| 1 | #Copyright 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc. |
| 2 | |
| 3 | # This file is part of GDB. |
| 4 | |
| 5 | # This program is free software; you can redistribute it and/or modify |
| 6 | # it under the terms of the GNU General Public License as published by |
| 7 | # the Free Software Foundation; either version 2 of the License, or |
| 8 | # (at your option) any later version. |
| 9 | # |
| 10 | # This program is distributed in the hope that it will be useful, |
| 11 | # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 12 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 13 | # GNU General Public License for more details. |
| 14 | # |
| 15 | # You should have received a copy of the GNU General Public License |
| 16 | # along with this program; if not, write to the Free Software |
| 17 | # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 18 | |
| 19 | prefix = /usr/local |
| 20 | |
| 21 | program_transform_name = |
| 22 | exec_prefix = $(prefix) |
| 23 | bindir = $(exec_prefix)/bin |
| 24 | libdir = $(exec_prefix)/lib |
| 25 | tooldir = $(libdir)/$(target_alias) |
| 26 | |
| 27 | datadir = $(prefix)/lib |
| 28 | mandir = $(prefix)/man |
| 29 | man1dir = $(mandir)/man1 |
| 30 | man2dir = $(mandir)/man2 |
| 31 | man3dir = $(mandir)/man3 |
| 32 | man4dir = $(mandir)/man4 |
| 33 | man5dir = $(mandir)/man5 |
| 34 | man6dir = $(mandir)/man6 |
| 35 | man7dir = $(mandir)/man7 |
| 36 | man8dir = $(mandir)/man8 |
| 37 | man9dir = $(mandir)/man9 |
| 38 | infodir = $(prefix)/info |
| 39 | includedir = $(prefix)/include |
| 40 | docdir = $(datadir)/doc |
| 41 | |
| 42 | SHELL = /bin/sh |
| 43 | |
| 44 | INSTALL = install -c |
| 45 | INSTALL_PROGRAM = $(INSTALL) |
| 46 | INSTALL_DATA = $(INSTALL) |
| 47 | |
| 48 | AR = ar |
| 49 | AR_FLAGS = qv |
| 50 | RANLIB = ranlib |
| 51 | |
| 52 | # Flags that describe where you can find the termcap library. |
| 53 | # This can be overridden in the host Makefile fragment file. |
| 54 | TERMCAP = -ltermcap |
| 55 | |
| 56 | # System V: If you compile gdb with a compiler which uses the coff |
| 57 | # encapsulation feature (this is a function of the compiler used, NOT |
| 58 | # of the m-?.h file selected by config.gdb), you must make sure that |
| 59 | # the GNU nm is the one that is used by munch. |
| 60 | |
| 61 | # If you are compiling with GCC, make sure that either 1) You use the |
| 62 | # -traditional flag, or 2) You have the fixed include files where GCC |
| 63 | # can reach them. Otherwise the ioctl calls in inflow.c |
| 64 | # will be incorrectly compiled. The "fixincludes" script in the gcc |
| 65 | # distribution will fix your include files up. |
| 66 | #CC=cc |
| 67 | #CC=gcc -traditional |
| 68 | GCC=gcc |
| 69 | |
| 70 | # Directory containing source files. Don't clean up the spacing, |
| 71 | # this exact string is matched for by the "configure" script. |
| 72 | srcdir = . |
| 73 | |
| 74 | # It is also possible that you will need to add -I/usr/include/sys to the |
| 75 | # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which |
| 76 | # is where it should be according to Posix). |
| 77 | |
| 78 | # If you use bison instead of yacc, it needs to include the "-y" argument. |
| 79 | #BISON="bison -y" |
| 80 | BISON=yacc |
| 81 | YACC=$(BISON) |
| 82 | |
| 83 | # where to find texinfo; GDB dist should include a recent one |
| 84 | TEXIDIR=${srcdir}/../texinfo |
| 85 | |
| 86 | # where to find makeinfo, preferably one designed for texinfo-2 |
| 87 | MAKEINFO=makeinfo |
| 88 | |
| 89 | # Set this up with gcc if you have gnu ld and the loader will print out |
| 90 | # line numbers for undefinded refs. |
| 91 | #CC-LD=gcc -static |
| 92 | CC-LD=${CC} |
| 93 | |
| 94 | # Where is the "include" directory? Traditionally ../include or ./include |
| 95 | INCLUDE_DIR = ${srcdir}/../include |
| 96 | INCLUDE_DEP = $$(INCLUDE_DIR) |
| 97 | |
| 98 | # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc |
| 99 | # or ./mmalloc (When we want the binary library built from it, we use |
| 100 | # ${MMALLOC_DIR}${subdir}.) |
| 101 | # Note that mmalloc can still be used on systems without mmap(). |
| 102 | # To use your system malloc, comment out the following defines. |
| 103 | MMALLOC_DIR = ${srcdir}/../mmalloc |
| 104 | MMALLOC_DEP = $$(MMALLOC_DIR) |
| 105 | MMALLOC_LIB = ./../mmalloc${subdir}/libmmalloc.a |
| 106 | # To use your system malloc, uncomment MMALLOC_DISABLE. |
| 107 | #MMALLOC_DISABLE = -DNO_MMALLOC |
| 108 | # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK |
| 109 | #MMALLOC_CHECK = -DNO_MMALLOC_CHECK |
| 110 | MMALLOC_CFLAGS = ${MMALLOC_CHECK} ${MMALLOC_DISABLE} |
| 111 | |
| 112 | # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd |
| 113 | # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.) |
| 114 | BFD_DIR = ${srcdir}/../bfd |
| 115 | BFD_DEP = $$(BFD_DIR) |
| 116 | BFD_LIB = ./../bfd${subdir}/libbfd.a |
| 117 | |
| 118 | # Where is the source dir for the READLINE library? Traditionally in .. or . |
| 119 | # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.) |
| 120 | READLINE_DIR = ${srcdir}/../readline |
| 121 | READLINE_DEP = $$(READLINE_DIR) |
| 122 | RL_LIB = ./../readline${subdir}/libreadline.a |
| 123 | |
| 124 | # All the includes used for CFLAGS and for lint. |
| 125 | # -I. for config files. |
| 126 | # -I${srcdir} possibly for regex.h also. |
| 127 | # -I${srcdir}/config for more generic config files. |
| 128 | INCLUDE_CFLAGS = -I. -I${srcdir} -I${srcdir}/config -I$(INCLUDE_DIR) |
| 129 | |
| 130 | # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS |
| 131 | # from the config/ directory. |
| 132 | GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS} |
| 133 | #PROFILE_CFLAGS = -pg |
| 134 | |
| 135 | # CFLAGS is specifically reserved for setting from the command line |
| 136 | # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes". |
| 137 | CFLAGS = -g |
| 138 | # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros. |
| 139 | INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS} |
| 140 | # None of the things in CFLAGS will do any harm, and on some systems |
| 141 | # (e.g. SunOS4) it is important to use the MH_CFLAGS. |
| 142 | LDFLAGS = $(CFLAGS) |
| 143 | |
| 144 | # Where is the "-liberty" library, containing getopt and obstack? |
| 145 | LIBIBERTY_DIR = ${srcdir}/../libiberty |
| 146 | LIBIBERTY = ./../libiberty${subdir}/libiberty.a |
| 147 | |
| 148 | # Where is the "-lopcodes" library, with (some of) the opcode tables and |
| 149 | # disassemblers? |
| 150 | OPCODES = ./../opcodes${subdir}/libopcodes.a |
| 151 | |
| 152 | # The config/mh-* file must define REGEX and REGEX1 on USG machines. |
| 153 | # If your sysyem is missing alloca(), or, more likely, it's there but |
| 154 | # it doesn't work, define ALLOCA & ALLOCA1 too. |
| 155 | |
| 156 | # Libraries and corresponding dependencies for compiling gdb. |
| 157 | # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs. |
| 158 | # TERMCAP comes after readline, since readline depends on it. |
| 159 | CLIBS = ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \ |
| 160 | ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS} |
| 161 | CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \ |
| 162 | ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} |
| 163 | |
| 164 | ADD_FILES = ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES} |
| 165 | ADD_DEPS = ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES} |
| 166 | |
| 167 | VERSION = 4.8.4 |
| 168 | DIST=gdb |
| 169 | |
| 170 | LINT=/usr/5bin/lint |
| 171 | LINTFLAGS= -I${BFD_DIR} |
| 172 | |
| 173 | RUNTEST=runtest |
| 174 | RUNTESTFLAGS= |
| 175 | |
| 176 | # Host and target-dependent makefile fragments come in here. |
| 177 | #### |
| 178 | # End of host and target-dependent makefile fragments |
| 179 | |
| 180 | FLAGS_TO_PASS = \ |
| 181 | "prefix=$(prefix)" \ |
| 182 | "exec_prefix=$(exec_prefix)" \ |
| 183 | "against=$(against)" \ |
| 184 | "AR=$(AR)" \ |
| 185 | "AR_FLAGS=$(AR_FLAGS)" \ |
| 186 | "CC=$(CC)" \ |
| 187 | "CFLAGS=$(CFLAGS)" \ |
| 188 | "CHILLFLAGS=$(CHILLFLAGS)" \ |
| 189 | "CHILL=$(CHILL)" \ |
| 190 | "CHILL_LIB=$(CHILL_LIB)" \ |
| 191 | "CXX=$(CXX)" \ |
| 192 | "CXXFLAGS=$(CXXFLAGS)" \ |
| 193 | "RANLIB=$(RANLIB)" \ |
| 194 | "MAKEINFO=$(MAKEINFO)" \ |
| 195 | "INSTALL=$(INSTALL)" \ |
| 196 | "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ |
| 197 | "INSTALL_DATA=$(INSTALL_DATA)" \ |
| 198 | "RUNTEST=$(RUNTEST)" \ |
| 199 | "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ |
| 200 | "BISON=$(BISON)" |
| 201 | |
| 202 | # Flags that we pass when building the testsuite. |
| 203 | |
| 204 | CC_FOR_TARGET = ` \ |
| 205 | if [ -f $${rootme}/../gcc/Makefile ] ; then \ |
| 206 | echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \ |
| 207 | else \ |
| 208 | if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ |
| 209 | echo $(CC); \ |
| 210 | else \ |
| 211 | t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ |
| 212 | fi; \ |
| 213 | fi` |
| 214 | |
| 215 | CXX = gcc |
| 216 | |
| 217 | CXX_FOR_TARGET = ` \ |
| 218 | if [ -f $${rootme}/../gcc/Makefile ] ; then \ |
| 219 | echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \ |
| 220 | else \ |
| 221 | if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ |
| 222 | echo $(CXX); \ |
| 223 | else \ |
| 224 | t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ |
| 225 | fi; \ |
| 226 | fi` |
| 227 | |
| 228 | CHILLFLAGS = $(CFLAGS) |
| 229 | CHILL = gcc |
| 230 | CHILL_FOR_TARGET = ` \ |
| 231 | if [ -f $${rootme}/../gcc/Makefile ] ; then \ |
| 232 | echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../chillrt/; \ |
| 233 | else \ |
| 234 | if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ |
| 235 | echo $(CC); \ |
| 236 | else \ |
| 237 | t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ |
| 238 | fi; \ |
| 239 | fi` |
| 240 | CHILL_LIB = -lchill |
| 241 | |
| 242 | # The use of $$(x_FOR_TARGET) reduces the command line length by not |
| 243 | # duplicating the lengthy definition. |
| 244 | TARGET_FLAGS_TO_PASS = \ |
| 245 | "prefix=$(prefix)" \ |
| 246 | "exec_prefix=$(exec_prefix)" \ |
| 247 | "against=$(against)" \ |
| 248 | 'CC=$$(CC_FOR_TARGET)' \ |
| 249 | "CC_FOR_TARGET=$(CC_FOR_TARGET)" \ |
| 250 | "CFLAGS=$(CFLAGS)" \ |
| 251 | "CHILLFLAGS=$(CHILLFLAGS)" \ |
| 252 | 'CHILL=$$(CHILL_FOR_TARGET)' \ |
| 253 | "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \ |
| 254 | "CHILL_LIB=$(CHILL_LIB)" \ |
| 255 | 'CXX=$$(CXX_FOR_TARGET)' \ |
| 256 | "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \ |
| 257 | "CXXFLAGS=$(CXXFLAGS)" \ |
| 258 | "MAKEINFO=$(MAKEINFO)" \ |
| 259 | "INSTALL=$(INSTALL)" \ |
| 260 | "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ |
| 261 | "INSTALL_DATA=$(INSTALL_DATA)" \ |
| 262 | "RUNTEST=$(RUNTEST)" \ |
| 263 | "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ |
| 264 | "BISON=$(BISON)" |
| 265 | |
| 266 | # All source files that go into linking GDB, except config-specified files. |
| 267 | # Source files which are included via a config/*/* Makefile fragment should |
| 268 | # *not* be specified here; they're in "ALLDEPFILES". |
| 269 | SFILES = ${srcdir}/blockframe.c ${srcdir}/breakpoint.c ${srcdir}/buildsym.c \ |
| 270 | ${srcdir}/c-exp.y ${srcdir}/c-lang.c ${srcdir}/c-typeprint.c \ |
| 271 | ${srcdir}/c-valprint.c ${srcdir}/ch-exp.y ${srcdir}/ch-lang.c \ |
| 272 | ${srcdir}/ch-typeprint.c ${srcdir}/ch-valprint.c ${srcdir}/coffread.c \ |
| 273 | ${srcdir}/command.c ${srcdir}/complaints.c ${srcdir}/core.c \ |
| 274 | ${srcdir}/cp-valprint.c ${srcdir}/dbxread.c ${srcdir}/demangle.c \ |
| 275 | ${srcdir}/dwarfread.c ${srcdir}/elfread.c ${srcdir}/environ.c \ |
| 276 | ${srcdir}/eval.c ${srcdir}/expprint.c ${srcdir}/findvar.c \ |
| 277 | ${srcdir}/gdbtypes.c \ |
| 278 | ${srcdir}/infcmd.c ${srcdir}/inflow.c ${srcdir}/infrun.c \ |
| 279 | ${srcdir}/language.c ${srcdir}/m2-exp.y ${srcdir}/m2-lang.c \ |
| 280 | ${srcdir}/m2-typeprint.c \ |
| 281 | ${srcdir}/m2-valprint.c ${srcdir}/main.c ${srcdir}/maint.c \ |
| 282 | ${srcdir}/mem-break.c ${srcdir}/minsyms.c ${srcdir}/mipsread.c \ |
| 283 | ${srcdir}/objfiles.c ${srcdir}/parse.c ${srcdir}/printcmd.c \ |
| 284 | ${srcdir}/remote.c ${srcdir}/source.c ${srcdir}/stabsread.c \ |
| 285 | ${srcdir}/stack.c \ |
| 286 | ${srcdir}/symfile.c ${srcdir}/symmisc.c ${srcdir}/symtab.c \ |
| 287 | ${srcdir}/target.c ${srcdir}/typeprint.c ${srcdir}/utils.c \ |
| 288 | ${srcdir}/valarith.c \ |
| 289 | ${srcdir}/valops.c ${srcdir}/valprint.c ${srcdir}/values.c \ |
| 290 | ${srcdir}/serial.c ser-hardwire.c |
| 291 | |
| 292 | # Files that are not source code, but need to go into gdb-$(VERSION).tar.Z. |
| 293 | NONSRC = ${srcdir}/Makefile.in ${srcdir}/depend ${srcdir}/alldeps.mak \ |
| 294 | ${srcdir}/munch ${srcdir}/configure.in \ |
| 295 | ${srcdir}/ChangeLog ${srcdir}/ChangeLog-9091 ${srcdir}/ChangeLog-3.x \ |
| 296 | ${srcdir}/gdb.1 ${srcdir}/refcard.ps ${srcdir}/README ${srcdir}/TODO \ |
| 297 | TAGS ${srcdir}/NEWS ${srcdir}/Projects ${srcdir}/.gdbinit \ |
| 298 | ${srcdir}/COPYING $(YYFILES) ${srcdir}/copying.c \ |
| 299 | ${srcdir}/copying.awk \ |
| 300 | ${srcdir}/saber.suppress ${srcdir}/standalone.c ${srcdir}/stuff.c \ |
| 301 | ${srcdir}/kdb-start.c ${srcdir}/putenv.c ${srcdir}/gcc.patch \ |
| 302 | ${srcdir}/nindy-share/Makefile ${srcdir}/nindy-share/VERSION \ |
| 303 | ${srcdir}/nindy-share/README ${srcdir}/vx-share/README \ |
| 304 | ${srcdir}/config/convex/Convex.notes |
| 305 | |
| 306 | # All source files that lint should look at |
| 307 | LINTFILES = $(SFILES) $(YYFILES) init.c |
| 308 | |
| 309 | # Any additional files specified on these lines should also be added to |
| 310 | # the NONSRC definition, so they go in the tar files. |
| 311 | SFILES_STAND = $(SFILES) standalone.c |
| 312 | SFILES_KGDB = $(SFILES) stuff.c kdb-start.c |
| 313 | |
| 314 | # Header files that are not named in config/*/* Makefile fragments go here. |
| 315 | HFILES = ${srcdir}/breakpoint.h ${srcdir}/buildsym.h ${srcdir}/call-cmds.h \ |
| 316 | ${srcdir}/command.h ${srcdir}/defs.h ${srcdir}/environ.h \ |
| 317 | ${srcdir}/expression.h ${srcdir}/frame.h ${srcdir}/gdbcmd.h \ |
| 318 | ${srcdir}/gdbcore.h ${srcdir}/gdbtypes.h ${srcdir}/gdb-stabs.h \ |
| 319 | ${srcdir}/inferior.h ${srcdir}/language.h ${srcdir}/minimon.h \ |
| 320 | ${srcdir}/objfiles.h ${srcdir}/parser-defs.h \ |
| 321 | ${srcdir}/partial-stab.h ${srcdir}/serial.h ${srcdir}/signals.h \ |
| 322 | ${srcdir}/solib.h ${srcdir}/symfile.h ${srcdir}/symtab.h \ |
| 323 | ${srcdir}/stabsread.h ${srcdir}/target.h ${srcdir}/terminal.h \ |
| 324 | ${srcdir}/typeprint.h ${srcdir}/xcoffsolib.h ${srcdir}/value.h \ |
| 325 | ${srcdir}/c-lang.h ${srcdir}/ch-lang.h ${srcdir}/m2-lang.h \ |
| 326 | ${srcdir}/complaints.h ${srcdir}/ns32k-opcode.h ${srcdir}/valprint.h \ |
| 327 | ${srcdir}/config/m68k/tm-m68k.h ${srcdir}/config/pa/tm-hppa.h \ |
| 328 | ${srcdir}/config/i960/tm-i960.h ${srcdir}/config/sparc/tm-sparc.h \ |
| 329 | ${srcdir}/config/tm-sunos.h \ |
| 330 | ${srcdir}/config/tm-sysv4.h ${srcdir}/config/m68k/xm-m68k.h \ |
| 331 | ${srcdir}/config/sparc/xm-sparc.h \ |
| 332 | ${srcdir}/config/xm-sysv4.h ${srcdir}/config/vax/xm-vax.h \ |
| 333 | ${srcdir}/config/nm-trash.h \ |
| 334 | ${srcdir}/29k-share/udi/udiphcfg.h ${srcdir}/29k-share/udi/udiphsun.h \ |
| 335 | ${srcdir}/29k-share/udi/udiproc.h ${srcdir}/29k-share/udi/udipt29k.h \ |
| 336 | ${srcdir}/29k-share/udi/udiptcfg.h ${srcdir}/29k-share/udi/udisoc.h \ |
| 337 | ${srcdir}/29k-share/udi_soc ${srcdir}/nindy-share/b.out.h \ |
| 338 | ${srcdir}/nindy-share/block_io.h ${srcdir}/nindy-share/coff.h \ |
| 339 | ${srcdir}/nindy-share/demux.h ${srcdir}/nindy-share/env.h \ |
| 340 | ${srcdir}/nindy-share/stop.h ${srcdir}/nindy-share/ttycntl.h \ |
| 341 | ${srcdir}/vx-share/dbgRpcLib.h ${srcdir}/vx-share/ptrace.h \ |
| 342 | ${srcdir}/vx-share/vxTypes.h ${srcdir}/vx-share/vxWorks.h \ |
| 343 | ${srcdir}/vx-share/wait.h ${srcdir}/vx-share/xdr_ld.h \ |
| 344 | ${srcdir}/vx-share/xdr_ptrace.h ${srcdir}/vx-share/xdr_rdb.h |
| 345 | |
| 346 | # GDB "info" files, which should be included in their entirety |
| 347 | INFOFILES = gdb.info* |
| 348 | |
| 349 | REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar |
| 350 | |
| 351 | POSSLIBS = ${srcdir}/regex.c ${srcdir}/regex.h ${srcdir}/alloca.c |
| 352 | |
| 353 | TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c |
| 354 | |
| 355 | # Subdirectories of gdb, which should be included in their entirety in |
| 356 | # gdb-xxx.tar.Z: |
| 357 | TARDIRS = doc sparclite # tests |
| 358 | |
| 359 | DEPFILES = ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES} |
| 360 | |
| 361 | SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) |
| 362 | TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS} |
| 363 | |
| 364 | TARFILES = ${SFILES} ${HFILES} ${NONSRC} ${ALLDEPFILES} $(ALLCONFIG) \ |
| 365 | $(ALLPARAM) $(INFOFILES) ${POSSLIBS} ${REMOTE_EXAMPLES} |
| 366 | |
| 367 | OBS = version.o main.o blockframe.o breakpoint.o findvar.o stack.o source.o \ |
| 368 | values.o eval.o valops.o valarith.o valprint.o printcmd.o \ |
| 369 | symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \ |
| 370 | command.o utils.o expprint.o environ.o gdbtypes.o \ |
| 371 | copying.o $(DEPFILES) mem-break.o target.o \ |
| 372 | putenv.o parse.o language.o $(YYOBJ) \ |
| 373 | buildsym.o objfiles.o minsyms.o maint.o demangle.o \ |
| 374 | dbxread.o coffread.o elfread.o dwarfread.o mipsread.o \ |
| 375 | stabsread.o core.o c-lang.o ch-lang.o m2-lang.o complaints.o \ |
| 376 | typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \ |
| 377 | c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o \ |
| 378 | serial.o ser-hardwire.o |
| 379 | |
| 380 | RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES) |
| 381 | |
| 382 | TSOBS = inflow.o |
| 383 | |
| 384 | NTSOBS = standalone.o |
| 385 | |
| 386 | TSSTART = /lib/crt0.o |
| 387 | |
| 388 | NTSSTART = kdb-start.o |
| 389 | |
| 390 | SUBDIRS = doc testsuite |
| 391 | |
| 392 | # For now, shortcut the "configure GDB for fewer languages" stuff. |
| 393 | YYFILES = c-exp.tab.c m2-exp.tab.c ch-exp.tab.c |
| 394 | YYOBJ = c-exp.tab.o m2-exp.tab.o ch-exp.tab.o |
| 395 | |
| 396 | # Prevent Sun make from putting in the machine type. Setting |
| 397 | # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1. |
| 398 | .c.o: |
| 399 | ${CC} -c ${INTERNAL_CFLAGS} $< |
| 400 | |
| 401 | all: gdb |
| 402 | $(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do |
| 403 | |
| 404 | installcheck: |
| 405 | check: force |
| 406 | rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=check DODIRS=testsuite subdir_do |
| 407 | info dvi: force |
| 408 | $(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do |
| 409 | install-info: force |
| 410 | $(MAKE) $(FLAGS_TO_PASS) DO=install-info "DODIRS=$(SUBDIRS)" subdir_do |
| 411 | clean-info: force |
| 412 | $(MAKE) $(FLAGS_TO_PASS) DO=clean-info "DODIRS=$(SUBDIRS)" subdir_do |
| 413 | |
| 414 | gdb.z:gdb.1 |
| 415 | nroff -man $(srcdir)/gdb.1 | col -b > gdb.t |
| 416 | pack gdb.t ; rm -f gdb.t |
| 417 | mv gdb.t.z gdb.z |
| 418 | |
| 419 | install: gdb |
| 420 | -parent=`echo $(bindir)|sed -e 's@/[^/]*$$@@'`; \ |
| 421 | if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi |
| 422 | -if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; fi |
| 423 | -parent=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \ |
| 424 | if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi |
| 425 | -if [ -d $(man1dir) ] ; then true ; else mkdir $(man1dir) ; fi |
| 426 | -n=`t='$(program_transform_name)'; echo gdb | sed -e "" $$t`; \ |
| 427 | $(INSTALL_PROGRAM) gdb $(bindir)/$$n; \ |
| 428 | $(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$n.1 |
| 429 | $(M_INSTALL) |
| 430 | $(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do |
| 431 | |
| 432 | init.c: $(srcdir)/munch $(OBS) $(TSOBS) |
| 433 | $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c |
| 434 | |
| 435 | gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o |
| 436 | ${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdb \ |
| 437 | init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES) |
| 438 | |
| 439 | saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c |
| 440 | #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS |
| 441 | #load ./init.c $(SFILES) |
| 442 | #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/ch-exp.y |
| 443 | #unload ${srcdir}/vx-share/*.h |
| 444 | #unload ${srcdir}/nindy-share/[A-Z]* |
| 445 | #load c-exp.tab.c m2-exp.tab.c ch-exp.tab.c |
| 446 | #load copying.c version.c |
| 447 | #load ../opcodes/libopcodes.a |
| 448 | #load ../libiberty/libiberty.a |
| 449 | #load ../bfd/libbfd.a |
| 450 | #load ../readline/libreadline.a |
| 451 | #load ../mmalloc/libmmalloc.a |
| 452 | #load -ltermcap |
| 453 | #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'` |
| 454 | echo "Load .c corresponding to:" $(DEPFILES) |
| 455 | |
| 456 | |
| 457 | # This is useful when debugging GDB, because some Unix's don't let you run GDB |
| 458 | # on itself without copying the executable. So "make gdb1" will make |
| 459 | # gdb and put a copy in gdb1, and you can run it with "gdb gdb1". |
| 460 | # Removing gdb1 before the copy is the right thing if gdb1 is open |
| 461 | # in another process. |
| 462 | gdb1: gdb |
| 463 | rm -f gdb1 |
| 464 | cp gdb gdb1 |
| 465 | |
| 466 | # This is a remote stub which runs under unix and starts up an |
| 467 | # inferior process. This is at least useful for debugging GDB's |
| 468 | # remote support. |
| 469 | rapp: $(RAPP_OBS) |
| 470 | rm -f rapp_init.c |
| 471 | ${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c |
| 472 | ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS) |
| 473 | |
| 474 | # Support for building Makefile out of configured pieces, automatically |
| 475 | # generated dependencies, etc. alldeps.mak is a file that contains |
| 476 | # "make" variable definitions for all ALLDEPFILES, ALLPARAM, and ALLCONFIG, |
| 477 | # all cadged from the current contents of the config subtree. |
| 478 | |
| 479 | alldeps.mak: force |
| 480 | rm -f alldeps.mak alldeps*.tmp allparam*.tmp allconfig*.tmp |
| 481 | for i in `(cd ${srcdir}; find config -name '*.m[ht]' -print)` ; do \ |
| 482 | echo $$i >>allconfig.tmp; \ |
| 483 | awk <${srcdir}/$$i ' \ |
| 484 | $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \ |
| 485 | || $$1 == "NATDEPFILES=" { \ |
| 486 | for (i = 2; i <= NF; i++) \ |
| 487 | print $$i >> "alldeps.tmp" ; \ |
| 488 | } \ |
| 489 | $$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE=" { \ |
| 490 | print $$2 >> "allparam.tmp" }' ; \ |
| 491 | done |
| 492 | sort <alldeps.tmp | uniq | \ |
| 493 | sed -e 's/arm-convert.o/arm-convert.s/' \ |
| 494 | -e 's!^Onindy.o!nindy-share/Onindy.c!' \ |
| 495 | -e 's!^nindy.o!nindy-share/nindy.c!' \ |
| 496 | -e 's!ttybreak.o!nindy-share/ttybreak.c!' \ |
| 497 | -e 's!ttyflush.o!nindy-share/ttyflush.c!' \ |
| 498 | -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \ |
| 499 | -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \ |
| 500 | -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \ |
| 501 | -e 's!udr.o!29k-share/udi/udr.c!' \ |
| 502 | -e 's!udip2soc.o!29k-share/udi/udip2soc.c!' \ |
| 503 | -e '/..\/sim\//d' \ |
| 504 | -e '/..\/opcodes\//d' \ |
| 505 | -e 's/\.o/.c/' \ |
| 506 | >alldeps2.tmp |
| 507 | for i in `cat allparam.tmp` ; do \ |
| 508 | (cd ${srcdir} ; \ |
| 509 | find config -name $$i -print ) >>allparam2.tmp ; \ |
| 510 | done |
| 511 | echo '# Start of "alldeps.mak" definitions' >>alldeps.mak; |
| 512 | sort <alldeps2.tmp | uniq | awk 'BEGIN {printf "ALLDEPFILES="} \ |
| 513 | NR == 0 {printf "$${srcdir}/" $$0;} \ |
| 514 | NR != 0 {printf "\\\n" "$${srcdir}/" $$0} \ |
| 515 | END {printf "\n\n"}' >>alldeps.mak; |
| 516 | sort <allparam2.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \ |
| 517 | NR == 0 {printf "$${srcdir}/" $$0;} \ |
| 518 | NR != 0 {printf "\\\n" "$${srcdir}/" $$0} \ |
| 519 | END {printf "\n\n"}' >>alldeps.mak; |
| 520 | sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \ |
| 521 | NR == 0 {printf "$${srcdir}/" $$0;} \ |
| 522 | NR != 0 {printf "\\\n" "$${srcdir}/" $$0} \ |
| 523 | END {printf "\n\n"}' >>alldeps.mak; |
| 524 | echo '# End of "alldeps.mak" definitions' >>alldeps.mak; |
| 525 | rm -f alldeps*.tmp allparam*.tmp allconfig*.tmp |
| 526 | |
| 527 | # The sed script makes everything which depends on {x,t}m.h depend on |
| 528 | # config.status as well, in case someone reconfigures gdb out from |
| 529 | # under an already compiled gdb. |
| 530 | depend: $(SOURCES) Makefile.in |
| 531 | @echo Ignore errors about non-existent system-supplied include files |
| 532 | @echo for systems other than the one you are using. |
| 533 | @echo Also ignore any errors in arm-convert.s. |
| 534 | -$(GCC) -MM -nostdinc -I/usr/include $(CFLAGS) -I$(BFD_DIR) \ |
| 535 | -I${READLINE_DIR} $(INCLUDE_CFLAGS) \ |
| 536 | `ls $(SOURCES) | grep -v '\.[hy]$$' | \ |
| 537 | sort -u` >depend.tmp |
| 538 | # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except |
| 539 | # for xm.h, tm.h and nm.h. This allows the same "depend" file to be used |
| 540 | # by the various subdirectories. |
| 541 | if [ "${srcdir}" = "." ] ; then \ |
| 542 | <depend.tmp sed \ |
| 543 | -e 's; ./xm.h; xm.h;g' \ |
| 544 | -e 's; ./tm.h; tm.h;g' \ |
| 545 | -e 's; ./nm.h; nm.h;g' \ |
| 546 | -e 's; \./; $${srcdir}/;g' \ |
| 547 | -e 's; vx-share/; $${srcdir}/vx-share/;g' \ |
| 548 | -e 's; nindy-share/; $${srcdir}/nindy-share/;g' \ |
| 549 | -e 's; 29k-share/; $${srcdir}/29k-share/;g' \ |
| 550 | >depend.tm2; \ |
| 551 | rm depend.tmp; \ |
| 552 | mv depend.tm2 depend.tmp; \ |
| 553 | fi |
| 554 | <depend.tmp sed \ |
| 555 | -e 's; [xt]m.h;& config.status;g' \ |
| 556 | -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \ |
| 557 | -e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \ |
| 558 | -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \ |
| 559 | -e 's; ./xm.h; xm.h config.status;g' \ |
| 560 | -e 's; ./tm.h; tm.h config.status;g' \ |
| 561 | -e 's; ./nm.h; nm.h config.status;g' \ |
| 562 | >depend |
| 563 | rm depend.tmp |
| 564 | |
| 565 | config.status: |
| 566 | @echo "You must configure gdb. Look at the README file for details." |
| 567 | @false |
| 568 | |
| 569 | # This checks the configure.in file versus the config/ directory. |
| 570 | config-check: config-check-hosts config-check-targets |
| 571 | config-check-hosts: |
| 572 | grep gdb_host= ${srcdir}/configure.in | \ |
| 573 | sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o |
| 574 | (cd ${srcdir}/config; ls *.mh) >HOSTdir.o |
| 575 | diff -u HOSTconf.o HOSTdir.o |
| 576 | |
| 577 | config-check-targets: |
| 578 | grep gdb_target= ${srcdir}/configure.in | \ |
| 579 | sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o |
| 580 | (cd ${srcdir}/config; ls *.mt) >TARGdir.o |
| 581 | diff -u HOSTconf.o HOSTdir.o |
| 582 | |
| 583 | # These are not generated by "make depend" because they only are there |
| 584 | # for some machines. |
| 585 | # But these rules don't do what we want; we want to hack the foo.o: tm.h |
| 586 | # dependency to do the right thing. |
| 587 | tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-m68k.h |
| 588 | tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-m68k.h |
| 589 | xm-news1000.h: xm-news.h |
| 590 | xm-i386-sv32.h: xm-i386.h |
| 591 | tm-i386gas.h: tm-i386.h |
| 592 | xm-sun4os4.h: xm-sparc.h |
| 593 | tm-sun4os4.h: tm-sparc.h |
| 594 | xm-vaxult.h: xm-vax.h |
| 595 | xm-vaxbsd.h: xm-vax.h |
| 596 | |
| 597 | kdb: $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS} |
| 598 | rm -f init.c |
| 599 | $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c |
| 600 | $(CC) $(LDFLAGS) -c init.c $(CLIBS) |
| 601 | ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \ |
| 602 | -lc $(CLIBS) |
| 603 | |
| 604 | # Put the proper machine-specific files first. |
| 605 | TAGS: ${TAGFILES} |
| 606 | etags `find ${srcdir}/config -name $(TM_FILE) -print` \ |
| 607 | `find ${srcdir}/config -name ${XM_FILE} -print` \ |
| 608 | `find ${srcdir}/config -name ${NAT_FILE} -print` \ |
| 609 | `for i in ${DEPFILES}; do \ |
| 610 | echo ${srcdir}/$$i | sed -e 's/\.o$$/\.c/' ;\ |
| 611 | done` \ |
| 612 | ${TAGFILES} |
| 613 | tags: TAGS |
| 614 | |
| 615 | # Making distributions of GDB and friends. |
| 616 | |
| 617 | # Make a tar file containing the GDB directory of the distribution. |
| 618 | gdb.tar.Z: force_update |
| 619 | $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist |
| 620 | $(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z |
| 621 | |
| 622 | # Make a directory `proto-gdb.dir' that contains an image of the GDB |
| 623 | # directory of the distribution, built up with symlinks. Note that this |
| 624 | # make target is not directly referenced by any other rules in this makefile, |
| 625 | # it is referenced by the makefile in the parent directory. |
| 626 | make-proto-gdb.dir: force_update |
| 627 | $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist |
| 628 | $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 |
| 629 | |
| 630 | # Set up the GDB source directory for distribution, by building all files that |
| 631 | # are products of other files. |
| 632 | setup-to-dist: update-depend force_update |
| 633 | ../configure none |
| 634 | (cd doc; $(MAKE) $(MFLAGS) GDBvn.texi) |
| 635 | $(MAKE) $(MFLAGS) gdb.info |
| 636 | $(MAKE) $(MFLAGS) refcard.ps |
| 637 | |
| 638 | # Update the "depend" and "alldeps.mak" files in a source directory. |
| 639 | # We update alldeps.mak first, since it is used to generate the list |
| 640 | # of files to be checked for dependencies. |
| 641 | update-depend: update-alldeps force_update |
| 642 | ../configure none -norecursion |
| 643 | rm -f depend |
| 644 | $(MAKE) $(MFLAGS) depend |
| 645 | |
| 646 | # Update the "alldeps.mak" file in a source directory. |
| 647 | update-alldeps: force_update |
| 648 | ../configure none -norecursion |
| 649 | rm -f alldeps.mak |
| 650 | $(MAKE) $(MFLAGS) alldeps.mak |
| 651 | |
| 652 | # Build a tar file from a proto-gdb.dir. |
| 653 | gdb-$(VERSION).tar.Z: force_update |
| 654 | rm -f gdb.tar gdb-$(VERSION).tar.Z |
| 655 | $(MAKE) $(MFLAGS) -f Makefile make-proto-gdb-1 |
| 656 | ln -s proto-gdb.dir $(DIST) |
| 657 | tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z |
| 658 | rm -rf $(DIST) proto-gdb.dir |
| 659 | |
| 660 | # Build a proto-gdb.dir after GDB has been set up for distribution. |
| 661 | # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile |
| 662 | # built in the setup-to-dist process, since it defines things like ALLCONFIG |
| 663 | # and ALLDEPFILES, that we need. |
| 664 | make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info |
| 665 | rm -rf proto-gdb.dir |
| 666 | mkdir proto-gdb.dir |
| 667 | rootme=`pwd`/ ; export rootme ; \ |
| 668 | for i in `echo ${TARDIRS}`; do \ |
| 669 | (cd proto-gdb.dir ; \ |
| 670 | mkdir -p $$i; \ |
| 671 | cd $$i; \ |
| 672 | ln -s $${rootme}/$$i/* .; \ |
| 673 | rm -rf SCCS CVS CVS.adm RCS config.status; \ |
| 674 | if test -f Makefile.in; then rm Makefile; else true; fi;); \ |
| 675 | done ; \ |
| 676 | for i in `echo ${TARFILES}`; do \ |
| 677 | (cd proto-gdb.dir ; \ |
| 678 | dir=`dirname $$i`; \ |
| 679 | if test -d $$dir; then true; else mkdir -p $$dir; fi; \ |
| 680 | ln -s $${rootme}/$$i $$i;); \ |
| 681 | done |
| 682 | chmod og=u `find . -print` |
| 683 | |
| 684 | clean: |
| 685 | @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do |
| 686 | rm -f *.o ${ADD_FILES} *~ |
| 687 | rm -f init.c version.c |
| 688 | rm -f gdb core make.log |
| 689 | rm -f gdb[0-9] |
| 690 | |
| 691 | distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS |
| 692 | @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do |
| 693 | rm -f tm.h xm.h config.status |
| 694 | rm -f y.output yacc.acts yacc.tmp |
| 695 | rm -f ${TESTS} Makefile depend |
| 696 | |
| 697 | realclean: clean |
| 698 | @$(MAKE) $(FLAGS_TO_PASS) DO=realclean "DODIRS=$(SUBDIRS)" subdir_do |
| 699 | rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS |
| 700 | rm -f tm.h xm.h config.status |
| 701 | rm -f Makefile depend |
| 702 | |
| 703 | STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb |
| 704 | |
| 705 | subdir_do: force |
| 706 | @for i in $(DODIRS); do \ |
| 707 | if [ -d ./$$i ] ; then \ |
| 708 | if (cd ./$$i; \ |
| 709 | $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \ |
| 710 | else exit 1 ; fi ; \ |
| 711 | else true ; fi ; \ |
| 712 | done |
| 713 | |
| 714 | Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) |
| 715 | $(SHELL) ./config.status |
| 716 | |
| 717 | force: |
| 718 | |
| 719 | # Documentation! |
| 720 | # GDB QUICK REFERENCE (TeX dvi file, CM fonts) |
| 721 | refcard.dvi: |
| 722 | ( cd ./doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS) ) |
| 723 | mv ./doc/refcard.dvi . |
| 724 | |
| 725 | # GDB QUICK REFERENCE (PostScript output, common PS fonts) |
| 726 | refcard.ps: |
| 727 | ( cd ./doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS) ) |
| 728 | mv ./doc/refcard.ps . |
| 729 | |
| 730 | # GDB MANUAL: TeX dvi file |
| 731 | gdb.dvi: |
| 732 | ( cd ./doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS) ) |
| 733 | mv ./doc/gdb.dvi . |
| 734 | |
| 735 | # GDB MANUAL: info file |
| 736 | gdb.info: |
| 737 | ( cd ./doc; $(MAKE) gdb.info $(FLAGS_TO_PASS) ) |
| 738 | mv ./doc/gdb.info* . |
| 739 | |
| 740 | # Make copying.c from COPYING |
| 741 | copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk |
| 742 | awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c |
| 743 | |
| 744 | version.c: Makefile |
| 745 | echo 'char *version = "$(VERSION)";' >version.c |
| 746 | |
| 747 | # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist |
| 748 | # in srcdir, then compiled in target dir to c-exp.tab.o. |
| 749 | # ././c-exp.tab.c is so the command argument will never match $(srcdir)/c-exp.y |
| 750 | # (some "makes" rewrite the VPATH into command arguments if they match deps). |
| 751 | # Remove bogus decls for malloc/realloc/free which conflict with everything |
| 752 | # else. |
| 753 | c-exp.tab.o: c-exp.tab.c |
| 754 | c-exp.tab.c: $(srcdir)/c-exp.y $(srcdir)/Makefile.in |
| 755 | @echo 'Expect 4 shift/reduce conflicts.' |
| 756 | ${YACC} ${YFLAGS} $(srcdir)/c-exp.y |
| 757 | -sed -e '/extern.*malloc/d' \ |
| 758 | -e '/extern.*realloc/d' \ |
| 759 | -e '/extern.*free/d' \ |
| 760 | -e '/include.*malloc.h/d' \ |
| 761 | -e 's/malloc/xmalloc/g' \ |
| 762 | -e 's/realloc/xrealloc/g' \ |
| 763 | < y.tab.c > ././c-exp.tab.c |
| 764 | -rm y.tab.c |
| 765 | |
| 766 | # ch-exp.tab.c is generated in target dir from ch-exp.y if it doesn't exist |
| 767 | # in srcdir, then compiled in target dir to ch-exp.tab.o. |
| 768 | # Remove bogus decls for malloc/realloc/free which conflict with everything |
| 769 | # else. |
| 770 | ch-exp.tab.o: ch-exp.tab.c |
| 771 | ch-exp.tab.c: $(srcdir)/ch-exp.y $(srcdir)/Makefile.in |
| 772 | ${YACC} ${YFLAGS} $(srcdir)/ch-exp.y |
| 773 | -sed -e '/extern.*malloc/d' \ |
| 774 | -e '/extern.*realloc/d' \ |
| 775 | -e '/extern.*free/d' \ |
| 776 | -e '/include.*malloc.h/d' \ |
| 777 | -e 's/malloc/xmalloc/g' \ |
| 778 | -e 's/realloc/xrealloc/g' \ |
| 779 | < y.tab.c > ././ch-exp.tab.c |
| 780 | -rm y.tab.c |
| 781 | |
| 782 | # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist |
| 783 | # in srcdir, then compiled in target dir to m2-exp.tab.o. |
| 784 | # Remove bogus decls for malloc/realloc/free which conflict with everything |
| 785 | # else. |
| 786 | m2-exp.tab.o: m2-exp.tab.c |
| 787 | m2-exp.tab.c: $(srcdir)/m2-exp.y $(srcdir)/Makefile.in |
| 788 | ${YACC} ${YFLAGS} $(srcdir)/m2-exp.y |
| 789 | -sed -e '/extern.*malloc/d' \ |
| 790 | -e '/extern.*realloc/d' \ |
| 791 | -e '/extern.*free/d' \ |
| 792 | -e '/include.*malloc.h/d' \ |
| 793 | -e 's/malloc/xmalloc/g' \ |
| 794 | -e 's/realloc/xrealloc/g' \ |
| 795 | < y.tab.c > ././m2-exp.tab.c |
| 796 | -rm y.tab.c |
| 797 | |
| 798 | |
| 799 | main.o: ${srcdir}/main.c |
| 800 | ${CC} -c ${INTERNAL_CFLAGS} -I${READLINE_DIR} $< |
| 801 | |
| 802 | # The symbol-file readers have dependencies on BFD header files. |
| 803 | dbxread.o: ${srcdir}/dbxread.c |
| 804 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c |
| 805 | |
| 806 | coffread.o: ${srcdir}/coffread.c |
| 807 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c |
| 808 | |
| 809 | mipsread.o: ${srcdir}/mipsread.c |
| 810 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c |
| 811 | |
| 812 | elfread.o: ${srcdir}/elfread.c |
| 813 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c |
| 814 | |
| 815 | dwarfread.o: ${srcdir}/dwarfread.c |
| 816 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/dwarfread.c |
| 817 | |
| 818 | stabsread.o: ${srcdir}/stabsread.c |
| 819 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/stabsread.c |
| 820 | |
| 821 | # Used on RS/6000 native |
| 822 | xcoffread.o: ${srcdir}/xcoffread.c |
| 823 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c |
| 824 | |
| 825 | xcoffexec.o: ${srcdir}/xcoffexec.c |
| 826 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c |
| 827 | |
| 828 | # Used on HP-PA native |
| 829 | paread.o: ${srcdir}/paread.c |
| 830 | ${CC} -c ${INTERNAL_CFLAGS} -I$(BFD_DIR) ${srcdir}/paread.c |
| 831 | |
| 832 | # Drag in the files that are in another directory. |
| 833 | |
| 834 | xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c |
| 835 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ld.c |
| 836 | |
| 837 | xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c |
| 838 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c |
| 839 | |
| 840 | xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c |
| 841 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/vx-share/xdr_rdb.c |
| 842 | |
| 843 | nindy.o: ${srcdir}/nindy-share/nindy.c |
| 844 | ${CC} -c ${INTERNAL_CFLAGS} -DSTRIP='"$(tooldir)/bin/strip"' \ |
| 845 | ${srcdir}/nindy-share/nindy.c |
| 846 | |
| 847 | Onindy.o: ${srcdir}/nindy-share/Onindy.c |
| 848 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/Onindy.c |
| 849 | |
| 850 | ttybreak.o: ${srcdir}/nindy-share/ttybreak.c |
| 851 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttybreak.c |
| 852 | |
| 853 | ttyflush.o: ${srcdir}/nindy-share/ttyflush.c |
| 854 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/nindy-share/ttyflush.c |
| 855 | |
| 856 | udr.o: ${srcdir}/29k-share/udi/udr.c |
| 857 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udr.c |
| 858 | |
| 859 | udip2soc.o: ${srcdir}/29k-share/udi/udip2soc.c |
| 860 | ${CC} -c ${INTERNAL_CFLAGS} ${srcdir}/29k-share/udi/udip2soc.c |
| 861 | |
| 862 | lint: $(LINTFILES) |
| 863 | $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \ |
| 864 | `echo ${DEPFILES} | sed 's/\.o /\.c /g' |
| 865 | |
| 866 | gdb.cxref: $(SFILES) |
| 867 | cxref -I. $(SFILES) >gdb.cxref |
| 868 | |
| 869 | force_update: |
| 870 | |
| 871 | # GNU Make has an annoying habit of putting *all* the Makefile variables |
| 872 | # into the environment, unless you include this target as a circumvention. |
| 873 | # Rumor is that this will be fixed (and this target can be removed) |
| 874 | # in GNU Make 4.0. |
| 875 | .NOEXPORT: |
| 876 | |
| 877 | # GNU Make 3.63 has a different problem: it keeps tacking command line |
| 878 | # overrides onto the definition of $(MAKE). This variable setting |
| 879 | # will remove them. |
| 880 | MAKEOVERRIDES= |
| 881 | |
| 882 | ## This is ugly, but I don't want GNU make to put these variables in |
| 883 | ## the environment. Older makes will see this as a set of targets |
| 884 | ## with no dependencies and no actions. |
| 885 | unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET : |
| 886 | |
| 887 | # This is the end of "Makefile.in". When built into "Makefile" |
| 888 | # by the configure script, two things are added below this point: |
| 889 | # alldeps.mak -- defintions of all files that are used in |
| 890 | # host- or target-dependent configurations |
| 891 | # depend -- what .o files depend on what .c and .h files, |
| 892 | # for all configurations. |