| 1 | /* Definitions for remote debugging interface for ROM monitors. |
| 2 | Copyright 1990, 1991, 1992, 1996 Free Software Foundation, Inc. |
| 3 | Contributed by Cygnus Support. Written by Rob Savoye for Cygnus. |
| 4 | |
| 5 | This file is part of GDB. |
| 6 | |
| 7 | This program is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 2 of the License, or |
| 10 | (at your option) any later version. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| 20 | */ |
| 21 | |
| 22 | #include "serial.h" |
| 23 | |
| 24 | /* This structure describes the strings necessary to give small command |
| 25 | sequences to the monitor, and parse the response. |
| 26 | |
| 27 | CMD is the actual command typed at the monitor. Usually this has |
| 28 | embedded sequences ala printf, which are substituted with the |
| 29 | arguments appropriate to that type of command. Ie: to examine a |
| 30 | register, we substitute the register name for the first arg. To |
| 31 | modify memory, we substitute the memory location and the new |
| 32 | contents for the first and second args, etc... |
| 33 | |
| 34 | RESP_DELIM used to home in on the response string, and is used to |
| 35 | disambiguate the answer within the pile of text returned by the |
| 36 | monitor. This should be a unique string that immediately precedes |
| 37 | the answer. Ie: if your monitor prints out `PC: 00000001= ' in |
| 38 | response to asking for the PC, you should use `: ' as the |
| 39 | RESP_DELIM. RESP_DELIM may be NULL if the res- ponse is going to |
| 40 | be ignored, or has no particular leading text. |
| 41 | |
| 42 | TERM is the string that the monitor outputs to indicate that it is |
| 43 | idle, and waiting for input. This is usually a prompt of some |
| 44 | sort. In the previous example, it would be `= '. It is important |
| 45 | that TERM really means that the monitor is idle, otherwise GDB may |
| 46 | try to type at it when it isn't ready for input. This is a problem |
| 47 | because many monitors cannot deal with type-ahead. TERM may be |
| 48 | NULL if the normal prompt is output. |
| 49 | |
| 50 | TERM_CMD is used to quit out of the subcommand mode and get back to |
| 51 | the main prompt. TERM_CMD may be NULL if it isn't necessary. It |
| 52 | will also be ignored if TERM is NULL. */ |
| 53 | |
| 54 | struct memrw_cmd |
| 55 | { |
| 56 | char *cmdb; /* Command to send for byte read/write */ |
| 57 | char *cmdw; /* Command for word (16 bit) read/write */ |
| 58 | char *cmdl; /* Command for long (32 bit) read/write */ |
| 59 | char *cmdll; /* Command for long long (64 bit) read/write */ |
| 60 | char *resp_delim; /* String just prior to the desired value */ |
| 61 | char *term; /* Terminating string to search for */ |
| 62 | char *term_cmd; /* String to get out of sub-mode (if necessary) */ |
| 63 | }; |
| 64 | |
| 65 | struct regrw_cmd |
| 66 | { |
| 67 | char *cmd; /* Command to send for reg read/write */ |
| 68 | char *resp_delim; /* String (actually a regexp if getmem) just |
| 69 | prior to the desired value */ |
| 70 | char *term; /* Terminating string to search for */ |
| 71 | char *term_cmd; /* String to get out of sub-mode (if necessary) */ |
| 72 | }; |
| 73 | |
| 74 | struct monitor_ops |
| 75 | { |
| 76 | int flags; /* See below */ |
| 77 | char **init; /* List of init commands. NULL terminated. */ |
| 78 | char *cont; /* continue command */ |
| 79 | char *step; /* single step */ |
| 80 | char *stop; /* Interrupt program string */ |
| 81 | char *set_break; /* set a breakpoint */ |
| 82 | char *clr_break; /* clear a breakpoint */ |
| 83 | char *clr_all_break; /* Clear all breakpoints */ |
| 84 | char *fill; /* Memory fill cmd (addr len val) */ |
| 85 | struct memrw_cmd setmem; /* set memory to a value */ |
| 86 | struct memrw_cmd getmem; /* display memory */ |
| 87 | struct regrw_cmd setreg; /* set a register */ |
| 88 | struct regrw_cmd getreg; /* get a register */ |
| 89 | /* Some commands can dump a bunch of registers |
| 90 | at once. This comes as a set of REG=VAL |
| 91 | pairs. This should be called for each pair |
| 92 | of registers that we can parse to supply |
| 93 | GDB with the value of a register. */ |
| 94 | char *dump_registers; /* Command to dump all regs at once */ |
| 95 | char *register_pattern; /* Pattern that picks out register from reg dump */ |
| 96 | void (*supply_register) PARAMS ((char *name, int namelen, |
| 97 | char *val, int vallen)); |
| 98 | void (*load_routine) PARAMS ((serial_t desc, char *file, |
| 99 | int hashmark)); /* Download routine */ |
| 100 | int (*dumpregs) PARAMS((void)) ; /* routine to dump all registers */ |
| 101 | int (*continue_hook) PARAMS((void)) ; /* Emit the continue command */ |
| 102 | int (*wait_filter) PARAMS((char * buf, /* Maybe contains registers */ |
| 103 | int bufmax , |
| 104 | int * response_length, |
| 105 | struct target_waitstatus * status)) ; |
| 106 | char *load; /* load command */ |
| 107 | char *loadresp; /* Response to load command */ |
| 108 | char *prompt; /* monitor command prompt */ |
| 109 | char *line_term; /* end-of-command delimitor */ |
| 110 | char *cmd_end; /* optional command terminator */ |
| 111 | struct target_ops *target; /* target operations */ |
| 112 | int stopbits; /* number of stop bits */ |
| 113 | char **regnames; /* array of register names in ascii */ |
| 114 | int magic; /* Check value */ |
| 115 | }; |
| 116 | |
| 117 | /* The monitor ops magic number, used to detect if an ops structure doesn't |
| 118 | have the right number of entries filled in. */ |
| 119 | |
| 120 | #define MONITOR_OPS_MAGIC 600925 |
| 121 | |
| 122 | /* Flag definitions. */ |
| 123 | |
| 124 | /* If set, then clear breakpoint command uses address, otherwise it |
| 125 | uses an index returned by the monitor. */ |
| 126 | |
| 127 | #define MO_CLR_BREAK_USES_ADDR 0x1 |
| 128 | |
| 129 | /* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE |
| 130 | as args, else it uses STARTADDR, LENGTH, VALUE as args. */ |
| 131 | |
| 132 | #define MO_FILL_USES_ADDR 0x2 |
| 133 | |
| 134 | /* If set, then monitor doesn't automatically supply register dump |
| 135 | when coming back after a continue. */ |
| 136 | |
| 137 | #define MO_NEED_REGDUMP_AFTER_CONT 0x4 |
| 138 | |
| 139 | /* getmem needs start addr and end addr */ |
| 140 | |
| 141 | #define MO_GETMEM_NEEDS_RANGE 0x8 |
| 142 | |
| 143 | /* getmem can only read one loc at a time */ |
| 144 | |
| 145 | #define MO_GETMEM_READ_SINGLE 0x10 |
| 146 | |
| 147 | /* handle \r\n combinations */ |
| 148 | |
| 149 | #define MO_HANDLE_NL 0x20 |
| 150 | |
| 151 | /* don't expect echos in monitor_open */ |
| 152 | |
| 153 | #define MO_NO_ECHO_ON_OPEN 0x40 |
| 154 | |
| 155 | /* If set, send break to stop monitor */ |
| 156 | |
| 157 | #define MO_SEND_BREAK_ON_STOP 0x80 |
| 158 | |
| 159 | /* If set, target sends an ACK after each S-record */ |
| 160 | |
| 161 | #define MO_SREC_ACK 0x100 |
| 162 | |
| 163 | /* Allow 0x prefix on addresses retured from monitor */ |
| 164 | |
| 165 | #define MO_HEX_PREFIX 0x200 |
| 166 | |
| 167 | /* Some monitors require a different command when starting a program */ |
| 168 | |
| 169 | #define MO_RUN_FIRST_TIME 0x400 |
| 170 | |
| 171 | /* Don't expect echos when getting memory */ |
| 172 | |
| 173 | #define MO_NO_ECHO_ON_SETMEM 0x800 |
| 174 | |
| 175 | /* If set, then register store command expects value BEFORE regname */ |
| 176 | |
| 177 | #define MO_REGISTER_VALUE_FIRST 0x1000 |
| 178 | |
| 179 | /* If set, then the monitor displays registers as pairs. */ |
| 180 | |
| 181 | #define MO_32_REGS_PAIRED 0x2000 |
| 182 | |
| 183 | /* If set, then register setting happens interactively. */ |
| 184 | |
| 185 | #define MO_SETREG_INTERACTIVE 0x4000 |
| 186 | |
| 187 | /* If set, then memory setting happens interactively. */ |
| 188 | |
| 189 | #define MO_SETMEM_INTERACTIVE 0x8000 |
| 190 | |
| 191 | /* If set, then memory dumps are always on 16-byte boundaries, even |
| 192 | when less is desired. */ |
| 193 | |
| 194 | #define MO_GETMEM_16_BOUNDARY 0x10000 |
| 195 | |
| 196 | /* If set, then the monitor numbers its breakpoints starting from 1. */ |
| 197 | |
| 198 | #define MO_CLR_BREAK_1_BASED 0x20000 |
| 199 | |
| 200 | /* If set, then the monitor acks srecords with a plus sign. */ |
| 201 | |
| 202 | #define MO_SREC_ACK_PLUS 0x40000 |
| 203 | |
| 204 | /* If set, then the monitor "acks" srecords with rotating lines. */ |
| 205 | |
| 206 | #define MO_SREC_ACK_ROTATE 0x80000 |
| 207 | |
| 208 | /* If set, then remove useless address bits from memory addresses. */ |
| 209 | |
| 210 | #define MO_ADDR_BITS_REMOVE 0x100000 |
| 211 | |
| 212 | /* If set, then display target program output if prefixed by ^O. */ |
| 213 | |
| 214 | #define MO_PRINT_PROGRAM_OUTPUT 0x200000 |
| 215 | |
| 216 | /* Some dump bytes commands align the first data with the preceeding |
| 217 | 16 byte boundary. Some print blanks and start at the exactly the |
| 218 | requested boundary. */ |
| 219 | |
| 220 | #define MO_EXACT_DUMPADDR 0x400000 |
| 221 | |
| 222 | /* Rather entering and exiting the write memory dialog for each word byte, |
| 223 | we can save time by transferring the whole block without exiting |
| 224 | the memory editing mode. You only need to worry about this |
| 225 | if you are doing memory downloading. |
| 226 | This engages a new write function registered with dcache. |
| 227 | */ |
| 228 | #define MO_HAS_BLOCKWRITES 0x800000 |
| 229 | |
| 230 | #define SREC_SIZE 160 |
| 231 | |
| 232 | extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops, |
| 233 | int from_tty)); |
| 234 | extern void monitor_close PARAMS ((int quitting)); |
| 235 | extern char *monitor_supply_register PARAMS ((int regno, char *valstr)); |
| 236 | extern int monitor_expect PARAMS ((char *prompt, char *buf, int buflen)); |
| 237 | extern int monitor_expect_prompt PARAMS ((char *buf, int buflen)); |
| 238 | extern void monitor_printf PARAMS ((char *, ...)) |
| 239 | ATTR_FORMAT(printf, 1, 2); |
| 240 | extern void monitor_printf_noecho PARAMS ((char *, ...)) |
| 241 | ATTR_FORMAT(printf, 1, 2); |
| 242 | extern void monitor_write PARAMS ((char *buf, int buflen)); |
| 243 | extern int monitor_readchar PARAMS ((void)); |
| 244 | extern char *monitor_get_dev_name PARAMS ((void)); |
| 245 | extern void init_monitor_ops PARAMS ((struct target_ops *)); |
| 246 | extern int monitor_dump_reg_block PARAMS((char * dump_cmd)) ; |