[deliverable/binutils-gdb.git] / gdb / gdbserver / configure.srv

# Mappings from configuration triplets to gdbserver build options.
# This is invoked from the autoconf-generated configure script, to
# produce the appropriate Makefile substitutions.

# This file sets the following shell variables:
#   srv_regobj		The register protocol appropriate for this target.
#   srv_tgtobj		Any other target-specific modules appropriate
#			for this target.
#
# In addition, on GNU/Linux the following shell variables will be set:
#   srv_linux_regsets	Set to "yes" if ptrace(PTRACE_GETREGS) and friends
#			may be available on this platform;  unset otherwise.
#			They will only be used if <sys/ptrace.h> defines
#			PTRACE_GETREGS.
#   srv_linux_usrregs	Set to "yes" if we can get at registers via
#			PTRACE_PEEKUSR / PTRACE_POKEUSR.

# Input is taken from the "${target}" variable.

case "${target}" in
  arm*-*-linux*)	srv_regobj=reg-arm.o
			srv_tgtobj="linux-low.o linux-arm-low.o"
			srv_linux_usrregs=yes
			srv_linux_thread_db=yes
			;;
  i[34567]86-*-linux*)	srv_regobj=reg-i386-linux.o
			srv_tgtobj="linux-low.o linux-i386-low.o i387-fp.o"
			srv_linux_usrregs=yes
			srv_linux_regsets=yes
			srv_linux_thread_db=yes
			;;
  ia64-*-linux*)	srv_regobj=reg-ia64.o
			srv_tgtobj="linux-low.o linux-ia64-low.o"
			srv_linux_usrregs=yes
			;;
  m68*-*-linux*)	srv_regobj=reg-m68k.o
			srv_tgtobj="linux-low.o linux-m68k-low.o"
			srv_linux_usrregs=yes
			srv_linux_regsets=yes
			srv_linux_thread_db=yes
			;;
  mips*-*-linux*)	srv_regobj=reg-mips.o
			srv_tgtobj="linux-low.o linux-mips-low.o"
			srv_linux_usrregs=yes
			srv_linux_thread_db=yes
			;;
  powerpc*-*-linux*)	srv_regobj=reg-ppc.o
			srv_tgtobj="linux-low.o linux-ppc-low.o"
			srv_linux_usrregs=yes
			srv_linux_thread_db=yes
			;;
  s390-*-linux*)	srv_regobj=reg-s390.o
			srv_tgtobj="linux-low.o linux-s390-low.o"
			srv_linux_usrregs=yes
			;;
  s390x-*-linux*)	srv_regobj=reg-s390x.o
			srv_tgtobj="linux-low.o linux-s390-low.o"
			srv_linux_usrregs=yes
			;;
  sh*-*-linux*)		srv_regobj=reg-sh.o
			srv_tgtobj="linux-low.o linux-sh-low.o"
			srv_linux_usrregs=yes
			srv_linux_thread_db=yes
			;;
  x86_64-*-linux*)	srv_regobj=reg-x86-64.o
			srv_tgtobj="linux-low.o linux-x86-64-low.o i387-fp.o"
			srv_linux_regsets=yes
			;;
  xscale*-*-linux*)	srv_regobj=reg-arm.o
			srv_tgtobj="linux-low.o linux-arm-low.o"
			srv_linux_usrregs=yes
			srv_linux_thread_db=yes
			;;
  *)			echo "Error: target not supported by gdbserver."
			exit 1
			;;
esac
Commit	Line	Data
	1	# Mappings from configuration triplets to gdbserver build options.
	2	# This is invoked from the autoconf-generated configure script, to
	3	# produce the appropriate Makefile substitutions.
	4
	5	# This file sets the following shell variables:
	6	# srv_regobj The register protocol appropriate for this target.
	7	# srv_tgtobj Any other target-specific modules appropriate
	8	# for this target.
	9	#
	10	# In addition, on GNU/Linux the following shell variables will be set:
	11	# srv_linux_regsets Set to "yes" if ptrace(PTRACE_GETREGS) and friends
	12	# may be available on this platform; unset otherwise.
	13	# They will only be used if <sys/ptrace.h> defines
	14	# PTRACE_GETREGS.
	15	# srv_linux_usrregs Set to "yes" if we can get at registers via
	16	# PTRACE_PEEKUSR / PTRACE_POKEUSR.
	17
	18	# Input is taken from the "${target}" variable.
	19
	20	case "${target}" in
	21	arm--linux*) srv_regobj=reg-arm.o
	22	srv_tgtobj="linux-low.o linux-arm-low.o"
	23	srv_linux_usrregs=yes
	24	srv_linux_thread_db=yes
	25	;;
	26	i[34567]86--linux) srv_regobj=reg-i386-linux.o
	27	srv_tgtobj="linux-low.o linux-i386-low.o i387-fp.o"
	28	srv_linux_usrregs=yes
	29	srv_linux_regsets=yes
	30	srv_linux_thread_db=yes
	31	;;
	32	ia64--linux) srv_regobj=reg-ia64.o
	33	srv_tgtobj="linux-low.o linux-ia64-low.o"
	34	srv_linux_usrregs=yes
	35	;;
	36	m68--linux*) srv_regobj=reg-m68k.o
	37	srv_tgtobj="linux-low.o linux-m68k-low.o"
	38	srv_linux_usrregs=yes
	39	srv_linux_regsets=yes
	40	srv_linux_thread_db=yes
	41	;;
	42	mips--linux*) srv_regobj=reg-mips.o
	43	srv_tgtobj="linux-low.o linux-mips-low.o"
	44	srv_linux_usrregs=yes
	45	srv_linux_thread_db=yes
	46	;;
	47	powerpc--linux*) srv_regobj=reg-ppc.o
	48	srv_tgtobj="linux-low.o linux-ppc-low.o"
	49	srv_linux_usrregs=yes
	50	srv_linux_thread_db=yes
	51	;;
	52	s390--linux) srv_regobj=reg-s390.o
	53	srv_tgtobj="linux-low.o linux-s390-low.o"
	54	srv_linux_usrregs=yes
	55	;;
	56	s390x--linux) srv_regobj=reg-s390x.o
	57	srv_tgtobj="linux-low.o linux-s390-low.o"
	58	srv_linux_usrregs=yes
	59	;;
	60	sh--linux*) srv_regobj=reg-sh.o
	61	srv_tgtobj="linux-low.o linux-sh-low.o"
	62	srv_linux_usrregs=yes
	63	srv_linux_thread_db=yes
	64	;;
	65	x86_64--linux) srv_regobj=reg-x86-64.o
	66	srv_tgtobj="linux-low.o linux-x86-64-low.o i387-fp.o"
	67	srv_linux_regsets=yes
	68	;;
	69	xscale--linux*) srv_regobj=reg-arm.o
	70	srv_tgtobj="linux-low.o linux-arm-low.o"
	71	srv_linux_usrregs=yes
	72	srv_linux_thread_db=yes
	73	;;
	74	*) echo "Error: target not supported by gdbserver."
	75	exit 1
	76	;;
	77	esac