| 1 | /* Low level interface to ptrace, for GDB when running under Unix. |
| 2 | Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, |
| 3 | 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 |
| 4 | Free Software Foundation, Inc. |
| 5 | |
| 6 | This file is part of GDB. |
| 7 | |
| 8 | This program is free software; you can redistribute it and/or modify |
| 9 | it under the terms of the GNU General Public License as published by |
| 10 | the Free Software Foundation; either version 2 of the License, or |
| 11 | (at your option) any later version. |
| 12 | |
| 13 | This program is distributed in the hope that it will be useful, |
| 14 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | GNU General Public License for more details. |
| 17 | |
| 18 | You should have received a copy of the GNU General Public License |
| 19 | along with this program; if not, write to the Free Software |
| 20 | Foundation, Inc., 51 Franklin Street, Fifth Floor, |
| 21 | Boston, MA 02110-1301, USA. */ |
| 22 | |
| 23 | #include "defs.h" |
| 24 | #include "frame.h" |
| 25 | #include "inferior.h" |
| 26 | #include "command.h" |
| 27 | #include "serial.h" |
| 28 | #include "terminal.h" |
| 29 | #include "target.h" |
| 30 | #include "gdbthread.h" |
| 31 | |
| 32 | #include "gdb_string.h" |
| 33 | #include <signal.h> |
| 34 | #include <fcntl.h> |
| 35 | #include "gdb_select.h" |
| 36 | |
| 37 | #include "inflow.h" |
| 38 | |
| 39 | #ifdef HAVE_SYS_IOCTL_H |
| 40 | #include <sys/ioctl.h> |
| 41 | #endif |
| 42 | |
| 43 | #ifndef O_NOCTTY |
| 44 | #define O_NOCTTY 0 |
| 45 | #endif |
| 46 | |
| 47 | #if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN) |
| 48 | static void handle_sigio (int); |
| 49 | #endif |
| 50 | |
| 51 | extern void _initialize_inflow (void); |
| 52 | |
| 53 | static void pass_signal (int); |
| 54 | |
| 55 | static void kill_command (char *, int); |
| 56 | |
| 57 | static void terminal_ours_1 (int); |
| 58 | \f |
| 59 | /* Record terminal status separately for debugger and inferior. */ |
| 60 | |
| 61 | static struct serial *stdin_serial; |
| 62 | |
| 63 | /* TTY state for the inferior. We save it whenever the inferior stops, and |
| 64 | restore it when it resumes. */ |
| 65 | static serial_ttystate inferior_ttystate; |
| 66 | |
| 67 | /* Our own tty state, which we restore every time we need to deal with the |
| 68 | terminal. We only set it once, when GDB first starts. The settings of |
| 69 | flags which readline saves and restores and unimportant. */ |
| 70 | static serial_ttystate our_ttystate; |
| 71 | |
| 72 | /* fcntl flags for us and the inferior. Saved and restored just like |
| 73 | {our,inferior}_ttystate. */ |
| 74 | static int tflags_inferior; |
| 75 | static int tflags_ours; |
| 76 | |
| 77 | #ifdef PROCESS_GROUP_TYPE |
| 78 | /* Process group for us and the inferior. Saved and restored just like |
| 79 | {our,inferior}_ttystate. */ |
| 80 | PROCESS_GROUP_TYPE our_process_group; |
| 81 | PROCESS_GROUP_TYPE inferior_process_group; |
| 82 | #endif |
| 83 | |
| 84 | /* While the inferior is running, we want SIGINT and SIGQUIT to go to the |
| 85 | inferior only. If we have job control, that takes care of it. If not, |
| 86 | we save our handlers in these two variables and set SIGINT and SIGQUIT |
| 87 | to SIG_IGN. */ |
| 88 | |
| 89 | static void (*sigint_ours) (); |
| 90 | static void (*sigquit_ours) (); |
| 91 | |
| 92 | /* The name of the tty (from the `tty' command) that we gave to the inferior |
| 93 | when it was last started. */ |
| 94 | |
| 95 | static const char *inferior_thisrun_terminal; |
| 96 | |
| 97 | /* Nonzero if our terminal settings are in effect. Zero if the |
| 98 | inferior's settings are in effect. Ignored if !gdb_has_a_terminal |
| 99 | (). */ |
| 100 | |
| 101 | int terminal_is_ours; |
| 102 | |
| 103 | enum |
| 104 | { |
| 105 | yes, no, have_not_checked |
| 106 | } |
| 107 | gdb_has_a_terminal_flag = have_not_checked; |
| 108 | |
| 109 | /* Does GDB have a terminal (on stdin)? */ |
| 110 | int |
| 111 | gdb_has_a_terminal (void) |
| 112 | { |
| 113 | switch (gdb_has_a_terminal_flag) |
| 114 | { |
| 115 | case yes: |
| 116 | return 1; |
| 117 | case no: |
| 118 | return 0; |
| 119 | case have_not_checked: |
| 120 | /* Get all the current tty settings (including whether we have a |
| 121 | tty at all!). Can't do this in _initialize_inflow because |
| 122 | serial_fdopen() won't work until the serial_ops_list is |
| 123 | initialized. */ |
| 124 | |
| 125 | #ifdef F_GETFL |
| 126 | tflags_ours = fcntl (0, F_GETFL, 0); |
| 127 | #endif |
| 128 | |
| 129 | gdb_has_a_terminal_flag = no; |
| 130 | if (stdin_serial != NULL) |
| 131 | { |
| 132 | our_ttystate = serial_get_tty_state (stdin_serial); |
| 133 | |
| 134 | if (our_ttystate != NULL) |
| 135 | { |
| 136 | gdb_has_a_terminal_flag = yes; |
| 137 | #ifdef HAVE_TERMIOS |
| 138 | our_process_group = tcgetpgrp (0); |
| 139 | #endif |
| 140 | #ifdef HAVE_TERMIO |
| 141 | our_process_group = getpgrp (); |
| 142 | #endif |
| 143 | #ifdef HAVE_SGTTY |
| 144 | ioctl (0, TIOCGPGRP, &our_process_group); |
| 145 | #endif |
| 146 | } |
| 147 | } |
| 148 | |
| 149 | return gdb_has_a_terminal_flag == yes; |
| 150 | default: |
| 151 | /* "Can't happen". */ |
| 152 | return 0; |
| 153 | } |
| 154 | } |
| 155 | |
| 156 | /* Macro for printing errors from ioctl operations */ |
| 157 | |
| 158 | #define OOPSY(what) \ |
| 159 | if (result == -1) \ |
| 160 | fprintf_unfiltered(gdb_stderr, "[%s failed in terminal_inferior: %s]\n", \ |
| 161 | what, safe_strerror (errno)) |
| 162 | |
| 163 | static void terminal_ours_1 (int); |
| 164 | |
| 165 | /* Initialize the terminal settings we record for the inferior, |
| 166 | before we actually run the inferior. */ |
| 167 | |
| 168 | void |
| 169 | terminal_init_inferior_with_pgrp (int pgrp) |
| 170 | { |
| 171 | if (gdb_has_a_terminal ()) |
| 172 | { |
| 173 | /* We could just as well copy our_ttystate (if we felt like |
| 174 | adding a new function serial_copy_tty_state()). */ |
| 175 | if (inferior_ttystate) |
| 176 | xfree (inferior_ttystate); |
| 177 | inferior_ttystate = serial_get_tty_state (stdin_serial); |
| 178 | |
| 179 | #ifdef PROCESS_GROUP_TYPE |
| 180 | inferior_process_group = pgrp; |
| 181 | #endif |
| 182 | |
| 183 | /* Make sure that next time we call terminal_inferior (which will be |
| 184 | before the program runs, as it needs to be), we install the new |
| 185 | process group. */ |
| 186 | terminal_is_ours = 1; |
| 187 | } |
| 188 | } |
| 189 | |
| 190 | /* Save the terminal settings again. This is necessary for the TUI |
| 191 | when it switches to TUI or non-TUI mode; curses changes the terminal |
| 192 | and gdb must be able to restore it correctly. */ |
| 193 | |
| 194 | void |
| 195 | terminal_save_ours (void) |
| 196 | { |
| 197 | if (gdb_has_a_terminal ()) |
| 198 | { |
| 199 | /* We could just as well copy our_ttystate (if we felt like adding |
| 200 | a new function serial_copy_tty_state). */ |
| 201 | if (our_ttystate) |
| 202 | xfree (our_ttystate); |
| 203 | our_ttystate = serial_get_tty_state (stdin_serial); |
| 204 | } |
| 205 | } |
| 206 | |
| 207 | void |
| 208 | terminal_init_inferior (void) |
| 209 | { |
| 210 | #ifdef PROCESS_GROUP_TYPE |
| 211 | /* This is for Lynx, and should be cleaned up by having Lynx be a separate |
| 212 | debugging target with a version of target_terminal_init_inferior which |
| 213 | passes in the process group to a generic routine which does all the work |
| 214 | (and the non-threaded child_terminal_init_inferior can just pass in |
| 215 | inferior_ptid to the same routine). */ |
| 216 | /* We assume INFERIOR_PID is also the child's process group. */ |
| 217 | terminal_init_inferior_with_pgrp (PIDGET (inferior_ptid)); |
| 218 | #endif /* PROCESS_GROUP_TYPE */ |
| 219 | } |
| 220 | |
| 221 | /* Put the inferior's terminal settings into effect. |
| 222 | This is preparation for starting or resuming the inferior. */ |
| 223 | |
| 224 | void |
| 225 | terminal_inferior (void) |
| 226 | { |
| 227 | if (gdb_has_a_terminal () && terminal_is_ours |
| 228 | && inferior_ttystate != NULL |
| 229 | && inferior_thisrun_terminal == 0) |
| 230 | { |
| 231 | int result; |
| 232 | |
| 233 | #ifdef F_GETFL |
| 234 | /* Is there a reason this is being done twice? It happens both |
| 235 | places we use F_SETFL, so I'm inclined to think perhaps there |
| 236 | is some reason, however perverse. Perhaps not though... */ |
| 237 | result = fcntl (0, F_SETFL, tflags_inferior); |
| 238 | result = fcntl (0, F_SETFL, tflags_inferior); |
| 239 | OOPSY ("fcntl F_SETFL"); |
| 240 | #endif |
| 241 | |
| 242 | /* Because we were careful to not change in or out of raw mode in |
| 243 | terminal_ours, we will not change in our out of raw mode with |
| 244 | this call, so we don't flush any input. */ |
| 245 | result = serial_set_tty_state (stdin_serial, inferior_ttystate); |
| 246 | OOPSY ("setting tty state"); |
| 247 | |
| 248 | if (!job_control) |
| 249 | { |
| 250 | sigint_ours = (void (*)()) signal (SIGINT, SIG_IGN); |
| 251 | #ifdef SIGQUIT |
| 252 | sigquit_ours = (void (*)()) signal (SIGQUIT, SIG_IGN); |
| 253 | #endif |
| 254 | } |
| 255 | |
| 256 | /* If attach_flag is set, we don't know whether we are sharing a |
| 257 | terminal with the inferior or not. (attaching a process |
| 258 | without a terminal is one case where we do not; attaching a |
| 259 | process which we ran from the same shell as GDB via `&' is |
| 260 | one case where we do, I think (but perhaps this is not |
| 261 | `sharing' in the sense that we need to save and restore tty |
| 262 | state)). I don't know if there is any way to tell whether we |
| 263 | are sharing a terminal. So what we do is to go through all |
| 264 | the saving and restoring of the tty state, but ignore errors |
| 265 | setting the process group, which will happen if we are not |
| 266 | sharing a terminal). */ |
| 267 | |
| 268 | if (job_control) |
| 269 | { |
| 270 | #ifdef HAVE_TERMIOS |
| 271 | result = tcsetpgrp (0, inferior_process_group); |
| 272 | if (!attach_flag) |
| 273 | OOPSY ("tcsetpgrp"); |
| 274 | #endif |
| 275 | |
| 276 | #ifdef HAVE_SGTTY |
| 277 | result = ioctl (0, TIOCSPGRP, &inferior_process_group); |
| 278 | if (!attach_flag) |
| 279 | OOPSY ("TIOCSPGRP"); |
| 280 | #endif |
| 281 | } |
| 282 | |
| 283 | } |
| 284 | terminal_is_ours = 0; |
| 285 | } |
| 286 | |
| 287 | /* Put some of our terminal settings into effect, |
| 288 | enough to get proper results from our output, |
| 289 | but do not change into or out of RAW mode |
| 290 | so that no input is discarded. |
| 291 | |
| 292 | After doing this, either terminal_ours or terminal_inferior |
| 293 | should be called to get back to a normal state of affairs. */ |
| 294 | |
| 295 | void |
| 296 | terminal_ours_for_output (void) |
| 297 | { |
| 298 | terminal_ours_1 (1); |
| 299 | } |
| 300 | |
| 301 | /* Put our terminal settings into effect. |
| 302 | First record the inferior's terminal settings |
| 303 | so they can be restored properly later. */ |
| 304 | |
| 305 | void |
| 306 | terminal_ours (void) |
| 307 | { |
| 308 | terminal_ours_1 (0); |
| 309 | } |
| 310 | |
| 311 | /* output_only is not used, and should not be used unless we introduce |
| 312 | separate terminal_is_ours and terminal_is_ours_for_output |
| 313 | flags. */ |
| 314 | |
| 315 | static void |
| 316 | terminal_ours_1 (int output_only) |
| 317 | { |
| 318 | /* Checking inferior_thisrun_terminal is necessary so that |
| 319 | if GDB is running in the background, it won't block trying |
| 320 | to do the ioctl()'s below. Checking gdb_has_a_terminal |
| 321 | avoids attempting all the ioctl's when running in batch. */ |
| 322 | if (inferior_thisrun_terminal != 0 || gdb_has_a_terminal () == 0) |
| 323 | return; |
| 324 | |
| 325 | if (!terminal_is_ours) |
| 326 | { |
| 327 | #ifdef SIGTTOU |
| 328 | /* Ignore this signal since it will happen when we try to set the |
| 329 | pgrp. */ |
| 330 | void (*osigttou) () = NULL; |
| 331 | #endif |
| 332 | int result; |
| 333 | |
| 334 | terminal_is_ours = 1; |
| 335 | |
| 336 | #ifdef SIGTTOU |
| 337 | if (job_control) |
| 338 | osigttou = (void (*)()) signal (SIGTTOU, SIG_IGN); |
| 339 | #endif |
| 340 | |
| 341 | if (inferior_ttystate) |
| 342 | xfree (inferior_ttystate); |
| 343 | inferior_ttystate = serial_get_tty_state (stdin_serial); |
| 344 | #ifdef HAVE_TERMIOS |
| 345 | inferior_process_group = tcgetpgrp (0); |
| 346 | #endif |
| 347 | #ifdef HAVE_TERMIO |
| 348 | inferior_process_group = getpgrp (); |
| 349 | #endif |
| 350 | #ifdef HAVE_SGTTY |
| 351 | ioctl (0, TIOCGPGRP, &inferior_process_group); |
| 352 | #endif |
| 353 | |
| 354 | /* Here we used to set ICANON in our ttystate, but I believe this |
| 355 | was an artifact from before when we used readline. Readline sets |
| 356 | the tty state when it needs to. |
| 357 | FIXME-maybe: However, query() expects non-raw mode and doesn't |
| 358 | use readline. Maybe query should use readline (on the other hand, |
| 359 | this only matters for HAVE_SGTTY, not termio or termios, I think). */ |
| 360 | |
| 361 | /* Set tty state to our_ttystate. We don't change in our out of raw |
| 362 | mode, to avoid flushing input. We need to do the same thing |
| 363 | regardless of output_only, because we don't have separate |
| 364 | terminal_is_ours and terminal_is_ours_for_output flags. It's OK, |
| 365 | though, since readline will deal with raw mode when/if it needs to. |
| 366 | */ |
| 367 | |
| 368 | serial_noflush_set_tty_state (stdin_serial, our_ttystate, |
| 369 | inferior_ttystate); |
| 370 | |
| 371 | if (job_control) |
| 372 | { |
| 373 | #ifdef HAVE_TERMIOS |
| 374 | result = tcsetpgrp (0, our_process_group); |
| 375 | #if 0 |
| 376 | /* This fails on Ultrix with EINVAL if you run the testsuite |
| 377 | in the background with nohup, and then log out. GDB never |
| 378 | used to check for an error here, so perhaps there are other |
| 379 | such situations as well. */ |
| 380 | if (result == -1) |
| 381 | fprintf_unfiltered (gdb_stderr, "[tcsetpgrp failed in terminal_ours: %s]\n", |
| 382 | safe_strerror (errno)); |
| 383 | #endif |
| 384 | #endif /* termios */ |
| 385 | |
| 386 | #ifdef HAVE_SGTTY |
| 387 | result = ioctl (0, TIOCSPGRP, &our_process_group); |
| 388 | #endif |
| 389 | } |
| 390 | |
| 391 | #ifdef SIGTTOU |
| 392 | if (job_control) |
| 393 | signal (SIGTTOU, osigttou); |
| 394 | #endif |
| 395 | |
| 396 | if (!job_control) |
| 397 | { |
| 398 | signal (SIGINT, sigint_ours); |
| 399 | #ifdef SIGQUIT |
| 400 | signal (SIGQUIT, sigquit_ours); |
| 401 | #endif |
| 402 | } |
| 403 | |
| 404 | #ifdef F_GETFL |
| 405 | tflags_inferior = fcntl (0, F_GETFL, 0); |
| 406 | |
| 407 | /* Is there a reason this is being done twice? It happens both |
| 408 | places we use F_SETFL, so I'm inclined to think perhaps there |
| 409 | is some reason, however perverse. Perhaps not though... */ |
| 410 | result = fcntl (0, F_SETFL, tflags_ours); |
| 411 | result = fcntl (0, F_SETFL, tflags_ours); |
| 412 | #endif |
| 413 | |
| 414 | result = result; /* lint */ |
| 415 | } |
| 416 | } |
| 417 | |
| 418 | void |
| 419 | term_info (char *arg, int from_tty) |
| 420 | { |
| 421 | target_terminal_info (arg, from_tty); |
| 422 | } |
| 423 | |
| 424 | void |
| 425 | child_terminal_info (char *args, int from_tty) |
| 426 | { |
| 427 | if (!gdb_has_a_terminal ()) |
| 428 | { |
| 429 | printf_filtered (_("This GDB does not control a terminal.\n")); |
| 430 | return; |
| 431 | } |
| 432 | |
| 433 | printf_filtered (_("Inferior's terminal status (currently saved by GDB):\n")); |
| 434 | |
| 435 | /* First the fcntl flags. */ |
| 436 | { |
| 437 | int flags; |
| 438 | |
| 439 | flags = tflags_inferior; |
| 440 | |
| 441 | printf_filtered ("File descriptor flags = "); |
| 442 | |
| 443 | #ifndef O_ACCMODE |
| 444 | #define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR) |
| 445 | #endif |
| 446 | /* (O_ACCMODE) parens are to avoid Ultrix header file bug */ |
| 447 | switch (flags & (O_ACCMODE)) |
| 448 | { |
| 449 | case O_RDONLY: |
| 450 | printf_filtered ("O_RDONLY"); |
| 451 | break; |
| 452 | case O_WRONLY: |
| 453 | printf_filtered ("O_WRONLY"); |
| 454 | break; |
| 455 | case O_RDWR: |
| 456 | printf_filtered ("O_RDWR"); |
| 457 | break; |
| 458 | } |
| 459 | flags &= ~(O_ACCMODE); |
| 460 | |
| 461 | #ifdef O_NONBLOCK |
| 462 | if (flags & O_NONBLOCK) |
| 463 | printf_filtered (" | O_NONBLOCK"); |
| 464 | flags &= ~O_NONBLOCK; |
| 465 | #endif |
| 466 | |
| 467 | #if defined (O_NDELAY) |
| 468 | /* If O_NDELAY and O_NONBLOCK are defined to the same thing, we will |
| 469 | print it as O_NONBLOCK, which is good cause that is what POSIX |
| 470 | has, and the flag will already be cleared by the time we get here. */ |
| 471 | if (flags & O_NDELAY) |
| 472 | printf_filtered (" | O_NDELAY"); |
| 473 | flags &= ~O_NDELAY; |
| 474 | #endif |
| 475 | |
| 476 | if (flags & O_APPEND) |
| 477 | printf_filtered (" | O_APPEND"); |
| 478 | flags &= ~O_APPEND; |
| 479 | |
| 480 | #if defined (O_BINARY) |
| 481 | if (flags & O_BINARY) |
| 482 | printf_filtered (" | O_BINARY"); |
| 483 | flags &= ~O_BINARY; |
| 484 | #endif |
| 485 | |
| 486 | if (flags) |
| 487 | printf_filtered (" | 0x%x", flags); |
| 488 | printf_filtered ("\n"); |
| 489 | } |
| 490 | |
| 491 | #ifdef PROCESS_GROUP_TYPE |
| 492 | printf_filtered ("Process group = %d\n", |
| 493 | (int) inferior_process_group); |
| 494 | #endif |
| 495 | |
| 496 | serial_print_tty_state (stdin_serial, inferior_ttystate, gdb_stdout); |
| 497 | } |
| 498 | \f |
| 499 | /* NEW_TTY_PREFORK is called before forking a new child process, |
| 500 | so we can record the state of ttys in the child to be formed. |
| 501 | TTYNAME is null if we are to share the terminal with gdb; |
| 502 | or points to a string containing the name of the desired tty. |
| 503 | |
| 504 | NEW_TTY is called in new child processes under Unix, which will |
| 505 | become debugger target processes. This actually switches to |
| 506 | the terminal specified in the NEW_TTY_PREFORK call. */ |
| 507 | |
| 508 | void |
| 509 | new_tty_prefork (const char *ttyname) |
| 510 | { |
| 511 | /* Save the name for later, for determining whether we and the child |
| 512 | are sharing a tty. */ |
| 513 | inferior_thisrun_terminal = ttyname; |
| 514 | } |
| 515 | |
| 516 | void |
| 517 | new_tty (void) |
| 518 | { |
| 519 | int tty; |
| 520 | |
| 521 | if (inferior_thisrun_terminal == 0) |
| 522 | return; |
| 523 | #if !defined(__GO32__) && !defined(_WIN32) |
| 524 | #ifdef TIOCNOTTY |
| 525 | /* Disconnect the child process from our controlling terminal. On some |
| 526 | systems (SVR4 for example), this may cause a SIGTTOU, so temporarily |
| 527 | ignore SIGTTOU. */ |
| 528 | tty = open ("/dev/tty", O_RDWR); |
| 529 | if (tty > 0) |
| 530 | { |
| 531 | void (*osigttou) (); |
| 532 | |
| 533 | osigttou = (void (*)()) signal (SIGTTOU, SIG_IGN); |
| 534 | ioctl (tty, TIOCNOTTY, 0); |
| 535 | close (tty); |
| 536 | signal (SIGTTOU, osigttou); |
| 537 | } |
| 538 | #endif |
| 539 | |
| 540 | /* Now open the specified new terminal. */ |
| 541 | tty = open (inferior_thisrun_terminal, O_RDWR | O_NOCTTY); |
| 542 | if (tty == -1) |
| 543 | { |
| 544 | print_sys_errmsg (inferior_thisrun_terminal, errno); |
| 545 | _exit (1); |
| 546 | } |
| 547 | |
| 548 | /* Avoid use of dup2; doesn't exist on all systems. */ |
| 549 | if (tty != 0) |
| 550 | { |
| 551 | close (0); |
| 552 | dup (tty); |
| 553 | } |
| 554 | if (tty != 1) |
| 555 | { |
| 556 | close (1); |
| 557 | dup (tty); |
| 558 | } |
| 559 | if (tty != 2) |
| 560 | { |
| 561 | close (2); |
| 562 | dup (tty); |
| 563 | } |
| 564 | if (tty > 2) |
| 565 | close (tty); |
| 566 | #endif /* !go32 && !win32 */ |
| 567 | } |
| 568 | \f |
| 569 | /* Kill the inferior process. Make us have no inferior. */ |
| 570 | |
| 571 | static void |
| 572 | kill_command (char *arg, int from_tty) |
| 573 | { |
| 574 | /* FIXME: This should not really be inferior_ptid (or target_has_execution). |
| 575 | It should be a distinct flag that indicates that a target is active, cuz |
| 576 | some targets don't have processes! */ |
| 577 | |
| 578 | if (ptid_equal (inferior_ptid, null_ptid)) |
| 579 | error (_("The program is not being run.")); |
| 580 | if (!query ("Kill the program being debugged? ")) |
| 581 | error (_("Not confirmed.")); |
| 582 | target_kill (); |
| 583 | |
| 584 | init_thread_list (); /* Destroy thread info */ |
| 585 | |
| 586 | /* Killing off the inferior can leave us with a core file. If so, |
| 587 | print the state we are left in. */ |
| 588 | if (target_has_stack) |
| 589 | { |
| 590 | printf_filtered (_("In %s,\n"), target_longname); |
| 591 | print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC); |
| 592 | } |
| 593 | bfd_cache_close_all (); |
| 594 | } |
| 595 | \f |
| 596 | /* Call set_sigint_trap when you need to pass a signal on to an attached |
| 597 | process when handling SIGINT */ |
| 598 | |
| 599 | static void |
| 600 | pass_signal (int signo) |
| 601 | { |
| 602 | #ifndef _WIN32 |
| 603 | kill (PIDGET (inferior_ptid), SIGINT); |
| 604 | #endif |
| 605 | } |
| 606 | |
| 607 | static void (*osig) (); |
| 608 | |
| 609 | void |
| 610 | set_sigint_trap (void) |
| 611 | { |
| 612 | if (attach_flag || inferior_thisrun_terminal) |
| 613 | { |
| 614 | osig = (void (*)()) signal (SIGINT, pass_signal); |
| 615 | } |
| 616 | } |
| 617 | |
| 618 | void |
| 619 | clear_sigint_trap (void) |
| 620 | { |
| 621 | if (attach_flag || inferior_thisrun_terminal) |
| 622 | { |
| 623 | signal (SIGINT, osig); |
| 624 | } |
| 625 | } |
| 626 | \f |
| 627 | #if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN) |
| 628 | static void (*old_sigio) (); |
| 629 | |
| 630 | static void |
| 631 | handle_sigio (int signo) |
| 632 | { |
| 633 | int numfds; |
| 634 | fd_set readfds; |
| 635 | |
| 636 | signal (SIGIO, handle_sigio); |
| 637 | |
| 638 | FD_ZERO (&readfds); |
| 639 | FD_SET (target_activity_fd, &readfds); |
| 640 | numfds = gdb_select (target_activity_fd + 1, &readfds, NULL, NULL, NULL); |
| 641 | if (numfds >= 0 && FD_ISSET (target_activity_fd, &readfds)) |
| 642 | { |
| 643 | #ifndef _WIN32 |
| 644 | if ((*target_activity_function) ()) |
| 645 | kill (PIDGET (inferior_ptid), SIGINT); |
| 646 | #endif |
| 647 | } |
| 648 | } |
| 649 | |
| 650 | static int old_fcntl_flags; |
| 651 | |
| 652 | void |
| 653 | set_sigio_trap (void) |
| 654 | { |
| 655 | if (target_activity_function) |
| 656 | { |
| 657 | old_sigio = (void (*)()) signal (SIGIO, handle_sigio); |
| 658 | fcntl (target_activity_fd, F_SETOWN, getpid ()); |
| 659 | old_fcntl_flags = fcntl (target_activity_fd, F_GETFL, 0); |
| 660 | fcntl (target_activity_fd, F_SETFL, old_fcntl_flags | FASYNC); |
| 661 | } |
| 662 | } |
| 663 | |
| 664 | void |
| 665 | clear_sigio_trap (void) |
| 666 | { |
| 667 | if (target_activity_function) |
| 668 | { |
| 669 | signal (SIGIO, old_sigio); |
| 670 | fcntl (target_activity_fd, F_SETFL, old_fcntl_flags); |
| 671 | } |
| 672 | } |
| 673 | #else /* No SIGIO. */ |
| 674 | void |
| 675 | set_sigio_trap (void) |
| 676 | { |
| 677 | if (target_activity_function) |
| 678 | internal_error (__FILE__, __LINE__, _("failed internal consistency check")); |
| 679 | } |
| 680 | |
| 681 | void |
| 682 | clear_sigio_trap (void) |
| 683 | { |
| 684 | if (target_activity_function) |
| 685 | internal_error (__FILE__, __LINE__, _("failed internal consistency check")); |
| 686 | } |
| 687 | #endif /* No SIGIO. */ |
| 688 | \f |
| 689 | |
| 690 | /* This is here because this is where we figure out whether we (probably) |
| 691 | have job control. Just using job_control only does part of it because |
| 692 | setpgid or setpgrp might not exist on a system without job control. |
| 693 | It might be considered misplaced (on the other hand, process groups and |
| 694 | job control are closely related to ttys). |
| 695 | |
| 696 | For a more clean implementation, in libiberty, put a setpgid which merely |
| 697 | calls setpgrp and a setpgrp which does nothing (any system with job control |
| 698 | will have one or the other). */ |
| 699 | int |
| 700 | gdb_setpgid (void) |
| 701 | { |
| 702 | int retval = 0; |
| 703 | |
| 704 | if (job_control) |
| 705 | { |
| 706 | #if defined (HAVE_TERMIOS) || defined (TIOCGPGRP) |
| 707 | #ifdef HAVE_SETPGID |
| 708 | /* The call setpgid (0, 0) is supposed to work and mean the same |
| 709 | thing as this, but on Ultrix 4.2A it fails with EPERM (and |
| 710 | setpgid (getpid (), getpid ()) succeeds). */ |
| 711 | retval = setpgid (getpid (), getpid ()); |
| 712 | #else |
| 713 | #ifdef HAVE_SETPGRP |
| 714 | #ifdef SETPGRP_VOID |
| 715 | retval = setpgrp (); |
| 716 | #else |
| 717 | retval = setpgrp (getpid (), getpid ()); |
| 718 | #endif |
| 719 | #endif /* HAVE_SETPGRP */ |
| 720 | #endif /* HAVE_SETPGID */ |
| 721 | #endif /* defined (HAVE_TERMIOS) || defined (TIOCGPGRP) */ |
| 722 | } |
| 723 | |
| 724 | return retval; |
| 725 | } |
| 726 | |
| 727 | /* Get all the current tty settings (including whether we have a |
| 728 | tty at all!). We can't do this in _initialize_inflow because |
| 729 | serial_fdopen() won't work until the serial_ops_list is |
| 730 | initialized, but we don't want to do it lazily either, so |
| 731 | that we can guarantee stdin_serial is opened if there is |
| 732 | a terminal. */ |
| 733 | void |
| 734 | initialize_stdin_serial (void) |
| 735 | { |
| 736 | stdin_serial = serial_fdopen (0); |
| 737 | } |
| 738 | |
| 739 | void |
| 740 | _initialize_inflow (void) |
| 741 | { |
| 742 | add_info ("terminal", term_info, |
| 743 | _("Print inferior's saved terminal status.")); |
| 744 | |
| 745 | add_com ("kill", class_run, kill_command, |
| 746 | _("Kill execution of program being debugged.")); |
| 747 | |
| 748 | inferior_ptid = null_ptid; |
| 749 | |
| 750 | terminal_is_ours = 1; |
| 751 | |
| 752 | /* OK, figure out whether we have job control. If neither termios nor |
| 753 | sgtty (i.e. termio or go32), leave job_control 0. */ |
| 754 | |
| 755 | #if defined (HAVE_TERMIOS) |
| 756 | /* Do all systems with termios have the POSIX way of identifying job |
| 757 | control? I hope so. */ |
| 758 | #ifdef _POSIX_JOB_CONTROL |
| 759 | job_control = 1; |
| 760 | #else |
| 761 | #ifdef _SC_JOB_CONTROL |
| 762 | job_control = sysconf (_SC_JOB_CONTROL); |
| 763 | #else |
| 764 | job_control = 0; /* have to assume the worst */ |
| 765 | #endif /* _SC_JOB_CONTROL */ |
| 766 | #endif /* _POSIX_JOB_CONTROL */ |
| 767 | #endif /* HAVE_TERMIOS */ |
| 768 | |
| 769 | #ifdef HAVE_SGTTY |
| 770 | #ifdef TIOCGPGRP |
| 771 | job_control = 1; |
| 772 | #else |
| 773 | job_control = 0; |
| 774 | #endif /* TIOCGPGRP */ |
| 775 | #endif /* sgtty */ |
| 776 | } |