| 1 | /* Native debugging support for Intel x86 running DJGPP. |
| 2 | Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc. |
| 3 | Written by Robert Hoehne. |
| 4 | |
| 5 | This file is part of GDB. |
| 6 | |
| 7 | This program is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 2 of the License, or |
| 10 | (at your option) any later version. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 59 Temple Place - Suite 330, |
| 20 | Boston, MA 02111-1307, USA. */ |
| 21 | |
| 22 | #include <fcntl.h> |
| 23 | |
| 24 | #include "defs.h" |
| 25 | #include "inferior.h" |
| 26 | #include "gdb_wait.h" |
| 27 | #include "gdbcore.h" |
| 28 | #include "command.h" |
| 29 | #include "gdbcmd.h" |
| 30 | #include "floatformat.h" |
| 31 | #include "buildsym.h" |
| 32 | #include "i387-nat.h" |
| 33 | #include "value.h" |
| 34 | #include "regcache.h" |
| 35 | #include "gdb_string.h" |
| 36 | |
| 37 | #include <stdio.h> /* might be required for __DJGPP_MINOR__ */ |
| 38 | #include <stdlib.h> |
| 39 | #include <ctype.h> |
| 40 | #include <errno.h> |
| 41 | #include <unistd.h> |
| 42 | #include <sys/utsname.h> |
| 43 | #include <io.h> |
| 44 | #include <dos.h> |
| 45 | #include <dpmi.h> |
| 46 | #include <go32.h> |
| 47 | #include <sys/farptr.h> |
| 48 | #include <debug/v2load.h> |
| 49 | #include <debug/dbgcom.h> |
| 50 | #if __DJGPP_MINOR__ > 2 |
| 51 | #include <debug/redir.h> |
| 52 | #endif |
| 53 | |
| 54 | #if __DJGPP_MINOR__ < 3 |
| 55 | /* This code will be provided from DJGPP 2.03 on. Until then I code it |
| 56 | here */ |
| 57 | typedef struct |
| 58 | { |
| 59 | unsigned short sig0; |
| 60 | unsigned short sig1; |
| 61 | unsigned short sig2; |
| 62 | unsigned short sig3; |
| 63 | unsigned short exponent:15; |
| 64 | unsigned short sign:1; |
| 65 | } |
| 66 | NPXREG; |
| 67 | |
| 68 | typedef struct |
| 69 | { |
| 70 | unsigned int control; |
| 71 | unsigned int status; |
| 72 | unsigned int tag; |
| 73 | unsigned int eip; |
| 74 | unsigned int cs; |
| 75 | unsigned int dataptr; |
| 76 | unsigned int datasel; |
| 77 | NPXREG reg[8]; |
| 78 | } |
| 79 | NPX; |
| 80 | |
| 81 | static NPX npx; |
| 82 | |
| 83 | static void save_npx (void); /* Save the FPU of the debugged program */ |
| 84 | static void load_npx (void); /* Restore the FPU of the debugged program */ |
| 85 | |
| 86 | /* ------------------------------------------------------------------------- */ |
| 87 | /* Store the contents of the NPX in the global variable `npx'. */ |
| 88 | /* *INDENT-OFF* */ |
| 89 | |
| 90 | static void |
| 91 | save_npx (void) |
| 92 | { |
| 93 | asm ("inb $0xa0, %%al \n\ |
| 94 | testb $0x20, %%al \n\ |
| 95 | jz 1f \n\ |
| 96 | xorb %%al, %%al \n\ |
| 97 | outb %%al, $0xf0 \n\ |
| 98 | movb $0x20, %%al \n\ |
| 99 | outb %%al, $0xa0 \n\ |
| 100 | outb %%al, $0x20 \n\ |
| 101 | 1: \n\ |
| 102 | fnsave %0 \n\ |
| 103 | fwait " |
| 104 | : "=m" (npx) |
| 105 | : /* No input */ |
| 106 | : "%eax"); |
| 107 | } |
| 108 | |
| 109 | /* *INDENT-ON* */ |
| 110 | |
| 111 | |
| 112 | /* ------------------------------------------------------------------------- */ |
| 113 | /* Reload the contents of the NPX from the global variable `npx'. */ |
| 114 | |
| 115 | static void |
| 116 | load_npx (void) |
| 117 | { |
| 118 | asm ("frstor %0":"=m" (npx)); |
| 119 | } |
| 120 | /* ------------------------------------------------------------------------- */ |
| 121 | /* Stubs for the missing redirection functions. */ |
| 122 | typedef struct { |
| 123 | char *command; |
| 124 | int redirected; |
| 125 | } cmdline_t; |
| 126 | |
| 127 | void |
| 128 | redir_cmdline_delete (cmdline_t *ptr) |
| 129 | { |
| 130 | ptr->redirected = 0; |
| 131 | } |
| 132 | |
| 133 | int |
| 134 | redir_cmdline_parse (const char *args, cmdline_t *ptr) |
| 135 | { |
| 136 | return -1; |
| 137 | } |
| 138 | |
| 139 | int |
| 140 | redir_to_child (cmdline_t *ptr) |
| 141 | { |
| 142 | return 1; |
| 143 | } |
| 144 | |
| 145 | int |
| 146 | redir_to_debugger (cmdline_t *ptr) |
| 147 | { |
| 148 | return 1; |
| 149 | } |
| 150 | |
| 151 | int |
| 152 | redir_debug_init (cmdline_t *ptr) |
| 153 | { |
| 154 | return 0; |
| 155 | } |
| 156 | #endif /* __DJGPP_MINOR < 3 */ |
| 157 | |
| 158 | typedef enum { wp_insert, wp_remove, wp_count } wp_op; |
| 159 | |
| 160 | /* This holds the current reference counts for each debug register. */ |
| 161 | static int dr_ref_count[4]; |
| 162 | |
| 163 | #define SOME_PID 42 |
| 164 | |
| 165 | static int prog_has_started = 0; |
| 166 | static void go32_open (char *name, int from_tty); |
| 167 | static void go32_close (int quitting); |
| 168 | static void go32_attach (char *args, int from_tty); |
| 169 | static void go32_detach (char *args, int from_tty); |
| 170 | static void go32_resume (ptid_t ptid, int step, |
| 171 | enum target_signal siggnal); |
| 172 | static ptid_t go32_wait (ptid_t ptid, |
| 173 | struct target_waitstatus *status); |
| 174 | static void go32_fetch_registers (int regno); |
| 175 | static void store_register (int regno); |
| 176 | static void go32_store_registers (int regno); |
| 177 | static void go32_prepare_to_store (void); |
| 178 | static int go32_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, |
| 179 | int write, |
| 180 | struct mem_attrib *attrib, |
| 181 | struct target_ops *target); |
| 182 | static void go32_files_info (struct target_ops *target); |
| 183 | static void go32_stop (void); |
| 184 | static void go32_kill_inferior (void); |
| 185 | static void go32_create_inferior (char *exec_file, char *args, char **env); |
| 186 | static void go32_mourn_inferior (void); |
| 187 | static int go32_can_run (void); |
| 188 | |
| 189 | static struct target_ops go32_ops; |
| 190 | static void go32_terminal_init (void); |
| 191 | static void go32_terminal_inferior (void); |
| 192 | static void go32_terminal_ours (void); |
| 193 | |
| 194 | #define r_ofs(x) (offsetof(TSS,x)) |
| 195 | |
| 196 | static struct |
| 197 | { |
| 198 | size_t tss_ofs; |
| 199 | size_t size; |
| 200 | } |
| 201 | regno_mapping[] = |
| 202 | { |
| 203 | {r_ofs (tss_eax), 4}, /* normal registers, from a_tss */ |
| 204 | {r_ofs (tss_ecx), 4}, |
| 205 | {r_ofs (tss_edx), 4}, |
| 206 | {r_ofs (tss_ebx), 4}, |
| 207 | {r_ofs (tss_esp), 4}, |
| 208 | {r_ofs (tss_ebp), 4}, |
| 209 | {r_ofs (tss_esi), 4}, |
| 210 | {r_ofs (tss_edi), 4}, |
| 211 | {r_ofs (tss_eip), 4}, |
| 212 | {r_ofs (tss_eflags), 4}, |
| 213 | {r_ofs (tss_cs), 2}, |
| 214 | {r_ofs (tss_ss), 2}, |
| 215 | {r_ofs (tss_ds), 2}, |
| 216 | {r_ofs (tss_es), 2}, |
| 217 | {r_ofs (tss_fs), 2}, |
| 218 | {r_ofs (tss_gs), 2}, |
| 219 | {0, 10}, /* 8 FP registers, from npx.reg[] */ |
| 220 | {1, 10}, |
| 221 | {2, 10}, |
| 222 | {3, 10}, |
| 223 | {4, 10}, |
| 224 | {5, 10}, |
| 225 | {6, 10}, |
| 226 | {7, 10}, |
| 227 | /* The order of the next 7 registers must be consistent |
| 228 | with their numbering in config/i386/tm-i386.h, which see. */ |
| 229 | {0, 2}, /* control word, from npx */ |
| 230 | {4, 2}, /* status word, from npx */ |
| 231 | {8, 2}, /* tag word, from npx */ |
| 232 | {16, 2}, /* last FP exception CS from npx */ |
| 233 | {12, 4}, /* last FP exception EIP from npx */ |
| 234 | {24, 2}, /* last FP exception operand selector from npx */ |
| 235 | {20, 4}, /* last FP exception operand offset from npx */ |
| 236 | {18, 2} /* last FP opcode from npx */ |
| 237 | }; |
| 238 | |
| 239 | static struct |
| 240 | { |
| 241 | int go32_sig; |
| 242 | enum target_signal gdb_sig; |
| 243 | } |
| 244 | sig_map[] = |
| 245 | { |
| 246 | {0, TARGET_SIGNAL_FPE}, |
| 247 | {1, TARGET_SIGNAL_TRAP}, |
| 248 | /* Exception 2 is triggered by the NMI. DJGPP handles it as SIGILL, |
| 249 | but I think SIGBUS is better, since the NMI is usually activated |
| 250 | as a result of a memory parity check failure. */ |
| 251 | {2, TARGET_SIGNAL_BUS}, |
| 252 | {3, TARGET_SIGNAL_TRAP}, |
| 253 | {4, TARGET_SIGNAL_FPE}, |
| 254 | {5, TARGET_SIGNAL_SEGV}, |
| 255 | {6, TARGET_SIGNAL_ILL}, |
| 256 | {7, TARGET_SIGNAL_EMT}, /* no-coprocessor exception */ |
| 257 | {8, TARGET_SIGNAL_SEGV}, |
| 258 | {9, TARGET_SIGNAL_SEGV}, |
| 259 | {10, TARGET_SIGNAL_BUS}, |
| 260 | {11, TARGET_SIGNAL_SEGV}, |
| 261 | {12, TARGET_SIGNAL_SEGV}, |
| 262 | {13, TARGET_SIGNAL_SEGV}, |
| 263 | {14, TARGET_SIGNAL_SEGV}, |
| 264 | {16, TARGET_SIGNAL_FPE}, |
| 265 | {17, TARGET_SIGNAL_BUS}, |
| 266 | {31, TARGET_SIGNAL_ILL}, |
| 267 | {0x1b, TARGET_SIGNAL_INT}, |
| 268 | {0x75, TARGET_SIGNAL_FPE}, |
| 269 | {0x78, TARGET_SIGNAL_ALRM}, |
| 270 | {0x79, TARGET_SIGNAL_INT}, |
| 271 | {0x7a, TARGET_SIGNAL_QUIT}, |
| 272 | {-1, TARGET_SIGNAL_LAST} |
| 273 | }; |
| 274 | |
| 275 | static struct { |
| 276 | enum target_signal gdb_sig; |
| 277 | int djgpp_excepno; |
| 278 | } excepn_map[] = { |
| 279 | {TARGET_SIGNAL_0, -1}, |
| 280 | {TARGET_SIGNAL_ILL, 6}, /* Invalid Opcode */ |
| 281 | {TARGET_SIGNAL_EMT, 7}, /* triggers SIGNOFP */ |
| 282 | {TARGET_SIGNAL_SEGV, 13}, /* GPF */ |
| 283 | {TARGET_SIGNAL_BUS, 17}, /* Alignment Check */ |
| 284 | /* The rest are fake exceptions, see dpmiexcp.c in djlsr*.zip for |
| 285 | details. */ |
| 286 | {TARGET_SIGNAL_TERM, 0x1b}, /* triggers Ctrl-Break type of SIGINT */ |
| 287 | {TARGET_SIGNAL_FPE, 0x75}, |
| 288 | {TARGET_SIGNAL_INT, 0x79}, |
| 289 | {TARGET_SIGNAL_QUIT, 0x7a}, |
| 290 | {TARGET_SIGNAL_ALRM, 0x78}, /* triggers SIGTIMR */ |
| 291 | {TARGET_SIGNAL_PROF, 0x78}, |
| 292 | {TARGET_SIGNAL_LAST, -1} |
| 293 | }; |
| 294 | |
| 295 | static void |
| 296 | go32_open (char *name, int from_tty) |
| 297 | { |
| 298 | printf_unfiltered ("Done. Use the \"run\" command to run the program.\n"); |
| 299 | } |
| 300 | |
| 301 | static void |
| 302 | go32_close (int quitting) |
| 303 | { |
| 304 | } |
| 305 | |
| 306 | static void |
| 307 | go32_attach (char *args, int from_tty) |
| 308 | { |
| 309 | error ("\ |
| 310 | You cannot attach to a running program on this platform.\n\ |
| 311 | Use the `run' command to run DJGPP programs."); |
| 312 | } |
| 313 | |
| 314 | static void |
| 315 | go32_detach (char *args, int from_tty) |
| 316 | { |
| 317 | } |
| 318 | |
| 319 | static int resume_is_step; |
| 320 | static int resume_signal = -1; |
| 321 | |
| 322 | static void |
| 323 | go32_resume (ptid_t ptid, int step, enum target_signal siggnal) |
| 324 | { |
| 325 | int i; |
| 326 | |
| 327 | resume_is_step = step; |
| 328 | |
| 329 | if (siggnal != TARGET_SIGNAL_0 && siggnal != TARGET_SIGNAL_TRAP) |
| 330 | { |
| 331 | for (i = 0, resume_signal = -1; |
| 332 | excepn_map[i].gdb_sig != TARGET_SIGNAL_LAST; i++) |
| 333 | if (excepn_map[i].gdb_sig == siggnal) |
| 334 | { |
| 335 | resume_signal = excepn_map[i].djgpp_excepno; |
| 336 | break; |
| 337 | } |
| 338 | if (resume_signal == -1) |
| 339 | printf_unfiltered ("Cannot deliver signal %s on this platform.\n", |
| 340 | target_signal_to_name (siggnal)); |
| 341 | } |
| 342 | } |
| 343 | |
| 344 | static char child_cwd[FILENAME_MAX]; |
| 345 | |
| 346 | static ptid_t |
| 347 | go32_wait (ptid_t ptid, struct target_waitstatus *status) |
| 348 | { |
| 349 | int i; |
| 350 | unsigned char saved_opcode; |
| 351 | unsigned long INT3_addr = 0; |
| 352 | int stepping_over_INT = 0; |
| 353 | |
| 354 | a_tss.tss_eflags &= 0xfeff; /* reset the single-step flag (TF) */ |
| 355 | if (resume_is_step) |
| 356 | { |
| 357 | /* If the next instruction is INT xx or INTO, we need to handle |
| 358 | them specially. Intel manuals say that these instructions |
| 359 | reset the single-step flag (a.k.a. TF). However, it seems |
| 360 | that, at least in the DPMI environment, and at least when |
| 361 | stepping over the DPMI interrupt 31h, the problem is having |
| 362 | TF set at all when INT 31h is executed: the debuggee either |
| 363 | crashes (and takes the system with it) or is killed by a |
| 364 | SIGTRAP. |
| 365 | |
| 366 | So we need to emulate single-step mode: we put an INT3 opcode |
| 367 | right after the INT xx instruction, let the debuggee run |
| 368 | until it hits INT3 and stops, then restore the original |
| 369 | instruction which we overwrote with the INT3 opcode, and back |
| 370 | up the debuggee's EIP to that instruction. */ |
| 371 | read_child (a_tss.tss_eip, &saved_opcode, 1); |
| 372 | if (saved_opcode == 0xCD || saved_opcode == 0xCE) |
| 373 | { |
| 374 | unsigned char INT3_opcode = 0xCC; |
| 375 | |
| 376 | INT3_addr |
| 377 | = saved_opcode == 0xCD ? a_tss.tss_eip + 2 : a_tss.tss_eip + 1; |
| 378 | stepping_over_INT = 1; |
| 379 | read_child (INT3_addr, &saved_opcode, 1); |
| 380 | write_child (INT3_addr, &INT3_opcode, 1); |
| 381 | } |
| 382 | else |
| 383 | a_tss.tss_eflags |= 0x0100; /* normal instruction: set TF */ |
| 384 | } |
| 385 | |
| 386 | /* The special value FFFFh in tss_trap indicates to run_child that |
| 387 | tss_irqn holds a signal to be delivered to the debuggee. */ |
| 388 | if (resume_signal <= -1) |
| 389 | { |
| 390 | a_tss.tss_trap = 0; |
| 391 | a_tss.tss_irqn = 0xff; |
| 392 | } |
| 393 | else |
| 394 | { |
| 395 | a_tss.tss_trap = 0xffff; /* run_child looks for this */ |
| 396 | a_tss.tss_irqn = resume_signal; |
| 397 | } |
| 398 | |
| 399 | /* The child might change working directory behind our back. The |
| 400 | GDB users won't like the side effects of that when they work with |
| 401 | relative file names, and GDB might be confused by its current |
| 402 | directory not being in sync with the truth. So we always make a |
| 403 | point of changing back to where GDB thinks is its cwd, when we |
| 404 | return control to the debugger, but restore child's cwd before we |
| 405 | run it. */ |
| 406 | /* Initialize child_cwd, before the first call to run_child and not |
| 407 | in the initialization, so the child get also the changed directory |
| 408 | set with the gdb-command "cd ..." */ |
| 409 | if (!*child_cwd) |
| 410 | /* Initialize child's cwd with the current one. */ |
| 411 | getcwd (child_cwd, sizeof (child_cwd)); |
| 412 | |
| 413 | chdir (child_cwd); |
| 414 | |
| 415 | #if __DJGPP_MINOR__ < 3 |
| 416 | load_npx (); |
| 417 | #endif |
| 418 | run_child (); |
| 419 | #if __DJGPP_MINOR__ < 3 |
| 420 | save_npx (); |
| 421 | #endif |
| 422 | |
| 423 | /* Did we step over an INT xx instruction? */ |
| 424 | if (stepping_over_INT && a_tss.tss_eip == INT3_addr + 1) |
| 425 | { |
| 426 | /* Restore the original opcode. */ |
| 427 | a_tss.tss_eip--; /* EIP points *after* the INT3 instruction */ |
| 428 | write_child (a_tss.tss_eip, &saved_opcode, 1); |
| 429 | /* Simulate a TRAP exception. */ |
| 430 | a_tss.tss_irqn = 1; |
| 431 | a_tss.tss_eflags |= 0x0100; |
| 432 | } |
| 433 | |
| 434 | getcwd (child_cwd, sizeof (child_cwd)); /* in case it has changed */ |
| 435 | chdir (current_directory); |
| 436 | |
| 437 | if (a_tss.tss_irqn == 0x21) |
| 438 | { |
| 439 | status->kind = TARGET_WAITKIND_EXITED; |
| 440 | status->value.integer = a_tss.tss_eax & 0xff; |
| 441 | } |
| 442 | else |
| 443 | { |
| 444 | status->value.sig = TARGET_SIGNAL_UNKNOWN; |
| 445 | status->kind = TARGET_WAITKIND_STOPPED; |
| 446 | for (i = 0; sig_map[i].go32_sig != -1; i++) |
| 447 | { |
| 448 | if (a_tss.tss_irqn == sig_map[i].go32_sig) |
| 449 | { |
| 450 | #if __DJGPP_MINOR__ < 3 |
| 451 | if ((status->value.sig = sig_map[i].gdb_sig) != |
| 452 | TARGET_SIGNAL_TRAP) |
| 453 | status->kind = TARGET_WAITKIND_SIGNALLED; |
| 454 | #else |
| 455 | status->value.sig = sig_map[i].gdb_sig; |
| 456 | #endif |
| 457 | break; |
| 458 | } |
| 459 | } |
| 460 | } |
| 461 | return pid_to_ptid (SOME_PID); |
| 462 | } |
| 463 | |
| 464 | static void |
| 465 | fetch_register (int regno) |
| 466 | { |
| 467 | if (regno < FP0_REGNUM) |
| 468 | supply_register (regno, (char *) &a_tss + regno_mapping[regno].tss_ofs); |
| 469 | else if (FP_REGNUM_P (regno) || FPC_REGNUM_P (regno)) |
| 470 | i387_supply_register (regno, (char *) &npx); |
| 471 | else |
| 472 | internal_error (__FILE__, __LINE__, |
| 473 | "Invalid register no. %d in fetch_register.", regno); |
| 474 | } |
| 475 | |
| 476 | static void |
| 477 | go32_fetch_registers (int regno) |
| 478 | { |
| 479 | if (regno >= 0) |
| 480 | fetch_register (regno); |
| 481 | else |
| 482 | { |
| 483 | for (regno = 0; regno < FP0_REGNUM; regno++) |
| 484 | fetch_register (regno); |
| 485 | i387_supply_fsave ((char *) &npx); |
| 486 | } |
| 487 | } |
| 488 | |
| 489 | static void |
| 490 | store_register (int regno) |
| 491 | { |
| 492 | if (regno < FP0_REGNUM) |
| 493 | regcache_collect (regno, (void *) &a_tss + regno_mapping[regno].tss_ofs); |
| 494 | else if (FP_REGNUM_P (regno) || FPC_REGNUM_P (regno)) |
| 495 | i387_fill_fsave ((char *) &npx, regno); |
| 496 | else |
| 497 | internal_error (__FILE__, __LINE__, |
| 498 | "Invalid register no. %d in store_register.", regno); |
| 499 | } |
| 500 | |
| 501 | static void |
| 502 | go32_store_registers (int regno) |
| 503 | { |
| 504 | unsigned r; |
| 505 | |
| 506 | if (regno >= 0) |
| 507 | store_register (regno); |
| 508 | else |
| 509 | { |
| 510 | for (r = 0; r < FP0_REGNUM; r++) |
| 511 | store_register (r); |
| 512 | i387_fill_fsave ((char *) &npx, -1); |
| 513 | } |
| 514 | } |
| 515 | |
| 516 | static void |
| 517 | go32_prepare_to_store (void) |
| 518 | { |
| 519 | } |
| 520 | |
| 521 | static int |
| 522 | go32_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write, |
| 523 | struct mem_attrib *attrib, struct target_ops *target) |
| 524 | { |
| 525 | if (write) |
| 526 | { |
| 527 | if (write_child (memaddr, myaddr, len)) |
| 528 | { |
| 529 | return 0; |
| 530 | } |
| 531 | else |
| 532 | { |
| 533 | return len; |
| 534 | } |
| 535 | } |
| 536 | else |
| 537 | { |
| 538 | if (read_child (memaddr, myaddr, len)) |
| 539 | { |
| 540 | return 0; |
| 541 | } |
| 542 | else |
| 543 | { |
| 544 | return len; |
| 545 | } |
| 546 | } |
| 547 | } |
| 548 | |
| 549 | static cmdline_t child_cmd; /* parsed child's command line kept here */ |
| 550 | |
| 551 | static void |
| 552 | go32_files_info (struct target_ops *target) |
| 553 | { |
| 554 | printf_unfiltered ("You are running a DJGPP V2 program.\n"); |
| 555 | } |
| 556 | |
| 557 | static void |
| 558 | go32_stop (void) |
| 559 | { |
| 560 | normal_stop (); |
| 561 | cleanup_client (); |
| 562 | inferior_ptid = null_ptid; |
| 563 | prog_has_started = 0; |
| 564 | } |
| 565 | |
| 566 | static void |
| 567 | go32_kill_inferior (void) |
| 568 | { |
| 569 | redir_cmdline_delete (&child_cmd); |
| 570 | resume_signal = -1; |
| 571 | resume_is_step = 0; |
| 572 | unpush_target (&go32_ops); |
| 573 | } |
| 574 | |
| 575 | static void |
| 576 | go32_create_inferior (char *exec_file, char *args, char **env) |
| 577 | { |
| 578 | extern char **environ; |
| 579 | jmp_buf start_state; |
| 580 | char *cmdline; |
| 581 | char **env_save = environ; |
| 582 | size_t cmdlen; |
| 583 | |
| 584 | /* If no exec file handed to us, get it from the exec-file command -- with |
| 585 | a good, common error message if none is specified. */ |
| 586 | if (exec_file == 0) |
| 587 | exec_file = get_exec_file (1); |
| 588 | |
| 589 | if (prog_has_started) |
| 590 | { |
| 591 | go32_stop (); |
| 592 | go32_kill_inferior (); |
| 593 | } |
| 594 | resume_signal = -1; |
| 595 | resume_is_step = 0; |
| 596 | |
| 597 | /* Initialize child's cwd as empty to be initialized when starting |
| 598 | the child. */ |
| 599 | *child_cwd = 0; |
| 600 | |
| 601 | /* Init command line storage. */ |
| 602 | if (redir_debug_init (&child_cmd) == -1) |
| 603 | internal_error (__FILE__, __LINE__, |
| 604 | "Cannot allocate redirection storage: not enough memory.\n"); |
| 605 | |
| 606 | /* Parse the command line and create redirections. */ |
| 607 | if (strpbrk (args, "<>")) |
| 608 | { |
| 609 | if (redir_cmdline_parse (args, &child_cmd) == 0) |
| 610 | args = child_cmd.command; |
| 611 | else |
| 612 | error ("Syntax error in command line."); |
| 613 | } |
| 614 | else |
| 615 | child_cmd.command = xstrdup (args); |
| 616 | |
| 617 | cmdlen = strlen (args); |
| 618 | /* v2loadimage passes command lines via DOS memory, so it cannot |
| 619 | possibly handle commands longer than 1MB. */ |
| 620 | if (cmdlen > 1024*1024) |
| 621 | error ("Command line too long."); |
| 622 | |
| 623 | cmdline = xmalloc (cmdlen + 4); |
| 624 | strcpy (cmdline + 1, args); |
| 625 | /* If the command-line length fits into DOS 126-char limits, use the |
| 626 | DOS command tail format; otherwise, tell v2loadimage to pass it |
| 627 | through a buffer in conventional memory. */ |
| 628 | if (cmdlen < 127) |
| 629 | { |
| 630 | cmdline[0] = strlen (args); |
| 631 | cmdline[cmdlen + 1] = 13; |
| 632 | } |
| 633 | else |
| 634 | cmdline[0] = 0xff; /* signal v2loadimage it's a long command */ |
| 635 | |
| 636 | environ = env; |
| 637 | |
| 638 | if (v2loadimage (exec_file, cmdline, start_state)) |
| 639 | { |
| 640 | environ = env_save; |
| 641 | printf_unfiltered ("Load failed for image %s\n", exec_file); |
| 642 | exit (1); |
| 643 | } |
| 644 | environ = env_save; |
| 645 | xfree (cmdline); |
| 646 | |
| 647 | edi_init (start_state); |
| 648 | #if __DJGPP_MINOR__ < 3 |
| 649 | save_npx (); |
| 650 | #endif |
| 651 | |
| 652 | inferior_ptid = pid_to_ptid (SOME_PID); |
| 653 | push_target (&go32_ops); |
| 654 | clear_proceed_status (); |
| 655 | insert_breakpoints (); |
| 656 | proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0); |
| 657 | prog_has_started = 1; |
| 658 | } |
| 659 | |
| 660 | static void |
| 661 | go32_mourn_inferior (void) |
| 662 | { |
| 663 | /* We need to make sure all the breakpoint enable bits in the DR7 |
| 664 | register are reset when the inferior exits. Otherwise, if they |
| 665 | rerun the inferior, the uncleared bits may cause random SIGTRAPs, |
| 666 | failure to set more watchpoints, and other calamities. It would |
| 667 | be nice if GDB itself would take care to remove all breakpoints |
| 668 | at all times, but it doesn't, probably under an assumption that |
| 669 | the OS cleans up when the debuggee exits. */ |
| 670 | i386_cleanup_dregs (); |
| 671 | go32_kill_inferior (); |
| 672 | generic_mourn_inferior (); |
| 673 | } |
| 674 | |
| 675 | static int |
| 676 | go32_can_run (void) |
| 677 | { |
| 678 | return 1; |
| 679 | } |
| 680 | |
| 681 | /* Hardware watchpoint support. */ |
| 682 | |
| 683 | #define D_REGS edi.dr |
| 684 | #define CONTROL D_REGS[7] |
| 685 | #define STATUS D_REGS[6] |
| 686 | |
| 687 | /* Pass the address ADDR to the inferior in the I'th debug register. |
| 688 | Here we just store the address in D_REGS, the watchpoint will be |
| 689 | actually set up when go32_wait runs the debuggee. */ |
| 690 | void |
| 691 | go32_set_dr (int i, CORE_ADDR addr) |
| 692 | { |
| 693 | if (i < 0 || i > 3) |
| 694 | internal_error (__FILE__, __LINE__, |
| 695 | "Invalid register %d in go32_set_dr.\n", i); |
| 696 | D_REGS[i] = addr; |
| 697 | } |
| 698 | |
| 699 | /* Pass the value VAL to the inferior in the DR7 debug control |
| 700 | register. Here we just store the address in D_REGS, the watchpoint |
| 701 | will be actually set up when go32_wait runs the debuggee. */ |
| 702 | void |
| 703 | go32_set_dr7 (unsigned val) |
| 704 | { |
| 705 | CONTROL = val; |
| 706 | } |
| 707 | |
| 708 | /* Get the value of the DR6 debug status register from the inferior. |
| 709 | Here we just return the value stored in D_REGS, as we've got it |
| 710 | from the last go32_wait call. */ |
| 711 | unsigned |
| 712 | go32_get_dr6 (void) |
| 713 | { |
| 714 | return STATUS; |
| 715 | } |
| 716 | |
| 717 | /* Put the device open on handle FD into either raw or cooked |
| 718 | mode, return 1 if it was in raw mode, zero otherwise. */ |
| 719 | |
| 720 | static int |
| 721 | device_mode (int fd, int raw_p) |
| 722 | { |
| 723 | int oldmode, newmode; |
| 724 | __dpmi_regs regs; |
| 725 | |
| 726 | regs.x.ax = 0x4400; |
| 727 | regs.x.bx = fd; |
| 728 | __dpmi_int (0x21, ®s); |
| 729 | if (regs.x.flags & 1) |
| 730 | return -1; |
| 731 | newmode = oldmode = regs.x.dx; |
| 732 | |
| 733 | if (raw_p) |
| 734 | newmode |= 0x20; |
| 735 | else |
| 736 | newmode &= ~0x20; |
| 737 | |
| 738 | if (oldmode & 0x80) /* Only for character dev */ |
| 739 | { |
| 740 | regs.x.ax = 0x4401; |
| 741 | regs.x.bx = fd; |
| 742 | regs.x.dx = newmode & 0xff; /* Force upper byte zero, else it fails */ |
| 743 | __dpmi_int (0x21, ®s); |
| 744 | if (regs.x.flags & 1) |
| 745 | return -1; |
| 746 | } |
| 747 | return (oldmode & 0x20) == 0x20; |
| 748 | } |
| 749 | |
| 750 | |
| 751 | static int inf_mode_valid = 0; |
| 752 | static int inf_terminal_mode; |
| 753 | |
| 754 | /* This semaphore is needed because, amazingly enough, GDB calls |
| 755 | target.to_terminal_ours more than once after the inferior stops. |
| 756 | But we need the information from the first call only, since the |
| 757 | second call will always see GDB's own cooked terminal. */ |
| 758 | static int terminal_is_ours = 1; |
| 759 | |
| 760 | static void |
| 761 | go32_terminal_init (void) |
| 762 | { |
| 763 | inf_mode_valid = 0; /* reinitialize, in case they are restarting child */ |
| 764 | terminal_is_ours = 1; |
| 765 | } |
| 766 | |
| 767 | static void |
| 768 | go32_terminal_info (char *args, int from_tty) |
| 769 | { |
| 770 | printf_unfiltered ("Inferior's terminal is in %s mode.\n", |
| 771 | !inf_mode_valid |
| 772 | ? "default" : inf_terminal_mode ? "raw" : "cooked"); |
| 773 | |
| 774 | #if __DJGPP_MINOR__ > 2 |
| 775 | if (child_cmd.redirection) |
| 776 | { |
| 777 | int i; |
| 778 | |
| 779 | for (i = 0; i < DBG_HANDLES; i++) |
| 780 | { |
| 781 | if (child_cmd.redirection[i]->file_name) |
| 782 | printf_unfiltered ("\tFile handle %d is redirected to `%s'.\n", |
| 783 | i, child_cmd.redirection[i]->file_name); |
| 784 | else if (_get_dev_info (child_cmd.redirection[i]->inf_handle) == -1) |
| 785 | printf_unfiltered |
| 786 | ("\tFile handle %d appears to be closed by inferior.\n", i); |
| 787 | /* Mask off the raw/cooked bit when comparing device info words. */ |
| 788 | else if ((_get_dev_info (child_cmd.redirection[i]->inf_handle) & 0xdf) |
| 789 | != (_get_dev_info (i) & 0xdf)) |
| 790 | printf_unfiltered |
| 791 | ("\tFile handle %d appears to be redirected by inferior.\n", i); |
| 792 | } |
| 793 | } |
| 794 | #endif |
| 795 | } |
| 796 | |
| 797 | static void |
| 798 | go32_terminal_inferior (void) |
| 799 | { |
| 800 | /* Redirect standard handles as child wants them. */ |
| 801 | errno = 0; |
| 802 | if (redir_to_child (&child_cmd) == -1) |
| 803 | { |
| 804 | redir_to_debugger (&child_cmd); |
| 805 | error ("Cannot redirect standard handles for program: %s.", |
| 806 | strerror (errno)); |
| 807 | } |
| 808 | /* set the console device of the inferior to whatever mode |
| 809 | (raw or cooked) we found it last time */ |
| 810 | if (terminal_is_ours) |
| 811 | { |
| 812 | if (inf_mode_valid) |
| 813 | device_mode (0, inf_terminal_mode); |
| 814 | terminal_is_ours = 0; |
| 815 | } |
| 816 | } |
| 817 | |
| 818 | static void |
| 819 | go32_terminal_ours (void) |
| 820 | { |
| 821 | /* Switch to cooked mode on the gdb terminal and save the inferior |
| 822 | terminal mode to be restored when it is resumed */ |
| 823 | if (!terminal_is_ours) |
| 824 | { |
| 825 | inf_terminal_mode = device_mode (0, 0); |
| 826 | if (inf_terminal_mode != -1) |
| 827 | inf_mode_valid = 1; |
| 828 | else |
| 829 | /* If device_mode returned -1, we don't know what happens with |
| 830 | handle 0 anymore, so make the info invalid. */ |
| 831 | inf_mode_valid = 0; |
| 832 | terminal_is_ours = 1; |
| 833 | |
| 834 | /* Restore debugger's standard handles. */ |
| 835 | errno = 0; |
| 836 | if (redir_to_debugger (&child_cmd) == -1) |
| 837 | { |
| 838 | redir_to_child (&child_cmd); |
| 839 | error ("Cannot redirect standard handles for debugger: %s.", |
| 840 | strerror (errno)); |
| 841 | } |
| 842 | } |
| 843 | } |
| 844 | |
| 845 | static void |
| 846 | init_go32_ops (void) |
| 847 | { |
| 848 | go32_ops.to_shortname = "djgpp"; |
| 849 | go32_ops.to_longname = "djgpp target process"; |
| 850 | go32_ops.to_doc = |
| 851 | "Program loaded by djgpp, when gdb is used as an external debugger"; |
| 852 | go32_ops.to_open = go32_open; |
| 853 | go32_ops.to_close = go32_close; |
| 854 | go32_ops.to_attach = go32_attach; |
| 855 | go32_ops.to_detach = go32_detach; |
| 856 | go32_ops.to_resume = go32_resume; |
| 857 | go32_ops.to_wait = go32_wait; |
| 858 | go32_ops.to_fetch_registers = go32_fetch_registers; |
| 859 | go32_ops.to_store_registers = go32_store_registers; |
| 860 | go32_ops.to_prepare_to_store = go32_prepare_to_store; |
| 861 | go32_ops.to_xfer_memory = go32_xfer_memory; |
| 862 | go32_ops.to_files_info = go32_files_info; |
| 863 | go32_ops.to_insert_breakpoint = memory_insert_breakpoint; |
| 864 | go32_ops.to_remove_breakpoint = memory_remove_breakpoint; |
| 865 | go32_ops.to_terminal_init = go32_terminal_init; |
| 866 | go32_ops.to_terminal_inferior = go32_terminal_inferior; |
| 867 | go32_ops.to_terminal_ours_for_output = go32_terminal_ours; |
| 868 | go32_ops.to_terminal_ours = go32_terminal_ours; |
| 869 | go32_ops.to_terminal_info = go32_terminal_info; |
| 870 | go32_ops.to_kill = go32_kill_inferior; |
| 871 | go32_ops.to_create_inferior = go32_create_inferior; |
| 872 | go32_ops.to_mourn_inferior = go32_mourn_inferior; |
| 873 | go32_ops.to_can_run = go32_can_run; |
| 874 | go32_ops.to_stop = go32_stop; |
| 875 | go32_ops.to_stratum = process_stratum; |
| 876 | go32_ops.to_has_all_memory = 1; |
| 877 | go32_ops.to_has_memory = 1; |
| 878 | go32_ops.to_has_stack = 1; |
| 879 | go32_ops.to_has_registers = 1; |
| 880 | go32_ops.to_has_execution = 1; |
| 881 | go32_ops.to_magic = OPS_MAGIC; |
| 882 | |
| 883 | /* Initialize child's cwd as empty to be initialized when starting |
| 884 | the child. */ |
| 885 | *child_cwd = 0; |
| 886 | |
| 887 | /* Initialize child's command line storage. */ |
| 888 | if (redir_debug_init (&child_cmd) == -1) |
| 889 | internal_error (__FILE__, __LINE__, |
| 890 | "Cannot allocate redirection storage: not enough memory.\n"); |
| 891 | |
| 892 | /* We are always processing GCC-compiled programs. */ |
| 893 | processing_gcc_compilation = 2; |
| 894 | } |
| 895 | |
| 896 | unsigned short windows_major, windows_minor; |
| 897 | |
| 898 | /* Compute the version Windows reports via Int 2Fh/AX=1600h. */ |
| 899 | static void |
| 900 | go32_get_windows_version(void) |
| 901 | { |
| 902 | __dpmi_regs r; |
| 903 | |
| 904 | r.x.ax = 0x1600; |
| 905 | __dpmi_int(0x2f, &r); |
| 906 | if (r.h.al > 2 && r.h.al != 0x80 && r.h.al != 0xff |
| 907 | && (r.h.al > 3 || r.h.ah > 0)) |
| 908 | { |
| 909 | windows_major = r.h.al; |
| 910 | windows_minor = r.h.ah; |
| 911 | } |
| 912 | else |
| 913 | windows_major = 0xff; /* meaning no Windows */ |
| 914 | } |
| 915 | |
| 916 | /* A subroutine of go32_sysinfo to display memory info. */ |
| 917 | static void |
| 918 | print_mem (unsigned long datum, const char *header, int in_pages_p) |
| 919 | { |
| 920 | if (datum != 0xffffffffUL) |
| 921 | { |
| 922 | if (in_pages_p) |
| 923 | datum <<= 12; |
| 924 | puts_filtered (header); |
| 925 | if (datum > 1024) |
| 926 | { |
| 927 | printf_filtered ("%lu KB", datum >> 10); |
| 928 | if (datum > 1024 * 1024) |
| 929 | printf_filtered (" (%lu MB)", datum >> 20); |
| 930 | } |
| 931 | else |
| 932 | printf_filtered ("%lu Bytes", datum); |
| 933 | puts_filtered ("\n"); |
| 934 | } |
| 935 | } |
| 936 | |
| 937 | /* Display assorted information about the underlying OS. */ |
| 938 | static void |
| 939 | go32_sysinfo (char *arg, int from_tty) |
| 940 | { |
| 941 | struct utsname u; |
| 942 | char cpuid_vendor[13]; |
| 943 | unsigned cpuid_max = 0, cpuid_eax, cpuid_ebx, cpuid_ecx, cpuid_edx; |
| 944 | unsigned true_dos_version = _get_dos_version (1); |
| 945 | unsigned advertized_dos_version = ((unsigned int)_osmajor << 8) | _osminor; |
| 946 | int dpmi_flags; |
| 947 | char dpmi_vendor_info[129]; |
| 948 | int dpmi_vendor_available = |
| 949 | __dpmi_get_capabilities (&dpmi_flags, dpmi_vendor_info); |
| 950 | __dpmi_version_ret dpmi_version_data; |
| 951 | long eflags; |
| 952 | __dpmi_free_mem_info mem_info; |
| 953 | __dpmi_regs regs; |
| 954 | |
| 955 | cpuid_vendor[0] = '\0'; |
| 956 | if (uname (&u)) |
| 957 | strcpy (u.machine, "Unknown x86"); |
| 958 | else if (u.machine[0] == 'i' && u.machine[1] > 4) |
| 959 | { |
| 960 | /* CPUID with EAX = 0 returns the Vendor ID. */ |
| 961 | __asm__ __volatile__ ("xorl %%ebx, %%ebx;" |
| 962 | "xorl %%ecx, %%ecx;" |
| 963 | "xorl %%edx, %%edx;" |
| 964 | "movl $0, %%eax;" |
| 965 | "cpuid;" |
| 966 | "movl %%ebx, %0;" |
| 967 | "movl %%edx, %1;" |
| 968 | "movl %%ecx, %2;" |
| 969 | "movl %%eax, %3;" |
| 970 | : "=m" (cpuid_vendor[0]), |
| 971 | "=m" (cpuid_vendor[4]), |
| 972 | "=m" (cpuid_vendor[8]), |
| 973 | "=m" (cpuid_max) |
| 974 | : |
| 975 | : "%eax", "%ebx", "%ecx", "%edx"); |
| 976 | cpuid_vendor[12] = '\0'; |
| 977 | } |
| 978 | |
| 979 | printf_filtered ("CPU Type.......................%s", u.machine); |
| 980 | if (cpuid_vendor[0]) |
| 981 | printf_filtered (" (%s)", cpuid_vendor); |
| 982 | puts_filtered ("\n"); |
| 983 | |
| 984 | /* CPUID with EAX = 1 returns processor signature and features. */ |
| 985 | if (cpuid_max >= 1) |
| 986 | { |
| 987 | static char *brand_name[] = { |
| 988 | "", |
| 989 | " Celeron", |
| 990 | " III", |
| 991 | " III Xeon", |
| 992 | "", "", "", "", |
| 993 | " 4" |
| 994 | }; |
| 995 | char cpu_string[80]; |
| 996 | char cpu_brand[20]; |
| 997 | unsigned brand_idx; |
| 998 | int intel_p = strcmp (cpuid_vendor, "GenuineIntel") == 0; |
| 999 | int amd_p = strcmp (cpuid_vendor, "AuthenticAMD") == 0; |
| 1000 | unsigned cpu_family, cpu_model; |
| 1001 | |
| 1002 | __asm__ __volatile__ ("movl $1, %%eax;" |
| 1003 | "cpuid;" |
| 1004 | : "=a" (cpuid_eax), |
| 1005 | "=b" (cpuid_ebx), |
| 1006 | "=d" (cpuid_edx) |
| 1007 | : |
| 1008 | : "%ecx"); |
| 1009 | brand_idx = cpuid_ebx & 0xff; |
| 1010 | cpu_family = (cpuid_eax >> 8) & 0xf; |
| 1011 | cpu_model = (cpuid_eax >> 4) & 0xf; |
| 1012 | cpu_brand[0] = '\0'; |
| 1013 | if (intel_p) |
| 1014 | { |
| 1015 | if (brand_idx > 0 |
| 1016 | && brand_idx < sizeof(brand_name)/sizeof(brand_name[0]) |
| 1017 | && *brand_name[brand_idx]) |
| 1018 | strcpy (cpu_brand, brand_name[brand_idx]); |
| 1019 | else if (cpu_family == 5) |
| 1020 | { |
| 1021 | if (((cpuid_eax >> 12) & 3) == 0 && cpu_model == 4) |
| 1022 | strcpy (cpu_brand, " MMX"); |
| 1023 | else if (cpu_model > 1 && ((cpuid_eax >> 12) & 3) == 1) |
| 1024 | strcpy (cpu_brand, " OverDrive"); |
| 1025 | else if (cpu_model > 1 && ((cpuid_eax >> 12) & 3) == 2) |
| 1026 | strcpy (cpu_brand, " Dual"); |
| 1027 | } |
| 1028 | else if (cpu_family == 6 && cpu_model < 8) |
| 1029 | { |
| 1030 | switch (cpu_model) |
| 1031 | { |
| 1032 | case 1: |
| 1033 | strcpy (cpu_brand, " Pro"); |
| 1034 | break; |
| 1035 | case 3: |
| 1036 | strcpy (cpu_brand, " II"); |
| 1037 | break; |
| 1038 | case 5: |
| 1039 | strcpy (cpu_brand, " II Xeon"); |
| 1040 | break; |
| 1041 | case 6: |
| 1042 | strcpy (cpu_brand, " Celeron"); |
| 1043 | break; |
| 1044 | case 7: |
| 1045 | strcpy (cpu_brand, " III"); |
| 1046 | break; |
| 1047 | } |
| 1048 | } |
| 1049 | } |
| 1050 | else if (amd_p) |
| 1051 | { |
| 1052 | switch (cpu_family) |
| 1053 | { |
| 1054 | case 4: |
| 1055 | strcpy (cpu_brand, "486/5x86"); |
| 1056 | break; |
| 1057 | case 5: |
| 1058 | switch (cpu_model) |
| 1059 | { |
| 1060 | case 0: |
| 1061 | case 1: |
| 1062 | case 2: |
| 1063 | case 3: |
| 1064 | strcpy (cpu_brand, "-K5"); |
| 1065 | break; |
| 1066 | case 6: |
| 1067 | case 7: |
| 1068 | strcpy (cpu_brand, "-K6"); |
| 1069 | break; |
| 1070 | case 8: |
| 1071 | strcpy (cpu_brand, "-K6-2"); |
| 1072 | break; |
| 1073 | case 9: |
| 1074 | strcpy (cpu_brand, "-K6-III"); |
| 1075 | break; |
| 1076 | } |
| 1077 | break; |
| 1078 | case 6: |
| 1079 | switch (cpu_model) |
| 1080 | { |
| 1081 | case 1: |
| 1082 | case 2: |
| 1083 | case 4: |
| 1084 | strcpy (cpu_brand, " Athlon"); |
| 1085 | break; |
| 1086 | case 3: |
| 1087 | strcpy (cpu_brand, " Duron"); |
| 1088 | break; |
| 1089 | } |
| 1090 | break; |
| 1091 | } |
| 1092 | } |
| 1093 | sprintf (cpu_string, "%s%s Model %d Stepping %d", |
| 1094 | intel_p ? "Pentium" : (amd_p ? "AMD" : "ix86"), |
| 1095 | cpu_brand, cpu_model, cpuid_eax & 0xf); |
| 1096 | printfi_filtered (31, "%s\n", cpu_string); |
| 1097 | if (((cpuid_edx & (6 | (0x0d << 23))) != 0) |
| 1098 | || ((cpuid_edx & 1) == 0) |
| 1099 | || (amd_p && (cpuid_edx & (3 << 30)) != 0)) |
| 1100 | { |
| 1101 | puts_filtered ("CPU Features..................."); |
| 1102 | /* We only list features which might be useful in the DPMI |
| 1103 | environment. */ |
| 1104 | if ((cpuid_edx & 1) == 0) |
| 1105 | puts_filtered ("No FPU "); /* it's unusual to not have an FPU */ |
| 1106 | if ((cpuid_edx & (1 << 1)) != 0) |
| 1107 | puts_filtered ("VME "); |
| 1108 | if ((cpuid_edx & (1 << 2)) != 0) |
| 1109 | puts_filtered ("DE "); |
| 1110 | if ((cpuid_edx & (1 << 4)) != 0) |
| 1111 | puts_filtered ("TSC "); |
| 1112 | if ((cpuid_edx & (1 << 23)) != 0) |
| 1113 | puts_filtered ("MMX "); |
| 1114 | if ((cpuid_edx & (1 << 25)) != 0) |
| 1115 | puts_filtered ("SSE "); |
| 1116 | if ((cpuid_edx & (1 << 26)) != 0) |
| 1117 | puts_filtered ("SSE2 "); |
| 1118 | if (amd_p) |
| 1119 | { |
| 1120 | if ((cpuid_edx & (1 << 31)) != 0) |
| 1121 | puts_filtered ("3DNow! "); |
| 1122 | if ((cpuid_edx & (1 << 30)) != 0) |
| 1123 | puts_filtered ("3DNow!Ext"); |
| 1124 | } |
| 1125 | puts_filtered ("\n"); |
| 1126 | } |
| 1127 | } |
| 1128 | puts_filtered ("\n"); |
| 1129 | printf_filtered ("DOS Version....................%s %s.%s", |
| 1130 | _os_flavor, u.release, u.version); |
| 1131 | if (true_dos_version != advertized_dos_version) |
| 1132 | printf_filtered (" (disguised as v%d.%d)", _osmajor, _osminor); |
| 1133 | puts_filtered ("\n"); |
| 1134 | if (!windows_major) |
| 1135 | go32_get_windows_version (); |
| 1136 | if (windows_major != 0xff) |
| 1137 | { |
| 1138 | const char *windows_flavor; |
| 1139 | |
| 1140 | printf_filtered ("Windows Version................%d.%02d (Windows ", |
| 1141 | windows_major, windows_minor); |
| 1142 | switch (windows_major) |
| 1143 | { |
| 1144 | case 3: |
| 1145 | windows_flavor = "3.X"; |
| 1146 | break; |
| 1147 | case 4: |
| 1148 | switch (windows_minor) |
| 1149 | { |
| 1150 | case 0: |
| 1151 | windows_flavor = "95, 95A, or 95B"; |
| 1152 | break; |
| 1153 | case 3: |
| 1154 | windows_flavor = "95B OSR2.1 or 95C OSR2.5"; |
| 1155 | break; |
| 1156 | case 10: |
| 1157 | windows_flavor = "98 or 98 SE"; |
| 1158 | break; |
| 1159 | case 90: |
| 1160 | windows_flavor = "ME"; |
| 1161 | break; |
| 1162 | default: |
| 1163 | windows_flavor = "9X"; |
| 1164 | break; |
| 1165 | } |
| 1166 | break; |
| 1167 | default: |
| 1168 | windows_flavor = "??"; |
| 1169 | break; |
| 1170 | } |
| 1171 | printf_filtered ("%s)\n", windows_flavor); |
| 1172 | } |
| 1173 | else if (true_dos_version == 0x532 && advertized_dos_version == 0x500) |
| 1174 | printf_filtered ("Windows Version................Windows NT or Windows 2000\n"); |
| 1175 | puts_filtered ("\n"); |
| 1176 | if (dpmi_vendor_available == 0) |
| 1177 | { |
| 1178 | /* The DPMI spec says the vendor string should be ASCIIZ, but |
| 1179 | I don't trust the vendors to follow that... */ |
| 1180 | if (!memchr (&dpmi_vendor_info[2], 0, 126)) |
| 1181 | dpmi_vendor_info[128] = '\0'; |
| 1182 | printf_filtered ("DPMI Host......................%s v%d.%d (capabilities: %#x)\n", |
| 1183 | &dpmi_vendor_info[2], |
| 1184 | (unsigned)dpmi_vendor_info[0], |
| 1185 | (unsigned)dpmi_vendor_info[1], |
| 1186 | ((unsigned)dpmi_flags & 0x7f)); |
| 1187 | } |
| 1188 | __dpmi_get_version (&dpmi_version_data); |
| 1189 | printf_filtered ("DPMI Version...................%d.%02d\n", |
| 1190 | dpmi_version_data.major, dpmi_version_data.minor); |
| 1191 | printf_filtered ("DPMI Info......................%s-bit DPMI, with%s Virtual Memory support\n", |
| 1192 | (dpmi_version_data.flags & 1) ? "32" : "16", |
| 1193 | (dpmi_version_data.flags & 4) ? "" : "out"); |
| 1194 | printfi_filtered (31, "Interrupts reflected to %s mode\n", |
| 1195 | (dpmi_version_data.flags & 2) ? "V86" : "Real"); |
| 1196 | printfi_filtered (31, "Processor type: i%d86\n", |
| 1197 | dpmi_version_data.cpu); |
| 1198 | printfi_filtered (31, "PIC base interrupt: Master: %#x Slave: %#x\n", |
| 1199 | dpmi_version_data.master_pic, dpmi_version_data.slave_pic); |
| 1200 | |
| 1201 | /* a_tss is only initialized when the debuggee is first run. */ |
| 1202 | if (prog_has_started) |
| 1203 | { |
| 1204 | __asm__ __volatile__ ("pushfl ; popl %0" : "=g" (eflags)); |
| 1205 | printf_filtered ("Protection.....................Ring %d (in %s), with%s I/O protection\n", |
| 1206 | a_tss.tss_cs & 3, (a_tss.tss_cs & 4) ? "LDT" : "GDT", |
| 1207 | (a_tss.tss_cs & 3) > ((eflags >> 12) & 3) ? "" : "out"); |
| 1208 | } |
| 1209 | puts_filtered ("\n"); |
| 1210 | __dpmi_get_free_memory_information (&mem_info); |
| 1211 | print_mem (mem_info.total_number_of_physical_pages, |
| 1212 | "DPMI Total Physical Memory.....", 1); |
| 1213 | print_mem (mem_info.total_number_of_free_pages, |
| 1214 | "DPMI Free Physical Memory......", 1); |
| 1215 | print_mem (mem_info.size_of_paging_file_partition_in_pages, |
| 1216 | "DPMI Swap Space................", 1); |
| 1217 | print_mem (mem_info.linear_address_space_size_in_pages, |
| 1218 | "DPMI Total Linear Address Size.", 1); |
| 1219 | print_mem (mem_info.free_linear_address_space_in_pages, |
| 1220 | "DPMI Free Linear Address Size..", 1); |
| 1221 | print_mem (mem_info.largest_available_free_block_in_bytes, |
| 1222 | "DPMI Largest Free Memory Block.", 0); |
| 1223 | |
| 1224 | regs.h.ah = 0x48; |
| 1225 | regs.x.bx = 0xffff; |
| 1226 | __dpmi_int (0x21, ®s); |
| 1227 | print_mem (regs.x.bx << 4, "Free DOS Memory................", 0); |
| 1228 | regs.x.ax = 0x5800; |
| 1229 | __dpmi_int (0x21, ®s); |
| 1230 | if ((regs.x.flags & 1) == 0) |
| 1231 | { |
| 1232 | static const char *dos_hilo[] = { |
| 1233 | "Low", "", "", "", "High", "", "", "", "High, then Low" |
| 1234 | }; |
| 1235 | static const char *dos_fit[] = { |
| 1236 | "First", "Best", "Last" |
| 1237 | }; |
| 1238 | int hilo_idx = (regs.x.ax >> 4) & 0x0f; |
| 1239 | int fit_idx = regs.x.ax & 0x0f; |
| 1240 | |
| 1241 | if (hilo_idx > 8) |
| 1242 | hilo_idx = 0; |
| 1243 | if (fit_idx > 2) |
| 1244 | fit_idx = 0; |
| 1245 | printf_filtered ("DOS Memory Allocation..........%s memory, %s fit\n", |
| 1246 | dos_hilo[hilo_idx], dos_fit[fit_idx]); |
| 1247 | regs.x.ax = 0x5802; |
| 1248 | __dpmi_int (0x21, ®s); |
| 1249 | if ((regs.x.flags & 1) != 0) |
| 1250 | regs.h.al = 0; |
| 1251 | printfi_filtered (31, "UMBs %sin DOS memory chain\n", |
| 1252 | regs.h.al == 0 ? "not " : ""); |
| 1253 | } |
| 1254 | } |
| 1255 | |
| 1256 | struct seg_descr { |
| 1257 | unsigned short limit0 __attribute__((packed)); |
| 1258 | unsigned short base0 __attribute__((packed)); |
| 1259 | unsigned char base1 __attribute__((packed)); |
| 1260 | unsigned stype:5 __attribute__((packed)); |
| 1261 | unsigned dpl:2 __attribute__((packed)); |
| 1262 | unsigned present:1 __attribute__((packed)); |
| 1263 | unsigned limit1:4 __attribute__((packed)); |
| 1264 | unsigned available:1 __attribute__((packed)); |
| 1265 | unsigned dummy:1 __attribute__((packed)); |
| 1266 | unsigned bit32:1 __attribute__((packed)); |
| 1267 | unsigned page_granular:1 __attribute__((packed)); |
| 1268 | unsigned char base2 __attribute__((packed)); |
| 1269 | }; |
| 1270 | |
| 1271 | struct gate_descr { |
| 1272 | unsigned short offset0 __attribute__((packed)); |
| 1273 | unsigned short selector __attribute__((packed)); |
| 1274 | unsigned param_count:5 __attribute__((packed)); |
| 1275 | unsigned dummy:3 __attribute__((packed)); |
| 1276 | unsigned stype:5 __attribute__((packed)); |
| 1277 | unsigned dpl:2 __attribute__((packed)); |
| 1278 | unsigned present:1 __attribute__((packed)); |
| 1279 | unsigned short offset1 __attribute__((packed)); |
| 1280 | }; |
| 1281 | |
| 1282 | /* Read LEN bytes starting at logical address ADDR, and put the result |
| 1283 | into DEST. Return 1 if success, zero if not. */ |
| 1284 | static int |
| 1285 | read_memory_region (unsigned long addr, void *dest, size_t len) |
| 1286 | { |
| 1287 | unsigned long dos_ds_limit = __dpmi_get_segment_limit (_dos_ds); |
| 1288 | int retval = 1; |
| 1289 | |
| 1290 | /* For the low memory, we can simply use _dos_ds. */ |
| 1291 | if (addr <= dos_ds_limit - len) |
| 1292 | dosmemget (addr, len, dest); |
| 1293 | else |
| 1294 | { |
| 1295 | /* For memory above 1MB we need to set up a special segment to |
| 1296 | be able to access that memory. */ |
| 1297 | int sel = __dpmi_allocate_ldt_descriptors (1); |
| 1298 | |
| 1299 | if (sel <= 0) |
| 1300 | retval = 0; |
| 1301 | else |
| 1302 | { |
| 1303 | int access_rights = __dpmi_get_descriptor_access_rights (sel); |
| 1304 | size_t segment_limit = len - 1; |
| 1305 | |
| 1306 | /* Make sure the crucial bits in the descriptor access |
| 1307 | rights are set correctly. Some DPMI providers might barf |
| 1308 | if we set the segment limit to something that is not an |
| 1309 | integral multiple of 4KB pages if the granularity bit is |
| 1310 | not set to byte-granular, even though the DPMI spec says |
| 1311 | it's the host's responsibility to set that bit correctly. */ |
| 1312 | if (len > 1024 * 1024) |
| 1313 | { |
| 1314 | access_rights |= 0x8000; |
| 1315 | /* Page-granular segments should have the low 12 bits of |
| 1316 | the limit set. */ |
| 1317 | segment_limit |= 0xfff; |
| 1318 | } |
| 1319 | else |
| 1320 | access_rights &= ~0x8000; |
| 1321 | |
| 1322 | if (__dpmi_set_segment_base_address (sel, addr) != -1 |
| 1323 | && __dpmi_set_descriptor_access_rights (sel, access_rights) != -1 |
| 1324 | && __dpmi_set_segment_limit (sel, segment_limit) != -1 |
| 1325 | /* W2K silently fails to set the segment limit, leaving |
| 1326 | it at zero; this test avoids the resulting crash. */ |
| 1327 | && __dpmi_get_segment_limit (sel) >= segment_limit) |
| 1328 | movedata (sel, 0, _my_ds (), (unsigned)dest, len); |
| 1329 | else |
| 1330 | retval = 0; |
| 1331 | |
| 1332 | __dpmi_free_ldt_descriptor (sel); |
| 1333 | } |
| 1334 | } |
| 1335 | return retval; |
| 1336 | } |
| 1337 | |
| 1338 | /* Get a segment descriptor stored at index IDX in the descriptor |
| 1339 | table whose base address is TABLE_BASE. Return the descriptor |
| 1340 | type, or -1 if failure. */ |
| 1341 | static int |
| 1342 | get_descriptor (unsigned long table_base, int idx, void *descr) |
| 1343 | { |
| 1344 | unsigned long addr = table_base + idx * 8; /* 8 bytes per entry */ |
| 1345 | |
| 1346 | if (read_memory_region (addr, descr, 8)) |
| 1347 | return (int)((struct seg_descr *)descr)->stype; |
| 1348 | return -1; |
| 1349 | } |
| 1350 | |
| 1351 | struct dtr_reg { |
| 1352 | unsigned short limit __attribute__((packed)); |
| 1353 | unsigned long base __attribute__((packed)); |
| 1354 | }; |
| 1355 | |
| 1356 | /* Display a segment descriptor stored at index IDX in a descriptor |
| 1357 | table whose type is TYPE and whose base address is BASE_ADDR. If |
| 1358 | FORCE is non-zero, display even invalid descriptors. */ |
| 1359 | static void |
| 1360 | display_descriptor (unsigned type, unsigned long base_addr, int idx, int force) |
| 1361 | { |
| 1362 | struct seg_descr descr; |
| 1363 | struct gate_descr gate; |
| 1364 | |
| 1365 | /* Get the descriptor from the table. */ |
| 1366 | if (idx == 0 && type == 0) |
| 1367 | puts_filtered ("0x000: null descriptor\n"); |
| 1368 | else if (get_descriptor (base_addr, idx, &descr) != -1) |
| 1369 | { |
| 1370 | /* For each type of descriptor table, this has a bit set if the |
| 1371 | corresponding type of selectors is valid in that table. */ |
| 1372 | static unsigned allowed_descriptors[] = { |
| 1373 | 0xffffdafeL, /* GDT */ |
| 1374 | 0x0000c0e0L, /* IDT */ |
| 1375 | 0xffffdafaL /* LDT */ |
| 1376 | }; |
| 1377 | |
| 1378 | /* If the program hasn't started yet, assume the debuggee will |
| 1379 | have the same CPL as the debugger. */ |
| 1380 | int cpl = prog_has_started ? (a_tss.tss_cs & 3) : _my_cs () & 3; |
| 1381 | unsigned long limit = (descr.limit1 << 16) | descr.limit0; |
| 1382 | |
| 1383 | if (descr.present |
| 1384 | && (allowed_descriptors[type] & (1 << descr.stype)) != 0) |
| 1385 | { |
| 1386 | printf_filtered ("0x%03x: ", |
| 1387 | type == 1 |
| 1388 | ? idx : (idx * 8) | (type ? (cpl | 4) : 0)); |
| 1389 | if (descr.page_granular) |
| 1390 | limit = (limit << 12) | 0xfff; /* big segment: low 12 bit set */ |
| 1391 | if (descr.stype == 1 || descr.stype == 2 || descr.stype == 3 |
| 1392 | || descr.stype == 9 || descr.stype == 11 |
| 1393 | || (descr.stype >= 16 && descr.stype < 32)) |
| 1394 | printf_filtered ("base=0x%02x%02x%04x limit=0x%08lx", |
| 1395 | descr.base2, descr.base1, descr.base0, limit); |
| 1396 | |
| 1397 | switch (descr.stype) |
| 1398 | { |
| 1399 | case 1: |
| 1400 | case 3: |
| 1401 | printf_filtered (" 16-bit TSS (task %sactive)", |
| 1402 | descr.stype == 3 ? "" : "in"); |
| 1403 | break; |
| 1404 | case 2: |
| 1405 | puts_filtered (" LDT"); |
| 1406 | break; |
| 1407 | case 4: |
| 1408 | memcpy (&gate, &descr, sizeof gate); |
| 1409 | printf_filtered ("selector=0x%04x offs=0x%04x%04x", |
| 1410 | gate.selector, gate.offset1, gate.offset0); |
| 1411 | printf_filtered (" 16-bit Call Gate (params=%d)", |
| 1412 | gate.param_count); |
| 1413 | break; |
| 1414 | case 5: |
| 1415 | printf_filtered ("TSS selector=0x%04x", descr.base0); |
| 1416 | printfi_filtered (16, "Task Gate"); |
| 1417 | break; |
| 1418 | case 6: |
| 1419 | case 7: |
| 1420 | memcpy (&gate, &descr, sizeof gate); |
| 1421 | printf_filtered ("selector=0x%04x offs=0x%04x%04x", |
| 1422 | gate.selector, gate.offset1, gate.offset0); |
| 1423 | printf_filtered (" 16-bit %s Gate", |
| 1424 | descr.stype == 6 ? "Interrupt" : "Trap"); |
| 1425 | break; |
| 1426 | case 9: |
| 1427 | case 11: |
| 1428 | printf_filtered (" 32-bit TSS (task %sactive)", |
| 1429 | descr.stype == 3 ? "" : "in"); |
| 1430 | break; |
| 1431 | case 12: |
| 1432 | memcpy (&gate, &descr, sizeof gate); |
| 1433 | printf_filtered ("selector=0x%04x offs=0x%04x%04x", |
| 1434 | gate.selector, gate.offset1, gate.offset0); |
| 1435 | printf_filtered (" 32-bit Call Gate (params=%d)", |
| 1436 | gate.param_count); |
| 1437 | break; |
| 1438 | case 14: |
| 1439 | case 15: |
| 1440 | memcpy (&gate, &descr, sizeof gate); |
| 1441 | printf_filtered ("selector=0x%04x offs=0x%04x%04x", |
| 1442 | gate.selector, gate.offset1, gate.offset0); |
| 1443 | printf_filtered (" 32-bit %s Gate", |
| 1444 | descr.stype == 14 ? "Interrupt" : "Trap"); |
| 1445 | break; |
| 1446 | case 16: /* data segments */ |
| 1447 | case 17: |
| 1448 | case 18: |
| 1449 | case 19: |
| 1450 | case 20: |
| 1451 | case 21: |
| 1452 | case 22: |
| 1453 | case 23: |
| 1454 | printf_filtered (" %s-bit Data (%s Exp-%s%s)", |
| 1455 | descr.bit32 ? "32" : "16", |
| 1456 | descr.stype & 2 ? "Read/Write," : "Read-Only, ", |
| 1457 | descr.stype & 4 ? "down" : "up", |
| 1458 | descr.stype & 1 ? "" : ", N.Acc"); |
| 1459 | break; |
| 1460 | case 24: /* code segments */ |
| 1461 | case 25: |
| 1462 | case 26: |
| 1463 | case 27: |
| 1464 | case 28: |
| 1465 | case 29: |
| 1466 | case 30: |
| 1467 | case 31: |
| 1468 | printf_filtered (" %s-bit Code (%s, %sConf%s)", |
| 1469 | descr.bit32 ? "32" : "16", |
| 1470 | descr.stype & 2 ? "Exec/Read" : "Exec-Only", |
| 1471 | descr.stype & 4 ? "" : "N.", |
| 1472 | descr.stype & 1 ? "" : ", N.Acc"); |
| 1473 | break; |
| 1474 | default: |
| 1475 | printf_filtered ("Unknown type 0x%02x", descr.stype); |
| 1476 | break; |
| 1477 | } |
| 1478 | puts_filtered ("\n"); |
| 1479 | } |
| 1480 | else if (force) |
| 1481 | { |
| 1482 | printf_filtered ("0x%03x: ", |
| 1483 | type == 1 |
| 1484 | ? idx : (idx * 8) | (type ? (cpl | 4) : 0)); |
| 1485 | if (!descr.present) |
| 1486 | puts_filtered ("Segment not present\n"); |
| 1487 | else |
| 1488 | printf_filtered ("Segment type 0x%02x is invalid in this table\n", |
| 1489 | descr.stype); |
| 1490 | } |
| 1491 | } |
| 1492 | else if (force) |
| 1493 | printf_filtered ("0x%03x: Cannot read this descriptor\n", idx); |
| 1494 | } |
| 1495 | |
| 1496 | static void |
| 1497 | go32_sldt (char *arg, int from_tty) |
| 1498 | { |
| 1499 | struct dtr_reg gdtr; |
| 1500 | unsigned short ldtr = 0; |
| 1501 | int ldt_idx; |
| 1502 | struct seg_descr ldt_descr; |
| 1503 | long ldt_entry = -1L; |
| 1504 | int cpl = (prog_has_started ? a_tss.tss_cs : _my_cs ()) & 3; |
| 1505 | |
| 1506 | if (arg && *arg) |
| 1507 | { |
| 1508 | while (*arg && isspace(*arg)) |
| 1509 | arg++; |
| 1510 | |
| 1511 | if (*arg) |
| 1512 | { |
| 1513 | ldt_entry = parse_and_eval_long (arg); |
| 1514 | if (ldt_entry < 0 |
| 1515 | || (ldt_entry & 4) == 0 |
| 1516 | || (ldt_entry & 3) != (cpl & 3)) |
| 1517 | error ("Invalid LDT entry 0x%03x.", ldt_entry); |
| 1518 | } |
| 1519 | } |
| 1520 | |
| 1521 | __asm__ __volatile__ ("sgdt %0" : "=m" (gdtr) : /* no inputs */ ); |
| 1522 | __asm__ __volatile__ ("sldt %0" : "=m" (ldtr) : /* no inputs */ ); |
| 1523 | ldt_idx = ldtr / 8; |
| 1524 | if (ldt_idx == 0) |
| 1525 | puts_filtered ("There is no LDT.\n"); |
| 1526 | /* LDT's entry in the GDT must have the type LDT, which is 2. */ |
| 1527 | else if (get_descriptor (gdtr.base, ldt_idx, &ldt_descr) != 2) |
| 1528 | printf_filtered ("LDT is present (at %#x), but unreadable by GDB.\n", |
| 1529 | ldt_descr.base0 |
| 1530 | | (ldt_descr.base1 << 16) |
| 1531 | | (ldt_descr.base2 << 24)); |
| 1532 | else |
| 1533 | { |
| 1534 | unsigned base = |
| 1535 | ldt_descr.base0 |
| 1536 | | (ldt_descr.base1 << 16) |
| 1537 | | (ldt_descr.base2 << 24); |
| 1538 | unsigned limit = ldt_descr.limit0 | (ldt_descr.limit1 << 16); |
| 1539 | int max_entry; |
| 1540 | |
| 1541 | if (ldt_descr.page_granular) |
| 1542 | /* Page-granular segments must have the low 12 bits of their |
| 1543 | limit set. */ |
| 1544 | limit = (limit << 12) | 0xfff; |
| 1545 | /* LDT cannot have more than 8K 8-byte entries, i.e. more than |
| 1546 | 64KB. */ |
| 1547 | if (limit > 0xffff) |
| 1548 | limit = 0xffff; |
| 1549 | |
| 1550 | max_entry = (limit + 1) / 8; |
| 1551 | |
| 1552 | if (ldt_entry >= 0) |
| 1553 | { |
| 1554 | if (ldt_entry > limit) |
| 1555 | error ("Invalid LDT entry %#x: outside valid limits [0..%#x]", |
| 1556 | ldt_entry, limit); |
| 1557 | |
| 1558 | display_descriptor (ldt_descr.stype, base, ldt_entry / 8, 1); |
| 1559 | } |
| 1560 | else |
| 1561 | { |
| 1562 | int i; |
| 1563 | |
| 1564 | for (i = 0; i < max_entry; i++) |
| 1565 | display_descriptor (ldt_descr.stype, base, i, 0); |
| 1566 | } |
| 1567 | } |
| 1568 | } |
| 1569 | |
| 1570 | static void |
| 1571 | go32_sgdt (char *arg, int from_tty) |
| 1572 | { |
| 1573 | struct dtr_reg gdtr; |
| 1574 | long gdt_entry = -1L; |
| 1575 | int max_entry; |
| 1576 | |
| 1577 | if (arg && *arg) |
| 1578 | { |
| 1579 | while (*arg && isspace(*arg)) |
| 1580 | arg++; |
| 1581 | |
| 1582 | if (*arg) |
| 1583 | { |
| 1584 | gdt_entry = parse_and_eval_long (arg); |
| 1585 | if (gdt_entry < 0 || (gdt_entry & 7) != 0) |
| 1586 | error ("Invalid GDT entry 0x%03x: not an integral multiple of 8.", |
| 1587 | gdt_entry); |
| 1588 | } |
| 1589 | } |
| 1590 | |
| 1591 | __asm__ __volatile__ ("sgdt %0" : "=m" (gdtr) : /* no inputs */ ); |
| 1592 | max_entry = (gdtr.limit + 1) / 8; |
| 1593 | |
| 1594 | if (gdt_entry >= 0) |
| 1595 | { |
| 1596 | if (gdt_entry > gdtr.limit) |
| 1597 | error ("Invalid GDT entry %#x: outside valid limits [0..%#x]", |
| 1598 | gdt_entry, gdtr.limit); |
| 1599 | |
| 1600 | display_descriptor (0, gdtr.base, gdt_entry / 8, 1); |
| 1601 | } |
| 1602 | else |
| 1603 | { |
| 1604 | int i; |
| 1605 | |
| 1606 | for (i = 0; i < max_entry; i++) |
| 1607 | display_descriptor (0, gdtr.base, i, 0); |
| 1608 | } |
| 1609 | } |
| 1610 | |
| 1611 | static void |
| 1612 | go32_sidt (char *arg, int from_tty) |
| 1613 | { |
| 1614 | struct dtr_reg idtr; |
| 1615 | long idt_entry = -1L; |
| 1616 | int max_entry; |
| 1617 | |
| 1618 | if (arg && *arg) |
| 1619 | { |
| 1620 | while (*arg && isspace(*arg)) |
| 1621 | arg++; |
| 1622 | |
| 1623 | if (*arg) |
| 1624 | { |
| 1625 | idt_entry = parse_and_eval_long (arg); |
| 1626 | if (idt_entry < 0) |
| 1627 | error ("Invalid (negative) IDT entry %d.", idt_entry); |
| 1628 | } |
| 1629 | } |
| 1630 | |
| 1631 | __asm__ __volatile__ ("sidt %0" : "=m" (idtr) : /* no inputs */ ); |
| 1632 | max_entry = (idtr.limit + 1) / 8; |
| 1633 | if (max_entry > 0x100) /* no more than 256 entries */ |
| 1634 | max_entry = 0x100; |
| 1635 | |
| 1636 | if (idt_entry >= 0) |
| 1637 | { |
| 1638 | if (idt_entry > idtr.limit) |
| 1639 | error ("Invalid IDT entry %#x: outside valid limits [0..%#x]", |
| 1640 | idt_entry, idtr.limit); |
| 1641 | |
| 1642 | display_descriptor (1, idtr.base, idt_entry, 1); |
| 1643 | } |
| 1644 | else |
| 1645 | { |
| 1646 | int i; |
| 1647 | |
| 1648 | for (i = 0; i < max_entry; i++) |
| 1649 | display_descriptor (1, idtr.base, i, 0); |
| 1650 | } |
| 1651 | } |
| 1652 | |
| 1653 | /* Cached linear address of the base of the page directory. For |
| 1654 | now, available only under CWSDPMI. Code based on ideas and |
| 1655 | suggestions from Charles Sandmann <sandmann@clio.rice.edu>. */ |
| 1656 | static unsigned long pdbr; |
| 1657 | |
| 1658 | static unsigned long |
| 1659 | get_cr3 (void) |
| 1660 | { |
| 1661 | unsigned offset; |
| 1662 | unsigned taskreg; |
| 1663 | unsigned long taskbase, cr3; |
| 1664 | struct dtr_reg gdtr; |
| 1665 | |
| 1666 | if (pdbr > 0 && pdbr <= 0xfffff) |
| 1667 | return pdbr; |
| 1668 | |
| 1669 | /* Get the linear address of GDT and the Task Register. */ |
| 1670 | __asm__ __volatile__ ("sgdt %0" : "=m" (gdtr) : /* no inputs */ ); |
| 1671 | __asm__ __volatile__ ("str %0" : "=m" (taskreg) : /* no inputs */ ); |
| 1672 | |
| 1673 | /* Task Register is a segment selector for the TSS of the current |
| 1674 | task. Therefore, it can be used as an index into the GDT to get |
| 1675 | at the segment descriptor for the TSS. To get the index, reset |
| 1676 | the low 3 bits of the selector (which give the CPL). Add 2 to the |
| 1677 | offset to point to the 3 low bytes of the base address. */ |
| 1678 | offset = gdtr.base + (taskreg & 0xfff8) + 2; |
| 1679 | |
| 1680 | |
| 1681 | /* CWSDPMI's task base is always under the 1MB mark. */ |
| 1682 | if (offset > 0xfffff) |
| 1683 | return 0; |
| 1684 | |
| 1685 | _farsetsel (_dos_ds); |
| 1686 | taskbase = _farnspeekl (offset) & 0xffffffU; |
| 1687 | taskbase += _farnspeekl (offset + 2) & 0xff000000U; |
| 1688 | if (taskbase > 0xfffff) |
| 1689 | return 0; |
| 1690 | |
| 1691 | /* CR3 (a.k.a. PDBR, the Page Directory Base Register) is stored at |
| 1692 | offset 1Ch in the TSS. */ |
| 1693 | cr3 = _farnspeekl (taskbase + 0x1c) & ~0xfff; |
| 1694 | if (cr3 > 0xfffff) |
| 1695 | { |
| 1696 | #if 0 /* not fullly supported yet */ |
| 1697 | /* The Page Directory is in UMBs. In that case, CWSDPMI puts |
| 1698 | the first Page Table right below the Page Directory. Thus, |
| 1699 | the first Page Table's entry for its own address and the Page |
| 1700 | Directory entry for that Page Table will hold the same |
| 1701 | physical address. The loop below searches the entire UMB |
| 1702 | range of addresses for such an occurence. */ |
| 1703 | unsigned long addr, pte_idx; |
| 1704 | |
| 1705 | for (addr = 0xb0000, pte_idx = 0xb0; |
| 1706 | pte_idx < 0xff; |
| 1707 | addr += 0x1000, pte_idx++) |
| 1708 | { |
| 1709 | if (((_farnspeekl (addr + 4 * pte_idx) & 0xfffff027) == |
| 1710 | (_farnspeekl (addr + 0x1000) & 0xfffff027)) |
| 1711 | && ((_farnspeekl (addr + 4 * pte_idx + 4) & 0xfffff000) == cr3)) |
| 1712 | { |
| 1713 | cr3 = addr + 0x1000; |
| 1714 | break; |
| 1715 | } |
| 1716 | } |
| 1717 | #endif |
| 1718 | |
| 1719 | if (cr3 > 0xfffff) |
| 1720 | cr3 = 0; |
| 1721 | } |
| 1722 | |
| 1723 | return cr3; |
| 1724 | } |
| 1725 | |
| 1726 | /* Return the N'th Page Directory entry. */ |
| 1727 | static unsigned long |
| 1728 | get_pde (int n) |
| 1729 | { |
| 1730 | unsigned long pde = 0; |
| 1731 | |
| 1732 | if (pdbr && n >= 0 && n < 1024) |
| 1733 | { |
| 1734 | pde = _farpeekl (_dos_ds, pdbr + 4*n); |
| 1735 | } |
| 1736 | return pde; |
| 1737 | } |
| 1738 | |
| 1739 | /* Return the N'th entry of the Page Table whose Page Directory entry |
| 1740 | is PDE. */ |
| 1741 | static unsigned long |
| 1742 | get_pte (unsigned long pde, int n) |
| 1743 | { |
| 1744 | unsigned long pte = 0; |
| 1745 | |
| 1746 | /* pde & 0x80 tests the 4MB page bit. We don't support 4MB |
| 1747 | page tables, for now. */ |
| 1748 | if ((pde & 1) && !(pde & 0x80) && n >= 0 && n < 1024) |
| 1749 | { |
| 1750 | pde &= ~0xfff; /* clear non-address bits */ |
| 1751 | pte = _farpeekl (_dos_ds, pde + 4*n); |
| 1752 | } |
| 1753 | return pte; |
| 1754 | } |
| 1755 | |
| 1756 | /* Display a Page Directory or Page Table entry. IS_DIR, if non-zero, |
| 1757 | says this is a Page Directory entry. If FORCE is non-zero, display |
| 1758 | the entry even if its Present flag is off. OFF is the offset of the |
| 1759 | address from the page's base address. */ |
| 1760 | static void |
| 1761 | display_ptable_entry (unsigned long entry, int is_dir, int force, unsigned off) |
| 1762 | { |
| 1763 | if ((entry & 1) != 0) |
| 1764 | { |
| 1765 | printf_filtered ("Base=0x%05lx000", entry >> 12); |
| 1766 | if ((entry & 0x100) && !is_dir) |
| 1767 | puts_filtered (" Global"); |
| 1768 | if ((entry & 0x40) && !is_dir) |
| 1769 | puts_filtered (" Dirty"); |
| 1770 | printf_filtered (" %sAcc.", (entry & 0x20) ? "" : "Not-"); |
| 1771 | printf_filtered (" %sCached", (entry & 0x10) ? "" : "Not-"); |
| 1772 | printf_filtered (" Write-%s", (entry & 8) ? "Thru" : "Back"); |
| 1773 | printf_filtered (" %s", (entry & 4) ? "Usr" : "Sup"); |
| 1774 | printf_filtered (" Read-%s", (entry & 2) ? "Write" : "Only"); |
| 1775 | if (off) |
| 1776 | printf_filtered (" +0x%x", off); |
| 1777 | puts_filtered ("\n"); |
| 1778 | } |
| 1779 | else if (force) |
| 1780 | printf_filtered ("Page%s not present or not supported; value=0x%lx.\n", |
| 1781 | is_dir ? " Table" : "", entry >> 1); |
| 1782 | } |
| 1783 | |
| 1784 | static void |
| 1785 | go32_pde (char *arg, int from_tty) |
| 1786 | { |
| 1787 | long pde_idx = -1, i; |
| 1788 | |
| 1789 | if (arg && *arg) |
| 1790 | { |
| 1791 | while (*arg && isspace(*arg)) |
| 1792 | arg++; |
| 1793 | |
| 1794 | if (*arg) |
| 1795 | { |
| 1796 | pde_idx = parse_and_eval_long (arg); |
| 1797 | if (pde_idx < 0 || pde_idx >= 1024) |
| 1798 | error ("Entry %ld is outside valid limits [0..1023].", pde_idx); |
| 1799 | } |
| 1800 | } |
| 1801 | |
| 1802 | pdbr = get_cr3 (); |
| 1803 | if (!pdbr) |
| 1804 | puts_filtered ("Access to Page Directories is not supported on this system.\n"); |
| 1805 | else if (pde_idx >= 0) |
| 1806 | display_ptable_entry (get_pde (pde_idx), 1, 1, 0); |
| 1807 | else |
| 1808 | for (i = 0; i < 1024; i++) |
| 1809 | display_ptable_entry (get_pde (i), 1, 0, 0); |
| 1810 | } |
| 1811 | |
| 1812 | /* A helper function to display entries in a Page Table pointed to by |
| 1813 | the N'th entry in the Page Directory. If FORCE is non-zero, say |
| 1814 | something even if the Page Table is not accessible. */ |
| 1815 | static void |
| 1816 | display_page_table (long n, int force) |
| 1817 | { |
| 1818 | unsigned long pde = get_pde (n); |
| 1819 | |
| 1820 | if ((pde & 1) != 0) |
| 1821 | { |
| 1822 | int i; |
| 1823 | |
| 1824 | printf_filtered ("Page Table pointed to by Page Directory entry 0x%lx:\n", n); |
| 1825 | for (i = 0; i < 1024; i++) |
| 1826 | display_ptable_entry (get_pte (pde, i), 0, 0, 0); |
| 1827 | puts_filtered ("\n"); |
| 1828 | } |
| 1829 | else if (force) |
| 1830 | printf_filtered ("Page Table not present; value=0x%lx.\n", pde >> 1); |
| 1831 | } |
| 1832 | |
| 1833 | static void |
| 1834 | go32_pte (char *arg, int from_tty) |
| 1835 | { |
| 1836 | long pde_idx = -1, i; |
| 1837 | |
| 1838 | if (arg && *arg) |
| 1839 | { |
| 1840 | while (*arg && isspace(*arg)) |
| 1841 | arg++; |
| 1842 | |
| 1843 | if (*arg) |
| 1844 | { |
| 1845 | pde_idx = parse_and_eval_long (arg); |
| 1846 | if (pde_idx < 0 || pde_idx >= 1024) |
| 1847 | error ("Entry %d is outside valid limits [0..1023].", pde_idx); |
| 1848 | } |
| 1849 | } |
| 1850 | |
| 1851 | pdbr = get_cr3 (); |
| 1852 | if (!pdbr) |
| 1853 | puts_filtered ("Access to Page Tables is not supported on this system.\n"); |
| 1854 | else if (pde_idx >= 0) |
| 1855 | display_page_table (pde_idx, 1); |
| 1856 | else |
| 1857 | for (i = 0; i < 1024; i++) |
| 1858 | display_page_table (i, 0); |
| 1859 | } |
| 1860 | |
| 1861 | static void |
| 1862 | go32_pte_for_address (char *arg, int from_tty) |
| 1863 | { |
| 1864 | CORE_ADDR addr = 0, i; |
| 1865 | |
| 1866 | if (arg && *arg) |
| 1867 | { |
| 1868 | while (*arg && isspace(*arg)) |
| 1869 | arg++; |
| 1870 | |
| 1871 | if (*arg) |
| 1872 | addr = parse_and_eval_address (arg); |
| 1873 | } |
| 1874 | if (!addr) |
| 1875 | error_no_arg ("linear address"); |
| 1876 | |
| 1877 | pdbr = get_cr3 (); |
| 1878 | if (!pdbr) |
| 1879 | puts_filtered ("Access to Page Tables is not supported on this system.\n"); |
| 1880 | else |
| 1881 | { |
| 1882 | int pde_idx = (addr >> 22) & 0x3ff; |
| 1883 | int pte_idx = (addr >> 12) & 0x3ff; |
| 1884 | unsigned offs = addr & 0xfff; |
| 1885 | |
| 1886 | printf_filtered ("Page Table entry for address 0x%llx:\n", |
| 1887 | (unsigned long long)addr); |
| 1888 | display_ptable_entry (get_pte (get_pde (pde_idx), pte_idx), 0, 1, offs); |
| 1889 | } |
| 1890 | } |
| 1891 | |
| 1892 | static struct cmd_list_element *info_dos_cmdlist = NULL; |
| 1893 | |
| 1894 | static void |
| 1895 | go32_info_dos_command (char *args, int from_tty) |
| 1896 | { |
| 1897 | help_list (info_dos_cmdlist, "info dos ", class_info, gdb_stdout); |
| 1898 | } |
| 1899 | |
| 1900 | void |
| 1901 | _initialize_go32_nat (void) |
| 1902 | { |
| 1903 | init_go32_ops (); |
| 1904 | add_target (&go32_ops); |
| 1905 | |
| 1906 | add_prefix_cmd ("dos", class_info, go32_info_dos_command, |
| 1907 | "Print information specific to DJGPP (a.k.a. MS-DOS) debugging.", |
| 1908 | &info_dos_cmdlist, "info dos ", 0, &infolist); |
| 1909 | |
| 1910 | add_cmd ("sysinfo", class_info, go32_sysinfo, |
| 1911 | "Display information about the target system, including CPU, OS, DPMI, etc.", |
| 1912 | &info_dos_cmdlist); |
| 1913 | add_cmd ("ldt", class_info, go32_sldt, |
| 1914 | "Display entries in the LDT (Local Descriptor Table).\n" |
| 1915 | "Entry number (an expression) as an argument means display only that entry.", |
| 1916 | &info_dos_cmdlist); |
| 1917 | add_cmd ("gdt", class_info, go32_sgdt, |
| 1918 | "Display entries in the GDT (Global Descriptor Table).\n" |
| 1919 | "Entry number (an expression) as an argument means display only that entry.", |
| 1920 | &info_dos_cmdlist); |
| 1921 | add_cmd ("idt", class_info, go32_sidt, |
| 1922 | "Display entries in the IDT (Interrupt Descriptor Table).\n" |
| 1923 | "Entry number (an expression) as an argument means display only that entry.", |
| 1924 | &info_dos_cmdlist); |
| 1925 | add_cmd ("pde", class_info, go32_pde, |
| 1926 | "Display entries in the Page Directory.\n" |
| 1927 | "Entry number (an expression) as an argument means display only that entry.", |
| 1928 | &info_dos_cmdlist); |
| 1929 | add_cmd ("pte", class_info, go32_pte, |
| 1930 | "Display entries in Page Tables.\n" |
| 1931 | "Entry number (an expression) as an argument means display only entries\n" |
| 1932 | "from the Page Table pointed to by the specified Page Directory entry.", |
| 1933 | &info_dos_cmdlist); |
| 1934 | add_cmd ("address-pte", class_info, go32_pte_for_address, |
| 1935 | "Display a Page Table entry for a linear address.\n" |
| 1936 | "The address argument must be a linear address, after adding to\n" |
| 1937 | "it the base address of the appropriate segment.\n" |
| 1938 | "The base address of variables and functions in the debuggee's data\n" |
| 1939 | "or code segment is stored in the variable __djgpp_base_address,\n" |
| 1940 | "so use `__djgpp_base_address + (char *)&var' as the argument.\n" |
| 1941 | "For other segments, look up their base address in the output of\n" |
| 1942 | "the `info dos ldt' command.", |
| 1943 | &info_dos_cmdlist); |
| 1944 | } |
| 1945 | |
| 1946 | pid_t |
| 1947 | tcgetpgrp (int fd) |
| 1948 | { |
| 1949 | if (isatty (fd)) |
| 1950 | return SOME_PID; |
| 1951 | errno = ENOTTY; |
| 1952 | return -1; |
| 1953 | } |
| 1954 | |
| 1955 | int |
| 1956 | tcsetpgrp (int fd, pid_t pgid) |
| 1957 | { |
| 1958 | if (isatty (fd) && pgid == SOME_PID) |
| 1959 | return 0; |
| 1960 | errno = pgid == SOME_PID ? ENOTTY : ENOSYS; |
| 1961 | return -1; |
| 1962 | } |