| 1 | /* Read a symbol table in ECOFF format (Third-Eye). |
| 2 | |
| 3 | Copyright (C) 1986-2015 Free Software Foundation, Inc. |
| 4 | |
| 5 | Original version contributed by Alessandro Forin (af@cs.cmu.edu) at |
| 6 | CMU. Major work by Per Bothner, John Gilmore and Ian Lance Taylor |
| 7 | at Cygnus Support. |
| 8 | |
| 9 | This file is part of GDB. |
| 10 | |
| 11 | This program is free software; you can redistribute it and/or modify |
| 12 | it under the terms of the GNU General Public License as published by |
| 13 | the Free Software Foundation; either version 3 of the License, or |
| 14 | (at your option) any later version. |
| 15 | |
| 16 | This program is distributed in the hope that it will be useful, |
| 17 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 | GNU General Public License for more details. |
| 20 | |
| 21 | You should have received a copy of the GNU General Public License |
| 22 | along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| 23 | |
| 24 | /* This module provides the function mdebug_build_psymtabs. It reads |
| 25 | ECOFF debugging information into partial symbol tables. The |
| 26 | debugging information is read from two structures. A struct |
| 27 | ecoff_debug_swap includes the sizes of each ECOFF structure and |
| 28 | swapping routines; these are fixed for a particular target. A |
| 29 | struct ecoff_debug_info points to the debugging information for a |
| 30 | particular object file. |
| 31 | |
| 32 | ECOFF symbol tables are mostly written in the byte order of the |
| 33 | target machine. However, one section of the table (the auxiliary |
| 34 | symbol information) is written in the host byte order. There is a |
| 35 | bit in the other symbol info which describes which host byte order |
| 36 | was used. ECOFF thereby takes the trophy from Intel `b.out' for |
| 37 | the most brain-dead adaptation of a file format to byte order. |
| 38 | |
| 39 | This module can read all four of the known byte-order combinations, |
| 40 | on any type of host. */ |
| 41 | |
| 42 | #include "defs.h" |
| 43 | #include "symtab.h" |
| 44 | #include "gdbtypes.h" |
| 45 | #include "gdbcore.h" |
| 46 | #include "filenames.h" |
| 47 | #include "objfiles.h" |
| 48 | #include "gdb_obstack.h" |
| 49 | #include "buildsym.h" |
| 50 | #include "stabsread.h" |
| 51 | #include "complaints.h" |
| 52 | #include "demangle.h" |
| 53 | #include "gdb-demangle.h" |
| 54 | #include "block.h" |
| 55 | #include "dictionary.h" |
| 56 | #include "mdebugread.h" |
| 57 | #include <sys/stat.h> |
| 58 | #include "psympriv.h" |
| 59 | #include "source.h" |
| 60 | |
| 61 | #include "bfd.h" |
| 62 | |
| 63 | #include "coff/ecoff.h" /* COFF-like aspects of ecoff files. */ |
| 64 | |
| 65 | #include "libaout.h" /* Private BFD a.out information. */ |
| 66 | #include "aout/aout64.h" |
| 67 | #include "aout/stab_gnu.h" /* STABS information. */ |
| 68 | |
| 69 | #include "expression.h" |
| 70 | |
| 71 | extern void _initialize_mdebugread (void); |
| 72 | |
| 73 | /* Provide a way to test if we have both ECOFF and ELF symbol tables. |
| 74 | We use this define in order to know whether we should override a |
| 75 | symbol's ECOFF section with its ELF section. This is necessary in |
| 76 | case the symbol's ELF section could not be represented in ECOFF. */ |
| 77 | #define ECOFF_IN_ELF(bfd) (bfd_get_flavour (bfd) == bfd_target_elf_flavour \ |
| 78 | && bfd_get_section_by_name (bfd, ".mdebug") != NULL) |
| 79 | |
| 80 | /* The objfile we are currently reading. */ |
| 81 | |
| 82 | static struct objfile *mdebugread_objfile; |
| 83 | |
| 84 | \f |
| 85 | |
| 86 | /* We put a pointer to this structure in the read_symtab_private field |
| 87 | of the psymtab. */ |
| 88 | |
| 89 | struct symloc |
| 90 | { |
| 91 | /* Index of the FDR that this psymtab represents. */ |
| 92 | int fdr_idx; |
| 93 | /* The BFD that the psymtab was created from. */ |
| 94 | bfd *cur_bfd; |
| 95 | const struct ecoff_debug_swap *debug_swap; |
| 96 | struct ecoff_debug_info *debug_info; |
| 97 | struct mdebug_pending **pending_list; |
| 98 | /* Pointer to external symbols for this file. */ |
| 99 | EXTR *extern_tab; |
| 100 | /* Size of extern_tab. */ |
| 101 | int extern_count; |
| 102 | enum language pst_language; |
| 103 | }; |
| 104 | |
| 105 | #define PST_PRIVATE(p) ((struct symloc *)(p)->read_symtab_private) |
| 106 | #define FDR_IDX(p) (PST_PRIVATE(p)->fdr_idx) |
| 107 | #define CUR_BFD(p) (PST_PRIVATE(p)->cur_bfd) |
| 108 | #define DEBUG_SWAP(p) (PST_PRIVATE(p)->debug_swap) |
| 109 | #define DEBUG_INFO(p) (PST_PRIVATE(p)->debug_info) |
| 110 | #define PENDING_LIST(p) (PST_PRIVATE(p)->pending_list) |
| 111 | |
| 112 | #define SC_IS_TEXT(sc) ((sc) == scText \ |
| 113 | || (sc) == scRConst \ |
| 114 | || (sc) == scInit \ |
| 115 | || (sc) == scFini) |
| 116 | #define SC_IS_DATA(sc) ((sc) == scData \ |
| 117 | || (sc) == scSData \ |
| 118 | || (sc) == scRData \ |
| 119 | || (sc) == scPData \ |
| 120 | || (sc) == scXData) |
| 121 | #define SC_IS_COMMON(sc) ((sc) == scCommon || (sc) == scSCommon) |
| 122 | #define SC_IS_BSS(sc) ((sc) == scBss) |
| 123 | #define SC_IS_SBSS(sc) ((sc) == scSBss) |
| 124 | #define SC_IS_UNDEF(sc) ((sc) == scUndefined || (sc) == scSUndefined) |
| 125 | \f |
| 126 | /* Various complaints about symbol reading that don't abort the process. */ |
| 127 | static void |
| 128 | index_complaint (const char *arg1) |
| 129 | { |
| 130 | complaint (&symfile_complaints, _("bad aux index at symbol %s"), arg1); |
| 131 | } |
| 132 | |
| 133 | static void |
| 134 | unknown_ext_complaint (const char *arg1) |
| 135 | { |
| 136 | complaint (&symfile_complaints, _("unknown external symbol %s"), arg1); |
| 137 | } |
| 138 | |
| 139 | static void |
| 140 | basic_type_complaint (int arg1, const char *arg2) |
| 141 | { |
| 142 | complaint (&symfile_complaints, _("cannot map ECOFF basic type 0x%x for %s"), |
| 143 | arg1, arg2); |
| 144 | } |
| 145 | |
| 146 | static void |
| 147 | bad_tag_guess_complaint (const char *arg1) |
| 148 | { |
| 149 | complaint (&symfile_complaints, |
| 150 | _("guessed tag type of %s incorrectly"), arg1); |
| 151 | } |
| 152 | |
| 153 | static void |
| 154 | bad_rfd_entry_complaint (const char *arg1, int arg2, int arg3) |
| 155 | { |
| 156 | complaint (&symfile_complaints, _("bad rfd entry for %s: file %d, index %d"), |
| 157 | arg1, arg2, arg3); |
| 158 | } |
| 159 | |
| 160 | static void |
| 161 | unexpected_type_code_complaint (const char *arg1) |
| 162 | { |
| 163 | complaint (&symfile_complaints, _("unexpected type code for %s"), arg1); |
| 164 | } |
| 165 | |
| 166 | /* Macros and extra defs. */ |
| 167 | |
| 168 | /* Puns: hard to find whether -g was used and how. */ |
| 169 | |
| 170 | #define MIN_GLEVEL GLEVEL_0 |
| 171 | #define compare_glevel(a,b) \ |
| 172 | (((a) == GLEVEL_3) ? ((b) < GLEVEL_3) : \ |
| 173 | ((b) == GLEVEL_3) ? -1 : (int)((b) - (a))) |
| 174 | \f |
| 175 | /* Things that really are local to this module. */ |
| 176 | |
| 177 | /* Remember what we deduced to be the source language of this psymtab. */ |
| 178 | |
| 179 | static enum language psymtab_language = language_unknown; |
| 180 | |
| 181 | /* Current BFD. */ |
| 182 | |
| 183 | static bfd *cur_bfd; |
| 184 | |
| 185 | /* How to parse debugging information for CUR_BFD. */ |
| 186 | |
| 187 | static const struct ecoff_debug_swap *debug_swap; |
| 188 | |
| 189 | /* Pointers to debugging information for CUR_BFD. */ |
| 190 | |
| 191 | static struct ecoff_debug_info *debug_info; |
| 192 | |
| 193 | /* Pointer to current file decriptor record, and its index. */ |
| 194 | |
| 195 | static FDR *cur_fdr; |
| 196 | static int cur_fd; |
| 197 | |
| 198 | /* Index of current symbol. */ |
| 199 | |
| 200 | static int cur_sdx; |
| 201 | |
| 202 | /* Note how much "debuggable" this image is. We would like |
| 203 | to see at least one FDR with full symbols. */ |
| 204 | |
| 205 | static int max_gdbinfo; |
| 206 | static int max_glevel; |
| 207 | |
| 208 | /* When examining .o files, report on undefined symbols. */ |
| 209 | |
| 210 | static int n_undef_symbols, n_undef_labels, n_undef_vars, n_undef_procs; |
| 211 | |
| 212 | /* Pseudo symbol to use when putting stabs into the symbol table. */ |
| 213 | |
| 214 | static char stabs_symbol[] = STABS_SYMBOL; |
| 215 | |
| 216 | /* Nonzero if we have seen ecoff debugging info for a file. */ |
| 217 | |
| 218 | static int found_ecoff_debugging_info; |
| 219 | |
| 220 | /* Forward declarations. */ |
| 221 | |
| 222 | static int upgrade_type (int, struct type **, int, union aux_ext *, |
| 223 | int, char *); |
| 224 | |
| 225 | static void parse_partial_symbols (struct objfile *); |
| 226 | |
| 227 | static int has_opaque_xref (FDR *, SYMR *); |
| 228 | |
| 229 | static int cross_ref (int, union aux_ext *, struct type **, enum type_code, |
| 230 | char **, int, char *); |
| 231 | |
| 232 | static struct symbol *new_symbol (char *); |
| 233 | |
| 234 | static struct type *new_type (char *); |
| 235 | |
| 236 | enum block_type { FUNCTION_BLOCK, NON_FUNCTION_BLOCK }; |
| 237 | |
| 238 | static struct block *new_block (enum block_type); |
| 239 | |
| 240 | static struct compunit_symtab *new_symtab (const char *, int, struct objfile *); |
| 241 | |
| 242 | static struct linetable *new_linetable (int); |
| 243 | |
| 244 | static struct blockvector *new_bvect (int); |
| 245 | |
| 246 | static struct type *parse_type (int, union aux_ext *, unsigned int, int *, |
| 247 | int, char *); |
| 248 | |
| 249 | static struct symbol *mylookup_symbol (char *, const struct block *, |
| 250 | domain_enum, enum address_class); |
| 251 | |
| 252 | static void sort_blocks (struct symtab *); |
| 253 | |
| 254 | static struct partial_symtab *new_psymtab (char *, struct objfile *); |
| 255 | |
| 256 | static void psymtab_to_symtab_1 (struct objfile *objfile, |
| 257 | struct partial_symtab *, const char *); |
| 258 | |
| 259 | static void add_block (struct block *, struct symtab *); |
| 260 | |
| 261 | static void add_symbol (struct symbol *, struct symtab *, struct block *); |
| 262 | |
| 263 | static int add_line (struct linetable *, int, CORE_ADDR, int); |
| 264 | |
| 265 | static struct linetable *shrink_linetable (struct linetable *); |
| 266 | |
| 267 | static void handle_psymbol_enumerators (struct objfile *, FDR *, int, |
| 268 | CORE_ADDR); |
| 269 | |
| 270 | static char *mdebug_next_symbol_text (struct objfile *); |
| 271 | \f |
| 272 | /* Exported procedure: Builds a symtab from the partial symtab SELF. |
| 273 | Restores the environment in effect when SELF was created, delegates |
| 274 | most of the work to an ancillary procedure, and sorts |
| 275 | and reorders the symtab list at the end. SELF is not NULL. */ |
| 276 | |
| 277 | static void |
| 278 | mdebug_read_symtab (struct partial_symtab *self, struct objfile *objfile) |
| 279 | { |
| 280 | if (info_verbose) |
| 281 | { |
| 282 | printf_filtered (_("Reading in symbols for %s..."), self->filename); |
| 283 | gdb_flush (gdb_stdout); |
| 284 | } |
| 285 | |
| 286 | next_symbol_text_func = mdebug_next_symbol_text; |
| 287 | |
| 288 | psymtab_to_symtab_1 (objfile, self, self->filename); |
| 289 | |
| 290 | /* Match with global symbols. This only needs to be done once, |
| 291 | after all of the symtabs and dependencies have been read in. */ |
| 292 | scan_file_globals (objfile); |
| 293 | |
| 294 | if (info_verbose) |
| 295 | printf_filtered (_("done.\n")); |
| 296 | } |
| 297 | \f |
| 298 | /* File-level interface functions. */ |
| 299 | |
| 300 | /* Find a file descriptor given its index RF relative to a file CF. */ |
| 301 | |
| 302 | static FDR * |
| 303 | get_rfd (int cf, int rf) |
| 304 | { |
| 305 | FDR *fdrs; |
| 306 | FDR *f; |
| 307 | RFDT rfd; |
| 308 | |
| 309 | fdrs = debug_info->fdr; |
| 310 | f = fdrs + cf; |
| 311 | /* Object files do not have the RFD table, all refs are absolute. */ |
| 312 | if (f->rfdBase == 0) |
| 313 | return fdrs + rf; |
| 314 | (*debug_swap->swap_rfd_in) (cur_bfd, |
| 315 | ((char *) debug_info->external_rfd |
| 316 | + ((f->rfdBase + rf) |
| 317 | * debug_swap->external_rfd_size)), |
| 318 | &rfd); |
| 319 | return fdrs + rfd; |
| 320 | } |
| 321 | |
| 322 | /* Return a safer print NAME for a file descriptor. */ |
| 323 | |
| 324 | static char * |
| 325 | fdr_name (FDR *f) |
| 326 | { |
| 327 | if (f->rss == -1) |
| 328 | return "<stripped file>"; |
| 329 | if (f->rss == 0) |
| 330 | return "<NFY>"; |
| 331 | return debug_info->ss + f->issBase + f->rss; |
| 332 | } |
| 333 | |
| 334 | |
| 335 | /* Read in and parse the symtab of the file OBJFILE. Symbols from |
| 336 | different sections are relocated via the SECTION_OFFSETS. */ |
| 337 | |
| 338 | void |
| 339 | mdebug_build_psymtabs (struct objfile *objfile, |
| 340 | const struct ecoff_debug_swap *swap, |
| 341 | struct ecoff_debug_info *info) |
| 342 | { |
| 343 | cur_bfd = objfile->obfd; |
| 344 | debug_swap = swap; |
| 345 | debug_info = info; |
| 346 | |
| 347 | stabsread_new_init (); |
| 348 | buildsym_new_init (); |
| 349 | free_header_files (); |
| 350 | init_header_files (); |
| 351 | |
| 352 | /* Make sure all the FDR information is swapped in. */ |
| 353 | if (info->fdr == (FDR *) NULL) |
| 354 | { |
| 355 | char *fdr_src; |
| 356 | char *fdr_end; |
| 357 | FDR *fdr_ptr; |
| 358 | |
| 359 | info->fdr = (FDR *) obstack_alloc (&objfile->objfile_obstack, |
| 360 | (info->symbolic_header.ifdMax |
| 361 | * sizeof (FDR))); |
| 362 | fdr_src = info->external_fdr; |
| 363 | fdr_end = (fdr_src |
| 364 | + info->symbolic_header.ifdMax * swap->external_fdr_size); |
| 365 | fdr_ptr = info->fdr; |
| 366 | for (; fdr_src < fdr_end; fdr_src += swap->external_fdr_size, fdr_ptr++) |
| 367 | (*swap->swap_fdr_in) (objfile->obfd, fdr_src, fdr_ptr); |
| 368 | } |
| 369 | |
| 370 | parse_partial_symbols (objfile); |
| 371 | |
| 372 | #if 0 |
| 373 | /* Check to make sure file was compiled with -g. If not, warn the |
| 374 | user of this limitation. */ |
| 375 | if (compare_glevel (max_glevel, GLEVEL_2) < 0) |
| 376 | { |
| 377 | if (max_gdbinfo == 0) |
| 378 | printf_unfiltered (_("\n%s not compiled with -g, " |
| 379 | "debugging support is limited.\n"), |
| 380 | objfile->name); |
| 381 | printf_unfiltered (_("You should compile with -g2 or " |
| 382 | "-g3 for best debugging support.\n")); |
| 383 | gdb_flush (gdb_stdout); |
| 384 | } |
| 385 | #endif |
| 386 | } |
| 387 | \f |
| 388 | /* Local utilities */ |
| 389 | |
| 390 | /* Map of FDR indexes to partial symtabs. */ |
| 391 | |
| 392 | struct pst_map |
| 393 | { |
| 394 | struct partial_symtab *pst; /* the psymtab proper */ |
| 395 | long n_globals; /* exported globals (external symbols) */ |
| 396 | long globals_offset; /* cumulative */ |
| 397 | }; |
| 398 | |
| 399 | |
| 400 | /* Utility stack, used to nest procedures and blocks properly. |
| 401 | It is a doubly linked list, to avoid too many alloc/free. |
| 402 | Since we might need it quite a few times it is NOT deallocated |
| 403 | after use. */ |
| 404 | |
| 405 | static struct parse_stack |
| 406 | { |
| 407 | struct parse_stack *next, *prev; |
| 408 | struct symtab *cur_st; /* Current symtab. */ |
| 409 | struct block *cur_block; /* Block in it. */ |
| 410 | |
| 411 | /* What are we parsing. stFile, or stBlock are for files and |
| 412 | blocks. stProc or stStaticProc means we have seen the start of a |
| 413 | procedure, but not the start of the block within in. When we see |
| 414 | the start of that block, we change it to stNil, without pushing a |
| 415 | new block, i.e. stNil means both a procedure and a block. */ |
| 416 | |
| 417 | int blocktype; |
| 418 | |
| 419 | struct type *cur_type; /* Type we parse fields for. */ |
| 420 | int cur_field; /* Field number in cur_type. */ |
| 421 | CORE_ADDR procadr; /* Start addres of this procedure. */ |
| 422 | int numargs; /* Its argument count. */ |
| 423 | } |
| 424 | |
| 425 | *top_stack; /* Top stack ptr */ |
| 426 | |
| 427 | |
| 428 | /* Enter a new lexical context. */ |
| 429 | |
| 430 | static void |
| 431 | push_parse_stack (void) |
| 432 | { |
| 433 | struct parse_stack *newobj; |
| 434 | |
| 435 | /* Reuse frames if possible. */ |
| 436 | if (top_stack && top_stack->prev) |
| 437 | newobj = top_stack->prev; |
| 438 | else |
| 439 | newobj = XCNEW (struct parse_stack); |
| 440 | /* Initialize new frame with previous content. */ |
| 441 | if (top_stack) |
| 442 | { |
| 443 | struct parse_stack *prev = newobj->prev; |
| 444 | |
| 445 | *newobj = *top_stack; |
| 446 | top_stack->prev = newobj; |
| 447 | newobj->prev = prev; |
| 448 | newobj->next = top_stack; |
| 449 | } |
| 450 | top_stack = newobj; |
| 451 | } |
| 452 | |
| 453 | /* Exit a lexical context. */ |
| 454 | |
| 455 | static void |
| 456 | pop_parse_stack (void) |
| 457 | { |
| 458 | if (!top_stack) |
| 459 | return; |
| 460 | if (top_stack->next) |
| 461 | top_stack = top_stack->next; |
| 462 | } |
| 463 | |
| 464 | |
| 465 | /* Cross-references might be to things we haven't looked at |
| 466 | yet, e.g. type references. To avoid too many type |
| 467 | duplications we keep a quick fixup table, an array |
| 468 | of lists of references indexed by file descriptor. */ |
| 469 | |
| 470 | struct mdebug_pending |
| 471 | { |
| 472 | struct mdebug_pending *next; /* link */ |
| 473 | char *s; /* the unswapped symbol */ |
| 474 | struct type *t; /* its partial type descriptor */ |
| 475 | }; |
| 476 | |
| 477 | |
| 478 | /* The pending information is kept for an entire object file. We |
| 479 | allocate the pending information table when we create the partial |
| 480 | symbols, and we store a pointer to the single table in each |
| 481 | psymtab. */ |
| 482 | |
| 483 | static struct mdebug_pending **pending_list; |
| 484 | |
| 485 | /* Check whether we already saw symbol SH in file FH. */ |
| 486 | |
| 487 | static struct mdebug_pending * |
| 488 | is_pending_symbol (FDR *fh, char *sh) |
| 489 | { |
| 490 | int f_idx = fh - debug_info->fdr; |
| 491 | struct mdebug_pending *p; |
| 492 | |
| 493 | /* Linear search is ok, list is typically no more than 10 deep. */ |
| 494 | for (p = pending_list[f_idx]; p; p = p->next) |
| 495 | if (p->s == sh) |
| 496 | break; |
| 497 | return p; |
| 498 | } |
| 499 | |
| 500 | /* Add a new symbol SH of type T. */ |
| 501 | |
| 502 | static void |
| 503 | add_pending (FDR *fh, char *sh, struct type *t) |
| 504 | { |
| 505 | int f_idx = fh - debug_info->fdr; |
| 506 | struct mdebug_pending *p = is_pending_symbol (fh, sh); |
| 507 | |
| 508 | /* Make sure we do not make duplicates. */ |
| 509 | if (!p) |
| 510 | { |
| 511 | p = ((struct mdebug_pending *) |
| 512 | obstack_alloc (&mdebugread_objfile->objfile_obstack, |
| 513 | sizeof (struct mdebug_pending))); |
| 514 | p->s = sh; |
| 515 | p->t = t; |
| 516 | p->next = pending_list[f_idx]; |
| 517 | pending_list[f_idx] = p; |
| 518 | } |
| 519 | } |
| 520 | \f |
| 521 | |
| 522 | /* Parsing Routines proper. */ |
| 523 | |
| 524 | /* Parse a single symbol. Mostly just make up a GDB symbol for it. |
| 525 | For blocks, procedures and types we open a new lexical context. |
| 526 | This is basically just a big switch on the symbol's type. Argument |
| 527 | AX is the base pointer of aux symbols for this file (fh->iauxBase). |
| 528 | EXT_SH points to the unswapped symbol, which is needed for struct, |
| 529 | union, etc., types; it is NULL for an EXTR. BIGEND says whether |
| 530 | aux symbols are big-endian or little-endian. Return count of |
| 531 | SYMR's handled (normally one). */ |
| 532 | |
| 533 | static int |
| 534 | mdebug_reg_to_regnum (struct symbol *sym, struct gdbarch *gdbarch) |
| 535 | { |
| 536 | return gdbarch_ecoff_reg_to_regnum (gdbarch, SYMBOL_VALUE (sym)); |
| 537 | } |
| 538 | |
| 539 | static const struct symbol_register_ops mdebug_register_funcs = { |
| 540 | mdebug_reg_to_regnum |
| 541 | }; |
| 542 | |
| 543 | /* The "aclass" indices for computed symbols. */ |
| 544 | |
| 545 | static int mdebug_register_index; |
| 546 | static int mdebug_regparm_index; |
| 547 | |
| 548 | static int |
| 549 | parse_symbol (SYMR *sh, union aux_ext *ax, char *ext_sh, int bigend, |
| 550 | struct section_offsets *section_offsets, struct objfile *objfile) |
| 551 | { |
| 552 | struct gdbarch *gdbarch = get_objfile_arch (objfile); |
| 553 | const bfd_size_type external_sym_size = debug_swap->external_sym_size; |
| 554 | void (*const swap_sym_in) (bfd *, void *, SYMR *) = debug_swap->swap_sym_in; |
| 555 | char *name; |
| 556 | struct symbol *s; |
| 557 | struct block *b; |
| 558 | struct mdebug_pending *pend; |
| 559 | struct type *t; |
| 560 | struct field *f; |
| 561 | int count = 1; |
| 562 | enum address_class theclass; |
| 563 | TIR tir; |
| 564 | long svalue = sh->value; |
| 565 | int bitsize; |
| 566 | |
| 567 | if (ext_sh == (char *) NULL) |
| 568 | name = debug_info->ssext + sh->iss; |
| 569 | else |
| 570 | name = debug_info->ss + cur_fdr->issBase + sh->iss; |
| 571 | |
| 572 | switch (sh->sc) |
| 573 | { |
| 574 | case scText: |
| 575 | case scRConst: |
| 576 | /* Do not relocate relative values. |
| 577 | The value of a stEnd symbol is the displacement from the |
| 578 | corresponding start symbol value. |
| 579 | The value of a stBlock symbol is the displacement from the |
| 580 | procedure address. */ |
| 581 | if (sh->st != stEnd && sh->st != stBlock) |
| 582 | sh->value += ANOFFSET (section_offsets, SECT_OFF_TEXT (objfile)); |
| 583 | break; |
| 584 | case scData: |
| 585 | case scSData: |
| 586 | case scRData: |
| 587 | case scPData: |
| 588 | case scXData: |
| 589 | sh->value += ANOFFSET (section_offsets, SECT_OFF_DATA (objfile)); |
| 590 | break; |
| 591 | case scBss: |
| 592 | case scSBss: |
| 593 | sh->value += ANOFFSET (section_offsets, SECT_OFF_BSS (objfile)); |
| 594 | break; |
| 595 | } |
| 596 | |
| 597 | switch (sh->st) |
| 598 | { |
| 599 | case stNil: |
| 600 | break; |
| 601 | |
| 602 | case stGlobal: /* External symbol, goes into global block. */ |
| 603 | theclass = LOC_STATIC; |
| 604 | b = BLOCKVECTOR_BLOCK (SYMTAB_BLOCKVECTOR (top_stack->cur_st), |
| 605 | GLOBAL_BLOCK); |
| 606 | s = new_symbol (name); |
| 607 | SYMBOL_VALUE_ADDRESS (s) = (CORE_ADDR) sh->value; |
| 608 | goto data; |
| 609 | |
| 610 | case stStatic: /* Static data, goes into current block. */ |
| 611 | theclass = LOC_STATIC; |
| 612 | b = top_stack->cur_block; |
| 613 | s = new_symbol (name); |
| 614 | if (SC_IS_COMMON (sh->sc)) |
| 615 | { |
| 616 | /* It is a FORTRAN common block. At least for SGI Fortran the |
| 617 | address is not in the symbol; we need to fix it later in |
| 618 | scan_file_globals. */ |
| 619 | int bucket = hashname (SYMBOL_LINKAGE_NAME (s)); |
| 620 | SYMBOL_VALUE_CHAIN (s) = global_sym_chain[bucket]; |
| 621 | global_sym_chain[bucket] = s; |
| 622 | } |
| 623 | else |
| 624 | SYMBOL_VALUE_ADDRESS (s) = (CORE_ADDR) sh->value; |
| 625 | goto data; |
| 626 | |
| 627 | case stLocal: /* Local variable, goes into current block. */ |
| 628 | b = top_stack->cur_block; |
| 629 | s = new_symbol (name); |
| 630 | SYMBOL_VALUE (s) = svalue; |
| 631 | if (sh->sc == scRegister) |
| 632 | theclass = mdebug_register_index; |
| 633 | else |
| 634 | theclass = LOC_LOCAL; |
| 635 | |
| 636 | data: /* Common code for symbols describing data. */ |
| 637 | SYMBOL_DOMAIN (s) = VAR_DOMAIN; |
| 638 | SYMBOL_ACLASS_INDEX (s) = theclass; |
| 639 | add_symbol (s, top_stack->cur_st, b); |
| 640 | |
| 641 | /* Type could be missing if file is compiled without debugging info. */ |
| 642 | if (SC_IS_UNDEF (sh->sc) |
| 643 | || sh->sc == scNil || sh->index == indexNil) |
| 644 | SYMBOL_TYPE (s) = objfile_type (objfile)->nodebug_data_symbol; |
| 645 | else |
| 646 | SYMBOL_TYPE (s) = parse_type (cur_fd, ax, sh->index, 0, bigend, name); |
| 647 | /* Value of a data symbol is its memory address. */ |
| 648 | break; |
| 649 | |
| 650 | case stParam: /* Arg to procedure, goes into current |
| 651 | block. */ |
| 652 | max_gdbinfo++; |
| 653 | found_ecoff_debugging_info = 1; |
| 654 | top_stack->numargs++; |
| 655 | |
| 656 | /* Special GNU C++ name. */ |
| 657 | if (is_cplus_marker (name[0]) && name[1] == 't' && name[2] == 0) |
| 658 | name = "this"; /* FIXME, not alloc'd in obstack. */ |
| 659 | s = new_symbol (name); |
| 660 | |
| 661 | SYMBOL_DOMAIN (s) = VAR_DOMAIN; |
| 662 | SYMBOL_IS_ARGUMENT (s) = 1; |
| 663 | switch (sh->sc) |
| 664 | { |
| 665 | case scRegister: |
| 666 | /* Pass by value in register. */ |
| 667 | SYMBOL_ACLASS_INDEX (s) = mdebug_register_index; |
| 668 | break; |
| 669 | case scVar: |
| 670 | /* Pass by reference on stack. */ |
| 671 | SYMBOL_ACLASS_INDEX (s) = LOC_REF_ARG; |
| 672 | break; |
| 673 | case scVarRegister: |
| 674 | /* Pass by reference in register. */ |
| 675 | SYMBOL_ACLASS_INDEX (s) = mdebug_regparm_index; |
| 676 | break; |
| 677 | default: |
| 678 | /* Pass by value on stack. */ |
| 679 | SYMBOL_ACLASS_INDEX (s) = LOC_ARG; |
| 680 | break; |
| 681 | } |
| 682 | SYMBOL_VALUE (s) = svalue; |
| 683 | SYMBOL_TYPE (s) = parse_type (cur_fd, ax, sh->index, 0, bigend, name); |
| 684 | add_symbol (s, top_stack->cur_st, top_stack->cur_block); |
| 685 | break; |
| 686 | |
| 687 | case stLabel: /* label, goes into current block. */ |
| 688 | s = new_symbol (name); |
| 689 | SYMBOL_DOMAIN (s) = VAR_DOMAIN; /* So that it can be used */ |
| 690 | SYMBOL_ACLASS_INDEX (s) = LOC_LABEL; /* but not misused. */ |
| 691 | SYMBOL_VALUE_ADDRESS (s) = (CORE_ADDR) sh->value; |
| 692 | SYMBOL_TYPE (s) = objfile_type (objfile)->builtin_int; |
| 693 | add_symbol (s, top_stack->cur_st, top_stack->cur_block); |
| 694 | break; |
| 695 | |
| 696 | case stProc: /* Procedure, usually goes into global block. */ |
| 697 | case stStaticProc: /* Static procedure, goes into current block. */ |
| 698 | /* For stProc symbol records, we need to check the storage class |
| 699 | as well, as only (stProc, scText) entries represent "real" |
| 700 | procedures - See the Compaq document titled "Object File / |
| 701 | Symbol Table Format Specification" for more information. |
| 702 | If the storage class is not scText, we discard the whole block |
| 703 | of symbol records for this stProc. */ |
| 704 | if (sh->st == stProc && sh->sc != scText) |
| 705 | { |
| 706 | char *ext_tsym = ext_sh; |
| 707 | int keep_counting = 1; |
| 708 | SYMR tsym; |
| 709 | |
| 710 | while (keep_counting) |
| 711 | { |
| 712 | ext_tsym += external_sym_size; |
| 713 | (*swap_sym_in) (cur_bfd, ext_tsym, &tsym); |
| 714 | count++; |
| 715 | switch (tsym.st) |
| 716 | { |
| 717 | case stParam: |
| 718 | break; |
| 719 | case stEnd: |
| 720 | keep_counting = 0; |
| 721 | break; |
| 722 | default: |
| 723 | complaint (&symfile_complaints, |
| 724 | _("unknown symbol type 0x%x"), sh->st); |
| 725 | break; |
| 726 | } |
| 727 | } |
| 728 | break; |
| 729 | } |
| 730 | s = new_symbol (name); |
| 731 | SYMBOL_DOMAIN (s) = VAR_DOMAIN; |
| 732 | SYMBOL_ACLASS_INDEX (s) = LOC_BLOCK; |
| 733 | /* Type of the return value. */ |
| 734 | if (SC_IS_UNDEF (sh->sc) || sh->sc == scNil) |
| 735 | t = objfile_type (objfile)->builtin_int; |
| 736 | else |
| 737 | { |
| 738 | t = parse_type (cur_fd, ax, sh->index + 1, 0, bigend, name); |
| 739 | if (strcmp (name, "malloc") == 0 |
| 740 | && TYPE_CODE (t) == TYPE_CODE_VOID) |
| 741 | { |
| 742 | /* I don't know why, but, at least under Alpha GNU/Linux, |
| 743 | when linking against a malloc without debugging |
| 744 | symbols, its read as a function returning void---this |
| 745 | is bad because it means we cannot call functions with |
| 746 | string arguments interactively; i.e., "call |
| 747 | printf("howdy\n")" would fail with the error message |
| 748 | "program has no memory available". To avoid this, we |
| 749 | patch up the type and make it void* |
| 750 | instead. (davidm@azstarnet.com). */ |
| 751 | t = make_pointer_type (t, NULL); |
| 752 | } |
| 753 | } |
| 754 | b = top_stack->cur_block; |
| 755 | if (sh->st == stProc) |
| 756 | { |
| 757 | const struct blockvector *bv |
| 758 | = SYMTAB_BLOCKVECTOR (top_stack->cur_st); |
| 759 | |
| 760 | /* The next test should normally be true, but provides a |
| 761 | hook for nested functions (which we don't want to make |
| 762 | global). */ |
| 763 | if (b == BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) |
| 764 | b = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK); |
| 765 | /* Irix 5 sometimes has duplicate names for the same |
| 766 | function. We want to add such names up at the global |
| 767 | level, not as a nested function. */ |
| 768 | else if (sh->value == top_stack->procadr) |
| 769 | b = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK); |
| 770 | } |
| 771 | add_symbol (s, top_stack->cur_st, b); |
| 772 | |
| 773 | /* Make a type for the procedure itself. */ |
| 774 | SYMBOL_TYPE (s) = lookup_function_type (t); |
| 775 | |
| 776 | /* All functions in C++ have prototypes. For C we don't have enough |
| 777 | information in the debug info. */ |
| 778 | if (SYMBOL_LANGUAGE (s) == language_cplus) |
| 779 | TYPE_PROTOTYPED (SYMBOL_TYPE (s)) = 1; |
| 780 | |
| 781 | /* Create and enter a new lexical context. */ |
| 782 | b = new_block (FUNCTION_BLOCK); |
| 783 | SYMBOL_BLOCK_VALUE (s) = b; |
| 784 | BLOCK_FUNCTION (b) = s; |
| 785 | BLOCK_START (b) = BLOCK_END (b) = sh->value; |
| 786 | BLOCK_SUPERBLOCK (b) = top_stack->cur_block; |
| 787 | add_block (b, top_stack->cur_st); |
| 788 | |
| 789 | /* Not if we only have partial info. */ |
| 790 | if (SC_IS_UNDEF (sh->sc) || sh->sc == scNil) |
| 791 | break; |
| 792 | |
| 793 | push_parse_stack (); |
| 794 | top_stack->cur_block = b; |
| 795 | top_stack->blocktype = sh->st; |
| 796 | top_stack->cur_type = SYMBOL_TYPE (s); |
| 797 | top_stack->cur_field = -1; |
| 798 | top_stack->procadr = sh->value; |
| 799 | top_stack->numargs = 0; |
| 800 | break; |
| 801 | |
| 802 | /* Beginning of code for structure, union, and enum definitions. |
| 803 | They all share a common set of local variables, defined here. */ |
| 804 | { |
| 805 | enum type_code type_code; |
| 806 | char *ext_tsym; |
| 807 | int nfields; |
| 808 | long max_value; |
| 809 | struct field *f; |
| 810 | |
| 811 | case stStruct: /* Start a block defining a struct type. */ |
| 812 | type_code = TYPE_CODE_STRUCT; |
| 813 | goto structured_common; |
| 814 | |
| 815 | case stUnion: /* Start a block defining a union type. */ |
| 816 | type_code = TYPE_CODE_UNION; |
| 817 | goto structured_common; |
| 818 | |
| 819 | case stEnum: /* Start a block defining an enum type. */ |
| 820 | type_code = TYPE_CODE_ENUM; |
| 821 | goto structured_common; |
| 822 | |
| 823 | case stBlock: /* Either a lexical block, or some type. */ |
| 824 | if (sh->sc != scInfo && !SC_IS_COMMON (sh->sc)) |
| 825 | goto case_stBlock_code; /* Lexical block */ |
| 826 | |
| 827 | type_code = TYPE_CODE_UNDEF; /* We have a type. */ |
| 828 | |
| 829 | /* Common code for handling struct, union, enum, and/or as-yet- |
| 830 | unknown-type blocks of info about structured data. `type_code' |
| 831 | has been set to the proper TYPE_CODE, if we know it. */ |
| 832 | structured_common: |
| 833 | found_ecoff_debugging_info = 1; |
| 834 | push_parse_stack (); |
| 835 | top_stack->blocktype = stBlock; |
| 836 | |
| 837 | /* First count the number of fields and the highest value. */ |
| 838 | nfields = 0; |
| 839 | max_value = 0; |
| 840 | for (ext_tsym = ext_sh + external_sym_size; |
| 841 | ; |
| 842 | ext_tsym += external_sym_size) |
| 843 | { |
| 844 | SYMR tsym; |
| 845 | |
| 846 | (*swap_sym_in) (cur_bfd, ext_tsym, &tsym); |
| 847 | |
| 848 | switch (tsym.st) |
| 849 | { |
| 850 | case stEnd: |
| 851 | /* C++ encodes class types as structures where there the |
| 852 | methods are encoded as stProc. The scope of stProc |
| 853 | symbols also ends with stEnd, thus creating a risk of |
| 854 | taking the wrong stEnd symbol record as the end of |
| 855 | the current struct, which would cause GDB to undercount |
| 856 | the real number of fields in this struct. To make sure |
| 857 | we really reached the right stEnd symbol record, we |
| 858 | check the associated name, and match it against the |
| 859 | struct name. Since method names are mangled while |
| 860 | the class name is not, there is no risk of having a |
| 861 | method whose name is identical to the class name |
| 862 | (in particular constructor method names are different |
| 863 | from the class name). There is therefore no risk that |
| 864 | this check stops the count on the StEnd of a method. |
| 865 | |
| 866 | Also, assume that we're really at the end when tsym.iss |
| 867 | is 0 (issNull). */ |
| 868 | if (tsym.iss == issNull |
| 869 | || strcmp (debug_info->ss + cur_fdr->issBase + tsym.iss, |
| 870 | name) == 0) |
| 871 | goto end_of_fields; |
| 872 | break; |
| 873 | |
| 874 | case stMember: |
| 875 | if (nfields == 0 && type_code == TYPE_CODE_UNDEF) |
| 876 | { |
| 877 | /* If the type of the member is Nil (or Void), |
| 878 | without qualifiers, assume the tag is an |
| 879 | enumeration. |
| 880 | Alpha cc -migrate enums are recognized by a zero |
| 881 | index and a zero symbol value. |
| 882 | DU 4.0 cc enums are recognized by a member type of |
| 883 | btEnum without qualifiers and a zero symbol value. */ |
| 884 | if (tsym.index == indexNil |
| 885 | || (tsym.index == 0 && sh->value == 0)) |
| 886 | type_code = TYPE_CODE_ENUM; |
| 887 | else |
| 888 | { |
| 889 | (*debug_swap->swap_tir_in) (bigend, |
| 890 | &ax[tsym.index].a_ti, |
| 891 | &tir); |
| 892 | if ((tir.bt == btNil || tir.bt == btVoid |
| 893 | || (tir.bt == btEnum && sh->value == 0)) |
| 894 | && tir.tq0 == tqNil) |
| 895 | type_code = TYPE_CODE_ENUM; |
| 896 | } |
| 897 | } |
| 898 | nfields++; |
| 899 | if (tsym.value > max_value) |
| 900 | max_value = tsym.value; |
| 901 | break; |
| 902 | |
| 903 | case stBlock: |
| 904 | case stUnion: |
| 905 | case stEnum: |
| 906 | case stStruct: |
| 907 | { |
| 908 | #if 0 |
| 909 | /* This is a no-op; is it trying to tell us something |
| 910 | we should be checking? */ |
| 911 | if (tsym.sc == scVariant); /*UNIMPLEMENTED */ |
| 912 | #endif |
| 913 | if (tsym.index != 0) |
| 914 | { |
| 915 | /* This is something like a struct within a |
| 916 | struct. Skip over the fields of the inner |
| 917 | struct. The -1 is because the for loop will |
| 918 | increment ext_tsym. */ |
| 919 | ext_tsym = ((char *) debug_info->external_sym |
| 920 | + ((cur_fdr->isymBase + tsym.index - 1) |
| 921 | * external_sym_size)); |
| 922 | } |
| 923 | } |
| 924 | break; |
| 925 | |
| 926 | case stTypedef: |
| 927 | /* mips cc puts out a typedef for struct x if it is not yet |
| 928 | defined when it encounters |
| 929 | struct y { struct x *xp; }; |
| 930 | Just ignore it. */ |
| 931 | break; |
| 932 | |
| 933 | case stIndirect: |
| 934 | /* Irix5 cc puts out a stIndirect for struct x if it is not |
| 935 | yet defined when it encounters |
| 936 | struct y { struct x *xp; }; |
| 937 | Just ignore it. */ |
| 938 | break; |
| 939 | |
| 940 | default: |
| 941 | complaint (&symfile_complaints, |
| 942 | _("declaration block contains " |
| 943 | "unhandled symbol type %d"), |
| 944 | tsym.st); |
| 945 | } |
| 946 | } |
| 947 | end_of_fields: |
| 948 | |
| 949 | /* In an stBlock, there is no way to distinguish structs, |
| 950 | unions, and enums at this point. This is a bug in the |
| 951 | original design (that has been fixed with the recent |
| 952 | addition of the stStruct, stUnion, and stEnum symbol |
| 953 | types.) The way you can tell is if/when you see a variable |
| 954 | or field of that type. In that case the variable's type |
| 955 | (in the AUX table) says if the type is struct, union, or |
| 956 | enum, and points back to the stBlock here. So you can |
| 957 | patch the tag kind up later - but only if there actually is |
| 958 | a variable or field of that type. |
| 959 | |
| 960 | So until we know for sure, we will guess at this point. |
| 961 | The heuristic is: |
| 962 | If the first member has index==indexNil or a void type, |
| 963 | assume we have an enumeration. |
| 964 | Otherwise, if there is more than one member, and all |
| 965 | the members have offset 0, assume we have a union. |
| 966 | Otherwise, assume we have a struct. |
| 967 | |
| 968 | The heuristic could guess wrong in the case of of an |
| 969 | enumeration with no members or a union with one (or zero) |
| 970 | members, or when all except the last field of a struct have |
| 971 | width zero. These are uncommon and/or illegal situations, |
| 972 | and in any case guessing wrong probably doesn't matter |
| 973 | much. |
| 974 | |
| 975 | But if we later do find out we were wrong, we fixup the tag |
| 976 | kind. Members of an enumeration must be handled |
| 977 | differently from struct/union fields, and that is harder to |
| 978 | patch up, but luckily we shouldn't need to. (If there are |
| 979 | any enumeration members, we can tell for sure it's an enum |
| 980 | here.) */ |
| 981 | |
| 982 | if (type_code == TYPE_CODE_UNDEF) |
| 983 | { |
| 984 | if (nfields > 1 && max_value == 0) |
| 985 | type_code = TYPE_CODE_UNION; |
| 986 | else |
| 987 | type_code = TYPE_CODE_STRUCT; |
| 988 | } |
| 989 | |
| 990 | /* Create a new type or use the pending type. */ |
| 991 | pend = is_pending_symbol (cur_fdr, ext_sh); |
| 992 | if (pend == (struct mdebug_pending *) NULL) |
| 993 | { |
| 994 | t = new_type (NULL); |
| 995 | add_pending (cur_fdr, ext_sh, t); |
| 996 | } |
| 997 | else |
| 998 | t = pend->t; |
| 999 | |
| 1000 | /* Do not set the tag name if it is a compiler generated tag name |
| 1001 | (.Fxx or .xxfake or empty) for unnamed struct/union/enums. |
| 1002 | Alpha cc puts out an sh->iss of zero for those. */ |
| 1003 | if (sh->iss == 0 || name[0] == '.' || name[0] == '\0') |
| 1004 | TYPE_TAG_NAME (t) = NULL; |
| 1005 | else |
| 1006 | TYPE_TAG_NAME (t) = obconcat (&mdebugread_objfile->objfile_obstack, |
| 1007 | name, (char *) NULL); |
| 1008 | |
| 1009 | TYPE_CODE (t) = type_code; |
| 1010 | TYPE_LENGTH (t) = sh->value; |
| 1011 | TYPE_NFIELDS (t) = nfields; |
| 1012 | TYPE_FIELDS (t) = f = ((struct field *) |
| 1013 | TYPE_ALLOC (t, |
| 1014 | nfields * sizeof (struct field))); |
| 1015 | |
| 1016 | if (type_code == TYPE_CODE_ENUM) |
| 1017 | { |
| 1018 | int unsigned_enum = 1; |
| 1019 | |
| 1020 | /* This is a non-empty enum. */ |
| 1021 | |
| 1022 | /* DEC c89 has the number of enumerators in the sh.value field, |
| 1023 | not the type length, so we have to compensate for that |
| 1024 | incompatibility quirk. |
| 1025 | This might do the wrong thing for an enum with one or two |
| 1026 | enumerators and gcc -gcoff -fshort-enums, but these cases |
| 1027 | are hopefully rare enough. |
| 1028 | Alpha cc -migrate has a sh.value field of zero, we adjust |
| 1029 | that too. */ |
| 1030 | if (TYPE_LENGTH (t) == TYPE_NFIELDS (t) |
| 1031 | || TYPE_LENGTH (t) == 0) |
| 1032 | TYPE_LENGTH (t) = gdbarch_int_bit (gdbarch) / HOST_CHAR_BIT; |
| 1033 | for (ext_tsym = ext_sh + external_sym_size; |
| 1034 | ; |
| 1035 | ext_tsym += external_sym_size) |
| 1036 | { |
| 1037 | SYMR tsym; |
| 1038 | struct symbol *enum_sym; |
| 1039 | |
| 1040 | (*swap_sym_in) (cur_bfd, ext_tsym, &tsym); |
| 1041 | |
| 1042 | if (tsym.st != stMember) |
| 1043 | break; |
| 1044 | |
| 1045 | SET_FIELD_ENUMVAL (*f, tsym.value); |
| 1046 | FIELD_TYPE (*f) = t; |
| 1047 | FIELD_NAME (*f) = debug_info->ss + cur_fdr->issBase + tsym.iss; |
| 1048 | FIELD_BITSIZE (*f) = 0; |
| 1049 | |
| 1050 | enum_sym = allocate_symbol (mdebugread_objfile); |
| 1051 | SYMBOL_SET_LINKAGE_NAME |
| 1052 | (enum_sym, |
| 1053 | obstack_copy0 (&mdebugread_objfile->objfile_obstack, |
| 1054 | f->name, strlen (f->name))); |
| 1055 | SYMBOL_ACLASS_INDEX (enum_sym) = LOC_CONST; |
| 1056 | SYMBOL_TYPE (enum_sym) = t; |
| 1057 | SYMBOL_DOMAIN (enum_sym) = VAR_DOMAIN; |
| 1058 | SYMBOL_VALUE (enum_sym) = tsym.value; |
| 1059 | if (SYMBOL_VALUE (enum_sym) < 0) |
| 1060 | unsigned_enum = 0; |
| 1061 | add_symbol (enum_sym, top_stack->cur_st, top_stack->cur_block); |
| 1062 | |
| 1063 | /* Skip the stMembers that we've handled. */ |
| 1064 | count++; |
| 1065 | f++; |
| 1066 | } |
| 1067 | if (unsigned_enum) |
| 1068 | TYPE_UNSIGNED (t) = 1; |
| 1069 | } |
| 1070 | /* Make this the current type. */ |
| 1071 | top_stack->cur_type = t; |
| 1072 | top_stack->cur_field = 0; |
| 1073 | |
| 1074 | /* Do not create a symbol for alpha cc unnamed structs. */ |
| 1075 | if (sh->iss == 0) |
| 1076 | break; |
| 1077 | |
| 1078 | /* gcc puts out an empty struct for an opaque struct definitions, |
| 1079 | do not create a symbol for it either. */ |
| 1080 | if (TYPE_NFIELDS (t) == 0) |
| 1081 | { |
| 1082 | TYPE_STUB (t) = 1; |
| 1083 | break; |
| 1084 | } |
| 1085 | |
| 1086 | s = new_symbol (name); |
| 1087 | SYMBOL_DOMAIN (s) = STRUCT_DOMAIN; |
| 1088 | SYMBOL_ACLASS_INDEX (s) = LOC_TYPEDEF; |
| 1089 | SYMBOL_VALUE (s) = 0; |
| 1090 | SYMBOL_TYPE (s) = t; |
| 1091 | add_symbol (s, top_stack->cur_st, top_stack->cur_block); |
| 1092 | break; |
| 1093 | |
| 1094 | /* End of local variables shared by struct, union, enum, and |
| 1095 | block (as yet unknown struct/union/enum) processing. */ |
| 1096 | } |
| 1097 | |
| 1098 | case_stBlock_code: |
| 1099 | found_ecoff_debugging_info = 1; |
| 1100 | /* Beginnning of (code) block. Value of symbol |
| 1101 | is the displacement from procedure start. */ |
| 1102 | push_parse_stack (); |
| 1103 | |
| 1104 | /* Do not start a new block if this is the outermost block of a |
| 1105 | procedure. This allows the LOC_BLOCK symbol to point to the |
| 1106 | block with the local variables, so funcname::var works. */ |
| 1107 | if (top_stack->blocktype == stProc |
| 1108 | || top_stack->blocktype == stStaticProc) |
| 1109 | { |
| 1110 | top_stack->blocktype = stNil; |
| 1111 | break; |
| 1112 | } |
| 1113 | |
| 1114 | top_stack->blocktype = stBlock; |
| 1115 | b = new_block (NON_FUNCTION_BLOCK); |
| 1116 | BLOCK_START (b) = sh->value + top_stack->procadr; |
| 1117 | BLOCK_SUPERBLOCK (b) = top_stack->cur_block; |
| 1118 | top_stack->cur_block = b; |
| 1119 | add_block (b, top_stack->cur_st); |
| 1120 | break; |
| 1121 | |
| 1122 | case stEnd: /* end (of anything) */ |
| 1123 | if (sh->sc == scInfo || SC_IS_COMMON (sh->sc)) |
| 1124 | { |
| 1125 | /* Finished with type */ |
| 1126 | top_stack->cur_type = 0; |
| 1127 | } |
| 1128 | else if (sh->sc == scText && |
| 1129 | (top_stack->blocktype == stProc || |
| 1130 | top_stack->blocktype == stStaticProc)) |
| 1131 | { |
| 1132 | /* Finished with procedure */ |
| 1133 | const struct blockvector *bv |
| 1134 | = SYMTAB_BLOCKVECTOR (top_stack->cur_st); |
| 1135 | struct mdebug_extra_func_info *e; |
| 1136 | struct block *b = top_stack->cur_block; |
| 1137 | struct type *ftype = top_stack->cur_type; |
| 1138 | int i; |
| 1139 | |
| 1140 | BLOCK_END (top_stack->cur_block) += sh->value; /* size */ |
| 1141 | |
| 1142 | /* Make up special symbol to contain procedure specific info. */ |
| 1143 | s = new_symbol (MDEBUG_EFI_SYMBOL_NAME); |
| 1144 | SYMBOL_DOMAIN (s) = LABEL_DOMAIN; |
| 1145 | SYMBOL_ACLASS_INDEX (s) = LOC_CONST; |
| 1146 | SYMBOL_TYPE (s) = objfile_type (mdebugread_objfile)->builtin_void; |
| 1147 | e = ((struct mdebug_extra_func_info *) |
| 1148 | obstack_alloc (&mdebugread_objfile->objfile_obstack, |
| 1149 | sizeof (struct mdebug_extra_func_info))); |
| 1150 | memset (e, 0, sizeof (struct mdebug_extra_func_info)); |
| 1151 | SYMBOL_VALUE_BYTES (s) = (gdb_byte *) e; |
| 1152 | e->numargs = top_stack->numargs; |
| 1153 | e->pdr.framereg = -1; |
| 1154 | add_symbol (s, top_stack->cur_st, top_stack->cur_block); |
| 1155 | |
| 1156 | /* f77 emits proc-level with address bounds==[0,0], |
| 1157 | So look for such child blocks, and patch them. */ |
| 1158 | for (i = 0; i < BLOCKVECTOR_NBLOCKS (bv); i++) |
| 1159 | { |
| 1160 | struct block *b_bad = BLOCKVECTOR_BLOCK (bv, i); |
| 1161 | |
| 1162 | if (BLOCK_SUPERBLOCK (b_bad) == b |
| 1163 | && BLOCK_START (b_bad) == top_stack->procadr |
| 1164 | && BLOCK_END (b_bad) == top_stack->procadr) |
| 1165 | { |
| 1166 | BLOCK_START (b_bad) = BLOCK_START (b); |
| 1167 | BLOCK_END (b_bad) = BLOCK_END (b); |
| 1168 | } |
| 1169 | } |
| 1170 | |
| 1171 | if (TYPE_NFIELDS (ftype) <= 0) |
| 1172 | { |
| 1173 | /* No parameter type information is recorded with the function's |
| 1174 | type. Set that from the type of the parameter symbols. */ |
| 1175 | int nparams = top_stack->numargs; |
| 1176 | int iparams; |
| 1177 | struct symbol *sym; |
| 1178 | |
| 1179 | if (nparams > 0) |
| 1180 | { |
| 1181 | struct block_iterator iter; |
| 1182 | |
| 1183 | TYPE_NFIELDS (ftype) = nparams; |
| 1184 | TYPE_FIELDS (ftype) = (struct field *) |
| 1185 | TYPE_ALLOC (ftype, nparams * sizeof (struct field)); |
| 1186 | |
| 1187 | iparams = 0; |
| 1188 | ALL_BLOCK_SYMBOLS (b, iter, sym) |
| 1189 | { |
| 1190 | if (iparams == nparams) |
| 1191 | break; |
| 1192 | |
| 1193 | if (SYMBOL_IS_ARGUMENT (sym)) |
| 1194 | { |
| 1195 | TYPE_FIELD_TYPE (ftype, iparams) = SYMBOL_TYPE (sym); |
| 1196 | TYPE_FIELD_ARTIFICIAL (ftype, iparams) = 0; |
| 1197 | iparams++; |
| 1198 | } |
| 1199 | } |
| 1200 | } |
| 1201 | } |
| 1202 | } |
| 1203 | else if (sh->sc == scText && top_stack->blocktype == stBlock) |
| 1204 | { |
| 1205 | /* End of (code) block. The value of the symbol is the |
| 1206 | displacement from the procedure`s start address of the |
| 1207 | end of this block. */ |
| 1208 | BLOCK_END (top_stack->cur_block) = sh->value + top_stack->procadr; |
| 1209 | } |
| 1210 | else if (sh->sc == scText && top_stack->blocktype == stNil) |
| 1211 | { |
| 1212 | /* End of outermost block. Pop parse stack and ignore. The |
| 1213 | following stEnd of stProc will take care of the block. */ |
| 1214 | ; |
| 1215 | } |
| 1216 | else if (sh->sc == scText && top_stack->blocktype == stFile) |
| 1217 | { |
| 1218 | /* End of file. Pop parse stack and ignore. Higher |
| 1219 | level code deals with this. */ |
| 1220 | ; |
| 1221 | } |
| 1222 | else |
| 1223 | complaint (&symfile_complaints, |
| 1224 | _("stEnd with storage class %d not handled"), sh->sc); |
| 1225 | |
| 1226 | pop_parse_stack (); /* Restore previous lexical context. */ |
| 1227 | break; |
| 1228 | |
| 1229 | case stMember: /* member of struct or union */ |
| 1230 | f = &TYPE_FIELDS (top_stack->cur_type)[top_stack->cur_field++]; |
| 1231 | FIELD_NAME (*f) = name; |
| 1232 | SET_FIELD_BITPOS (*f, sh->value); |
| 1233 | bitsize = 0; |
| 1234 | FIELD_TYPE (*f) = parse_type (cur_fd, ax, sh->index, |
| 1235 | &bitsize, bigend, name); |
| 1236 | FIELD_BITSIZE (*f) = bitsize; |
| 1237 | break; |
| 1238 | |
| 1239 | case stIndirect: /* forward declaration on Irix5 */ |
| 1240 | /* Forward declarations from Irix5 cc are handled by cross_ref, |
| 1241 | skip them. */ |
| 1242 | break; |
| 1243 | |
| 1244 | case stTypedef: /* type definition */ |
| 1245 | found_ecoff_debugging_info = 1; |
| 1246 | |
| 1247 | /* Typedefs for forward declarations and opaque structs from alpha cc |
| 1248 | are handled by cross_ref, skip them. */ |
| 1249 | if (sh->iss == 0) |
| 1250 | break; |
| 1251 | |
| 1252 | /* Parse the type or use the pending type. */ |
| 1253 | pend = is_pending_symbol (cur_fdr, ext_sh); |
| 1254 | if (pend == (struct mdebug_pending *) NULL) |
| 1255 | { |
| 1256 | t = parse_type (cur_fd, ax, sh->index, (int *) NULL, bigend, name); |
| 1257 | add_pending (cur_fdr, ext_sh, t); |
| 1258 | } |
| 1259 | else |
| 1260 | t = pend->t; |
| 1261 | |
| 1262 | /* Mips cc puts out a typedef with the name of the struct for forward |
| 1263 | declarations. These should not go into the symbol table and |
| 1264 | TYPE_NAME should not be set for them. |
| 1265 | They can't be distinguished from an intentional typedef to |
| 1266 | the same name however: |
| 1267 | x.h: |
| 1268 | struct x { int ix; int jx; }; |
| 1269 | struct xx; |
| 1270 | x.c: |
| 1271 | typedef struct x x; |
| 1272 | struct xx {int ixx; int jxx; }; |
| 1273 | generates a cross referencing stTypedef for x and xx. |
| 1274 | The user visible effect of this is that the type of a pointer |
| 1275 | to struct foo sometimes is given as `foo *' instead of `struct foo *'. |
| 1276 | The problem is fixed with alpha cc and Irix5 cc. */ |
| 1277 | |
| 1278 | /* However if the typedef cross references to an opaque aggregate, it |
| 1279 | is safe to omit it from the symbol table. */ |
| 1280 | |
| 1281 | if (has_opaque_xref (cur_fdr, sh)) |
| 1282 | break; |
| 1283 | s = new_symbol (name); |
| 1284 | SYMBOL_DOMAIN (s) = VAR_DOMAIN; |
| 1285 | SYMBOL_ACLASS_INDEX (s) = LOC_TYPEDEF; |
| 1286 | SYMBOL_BLOCK_VALUE (s) = top_stack->cur_block; |
| 1287 | SYMBOL_TYPE (s) = t; |
| 1288 | add_symbol (s, top_stack->cur_st, top_stack->cur_block); |
| 1289 | |
| 1290 | /* Incomplete definitions of structs should not get a name. */ |
| 1291 | if (TYPE_NAME (SYMBOL_TYPE (s)) == NULL |
| 1292 | && (TYPE_NFIELDS (SYMBOL_TYPE (s)) != 0 |
| 1293 | || (TYPE_CODE (SYMBOL_TYPE (s)) != TYPE_CODE_STRUCT |
| 1294 | && TYPE_CODE (SYMBOL_TYPE (s)) != TYPE_CODE_UNION))) |
| 1295 | { |
| 1296 | if (TYPE_CODE (SYMBOL_TYPE (s)) == TYPE_CODE_PTR |
| 1297 | || TYPE_CODE (SYMBOL_TYPE (s)) == TYPE_CODE_FUNC) |
| 1298 | { |
| 1299 | /* If we are giving a name to a type such as "pointer to |
| 1300 | foo" or "function returning foo", we better not set |
| 1301 | the TYPE_NAME. If the program contains "typedef char |
| 1302 | *caddr_t;", we don't want all variables of type char |
| 1303 | * to print as caddr_t. This is not just a |
| 1304 | consequence of GDB's type management; CC and GCC (at |
| 1305 | least through version 2.4) both output variables of |
| 1306 | either type char * or caddr_t with the type |
| 1307 | refering to the stTypedef symbol for caddr_t. If a future |
| 1308 | compiler cleans this up it GDB is not ready for it |
| 1309 | yet, but if it becomes ready we somehow need to |
| 1310 | disable this check (without breaking the PCC/GCC2.4 |
| 1311 | case). |
| 1312 | |
| 1313 | Sigh. |
| 1314 | |
| 1315 | Fortunately, this check seems not to be necessary |
| 1316 | for anything except pointers or functions. */ |
| 1317 | } |
| 1318 | else |
| 1319 | TYPE_NAME (SYMBOL_TYPE (s)) = SYMBOL_LINKAGE_NAME (s); |
| 1320 | } |
| 1321 | break; |
| 1322 | |
| 1323 | case stFile: /* file name */ |
| 1324 | push_parse_stack (); |
| 1325 | top_stack->blocktype = sh->st; |
| 1326 | break; |
| 1327 | |
| 1328 | /* I`ve never seen these for C */ |
| 1329 | case stRegReloc: |
| 1330 | break; /* register relocation */ |
| 1331 | case stForward: |
| 1332 | break; /* forwarding address */ |
| 1333 | case stConstant: |
| 1334 | break; /* constant */ |
| 1335 | default: |
| 1336 | complaint (&symfile_complaints, _("unknown symbol type 0x%x"), sh->st); |
| 1337 | break; |
| 1338 | } |
| 1339 | |
| 1340 | return count; |
| 1341 | } |
| 1342 | |
| 1343 | /* Basic types. */ |
| 1344 | |
| 1345 | static const struct objfile_data *basic_type_data; |
| 1346 | |
| 1347 | static struct type * |
| 1348 | basic_type (int bt, struct objfile *objfile) |
| 1349 | { |
| 1350 | struct gdbarch *gdbarch = get_objfile_arch (objfile); |
| 1351 | struct type **map_bt = objfile_data (objfile, basic_type_data); |
| 1352 | struct type *tp; |
| 1353 | |
| 1354 | if (bt >= btMax) |
| 1355 | return NULL; |
| 1356 | |
| 1357 | if (!map_bt) |
| 1358 | { |
| 1359 | map_bt = OBSTACK_CALLOC (&objfile->objfile_obstack, |
| 1360 | btMax, struct type *); |
| 1361 | set_objfile_data (objfile, basic_type_data, map_bt); |
| 1362 | } |
| 1363 | |
| 1364 | if (map_bt[bt]) |
| 1365 | return map_bt[bt]; |
| 1366 | |
| 1367 | switch (bt) |
| 1368 | { |
| 1369 | case btNil: |
| 1370 | tp = objfile_type (objfile)->builtin_void; |
| 1371 | break; |
| 1372 | |
| 1373 | case btAdr: |
| 1374 | tp = init_type (TYPE_CODE_PTR, 4, TYPE_FLAG_UNSIGNED, |
| 1375 | "adr_32", objfile); |
| 1376 | TYPE_TARGET_TYPE (tp) = objfile_type (objfile)->builtin_void; |
| 1377 | break; |
| 1378 | |
| 1379 | case btChar: |
| 1380 | tp = init_type (TYPE_CODE_INT, 1, 0, |
| 1381 | "char", objfile); |
| 1382 | break; |
| 1383 | |
| 1384 | case btUChar: |
| 1385 | tp = init_type (TYPE_CODE_INT, 1, TYPE_FLAG_UNSIGNED, |
| 1386 | "unsigned char", objfile); |
| 1387 | break; |
| 1388 | |
| 1389 | case btShort: |
| 1390 | tp = init_type (TYPE_CODE_INT, 2, 0, |
| 1391 | "short", objfile); |
| 1392 | break; |
| 1393 | |
| 1394 | case btUShort: |
| 1395 | tp = init_type (TYPE_CODE_INT, 2, TYPE_FLAG_UNSIGNED, |
| 1396 | "unsigned short", objfile); |
| 1397 | break; |
| 1398 | |
| 1399 | case btInt: |
| 1400 | tp = init_type (TYPE_CODE_INT, 4, 0, |
| 1401 | "int", objfile); |
| 1402 | break; |
| 1403 | |
| 1404 | case btUInt: |
| 1405 | tp = init_type (TYPE_CODE_INT, 4, TYPE_FLAG_UNSIGNED, |
| 1406 | "unsigned int", objfile); |
| 1407 | break; |
| 1408 | |
| 1409 | case btLong: |
| 1410 | tp = init_type (TYPE_CODE_INT, 4, 0, |
| 1411 | "long", objfile); |
| 1412 | break; |
| 1413 | |
| 1414 | case btULong: |
| 1415 | tp = init_type (TYPE_CODE_INT, 4, TYPE_FLAG_UNSIGNED, |
| 1416 | "unsigned long", objfile); |
| 1417 | break; |
| 1418 | |
| 1419 | case btFloat: |
| 1420 | tp = init_type (TYPE_CODE_FLT, |
| 1421 | gdbarch_float_bit (gdbarch) / TARGET_CHAR_BIT, 0, |
| 1422 | "float", objfile); |
| 1423 | break; |
| 1424 | |
| 1425 | case btDouble: |
| 1426 | tp = init_type (TYPE_CODE_FLT, |
| 1427 | gdbarch_double_bit (gdbarch) / TARGET_CHAR_BIT, 0, |
| 1428 | "double", objfile); |
| 1429 | break; |
| 1430 | |
| 1431 | case btComplex: |
| 1432 | tp = init_type (TYPE_CODE_COMPLEX, |
| 1433 | 2 * gdbarch_float_bit (gdbarch) / TARGET_CHAR_BIT, 0, |
| 1434 | "complex", objfile); |
| 1435 | TYPE_TARGET_TYPE (tp) = basic_type (btFloat, objfile); |
| 1436 | break; |
| 1437 | |
| 1438 | case btDComplex: |
| 1439 | tp = init_type (TYPE_CODE_COMPLEX, |
| 1440 | 2 * gdbarch_double_bit (gdbarch) / TARGET_CHAR_BIT, 0, |
| 1441 | "double complex", objfile); |
| 1442 | TYPE_TARGET_TYPE (tp) = basic_type (btDouble, objfile); |
| 1443 | break; |
| 1444 | |
| 1445 | case btFixedDec: |
| 1446 | /* We use TYPE_CODE_INT to print these as integers. Does this do any |
| 1447 | good? Would we be better off with TYPE_CODE_ERROR? Should |
| 1448 | TYPE_CODE_ERROR print things in hex if it knows the size? */ |
| 1449 | tp = init_type (TYPE_CODE_INT, |
| 1450 | gdbarch_int_bit (gdbarch) / TARGET_CHAR_BIT, 0, |
| 1451 | "fixed decimal", objfile); |
| 1452 | break; |
| 1453 | |
| 1454 | case btFloatDec: |
| 1455 | tp = init_type (TYPE_CODE_ERROR, |
| 1456 | gdbarch_double_bit (gdbarch) / TARGET_CHAR_BIT, 0, |
| 1457 | "floating decimal", objfile); |
| 1458 | break; |
| 1459 | |
| 1460 | case btString: |
| 1461 | /* Is a "string" the way btString means it the same as TYPE_CODE_STRING? |
| 1462 | FIXME. */ |
| 1463 | tp = init_type (TYPE_CODE_STRING, 1, 0, |
| 1464 | "string", objfile); |
| 1465 | break; |
| 1466 | |
| 1467 | case btVoid: |
| 1468 | tp = objfile_type (objfile)->builtin_void; |
| 1469 | break; |
| 1470 | |
| 1471 | case btLong64: |
| 1472 | tp = init_type (TYPE_CODE_INT, 8, 0, |
| 1473 | "long", objfile); |
| 1474 | break; |
| 1475 | |
| 1476 | case btULong64: |
| 1477 | tp = init_type (TYPE_CODE_INT, 8, TYPE_FLAG_UNSIGNED, |
| 1478 | "unsigned long", objfile); |
| 1479 | break; |
| 1480 | |
| 1481 | case btLongLong64: |
| 1482 | tp = init_type (TYPE_CODE_INT, 8, 0, |
| 1483 | "long long", objfile); |
| 1484 | break; |
| 1485 | |
| 1486 | case btULongLong64: |
| 1487 | tp = init_type (TYPE_CODE_INT, 8, TYPE_FLAG_UNSIGNED, |
| 1488 | "unsigned long long", objfile); |
| 1489 | break; |
| 1490 | |
| 1491 | case btAdr64: |
| 1492 | tp = init_type (TYPE_CODE_PTR, 8, TYPE_FLAG_UNSIGNED, |
| 1493 | "adr_64", objfile); |
| 1494 | TYPE_TARGET_TYPE (tp) = objfile_type (objfile)->builtin_void; |
| 1495 | break; |
| 1496 | |
| 1497 | case btInt64: |
| 1498 | tp = init_type (TYPE_CODE_INT, 8, 0, |
| 1499 | "int", objfile); |
| 1500 | break; |
| 1501 | |
| 1502 | case btUInt64: |
| 1503 | tp = init_type (TYPE_CODE_INT, 8, TYPE_FLAG_UNSIGNED, |
| 1504 | "unsigned int", objfile); |
| 1505 | break; |
| 1506 | |
| 1507 | default: |
| 1508 | tp = NULL; |
| 1509 | break; |
| 1510 | } |
| 1511 | |
| 1512 | map_bt[bt] = tp; |
| 1513 | return tp; |
| 1514 | } |
| 1515 | |
| 1516 | /* Parse the type information provided in the raw AX entries for |
| 1517 | the symbol SH. Return the bitfield size in BS, in case. |
| 1518 | We must byte-swap the AX entries before we use them; BIGEND says whether |
| 1519 | they are big-endian or little-endian (from fh->fBigendian). */ |
| 1520 | |
| 1521 | static struct type * |
| 1522 | parse_type (int fd, union aux_ext *ax, unsigned int aux_index, int *bs, |
| 1523 | int bigend, char *sym_name) |
| 1524 | { |
| 1525 | TIR t[1]; |
| 1526 | struct type *tp = 0; |
| 1527 | enum type_code type_code = TYPE_CODE_UNDEF; |
| 1528 | |
| 1529 | /* Handle undefined types, they have indexNil. */ |
| 1530 | if (aux_index == indexNil) |
| 1531 | return basic_type (btInt, mdebugread_objfile); |
| 1532 | |
| 1533 | /* Handle corrupt aux indices. */ |
| 1534 | if (aux_index >= (debug_info->fdr + fd)->caux) |
| 1535 | { |
| 1536 | index_complaint (sym_name); |
| 1537 | return basic_type (btInt, mdebugread_objfile); |
| 1538 | } |
| 1539 | ax += aux_index; |
| 1540 | |
| 1541 | /* Use aux as a type information record, map its basic type. */ |
| 1542 | (*debug_swap->swap_tir_in) (bigend, &ax->a_ti, t); |
| 1543 | tp = basic_type (t->bt, mdebugread_objfile); |
| 1544 | if (tp == NULL) |
| 1545 | { |
| 1546 | /* Cannot use builtin types -- build our own. */ |
| 1547 | switch (t->bt) |
| 1548 | { |
| 1549 | case btStruct: |
| 1550 | type_code = TYPE_CODE_STRUCT; |
| 1551 | break; |
| 1552 | case btUnion: |
| 1553 | type_code = TYPE_CODE_UNION; |
| 1554 | break; |
| 1555 | case btEnum: |
| 1556 | type_code = TYPE_CODE_ENUM; |
| 1557 | break; |
| 1558 | case btRange: |
| 1559 | type_code = TYPE_CODE_RANGE; |
| 1560 | break; |
| 1561 | case btSet: |
| 1562 | type_code = TYPE_CODE_SET; |
| 1563 | break; |
| 1564 | case btIndirect: |
| 1565 | /* alpha cc -migrate uses this for typedefs. The true type will |
| 1566 | be obtained by crossreferencing below. */ |
| 1567 | type_code = TYPE_CODE_ERROR; |
| 1568 | break; |
| 1569 | case btTypedef: |
| 1570 | /* alpha cc uses this for typedefs. The true type will be |
| 1571 | obtained by crossreferencing below. */ |
| 1572 | type_code = TYPE_CODE_ERROR; |
| 1573 | break; |
| 1574 | default: |
| 1575 | basic_type_complaint (t->bt, sym_name); |
| 1576 | return basic_type (btInt, mdebugread_objfile); |
| 1577 | } |
| 1578 | } |
| 1579 | |
| 1580 | /* Move on to next aux. */ |
| 1581 | ax++; |
| 1582 | |
| 1583 | if (t->fBitfield) |
| 1584 | { |
| 1585 | int width = AUX_GET_WIDTH (bigend, ax); |
| 1586 | |
| 1587 | /* Inhibit core dumps if TIR is corrupted. */ |
| 1588 | if (bs == (int *) NULL) |
| 1589 | { |
| 1590 | /* Alpha cc -migrate encodes char and unsigned char types |
| 1591 | as short and unsigned short types with a field width of 8. |
| 1592 | Enum types also have a field width which we ignore for now. */ |
| 1593 | if (t->bt == btShort && width == 8) |
| 1594 | tp = basic_type (btChar, mdebugread_objfile); |
| 1595 | else if (t->bt == btUShort && width == 8) |
| 1596 | tp = basic_type (btUChar, mdebugread_objfile); |
| 1597 | else if (t->bt == btEnum) |
| 1598 | ; |
| 1599 | else |
| 1600 | complaint (&symfile_complaints, |
| 1601 | _("can't handle TIR fBitfield for %s"), |
| 1602 | sym_name); |
| 1603 | } |
| 1604 | else |
| 1605 | *bs = width; |
| 1606 | ax++; |
| 1607 | } |
| 1608 | |
| 1609 | /* A btIndirect entry cross references to an aux entry containing |
| 1610 | the type. */ |
| 1611 | if (t->bt == btIndirect) |
| 1612 | { |
| 1613 | RNDXR rn[1]; |
| 1614 | int rf; |
| 1615 | FDR *xref_fh; |
| 1616 | int xref_fd; |
| 1617 | |
| 1618 | (*debug_swap->swap_rndx_in) (bigend, &ax->a_rndx, rn); |
| 1619 | ax++; |
| 1620 | if (rn->rfd == 0xfff) |
| 1621 | { |
| 1622 | rf = AUX_GET_ISYM (bigend, ax); |
| 1623 | ax++; |
| 1624 | } |
| 1625 | else |
| 1626 | rf = rn->rfd; |
| 1627 | |
| 1628 | if (rf == -1) |
| 1629 | { |
| 1630 | complaint (&symfile_complaints, |
| 1631 | _("unable to cross ref btIndirect for %s"), sym_name); |
| 1632 | return basic_type (btInt, mdebugread_objfile); |
| 1633 | } |
| 1634 | xref_fh = get_rfd (fd, rf); |
| 1635 | xref_fd = xref_fh - debug_info->fdr; |
| 1636 | tp = parse_type (xref_fd, debug_info->external_aux + xref_fh->iauxBase, |
| 1637 | rn->index, (int *) NULL, xref_fh->fBigendian, sym_name); |
| 1638 | } |
| 1639 | |
| 1640 | /* All these types really point to some (common) MIPS type |
| 1641 | definition, and only the type-qualifiers fully identify |
| 1642 | them. We'll make the same effort at sharing. */ |
| 1643 | if (t->bt == btStruct || |
| 1644 | t->bt == btUnion || |
| 1645 | t->bt == btEnum || |
| 1646 | |
| 1647 | /* btSet (I think) implies that the name is a tag name, not a typedef |
| 1648 | name. This apparently is a MIPS extension for C sets. */ |
| 1649 | t->bt == btSet) |
| 1650 | { |
| 1651 | char *name; |
| 1652 | |
| 1653 | /* Try to cross reference this type, build new type on failure. */ |
| 1654 | ax += cross_ref (fd, ax, &tp, type_code, &name, bigend, sym_name); |
| 1655 | if (tp == (struct type *) NULL) |
| 1656 | tp = init_type (type_code, 0, 0, (char *) NULL, mdebugread_objfile); |
| 1657 | |
| 1658 | /* DEC c89 produces cross references to qualified aggregate types, |
| 1659 | dereference them. */ |
| 1660 | while (TYPE_CODE (tp) == TYPE_CODE_PTR |
| 1661 | || TYPE_CODE (tp) == TYPE_CODE_ARRAY) |
| 1662 | tp = TYPE_TARGET_TYPE (tp); |
| 1663 | |
| 1664 | /* Make sure that TYPE_CODE(tp) has an expected type code. |
| 1665 | Any type may be returned from cross_ref if file indirect entries |
| 1666 | are corrupted. */ |
| 1667 | if (TYPE_CODE (tp) != TYPE_CODE_STRUCT |
| 1668 | && TYPE_CODE (tp) != TYPE_CODE_UNION |
| 1669 | && TYPE_CODE (tp) != TYPE_CODE_ENUM) |
| 1670 | { |
| 1671 | unexpected_type_code_complaint (sym_name); |
| 1672 | } |
| 1673 | else |
| 1674 | { |
| 1675 | /* Usually, TYPE_CODE(tp) is already type_code. The main |
| 1676 | exception is if we guessed wrong re struct/union/enum. |
| 1677 | But for struct vs. union a wrong guess is harmless, so |
| 1678 | don't complain(). */ |
| 1679 | if ((TYPE_CODE (tp) == TYPE_CODE_ENUM |
| 1680 | && type_code != TYPE_CODE_ENUM) |
| 1681 | || (TYPE_CODE (tp) != TYPE_CODE_ENUM |
| 1682 | && type_code == TYPE_CODE_ENUM)) |
| 1683 | { |
| 1684 | bad_tag_guess_complaint (sym_name); |
| 1685 | } |
| 1686 | |
| 1687 | if (TYPE_CODE (tp) != type_code) |
| 1688 | { |
| 1689 | TYPE_CODE (tp) = type_code; |
| 1690 | } |
| 1691 | |
| 1692 | /* Do not set the tag name if it is a compiler generated tag name |
| 1693 | (.Fxx or .xxfake or empty) for unnamed struct/union/enums. */ |
| 1694 | if (name[0] == '.' || name[0] == '\0') |
| 1695 | TYPE_TAG_NAME (tp) = NULL; |
| 1696 | else if (TYPE_TAG_NAME (tp) == NULL |
| 1697 | || strcmp (TYPE_TAG_NAME (tp), name) != 0) |
| 1698 | TYPE_TAG_NAME (tp) |
| 1699 | = obstack_copy0 (&mdebugread_objfile->objfile_obstack, |
| 1700 | name, strlen (name)); |
| 1701 | } |
| 1702 | } |
| 1703 | |
| 1704 | /* All these types really point to some (common) MIPS type |
| 1705 | definition, and only the type-qualifiers fully identify |
| 1706 | them. We'll make the same effort at sharing. |
| 1707 | FIXME: We are not doing any guessing on range types. */ |
| 1708 | if (t->bt == btRange) |
| 1709 | { |
| 1710 | char *name; |
| 1711 | |
| 1712 | /* Try to cross reference this type, build new type on failure. */ |
| 1713 | ax += cross_ref (fd, ax, &tp, type_code, &name, bigend, sym_name); |
| 1714 | if (tp == (struct type *) NULL) |
| 1715 | tp = init_type (type_code, 0, 0, (char *) NULL, mdebugread_objfile); |
| 1716 | |
| 1717 | /* Make sure that TYPE_CODE(tp) has an expected type code. |
| 1718 | Any type may be returned from cross_ref if file indirect entries |
| 1719 | are corrupted. */ |
| 1720 | if (TYPE_CODE (tp) != TYPE_CODE_RANGE) |
| 1721 | { |
| 1722 | unexpected_type_code_complaint (sym_name); |
| 1723 | } |
| 1724 | else |
| 1725 | { |
| 1726 | /* Usually, TYPE_CODE(tp) is already type_code. The main |
| 1727 | exception is if we guessed wrong re struct/union/enum. */ |
| 1728 | if (TYPE_CODE (tp) != type_code) |
| 1729 | { |
| 1730 | bad_tag_guess_complaint (sym_name); |
| 1731 | TYPE_CODE (tp) = type_code; |
| 1732 | } |
| 1733 | if (TYPE_NAME (tp) == NULL |
| 1734 | || strcmp (TYPE_NAME (tp), name) != 0) |
| 1735 | TYPE_NAME (tp) |
| 1736 | = obstack_copy0 (&mdebugread_objfile->objfile_obstack, |
| 1737 | name, strlen (name)); |
| 1738 | } |
| 1739 | } |
| 1740 | if (t->bt == btTypedef) |
| 1741 | { |
| 1742 | char *name; |
| 1743 | |
| 1744 | /* Try to cross reference this type, it should succeed. */ |
| 1745 | ax += cross_ref (fd, ax, &tp, type_code, &name, bigend, sym_name); |
| 1746 | if (tp == (struct type *) NULL) |
| 1747 | { |
| 1748 | complaint (&symfile_complaints, |
| 1749 | _("unable to cross ref btTypedef for %s"), sym_name); |
| 1750 | tp = basic_type (btInt, mdebugread_objfile); |
| 1751 | } |
| 1752 | } |
| 1753 | |
| 1754 | /* Deal with range types. */ |
| 1755 | if (t->bt == btRange) |
| 1756 | { |
| 1757 | TYPE_NFIELDS (tp) = 0; |
| 1758 | TYPE_RANGE_DATA (tp) = ((struct range_bounds *) |
| 1759 | TYPE_ZALLOC (tp, sizeof (struct range_bounds))); |
| 1760 | TYPE_LOW_BOUND (tp) = AUX_GET_DNLOW (bigend, ax); |
| 1761 | ax++; |
| 1762 | TYPE_HIGH_BOUND (tp) = AUX_GET_DNHIGH (bigend, ax); |
| 1763 | ax++; |
| 1764 | } |
| 1765 | |
| 1766 | /* Parse all the type qualifiers now. If there are more |
| 1767 | than 6 the game will continue in the next aux. */ |
| 1768 | |
| 1769 | while (1) |
| 1770 | { |
| 1771 | #define PARSE_TQ(tq) \ |
| 1772 | if (t->tq != tqNil) \ |
| 1773 | ax += upgrade_type(fd, &tp, t->tq, ax, bigend, sym_name); \ |
| 1774 | else \ |
| 1775 | break; |
| 1776 | |
| 1777 | PARSE_TQ (tq0); |
| 1778 | PARSE_TQ (tq1); |
| 1779 | PARSE_TQ (tq2); |
| 1780 | PARSE_TQ (tq3); |
| 1781 | PARSE_TQ (tq4); |
| 1782 | PARSE_TQ (tq5); |
| 1783 | #undef PARSE_TQ |
| 1784 | |
| 1785 | /* mips cc 2.x and gcc never put out continued aux entries. */ |
| 1786 | if (!t->continued) |
| 1787 | break; |
| 1788 | |
| 1789 | (*debug_swap->swap_tir_in) (bigend, &ax->a_ti, t); |
| 1790 | ax++; |
| 1791 | } |
| 1792 | |
| 1793 | /* Complain for illegal continuations due to corrupt aux entries. */ |
| 1794 | if (t->continued) |
| 1795 | complaint (&symfile_complaints, |
| 1796 | _("illegal TIR continued for %s"), sym_name); |
| 1797 | |
| 1798 | return tp; |
| 1799 | } |
| 1800 | |
| 1801 | /* Make up a complex type from a basic one. Type is passed by |
| 1802 | reference in TPP and side-effected as necessary. The type |
| 1803 | qualifier TQ says how to handle the aux symbols at AX for |
| 1804 | the symbol SX we are currently analyzing. BIGEND says whether |
| 1805 | aux symbols are big-endian or little-endian. |
| 1806 | Returns the number of aux symbols we parsed. */ |
| 1807 | |
| 1808 | static int |
| 1809 | upgrade_type (int fd, struct type **tpp, int tq, union aux_ext *ax, int bigend, |
| 1810 | char *sym_name) |
| 1811 | { |
| 1812 | int off; |
| 1813 | struct type *t; |
| 1814 | |
| 1815 | /* Used in array processing. */ |
| 1816 | int rf, id; |
| 1817 | FDR *fh; |
| 1818 | struct type *range; |
| 1819 | struct type *indx; |
| 1820 | int lower, upper; |
| 1821 | RNDXR rndx; |
| 1822 | |
| 1823 | switch (tq) |
| 1824 | { |
| 1825 | case tqPtr: |
| 1826 | t = lookup_pointer_type (*tpp); |
| 1827 | *tpp = t; |
| 1828 | return 0; |
| 1829 | |
| 1830 | case tqProc: |
| 1831 | t = lookup_function_type (*tpp); |
| 1832 | *tpp = t; |
| 1833 | return 0; |
| 1834 | |
| 1835 | case tqArray: |
| 1836 | off = 0; |
| 1837 | |
| 1838 | /* Determine and record the domain type (type of index). */ |
| 1839 | (*debug_swap->swap_rndx_in) (bigend, &ax->a_rndx, &rndx); |
| 1840 | id = rndx.index; |
| 1841 | rf = rndx.rfd; |
| 1842 | if (rf == 0xfff) |
| 1843 | { |
| 1844 | ax++; |
| 1845 | rf = AUX_GET_ISYM (bigend, ax); |
| 1846 | off++; |
| 1847 | } |
| 1848 | fh = get_rfd (fd, rf); |
| 1849 | |
| 1850 | indx = parse_type (fh - debug_info->fdr, |
| 1851 | debug_info->external_aux + fh->iauxBase, |
| 1852 | id, (int *) NULL, bigend, sym_name); |
| 1853 | |
| 1854 | /* The bounds type should be an integer type, but might be anything |
| 1855 | else due to corrupt aux entries. */ |
| 1856 | if (TYPE_CODE (indx) != TYPE_CODE_INT) |
| 1857 | { |
| 1858 | complaint (&symfile_complaints, |
| 1859 | _("illegal array index type for %s, assuming int"), |
| 1860 | sym_name); |
| 1861 | indx = objfile_type (mdebugread_objfile)->builtin_int; |
| 1862 | } |
| 1863 | |
| 1864 | /* Get the bounds, and create the array type. */ |
| 1865 | ax++; |
| 1866 | lower = AUX_GET_DNLOW (bigend, ax); |
| 1867 | ax++; |
| 1868 | upper = AUX_GET_DNHIGH (bigend, ax); |
| 1869 | ax++; |
| 1870 | rf = AUX_GET_WIDTH (bigend, ax); /* bit size of array element */ |
| 1871 | |
| 1872 | range = create_static_range_type ((struct type *) NULL, indx, |
| 1873 | lower, upper); |
| 1874 | |
| 1875 | t = create_array_type ((struct type *) NULL, *tpp, range); |
| 1876 | |
| 1877 | /* We used to fill in the supplied array element bitsize |
| 1878 | here if the TYPE_LENGTH of the target type was zero. |
| 1879 | This happens for a `pointer to an array of anonymous structs', |
| 1880 | but in this case the array element bitsize is also zero, |
| 1881 | so nothing is gained. |
| 1882 | And we used to check the TYPE_LENGTH of the target type against |
| 1883 | the supplied array element bitsize. |
| 1884 | gcc causes a mismatch for `pointer to array of object', |
| 1885 | since the sdb directives it uses do not have a way of |
| 1886 | specifying the bitsize, but it does no harm (the |
| 1887 | TYPE_LENGTH should be correct) and we should be able to |
| 1888 | ignore the erroneous bitsize from the auxiliary entry safely. |
| 1889 | dbx seems to ignore it too. */ |
| 1890 | |
| 1891 | /* TYPE_TARGET_STUB now takes care of the zero TYPE_LENGTH problem. */ |
| 1892 | if (TYPE_LENGTH (*tpp) == 0) |
| 1893 | TYPE_TARGET_STUB (t) = 1; |
| 1894 | |
| 1895 | *tpp = t; |
| 1896 | return 4 + off; |
| 1897 | |
| 1898 | case tqVol: |
| 1899 | /* Volatile -- currently ignored */ |
| 1900 | return 0; |
| 1901 | |
| 1902 | case tqConst: |
| 1903 | /* Const -- currently ignored */ |
| 1904 | return 0; |
| 1905 | |
| 1906 | default: |
| 1907 | complaint (&symfile_complaints, _("unknown type qualifier 0x%x"), tq); |
| 1908 | return 0; |
| 1909 | } |
| 1910 | } |
| 1911 | |
| 1912 | |
| 1913 | /* Parse a procedure descriptor record PR. Note that the procedure is |
| 1914 | parsed _after_ the local symbols, now we just insert the extra |
| 1915 | information we need into a MDEBUG_EFI_SYMBOL_NAME symbol that has |
| 1916 | already been placed in the procedure's main block. Note also that |
| 1917 | images that have been partially stripped (ld -x) have been deprived |
| 1918 | of local symbols, and we have to cope with them here. FIRST_OFF is |
| 1919 | the offset of the first procedure for this FDR; we adjust the |
| 1920 | address by this amount, but I don't know why. SEARCH_SYMTAB is the symtab |
| 1921 | to look for the function which contains the MDEBUG_EFI_SYMBOL_NAME symbol |
| 1922 | in question, or NULL to use top_stack->cur_block. */ |
| 1923 | |
| 1924 | static void |
| 1925 | parse_procedure (PDR *pr, struct compunit_symtab *search_symtab, |
| 1926 | struct partial_symtab *pst) |
| 1927 | { |
| 1928 | struct symbol *s, *i; |
| 1929 | const struct block *b; |
| 1930 | char *sh_name; |
| 1931 | |
| 1932 | /* Simple rule to find files linked "-x". */ |
| 1933 | if (cur_fdr->rss == -1) |
| 1934 | { |
| 1935 | if (pr->isym == -1) |
| 1936 | { |
| 1937 | /* Static procedure at address pr->adr. Sigh. */ |
| 1938 | /* FIXME-32x64. assuming pr->adr fits in long. */ |
| 1939 | complaint (&symfile_complaints, |
| 1940 | _("can't handle PDR for static proc at 0x%lx"), |
| 1941 | (unsigned long) pr->adr); |
| 1942 | return; |
| 1943 | } |
| 1944 | else |
| 1945 | { |
| 1946 | /* external */ |
| 1947 | EXTR she; |
| 1948 | |
| 1949 | (*debug_swap->swap_ext_in) (cur_bfd, |
| 1950 | ((char *) debug_info->external_ext |
| 1951 | + (pr->isym |
| 1952 | * debug_swap->external_ext_size)), |
| 1953 | &she); |
| 1954 | sh_name = debug_info->ssext + she.asym.iss; |
| 1955 | } |
| 1956 | } |
| 1957 | else |
| 1958 | { |
| 1959 | /* Full symbols */ |
| 1960 | SYMR sh; |
| 1961 | |
| 1962 | (*debug_swap->swap_sym_in) (cur_bfd, |
| 1963 | ((char *) debug_info->external_sym |
| 1964 | + ((cur_fdr->isymBase + pr->isym) |
| 1965 | * debug_swap->external_sym_size)), |
| 1966 | &sh); |
| 1967 | sh_name = debug_info->ss + cur_fdr->issBase + sh.iss; |
| 1968 | } |
| 1969 | |
| 1970 | if (search_symtab != NULL) |
| 1971 | { |
| 1972 | #if 0 |
| 1973 | /* This loses both in the case mentioned (want a static, find a global), |
| 1974 | but also if we are looking up a non-mangled name which happens to |
| 1975 | match the name of a mangled function. */ |
| 1976 | /* We have to save the cur_fdr across the call to lookup_symbol. |
| 1977 | If the pdr is for a static function and if a global function with |
| 1978 | the same name exists, lookup_symbol will eventually read in the symtab |
| 1979 | for the global function and clobber cur_fdr. */ |
| 1980 | FDR *save_cur_fdr = cur_fdr; |
| 1981 | |
| 1982 | s = lookup_symbol (sh_name, NULL, VAR_DOMAIN, 0); |
| 1983 | cur_fdr = save_cur_fdr; |
| 1984 | #else |
| 1985 | s = mylookup_symbol |
| 1986 | (sh_name, |
| 1987 | BLOCKVECTOR_BLOCK (COMPUNIT_BLOCKVECTOR (search_symtab), |
| 1988 | STATIC_BLOCK), |
| 1989 | VAR_DOMAIN, |
| 1990 | LOC_BLOCK); |
| 1991 | #endif |
| 1992 | } |
| 1993 | else |
| 1994 | s = mylookup_symbol (sh_name, top_stack->cur_block, |
| 1995 | VAR_DOMAIN, LOC_BLOCK); |
| 1996 | |
| 1997 | if (s != 0) |
| 1998 | { |
| 1999 | b = SYMBOL_BLOCK_VALUE (s); |
| 2000 | } |
| 2001 | else |
| 2002 | { |
| 2003 | complaint (&symfile_complaints, _("PDR for %s, but no symbol"), sh_name); |
| 2004 | #if 1 |
| 2005 | return; |
| 2006 | #else |
| 2007 | /* FIXME -- delete. We can't do symbol allocation now; it's all done. */ |
| 2008 | s = new_symbol (sh_name); |
| 2009 | SYMBOL_DOMAIN (s) = VAR_DOMAIN; |
| 2010 | SYMBOL_CLASS (s) = LOC_BLOCK; |
| 2011 | /* Donno its type, hope int is ok. */ |
| 2012 | SYMBOL_TYPE (s) |
| 2013 | = lookup_function_type (objfile_type (pst->objfile)->builtin_int); |
| 2014 | add_symbol (s, top_stack->cur_st, top_stack->cur_block); |
| 2015 | /* Won't have symbols for this one. */ |
| 2016 | b = new_block (2); |
| 2017 | SYMBOL_BLOCK_VALUE (s) = b; |
| 2018 | BLOCK_FUNCTION (b) = s; |
| 2019 | BLOCK_START (b) = pr->adr; |
| 2020 | /* BOUND used to be the end of procedure's text, but the |
| 2021 | argument is no longer passed in. */ |
| 2022 | BLOCK_END (b) = bound; |
| 2023 | BLOCK_SUPERBLOCK (b) = top_stack->cur_block; |
| 2024 | add_block (b, top_stack->cur_st); |
| 2025 | #endif |
| 2026 | } |
| 2027 | |
| 2028 | i = mylookup_symbol (MDEBUG_EFI_SYMBOL_NAME, b, LABEL_DOMAIN, LOC_CONST); |
| 2029 | |
| 2030 | if (i) |
| 2031 | { |
| 2032 | struct mdebug_extra_func_info *e; |
| 2033 | |
| 2034 | e = (struct mdebug_extra_func_info *) SYMBOL_VALUE_BYTES (i); |
| 2035 | e->pdr = *pr; |
| 2036 | |
| 2037 | /* GDB expects the absolute function start address for the |
| 2038 | procedure descriptor in e->pdr.adr. |
| 2039 | As the address in the procedure descriptor is usually relative, |
| 2040 | we would have to relocate e->pdr.adr with cur_fdr->adr and |
| 2041 | ANOFFSET (pst->section_offsets, SECT_OFF_TEXT (pst->objfile)). |
| 2042 | Unfortunately cur_fdr->adr and e->pdr.adr are both absolute |
| 2043 | in shared libraries on some systems, and on other systems |
| 2044 | e->pdr.adr is sometimes offset by a bogus value. |
| 2045 | To work around these problems, we replace e->pdr.adr with |
| 2046 | the start address of the function. */ |
| 2047 | e->pdr.adr = BLOCK_START (b); |
| 2048 | } |
| 2049 | |
| 2050 | /* It would be reasonable that functions that have been compiled |
| 2051 | without debugging info have a btNil type for their return value, |
| 2052 | and functions that are void and are compiled with debugging info |
| 2053 | have btVoid. |
| 2054 | gcc and DEC f77 put out btNil types for both cases, so btNil is mapped |
| 2055 | to TYPE_CODE_VOID in parse_type to get the `compiled with debugging info' |
| 2056 | case right. |
| 2057 | The glevel field in cur_fdr could be used to determine the presence |
| 2058 | of debugging info, but GCC doesn't always pass the -g switch settings |
| 2059 | to the assembler and GAS doesn't set the glevel field from the -g switch |
| 2060 | settings. |
| 2061 | To work around these problems, the return value type of a TYPE_CODE_VOID |
| 2062 | function is adjusted accordingly if no debugging info was found in the |
| 2063 | compilation unit. */ |
| 2064 | |
| 2065 | if (processing_gcc_compilation == 0 |
| 2066 | && found_ecoff_debugging_info == 0 |
| 2067 | && TYPE_CODE (TYPE_TARGET_TYPE (SYMBOL_TYPE (s))) == TYPE_CODE_VOID) |
| 2068 | SYMBOL_TYPE (s) = objfile_type (mdebugread_objfile)->nodebug_text_symbol; |
| 2069 | } |
| 2070 | |
| 2071 | /* Parse the external symbol ES. Just call parse_symbol() after |
| 2072 | making sure we know where the aux are for it. |
| 2073 | BIGEND says whether aux entries are big-endian or little-endian. |
| 2074 | |
| 2075 | This routine clobbers top_stack->cur_block and ->cur_st. */ |
| 2076 | |
| 2077 | static void parse_external (EXTR *, int, struct section_offsets *, |
| 2078 | struct objfile *); |
| 2079 | |
| 2080 | static void |
| 2081 | parse_external (EXTR *es, int bigend, struct section_offsets *section_offsets, |
| 2082 | struct objfile *objfile) |
| 2083 | { |
| 2084 | union aux_ext *ax; |
| 2085 | |
| 2086 | if (es->ifd != ifdNil) |
| 2087 | { |
| 2088 | cur_fd = es->ifd; |
| 2089 | cur_fdr = debug_info->fdr + cur_fd; |
| 2090 | ax = debug_info->external_aux + cur_fdr->iauxBase; |
| 2091 | } |
| 2092 | else |
| 2093 | { |
| 2094 | cur_fdr = debug_info->fdr; |
| 2095 | ax = 0; |
| 2096 | } |
| 2097 | |
| 2098 | /* Reading .o files */ |
| 2099 | if (SC_IS_UNDEF (es->asym.sc) || es->asym.sc == scNil) |
| 2100 | { |
| 2101 | char *what; |
| 2102 | switch (es->asym.st) |
| 2103 | { |
| 2104 | case stNil: |
| 2105 | /* These are generated for static symbols in .o files, |
| 2106 | ignore them. */ |
| 2107 | return; |
| 2108 | case stStaticProc: |
| 2109 | case stProc: |
| 2110 | what = "procedure"; |
| 2111 | n_undef_procs++; |
| 2112 | break; |
| 2113 | case stGlobal: |
| 2114 | what = "variable"; |
| 2115 | n_undef_vars++; |
| 2116 | break; |
| 2117 | case stLabel: |
| 2118 | what = "label"; |
| 2119 | n_undef_labels++; |
| 2120 | break; |
| 2121 | default: |
| 2122 | what = "symbol"; |
| 2123 | break; |
| 2124 | } |
| 2125 | n_undef_symbols++; |
| 2126 | /* FIXME: Turn this into a complaint? */ |
| 2127 | if (info_verbose) |
| 2128 | printf_filtered (_("Warning: %s `%s' is undefined (in %s)\n"), |
| 2129 | what, debug_info->ssext + es->asym.iss, |
| 2130 | fdr_name (cur_fdr)); |
| 2131 | return; |
| 2132 | } |
| 2133 | |
| 2134 | switch (es->asym.st) |
| 2135 | { |
| 2136 | case stProc: |
| 2137 | case stStaticProc: |
| 2138 | /* There is no need to parse the external procedure symbols. |
| 2139 | If they are from objects compiled without -g, their index will |
| 2140 | be indexNil, and the symbol definition from the minimal symbol |
| 2141 | is preferrable (yielding a function returning int instead of int). |
| 2142 | If the index points to a local procedure symbol, the local |
| 2143 | symbol already provides the correct type. |
| 2144 | Note that the index of the external procedure symbol points |
| 2145 | to the local procedure symbol in the local symbol table, and |
| 2146 | _not_ to the auxiliary symbol info. */ |
| 2147 | break; |
| 2148 | case stGlobal: |
| 2149 | case stLabel: |
| 2150 | /* Global common symbols are resolved by the runtime loader, |
| 2151 | ignore them. */ |
| 2152 | if (SC_IS_COMMON (es->asym.sc)) |
| 2153 | break; |
| 2154 | |
| 2155 | /* Note that the case of a symbol with indexNil must be handled |
| 2156 | anyways by parse_symbol(). */ |
| 2157 | parse_symbol (&es->asym, ax, (char *) NULL, |
| 2158 | bigend, section_offsets, objfile); |
| 2159 | break; |
| 2160 | default: |
| 2161 | break; |
| 2162 | } |
| 2163 | } |
| 2164 | |
| 2165 | /* Parse the line number info for file descriptor FH into |
| 2166 | GDB's linetable LT. MIPS' encoding requires a little bit |
| 2167 | of magic to get things out. Note also that MIPS' line |
| 2168 | numbers can go back and forth, apparently we can live |
| 2169 | with that and do not need to reorder our linetables. */ |
| 2170 | |
| 2171 | static void parse_lines (FDR *, PDR *, struct linetable *, int, |
| 2172 | struct partial_symtab *, CORE_ADDR); |
| 2173 | |
| 2174 | static void |
| 2175 | parse_lines (FDR *fh, PDR *pr, struct linetable *lt, int maxlines, |
| 2176 | struct partial_symtab *pst, CORE_ADDR lowest_pdr_addr) |
| 2177 | { |
| 2178 | unsigned char *base; |
| 2179 | int j, k; |
| 2180 | int delta, count, lineno = 0; |
| 2181 | |
| 2182 | if (fh->cbLine == 0) |
| 2183 | return; |
| 2184 | |
| 2185 | /* Scan by procedure descriptors. */ |
| 2186 | k = 0; |
| 2187 | for (j = 0; j < fh->cpd; j++, pr++) |
| 2188 | { |
| 2189 | CORE_ADDR l; |
| 2190 | CORE_ADDR adr; |
| 2191 | unsigned char *halt; |
| 2192 | |
| 2193 | /* No code for this one. */ |
| 2194 | if (pr->iline == ilineNil || |
| 2195 | pr->lnLow == -1 || pr->lnHigh == -1) |
| 2196 | continue; |
| 2197 | |
| 2198 | /* Determine start and end address of compressed line bytes for |
| 2199 | this procedure. */ |
| 2200 | base = debug_info->line + fh->cbLineOffset; |
| 2201 | if (j != (fh->cpd - 1)) |
| 2202 | halt = base + pr[1].cbLineOffset; |
| 2203 | else |
| 2204 | halt = base + fh->cbLine; |
| 2205 | base += pr->cbLineOffset; |
| 2206 | |
| 2207 | adr = pst->textlow + pr->adr - lowest_pdr_addr; |
| 2208 | |
| 2209 | l = adr >> 2; /* in words */ |
| 2210 | for (lineno = pr->lnLow; base < halt;) |
| 2211 | { |
| 2212 | count = *base & 0x0f; |
| 2213 | delta = *base++ >> 4; |
| 2214 | if (delta >= 8) |
| 2215 | delta -= 16; |
| 2216 | if (delta == -8) |
| 2217 | { |
| 2218 | delta = (base[0] << 8) | base[1]; |
| 2219 | if (delta >= 0x8000) |
| 2220 | delta -= 0x10000; |
| 2221 | base += 2; |
| 2222 | } |
| 2223 | lineno += delta; /* first delta is 0 */ |
| 2224 | |
| 2225 | /* Complain if the line table overflows. Could happen |
| 2226 | with corrupt binaries. */ |
| 2227 | if (lt->nitems >= maxlines) |
| 2228 | { |
| 2229 | complaint (&symfile_complaints, |
| 2230 | _("guessed size of linetable for %s incorrectly"), |
| 2231 | fdr_name (fh)); |
| 2232 | break; |
| 2233 | } |
| 2234 | k = add_line (lt, lineno, l, k); |
| 2235 | l += count + 1; |
| 2236 | } |
| 2237 | } |
| 2238 | } |
| 2239 | \f |
| 2240 | static void |
| 2241 | function_outside_compilation_unit_complaint (const char *arg1) |
| 2242 | { |
| 2243 | complaint (&symfile_complaints, |
| 2244 | _("function `%s' appears to be defined " |
| 2245 | "outside of all compilation units"), |
| 2246 | arg1); |
| 2247 | } |
| 2248 | |
| 2249 | /* Use the STORAGE_CLASS to compute which section the given symbol |
| 2250 | belongs to, and then records this new minimal symbol. */ |
| 2251 | |
| 2252 | static void |
| 2253 | record_minimal_symbol (const char *name, const CORE_ADDR address, |
| 2254 | enum minimal_symbol_type ms_type, int storage_class, |
| 2255 | struct objfile *objfile) |
| 2256 | { |
| 2257 | int section; |
| 2258 | |
| 2259 | switch (storage_class) |
| 2260 | { |
| 2261 | case scText: |
| 2262 | section = SECT_OFF_TEXT (objfile); |
| 2263 | break; |
| 2264 | case scData: |
| 2265 | section = SECT_OFF_DATA (objfile); |
| 2266 | break; |
| 2267 | case scBss: |
| 2268 | section = SECT_OFF_BSS (objfile); |
| 2269 | break; |
| 2270 | case scSData: |
| 2271 | section = get_section_index (objfile, ".sdata"); |
| 2272 | break; |
| 2273 | case scSBss: |
| 2274 | section = get_section_index (objfile, ".sbss"); |
| 2275 | break; |
| 2276 | case scRData: |
| 2277 | section = get_section_index (objfile, ".rdata"); |
| 2278 | break; |
| 2279 | case scInit: |
| 2280 | section = get_section_index (objfile, ".init"); |
| 2281 | break; |
| 2282 | case scXData: |
| 2283 | section = get_section_index (objfile, ".xdata"); |
| 2284 | break; |
| 2285 | case scPData: |
| 2286 | section = get_section_index (objfile, ".pdata"); |
| 2287 | break; |
| 2288 | case scFini: |
| 2289 | section = get_section_index (objfile, ".fini"); |
| 2290 | break; |
| 2291 | case scRConst: |
| 2292 | section = get_section_index (objfile, ".rconst"); |
| 2293 | break; |
| 2294 | #ifdef scTlsData |
| 2295 | case scTlsData: |
| 2296 | section = get_section_index (objfile, ".tlsdata"); |
| 2297 | break; |
| 2298 | #endif |
| 2299 | #ifdef scTlsBss |
| 2300 | case scTlsBss: |
| 2301 | section = get_section_index (objfile, ".tlsbss"); |
| 2302 | break; |
| 2303 | #endif |
| 2304 | default: |
| 2305 | /* This kind of symbol is not associated to a section. */ |
| 2306 | section = -1; |
| 2307 | } |
| 2308 | |
| 2309 | prim_record_minimal_symbol_and_info (name, address, ms_type, |
| 2310 | section, objfile); |
| 2311 | } |
| 2312 | |
| 2313 | /* Master parsing procedure for first-pass reading of file symbols |
| 2314 | into a partial_symtab. */ |
| 2315 | |
| 2316 | static void |
| 2317 | parse_partial_symbols (struct objfile *objfile) |
| 2318 | { |
| 2319 | struct gdbarch *gdbarch = get_objfile_arch (objfile); |
| 2320 | const bfd_size_type external_sym_size = debug_swap->external_sym_size; |
| 2321 | const bfd_size_type external_rfd_size = debug_swap->external_rfd_size; |
| 2322 | const bfd_size_type external_ext_size = debug_swap->external_ext_size; |
| 2323 | void (*const swap_ext_in) (bfd *, void *, EXTR *) = debug_swap->swap_ext_in; |
| 2324 | void (*const swap_sym_in) (bfd *, void *, SYMR *) = debug_swap->swap_sym_in; |
| 2325 | void (*const swap_rfd_in) (bfd *, void *, RFDT *) = debug_swap->swap_rfd_in; |
| 2326 | int f_idx, s_idx; |
| 2327 | HDRR *hdr = &debug_info->symbolic_header; |
| 2328 | /* Running pointers */ |
| 2329 | FDR *fh; |
| 2330 | char *ext_out; |
| 2331 | char *ext_out_end; |
| 2332 | EXTR *ext_block; |
| 2333 | EXTR *ext_in; |
| 2334 | EXTR *ext_in_end; |
| 2335 | SYMR sh; |
| 2336 | struct partial_symtab *pst; |
| 2337 | int textlow_not_set = 1; |
| 2338 | int past_first_source_file = 0; |
| 2339 | |
| 2340 | /* List of current psymtab's include files. */ |
| 2341 | const char **psymtab_include_list; |
| 2342 | int includes_allocated; |
| 2343 | int includes_used; |
| 2344 | EXTR *extern_tab; |
| 2345 | struct pst_map *fdr_to_pst; |
| 2346 | /* Index within current psymtab dependency list. */ |
| 2347 | struct partial_symtab **dependency_list; |
| 2348 | int dependencies_used, dependencies_allocated; |
| 2349 | struct cleanup *old_chain; |
| 2350 | char *name; |
| 2351 | enum language prev_language; |
| 2352 | asection *text_sect; |
| 2353 | int relocatable = 0; |
| 2354 | |
| 2355 | /* Irix 5.2 shared libraries have a fh->adr field of zero, but |
| 2356 | the shared libraries are prelinked at a high memory address. |
| 2357 | We have to adjust the start address of the object file for this case, |
| 2358 | by setting it to the start address of the first procedure in the file. |
| 2359 | But we should do no adjustments if we are debugging a .o file, where |
| 2360 | the text section (and fh->adr) really starts at zero. */ |
| 2361 | text_sect = bfd_get_section_by_name (cur_bfd, ".text"); |
| 2362 | if (text_sect != NULL |
| 2363 | && (bfd_get_section_flags (cur_bfd, text_sect) & SEC_RELOC)) |
| 2364 | relocatable = 1; |
| 2365 | |
| 2366 | extern_tab = (EXTR *) obstack_alloc (&objfile->objfile_obstack, |
| 2367 | sizeof (EXTR) * hdr->iextMax); |
| 2368 | |
| 2369 | includes_allocated = 30; |
| 2370 | includes_used = 0; |
| 2371 | psymtab_include_list = (const char **) alloca (includes_allocated * |
| 2372 | sizeof (const char *)); |
| 2373 | next_symbol_text_func = mdebug_next_symbol_text; |
| 2374 | |
| 2375 | dependencies_allocated = 30; |
| 2376 | dependencies_used = 0; |
| 2377 | dependency_list = |
| 2378 | (struct partial_symtab **) alloca (dependencies_allocated * |
| 2379 | sizeof (struct partial_symtab *)); |
| 2380 | |
| 2381 | set_last_source_file (NULL); |
| 2382 | |
| 2383 | /* |
| 2384 | * Big plan: |
| 2385 | * |
| 2386 | * Only parse the Local and External symbols, and the Relative FDR. |
| 2387 | * Fixup enough of the loader symtab to be able to use it. |
| 2388 | * Allocate space only for the file's portions we need to |
| 2389 | * look at. (XXX) |
| 2390 | */ |
| 2391 | |
| 2392 | max_gdbinfo = 0; |
| 2393 | max_glevel = MIN_GLEVEL; |
| 2394 | |
| 2395 | /* Allocate the map FDR -> PST. |
| 2396 | Minor hack: -O3 images might claim some global data belongs |
| 2397 | to FDR -1. We`ll go along with that. */ |
| 2398 | fdr_to_pst = XCNEWVEC (struct pst_map, hdr->ifdMax + 1); |
| 2399 | old_chain = make_cleanup (xfree, fdr_to_pst); |
| 2400 | fdr_to_pst++; |
| 2401 | { |
| 2402 | struct partial_symtab *pst = new_psymtab ("", objfile); |
| 2403 | |
| 2404 | fdr_to_pst[-1].pst = pst; |
| 2405 | FDR_IDX (pst) = -1; |
| 2406 | } |
| 2407 | |
| 2408 | /* Allocate the global pending list. */ |
| 2409 | pending_list = |
| 2410 | ((struct mdebug_pending **) |
| 2411 | obstack_alloc (&objfile->objfile_obstack, |
| 2412 | hdr->ifdMax * sizeof (struct mdebug_pending *))); |
| 2413 | memset (pending_list, 0, |
| 2414 | hdr->ifdMax * sizeof (struct mdebug_pending *)); |
| 2415 | |
| 2416 | /* Pass 0 over external syms: swap them in. */ |
| 2417 | ext_block = XNEWVEC (EXTR, hdr->iextMax); |
| 2418 | make_cleanup (xfree, ext_block); |
| 2419 | |
| 2420 | ext_out = (char *) debug_info->external_ext; |
| 2421 | ext_out_end = ext_out + hdr->iextMax * external_ext_size; |
| 2422 | ext_in = ext_block; |
| 2423 | for (; ext_out < ext_out_end; ext_out += external_ext_size, ext_in++) |
| 2424 | (*swap_ext_in) (cur_bfd, ext_out, ext_in); |
| 2425 | |
| 2426 | /* Pass 1 over external syms: Presize and partition the list. */ |
| 2427 | ext_in = ext_block; |
| 2428 | ext_in_end = ext_in + hdr->iextMax; |
| 2429 | for (; ext_in < ext_in_end; ext_in++) |
| 2430 | { |
| 2431 | /* See calls to complain below. */ |
| 2432 | if (ext_in->ifd >= -1 |
| 2433 | && ext_in->ifd < hdr->ifdMax |
| 2434 | && ext_in->asym.iss >= 0 |
| 2435 | && ext_in->asym.iss < hdr->issExtMax) |
| 2436 | fdr_to_pst[ext_in->ifd].n_globals++; |
| 2437 | } |
| 2438 | |
| 2439 | /* Pass 1.5 over files: partition out global symbol space. */ |
| 2440 | s_idx = 0; |
| 2441 | for (f_idx = -1; f_idx < hdr->ifdMax; f_idx++) |
| 2442 | { |
| 2443 | fdr_to_pst[f_idx].globals_offset = s_idx; |
| 2444 | s_idx += fdr_to_pst[f_idx].n_globals; |
| 2445 | fdr_to_pst[f_idx].n_globals = 0; |
| 2446 | } |
| 2447 | |
| 2448 | /* ECOFF in ELF: |
| 2449 | |
| 2450 | For ECOFF in ELF, we skip the creation of the minimal symbols. |
| 2451 | The ECOFF symbols should be a subset of the Elf symbols, and the |
| 2452 | section information of the elf symbols will be more accurate. |
| 2453 | FIXME! What about Irix 5's native linker? |
| 2454 | |
| 2455 | By default, Elf sections which don't exist in ECOFF |
| 2456 | get put in ECOFF's absolute section by the gnu linker. |
| 2457 | Since absolute sections don't get relocated, we |
| 2458 | end up calculating an address different from that of |
| 2459 | the symbol's minimal symbol (created earlier from the |
| 2460 | Elf symtab). |
| 2461 | |
| 2462 | To fix this, either : |
| 2463 | 1) don't create the duplicate symbol |
| 2464 | (assumes ECOFF symtab is a subset of the ELF symtab; |
| 2465 | assumes no side-effects result from ignoring ECOFF symbol) |
| 2466 | 2) create it, only if lookup for existing symbol in ELF's minimal |
| 2467 | symbols fails |
| 2468 | (inefficient; |
| 2469 | assumes no side-effects result from ignoring ECOFF symbol) |
| 2470 | 3) create it, but lookup ELF's minimal symbol and use it's section |
| 2471 | during relocation, then modify "uniqify" phase to merge and |
| 2472 | eliminate the duplicate symbol |
| 2473 | (highly inefficient) |
| 2474 | |
| 2475 | I've implemented #1 here... |
| 2476 | Skip the creation of the minimal symbols based on the ECOFF |
| 2477 | symbol table. */ |
| 2478 | |
| 2479 | /* Pass 2 over external syms: fill in external symbols. */ |
| 2480 | ext_in = ext_block; |
| 2481 | ext_in_end = ext_in + hdr->iextMax; |
| 2482 | for (; ext_in < ext_in_end; ext_in++) |
| 2483 | { |
| 2484 | enum minimal_symbol_type ms_type = mst_text; |
| 2485 | CORE_ADDR svalue = ext_in->asym.value; |
| 2486 | |
| 2487 | /* The Irix 5 native tools seem to sometimes generate bogus |
| 2488 | external symbols. */ |
| 2489 | if (ext_in->ifd < -1 || ext_in->ifd >= hdr->ifdMax) |
| 2490 | { |
| 2491 | complaint (&symfile_complaints, |
| 2492 | _("bad ifd for external symbol: %d (max %ld)"), |
| 2493 | ext_in->ifd, hdr->ifdMax); |
| 2494 | continue; |
| 2495 | } |
| 2496 | if (ext_in->asym.iss < 0 || ext_in->asym.iss >= hdr->issExtMax) |
| 2497 | { |
| 2498 | complaint (&symfile_complaints, |
| 2499 | _("bad iss for external symbol: %ld (max %ld)"), |
| 2500 | ext_in->asym.iss, hdr->issExtMax); |
| 2501 | continue; |
| 2502 | } |
| 2503 | |
| 2504 | extern_tab[fdr_to_pst[ext_in->ifd].globals_offset |
| 2505 | + fdr_to_pst[ext_in->ifd].n_globals++] = *ext_in; |
| 2506 | |
| 2507 | |
| 2508 | if (SC_IS_UNDEF (ext_in->asym.sc) || ext_in->asym.sc == scNil) |
| 2509 | continue; |
| 2510 | |
| 2511 | |
| 2512 | /* Pass 3 over files, over local syms: fill in static symbols. */ |
| 2513 | name = debug_info->ssext + ext_in->asym.iss; |
| 2514 | |
| 2515 | /* Process ECOFF Symbol Types and Storage Classes. */ |
| 2516 | switch (ext_in->asym.st) |
| 2517 | { |
| 2518 | case stProc: |
| 2519 | /* Beginnning of Procedure */ |
| 2520 | break; |
| 2521 | case stStaticProc: |
| 2522 | /* Load time only static procs */ |
| 2523 | ms_type = mst_file_text; |
| 2524 | break; |
| 2525 | case stGlobal: |
| 2526 | /* External symbol */ |
| 2527 | if (SC_IS_COMMON (ext_in->asym.sc)) |
| 2528 | { |
| 2529 | /* The value of a common symbol is its size, not its address. |
| 2530 | Ignore it. */ |
| 2531 | continue; |
| 2532 | } |
| 2533 | else if (SC_IS_DATA (ext_in->asym.sc)) |
| 2534 | { |
| 2535 | ms_type = mst_data; |
| 2536 | } |
| 2537 | else if (SC_IS_BSS (ext_in->asym.sc)) |
| 2538 | { |
| 2539 | ms_type = mst_bss; |
| 2540 | } |
| 2541 | else if (SC_IS_SBSS (ext_in->asym.sc)) |
| 2542 | { |
| 2543 | ms_type = mst_bss; |
| 2544 | } |
| 2545 | else |
| 2546 | ms_type = mst_abs; |
| 2547 | break; |
| 2548 | case stLabel: |
| 2549 | /* Label */ |
| 2550 | |
| 2551 | /* On certain platforms, some extra label symbols can be |
| 2552 | generated by the linker. One possible usage for this kind |
| 2553 | of symbols is to represent the address of the begining of a |
| 2554 | given section. For instance, on Tru64 5.1, the address of |
| 2555 | the _ftext label is the start address of the .text section. |
| 2556 | |
| 2557 | The storage class of these symbols is usually directly |
| 2558 | related to the section to which the symbol refers. For |
| 2559 | instance, on Tru64 5.1, the storage class for the _fdata |
| 2560 | label is scData, refering to the .data section. |
| 2561 | |
| 2562 | It is actually possible that the section associated to the |
| 2563 | storage class of the label does not exist. On True64 5.1 |
| 2564 | for instance, the libm.so shared library does not contain |
| 2565 | any .data section, although it contains a _fpdata label |
| 2566 | which storage class is scData... Since these symbols are |
| 2567 | usually useless for the debugger user anyway, we just |
| 2568 | discard these symbols. */ |
| 2569 | |
| 2570 | if (SC_IS_TEXT (ext_in->asym.sc)) |
| 2571 | { |
| 2572 | if (objfile->sect_index_text == -1) |
| 2573 | continue; |
| 2574 | |
| 2575 | ms_type = mst_file_text; |
| 2576 | } |
| 2577 | else if (SC_IS_DATA (ext_in->asym.sc)) |
| 2578 | { |
| 2579 | if (objfile->sect_index_data == -1) |
| 2580 | continue; |
| 2581 | |
| 2582 | ms_type = mst_file_data; |
| 2583 | } |
| 2584 | else if (SC_IS_BSS (ext_in->asym.sc)) |
| 2585 | { |
| 2586 | if (objfile->sect_index_bss == -1) |
| 2587 | continue; |
| 2588 | |
| 2589 | ms_type = mst_file_bss; |
| 2590 | } |
| 2591 | else if (SC_IS_SBSS (ext_in->asym.sc)) |
| 2592 | { |
| 2593 | const int sbss_sect_index = get_section_index (objfile, ".sbss"); |
| 2594 | |
| 2595 | if (sbss_sect_index == -1) |
| 2596 | continue; |
| 2597 | |
| 2598 | ms_type = mst_file_bss; |
| 2599 | } |
| 2600 | else |
| 2601 | ms_type = mst_abs; |
| 2602 | break; |
| 2603 | case stLocal: |
| 2604 | case stNil: |
| 2605 | /* The alpha has the section start addresses in stLocal symbols |
| 2606 | whose name starts with a `.'. Skip those but complain for all |
| 2607 | other stLocal symbols. |
| 2608 | Irix6 puts the section start addresses in stNil symbols, skip |
| 2609 | those too. */ |
| 2610 | if (name[0] == '.') |
| 2611 | continue; |
| 2612 | /* Fall through. */ |
| 2613 | default: |
| 2614 | ms_type = mst_unknown; |
| 2615 | unknown_ext_complaint (name); |
| 2616 | } |
| 2617 | if (!ECOFF_IN_ELF (cur_bfd)) |
| 2618 | record_minimal_symbol (name, svalue, ms_type, ext_in->asym.sc, |
| 2619 | objfile); |
| 2620 | } |
| 2621 | |
| 2622 | /* Pass 3 over files, over local syms: fill in static symbols. */ |
| 2623 | for (f_idx = 0; f_idx < hdr->ifdMax; f_idx++) |
| 2624 | { |
| 2625 | struct partial_symtab *save_pst; |
| 2626 | EXTR *ext_ptr; |
| 2627 | CORE_ADDR textlow; |
| 2628 | |
| 2629 | cur_fdr = fh = debug_info->fdr + f_idx; |
| 2630 | |
| 2631 | if (fh->csym == 0) |
| 2632 | { |
| 2633 | fdr_to_pst[f_idx].pst = NULL; |
| 2634 | continue; |
| 2635 | } |
| 2636 | |
| 2637 | /* Determine the start address for this object file from the |
| 2638 | file header and relocate it, except for Irix 5.2 zero fh->adr. */ |
| 2639 | if (fh->cpd) |
| 2640 | { |
| 2641 | textlow = fh->adr; |
| 2642 | if (relocatable || textlow != 0) |
| 2643 | textlow += ANOFFSET (objfile->section_offsets, |
| 2644 | SECT_OFF_TEXT (objfile)); |
| 2645 | } |
| 2646 | else |
| 2647 | textlow = 0; |
| 2648 | pst = start_psymtab_common (objfile, |
| 2649 | fdr_name (fh), |
| 2650 | textlow, |
| 2651 | objfile->global_psymbols.next, |
| 2652 | objfile->static_psymbols.next); |
| 2653 | pst->read_symtab_private = obstack_alloc (&objfile->objfile_obstack, |
| 2654 | sizeof (struct symloc)); |
| 2655 | memset (pst->read_symtab_private, 0, sizeof (struct symloc)); |
| 2656 | |
| 2657 | save_pst = pst; |
| 2658 | FDR_IDX (pst) = f_idx; |
| 2659 | CUR_BFD (pst) = cur_bfd; |
| 2660 | DEBUG_SWAP (pst) = debug_swap; |
| 2661 | DEBUG_INFO (pst) = debug_info; |
| 2662 | PENDING_LIST (pst) = pending_list; |
| 2663 | |
| 2664 | /* The way to turn this into a symtab is to call... */ |
| 2665 | pst->read_symtab = mdebug_read_symtab; |
| 2666 | |
| 2667 | /* Set up language for the pst. |
| 2668 | The language from the FDR is used if it is unambigious (e.g. cfront |
| 2669 | with native cc and g++ will set the language to C). |
| 2670 | Otherwise we have to deduce the language from the filename. |
| 2671 | Native ecoff has every header file in a separate FDR, so |
| 2672 | deduce_language_from_filename will return language_unknown for |
| 2673 | a header file, which is not what we want. |
| 2674 | But the FDRs for the header files are after the FDR for the source |
| 2675 | file, so we can assign the language of the source file to the |
| 2676 | following header files. Then we save the language in the private |
| 2677 | pst data so that we can reuse it when building symtabs. */ |
| 2678 | prev_language = psymtab_language; |
| 2679 | |
| 2680 | switch (fh->lang) |
| 2681 | { |
| 2682 | case langCplusplusV2: |
| 2683 | psymtab_language = language_cplus; |
| 2684 | break; |
| 2685 | default: |
| 2686 | psymtab_language = deduce_language_from_filename (fdr_name (fh)); |
| 2687 | break; |
| 2688 | } |
| 2689 | if (psymtab_language == language_unknown) |
| 2690 | psymtab_language = prev_language; |
| 2691 | PST_PRIVATE (pst)->pst_language = psymtab_language; |
| 2692 | |
| 2693 | pst->texthigh = pst->textlow; |
| 2694 | |
| 2695 | /* For stabs-in-ecoff files, the second symbol must be @stab. |
| 2696 | This symbol is emitted by mips-tfile to signal that the |
| 2697 | current object file uses encapsulated stabs instead of mips |
| 2698 | ecoff for local symbols. (It is the second symbol because |
| 2699 | the first symbol is the stFile used to signal the start of a |
| 2700 | file). */ |
| 2701 | processing_gcc_compilation = 0; |
| 2702 | if (fh->csym >= 2) |
| 2703 | { |
| 2704 | (*swap_sym_in) (cur_bfd, |
| 2705 | ((char *) debug_info->external_sym |
| 2706 | + (fh->isymBase + 1) * external_sym_size), |
| 2707 | &sh); |
| 2708 | if (strcmp (debug_info->ss + fh->issBase + sh.iss, |
| 2709 | stabs_symbol) == 0) |
| 2710 | processing_gcc_compilation = 2; |
| 2711 | } |
| 2712 | |
| 2713 | if (processing_gcc_compilation != 0) |
| 2714 | { |
| 2715 | for (cur_sdx = 2; cur_sdx < fh->csym; cur_sdx++) |
| 2716 | { |
| 2717 | int type_code; |
| 2718 | const char *namestring; |
| 2719 | |
| 2720 | (*swap_sym_in) (cur_bfd, |
| 2721 | (((char *) debug_info->external_sym) |
| 2722 | + (fh->isymBase + cur_sdx) * external_sym_size), |
| 2723 | &sh); |
| 2724 | type_code = ECOFF_UNMARK_STAB (sh.index); |
| 2725 | if (!ECOFF_IS_STAB (&sh)) |
| 2726 | { |
| 2727 | if (sh.st == stProc || sh.st == stStaticProc) |
| 2728 | { |
| 2729 | CORE_ADDR procaddr; |
| 2730 | long isym; |
| 2731 | |
| 2732 | if (sh.st == stStaticProc) |
| 2733 | { |
| 2734 | namestring = debug_info->ss + fh->issBase + sh.iss; |
| 2735 | record_minimal_symbol (namestring, sh.value, |
| 2736 | mst_file_text, sh.sc, |
| 2737 | objfile); |
| 2738 | } |
| 2739 | sh.value += ANOFFSET (objfile->section_offsets, |
| 2740 | SECT_OFF_TEXT (objfile)); |
| 2741 | procaddr = sh.value; |
| 2742 | |
| 2743 | isym = AUX_GET_ISYM (fh->fBigendian, |
| 2744 | (debug_info->external_aux |
| 2745 | + fh->iauxBase |
| 2746 | + sh.index)); |
| 2747 | (*swap_sym_in) (cur_bfd, |
| 2748 | ((char *) debug_info->external_sym |
| 2749 | + ((fh->isymBase + isym - 1) |
| 2750 | * external_sym_size)), |
| 2751 | &sh); |
| 2752 | if (sh.st == stEnd) |
| 2753 | { |
| 2754 | CORE_ADDR high = procaddr + sh.value; |
| 2755 | |
| 2756 | /* Kludge for Irix 5.2 zero fh->adr. */ |
| 2757 | if (!relocatable |
| 2758 | && (pst->textlow == 0 || procaddr < pst->textlow)) |
| 2759 | pst->textlow = procaddr; |
| 2760 | if (high > pst->texthigh) |
| 2761 | pst->texthigh = high; |
| 2762 | } |
| 2763 | } |
| 2764 | else if (sh.st == stStatic) |
| 2765 | { |
| 2766 | switch (sh.sc) |
| 2767 | { |
| 2768 | case scUndefined: |
| 2769 | case scSUndefined: |
| 2770 | case scNil: |
| 2771 | case scAbs: |
| 2772 | break; |
| 2773 | |
| 2774 | case scData: |
| 2775 | case scSData: |
| 2776 | case scRData: |
| 2777 | case scPData: |
| 2778 | case scXData: |
| 2779 | namestring = debug_info->ss + fh->issBase + sh.iss; |
| 2780 | record_minimal_symbol (namestring, sh.value, |
| 2781 | mst_file_data, sh.sc, |
| 2782 | objfile); |
| 2783 | sh.value += ANOFFSET (objfile->section_offsets, |
| 2784 | SECT_OFF_DATA (objfile)); |
| 2785 | break; |
| 2786 | |
| 2787 | default: |
| 2788 | /* FIXME! Shouldn't this use cases for bss, |
| 2789 | then have the default be abs? */ |
| 2790 | namestring = debug_info->ss + fh->issBase + sh.iss; |
| 2791 | record_minimal_symbol (namestring, sh.value, |
| 2792 | mst_file_bss, sh.sc, |
| 2793 | objfile); |
| 2794 | sh.value += ANOFFSET (objfile->section_offsets, |
| 2795 | SECT_OFF_BSS (objfile)); |
| 2796 | break; |
| 2797 | } |
| 2798 | } |
| 2799 | continue; |
| 2800 | } |
| 2801 | /* Handle stabs continuation. */ |
| 2802 | { |
| 2803 | char *stabstring = debug_info->ss + fh->issBase + sh.iss; |
| 2804 | int len = strlen (stabstring); |
| 2805 | |
| 2806 | while (stabstring[len - 1] == '\\') |
| 2807 | { |
| 2808 | SYMR sh2; |
| 2809 | char *stabstring1 = stabstring; |
| 2810 | char *stabstring2; |
| 2811 | int len2; |
| 2812 | |
| 2813 | /* Ignore continuation char from 1st string. */ |
| 2814 | len--; |
| 2815 | |
| 2816 | /* Read next stabstring. */ |
| 2817 | cur_sdx++; |
| 2818 | (*swap_sym_in) (cur_bfd, |
| 2819 | (((char *) debug_info->external_sym) |
| 2820 | + (fh->isymBase + cur_sdx) |
| 2821 | * external_sym_size), |
| 2822 | &sh2); |
| 2823 | stabstring2 = debug_info->ss + fh->issBase + sh2.iss; |
| 2824 | len2 = strlen (stabstring2); |
| 2825 | |
| 2826 | /* Concatinate stabstring2 with stabstring1. */ |
| 2827 | if (stabstring |
| 2828 | && stabstring != debug_info->ss + fh->issBase + sh.iss) |
| 2829 | stabstring = xrealloc (stabstring, len + len2 + 1); |
| 2830 | else |
| 2831 | { |
| 2832 | stabstring = xmalloc (len + len2 + 1); |
| 2833 | strcpy (stabstring, stabstring1); |
| 2834 | } |
| 2835 | strcpy (stabstring + len, stabstring2); |
| 2836 | len += len2; |
| 2837 | } |
| 2838 | |
| 2839 | switch (type_code) |
| 2840 | { |
| 2841 | char *p; |
| 2842 | |
| 2843 | /* Standard, external, non-debugger, symbols. */ |
| 2844 | |
| 2845 | case N_TEXT | N_EXT: |
| 2846 | case N_NBTEXT | N_EXT: |
| 2847 | sh.value += ANOFFSET (objfile->section_offsets, |
| 2848 | SECT_OFF_TEXT (objfile)); |
| 2849 | goto record_it; |
| 2850 | |
| 2851 | case N_DATA | N_EXT: |
| 2852 | case N_NBDATA | N_EXT: |
| 2853 | sh.value += ANOFFSET (objfile->section_offsets, |
| 2854 | SECT_OFF_DATA (objfile)); |
| 2855 | goto record_it; |
| 2856 | |
| 2857 | case N_BSS: |
| 2858 | case N_BSS | N_EXT: |
| 2859 | case N_NBBSS | N_EXT: |
| 2860 | case N_SETV | N_EXT: /* FIXME, is this in BSS? */ |
| 2861 | sh.value += ANOFFSET (objfile->section_offsets, |
| 2862 | SECT_OFF_BSS (objfile)); |
| 2863 | goto record_it; |
| 2864 | |
| 2865 | case N_ABS | N_EXT: |
| 2866 | record_it: |
| 2867 | continue; |
| 2868 | |
| 2869 | /* Standard, local, non-debugger, symbols. */ |
| 2870 | |
| 2871 | case N_NBTEXT: |
| 2872 | |
| 2873 | /* We need to be able to deal with both N_FN or |
| 2874 | N_TEXT, because we have no way of knowing |
| 2875 | whether the sys-supplied ld or GNU ld was used |
| 2876 | to make the executable. Sequents throw in |
| 2877 | another wrinkle -- they renumbered N_FN. */ |
| 2878 | |
| 2879 | case N_FN: |
| 2880 | case N_FN_SEQ: |
| 2881 | case N_TEXT: |
| 2882 | continue; |
| 2883 | |
| 2884 | case N_DATA: |
| 2885 | sh.value += ANOFFSET (objfile->section_offsets, |
| 2886 | SECT_OFF_DATA (objfile)); |
| 2887 | goto record_it; |
| 2888 | |
| 2889 | case N_UNDF | N_EXT: |
| 2890 | continue; /* Just undefined, not COMMON. */ |
| 2891 | |
| 2892 | case N_UNDF: |
| 2893 | continue; |
| 2894 | |
| 2895 | /* Lots of symbol types we can just ignore. */ |
| 2896 | |
| 2897 | case N_ABS: |
| 2898 | case N_NBDATA: |
| 2899 | case N_NBBSS: |
| 2900 | continue; |
| 2901 | |
| 2902 | /* Keep going . . . */ |
| 2903 | |
| 2904 | /* |
| 2905 | * Special symbol types for GNU |
| 2906 | */ |
| 2907 | case N_INDR: |
| 2908 | case N_INDR | N_EXT: |
| 2909 | case N_SETA: |
| 2910 | case N_SETA | N_EXT: |
| 2911 | case N_SETT: |
| 2912 | case N_SETT | N_EXT: |
| 2913 | case N_SETD: |
| 2914 | case N_SETD | N_EXT: |
| 2915 | case N_SETB: |
| 2916 | case N_SETB | N_EXT: |
| 2917 | case N_SETV: |
| 2918 | continue; |
| 2919 | |
| 2920 | /* |
| 2921 | * Debugger symbols |
| 2922 | */ |
| 2923 | |
| 2924 | case N_SO: |
| 2925 | { |
| 2926 | CORE_ADDR valu; |
| 2927 | static int prev_so_symnum = -10; |
| 2928 | static int first_so_symnum; |
| 2929 | const char *p; |
| 2930 | int prev_textlow_not_set; |
| 2931 | |
| 2932 | valu = sh.value + ANOFFSET (objfile->section_offsets, |
| 2933 | SECT_OFF_TEXT (objfile)); |
| 2934 | |
| 2935 | prev_textlow_not_set = textlow_not_set; |
| 2936 | |
| 2937 | /* A zero value is probably an indication for the |
| 2938 | SunPRO 3.0 compiler. dbx_end_psymtab explicitly tests |
| 2939 | for zero, so don't relocate it. */ |
| 2940 | |
| 2941 | if (sh.value == 0 |
| 2942 | && gdbarch_sofun_address_maybe_missing (gdbarch)) |
| 2943 | { |
| 2944 | textlow_not_set = 1; |
| 2945 | valu = 0; |
| 2946 | } |
| 2947 | else |
| 2948 | textlow_not_set = 0; |
| 2949 | |
| 2950 | past_first_source_file = 1; |
| 2951 | |
| 2952 | if (prev_so_symnum != symnum - 1) |
| 2953 | { /* Here if prev stab wasn't N_SO. */ |
| 2954 | first_so_symnum = symnum; |
| 2955 | |
| 2956 | if (pst) |
| 2957 | { |
| 2958 | pst = (struct partial_symtab *) 0; |
| 2959 | includes_used = 0; |
| 2960 | dependencies_used = 0; |
| 2961 | } |
| 2962 | } |
| 2963 | |
| 2964 | prev_so_symnum = symnum; |
| 2965 | |
| 2966 | /* End the current partial symtab and start a |
| 2967 | new one. */ |
| 2968 | |
| 2969 | /* SET_NAMESTRING ();*/ |
| 2970 | namestring = stabstring; |
| 2971 | |
| 2972 | /* Null name means end of .o file. Don't start a new |
| 2973 | one. */ |
| 2974 | if (*namestring == '\000') |
| 2975 | continue; |
| 2976 | |
| 2977 | /* Some compilers (including gcc) emit a pair of |
| 2978 | initial N_SOs. The first one is a directory name; |
| 2979 | the second the file name. If pst exists, is |
| 2980 | empty, and has a filename ending in '/', we assume |
| 2981 | the previous N_SO was a directory name. */ |
| 2982 | p = lbasename (namestring); |
| 2983 | if (p != namestring && *p == '\000') |
| 2984 | continue; /* Simply ignore directory |
| 2985 | name SOs. */ |
| 2986 | |
| 2987 | /* Some other compilers (C++ ones in particular) emit |
| 2988 | useless SOs for non-existant .c files. We ignore |
| 2989 | all subsequent SOs that immediately follow the |
| 2990 | first. */ |
| 2991 | |
| 2992 | if (!pst) |
| 2993 | pst = save_pst; |
| 2994 | continue; |
| 2995 | } |
| 2996 | |
| 2997 | case N_BINCL: |
| 2998 | continue; |
| 2999 | |
| 3000 | case N_SOL: |
| 3001 | { |
| 3002 | enum language tmp_language; |
| 3003 | |
| 3004 | /* Mark down an include file in the current psymtab. */ |
| 3005 | |
| 3006 | /* SET_NAMESTRING (); */ |
| 3007 | namestring = stabstring; |
| 3008 | |
| 3009 | tmp_language |
| 3010 | = deduce_language_from_filename (namestring); |
| 3011 | |
| 3012 | /* Only change the psymtab's language if we've |
| 3013 | learned something useful (eg. tmp_language is not |
| 3014 | language_unknown). In addition, to match what |
| 3015 | start_subfile does, never change from C++ to |
| 3016 | C. */ |
| 3017 | if (tmp_language != language_unknown |
| 3018 | && (tmp_language != language_c |
| 3019 | || psymtab_language != language_cplus)) |
| 3020 | psymtab_language = tmp_language; |
| 3021 | |
| 3022 | /* In C++, one may expect the same filename to come |
| 3023 | round many times, when code is coming alternately |
| 3024 | from the main file and from inline functions in |
| 3025 | other files. So I check to see if this is a file |
| 3026 | we've seen before -- either the main source file, |
| 3027 | or a previously included file. |
| 3028 | |
| 3029 | This seems to be a lot of time to be spending on |
| 3030 | N_SOL, but things like "break c-exp.y:435" need to |
| 3031 | work (I suppose the psymtab_include_list could be |
| 3032 | hashed or put in a binary tree, if profiling shows |
| 3033 | this is a major hog). */ |
| 3034 | if (pst && filename_cmp (namestring, pst->filename) == 0) |
| 3035 | continue; |
| 3036 | |
| 3037 | { |
| 3038 | int i; |
| 3039 | |
| 3040 | for (i = 0; i < includes_used; i++) |
| 3041 | if (filename_cmp (namestring, |
| 3042 | psymtab_include_list[i]) == 0) |
| 3043 | { |
| 3044 | i = -1; |
| 3045 | break; |
| 3046 | } |
| 3047 | if (i == -1) |
| 3048 | continue; |
| 3049 | } |
| 3050 | |
| 3051 | psymtab_include_list[includes_used++] = namestring; |
| 3052 | if (includes_used >= includes_allocated) |
| 3053 | { |
| 3054 | const char **orig = psymtab_include_list; |
| 3055 | |
| 3056 | psymtab_include_list = (const char **) |
| 3057 | alloca ((includes_allocated *= 2) * |
| 3058 | sizeof (const char *)); |
| 3059 | memcpy (psymtab_include_list, orig, |
| 3060 | includes_used * sizeof (const char *)); |
| 3061 | } |
| 3062 | continue; |
| 3063 | } |
| 3064 | case N_LSYM: /* Typedef or automatic variable. */ |
| 3065 | case N_STSYM: /* Data seg var -- static */ |
| 3066 | case N_LCSYM: /* BSS " */ |
| 3067 | case N_ROSYM: /* Read-only data seg var -- static. */ |
| 3068 | case N_NBSTS: /* Gould nobase. */ |
| 3069 | case N_NBLCS: /* symbols. */ |
| 3070 | case N_FUN: |
| 3071 | case N_GSYM: /* Global (extern) variable; can be |
| 3072 | data or bss (sigh FIXME). */ |
| 3073 | |
| 3074 | /* Following may probably be ignored; I'll leave them here |
| 3075 | for now (until I do Pascal and Modula 2 extensions). */ |
| 3076 | |
| 3077 | case N_PC: /* I may or may not need this; I |
| 3078 | suspect not. */ |
| 3079 | case N_M2C: /* I suspect that I can ignore this |
| 3080 | here. */ |
| 3081 | case N_SCOPE: /* Same. */ |
| 3082 | |
| 3083 | /* SET_NAMESTRING (); */ |
| 3084 | namestring = stabstring; |
| 3085 | p = (char *) strchr (namestring, ':'); |
| 3086 | if (!p) |
| 3087 | continue; /* Not a debugging symbol. */ |
| 3088 | |
| 3089 | |
| 3090 | |
| 3091 | /* Main processing section for debugging symbols which |
| 3092 | the initial read through the symbol tables needs to |
| 3093 | worry about. If we reach this point, the symbol |
| 3094 | which we are considering is definitely one we are |
| 3095 | interested in. p must also contain the (valid) |
| 3096 | index into the namestring which indicates the |
| 3097 | debugging type symbol. */ |
| 3098 | |
| 3099 | switch (p[1]) |
| 3100 | { |
| 3101 | case 'S': |
| 3102 | sh.value += ANOFFSET (objfile->section_offsets, |
| 3103 | SECT_OFF_DATA (objfile)); |
| 3104 | |
| 3105 | if (gdbarch_static_transform_name_p (gdbarch)) |
| 3106 | namestring = gdbarch_static_transform_name |
| 3107 | (gdbarch, namestring); |
| 3108 | |
| 3109 | add_psymbol_to_list (namestring, p - namestring, 1, |
| 3110 | VAR_DOMAIN, LOC_STATIC, |
| 3111 | &objfile->static_psymbols, |
| 3112 | sh.value, |
| 3113 | psymtab_language, objfile); |
| 3114 | continue; |
| 3115 | case 'G': |
| 3116 | sh.value += ANOFFSET (objfile->section_offsets, |
| 3117 | SECT_OFF_DATA (objfile)); |
| 3118 | /* The addresses in these entries are reported |
| 3119 | to be wrong. See the code that reads 'G's |
| 3120 | for symtabs. */ |
| 3121 | add_psymbol_to_list (namestring, p - namestring, 1, |
| 3122 | VAR_DOMAIN, LOC_STATIC, |
| 3123 | &objfile->global_psymbols, |
| 3124 | sh.value, |
| 3125 | psymtab_language, objfile); |
| 3126 | continue; |
| 3127 | |
| 3128 | case 'T': |
| 3129 | /* When a 'T' entry is defining an anonymous enum, it |
| 3130 | may have a name which is the empty string, or a |
| 3131 | single space. Since they're not really defining a |
| 3132 | symbol, those shouldn't go in the partial symbol |
| 3133 | table. We do pick up the elements of such enums at |
| 3134 | 'check_enum:', below. */ |
| 3135 | if (p >= namestring + 2 |
| 3136 | || (p == namestring + 1 |
| 3137 | && namestring[0] != ' ')) |
| 3138 | { |
| 3139 | add_psymbol_to_list (namestring, p - namestring, 1, |
| 3140 | STRUCT_DOMAIN, LOC_TYPEDEF, |
| 3141 | &objfile->static_psymbols, |
| 3142 | 0, psymtab_language, objfile); |
| 3143 | if (p[2] == 't') |
| 3144 | { |
| 3145 | /* Also a typedef with the same name. */ |
| 3146 | add_psymbol_to_list (namestring, |
| 3147 | p - namestring, 1, |
| 3148 | VAR_DOMAIN, LOC_TYPEDEF, |
| 3149 | &objfile->static_psymbols, |
| 3150 | 0, psymtab_language, |
| 3151 | objfile); |
| 3152 | p += 1; |
| 3153 | } |
| 3154 | } |
| 3155 | goto check_enum; |
| 3156 | case 't': |
| 3157 | if (p != namestring) /* a name is there, not |
| 3158 | just :T... */ |
| 3159 | { |
| 3160 | add_psymbol_to_list (namestring, p - namestring, 1, |
| 3161 | VAR_DOMAIN, LOC_TYPEDEF, |
| 3162 | &objfile->static_psymbols, |
| 3163 | 0, psymtab_language, objfile); |
| 3164 | } |
| 3165 | check_enum: |
| 3166 | /* If this is an enumerated type, we need to add |
| 3167 | all the enum constants to the partial symbol |
| 3168 | table. This does not cover enums without names, |
| 3169 | e.g. "enum {a, b} c;" in C, but fortunately |
| 3170 | those are rare. There is no way for GDB to find |
| 3171 | those from the enum type without spending too |
| 3172 | much time on it. Thus to solve this problem, |
| 3173 | the compiler needs to put out the enum in a |
| 3174 | nameless type. GCC2 does this. */ |
| 3175 | |
| 3176 | /* We are looking for something of the form |
| 3177 | <name> ":" ("t" | "T") [<number> "="] "e" |
| 3178 | {<constant> ":" <value> ","} ";". */ |
| 3179 | |
| 3180 | /* Skip over the colon and the 't' or 'T'. */ |
| 3181 | p += 2; |
| 3182 | /* This type may be given a number. Also, numbers |
| 3183 | can come in pairs like (0,26). Skip over it. */ |
| 3184 | while ((*p >= '0' && *p <= '9') |
| 3185 | || *p == '(' || *p == ',' || *p == ')' |
| 3186 | || *p == '=') |
| 3187 | p++; |
| 3188 | |
| 3189 | if (*p++ == 'e') |
| 3190 | { |
| 3191 | /* The aix4 compiler emits extra crud before |
| 3192 | the members. */ |
| 3193 | if (*p == '-') |
| 3194 | { |
| 3195 | /* Skip over the type (?). */ |
| 3196 | while (*p != ':') |
| 3197 | p++; |
| 3198 | |
| 3199 | /* Skip over the colon. */ |
| 3200 | p++; |
| 3201 | } |
| 3202 | |
| 3203 | /* We have found an enumerated type. */ |
| 3204 | /* According to comments in read_enum_type |
| 3205 | a comma could end it instead of a semicolon. |
| 3206 | I don't know where that happens. |
| 3207 | Accept either. */ |
| 3208 | while (*p && *p != ';' && *p != ',') |
| 3209 | { |
| 3210 | char *q; |
| 3211 | |
| 3212 | /* Check for and handle cretinous dbx |
| 3213 | symbol name continuation! */ |
| 3214 | if (*p == '\\' || (*p == '?' && p[1] == '\0')) |
| 3215 | p = next_symbol_text (objfile); |
| 3216 | |
| 3217 | /* Point to the character after the name |
| 3218 | of the enum constant. */ |
| 3219 | for (q = p; *q && *q != ':'; q++) |
| 3220 | ; |
| 3221 | /* Note that the value doesn't matter for |
| 3222 | enum constants in psymtabs, just in |
| 3223 | symtabs. */ |
| 3224 | add_psymbol_to_list (p, q - p, 1, |
| 3225 | VAR_DOMAIN, LOC_CONST, |
| 3226 | &objfile->static_psymbols, |
| 3227 | 0, psymtab_language, |
| 3228 | objfile); |
| 3229 | /* Point past the name. */ |
| 3230 | p = q; |
| 3231 | /* Skip over the value. */ |
| 3232 | while (*p && *p != ',') |
| 3233 | p++; |
| 3234 | /* Advance past the comma. */ |
| 3235 | if (*p) |
| 3236 | p++; |
| 3237 | } |
| 3238 | } |
| 3239 | continue; |
| 3240 | case 'c': |
| 3241 | /* Constant, e.g. from "const" in Pascal. */ |
| 3242 | add_psymbol_to_list (namestring, p - namestring, 1, |
| 3243 | VAR_DOMAIN, LOC_CONST, |
| 3244 | &objfile->static_psymbols, |
| 3245 | 0, psymtab_language, objfile); |
| 3246 | continue; |
| 3247 | |
| 3248 | case 'f': |
| 3249 | if (! pst) |
| 3250 | { |
| 3251 | int name_len = p - namestring; |
| 3252 | char *name = xmalloc (name_len + 1); |
| 3253 | |
| 3254 | memcpy (name, namestring, name_len); |
| 3255 | name[name_len] = '\0'; |
| 3256 | function_outside_compilation_unit_complaint (name); |
| 3257 | xfree (name); |
| 3258 | } |
| 3259 | sh.value += ANOFFSET (objfile->section_offsets, |
| 3260 | SECT_OFF_TEXT (objfile)); |
| 3261 | add_psymbol_to_list (namestring, p - namestring, 1, |
| 3262 | VAR_DOMAIN, LOC_BLOCK, |
| 3263 | &objfile->static_psymbols, |
| 3264 | sh.value, |
| 3265 | psymtab_language, objfile); |
| 3266 | continue; |
| 3267 | |
| 3268 | /* Global functions were ignored here, but now they |
| 3269 | are put into the global psymtab like one would |
| 3270 | expect. They're also in the minimal symbol |
| 3271 | table. */ |
| 3272 | case 'F': |
| 3273 | if (! pst) |
| 3274 | { |
| 3275 | int name_len = p - namestring; |
| 3276 | char *name = xmalloc (name_len + 1); |
| 3277 | |
| 3278 | memcpy (name, namestring, name_len); |
| 3279 | name[name_len] = '\0'; |
| 3280 | function_outside_compilation_unit_complaint (name); |
| 3281 | xfree (name); |
| 3282 | } |
| 3283 | sh.value += ANOFFSET (objfile->section_offsets, |
| 3284 | SECT_OFF_TEXT (objfile)); |
| 3285 | add_psymbol_to_list (namestring, p - namestring, 1, |
| 3286 | VAR_DOMAIN, LOC_BLOCK, |
| 3287 | &objfile->global_psymbols, |
| 3288 | sh.value, |
| 3289 | psymtab_language, objfile); |
| 3290 | continue; |
| 3291 | |
| 3292 | /* Two things show up here (hopefully); static |
| 3293 | symbols of local scope (static used inside |
| 3294 | braces) or extensions of structure symbols. We |
| 3295 | can ignore both. */ |
| 3296 | case 'V': |
| 3297 | case '(': |
| 3298 | case '0': |
| 3299 | case '1': |
| 3300 | case '2': |
| 3301 | case '3': |
| 3302 | case '4': |
| 3303 | case '5': |
| 3304 | case '6': |
| 3305 | case '7': |
| 3306 | case '8': |
| 3307 | case '9': |
| 3308 | case '-': |
| 3309 | case '#': /* For symbol identification (used |
| 3310 | in live ranges). */ |
| 3311 | continue; |
| 3312 | |
| 3313 | case ':': |
| 3314 | /* It is a C++ nested symbol. We don't need to |
| 3315 | record it (I don't think); if we try to look up |
| 3316 | foo::bar::baz, then symbols for the symtab |
| 3317 | containing foo should get read in, I think. */ |
| 3318 | /* Someone says sun cc puts out symbols like |
| 3319 | /foo/baz/maclib::/usr/local/bin/maclib, |
| 3320 | which would get here with a symbol type of ':'. */ |
| 3321 | continue; |
| 3322 | |
| 3323 | default: |
| 3324 | /* Unexpected symbol descriptor. The second and |
| 3325 | subsequent stabs of a continued stab can show up |
| 3326 | here. The question is whether they ever can |
| 3327 | mimic a normal stab--it would be nice if not, |
| 3328 | since we certainly don't want to spend the time |
| 3329 | searching to the end of every string looking for |
| 3330 | a backslash. */ |
| 3331 | |
| 3332 | complaint (&symfile_complaints, |
| 3333 | _("unknown symbol descriptor `%c'"), p[1]); |
| 3334 | |
| 3335 | /* Ignore it; perhaps it is an extension that we don't |
| 3336 | know about. */ |
| 3337 | continue; |
| 3338 | } |
| 3339 | |
| 3340 | case N_EXCL: |
| 3341 | continue; |
| 3342 | |
| 3343 | case N_ENDM: |
| 3344 | /* Solaris 2 end of module, finish current partial |
| 3345 | symbol table. dbx_end_psymtab will set |
| 3346 | pst->texthigh to the proper value, which is |
| 3347 | necessary if a module compiled without |
| 3348 | debugging info follows this module. */ |
| 3349 | if (pst |
| 3350 | && gdbarch_sofun_address_maybe_missing (gdbarch)) |
| 3351 | { |
| 3352 | pst = (struct partial_symtab *) 0; |
| 3353 | includes_used = 0; |
| 3354 | dependencies_used = 0; |
| 3355 | } |
| 3356 | continue; |
| 3357 | |
| 3358 | case N_RBRAC: |
| 3359 | if (sh.value > save_pst->texthigh) |
| 3360 | save_pst->texthigh = sh.value; |
| 3361 | continue; |
| 3362 | case N_EINCL: |
| 3363 | case N_DSLINE: |
| 3364 | case N_BSLINE: |
| 3365 | case N_SSYM: /* Claim: Structure or union |
| 3366 | element. Hopefully, I can |
| 3367 | ignore this. */ |
| 3368 | case N_ENTRY: /* Alternate entry point; can |
| 3369 | ignore. */ |
| 3370 | case N_MAIN: /* Can definitely ignore this. */ |
| 3371 | case N_CATCH: /* These are GNU C++ extensions. */ |
| 3372 | case N_EHDECL: /* that can safely be ignored here. */ |
| 3373 | case N_LENG: |
| 3374 | case N_BCOMM: |
| 3375 | case N_ECOMM: |
| 3376 | case N_ECOML: |
| 3377 | case N_FNAME: |
| 3378 | case N_SLINE: |
| 3379 | case N_RSYM: |
| 3380 | case N_PSYM: |
| 3381 | case N_LBRAC: |
| 3382 | case N_NSYMS: /* Ultrix 4.0: symbol count */ |
| 3383 | case N_DEFD: /* GNU Modula-2 */ |
| 3384 | case N_ALIAS: /* SunPro F77: alias name, ignore |
| 3385 | for now. */ |
| 3386 | |
| 3387 | case N_OBJ: /* Useless types from Solaris. */ |
| 3388 | case N_OPT: |
| 3389 | /* These symbols aren't interesting; don't worry about |
| 3390 | them. */ |
| 3391 | |
| 3392 | continue; |
| 3393 | |
| 3394 | default: |
| 3395 | /* If we haven't found it yet, ignore it. It's |
| 3396 | probably some new type we don't know about yet. */ |
| 3397 | complaint (&symfile_complaints, |
| 3398 | _("unknown symbol type %s"), |
| 3399 | hex_string (type_code)); /* CUR_SYMBOL_TYPE */ |
| 3400 | continue; |
| 3401 | } |
| 3402 | if (stabstring |
| 3403 | && stabstring != debug_info->ss + fh->issBase + sh.iss) |
| 3404 | xfree (stabstring); |
| 3405 | } |
| 3406 | /* end - Handle continuation */ |
| 3407 | } |
| 3408 | } |
| 3409 | else |
| 3410 | { |
| 3411 | for (cur_sdx = 0; cur_sdx < fh->csym;) |
| 3412 | { |
| 3413 | char *name; |
| 3414 | enum address_class theclass; |
| 3415 | CORE_ADDR minsym_value; |
| 3416 | |
| 3417 | (*swap_sym_in) (cur_bfd, |
| 3418 | ((char *) debug_info->external_sym |
| 3419 | + ((fh->isymBase + cur_sdx) |
| 3420 | * external_sym_size)), |
| 3421 | &sh); |
| 3422 | |
| 3423 | if (ECOFF_IS_STAB (&sh)) |
| 3424 | { |
| 3425 | cur_sdx++; |
| 3426 | continue; |
| 3427 | } |
| 3428 | |
| 3429 | /* Non absolute static symbols go into the minimal table. */ |
| 3430 | if (SC_IS_UNDEF (sh.sc) || sh.sc == scNil |
| 3431 | || (sh.index == indexNil |
| 3432 | && (sh.st != stStatic || sh.sc == scAbs))) |
| 3433 | { |
| 3434 | /* FIXME, premature? */ |
| 3435 | cur_sdx++; |
| 3436 | continue; |
| 3437 | } |
| 3438 | |
| 3439 | name = debug_info->ss + fh->issBase + sh.iss; |
| 3440 | |
| 3441 | minsym_value = sh.value; |
| 3442 | |
| 3443 | switch (sh.sc) |
| 3444 | { |
| 3445 | case scText: |
| 3446 | case scRConst: |
| 3447 | /* The value of a stEnd symbol is the displacement from the |
| 3448 | corresponding start symbol value, do not relocate it. */ |
| 3449 | if (sh.st != stEnd) |
| 3450 | sh.value += ANOFFSET (objfile->section_offsets, |
| 3451 | SECT_OFF_TEXT (objfile)); |
| 3452 | break; |
| 3453 | case scData: |
| 3454 | case scSData: |
| 3455 | case scRData: |
| 3456 | case scPData: |
| 3457 | case scXData: |
| 3458 | sh.value += ANOFFSET (objfile->section_offsets, |
| 3459 | SECT_OFF_DATA (objfile)); |
| 3460 | break; |
| 3461 | case scBss: |
| 3462 | case scSBss: |
| 3463 | sh.value += ANOFFSET (objfile->section_offsets, |
| 3464 | SECT_OFF_BSS (objfile)); |
| 3465 | break; |
| 3466 | } |
| 3467 | |
| 3468 | switch (sh.st) |
| 3469 | { |
| 3470 | CORE_ADDR high; |
| 3471 | CORE_ADDR procaddr; |
| 3472 | int new_sdx; |
| 3473 | |
| 3474 | case stStaticProc: |
| 3475 | prim_record_minimal_symbol_and_info (name, minsym_value, |
| 3476 | mst_file_text, |
| 3477 | SECT_OFF_TEXT (objfile), |
| 3478 | objfile); |
| 3479 | |
| 3480 | /* FALLTHROUGH */ |
| 3481 | |
| 3482 | case stProc: |
| 3483 | /* Ignore all parameter symbol records. */ |
| 3484 | if (sh.index >= hdr->iauxMax) |
| 3485 | { |
| 3486 | /* Should not happen, but does when cross-compiling |
| 3487 | with the MIPS compiler. FIXME -- pull later. */ |
| 3488 | index_complaint (name); |
| 3489 | new_sdx = cur_sdx + 1; /* Don't skip at all. */ |
| 3490 | } |
| 3491 | else |
| 3492 | new_sdx = AUX_GET_ISYM (fh->fBigendian, |
| 3493 | (debug_info->external_aux |
| 3494 | + fh->iauxBase |
| 3495 | + sh.index)); |
| 3496 | |
| 3497 | if (new_sdx <= cur_sdx) |
| 3498 | { |
| 3499 | /* This should not happen either... FIXME. */ |
| 3500 | complaint (&symfile_complaints, |
| 3501 | _("bad proc end in aux found from symbol %s"), |
| 3502 | name); |
| 3503 | new_sdx = cur_sdx + 1; /* Don't skip backward. */ |
| 3504 | } |
| 3505 | |
| 3506 | /* For stProc symbol records, we need to check the |
| 3507 | storage class as well, as only (stProc, scText) |
| 3508 | entries represent "real" procedures - See the |
| 3509 | Compaq document titled "Object File / Symbol Table |
| 3510 | Format Specification" for more information. If the |
| 3511 | storage class is not scText, we discard the whole |
| 3512 | block of symbol records for this stProc. */ |
| 3513 | if (sh.st == stProc && sh.sc != scText) |
| 3514 | goto skip; |
| 3515 | |
| 3516 | /* Usually there is a local and a global stProc symbol |
| 3517 | for a function. This means that the function name |
| 3518 | has already been entered into the mimimal symbol table |
| 3519 | while processing the global symbols in pass 2 above. |
| 3520 | One notable exception is the PROGRAM name from |
| 3521 | f77 compiled executables, it is only put out as |
| 3522 | local stProc symbol, and a global MAIN__ stProc symbol |
| 3523 | points to it. It doesn't matter though, as gdb is |
| 3524 | still able to find the PROGRAM name via the partial |
| 3525 | symbol table, and the MAIN__ symbol via the minimal |
| 3526 | symbol table. */ |
| 3527 | if (sh.st == stProc) |
| 3528 | add_psymbol_to_list (name, strlen (name), 1, |
| 3529 | VAR_DOMAIN, LOC_BLOCK, |
| 3530 | &objfile->global_psymbols, |
| 3531 | sh.value, psymtab_language, objfile); |
| 3532 | else |
| 3533 | add_psymbol_to_list (name, strlen (name), 1, |
| 3534 | VAR_DOMAIN, LOC_BLOCK, |
| 3535 | &objfile->static_psymbols, |
| 3536 | sh.value, psymtab_language, objfile); |
| 3537 | |
| 3538 | procaddr = sh.value; |
| 3539 | |
| 3540 | cur_sdx = new_sdx; |
| 3541 | (*swap_sym_in) (cur_bfd, |
| 3542 | ((char *) debug_info->external_sym |
| 3543 | + ((fh->isymBase + cur_sdx - 1) |
| 3544 | * external_sym_size)), |
| 3545 | &sh); |
| 3546 | if (sh.st != stEnd) |
| 3547 | continue; |
| 3548 | |
| 3549 | /* Kludge for Irix 5.2 zero fh->adr. */ |
| 3550 | if (!relocatable |
| 3551 | && (pst->textlow == 0 || procaddr < pst->textlow)) |
| 3552 | pst->textlow = procaddr; |
| 3553 | |
| 3554 | high = procaddr + sh.value; |
| 3555 | if (high > pst->texthigh) |
| 3556 | pst->texthigh = high; |
| 3557 | continue; |
| 3558 | |
| 3559 | case stStatic: /* Variable */ |
| 3560 | if (SC_IS_DATA (sh.sc)) |
| 3561 | prim_record_minimal_symbol_and_info (name, minsym_value, |
| 3562 | mst_file_data, |
| 3563 | SECT_OFF_DATA (objfile), |
| 3564 | objfile); |
| 3565 | else |
| 3566 | prim_record_minimal_symbol_and_info (name, minsym_value, |
| 3567 | mst_file_bss, |
| 3568 | SECT_OFF_BSS (objfile), |
| 3569 | objfile); |
| 3570 | theclass = LOC_STATIC; |
| 3571 | break; |
| 3572 | |
| 3573 | case stIndirect: /* Irix5 forward declaration */ |
| 3574 | /* Skip forward declarations from Irix5 cc. */ |
| 3575 | goto skip; |
| 3576 | |
| 3577 | case stTypedef: /* Typedef */ |
| 3578 | /* Skip typedefs for forward declarations and opaque |
| 3579 | structs from alpha and mips cc. */ |
| 3580 | if (sh.iss == 0 || has_opaque_xref (fh, &sh)) |
| 3581 | goto skip; |
| 3582 | theclass = LOC_TYPEDEF; |
| 3583 | break; |
| 3584 | |
| 3585 | case stConstant: /* Constant decl */ |
| 3586 | theclass = LOC_CONST; |
| 3587 | break; |
| 3588 | |
| 3589 | case stUnion: |
| 3590 | case stStruct: |
| 3591 | case stEnum: |
| 3592 | case stBlock: /* { }, str, un, enum */ |
| 3593 | /* Do not create a partial symbol for cc unnamed aggregates |
| 3594 | and gcc empty aggregates. */ |
| 3595 | if ((sh.sc == scInfo |
| 3596 | || SC_IS_COMMON (sh.sc)) |
| 3597 | && sh.iss != 0 |
| 3598 | && sh.index != cur_sdx + 2) |
| 3599 | { |
| 3600 | add_psymbol_to_list (name, strlen (name), 1, |
| 3601 | STRUCT_DOMAIN, LOC_TYPEDEF, |
| 3602 | &objfile->static_psymbols, |
| 3603 | 0, psymtab_language, objfile); |
| 3604 | } |
| 3605 | handle_psymbol_enumerators (objfile, fh, sh.st, sh.value); |
| 3606 | |
| 3607 | /* Skip over the block. */ |
| 3608 | new_sdx = sh.index; |
| 3609 | if (new_sdx <= cur_sdx) |
| 3610 | { |
| 3611 | /* This happens with the Ultrix kernel. */ |
| 3612 | complaint (&symfile_complaints, |
| 3613 | _("bad aux index at block symbol %s"), name); |
| 3614 | new_sdx = cur_sdx + 1; /* Don't skip backward. */ |
| 3615 | } |
| 3616 | cur_sdx = new_sdx; |
| 3617 | continue; |
| 3618 | |
| 3619 | case stFile: /* File headers */ |
| 3620 | case stLabel: /* Labels */ |
| 3621 | case stEnd: /* Ends of files */ |
| 3622 | goto skip; |
| 3623 | |
| 3624 | case stLocal: /* Local variables */ |
| 3625 | /* Normally these are skipped because we skip over |
| 3626 | all blocks we see. However, these can occur |
| 3627 | as visible symbols in a .h file that contains code. */ |
| 3628 | goto skip; |
| 3629 | |
| 3630 | default: |
| 3631 | /* Both complaints are valid: one gives symbol name, |
| 3632 | the other the offending symbol type. */ |
| 3633 | complaint (&symfile_complaints, _("unknown local symbol %s"), |
| 3634 | name); |
| 3635 | complaint (&symfile_complaints, _("with type %d"), sh.st); |
| 3636 | cur_sdx++; |
| 3637 | continue; |
| 3638 | } |
| 3639 | /* Use this gdb symbol. */ |
| 3640 | add_psymbol_to_list (name, strlen (name), 1, |
| 3641 | VAR_DOMAIN, theclass, |
| 3642 | &objfile->static_psymbols, |
| 3643 | sh.value, psymtab_language, objfile); |
| 3644 | skip: |
| 3645 | cur_sdx++; /* Go to next file symbol. */ |
| 3646 | } |
| 3647 | |
| 3648 | /* Now do enter the external symbols. */ |
| 3649 | ext_ptr = &extern_tab[fdr_to_pst[f_idx].globals_offset]; |
| 3650 | cur_sdx = fdr_to_pst[f_idx].n_globals; |
| 3651 | PST_PRIVATE (save_pst)->extern_count = cur_sdx; |
| 3652 | PST_PRIVATE (save_pst)->extern_tab = ext_ptr; |
| 3653 | for (; --cur_sdx >= 0; ext_ptr++) |
| 3654 | { |
| 3655 | enum address_class theclass; |
| 3656 | SYMR *psh; |
| 3657 | char *name; |
| 3658 | CORE_ADDR svalue; |
| 3659 | |
| 3660 | if (ext_ptr->ifd != f_idx) |
| 3661 | internal_error (__FILE__, __LINE__, |
| 3662 | _("failed internal consistency check")); |
| 3663 | psh = &ext_ptr->asym; |
| 3664 | |
| 3665 | /* Do not add undefined symbols to the partial symbol table. */ |
| 3666 | if (SC_IS_UNDEF (psh->sc) || psh->sc == scNil) |
| 3667 | continue; |
| 3668 | |
| 3669 | svalue = psh->value; |
| 3670 | switch (psh->sc) |
| 3671 | { |
| 3672 | case scText: |
| 3673 | case scRConst: |
| 3674 | svalue += ANOFFSET (objfile->section_offsets, |
| 3675 | SECT_OFF_TEXT (objfile)); |
| 3676 | break; |
| 3677 | case scData: |
| 3678 | case scSData: |
| 3679 | case scRData: |
| 3680 | case scPData: |
| 3681 | case scXData: |
| 3682 | svalue += ANOFFSET (objfile->section_offsets, |
| 3683 | SECT_OFF_DATA (objfile)); |
| 3684 | break; |
| 3685 | case scBss: |
| 3686 | case scSBss: |
| 3687 | svalue += ANOFFSET (objfile->section_offsets, |
| 3688 | SECT_OFF_BSS (objfile)); |
| 3689 | break; |
| 3690 | } |
| 3691 | |
| 3692 | switch (psh->st) |
| 3693 | { |
| 3694 | case stNil: |
| 3695 | /* These are generated for static symbols in .o files, |
| 3696 | ignore them. */ |
| 3697 | continue; |
| 3698 | case stProc: |
| 3699 | case stStaticProc: |
| 3700 | /* External procedure symbols have been entered |
| 3701 | into the minimal symbol table in pass 2 above. |
| 3702 | Ignore them, as parse_external will ignore them too. */ |
| 3703 | continue; |
| 3704 | case stLabel: |
| 3705 | theclass = LOC_LABEL; |
| 3706 | break; |
| 3707 | default: |
| 3708 | unknown_ext_complaint (debug_info->ssext + psh->iss); |
| 3709 | /* Fall through, pretend it's global. */ |
| 3710 | case stGlobal: |
| 3711 | /* Global common symbols are resolved by the runtime loader, |
| 3712 | ignore them. */ |
| 3713 | if (SC_IS_COMMON (psh->sc)) |
| 3714 | continue; |
| 3715 | |
| 3716 | theclass = LOC_STATIC; |
| 3717 | break; |
| 3718 | } |
| 3719 | name = debug_info->ssext + psh->iss; |
| 3720 | add_psymbol_to_list (name, strlen (name), 1, |
| 3721 | VAR_DOMAIN, theclass, |
| 3722 | &objfile->global_psymbols, |
| 3723 | svalue, psymtab_language, objfile); |
| 3724 | } |
| 3725 | } |
| 3726 | |
| 3727 | /* Link pst to FDR. dbx_end_psymtab returns NULL if the psymtab was |
| 3728 | empty and put on the free list. */ |
| 3729 | fdr_to_pst[f_idx].pst |
| 3730 | = dbx_end_psymtab (objfile, save_pst, |
| 3731 | psymtab_include_list, includes_used, |
| 3732 | -1, save_pst->texthigh, |
| 3733 | dependency_list, dependencies_used, |
| 3734 | textlow_not_set); |
| 3735 | includes_used = 0; |
| 3736 | dependencies_used = 0; |
| 3737 | |
| 3738 | /* The objfile has its functions reordered if this partial symbol |
| 3739 | table overlaps any other partial symbol table. |
| 3740 | We cannot assume a reordered objfile if a partial symbol table |
| 3741 | is contained within another partial symbol table, as partial symbol |
| 3742 | tables for include files with executable code are contained |
| 3743 | within the partial symbol table for the including source file, |
| 3744 | and we do not want to flag the objfile reordered for these cases. |
| 3745 | |
| 3746 | This strategy works well for Irix-5.2 shared libraries, but we |
| 3747 | might have to use a more elaborate (and slower) algorithm for |
| 3748 | other cases. */ |
| 3749 | save_pst = fdr_to_pst[f_idx].pst; |
| 3750 | if (save_pst != NULL |
| 3751 | && save_pst->textlow != 0 |
| 3752 | && !(objfile->flags & OBJF_REORDERED)) |
| 3753 | { |
| 3754 | ALL_OBJFILE_PSYMTABS (objfile, pst) |
| 3755 | { |
| 3756 | if (save_pst != pst |
| 3757 | && save_pst->textlow >= pst->textlow |
| 3758 | && save_pst->textlow < pst->texthigh |
| 3759 | && save_pst->texthigh > pst->texthigh) |
| 3760 | { |
| 3761 | objfile->flags |= OBJF_REORDERED; |
| 3762 | break; |
| 3763 | } |
| 3764 | } |
| 3765 | } |
| 3766 | } |
| 3767 | |
| 3768 | /* Now scan the FDRs for dependencies. */ |
| 3769 | for (f_idx = 0; f_idx < hdr->ifdMax; f_idx++) |
| 3770 | { |
| 3771 | fh = f_idx + debug_info->fdr; |
| 3772 | pst = fdr_to_pst[f_idx].pst; |
| 3773 | |
| 3774 | if (pst == (struct partial_symtab *) NULL) |
| 3775 | continue; |
| 3776 | |
| 3777 | /* This should catch stabs-in-ecoff. */ |
| 3778 | if (fh->crfd <= 1) |
| 3779 | continue; |
| 3780 | |
| 3781 | /* Skip the first file indirect entry as it is a self dependency for |
| 3782 | source files or a reverse .h -> .c dependency for header files. */ |
| 3783 | pst->number_of_dependencies = 0; |
| 3784 | pst->dependencies = |
| 3785 | ((struct partial_symtab **) |
| 3786 | obstack_alloc (&objfile->objfile_obstack, |
| 3787 | ((fh->crfd - 1) |
| 3788 | * sizeof (struct partial_symtab *)))); |
| 3789 | for (s_idx = 1; s_idx < fh->crfd; s_idx++) |
| 3790 | { |
| 3791 | RFDT rh; |
| 3792 | |
| 3793 | (*swap_rfd_in) (cur_bfd, |
| 3794 | ((char *) debug_info->external_rfd |
| 3795 | + (fh->rfdBase + s_idx) * external_rfd_size), |
| 3796 | &rh); |
| 3797 | if (rh < 0 || rh >= hdr->ifdMax) |
| 3798 | { |
| 3799 | complaint (&symfile_complaints, _("bad file number %ld"), rh); |
| 3800 | continue; |
| 3801 | } |
| 3802 | |
| 3803 | /* Skip self dependencies of header files. */ |
| 3804 | if (rh == f_idx) |
| 3805 | continue; |
| 3806 | |
| 3807 | /* Do not add to dependeny list if psymtab was empty. */ |
| 3808 | if (fdr_to_pst[rh].pst == (struct partial_symtab *) NULL) |
| 3809 | continue; |
| 3810 | pst->dependencies[pst->number_of_dependencies++] |
| 3811 | = fdr_to_pst[rh].pst; |
| 3812 | } |
| 3813 | } |
| 3814 | |
| 3815 | /* Remove the dummy psymtab created for -O3 images above, if it is |
| 3816 | still empty, to enable the detection of stripped executables. */ |
| 3817 | if (objfile->psymtabs->next == NULL |
| 3818 | && objfile->psymtabs->number_of_dependencies == 0 |
| 3819 | && objfile->psymtabs->n_global_syms == 0 |
| 3820 | && objfile->psymtabs->n_static_syms == 0) |
| 3821 | objfile->psymtabs = NULL; |
| 3822 | do_cleanups (old_chain); |
| 3823 | } |
| 3824 | |
| 3825 | /* If the current psymbol has an enumerated type, we need to add |
| 3826 | all the enum constants to the partial symbol table. */ |
| 3827 | |
| 3828 | static void |
| 3829 | handle_psymbol_enumerators (struct objfile *objfile, FDR *fh, int stype, |
| 3830 | CORE_ADDR svalue) |
| 3831 | { |
| 3832 | const bfd_size_type external_sym_size = debug_swap->external_sym_size; |
| 3833 | void (*const swap_sym_in) (bfd *, void *, SYMR *) = debug_swap->swap_sym_in; |
| 3834 | char *ext_sym = ((char *) debug_info->external_sym |
| 3835 | + ((fh->isymBase + cur_sdx + 1) * external_sym_size)); |
| 3836 | SYMR sh; |
| 3837 | TIR tir; |
| 3838 | |
| 3839 | switch (stype) |
| 3840 | { |
| 3841 | case stEnum: |
| 3842 | break; |
| 3843 | |
| 3844 | case stBlock: |
| 3845 | /* It is an enumerated type if the next symbol entry is a stMember |
| 3846 | and its auxiliary index is indexNil or its auxiliary entry |
| 3847 | is a plain btNil or btVoid. |
| 3848 | Alpha cc -migrate enums are recognized by a zero index and |
| 3849 | a zero symbol value. |
| 3850 | DU 4.0 cc enums are recognized by a member type of btEnum without |
| 3851 | qualifiers and a zero symbol value. */ |
| 3852 | (*swap_sym_in) (cur_bfd, ext_sym, &sh); |
| 3853 | if (sh.st != stMember) |
| 3854 | return; |
| 3855 | |
| 3856 | if (sh.index == indexNil |
| 3857 | || (sh.index == 0 && svalue == 0)) |
| 3858 | break; |
| 3859 | (*debug_swap->swap_tir_in) (fh->fBigendian, |
| 3860 | &(debug_info->external_aux |
| 3861 | + fh->iauxBase + sh.index)->a_ti, |
| 3862 | &tir); |
| 3863 | if ((tir.bt != btNil |
| 3864 | && tir.bt != btVoid |
| 3865 | && (tir.bt != btEnum || svalue != 0)) |
| 3866 | || tir.tq0 != tqNil) |
| 3867 | return; |
| 3868 | break; |
| 3869 | |
| 3870 | default: |
| 3871 | return; |
| 3872 | } |
| 3873 | |
| 3874 | for (;;) |
| 3875 | { |
| 3876 | char *name; |
| 3877 | |
| 3878 | (*swap_sym_in) (cur_bfd, ext_sym, &sh); |
| 3879 | if (sh.st != stMember) |
| 3880 | break; |
| 3881 | name = debug_info->ss + cur_fdr->issBase + sh.iss; |
| 3882 | |
| 3883 | /* Note that the value doesn't matter for enum constants |
| 3884 | in psymtabs, just in symtabs. */ |
| 3885 | add_psymbol_to_list (name, strlen (name), 1, |
| 3886 | VAR_DOMAIN, LOC_CONST, |
| 3887 | &objfile->static_psymbols, |
| 3888 | 0, psymtab_language, objfile); |
| 3889 | ext_sym += external_sym_size; |
| 3890 | } |
| 3891 | } |
| 3892 | |
| 3893 | /* Get the next symbol. OBJFILE is unused. */ |
| 3894 | |
| 3895 | static char * |
| 3896 | mdebug_next_symbol_text (struct objfile *objfile) |
| 3897 | { |
| 3898 | SYMR sh; |
| 3899 | |
| 3900 | cur_sdx++; |
| 3901 | (*debug_swap->swap_sym_in) (cur_bfd, |
| 3902 | ((char *) debug_info->external_sym |
| 3903 | + ((cur_fdr->isymBase + cur_sdx) |
| 3904 | * debug_swap->external_sym_size)), |
| 3905 | &sh); |
| 3906 | return debug_info->ss + cur_fdr->issBase + sh.iss; |
| 3907 | } |
| 3908 | |
| 3909 | /* Ancillary function to psymtab_to_symtab(). Does all the work |
| 3910 | for turning the partial symtab PST into a symtab, recurring |
| 3911 | first on all dependent psymtabs. The argument FILENAME is |
| 3912 | only passed so we can see in debug stack traces what file |
| 3913 | is being read. |
| 3914 | |
| 3915 | This function has a split personality, based on whether the |
| 3916 | symbol table contains ordinary ecoff symbols, or stabs-in-ecoff. |
| 3917 | The flow of control and even the memory allocation differs. FIXME. */ |
| 3918 | |
| 3919 | static void |
| 3920 | psymtab_to_symtab_1 (struct objfile *objfile, |
| 3921 | struct partial_symtab *pst, const char *filename) |
| 3922 | { |
| 3923 | bfd_size_type external_sym_size; |
| 3924 | bfd_size_type external_pdr_size; |
| 3925 | void (*swap_sym_in) (bfd *, void *, SYMR *); |
| 3926 | void (*swap_pdr_in) (bfd *, void *, PDR *); |
| 3927 | int i; |
| 3928 | struct compunit_symtab *cust = NULL; |
| 3929 | FDR *fh; |
| 3930 | struct linetable *lines; |
| 3931 | CORE_ADDR lowest_pdr_addr = 0; |
| 3932 | int last_symtab_ended = 0; |
| 3933 | struct section_offsets *section_offsets = objfile->section_offsets; |
| 3934 | |
| 3935 | if (pst->readin) |
| 3936 | return; |
| 3937 | pst->readin = 1; |
| 3938 | |
| 3939 | /* Read in all partial symbtabs on which this one is dependent. |
| 3940 | NOTE that we do have circular dependencies, sigh. We solved |
| 3941 | that by setting pst->readin before this point. */ |
| 3942 | |
| 3943 | for (i = 0; i < pst->number_of_dependencies; i++) |
| 3944 | if (!pst->dependencies[i]->readin) |
| 3945 | { |
| 3946 | /* Inform about additional files to be read in. */ |
| 3947 | if (info_verbose) |
| 3948 | { |
| 3949 | fputs_filtered (" ", gdb_stdout); |
| 3950 | wrap_here (""); |
| 3951 | fputs_filtered ("and ", gdb_stdout); |
| 3952 | wrap_here (""); |
| 3953 | printf_filtered ("%s...", |
| 3954 | pst->dependencies[i]->filename); |
| 3955 | wrap_here (""); /* Flush output */ |
| 3956 | gdb_flush (gdb_stdout); |
| 3957 | } |
| 3958 | /* We only pass the filename for debug purposes. */ |
| 3959 | psymtab_to_symtab_1 (objfile, pst->dependencies[i], |
| 3960 | pst->dependencies[i]->filename); |
| 3961 | } |
| 3962 | |
| 3963 | /* Do nothing if this is a dummy psymtab. */ |
| 3964 | |
| 3965 | if (pst->n_global_syms == 0 && pst->n_static_syms == 0 |
| 3966 | && pst->textlow == 0 && pst->texthigh == 0) |
| 3967 | return; |
| 3968 | |
| 3969 | /* Now read the symbols for this symtab. */ |
| 3970 | |
| 3971 | cur_bfd = CUR_BFD (pst); |
| 3972 | debug_swap = DEBUG_SWAP (pst); |
| 3973 | debug_info = DEBUG_INFO (pst); |
| 3974 | pending_list = PENDING_LIST (pst); |
| 3975 | external_sym_size = debug_swap->external_sym_size; |
| 3976 | external_pdr_size = debug_swap->external_pdr_size; |
| 3977 | swap_sym_in = debug_swap->swap_sym_in; |
| 3978 | swap_pdr_in = debug_swap->swap_pdr_in; |
| 3979 | mdebugread_objfile = objfile; |
| 3980 | cur_fd = FDR_IDX (pst); |
| 3981 | fh = ((cur_fd == -1) |
| 3982 | ? (FDR *) NULL |
| 3983 | : debug_info->fdr + cur_fd); |
| 3984 | cur_fdr = fh; |
| 3985 | |
| 3986 | /* See comment in parse_partial_symbols about the @stabs sentinel. */ |
| 3987 | processing_gcc_compilation = 0; |
| 3988 | if (fh != (FDR *) NULL && fh->csym >= 2) |
| 3989 | { |
| 3990 | SYMR sh; |
| 3991 | |
| 3992 | (*swap_sym_in) (cur_bfd, |
| 3993 | ((char *) debug_info->external_sym |
| 3994 | + (fh->isymBase + 1) * external_sym_size), |
| 3995 | &sh); |
| 3996 | if (strcmp (debug_info->ss + fh->issBase + sh.iss, |
| 3997 | stabs_symbol) == 0) |
| 3998 | { |
| 3999 | /* We indicate that this is a GCC compilation so that certain |
| 4000 | features will be enabled in stabsread/dbxread. */ |
| 4001 | processing_gcc_compilation = 2; |
| 4002 | } |
| 4003 | } |
| 4004 | |
| 4005 | if (processing_gcc_compilation != 0) |
| 4006 | { |
| 4007 | struct gdbarch *gdbarch = get_objfile_arch (objfile); |
| 4008 | |
| 4009 | /* This symbol table contains stabs-in-ecoff entries. */ |
| 4010 | |
| 4011 | /* Parse local symbols first. */ |
| 4012 | |
| 4013 | if (fh->csym <= 2) /* FIXME, this blows psymtab->symtab ptr. */ |
| 4014 | { |
| 4015 | mdebugread_objfile = NULL; |
| 4016 | return; |
| 4017 | } |
| 4018 | for (cur_sdx = 2; cur_sdx < fh->csym; cur_sdx++) |
| 4019 | { |
| 4020 | SYMR sh; |
| 4021 | char *name; |
| 4022 | CORE_ADDR valu; |
| 4023 | |
| 4024 | (*swap_sym_in) (cur_bfd, |
| 4025 | (((char *) debug_info->external_sym) |
| 4026 | + (fh->isymBase + cur_sdx) * external_sym_size), |
| 4027 | &sh); |
| 4028 | name = debug_info->ss + fh->issBase + sh.iss; |
| 4029 | valu = sh.value; |
| 4030 | /* XXX This is a hack. It will go away! */ |
| 4031 | if (ECOFF_IS_STAB (&sh) || (name[0] == '#')) |
| 4032 | { |
| 4033 | int type_code = ECOFF_UNMARK_STAB (sh.index); |
| 4034 | |
| 4035 | /* We should never get non N_STAB symbols here, but they |
| 4036 | should be harmless, so keep process_one_symbol from |
| 4037 | complaining about them. */ |
| 4038 | if (type_code & N_STAB) |
| 4039 | { |
| 4040 | /* If we found a trailing N_SO with no name, process |
| 4041 | it here instead of in process_one_symbol, so we |
| 4042 | can keep a handle to its symtab. The symtab |
| 4043 | would otherwise be ended twice, once in |
| 4044 | process_one_symbol, and once after this loop. */ |
| 4045 | if (type_code == N_SO |
| 4046 | && get_last_source_file () |
| 4047 | && previous_stab_code != (unsigned char) N_SO |
| 4048 | && *name == '\000') |
| 4049 | { |
| 4050 | valu += ANOFFSET (section_offsets, |
| 4051 | SECT_OFF_TEXT (objfile)); |
| 4052 | previous_stab_code = N_SO; |
| 4053 | cust = end_symtab (valu, SECT_OFF_TEXT (objfile)); |
| 4054 | end_stabs (); |
| 4055 | last_symtab_ended = 1; |
| 4056 | } |
| 4057 | else |
| 4058 | { |
| 4059 | last_symtab_ended = 0; |
| 4060 | process_one_symbol (type_code, 0, valu, name, |
| 4061 | section_offsets, objfile); |
| 4062 | } |
| 4063 | } |
| 4064 | /* Similarly a hack. */ |
| 4065 | else if (name[0] == '#') |
| 4066 | { |
| 4067 | process_one_symbol (N_SLINE, 0, valu, name, |
| 4068 | section_offsets, objfile); |
| 4069 | } |
| 4070 | if (type_code == N_FUN) |
| 4071 | { |
| 4072 | /* Make up special symbol to contain |
| 4073 | procedure specific info. */ |
| 4074 | struct mdebug_extra_func_info *e = |
| 4075 | ((struct mdebug_extra_func_info *) |
| 4076 | obstack_alloc (&mdebugread_objfile->objfile_obstack, |
| 4077 | sizeof (struct mdebug_extra_func_info))); |
| 4078 | struct symbol *s = new_symbol (MDEBUG_EFI_SYMBOL_NAME); |
| 4079 | |
| 4080 | memset (e, 0, sizeof (struct mdebug_extra_func_info)); |
| 4081 | SYMBOL_DOMAIN (s) = LABEL_DOMAIN; |
| 4082 | SYMBOL_ACLASS_INDEX (s) = LOC_CONST; |
| 4083 | SYMBOL_TYPE (s) = objfile_type (objfile)->builtin_void; |
| 4084 | SYMBOL_VALUE_BYTES (s) = (gdb_byte *) e; |
| 4085 | e->pdr.framereg = -1; |
| 4086 | add_symbol_to_list (s, &local_symbols); |
| 4087 | } |
| 4088 | } |
| 4089 | else if (sh.st == stLabel) |
| 4090 | { |
| 4091 | if (sh.index == indexNil) |
| 4092 | { |
| 4093 | /* This is what the gcc2_compiled and __gnu_compiled_* |
| 4094 | show up as. So don't complain. */ |
| 4095 | ; |
| 4096 | } |
| 4097 | else |
| 4098 | { |
| 4099 | /* Handle encoded stab line number. */ |
| 4100 | valu += ANOFFSET (section_offsets, |
| 4101 | SECT_OFF_TEXT (objfile)); |
| 4102 | record_line (current_subfile, sh.index, |
| 4103 | gdbarch_addr_bits_remove (gdbarch, valu)); |
| 4104 | } |
| 4105 | } |
| 4106 | else if (sh.st == stProc || sh.st == stStaticProc |
| 4107 | || sh.st == stStatic || sh.st == stEnd) |
| 4108 | /* These are generated by gcc-2.x, do not complain. */ |
| 4109 | ; |
| 4110 | else |
| 4111 | complaint (&symfile_complaints, |
| 4112 | _("unknown stabs symbol %s"), name); |
| 4113 | } |
| 4114 | |
| 4115 | if (! last_symtab_ended) |
| 4116 | { |
| 4117 | cust = end_symtab (pst->texthigh, SECT_OFF_TEXT (objfile)); |
| 4118 | end_stabs (); |
| 4119 | } |
| 4120 | |
| 4121 | /* There used to be a call to sort_blocks here, but this should not |
| 4122 | be necessary for stabs symtabs. And as sort_blocks modifies the |
| 4123 | start address of the GLOBAL_BLOCK to the FIRST_LOCAL_BLOCK, |
| 4124 | it did the wrong thing if the first procedure in a file was |
| 4125 | generated via asm statements. */ |
| 4126 | |
| 4127 | /* Fill in procedure info next. */ |
| 4128 | if (fh->cpd > 0) |
| 4129 | { |
| 4130 | PDR *pr_block; |
| 4131 | struct cleanup *old_chain; |
| 4132 | char *pdr_ptr; |
| 4133 | char *pdr_end; |
| 4134 | PDR *pdr_in; |
| 4135 | PDR *pdr_in_end; |
| 4136 | |
| 4137 | pr_block = XNEWVEC (PDR, fh->cpd); |
| 4138 | old_chain = make_cleanup (xfree, pr_block); |
| 4139 | |
| 4140 | pdr_ptr = ((char *) debug_info->external_pdr |
| 4141 | + fh->ipdFirst * external_pdr_size); |
| 4142 | pdr_end = pdr_ptr + fh->cpd * external_pdr_size; |
| 4143 | pdr_in = pr_block; |
| 4144 | for (; |
| 4145 | pdr_ptr < pdr_end; |
| 4146 | pdr_ptr += external_pdr_size, pdr_in++) |
| 4147 | { |
| 4148 | (*swap_pdr_in) (cur_bfd, pdr_ptr, pdr_in); |
| 4149 | |
| 4150 | /* Determine lowest PDR address, the PDRs are not always |
| 4151 | sorted. */ |
| 4152 | if (pdr_in == pr_block) |
| 4153 | lowest_pdr_addr = pdr_in->adr; |
| 4154 | else if (pdr_in->adr < lowest_pdr_addr) |
| 4155 | lowest_pdr_addr = pdr_in->adr; |
| 4156 | } |
| 4157 | |
| 4158 | pdr_in = pr_block; |
| 4159 | pdr_in_end = pdr_in + fh->cpd; |
| 4160 | for (; pdr_in < pdr_in_end; pdr_in++) |
| 4161 | parse_procedure (pdr_in, cust, pst); |
| 4162 | |
| 4163 | do_cleanups (old_chain); |
| 4164 | } |
| 4165 | } |
| 4166 | else |
| 4167 | { |
| 4168 | /* This symbol table contains ordinary ecoff entries. */ |
| 4169 | |
| 4170 | int maxlines, size; |
| 4171 | EXTR *ext_ptr; |
| 4172 | |
| 4173 | if (fh == 0) |
| 4174 | { |
| 4175 | maxlines = 0; |
| 4176 | cust = new_symtab ("unknown", 0, objfile); |
| 4177 | } |
| 4178 | else |
| 4179 | { |
| 4180 | maxlines = 2 * fh->cline; |
| 4181 | cust = new_symtab (pst->filename, maxlines, objfile); |
| 4182 | |
| 4183 | /* The proper language was already determined when building |
| 4184 | the psymtab, use it. */ |
| 4185 | COMPUNIT_FILETABS (cust)->language = PST_PRIVATE (pst)->pst_language; |
| 4186 | } |
| 4187 | |
| 4188 | psymtab_language = COMPUNIT_FILETABS (cust)->language; |
| 4189 | |
| 4190 | lines = SYMTAB_LINETABLE (COMPUNIT_FILETABS (cust)); |
| 4191 | |
| 4192 | /* Get a new lexical context. */ |
| 4193 | |
| 4194 | push_parse_stack (); |
| 4195 | top_stack->cur_st = COMPUNIT_FILETABS (cust); |
| 4196 | top_stack->cur_block |
| 4197 | = BLOCKVECTOR_BLOCK (COMPUNIT_BLOCKVECTOR (cust), STATIC_BLOCK); |
| 4198 | BLOCK_START (top_stack->cur_block) = pst->textlow; |
| 4199 | BLOCK_END (top_stack->cur_block) = 0; |
| 4200 | top_stack->blocktype = stFile; |
| 4201 | top_stack->cur_type = 0; |
| 4202 | top_stack->procadr = 0; |
| 4203 | top_stack->numargs = 0; |
| 4204 | found_ecoff_debugging_info = 0; |
| 4205 | |
| 4206 | if (fh) |
| 4207 | { |
| 4208 | char *sym_ptr; |
| 4209 | char *sym_end; |
| 4210 | |
| 4211 | /* Parse local symbols first. */ |
| 4212 | sym_ptr = ((char *) debug_info->external_sym |
| 4213 | + fh->isymBase * external_sym_size); |
| 4214 | sym_end = sym_ptr + fh->csym * external_sym_size; |
| 4215 | while (sym_ptr < sym_end) |
| 4216 | { |
| 4217 | SYMR sh; |
| 4218 | int c; |
| 4219 | |
| 4220 | (*swap_sym_in) (cur_bfd, sym_ptr, &sh); |
| 4221 | c = parse_symbol (&sh, |
| 4222 | debug_info->external_aux + fh->iauxBase, |
| 4223 | sym_ptr, fh->fBigendian, |
| 4224 | section_offsets, objfile); |
| 4225 | sym_ptr += c * external_sym_size; |
| 4226 | } |
| 4227 | |
| 4228 | /* Linenumbers. At the end, check if we can save memory. |
| 4229 | parse_lines has to look ahead an arbitrary number of PDR |
| 4230 | structures, so we swap them all first. */ |
| 4231 | if (fh->cpd > 0) |
| 4232 | { |
| 4233 | PDR *pr_block; |
| 4234 | struct cleanup *old_chain; |
| 4235 | char *pdr_ptr; |
| 4236 | char *pdr_end; |
| 4237 | PDR *pdr_in; |
| 4238 | PDR *pdr_in_end; |
| 4239 | |
| 4240 | pr_block = XNEWVEC (PDR, fh->cpd); |
| 4241 | |
| 4242 | old_chain = make_cleanup (xfree, pr_block); |
| 4243 | |
| 4244 | pdr_ptr = ((char *) debug_info->external_pdr |
| 4245 | + fh->ipdFirst * external_pdr_size); |
| 4246 | pdr_end = pdr_ptr + fh->cpd * external_pdr_size; |
| 4247 | pdr_in = pr_block; |
| 4248 | for (; |
| 4249 | pdr_ptr < pdr_end; |
| 4250 | pdr_ptr += external_pdr_size, pdr_in++) |
| 4251 | { |
| 4252 | (*swap_pdr_in) (cur_bfd, pdr_ptr, pdr_in); |
| 4253 | |
| 4254 | /* Determine lowest PDR address, the PDRs are not always |
| 4255 | sorted. */ |
| 4256 | if (pdr_in == pr_block) |
| 4257 | lowest_pdr_addr = pdr_in->adr; |
| 4258 | else if (pdr_in->adr < lowest_pdr_addr) |
| 4259 | lowest_pdr_addr = pdr_in->adr; |
| 4260 | } |
| 4261 | |
| 4262 | parse_lines (fh, pr_block, lines, maxlines, |
| 4263 | pst, lowest_pdr_addr); |
| 4264 | if (lines->nitems < fh->cline) |
| 4265 | lines = shrink_linetable (lines); |
| 4266 | |
| 4267 | /* Fill in procedure info next. */ |
| 4268 | pdr_in = pr_block; |
| 4269 | pdr_in_end = pdr_in + fh->cpd; |
| 4270 | for (; pdr_in < pdr_in_end; pdr_in++) |
| 4271 | parse_procedure (pdr_in, NULL, pst); |
| 4272 | |
| 4273 | do_cleanups (old_chain); |
| 4274 | } |
| 4275 | } |
| 4276 | |
| 4277 | size = lines->nitems; |
| 4278 | if (size > 1) |
| 4279 | --size; |
| 4280 | SYMTAB_LINETABLE (COMPUNIT_FILETABS (cust)) |
| 4281 | = obstack_copy (&mdebugread_objfile->objfile_obstack, |
| 4282 | lines, |
| 4283 | (sizeof (struct linetable) |
| 4284 | + size * sizeof (lines->item))); |
| 4285 | xfree (lines); |
| 4286 | |
| 4287 | /* .. and our share of externals. |
| 4288 | XXX use the global list to speed up things here. How? |
| 4289 | FIXME, Maybe quit once we have found the right number of ext's? */ |
| 4290 | top_stack->cur_st = COMPUNIT_FILETABS (cust); |
| 4291 | top_stack->cur_block |
| 4292 | = BLOCKVECTOR_BLOCK (SYMTAB_BLOCKVECTOR (top_stack->cur_st), |
| 4293 | GLOBAL_BLOCK); |
| 4294 | top_stack->blocktype = stFile; |
| 4295 | |
| 4296 | ext_ptr = PST_PRIVATE (pst)->extern_tab; |
| 4297 | for (i = PST_PRIVATE (pst)->extern_count; --i >= 0; ext_ptr++) |
| 4298 | parse_external (ext_ptr, fh->fBigendian, |
| 4299 | section_offsets, objfile); |
| 4300 | |
| 4301 | /* If there are undefined symbols, tell the user. |
| 4302 | The alpha has an undefined symbol for every symbol that is |
| 4303 | from a shared library, so tell the user only if verbose is on. */ |
| 4304 | if (info_verbose && n_undef_symbols) |
| 4305 | { |
| 4306 | printf_filtered (_("File %s contains %d unresolved references:"), |
| 4307 | symtab_to_filename_for_display |
| 4308 | (COMPUNIT_FILETABS (cust)), |
| 4309 | n_undef_symbols); |
| 4310 | printf_filtered ("\n\t%4d variables\n\t%4d " |
| 4311 | "procedures\n\t%4d labels\n", |
| 4312 | n_undef_vars, n_undef_procs, n_undef_labels); |
| 4313 | n_undef_symbols = n_undef_labels = n_undef_vars = n_undef_procs = 0; |
| 4314 | |
| 4315 | } |
| 4316 | pop_parse_stack (); |
| 4317 | |
| 4318 | sort_blocks (COMPUNIT_FILETABS (cust)); |
| 4319 | } |
| 4320 | |
| 4321 | /* Now link the psymtab and the symtab. */ |
| 4322 | pst->compunit_symtab = cust; |
| 4323 | |
| 4324 | mdebugread_objfile = NULL; |
| 4325 | } |
| 4326 | \f |
| 4327 | /* Ancillary parsing procedures. */ |
| 4328 | |
| 4329 | /* Return 1 if the symbol pointed to by SH has a cross reference |
| 4330 | to an opaque aggregate type, else 0. */ |
| 4331 | |
| 4332 | static int |
| 4333 | has_opaque_xref (FDR *fh, SYMR *sh) |
| 4334 | { |
| 4335 | TIR tir; |
| 4336 | union aux_ext *ax; |
| 4337 | RNDXR rn[1]; |
| 4338 | unsigned int rf; |
| 4339 | |
| 4340 | if (sh->index == indexNil) |
| 4341 | return 0; |
| 4342 | |
| 4343 | ax = debug_info->external_aux + fh->iauxBase + sh->index; |
| 4344 | (*debug_swap->swap_tir_in) (fh->fBigendian, &ax->a_ti, &tir); |
| 4345 | if (tir.bt != btStruct && tir.bt != btUnion && tir.bt != btEnum) |
| 4346 | return 0; |
| 4347 | |
| 4348 | ax++; |
| 4349 | (*debug_swap->swap_rndx_in) (fh->fBigendian, &ax->a_rndx, rn); |
| 4350 | if (rn->rfd == 0xfff) |
| 4351 | rf = AUX_GET_ISYM (fh->fBigendian, ax + 1); |
| 4352 | else |
| 4353 | rf = rn->rfd; |
| 4354 | if (rf != -1) |
| 4355 | return 0; |
| 4356 | return 1; |
| 4357 | } |
| 4358 | |
| 4359 | /* Lookup the type at relative index RN. Return it in TPP |
| 4360 | if found and in any event come up with its name PNAME. |
| 4361 | BIGEND says whether aux symbols are big-endian or not (from fh->fBigendian). |
| 4362 | Return value says how many aux symbols we ate. */ |
| 4363 | |
| 4364 | static int |
| 4365 | cross_ref (int fd, union aux_ext *ax, struct type **tpp, |
| 4366 | enum type_code type_code, |
| 4367 | /* Use to alloc new type if none is found. */ |
| 4368 | char **pname, int bigend, char *sym_name) |
| 4369 | { |
| 4370 | RNDXR rn[1]; |
| 4371 | unsigned int rf; |
| 4372 | int result = 1; |
| 4373 | FDR *fh; |
| 4374 | char *esh; |
| 4375 | SYMR sh; |
| 4376 | int xref_fd; |
| 4377 | struct mdebug_pending *pend; |
| 4378 | |
| 4379 | *tpp = NULL; |
| 4380 | |
| 4381 | (*debug_swap->swap_rndx_in) (bigend, &ax->a_rndx, rn); |
| 4382 | |
| 4383 | /* Escape index means 'the next one'. */ |
| 4384 | if (rn->rfd == 0xfff) |
| 4385 | { |
| 4386 | result++; |
| 4387 | rf = AUX_GET_ISYM (bigend, ax + 1); |
| 4388 | } |
| 4389 | else |
| 4390 | { |
| 4391 | rf = rn->rfd; |
| 4392 | } |
| 4393 | |
| 4394 | /* mips cc uses a rf of -1 for opaque struct definitions. |
| 4395 | Set TYPE_FLAG_STUB for these types so that check_typedef will |
| 4396 | resolve them if the struct gets defined in another compilation unit. */ |
| 4397 | if (rf == -1) |
| 4398 | { |
| 4399 | *pname = "<undefined>"; |
| 4400 | *tpp = init_type (type_code, 0, TYPE_FLAG_STUB, |
| 4401 | (char *) NULL, mdebugread_objfile); |
| 4402 | return result; |
| 4403 | } |
| 4404 | |
| 4405 | /* mips cc uses an escaped rn->index of 0 for struct return types |
| 4406 | of procedures that were compiled without -g. These will always remain |
| 4407 | undefined. */ |
| 4408 | if (rn->rfd == 0xfff && rn->index == 0) |
| 4409 | { |
| 4410 | *pname = "<undefined>"; |
| 4411 | return result; |
| 4412 | } |
| 4413 | |
| 4414 | /* Find the relative file descriptor and the symbol in it. */ |
| 4415 | fh = get_rfd (fd, rf); |
| 4416 | xref_fd = fh - debug_info->fdr; |
| 4417 | |
| 4418 | if (rn->index >= fh->csym) |
| 4419 | { |
| 4420 | /* File indirect entry is corrupt. */ |
| 4421 | *pname = "<illegal>"; |
| 4422 | bad_rfd_entry_complaint (sym_name, xref_fd, rn->index); |
| 4423 | return result; |
| 4424 | } |
| 4425 | |
| 4426 | /* If we have processed this symbol then we left a forwarding |
| 4427 | pointer to the type in the pending list. If not, we`ll put |
| 4428 | it in a list of pending types, to be processed later when |
| 4429 | the file will be. In any event, we collect the name for the |
| 4430 | type here. */ |
| 4431 | |
| 4432 | esh = ((char *) debug_info->external_sym |
| 4433 | + ((fh->isymBase + rn->index) |
| 4434 | * debug_swap->external_sym_size)); |
| 4435 | (*debug_swap->swap_sym_in) (cur_bfd, esh, &sh); |
| 4436 | |
| 4437 | /* Make sure that this type of cross reference can be handled. */ |
| 4438 | if ((sh.sc != scInfo |
| 4439 | || (sh.st != stBlock && sh.st != stTypedef && sh.st != stIndirect |
| 4440 | && sh.st != stStruct && sh.st != stUnion |
| 4441 | && sh.st != stEnum)) |
| 4442 | && (sh.st != stBlock || !SC_IS_COMMON (sh.sc))) |
| 4443 | { |
| 4444 | /* File indirect entry is corrupt. */ |
| 4445 | *pname = "<illegal>"; |
| 4446 | bad_rfd_entry_complaint (sym_name, xref_fd, rn->index); |
| 4447 | return result; |
| 4448 | } |
| 4449 | |
| 4450 | *pname = debug_info->ss + fh->issBase + sh.iss; |
| 4451 | |
| 4452 | pend = is_pending_symbol (fh, esh); |
| 4453 | if (pend) |
| 4454 | *tpp = pend->t; |
| 4455 | else |
| 4456 | { |
| 4457 | /* We have not yet seen this type. */ |
| 4458 | |
| 4459 | if ((sh.iss == 0 && sh.st == stTypedef) || sh.st == stIndirect) |
| 4460 | { |
| 4461 | TIR tir; |
| 4462 | |
| 4463 | /* alpha cc puts out a stTypedef with a sh.iss of zero for |
| 4464 | two cases: |
| 4465 | a) forward declarations of structs/unions/enums which are not |
| 4466 | defined in this compilation unit. |
| 4467 | For these the type will be void. This is a bad design decision |
| 4468 | as cross referencing across compilation units is impossible |
| 4469 | due to the missing name. |
| 4470 | b) forward declarations of structs/unions/enums/typedefs which |
| 4471 | are defined later in this file or in another file in the same |
| 4472 | compilation unit. Irix5 cc uses a stIndirect symbol for this. |
| 4473 | Simply cross reference those again to get the true type. |
| 4474 | The forward references are not entered in the pending list and |
| 4475 | in the symbol table. */ |
| 4476 | |
| 4477 | (*debug_swap->swap_tir_in) (bigend, |
| 4478 | &(debug_info->external_aux |
| 4479 | + fh->iauxBase + sh.index)->a_ti, |
| 4480 | &tir); |
| 4481 | if (tir.tq0 != tqNil) |
| 4482 | complaint (&symfile_complaints, |
| 4483 | _("illegal tq0 in forward typedef for %s"), sym_name); |
| 4484 | switch (tir.bt) |
| 4485 | { |
| 4486 | case btVoid: |
| 4487 | *tpp = init_type (type_code, 0, 0, (char *) NULL, |
| 4488 | mdebugread_objfile); |
| 4489 | *pname = "<undefined>"; |
| 4490 | break; |
| 4491 | |
| 4492 | case btStruct: |
| 4493 | case btUnion: |
| 4494 | case btEnum: |
| 4495 | cross_ref (xref_fd, |
| 4496 | (debug_info->external_aux |
| 4497 | + fh->iauxBase + sh.index + 1), |
| 4498 | tpp, type_code, pname, |
| 4499 | fh->fBigendian, sym_name); |
| 4500 | break; |
| 4501 | |
| 4502 | case btTypedef: |
| 4503 | /* Follow a forward typedef. This might recursively |
| 4504 | call cross_ref till we get a non typedef'ed type. |
| 4505 | FIXME: This is not correct behaviour, but gdb currently |
| 4506 | cannot handle typedefs without type copying. Type |
| 4507 | copying is impossible as we might have mutual forward |
| 4508 | references between two files and the copied type would not |
| 4509 | get filled in when we later parse its definition. */ |
| 4510 | *tpp = parse_type (xref_fd, |
| 4511 | debug_info->external_aux + fh->iauxBase, |
| 4512 | sh.index, |
| 4513 | (int *) NULL, |
| 4514 | fh->fBigendian, |
| 4515 | debug_info->ss + fh->issBase + sh.iss); |
| 4516 | add_pending (fh, esh, *tpp); |
| 4517 | break; |
| 4518 | |
| 4519 | default: |
| 4520 | complaint (&symfile_complaints, |
| 4521 | _("illegal bt %d in forward typedef for %s"), tir.bt, |
| 4522 | sym_name); |
| 4523 | *tpp = init_type (type_code, 0, 0, (char *) NULL, |
| 4524 | mdebugread_objfile); |
| 4525 | break; |
| 4526 | } |
| 4527 | return result; |
| 4528 | } |
| 4529 | else if (sh.st == stTypedef) |
| 4530 | { |
| 4531 | /* Parse the type for a normal typedef. This might recursively call |
| 4532 | cross_ref till we get a non typedef'ed type. |
| 4533 | FIXME: This is not correct behaviour, but gdb currently |
| 4534 | cannot handle typedefs without type copying. But type copying is |
| 4535 | impossible as we might have mutual forward references between |
| 4536 | two files and the copied type would not get filled in when |
| 4537 | we later parse its definition. */ |
| 4538 | *tpp = parse_type (xref_fd, |
| 4539 | debug_info->external_aux + fh->iauxBase, |
| 4540 | sh.index, |
| 4541 | (int *) NULL, |
| 4542 | fh->fBigendian, |
| 4543 | debug_info->ss + fh->issBase + sh.iss); |
| 4544 | } |
| 4545 | else |
| 4546 | { |
| 4547 | /* Cross reference to a struct/union/enum which is defined |
| 4548 | in another file in the same compilation unit but that file |
| 4549 | has not been parsed yet. |
| 4550 | Initialize the type only, it will be filled in when |
| 4551 | it's definition is parsed. */ |
| 4552 | *tpp = init_type (type_code, 0, 0, (char *) NULL, mdebugread_objfile); |
| 4553 | } |
| 4554 | add_pending (fh, esh, *tpp); |
| 4555 | } |
| 4556 | |
| 4557 | /* We used one auxent normally, two if we got a "next one" rf. */ |
| 4558 | return result; |
| 4559 | } |
| 4560 | |
| 4561 | |
| 4562 | /* Quick&dirty lookup procedure, to avoid the MI ones that require |
| 4563 | keeping the symtab sorted. */ |
| 4564 | |
| 4565 | static struct symbol * |
| 4566 | mylookup_symbol (char *name, const struct block *block, |
| 4567 | domain_enum domain, enum address_class theclass) |
| 4568 | { |
| 4569 | struct block_iterator iter; |
| 4570 | int inc; |
| 4571 | struct symbol *sym; |
| 4572 | |
| 4573 | inc = name[0]; |
| 4574 | ALL_BLOCK_SYMBOLS (block, iter, sym) |
| 4575 | { |
| 4576 | if (SYMBOL_LINKAGE_NAME (sym)[0] == inc |
| 4577 | && SYMBOL_DOMAIN (sym) == domain |
| 4578 | && SYMBOL_CLASS (sym) == theclass |
| 4579 | && strcmp (SYMBOL_LINKAGE_NAME (sym), name) == 0) |
| 4580 | return sym; |
| 4581 | } |
| 4582 | |
| 4583 | block = BLOCK_SUPERBLOCK (block); |
| 4584 | if (block) |
| 4585 | return mylookup_symbol (name, block, domain, theclass); |
| 4586 | return 0; |
| 4587 | } |
| 4588 | |
| 4589 | |
| 4590 | /* Add a new symbol S to a block B. */ |
| 4591 | |
| 4592 | static void |
| 4593 | add_symbol (struct symbol *s, struct symtab *symtab, struct block *b) |
| 4594 | { |
| 4595 | symbol_set_symtab (s, symtab); |
| 4596 | dict_add_symbol (BLOCK_DICT (b), s); |
| 4597 | } |
| 4598 | |
| 4599 | /* Add a new block B to a symtab S. */ |
| 4600 | |
| 4601 | static void |
| 4602 | add_block (struct block *b, struct symtab *s) |
| 4603 | { |
| 4604 | /* Cast away "const", but that's ok because we're building the |
| 4605 | symtab and blockvector here. */ |
| 4606 | struct blockvector *bv = (struct blockvector *) SYMTAB_BLOCKVECTOR (s); |
| 4607 | |
| 4608 | bv = (struct blockvector *) xrealloc ((void *) bv, |
| 4609 | (sizeof (struct blockvector) |
| 4610 | + BLOCKVECTOR_NBLOCKS (bv) |
| 4611 | * sizeof (bv->block))); |
| 4612 | if (bv != SYMTAB_BLOCKVECTOR (s)) |
| 4613 | SYMTAB_BLOCKVECTOR (s) = bv; |
| 4614 | |
| 4615 | BLOCKVECTOR_BLOCK (bv, BLOCKVECTOR_NBLOCKS (bv)++) = b; |
| 4616 | } |
| 4617 | |
| 4618 | /* Add a new linenumber entry (LINENO,ADR) to a linevector LT. |
| 4619 | MIPS' linenumber encoding might need more than one byte |
| 4620 | to describe it, LAST is used to detect these continuation lines. |
| 4621 | |
| 4622 | Combining lines with the same line number seems like a bad idea. |
| 4623 | E.g: There could be a line number entry with the same line number after the |
| 4624 | prologue and GDB should not ignore it (this is a better way to find |
| 4625 | a prologue than mips_skip_prologue). |
| 4626 | But due to the compressed line table format there are line number entries |
| 4627 | for the same line which are needed to bridge the gap to the next |
| 4628 | line number entry. These entries have a bogus address info with them |
| 4629 | and we are unable to tell them from intended duplicate line number |
| 4630 | entries. |
| 4631 | This is another reason why -ggdb debugging format is preferable. */ |
| 4632 | |
| 4633 | static int |
| 4634 | add_line (struct linetable *lt, int lineno, CORE_ADDR adr, int last) |
| 4635 | { |
| 4636 | /* DEC c89 sometimes produces zero linenos which confuse gdb. |
| 4637 | Change them to something sensible. */ |
| 4638 | if (lineno == 0) |
| 4639 | lineno = 1; |
| 4640 | if (last == 0) |
| 4641 | last = -2; /* Make sure we record first line. */ |
| 4642 | |
| 4643 | if (last == lineno) /* Skip continuation lines. */ |
| 4644 | return lineno; |
| 4645 | |
| 4646 | lt->item[lt->nitems].line = lineno; |
| 4647 | lt->item[lt->nitems++].pc = adr << 2; |
| 4648 | return lineno; |
| 4649 | } |
| 4650 | \f |
| 4651 | /* Sorting and reordering procedures. */ |
| 4652 | |
| 4653 | /* Blocks with a smaller low bound should come first. */ |
| 4654 | |
| 4655 | static int |
| 4656 | compare_blocks (const void *arg1, const void *arg2) |
| 4657 | { |
| 4658 | LONGEST addr_diff; |
| 4659 | struct block **b1 = (struct block **) arg1; |
| 4660 | struct block **b2 = (struct block **) arg2; |
| 4661 | |
| 4662 | addr_diff = (BLOCK_START ((*b1))) - (BLOCK_START ((*b2))); |
| 4663 | if (addr_diff == 0) |
| 4664 | return (BLOCK_END ((*b2))) - (BLOCK_END ((*b1))); |
| 4665 | return addr_diff; |
| 4666 | } |
| 4667 | |
| 4668 | /* Sort the blocks of a symtab S. |
| 4669 | Reorder the blocks in the blockvector by code-address, |
| 4670 | as required by some MI search routines. */ |
| 4671 | |
| 4672 | static void |
| 4673 | sort_blocks (struct symtab *s) |
| 4674 | { |
| 4675 | /* We have to cast away const here, but this is ok because we're |
| 4676 | constructing the blockvector in this code. */ |
| 4677 | struct blockvector *bv = (struct blockvector *) SYMTAB_BLOCKVECTOR (s); |
| 4678 | |
| 4679 | if (BLOCKVECTOR_NBLOCKS (bv) <= FIRST_LOCAL_BLOCK) |
| 4680 | { |
| 4681 | /* Cosmetic */ |
| 4682 | if (BLOCK_END (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)) == 0) |
| 4683 | BLOCK_START (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)) = 0; |
| 4684 | if (BLOCK_END (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) == 0) |
| 4685 | BLOCK_START (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) = 0; |
| 4686 | return; |
| 4687 | } |
| 4688 | /* |
| 4689 | * This is very unfortunate: normally all functions are compiled in |
| 4690 | * the order they are found, but if the file is compiled -O3 things |
| 4691 | * are very different. It would be nice to find a reliable test |
| 4692 | * to detect -O3 images in advance. |
| 4693 | */ |
| 4694 | if (BLOCKVECTOR_NBLOCKS (bv) > FIRST_LOCAL_BLOCK + 1) |
| 4695 | qsort (&BLOCKVECTOR_BLOCK (bv, FIRST_LOCAL_BLOCK), |
| 4696 | BLOCKVECTOR_NBLOCKS (bv) - FIRST_LOCAL_BLOCK, |
| 4697 | sizeof (struct block *), |
| 4698 | compare_blocks); |
| 4699 | |
| 4700 | { |
| 4701 | CORE_ADDR high = 0; |
| 4702 | int i, j = BLOCKVECTOR_NBLOCKS (bv); |
| 4703 | |
| 4704 | for (i = FIRST_LOCAL_BLOCK; i < j; i++) |
| 4705 | if (high < BLOCK_END (BLOCKVECTOR_BLOCK (bv, i))) |
| 4706 | high = BLOCK_END (BLOCKVECTOR_BLOCK (bv, i)); |
| 4707 | BLOCK_END (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)) = high; |
| 4708 | } |
| 4709 | |
| 4710 | BLOCK_START (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)) = |
| 4711 | BLOCK_START (BLOCKVECTOR_BLOCK (bv, FIRST_LOCAL_BLOCK)); |
| 4712 | |
| 4713 | BLOCK_START (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) = |
| 4714 | BLOCK_START (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)); |
| 4715 | BLOCK_END (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) = |
| 4716 | BLOCK_END (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)); |
| 4717 | } |
| 4718 | \f |
| 4719 | |
| 4720 | /* Constructor/restructor/destructor procedures. */ |
| 4721 | |
| 4722 | /* Allocate a new symtab for NAME. Needs an estimate of how many |
| 4723 | linenumbers MAXLINES we'll put in it. */ |
| 4724 | |
| 4725 | static struct compunit_symtab * |
| 4726 | new_symtab (const char *name, int maxlines, struct objfile *objfile) |
| 4727 | { |
| 4728 | struct compunit_symtab *cust = allocate_compunit_symtab (objfile, name); |
| 4729 | struct symtab *symtab; |
| 4730 | struct blockvector *bv; |
| 4731 | |
| 4732 | add_compunit_symtab_to_objfile (cust); |
| 4733 | symtab = allocate_symtab (cust, name); |
| 4734 | |
| 4735 | SYMTAB_LINETABLE (symtab) = new_linetable (maxlines); |
| 4736 | |
| 4737 | /* All symtabs must have at least two blocks. */ |
| 4738 | bv = new_bvect (2); |
| 4739 | BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK) = new_block (NON_FUNCTION_BLOCK); |
| 4740 | BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK) = new_block (NON_FUNCTION_BLOCK); |
| 4741 | BLOCK_SUPERBLOCK (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) = |
| 4742 | BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK); |
| 4743 | COMPUNIT_BLOCKVECTOR (cust) = bv; |
| 4744 | |
| 4745 | COMPUNIT_DEBUGFORMAT (cust) = "ECOFF"; |
| 4746 | return cust; |
| 4747 | } |
| 4748 | |
| 4749 | /* Allocate a new partial_symtab NAME. */ |
| 4750 | |
| 4751 | static struct partial_symtab * |
| 4752 | new_psymtab (char *name, struct objfile *objfile) |
| 4753 | { |
| 4754 | struct partial_symtab *psymtab; |
| 4755 | |
| 4756 | psymtab = allocate_psymtab (name, objfile); |
| 4757 | |
| 4758 | /* Keep a backpointer to the file's symbols. */ |
| 4759 | |
| 4760 | psymtab->read_symtab_private = obstack_alloc (&objfile->objfile_obstack, |
| 4761 | sizeof (struct symloc)); |
| 4762 | memset (psymtab->read_symtab_private, 0, sizeof (struct symloc)); |
| 4763 | CUR_BFD (psymtab) = cur_bfd; |
| 4764 | DEBUG_SWAP (psymtab) = debug_swap; |
| 4765 | DEBUG_INFO (psymtab) = debug_info; |
| 4766 | PENDING_LIST (psymtab) = pending_list; |
| 4767 | |
| 4768 | /* The way to turn this into a symtab is to call... */ |
| 4769 | psymtab->read_symtab = mdebug_read_symtab; |
| 4770 | return (psymtab); |
| 4771 | } |
| 4772 | |
| 4773 | |
| 4774 | /* Allocate a linetable array of the given SIZE. Since the struct |
| 4775 | already includes one item, we subtract one when calculating the |
| 4776 | proper size to allocate. */ |
| 4777 | |
| 4778 | static struct linetable * |
| 4779 | new_linetable (int size) |
| 4780 | { |
| 4781 | struct linetable *l; |
| 4782 | |
| 4783 | if (size > 1) |
| 4784 | --size; |
| 4785 | size = size * sizeof (l->item) + sizeof (struct linetable); |
| 4786 | l = (struct linetable *) xmalloc (size); |
| 4787 | l->nitems = 0; |
| 4788 | return l; |
| 4789 | } |
| 4790 | |
| 4791 | /* Oops, too big. Shrink it. This was important with the 2.4 linetables, |
| 4792 | I am not so sure about the 3.4 ones. |
| 4793 | |
| 4794 | Since the struct linetable already includes one item, we subtract one when |
| 4795 | calculating the proper size to allocate. */ |
| 4796 | |
| 4797 | static struct linetable * |
| 4798 | shrink_linetable (struct linetable *lt) |
| 4799 | { |
| 4800 | return (struct linetable *) xrealloc ((void *) lt, |
| 4801 | (sizeof (struct linetable) |
| 4802 | + ((lt->nitems - 1) |
| 4803 | * sizeof (lt->item)))); |
| 4804 | } |
| 4805 | |
| 4806 | /* Allocate and zero a new blockvector of NBLOCKS blocks. */ |
| 4807 | |
| 4808 | static struct blockvector * |
| 4809 | new_bvect (int nblocks) |
| 4810 | { |
| 4811 | struct blockvector *bv; |
| 4812 | int size; |
| 4813 | |
| 4814 | size = sizeof (struct blockvector) + nblocks * sizeof (struct block *); |
| 4815 | bv = (struct blockvector *) xzalloc (size); |
| 4816 | |
| 4817 | BLOCKVECTOR_NBLOCKS (bv) = nblocks; |
| 4818 | |
| 4819 | return bv; |
| 4820 | } |
| 4821 | |
| 4822 | /* Allocate and zero a new block, and set its BLOCK_DICT. If function |
| 4823 | is non-zero, assume the block is associated to a function, and make |
| 4824 | sure that the symbols are stored linearly; otherwise, store them |
| 4825 | hashed. */ |
| 4826 | |
| 4827 | static struct block * |
| 4828 | new_block (enum block_type type) |
| 4829 | { |
| 4830 | /* FIXME: carlton/2003-09-11: This should use allocate_block to |
| 4831 | allocate the block. Which, in turn, suggests that the block |
| 4832 | should be allocated on an obstack. */ |
| 4833 | struct block *retval = XCNEW (struct block); |
| 4834 | |
| 4835 | if (type == FUNCTION_BLOCK) |
| 4836 | BLOCK_DICT (retval) = dict_create_linear_expandable (); |
| 4837 | else |
| 4838 | BLOCK_DICT (retval) = dict_create_hashed_expandable (); |
| 4839 | |
| 4840 | return retval; |
| 4841 | } |
| 4842 | |
| 4843 | /* Create a new symbol with printname NAME. */ |
| 4844 | |
| 4845 | static struct symbol * |
| 4846 | new_symbol (char *name) |
| 4847 | { |
| 4848 | struct symbol *s = allocate_symbol (mdebugread_objfile); |
| 4849 | |
| 4850 | SYMBOL_SET_LANGUAGE (s, psymtab_language, |
| 4851 | &mdebugread_objfile->objfile_obstack); |
| 4852 | SYMBOL_SET_NAMES (s, name, strlen (name), 1, mdebugread_objfile); |
| 4853 | return s; |
| 4854 | } |
| 4855 | |
| 4856 | /* Create a new type with printname NAME. */ |
| 4857 | |
| 4858 | static struct type * |
| 4859 | new_type (char *name) |
| 4860 | { |
| 4861 | struct type *t; |
| 4862 | |
| 4863 | t = alloc_type (mdebugread_objfile); |
| 4864 | TYPE_NAME (t) = name; |
| 4865 | INIT_CPLUS_SPECIFIC (t); |
| 4866 | return t; |
| 4867 | } |
| 4868 | \f |
| 4869 | /* Read ECOFF debugging information from a BFD section. This is |
| 4870 | called from elfread.c. It parses the section into a |
| 4871 | ecoff_debug_info struct, and then lets the rest of the file handle |
| 4872 | it as normal. */ |
| 4873 | |
| 4874 | void |
| 4875 | elfmdebug_build_psymtabs (struct objfile *objfile, |
| 4876 | const struct ecoff_debug_swap *swap, asection *sec) |
| 4877 | { |
| 4878 | bfd *abfd = objfile->obfd; |
| 4879 | struct ecoff_debug_info *info; |
| 4880 | struct cleanup *back_to; |
| 4881 | |
| 4882 | /* FIXME: It's not clear whether we should be getting minimal symbol |
| 4883 | information from .mdebug in an ELF file, or whether we will. |
| 4884 | Re-initialize the minimal symbol reader in case we do. */ |
| 4885 | |
| 4886 | init_minimal_symbol_collection (); |
| 4887 | back_to = make_cleanup_discard_minimal_symbols (); |
| 4888 | |
| 4889 | info = ((struct ecoff_debug_info *) |
| 4890 | obstack_alloc (&objfile->objfile_obstack, |
| 4891 | sizeof (struct ecoff_debug_info))); |
| 4892 | |
| 4893 | if (!(*swap->read_debug_info) (abfd, sec, info)) |
| 4894 | error (_("Error reading ECOFF debugging information: %s"), |
| 4895 | bfd_errmsg (bfd_get_error ())); |
| 4896 | |
| 4897 | mdebug_build_psymtabs (objfile, swap, info); |
| 4898 | |
| 4899 | install_minimal_symbols (objfile); |
| 4900 | do_cleanups (back_to); |
| 4901 | } |
| 4902 | |
| 4903 | void |
| 4904 | _initialize_mdebugread (void) |
| 4905 | { |
| 4906 | basic_type_data = register_objfile_data (); |
| 4907 | |
| 4908 | mdebug_register_index |
| 4909 | = register_symbol_register_impl (LOC_REGISTER, &mdebug_register_funcs); |
| 4910 | mdebug_regparm_index |
| 4911 | = register_symbol_register_impl (LOC_REGPARM_ADDR, &mdebug_register_funcs); |
| 4912 | } |