| 1 | /* Memory-access and commands for remote es1800 processes, for GDB. |
| 2 | Copyright (C) 1988, 1992 Free Software Foundation, Inc. |
| 3 | |
| 4 | This file is added to GDB to make it possible to do debugging via an |
| 5 | ES-1800 emulator. The code was originally written by Johan Holmberg |
| 6 | TT/SJ Ericsson Telecom AB and later modified by Johan Henriksson |
| 7 | TT/SJ. It was modified for gdb 4.0 by TX/DK Jan Nordenand by TX/DKG |
| 8 | Harald Johansen. |
| 9 | |
| 10 | This file is part of GDB. |
| 11 | |
| 12 | GDB is free software; you can redistribute it and/or modify |
| 13 | it under the terms of the GNU General Public License as published by |
| 14 | the Free Software Foundation; either version 1, or (at your option) |
| 15 | any later version. |
| 16 | |
| 17 | GDB is distributed in the hope that it will be useful, |
| 18 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 19 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 20 | GNU General Public License for more details. |
| 21 | |
| 22 | You should have received a copy of the GNU General Public License |
| 23 | along with GDB; see the file COPYING. If not, write to |
| 24 | the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ |
| 25 | |
| 26 | |
| 27 | /* Emulator communication protocol. |
| 28 | All values are encoded in ascii hex digits. |
| 29 | |
| 30 | Request |
| 31 | Command |
| 32 | Reply |
| 33 | read registers: |
| 34 | DR<cr> |
| 35 | - 0 - - 1 - - 2 - - 3 - - 4 - - 5 - -- 6 - - 7 - |
| 36 | D = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX |
| 37 | A = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX |
| 38 | PC = XXXXXX SSP = XXXXXX USP = XXXXXX SR = XXXXXXXX |
| 39 | > |
| 40 | Each byte of register data is described by two hex digits. |
| 41 | |
| 42 | write regs |
| 43 | D0=XXXXXXXX<cr> |
| 44 | >D1=XXXXXXXX<cr> |
| 45 | >D2=XXXXXXXX<cr> |
| 46 | >D3=XXXXXXXX<cr> |
| 47 | >D4=XXXXXXXX<cr> |
| 48 | >D5=XXXXXXXX<cr> |
| 49 | >D6=XXXXXXXX<cr> |
| 50 | >D7=XXXXXXXX<cr> |
| 51 | >A0=XXXXXXXX<cr> |
| 52 | >A1=XXXXXXXX<cr> |
| 53 | >A2=XXXXXXXX<cr> |
| 54 | >A3=XXXXXXXX<cr> |
| 55 | >A4=XXXXXXXX<cr> |
| 56 | >A5=XXXXXXXX<cr> |
| 57 | >A6=XXXXXXXX<cr> |
| 58 | >A7=XXXXXXXX<cr> |
| 59 | >SR=XXXXXXXX<cr> |
| 60 | >PC=XXXXXX<cr> |
| 61 | > |
| 62 | Each byte of register data is described by two hex digits. |
| 63 | |
| 64 | read mem |
| 65 | @.BAA..AA |
| 66 | $FFFFFFXX |
| 67 | > |
| 68 | AA..AA is address, XXXXXXX is the contents |
| 69 | |
| 70 | write mem |
| 71 | @.BAA..AA=$XXXXXXXX |
| 72 | > |
| 73 | AA..AA is address, XXXXXXXX is data |
| 74 | |
| 75 | cont |
| 76 | PC=$AA..AA |
| 77 | >RBK |
| 78 | R> |
| 79 | AA..AA is address to resume. If AA..AA is omitted, resume at same address. |
| 80 | |
| 81 | step |
| 82 | PC=$AA..AA |
| 83 | >STP |
| 84 | R> |
| 85 | AA..AA is address to resume. If AA..AA is omitted, resume at same address. |
| 86 | |
| 87 | kill req |
| 88 | STP |
| 89 | > |
| 90 | */ |
| 91 | |
| 92 | |
| 93 | #include <stdio.h> |
| 94 | #include <signal.h> |
| 95 | #include <sys/ioctl.h> |
| 96 | #include <sys/file.h> |
| 97 | #include <errno.h> |
| 98 | #include <ctype.h> |
| 99 | #include <string.h> |
| 100 | #include <setjmp.h> |
| 101 | #include <fcntl.h> |
| 102 | #include "defs.h" |
| 103 | #include "frame.h" |
| 104 | #include "inferior.h" |
| 105 | #include "target.h" |
| 106 | #include "wait.h" |
| 107 | #include "command.h" |
| 108 | #include "remote-utils.h" |
| 109 | #include "gdbcore.h" |
| 110 | #include "serial.h" |
| 111 | |
| 112 | /* Prototypes for local functions */ |
| 113 | |
| 114 | static void |
| 115 | es1800_child_detach PARAMS ((char *, int)); |
| 116 | |
| 117 | static void |
| 118 | es1800_child_open PARAMS ((char *, int)); |
| 119 | |
| 120 | static void |
| 121 | es1800_transparent PARAMS ((char *, int)); |
| 122 | |
| 123 | static void |
| 124 | es1800_create_inferior PARAMS ((char *, char *, char **)); |
| 125 | |
| 126 | static void |
| 127 | es1800_load PARAMS ((char *, int)); |
| 128 | |
| 129 | static void |
| 130 | es1800_kill PARAMS ((void)); |
| 131 | |
| 132 | static int |
| 133 | verify_break PARAMS ((int)); |
| 134 | |
| 135 | static int |
| 136 | es1800_remove_breakpoint PARAMS ((CORE_ADDR, char *)); |
| 137 | |
| 138 | static int |
| 139 | es1800_insert_breakpoint PARAMS ((CORE_ADDR, char *)); |
| 140 | |
| 141 | static void |
| 142 | es1800_files_info PARAMS ((struct target_ops *)); |
| 143 | |
| 144 | static int |
| 145 | es1800_xfer_inferior_memory PARAMS ((CORE_ADDR, char *, int, int, |
| 146 | struct target_ops *)); |
| 147 | |
| 148 | static void |
| 149 | es1800_prepare_to_store PARAMS ((void)); |
| 150 | |
| 151 | static int es1800_wait PARAMS ((int, struct target_waitstatus *)); |
| 152 | |
| 153 | static void es1800_resume PARAMS ((int, int, enum target_signal)); |
| 154 | |
| 155 | static void |
| 156 | es1800_detach PARAMS ((char *, int)); |
| 157 | |
| 158 | static void |
| 159 | es1800_attach PARAMS ((char *, int)); |
| 160 | |
| 161 | static int |
| 162 | damn_b PARAMS ((char *)); |
| 163 | |
| 164 | static void |
| 165 | es1800_open PARAMS ((char *, int)); |
| 166 | |
| 167 | static void |
| 168 | es1800_timer PARAMS ((void)); |
| 169 | |
| 170 | static void |
| 171 | es1800_reset PARAMS ((char *)); |
| 172 | |
| 173 | static void |
| 174 | es1800_request_quit PARAMS ((void)); |
| 175 | |
| 176 | static int |
| 177 | readchar PARAMS ((void)); |
| 178 | |
| 179 | static void |
| 180 | expect PARAMS ((char *, int)); |
| 181 | |
| 182 | static void |
| 183 | expect_prompt PARAMS ((void)); |
| 184 | |
| 185 | static void |
| 186 | download PARAMS ((FILE *, int, int)); |
| 187 | |
| 188 | #if 0 |
| 189 | static void |
| 190 | bfd_copy PARAMS ((bfd *, bfd *)); |
| 191 | #endif |
| 192 | |
| 193 | static void |
| 194 | get_break_addr PARAMS ((int, CORE_ADDR *)); |
| 195 | |
| 196 | static int |
| 197 | fromhex PARAMS ((int)); |
| 198 | |
| 199 | static int |
| 200 | tohex PARAMS ((int)); |
| 201 | |
| 202 | static void |
| 203 | es1800_close PARAMS ((int)); |
| 204 | |
| 205 | static void |
| 206 | es1800_fetch_registers PARAMS ((void)); |
| 207 | |
| 208 | static void |
| 209 | es1800_fetch_register PARAMS ((int)); |
| 210 | |
| 211 | static void |
| 212 | es1800_store_register PARAMS ((int)); |
| 213 | |
| 214 | static void |
| 215 | es1800_read_bytes PARAMS ((CORE_ADDR, char *, int)); |
| 216 | |
| 217 | static void |
| 218 | es1800_write_bytes PARAMS ((CORE_ADDR, char *, int)); |
| 219 | |
| 220 | static void |
| 221 | send_with_reply PARAMS ((char *, char *, int)); |
| 222 | |
| 223 | static void |
| 224 | send_command PARAMS ((char *)); |
| 225 | |
| 226 | static void |
| 227 | send PARAMS ((char *)); |
| 228 | |
| 229 | static void |
| 230 | getmessage PARAMS ((char *, int)); |
| 231 | |
| 232 | static void |
| 233 | es1800_mourn_inferior PARAMS ((void)); |
| 234 | |
| 235 | static void |
| 236 | es1800_create_break_insn PARAMS ((char *, int)); |
| 237 | |
| 238 | static void |
| 239 | es1800_init_break PARAMS ((char *, int)); |
| 240 | |
| 241 | /* Local variables */ |
| 242 | |
| 243 | /* FIXME: Convert this to use "set remotedebug" instead. */ |
| 244 | #define LOG_FILE "es1800.log" |
| 245 | #if defined (LOG_FILE) |
| 246 | static FILE *log_file; |
| 247 | #endif |
| 248 | |
| 249 | extern struct target_ops es1800_ops; /* Forward decl */ |
| 250 | extern struct target_ops es1800_child_ops; /* Forward decl */ |
| 251 | |
| 252 | static int kiodebug; |
| 253 | static int timeout = 100; |
| 254 | static char *savename; /* Name of i/o device used */ |
| 255 | static serial_ttystate es1800_saved_ttystate; |
| 256 | static int es1800_fc_save; /* Save fcntl state */ |
| 257 | |
| 258 | /* indicates that the emulator uses 32-bit data-adress (68020-mode) |
| 259 | instead of 24-bit (68000 -mode) */ |
| 260 | |
| 261 | static int m68020; |
| 262 | |
| 263 | #define MODE (m68020 ? "M68020" : "M68000" ) |
| 264 | #define ES1800_BREAK_VEC (0xf) |
| 265 | |
| 266 | /* Descriptor for I/O to remote machine. Initialize it to NULL so that |
| 267 | es1800_open knows that we don't have a file open when the program |
| 268 | starts. */ |
| 269 | |
| 270 | static serial_t es1800_desc = NULL; |
| 271 | |
| 272 | #define PBUFSIZ 1000 |
| 273 | #define HDRLEN sizeof("@.BAAAAAAAA=$VV\r") |
| 274 | |
| 275 | /* Maximum number of bytes to read/write at once. The value here |
| 276 | is chosen to fill up a packet. */ |
| 277 | |
| 278 | #define MAXBUFBYTES ((PBUFSIZ-150)*16/75 ) |
| 279 | |
| 280 | static int es1800_break_vec = 0; |
| 281 | static char es1800_break_insn[2]; |
| 282 | static long es1800_break_address; |
| 283 | static void (*old_sigint)(); /* Old signal-handler for sigint */ |
| 284 | static jmp_buf interrupt; |
| 285 | |
| 286 | /* Local signalhandler to allow breaking tranfers or program run. |
| 287 | Rely on global variables: old_sigint(), interrupt */ |
| 288 | |
| 289 | static void |
| 290 | es1800_request_quit () |
| 291 | { |
| 292 | /* restore original signalhandler */ |
| 293 | signal (SIGINT, old_sigint); |
| 294 | longjmp (interrupt, 1); |
| 295 | } |
| 296 | |
| 297 | |
| 298 | /* Reset emulator. |
| 299 | Sending reset character(octal 32) to emulator. |
| 300 | quit - return to '(esgdb)' prompt or continue */ |
| 301 | |
| 302 | static void |
| 303 | es1800_reset (quit) |
| 304 | char *quit; |
| 305 | { |
| 306 | char buf[80]; |
| 307 | |
| 308 | if (quit) |
| 309 | { |
| 310 | printf ("\nResetting emulator... "); |
| 311 | } |
| 312 | strcpy (buf, "\032"); |
| 313 | send (buf); |
| 314 | expect_prompt (); |
| 315 | if (quit) |
| 316 | { |
| 317 | error ("done\n"); |
| 318 | } |
| 319 | } |
| 320 | |
| 321 | |
| 322 | /* Open a connection to a remote debugger and push the new target |
| 323 | onto the stack. Check if the emulator is responding and find out |
| 324 | what kind of processor the emulator is connected to. |
| 325 | Initiate the breakpoint handling in the emulator. |
| 326 | |
| 327 | name - the filename used for communication (ex. '/dev/tta') |
| 328 | from_tty - says whether to be verbose or not */ |
| 329 | |
| 330 | static void |
| 331 | es1800_open (name, from_tty) |
| 332 | char *name; |
| 333 | int from_tty; |
| 334 | { |
| 335 | char buf[PBUFSIZ]; |
| 336 | char *p; |
| 337 | int i, fcflag; |
| 338 | |
| 339 | m68020 = 0; |
| 340 | |
| 341 | if (!name) /* no device name given in target command */ |
| 342 | { |
| 343 | error_no_arg ("serial port device name"); |
| 344 | } |
| 345 | |
| 346 | target_preopen (from_tty); |
| 347 | es1800_close (0); |
| 348 | |
| 349 | /* open the device and configure it for communication */ |
| 350 | |
| 351 | #ifndef DEBUG_STDIN |
| 352 | |
| 353 | es1800_desc = SERIAL_OPEN (name); |
| 354 | if (es1800_desc == NULL) |
| 355 | { |
| 356 | perror_with_name (name); |
| 357 | } |
| 358 | savename = savestring (name, strlen (name)); |
| 359 | |
| 360 | es1800_saved_ttystate = SERIAL_GET_TTY_STATE (es1800_desc); |
| 361 | |
| 362 | if ((fcflag = fcntl (es1800_desc->fd, F_GETFL, 0)) == -1) |
| 363 | { |
| 364 | perror_with_name ("fcntl serial"); |
| 365 | } |
| 366 | es1800_fc_save = fcflag; |
| 367 | |
| 368 | fcflag = (fcflag & (FREAD | FWRITE)); /* mask out any funny stuff */ |
| 369 | if (fcntl (es1800_desc->fd, F_SETFL, fcflag) == -1) |
| 370 | { |
| 371 | perror_with_name ("fcntl serial"); |
| 372 | } |
| 373 | |
| 374 | if (baud_rate != -1) |
| 375 | { |
| 376 | if (SERIAL_SETBAUDRATE (es1800_desc, baud_rate)) |
| 377 | { |
| 378 | SERIAL_CLOSE (es1800_desc); |
| 379 | perror_with_name (name); |
| 380 | } |
| 381 | } |
| 382 | |
| 383 | SERIAL_RAW (es1800_desc); |
| 384 | |
| 385 | /* If there is something sitting in the buffer we might take it as a |
| 386 | response to a command, which would be bad. */ |
| 387 | SERIAL_FLUSH_INPUT (es1800_desc); |
| 388 | |
| 389 | #endif /* DEBUG_STDIN */ |
| 390 | |
| 391 | push_target (&es1800_ops); /* Switch to using remote target now */ |
| 392 | if (from_tty) |
| 393 | { |
| 394 | printf ("Remote ES1800 debugging using %s\n", name); |
| 395 | } |
| 396 | |
| 397 | #if defined (LOG_FILE) |
| 398 | |
| 399 | log_file = fopen (LOG_FILE, "w"); |
| 400 | if (log_file == NULL) |
| 401 | { |
| 402 | perror_with_name (LOG_FILE); |
| 403 | } |
| 404 | |
| 405 | #endif /* LOG_FILE */ |
| 406 | |
| 407 | /* Hello? Are you there?, also check mode */ |
| 408 | |
| 409 | /* send_with_reply( "DB 0 TO 1", buf, sizeof(buf)); */ |
| 410 | /* for (p = buf, i = 0; *p++ =='0';) */ /* count the number of zeros */ |
| 411 | /* i++; */ |
| 412 | |
| 413 | send ("\032"); |
| 414 | getmessage (buf, sizeof (buf)); /* send reset character */ |
| 415 | |
| 416 | if (from_tty) |
| 417 | { |
| 418 | printf ("Checking mode.... "); |
| 419 | } |
| 420 | /* m68020 = (i==8); */ /* if eight zeros then we are in m68020 mode */ |
| 421 | |
| 422 | /* What kind of processor am i talking to ?*/ |
| 423 | p = buf; |
| 424 | while (*p++ != '\n') {;} |
| 425 | while (*p++ != '\n') {;} |
| 426 | while (*p++ != '\n') {;} |
| 427 | for (i = 0; i < 20; i++, p++) {;} |
| 428 | m68020 = !strncmp (p, "68020", 5); |
| 429 | if (from_tty) |
| 430 | { |
| 431 | printf ("You are in %s(%c%c%c%c%c)-mode\n", MODE, p[0], p[1], p[2], |
| 432 | p[3], p[4]); |
| 433 | } |
| 434 | |
| 435 | /* if no init_break statement is present in .gdb file we have to check |
| 436 | whether to download a breakpoint routine or not */ |
| 437 | |
| 438 | #if 0 |
| 439 | if ((es1800_break_vec == 0) || (verify_break (es1800_break_vec) != 0) |
| 440 | && query ("No breakpoint routine in ES 1800 emulator!\nDownload a breakpoint routine to the emulator? ")) |
| 441 | { |
| 442 | CORE_ADDR memaddress; |
| 443 | printf ("Give the start address of the breakpoint routine: "); |
| 444 | scanf ("%li", &memaddress); |
| 445 | es1800_init_break ((es1800_break_vec ? es1800_break_vec : |
| 446 | ES1800_BREAK_VEC), memaddress); |
| 447 | } |
| 448 | #endif |
| 449 | |
| 450 | } |
| 451 | |
| 452 | /* Close out all files and local state before this target loses control. |
| 453 | quitting - are we quitting gdb now? */ |
| 454 | |
| 455 | static void |
| 456 | es1800_close (quitting) |
| 457 | int quitting; |
| 458 | { |
| 459 | if (es1800_desc != NULL) |
| 460 | { |
| 461 | printf ("\nClosing connection to emulator...\n"); |
| 462 | if (SERIAL_SET_TTY_STATE (es1800_desc, es1800_saved_ttystate) < 0) |
| 463 | print_sys_errmsg ("warning: unable to restore tty state", errno); |
| 464 | fcntl (es1800_desc->fd, F_SETFL, es1800_fc_save); |
| 465 | SERIAL_CLOSE (es1800_desc); |
| 466 | es1800_desc = NULL; |
| 467 | } |
| 468 | if (savename != NULL) |
| 469 | { |
| 470 | free (savename); |
| 471 | } |
| 472 | savename = NULL; |
| 473 | |
| 474 | #if defined (LOG_FILE) |
| 475 | |
| 476 | if (log_file != NULL) |
| 477 | { |
| 478 | if (ferror (log_file)) |
| 479 | { |
| 480 | printf ("Error writing log file.\n"); |
| 481 | } |
| 482 | if (fclose (log_file) != 0) |
| 483 | { |
| 484 | printf ("Error closing log file.\n"); |
| 485 | } |
| 486 | log_file = NULL; |
| 487 | } |
| 488 | |
| 489 | #endif /* LOG_FILE */ |
| 490 | |
| 491 | } |
| 492 | |
| 493 | /* Attaches to a process on the target side |
| 494 | proc_id - the id of the process to be attached. |
| 495 | from_tty - says whether to be verbose or not */ |
| 496 | |
| 497 | static void |
| 498 | es1800_attach (args, from_tty) |
| 499 | char *args; |
| 500 | int from_tty; |
| 501 | { |
| 502 | error ("Cannot attach to pid %s, this feature is not implemented yet.", |
| 503 | args); |
| 504 | } |
| 505 | |
| 506 | |
| 507 | /* Takes a program previously attached to and detaches it. |
| 508 | We better not have left any breakpoints |
| 509 | in the program or it'll die when it hits one. |
| 510 | Close the open connection to the remote debugger. |
| 511 | Use this when you want to detach and do something else |
| 512 | with your gdb. |
| 513 | |
| 514 | args - arguments given to the 'detach' command |
| 515 | from_tty - says whether to be verbose or not */ |
| 516 | |
| 517 | static void |
| 518 | es1800_detach (args, from_tty) |
| 519 | char *args; |
| 520 | int from_tty; |
| 521 | { |
| 522 | if (args) |
| 523 | { |
| 524 | error ("Argument given to \"detach\" when remotely debugging."); |
| 525 | } |
| 526 | pop_target (); |
| 527 | if (from_tty) |
| 528 | { |
| 529 | printf ("Ending es1800 remote debugging.\n"); |
| 530 | } |
| 531 | } |
| 532 | |
| 533 | |
| 534 | /* Tell the remote machine to resume. |
| 535 | step - single-step or run free |
| 536 | siggnal - the signal value to be given to the target (0 = no signal) */ |
| 537 | |
| 538 | static void |
| 539 | es1800_resume (pid, step, siggnal) |
| 540 | int pid; |
| 541 | int step; |
| 542 | enum target_signal siggnal; |
| 543 | { |
| 544 | char buf[PBUFSIZ]; |
| 545 | |
| 546 | if (siggnal) |
| 547 | { |
| 548 | error ("Can't send signals to a remote system."); |
| 549 | } |
| 550 | if (step) |
| 551 | { |
| 552 | strcpy (buf,"STP\r"); |
| 553 | send (buf); |
| 554 | } |
| 555 | else |
| 556 | { |
| 557 | send_command ("RBK"); |
| 558 | } |
| 559 | } |
| 560 | |
| 561 | /* Wait until the remote machine stops, then return, |
| 562 | storing status in STATUS just as `wait' would. |
| 563 | status - */ |
| 564 | |
| 565 | static int |
| 566 | es1800_wait (pid, status) |
| 567 | int pid; |
| 568 | struct target_waitstatus *status; |
| 569 | { |
| 570 | unsigned char buf[PBUFSIZ]; |
| 571 | int old_timeout = timeout; |
| 572 | |
| 573 | status->kind = TARGET_WAITKIND_EXITED; |
| 574 | status->value.integer = 0; |
| 575 | |
| 576 | timeout = 0; /* Don't time out -- user program is running. */ |
| 577 | if (!setjmp (interrupt)) |
| 578 | { |
| 579 | old_sigint = signal (SIGINT, es1800_request_quit); |
| 580 | while (1) |
| 581 | { |
| 582 | getmessage (buf, sizeof(buf)); |
| 583 | if (strncmp ( buf, "\r\n* BREAK *", 11) == 0) |
| 584 | { |
| 585 | status->kind = TARGET_WAITKIND_STOPPED; |
| 586 | status->value.sig = TARGET_SIGNAL_TRAP; |
| 587 | send_command ("STP"); /* Restore stack and PC and such */ |
| 588 | if (m68020) |
| 589 | { |
| 590 | send_command ("STP"); |
| 591 | } |
| 592 | break; |
| 593 | } |
| 594 | if (strncmp (buf, "STP\r\n ", 6) == 0) |
| 595 | { |
| 596 | status->kind = TARGET_WAITKIND_STOPPED; |
| 597 | status->value.sig = TARGET_SIGNAL_TRAP; |
| 598 | break; |
| 599 | } |
| 600 | if (buf[strlen (buf) - 2] == 'R') |
| 601 | { |
| 602 | printf ("Unexpected emulator reply: \n%s\n", buf); |
| 603 | } |
| 604 | else |
| 605 | { |
| 606 | printf ("Unexpected stop: \n%s\n", buf); |
| 607 | status->kind = TARGET_WAITKIND_STOPPED; |
| 608 | status->value.sig = TARGET_SIGNAL_QUIT; |
| 609 | break; |
| 610 | } |
| 611 | } |
| 612 | } |
| 613 | else |
| 614 | { |
| 615 | fflush (stdin); |
| 616 | printf ("\nStopping emulator..."); |
| 617 | if (!setjmp (interrupt)) |
| 618 | { |
| 619 | old_sigint = signal (SIGINT, es1800_request_quit); |
| 620 | send_command ("STP"); |
| 621 | printf (" emulator stopped\n"); |
| 622 | status->kind = TARGET_WAITKIND_STOPPED; |
| 623 | status->value.sig = TARGET_SIGNAL_INT; |
| 624 | } |
| 625 | else |
| 626 | { |
| 627 | fflush (stdin); |
| 628 | es1800_reset ((char*) 1); |
| 629 | } |
| 630 | } |
| 631 | signal (SIGINT, old_sigint); |
| 632 | timeout = old_timeout; |
| 633 | return (0); |
| 634 | } |
| 635 | |
| 636 | |
| 637 | /* Fetch register values from remote machine. |
| 638 | regno - the register to be fetched (fetch all registers if -1) */ |
| 639 | |
| 640 | static void |
| 641 | es1800_fetch_register (regno) |
| 642 | int regno; |
| 643 | { |
| 644 | char buf[PBUFSIZ]; |
| 645 | int k; |
| 646 | int r; |
| 647 | char *p; |
| 648 | static char regtab[18][4] = |
| 649 | { |
| 650 | "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ", |
| 651 | "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP", |
| 652 | "SR ", "PC " |
| 653 | }; |
| 654 | |
| 655 | if ((regno < 15) || (regno == 16) || (regno == 17)) |
| 656 | { |
| 657 | r = regno * 4; |
| 658 | send_with_reply (regtab[regno], buf, sizeof (buf)); |
| 659 | p = buf; |
| 660 | for (k = 0; k < 4; k++) |
| 661 | { |
| 662 | if ((p[k*2 + 1] == 0) || (p[k*2 + 2] == 0)) |
| 663 | { |
| 664 | error ("Emulator reply is too short: %s", buf); |
| 665 | } |
| 666 | registers[r++] = (fromhex (p[k*2 + 1]) * 16) + fromhex (p[k*2 + 2]); |
| 667 | } |
| 668 | } |
| 669 | else |
| 670 | { |
| 671 | es1800_fetch_registers (); |
| 672 | } |
| 673 | } |
| 674 | |
| 675 | /* Read the remote registers into REGISTERS. |
| 676 | Always fetches all registers. */ |
| 677 | |
| 678 | static void |
| 679 | es1800_fetch_registers () |
| 680 | { |
| 681 | char buf[PBUFSIZ]; |
| 682 | char SR_buf[PBUFSIZ]; |
| 683 | int i; |
| 684 | int k; |
| 685 | int r; |
| 686 | char *p; |
| 687 | |
| 688 | send_with_reply ("DR", buf, sizeof (buf)); |
| 689 | |
| 690 | /* Reply is edited to a string that describes registers byte by byte, |
| 691 | each byte encoded as two hex characters. */ |
| 692 | |
| 693 | p = buf; |
| 694 | r = 0; |
| 695 | |
| 696 | /* parsing row one - D0-D7-registers */ |
| 697 | |
| 698 | while (*p++ != '\n') {;} |
| 699 | for (i = 4; i < 70; i += (i == 39 ? 3 : 1)) |
| 700 | { |
| 701 | for (k = 0; k < 4; k++) |
| 702 | { |
| 703 | if (p[i+0] == 0 || p[i+1] == 0) |
| 704 | { |
| 705 | error ("Emulator reply is too short: %s", buf); |
| 706 | } |
| 707 | registers[r++] = (fromhex (p[i+0]) * 16) + fromhex (p[i+1]); |
| 708 | i += 2; |
| 709 | } |
| 710 | } |
| 711 | p += i; |
| 712 | |
| 713 | /* parsing row two - A0-A6-registers */ |
| 714 | |
| 715 | while (*p++ != '\n') {;} |
| 716 | for (i = 4; i < 61; i += (i == 39 ? 3 : 1)) |
| 717 | { |
| 718 | for (k = 0; k < 4; k++) |
| 719 | { |
| 720 | if (p[i+0] == 0 || p[i+1] == 0) |
| 721 | { |
| 722 | error ("Emulator reply is too short: %s", buf); |
| 723 | } |
| 724 | registers[r++] = (fromhex (p[i+0])) * 16 + fromhex (p[i+1]); |
| 725 | i += 2; |
| 726 | } |
| 727 | } |
| 728 | p += i; |
| 729 | |
| 730 | while (*p++ != '\n') {;} |
| 731 | |
| 732 | /* fetch SSP-, SR- and PC-registers */ |
| 733 | |
| 734 | /* first - check STATUS-word and decide which stackpointer to use */ |
| 735 | |
| 736 | send_with_reply ("SR", SR_buf, sizeof (SR_buf)); |
| 737 | p = SR_buf; |
| 738 | p += 5; |
| 739 | |
| 740 | if (m68020) |
| 741 | { |
| 742 | if (*p == '3') /* use masterstackpointer MSP */ |
| 743 | { |
| 744 | send_with_reply ("MSP", buf, sizeof (buf)); |
| 745 | } |
| 746 | else if (*p == '2') /* use interruptstackpointer ISP */ |
| 747 | { |
| 748 | send_with_reply ("ISP", buf, sizeof (buf)); |
| 749 | } |
| 750 | else /* use userstackpointer USP */ |
| 751 | { |
| 752 | send_with_reply ("USP", buf, sizeof (buf)); |
| 753 | } |
| 754 | p = buf; |
| 755 | for (k = 0; k<4; k++) |
| 756 | { |
| 757 | if (p[k*2+1] == 0 || p[k*2+2] == 0) |
| 758 | { |
| 759 | error ("Emulator reply is too short: %s", buf); |
| 760 | } |
| 761 | registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]); |
| 762 | } |
| 763 | |
| 764 | p = SR_buf; |
| 765 | for (k = 0; k < 4; k++) |
| 766 | { |
| 767 | if (p[k*2+1] == 0 || p[k*2+2] == 0) |
| 768 | { |
| 769 | error ("Emulator reply is too short: %s", buf); |
| 770 | } |
| 771 | registers[r++] = |
| 772 | fromhex (SR_buf[k*2+1]) * 16 + fromhex (SR_buf[k*2+2]); |
| 773 | } |
| 774 | send_with_reply ("PC", buf, sizeof (buf)); |
| 775 | p = buf; |
| 776 | for (k = 0; k<4; k++) |
| 777 | { |
| 778 | if (p[k*2+1] == 0 || p[k*2+2] == 0) |
| 779 | { |
| 780 | error ("Emulator reply is too short: %s", buf); |
| 781 | } |
| 782 | registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]); |
| 783 | } |
| 784 | } |
| 785 | else /* 68000-mode */ |
| 786 | { |
| 787 | if (*p == '2') /* use supervisorstackpointer SSP */ |
| 788 | { |
| 789 | send_with_reply ("SSP", buf, sizeof (buf)); |
| 790 | } |
| 791 | else /* use userstackpointer USP */ |
| 792 | { |
| 793 | send_with_reply ("USP", buf, sizeof (buf)); |
| 794 | } |
| 795 | |
| 796 | /* fetch STACKPOINTER */ |
| 797 | |
| 798 | p = buf; |
| 799 | for (k = 0; k < 4; k++) |
| 800 | { |
| 801 | if (p[k*2 + 1] == 0 || p[k*2 + 2] == 0) |
| 802 | { |
| 803 | error ("Emulator reply is too short: %s", buf); |
| 804 | } |
| 805 | registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]); |
| 806 | } |
| 807 | |
| 808 | /* fetch STATUS */ |
| 809 | |
| 810 | p = SR_buf; |
| 811 | for (k = 0; k < 4; k++) |
| 812 | { |
| 813 | if (p[k*2+1] == 0 || p[k*2+2] == 0) |
| 814 | { |
| 815 | error ("Emulator reply is too short: %s", buf); |
| 816 | } |
| 817 | registers[r++] = |
| 818 | fromhex (SR_buf[k*2+1]) * 16 + fromhex (SR_buf[k*2+2]); |
| 819 | } |
| 820 | |
| 821 | /* fetch PC */ |
| 822 | |
| 823 | send_with_reply ("PC", buf, sizeof (buf)); |
| 824 | p = buf; |
| 825 | for (k = 0; k < 4; k++) |
| 826 | { |
| 827 | if (p[k*2+1] == 0 || p[k*2+2] == 0) |
| 828 | { |
| 829 | error ("Emulator reply is too short: %s", buf); |
| 830 | } |
| 831 | registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]); |
| 832 | } |
| 833 | } |
| 834 | } |
| 835 | |
| 836 | /* Store register value, located in REGISTER, on the target processor. |
| 837 | regno - the register-number of the register to store |
| 838 | (-1 means store them all) |
| 839 | FIXME: Return errno value. */ |
| 840 | |
| 841 | static void |
| 842 | es1800_store_register(regno) |
| 843 | int regno; |
| 844 | { |
| 845 | |
| 846 | static char regtab[18][4] = |
| 847 | { |
| 848 | "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ", |
| 849 | "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP", |
| 850 | "SR ", "PC " |
| 851 | }; |
| 852 | |
| 853 | char buf[PBUFSIZ]; |
| 854 | char SR_buf[PBUFSIZ]; |
| 855 | char stack_pointer[4]; |
| 856 | char *p; |
| 857 | int i; |
| 858 | int j; |
| 859 | int k; |
| 860 | unsigned char *r; |
| 861 | |
| 862 | r = (unsigned char *) registers; |
| 863 | |
| 864 | if (regno == -1) /* write all registers */ |
| 865 | { |
| 866 | j = 0; |
| 867 | k = 18; |
| 868 | } |
| 869 | else /* write one register */ |
| 870 | { |
| 871 | j = regno; |
| 872 | k = regno+1; |
| 873 | r += regno * 4; |
| 874 | } |
| 875 | |
| 876 | if ((regno == -1) || (regno == 15)) |
| 877 | { |
| 878 | /* fetch current status */ |
| 879 | send_with_reply ("SR", SR_buf, sizeof (SR_buf)); |
| 880 | p = SR_buf; |
| 881 | p += 5; |
| 882 | if (m68020) |
| 883 | { |
| 884 | if (*p == '3') /* use masterstackpointer MSP */ |
| 885 | { |
| 886 | strcpy (stack_pointer,"MSP"); |
| 887 | } |
| 888 | else |
| 889 | { |
| 890 | if (*p == '2') /* use interruptstackpointer ISP */ |
| 891 | { |
| 892 | strcpy (stack_pointer,"ISP"); |
| 893 | } |
| 894 | else |
| 895 | { |
| 896 | strcpy (stack_pointer,"USP"); /* use userstackpointer USP */ |
| 897 | } |
| 898 | } |
| 899 | } |
| 900 | else /* 68000-mode */ |
| 901 | { |
| 902 | if (*p == '2') /* use supervisorstackpointer SSP */ |
| 903 | { |
| 904 | strcpy (stack_pointer,"SSP"); |
| 905 | } |
| 906 | else |
| 907 | { |
| 908 | strcpy (stack_pointer,"USP");/* use userstackpointer USP */ |
| 909 | } |
| 910 | } |
| 911 | strcpy (regtab[15],stack_pointer); |
| 912 | } |
| 913 | |
| 914 | for (i = j; i<k; i++) |
| 915 | { |
| 916 | buf[0] = regtab[i][0]; |
| 917 | buf[1] = regtab[i][1]; |
| 918 | buf[2] = regtab[i][2]; |
| 919 | buf[3] = '='; |
| 920 | buf[4] = '$'; |
| 921 | buf[5] = tohex ((*r >> 4) & 0x0f); |
| 922 | buf[6] = tohex (*r++ & 0x0f); |
| 923 | buf[7] = tohex ((*r >> 4) & 0x0f); |
| 924 | buf[8] = tohex (*r++ & 0x0f); |
| 925 | buf[9] = tohex ((*r >> 4) & 0x0f); |
| 926 | buf[10] = tohex (*r++ & 0x0f); |
| 927 | buf[11] = tohex ((*r >> 4) & 0x0f); |
| 928 | buf[12] = tohex (*r++ & 0x0f); |
| 929 | buf[13] = 0; |
| 930 | |
| 931 | send_with_reply (buf, buf, sizeof (buf)); /* FIXME, reply not used? */ |
| 932 | } |
| 933 | } |
| 934 | |
| 935 | |
| 936 | /* Prepare to store registers. */ |
| 937 | |
| 938 | static void |
| 939 | es1800_prepare_to_store () |
| 940 | { |
| 941 | /* Do nothing, since we can store individual regs */ |
| 942 | } |
| 943 | |
| 944 | /* Convert hex digit A to a number. */ |
| 945 | |
| 946 | static int |
| 947 | fromhex (a) |
| 948 | int a; |
| 949 | { |
| 950 | if (a >= '0' && a <= '9') |
| 951 | { |
| 952 | return a - '0'; |
| 953 | } |
| 954 | else if (a >= 'a' && a <= 'f') |
| 955 | { |
| 956 | return a - 'a' + 10; |
| 957 | } |
| 958 | else if (a >= 'A' && a <= 'F') |
| 959 | { |
| 960 | return a - 'A' + 10; |
| 961 | } |
| 962 | else |
| 963 | { |
| 964 | error ("Reply contains invalid hex digit"); |
| 965 | } |
| 966 | return (-1); |
| 967 | } |
| 968 | |
| 969 | |
| 970 | /* Convert number NIB to a hex digit. */ |
| 971 | |
| 972 | static int |
| 973 | tohex (nib) |
| 974 | int nib; |
| 975 | { |
| 976 | if (nib < 10) |
| 977 | { |
| 978 | return ('0' + nib); |
| 979 | } |
| 980 | else |
| 981 | { |
| 982 | return ('A' + nib - 10); |
| 983 | } |
| 984 | } |
| 985 | |
| 986 | /* Read or write LEN bytes from inferior memory at MEMADDR, transferring |
| 987 | to or from debugger address MYADDR. Write to inferior if WRITE is |
| 988 | nonzero. Returns length of data written or read; 0 for error. |
| 989 | |
| 990 | memaddr - the target's address |
| 991 | myaddr - gdb's address |
| 992 | len - number of bytes |
| 993 | write - write if != 0 otherwise read */ |
| 994 | |
| 995 | static int |
| 996 | es1800_xfer_inferior_memory (memaddr, myaddr, len, write, tops) |
| 997 | CORE_ADDR memaddr; |
| 998 | char *myaddr; |
| 999 | int len; |
| 1000 | int write; |
| 1001 | struct target_ops *tops; /* Unused */ |
| 1002 | { |
| 1003 | int origlen = len; |
| 1004 | int xfersize; |
| 1005 | |
| 1006 | while (len > 0) |
| 1007 | { |
| 1008 | xfersize = len > MAXBUFBYTES ? MAXBUFBYTES : len; |
| 1009 | if (write) |
| 1010 | { |
| 1011 | es1800_write_bytes (memaddr, myaddr, xfersize); |
| 1012 | } |
| 1013 | else |
| 1014 | { |
| 1015 | es1800_read_bytes (memaddr, myaddr, xfersize); |
| 1016 | } |
| 1017 | memaddr += xfersize; |
| 1018 | myaddr += xfersize; |
| 1019 | len -= xfersize; |
| 1020 | } |
| 1021 | return (origlen); /* no error possible */ |
| 1022 | } |
| 1023 | |
| 1024 | |
| 1025 | /* Write memory data directly to the emulator. |
| 1026 | This does not inform the data cache; the data cache uses this. |
| 1027 | MEMADDR is the address in the remote memory space. |
| 1028 | MYADDR is the address of the buffer in our space. |
| 1029 | LEN is the number of bytes. |
| 1030 | |
| 1031 | memaddr - the target's address |
| 1032 | myaddr - gdb's address |
| 1033 | len - number of bytes */ |
| 1034 | |
| 1035 | static void |
| 1036 | es1800_write_bytes (memaddr, myaddr, len) |
| 1037 | CORE_ADDR memaddr; |
| 1038 | char *myaddr; |
| 1039 | int len; |
| 1040 | { |
| 1041 | char buf[PBUFSIZ]; |
| 1042 | int i; |
| 1043 | char *p; |
| 1044 | |
| 1045 | p = myaddr; |
| 1046 | for (i = 0; i < len; i++) |
| 1047 | { |
| 1048 | sprintf (buf, "@.B$%x=$%x", memaddr+i, (*p++) & 0xff); |
| 1049 | send_with_reply (buf, buf, sizeof (buf)); /* FIXME send_command? */ |
| 1050 | } |
| 1051 | } |
| 1052 | |
| 1053 | |
| 1054 | /* Read memory data directly from the emulator. |
| 1055 | This does not use the data cache; the data cache uses this. |
| 1056 | |
| 1057 | memaddr - the target's address |
| 1058 | myaddr - gdb's address |
| 1059 | len - number of bytes */ |
| 1060 | |
| 1061 | static void |
| 1062 | es1800_read_bytes (memaddr, myaddr, len) |
| 1063 | CORE_ADDR memaddr; |
| 1064 | char *myaddr; |
| 1065 | int len; |
| 1066 | { |
| 1067 | static int DB_tab[16] = {8,11,14,17,20,23,26,29,34,37,40,43,46,49,52,55}; |
| 1068 | char buf[PBUFSIZ]; |
| 1069 | int i; |
| 1070 | int low_addr; |
| 1071 | char *p; |
| 1072 | char *b; |
| 1073 | |
| 1074 | if (len > PBUFSIZ / 2 - 1) |
| 1075 | { |
| 1076 | abort (); |
| 1077 | } |
| 1078 | |
| 1079 | if (len == 1) /* The emulator does not like expressions like: */ |
| 1080 | { |
| 1081 | len = 2; /* DB.B $20018 TO $20018 */ |
| 1082 | } |
| 1083 | |
| 1084 | /* Reply describes registers byte by byte, each byte encoded as two hex |
| 1085 | characters. */ |
| 1086 | |
| 1087 | sprintf (buf, "DB.B $%x TO $%x", memaddr, memaddr+len-1); |
| 1088 | send_with_reply (buf, buf, sizeof (buf)); |
| 1089 | b = buf; |
| 1090 | low_addr = memaddr&0x0f; |
| 1091 | for (i = low_addr; i < low_addr + len; i++) |
| 1092 | { |
| 1093 | if ((!(i % 16)) && i) |
| 1094 | { /* if (i = 16,32,48) */ |
| 1095 | while (*p++!='\n') {;} |
| 1096 | b = p; |
| 1097 | } |
| 1098 | p = b + DB_tab[i%16] + (m68020 ? 2 : 0); |
| 1099 | if (p[0] == 32 || p[1] == 32) |
| 1100 | { |
| 1101 | error ("Emulator reply is too short: %s", buf); |
| 1102 | } |
| 1103 | myaddr[i-low_addr] = fromhex (p[0]) * 16 + fromhex (p[1]); |
| 1104 | } |
| 1105 | } |
| 1106 | |
| 1107 | /* Information about the current target */ |
| 1108 | |
| 1109 | static void |
| 1110 | es1800_files_info (tops) |
| 1111 | struct target_ops *tops; /* Unused */ |
| 1112 | { |
| 1113 | printf ("ES1800 Attached to %s at %d baud in %s mode\n", savename, 19200, |
| 1114 | MODE); |
| 1115 | } |
| 1116 | |
| 1117 | |
| 1118 | /* We read the contents of the target location and stash it, |
| 1119 | then overwrite it with a breakpoint instruction. |
| 1120 | |
| 1121 | addr - is the target location in the target machine. |
| 1122 | contents_cache - is a pointer to memory allocated for saving the target contents. |
| 1123 | It is guaranteed by the caller to be long enough to save sizeof |
| 1124 | BREAKPOINT bytes. |
| 1125 | |
| 1126 | FIXME: This size is target_arch dependent and should be available in |
| 1127 | the target_arch transfer vector, if we ever have one... */ |
| 1128 | |
| 1129 | static int |
| 1130 | es1800_insert_breakpoint (addr, contents_cache) |
| 1131 | CORE_ADDR addr; |
| 1132 | char *contents_cache; |
| 1133 | { |
| 1134 | int val; |
| 1135 | |
| 1136 | val = target_read_memory (addr, contents_cache, sizeof (es1800_break_insn)); |
| 1137 | |
| 1138 | if (val == 0) |
| 1139 | { |
| 1140 | val = target_write_memory (addr, es1800_break_insn, |
| 1141 | sizeof (es1800_break_insn)); |
| 1142 | } |
| 1143 | |
| 1144 | return (val); |
| 1145 | } |
| 1146 | |
| 1147 | |
| 1148 | /* Write back the stashed instruction |
| 1149 | |
| 1150 | addr - is the target location in the target machine. |
| 1151 | contents_cache - is a pointer to memory allocated for saving the target contents. |
| 1152 | It is guaranteed by the caller to be long enough to save sizeof |
| 1153 | BREAKPOINT bytes. */ |
| 1154 | |
| 1155 | static int |
| 1156 | es1800_remove_breakpoint (addr, contents_cache) |
| 1157 | CORE_ADDR addr; |
| 1158 | char *contents_cache; |
| 1159 | { |
| 1160 | |
| 1161 | return (target_write_memory (addr, contents_cache, |
| 1162 | sizeof (es1800_break_insn))); |
| 1163 | } |
| 1164 | |
| 1165 | /* create_break_insn () |
| 1166 | Primitive datastructures containing the es1800 breakpoint instruction */ |
| 1167 | |
| 1168 | static void |
| 1169 | es1800_create_break_insn (ins, vec) |
| 1170 | char *ins; |
| 1171 | int vec; |
| 1172 | { |
| 1173 | if (vec == 15) |
| 1174 | { |
| 1175 | ins[0] = 0x4e; |
| 1176 | ins[1] = 0x4f; |
| 1177 | } |
| 1178 | } |
| 1179 | |
| 1180 | |
| 1181 | /* verify_break () |
| 1182 | Seach for breakpoint routine in emulator memory. |
| 1183 | returns non-zero on failure |
| 1184 | vec - trap vector used for breakpoints */ |
| 1185 | |
| 1186 | static int |
| 1187 | verify_break (vec) |
| 1188 | int vec; |
| 1189 | { |
| 1190 | CORE_ADDR memaddress; |
| 1191 | char buf[8]; |
| 1192 | char *instr = "NqNqNqNs"; /* breakpoint routine */ |
| 1193 | int status; |
| 1194 | |
| 1195 | get_break_addr (vec, &memaddress); |
| 1196 | |
| 1197 | if (memaddress) |
| 1198 | { |
| 1199 | status = target_read_memory (memaddress, buf, 8); |
| 1200 | if (status != 0) |
| 1201 | { |
| 1202 | memory_error (status, memaddress); |
| 1203 | } |
| 1204 | return (STRCMP (instr, buf)); |
| 1205 | } |
| 1206 | return (-1); |
| 1207 | } |
| 1208 | |
| 1209 | |
| 1210 | /* get_break_addr () |
| 1211 | find address of breakpint routine |
| 1212 | vec - trap vector used for breakpoints |
| 1213 | addrp - store the address here */ |
| 1214 | |
| 1215 | static void |
| 1216 | get_break_addr (vec, addrp) |
| 1217 | int vec; |
| 1218 | CORE_ADDR *addrp; |
| 1219 | { |
| 1220 | CORE_ADDR memaddress = 0; |
| 1221 | int status; |
| 1222 | int k; |
| 1223 | char buf[PBUFSIZ]; |
| 1224 | char base_addr[4]; |
| 1225 | char *p; |
| 1226 | |
| 1227 | if (m68020) |
| 1228 | { |
| 1229 | send_with_reply ("VBR ", buf, sizeof (buf)); |
| 1230 | p = buf; |
| 1231 | for (k = 0; k < 4; k++) |
| 1232 | { |
| 1233 | if ((p[k*2 + 1] == 0) || (p[k*2 + 2] == 0)) |
| 1234 | { |
| 1235 | error ("Emulator reply is too short: %s", buf); |
| 1236 | } |
| 1237 | base_addr[k] = (fromhex (p[k*2 + 1]) * 16) + fromhex (p[k*2 + 2]); |
| 1238 | } |
| 1239 | /* base addr of exception vector table */ |
| 1240 | memaddress = *((CORE_ADDR *) base_addr); |
| 1241 | } |
| 1242 | |
| 1243 | memaddress += (vec + 32) * 4; /* address of trap vector */ |
| 1244 | status = target_read_memory (memaddress, (char *) addrp, 4); |
| 1245 | if (status != 0) |
| 1246 | { |
| 1247 | memory_error (status, memaddress); |
| 1248 | } |
| 1249 | } |
| 1250 | |
| 1251 | |
| 1252 | /* Kill an inferior process */ |
| 1253 | |
| 1254 | static void |
| 1255 | es1800_kill () |
| 1256 | { |
| 1257 | if (inferior_pid != 0) |
| 1258 | { |
| 1259 | inferior_pid = 0; |
| 1260 | es1800_mourn_inferior (); |
| 1261 | } |
| 1262 | } |
| 1263 | |
| 1264 | |
| 1265 | /* Load a file to the ES1800 emulator. |
| 1266 | Converts the file from a.out format into Extended Tekhex format |
| 1267 | before the file is loaded. |
| 1268 | Also loads the trap routine, and sets the ES1800 breakpoint on it |
| 1269 | filename - the a.out to be loaded |
| 1270 | from_tty - says whether to be verbose or not |
| 1271 | FIXME Uses emulator overlay memory for trap routine */ |
| 1272 | |
| 1273 | static void |
| 1274 | es1800_load (filename, from_tty) |
| 1275 | char *filename; |
| 1276 | int from_tty; |
| 1277 | { |
| 1278 | |
| 1279 | FILE *instream; |
| 1280 | char loadname[15]; |
| 1281 | char buf[160]; |
| 1282 | struct cleanup *old_chain; |
| 1283 | int es1800_load_format = 5; |
| 1284 | |
| 1285 | if (es1800_desc == NULL) |
| 1286 | { |
| 1287 | printf ("No emulator attached, type emulator-command first\n"); |
| 1288 | return; |
| 1289 | } |
| 1290 | |
| 1291 | filename = tilde_expand (filename); |
| 1292 | make_cleanup (free, filename); |
| 1293 | |
| 1294 | switch (es1800_load_format) |
| 1295 | { |
| 1296 | case 2: /* Extended Tekhex */ |
| 1297 | if (from_tty) |
| 1298 | { |
| 1299 | printf ("Converting \"%s\" to Extended Tekhex Format\n", filename); |
| 1300 | } |
| 1301 | sprintf (buf, "tekhex %s", filename); |
| 1302 | system (buf); |
| 1303 | sprintf (loadname, "out.hex"); |
| 1304 | break; |
| 1305 | |
| 1306 | case 5: /* Motorola S-rec */ |
| 1307 | if (from_tty) |
| 1308 | { |
| 1309 | printf ("Converting \"%s\" to Motorola S-record format\n", |
| 1310 | filename); |
| 1311 | } |
| 1312 | /* in the future the source code in copy (part of binutils-1.93) will |
| 1313 | be included in this file */ |
| 1314 | sprintf (buf, |
| 1315 | "copy -s \"a.out-sunos-big\" -d \"srec\" %s /tmp/out.hex", |
| 1316 | filename); |
| 1317 | system (buf); |
| 1318 | sprintf (loadname, "/tmp/out.hex"); |
| 1319 | break; |
| 1320 | |
| 1321 | default: |
| 1322 | error ("Downloading format not defined\n"); |
| 1323 | } |
| 1324 | |
| 1325 | breakpoint_init_inferior (); |
| 1326 | inferior_pid = 0; |
| 1327 | if (from_tty) |
| 1328 | { |
| 1329 | printf ("Downloading \"%s\" to the ES 1800\n",filename); |
| 1330 | } |
| 1331 | if ((instream = fopen (loadname, "r")) == NULL) |
| 1332 | { |
| 1333 | perror_with_name ("fopen:"); |
| 1334 | } |
| 1335 | |
| 1336 | old_chain = make_cleanup (fclose, instream); |
| 1337 | immediate_quit++; |
| 1338 | |
| 1339 | es1800_reset (0); |
| 1340 | |
| 1341 | download (instream, from_tty, es1800_load_format); |
| 1342 | |
| 1343 | /* if breakpoint routine is not present anymore we have to check |
| 1344 | whether to download a new breakpoint routine or not */ |
| 1345 | |
| 1346 | if ((verify_break (es1800_break_vec) != 0) |
| 1347 | && query ("No breakpoint routine in ES 1800 emulator!\nDownload a breakpoint routine to the emulator? ")) |
| 1348 | { |
| 1349 | char buf[128]; |
| 1350 | printf ("Using break vector 0x%x\n", es1800_break_vec); |
| 1351 | sprintf (buf, "0x%x ", es1800_break_vec); |
| 1352 | printf ("Give the start address of the breakpoint routine: "); |
| 1353 | fgets (buf + strlen (buf), sizeof (buf) - strlen (buf), stdin); |
| 1354 | es1800_init_break (buf, 0); |
| 1355 | } |
| 1356 | |
| 1357 | do_cleanups (old_chain); |
| 1358 | expect_prompt (); |
| 1359 | readchar (); /* FIXME I am getting a ^G = 7 after the prompt */ |
| 1360 | printf ("\n"); |
| 1361 | |
| 1362 | if (fclose (instream) == EOF) |
| 1363 | { |
| 1364 | ; |
| 1365 | } |
| 1366 | |
| 1367 | if (es1800_load_format != 2) |
| 1368 | { |
| 1369 | sprintf (buf, "/usr/bin/rm %s", loadname); |
| 1370 | system (buf); |
| 1371 | } |
| 1372 | |
| 1373 | symbol_file_command (filename, from_tty); /* reading symbol table */ |
| 1374 | immediate_quit--; |
| 1375 | } |
| 1376 | |
| 1377 | #if 0 |
| 1378 | |
| 1379 | #define NUMCPYBYTES 20 |
| 1380 | |
| 1381 | static void |
| 1382 | bfd_copy (from_bfd, to_bfd) |
| 1383 | bfd *from_bfd; |
| 1384 | bfd *to_bfd; |
| 1385 | { |
| 1386 | asection *p, *new; |
| 1387 | int i; |
| 1388 | char buf[NUMCPYBYTES]; |
| 1389 | |
| 1390 | for (p = from_bfd->sections; p != NULL; p = p->next) |
| 1391 | { |
| 1392 | printf (" Copying section %s. Size = %x.\n", p->name, p->_cooked_size); |
| 1393 | printf (" vma = %x, offset = %x, output_sec = %x\n", |
| 1394 | p->vma, p->output_offset, p->output_section); |
| 1395 | new = bfd_make_section (to_bfd, p->name); |
| 1396 | if (p->_cooked_size && |
| 1397 | !bfd_set_section_size (to_bfd, new, p->_cooked_size)) |
| 1398 | { |
| 1399 | error ("Wrong BFD size!\n"); |
| 1400 | } |
| 1401 | if (!bfd_set_section_flags (to_bfd, new, p->flags)) |
| 1402 | { |
| 1403 | error ("bfd_set_section_flags"); |
| 1404 | } |
| 1405 | new->vma = p->vma; |
| 1406 | |
| 1407 | for (i = 0; (i + NUMCPYBYTES) < p->_cooked_size ; i += NUMCPYBYTES) |
| 1408 | { |
| 1409 | if (!bfd_get_section_contents (from_bfd, p, (PTR) buf, (file_ptr) i, |
| 1410 | (bfd_size_type) NUMCPYBYTES)) |
| 1411 | { |
| 1412 | error ("bfd_get_section_contents\n"); |
| 1413 | } |
| 1414 | if (!bfd_set_section_contents (to_bfd, new, (PTR) buf, (file_ptr) i, |
| 1415 | (bfd_size_type) NUMCPYBYTES)) |
| 1416 | { |
| 1417 | error ("bfd_set_section_contents\n"); |
| 1418 | } |
| 1419 | } |
| 1420 | bfd_get_section_contents (from_bfd, p, (PTR) buf, (file_ptr) i, |
| 1421 | (bfd_size_type) (p->_cooked_size - i)); |
| 1422 | bfd_set_section_contents (to_bfd, new, (PTR) buf,(file_ptr) i, |
| 1423 | (bfd_size_type) (p->_cooked_size - i)); |
| 1424 | } |
| 1425 | } |
| 1426 | |
| 1427 | #endif |
| 1428 | |
| 1429 | /* Start an process on the es1800 and set inferior_pid to the new |
| 1430 | process' pid. |
| 1431 | execfile - the file to run |
| 1432 | args - arguments passed to the program |
| 1433 | env - the environment vector to pass */ |
| 1434 | |
| 1435 | static void |
| 1436 | es1800_create_inferior (execfile, args, env) |
| 1437 | char *execfile; |
| 1438 | char *args; |
| 1439 | char **env; |
| 1440 | { |
| 1441 | int entry_pt; |
| 1442 | int pid; |
| 1443 | #if 0 |
| 1444 | struct expression *expr; |
| 1445 | register struct cleanup *old_chain = 0; |
| 1446 | register value val; |
| 1447 | #endif |
| 1448 | |
| 1449 | if (args && *args) |
| 1450 | { |
| 1451 | error ("Can't pass arguments to remote ES1800 process"); |
| 1452 | } |
| 1453 | |
| 1454 | #if 0 |
| 1455 | if (query ("Use 'start' as entry point? ")) |
| 1456 | { |
| 1457 | expr = parse_c_expression ("start"); |
| 1458 | old_chain = make_cleanup (free_current_contents, &expr); |
| 1459 | val = evaluate_expression (expr); |
| 1460 | entry_pt = (val->location).address; |
| 1461 | } |
| 1462 | else |
| 1463 | { |
| 1464 | printf ("Enter the program's entry point (in hexadecimal): "); |
| 1465 | scanf ("%x", &entry_pt); |
| 1466 | } |
| 1467 | #endif |
| 1468 | |
| 1469 | if (execfile == 0 || exec_bfd == 0) |
| 1470 | { |
| 1471 | error ("No exec file specified"); |
| 1472 | } |
| 1473 | |
| 1474 | entry_pt = (int) bfd_get_start_address (exec_bfd); |
| 1475 | |
| 1476 | pid = 42; |
| 1477 | |
| 1478 | /* Now that we have a child process, make it our target. */ |
| 1479 | |
| 1480 | push_target (&es1800_child_ops); |
| 1481 | |
| 1482 | /* The "process" (board) is already stopped awaiting our commands, and |
| 1483 | the program is already downloaded. We just set its PC and go. */ |
| 1484 | |
| 1485 | inferior_pid = pid; /* Needed for wait_for_inferior below */ |
| 1486 | |
| 1487 | clear_proceed_status (); |
| 1488 | |
| 1489 | /* Tell wait_for_inferior that we've started a new process. */ |
| 1490 | |
| 1491 | init_wait_for_inferior (); |
| 1492 | |
| 1493 | /* Set up the "saved terminal modes" of the inferior |
| 1494 | based on what modes we are starting it with. */ |
| 1495 | |
| 1496 | target_terminal_init (); |
| 1497 | |
| 1498 | /* Install inferior's terminal modes. */ |
| 1499 | |
| 1500 | target_terminal_inferior (); |
| 1501 | |
| 1502 | /* remote_start (args); */ |
| 1503 | /* trap_expected = 0; */ |
| 1504 | /* insert_step_breakpoint (); FIXME, do we need this? */ |
| 1505 | |
| 1506 | /* Let 'er rip... */ |
| 1507 | proceed ((CORE_ADDR) entry_pt, TARGET_SIGNAL_DEFAULT, 0); |
| 1508 | |
| 1509 | } |
| 1510 | |
| 1511 | |
| 1512 | /* The process has died, clean up. */ |
| 1513 | |
| 1514 | static void |
| 1515 | es1800_mourn_inferior () |
| 1516 | { |
| 1517 | remove_breakpoints (); |
| 1518 | unpush_target (&es1800_child_ops); |
| 1519 | generic_mourn_inferior (); /* Do all the proper things now */ |
| 1520 | } |
| 1521 | |
| 1522 | /* ES1800-protocol specific routines */ |
| 1523 | |
| 1524 | /* Keep discarding input from the remote system, until STRING is found. |
| 1525 | Let the user break out immediately. |
| 1526 | string - the string to expect |
| 1527 | nowait - break out if string not the emulator's first respond otherwise |
| 1528 | read until string is found (== 0) */ |
| 1529 | |
| 1530 | static void |
| 1531 | expect (string, nowait) |
| 1532 | char *string; |
| 1533 | int nowait; |
| 1534 | { |
| 1535 | char c; |
| 1536 | char *p = string; |
| 1537 | |
| 1538 | immediate_quit++; |
| 1539 | while (1) |
| 1540 | { |
| 1541 | c = readchar (); |
| 1542 | if (isalpha (c)) |
| 1543 | { |
| 1544 | c = toupper (c); |
| 1545 | } |
| 1546 | if (c == toupper (*p)) |
| 1547 | { |
| 1548 | p++; |
| 1549 | if (*p == '\0') |
| 1550 | { |
| 1551 | immediate_quit--; |
| 1552 | return; |
| 1553 | } |
| 1554 | } |
| 1555 | else if (!nowait) |
| 1556 | { |
| 1557 | p = string; |
| 1558 | } |
| 1559 | else |
| 1560 | { |
| 1561 | printf ("\'%s\' expected\n" , string); |
| 1562 | printf ("char %d is %d", p - string, c); |
| 1563 | error ("\n" ); |
| 1564 | } |
| 1565 | } |
| 1566 | } |
| 1567 | |
| 1568 | /* Keep discarding input until we see the prompt. */ |
| 1569 | |
| 1570 | static void |
| 1571 | expect_prompt () |
| 1572 | { |
| 1573 | expect (">", 0); |
| 1574 | } |
| 1575 | |
| 1576 | |
| 1577 | /* Read one character */ |
| 1578 | |
| 1579 | #ifdef DEBUG_STDIN |
| 1580 | |
| 1581 | /* read from stdin */ |
| 1582 | |
| 1583 | static int |
| 1584 | readchar () |
| 1585 | { |
| 1586 | char buf[1]; |
| 1587 | |
| 1588 | buf[0] = '\0'; |
| 1589 | printf ("readchar, give one character\n"); |
| 1590 | read (0, buf, 1); |
| 1591 | |
| 1592 | #if defined (LOG_FILE) |
| 1593 | putc (buf[0] & 0x7f, log_file); |
| 1594 | #endif |
| 1595 | |
| 1596 | return (buf[0] & 0x7f); |
| 1597 | } |
| 1598 | |
| 1599 | #else /* !DEBUG_STDIN */ |
| 1600 | |
| 1601 | /* Read a character from the remote system, doing all the fancy |
| 1602 | timeout stuff. */ |
| 1603 | |
| 1604 | static int |
| 1605 | readchar () |
| 1606 | { |
| 1607 | int ch; |
| 1608 | |
| 1609 | ch = SERIAL_READCHAR (es1800_desc, timeout); |
| 1610 | |
| 1611 | /* FIXME: doing an error() here will probably cause trouble, at least if from |
| 1612 | es1800_wait. */ |
| 1613 | if (ch == SERIAL_TIMEOUT) |
| 1614 | error ("Timeout reading from remote system."); |
| 1615 | else if (ch == SERIAL_ERROR) |
| 1616 | perror_with_name ("remote read"); |
| 1617 | |
| 1618 | #if defined (LOG_FILE) |
| 1619 | putc (ch & 0x7f, log_file); |
| 1620 | fflush (log_file); |
| 1621 | #endif |
| 1622 | |
| 1623 | return (ch); |
| 1624 | } |
| 1625 | |
| 1626 | #endif /* DEBUG_STDIN */ |
| 1627 | |
| 1628 | |
| 1629 | /* Send a command to the emulator and save the reply. |
| 1630 | Report an error if we get an error reply. |
| 1631 | string - the es1800 command |
| 1632 | buf - containing the emulator reply on return |
| 1633 | len - size of buf */ |
| 1634 | |
| 1635 | static void |
| 1636 | send_with_reply (string, buf, len) |
| 1637 | char *string, *buf; |
| 1638 | int len; |
| 1639 | { |
| 1640 | send (string); |
| 1641 | SERIAL_WRITE (es1800_desc, "\r", 1); |
| 1642 | |
| 1643 | #ifndef DEBUG_STDIN |
| 1644 | expect (string, 1); |
| 1645 | expect ("\r\n", 0); |
| 1646 | #endif |
| 1647 | |
| 1648 | getmessage (buf, len); |
| 1649 | } |
| 1650 | |
| 1651 | |
| 1652 | /* Send the command in STR to the emulator adding \r. check |
| 1653 | the echo for consistency. |
| 1654 | string - the es1800 command */ |
| 1655 | |
| 1656 | static void |
| 1657 | send_command (string) |
| 1658 | char *string; |
| 1659 | { |
| 1660 | send (string); |
| 1661 | SERIAL_WRITE (es1800_desc, "\r", 1); |
| 1662 | |
| 1663 | #ifndef DEBUG_STDIN |
| 1664 | expect (string, 0); |
| 1665 | expect_prompt (); |
| 1666 | #endif |
| 1667 | |
| 1668 | } |
| 1669 | |
| 1670 | /* Send a string |
| 1671 | string - the es1800 command */ |
| 1672 | |
| 1673 | static void |
| 1674 | send (string) |
| 1675 | char *string; |
| 1676 | { |
| 1677 | if (kiodebug) |
| 1678 | { |
| 1679 | fprintf (stderr, "Sending: %s\n", string); |
| 1680 | } |
| 1681 | SERIAL_WRITE (es1800_desc, string, strlen (string)); |
| 1682 | } |
| 1683 | |
| 1684 | |
| 1685 | /* Read a message from the emulator and store it in BUF. |
| 1686 | buf - containing the emulator reply on return |
| 1687 | len - size of buf */ |
| 1688 | |
| 1689 | static void |
| 1690 | getmessage (buf, len) |
| 1691 | char *buf; |
| 1692 | int len; |
| 1693 | { |
| 1694 | char *bp; |
| 1695 | int c; |
| 1696 | int prompt_found = 0; |
| 1697 | extern kiodebug; |
| 1698 | |
| 1699 | #if defined (LOG_FILE) |
| 1700 | /* This is a convenient place to do this. The idea is to do it often |
| 1701 | enough that we never lose much data if we terminate abnormally. */ |
| 1702 | fflush (log_file); |
| 1703 | #endif |
| 1704 | |
| 1705 | bp = buf; |
| 1706 | c = readchar (); |
| 1707 | do |
| 1708 | { |
| 1709 | if (c) |
| 1710 | { |
| 1711 | if (len-- < 2) /* char and terminaling NULL */ |
| 1712 | { |
| 1713 | error ("input buffer overrun\n"); |
| 1714 | } |
| 1715 | *bp++ = c; |
| 1716 | } |
| 1717 | c = readchar (); |
| 1718 | if ((c == '>') && (*(bp - 1) == ' ')) |
| 1719 | { |
| 1720 | prompt_found = 1; |
| 1721 | } |
| 1722 | } |
| 1723 | while (!prompt_found); |
| 1724 | *bp = 0; |
| 1725 | |
| 1726 | if (kiodebug) |
| 1727 | { |
| 1728 | fprintf (stderr,"message received :%s\n", buf); |
| 1729 | } |
| 1730 | } |
| 1731 | |
| 1732 | static void |
| 1733 | download (instream, from_tty, format) |
| 1734 | FILE *instream; |
| 1735 | int from_tty; |
| 1736 | int format; |
| 1737 | { |
| 1738 | char c; |
| 1739 | char buf[160]; |
| 1740 | int i = 0; |
| 1741 | |
| 1742 | send_command ("SET #2,$1A"); /* reset char = ^Z */ |
| 1743 | send_command ("SET #3,$11,$13"); /* XON XOFF */ |
| 1744 | if (format == 2) |
| 1745 | { |
| 1746 | send_command ("SET #26,#2"); |
| 1747 | } |
| 1748 | else |
| 1749 | { |
| 1750 | send_command ("SET #26,#5"); /* Format=Extended Tekhex */ |
| 1751 | } |
| 1752 | send_command ("DFB = $10"); |
| 1753 | send_command ("PUR"); |
| 1754 | send_command ("CES"); |
| 1755 | send ("DNL\r"); |
| 1756 | expect ("DNL", 1); |
| 1757 | if (from_tty) |
| 1758 | { |
| 1759 | printf (" 0 records loaded...\r"); |
| 1760 | } |
| 1761 | while (fgets (buf, 160, instream)) |
| 1762 | { |
| 1763 | send (buf); |
| 1764 | if (from_tty) |
| 1765 | { |
| 1766 | printf ("%5d\b\b\b\b\b",++i); |
| 1767 | fflush (stdout); |
| 1768 | } |
| 1769 | if ((c = readchar ()) != 006) |
| 1770 | { |
| 1771 | error ("expected ACK"); |
| 1772 | } |
| 1773 | } |
| 1774 | if (from_tty) |
| 1775 | { |
| 1776 | printf ("- All"); |
| 1777 | } |
| 1778 | } |
| 1779 | |
| 1780 | /* Additional commands */ |
| 1781 | |
| 1782 | #if defined (TIOCGETP) && defined (FNDELAY) && defined (EWOULDBLOCK) |
| 1783 | #define PROVIDE_TRANSPARENT |
| 1784 | #endif |
| 1785 | |
| 1786 | #ifdef PROVIDE_TRANSPARENT |
| 1787 | /* Talk directly to the emulator |
| 1788 | FIXME, uses busy wait, and is SUNOS (or at least BSD) specific */ |
| 1789 | |
| 1790 | /*ARGSUSED*/ |
| 1791 | static void |
| 1792 | es1800_transparent (args, from_tty) |
| 1793 | char *args; |
| 1794 | int from_tty; |
| 1795 | { |
| 1796 | int console; |
| 1797 | struct sgttyb modebl; |
| 1798 | int fcflag; |
| 1799 | int cc; |
| 1800 | struct sgttyb console_mode_save; |
| 1801 | int console_fc_save; |
| 1802 | int es1800_fc_save; |
| 1803 | int inputcnt = 80; |
| 1804 | char inputbuf[80]; |
| 1805 | int consolecnt = 0; |
| 1806 | char consolebuf[80]; |
| 1807 | int es1800_cnt = 0; |
| 1808 | char es1800_buf[80]; |
| 1809 | int i; |
| 1810 | |
| 1811 | dont_repeat (); |
| 1812 | if (es1800_desc == NULL) |
| 1813 | { |
| 1814 | printf ("No emulator attached, type emulator-command first\n"); |
| 1815 | return; |
| 1816 | } |
| 1817 | |
| 1818 | printf ("\n"); |
| 1819 | printf ("You are now communicating directly with the ES 1800 emulator.\n"); |
| 1820 | printf ("To leave this mode (transparent mode), press ^E.\n"); |
| 1821 | printf ("\n"); |
| 1822 | printf (" >"); |
| 1823 | fflush (stdout); |
| 1824 | |
| 1825 | if ((console = open ("/dev/tty", O_RDWR)) == -1) |
| 1826 | { |
| 1827 | perror_with_name ("/dev/tty:"); |
| 1828 | } |
| 1829 | |
| 1830 | if ((fcflag = fcntl (console, F_GETFL, 0)) == -1) |
| 1831 | { |
| 1832 | perror_with_name ("fcntl console"); |
| 1833 | } |
| 1834 | |
| 1835 | console_fc_save = fcflag; |
| 1836 | fcflag = fcflag | FNDELAY; |
| 1837 | |
| 1838 | if (fcntl (console, F_SETFL, fcflag) == -1) |
| 1839 | { |
| 1840 | perror_with_name ("fcntl console"); |
| 1841 | } |
| 1842 | |
| 1843 | if (ioctl (console, TIOCGETP, &modebl)) |
| 1844 | { |
| 1845 | perror_with_name ("ioctl console"); |
| 1846 | } |
| 1847 | |
| 1848 | console_mode_save = modebl; |
| 1849 | modebl.sg_flags = RAW; |
| 1850 | |
| 1851 | if (ioctl (console, TIOCSETP, &modebl)) |
| 1852 | { |
| 1853 | perror_with_name ("ioctl console"); |
| 1854 | } |
| 1855 | |
| 1856 | if ((fcflag = fcntl (es1800_desc->fd, F_GETFL, 0)) == -1) |
| 1857 | { |
| 1858 | perror_with_name ("fcntl serial"); |
| 1859 | } |
| 1860 | |
| 1861 | es1800_fc_save = fcflag; |
| 1862 | fcflag = fcflag | FNDELAY; |
| 1863 | |
| 1864 | if (fcntl (es1800_desc->fd, F_SETFL, fcflag) == -1) |
| 1865 | { |
| 1866 | perror_with_name ("fcntl serial"); |
| 1867 | } |
| 1868 | |
| 1869 | while (1) |
| 1870 | { |
| 1871 | cc = read (console, inputbuf, inputcnt); |
| 1872 | if (cc != -1) |
| 1873 | { |
| 1874 | if ((*inputbuf & 0x7f) == 0x05) |
| 1875 | { |
| 1876 | break; |
| 1877 | } |
| 1878 | for (i = 0; i < cc; ) |
| 1879 | { |
| 1880 | es1800_buf[es1800_cnt++] = inputbuf[i++]; |
| 1881 | } |
| 1882 | if ((cc = SERIAL_WRITE (es1800_desc, es1800_buf, es1800_cnt)) == -1) |
| 1883 | { |
| 1884 | perror_with_name ("FEL! write:"); |
| 1885 | } |
| 1886 | es1800_cnt -= cc; |
| 1887 | if (es1800_cnt && cc) |
| 1888 | { |
| 1889 | for (i = 0; i < es1800_cnt; i++) |
| 1890 | { |
| 1891 | es1800_buf[i] = es1800_buf[cc+i]; |
| 1892 | } |
| 1893 | } |
| 1894 | } |
| 1895 | else if (errno != EWOULDBLOCK) |
| 1896 | { |
| 1897 | perror_with_name ("FEL! read:"); |
| 1898 | } |
| 1899 | |
| 1900 | cc = read (es1800_desc->fd,inputbuf,inputcnt); |
| 1901 | if (cc != -1) |
| 1902 | { |
| 1903 | for (i = 0; i < cc; ) |
| 1904 | { |
| 1905 | consolebuf[consolecnt++] = inputbuf[i++]; |
| 1906 | } |
| 1907 | if ((cc = write (console,consolebuf,consolecnt)) == -1) |
| 1908 | { |
| 1909 | perror_with_name ("FEL! write:"); |
| 1910 | } |
| 1911 | consolecnt -= cc; |
| 1912 | if (consolecnt && cc) |
| 1913 | { |
| 1914 | for (i = 0; i < consolecnt; i++) |
| 1915 | { |
| 1916 | consolebuf[i] = consolebuf[cc+i]; |
| 1917 | } |
| 1918 | } |
| 1919 | } |
| 1920 | else if (errno != EWOULDBLOCK) |
| 1921 | { |
| 1922 | perror_with_name ("FEL! read:"); |
| 1923 | } |
| 1924 | } |
| 1925 | |
| 1926 | console_fc_save = console_fc_save & !FNDELAY; |
| 1927 | if (fcntl (console, F_SETFL, console_fc_save) == -1) |
| 1928 | { |
| 1929 | perror_with_name ("FEL! fcntl"); |
| 1930 | } |
| 1931 | |
| 1932 | if (ioctl (console, TIOCSETP, &console_mode_save)) |
| 1933 | { |
| 1934 | perror_with_name ("FEL! ioctl"); |
| 1935 | } |
| 1936 | |
| 1937 | close (console); |
| 1938 | |
| 1939 | if (fcntl (es1800_desc->fd, F_SETFL, es1800_fc_save) == -1) |
| 1940 | { |
| 1941 | perror_with_name ("FEL! fcntl"); |
| 1942 | } |
| 1943 | |
| 1944 | printf ("\n"); |
| 1945 | |
| 1946 | } |
| 1947 | #endif /* PROVIDE_TRANSPARENT */ |
| 1948 | |
| 1949 | static void |
| 1950 | es1800_init_break (args, from_tty) |
| 1951 | char *args; |
| 1952 | int from_tty; |
| 1953 | { |
| 1954 | CORE_ADDR memaddress = 0; |
| 1955 | char buf[PBUFSIZ]; |
| 1956 | char base_addr[4]; |
| 1957 | char *space_index; |
| 1958 | char *p; |
| 1959 | int k; |
| 1960 | |
| 1961 | if (args == NULL) |
| 1962 | { |
| 1963 | error_no_arg ("a trap vector"); |
| 1964 | } |
| 1965 | |
| 1966 | if (!(space_index = strchr (args, ' '))) |
| 1967 | { |
| 1968 | error ("Two arguments needed (trap vector and address of break routine).\n"); |
| 1969 | } |
| 1970 | |
| 1971 | *space_index = '\0'; |
| 1972 | |
| 1973 | es1800_break_vec = strtol (args, (char **) NULL, 0); |
| 1974 | es1800_break_address = parse_and_eval_address (space_index + 1); |
| 1975 | |
| 1976 | es1800_create_break_insn (es1800_break_insn, es1800_break_vec); |
| 1977 | |
| 1978 | if (m68020) |
| 1979 | { |
| 1980 | send_with_reply ("VBR ", buf, sizeof (buf)); |
| 1981 | p = buf; |
| 1982 | for (k = 0; k < 4; k++) |
| 1983 | { |
| 1984 | if ((p[k*2 + 1] == 0) || (p[k*2 + 2] == 0)) |
| 1985 | { |
| 1986 | error ("Emulator reply is too short: %s", buf); |
| 1987 | } |
| 1988 | base_addr[k] = (fromhex (p[k*2 + 1]) * 16) + fromhex (p[k*2 + 2]); |
| 1989 | } |
| 1990 | /* base addr of exception vector table */ |
| 1991 | memaddress = *((CORE_ADDR *) base_addr); |
| 1992 | } |
| 1993 | |
| 1994 | memaddress += (es1800_break_vec + 32) * 4; /* address of trap vector */ |
| 1995 | |
| 1996 | sprintf (buf, "@.L%lx=$%lx", memaddress, es1800_break_address); |
| 1997 | send_command (buf); /* set the address of the break routine in the */ |
| 1998 | /* trap vector */ |
| 1999 | |
| 2000 | sprintf (buf, "@.L%lx=$4E714E71", es1800_break_address); /* NOP; NOP */ |
| 2001 | send_command (buf); |
| 2002 | sprintf (buf, "@.L%lx=$4E714E73", es1800_break_address + 4); /* NOP; RTE */ |
| 2003 | send_command (buf); |
| 2004 | |
| 2005 | sprintf (buf, "AC2=$%lx", es1800_break_address + 4); |
| 2006 | /* breakpoint at es1800-break_address */ |
| 2007 | send_command (buf); |
| 2008 | send_command ("WHEN AC2 THEN BRK"); /* ie in exception routine */ |
| 2009 | |
| 2010 | if (from_tty) |
| 2011 | { |
| 2012 | printf ("Breakpoint (trap $%x) routine at address: %lx\n", |
| 2013 | es1800_break_vec, es1800_break_address); |
| 2014 | } |
| 2015 | } |
| 2016 | |
| 2017 | static void |
| 2018 | es1800_child_open (arg, from_tty) |
| 2019 | char *arg; |
| 2020 | int from_tty; |
| 2021 | { |
| 2022 | error ("Use the \"run\" command to start a child process."); |
| 2023 | } |
| 2024 | |
| 2025 | static void |
| 2026 | es1800_child_detach (args, from_tty) |
| 2027 | char *args; |
| 2028 | int from_tty; |
| 2029 | { |
| 2030 | if (args) |
| 2031 | { |
| 2032 | error ("Argument given to \"detach\" when remotely debugging."); |
| 2033 | } |
| 2034 | |
| 2035 | pop_target (); |
| 2036 | if (from_tty) |
| 2037 | { |
| 2038 | printf ("Ending debugging the process %d.\n", inferior_pid); |
| 2039 | } |
| 2040 | } |
| 2041 | |
| 2042 | |
| 2043 | /* Define the target subroutine names */ |
| 2044 | |
| 2045 | static struct target_ops es1800_ops = |
| 2046 | { |
| 2047 | "es1800", /* to_shortname */ |
| 2048 | /* to_longname */ |
| 2049 | "Remote serial target in ES1800-emulator protocol", |
| 2050 | /* to_doc */ |
| 2051 | "Remote debugging on the es1800 emulator via a serial line.\n\ |
| 2052 | Specify the serial device it is connected to (e.g. /dev/ttya).", |
| 2053 | es1800_open, /* to_open */ |
| 2054 | es1800_close, /* to_close */ |
| 2055 | es1800_attach, /* to_attach */ |
| 2056 | es1800_detach, /* to_detach */ |
| 2057 | es1800_resume, /* to_resume */ |
| 2058 | NULL, /* to_wait */ |
| 2059 | NULL, /* to_fetch_registers */ |
| 2060 | NULL, /* to_store_registers */ |
| 2061 | es1800_prepare_to_store, /* to_prepare_to_store */ |
| 2062 | es1800_xfer_inferior_memory, /* to_xfer_memory */ |
| 2063 | es1800_files_info, /* to_files_info */ |
| 2064 | es1800_insert_breakpoint, /* to_insert_breakpoint */ |
| 2065 | es1800_remove_breakpoint, /* to_remove_breakpoint */ |
| 2066 | NULL, /* to_terminal_init */ |
| 2067 | NULL, /* to_terminal_inferior */ |
| 2068 | NULL, /* to_terminal_ours_for_output */ |
| 2069 | NULL, /* to_terminal_ours */ |
| 2070 | NULL, /* to_terminal_info */ |
| 2071 | NULL, /* to_kill */ |
| 2072 | es1800_load, /* to_load */ |
| 2073 | NULL, /* to_lookup_symbol */ |
| 2074 | es1800_create_inferior, /* to_create_inferior */ |
| 2075 | NULL, /* to_mourn_inferior */ |
| 2076 | 0, /* to_can_run */ |
| 2077 | 0, /* notice_signals */ |
| 2078 | core_stratum, /* to_stratum */ |
| 2079 | 0, /* to_next */ |
| 2080 | 0, /* to_has_all_memory */ |
| 2081 | 1, /* to_has_memory */ |
| 2082 | 0, /* to_has_stack */ |
| 2083 | 0, /* to_has_registers */ |
| 2084 | 0, /* to_has_execution */ |
| 2085 | NULL, /* to_sections */ |
| 2086 | NULL, /* to_sections_end */ |
| 2087 | OPS_MAGIC /* to_magic (always last) */ |
| 2088 | }; |
| 2089 | |
| 2090 | /* Define the target subroutine names */ |
| 2091 | |
| 2092 | static struct target_ops es1800_child_ops = |
| 2093 | { |
| 2094 | "es1800_process", /* to_shortname */ |
| 2095 | /* to_longname */ |
| 2096 | "Remote serial target in ES1800-emulator protocol", |
| 2097 | /* to_doc */ |
| 2098 | "Remote debugging on the es1800 emulator via a serial line.\n\ |
| 2099 | Specify the serial device it is connected to (e.g. /dev/ttya).", |
| 2100 | es1800_child_open, /* to_open */ |
| 2101 | NULL, /* to_close */ |
| 2102 | es1800_attach, /* to_attach */ |
| 2103 | es1800_child_detach, /* to_detach */ |
| 2104 | es1800_resume, /* to_resume */ |
| 2105 | es1800_wait, /* to_wait */ |
| 2106 | es1800_fetch_register, /* to_fetch_registers */ |
| 2107 | es1800_store_register, /* to_store_registers */ |
| 2108 | es1800_prepare_to_store, /* to_prepare_to_store */ |
| 2109 | es1800_xfer_inferior_memory, /* to_xfer_memory */ |
| 2110 | es1800_files_info, /* to_files_info */ |
| 2111 | es1800_insert_breakpoint, /* to_insert_breakpoint */ |
| 2112 | es1800_remove_breakpoint, /* to_remove_breakpoint */ |
| 2113 | NULL, /* to_terminal_init */ |
| 2114 | NULL, /* to_terminal_inferior */ |
| 2115 | NULL, /* to_terminal_ours_for_output */ |
| 2116 | NULL, /* to_terminal_ours */ |
| 2117 | NULL, /* to_terminal_info */ |
| 2118 | es1800_kill, /* to_kill */ |
| 2119 | es1800_load, /* to_load */ |
| 2120 | NULL, /* to_lookup_symbol */ |
| 2121 | es1800_create_inferior, /* to_create_inferior */ |
| 2122 | es1800_mourn_inferior, /* to_mourn_inferior */ |
| 2123 | 0, /* to_can_run */ |
| 2124 | 0, /* notice_signals */ |
| 2125 | process_stratum, /* to_stratum */ |
| 2126 | 0, /* to_next */ |
| 2127 | 1, /* to_has_all_memory */ |
| 2128 | 1, /* to_has_memory */ |
| 2129 | 1, /* to_has_stack */ |
| 2130 | 1, /* to_has_registers */ |
| 2131 | 1, /* to_has_execution */ |
| 2132 | NULL, /* to_sections */ |
| 2133 | NULL, /* to_sections_end */ |
| 2134 | OPS_MAGIC /* to_magic (always last) */ |
| 2135 | }; |
| 2136 | |
| 2137 | void |
| 2138 | _initialize_es1800 () |
| 2139 | { |
| 2140 | add_target (&es1800_ops); |
| 2141 | add_target (&es1800_child_ops); |
| 2142 | #ifdef PROVIDE_TRANSPARENT |
| 2143 | add_com ("transparent", class_support, es1800_transparent, |
| 2144 | "Start transparent communication with the ES 1800 emulator."); |
| 2145 | #endif /* PROVIDE_TRANSPARENT */ |
| 2146 | add_com ("init_break", class_support, es1800_init_break, |
| 2147 | "Download break routine and initialize break facility on ES 1800"); |
| 2148 | } |