| 1 | /* GNU/Linux/CRIS specific low level interface, for the remote server for GDB. |
| 2 | Copyright (C) 1995-2017 Free Software Foundation, Inc. |
| 3 | |
| 4 | This file is part of GDB. |
| 5 | |
| 6 | This program is free software; you can redistribute it and/or modify |
| 7 | it under the terms of the GNU General Public License as published by |
| 8 | the Free Software Foundation; either version 3 of the License, or |
| 9 | (at your option) any later version. |
| 10 | |
| 11 | This program is distributed in the hope that it will be useful, |
| 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | GNU General Public License for more details. |
| 15 | |
| 16 | You should have received a copy of the GNU General Public License |
| 17 | along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| 18 | |
| 19 | #include "server.h" |
| 20 | #include "linux-low.h" |
| 21 | #include "nat/gdb_ptrace.h" |
| 22 | |
| 23 | /* Defined in auto-generated file reg-crisv32.c. */ |
| 24 | void init_registers_crisv32 (void); |
| 25 | extern const struct target_desc *tdesc_crisv32; |
| 26 | |
| 27 | /* CRISv32 */ |
| 28 | #define cris_num_regs 49 |
| 29 | |
| 30 | #ifndef PTRACE_GET_THREAD_AREA |
| 31 | #define PTRACE_GET_THREAD_AREA 25 |
| 32 | #endif |
| 33 | |
| 34 | /* Note: Ignoring USP (having the stack pointer in two locations causes trouble |
| 35 | without any significant gain). */ |
| 36 | |
| 37 | /* Locations need to match <include/asm/arch/ptrace.h>. */ |
| 38 | static int cris_regmap[] = { |
| 39 | 1*4, 2*4, 3*4, 4*4, |
| 40 | 5*4, 6*4, 7*4, 8*4, |
| 41 | 9*4, 10*4, 11*4, 12*4, |
| 42 | 13*4, 14*4, 24*4, 15*4, |
| 43 | |
| 44 | -1, -1, -1, 16*4, |
| 45 | -1, 22*4, 23*4, 17*4, |
| 46 | -1, -1, 21*4, 20*4, |
| 47 | -1, 19*4, -1, 18*4, |
| 48 | |
| 49 | 25*4, |
| 50 | |
| 51 | 26*4, -1, -1, 29*4, |
| 52 | 30*4, 31*4, 32*4, 33*4, |
| 53 | 34*4, 35*4, 36*4, 37*4, |
| 54 | 38*4, 39*4, 40*4, -1 |
| 55 | |
| 56 | }; |
| 57 | |
| 58 | static const unsigned short cris_breakpoint = 0xe938; |
| 59 | #define cris_breakpoint_len 2 |
| 60 | |
| 61 | /* Implementation of linux_target_ops method "sw_breakpoint_from_kind". */ |
| 62 | |
| 63 | static const gdb_byte * |
| 64 | cris_sw_breakpoint_from_kind (int kind, int *size) |
| 65 | { |
| 66 | *size = cris_breakpoint_len; |
| 67 | return (const gdb_byte *) &cris_breakpoint; |
| 68 | } |
| 69 | |
| 70 | static int |
| 71 | cris_breakpoint_at (CORE_ADDR where) |
| 72 | { |
| 73 | unsigned short insn; |
| 74 | |
| 75 | (*the_target->read_memory) (where, (unsigned char *) &insn, |
| 76 | cris_breakpoint_len); |
| 77 | if (insn == cris_breakpoint) |
| 78 | return 1; |
| 79 | |
| 80 | /* If necessary, recognize more trap instructions here. GDB only uses the |
| 81 | one. */ |
| 82 | return 0; |
| 83 | } |
| 84 | |
| 85 | static void |
| 86 | cris_write_data_breakpoint (struct regcache *regcache, |
| 87 | int bp, unsigned long start, unsigned long end) |
| 88 | { |
| 89 | switch (bp) |
| 90 | { |
| 91 | case 0: |
| 92 | supply_register_by_name (regcache, "s3", &start); |
| 93 | supply_register_by_name (regcache, "s4", &end); |
| 94 | break; |
| 95 | case 1: |
| 96 | supply_register_by_name (regcache, "s5", &start); |
| 97 | supply_register_by_name (regcache, "s6", &end); |
| 98 | break; |
| 99 | case 2: |
| 100 | supply_register_by_name (regcache, "s7", &start); |
| 101 | supply_register_by_name (regcache, "s8", &end); |
| 102 | break; |
| 103 | case 3: |
| 104 | supply_register_by_name (regcache, "s9", &start); |
| 105 | supply_register_by_name (regcache, "s10", &end); |
| 106 | break; |
| 107 | case 4: |
| 108 | supply_register_by_name (regcache, "s11", &start); |
| 109 | supply_register_by_name (regcache, "s12", &end); |
| 110 | break; |
| 111 | case 5: |
| 112 | supply_register_by_name (regcache, "s13", &start); |
| 113 | supply_register_by_name (regcache, "s14", &end); |
| 114 | break; |
| 115 | } |
| 116 | } |
| 117 | |
| 118 | static int |
| 119 | cris_supports_z_point_type (char z_type) |
| 120 | { |
| 121 | switch (z_type) |
| 122 | { |
| 123 | case Z_PACKET_WRITE_WP: |
| 124 | case Z_PACKET_READ_WP: |
| 125 | case Z_PACKET_ACCESS_WP: |
| 126 | return 1; |
| 127 | default: |
| 128 | return 0; |
| 129 | } |
| 130 | } |
| 131 | |
| 132 | static int |
| 133 | cris_insert_point (enum raw_bkpt_type type, CORE_ADDR addr, |
| 134 | int len, struct raw_breakpoint *bp) |
| 135 | { |
| 136 | int bp; |
| 137 | unsigned long bp_ctrl; |
| 138 | unsigned long start, end; |
| 139 | unsigned long ccs; |
| 140 | struct regcache *regcache; |
| 141 | |
| 142 | regcache = get_thread_regcache (current_thread, 1); |
| 143 | |
| 144 | /* Read watchpoints are set as access watchpoints, because of GDB's |
| 145 | inability to deal with pure read watchpoints. */ |
| 146 | if (type == raw_bkpt_type_read_wp) |
| 147 | type = raw_bkpt_type_access_wp; |
| 148 | |
| 149 | /* Get the configuration register. */ |
| 150 | collect_register_by_name (regcache, "s0", &bp_ctrl); |
| 151 | |
| 152 | /* The watchpoint allocation scheme is the simplest possible. |
| 153 | For example, if a region is watched for read and |
| 154 | a write watch is requested, a new watchpoint will |
| 155 | be used. Also, if a watch for a region that is already |
| 156 | covered by one or more existing watchpoints, a new |
| 157 | watchpoint will be used. */ |
| 158 | |
| 159 | /* First, find a free data watchpoint. */ |
| 160 | for (bp = 0; bp < 6; bp++) |
| 161 | { |
| 162 | /* Each data watchpoint's control registers occupy 2 bits |
| 163 | (hence the 3), starting at bit 2 for D0 (hence the 2) |
| 164 | with 4 bits between for each watchpoint (yes, the 4). */ |
| 165 | if (!(bp_ctrl & (0x3 << (2 + (bp * 4))))) |
| 166 | break; |
| 167 | } |
| 168 | |
| 169 | if (bp > 5) |
| 170 | { |
| 171 | /* We're out of watchpoints. */ |
| 172 | return -1; |
| 173 | } |
| 174 | |
| 175 | /* Configure the control register first. */ |
| 176 | if (type == raw_bkpt_type_read_wp || type == raw_bkpt_type_access_wp) |
| 177 | { |
| 178 | /* Trigger on read. */ |
| 179 | bp_ctrl |= (1 << (2 + bp * 4)); |
| 180 | } |
| 181 | if (type == raw_bkpt_type_write_wp || type == raw_bkpt_type_access_wp) |
| 182 | { |
| 183 | /* Trigger on write. */ |
| 184 | bp_ctrl |= (2 << (2 + bp * 4)); |
| 185 | } |
| 186 | |
| 187 | /* Setup the configuration register. */ |
| 188 | supply_register_by_name (regcache, "s0", &bp_ctrl); |
| 189 | |
| 190 | /* Setup the range. */ |
| 191 | start = addr; |
| 192 | end = addr + len - 1; |
| 193 | |
| 194 | /* Configure the watchpoint register. */ |
| 195 | cris_write_data_breakpoint (regcache, bp, start, end); |
| 196 | |
| 197 | collect_register_by_name (regcache, "ccs", &ccs); |
| 198 | /* Set the S1 flag to enable watchpoints. */ |
| 199 | ccs |= (1 << 19); |
| 200 | supply_register_by_name (regcache, "ccs", &ccs); |
| 201 | |
| 202 | return 0; |
| 203 | } |
| 204 | |
| 205 | static int |
| 206 | cris_remove_point (enum raw_bkpt_type type, CORE_ADDR addr, int len, |
| 207 | struct raw_breakpoint *bp) |
| 208 | { |
| 209 | int bp; |
| 210 | unsigned long bp_ctrl; |
| 211 | unsigned long start, end; |
| 212 | struct regcache *regcache; |
| 213 | unsigned long bp_d_regs[12]; |
| 214 | |
| 215 | regcache = get_thread_regcache (current_thread, 1); |
| 216 | |
| 217 | /* Read watchpoints are set as access watchpoints, because of GDB's |
| 218 | inability to deal with pure read watchpoints. */ |
| 219 | if (type == raw_bkpt_type_read_wp) |
| 220 | type = raw_bkpt_type_access_wp; |
| 221 | |
| 222 | /* Get the configuration register. */ |
| 223 | collect_register_by_name (regcache, "s0", &bp_ctrl); |
| 224 | |
| 225 | /* Try to find a watchpoint that is configured for the |
| 226 | specified range, then check that read/write also matches. */ |
| 227 | |
| 228 | /* Ugly pointer arithmetic, since I cannot rely on a |
| 229 | single switch (addr) as there may be several watchpoints with |
| 230 | the same start address for example. */ |
| 231 | |
| 232 | /* Get all range registers to simplify search. */ |
| 233 | collect_register_by_name (regcache, "s3", &bp_d_regs[0]); |
| 234 | collect_register_by_name (regcache, "s4", &bp_d_regs[1]); |
| 235 | collect_register_by_name (regcache, "s5", &bp_d_regs[2]); |
| 236 | collect_register_by_name (regcache, "s6", &bp_d_regs[3]); |
| 237 | collect_register_by_name (regcache, "s7", &bp_d_regs[4]); |
| 238 | collect_register_by_name (regcache, "s8", &bp_d_regs[5]); |
| 239 | collect_register_by_name (regcache, "s9", &bp_d_regs[6]); |
| 240 | collect_register_by_name (regcache, "s10", &bp_d_regs[7]); |
| 241 | collect_register_by_name (regcache, "s11", &bp_d_regs[8]); |
| 242 | collect_register_by_name (regcache, "s12", &bp_d_regs[9]); |
| 243 | collect_register_by_name (regcache, "s13", &bp_d_regs[10]); |
| 244 | collect_register_by_name (regcache, "s14", &bp_d_regs[11]); |
| 245 | |
| 246 | for (bp = 0; bp < 6; bp++) |
| 247 | { |
| 248 | if (bp_d_regs[bp * 2] == addr |
| 249 | && bp_d_regs[bp * 2 + 1] == (addr + len - 1)) { |
| 250 | /* Matching range. */ |
| 251 | int bitpos = 2 + bp * 4; |
| 252 | int rw_bits; |
| 253 | |
| 254 | /* Read/write bits for this BP. */ |
| 255 | rw_bits = (bp_ctrl & (0x3 << bitpos)) >> bitpos; |
| 256 | |
| 257 | if ((type == raw_bkpt_type_read_wp && rw_bits == 0x1) |
| 258 | || (type == raw_bkpt_type_write_wp && rw_bits == 0x2) |
| 259 | || (type == raw_bkpt_type_access_wp && rw_bits == 0x3)) |
| 260 | { |
| 261 | /* Read/write matched. */ |
| 262 | break; |
| 263 | } |
| 264 | } |
| 265 | } |
| 266 | |
| 267 | if (bp > 5) |
| 268 | { |
| 269 | /* No watchpoint matched. */ |
| 270 | return -1; |
| 271 | } |
| 272 | |
| 273 | /* Found a matching watchpoint. Now, deconfigure it by |
| 274 | both disabling read/write in bp_ctrl and zeroing its |
| 275 | start/end addresses. */ |
| 276 | bp_ctrl &= ~(3 << (2 + (bp * 4))); |
| 277 | /* Setup the configuration register. */ |
| 278 | supply_register_by_name (regcache, "s0", &bp_ctrl); |
| 279 | |
| 280 | start = end = 0; |
| 281 | /* Configure the watchpoint register. */ |
| 282 | cris_write_data_breakpoint (regcache, bp, start, end); |
| 283 | |
| 284 | /* Note that we don't clear the S1 flag here. It's done when continuing. */ |
| 285 | return 0; |
| 286 | } |
| 287 | |
| 288 | static int |
| 289 | cris_stopped_by_watchpoint (void) |
| 290 | { |
| 291 | unsigned long exs; |
| 292 | struct regcache *regcache = get_thread_regcache (current_thread, 1); |
| 293 | |
| 294 | collect_register_by_name (regcache, "exs", &exs); |
| 295 | |
| 296 | return (((exs & 0xff00) >> 8) == 0xc); |
| 297 | } |
| 298 | |
| 299 | static CORE_ADDR |
| 300 | cris_stopped_data_address (void) |
| 301 | { |
| 302 | unsigned long eda; |
| 303 | struct regcache *regcache = get_thread_regcache (current_thread, 1); |
| 304 | |
| 305 | collect_register_by_name (regcache, "eda", &eda); |
| 306 | |
| 307 | /* FIXME: Possibly adjust to match watched range. */ |
| 308 | return eda; |
| 309 | } |
| 310 | |
| 311 | ps_err_e |
| 312 | ps_get_thread_area (struct ps_prochandle *ph, |
| 313 | lwpid_t lwpid, int idx, void **base) |
| 314 | { |
| 315 | if (ptrace (PTRACE_GET_THREAD_AREA, lwpid, NULL, base) != 0) |
| 316 | return PS_ERR; |
| 317 | |
| 318 | /* IDX is the bias from the thread pointer to the beginning of the |
| 319 | thread descriptor. It has to be subtracted due to implementation |
| 320 | quirks in libthread_db. */ |
| 321 | *base = (void *) ((char *) *base - idx); |
| 322 | return PS_OK; |
| 323 | } |
| 324 | |
| 325 | static void |
| 326 | cris_fill_gregset (struct regcache *regcache, void *buf) |
| 327 | { |
| 328 | int i; |
| 329 | |
| 330 | for (i = 0; i < cris_num_regs; i++) |
| 331 | { |
| 332 | if (cris_regmap[i] != -1) |
| 333 | collect_register (regcache, i, ((char *) buf) + cris_regmap[i]); |
| 334 | } |
| 335 | } |
| 336 | |
| 337 | static void |
| 338 | cris_store_gregset (struct regcache *regcache, const void *buf) |
| 339 | { |
| 340 | int i; |
| 341 | |
| 342 | for (i = 0; i < cris_num_regs; i++) |
| 343 | { |
| 344 | if (cris_regmap[i] != -1) |
| 345 | supply_register (regcache, i, ((char *) buf) + cris_regmap[i]); |
| 346 | } |
| 347 | } |
| 348 | |
| 349 | static void |
| 350 | cris_arch_setup (void) |
| 351 | { |
| 352 | current_process ()->tdesc = tdesc_crisv32; |
| 353 | } |
| 354 | |
| 355 | /* Support for hardware single step. */ |
| 356 | |
| 357 | static int |
| 358 | cris_supports_hardware_single_step (void) |
| 359 | { |
| 360 | return 1; |
| 361 | } |
| 362 | |
| 363 | static struct regset_info cris_regsets[] = { |
| 364 | { PTRACE_GETREGS, PTRACE_SETREGS, 0, cris_num_regs * 4, |
| 365 | GENERAL_REGS, cris_fill_gregset, cris_store_gregset }, |
| 366 | NULL_REGSET |
| 367 | }; |
| 368 | |
| 369 | |
| 370 | static struct regsets_info cris_regsets_info = |
| 371 | { |
| 372 | cris_regsets, /* regsets */ |
| 373 | 0, /* num_regsets */ |
| 374 | NULL, /* disabled_regsets */ |
| 375 | }; |
| 376 | |
| 377 | static struct usrregs_info cris_usrregs_info = |
| 378 | { |
| 379 | cris_num_regs, |
| 380 | cris_regmap, |
| 381 | }; |
| 382 | |
| 383 | static struct regs_info regs_info = |
| 384 | { |
| 385 | NULL, /* regset_bitmap */ |
| 386 | &cris_usrregs_info, |
| 387 | &cris_regsets_info |
| 388 | }; |
| 389 | |
| 390 | static const struct regs_info * |
| 391 | cris_regs_info (void) |
| 392 | { |
| 393 | return ®s_info; |
| 394 | } |
| 395 | |
| 396 | struct linux_target_ops the_low_target = { |
| 397 | cris_arch_setup, |
| 398 | cris_regs_info, |
| 399 | NULL, |
| 400 | NULL, |
| 401 | NULL, /* fetch_register */ |
| 402 | linux_get_pc_32bit, |
| 403 | linux_set_pc_32bit, |
| 404 | NULL, /* breakpoint_kind_from_pc */ |
| 405 | cris_sw_breakpoint_from_kind, |
| 406 | NULL, /* get_next_pcs */ |
| 407 | 0, |
| 408 | cris_breakpoint_at, |
| 409 | cris_supports_z_point_type, |
| 410 | cris_insert_point, |
| 411 | cris_remove_point, |
| 412 | cris_stopped_by_watchpoint, |
| 413 | cris_stopped_data_address, |
| 414 | NULL, /* collect_ptrace_register */ |
| 415 | NULL, /* supply_ptrace_register */ |
| 416 | NULL, /* siginfo_fixup */ |
| 417 | NULL, /* new_process */ |
| 418 | NULL, /* new_thread */ |
| 419 | NULL, /* delete_thread */ |
| 420 | NULL, /* new_fork */ |
| 421 | NULL, /* prepare_to_resume */ |
| 422 | NULL, /* process_qsupported */ |
| 423 | NULL, /* supports_tracepoints */ |
| 424 | NULL, /* get_thread_area */ |
| 425 | NULL, /* install_fast_tracepoint_jump_pad */ |
| 426 | NULL, /* emit_ops */ |
| 427 | NULL, /* get_min_fast_tracepoint_insn_len */ |
| 428 | NULL, /* supports_range_stepping */ |
| 429 | NULL, /* breakpoint_kind_from_current_state */ |
| 430 | cris_supports_hardware_single_step, |
| 431 | }; |
| 432 | |
| 433 | void |
| 434 | initialize_low_arch (void) |
| 435 | { |
| 436 | init_registers_crisv32 (); |
| 437 | |
| 438 | initialize_regsets_info (&cris_regsets_info); |
| 439 | } |