| 1 | /* Support routines for building symbol tables in GDB's internal format. |
| 2 | Copyright (C) 1986-2015 Free Software Foundation, Inc. |
| 3 | |
| 4 | This file is part of GDB. |
| 5 | |
| 6 | This program is free software; you can redistribute it and/or modify |
| 7 | it under the terms of the GNU General Public License as published by |
| 8 | the Free Software Foundation; either version 3 of the License, or |
| 9 | (at your option) any later version. |
| 10 | |
| 11 | This program is distributed in the hope that it will be useful, |
| 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | GNU General Public License for more details. |
| 15 | |
| 16 | You should have received a copy of the GNU General Public License |
| 17 | along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| 18 | |
| 19 | /* This module provides subroutines used for creating and adding to |
| 20 | the symbol table. These routines are called from various symbol- |
| 21 | file-reading routines. |
| 22 | |
| 23 | Routines to support specific debugging information formats (stabs, |
| 24 | DWARF, etc) belong somewhere else. |
| 25 | |
| 26 | The basic way this module is used is as follows: |
| 27 | |
| 28 | buildsym_init (); |
| 29 | cleanups = make_cleanup (really_free_pendings, NULL); |
| 30 | cust = start_symtab (...); |
| 31 | ... read debug info ... |
| 32 | cust = end_symtab (...); |
| 33 | do_cleanups (cleanups); |
| 34 | |
| 35 | The compunit symtab pointer ("cust") is returned from both start_symtab |
| 36 | and end_symtab to simplify the debug info readers. |
| 37 | |
| 38 | There are minor variations on this, e.g., dwarf2read.c splits end_symtab |
| 39 | into two calls: end_symtab_get_static_block, end_symtab_from_static_block, |
| 40 | but all debug info readers follow this basic flow. |
| 41 | |
| 42 | Reading DWARF Type Units is another variation: |
| 43 | |
| 44 | buildsym_init (); |
| 45 | cleanups = make_cleanup (really_free_pendings, NULL); |
| 46 | cust = start_symtab (...); |
| 47 | ... read debug info ... |
| 48 | cust = end_expandable_symtab (...); |
| 49 | do_cleanups (cleanups); |
| 50 | |
| 51 | And then reading subsequent Type Units within the containing "Comp Unit" |
| 52 | will use a second flow: |
| 53 | |
| 54 | buildsym_init (); |
| 55 | cleanups = make_cleanup (really_free_pendings, NULL); |
| 56 | cust = restart_symtab (...); |
| 57 | ... read debug info ... |
| 58 | cust = augment_type_symtab (...); |
| 59 | do_cleanups (cleanups); |
| 60 | |
| 61 | dbxread.c and xcoffread.c use another variation: |
| 62 | |
| 63 | buildsym_init (); |
| 64 | cleanups = make_cleanup (really_free_pendings, NULL); |
| 65 | cust = start_symtab (...); |
| 66 | ... read debug info ... |
| 67 | cust = end_symtab (...); |
| 68 | ... start_symtab + read + end_symtab repeated ... |
| 69 | do_cleanups (cleanups); |
| 70 | */ |
| 71 | |
| 72 | #include "defs.h" |
| 73 | #include "bfd.h" |
| 74 | #include "gdb_obstack.h" |
| 75 | #include "symtab.h" |
| 76 | #include "symfile.h" |
| 77 | #include "objfiles.h" |
| 78 | #include "gdbtypes.h" |
| 79 | #include "complaints.h" |
| 80 | #include "expression.h" /* For "enum exp_opcode" used by... */ |
| 81 | #include "bcache.h" |
| 82 | #include "filenames.h" /* For DOSish file names. */ |
| 83 | #include "macrotab.h" |
| 84 | #include "demangle.h" /* Needed by SYMBOL_INIT_DEMANGLED_NAME. */ |
| 85 | #include "block.h" |
| 86 | #include "cp-support.h" |
| 87 | #include "dictionary.h" |
| 88 | #include "addrmap.h" |
| 89 | |
| 90 | /* Ask buildsym.h to define the vars it normally declares `extern'. */ |
| 91 | #define EXTERN |
| 92 | /**/ |
| 93 | #include "buildsym.h" /* Our own declarations. */ |
| 94 | #undef EXTERN |
| 95 | |
| 96 | /* For cleanup_undefined_stabs_types and finish_global_stabs (somewhat |
| 97 | questionable--see comment where we call them). */ |
| 98 | |
| 99 | #include "stabsread.h" |
| 100 | |
| 101 | /* Buildsym's counterpart to struct compunit_symtab. |
| 102 | TODO(dje): Move all related global state into here. */ |
| 103 | |
| 104 | struct buildsym_compunit |
| 105 | { |
| 106 | /* The objfile we're reading debug info from. */ |
| 107 | struct objfile *objfile; |
| 108 | |
| 109 | /* List of subfiles (source files). |
| 110 | Files are added to the front of the list. |
| 111 | This is important mostly for the language determination hacks we use, |
| 112 | which iterate over previously added files. */ |
| 113 | struct subfile *subfiles; |
| 114 | |
| 115 | /* The subfile of the main source file. */ |
| 116 | struct subfile *main_subfile; |
| 117 | |
| 118 | /* E.g., DW_AT_comp_dir if DWARF. Space for this is malloc'd. */ |
| 119 | char *comp_dir; |
| 120 | |
| 121 | /* Space for this is not malloc'd, and is assumed to have at least |
| 122 | the same lifetime as objfile. */ |
| 123 | const char *producer; |
| 124 | |
| 125 | /* Space for this is not malloc'd, and is assumed to have at least |
| 126 | the same lifetime as objfile. */ |
| 127 | const char *debugformat; |
| 128 | |
| 129 | /* The compunit we are building. */ |
| 130 | struct compunit_symtab *compunit_symtab; |
| 131 | }; |
| 132 | |
| 133 | /* The work-in-progress of the compunit we are building. |
| 134 | This is created first, before any subfiles by start_symtab. */ |
| 135 | |
| 136 | static struct buildsym_compunit *buildsym_compunit; |
| 137 | |
| 138 | /* List of free `struct pending' structures for reuse. */ |
| 139 | |
| 140 | static struct pending *free_pendings; |
| 141 | |
| 142 | /* Non-zero if symtab has line number info. This prevents an |
| 143 | otherwise empty symtab from being tossed. */ |
| 144 | |
| 145 | static int have_line_numbers; |
| 146 | |
| 147 | /* The mutable address map for the compilation unit whose symbols |
| 148 | we're currently reading. The symtabs' shared blockvector will |
| 149 | point to a fixed copy of this. */ |
| 150 | static struct addrmap *pending_addrmap; |
| 151 | |
| 152 | /* The obstack on which we allocate pending_addrmap. |
| 153 | If pending_addrmap is NULL, this is uninitialized; otherwise, it is |
| 154 | initialized (and holds pending_addrmap). */ |
| 155 | static struct obstack pending_addrmap_obstack; |
| 156 | |
| 157 | /* Non-zero if we recorded any ranges in the addrmap that are |
| 158 | different from those in the blockvector already. We set this to |
| 159 | zero when we start processing a symfile, and if it's still zero at |
| 160 | the end, then we just toss the addrmap. */ |
| 161 | static int pending_addrmap_interesting; |
| 162 | |
| 163 | /* An obstack used for allocating pending blocks. */ |
| 164 | |
| 165 | static struct obstack pending_block_obstack; |
| 166 | |
| 167 | /* List of blocks already made (lexical contexts already closed). |
| 168 | This is used at the end to make the blockvector. */ |
| 169 | |
| 170 | struct pending_block |
| 171 | { |
| 172 | struct pending_block *next; |
| 173 | struct block *block; |
| 174 | }; |
| 175 | |
| 176 | /* Pointer to the head of a linked list of symbol blocks which have |
| 177 | already been finalized (lexical contexts already closed) and which |
| 178 | are just waiting to be built into a blockvector when finalizing the |
| 179 | associated symtab. */ |
| 180 | |
| 181 | static struct pending_block *pending_blocks; |
| 182 | |
| 183 | struct subfile_stack |
| 184 | { |
| 185 | struct subfile_stack *next; |
| 186 | char *name; |
| 187 | }; |
| 188 | |
| 189 | static struct subfile_stack *subfile_stack; |
| 190 | |
| 191 | /* The macro table for the compilation unit whose symbols we're |
| 192 | currently reading. */ |
| 193 | static struct macro_table *pending_macros; |
| 194 | |
| 195 | static void free_buildsym_compunit (void); |
| 196 | |
| 197 | static int compare_line_numbers (const void *ln1p, const void *ln2p); |
| 198 | |
| 199 | static void record_pending_block (struct objfile *objfile, |
| 200 | struct block *block, |
| 201 | struct pending_block *opblock); |
| 202 | |
| 203 | /* Initial sizes of data structures. These are realloc'd larger if |
| 204 | needed, and realloc'd down to the size actually used, when |
| 205 | completed. */ |
| 206 | |
| 207 | #define INITIAL_CONTEXT_STACK_SIZE 10 |
| 208 | #define INITIAL_LINE_VECTOR_LENGTH 1000 |
| 209 | \f |
| 210 | |
| 211 | /* Maintain the lists of symbols and blocks. */ |
| 212 | |
| 213 | /* Add a symbol to one of the lists of symbols. */ |
| 214 | |
| 215 | void |
| 216 | add_symbol_to_list (struct symbol *symbol, struct pending **listhead) |
| 217 | { |
| 218 | struct pending *link; |
| 219 | |
| 220 | /* If this is an alias for another symbol, don't add it. */ |
| 221 | if (symbol->ginfo.name && symbol->ginfo.name[0] == '#') |
| 222 | return; |
| 223 | |
| 224 | /* We keep PENDINGSIZE symbols in each link of the list. If we |
| 225 | don't have a link with room in it, add a new link. */ |
| 226 | if (*listhead == NULL || (*listhead)->nsyms == PENDINGSIZE) |
| 227 | { |
| 228 | if (free_pendings) |
| 229 | { |
| 230 | link = free_pendings; |
| 231 | free_pendings = link->next; |
| 232 | } |
| 233 | else |
| 234 | { |
| 235 | link = XNEW (struct pending); |
| 236 | } |
| 237 | |
| 238 | link->next = *listhead; |
| 239 | *listhead = link; |
| 240 | link->nsyms = 0; |
| 241 | } |
| 242 | |
| 243 | (*listhead)->symbol[(*listhead)->nsyms++] = symbol; |
| 244 | } |
| 245 | |
| 246 | /* Find a symbol named NAME on a LIST. NAME need not be |
| 247 | '\0'-terminated; LENGTH is the length of the name. */ |
| 248 | |
| 249 | struct symbol * |
| 250 | find_symbol_in_list (struct pending *list, char *name, int length) |
| 251 | { |
| 252 | int j; |
| 253 | const char *pp; |
| 254 | |
| 255 | while (list != NULL) |
| 256 | { |
| 257 | for (j = list->nsyms; --j >= 0;) |
| 258 | { |
| 259 | pp = SYMBOL_LINKAGE_NAME (list->symbol[j]); |
| 260 | if (*pp == *name && strncmp (pp, name, length) == 0 |
| 261 | && pp[length] == '\0') |
| 262 | { |
| 263 | return (list->symbol[j]); |
| 264 | } |
| 265 | } |
| 266 | list = list->next; |
| 267 | } |
| 268 | return (NULL); |
| 269 | } |
| 270 | |
| 271 | /* At end of reading syms, or in case of quit, ensure everything associated |
| 272 | with building symtabs is freed. This is intended to be registered as a |
| 273 | cleanup before doing psymtab->symtab expansion. |
| 274 | |
| 275 | N.B. This is *not* intended to be used when building psymtabs. Some debug |
| 276 | info readers call this anyway, which is harmless if confusing. */ |
| 277 | |
| 278 | void |
| 279 | really_free_pendings (void *dummy) |
| 280 | { |
| 281 | struct pending *next, *next1; |
| 282 | |
| 283 | for (next = free_pendings; next; next = next1) |
| 284 | { |
| 285 | next1 = next->next; |
| 286 | xfree ((void *) next); |
| 287 | } |
| 288 | free_pendings = NULL; |
| 289 | |
| 290 | free_pending_blocks (); |
| 291 | |
| 292 | for (next = file_symbols; next != NULL; next = next1) |
| 293 | { |
| 294 | next1 = next->next; |
| 295 | xfree ((void *) next); |
| 296 | } |
| 297 | file_symbols = NULL; |
| 298 | |
| 299 | for (next = global_symbols; next != NULL; next = next1) |
| 300 | { |
| 301 | next1 = next->next; |
| 302 | xfree ((void *) next); |
| 303 | } |
| 304 | global_symbols = NULL; |
| 305 | |
| 306 | if (pending_macros) |
| 307 | free_macro_table (pending_macros); |
| 308 | pending_macros = NULL; |
| 309 | |
| 310 | if (pending_addrmap) |
| 311 | obstack_free (&pending_addrmap_obstack, NULL); |
| 312 | pending_addrmap = NULL; |
| 313 | |
| 314 | free_buildsym_compunit (); |
| 315 | } |
| 316 | |
| 317 | /* This function is called to discard any pending blocks. */ |
| 318 | |
| 319 | void |
| 320 | free_pending_blocks (void) |
| 321 | { |
| 322 | if (pending_blocks != NULL) |
| 323 | { |
| 324 | obstack_free (&pending_block_obstack, NULL); |
| 325 | pending_blocks = NULL; |
| 326 | } |
| 327 | } |
| 328 | |
| 329 | /* Take one of the lists of symbols and make a block from it. Keep |
| 330 | the order the symbols have in the list (reversed from the input |
| 331 | file). Put the block on the list of pending blocks. */ |
| 332 | |
| 333 | static struct block * |
| 334 | finish_block_internal (struct symbol *symbol, |
| 335 | struct pending **listhead, |
| 336 | struct pending_block *old_blocks, |
| 337 | const struct dynamic_prop *static_link, |
| 338 | CORE_ADDR start, CORE_ADDR end, |
| 339 | int is_global, int expandable) |
| 340 | { |
| 341 | struct objfile *objfile = buildsym_compunit->objfile; |
| 342 | struct gdbarch *gdbarch = get_objfile_arch (objfile); |
| 343 | struct pending *next, *next1; |
| 344 | struct block *block; |
| 345 | struct pending_block *pblock; |
| 346 | struct pending_block *opblock; |
| 347 | |
| 348 | block = (is_global |
| 349 | ? allocate_global_block (&objfile->objfile_obstack) |
| 350 | : allocate_block (&objfile->objfile_obstack)); |
| 351 | |
| 352 | if (symbol) |
| 353 | { |
| 354 | BLOCK_DICT (block) = dict_create_linear (&objfile->objfile_obstack, |
| 355 | *listhead); |
| 356 | } |
| 357 | else |
| 358 | { |
| 359 | if (expandable) |
| 360 | { |
| 361 | BLOCK_DICT (block) = dict_create_hashed_expandable (); |
| 362 | dict_add_pending (BLOCK_DICT (block), *listhead); |
| 363 | } |
| 364 | else |
| 365 | { |
| 366 | BLOCK_DICT (block) = |
| 367 | dict_create_hashed (&objfile->objfile_obstack, *listhead); |
| 368 | } |
| 369 | } |
| 370 | |
| 371 | BLOCK_START (block) = start; |
| 372 | BLOCK_END (block) = end; |
| 373 | |
| 374 | /* Put the block in as the value of the symbol that names it. */ |
| 375 | |
| 376 | if (symbol) |
| 377 | { |
| 378 | struct type *ftype = SYMBOL_TYPE (symbol); |
| 379 | struct dict_iterator iter; |
| 380 | SYMBOL_BLOCK_VALUE (symbol) = block; |
| 381 | BLOCK_FUNCTION (block) = symbol; |
| 382 | |
| 383 | if (TYPE_NFIELDS (ftype) <= 0) |
| 384 | { |
| 385 | /* No parameter type information is recorded with the |
| 386 | function's type. Set that from the type of the |
| 387 | parameter symbols. */ |
| 388 | int nparams = 0, iparams; |
| 389 | struct symbol *sym; |
| 390 | |
| 391 | /* Here we want to directly access the dictionary, because |
| 392 | we haven't fully initialized the block yet. */ |
| 393 | ALL_DICT_SYMBOLS (BLOCK_DICT (block), iter, sym) |
| 394 | { |
| 395 | if (SYMBOL_IS_ARGUMENT (sym)) |
| 396 | nparams++; |
| 397 | } |
| 398 | if (nparams > 0) |
| 399 | { |
| 400 | TYPE_NFIELDS (ftype) = nparams; |
| 401 | TYPE_FIELDS (ftype) = (struct field *) |
| 402 | TYPE_ALLOC (ftype, nparams * sizeof (struct field)); |
| 403 | |
| 404 | iparams = 0; |
| 405 | /* Here we want to directly access the dictionary, because |
| 406 | we haven't fully initialized the block yet. */ |
| 407 | ALL_DICT_SYMBOLS (BLOCK_DICT (block), iter, sym) |
| 408 | { |
| 409 | if (iparams == nparams) |
| 410 | break; |
| 411 | |
| 412 | if (SYMBOL_IS_ARGUMENT (sym)) |
| 413 | { |
| 414 | TYPE_FIELD_TYPE (ftype, iparams) = SYMBOL_TYPE (sym); |
| 415 | TYPE_FIELD_ARTIFICIAL (ftype, iparams) = 0; |
| 416 | iparams++; |
| 417 | } |
| 418 | } |
| 419 | } |
| 420 | } |
| 421 | } |
| 422 | else |
| 423 | { |
| 424 | BLOCK_FUNCTION (block) = NULL; |
| 425 | } |
| 426 | |
| 427 | if (static_link != NULL) |
| 428 | objfile_register_static_link (objfile, block, static_link); |
| 429 | |
| 430 | /* Now "free" the links of the list, and empty the list. */ |
| 431 | |
| 432 | for (next = *listhead; next; next = next1) |
| 433 | { |
| 434 | next1 = next->next; |
| 435 | next->next = free_pendings; |
| 436 | free_pendings = next; |
| 437 | } |
| 438 | *listhead = NULL; |
| 439 | |
| 440 | /* Check to be sure that the blocks have an end address that is |
| 441 | greater than starting address. */ |
| 442 | |
| 443 | if (BLOCK_END (block) < BLOCK_START (block)) |
| 444 | { |
| 445 | if (symbol) |
| 446 | { |
| 447 | complaint (&symfile_complaints, |
| 448 | _("block end address less than block " |
| 449 | "start address in %s (patched it)"), |
| 450 | SYMBOL_PRINT_NAME (symbol)); |
| 451 | } |
| 452 | else |
| 453 | { |
| 454 | complaint (&symfile_complaints, |
| 455 | _("block end address %s less than block " |
| 456 | "start address %s (patched it)"), |
| 457 | paddress (gdbarch, BLOCK_END (block)), |
| 458 | paddress (gdbarch, BLOCK_START (block))); |
| 459 | } |
| 460 | /* Better than nothing. */ |
| 461 | BLOCK_END (block) = BLOCK_START (block); |
| 462 | } |
| 463 | |
| 464 | /* Install this block as the superblock of all blocks made since the |
| 465 | start of this scope that don't have superblocks yet. */ |
| 466 | |
| 467 | opblock = NULL; |
| 468 | for (pblock = pending_blocks; |
| 469 | pblock && pblock != old_blocks; |
| 470 | pblock = pblock->next) |
| 471 | { |
| 472 | if (BLOCK_SUPERBLOCK (pblock->block) == NULL) |
| 473 | { |
| 474 | /* Check to be sure the blocks are nested as we receive |
| 475 | them. If the compiler/assembler/linker work, this just |
| 476 | burns a small amount of time. |
| 477 | |
| 478 | Skip blocks which correspond to a function; they're not |
| 479 | physically nested inside this other blocks, only |
| 480 | lexically nested. */ |
| 481 | if (BLOCK_FUNCTION (pblock->block) == NULL |
| 482 | && (BLOCK_START (pblock->block) < BLOCK_START (block) |
| 483 | || BLOCK_END (pblock->block) > BLOCK_END (block))) |
| 484 | { |
| 485 | if (symbol) |
| 486 | { |
| 487 | complaint (&symfile_complaints, |
| 488 | _("inner block not inside outer block in %s"), |
| 489 | SYMBOL_PRINT_NAME (symbol)); |
| 490 | } |
| 491 | else |
| 492 | { |
| 493 | complaint (&symfile_complaints, |
| 494 | _("inner block (%s-%s) not " |
| 495 | "inside outer block (%s-%s)"), |
| 496 | paddress (gdbarch, BLOCK_START (pblock->block)), |
| 497 | paddress (gdbarch, BLOCK_END (pblock->block)), |
| 498 | paddress (gdbarch, BLOCK_START (block)), |
| 499 | paddress (gdbarch, BLOCK_END (block))); |
| 500 | } |
| 501 | if (BLOCK_START (pblock->block) < BLOCK_START (block)) |
| 502 | BLOCK_START (pblock->block) = BLOCK_START (block); |
| 503 | if (BLOCK_END (pblock->block) > BLOCK_END (block)) |
| 504 | BLOCK_END (pblock->block) = BLOCK_END (block); |
| 505 | } |
| 506 | BLOCK_SUPERBLOCK (pblock->block) = block; |
| 507 | } |
| 508 | opblock = pblock; |
| 509 | } |
| 510 | |
| 511 | block_set_using (block, |
| 512 | (is_global |
| 513 | ? global_using_directives |
| 514 | : local_using_directives), |
| 515 | &objfile->objfile_obstack); |
| 516 | if (is_global) |
| 517 | global_using_directives = NULL; |
| 518 | else |
| 519 | local_using_directives = NULL; |
| 520 | |
| 521 | record_pending_block (objfile, block, opblock); |
| 522 | |
| 523 | return block; |
| 524 | } |
| 525 | |
| 526 | struct block * |
| 527 | finish_block (struct symbol *symbol, |
| 528 | struct pending **listhead, |
| 529 | struct pending_block *old_blocks, |
| 530 | const struct dynamic_prop *static_link, |
| 531 | CORE_ADDR start, CORE_ADDR end) |
| 532 | { |
| 533 | return finish_block_internal (symbol, listhead, old_blocks, static_link, |
| 534 | start, end, 0, 0); |
| 535 | } |
| 536 | |
| 537 | /* Record BLOCK on the list of all blocks in the file. Put it after |
| 538 | OPBLOCK, or at the beginning if opblock is NULL. This puts the |
| 539 | block in the list after all its subblocks. |
| 540 | |
| 541 | Allocate the pending block struct in the objfile_obstack to save |
| 542 | time. This wastes a little space. FIXME: Is it worth it? */ |
| 543 | |
| 544 | static void |
| 545 | record_pending_block (struct objfile *objfile, struct block *block, |
| 546 | struct pending_block *opblock) |
| 547 | { |
| 548 | struct pending_block *pblock; |
| 549 | |
| 550 | if (pending_blocks == NULL) |
| 551 | obstack_init (&pending_block_obstack); |
| 552 | |
| 553 | pblock = XOBNEW (&pending_block_obstack, struct pending_block); |
| 554 | pblock->block = block; |
| 555 | if (opblock) |
| 556 | { |
| 557 | pblock->next = opblock->next; |
| 558 | opblock->next = pblock; |
| 559 | } |
| 560 | else |
| 561 | { |
| 562 | pblock->next = pending_blocks; |
| 563 | pending_blocks = pblock; |
| 564 | } |
| 565 | } |
| 566 | |
| 567 | |
| 568 | /* Record that the range of addresses from START to END_INCLUSIVE |
| 569 | (inclusive, like it says) belongs to BLOCK. BLOCK's start and end |
| 570 | addresses must be set already. You must apply this function to all |
| 571 | BLOCK's children before applying it to BLOCK. |
| 572 | |
| 573 | If a call to this function complicates the picture beyond that |
| 574 | already provided by BLOCK_START and BLOCK_END, then we create an |
| 575 | address map for the block. */ |
| 576 | void |
| 577 | record_block_range (struct block *block, |
| 578 | CORE_ADDR start, CORE_ADDR end_inclusive) |
| 579 | { |
| 580 | /* If this is any different from the range recorded in the block's |
| 581 | own BLOCK_START and BLOCK_END, then note that the address map has |
| 582 | become interesting. Note that even if this block doesn't have |
| 583 | any "interesting" ranges, some later block might, so we still |
| 584 | need to record this block in the addrmap. */ |
| 585 | if (start != BLOCK_START (block) |
| 586 | || end_inclusive + 1 != BLOCK_END (block)) |
| 587 | pending_addrmap_interesting = 1; |
| 588 | |
| 589 | if (! pending_addrmap) |
| 590 | { |
| 591 | obstack_init (&pending_addrmap_obstack); |
| 592 | pending_addrmap = addrmap_create_mutable (&pending_addrmap_obstack); |
| 593 | } |
| 594 | |
| 595 | addrmap_set_empty (pending_addrmap, start, end_inclusive, block); |
| 596 | } |
| 597 | |
| 598 | static struct blockvector * |
| 599 | make_blockvector (void) |
| 600 | { |
| 601 | struct objfile *objfile = buildsym_compunit->objfile; |
| 602 | struct pending_block *next; |
| 603 | struct blockvector *blockvector; |
| 604 | int i; |
| 605 | |
| 606 | /* Count the length of the list of blocks. */ |
| 607 | |
| 608 | for (next = pending_blocks, i = 0; next; next = next->next, i++) |
| 609 | {; |
| 610 | } |
| 611 | |
| 612 | blockvector = (struct blockvector *) |
| 613 | obstack_alloc (&objfile->objfile_obstack, |
| 614 | (sizeof (struct blockvector) |
| 615 | + (i - 1) * sizeof (struct block *))); |
| 616 | |
| 617 | /* Copy the blocks into the blockvector. This is done in reverse |
| 618 | order, which happens to put the blocks into the proper order |
| 619 | (ascending starting address). finish_block has hair to insert |
| 620 | each block into the list after its subblocks in order to make |
| 621 | sure this is true. */ |
| 622 | |
| 623 | BLOCKVECTOR_NBLOCKS (blockvector) = i; |
| 624 | for (next = pending_blocks; next; next = next->next) |
| 625 | { |
| 626 | BLOCKVECTOR_BLOCK (blockvector, --i) = next->block; |
| 627 | } |
| 628 | |
| 629 | free_pending_blocks (); |
| 630 | |
| 631 | /* If we needed an address map for this symtab, record it in the |
| 632 | blockvector. */ |
| 633 | if (pending_addrmap && pending_addrmap_interesting) |
| 634 | BLOCKVECTOR_MAP (blockvector) |
| 635 | = addrmap_create_fixed (pending_addrmap, &objfile->objfile_obstack); |
| 636 | else |
| 637 | BLOCKVECTOR_MAP (blockvector) = 0; |
| 638 | |
| 639 | /* Some compilers output blocks in the wrong order, but we depend on |
| 640 | their being in the right order so we can binary search. Check the |
| 641 | order and moan about it. |
| 642 | Note: Remember that the first two blocks are the global and static |
| 643 | blocks. We could special case that fact and begin checking at block 2. |
| 644 | To avoid making that assumption we do not. */ |
| 645 | if (BLOCKVECTOR_NBLOCKS (blockvector) > 1) |
| 646 | { |
| 647 | for (i = 1; i < BLOCKVECTOR_NBLOCKS (blockvector); i++) |
| 648 | { |
| 649 | if (BLOCK_START (BLOCKVECTOR_BLOCK (blockvector, i - 1)) |
| 650 | > BLOCK_START (BLOCKVECTOR_BLOCK (blockvector, i))) |
| 651 | { |
| 652 | CORE_ADDR start |
| 653 | = BLOCK_START (BLOCKVECTOR_BLOCK (blockvector, i)); |
| 654 | |
| 655 | complaint (&symfile_complaints, _("block at %s out of order"), |
| 656 | hex_string ((LONGEST) start)); |
| 657 | } |
| 658 | } |
| 659 | } |
| 660 | |
| 661 | return (blockvector); |
| 662 | } |
| 663 | \f |
| 664 | /* Start recording information about source code that came from an |
| 665 | included (or otherwise merged-in) source file with a different |
| 666 | name. NAME is the name of the file (cannot be NULL). */ |
| 667 | |
| 668 | void |
| 669 | start_subfile (const char *name) |
| 670 | { |
| 671 | const char *subfile_dirname; |
| 672 | struct subfile *subfile; |
| 673 | |
| 674 | gdb_assert (buildsym_compunit != NULL); |
| 675 | |
| 676 | subfile_dirname = buildsym_compunit->comp_dir; |
| 677 | |
| 678 | /* See if this subfile is already registered. */ |
| 679 | |
| 680 | for (subfile = buildsym_compunit->subfiles; subfile; subfile = subfile->next) |
| 681 | { |
| 682 | char *subfile_name; |
| 683 | |
| 684 | /* If NAME is an absolute path, and this subfile is not, then |
| 685 | attempt to create an absolute path to compare. */ |
| 686 | if (IS_ABSOLUTE_PATH (name) |
| 687 | && !IS_ABSOLUTE_PATH (subfile->name) |
| 688 | && subfile_dirname != NULL) |
| 689 | subfile_name = concat (subfile_dirname, SLASH_STRING, |
| 690 | subfile->name, (char *) NULL); |
| 691 | else |
| 692 | subfile_name = subfile->name; |
| 693 | |
| 694 | if (FILENAME_CMP (subfile_name, name) == 0) |
| 695 | { |
| 696 | current_subfile = subfile; |
| 697 | if (subfile_name != subfile->name) |
| 698 | xfree (subfile_name); |
| 699 | return; |
| 700 | } |
| 701 | if (subfile_name != subfile->name) |
| 702 | xfree (subfile_name); |
| 703 | } |
| 704 | |
| 705 | /* This subfile is not known. Add an entry for it. */ |
| 706 | |
| 707 | subfile = XNEW (struct subfile); |
| 708 | memset (subfile, 0, sizeof (struct subfile)); |
| 709 | subfile->buildsym_compunit = buildsym_compunit; |
| 710 | |
| 711 | subfile->next = buildsym_compunit->subfiles; |
| 712 | buildsym_compunit->subfiles = subfile; |
| 713 | |
| 714 | current_subfile = subfile; |
| 715 | |
| 716 | subfile->name = xstrdup (name); |
| 717 | |
| 718 | /* Initialize line-number recording for this subfile. */ |
| 719 | subfile->line_vector = NULL; |
| 720 | |
| 721 | /* Default the source language to whatever can be deduced from the |
| 722 | filename. If nothing can be deduced (such as for a C/C++ include |
| 723 | file with a ".h" extension), then inherit whatever language the |
| 724 | previous subfile had. This kludgery is necessary because there |
| 725 | is no standard way in some object formats to record the source |
| 726 | language. Also, when symtabs are allocated we try to deduce a |
| 727 | language then as well, but it is too late for us to use that |
| 728 | information while reading symbols, since symtabs aren't allocated |
| 729 | until after all the symbols have been processed for a given |
| 730 | source file. */ |
| 731 | |
| 732 | subfile->language = deduce_language_from_filename (subfile->name); |
| 733 | if (subfile->language == language_unknown |
| 734 | && subfile->next != NULL) |
| 735 | { |
| 736 | subfile->language = subfile->next->language; |
| 737 | } |
| 738 | |
| 739 | /* If the filename of this subfile ends in .C, then change the |
| 740 | language of any pending subfiles from C to C++. We also accept |
| 741 | any other C++ suffixes accepted by deduce_language_from_filename. */ |
| 742 | /* Likewise for f2c. */ |
| 743 | |
| 744 | if (subfile->name) |
| 745 | { |
| 746 | struct subfile *s; |
| 747 | enum language sublang = deduce_language_from_filename (subfile->name); |
| 748 | |
| 749 | if (sublang == language_cplus || sublang == language_fortran) |
| 750 | for (s = buildsym_compunit->subfiles; s != NULL; s = s->next) |
| 751 | if (s->language == language_c) |
| 752 | s->language = sublang; |
| 753 | } |
| 754 | |
| 755 | /* And patch up this file if necessary. */ |
| 756 | if (subfile->language == language_c |
| 757 | && subfile->next != NULL |
| 758 | && (subfile->next->language == language_cplus |
| 759 | || subfile->next->language == language_fortran)) |
| 760 | { |
| 761 | subfile->language = subfile->next->language; |
| 762 | } |
| 763 | } |
| 764 | |
| 765 | /* Start recording information about a primary source file (IOW, not an |
| 766 | included source file). |
| 767 | COMP_DIR is the directory in which the compilation unit was compiled |
| 768 | (or NULL if not known). */ |
| 769 | |
| 770 | static struct buildsym_compunit * |
| 771 | start_buildsym_compunit (struct objfile *objfile, const char *comp_dir) |
| 772 | { |
| 773 | struct buildsym_compunit *bscu; |
| 774 | |
| 775 | bscu = XNEW (struct buildsym_compunit); |
| 776 | memset (bscu, 0, sizeof (struct buildsym_compunit)); |
| 777 | |
| 778 | bscu->objfile = objfile; |
| 779 | bscu->comp_dir = (comp_dir == NULL) ? NULL : xstrdup (comp_dir); |
| 780 | |
| 781 | /* Initialize the debug format string to NULL. We may supply it |
| 782 | later via a call to record_debugformat. */ |
| 783 | bscu->debugformat = NULL; |
| 784 | |
| 785 | /* Similarly for the producer. */ |
| 786 | bscu->producer = NULL; |
| 787 | |
| 788 | return bscu; |
| 789 | } |
| 790 | |
| 791 | /* Delete the buildsym compunit. */ |
| 792 | |
| 793 | static void |
| 794 | free_buildsym_compunit (void) |
| 795 | { |
| 796 | struct subfile *subfile, *nextsub; |
| 797 | |
| 798 | if (buildsym_compunit == NULL) |
| 799 | return; |
| 800 | for (subfile = buildsym_compunit->subfiles; |
| 801 | subfile != NULL; |
| 802 | subfile = nextsub) |
| 803 | { |
| 804 | nextsub = subfile->next; |
| 805 | xfree (subfile->name); |
| 806 | xfree (subfile->line_vector); |
| 807 | xfree (subfile); |
| 808 | } |
| 809 | xfree (buildsym_compunit->comp_dir); |
| 810 | xfree (buildsym_compunit); |
| 811 | buildsym_compunit = NULL; |
| 812 | current_subfile = NULL; |
| 813 | } |
| 814 | |
| 815 | /* For stabs readers, the first N_SO symbol is assumed to be the |
| 816 | source file name, and the subfile struct is initialized using that |
| 817 | assumption. If another N_SO symbol is later seen, immediately |
| 818 | following the first one, then the first one is assumed to be the |
| 819 | directory name and the second one is really the source file name. |
| 820 | |
| 821 | So we have to patch up the subfile struct by moving the old name |
| 822 | value to dirname and remembering the new name. Some sanity |
| 823 | checking is performed to ensure that the state of the subfile |
| 824 | struct is reasonable and that the old name we are assuming to be a |
| 825 | directory name actually is (by checking for a trailing '/'). */ |
| 826 | |
| 827 | void |
| 828 | patch_subfile_names (struct subfile *subfile, char *name) |
| 829 | { |
| 830 | if (subfile != NULL |
| 831 | && buildsym_compunit->comp_dir == NULL |
| 832 | && subfile->name != NULL |
| 833 | && IS_DIR_SEPARATOR (subfile->name[strlen (subfile->name) - 1])) |
| 834 | { |
| 835 | buildsym_compunit->comp_dir = subfile->name; |
| 836 | subfile->name = xstrdup (name); |
| 837 | set_last_source_file (name); |
| 838 | |
| 839 | /* Default the source language to whatever can be deduced from |
| 840 | the filename. If nothing can be deduced (such as for a C/C++ |
| 841 | include file with a ".h" extension), then inherit whatever |
| 842 | language the previous subfile had. This kludgery is |
| 843 | necessary because there is no standard way in some object |
| 844 | formats to record the source language. Also, when symtabs |
| 845 | are allocated we try to deduce a language then as well, but |
| 846 | it is too late for us to use that information while reading |
| 847 | symbols, since symtabs aren't allocated until after all the |
| 848 | symbols have been processed for a given source file. */ |
| 849 | |
| 850 | subfile->language = deduce_language_from_filename (subfile->name); |
| 851 | if (subfile->language == language_unknown |
| 852 | && subfile->next != NULL) |
| 853 | { |
| 854 | subfile->language = subfile->next->language; |
| 855 | } |
| 856 | } |
| 857 | } |
| 858 | \f |
| 859 | /* Handle the N_BINCL and N_EINCL symbol types that act like N_SOL for |
| 860 | switching source files (different subfiles, as we call them) within |
| 861 | one object file, but using a stack rather than in an arbitrary |
| 862 | order. */ |
| 863 | |
| 864 | void |
| 865 | push_subfile (void) |
| 866 | { |
| 867 | struct subfile_stack *tem = XNEW (struct subfile_stack); |
| 868 | |
| 869 | tem->next = subfile_stack; |
| 870 | subfile_stack = tem; |
| 871 | if (current_subfile == NULL || current_subfile->name == NULL) |
| 872 | { |
| 873 | internal_error (__FILE__, __LINE__, |
| 874 | _("failed internal consistency check")); |
| 875 | } |
| 876 | tem->name = current_subfile->name; |
| 877 | } |
| 878 | |
| 879 | char * |
| 880 | pop_subfile (void) |
| 881 | { |
| 882 | char *name; |
| 883 | struct subfile_stack *link = subfile_stack; |
| 884 | |
| 885 | if (link == NULL) |
| 886 | { |
| 887 | internal_error (__FILE__, __LINE__, |
| 888 | _("failed internal consistency check")); |
| 889 | } |
| 890 | name = link->name; |
| 891 | subfile_stack = link->next; |
| 892 | xfree ((void *) link); |
| 893 | return (name); |
| 894 | } |
| 895 | \f |
| 896 | /* Add a linetable entry for line number LINE and address PC to the |
| 897 | line vector for SUBFILE. */ |
| 898 | |
| 899 | void |
| 900 | record_line (struct subfile *subfile, int line, CORE_ADDR pc) |
| 901 | { |
| 902 | struct linetable_entry *e; |
| 903 | |
| 904 | /* Ignore the dummy line number in libg.o */ |
| 905 | if (line == 0xffff) |
| 906 | { |
| 907 | return; |
| 908 | } |
| 909 | |
| 910 | /* Make sure line vector exists and is big enough. */ |
| 911 | if (!subfile->line_vector) |
| 912 | { |
| 913 | subfile->line_vector_length = INITIAL_LINE_VECTOR_LENGTH; |
| 914 | subfile->line_vector = (struct linetable *) |
| 915 | xmalloc (sizeof (struct linetable) |
| 916 | + subfile->line_vector_length * sizeof (struct linetable_entry)); |
| 917 | subfile->line_vector->nitems = 0; |
| 918 | have_line_numbers = 1; |
| 919 | } |
| 920 | |
| 921 | if (subfile->line_vector->nitems + 1 >= subfile->line_vector_length) |
| 922 | { |
| 923 | subfile->line_vector_length *= 2; |
| 924 | subfile->line_vector = (struct linetable *) |
| 925 | xrealloc ((char *) subfile->line_vector, |
| 926 | (sizeof (struct linetable) |
| 927 | + (subfile->line_vector_length |
| 928 | * sizeof (struct linetable_entry)))); |
| 929 | } |
| 930 | |
| 931 | /* Normally, we treat lines as unsorted. But the end of sequence |
| 932 | marker is special. We sort line markers at the same PC by line |
| 933 | number, so end of sequence markers (which have line == 0) appear |
| 934 | first. This is right if the marker ends the previous function, |
| 935 | and there is no padding before the next function. But it is |
| 936 | wrong if the previous line was empty and we are now marking a |
| 937 | switch to a different subfile. We must leave the end of sequence |
| 938 | marker at the end of this group of lines, not sort the empty line |
| 939 | to after the marker. The easiest way to accomplish this is to |
| 940 | delete any empty lines from our table, if they are followed by |
| 941 | end of sequence markers. All we lose is the ability to set |
| 942 | breakpoints at some lines which contain no instructions |
| 943 | anyway. */ |
| 944 | if (line == 0 && subfile->line_vector->nitems > 0) |
| 945 | { |
| 946 | e = subfile->line_vector->item + subfile->line_vector->nitems - 1; |
| 947 | while (subfile->line_vector->nitems > 0 && e->pc == pc) |
| 948 | { |
| 949 | e--; |
| 950 | subfile->line_vector->nitems--; |
| 951 | } |
| 952 | } |
| 953 | |
| 954 | e = subfile->line_vector->item + subfile->line_vector->nitems++; |
| 955 | e->line = line; |
| 956 | e->pc = pc; |
| 957 | } |
| 958 | |
| 959 | /* Needed in order to sort line tables from IBM xcoff files. Sigh! */ |
| 960 | |
| 961 | static int |
| 962 | compare_line_numbers (const void *ln1p, const void *ln2p) |
| 963 | { |
| 964 | struct linetable_entry *ln1 = (struct linetable_entry *) ln1p; |
| 965 | struct linetable_entry *ln2 = (struct linetable_entry *) ln2p; |
| 966 | |
| 967 | /* Note: this code does not assume that CORE_ADDRs can fit in ints. |
| 968 | Please keep it that way. */ |
| 969 | if (ln1->pc < ln2->pc) |
| 970 | return -1; |
| 971 | |
| 972 | if (ln1->pc > ln2->pc) |
| 973 | return 1; |
| 974 | |
| 975 | /* If pc equal, sort by line. I'm not sure whether this is optimum |
| 976 | behavior (see comment at struct linetable in symtab.h). */ |
| 977 | return ln1->line - ln2->line; |
| 978 | } |
| 979 | \f |
| 980 | /* See buildsym.h. */ |
| 981 | |
| 982 | struct compunit_symtab * |
| 983 | buildsym_compunit_symtab (void) |
| 984 | { |
| 985 | gdb_assert (buildsym_compunit != NULL); |
| 986 | |
| 987 | return buildsym_compunit->compunit_symtab; |
| 988 | } |
| 989 | |
| 990 | /* See buildsym.h. */ |
| 991 | |
| 992 | struct macro_table * |
| 993 | get_macro_table (void) |
| 994 | { |
| 995 | struct objfile *objfile; |
| 996 | |
| 997 | gdb_assert (buildsym_compunit != NULL); |
| 998 | |
| 999 | objfile = buildsym_compunit->objfile; |
| 1000 | |
| 1001 | if (! pending_macros) |
| 1002 | { |
| 1003 | pending_macros = new_macro_table (&objfile->per_bfd->storage_obstack, |
| 1004 | objfile->per_bfd->macro_cache, |
| 1005 | buildsym_compunit->compunit_symtab); |
| 1006 | } |
| 1007 | |
| 1008 | return pending_macros; |
| 1009 | } |
| 1010 | \f |
| 1011 | /* Init state to prepare for building a symtab. |
| 1012 | Note: This can't be done in buildsym_init because dbxread.c and xcoffread.c |
| 1013 | can call start_symtab+end_symtab multiple times after one call to |
| 1014 | buildsym_init. */ |
| 1015 | |
| 1016 | static void |
| 1017 | prepare_for_building (const char *name, CORE_ADDR start_addr) |
| 1018 | { |
| 1019 | set_last_source_file (name); |
| 1020 | last_source_start_addr = start_addr; |
| 1021 | |
| 1022 | local_symbols = NULL; |
| 1023 | local_using_directives = NULL; |
| 1024 | within_function = 0; |
| 1025 | have_line_numbers = 0; |
| 1026 | |
| 1027 | context_stack_depth = 0; |
| 1028 | |
| 1029 | /* These should have been reset either by successful completion of building |
| 1030 | a symtab, or by the really_free_pendings cleanup. */ |
| 1031 | gdb_assert (file_symbols == NULL); |
| 1032 | gdb_assert (global_symbols == NULL); |
| 1033 | gdb_assert (global_using_directives == NULL); |
| 1034 | gdb_assert (pending_macros == NULL); |
| 1035 | gdb_assert (pending_addrmap == NULL); |
| 1036 | gdb_assert (current_subfile == NULL); |
| 1037 | } |
| 1038 | |
| 1039 | /* Start a new symtab for a new source file in OBJFILE. Called, for example, |
| 1040 | when a stabs symbol of type N_SO is seen, or when a DWARF |
| 1041 | TAG_compile_unit DIE is seen. It indicates the start of data for |
| 1042 | one original source file. |
| 1043 | |
| 1044 | NAME is the name of the file (cannot be NULL). COMP_DIR is the directory in |
| 1045 | which the file was compiled (or NULL if not known). START_ADDR is the |
| 1046 | lowest address of objects in the file (or 0 if not known). */ |
| 1047 | |
| 1048 | struct compunit_symtab * |
| 1049 | start_symtab (struct objfile *objfile, const char *name, const char *comp_dir, |
| 1050 | CORE_ADDR start_addr) |
| 1051 | { |
| 1052 | prepare_for_building (name, start_addr); |
| 1053 | |
| 1054 | buildsym_compunit = start_buildsym_compunit (objfile, comp_dir); |
| 1055 | |
| 1056 | /* Allocate the compunit symtab now. The caller needs it to allocate |
| 1057 | non-primary symtabs. It is also needed by get_macro_table. */ |
| 1058 | buildsym_compunit->compunit_symtab = allocate_compunit_symtab (objfile, |
| 1059 | name); |
| 1060 | |
| 1061 | /* Build the subfile for NAME (the main source file) so that we can record |
| 1062 | a pointer to it for later. |
| 1063 | IMPORTANT: Do not allocate a struct symtab for NAME here. |
| 1064 | It can happen that the debug info provides a different path to NAME than |
| 1065 | DIRNAME,NAME. We cope with this in watch_main_source_file_lossage but |
| 1066 | that only works if the main_subfile doesn't have a symtab yet. */ |
| 1067 | start_subfile (name); |
| 1068 | /* Save this so that we don't have to go looking for it at the end |
| 1069 | of the subfiles list. */ |
| 1070 | buildsym_compunit->main_subfile = current_subfile; |
| 1071 | |
| 1072 | return buildsym_compunit->compunit_symtab; |
| 1073 | } |
| 1074 | |
| 1075 | /* Restart compilation for a symtab. |
| 1076 | CUST is the result of end_expandable_symtab. |
| 1077 | NAME, START_ADDR are the source file we are resuming with. |
| 1078 | |
| 1079 | This is used when a symtab is built from multiple sources. |
| 1080 | The symtab is first built with start_symtab/end_expandable_symtab |
| 1081 | and then for each additional piece call restart_symtab/augment_*_symtab. |
| 1082 | Note: At the moment there is only augment_type_symtab. */ |
| 1083 | |
| 1084 | void |
| 1085 | restart_symtab (struct compunit_symtab *cust, |
| 1086 | const char *name, CORE_ADDR start_addr) |
| 1087 | { |
| 1088 | prepare_for_building (name, start_addr); |
| 1089 | |
| 1090 | buildsym_compunit = start_buildsym_compunit (COMPUNIT_OBJFILE (cust), |
| 1091 | COMPUNIT_DIRNAME (cust)); |
| 1092 | buildsym_compunit->compunit_symtab = cust; |
| 1093 | } |
| 1094 | |
| 1095 | /* Subroutine of end_symtab to simplify it. Look for a subfile that |
| 1096 | matches the main source file's basename. If there is only one, and |
| 1097 | if the main source file doesn't have any symbol or line number |
| 1098 | information, then copy this file's symtab and line_vector to the |
| 1099 | main source file's subfile and discard the other subfile. This can |
| 1100 | happen because of a compiler bug or from the user playing games |
| 1101 | with #line or from things like a distributed build system that |
| 1102 | manipulates the debug info. This can also happen from an innocent |
| 1103 | symlink in the paths, we don't canonicalize paths here. */ |
| 1104 | |
| 1105 | static void |
| 1106 | watch_main_source_file_lossage (void) |
| 1107 | { |
| 1108 | struct subfile *mainsub, *subfile; |
| 1109 | |
| 1110 | /* We have to watch for buildsym_compunit == NULL here. It's a quirk of |
| 1111 | end_symtab, it can return NULL so there may not be a main subfile. */ |
| 1112 | if (buildsym_compunit == NULL) |
| 1113 | return; |
| 1114 | |
| 1115 | /* Get the main source file. */ |
| 1116 | mainsub = buildsym_compunit->main_subfile; |
| 1117 | |
| 1118 | /* If the main source file doesn't have any line number or symbol |
| 1119 | info, look for an alias in another subfile. */ |
| 1120 | |
| 1121 | if (mainsub->line_vector == NULL |
| 1122 | && mainsub->symtab == NULL) |
| 1123 | { |
| 1124 | const char *mainbase = lbasename (mainsub->name); |
| 1125 | int nr_matches = 0; |
| 1126 | struct subfile *prevsub; |
| 1127 | struct subfile *mainsub_alias = NULL; |
| 1128 | struct subfile *prev_mainsub_alias = NULL; |
| 1129 | |
| 1130 | prevsub = NULL; |
| 1131 | for (subfile = buildsym_compunit->subfiles; |
| 1132 | subfile != NULL; |
| 1133 | subfile = subfile->next) |
| 1134 | { |
| 1135 | if (subfile == mainsub) |
| 1136 | continue; |
| 1137 | if (filename_cmp (lbasename (subfile->name), mainbase) == 0) |
| 1138 | { |
| 1139 | ++nr_matches; |
| 1140 | mainsub_alias = subfile; |
| 1141 | prev_mainsub_alias = prevsub; |
| 1142 | } |
| 1143 | prevsub = subfile; |
| 1144 | } |
| 1145 | |
| 1146 | if (nr_matches == 1) |
| 1147 | { |
| 1148 | gdb_assert (mainsub_alias != NULL && mainsub_alias != mainsub); |
| 1149 | |
| 1150 | /* Found a match for the main source file. |
| 1151 | Copy its line_vector and symtab to the main subfile |
| 1152 | and then discard it. */ |
| 1153 | |
| 1154 | mainsub->line_vector = mainsub_alias->line_vector; |
| 1155 | mainsub->line_vector_length = mainsub_alias->line_vector_length; |
| 1156 | mainsub->symtab = mainsub_alias->symtab; |
| 1157 | |
| 1158 | if (prev_mainsub_alias == NULL) |
| 1159 | buildsym_compunit->subfiles = mainsub_alias->next; |
| 1160 | else |
| 1161 | prev_mainsub_alias->next = mainsub_alias->next; |
| 1162 | xfree (mainsub_alias->name); |
| 1163 | xfree (mainsub_alias); |
| 1164 | } |
| 1165 | } |
| 1166 | } |
| 1167 | |
| 1168 | /* Helper function for qsort. Parameters are `struct block *' pointers, |
| 1169 | function sorts them in descending order by their BLOCK_START. */ |
| 1170 | |
| 1171 | static int |
| 1172 | block_compar (const void *ap, const void *bp) |
| 1173 | { |
| 1174 | const struct block *a = *(const struct block **) ap; |
| 1175 | const struct block *b = *(const struct block **) bp; |
| 1176 | |
| 1177 | return ((BLOCK_START (b) > BLOCK_START (a)) |
| 1178 | - (BLOCK_START (b) < BLOCK_START (a))); |
| 1179 | } |
| 1180 | |
| 1181 | /* Reset state after a successful building of a symtab. |
| 1182 | This exists because dbxread.c and xcoffread.c can call |
| 1183 | start_symtab+end_symtab multiple times after one call to buildsym_init, |
| 1184 | and before the really_free_pendings cleanup is called. |
| 1185 | We keep the free_pendings list around for dbx/xcoff sake. */ |
| 1186 | |
| 1187 | static void |
| 1188 | reset_symtab_globals (void) |
| 1189 | { |
| 1190 | set_last_source_file (NULL); |
| 1191 | |
| 1192 | local_symbols = NULL; |
| 1193 | local_using_directives = NULL; |
| 1194 | file_symbols = NULL; |
| 1195 | global_symbols = NULL; |
| 1196 | global_using_directives = NULL; |
| 1197 | |
| 1198 | /* We don't free pending_macros here because if the symtab was successfully |
| 1199 | built then ownership was transferred to the symtab. */ |
| 1200 | pending_macros = NULL; |
| 1201 | |
| 1202 | if (pending_addrmap) |
| 1203 | obstack_free (&pending_addrmap_obstack, NULL); |
| 1204 | pending_addrmap = NULL; |
| 1205 | |
| 1206 | free_buildsym_compunit (); |
| 1207 | } |
| 1208 | |
| 1209 | /* Implementation of the first part of end_symtab. It allows modifying |
| 1210 | STATIC_BLOCK before it gets finalized by end_symtab_from_static_block. |
| 1211 | If the returned value is NULL there is no blockvector created for |
| 1212 | this symtab (you still must call end_symtab_from_static_block). |
| 1213 | |
| 1214 | END_ADDR is the same as for end_symtab: the address of the end of the |
| 1215 | file's text. |
| 1216 | |
| 1217 | If EXPANDABLE is non-zero the STATIC_BLOCK dictionary is made |
| 1218 | expandable. |
| 1219 | |
| 1220 | If REQUIRED is non-zero, then a symtab is created even if it does |
| 1221 | not contain any symbols. */ |
| 1222 | |
| 1223 | struct block * |
| 1224 | end_symtab_get_static_block (CORE_ADDR end_addr, int expandable, int required) |
| 1225 | { |
| 1226 | struct objfile *objfile = buildsym_compunit->objfile; |
| 1227 | |
| 1228 | /* Finish the lexical context of the last function in the file; pop |
| 1229 | the context stack. */ |
| 1230 | |
| 1231 | if (context_stack_depth > 0) |
| 1232 | { |
| 1233 | struct context_stack *cstk = pop_context (); |
| 1234 | |
| 1235 | /* Make a block for the local symbols within. */ |
| 1236 | finish_block (cstk->name, &local_symbols, cstk->old_blocks, NULL, |
| 1237 | cstk->start_addr, end_addr); |
| 1238 | |
| 1239 | if (context_stack_depth > 0) |
| 1240 | { |
| 1241 | /* This is said to happen with SCO. The old coffread.c |
| 1242 | code simply emptied the context stack, so we do the |
| 1243 | same. FIXME: Find out why it is happening. This is not |
| 1244 | believed to happen in most cases (even for coffread.c); |
| 1245 | it used to be an abort(). */ |
| 1246 | complaint (&symfile_complaints, |
| 1247 | _("Context stack not empty in end_symtab")); |
| 1248 | context_stack_depth = 0; |
| 1249 | } |
| 1250 | } |
| 1251 | |
| 1252 | /* Reordered executables may have out of order pending blocks; if |
| 1253 | OBJF_REORDERED is true, then sort the pending blocks. */ |
| 1254 | |
| 1255 | if ((objfile->flags & OBJF_REORDERED) && pending_blocks) |
| 1256 | { |
| 1257 | unsigned count = 0; |
| 1258 | struct pending_block *pb; |
| 1259 | struct block **barray, **bp; |
| 1260 | struct cleanup *back_to; |
| 1261 | |
| 1262 | for (pb = pending_blocks; pb != NULL; pb = pb->next) |
| 1263 | count++; |
| 1264 | |
| 1265 | barray = XNEWVEC (struct block *, count); |
| 1266 | back_to = make_cleanup (xfree, barray); |
| 1267 | |
| 1268 | bp = barray; |
| 1269 | for (pb = pending_blocks; pb != NULL; pb = pb->next) |
| 1270 | *bp++ = pb->block; |
| 1271 | |
| 1272 | qsort (barray, count, sizeof (*barray), block_compar); |
| 1273 | |
| 1274 | bp = barray; |
| 1275 | for (pb = pending_blocks; pb != NULL; pb = pb->next) |
| 1276 | pb->block = *bp++; |
| 1277 | |
| 1278 | do_cleanups (back_to); |
| 1279 | } |
| 1280 | |
| 1281 | /* Cleanup any undefined types that have been left hanging around |
| 1282 | (this needs to be done before the finish_blocks so that |
| 1283 | file_symbols is still good). |
| 1284 | |
| 1285 | Both cleanup_undefined_stabs_types and finish_global_stabs are stabs |
| 1286 | specific, but harmless for other symbol readers, since on gdb |
| 1287 | startup or when finished reading stabs, the state is set so these |
| 1288 | are no-ops. FIXME: Is this handled right in case of QUIT? Can |
| 1289 | we make this cleaner? */ |
| 1290 | |
| 1291 | cleanup_undefined_stabs_types (objfile); |
| 1292 | finish_global_stabs (objfile); |
| 1293 | |
| 1294 | if (!required |
| 1295 | && pending_blocks == NULL |
| 1296 | && file_symbols == NULL |
| 1297 | && global_symbols == NULL |
| 1298 | && have_line_numbers == 0 |
| 1299 | && pending_macros == NULL |
| 1300 | && global_using_directives == NULL) |
| 1301 | { |
| 1302 | /* Ignore symtabs that have no functions with real debugging info. */ |
| 1303 | return NULL; |
| 1304 | } |
| 1305 | else |
| 1306 | { |
| 1307 | /* Define the STATIC_BLOCK. */ |
| 1308 | return finish_block_internal (NULL, &file_symbols, NULL, NULL, |
| 1309 | last_source_start_addr, end_addr, |
| 1310 | 0, expandable); |
| 1311 | } |
| 1312 | } |
| 1313 | |
| 1314 | /* Subroutine of end_symtab_from_static_block to simplify it. |
| 1315 | Handle the "have blockvector" case. |
| 1316 | See end_symtab_from_static_block for a description of the arguments. */ |
| 1317 | |
| 1318 | static struct compunit_symtab * |
| 1319 | end_symtab_with_blockvector (struct block *static_block, |
| 1320 | int section, int expandable) |
| 1321 | { |
| 1322 | struct objfile *objfile = buildsym_compunit->objfile; |
| 1323 | struct compunit_symtab *cu = buildsym_compunit->compunit_symtab; |
| 1324 | struct symtab *symtab; |
| 1325 | struct blockvector *blockvector; |
| 1326 | struct subfile *subfile; |
| 1327 | CORE_ADDR end_addr; |
| 1328 | |
| 1329 | gdb_assert (static_block != NULL); |
| 1330 | gdb_assert (buildsym_compunit != NULL); |
| 1331 | gdb_assert (buildsym_compunit->subfiles != NULL); |
| 1332 | |
| 1333 | end_addr = BLOCK_END (static_block); |
| 1334 | |
| 1335 | /* Create the GLOBAL_BLOCK and build the blockvector. */ |
| 1336 | finish_block_internal (NULL, &global_symbols, NULL, NULL, |
| 1337 | last_source_start_addr, end_addr, |
| 1338 | 1, expandable); |
| 1339 | blockvector = make_blockvector (); |
| 1340 | |
| 1341 | /* Read the line table if it has to be read separately. |
| 1342 | This is only used by xcoffread.c. */ |
| 1343 | if (objfile->sf->sym_read_linetable != NULL) |
| 1344 | objfile->sf->sym_read_linetable (objfile); |
| 1345 | |
| 1346 | /* Handle the case where the debug info specifies a different path |
| 1347 | for the main source file. It can cause us to lose track of its |
| 1348 | line number information. */ |
| 1349 | watch_main_source_file_lossage (); |
| 1350 | |
| 1351 | /* Now create the symtab objects proper, if not already done, |
| 1352 | one for each subfile. */ |
| 1353 | |
| 1354 | for (subfile = buildsym_compunit->subfiles; |
| 1355 | subfile != NULL; |
| 1356 | subfile = subfile->next) |
| 1357 | { |
| 1358 | int linetablesize = 0; |
| 1359 | |
| 1360 | if (subfile->line_vector) |
| 1361 | { |
| 1362 | linetablesize = sizeof (struct linetable) + |
| 1363 | subfile->line_vector->nitems * sizeof (struct linetable_entry); |
| 1364 | |
| 1365 | /* Like the pending blocks, the line table may be |
| 1366 | scrambled in reordered executables. Sort it if |
| 1367 | OBJF_REORDERED is true. */ |
| 1368 | if (objfile->flags & OBJF_REORDERED) |
| 1369 | qsort (subfile->line_vector->item, |
| 1370 | subfile->line_vector->nitems, |
| 1371 | sizeof (struct linetable_entry), compare_line_numbers); |
| 1372 | } |
| 1373 | |
| 1374 | /* Allocate a symbol table if necessary. */ |
| 1375 | if (subfile->symtab == NULL) |
| 1376 | subfile->symtab = allocate_symtab (cu, subfile->name); |
| 1377 | symtab = subfile->symtab; |
| 1378 | |
| 1379 | /* Fill in its components. */ |
| 1380 | |
| 1381 | if (subfile->line_vector) |
| 1382 | { |
| 1383 | /* Reallocate the line table on the symbol obstack. */ |
| 1384 | SYMTAB_LINETABLE (symtab) = (struct linetable *) |
| 1385 | obstack_alloc (&objfile->objfile_obstack, linetablesize); |
| 1386 | memcpy (SYMTAB_LINETABLE (symtab), subfile->line_vector, |
| 1387 | linetablesize); |
| 1388 | } |
| 1389 | else |
| 1390 | { |
| 1391 | SYMTAB_LINETABLE (symtab) = NULL; |
| 1392 | } |
| 1393 | |
| 1394 | /* Use whatever language we have been using for this |
| 1395 | subfile, not the one that was deduced in allocate_symtab |
| 1396 | from the filename. We already did our own deducing when |
| 1397 | we created the subfile, and we may have altered our |
| 1398 | opinion of what language it is from things we found in |
| 1399 | the symbols. */ |
| 1400 | symtab->language = subfile->language; |
| 1401 | } |
| 1402 | |
| 1403 | /* Make sure the symtab of main_subfile is the first in its list. */ |
| 1404 | { |
| 1405 | struct symtab *main_symtab, *prev_symtab; |
| 1406 | |
| 1407 | main_symtab = buildsym_compunit->main_subfile->symtab; |
| 1408 | prev_symtab = NULL; |
| 1409 | ALL_COMPUNIT_FILETABS (cu, symtab) |
| 1410 | { |
| 1411 | if (symtab == main_symtab) |
| 1412 | { |
| 1413 | if (prev_symtab != NULL) |
| 1414 | { |
| 1415 | prev_symtab->next = main_symtab->next; |
| 1416 | main_symtab->next = COMPUNIT_FILETABS (cu); |
| 1417 | COMPUNIT_FILETABS (cu) = main_symtab; |
| 1418 | } |
| 1419 | break; |
| 1420 | } |
| 1421 | prev_symtab = symtab; |
| 1422 | } |
| 1423 | gdb_assert (main_symtab == COMPUNIT_FILETABS (cu)); |
| 1424 | } |
| 1425 | |
| 1426 | /* Fill out the compunit symtab. */ |
| 1427 | |
| 1428 | if (buildsym_compunit->comp_dir != NULL) |
| 1429 | { |
| 1430 | /* Reallocate the dirname on the symbol obstack. */ |
| 1431 | COMPUNIT_DIRNAME (cu) |
| 1432 | = obstack_copy0 (&objfile->objfile_obstack, |
| 1433 | buildsym_compunit->comp_dir, |
| 1434 | strlen (buildsym_compunit->comp_dir)); |
| 1435 | } |
| 1436 | |
| 1437 | /* Save the debug format string (if any) in the symtab. */ |
| 1438 | COMPUNIT_DEBUGFORMAT (cu) = buildsym_compunit->debugformat; |
| 1439 | |
| 1440 | /* Similarly for the producer. */ |
| 1441 | COMPUNIT_PRODUCER (cu) = buildsym_compunit->producer; |
| 1442 | |
| 1443 | COMPUNIT_BLOCKVECTOR (cu) = blockvector; |
| 1444 | { |
| 1445 | struct block *b = BLOCKVECTOR_BLOCK (blockvector, GLOBAL_BLOCK); |
| 1446 | |
| 1447 | set_block_compunit_symtab (b, cu); |
| 1448 | } |
| 1449 | |
| 1450 | COMPUNIT_BLOCK_LINE_SECTION (cu) = section; |
| 1451 | |
| 1452 | COMPUNIT_MACRO_TABLE (cu) = pending_macros; |
| 1453 | |
| 1454 | /* Default any symbols without a specified symtab to the primary symtab. */ |
| 1455 | { |
| 1456 | int block_i; |
| 1457 | |
| 1458 | /* The main source file's symtab. */ |
| 1459 | symtab = COMPUNIT_FILETABS (cu); |
| 1460 | |
| 1461 | for (block_i = 0; block_i < BLOCKVECTOR_NBLOCKS (blockvector); block_i++) |
| 1462 | { |
| 1463 | struct block *block = BLOCKVECTOR_BLOCK (blockvector, block_i); |
| 1464 | struct symbol *sym; |
| 1465 | struct dict_iterator iter; |
| 1466 | |
| 1467 | /* Inlined functions may have symbols not in the global or |
| 1468 | static symbol lists. */ |
| 1469 | if (BLOCK_FUNCTION (block) != NULL) |
| 1470 | if (symbol_symtab (BLOCK_FUNCTION (block)) == NULL) |
| 1471 | symbol_set_symtab (BLOCK_FUNCTION (block), symtab); |
| 1472 | |
| 1473 | /* Note that we only want to fix up symbols from the local |
| 1474 | blocks, not blocks coming from included symtabs. That is why |
| 1475 | we use ALL_DICT_SYMBOLS here and not ALL_BLOCK_SYMBOLS. */ |
| 1476 | ALL_DICT_SYMBOLS (BLOCK_DICT (block), iter, sym) |
| 1477 | if (symbol_symtab (sym) == NULL) |
| 1478 | symbol_set_symtab (sym, symtab); |
| 1479 | } |
| 1480 | } |
| 1481 | |
| 1482 | add_compunit_symtab_to_objfile (cu); |
| 1483 | |
| 1484 | return cu; |
| 1485 | } |
| 1486 | |
| 1487 | /* Implementation of the second part of end_symtab. Pass STATIC_BLOCK |
| 1488 | as value returned by end_symtab_get_static_block. |
| 1489 | |
| 1490 | SECTION is the same as for end_symtab: the section number |
| 1491 | (in objfile->section_offsets) of the blockvector and linetable. |
| 1492 | |
| 1493 | If EXPANDABLE is non-zero the GLOBAL_BLOCK dictionary is made |
| 1494 | expandable. */ |
| 1495 | |
| 1496 | struct compunit_symtab * |
| 1497 | end_symtab_from_static_block (struct block *static_block, |
| 1498 | int section, int expandable) |
| 1499 | { |
| 1500 | struct compunit_symtab *cu; |
| 1501 | |
| 1502 | if (static_block == NULL) |
| 1503 | { |
| 1504 | /* Handle the "no blockvector" case. |
| 1505 | When this happens there is nothing to record, so there's nothing |
| 1506 | to do: memory will be freed up later. |
| 1507 | |
| 1508 | Note: We won't be adding a compunit to the objfile's list of |
| 1509 | compunits, so there's nothing to unchain. However, since each symtab |
| 1510 | is added to the objfile's obstack we can't free that space. |
| 1511 | We could do better, but this is believed to be a sufficiently rare |
| 1512 | event. */ |
| 1513 | cu = NULL; |
| 1514 | } |
| 1515 | else |
| 1516 | cu = end_symtab_with_blockvector (static_block, section, expandable); |
| 1517 | |
| 1518 | reset_symtab_globals (); |
| 1519 | |
| 1520 | return cu; |
| 1521 | } |
| 1522 | |
| 1523 | /* Finish the symbol definitions for one main source file, close off |
| 1524 | all the lexical contexts for that file (creating struct block's for |
| 1525 | them), then make the struct symtab for that file and put it in the |
| 1526 | list of all such. |
| 1527 | |
| 1528 | END_ADDR is the address of the end of the file's text. SECTION is |
| 1529 | the section number (in objfile->section_offsets) of the blockvector |
| 1530 | and linetable. |
| 1531 | |
| 1532 | Note that it is possible for end_symtab() to return NULL. In |
| 1533 | particular, for the DWARF case at least, it will return NULL when |
| 1534 | it finds a compilation unit that has exactly one DIE, a |
| 1535 | TAG_compile_unit DIE. This can happen when we link in an object |
| 1536 | file that was compiled from an empty source file. Returning NULL |
| 1537 | is probably not the correct thing to do, because then gdb will |
| 1538 | never know about this empty file (FIXME). |
| 1539 | |
| 1540 | If you need to modify STATIC_BLOCK before it is finalized you should |
| 1541 | call end_symtab_get_static_block and end_symtab_from_static_block |
| 1542 | yourself. */ |
| 1543 | |
| 1544 | struct compunit_symtab * |
| 1545 | end_symtab (CORE_ADDR end_addr, int section) |
| 1546 | { |
| 1547 | struct block *static_block; |
| 1548 | |
| 1549 | static_block = end_symtab_get_static_block (end_addr, 0, 0); |
| 1550 | return end_symtab_from_static_block (static_block, section, 0); |
| 1551 | } |
| 1552 | |
| 1553 | /* Same as end_symtab except create a symtab that can be later added to. */ |
| 1554 | |
| 1555 | struct compunit_symtab * |
| 1556 | end_expandable_symtab (CORE_ADDR end_addr, int section) |
| 1557 | { |
| 1558 | struct block *static_block; |
| 1559 | |
| 1560 | static_block = end_symtab_get_static_block (end_addr, 1, 0); |
| 1561 | return end_symtab_from_static_block (static_block, section, 1); |
| 1562 | } |
| 1563 | |
| 1564 | /* Subroutine of augment_type_symtab to simplify it. |
| 1565 | Attach the main source file's symtab to all symbols in PENDING_LIST that |
| 1566 | don't have one. */ |
| 1567 | |
| 1568 | static void |
| 1569 | set_missing_symtab (struct pending *pending_list, |
| 1570 | struct compunit_symtab *cu) |
| 1571 | { |
| 1572 | struct pending *pending; |
| 1573 | int i; |
| 1574 | |
| 1575 | for (pending = pending_list; pending != NULL; pending = pending->next) |
| 1576 | { |
| 1577 | for (i = 0; i < pending->nsyms; ++i) |
| 1578 | { |
| 1579 | if (symbol_symtab (pending->symbol[i]) == NULL) |
| 1580 | symbol_set_symtab (pending->symbol[i], COMPUNIT_FILETABS (cu)); |
| 1581 | } |
| 1582 | } |
| 1583 | } |
| 1584 | |
| 1585 | /* Same as end_symtab, but for the case where we're adding more symbols |
| 1586 | to an existing symtab that is known to contain only type information. |
| 1587 | This is the case for DWARF4 Type Units. */ |
| 1588 | |
| 1589 | void |
| 1590 | augment_type_symtab (void) |
| 1591 | { |
| 1592 | struct compunit_symtab *cust = buildsym_compunit->compunit_symtab; |
| 1593 | const struct blockvector *blockvector = COMPUNIT_BLOCKVECTOR (cust); |
| 1594 | |
| 1595 | if (context_stack_depth > 0) |
| 1596 | { |
| 1597 | complaint (&symfile_complaints, |
| 1598 | _("Context stack not empty in augment_type_symtab")); |
| 1599 | context_stack_depth = 0; |
| 1600 | } |
| 1601 | if (pending_blocks != NULL) |
| 1602 | complaint (&symfile_complaints, _("Blocks in a type symtab")); |
| 1603 | if (pending_macros != NULL) |
| 1604 | complaint (&symfile_complaints, _("Macro in a type symtab")); |
| 1605 | if (have_line_numbers) |
| 1606 | complaint (&symfile_complaints, |
| 1607 | _("Line numbers recorded in a type symtab")); |
| 1608 | |
| 1609 | if (file_symbols != NULL) |
| 1610 | { |
| 1611 | struct block *block = BLOCKVECTOR_BLOCK (blockvector, STATIC_BLOCK); |
| 1612 | |
| 1613 | /* First mark any symbols without a specified symtab as belonging |
| 1614 | to the primary symtab. */ |
| 1615 | set_missing_symtab (file_symbols, cust); |
| 1616 | |
| 1617 | dict_add_pending (BLOCK_DICT (block), file_symbols); |
| 1618 | } |
| 1619 | |
| 1620 | if (global_symbols != NULL) |
| 1621 | { |
| 1622 | struct block *block = BLOCKVECTOR_BLOCK (blockvector, GLOBAL_BLOCK); |
| 1623 | |
| 1624 | /* First mark any symbols without a specified symtab as belonging |
| 1625 | to the primary symtab. */ |
| 1626 | set_missing_symtab (global_symbols, cust); |
| 1627 | |
| 1628 | dict_add_pending (BLOCK_DICT (block), global_symbols); |
| 1629 | } |
| 1630 | |
| 1631 | reset_symtab_globals (); |
| 1632 | } |
| 1633 | |
| 1634 | /* Push a context block. Args are an identifying nesting level |
| 1635 | (checkable when you pop it), and the starting PC address of this |
| 1636 | context. */ |
| 1637 | |
| 1638 | struct context_stack * |
| 1639 | push_context (int desc, CORE_ADDR valu) |
| 1640 | { |
| 1641 | struct context_stack *newobj; |
| 1642 | |
| 1643 | if (context_stack_depth == context_stack_size) |
| 1644 | { |
| 1645 | context_stack_size *= 2; |
| 1646 | context_stack = (struct context_stack *) |
| 1647 | xrealloc ((char *) context_stack, |
| 1648 | (context_stack_size * sizeof (struct context_stack))); |
| 1649 | } |
| 1650 | |
| 1651 | newobj = &context_stack[context_stack_depth++]; |
| 1652 | newobj->depth = desc; |
| 1653 | newobj->locals = local_symbols; |
| 1654 | newobj->old_blocks = pending_blocks; |
| 1655 | newobj->start_addr = valu; |
| 1656 | newobj->local_using_directives = local_using_directives; |
| 1657 | newobj->name = NULL; |
| 1658 | |
| 1659 | local_symbols = NULL; |
| 1660 | local_using_directives = NULL; |
| 1661 | |
| 1662 | return newobj; |
| 1663 | } |
| 1664 | |
| 1665 | /* Pop a context block. Returns the address of the context block just |
| 1666 | popped. */ |
| 1667 | |
| 1668 | struct context_stack * |
| 1669 | pop_context (void) |
| 1670 | { |
| 1671 | gdb_assert (context_stack_depth > 0); |
| 1672 | return (&context_stack[--context_stack_depth]); |
| 1673 | } |
| 1674 | |
| 1675 | \f |
| 1676 | |
| 1677 | /* Compute a small integer hash code for the given name. */ |
| 1678 | |
| 1679 | int |
| 1680 | hashname (const char *name) |
| 1681 | { |
| 1682 | return (hash(name,strlen(name)) % HASHSIZE); |
| 1683 | } |
| 1684 | \f |
| 1685 | |
| 1686 | void |
| 1687 | record_debugformat (const char *format) |
| 1688 | { |
| 1689 | buildsym_compunit->debugformat = format; |
| 1690 | } |
| 1691 | |
| 1692 | void |
| 1693 | record_producer (const char *producer) |
| 1694 | { |
| 1695 | buildsym_compunit->producer = producer; |
| 1696 | } |
| 1697 | |
| 1698 | /* Merge the first symbol list SRCLIST into the second symbol list |
| 1699 | TARGETLIST by repeated calls to add_symbol_to_list(). This |
| 1700 | procedure "frees" each link of SRCLIST by adding it to the |
| 1701 | free_pendings list. Caller must set SRCLIST to a null list after |
| 1702 | calling this function. |
| 1703 | |
| 1704 | Void return. */ |
| 1705 | |
| 1706 | void |
| 1707 | merge_symbol_lists (struct pending **srclist, struct pending **targetlist) |
| 1708 | { |
| 1709 | int i; |
| 1710 | |
| 1711 | if (!srclist || !*srclist) |
| 1712 | return; |
| 1713 | |
| 1714 | /* Merge in elements from current link. */ |
| 1715 | for (i = 0; i < (*srclist)->nsyms; i++) |
| 1716 | add_symbol_to_list ((*srclist)->symbol[i], targetlist); |
| 1717 | |
| 1718 | /* Recurse on next. */ |
| 1719 | merge_symbol_lists (&(*srclist)->next, targetlist); |
| 1720 | |
| 1721 | /* "Free" the current link. */ |
| 1722 | (*srclist)->next = free_pendings; |
| 1723 | free_pendings = (*srclist); |
| 1724 | } |
| 1725 | \f |
| 1726 | |
| 1727 | /* Name of source file whose symbol data we are now processing. This |
| 1728 | comes from a symbol of type N_SO for stabs. For Dwarf it comes |
| 1729 | from the DW_AT_name attribute of a DW_TAG_compile_unit DIE. */ |
| 1730 | |
| 1731 | static char *last_source_file; |
| 1732 | |
| 1733 | /* See buildsym.h. */ |
| 1734 | |
| 1735 | void |
| 1736 | set_last_source_file (const char *name) |
| 1737 | { |
| 1738 | xfree (last_source_file); |
| 1739 | last_source_file = name == NULL ? NULL : xstrdup (name); |
| 1740 | } |
| 1741 | |
| 1742 | /* See buildsym.h. */ |
| 1743 | |
| 1744 | const char * |
| 1745 | get_last_source_file (void) |
| 1746 | { |
| 1747 | return last_source_file; |
| 1748 | } |
| 1749 | |
| 1750 | \f |
| 1751 | |
| 1752 | /* Initialize anything that needs initializing when starting to read a |
| 1753 | fresh piece of a symbol file, e.g. reading in the stuff |
| 1754 | corresponding to a psymtab. */ |
| 1755 | |
| 1756 | void |
| 1757 | buildsym_init (void) |
| 1758 | { |
| 1759 | subfile_stack = NULL; |
| 1760 | |
| 1761 | pending_addrmap_interesting = 0; |
| 1762 | |
| 1763 | /* Context stack is initially empty. Allocate first one with room |
| 1764 | for a few levels; reuse it forever afterward. */ |
| 1765 | if (context_stack == NULL) |
| 1766 | { |
| 1767 | context_stack_size = INITIAL_CONTEXT_STACK_SIZE; |
| 1768 | context_stack = XNEWVEC (struct context_stack, context_stack_size); |
| 1769 | } |
| 1770 | |
| 1771 | /* Ensure the really_free_pendings cleanup was called after |
| 1772 | the last time. */ |
| 1773 | gdb_assert (free_pendings == NULL); |
| 1774 | gdb_assert (pending_blocks == NULL); |
| 1775 | gdb_assert (file_symbols == NULL); |
| 1776 | gdb_assert (global_symbols == NULL); |
| 1777 | gdb_assert (global_using_directives == NULL); |
| 1778 | gdb_assert (pending_macros == NULL); |
| 1779 | gdb_assert (pending_addrmap == NULL); |
| 1780 | gdb_assert (buildsym_compunit == NULL); |
| 1781 | } |
| 1782 | |
| 1783 | /* Initialize anything that needs initializing when a completely new |
| 1784 | symbol file is specified (not just adding some symbols from another |
| 1785 | file, e.g. a shared library). */ |
| 1786 | |
| 1787 | void |
| 1788 | buildsym_new_init (void) |
| 1789 | { |
| 1790 | buildsym_init (); |
| 1791 | } |