| 1 | /* Low level interface to ptrace, for GDB when running under Unix. |
| 2 | Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, |
| 3 | 1996, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. |
| 4 | |
| 5 | This file is part of GDB. |
| 6 | |
| 7 | This program is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 2 of the License, or |
| 10 | (at your option) any later version. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 59 Temple Place - Suite 330, |
| 20 | Boston, MA 02111-1307, USA. */ |
| 21 | |
| 22 | #include "defs.h" |
| 23 | #include "frame.h" |
| 24 | #include "inferior.h" |
| 25 | #include "command.h" |
| 26 | #include "serial.h" |
| 27 | #include "terminal.h" |
| 28 | #include "target.h" |
| 29 | #include "gdbthread.h" |
| 30 | |
| 31 | #include "gdb_string.h" |
| 32 | #include <signal.h> |
| 33 | #include <fcntl.h> |
| 34 | #ifdef HAVE_SYS_SELECT_H |
| 35 | #include <sys/select.h> |
| 36 | #endif |
| 37 | |
| 38 | #include "inflow.h" |
| 39 | |
| 40 | #ifdef HAVE_SYS_IOCTL_H |
| 41 | #include <sys/ioctl.h> |
| 42 | #endif |
| 43 | |
| 44 | #if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN) |
| 45 | static void handle_sigio (int); |
| 46 | #endif |
| 47 | |
| 48 | extern void _initialize_inflow (void); |
| 49 | |
| 50 | static void pass_signal (int); |
| 51 | |
| 52 | static void kill_command (char *, int); |
| 53 | |
| 54 | static void terminal_ours_1 (int); |
| 55 | \f |
| 56 | /* Record terminal status separately for debugger and inferior. */ |
| 57 | |
| 58 | static struct serial *stdin_serial; |
| 59 | |
| 60 | /* TTY state for the inferior. We save it whenever the inferior stops, and |
| 61 | restore it when it resumes. */ |
| 62 | static serial_ttystate inferior_ttystate; |
| 63 | |
| 64 | /* Our own tty state, which we restore every time we need to deal with the |
| 65 | terminal. We only set it once, when GDB first starts. The settings of |
| 66 | flags which readline saves and restores and unimportant. */ |
| 67 | static serial_ttystate our_ttystate; |
| 68 | |
| 69 | /* fcntl flags for us and the inferior. Saved and restored just like |
| 70 | {our,inferior}_ttystate. */ |
| 71 | static int tflags_inferior; |
| 72 | static int tflags_ours; |
| 73 | |
| 74 | #ifdef PROCESS_GROUP_TYPE |
| 75 | /* Process group for us and the inferior. Saved and restored just like |
| 76 | {our,inferior}_ttystate. */ |
| 77 | PROCESS_GROUP_TYPE our_process_group; |
| 78 | PROCESS_GROUP_TYPE inferior_process_group; |
| 79 | #endif |
| 80 | |
| 81 | /* While the inferior is running, we want SIGINT and SIGQUIT to go to the |
| 82 | inferior only. If we have job control, that takes care of it. If not, |
| 83 | we save our handlers in these two variables and set SIGINT and SIGQUIT |
| 84 | to SIG_IGN. */ |
| 85 | |
| 86 | static void (*sigint_ours) (); |
| 87 | static void (*sigquit_ours) (); |
| 88 | |
| 89 | /* The name of the tty (from the `tty' command) that we gave to the inferior |
| 90 | when it was last started. */ |
| 91 | |
| 92 | static char *inferior_thisrun_terminal; |
| 93 | |
| 94 | /* Nonzero if our terminal settings are in effect. Zero if the |
| 95 | inferior's settings are in effect. Ignored if !gdb_has_a_terminal |
| 96 | (). */ |
| 97 | |
| 98 | int terminal_is_ours; |
| 99 | |
| 100 | enum |
| 101 | { |
| 102 | yes, no, have_not_checked |
| 103 | } |
| 104 | gdb_has_a_terminal_flag = have_not_checked; |
| 105 | |
| 106 | /* Does GDB have a terminal (on stdin)? */ |
| 107 | int |
| 108 | gdb_has_a_terminal (void) |
| 109 | { |
| 110 | switch (gdb_has_a_terminal_flag) |
| 111 | { |
| 112 | case yes: |
| 113 | return 1; |
| 114 | case no: |
| 115 | return 0; |
| 116 | case have_not_checked: |
| 117 | /* Get all the current tty settings (including whether we have a |
| 118 | tty at all!). Can't do this in _initialize_inflow because |
| 119 | serial_fdopen() won't work until the serial_ops_list is |
| 120 | initialized. */ |
| 121 | |
| 122 | #ifdef F_GETFL |
| 123 | tflags_ours = fcntl (0, F_GETFL, 0); |
| 124 | #endif |
| 125 | |
| 126 | gdb_has_a_terminal_flag = no; |
| 127 | stdin_serial = serial_fdopen (0); |
| 128 | if (stdin_serial != NULL) |
| 129 | { |
| 130 | our_ttystate = serial_get_tty_state (stdin_serial); |
| 131 | |
| 132 | if (our_ttystate != NULL) |
| 133 | { |
| 134 | gdb_has_a_terminal_flag = yes; |
| 135 | #ifdef HAVE_TERMIOS |
| 136 | our_process_group = tcgetpgrp (0); |
| 137 | #endif |
| 138 | #ifdef HAVE_TERMIO |
| 139 | our_process_group = getpgrp (); |
| 140 | #endif |
| 141 | #ifdef HAVE_SGTTY |
| 142 | ioctl (0, TIOCGPGRP, &our_process_group); |
| 143 | #endif |
| 144 | } |
| 145 | } |
| 146 | |
| 147 | return gdb_has_a_terminal_flag == yes; |
| 148 | default: |
| 149 | /* "Can't happen". */ |
| 150 | return 0; |
| 151 | } |
| 152 | } |
| 153 | |
| 154 | /* Macro for printing errors from ioctl operations */ |
| 155 | |
| 156 | #define OOPSY(what) \ |
| 157 | if (result == -1) \ |
| 158 | fprintf_unfiltered(gdb_stderr, "[%s failed in terminal_inferior: %s]\n", \ |
| 159 | what, safe_strerror (errno)) |
| 160 | |
| 161 | static void terminal_ours_1 (int); |
| 162 | |
| 163 | /* Initialize the terminal settings we record for the inferior, |
| 164 | before we actually run the inferior. */ |
| 165 | |
| 166 | void |
| 167 | terminal_init_inferior_with_pgrp (int pgrp) |
| 168 | { |
| 169 | if (gdb_has_a_terminal ()) |
| 170 | { |
| 171 | /* We could just as well copy our_ttystate (if we felt like |
| 172 | adding a new function serial_copy_tty_state()). */ |
| 173 | if (inferior_ttystate) |
| 174 | xfree (inferior_ttystate); |
| 175 | inferior_ttystate = serial_get_tty_state (stdin_serial); |
| 176 | |
| 177 | #ifdef PROCESS_GROUP_TYPE |
| 178 | inferior_process_group = pgrp; |
| 179 | #endif |
| 180 | |
| 181 | /* Make sure that next time we call terminal_inferior (which will be |
| 182 | before the program runs, as it needs to be), we install the new |
| 183 | process group. */ |
| 184 | terminal_is_ours = 1; |
| 185 | } |
| 186 | } |
| 187 | |
| 188 | /* Save the terminal settings again. This is necessary for the TUI |
| 189 | when it switches to TUI or non-TUI mode; curses changes the terminal |
| 190 | and gdb must be able to restore it correctly. */ |
| 191 | |
| 192 | void |
| 193 | terminal_save_ours (void) |
| 194 | { |
| 195 | if (gdb_has_a_terminal ()) |
| 196 | { |
| 197 | /* We could just as well copy our_ttystate (if we felt like adding |
| 198 | a new function serial_copy_tty_state). */ |
| 199 | if (our_ttystate) |
| 200 | xfree (our_ttystate); |
| 201 | our_ttystate = serial_get_tty_state (stdin_serial); |
| 202 | } |
| 203 | } |
| 204 | |
| 205 | void |
| 206 | terminal_init_inferior (void) |
| 207 | { |
| 208 | #ifdef PROCESS_GROUP_TYPE |
| 209 | /* This is for Lynx, and should be cleaned up by having Lynx be a separate |
| 210 | debugging target with a version of target_terminal_init_inferior which |
| 211 | passes in the process group to a generic routine which does all the work |
| 212 | (and the non-threaded child_terminal_init_inferior can just pass in |
| 213 | inferior_ptid to the same routine). */ |
| 214 | /* We assume INFERIOR_PID is also the child's process group. */ |
| 215 | terminal_init_inferior_with_pgrp (PIDGET (inferior_ptid)); |
| 216 | #endif /* PROCESS_GROUP_TYPE */ |
| 217 | } |
| 218 | |
| 219 | /* Put the inferior's terminal settings into effect. |
| 220 | This is preparation for starting or resuming the inferior. */ |
| 221 | |
| 222 | void |
| 223 | terminal_inferior (void) |
| 224 | { |
| 225 | if (gdb_has_a_terminal () && terminal_is_ours |
| 226 | && inferior_thisrun_terminal == 0) |
| 227 | { |
| 228 | int result; |
| 229 | |
| 230 | #ifdef F_GETFL |
| 231 | /* Is there a reason this is being done twice? It happens both |
| 232 | places we use F_SETFL, so I'm inclined to think perhaps there |
| 233 | is some reason, however perverse. Perhaps not though... */ |
| 234 | result = fcntl (0, F_SETFL, tflags_inferior); |
| 235 | result = fcntl (0, F_SETFL, tflags_inferior); |
| 236 | OOPSY ("fcntl F_SETFL"); |
| 237 | #endif |
| 238 | |
| 239 | /* Because we were careful to not change in or out of raw mode in |
| 240 | terminal_ours, we will not change in our out of raw mode with |
| 241 | this call, so we don't flush any input. */ |
| 242 | result = serial_set_tty_state (stdin_serial, inferior_ttystate); |
| 243 | OOPSY ("setting tty state"); |
| 244 | |
| 245 | if (!job_control) |
| 246 | { |
| 247 | sigint_ours = (void (*)()) signal (SIGINT, SIG_IGN); |
| 248 | #ifdef SIGQUIT |
| 249 | sigquit_ours = (void (*)()) signal (SIGQUIT, SIG_IGN); |
| 250 | #endif |
| 251 | } |
| 252 | |
| 253 | /* If attach_flag is set, we don't know whether we are sharing a |
| 254 | terminal with the inferior or not. (attaching a process |
| 255 | without a terminal is one case where we do not; attaching a |
| 256 | process which we ran from the same shell as GDB via `&' is |
| 257 | one case where we do, I think (but perhaps this is not |
| 258 | `sharing' in the sense that we need to save and restore tty |
| 259 | state)). I don't know if there is any way to tell whether we |
| 260 | are sharing a terminal. So what we do is to go through all |
| 261 | the saving and restoring of the tty state, but ignore errors |
| 262 | setting the process group, which will happen if we are not |
| 263 | sharing a terminal). */ |
| 264 | |
| 265 | if (job_control) |
| 266 | { |
| 267 | #ifdef HAVE_TERMIOS |
| 268 | result = tcsetpgrp (0, inferior_process_group); |
| 269 | if (!attach_flag) |
| 270 | OOPSY ("tcsetpgrp"); |
| 271 | #endif |
| 272 | |
| 273 | #ifdef HAVE_SGTTY |
| 274 | result = ioctl (0, TIOCSPGRP, &inferior_process_group); |
| 275 | if (!attach_flag) |
| 276 | OOPSY ("TIOCSPGRP"); |
| 277 | #endif |
| 278 | } |
| 279 | |
| 280 | } |
| 281 | terminal_is_ours = 0; |
| 282 | } |
| 283 | |
| 284 | /* Put some of our terminal settings into effect, |
| 285 | enough to get proper results from our output, |
| 286 | but do not change into or out of RAW mode |
| 287 | so that no input is discarded. |
| 288 | |
| 289 | After doing this, either terminal_ours or terminal_inferior |
| 290 | should be called to get back to a normal state of affairs. */ |
| 291 | |
| 292 | void |
| 293 | terminal_ours_for_output (void) |
| 294 | { |
| 295 | terminal_ours_1 (1); |
| 296 | } |
| 297 | |
| 298 | /* Put our terminal settings into effect. |
| 299 | First record the inferior's terminal settings |
| 300 | so they can be restored properly later. */ |
| 301 | |
| 302 | void |
| 303 | terminal_ours (void) |
| 304 | { |
| 305 | terminal_ours_1 (0); |
| 306 | } |
| 307 | |
| 308 | /* output_only is not used, and should not be used unless we introduce |
| 309 | separate terminal_is_ours and terminal_is_ours_for_output |
| 310 | flags. */ |
| 311 | |
| 312 | static void |
| 313 | terminal_ours_1 (int output_only) |
| 314 | { |
| 315 | /* Checking inferior_thisrun_terminal is necessary so that |
| 316 | if GDB is running in the background, it won't block trying |
| 317 | to do the ioctl()'s below. Checking gdb_has_a_terminal |
| 318 | avoids attempting all the ioctl's when running in batch. */ |
| 319 | if (inferior_thisrun_terminal != 0 || gdb_has_a_terminal () == 0) |
| 320 | return; |
| 321 | |
| 322 | if (!terminal_is_ours) |
| 323 | { |
| 324 | #ifdef SIGTTOU |
| 325 | /* Ignore this signal since it will happen when we try to set the |
| 326 | pgrp. */ |
| 327 | void (*osigttou) () = NULL; |
| 328 | #endif |
| 329 | int result; |
| 330 | |
| 331 | terminal_is_ours = 1; |
| 332 | |
| 333 | #ifdef SIGTTOU |
| 334 | if (job_control) |
| 335 | osigttou = (void (*)()) signal (SIGTTOU, SIG_IGN); |
| 336 | #endif |
| 337 | |
| 338 | if (inferior_ttystate) |
| 339 | xfree (inferior_ttystate); |
| 340 | inferior_ttystate = serial_get_tty_state (stdin_serial); |
| 341 | #ifdef HAVE_TERMIOS |
| 342 | inferior_process_group = tcgetpgrp (0); |
| 343 | #endif |
| 344 | #ifdef HAVE_TERMIO |
| 345 | inferior_process_group = getpgrp (); |
| 346 | #endif |
| 347 | #ifdef HAVE_SGTTY |
| 348 | ioctl (0, TIOCGPGRP, &inferior_process_group); |
| 349 | #endif |
| 350 | |
| 351 | /* Here we used to set ICANON in our ttystate, but I believe this |
| 352 | was an artifact from before when we used readline. Readline sets |
| 353 | the tty state when it needs to. |
| 354 | FIXME-maybe: However, query() expects non-raw mode and doesn't |
| 355 | use readline. Maybe query should use readline (on the other hand, |
| 356 | this only matters for HAVE_SGTTY, not termio or termios, I think). */ |
| 357 | |
| 358 | /* Set tty state to our_ttystate. We don't change in our out of raw |
| 359 | mode, to avoid flushing input. We need to do the same thing |
| 360 | regardless of output_only, because we don't have separate |
| 361 | terminal_is_ours and terminal_is_ours_for_output flags. It's OK, |
| 362 | though, since readline will deal with raw mode when/if it needs to. |
| 363 | */ |
| 364 | |
| 365 | serial_noflush_set_tty_state (stdin_serial, our_ttystate, |
| 366 | inferior_ttystate); |
| 367 | |
| 368 | if (job_control) |
| 369 | { |
| 370 | #ifdef HAVE_TERMIOS |
| 371 | result = tcsetpgrp (0, our_process_group); |
| 372 | #if 0 |
| 373 | /* This fails on Ultrix with EINVAL if you run the testsuite |
| 374 | in the background with nohup, and then log out. GDB never |
| 375 | used to check for an error here, so perhaps there are other |
| 376 | such situations as well. */ |
| 377 | if (result == -1) |
| 378 | fprintf_unfiltered (gdb_stderr, "[tcsetpgrp failed in terminal_ours: %s]\n", |
| 379 | safe_strerror (errno)); |
| 380 | #endif |
| 381 | #endif /* termios */ |
| 382 | |
| 383 | #ifdef HAVE_SGTTY |
| 384 | result = ioctl (0, TIOCSPGRP, &our_process_group); |
| 385 | #endif |
| 386 | } |
| 387 | |
| 388 | #ifdef SIGTTOU |
| 389 | if (job_control) |
| 390 | signal (SIGTTOU, osigttou); |
| 391 | #endif |
| 392 | |
| 393 | if (!job_control) |
| 394 | { |
| 395 | signal (SIGINT, sigint_ours); |
| 396 | #ifdef SIGQUIT |
| 397 | signal (SIGQUIT, sigquit_ours); |
| 398 | #endif |
| 399 | } |
| 400 | |
| 401 | #ifdef F_GETFL |
| 402 | tflags_inferior = fcntl (0, F_GETFL, 0); |
| 403 | |
| 404 | /* Is there a reason this is being done twice? It happens both |
| 405 | places we use F_SETFL, so I'm inclined to think perhaps there |
| 406 | is some reason, however perverse. Perhaps not though... */ |
| 407 | result = fcntl (0, F_SETFL, tflags_ours); |
| 408 | result = fcntl (0, F_SETFL, tflags_ours); |
| 409 | #endif |
| 410 | |
| 411 | result = result; /* lint */ |
| 412 | } |
| 413 | } |
| 414 | |
| 415 | void |
| 416 | term_info (char *arg, int from_tty) |
| 417 | { |
| 418 | target_terminal_info (arg, from_tty); |
| 419 | } |
| 420 | |
| 421 | void |
| 422 | child_terminal_info (char *args, int from_tty) |
| 423 | { |
| 424 | if (!gdb_has_a_terminal ()) |
| 425 | { |
| 426 | printf_filtered ("This GDB does not control a terminal.\n"); |
| 427 | return; |
| 428 | } |
| 429 | |
| 430 | printf_filtered ("Inferior's terminal status (currently saved by GDB):\n"); |
| 431 | |
| 432 | /* First the fcntl flags. */ |
| 433 | { |
| 434 | int flags; |
| 435 | |
| 436 | flags = tflags_inferior; |
| 437 | |
| 438 | printf_filtered ("File descriptor flags = "); |
| 439 | |
| 440 | #ifndef O_ACCMODE |
| 441 | #define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR) |
| 442 | #endif |
| 443 | /* (O_ACCMODE) parens are to avoid Ultrix header file bug */ |
| 444 | switch (flags & (O_ACCMODE)) |
| 445 | { |
| 446 | case O_RDONLY: |
| 447 | printf_filtered ("O_RDONLY"); |
| 448 | break; |
| 449 | case O_WRONLY: |
| 450 | printf_filtered ("O_WRONLY"); |
| 451 | break; |
| 452 | case O_RDWR: |
| 453 | printf_filtered ("O_RDWR"); |
| 454 | break; |
| 455 | } |
| 456 | flags &= ~(O_ACCMODE); |
| 457 | |
| 458 | #ifdef O_NONBLOCK |
| 459 | if (flags & O_NONBLOCK) |
| 460 | printf_filtered (" | O_NONBLOCK"); |
| 461 | flags &= ~O_NONBLOCK; |
| 462 | #endif |
| 463 | |
| 464 | #if defined (O_NDELAY) |
| 465 | /* If O_NDELAY and O_NONBLOCK are defined to the same thing, we will |
| 466 | print it as O_NONBLOCK, which is good cause that is what POSIX |
| 467 | has, and the flag will already be cleared by the time we get here. */ |
| 468 | if (flags & O_NDELAY) |
| 469 | printf_filtered (" | O_NDELAY"); |
| 470 | flags &= ~O_NDELAY; |
| 471 | #endif |
| 472 | |
| 473 | if (flags & O_APPEND) |
| 474 | printf_filtered (" | O_APPEND"); |
| 475 | flags &= ~O_APPEND; |
| 476 | |
| 477 | #if defined (O_BINARY) |
| 478 | if (flags & O_BINARY) |
| 479 | printf_filtered (" | O_BINARY"); |
| 480 | flags &= ~O_BINARY; |
| 481 | #endif |
| 482 | |
| 483 | if (flags) |
| 484 | printf_filtered (" | 0x%x", flags); |
| 485 | printf_filtered ("\n"); |
| 486 | } |
| 487 | |
| 488 | #ifdef PROCESS_GROUP_TYPE |
| 489 | printf_filtered ("Process group = %d\n", |
| 490 | (int) inferior_process_group); |
| 491 | #endif |
| 492 | |
| 493 | serial_print_tty_state (stdin_serial, inferior_ttystate, gdb_stdout); |
| 494 | } |
| 495 | \f |
| 496 | /* NEW_TTY_PREFORK is called before forking a new child process, |
| 497 | so we can record the state of ttys in the child to be formed. |
| 498 | TTYNAME is null if we are to share the terminal with gdb; |
| 499 | or points to a string containing the name of the desired tty. |
| 500 | |
| 501 | NEW_TTY is called in new child processes under Unix, which will |
| 502 | become debugger target processes. This actually switches to |
| 503 | the terminal specified in the NEW_TTY_PREFORK call. */ |
| 504 | |
| 505 | void |
| 506 | new_tty_prefork (char *ttyname) |
| 507 | { |
| 508 | /* Save the name for later, for determining whether we and the child |
| 509 | are sharing a tty. */ |
| 510 | inferior_thisrun_terminal = ttyname; |
| 511 | } |
| 512 | |
| 513 | void |
| 514 | new_tty (void) |
| 515 | { |
| 516 | int tty; |
| 517 | |
| 518 | if (inferior_thisrun_terminal == 0) |
| 519 | return; |
| 520 | #if !defined(__GO32__) && !defined(_WIN32) |
| 521 | #ifdef TIOCNOTTY |
| 522 | /* Disconnect the child process from our controlling terminal. On some |
| 523 | systems (SVR4 for example), this may cause a SIGTTOU, so temporarily |
| 524 | ignore SIGTTOU. */ |
| 525 | tty = open ("/dev/tty", O_RDWR); |
| 526 | if (tty > 0) |
| 527 | { |
| 528 | void (*osigttou) (); |
| 529 | |
| 530 | osigttou = (void (*)()) signal (SIGTTOU, SIG_IGN); |
| 531 | ioctl (tty, TIOCNOTTY, 0); |
| 532 | close (tty); |
| 533 | signal (SIGTTOU, osigttou); |
| 534 | } |
| 535 | #endif |
| 536 | |
| 537 | /* Now open the specified new terminal. */ |
| 538 | |
| 539 | #ifdef USE_O_NOCTTY |
| 540 | tty = open (inferior_thisrun_terminal, O_RDWR | O_NOCTTY); |
| 541 | #else |
| 542 | tty = open (inferior_thisrun_terminal, O_RDWR); |
| 543 | #endif |
| 544 | if (tty == -1) |
| 545 | { |
| 546 | print_sys_errmsg (inferior_thisrun_terminal, errno); |
| 547 | _exit (1); |
| 548 | } |
| 549 | |
| 550 | /* Avoid use of dup2; doesn't exist on all systems. */ |
| 551 | if (tty != 0) |
| 552 | { |
| 553 | close (0); |
| 554 | dup (tty); |
| 555 | } |
| 556 | if (tty != 1) |
| 557 | { |
| 558 | close (1); |
| 559 | dup (tty); |
| 560 | } |
| 561 | if (tty != 2) |
| 562 | { |
| 563 | close (2); |
| 564 | dup (tty); |
| 565 | } |
| 566 | if (tty > 2) |
| 567 | close (tty); |
| 568 | #endif /* !go32 && !win32 */ |
| 569 | } |
| 570 | \f |
| 571 | /* Kill the inferior process. Make us have no inferior. */ |
| 572 | |
| 573 | static void |
| 574 | kill_command (char *arg, int from_tty) |
| 575 | { |
| 576 | /* FIXME: This should not really be inferior_ptid (or target_has_execution). |
| 577 | It should be a distinct flag that indicates that a target is active, cuz |
| 578 | some targets don't have processes! */ |
| 579 | |
| 580 | if (ptid_equal (inferior_ptid, null_ptid)) |
| 581 | error ("The program is not being run."); |
| 582 | if (!query ("Kill the program being debugged? ")) |
| 583 | error ("Not confirmed."); |
| 584 | target_kill (); |
| 585 | |
| 586 | init_thread_list (); /* Destroy thread info */ |
| 587 | |
| 588 | /* Killing off the inferior can leave us with a core file. If so, |
| 589 | print the state we are left in. */ |
| 590 | if (target_has_stack) |
| 591 | { |
| 592 | printf_filtered ("In %s,\n", target_longname); |
| 593 | if (deprecated_selected_frame == NULL) |
| 594 | fputs_filtered ("No selected stack frame.\n", gdb_stdout); |
| 595 | else |
| 596 | print_stack_frame (deprecated_selected_frame, |
| 597 | frame_relative_level (deprecated_selected_frame), 1); |
| 598 | } |
| 599 | } |
| 600 | \f |
| 601 | /* Call set_sigint_trap when you need to pass a signal on to an attached |
| 602 | process when handling SIGINT */ |
| 603 | |
| 604 | static void |
| 605 | pass_signal (int signo) |
| 606 | { |
| 607 | #ifndef _WIN32 |
| 608 | kill (PIDGET (inferior_ptid), SIGINT); |
| 609 | #endif |
| 610 | } |
| 611 | |
| 612 | static void (*osig) (); |
| 613 | |
| 614 | void |
| 615 | set_sigint_trap (void) |
| 616 | { |
| 617 | if (attach_flag || inferior_thisrun_terminal) |
| 618 | { |
| 619 | osig = (void (*)()) signal (SIGINT, pass_signal); |
| 620 | } |
| 621 | } |
| 622 | |
| 623 | void |
| 624 | clear_sigint_trap (void) |
| 625 | { |
| 626 | if (attach_flag || inferior_thisrun_terminal) |
| 627 | { |
| 628 | signal (SIGINT, osig); |
| 629 | } |
| 630 | } |
| 631 | \f |
| 632 | #if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN) |
| 633 | static void (*old_sigio) (); |
| 634 | |
| 635 | static void |
| 636 | handle_sigio (int signo) |
| 637 | { |
| 638 | int numfds; |
| 639 | fd_set readfds; |
| 640 | |
| 641 | signal (SIGIO, handle_sigio); |
| 642 | |
| 643 | FD_ZERO (&readfds); |
| 644 | FD_SET (target_activity_fd, &readfds); |
| 645 | numfds = select (target_activity_fd + 1, &readfds, NULL, NULL, NULL); |
| 646 | if (numfds >= 0 && FD_ISSET (target_activity_fd, &readfds)) |
| 647 | { |
| 648 | #ifndef _WIN32 |
| 649 | if ((*target_activity_function) ()) |
| 650 | kill (PIDGET (inferior_ptid), SIGINT); |
| 651 | #endif |
| 652 | } |
| 653 | } |
| 654 | |
| 655 | static int old_fcntl_flags; |
| 656 | |
| 657 | void |
| 658 | set_sigio_trap (void) |
| 659 | { |
| 660 | if (target_activity_function) |
| 661 | { |
| 662 | old_sigio = (void (*)()) signal (SIGIO, handle_sigio); |
| 663 | fcntl (target_activity_fd, F_SETOWN, getpid ()); |
| 664 | old_fcntl_flags = fcntl (target_activity_fd, F_GETFL, 0); |
| 665 | fcntl (target_activity_fd, F_SETFL, old_fcntl_flags | FASYNC); |
| 666 | } |
| 667 | } |
| 668 | |
| 669 | void |
| 670 | clear_sigio_trap (void) |
| 671 | { |
| 672 | if (target_activity_function) |
| 673 | { |
| 674 | signal (SIGIO, old_sigio); |
| 675 | fcntl (target_activity_fd, F_SETFL, old_fcntl_flags); |
| 676 | } |
| 677 | } |
| 678 | #else /* No SIGIO. */ |
| 679 | void |
| 680 | set_sigio_trap (void) |
| 681 | { |
| 682 | if (target_activity_function) |
| 683 | internal_error (__FILE__, __LINE__, "failed internal consistency check"); |
| 684 | } |
| 685 | |
| 686 | void |
| 687 | clear_sigio_trap (void) |
| 688 | { |
| 689 | if (target_activity_function) |
| 690 | internal_error (__FILE__, __LINE__, "failed internal consistency check"); |
| 691 | } |
| 692 | #endif /* No SIGIO. */ |
| 693 | \f |
| 694 | |
| 695 | /* This is here because this is where we figure out whether we (probably) |
| 696 | have job control. Just using job_control only does part of it because |
| 697 | setpgid or setpgrp might not exist on a system without job control. |
| 698 | It might be considered misplaced (on the other hand, process groups and |
| 699 | job control are closely related to ttys). |
| 700 | |
| 701 | For a more clean implementation, in libiberty, put a setpgid which merely |
| 702 | calls setpgrp and a setpgrp which does nothing (any system with job control |
| 703 | will have one or the other). */ |
| 704 | int |
| 705 | gdb_setpgid (void) |
| 706 | { |
| 707 | int retval = 0; |
| 708 | |
| 709 | if (job_control) |
| 710 | { |
| 711 | #if defined (HAVE_TERMIOS) || defined (TIOCGPGRP) |
| 712 | #ifdef HAVE_SETPGID |
| 713 | /* The call setpgid (0, 0) is supposed to work and mean the same |
| 714 | thing as this, but on Ultrix 4.2A it fails with EPERM (and |
| 715 | setpgid (getpid (), getpid ()) succeeds). */ |
| 716 | retval = setpgid (getpid (), getpid ()); |
| 717 | #else |
| 718 | #ifdef HAVE_SETPGRP |
| 719 | #ifdef SETPGRP_VOID |
| 720 | retval = setpgrp (); |
| 721 | #else |
| 722 | retval = setpgrp (getpid (), getpid ()); |
| 723 | #endif |
| 724 | #endif /* HAVE_SETPGRP */ |
| 725 | #endif /* HAVE_SETPGID */ |
| 726 | #endif /* defined (HAVE_TERMIOS) || defined (TIOCGPGRP) */ |
| 727 | } |
| 728 | |
| 729 | return retval; |
| 730 | } |
| 731 | |
| 732 | void |
| 733 | _initialize_inflow (void) |
| 734 | { |
| 735 | add_info ("terminal", term_info, |
| 736 | "Print inferior's saved terminal status."); |
| 737 | |
| 738 | add_com ("kill", class_run, kill_command, |
| 739 | "Kill execution of program being debugged."); |
| 740 | |
| 741 | inferior_ptid = null_ptid; |
| 742 | |
| 743 | terminal_is_ours = 1; |
| 744 | |
| 745 | /* OK, figure out whether we have job control. If neither termios nor |
| 746 | sgtty (i.e. termio or go32), leave job_control 0. */ |
| 747 | |
| 748 | #if defined (HAVE_TERMIOS) |
| 749 | /* Do all systems with termios have the POSIX way of identifying job |
| 750 | control? I hope so. */ |
| 751 | #ifdef _POSIX_JOB_CONTROL |
| 752 | job_control = 1; |
| 753 | #else |
| 754 | #ifdef _SC_JOB_CONTROL |
| 755 | job_control = sysconf (_SC_JOB_CONTROL); |
| 756 | #else |
| 757 | job_control = 0; /* have to assume the worst */ |
| 758 | #endif /* _SC_JOB_CONTROL */ |
| 759 | #endif /* _POSIX_JOB_CONTROL */ |
| 760 | #endif /* HAVE_TERMIOS */ |
| 761 | |
| 762 | #ifdef HAVE_SGTTY |
| 763 | #ifdef TIOCGPGRP |
| 764 | job_control = 1; |
| 765 | #else |
| 766 | job_control = 0; |
| 767 | #endif /* TIOCGPGRP */ |
| 768 | #endif /* sgtty */ |
| 769 | } |