-exp.y, f-exp.y, |
| 2354 | m2-exp.y, nindy-tdep.c, m3-nat.c, irix5-nat.c, hpread.c, |
| 2355 | os9kread.c, breakpoint.c, alpha-tdep.c, valops.c, symtab.c, |
| 2356 | printcmd.c, dbxread.c: Change callers to pass NULL for sfile. |
| 2357 | * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: |
| 2358 | Find address of function from minimal symbols. |
| 2359 | * partial-stab.h, case 'f', 'F': Call find_stab_function_addr |
| 2360 | instead of getting pst->textlow from the stab. |
| 2361 | * minsyms.c (find_stab_function_addr): New function. |
| 2362 | |
| 2363 | Wed Feb 8 19:19:56 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| 2364 | |
| 2365 | * monitor.c: Fix so all the output shows up in the GUI command |
| 2366 | window. |
| 2367 | |
| 2368 | Mon Feb 6 18:50:59 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 2369 | |
| 2370 | * i386-tdep.c (_initialize_i386_tdep): Put void decl on separate |
| 2371 | line, so init.c generation works correctly. |
| 2372 | start-sanitize-arc |
| 2373 | * arc-tdep.c (_initialize_arc_tdep): Ditto. |
| 2374 | end-sanitize-arc |
| 2375 | |
| 2376 | Mon Feb 6 14:44:36 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| 2377 | |
| 2378 | * config/mips/idt.mt: Add support for the lsi33k target. |
| 2379 | * config/sparc/sun4sol2.mh: Add support for ser-tcp. |
| 2380 | * array-rom.c: Finish the rest of the support commands needed by |
| 2381 | GDB. |
| 2382 | * mips-tdep.c: Add LSI33k register names and processor type. |
| 2383 | |
| 2384 | start-sanitize-gdbtk |
| 2385 | Sun Feb 5 20:32:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2386 | |
| 2387 | * gdbtk.c (gdb_disassemble): Deference pointer to function before |
| 2388 | calling it (pre-ANSI compilers generally require this). |
| 2389 | |
| 2390 | end-sanitize-gdbtk |
| 2391 | Sat Feb 4 13:29:52 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 2392 | |
| 2393 | * config/m68k/est.mt (TDEPFILES): Remove m68k-pinsn.o. |
| 2394 | |
| 2395 | Fri Feb 3 16:47:31 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 2396 | |
| 2397 | * ser-go32-para.c (dos_read): fix syntax errors. |
| 2398 | |
| 2399 | Fri Feb 3 11:19:20 1995 Stu Grossman (grossman@cygnus.com) |
| 2400 | |
| 2401 | * core.c (dis_asm_read_memory), defs.h, top.c: Get rid of |
| 2402 | dis_asm_read_memory_hook. We can now call the disassemblers |
| 2403 | directly and have no need for this hook anymore. |
| 2404 | start-sanitize-gdbtk |
| 2405 | * gdbtk.c (gdb_disassemble): Ditto. |
| 2406 | end-sanitize-gdbtk |
| 2407 | * defs.h, printcmd.c: Make print_insn be static. |
| 2408 | |
| 2409 | * ser-go32.c (dos_comisr): Make this 8 bit clean. |
| 2410 | * (dos_open dos_close): Allow multiple opens to the same device. |
| 2411 | Use a ref count to prevent unwanted deallocations. |
| 2412 | * sparcl-tdep.c: Put #ifdefs around all socket stuff to make GO32 |
| 2413 | happy. |
| 2414 | * (sparclite_ops): Switch to download_stratum. |
| 2415 | * target.h (enum strata): Move download_stratum before |
| 2416 | process_stratum so that executable targets get pushed on top of |
| 2417 | download targets. |
| 2418 | |
| 2419 | Thu Feb 2 19:02:45 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| 2420 | |
| 2421 | * array-rom.c: Remove the non GDB remote protocol config stuff. |
| 2422 | |
| 2423 | * monitor.c: All reading/writing functions for memory and |
| 2424 | registers work. |
| 2425 | |
| 2426 | Thu Feb 2 16:11:04 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 2427 | |
| 2428 | start-sanitize-arc |
| 2429 | * config/arc/arc.mt: new target makefile for arc processor. |
| 2430 | * config/arc/tm-arc.h: new target header for arc processor. |
| 2431 | * config/arc/go32.mh: new go32 host makefile for arc processor. |
| 2432 | * config/arc/xm-go32.h: new go32 host header for arc processor. |
| 2433 | * arc-tdep.c: new target dependent codes for arc processor. |
| 2434 | * remote-arc.c: new file for arc-specific protocol through |
| 2435 | parallel line. |
| 2436 | end-sanitize-arc |
| 2437 | * ser-go32-para.c: new file for go32 parallel port communication. |
| 2438 | |
| 2439 | Thu Feb 2 13:58:40 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 2440 | |
| 2441 | * Makefile.in (VERSION): Bump to 4.13.2. |
| 2442 | |
| 2443 | Thu Feb 2 07:27:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2444 | |
| 2445 | Fix compiler warnings: |
| 2446 | * remote-e7000.c (printf_e7000debug): Rename to puts_e7000debug |
| 2447 | and have the caller do the sprintf. Saves us from varargs hell. |
| 2448 | (normal): Define before use. |
| 2449 | * remote-e7000.c: Reindent a few things. |
| 2450 | |
| 2451 | Wed Feb 1 21:16:42 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 2452 | |
| 2453 | * f-typeprint.c (f_type_print_varspec_suffix): Print array index |
| 2454 | ranges in reverse order. |
| 2455 | * f-valprint.c (f77_create_arrayprint_offset_tbl): Fix calculation. |
| 2456 | |
| 2457 | * eval.c (evaluate_subscript): Don't call value_subscript, since |
| 2458 | it adjusts for lower bound and enforces ranges. |
| 2459 | |
| 2460 | * expression.h (exp_code): Remove MULTI_F77_SUBSCRIPT, OP_F77_SUBSTR. |
| 2461 | * eval.c, parse.c: Removed uses of removed opcodes. |
| 2462 | * eval.c (evaluate_subexp): Clean up handling of |
| 2463 | OP_UNDETERMINED_ARGLIST (no backtracking, more general). |
| 2464 | |
| 2465 | * f-valprint.c (f_val_print): Print TYPE_CODE_STRING using |
| 2466 | LA_PRINT_STRING, and not val_print_string (which reads from inferior). |
| 2467 | |
| 2468 | * ch-lang.c (chill_is_varying_struct), ch-lang.h: Remve function |
| 2469 | duplicate function made redundant by chill_varying_type. |
| 2470 | |
| 2471 | Re-write of f77 string and complex number support: |
| 2472 | |
| 2473 | * language.h (struct language_defn): New fields string_lower_bound |
| 2474 | and string_char_type. |
| 2475 | * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn), |
| 2476 | language.c (unknown_language_defn, auto_language_defn, |
| 2477 | local_language_defn), m2-lang.c (m2_language_defn), f-lang.c |
| 2478 | (f_language_defn), ch-lang.c (chill_language_defn): Set new fields. |
| 2479 | * gdbtypes.c (create_string_type): Use new string_char_type field. |
| 2480 | * valops.c (value_string): Use new string_lower_bound field. |
| 2481 | |
| 2482 | * defs.h (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT): Removed. |
| 2483 | * f-lang.c (f_create_fundamental_type, _initialize_f_language), |
| 2484 | m2-lang.c (m2_create_fundamental_type), |
| 2485 | gdbtypes.c (_initialize_gdbtypes): Set TYPE_TARGET_TYPE of complex |
| 2486 | types. Set their TYPE_CODEs to TYPE_CODE_COMPLEX. |
| 2487 | * mdebugread.c (mdebug_type_complex, mdebug_type_double_complex): |
| 2488 | Removed. Use builtin_type_complex and builtin_type_double_complex. |
| 2489 | |
| 2490 | * gdbtypes.h (enum type_code): Removed TYPE_CODE_LITERAL_STRING |
| 2491 | and TYPE_CODE_LITERAL_COMPLEX. |
| 2492 | * c-typeprint.c, f-typeprint.c, f-valprint.c, eval.c: Removed uses of |
| 2493 | TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX. |
| 2494 | * gdbtypes.c, gdbtypes.h (f77_create_literal_complex_type, |
| 2495 | f77_create_literal_string_type): Removed. |
| 2496 | * value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_MEMADDR, |
| 2497 | VALUE_SUBSTRING_MYADDR): Removed. |
| 2498 | |
| 2499 | * expression.h (enum exp_opcode): Rename OP_F77_LITERAL_COMPLEX to |
| 2500 | OP_COMPLEX. |
| 2501 | * parse.c: Update accordingly. |
| 2502 | |
| 2503 | * f-valprint.c (f77_print_cmplx): Removed. |
| 2504 | (f_val_print case TYPE_CODE_COMPLEX): Re-write to use print_floating. |
| 2505 | |
| 2506 | * f-exp.y (STRING_LITERAL): Use OP_STRING instead of OP_ARRAY. |
| 2507 | * eval.c (evaluate_subexp): For case OP_ARRAY, don't call |
| 2508 | f77_value_literal_string. |
| 2509 | * valops.c, value.h (f77_value_literal_string, f77_value_substring, |
| 2510 | f77_assign_from_literal_string, f77_assign_from_literal_complex): |
| 2511 | Removed. |
| 2512 | (value_assign): No longer need to handle literal types. |
| 2513 | * valops.c (f77_value_literal_complex), value.h: Re-written and |
| 2514 | renamed to value_literal_complex. Last arg is now a (complex) type. |
| 2515 | * valops.c (f77_cast_into_complex): Re-written and renamed to |
| 2516 | cast_into_complex. |
| 2517 | * eval.c (evaluate_subexp): Update accordingly. |
| 2518 | |
| 2519 | * ch-valprint.c (chill_val_print): On TYPE_CODE_STRING, don't |
| 2520 | print address for non-'s'-formats. |
| 2521 | * ch-typeprint.c, ch-valprint.c: Use chill_varying_type instead |
| 2522 | of chill_is_varying_struct. |
| 2523 | |
| 2524 | Wed Feb 1 13:27:33 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 2525 | |
| 2526 | gcc -Wall lint. |
| 2527 | * alpha-tdep.c (alpha_in_lenient_prologue): Comment out. |
| 2528 | (after_prologue): Remove unused local b. |
| 2529 | * procfs.c (thread.h): Include. |
| 2530 | (pr_flag_table, pr_why_table, faults_table, siginfo_table): Use |
| 2531 | nested braces in initializer. |
| 2532 | * top.c (initialize_targets, initialize_utils): Declare. |
| 2533 | (locate_arg, insert_args): Add parens around tested assignments. |
| 2534 | * remote-utils.c (sr_scan_args): Remove decl of strtol. |
| 2535 | * remote.c (thread.h): Include. |
| 2536 | (remote_wait): Remove unused local p2. |
| 2537 | * sparc-tdep.c (fill_gregset, fill_fpregset): Remove decls of |
| 2538 | registers array. |
| 2539 | |
| 2540 | defs.h (stdlib.h): Include. |
| 2541 | (exit, perror, atoi, qsort, memcpy, memcmp): Don't declare. |
| 2542 | (fclose, atof, malloc, realloc, free, strchr, strrchr, strstr, |
| 2543 | strtok, strerror): Don't specify parameter types in declaration. |
| 2544 | |
| 2545 | Wed Feb 1 12:23:57 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 2546 | |
| 2547 | * ch-exp.y (value_string_element, string_primitive_value, |
| 2548 | start_element, left_element, right_element, slice_size, |
| 2549 | lower_element, upper_element, first_element): Removed. |
| 2550 | (value_string_slice, value_array_slice): Replaced by ... |
| 2551 | (slice): New non-terminal, with working slice support. |
| 2552 | (primitive_value_lparen, rparen): New non-terminals. |
| 2553 | (maybe_tuple_elements): New non-terminal, to allow empty tuples. |
| 2554 | (idtokentab): Added "up". |
| 2555 | |
| 2556 | * value.h (COERCE_VARYING_ARRAY): New macro. |
| 2557 | * valarith.c (value_subscript): Use it. |
| 2558 | * valops.c (value_cast): Likewise. Also, do nothing if already |
| 2559 | correct type, and allow converting from/to range to/from scalar. |
| 2560 | |
| 2561 | * valops.c, value.h (varying_to_slice, value_slice): New functions. |
| 2562 | * eval.c (OP_ARRAY): Add cast for array element. |
| 2563 | * expression.h (TERNOP_SLICE, TERNOP_SLICE_COUNT): New exp_opcodes. |
| 2564 | * valops.c (chill_varying_type): Moved function frp, here ... |
| 2565 | * gdbtypes.c (chill_varying_type), gdbtypes.h: ... to here. |
| 2566 | * parse.c (length_of_subexp, prefixify_subexp): Add support |
| 2567 | for TERNOP_SLICE, TERNOP_SLICE_COUNT. |
| 2568 | * expprint.c (print_subexp, dump_expression): Likewise. |
| 2569 | * eval.c (evaluate_subexp): Likewise. |
| 2570 | |
| 2571 | * eval.c (evaluate_subexp case MULTI_SUBSCRIPT): Don't call |
| 2572 | value_x_binop on a Chill varying string. |
| 2573 | |
| 2574 | Tue Jan 31 13:51:53 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2575 | |
| 2576 | * config/m68k/monitor.mt, |
| 2577 | config/pa/{hppabsd.mt,hppahpux.mt,hppaosf.mt,hppapro.mt}: Put |
| 2578 | depfiles in TDEPFILES not REMOTE_O. |
| 2579 | |
| 2580 | Tue Jan 31 11:14:44 1995 Steve Chamberlain <sac@splat> |
| 2581 | |
| 2582 | From nigel@algor.co.uk. |
| 2583 | * ser-go32.c (dos_close): Don't crash if scb null. |
| 2584 | (dos_sendbreak): New function. |
| 2585 | (dos_ops): Point to dos_sendbreak. |
| 2586 | (dos_info): Calculate COM number correctly. |
| 2587 | |
| 2588 | Tue Jan 31 09:40:11 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2589 | |
| 2590 | * xcoffread.c (process_xcoff_symbol): Use new variables |
| 2591 | func_symbol_type and var_symbol_type as type of functions and |
| 2592 | variables which don't have any stabs associated with them. |
| 2593 | Reindent most of function. |
| 2594 | (_initialize_xcoffread): Initialize *_symbol_type. |
| 2595 | |
| 2596 | * xcoffread.c (read_xcoff_symtab): Reindent most of function. |
| 2597 | Put C_HIDEXT symbols in the minimal symbols, rather than ignoring |
| 2598 | them (this part commented out as I didn't quite get it to work). |
| 2599 | (cs_to_section, find_targ_sec): New functions, to support above code. |
| 2600 | * xcoffread.c (RECORD_MINIMAL_SYMBOL): Only skip '.' if it is |
| 2601 | actually present. |
| 2602 | |
| 2603 | Mon Jan 30 17:34:24 1995 Stu Grossman (grossman@cygnus.com) |
| 2604 | start-sanitize-gdbtk |
| 2605 | * gdbtk.tcl (create_file_win): Disable old popup menu for source |
| 2606 | window. |
| 2607 | end-sanitize-gdbtk |
| 2608 | * sparcl-tdep.c: Add `sparclite' target for doing serial and udp |
| 2609 | downloads to SPARClite demo boards. |
| 2610 | |
| 2611 | Sun Jan 29 09:43:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2612 | |
| 2613 | * remote.c, remote-pa.c: Remove #if 0'd icache code. It has had |
| 2614 | no hope of working as is for a long time (in particular, shebs' 27 |
| 2615 | Jan 95 change confuses the issue further--target_read_memory and |
| 2616 | xfer_core_file do *not* do the same thing in this context). |
| 2617 | Revise comment. |
| 2618 | |
| 2619 | Sat Jan 28 13:40:46 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 2620 | |
| 2621 | * elfread.c (elf_symtab_read): Do not test BSF_GLOBAL for |
| 2622 | procedure linkage table symbols, it is no longer set due to the |
| 2623 | Jan 6 BFD change in bfd/elfcode.h. |
| 2624 | |
| 2625 | Fri Jan 27 17:08:06 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 2626 | |
| 2627 | * top.c (use_windows): Clarify comments. |
| 2628 | |
| 2629 | * convex-tdep.c (xfer_core_file): Comment out. |
| 2630 | * config/convex/tm-convex.h (XFER_CORE_FILE): Remove. |
| 2631 | * remote.c, remote-pa.c (remote_fetch_word): Change xfer_core_file |
| 2632 | references to target_read_memory. |
| 2633 | * gdbcore.h (xfer_core_file, core_open, core_detach): Remove |
| 2634 | declarations. |
| 2635 | * corelow.c (core_open, core_detach): Make static. |
| 2636 | |
| 2637 | * arm-tdep.c: Make it compile. |
| 2638 | (exec_file_command, xfer_core_file): Comment out. |
| 2639 | (arm_print_insn): Remove, now in libopcodes. |
| 2640 | (skip_prologue): Comment out most of body. |
| 2641 | (arm_frame_find_saved_regs): Move here from tm-arm.h. |
| 2642 | (_initialize_arm_tdep): Set tm_print_insn. |
| 2643 | * config/arm/tm-arm.h: Remove old refs to first_object_file_end. |
| 2644 | (XFER_CORE_FILE): Remove. |
| 2645 | (FRAME_FIND_SAVED_REGS): Call arm_frame_find_saved_regs. |
| 2646 | |
| 2647 | Fri Jan 27 08:48:28 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2648 | |
| 2649 | * Makefile.in (CHILL_LIB): Define as in testsuite/Makefile.in. |
| 2650 | |
| 2651 | Thu Jan 26 18:24:41 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 2652 | |
| 2653 | * symtab.c (find_pc_line): When subtracting one to get a line |
| 2654 | number, make sure not to end up with zero. |
| 2655 | |
| 2656 | * remote-vx.c: Revert all of Kung's changes of 16 Jan. The |
| 2657 | problems with those changes were (a) the file didn't compile, (b) |
| 2658 | they changed memset to bzero--memset is correct, (c) they took out |
| 2659 | code to deal with boards lacking floating point, (d) who knows |
| 2660 | what I didn't discover in a quick read. |
| 2661 | |
| 2662 | Thu Jan 26 17:32:54 1995 Stu Grossman (grossman@cygnus.com) |
| 2663 | |
| 2664 | * sparcl-tdep.c: Clean up formatting and indentation. |
| 2665 | |
| 2666 | Thu Jan 26 10:49:59 1995 Steve Chamberlain <sac@splat> |
| 2667 | |
| 2668 | * remote-hms.c (hms_ops): Change ref of hr_load_image |
| 2669 | to gr_load_image. |
| 2670 | (dcache_flush, dcache_hit, dcache_value, dcache_fetch, |
| 2671 | dcache_poke, dcache_init): Deleted. |
| 2672 | (hms_open, hms_resume, hms_fetch_word, hms_store_word): |
| 2673 | Use dcache routines provided by remote-util.h |
| 2674 | |
| 2675 | Thu Jan 26 12:08:31 1995 Michael Meissner <meissner@cygnus.com> |
| 2676 | |
| 2677 | * configure.in: Add support for powerpc-*-eabi. |
| 2678 | |
| 2679 | * powerpc/tm-ppc-eabi.h, powerpc/pcc-eabi.mt: New files for |
| 2680 | PowerPC support. |
| 2681 | |
| 2682 | Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 2683 | |
| 2684 | * language.h (struct language_defn): New field c_style_arrays. |
| 2685 | * language.c (unknown_language_defn, auto_language_defn, |
| 2686 | local_language_defn), c-lang.c (c_language_defn, cplus_language_defn, |
| 2687 | asm_language_defn): Set c_style_arrays to true. |
| 2688 | * m2-lang.c (m2_language_defn), ch-lang.c (chill_language_defn), |
| 2689 | f-lang.c (f_language_defn): Set c_style_arrays to false. |
| 2690 | * valops.c (value_string): If c_style_array is not set, |
| 2691 | allocate string in gdb (not inferior) using allocate_value. |
| 2692 | |
| 2693 | * value.h (COERCE_ARRAY), valops.c (value_addr, value_arg_coerce): |
| 2694 | Only call value_coerce_array if current_language->c_style_arrays. |
| 2695 | * values.c: Add #include "language.h". (Needed for COERCE_ARRAY.) |
| 2696 | |
| 2697 | * valops.c (chill_varying_type): New predicate. |
| 2698 | * valops.c (value_cast): Support assigning a fixed string or array |
| 2699 | to a variable string/array structure. |
| 2700 | |
| 2701 | * valarith.c (value_subscripted_rvalue): Extra parameter lowerbound. |
| 2702 | Check index>=lowerbound, and then add lowerbound to index here, |
| 2703 | instead of in caller. Generalize to arbitrary lval_types. |
| 2704 | (value_subscript): Use enhanced value_subscripted_rvalue if |
| 2705 | c_style_arrays is false (and index is in range). |
| 2706 | |
| 2707 | start-sanitize-gdbtk |
| 2708 | Wed Jan 25 18:23:46 1995 Stu Grossman (grossman@cygnus.com) |
| 2709 | |
| 2710 | * gdbtk.c (gdbtk_init): Prevent segfault when gdbtk.tcl can't be |
| 2711 | found. |
| 2712 | * gdbtk.tcl: Initialize expr_update_list() to prevent errors when |
| 2713 | popping up expression window for the first time. |
| 2714 | end-sanitize-gdbtk |
| 2715 | |
| 2716 | Wed Jan 25 18:13:14 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 2717 | |
| 2718 | * eval.c (evaluate_subexp case OP_ARRAY): Fix calls to memset: |
| 2719 | TYPE_LENGTH is length in bytes, not bits. |
| 2720 | |
| 2721 | Wed Jan 25 08:19:35 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2722 | |
| 2723 | * infrun.c (proceed): Flush stdout before resuming inferior. |
| 2724 | * infcmd.c (step_1), annotate.c (annotate_starting): |
| 2725 | Don't bother to flush here. |
| 2726 | |
| 2727 | Wed Jan 25 01:11:21 1995 Jeff Law (law@snake.cs.utah.edu) |
| 2728 | |
| 2729 | * hpread.c (hpread_process_one_debug_symbol): Fix lines garbled |
| 2730 | by an ill-advised global search and replace. |
| 2731 | |
| 2732 | Tue Jan 24 12:10:28 1995 Stu Grossman (grossman@cygnus.com) |
| 2733 | |
| 2734 | * gdbtk.tcl (create_registers_window): Work around a radiobutton |
| 2735 | widget bug to make Options|Natural button work. |
| 2736 | |
| 2737 | * gdbtk.c (gdb_disassemble): Fix problem with source+assembly and |
| 2738 | g++ caused by out-of-order pc's. |
| 2739 | * gdbtk.tcl (files_command): Remove duplicate file names. Also, |
| 2740 | add scrollbar. |
| 2741 | |
| 2742 | Mon Jan 23 17:21:09 1995 Stu Grossman (grossman@cygnus.com) |
| 2743 | |
| 2744 | * gdbtk.tcl: Take .gdbtkinit if it exists. Makes gdbtk match the |
| 2745 | doc! |
| 2746 | |
| 2747 | Mon Jan 23 13:11:46 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 2748 | |
| 2749 | Add support for Chill bitstring literals (e.h. H'FF00'). |
| 2750 | * ch-exp.y (match_bitstring_literal): Fix for proper endianness. |
| 2751 | * expprint.c (print_subexp): Don't call error on OP_BITSTRING, |
| 2752 | just print B'<unimlemented>'. |
| 2753 | * gdbtypes.c (create_set_type): Fix bug in length calculation. |
| 2754 | * valops.c, value.h (value_bitstring): New function. |
| 2755 | * eval.c (evaluate_subexp): Implement support for OP_BITSTRING. |
| 2756 | |
| 2757 | * ch-typeprint.c (chill_type_print_base): For TYPE_CODE_FUNC, |
| 2758 | check that return type is non-void, and print in proper Chill syntax. |
| 2759 | |
| 2760 | Mon Jan 23 12:20:34 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| 2761 | |
| 2762 | * Makefile.in: Remove references to remote-mon.c. |
| 2763 | * remote-mon.c: remove. Replaced by rom68k-rom.c. |
| 2764 | * rom68k-rom.c: Support for Rom68k monitor. |
| 2765 | |
| 2766 | Mon Jan 23 10:50:57 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 2767 | |
| 2768 | * Makefile.in (CHILL_FOR_TARGET): Update -L argument to point to |
| 2769 | gcc/ch/runtime not chillrt, since that is where the chill runtime |
| 2770 | lives now. |
| 2771 | |
| 2772 | Mon Jan 23 00:06:57 1995 Steve Chamberlain <sac@splat> |
| 2773 | |
| 2774 | * remote-hms.c (hms_load): Delete. |
| 2775 | (target_ops): Use hr_load_image. |
| 2776 | |
| 2777 | * remote-e7000.c, remote-z8k.c, remote-nindy.c (target_ops): |
| 2778 | Define memory_insert/remove_breakpoint. |
| 2779 | * xm-go32.h: Remove redundant SIGs. |
| 2780 | |
| 2781 | Thu Jan 19 20:26:58 1995 Steve Chamberlain <sac@splat> |
| 2782 | |
| 2783 | * ser-go32.c: Rewritten by nigel@algor.co.uk. |
| 2784 | |
| 2785 | Fri Jan 20 15:23:55 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 2786 | |
| 2787 | * expression.h (OP_LABELED): New operator, for Chill |
| 2788 | labeled structre tuples. |
| 2789 | * ch-exp.y (tuple_element, named_record_element, tuple_elements): |
| 2790 | New non-terminals, to handle labeled structure tuples. |
| 2791 | (tuple): Re-define using tuple_elements. |
| 2792 | * eval.c (evaluate_labeled_field_init): New function, to handle |
| 2793 | initialization of structure fields, possibly using OP_LABELED. |
| 2794 | (evaluate_subexp): Use it. |
| 2795 | * expprint.c (print_subexp case): For OP_ARRAY, use Chill syntax |
| 2796 | for Chill. Handled OP_LABELED. |
| 2797 | * parse.c (length_of_subexp, prefixify_subexp): Handle OP_LABELED. |
| 2798 | |
| 2799 | * eval.c (evaluate_subexp): Handle Chill Powerset tuples. |
| 2800 | * valarith.c (value_bit_index): Just treat bitstring as represented |
| 2801 | by an array of bytes. Alignment is handled by compiler. |
| 2802 | |
| 2803 | Wed Jan 18 19:00:29 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 2804 | |
| 2805 | * h8300-tdep.c (gdb_print_insn_h8300): Fix typo (&info -> info). |
| 2806 | * sh-tdep.c (gdb_print_insn_sh): Ditto. |
| 2807 | |
| 2808 | Wed Jan 18 11:25:43 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 2809 | |
| 2810 | * remote-os9k.c (rombug_open): Fix a bug in exception handling |
| 2811 | command. |
| 2812 | * remote-os9k.c (rombug_write_inferior_memory): reset buffer after |
| 2813 | write. |
| 2814 | |
| 2815 | Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com> |
| 2816 | |
| 2817 | * parse.c (_initialize_parse): Improve wording of names of |
| 2818 | msym_*_symbol_type. |
| 2819 | |
| 2820 | Tue Jan 17 14:00:58 1995 Ian Lance Taylor <ian@sanguine.cygnus.com> |
| 2821 | |
| 2822 | * config/mips/tm-mips.h (enum mips_fpu_type): New enum. |
| 2823 | (mips_fpu): Change type to enum mips_fpu_type. |
| 2824 | (FIX_CALL_DUMMY): Handle mips_fpu == MIPS_FPU_SINGLE. |
| 2825 | * mips-tdep.c (mips_fpu): Change type to enum mips_fpu_type. |
| 2826 | Don't initialize. |
| 2827 | (mips_fpu_string): New static variable. |
| 2828 | (mips_push_dummy_frame): Handle mips_fpu == MIPS_FPU_SINGLE. |
| 2829 | (mips_pop_frame): Likewise. |
| 2830 | (mips_extract_return_value): Likewise. |
| 2831 | (mips_store_return_value): Likewise. |
| 2832 | (mips_set_fpu_command): New static function. |
| 2833 | (mips_show_fpu_command): New static function. |
| 2834 | (_initialize_mips_tdep): Change handling of set/show mipsfpu. |
| 2835 | |
| 2836 | Tue Jan 17 09:48:38 1995 Jim Kingdon <kingdon@lioth.cygnus.com> |
| 2837 | |
| 2838 | * a29k-tdep.c (gdb_print_insn_a29k): Fix typo (&info -> info). |
| 2839 | |
| 2840 | * parse.c (write_exp_msymbol): Use new variables |
| 2841 | msym_*_symbol_type as type of msymbol expression. |
| 2842 | (_initialize_parse): Initialize them. |
| 2843 | |
| 2844 | Mon Jan 16 18:11:03 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 2845 | |
| 2846 | General cleanup and simplication of disassembler interface. |
| 2847 | * a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c, |
| 2848 | hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c, |
| 2849 | m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c, |
| 2850 | rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove. |
| 2851 | * gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files, |
| 2852 | had been -pinsn.c files. |
| 2853 | * Makefile.in (ALLDEPFILES): Remove removed files. |
| 2854 | (a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o, |
| 2855 | hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o, |
| 2856 | m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o, |
| 2857 | rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o): |
| 2858 | Remove compile actions. |
| 2859 | * arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o, |
| 2860 | vax-tdep.o: Add compile actions. |
| 2861 | * defs.h (tm_print_insn): New global. |
| 2862 | * a29k-tdep.c (gdb_print_insn_a29k): New function. |
| 2863 | (_initialize_a29k_tdep): Rename from _initialize_29k, |
| 2864 | set tm_print_insn. |
| 2865 | * alpha-tdep.c (print_insn): Remove. |
| 2866 | (_initialize_alpha_tdep): Set tm_print_insn. |
| 2867 | * arm-tdep.c (arm_print_insn): New function, was print_insn |
| 2868 | in arm-pinsn.c. |
| 2869 | * convex-tdep.c (convex_print_insn): New function, was print_insn |
| 2870 | in convex-pinsn.c. |
| 2871 | * h8300-tdep.c (print_insn): Remove. |
| 2872 | (gdb_print_insn_h8300): New function. |
| 2873 | (_initialize_h8300_tdep): New function. |
| 2874 | * h8500-tdep.c (print_insn): Remove. |
| 2875 | (_initialize_h8500_tdep): New function. |
| 2876 | * hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn. |
| 2877 | * i386-tdep.c (_initialize_i386_tdep): New function. |
| 2878 | * i960-tdep.c (mem, next_insn): New functions, were in |
| 2879 | i960-pinsn.c. |
| 2880 | (_initialize_i960_tdep): Set tm_print_insn. |
| 2881 | * m68k-tdep.c (_initialize_m68k_tdep): New function. |
| 2882 | * m88k-tdep.c (_initialize_m88k_tdep): New function. |
| 2883 | * mips-tdep.c (gdb_print_insn_mips): New function. |
| 2884 | (_initialize_mips_tdep): Set tm_print_insn. |
| 2885 | * pyr-tdep.c (pyr_print_insn): New function, was print_insn |
| 2886 | in pyr-pinsn.c. |
| 2887 | * rs6000-tdep.c (_initialize_rs6000_tdep): New function. |
| 2888 | * sh-tdep.c (print_insn): Remove. |
| 2889 | (gdb_print_insn_sh): New function. |
| 2890 | (_initialize_sh_tdep): Set tm_print_insn. |
| 2891 | * sparc-tdep.c (_initialize_sparc_tdep): New function. |
| 2892 | * w65-tdep.c (print_insn): Remove. |
| 2893 | (_initialize_w65_tdep): New function. |
| 2894 | * z8k-tdep.c (print_insn): Remove. |
| 2895 | (gdb_print_insn_z8k): New function. |
| 2896 | (_initialize_z8k_tdep): Set tm_print_insn. |
| 2897 | * printcmd.c (print_insn): New function, generic disassembler. |
| 2898 | * config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o. |
| 2899 | |
| 2900 | Mon Jan 16 15:43:29 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 2901 | |
| 2902 | * Makefile.in: add new files remote-vx29k.c, config/a29k/tm-vx29k.h, |
| 2903 | and config/a29k/vx29k.mt. |
| 2904 | * configure.in: add new configuration a29k-*-vxworks. |
| 2905 | * remote-vx29k.c: new file merged from WRS. |
| 2906 | * remote-vx.c: merge changes from WRS. |
| 2907 | * config/a29k/vx29k.mt: new file for new configuration. |
| 2908 | * config/a29k/tm-vx29k.h: new header file for newconfiguration. |
| 2909 | |
| 2910 | Sun Jan 15 14:36:19 1995 Steve Chamberlain <sac@splat> |
| 2911 | |
| 2912 | * breakpoint.h (disable_breakpoint, enable_breakpoint): |
| 2913 | New declarations. |
| 2914 | (enum bpdisp): Change name of 'delete' member to 'del'. |
| 2915 | (struct bpstat): Changed name to 'bpstats'. |
| 2916 | * breakpoint.c (disable_breakpoint, enable_breakpoint, |
| 2917 | breakpoint_chain): Made globally visible. |
| 2918 | (bpstat_stop_status): Use new name for bpstat. |
| 2919 | (break_command_1, watch_command_1, catch_command_1, |
| 2920 | breakpoint_auto_delete, denable_delete_breakpoint): Use 'del' |
| 2921 | instead of 'delete'. |
| 2922 | (set_breakpoint_sal): New function. |
| 2923 | * defs.h (registers_changed_hook): New declaration. |
| 2924 | * infcmd.c (run_stack_dummy): 'delete' is now 'del'. |
| 2925 | * inflow.c (new_tty): Treat WIN32 in same way as __GO32__ |
| 2926 | * main.c (main): Don't scan options when in WIN32 and exit |
| 2927 | without entering main loop. |
| 2928 | * m2-exp.y (m2_elx): Member 'class' is now 'aclass'. |
| 2929 | * symtab.h (struct symbol, struct partial_symbol): Changed name of |
| 2930 | member 'class' to 'aclass'. |
| 2931 | (SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change. |
| 2932 | * top.c (registers_changed_hook): New definition. |
| 2933 | * utils.c (quit, notice_quit, initialize_utils): Treate WIN32 |
| 2934 | in same way as __GO32__. |
| 2935 | * value.h (c_typedef_print): Rename 'new' argument. |
| 2936 | |
| 2937 | * w65-tdep.c, config/tm-w65.h, config/w65.mt: New files. |
| 2938 | * configure.in: Suppprt for w65, |
| 2939 | |
| 2940 | |
| 2941 | Sat Jan 14 11:18:11 1995 Jim Kingdon <kingdon@lioth.cygnus.com> |
| 2942 | |
| 2943 | * infcmd.c (signal_command): For "signal 0", pass (CORE_ADDR)-1, |
| 2944 | not stop_pc, to proceed. |
| 2945 | |
| 2946 | * eval.c (evaluate_subexp): Clear expect_type except for C++ and CHILL. |
| 2947 | |
| 2948 | Fri Jan 13 17:52:57 1995 Jim Kingdon <kingdon@lioth.cygnus.com> |
| 2949 | |
| 2950 | * infcmd.c (signal_command): Accept "signal 0"; the change to not |
| 2951 | accept it was accidental. "handle 0" and "info signal 0" remain |
| 2952 | illegal, though. |
| 2953 | |
| 2954 | Fri Jan 13 15:19:01 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 2955 | |
| 2956 | * Makefile.in (all): Don't make libgdb-files. |
| 2957 | (libgdb): New action, makes libgdb-files. |
| 2958 | |
| 2959 | Thu Jan 12 21:23:25 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 2960 | |
| 2961 | * stabsread.c (read_enum_type): When pending enum symbols are |
| 2962 | put into the enum type, they must be inserted in "backwards |
| 2963 | order, in case we've overflowed a struct pending buffer. |
| 2964 | |
| 2965 | start-sanitize-gdbtk |
| 2966 | Thu Jan 12 15:02:40 1995 Stu Grossman (grossman@cygnus.com) |
| 2967 | |
| 2968 | * gdbtk.c, gdbtk.tcl: Update/add copyright. |
| 2969 | * gdbtk.tcl (build_framework): Several fixes for filespec widget, |
| 2970 | including dismiss button, and better error handling. |
| 2971 | * (create_command_win): Bind button 2 to retrieve selection. |
| 2972 | end-sanitize-gdbtk |
| 2973 | |
| 2974 | Thu Jan 12 09:33:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 2975 | |
| 2976 | * README: Add note about SPARCworks cc release 3.0 and higher. |
| 2977 | |
| 2978 | Add procfs support for Alpha OSF/1-2.x. |
| 2979 | * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic |
| 2980 | OSF/1 native support. |
| 2981 | * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly. |
| 2982 | (MUNCH_DEFINE): Removed. |
| 2983 | * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files |
| 2984 | for procfs support. |
| 2985 | * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1 |
| 2986 | release 2.x and higher, else alpha-osf1.mh, as the procfs support |
| 2987 | in release 1.x is incomplete. |
| 2988 | * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh. |
| 2989 | * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset, |
| 2990 | fill_fpgregset): New routines for procfs support. |
| 2991 | * inftarg.c (_initialize_inftarg): Don't add ptrace support |
| 2992 | if we have an optional procfs and /proc is accessible. |
| 2993 | * procfs.c: Include sys/fault.h and sys/syscall.h before |
| 2994 | including sys/procfs.h. |
| 2995 | (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL |
| 2996 | is defined, additionally perform a PIOCSSIG to really terminate |
| 2997 | the inferior. |
| 2998 | (create_procinfo): Always return a result. |
| 2999 | (create_procinfo, do_attach): Don't trace T_IFAULT faults if |
| 3000 | PROCFS_DONT_TRACE_IFAULT is defined. |
| 3001 | (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as |
| 3002 | argument to startup_inferior if it is defined. |
| 3003 | (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead |
| 3004 | of tracing exits from exec system calls. Needed for the user level |
| 3005 | loader under Alpha OSF/1. |
| 3006 | (do_detach): Clear any pending signal if we want to detach from |
| 3007 | a process without a signal. |
| 3008 | (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined, |
| 3009 | don't issue a PIOCSSIG if pr_cursig already contains the signal we |
| 3010 | intend to set. |
| 3011 | (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the |
| 3012 | pending signals are numbered from 1 instead of 0. |
| 3013 | (info_proc_mappings): Increase size of output format for addresses |
| 3014 | if BFD_HOST_64_BIT is defined. |
| 3015 | (procfs_stop): Renamed from child_stop. |
| 3016 | (_initialize_procfs): Don't add procfs support if we have an |
| 3017 | optional procfs and /proc is not accessible. |
| 3018 | |
| 3019 | start-sanitize-gdbtk |
| 3020 | Wed Jan 11 17:06:55 1995 Stu Grossman (grossman@cygnus.com) |
| 3021 | |
| 3022 | * gdbtk.tcl: Add button to control mixed source disassembly. |
| 3023 | Use text widgets in expr window. The give me more control over |
| 3024 | layout. |
| 3025 | Add auto-updating of exprs in expression window. |
| 3026 | Handle expressions out of scope a bit better. |
| 3027 | Make selected window pop up to the top when invoked via the |
| 3028 | menubar. |
| 3029 | Make copyright message have raised relief. |
| 3030 | |
| 3031 | * gdbtk.c (gdbtk_init): Improve handling for errors in gdbtk.tcl |
| 3032 | during startup. |
| 3033 | end-sanitize-gdbtk |
| 3034 | |
| 3035 | Wed Jan 11 17:53:26 1995 Rob Savoye <rob@darkstar.cygnus.com> |
| 3036 | |
| 3037 | * array-rom.c: Add support for most commands. |
| 3038 | |
| 3039 | * monitor.c: Add GDB remote protocol for the hybrid environment on |
| 3040 | the Array board. |
| 3041 | |
| 3042 | Wed Jan 11 00:44:01 1995 Jeff Law (law@snake.cs.utah.edu) |
| 3043 | |
| 3044 | * command.c (show_user_1): Use print_command_line to show a user |
| 3045 | defined command (including control structures). |
| 3046 | |
| 3047 | * top.c (init_main): Change documentation for user defined |
| 3048 | commands to indicate they may accept up to ten arguments. |
| 3049 | |
| 3050 | Tue Jan 10 16:22:41 1995 Jim Kingdon <kingdon@lioth.cygnus.com> |
| 3051 | |
| 3052 | * mips-tdep.c (mips_skip_prologue): Accept or as well as addu for |
| 3053 | `move $s8, $sp' instruction. |
| 3054 | |
| 3055 | Sun Jan 8 12:45:34 1995 Jim Kingdon <kingdon@deneb.cygnus.com> |
| 3056 | |
| 3057 | * target.c, target.h (target_signal_from_command): New function. |
| 3058 | * infrun.c (handle_command, signals_info), infcmd.c |
| 3059 | (signal_command): Use it. |
| 3060 | * infrun.c, infcmd.c: Update docstrings for these commands. |
| 3061 | |
| 3062 | * target.h (enum target_signal), target.c (signals), target.c |
| 3063 | (target_signal_from_host, target_signal_to_host): Add |
| 3064 | TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx. |
| 3065 | * config/tm-lynx.h: Define signal numbers for realtime events. |
| 3066 | |
| 3067 | Sat Jan 7 07:23:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) |
| 3068 | |
| 3069 | * dbxread.c (process_one_symbol): Handle N_FUN symbols |
| 3070 | for Sun acc 3.0 under SunOS4. |
| 3071 | |
| 3072 | Changes to improve handling of runtime common symbols |
| 3073 | under SunOS4. |
| 3074 | * minsyms.c (get_symbol_leading_char): New routine to determine |
| 3075 | the leading symbol character for an objfile. |
| 3076 | (prim_record_minimal_symbol_and_info, install_minimal_symbols): |
| 3077 | Use it. |
| 3078 | * objfiles.h (rt_common_objfile): New global, points to objfile |
| 3079 | containing the runtime common minimal symbols. |
| 3080 | * objfiles.c (free_objfile): Mark rt_common_objfile as |
| 3081 | unallocated before freeing it. |
| 3082 | * solib.c (allocate_rt_common_objfile): New routine to allocate |
| 3083 | an objfile for the runtime common minimal symbols. |
| 3084 | (solib_add_common_symbols): Allocate an objfile for the runtime |
| 3085 | common symbols if necessary and put common symbols into it. |
| 3086 | Clean up code and comments. |
| 3087 | (solib_add, special_symbol_handling): Cleanup comments regarding |
| 3088 | runtime common symbols. |
| 3089 | * stabsread.c (scan_file_globals_1): New routine, contains |
| 3090 | old scan_file_globals code. Checks if there are any unresolved |
| 3091 | global symbols before starting the expensive minimal symbol table |
| 3092 | search. |
| 3093 | (scan_file_globals): Now calls scan_file_globals_1 for the passed |
| 3094 | objfile and eventually for the runtime common objfile. Complains |
| 3095 | about any unresolved global symbols and removes them from the |
| 3096 | global symbol chain to avoid dangling pointers into the symbol |
| 3097 | table if the symbol table is reread. |
| 3098 | |
| 3099 | Thu Jan 5 17:38:29 1995 Stu Grossman (grossman@cygnus.com) |
| 3100 | |
| 3101 | * Makefile.in (install_only uninstall): Indent for clarity. |
| 3102 | |
| 3103 | * core.c (dis_asm_read_memory): Add call to |
| 3104 | dis_asm_read_memory_hook to provide alternate way for disassembler |
| 3105 | to read memory. |
| 3106 | |
| 3107 | * defs.h: Protect from multiple inclusion. Add decl for |
| 3108 | dis_asm_read_memory_hook. |
| 3109 | |
| 3110 | * top.c: Make window startup be the default. |
| 3111 | * Add dis_asm_read_memory_hook. |
| 3112 | |
| 3113 | start-sanitize-gdbtk |
| 3114 | * gdbtk.c (finish_saving_output): Don't do anything if not saving |
| 3115 | output. |
| 3116 | * (breakpoint_notify): Don't send null filename to tcl. |
| 3117 | * (gdb_eval): New tcl command to eval an expression. |
| 3118 | * (gdb_disassemble): New tcl command to do disassembly. This |
| 3119 | allows tcl code to choose between exec file and target memeory, |
| 3120 | and can also do mixed source and assembly. |
| 3121 | * (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure |
| 3122 | that more of the environment is set up. Also, create link between |
| 3123 | gdb and tcl vars disassemble{-_}from{-_}exec. |
| 3124 | |
| 3125 | * gdbtk.tcl: New expression window support. |
| 3126 | * Make assembly window be 80 columns wide. |
| 3127 | * Use new disassembly method. Add menu items to select |
| 3128 | disassembly from exec file or target. |
| 3129 | * Change View menubar item to Options. |
| 3130 | |
| 3131 | * Get rid of Stack, Breakpoints, Signals, and Variables Windows, |
| 3132 | since they don't exist yet. |
| 3133 | |
| 3134 | * Pop up a copyright window on startup. |
| 3135 | end-sanitize-gdbtk |
| 3136 | |
| 3137 | Thu Jan 5 01:16:40 1995 Jeff Law (law@snake.cs.utah.edu) |
| 3138 | |
| 3139 | * stabsread.c (define_symbol): Handle `a' symbol type used for |
| 3140 | reference parameter passed in a register. |
| 3141 | |
| 3142 | start-sanitize-gdbtk |
| 3143 | Wed Jan 4 19:49:10 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 3144 | |
| 3145 | * gdbtk.tcl (build_framework): Add standard commands menu, more |
| 3146 | windows to standard windows menu. |
| 3147 | (not_implemented_yet): Clarify message. |
| 3148 | end-sanitize-gdbtk |
| 3149 | |
| 3150 | Wed Jan 4 12:27:29 1995 Kung Hsu <kung@mexican.cygnus.com> |
| 3151 | |
| 3152 | * defs.h: move include tm.h up, so that the type LONGEST can |
| 3153 | also based on the target requirement to determine. In this case |
| 3154 | target mips64. |
| 3155 | |
| 3156 | * remote-os9k.c (rombug_open): catch exception e in rombug. |
| 3157 | * remote-os9k.c (rombug_wait): print message before register display |
| 3158 | from rombug. |
| 3159 | |
| 3160 | Wed Jan 4 09:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com) |
| 3161 | |
| 3162 | * top.c (locate_arg): Call strchr not index. |
| 3163 | |
| 3164 | Tue Jan 3 16:52:03 1995 Per Bothner <bothner@kalessin.cygnus.com> |
| 3165 | |
| 3166 | * ch-exp.y (literal): Recognize NULL. |
| 3167 | (tuple): Parse simple unlabelled tuples. |
| 3168 | * eval.c (evaluate_subexp case OP_ARRAY): Use expect_type to |
| 3169 | evaluate brace-initializer-expressions depending on context. |
| 3170 | (evaluate_subexp case UNOP_CAST): Pass the target type as |
| 3171 | expected type when evaluating the expression. |
| 3172 | |
| 3173 | * ch-typeprint.c (chill_type_print_base): Get names of PTR and |
| 3174 | BOOL from TYPE_NAME. |
| 3175 | * ch-valprint.c (chill_print_type_scalar): New function, to handle |
| 3176 | TYPE_CODE_RANGE better than print_type_scalar does. |
| 3177 | (chill_val_print_array_elements): Use above new function. |
| 3178 | |
| 3179 | Mon Jan 2 15:02:51 1995 Stan Shebs <shebs@andros.cygnus.com> |
| 3180 | |
| 3181 | * remote-udi.c (udi_load): Tell symbol_file_add that the |
| 3182 | program being loaded is the main program. |
| 3183 | |
| 3184 | For older changes see ChangeLog-94 |
| 3185 | \f |
| 3186 | Local Variables: |
| 3187 | mode: indented-text |
| 3188 | left-margin: 8 |
| 3189 | fill-column: 74 |
| 3190 | version-control: never |
| 3191 | End: |