| 1 | /* Target communications support for Macraigor Systems' On-Chip Debugging |
| 2 | Copyright 1996, 1997 Free Software Foundation, Inc. |
| 3 | |
| 4 | This file is part of GDB. |
| 5 | |
| 6 | This program is free software; you can redistribute it and/or modify |
| 7 | it under the terms of the GNU General Public License as published by |
| 8 | the Free Software Foundation; either version 2 of the License, or |
| 9 | (at your option) any later version. |
| 10 | |
| 11 | This program is distributed in the hope that it will be useful, |
| 12 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | GNU General Public License for more details. |
| 15 | |
| 16 | You should have received a copy of the GNU General Public License |
| 17 | along with this program; if not, write to the Free Software |
| 18 | Foundation, Inc., 59 Temple Place - Suite 330, |
| 19 | Boston, MA 02111-1307, USA. */ |
| 20 | |
| 21 | #include "defs.h" |
| 22 | #include "gdbcore.h" |
| 23 | #include "gdb_string.h" |
| 24 | #include <fcntl.h> |
| 25 | #include "frame.h" |
| 26 | #include "inferior.h" |
| 27 | #include "bfd.h" |
| 28 | #include "symfile.h" |
| 29 | #include "target.h" |
| 30 | #include "gdb_wait.h" |
| 31 | #include "gdbcmd.h" |
| 32 | #include "objfiles.h" |
| 33 | #include "gdb-stabs.h" |
| 34 | #include <sys/types.h> |
| 35 | #include <signal.h> |
| 36 | #include "serial.h" |
| 37 | #include "ocd.h" |
| 38 | |
| 39 | /* Prototypes for local functions */ |
| 40 | |
| 41 | static int ocd_read_bytes (CORE_ADDR memaddr, char *myaddr, int len); |
| 42 | |
| 43 | static int ocd_start_remote (PTR dummy); |
| 44 | |
| 45 | static int readchar (int timeout); |
| 46 | |
| 47 | static void reset_packet (void); |
| 48 | |
| 49 | static void output_packet (void); |
| 50 | |
| 51 | static int get_quoted_char (int timeout); |
| 52 | |
| 53 | static void put_quoted_char (int c); |
| 54 | |
| 55 | static void ocd_interrupt (int signo); |
| 56 | |
| 57 | static void ocd_interrupt_twice (int signo); |
| 58 | |
| 59 | static void interrupt_query (void); |
| 60 | |
| 61 | static unsigned char *ocd_do_command (int cmd, int *statusp, int *lenp); |
| 62 | |
| 63 | static void ocd_put_packet (unsigned char *packet, int pktlen); |
| 64 | |
| 65 | static unsigned char *ocd_get_packet (int cmd, int *pktlen, int timeout); |
| 66 | |
| 67 | static struct target_ops *current_ops = NULL; |
| 68 | |
| 69 | static int last_run_status; |
| 70 | |
| 71 | /* This was 5 seconds, which is a long time to sit and wait. |
| 72 | Unless this is going though some terminal server or multiplexer or |
| 73 | other form of hairy serial connection, I would think 2 seconds would |
| 74 | be plenty. */ |
| 75 | |
| 76 | #if 0 |
| 77 | /* FIXME: Change to allow option to set timeout value on a per target |
| 78 | basis. */ |
| 79 | static int remote_timeout = 2; |
| 80 | #endif |
| 81 | |
| 82 | /* Descriptor for I/O to remote machine. Initialize it to NULL so that |
| 83 | ocd_open knows that we don't have a file open when the program |
| 84 | starts. */ |
| 85 | static serial_t ocd_desc = NULL; |
| 86 | \f |
| 87 | void |
| 88 | ocd_error (char *s, int error_code) |
| 89 | { |
| 90 | char buf[100]; |
| 91 | |
| 92 | fputs_filtered (s, gdb_stderr); |
| 93 | fputs_filtered (" ", gdb_stderr); |
| 94 | |
| 95 | switch (error_code) |
| 96 | { |
| 97 | case 0x1: |
| 98 | s = "Unknown fault"; |
| 99 | break; |
| 100 | case 0x2: |
| 101 | s = "Power failed"; |
| 102 | break; |
| 103 | case 0x3: |
| 104 | s = "Cable disconnected"; |
| 105 | break; |
| 106 | case 0x4: |
| 107 | s = "Couldn't enter OCD mode"; |
| 108 | break; |
| 109 | case 0x5: |
| 110 | s = "Target stuck in reset"; |
| 111 | break; |
| 112 | case 0x6: |
| 113 | s = "OCD hasn't been initialized"; |
| 114 | break; |
| 115 | case 0x7: |
| 116 | s = "Write verify failed"; |
| 117 | break; |
| 118 | case 0x8: |
| 119 | s = "Reg buff error (during MPC5xx fp reg read/write)"; |
| 120 | break; |
| 121 | case 0x9: |
| 122 | s = "Invalid CPU register access attempt failed"; |
| 123 | break; |
| 124 | case 0x11: |
| 125 | s = "Bus error"; |
| 126 | break; |
| 127 | case 0x12: |
| 128 | s = "Checksum error"; |
| 129 | break; |
| 130 | case 0x13: |
| 131 | s = "Illegal command"; |
| 132 | break; |
| 133 | case 0x14: |
| 134 | s = "Parameter error"; |
| 135 | break; |
| 136 | case 0x15: |
| 137 | s = "Internal error"; |
| 138 | break; |
| 139 | case 0x80: |
| 140 | s = "Flash erase error"; |
| 141 | break; |
| 142 | default: |
| 143 | sprintf (buf, "Unknown error code %d", error_code); |
| 144 | s = buf; |
| 145 | } |
| 146 | |
| 147 | error (s); |
| 148 | } |
| 149 | |
| 150 | /* Return nonzero if the thread TH is still alive on the remote system. */ |
| 151 | |
| 152 | int |
| 153 | ocd_thread_alive (int th) |
| 154 | { |
| 155 | return 1; |
| 156 | } |
| 157 | \f |
| 158 | /* Clean up connection to a remote debugger. */ |
| 159 | |
| 160 | /* ARGSUSED */ |
| 161 | void |
| 162 | ocd_close (int quitting) |
| 163 | { |
| 164 | if (ocd_desc) |
| 165 | SERIAL_CLOSE (ocd_desc); |
| 166 | ocd_desc = NULL; |
| 167 | } |
| 168 | |
| 169 | /* Stub for catch_errors. */ |
| 170 | |
| 171 | static int |
| 172 | ocd_start_remote (PTR dummy) |
| 173 | { |
| 174 | unsigned char buf[10], *p; |
| 175 | int pktlen; |
| 176 | int status; |
| 177 | int error_code; |
| 178 | int speed; |
| 179 | enum ocd_target_type target_type; |
| 180 | |
| 181 | target_type = *(enum ocd_target_type *) dummy; |
| 182 | |
| 183 | immediate_quit++; /* Allow user to interrupt it */ |
| 184 | |
| 185 | SERIAL_SEND_BREAK (ocd_desc); /* Wake up the wiggler */ |
| 186 | |
| 187 | speed = 80; /* Divide clock by 4000 */ |
| 188 | |
| 189 | buf[0] = OCD_INIT; |
| 190 | buf[1] = speed >> 8; |
| 191 | buf[2] = speed & 0xff; |
| 192 | buf[3] = target_type; |
| 193 | ocd_put_packet (buf, 4); /* Init OCD params */ |
| 194 | p = ocd_get_packet (buf[0], &pktlen, remote_timeout); |
| 195 | |
| 196 | if (pktlen < 2) |
| 197 | error ("Truncated response packet from OCD device"); |
| 198 | |
| 199 | status = p[1]; |
| 200 | error_code = p[2]; |
| 201 | |
| 202 | if (error_code != 0) |
| 203 | ocd_error ("OCD_INIT:", error_code); |
| 204 | |
| 205 | ocd_do_command (OCD_AYT, &status, &pktlen); |
| 206 | |
| 207 | p = ocd_do_command (OCD_GET_VERSION, &status, &pktlen); |
| 208 | |
| 209 | printf_unfiltered ("[Wiggler version %x.%x, capability 0x%x]\n", |
| 210 | p[0], p[1], (p[2] << 16) | p[3]); |
| 211 | |
| 212 | #if 0 |
| 213 | /* Reset the target */ |
| 214 | |
| 215 | ocd_do_command (OCD_RESET_RUN, &status, &pktlen); |
| 216 | /* ocd_do_command (OCD_RESET, &status, &pktlen); */ |
| 217 | #endif |
| 218 | |
| 219 | /* If processor is still running, stop it. */ |
| 220 | |
| 221 | if (!(status & OCD_FLAG_BDM)) |
| 222 | ocd_stop (); |
| 223 | |
| 224 | #if 1 |
| 225 | /* When using a target box, we want to asynchronously return status when |
| 226 | target stops. The OCD_SET_CTL_FLAGS command is ignored by Wigglers.dll |
| 227 | when using a parallel Wiggler */ |
| 228 | buf[0] = OCD_SET_CTL_FLAGS; |
| 229 | buf[1] = 0; |
| 230 | buf[2] = 1; |
| 231 | ocd_put_packet (buf, 3); |
| 232 | |
| 233 | p = ocd_get_packet (buf[0], &pktlen, remote_timeout); |
| 234 | |
| 235 | if (pktlen < 2) |
| 236 | error ("Truncated response packet from OCD device"); |
| 237 | |
| 238 | status = p[1]; |
| 239 | error_code = p[2]; |
| 240 | |
| 241 | if (error_code != 0) |
| 242 | ocd_error ("OCD_SET_CTL_FLAGS:", error_code); |
| 243 | #endif |
| 244 | |
| 245 | immediate_quit--; |
| 246 | |
| 247 | /* This is really the job of start_remote however, that makes an assumption |
| 248 | that the target is about to print out a status message of some sort. That |
| 249 | doesn't happen here (in fact, it may not be possible to get the monitor to |
| 250 | send the appropriate packet). */ |
| 251 | |
| 252 | flush_cached_frames (); |
| 253 | registers_changed (); |
| 254 | stop_pc = read_pc (); |
| 255 | set_current_frame (create_new_frame (read_fp (), stop_pc)); |
| 256 | select_frame (get_current_frame (), 0); |
| 257 | print_stack_frame (selected_frame, -1, 1); |
| 258 | |
| 259 | buf[0] = OCD_LOG_FILE; |
| 260 | buf[1] = 3; /* close existing WIGGLERS.LOG */ |
| 261 | ocd_put_packet (buf, 2); |
| 262 | p = ocd_get_packet (buf[0], &pktlen, remote_timeout); |
| 263 | |
| 264 | buf[0] = OCD_LOG_FILE; |
| 265 | buf[1] = 2; /* append to existing WIGGLERS.LOG */ |
| 266 | ocd_put_packet (buf, 2); |
| 267 | p = ocd_get_packet (buf[0], &pktlen, remote_timeout); |
| 268 | |
| 269 | return 1; |
| 270 | } |
| 271 | |
| 272 | /* Open a connection to a remote debugger. |
| 273 | NAME is the filename used for communication. */ |
| 274 | |
| 275 | void |
| 276 | ocd_open (char *name, int from_tty, enum ocd_target_type target_type, |
| 277 | struct target_ops *ops) |
| 278 | { |
| 279 | unsigned char buf[10], *p; |
| 280 | int pktlen; |
| 281 | |
| 282 | if (name == 0) |
| 283 | error ("To open an OCD connection, you need to specify the\n\ |
| 284 | device the OCD device is attached to (e.g. /dev/ttya)."); |
| 285 | |
| 286 | target_preopen (from_tty); |
| 287 | |
| 288 | current_ops = ops; |
| 289 | |
| 290 | unpush_target (current_ops); |
| 291 | |
| 292 | if (strncmp (name, "wiggler", 7) == 0) |
| 293 | { |
| 294 | ocd_desc = SERIAL_OPEN ("ocd"); |
| 295 | if (!ocd_desc) |
| 296 | perror_with_name (name); |
| 297 | |
| 298 | buf[0] = OCD_LOG_FILE; |
| 299 | buf[1] = 1; /* open new or overwrite existing WIGGLERS.LOG */ |
| 300 | ocd_put_packet (buf, 2); |
| 301 | p = ocd_get_packet (buf[0], &pktlen, remote_timeout); |
| 302 | |
| 303 | buf[0] = OCD_SET_CONNECTION; |
| 304 | buf[1] = 0x01; /* atoi (name[11]); */ |
| 305 | ocd_put_packet (buf, 2); |
| 306 | p = ocd_get_packet (buf[0], &pktlen, remote_timeout); |
| 307 | } |
| 308 | else |
| 309 | /* not using Wigglers.dll */ |
| 310 | { |
| 311 | ocd_desc = SERIAL_OPEN (name); |
| 312 | if (!ocd_desc) |
| 313 | perror_with_name (name); |
| 314 | } |
| 315 | |
| 316 | if (baud_rate != -1) |
| 317 | { |
| 318 | if (SERIAL_SETBAUDRATE (ocd_desc, baud_rate)) |
| 319 | { |
| 320 | SERIAL_CLOSE (ocd_desc); |
| 321 | perror_with_name (name); |
| 322 | } |
| 323 | } |
| 324 | |
| 325 | SERIAL_RAW (ocd_desc); |
| 326 | |
| 327 | /* If there is something sitting in the buffer we might take it as a |
| 328 | response to a command, which would be bad. */ |
| 329 | SERIAL_FLUSH_INPUT (ocd_desc); |
| 330 | |
| 331 | if (from_tty) |
| 332 | { |
| 333 | puts_filtered ("Remote target wiggler connected to "); |
| 334 | puts_filtered (name); |
| 335 | puts_filtered ("\n"); |
| 336 | } |
| 337 | push_target (current_ops); /* Switch to using remote target now */ |
| 338 | |
| 339 | /* Without this, some commands which require an active target (such as kill) |
| 340 | won't work. This variable serves (at least) double duty as both the pid |
| 341 | of the target process (if it has such), and as a flag indicating that a |
| 342 | target is active. These functions should be split out into seperate |
| 343 | variables, especially since GDB will someday have a notion of debugging |
| 344 | several processes. */ |
| 345 | |
| 346 | inferior_pid = 42000; |
| 347 | /* Start the remote connection; if error (0), discard this target. |
| 348 | In particular, if the user quits, be sure to discard it |
| 349 | (we'd be in an inconsistent state otherwise). */ |
| 350 | if (!catch_errors (ocd_start_remote, &target_type, |
| 351 | "Couldn't establish connection to remote target\n", |
| 352 | RETURN_MASK_ALL)) |
| 353 | { |
| 354 | pop_target (); |
| 355 | error ("Failed to connect to OCD."); |
| 356 | } |
| 357 | } |
| 358 | |
| 359 | /* This takes a program previously attached to and detaches it. After |
| 360 | this is done, GDB can be used to debug some other program. We |
| 361 | better not have left any breakpoints in the target program or it'll |
| 362 | die when it hits one. */ |
| 363 | |
| 364 | void |
| 365 | ocd_detach (char *args, int from_tty) |
| 366 | { |
| 367 | if (args) |
| 368 | error ("Argument given to \"detach\" when remotely debugging."); |
| 369 | |
| 370 | pop_target (); |
| 371 | if (from_tty) |
| 372 | puts_filtered ("Ending remote debugging.\n"); |
| 373 | } |
| 374 | \f |
| 375 | /* Tell the remote machine to resume. */ |
| 376 | |
| 377 | void |
| 378 | ocd_resume (int pid, int step, enum target_signal siggnal) |
| 379 | { |
| 380 | int pktlen; |
| 381 | |
| 382 | if (step) |
| 383 | ocd_do_command (OCD_STEP, &last_run_status, &pktlen); |
| 384 | else |
| 385 | ocd_do_command (OCD_RUN, &last_run_status, &pktlen); |
| 386 | } |
| 387 | \f |
| 388 | void |
| 389 | ocd_stop (void) |
| 390 | { |
| 391 | int status; |
| 392 | int pktlen; |
| 393 | |
| 394 | ocd_do_command (OCD_STOP, &status, &pktlen); |
| 395 | |
| 396 | if (!(status & OCD_FLAG_BDM)) |
| 397 | error ("Can't stop target via BDM"); |
| 398 | } |
| 399 | |
| 400 | static volatile int ocd_interrupt_flag; |
| 401 | |
| 402 | /* Send ^C to target to halt it. Target will respond, and send us a |
| 403 | packet. */ |
| 404 | |
| 405 | static void |
| 406 | ocd_interrupt (int signo) |
| 407 | { |
| 408 | /* If this doesn't work, try more severe steps. */ |
| 409 | signal (signo, ocd_interrupt_twice); |
| 410 | |
| 411 | if (remote_debug) |
| 412 | printf_unfiltered ("ocd_interrupt called\n"); |
| 413 | |
| 414 | { |
| 415 | char buf[1]; |
| 416 | |
| 417 | ocd_stop (); |
| 418 | buf[0] = OCD_AYT; |
| 419 | ocd_put_packet (buf, 1); |
| 420 | ocd_interrupt_flag = 1; |
| 421 | } |
| 422 | } |
| 423 | |
| 424 | static void (*ofunc) (); |
| 425 | |
| 426 | /* The user typed ^C twice. */ |
| 427 | static void |
| 428 | ocd_interrupt_twice (int signo) |
| 429 | { |
| 430 | signal (signo, ofunc); |
| 431 | |
| 432 | interrupt_query (); |
| 433 | |
| 434 | signal (signo, ocd_interrupt); |
| 435 | } |
| 436 | |
| 437 | /* Ask the user what to do when an interrupt is received. */ |
| 438 | |
| 439 | static void |
| 440 | interrupt_query (void) |
| 441 | { |
| 442 | target_terminal_ours (); |
| 443 | |
| 444 | if (query ("Interrupted while waiting for the program.\n\ |
| 445 | Give up (and stop debugging it)? ")) |
| 446 | { |
| 447 | target_mourn_inferior (); |
| 448 | return_to_top_level (RETURN_QUIT); |
| 449 | } |
| 450 | |
| 451 | target_terminal_inferior (); |
| 452 | } |
| 453 | |
| 454 | /* If nonzero, ignore the next kill. */ |
| 455 | static int kill_kludge; |
| 456 | |
| 457 | /* Wait until the remote machine stops, then return, |
| 458 | storing status in STATUS just as `wait' would. |
| 459 | Returns "pid" (though it's not clear what, if anything, that |
| 460 | means in the case of this target). */ |
| 461 | |
| 462 | int |
| 463 | ocd_wait (void) |
| 464 | { |
| 465 | unsigned char *p; |
| 466 | int error_code; |
| 467 | int pktlen; |
| 468 | char buf[1]; |
| 469 | |
| 470 | ocd_interrupt_flag = 0; |
| 471 | |
| 472 | /* Target might already be stopped by the time we get here. */ |
| 473 | /* If we aren't already stopped, we need to loop until we've dropped |
| 474 | back into BDM mode */ |
| 475 | |
| 476 | while (!(last_run_status & OCD_FLAG_BDM)) |
| 477 | { |
| 478 | buf[0] = OCD_AYT; |
| 479 | ocd_put_packet (buf, 1); |
| 480 | p = ocd_get_packet (OCD_AYT, &pktlen, -1); |
| 481 | |
| 482 | ofunc = (void (*)()) signal (SIGINT, ocd_interrupt); |
| 483 | signal (SIGINT, ofunc); |
| 484 | |
| 485 | if (pktlen < 2) |
| 486 | error ("Truncated response packet from OCD device"); |
| 487 | |
| 488 | last_run_status = p[1]; |
| 489 | error_code = p[2]; |
| 490 | |
| 491 | if (error_code != 0) |
| 492 | ocd_error ("target_wait:", error_code); |
| 493 | |
| 494 | if (last_run_status & OCD_FLAG_PWF) |
| 495 | error ("OCD device lost VCC at BDM interface."); |
| 496 | else if (last_run_status & OCD_FLAG_CABLE_DISC) |
| 497 | error ("OCD device cable appears to have been disconnected."); |
| 498 | } |
| 499 | |
| 500 | if (ocd_interrupt_flag) |
| 501 | return 1; |
| 502 | else |
| 503 | return 0; |
| 504 | } |
| 505 | |
| 506 | /* Read registers from the OCD device. Specify the starting and ending |
| 507 | register number. Return the number of regs actually read in *NUMREGS. |
| 508 | Returns a pointer to a static array containing the register contents. */ |
| 509 | |
| 510 | unsigned char * |
| 511 | ocd_read_bdm_registers (int first_bdm_regno, int last_bdm_regno, int *reglen) |
| 512 | { |
| 513 | unsigned char buf[10]; |
| 514 | int i; |
| 515 | unsigned char *p; |
| 516 | unsigned char *regs; |
| 517 | int error_code, status; |
| 518 | int pktlen; |
| 519 | |
| 520 | buf[0] = OCD_READ_REGS; |
| 521 | buf[1] = first_bdm_regno >> 8; |
| 522 | buf[2] = first_bdm_regno & 0xff; |
| 523 | buf[3] = last_bdm_regno >> 8; |
| 524 | buf[4] = last_bdm_regno & 0xff; |
| 525 | |
| 526 | ocd_put_packet (buf, 5); |
| 527 | p = ocd_get_packet (OCD_READ_REGS, &pktlen, remote_timeout); |
| 528 | |
| 529 | status = p[1]; |
| 530 | error_code = p[2]; |
| 531 | |
| 532 | if (error_code != 0) |
| 533 | ocd_error ("read_bdm_registers:", error_code); |
| 534 | |
| 535 | i = p[3]; |
| 536 | if (i == 0) |
| 537 | i = 256; |
| 538 | |
| 539 | if (i > pktlen - 4 |
| 540 | || ((i & 3) != 0)) |
| 541 | error ("Register block size bad: %d", i); |
| 542 | |
| 543 | *reglen = i; |
| 544 | |
| 545 | regs = p + 4; |
| 546 | |
| 547 | return regs; |
| 548 | } |
| 549 | |
| 550 | /* Read register BDM_REGNO and returns its value ala read_register() */ |
| 551 | |
| 552 | CORE_ADDR |
| 553 | ocd_read_bdm_register (int bdm_regno) |
| 554 | { |
| 555 | int reglen; |
| 556 | unsigned char *p; |
| 557 | CORE_ADDR regval; |
| 558 | |
| 559 | p = ocd_read_bdm_registers (bdm_regno, bdm_regno, ®len); |
| 560 | regval = extract_unsigned_integer (p, reglen); |
| 561 | |
| 562 | return regval; |
| 563 | } |
| 564 | |
| 565 | void |
| 566 | ocd_write_bdm_registers (int first_bdm_regno, unsigned char *regptr, int reglen) |
| 567 | { |
| 568 | unsigned char *buf; |
| 569 | unsigned char *p; |
| 570 | int error_code, status; |
| 571 | int pktlen; |
| 572 | |
| 573 | buf = alloca (4 + reglen); |
| 574 | |
| 575 | buf[0] = OCD_WRITE_REGS; |
| 576 | buf[1] = first_bdm_regno >> 8; |
| 577 | buf[2] = first_bdm_regno & 0xff; |
| 578 | buf[3] = reglen; |
| 579 | memcpy (buf + 4, regptr, reglen); |
| 580 | |
| 581 | ocd_put_packet (buf, 4 + reglen); |
| 582 | p = ocd_get_packet (OCD_WRITE_REGS, &pktlen, remote_timeout); |
| 583 | |
| 584 | if (pktlen < 3) |
| 585 | error ("Truncated response packet from OCD device"); |
| 586 | |
| 587 | status = p[1]; |
| 588 | error_code = p[2]; |
| 589 | |
| 590 | if (error_code != 0) |
| 591 | ocd_error ("ocd_write_bdm_registers:", error_code); |
| 592 | } |
| 593 | |
| 594 | void |
| 595 | ocd_write_bdm_register (int bdm_regno, CORE_ADDR reg) |
| 596 | { |
| 597 | unsigned char buf[4]; |
| 598 | |
| 599 | store_unsigned_integer (buf, 4, reg); |
| 600 | |
| 601 | ocd_write_bdm_registers (bdm_regno, buf, 4); |
| 602 | } |
| 603 | \f |
| 604 | void |
| 605 | ocd_prepare_to_store (void) |
| 606 | { |
| 607 | } |
| 608 | \f |
| 609 | /* Write memory data directly to the remote machine. |
| 610 | This does not inform the data cache; the data cache uses this. |
| 611 | MEMADDR is the address in the remote memory space. |
| 612 | MYADDR is the address of the buffer in our space. |
| 613 | LEN is the number of bytes. |
| 614 | |
| 615 | Returns number of bytes transferred, or 0 for error. */ |
| 616 | |
| 617 | static int write_mem_command = OCD_WRITE_MEM; |
| 618 | |
| 619 | int |
| 620 | ocd_write_bytes (CORE_ADDR memaddr, char *myaddr, int len) |
| 621 | { |
| 622 | char buf[256 + 10]; |
| 623 | unsigned char *p; |
| 624 | int origlen; |
| 625 | |
| 626 | origlen = len; |
| 627 | |
| 628 | buf[0] = write_mem_command; |
| 629 | buf[5] = 1; /* Write as bytes */ |
| 630 | buf[6] = 0; /* Don't verify */ |
| 631 | |
| 632 | while (len > 0) |
| 633 | { |
| 634 | int numbytes; |
| 635 | int pktlen; |
| 636 | int status, error_code; |
| 637 | |
| 638 | numbytes = min (len, 256 - 8); |
| 639 | |
| 640 | buf[1] = memaddr >> 24; |
| 641 | buf[2] = memaddr >> 16; |
| 642 | buf[3] = memaddr >> 8; |
| 643 | buf[4] = memaddr; |
| 644 | |
| 645 | buf[7] = numbytes; |
| 646 | |
| 647 | memcpy (&buf[8], myaddr, numbytes); |
| 648 | ocd_put_packet (buf, 8 + numbytes); |
| 649 | p = ocd_get_packet (OCD_WRITE_MEM, &pktlen, remote_timeout); |
| 650 | if (pktlen < 3) |
| 651 | error ("Truncated response packet from OCD device"); |
| 652 | |
| 653 | status = p[1]; |
| 654 | error_code = p[2]; |
| 655 | |
| 656 | if (error_code == 0x11) /* Got a bus error? */ |
| 657 | { |
| 658 | CORE_ADDR error_address; |
| 659 | |
| 660 | error_address = p[3] << 24; |
| 661 | error_address |= p[4] << 16; |
| 662 | error_address |= p[5] << 8; |
| 663 | error_address |= p[6]; |
| 664 | numbytes = error_address - memaddr; |
| 665 | |
| 666 | len -= numbytes; |
| 667 | |
| 668 | errno = EIO; |
| 669 | |
| 670 | break; |
| 671 | } |
| 672 | else if (error_code != 0) |
| 673 | ocd_error ("ocd_write_bytes:", error_code); |
| 674 | |
| 675 | len -= numbytes; |
| 676 | memaddr += numbytes; |
| 677 | myaddr += numbytes; |
| 678 | } |
| 679 | |
| 680 | return origlen - len; |
| 681 | } |
| 682 | |
| 683 | /* Read memory data directly from the remote machine. |
| 684 | This does not use the data cache; the data cache uses this. |
| 685 | MEMADDR is the address in the remote memory space. |
| 686 | MYADDR is the address of the buffer in our space. |
| 687 | LEN is the number of bytes. |
| 688 | |
| 689 | Returns number of bytes transferred, or 0 for error. */ |
| 690 | |
| 691 | static int |
| 692 | ocd_read_bytes (CORE_ADDR memaddr, char *myaddr, int len) |
| 693 | { |
| 694 | char buf[256 + 10]; |
| 695 | unsigned char *p; |
| 696 | int origlen; |
| 697 | |
| 698 | origlen = len; |
| 699 | |
| 700 | buf[0] = OCD_READ_MEM; |
| 701 | buf[5] = 1; /* Read as bytes */ |
| 702 | |
| 703 | while (len > 0) |
| 704 | { |
| 705 | int numbytes; |
| 706 | int pktlen; |
| 707 | int status, error_code; |
| 708 | |
| 709 | numbytes = min (len, 256 - 7); |
| 710 | |
| 711 | buf[1] = memaddr >> 24; |
| 712 | buf[2] = memaddr >> 16; |
| 713 | buf[3] = memaddr >> 8; |
| 714 | buf[4] = memaddr; |
| 715 | |
| 716 | buf[6] = numbytes; |
| 717 | |
| 718 | ocd_put_packet (buf, 7); |
| 719 | p = ocd_get_packet (OCD_READ_MEM, &pktlen, remote_timeout); |
| 720 | if (pktlen < 4) |
| 721 | error ("Truncated response packet from OCD device"); |
| 722 | |
| 723 | status = p[1]; |
| 724 | error_code = p[2]; |
| 725 | |
| 726 | if (error_code == 0x11) /* Got a bus error? */ |
| 727 | { |
| 728 | CORE_ADDR error_address; |
| 729 | |
| 730 | error_address = p[3] << 24; |
| 731 | error_address |= p[4] << 16; |
| 732 | error_address |= p[5] << 8; |
| 733 | error_address |= p[6]; |
| 734 | numbytes = error_address - memaddr; |
| 735 | |
| 736 | len -= numbytes; |
| 737 | |
| 738 | errno = EIO; |
| 739 | |
| 740 | break; |
| 741 | } |
| 742 | else if (error_code != 0) |
| 743 | ocd_error ("ocd_read_bytes:", error_code); |
| 744 | |
| 745 | memcpy (myaddr, &p[4], numbytes); |
| 746 | |
| 747 | len -= numbytes; |
| 748 | memaddr += numbytes; |
| 749 | myaddr += numbytes; |
| 750 | } |
| 751 | |
| 752 | return origlen - len; |
| 753 | } |
| 754 | \f |
| 755 | /* Read or write LEN bytes from inferior memory at MEMADDR, transferring |
| 756 | to or from debugger address MYADDR. Write to inferior if SHOULD_WRITE is |
| 757 | nonzero. Returns length of data written or read; 0 for error. TARGET |
| 758 | is ignored. */ |
| 759 | |
| 760 | /* ARGSUSED */ |
| 761 | int |
| 762 | ocd_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int should_write, |
| 763 | struct target_ops *target) |
| 764 | { |
| 765 | int res; |
| 766 | |
| 767 | if (should_write) |
| 768 | res = ocd_write_bytes (memaddr, myaddr, len); |
| 769 | else |
| 770 | res = ocd_read_bytes (memaddr, myaddr, len); |
| 771 | |
| 772 | return res; |
| 773 | } |
| 774 | \f |
| 775 | void |
| 776 | ocd_files_info (struct target_ops *ignore) |
| 777 | { |
| 778 | puts_filtered ("Debugging a target over a serial line.\n"); |
| 779 | } |
| 780 | \f |
| 781 | /* Stuff for dealing with the packets which are part of this protocol. |
| 782 | See comment at top of file for details. */ |
| 783 | |
| 784 | /* Read a single character from the remote side, handling wierd errors. */ |
| 785 | |
| 786 | static int |
| 787 | readchar (int timeout) |
| 788 | { |
| 789 | int ch; |
| 790 | |
| 791 | ch = SERIAL_READCHAR (ocd_desc, timeout); |
| 792 | |
| 793 | switch (ch) |
| 794 | { |
| 795 | case SERIAL_EOF: |
| 796 | error ("Remote connection closed"); |
| 797 | case SERIAL_ERROR: |
| 798 | perror_with_name ("Remote communication error"); |
| 799 | case SERIAL_TIMEOUT: |
| 800 | default: |
| 801 | return ch; |
| 802 | } |
| 803 | } |
| 804 | |
| 805 | #if 0 |
| 806 | /* Read a character from the data stream, dequoting as necessary. SYN is |
| 807 | treated special. Any SYNs appearing in the data stream are returned as the |
| 808 | distinct value RAW_SYN (which has a value > 8 bits and therefore cannot be |
| 809 | mistaken for real data). */ |
| 810 | |
| 811 | static int |
| 812 | get_quoted_char (int timeout) |
| 813 | { |
| 814 | int ch; |
| 815 | |
| 816 | ch = readchar (timeout); |
| 817 | |
| 818 | switch (ch) |
| 819 | { |
| 820 | case SERIAL_TIMEOUT: |
| 821 | error ("Timeout in mid-packet, aborting"); |
| 822 | case SYN: |
| 823 | return RAW_SYN; |
| 824 | case DLE: |
| 825 | ch = readchar (timeout); |
| 826 | if (ch == SYN) |
| 827 | return RAW_SYN; |
| 828 | return ch & ~0100; |
| 829 | default: |
| 830 | return ch; |
| 831 | } |
| 832 | } |
| 833 | |
| 834 | static unsigned char pkt[256 * 2 + 10], *pktp; /* Worst case */ |
| 835 | |
| 836 | static void |
| 837 | reset_packet (void) |
| 838 | { |
| 839 | pktp = pkt; |
| 840 | } |
| 841 | |
| 842 | static void |
| 843 | output_packet (void) |
| 844 | { |
| 845 | if (SERIAL_WRITE (ocd_desc, pkt, pktp - pkt)) |
| 846 | perror_with_name ("output_packet: write failed"); |
| 847 | |
| 848 | reset_packet (); |
| 849 | } |
| 850 | |
| 851 | /* Output a quoted character. SYNs and DLEs are quoted. Everything else goes |
| 852 | through untouched. */ |
| 853 | |
| 854 | static void |
| 855 | put_quoted_char (int c) |
| 856 | { |
| 857 | switch (c) |
| 858 | { |
| 859 | case SYN: |
| 860 | case DLE: |
| 861 | *pktp++ = DLE; |
| 862 | c |= 0100; |
| 863 | } |
| 864 | |
| 865 | *pktp++ = c; |
| 866 | } |
| 867 | |
| 868 | /* Send a packet to the OCD device. The packet framed by a SYN character, |
| 869 | a byte count and a checksum. The byte count only counts the number of |
| 870 | bytes between the count and the checksum. A count of zero actually |
| 871 | means 256. Any SYNs within the packet (including the checksum and |
| 872 | count) must be quoted. The quote character must be quoted as well. |
| 873 | Quoting is done by replacing the character with the two-character sequence |
| 874 | DLE, {char} | 0100. Note that the quoting mechanism has no effect on the |
| 875 | byte count. */ |
| 876 | |
| 877 | static void |
| 878 | stu_put_packet (unsigned char *buf, int len) |
| 879 | { |
| 880 | unsigned char checksum; |
| 881 | unsigned char c; |
| 882 | |
| 883 | if (len == 0 || len > 256) |
| 884 | abort (); /* Can't represent 0 length packet */ |
| 885 | |
| 886 | reset_packet (); |
| 887 | |
| 888 | checksum = 0; |
| 889 | |
| 890 | put_quoted_char (RAW_SYN); |
| 891 | |
| 892 | c = len; |
| 893 | |
| 894 | do |
| 895 | { |
| 896 | checksum += c; |
| 897 | |
| 898 | put_quoted_char (c); |
| 899 | |
| 900 | c = *buf++; |
| 901 | } |
| 902 | while (len-- > 0); |
| 903 | |
| 904 | put_quoted_char (-checksum & 0xff); |
| 905 | |
| 906 | output_packet (); |
| 907 | } |
| 908 | |
| 909 | #else |
| 910 | |
| 911 | /* Send a packet to the OCD device. The packet framed by a SYN character, |
| 912 | a byte count and a checksum. The byte count only counts the number of |
| 913 | bytes between the count and the checksum. A count of zero actually |
| 914 | means 256. Any SYNs within the packet (including the checksum and |
| 915 | count) must be quoted. The quote character must be quoted as well. |
| 916 | Quoting is done by replacing the character with the two-character sequence |
| 917 | DLE, {char} | 0100. Note that the quoting mechanism has no effect on the |
| 918 | byte count. */ |
| 919 | |
| 920 | static void |
| 921 | ocd_put_packet (unsigned char *buf, int len) |
| 922 | { |
| 923 | unsigned char checksum; |
| 924 | unsigned char c; |
| 925 | unsigned char *packet, *packet_ptr; |
| 926 | |
| 927 | packet = alloca (len + 1 + 1); /* packet + SYN + checksum */ |
| 928 | packet_ptr = packet; |
| 929 | |
| 930 | checksum = 0; |
| 931 | |
| 932 | *packet_ptr++ = 0x55; |
| 933 | |
| 934 | while (len-- > 0) |
| 935 | { |
| 936 | c = *buf++; |
| 937 | |
| 938 | checksum += c; |
| 939 | *packet_ptr++ = c; |
| 940 | } |
| 941 | |
| 942 | *packet_ptr++ = -checksum; |
| 943 | if (SERIAL_WRITE (ocd_desc, packet, packet_ptr - packet)) |
| 944 | perror_with_name ("output_packet: write failed"); |
| 945 | } |
| 946 | #endif |
| 947 | |
| 948 | #if 0 |
| 949 | /* Get a packet from the OCD device. Timeout is only enforced for the |
| 950 | first byte of the packet. Subsequent bytes are expected to arrive in |
| 951 | time <= remote_timeout. Returns a pointer to a static buffer containing |
| 952 | the payload of the packet. *LENP contains the length of the packet. |
| 953 | */ |
| 954 | |
| 955 | static unsigned char * |
| 956 | stu_get_packet (unsigned char cmd, int *lenp, int timeout) |
| 957 | { |
| 958 | int ch; |
| 959 | int len; |
| 960 | static unsigned char buf[256 + 10], *p; |
| 961 | unsigned char checksum; |
| 962 | |
| 963 | find_packet: |
| 964 | |
| 965 | ch = get_quoted_char (timeout); |
| 966 | |
| 967 | if (ch < 0) |
| 968 | error ("get_packet (readchar): %d", ch); |
| 969 | |
| 970 | if (ch != RAW_SYN) |
| 971 | goto find_packet; |
| 972 | |
| 973 | found_syn: /* Found the start of a packet */ |
| 974 | |
| 975 | p = buf; |
| 976 | checksum = 0; |
| 977 | |
| 978 | len = get_quoted_char (remote_timeout); |
| 979 | |
| 980 | if (len == RAW_SYN) |
| 981 | goto found_syn; |
| 982 | |
| 983 | checksum += len; |
| 984 | |
| 985 | if (len == 0) |
| 986 | len = 256; |
| 987 | |
| 988 | len++; /* Include checksum */ |
| 989 | |
| 990 | while (len-- > 0) |
| 991 | { |
| 992 | ch = get_quoted_char (remote_timeout); |
| 993 | if (ch == RAW_SYN) |
| 994 | goto found_syn; |
| 995 | |
| 996 | *p++ = ch; |
| 997 | checksum += ch; |
| 998 | } |
| 999 | |
| 1000 | if (checksum != 0) |
| 1001 | goto find_packet; |
| 1002 | |
| 1003 | if (cmd != buf[0]) |
| 1004 | error ("Response phase error. Got 0x%x, expected 0x%x", buf[0], cmd); |
| 1005 | |
| 1006 | *lenp = p - buf - 1; |
| 1007 | return buf; |
| 1008 | } |
| 1009 | |
| 1010 | #else |
| 1011 | |
| 1012 | /* Get a packet from the OCD device. Timeout is only enforced for the |
| 1013 | first byte of the packet. Subsequent bytes are expected to arrive in |
| 1014 | time <= remote_timeout. Returns a pointer to a static buffer containing |
| 1015 | the payload of the packet. *LENP contains the length of the packet. |
| 1016 | */ |
| 1017 | |
| 1018 | static unsigned char * |
| 1019 | ocd_get_packet (int cmd, int *lenp, int timeout) |
| 1020 | { |
| 1021 | int ch; |
| 1022 | int len; |
| 1023 | static unsigned char packet[512]; |
| 1024 | unsigned char *packet_ptr; |
| 1025 | unsigned char checksum; |
| 1026 | |
| 1027 | ch = readchar (timeout); |
| 1028 | |
| 1029 | if (ch < 0) |
| 1030 | error ("ocd_get_packet (readchar): %d", ch); |
| 1031 | |
| 1032 | if (ch != 0x55) |
| 1033 | error ("ocd_get_packet (readchar): %d", ch); |
| 1034 | |
| 1035 | /* Found the start of a packet */ |
| 1036 | |
| 1037 | packet_ptr = packet; |
| 1038 | checksum = 0; |
| 1039 | |
| 1040 | /* Read command char. That sort of tells us how long the packet is. */ |
| 1041 | |
| 1042 | ch = readchar (timeout); |
| 1043 | |
| 1044 | if (ch < 0) |
| 1045 | error ("ocd_get_packet (readchar): %d", ch); |
| 1046 | |
| 1047 | *packet_ptr++ = ch; |
| 1048 | checksum += ch; |
| 1049 | |
| 1050 | /* Get status. */ |
| 1051 | |
| 1052 | ch = readchar (timeout); |
| 1053 | |
| 1054 | if (ch < 0) |
| 1055 | error ("ocd_get_packet (readchar): %d", ch); |
| 1056 | *packet_ptr++ = ch; |
| 1057 | checksum += ch; |
| 1058 | |
| 1059 | /* Get error code. */ |
| 1060 | |
| 1061 | ch = readchar (timeout); |
| 1062 | |
| 1063 | if (ch < 0) |
| 1064 | error ("ocd_get_packet (readchar): %d", ch); |
| 1065 | *packet_ptr++ = ch; |
| 1066 | checksum += ch; |
| 1067 | |
| 1068 | switch (ch) /* Figure out length of packet */ |
| 1069 | { |
| 1070 | case 0x7: /* Write verify error? */ |
| 1071 | len = 8; /* write address, value read back */ |
| 1072 | break; |
| 1073 | case 0x11: /* Bus error? */ |
| 1074 | /* write address, read flag */ |
| 1075 | case 0x15: /* Internal error */ |
| 1076 | len = 5; /* error code, vector */ |
| 1077 | break; |
| 1078 | default: /* Error w/no params */ |
| 1079 | len = 0; |
| 1080 | break; |
| 1081 | case 0x0: /* Normal result */ |
| 1082 | switch (packet[0]) |
| 1083 | { |
| 1084 | case OCD_AYT: /* Are You There? */ |
| 1085 | case OCD_SET_BAUD_RATE: /* Set Baud Rate */ |
| 1086 | case OCD_INIT: /* Initialize OCD device */ |
| 1087 | case OCD_SET_SPEED: /* Set Speed */ |
| 1088 | case OCD_SET_FUNC_CODE: /* Set Function Code */ |
| 1089 | case OCD_SET_CTL_FLAGS: /* Set Control Flags */ |
| 1090 | case OCD_SET_BUF_ADDR: /* Set Register Buffer Address */ |
| 1091 | case OCD_RUN: /* Run Target from PC */ |
| 1092 | case OCD_RUN_ADDR: /* Run Target from Specified Address */ |
| 1093 | case OCD_STOP: /* Stop Target */ |
| 1094 | case OCD_RESET_RUN: /* Reset Target and Run */ |
| 1095 | case OCD_RESET: /* Reset Target and Halt */ |
| 1096 | case OCD_STEP: /* Single Step */ |
| 1097 | case OCD_WRITE_REGS: /* Write Register */ |
| 1098 | case OCD_WRITE_MEM: /* Write Memory */ |
| 1099 | case OCD_FILL_MEM: /* Fill Memory */ |
| 1100 | case OCD_MOVE_MEM: /* Move Memory */ |
| 1101 | case OCD_WRITE_INT_MEM: /* Write Internal Memory */ |
| 1102 | case OCD_JUMP: /* Jump to Subroutine */ |
| 1103 | case OCD_ERASE_FLASH: /* Erase flash memory */ |
| 1104 | case OCD_PROGRAM_FLASH: /* Write flash memory */ |
| 1105 | case OCD_EXIT_MON: /* Exit the flash programming monitor */ |
| 1106 | case OCD_ENTER_MON: /* Enter the flash programming monitor */ |
| 1107 | case OCD_LOG_FILE: /* Make Wigglers.dll save Wigglers.log */ |
| 1108 | case OCD_SET_CONNECTION: /* Set type of connection in Wigglers.dll */ |
| 1109 | len = 0; |
| 1110 | break; |
| 1111 | case OCD_GET_VERSION: /* Get Version */ |
| 1112 | len = 10; |
| 1113 | break; |
| 1114 | case OCD_GET_STATUS_MASK: /* Get Status Mask */ |
| 1115 | len = 1; |
| 1116 | break; |
| 1117 | case OCD_GET_CTRS: /* Get Error Counters */ |
| 1118 | case OCD_READ_REGS: /* Read Register */ |
| 1119 | case OCD_READ_MEM: /* Read Memory */ |
| 1120 | case OCD_READ_INT_MEM: /* Read Internal Memory */ |
| 1121 | len = 257; |
| 1122 | break; |
| 1123 | default: |
| 1124 | error ("ocd_get_packet: unknown packet type 0x%x\n", ch); |
| 1125 | } |
| 1126 | } |
| 1127 | |
| 1128 | if (len == 257) /* Byte stream? */ |
| 1129 | { /* Yes, byte streams contain the length */ |
| 1130 | ch = readchar (timeout); |
| 1131 | |
| 1132 | if (ch < 0) |
| 1133 | error ("ocd_get_packet (readchar): %d", ch); |
| 1134 | *packet_ptr++ = ch; |
| 1135 | checksum += ch; |
| 1136 | len = ch; |
| 1137 | if (len == 0) |
| 1138 | len = 256; |
| 1139 | } |
| 1140 | |
| 1141 | while (len-- >= 0) /* Do rest of packet and checksum */ |
| 1142 | { |
| 1143 | ch = readchar (timeout); |
| 1144 | |
| 1145 | if (ch < 0) |
| 1146 | error ("ocd_get_packet (readchar): %d", ch); |
| 1147 | *packet_ptr++ = ch; |
| 1148 | checksum += ch; |
| 1149 | } |
| 1150 | |
| 1151 | if (checksum != 0) |
| 1152 | error ("ocd_get_packet: bad packet checksum"); |
| 1153 | |
| 1154 | if (cmd != -1 && cmd != packet[0]) |
| 1155 | error ("Response phase error. Got 0x%x, expected 0x%x", packet[0], cmd); |
| 1156 | |
| 1157 | *lenp = packet_ptr - packet - 1; /* Subtract checksum byte */ |
| 1158 | return packet; |
| 1159 | } |
| 1160 | #endif |
| 1161 | |
| 1162 | /* Execute a simple (one-byte) command. Returns a pointer to the data |
| 1163 | following the error code. */ |
| 1164 | |
| 1165 | static unsigned char * |
| 1166 | ocd_do_command (int cmd, int *statusp, int *lenp) |
| 1167 | { |
| 1168 | unsigned char buf[100], *p; |
| 1169 | int status, error_code; |
| 1170 | char errbuf[100]; |
| 1171 | |
| 1172 | unsigned char logbuf[100]; |
| 1173 | int logpktlen; |
| 1174 | |
| 1175 | buf[0] = cmd; |
| 1176 | ocd_put_packet (buf, 1); /* Send command */ |
| 1177 | p = ocd_get_packet (*buf, lenp, remote_timeout); |
| 1178 | |
| 1179 | if (*lenp < 3) |
| 1180 | error ("Truncated response packet from OCD device"); |
| 1181 | |
| 1182 | status = p[1]; |
| 1183 | error_code = p[2]; |
| 1184 | |
| 1185 | if (error_code != 0) |
| 1186 | { |
| 1187 | sprintf (errbuf, "ocd_do_command (0x%x):", cmd); |
| 1188 | ocd_error (errbuf, error_code); |
| 1189 | } |
| 1190 | |
| 1191 | if (status & OCD_FLAG_PWF) |
| 1192 | error ("OCD device can't detect VCC at BDM interface."); |
| 1193 | else if (status & OCD_FLAG_CABLE_DISC) |
| 1194 | error ("BDM cable appears to be disconnected."); |
| 1195 | |
| 1196 | *statusp = status; |
| 1197 | |
| 1198 | logbuf[0] = OCD_LOG_FILE; |
| 1199 | logbuf[1] = 3; /* close existing WIGGLERS.LOG */ |
| 1200 | ocd_put_packet (logbuf, 2); |
| 1201 | ocd_get_packet (logbuf[0], &logpktlen, remote_timeout); |
| 1202 | |
| 1203 | logbuf[0] = OCD_LOG_FILE; |
| 1204 | logbuf[1] = 2; /* append to existing WIGGLERS.LOG */ |
| 1205 | ocd_put_packet (logbuf, 2); |
| 1206 | ocd_get_packet (logbuf[0], &logpktlen, remote_timeout); |
| 1207 | |
| 1208 | return p + 3; |
| 1209 | } |
| 1210 | \f |
| 1211 | void |
| 1212 | ocd_kill (void) |
| 1213 | { |
| 1214 | /* For some mysterious reason, wait_for_inferior calls kill instead of |
| 1215 | mourn after it gets TARGET_WAITKIND_SIGNALLED. Work around it. */ |
| 1216 | if (kill_kludge) |
| 1217 | { |
| 1218 | kill_kludge = 0; |
| 1219 | target_mourn_inferior (); |
| 1220 | return; |
| 1221 | } |
| 1222 | |
| 1223 | /* Don't wait for it to die. I'm not really sure it matters whether |
| 1224 | we do or not. */ |
| 1225 | target_mourn_inferior (); |
| 1226 | } |
| 1227 | |
| 1228 | void |
| 1229 | ocd_mourn (void) |
| 1230 | { |
| 1231 | unpush_target (current_ops); |
| 1232 | generic_mourn_inferior (); |
| 1233 | } |
| 1234 | |
| 1235 | /* All we actually do is set the PC to the start address of exec_bfd, and start |
| 1236 | the program at that point. */ |
| 1237 | |
| 1238 | void |
| 1239 | ocd_create_inferior (char *exec_file, char *args, char **env) |
| 1240 | { |
| 1241 | if (args && (*args != '\000')) |
| 1242 | error ("Args are not supported by BDM."); |
| 1243 | |
| 1244 | clear_proceed_status (); |
| 1245 | proceed (bfd_get_start_address (exec_bfd), TARGET_SIGNAL_0, 0); |
| 1246 | } |
| 1247 | |
| 1248 | void |
| 1249 | ocd_load (char *args, int from_tty) |
| 1250 | { |
| 1251 | generic_load (args, from_tty); |
| 1252 | |
| 1253 | inferior_pid = 0; |
| 1254 | |
| 1255 | /* This is necessary because many things were based on the PC at the time that |
| 1256 | we attached to the monitor, which is no longer valid now that we have loaded |
| 1257 | new code (and just changed the PC). Another way to do this might be to call |
| 1258 | normal_stop, except that the stack may not be valid, and things would get |
| 1259 | horribly confused... */ |
| 1260 | |
| 1261 | clear_symtab_users (); |
| 1262 | } |
| 1263 | |
| 1264 | /* This should be defined for each target */ |
| 1265 | /* But we want to be able to compile this file for some configurations |
| 1266 | not yet supported fully */ |
| 1267 | |
| 1268 | #define BDM_BREAKPOINT {0x0,0x0,0x0,0x0} /* For ppc 8xx */ |
| 1269 | #if 0 |
| 1270 | #define BDM_BREAKPOINT {0x4a,0xfa} /* BGND insn used for CPU32 */ |
| 1271 | #endif |
| 1272 | |
| 1273 | /* BDM (at least on CPU32) uses a different breakpoint */ |
| 1274 | |
| 1275 | int |
| 1276 | ocd_insert_breakpoint (CORE_ADDR addr, char *contents_cache) |
| 1277 | { |
| 1278 | static char break_insn[] = BDM_BREAKPOINT; |
| 1279 | int val; |
| 1280 | |
| 1281 | val = target_read_memory (addr, contents_cache, sizeof (break_insn)); |
| 1282 | |
| 1283 | if (val == 0) |
| 1284 | val = target_write_memory (addr, break_insn, sizeof (break_insn)); |
| 1285 | |
| 1286 | return val; |
| 1287 | } |
| 1288 | |
| 1289 | int |
| 1290 | ocd_remove_breakpoint (CORE_ADDR addr, char *contents_cache) |
| 1291 | { |
| 1292 | static char break_insn[] = BDM_BREAKPOINT; |
| 1293 | int val; |
| 1294 | |
| 1295 | val = target_write_memory (addr, contents_cache, sizeof (break_insn)); |
| 1296 | |
| 1297 | return val; |
| 1298 | } |
| 1299 | |
| 1300 | static void |
| 1301 | bdm_command (char *args, int from_tty) |
| 1302 | { |
| 1303 | error ("bdm command must be followed by `reset'"); |
| 1304 | } |
| 1305 | |
| 1306 | static void |
| 1307 | bdm_reset_command (char *args, int from_tty) |
| 1308 | { |
| 1309 | int status, pktlen; |
| 1310 | |
| 1311 | if (!ocd_desc) |
| 1312 | error ("Not connected to OCD device."); |
| 1313 | |
| 1314 | ocd_do_command (OCD_RESET, &status, &pktlen); |
| 1315 | dcache_invalidate (target_dcache); |
| 1316 | registers_changed (); |
| 1317 | } |
| 1318 | |
| 1319 | static void |
| 1320 | bdm_restart_command (char *args, int from_tty) |
| 1321 | { |
| 1322 | int status, pktlen; |
| 1323 | |
| 1324 | if (!ocd_desc) |
| 1325 | error ("Not connected to OCD device."); |
| 1326 | |
| 1327 | ocd_do_command (OCD_RESET_RUN, &status, &pktlen); |
| 1328 | last_run_status = status; |
| 1329 | clear_proceed_status (); |
| 1330 | wait_for_inferior (); |
| 1331 | normal_stop (); |
| 1332 | } |
| 1333 | |
| 1334 | /* Temporary replacement for target_store_registers(). This prevents |
| 1335 | generic_load from trying to set the PC. */ |
| 1336 | |
| 1337 | static void |
| 1338 | noop_store_registers (int regno) |
| 1339 | { |
| 1340 | } |
| 1341 | |
| 1342 | static void |
| 1343 | bdm_update_flash_command (char *args, int from_tty) |
| 1344 | { |
| 1345 | int status, pktlen; |
| 1346 | struct cleanup *old_chain; |
| 1347 | void (*store_registers_tmp) (int); |
| 1348 | |
| 1349 | if (!ocd_desc) |
| 1350 | error ("Not connected to OCD device."); |
| 1351 | |
| 1352 | if (!args) |
| 1353 | error ("Must specify file containing new OCD code."); |
| 1354 | |
| 1355 | /* old_chain = make_cleanup (flash_cleanup, 0); */ |
| 1356 | |
| 1357 | ocd_do_command (OCD_ENTER_MON, &status, &pktlen); |
| 1358 | |
| 1359 | ocd_do_command (OCD_ERASE_FLASH, &status, &pktlen); |
| 1360 | |
| 1361 | write_mem_command = OCD_PROGRAM_FLASH; |
| 1362 | store_registers_tmp = current_target.to_store_registers; |
| 1363 | current_target.to_store_registers = noop_store_registers; |
| 1364 | |
| 1365 | generic_load (args, from_tty); |
| 1366 | |
| 1367 | current_target.to_store_registers = store_registers_tmp; |
| 1368 | write_mem_command = OCD_WRITE_MEM; |
| 1369 | |
| 1370 | ocd_do_command (OCD_EXIT_MON, &status, &pktlen); |
| 1371 | |
| 1372 | /* discard_cleanups (old_chain); */ |
| 1373 | } |
| 1374 | |
| 1375 | static void |
| 1376 | bdm_read_register_command (char *args, int from_tty) |
| 1377 | { |
| 1378 | /* XXX repeat should go on to the next register */ |
| 1379 | |
| 1380 | if (!ocd_desc) |
| 1381 | error ("Not connected to OCD device."); |
| 1382 | |
| 1383 | if (!args) |
| 1384 | error ("Must specify BDM register number."); |
| 1385 | |
| 1386 | } |
| 1387 | \f |
| 1388 | void |
| 1389 | _initialize_remote_ocd (void) |
| 1390 | { |
| 1391 | extern struct cmd_list_element *cmdlist; |
| 1392 | static struct cmd_list_element *ocd_cmd_list = NULL; |
| 1393 | |
| 1394 | add_show_from_set (add_set_cmd ("remotetimeout", no_class, |
| 1395 | var_integer, (char *) &remote_timeout, |
| 1396 | "Set timeout value for remote read.\n", &setlist), |
| 1397 | &showlist); |
| 1398 | |
| 1399 | add_prefix_cmd ("ocd", class_obscure, bdm_command, "", &ocd_cmd_list, "ocd ", |
| 1400 | 0, &cmdlist); |
| 1401 | |
| 1402 | add_cmd ("reset", class_obscure, bdm_reset_command, "", &ocd_cmd_list); |
| 1403 | add_cmd ("restart", class_obscure, bdm_restart_command, "", &ocd_cmd_list); |
| 1404 | add_cmd ("update-flash", class_obscure, bdm_update_flash_command, "", &ocd_cmd_list); |
| 1405 | /* add_cmd ("read-register", class_obscure, bdm_read_register_command, "", &ocd_cmd_list); */ |
| 1406 | } |