| 1 | /* Intel 386 target-dependent stuff. |
| 2 | Copyright (C) 1988, 1989, 1991, 1994, 1995, 1996 Free Software Foundation, Inc. |
| 3 | |
| 4 | This file is part of GDB. |
| 5 | |
| 6 | This program is free software; you can redistribute it and/or modify |
| 7 | it under the terms of the GNU General Public License as published by |
| 8 | the Free Software Foundation; either version 2 of the License, or |
| 9 | (at your option) any later version. |
| 10 | |
| 11 | This program is distributed in the hope that it will be useful, |
| 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | GNU General Public License for more details. |
| 15 | |
| 16 | You should have received a copy of the GNU General Public License |
| 17 | along with this program; if not, write to the Free Software |
| 18 | Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ |
| 19 | |
| 20 | #include "defs.h" |
| 21 | #include "gdb_string.h" |
| 22 | #include "frame.h" |
| 23 | #include "inferior.h" |
| 24 | #include "gdbcore.h" |
| 25 | #include "target.h" |
| 26 | #include "floatformat.h" |
| 27 | #include "symtab.h" |
| 28 | #include "gdbcmd.h" |
| 29 | |
| 30 | static long i386_get_frame_setup PARAMS ((CORE_ADDR)); |
| 31 | |
| 32 | static void i386_follow_jump PARAMS ((void)); |
| 33 | |
| 34 | static void codestream_read PARAMS ((unsigned char *, int)); |
| 35 | |
| 36 | static void codestream_seek PARAMS ((CORE_ADDR)); |
| 37 | |
| 38 | static unsigned char codestream_fill PARAMS ((int)); |
| 39 | |
| 40 | /* Stdio style buffering was used to minimize calls to ptrace, but this |
| 41 | buffering did not take into account that the code section being accessed |
| 42 | may not be an even number of buffers long (even if the buffer is only |
| 43 | sizeof(int) long). In cases where the code section size happened to |
| 44 | be a non-integral number of buffers long, attempting to read the last |
| 45 | buffer would fail. Simply using target_read_memory and ignoring errors, |
| 46 | rather than read_memory, is not the correct solution, since legitimate |
| 47 | access errors would then be totally ignored. To properly handle this |
| 48 | situation and continue to use buffering would require that this code |
| 49 | be able to determine the minimum code section size granularity (not the |
| 50 | alignment of the section itself, since the actual failing case that |
| 51 | pointed out this problem had a section alignment of 4 but was not a |
| 52 | multiple of 4 bytes long), on a target by target basis, and then |
| 53 | adjust it's buffer size accordingly. This is messy, but potentially |
| 54 | feasible. It probably needs the bfd library's help and support. For |
| 55 | now, the buffer size is set to 1. (FIXME -fnf) */ |
| 56 | |
| 57 | #define CODESTREAM_BUFSIZ 1 /* Was sizeof(int), see note above. */ |
| 58 | static CORE_ADDR codestream_next_addr; |
| 59 | static CORE_ADDR codestream_addr; |
| 60 | static unsigned char codestream_buf[CODESTREAM_BUFSIZ]; |
| 61 | static int codestream_off; |
| 62 | static int codestream_cnt; |
| 63 | |
| 64 | #define codestream_tell() (codestream_addr + codestream_off) |
| 65 | #define codestream_peek() (codestream_cnt == 0 ? \ |
| 66 | codestream_fill(1): codestream_buf[codestream_off]) |
| 67 | #define codestream_get() (codestream_cnt-- == 0 ? \ |
| 68 | codestream_fill(0) : codestream_buf[codestream_off++]) |
| 69 | |
| 70 | static unsigned char |
| 71 | codestream_fill (peek_flag) |
| 72 | int peek_flag; |
| 73 | { |
| 74 | codestream_addr = codestream_next_addr; |
| 75 | codestream_next_addr += CODESTREAM_BUFSIZ; |
| 76 | codestream_off = 0; |
| 77 | codestream_cnt = CODESTREAM_BUFSIZ; |
| 78 | read_memory (codestream_addr, (char *) codestream_buf, CODESTREAM_BUFSIZ); |
| 79 | |
| 80 | if (peek_flag) |
| 81 | return (codestream_peek()); |
| 82 | else |
| 83 | return (codestream_get()); |
| 84 | } |
| 85 | |
| 86 | static void |
| 87 | codestream_seek (place) |
| 88 | CORE_ADDR place; |
| 89 | { |
| 90 | codestream_next_addr = place / CODESTREAM_BUFSIZ; |
| 91 | codestream_next_addr *= CODESTREAM_BUFSIZ; |
| 92 | codestream_cnt = 0; |
| 93 | codestream_fill (1); |
| 94 | while (codestream_tell() != place) |
| 95 | codestream_get (); |
| 96 | } |
| 97 | |
| 98 | static void |
| 99 | codestream_read (buf, count) |
| 100 | unsigned char *buf; |
| 101 | int count; |
| 102 | { |
| 103 | unsigned char *p; |
| 104 | int i; |
| 105 | p = buf; |
| 106 | for (i = 0; i < count; i++) |
| 107 | *p++ = codestream_get (); |
| 108 | } |
| 109 | |
| 110 | /* next instruction is a jump, move to target */ |
| 111 | |
| 112 | static void |
| 113 | i386_follow_jump () |
| 114 | { |
| 115 | unsigned char buf[4]; |
| 116 | long delta; |
| 117 | |
| 118 | int data16; |
| 119 | CORE_ADDR pos; |
| 120 | |
| 121 | pos = codestream_tell (); |
| 122 | |
| 123 | data16 = 0; |
| 124 | if (codestream_peek () == 0x66) |
| 125 | { |
| 126 | codestream_get (); |
| 127 | data16 = 1; |
| 128 | } |
| 129 | |
| 130 | switch (codestream_get ()) |
| 131 | { |
| 132 | case 0xe9: |
| 133 | /* relative jump: if data16 == 0, disp32, else disp16 */ |
| 134 | if (data16) |
| 135 | { |
| 136 | codestream_read (buf, 2); |
| 137 | delta = extract_signed_integer (buf, 2); |
| 138 | |
| 139 | /* include size of jmp inst (including the 0x66 prefix). */ |
| 140 | pos += delta + 4; |
| 141 | } |
| 142 | else |
| 143 | { |
| 144 | codestream_read (buf, 4); |
| 145 | delta = extract_signed_integer (buf, 4); |
| 146 | |
| 147 | pos += delta + 5; |
| 148 | } |
| 149 | break; |
| 150 | case 0xeb: |
| 151 | /* relative jump, disp8 (ignore data16) */ |
| 152 | codestream_read (buf, 1); |
| 153 | /* Sign-extend it. */ |
| 154 | delta = extract_signed_integer (buf, 1); |
| 155 | |
| 156 | pos += delta + 2; |
| 157 | break; |
| 158 | } |
| 159 | codestream_seek (pos); |
| 160 | } |
| 161 | |
| 162 | /* |
| 163 | * find & return amound a local space allocated, and advance codestream to |
| 164 | * first register push (if any) |
| 165 | * |
| 166 | * if entry sequence doesn't make sense, return -1, and leave |
| 167 | * codestream pointer random |
| 168 | */ |
| 169 | |
| 170 | static long |
| 171 | i386_get_frame_setup (pc) |
| 172 | CORE_ADDR pc; |
| 173 | { |
| 174 | unsigned char op; |
| 175 | |
| 176 | codestream_seek (pc); |
| 177 | |
| 178 | i386_follow_jump (); |
| 179 | |
| 180 | op = codestream_get (); |
| 181 | |
| 182 | if (op == 0x58) /* popl %eax */ |
| 183 | { |
| 184 | /* |
| 185 | * this function must start with |
| 186 | * |
| 187 | * popl %eax 0x58 |
| 188 | * xchgl %eax, (%esp) 0x87 0x04 0x24 |
| 189 | * or xchgl %eax, 0(%esp) 0x87 0x44 0x24 0x00 |
| 190 | * |
| 191 | * (the system 5 compiler puts out the second xchg |
| 192 | * inst, and the assembler doesn't try to optimize it, |
| 193 | * so the 'sib' form gets generated) |
| 194 | * |
| 195 | * this sequence is used to get the address of the return |
| 196 | * buffer for a function that returns a structure |
| 197 | */ |
| 198 | int pos; |
| 199 | unsigned char buf[4]; |
| 200 | static unsigned char proto1[3] = { 0x87,0x04,0x24 }; |
| 201 | static unsigned char proto2[4] = { 0x87,0x44,0x24,0x00 }; |
| 202 | pos = codestream_tell (); |
| 203 | codestream_read (buf, 4); |
| 204 | if (memcmp (buf, proto1, 3) == 0) |
| 205 | pos += 3; |
| 206 | else if (memcmp (buf, proto2, 4) == 0) |
| 207 | pos += 4; |
| 208 | |
| 209 | codestream_seek (pos); |
| 210 | op = codestream_get (); /* update next opcode */ |
| 211 | } |
| 212 | |
| 213 | if (op == 0x55) /* pushl %ebp */ |
| 214 | { |
| 215 | /* check for movl %esp, %ebp - can be written two ways */ |
| 216 | switch (codestream_get ()) |
| 217 | { |
| 218 | case 0x8b: |
| 219 | if (codestream_get () != 0xec) |
| 220 | return (-1); |
| 221 | break; |
| 222 | case 0x89: |
| 223 | if (codestream_get () != 0xe5) |
| 224 | return (-1); |
| 225 | break; |
| 226 | default: |
| 227 | return (-1); |
| 228 | } |
| 229 | /* check for stack adjustment |
| 230 | * |
| 231 | * subl $XXX, %esp |
| 232 | * |
| 233 | * note: you can't subtract a 16 bit immediate |
| 234 | * from a 32 bit reg, so we don't have to worry |
| 235 | * about a data16 prefix |
| 236 | */ |
| 237 | op = codestream_peek (); |
| 238 | if (op == 0x83) |
| 239 | { |
| 240 | /* subl with 8 bit immed */ |
| 241 | codestream_get (); |
| 242 | if (codestream_get () != 0xec) |
| 243 | /* Some instruction starting with 0x83 other than subl. */ |
| 244 | { |
| 245 | codestream_seek (codestream_tell () - 2); |
| 246 | return 0; |
| 247 | } |
| 248 | /* subl with signed byte immediate |
| 249 | * (though it wouldn't make sense to be negative) |
| 250 | */ |
| 251 | return (codestream_get()); |
| 252 | } |
| 253 | else if (op == 0x81) |
| 254 | { |
| 255 | char buf[4]; |
| 256 | /* Maybe it is subl with 32 bit immedediate. */ |
| 257 | codestream_get(); |
| 258 | if (codestream_get () != 0xec) |
| 259 | /* Some instruction starting with 0x81 other than subl. */ |
| 260 | { |
| 261 | codestream_seek (codestream_tell () - 2); |
| 262 | return 0; |
| 263 | } |
| 264 | /* It is subl with 32 bit immediate. */ |
| 265 | codestream_read ((unsigned char *)buf, 4); |
| 266 | return extract_signed_integer (buf, 4); |
| 267 | } |
| 268 | else |
| 269 | { |
| 270 | return (0); |
| 271 | } |
| 272 | } |
| 273 | else if (op == 0xc8) |
| 274 | { |
| 275 | char buf[2]; |
| 276 | /* enter instruction: arg is 16 bit unsigned immed */ |
| 277 | codestream_read ((unsigned char *)buf, 2); |
| 278 | codestream_get (); /* flush final byte of enter instruction */ |
| 279 | return extract_unsigned_integer (buf, 2); |
| 280 | } |
| 281 | return (-1); |
| 282 | } |
| 283 | |
| 284 | /* Return number of args passed to a frame. |
| 285 | Can return -1, meaning no way to tell. */ |
| 286 | |
| 287 | int |
| 288 | i386_frame_num_args (fi) |
| 289 | struct frame_info *fi; |
| 290 | { |
| 291 | #if 1 |
| 292 | return -1; |
| 293 | #else |
| 294 | /* This loses because not only might the compiler not be popping the |
| 295 | args right after the function call, it might be popping args from both |
| 296 | this call and a previous one, and we would say there are more args |
| 297 | than there really are. */ |
| 298 | |
| 299 | int retpc; |
| 300 | unsigned char op; |
| 301 | struct frame_info *pfi; |
| 302 | |
| 303 | /* on the 386, the instruction following the call could be: |
| 304 | popl %ecx - one arg |
| 305 | addl $imm, %esp - imm/4 args; imm may be 8 or 32 bits |
| 306 | anything else - zero args */ |
| 307 | |
| 308 | int frameless; |
| 309 | |
| 310 | FRAMELESS_FUNCTION_INVOCATION (fi, frameless); |
| 311 | if (frameless) |
| 312 | /* In the absence of a frame pointer, GDB doesn't get correct values |
| 313 | for nameless arguments. Return -1, so it doesn't print any |
| 314 | nameless arguments. */ |
| 315 | return -1; |
| 316 | |
| 317 | pfi = get_prev_frame_info (fi); |
| 318 | if (pfi == 0) |
| 319 | { |
| 320 | /* Note: this can happen if we are looking at the frame for |
| 321 | main, because FRAME_CHAIN_VALID won't let us go into |
| 322 | start. If we have debugging symbols, that's not really |
| 323 | a big deal; it just means it will only show as many arguments |
| 324 | to main as are declared. */ |
| 325 | return -1; |
| 326 | } |
| 327 | else |
| 328 | { |
| 329 | retpc = pfi->pc; |
| 330 | op = read_memory_integer (retpc, 1); |
| 331 | if (op == 0x59) |
| 332 | /* pop %ecx */ |
| 333 | return 1; |
| 334 | else if (op == 0x83) |
| 335 | { |
| 336 | op = read_memory_integer (retpc+1, 1); |
| 337 | if (op == 0xc4) |
| 338 | /* addl $<signed imm 8 bits>, %esp */ |
| 339 | return (read_memory_integer (retpc+2,1)&0xff)/4; |
| 340 | else |
| 341 | return 0; |
| 342 | } |
| 343 | else if (op == 0x81) |
| 344 | { /* add with 32 bit immediate */ |
| 345 | op = read_memory_integer (retpc+1, 1); |
| 346 | if (op == 0xc4) |
| 347 | /* addl $<imm 32>, %esp */ |
| 348 | return read_memory_integer (retpc+2, 4) / 4; |
| 349 | else |
| 350 | return 0; |
| 351 | } |
| 352 | else |
| 353 | { |
| 354 | return 0; |
| 355 | } |
| 356 | } |
| 357 | #endif |
| 358 | } |
| 359 | |
| 360 | /* |
| 361 | * parse the first few instructions of the function to see |
| 362 | * what registers were stored. |
| 363 | * |
| 364 | * We handle these cases: |
| 365 | * |
| 366 | * The startup sequence can be at the start of the function, |
| 367 | * or the function can start with a branch to startup code at the end. |
| 368 | * |
| 369 | * %ebp can be set up with either the 'enter' instruction, or |
| 370 | * 'pushl %ebp, movl %esp, %ebp' (enter is too slow to be useful, |
| 371 | * but was once used in the sys5 compiler) |
| 372 | * |
| 373 | * Local space is allocated just below the saved %ebp by either the |
| 374 | * 'enter' instruction, or by 'subl $<size>, %esp'. 'enter' has |
| 375 | * a 16 bit unsigned argument for space to allocate, and the |
| 376 | * 'addl' instruction could have either a signed byte, or |
| 377 | * 32 bit immediate. |
| 378 | * |
| 379 | * Next, the registers used by this function are pushed. In |
| 380 | * the sys5 compiler they will always be in the order: %edi, %esi, %ebx |
| 381 | * (and sometimes a harmless bug causes it to also save but not restore %eax); |
| 382 | * however, the code below is willing to see the pushes in any order, |
| 383 | * and will handle up to 8 of them. |
| 384 | * |
| 385 | * If the setup sequence is at the end of the function, then the |
| 386 | * next instruction will be a branch back to the start. |
| 387 | */ |
| 388 | |
| 389 | void |
| 390 | i386_frame_find_saved_regs (fip, fsrp) |
| 391 | struct frame_info *fip; |
| 392 | struct frame_saved_regs *fsrp; |
| 393 | { |
| 394 | long locals; |
| 395 | unsigned char op; |
| 396 | CORE_ADDR dummy_bottom; |
| 397 | CORE_ADDR adr; |
| 398 | int i; |
| 399 | |
| 400 | memset (fsrp, 0, sizeof *fsrp); |
| 401 | |
| 402 | /* if frame is the end of a dummy, compute where the |
| 403 | * beginning would be |
| 404 | */ |
| 405 | dummy_bottom = fip->frame - 4 - REGISTER_BYTES - CALL_DUMMY_LENGTH; |
| 406 | |
| 407 | /* check if the PC is in the stack, in a dummy frame */ |
| 408 | if (dummy_bottom <= fip->pc && fip->pc <= fip->frame) |
| 409 | { |
| 410 | /* all regs were saved by push_call_dummy () */ |
| 411 | adr = fip->frame; |
| 412 | for (i = 0; i < NUM_REGS; i++) |
| 413 | { |
| 414 | adr -= REGISTER_RAW_SIZE (i); |
| 415 | fsrp->regs[i] = adr; |
| 416 | } |
| 417 | return; |
| 418 | } |
| 419 | |
| 420 | locals = i386_get_frame_setup (get_pc_function_start (fip->pc)); |
| 421 | |
| 422 | if (locals >= 0) |
| 423 | { |
| 424 | adr = fip->frame - 4 - locals; |
| 425 | for (i = 0; i < 8; i++) |
| 426 | { |
| 427 | op = codestream_get (); |
| 428 | if (op < 0x50 || op > 0x57) |
| 429 | break; |
| 430 | #ifdef I386_REGNO_TO_SYMMETRY |
| 431 | /* Dynix uses different internal numbering. Ick. */ |
| 432 | fsrp->regs[I386_REGNO_TO_SYMMETRY(op - 0x50)] = adr; |
| 433 | #else |
| 434 | fsrp->regs[op - 0x50] = adr; |
| 435 | #endif |
| 436 | adr -= 4; |
| 437 | } |
| 438 | } |
| 439 | |
| 440 | fsrp->regs[PC_REGNUM] = fip->frame + 4; |
| 441 | fsrp->regs[FP_REGNUM] = fip->frame; |
| 442 | } |
| 443 | |
| 444 | /* return pc of first real instruction */ |
| 445 | |
| 446 | int |
| 447 | i386_skip_prologue (pc) |
| 448 | int pc; |
| 449 | { |
| 450 | unsigned char op; |
| 451 | int i; |
| 452 | static unsigned char pic_pat[6] = { 0xe8, 0, 0, 0, 0, /* call 0x0 */ |
| 453 | 0x5b, /* popl %ebx */ |
| 454 | }; |
| 455 | CORE_ADDR pos; |
| 456 | |
| 457 | if (i386_get_frame_setup (pc) < 0) |
| 458 | return (pc); |
| 459 | |
| 460 | /* found valid frame setup - codestream now points to |
| 461 | * start of push instructions for saving registers |
| 462 | */ |
| 463 | |
| 464 | /* skip over register saves */ |
| 465 | for (i = 0; i < 8; i++) |
| 466 | { |
| 467 | op = codestream_peek (); |
| 468 | /* break if not pushl inst */ |
| 469 | if (op < 0x50 || op > 0x57) |
| 470 | break; |
| 471 | codestream_get (); |
| 472 | } |
| 473 | |
| 474 | /* The native cc on SVR4 in -K PIC mode inserts the following code to get |
| 475 | the address of the global offset table (GOT) into register %ebx. |
| 476 | call 0x0 |
| 477 | popl %ebx |
| 478 | movl %ebx,x(%ebp) (optional) |
| 479 | addl y,%ebx |
| 480 | This code is with the rest of the prologue (at the end of the |
| 481 | function), so we have to skip it to get to the first real |
| 482 | instruction at the start of the function. */ |
| 483 | |
| 484 | pos = codestream_tell (); |
| 485 | for (i = 0; i < 6; i++) |
| 486 | { |
| 487 | op = codestream_get (); |
| 488 | if (pic_pat [i] != op) |
| 489 | break; |
| 490 | } |
| 491 | if (i == 6) |
| 492 | { |
| 493 | unsigned char buf[4]; |
| 494 | long delta = 6; |
| 495 | |
| 496 | op = codestream_get (); |
| 497 | if (op == 0x89) /* movl %ebx, x(%ebp) */ |
| 498 | { |
| 499 | op = codestream_get (); |
| 500 | if (op == 0x5d) /* one byte offset from %ebp */ |
| 501 | { |
| 502 | delta += 3; |
| 503 | codestream_read (buf, 1); |
| 504 | } |
| 505 | else if (op == 0x9d) /* four byte offset from %ebp */ |
| 506 | { |
| 507 | delta += 6; |
| 508 | codestream_read (buf, 4); |
| 509 | } |
| 510 | else /* unexpected instruction */ |
| 511 | delta = -1; |
| 512 | op = codestream_get (); |
| 513 | } |
| 514 | /* addl y,%ebx */ |
| 515 | if (delta > 0 && op == 0x81 && codestream_get () == 0xc3) |
| 516 | { |
| 517 | pos += delta + 6; |
| 518 | } |
| 519 | } |
| 520 | codestream_seek (pos); |
| 521 | |
| 522 | i386_follow_jump (); |
| 523 | |
| 524 | return (codestream_tell ()); |
| 525 | } |
| 526 | |
| 527 | void |
| 528 | i386_push_dummy_frame () |
| 529 | { |
| 530 | CORE_ADDR sp = read_register (SP_REGNUM); |
| 531 | int regnum; |
| 532 | char regbuf[MAX_REGISTER_RAW_SIZE]; |
| 533 | |
| 534 | sp = push_word (sp, read_register (PC_REGNUM)); |
| 535 | sp = push_word (sp, read_register (FP_REGNUM)); |
| 536 | write_register (FP_REGNUM, sp); |
| 537 | for (regnum = 0; regnum < NUM_REGS; regnum++) |
| 538 | { |
| 539 | read_register_gen (regnum, regbuf); |
| 540 | sp = push_bytes (sp, regbuf, REGISTER_RAW_SIZE (regnum)); |
| 541 | } |
| 542 | write_register (SP_REGNUM, sp); |
| 543 | } |
| 544 | |
| 545 | void |
| 546 | i386_pop_frame () |
| 547 | { |
| 548 | struct frame_info *frame = get_current_frame (); |
| 549 | CORE_ADDR fp; |
| 550 | int regnum; |
| 551 | struct frame_saved_regs fsr; |
| 552 | char regbuf[MAX_REGISTER_RAW_SIZE]; |
| 553 | |
| 554 | fp = FRAME_FP (frame); |
| 555 | get_frame_saved_regs (frame, &fsr); |
| 556 | for (regnum = 0; regnum < NUM_REGS; regnum++) |
| 557 | { |
| 558 | CORE_ADDR adr; |
| 559 | adr = fsr.regs[regnum]; |
| 560 | if (adr) |
| 561 | { |
| 562 | read_memory (adr, regbuf, REGISTER_RAW_SIZE (regnum)); |
| 563 | write_register_bytes (REGISTER_BYTE (regnum), regbuf, |
| 564 | REGISTER_RAW_SIZE (regnum)); |
| 565 | } |
| 566 | } |
| 567 | write_register (FP_REGNUM, read_memory_integer (fp, 4)); |
| 568 | write_register (PC_REGNUM, read_memory_integer (fp + 4, 4)); |
| 569 | write_register (SP_REGNUM, fp + 8); |
| 570 | flush_cached_frames (); |
| 571 | } |
| 572 | |
| 573 | #ifdef GET_LONGJMP_TARGET |
| 574 | |
| 575 | /* Figure out where the longjmp will land. Slurp the args out of the stack. |
| 576 | We expect the first arg to be a pointer to the jmp_buf structure from which |
| 577 | we extract the pc (JB_PC) that we will land at. The pc is copied into PC. |
| 578 | This routine returns true on success. */ |
| 579 | |
| 580 | int |
| 581 | get_longjmp_target(pc) |
| 582 | CORE_ADDR *pc; |
| 583 | { |
| 584 | char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT]; |
| 585 | CORE_ADDR sp, jb_addr; |
| 586 | |
| 587 | sp = read_register (SP_REGNUM); |
| 588 | |
| 589 | if (target_read_memory (sp + SP_ARG0, /* Offset of first arg on stack */ |
| 590 | buf, |
| 591 | TARGET_PTR_BIT / TARGET_CHAR_BIT)) |
| 592 | return 0; |
| 593 | |
| 594 | jb_addr = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT); |
| 595 | |
| 596 | if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf, |
| 597 | TARGET_PTR_BIT / TARGET_CHAR_BIT)) |
| 598 | return 0; |
| 599 | |
| 600 | *pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT); |
| 601 | |
| 602 | return 1; |
| 603 | } |
| 604 | |
| 605 | #endif /* GET_LONGJMP_TARGET */ |
| 606 | |
| 607 | void |
| 608 | i386_extract_return_value(type, regbuf, valbuf) |
| 609 | struct type *type; |
| 610 | char regbuf[REGISTER_BYTES]; |
| 611 | char *valbuf; |
| 612 | { |
| 613 | /* On AIX, floating point values are returned in floating point registers. */ |
| 614 | #ifdef I386_AIX_TARGET |
| 615 | if (TYPE_CODE_FLT == TYPE_CODE(type)) |
| 616 | { |
| 617 | double d; |
| 618 | /* 387 %st(0), gcc uses this */ |
| 619 | floatformat_to_double (&floatformat_i387_ext, |
| 620 | ®buf[REGISTER_BYTE(FP0_REGNUM)], |
| 621 | &d); |
| 622 | store_floating (valbuf, TYPE_LENGTH (type), d); |
| 623 | } |
| 624 | else |
| 625 | #endif /* I386_AIX_TARGET */ |
| 626 | { |
| 627 | memcpy (valbuf, regbuf, TYPE_LENGTH (type)); |
| 628 | } |
| 629 | } |
| 630 | |
| 631 | #ifdef I386V4_SIGTRAMP_SAVED_PC |
| 632 | /* Get saved user PC for sigtramp from the pushed ucontext on the stack |
| 633 | for all three variants of SVR4 sigtramps. */ |
| 634 | |
| 635 | CORE_ADDR |
| 636 | i386v4_sigtramp_saved_pc (frame) |
| 637 | struct frame_info *frame; |
| 638 | { |
| 639 | CORE_ADDR saved_pc_offset = 4; |
| 640 | char *name = NULL; |
| 641 | |
| 642 | find_pc_partial_function (frame->pc, &name, NULL, NULL); |
| 643 | if (name) |
| 644 | { |
| 645 | if (STREQ (name, "_sigreturn")) |
| 646 | saved_pc_offset = 132 + 14 * 4; |
| 647 | else if (STREQ (name, "_sigacthandler")) |
| 648 | saved_pc_offset = 80 + 14 * 4; |
| 649 | else if (STREQ (name, "sigvechandler")) |
| 650 | saved_pc_offset = 120 + 14 * 4; |
| 651 | } |
| 652 | |
| 653 | if (frame->next) |
| 654 | return read_memory_integer (frame->next->frame + saved_pc_offset, 4); |
| 655 | return read_memory_integer (read_register (SP_REGNUM) + saved_pc_offset, 4); |
| 656 | } |
| 657 | #endif /* I386V4_SIGTRAMP_SAVED_PC */ |
| 658 | |
| 659 | |
| 660 | |
| 661 | /* Stuff for WIN32 PE style DLL's but is pretty generic really. */ |
| 662 | |
| 663 | CORE_ADDR |
| 664 | skip_trampoline_code (pc, name) |
| 665 | CORE_ADDR pc; |
| 666 | char *name; |
| 667 | { |
| 668 | if (pc && read_memory_unsigned_integer (pc, 2) == 0x25ff) /* jmp *(dest) */ |
| 669 | { |
| 670 | unsigned long indirect = read_memory_unsigned_integer (pc+2, 4); |
| 671 | struct minimal_symbol *indsym = |
| 672 | indirect ? lookup_minimal_symbol_by_pc (indirect) : 0; |
| 673 | char *symname = indsym ? SYMBOL_NAME(indsym) : 0; |
| 674 | |
| 675 | if (symname) |
| 676 | { |
| 677 | if (strncmp (symname,"__imp_", 6) == 0 |
| 678 | || strncmp (symname,"_imp_", 5) == 0) |
| 679 | return name ? 1 : read_memory_unsigned_integer (indirect, 4); |
| 680 | } |
| 681 | } |
| 682 | return 0; /* not a trampoline */ |
| 683 | } |
| 684 | |
| 685 | static char *x86_assembly_types[] = {"i386", "i8086", NULL}; |
| 686 | static char *x86_assembly_result = "i386"; |
| 687 | |
| 688 | static void |
| 689 | set_assembly_language_command (ignore, from_tty, c) |
| 690 | char *ignore; |
| 691 | int from_tty; |
| 692 | struct cmd_list_element *c; |
| 693 | { |
| 694 | if (strcmp (x86_assembly_result, "i386") == 0) |
| 695 | tm_print_insn = print_insn_i386; |
| 696 | else |
| 697 | tm_print_insn = print_insn_i8086; |
| 698 | } |
| 699 | |
| 700 | void |
| 701 | _initialize_i386_tdep () |
| 702 | { |
| 703 | struct cmd_list_element *cmd; |
| 704 | |
| 705 | tm_print_insn = print_insn_i386; |
| 706 | |
| 707 | cmd = add_set_enum_cmd ("assembly-language", class_obscure, |
| 708 | x86_assembly_types, (char *)&x86_assembly_result, |
| 709 | "Set x86 instruction set to use for disassembly.\n\ |
| 710 | This value can be set to either i386 or i8086 to change how instructions are disassembled.", |
| 711 | &setlist); |
| 712 | add_show_from_set (cmd, &showlist); |
| 713 | |
| 714 | cmd->function.sfunc = set_assembly_language_command; |
| 715 | } |