| 1 | /* Memory-access and commands for remote es1800 processes, for GDB. |
| 2 | Copyright (C) 1988, 1992 Free Software Foundation, Inc. |
| 3 | |
| 4 | This file is added to GDB to make it possible to do debugging via an |
| 5 | ES-1800 emulator. The code was originally written by Johan Holmberg |
| 6 | TT/SJ Ericsson Telecom AB and later modified by Johan Henriksson |
| 7 | TT/SJ. It was modified for gdb 4.0 by TX/DK Jan Nordenand by TX/DKG |
| 8 | Harald Johansen. |
| 9 | |
| 10 | This file is part of GDB. |
| 11 | |
| 12 | GDB is free software; you can redistribute it and/or modify |
| 13 | it under the terms of the GNU General Public License as published by |
| 14 | the Free Software Foundation; either version 1, or (at your option) |
| 15 | any later version. |
| 16 | |
| 17 | GDB is distributed in the hope that it will be useful, |
| 18 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 19 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 20 | GNU General Public License for more details. |
| 21 | |
| 22 | You should have received a copy of the GNU General Public License |
| 23 | along with this program; if not, write to the Free Software |
| 24 | Foundation, Inc., 59 Temple Place - Suite 330, |
| 25 | Boston, MA 02111-1307, USA. */ |
| 26 | |
| 27 | |
| 28 | /* Emulator communication protocol. |
| 29 | All values are encoded in ascii hex digits. |
| 30 | |
| 31 | Request |
| 32 | Command |
| 33 | Reply |
| 34 | read registers: |
| 35 | DR<cr> |
| 36 | - 0 - - 1 - - 2 - - 3 - - 4 - - 5 - -- 6 - - 7 - |
| 37 | D = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX |
| 38 | A = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX |
| 39 | PC = XXXXXX SSP = XXXXXX USP = XXXXXX SR = XXXXXXXX |
| 40 | > |
| 41 | Each byte of register data is described by two hex digits. |
| 42 | |
| 43 | write regs |
| 44 | D0=XXXXXXXX<cr> |
| 45 | >D1=XXXXXXXX<cr> |
| 46 | >D2=XXXXXXXX<cr> |
| 47 | >D3=XXXXXXXX<cr> |
| 48 | >D4=XXXXXXXX<cr> |
| 49 | >D5=XXXXXXXX<cr> |
| 50 | >D6=XXXXXXXX<cr> |
| 51 | >D7=XXXXXXXX<cr> |
| 52 | >A0=XXXXXXXX<cr> |
| 53 | >A1=XXXXXXXX<cr> |
| 54 | >A2=XXXXXXXX<cr> |
| 55 | >A3=XXXXXXXX<cr> |
| 56 | >A4=XXXXXXXX<cr> |
| 57 | >A5=XXXXXXXX<cr> |
| 58 | >A6=XXXXXXXX<cr> |
| 59 | >A7=XXXXXXXX<cr> |
| 60 | >SR=XXXXXXXX<cr> |
| 61 | >PC=XXXXXX<cr> |
| 62 | > |
| 63 | Each byte of register data is described by two hex digits. |
| 64 | |
| 65 | read mem |
| 66 | @.BAA..AA |
| 67 | $FFFFFFXX |
| 68 | > |
| 69 | AA..AA is address, XXXXXXX is the contents |
| 70 | |
| 71 | write mem |
| 72 | @.BAA..AA=$XXXXXXXX |
| 73 | > |
| 74 | AA..AA is address, XXXXXXXX is data |
| 75 | |
| 76 | cont |
| 77 | PC=$AA..AA |
| 78 | >RBK |
| 79 | R> |
| 80 | AA..AA is address to resume. If AA..AA is omitted, resume at same address. |
| 81 | |
| 82 | step |
| 83 | PC=$AA..AA |
| 84 | >STP |
| 85 | R> |
| 86 | AA..AA is address to resume. If AA..AA is omitted, resume at same address. |
| 87 | |
| 88 | kill req |
| 89 | STP |
| 90 | > |
| 91 | */ |
| 92 | |
| 93 | |
| 94 | #include <stdio.h> |
| 95 | #include <signal.h> |
| 96 | #include <sys/ioctl.h> |
| 97 | #include <sys/file.h> |
| 98 | #include <errno.h> |
| 99 | #include <ctype.h> |
| 100 | #include <setjmp.h> |
| 101 | #include <fcntl.h> |
| 102 | #include "defs.h" |
| 103 | #include "gdb_string.h" |
| 104 | #include "frame.h" |
| 105 | #include "inferior.h" |
| 106 | #include "target.h" |
| 107 | #include "gdb_wait.h" |
| 108 | #include "command.h" |
| 109 | #include "remote-utils.h" |
| 110 | #include "gdbcore.h" |
| 111 | #include "serial.h" |
| 112 | |
| 113 | /* Prototypes for local functions */ |
| 114 | |
| 115 | static void es1800_child_detach (char *, int); |
| 116 | |
| 117 | static void es1800_child_open (char *, int); |
| 118 | |
| 119 | static void es1800_transparent (char *, int); |
| 120 | |
| 121 | static void es1800_create_inferior (char *, char *, char **); |
| 122 | |
| 123 | static void es1800_load (char *, int); |
| 124 | |
| 125 | static void es1800_kill (void); |
| 126 | |
| 127 | static int verify_break (int); |
| 128 | |
| 129 | static int es1800_remove_breakpoint (CORE_ADDR, char *); |
| 130 | |
| 131 | static int es1800_insert_breakpoint (CORE_ADDR, char *); |
| 132 | |
| 133 | static void es1800_files_info (struct target_ops *); |
| 134 | |
| 135 | static int |
| 136 | es1800_xfer_inferior_memory (CORE_ADDR, char *, int, int, |
| 137 | struct target_ops *); |
| 138 | |
| 139 | static void es1800_prepare_to_store (void); |
| 140 | |
| 141 | static int es1800_wait (int, struct target_waitstatus *); |
| 142 | |
| 143 | static void es1800_resume (int, int, enum target_signal); |
| 144 | |
| 145 | static void es1800_detach (char *, int); |
| 146 | |
| 147 | static void es1800_attach (char *, int); |
| 148 | |
| 149 | static int damn_b (char *); |
| 150 | |
| 151 | static void es1800_open (char *, int); |
| 152 | |
| 153 | static void es1800_timer (void); |
| 154 | |
| 155 | static void es1800_reset (char *); |
| 156 | |
| 157 | static void es1800_request_quit (void); |
| 158 | |
| 159 | static int readchar (void); |
| 160 | |
| 161 | static void expect (char *, int); |
| 162 | |
| 163 | static void expect_prompt (void); |
| 164 | |
| 165 | static void download (FILE *, int, int); |
| 166 | |
| 167 | #if 0 |
| 168 | static void bfd_copy (bfd *, bfd *); |
| 169 | #endif |
| 170 | |
| 171 | static void get_break_addr (int, CORE_ADDR *); |
| 172 | |
| 173 | static int fromhex (int); |
| 174 | |
| 175 | static int tohex (int); |
| 176 | |
| 177 | static void es1800_close (int); |
| 178 | |
| 179 | static void es1800_fetch_registers (void); |
| 180 | |
| 181 | static void es1800_fetch_register (int); |
| 182 | |
| 183 | static void es1800_store_register (int); |
| 184 | |
| 185 | static void es1800_read_bytes (CORE_ADDR, char *, int); |
| 186 | |
| 187 | static void es1800_write_bytes (CORE_ADDR, char *, int); |
| 188 | |
| 189 | static void send_with_reply (char *, char *, int); |
| 190 | |
| 191 | static void send_command (char *); |
| 192 | |
| 193 | static void send (char *); |
| 194 | |
| 195 | static void getmessage (char *, int); |
| 196 | |
| 197 | static void es1800_mourn_inferior (void); |
| 198 | |
| 199 | static void es1800_create_break_insn (char *, int); |
| 200 | |
| 201 | static void es1800_init_break (char *, int); |
| 202 | |
| 203 | /* Local variables */ |
| 204 | |
| 205 | /* FIXME: Convert this to use "set remotedebug" instead. */ |
| 206 | #define LOG_FILE "es1800.log" |
| 207 | #if defined (LOG_FILE) |
| 208 | static FILE *log_file; |
| 209 | #endif |
| 210 | |
| 211 | extern struct target_ops es1800_ops; /* Forward decl */ |
| 212 | extern struct target_ops es1800_child_ops; /* Forward decl */ |
| 213 | |
| 214 | static int kiodebug; |
| 215 | static int timeout = 100; |
| 216 | static char *savename; /* Name of i/o device used */ |
| 217 | static serial_ttystate es1800_saved_ttystate; |
| 218 | static int es1800_fc_save; /* Save fcntl state */ |
| 219 | |
| 220 | /* indicates that the emulator uses 32-bit data-adress (68020-mode) |
| 221 | instead of 24-bit (68000 -mode) */ |
| 222 | |
| 223 | static int m68020; |
| 224 | |
| 225 | #define MODE (m68020 ? "M68020" : "M68000" ) |
| 226 | #define ES1800_BREAK_VEC (0xf) |
| 227 | |
| 228 | /* Descriptor for I/O to remote machine. Initialize it to NULL so that |
| 229 | es1800_open knows that we don't have a file open when the program |
| 230 | starts. */ |
| 231 | |
| 232 | static serial_t es1800_desc = NULL; |
| 233 | |
| 234 | #define PBUFSIZ 1000 |
| 235 | #define HDRLEN sizeof("@.BAAAAAAAA=$VV\r") |
| 236 | |
| 237 | /* Maximum number of bytes to read/write at once. The value here |
| 238 | is chosen to fill up a packet. */ |
| 239 | |
| 240 | #define MAXBUFBYTES ((PBUFSIZ-150)*16/75 ) |
| 241 | |
| 242 | static int es1800_break_vec = 0; |
| 243 | static char es1800_break_insn[2]; |
| 244 | static long es1800_break_address; |
| 245 | static void (*old_sigint) (); /* Old signal-handler for sigint */ |
| 246 | static jmp_buf interrupt; |
| 247 | |
| 248 | /* Local signalhandler to allow breaking tranfers or program run. |
| 249 | Rely on global variables: old_sigint(), interrupt */ |
| 250 | |
| 251 | static void |
| 252 | es1800_request_quit () |
| 253 | { |
| 254 | /* restore original signalhandler */ |
| 255 | signal (SIGINT, old_sigint); |
| 256 | longjmp (interrupt, 1); |
| 257 | } |
| 258 | |
| 259 | |
| 260 | /* Reset emulator. |
| 261 | Sending reset character(octal 32) to emulator. |
| 262 | quit - return to '(esgdb)' prompt or continue */ |
| 263 | |
| 264 | static void |
| 265 | es1800_reset (quit) |
| 266 | char *quit; |
| 267 | { |
| 268 | char buf[80]; |
| 269 | |
| 270 | if (quit) |
| 271 | { |
| 272 | printf ("\nResetting emulator... "); |
| 273 | } |
| 274 | strcpy (buf, "\032"); |
| 275 | send (buf); |
| 276 | expect_prompt (); |
| 277 | if (quit) |
| 278 | { |
| 279 | error ("done\n"); |
| 280 | } |
| 281 | } |
| 282 | |
| 283 | |
| 284 | /* Open a connection to a remote debugger and push the new target |
| 285 | onto the stack. Check if the emulator is responding and find out |
| 286 | what kind of processor the emulator is connected to. |
| 287 | Initiate the breakpoint handling in the emulator. |
| 288 | |
| 289 | name - the filename used for communication (ex. '/dev/tta') |
| 290 | from_tty - says whether to be verbose or not */ |
| 291 | |
| 292 | static void |
| 293 | es1800_open (name, from_tty) |
| 294 | char *name; |
| 295 | int from_tty; |
| 296 | { |
| 297 | char buf[PBUFSIZ]; |
| 298 | char *p; |
| 299 | int i, fcflag; |
| 300 | |
| 301 | m68020 = 0; |
| 302 | |
| 303 | if (!name) /* no device name given in target command */ |
| 304 | { |
| 305 | error_no_arg ("serial port device name"); |
| 306 | } |
| 307 | |
| 308 | target_preopen (from_tty); |
| 309 | es1800_close (0); |
| 310 | |
| 311 | /* open the device and configure it for communication */ |
| 312 | |
| 313 | #ifndef DEBUG_STDIN |
| 314 | |
| 315 | es1800_desc = SERIAL_OPEN (name); |
| 316 | if (es1800_desc == NULL) |
| 317 | { |
| 318 | perror_with_name (name); |
| 319 | } |
| 320 | savename = savestring (name, strlen (name)); |
| 321 | |
| 322 | es1800_saved_ttystate = SERIAL_GET_TTY_STATE (es1800_desc); |
| 323 | |
| 324 | if ((fcflag = fcntl (DEPRECATED_SERIAL_FD (es1800_desc), F_GETFL, 0)) == -1) |
| 325 | { |
| 326 | perror_with_name ("fcntl serial"); |
| 327 | } |
| 328 | es1800_fc_save = fcflag; |
| 329 | |
| 330 | fcflag = (fcflag & (FREAD | FWRITE)); /* mask out any funny stuff */ |
| 331 | if (fcntl (DEPRECATED_SERIAL_FD (es1800_desc), F_SETFL, fcflag) == -1) |
| 332 | { |
| 333 | perror_with_name ("fcntl serial"); |
| 334 | } |
| 335 | |
| 336 | if (baud_rate != -1) |
| 337 | { |
| 338 | if (SERIAL_SETBAUDRATE (es1800_desc, baud_rate)) |
| 339 | { |
| 340 | SERIAL_CLOSE (es1800_desc); |
| 341 | perror_with_name (name); |
| 342 | } |
| 343 | } |
| 344 | |
| 345 | SERIAL_RAW (es1800_desc); |
| 346 | |
| 347 | /* If there is something sitting in the buffer we might take it as a |
| 348 | response to a command, which would be bad. */ |
| 349 | SERIAL_FLUSH_INPUT (es1800_desc); |
| 350 | |
| 351 | #endif /* DEBUG_STDIN */ |
| 352 | |
| 353 | push_target (&es1800_ops); /* Switch to using remote target now */ |
| 354 | if (from_tty) |
| 355 | { |
| 356 | printf ("Remote ES1800 debugging using %s\n", name); |
| 357 | } |
| 358 | |
| 359 | #if defined (LOG_FILE) |
| 360 | |
| 361 | log_file = fopen (LOG_FILE, "w"); |
| 362 | if (log_file == NULL) |
| 363 | { |
| 364 | perror_with_name (LOG_FILE); |
| 365 | } |
| 366 | |
| 367 | #endif /* LOG_FILE */ |
| 368 | |
| 369 | /* Hello? Are you there?, also check mode */ |
| 370 | |
| 371 | /* send_with_reply( "DB 0 TO 1", buf, sizeof(buf)); */ |
| 372 | /* for (p = buf, i = 0; *p++ =='0';) *//* count the number of zeros */ |
| 373 | /* i++; */ |
| 374 | |
| 375 | send ("\032"); |
| 376 | getmessage (buf, sizeof (buf)); /* send reset character */ |
| 377 | |
| 378 | if (from_tty) |
| 379 | { |
| 380 | printf ("Checking mode.... "); |
| 381 | } |
| 382 | /* m68020 = (i==8); *//* if eight zeros then we are in m68020 mode */ |
| 383 | |
| 384 | /* What kind of processor am i talking to ? */ |
| 385 | p = buf; |
| 386 | while (*p++ != '\n') |
| 387 | {; |
| 388 | } |
| 389 | while (*p++ != '\n') |
| 390 | {; |
| 391 | } |
| 392 | while (*p++ != '\n') |
| 393 | {; |
| 394 | } |
| 395 | for (i = 0; i < 20; i++, p++) |
| 396 | {; |
| 397 | } |
| 398 | m68020 = !strncmp (p, "68020", 5); |
| 399 | if (from_tty) |
| 400 | { |
| 401 | printf ("You are in %s(%c%c%c%c%c)-mode\n", MODE, p[0], p[1], p[2], |
| 402 | p[3], p[4]); |
| 403 | } |
| 404 | |
| 405 | /* if no init_break statement is present in .gdb file we have to check |
| 406 | whether to download a breakpoint routine or not */ |
| 407 | |
| 408 | #if 0 |
| 409 | if ((es1800_break_vec == 0) || (verify_break (es1800_break_vec) != 0) |
| 410 | && query ("No breakpoint routine in ES 1800 emulator!\nDownload a breakpoint routine to the emulator? ")) |
| 411 | { |
| 412 | CORE_ADDR memaddress; |
| 413 | printf ("Give the start address of the breakpoint routine: "); |
| 414 | scanf ("%li", &memaddress); |
| 415 | es1800_init_break ((es1800_break_vec ? es1800_break_vec : |
| 416 | ES1800_BREAK_VEC), memaddress); |
| 417 | } |
| 418 | #endif |
| 419 | |
| 420 | } |
| 421 | |
| 422 | /* Close out all files and local state before this target loses control. |
| 423 | quitting - are we quitting gdb now? */ |
| 424 | |
| 425 | static void |
| 426 | es1800_close (quitting) |
| 427 | int quitting; |
| 428 | { |
| 429 | if (es1800_desc != NULL) |
| 430 | { |
| 431 | printf ("\nClosing connection to emulator...\n"); |
| 432 | if (SERIAL_SET_TTY_STATE (es1800_desc, es1800_saved_ttystate) < 0) |
| 433 | print_sys_errmsg ("warning: unable to restore tty state", errno); |
| 434 | fcntl (DEPRECATED_SERIAL_FD (es1800_desc), F_SETFL, es1800_fc_save); |
| 435 | SERIAL_CLOSE (es1800_desc); |
| 436 | es1800_desc = NULL; |
| 437 | } |
| 438 | if (savename != NULL) |
| 439 | { |
| 440 | free (savename); |
| 441 | } |
| 442 | savename = NULL; |
| 443 | |
| 444 | #if defined (LOG_FILE) |
| 445 | |
| 446 | if (log_file != NULL) |
| 447 | { |
| 448 | if (ferror (log_file)) |
| 449 | { |
| 450 | printf ("Error writing log file.\n"); |
| 451 | } |
| 452 | if (fclose (log_file) != 0) |
| 453 | { |
| 454 | printf ("Error closing log file.\n"); |
| 455 | } |
| 456 | log_file = NULL; |
| 457 | } |
| 458 | |
| 459 | #endif /* LOG_FILE */ |
| 460 | |
| 461 | } |
| 462 | |
| 463 | /* Attaches to a process on the target side |
| 464 | proc_id - the id of the process to be attached. |
| 465 | from_tty - says whether to be verbose or not */ |
| 466 | |
| 467 | static void |
| 468 | es1800_attach (args, from_tty) |
| 469 | char *args; |
| 470 | int from_tty; |
| 471 | { |
| 472 | error ("Cannot attach to pid %s, this feature is not implemented yet.", |
| 473 | args); |
| 474 | } |
| 475 | |
| 476 | |
| 477 | /* Takes a program previously attached to and detaches it. |
| 478 | We better not have left any breakpoints |
| 479 | in the program or it'll die when it hits one. |
| 480 | Close the open connection to the remote debugger. |
| 481 | Use this when you want to detach and do something else |
| 482 | with your gdb. |
| 483 | |
| 484 | args - arguments given to the 'detach' command |
| 485 | from_tty - says whether to be verbose or not */ |
| 486 | |
| 487 | static void |
| 488 | es1800_detach (args, from_tty) |
| 489 | char *args; |
| 490 | int from_tty; |
| 491 | { |
| 492 | if (args) |
| 493 | { |
| 494 | error ("Argument given to \"detach\" when remotely debugging."); |
| 495 | } |
| 496 | pop_target (); |
| 497 | if (from_tty) |
| 498 | { |
| 499 | printf ("Ending es1800 remote debugging.\n"); |
| 500 | } |
| 501 | } |
| 502 | |
| 503 | |
| 504 | /* Tell the remote machine to resume. |
| 505 | step - single-step or run free |
| 506 | siggnal - the signal value to be given to the target (0 = no signal) */ |
| 507 | |
| 508 | static void |
| 509 | es1800_resume (pid, step, siggnal) |
| 510 | int pid; |
| 511 | int step; |
| 512 | enum target_signal siggnal; |
| 513 | { |
| 514 | char buf[PBUFSIZ]; |
| 515 | |
| 516 | if (siggnal) |
| 517 | { |
| 518 | error ("Can't send signals to a remote system."); |
| 519 | } |
| 520 | if (step) |
| 521 | { |
| 522 | strcpy (buf, "STP\r"); |
| 523 | send (buf); |
| 524 | } |
| 525 | else |
| 526 | { |
| 527 | send_command ("RBK"); |
| 528 | } |
| 529 | } |
| 530 | |
| 531 | /* Wait until the remote machine stops, then return, |
| 532 | storing status in STATUS just as `wait' would. |
| 533 | status - */ |
| 534 | |
| 535 | static int |
| 536 | es1800_wait (pid, status) |
| 537 | int pid; |
| 538 | struct target_waitstatus *status; |
| 539 | { |
| 540 | unsigned char buf[PBUFSIZ]; |
| 541 | int old_timeout = timeout; |
| 542 | |
| 543 | status->kind = TARGET_WAITKIND_EXITED; |
| 544 | status->value.integer = 0; |
| 545 | |
| 546 | timeout = 0; /* Don't time out -- user program is running. */ |
| 547 | if (!setjmp (interrupt)) |
| 548 | { |
| 549 | old_sigint = signal (SIGINT, es1800_request_quit); |
| 550 | while (1) |
| 551 | { |
| 552 | getmessage (buf, sizeof (buf)); |
| 553 | if (strncmp (buf, "\r\n* BREAK *", 11) == 0) |
| 554 | { |
| 555 | status->kind = TARGET_WAITKIND_STOPPED; |
| 556 | status->value.sig = TARGET_SIGNAL_TRAP; |
| 557 | send_command ("STP"); /* Restore stack and PC and such */ |
| 558 | if (m68020) |
| 559 | { |
| 560 | send_command ("STP"); |
| 561 | } |
| 562 | break; |
| 563 | } |
| 564 | if (strncmp (buf, "STP\r\n ", 6) == 0) |
| 565 | { |
| 566 | status->kind = TARGET_WAITKIND_STOPPED; |
| 567 | status->value.sig = TARGET_SIGNAL_TRAP; |
| 568 | break; |
| 569 | } |
| 570 | if (buf[strlen (buf) - 2] == 'R') |
| 571 | { |
| 572 | printf ("Unexpected emulator reply: \n%s\n", buf); |
| 573 | } |
| 574 | else |
| 575 | { |
| 576 | printf ("Unexpected stop: \n%s\n", buf); |
| 577 | status->kind = TARGET_WAITKIND_STOPPED; |
| 578 | status->value.sig = TARGET_SIGNAL_QUIT; |
| 579 | break; |
| 580 | } |
| 581 | } |
| 582 | } |
| 583 | else |
| 584 | { |
| 585 | fflush (stdin); |
| 586 | printf ("\nStopping emulator..."); |
| 587 | if (!setjmp (interrupt)) |
| 588 | { |
| 589 | old_sigint = signal (SIGINT, es1800_request_quit); |
| 590 | send_command ("STP"); |
| 591 | printf (" emulator stopped\n"); |
| 592 | status->kind = TARGET_WAITKIND_STOPPED; |
| 593 | status->value.sig = TARGET_SIGNAL_INT; |
| 594 | } |
| 595 | else |
| 596 | { |
| 597 | fflush (stdin); |
| 598 | es1800_reset ((char *) 1); |
| 599 | } |
| 600 | } |
| 601 | signal (SIGINT, old_sigint); |
| 602 | timeout = old_timeout; |
| 603 | return (0); |
| 604 | } |
| 605 | |
| 606 | |
| 607 | /* Fetch register values from remote machine. |
| 608 | regno - the register to be fetched (fetch all registers if -1) */ |
| 609 | |
| 610 | static void |
| 611 | es1800_fetch_register (regno) |
| 612 | int regno; |
| 613 | { |
| 614 | char buf[PBUFSIZ]; |
| 615 | int k; |
| 616 | int r; |
| 617 | char *p; |
| 618 | static char regtab[18][4] = |
| 619 | { |
| 620 | "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ", |
| 621 | "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP", |
| 622 | "SR ", "PC " |
| 623 | }; |
| 624 | |
| 625 | if ((regno < 15) || (regno == 16) || (regno == 17)) |
| 626 | { |
| 627 | r = regno * 4; |
| 628 | send_with_reply (regtab[regno], buf, sizeof (buf)); |
| 629 | p = buf; |
| 630 | for (k = 0; k < 4; k++) |
| 631 | { |
| 632 | if ((p[k * 2 + 1] == 0) || (p[k * 2 + 2] == 0)) |
| 633 | { |
| 634 | error ("Emulator reply is too short: %s", buf); |
| 635 | } |
| 636 | registers[r++] = (fromhex (p[k * 2 + 1]) * 16) + fromhex (p[k * 2 + 2]); |
| 637 | } |
| 638 | } |
| 639 | else |
| 640 | { |
| 641 | es1800_fetch_registers (); |
| 642 | } |
| 643 | } |
| 644 | |
| 645 | /* Read the remote registers into REGISTERS. |
| 646 | Always fetches all registers. */ |
| 647 | |
| 648 | static void |
| 649 | es1800_fetch_registers () |
| 650 | { |
| 651 | char buf[PBUFSIZ]; |
| 652 | char SR_buf[PBUFSIZ]; |
| 653 | int i; |
| 654 | int k; |
| 655 | int r; |
| 656 | char *p; |
| 657 | |
| 658 | send_with_reply ("DR", buf, sizeof (buf)); |
| 659 | |
| 660 | /* Reply is edited to a string that describes registers byte by byte, |
| 661 | each byte encoded as two hex characters. */ |
| 662 | |
| 663 | p = buf; |
| 664 | r = 0; |
| 665 | |
| 666 | /* parsing row one - D0-D7-registers */ |
| 667 | |
| 668 | while (*p++ != '\n') |
| 669 | {; |
| 670 | } |
| 671 | for (i = 4; i < 70; i += (i == 39 ? 3 : 1)) |
| 672 | { |
| 673 | for (k = 0; k < 4; k++) |
| 674 | { |
| 675 | if (p[i + 0] == 0 || p[i + 1] == 0) |
| 676 | { |
| 677 | error ("Emulator reply is too short: %s", buf); |
| 678 | } |
| 679 | registers[r++] = (fromhex (p[i + 0]) * 16) + fromhex (p[i + 1]); |
| 680 | i += 2; |
| 681 | } |
| 682 | } |
| 683 | p += i; |
| 684 | |
| 685 | /* parsing row two - A0-A6-registers */ |
| 686 | |
| 687 | while (*p++ != '\n') |
| 688 | {; |
| 689 | } |
| 690 | for (i = 4; i < 61; i += (i == 39 ? 3 : 1)) |
| 691 | { |
| 692 | for (k = 0; k < 4; k++) |
| 693 | { |
| 694 | if (p[i + 0] == 0 || p[i + 1] == 0) |
| 695 | { |
| 696 | error ("Emulator reply is too short: %s", buf); |
| 697 | } |
| 698 | registers[r++] = (fromhex (p[i + 0])) * 16 + fromhex (p[i + 1]); |
| 699 | i += 2; |
| 700 | } |
| 701 | } |
| 702 | p += i; |
| 703 | |
| 704 | while (*p++ != '\n') |
| 705 | {; |
| 706 | } |
| 707 | |
| 708 | /* fetch SSP-, SR- and PC-registers */ |
| 709 | |
| 710 | /* first - check STATUS-word and decide which stackpointer to use */ |
| 711 | |
| 712 | send_with_reply ("SR", SR_buf, sizeof (SR_buf)); |
| 713 | p = SR_buf; |
| 714 | p += 5; |
| 715 | |
| 716 | if (m68020) |
| 717 | { |
| 718 | if (*p == '3') /* use masterstackpointer MSP */ |
| 719 | { |
| 720 | send_with_reply ("MSP", buf, sizeof (buf)); |
| 721 | } |
| 722 | else if (*p == '2') /* use interruptstackpointer ISP */ |
| 723 | { |
| 724 | send_with_reply ("ISP", buf, sizeof (buf)); |
| 725 | } |
| 726 | else |
| 727 | /* use userstackpointer USP */ |
| 728 | { |
| 729 | send_with_reply ("USP", buf, sizeof (buf)); |
| 730 | } |
| 731 | p = buf; |
| 732 | for (k = 0; k < 4; k++) |
| 733 | { |
| 734 | if (p[k * 2 + 1] == 0 || p[k * 2 + 2] == 0) |
| 735 | { |
| 736 | error ("Emulator reply is too short: %s", buf); |
| 737 | } |
| 738 | registers[r++] = fromhex (buf[k * 2 + 1]) * 16 + fromhex (buf[k * 2 + 2]); |
| 739 | } |
| 740 | |
| 741 | p = SR_buf; |
| 742 | for (k = 0; k < 4; k++) |
| 743 | { |
| 744 | if (p[k * 2 + 1] == 0 || p[k * 2 + 2] == 0) |
| 745 | { |
| 746 | error ("Emulator reply is too short: %s", buf); |
| 747 | } |
| 748 | registers[r++] = |
| 749 | fromhex (SR_buf[k * 2 + 1]) * 16 + fromhex (SR_buf[k * 2 + 2]); |
| 750 | } |
| 751 | send_with_reply ("PC", buf, sizeof (buf)); |
| 752 | p = buf; |
| 753 | for (k = 0; k < 4; k++) |
| 754 | { |
| 755 | if (p[k * 2 + 1] == 0 || p[k * 2 + 2] == 0) |
| 756 | { |
| 757 | error ("Emulator reply is too short: %s", buf); |
| 758 | } |
| 759 | registers[r++] = fromhex (buf[k * 2 + 1]) * 16 + fromhex (buf[k * 2 + 2]); |
| 760 | } |
| 761 | } |
| 762 | else |
| 763 | /* 68000-mode */ |
| 764 | { |
| 765 | if (*p == '2') /* use supervisorstackpointer SSP */ |
| 766 | { |
| 767 | send_with_reply ("SSP", buf, sizeof (buf)); |
| 768 | } |
| 769 | else |
| 770 | /* use userstackpointer USP */ |
| 771 | { |
| 772 | send_with_reply ("USP", buf, sizeof (buf)); |
| 773 | } |
| 774 | |
| 775 | /* fetch STACKPOINTER */ |
| 776 | |
| 777 | p = buf; |
| 778 | for (k = 0; k < 4; k++) |
| 779 | { |
| 780 | if (p[k * 2 + 1] == 0 || p[k * 2 + 2] == 0) |
| 781 | { |
| 782 | error ("Emulator reply is too short: %s", buf); |
| 783 | } |
| 784 | registers[r++] = fromhex (buf[k * 2 + 1]) * 16 + fromhex (buf[k * 2 + 2]); |
| 785 | } |
| 786 | |
| 787 | /* fetch STATUS */ |
| 788 | |
| 789 | p = SR_buf; |
| 790 | for (k = 0; k < 4; k++) |
| 791 | { |
| 792 | if (p[k * 2 + 1] == 0 || p[k * 2 + 2] == 0) |
| 793 | { |
| 794 | error ("Emulator reply is too short: %s", buf); |
| 795 | } |
| 796 | registers[r++] = |
| 797 | fromhex (SR_buf[k * 2 + 1]) * 16 + fromhex (SR_buf[k * 2 + 2]); |
| 798 | } |
| 799 | |
| 800 | /* fetch PC */ |
| 801 | |
| 802 | send_with_reply ("PC", buf, sizeof (buf)); |
| 803 | p = buf; |
| 804 | for (k = 0; k < 4; k++) |
| 805 | { |
| 806 | if (p[k * 2 + 1] == 0 || p[k * 2 + 2] == 0) |
| 807 | { |
| 808 | error ("Emulator reply is too short: %s", buf); |
| 809 | } |
| 810 | registers[r++] = fromhex (buf[k * 2 + 1]) * 16 + fromhex (buf[k * 2 + 2]); |
| 811 | } |
| 812 | } |
| 813 | } |
| 814 | |
| 815 | /* Store register value, located in REGISTER, on the target processor. |
| 816 | regno - the register-number of the register to store |
| 817 | (-1 means store them all) |
| 818 | FIXME: Return errno value. */ |
| 819 | |
| 820 | static void |
| 821 | es1800_store_register (regno) |
| 822 | int regno; |
| 823 | { |
| 824 | |
| 825 | static char regtab[18][4] = |
| 826 | { |
| 827 | "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ", |
| 828 | "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP", |
| 829 | "SR ", "PC " |
| 830 | }; |
| 831 | |
| 832 | char buf[PBUFSIZ]; |
| 833 | char SR_buf[PBUFSIZ]; |
| 834 | char stack_pointer[4]; |
| 835 | char *p; |
| 836 | int i; |
| 837 | int j; |
| 838 | int k; |
| 839 | unsigned char *r; |
| 840 | |
| 841 | r = (unsigned char *) registers; |
| 842 | |
| 843 | if (regno == -1) /* write all registers */ |
| 844 | { |
| 845 | j = 0; |
| 846 | k = 18; |
| 847 | } |
| 848 | else |
| 849 | /* write one register */ |
| 850 | { |
| 851 | j = regno; |
| 852 | k = regno + 1; |
| 853 | r += regno * 4; |
| 854 | } |
| 855 | |
| 856 | if ((regno == -1) || (regno == 15)) |
| 857 | { |
| 858 | /* fetch current status */ |
| 859 | send_with_reply ("SR", SR_buf, sizeof (SR_buf)); |
| 860 | p = SR_buf; |
| 861 | p += 5; |
| 862 | if (m68020) |
| 863 | { |
| 864 | if (*p == '3') /* use masterstackpointer MSP */ |
| 865 | { |
| 866 | strcpy (stack_pointer, "MSP"); |
| 867 | } |
| 868 | else |
| 869 | { |
| 870 | if (*p == '2') /* use interruptstackpointer ISP */ |
| 871 | { |
| 872 | strcpy (stack_pointer, "ISP"); |
| 873 | } |
| 874 | else |
| 875 | { |
| 876 | strcpy (stack_pointer, "USP"); /* use userstackpointer USP */ |
| 877 | } |
| 878 | } |
| 879 | } |
| 880 | else |
| 881 | /* 68000-mode */ |
| 882 | { |
| 883 | if (*p == '2') /* use supervisorstackpointer SSP */ |
| 884 | { |
| 885 | strcpy (stack_pointer, "SSP"); |
| 886 | } |
| 887 | else |
| 888 | { |
| 889 | strcpy (stack_pointer, "USP"); /* use userstackpointer USP */ |
| 890 | } |
| 891 | } |
| 892 | strcpy (regtab[15], stack_pointer); |
| 893 | } |
| 894 | |
| 895 | for (i = j; i < k; i++) |
| 896 | { |
| 897 | buf[0] = regtab[i][0]; |
| 898 | buf[1] = regtab[i][1]; |
| 899 | buf[2] = regtab[i][2]; |
| 900 | buf[3] = '='; |
| 901 | buf[4] = '$'; |
| 902 | buf[5] = tohex ((*r >> 4) & 0x0f); |
| 903 | buf[6] = tohex (*r++ & 0x0f); |
| 904 | buf[7] = tohex ((*r >> 4) & 0x0f); |
| 905 | buf[8] = tohex (*r++ & 0x0f); |
| 906 | buf[9] = tohex ((*r >> 4) & 0x0f); |
| 907 | buf[10] = tohex (*r++ & 0x0f); |
| 908 | buf[11] = tohex ((*r >> 4) & 0x0f); |
| 909 | buf[12] = tohex (*r++ & 0x0f); |
| 910 | buf[13] = 0; |
| 911 | |
| 912 | send_with_reply (buf, buf, sizeof (buf)); /* FIXME, reply not used? */ |
| 913 | } |
| 914 | } |
| 915 | |
| 916 | |
| 917 | /* Prepare to store registers. */ |
| 918 | |
| 919 | static void |
| 920 | es1800_prepare_to_store () |
| 921 | { |
| 922 | /* Do nothing, since we can store individual regs */ |
| 923 | } |
| 924 | |
| 925 | /* Convert hex digit A to a number. */ |
| 926 | |
| 927 | static int |
| 928 | fromhex (a) |
| 929 | int a; |
| 930 | { |
| 931 | if (a >= '0' && a <= '9') |
| 932 | { |
| 933 | return a - '0'; |
| 934 | } |
| 935 | else if (a >= 'a' && a <= 'f') |
| 936 | { |
| 937 | return a - 'a' + 10; |
| 938 | } |
| 939 | else if (a >= 'A' && a <= 'F') |
| 940 | { |
| 941 | return a - 'A' + 10; |
| 942 | } |
| 943 | else |
| 944 | { |
| 945 | error ("Reply contains invalid hex digit"); |
| 946 | } |
| 947 | return (-1); |
| 948 | } |
| 949 | |
| 950 | |
| 951 | /* Convert number NIB to a hex digit. */ |
| 952 | |
| 953 | static int |
| 954 | tohex (nib) |
| 955 | int nib; |
| 956 | { |
| 957 | if (nib < 10) |
| 958 | { |
| 959 | return ('0' + nib); |
| 960 | } |
| 961 | else |
| 962 | { |
| 963 | return ('A' + nib - 10); |
| 964 | } |
| 965 | } |
| 966 | |
| 967 | /* Read or write LEN bytes from inferior memory at MEMADDR, transferring |
| 968 | to or from debugger address MYADDR. Write to inferior if WRITE is |
| 969 | nonzero. Returns length of data written or read; 0 for error. |
| 970 | |
| 971 | memaddr - the target's address |
| 972 | myaddr - gdb's address |
| 973 | len - number of bytes |
| 974 | write - write if != 0 otherwise read */ |
| 975 | |
| 976 | static int |
| 977 | es1800_xfer_inferior_memory (memaddr, myaddr, len, write, tops) |
| 978 | CORE_ADDR memaddr; |
| 979 | char *myaddr; |
| 980 | int len; |
| 981 | int write; |
| 982 | struct target_ops *tops; /* Unused */ |
| 983 | { |
| 984 | int origlen = len; |
| 985 | int xfersize; |
| 986 | |
| 987 | while (len > 0) |
| 988 | { |
| 989 | xfersize = len > MAXBUFBYTES ? MAXBUFBYTES : len; |
| 990 | if (write) |
| 991 | { |
| 992 | es1800_write_bytes (memaddr, myaddr, xfersize); |
| 993 | } |
| 994 | else |
| 995 | { |
| 996 | es1800_read_bytes (memaddr, myaddr, xfersize); |
| 997 | } |
| 998 | memaddr += xfersize; |
| 999 | myaddr += xfersize; |
| 1000 | len -= xfersize; |
| 1001 | } |
| 1002 | return (origlen); /* no error possible */ |
| 1003 | } |
| 1004 | |
| 1005 | |
| 1006 | /* Write memory data directly to the emulator. |
| 1007 | This does not inform the data cache; the data cache uses this. |
| 1008 | MEMADDR is the address in the remote memory space. |
| 1009 | MYADDR is the address of the buffer in our space. |
| 1010 | LEN is the number of bytes. |
| 1011 | |
| 1012 | memaddr - the target's address |
| 1013 | myaddr - gdb's address |
| 1014 | len - number of bytes */ |
| 1015 | |
| 1016 | static void |
| 1017 | es1800_write_bytes (memaddr, myaddr, len) |
| 1018 | CORE_ADDR memaddr; |
| 1019 | char *myaddr; |
| 1020 | int len; |
| 1021 | { |
| 1022 | char buf[PBUFSIZ]; |
| 1023 | int i; |
| 1024 | char *p; |
| 1025 | |
| 1026 | p = myaddr; |
| 1027 | for (i = 0; i < len; i++) |
| 1028 | { |
| 1029 | sprintf (buf, "@.B$%x=$%x", memaddr + i, (*p++) & 0xff); |
| 1030 | send_with_reply (buf, buf, sizeof (buf)); /* FIXME send_command? */ |
| 1031 | } |
| 1032 | } |
| 1033 | |
| 1034 | |
| 1035 | /* Read memory data directly from the emulator. |
| 1036 | This does not use the data cache; the data cache uses this. |
| 1037 | |
| 1038 | memaddr - the target's address |
| 1039 | myaddr - gdb's address |
| 1040 | len - number of bytes */ |
| 1041 | |
| 1042 | static void |
| 1043 | es1800_read_bytes (memaddr, myaddr, len) |
| 1044 | CORE_ADDR memaddr; |
| 1045 | char *myaddr; |
| 1046 | int len; |
| 1047 | { |
| 1048 | static int DB_tab[16] = |
| 1049 | {8, 11, 14, 17, 20, 23, 26, 29, 34, 37, 40, 43, 46, 49, 52, 55}; |
| 1050 | char buf[PBUFSIZ]; |
| 1051 | int i; |
| 1052 | int low_addr; |
| 1053 | char *p; |
| 1054 | char *b; |
| 1055 | |
| 1056 | if (len > PBUFSIZ / 2 - 1) |
| 1057 | { |
| 1058 | abort (); |
| 1059 | } |
| 1060 | |
| 1061 | if (len == 1) /* The emulator does not like expressions like: */ |
| 1062 | { |
| 1063 | len = 2; /* DB.B $20018 TO $20018 */ |
| 1064 | } |
| 1065 | |
| 1066 | /* Reply describes registers byte by byte, each byte encoded as two hex |
| 1067 | characters. */ |
| 1068 | |
| 1069 | sprintf (buf, "DB.B $%x TO $%x", memaddr, memaddr + len - 1); |
| 1070 | send_with_reply (buf, buf, sizeof (buf)); |
| 1071 | b = buf; |
| 1072 | low_addr = memaddr & 0x0f; |
| 1073 | for (i = low_addr; i < low_addr + len; i++) |
| 1074 | { |
| 1075 | if ((!(i % 16)) && i) |
| 1076 | { /* if (i = 16,32,48) */ |
| 1077 | while (*p++ != '\n') |
| 1078 | {; |
| 1079 | } |
| 1080 | b = p; |
| 1081 | } |
| 1082 | p = b + DB_tab[i % 16] + (m68020 ? 2 : 0); |
| 1083 | if (p[0] == 32 || p[1] == 32) |
| 1084 | { |
| 1085 | error ("Emulator reply is too short: %s", buf); |
| 1086 | } |
| 1087 | myaddr[i - low_addr] = fromhex (p[0]) * 16 + fromhex (p[1]); |
| 1088 | } |
| 1089 | } |
| 1090 | |
| 1091 | /* Information about the current target */ |
| 1092 | |
| 1093 | static void |
| 1094 | es1800_files_info (tops) |
| 1095 | struct target_ops *tops; /* Unused */ |
| 1096 | { |
| 1097 | printf ("ES1800 Attached to %s at %d baud in %s mode\n", savename, 19200, |
| 1098 | MODE); |
| 1099 | } |
| 1100 | |
| 1101 | |
| 1102 | /* We read the contents of the target location and stash it, |
| 1103 | then overwrite it with a breakpoint instruction. |
| 1104 | |
| 1105 | addr - is the target location in the target machine. |
| 1106 | contents_cache - is a pointer to memory allocated for saving the target contents. |
| 1107 | It is guaranteed by the caller to be long enough to save sizeof |
| 1108 | BREAKPOINT bytes. |
| 1109 | |
| 1110 | FIXME: This size is target_arch dependent and should be available in |
| 1111 | the target_arch transfer vector, if we ever have one... */ |
| 1112 | |
| 1113 | static int |
| 1114 | es1800_insert_breakpoint (addr, contents_cache) |
| 1115 | CORE_ADDR addr; |
| 1116 | char *contents_cache; |
| 1117 | { |
| 1118 | int val; |
| 1119 | |
| 1120 | val = target_read_memory (addr, contents_cache, sizeof (es1800_break_insn)); |
| 1121 | |
| 1122 | if (val == 0) |
| 1123 | { |
| 1124 | val = target_write_memory (addr, es1800_break_insn, |
| 1125 | sizeof (es1800_break_insn)); |
| 1126 | } |
| 1127 | |
| 1128 | return (val); |
| 1129 | } |
| 1130 | |
| 1131 | |
| 1132 | /* Write back the stashed instruction |
| 1133 | |
| 1134 | addr - is the target location in the target machine. |
| 1135 | contents_cache - is a pointer to memory allocated for saving the target contents. |
| 1136 | It is guaranteed by the caller to be long enough to save sizeof |
| 1137 | BREAKPOINT bytes. */ |
| 1138 | |
| 1139 | static int |
| 1140 | es1800_remove_breakpoint (addr, contents_cache) |
| 1141 | CORE_ADDR addr; |
| 1142 | char *contents_cache; |
| 1143 | { |
| 1144 | |
| 1145 | return (target_write_memory (addr, contents_cache, |
| 1146 | sizeof (es1800_break_insn))); |
| 1147 | } |
| 1148 | |
| 1149 | /* create_break_insn () |
| 1150 | Primitive datastructures containing the es1800 breakpoint instruction */ |
| 1151 | |
| 1152 | static void |
| 1153 | es1800_create_break_insn (ins, vec) |
| 1154 | char *ins; |
| 1155 | int vec; |
| 1156 | { |
| 1157 | if (vec == 15) |
| 1158 | { |
| 1159 | ins[0] = 0x4e; |
| 1160 | ins[1] = 0x4f; |
| 1161 | } |
| 1162 | } |
| 1163 | |
| 1164 | |
| 1165 | /* verify_break () |
| 1166 | Seach for breakpoint routine in emulator memory. |
| 1167 | returns non-zero on failure |
| 1168 | vec - trap vector used for breakpoints */ |
| 1169 | |
| 1170 | static int |
| 1171 | verify_break (vec) |
| 1172 | int vec; |
| 1173 | { |
| 1174 | CORE_ADDR memaddress; |
| 1175 | char buf[8]; |
| 1176 | char *instr = "NqNqNqNs"; /* breakpoint routine */ |
| 1177 | int status; |
| 1178 | |
| 1179 | get_break_addr (vec, &memaddress); |
| 1180 | |
| 1181 | if (memaddress) |
| 1182 | { |
| 1183 | status = target_read_memory (memaddress, buf, 8); |
| 1184 | if (status != 0) |
| 1185 | { |
| 1186 | memory_error (status, memaddress); |
| 1187 | } |
| 1188 | return (STRCMP (instr, buf)); |
| 1189 | } |
| 1190 | return (-1); |
| 1191 | } |
| 1192 | |
| 1193 | |
| 1194 | /* get_break_addr () |
| 1195 | find address of breakpint routine |
| 1196 | vec - trap vector used for breakpoints |
| 1197 | addrp - store the address here */ |
| 1198 | |
| 1199 | static void |
| 1200 | get_break_addr (vec, addrp) |
| 1201 | int vec; |
| 1202 | CORE_ADDR *addrp; |
| 1203 | { |
| 1204 | CORE_ADDR memaddress = 0; |
| 1205 | int status; |
| 1206 | int k; |
| 1207 | char buf[PBUFSIZ]; |
| 1208 | char base_addr[4]; |
| 1209 | char *p; |
| 1210 | |
| 1211 | if (m68020) |
| 1212 | { |
| 1213 | send_with_reply ("VBR ", buf, sizeof (buf)); |
| 1214 | p = buf; |
| 1215 | for (k = 0; k < 4; k++) |
| 1216 | { |
| 1217 | if ((p[k * 2 + 1] == 0) || (p[k * 2 + 2] == 0)) |
| 1218 | { |
| 1219 | error ("Emulator reply is too short: %s", buf); |
| 1220 | } |
| 1221 | base_addr[k] = (fromhex (p[k * 2 + 1]) * 16) + fromhex (p[k * 2 + 2]); |
| 1222 | } |
| 1223 | /* base addr of exception vector table */ |
| 1224 | memaddress = *((CORE_ADDR *) base_addr); |
| 1225 | } |
| 1226 | |
| 1227 | memaddress += (vec + 32) * 4; /* address of trap vector */ |
| 1228 | status = target_read_memory (memaddress, (char *) addrp, 4); |
| 1229 | if (status != 0) |
| 1230 | { |
| 1231 | memory_error (status, memaddress); |
| 1232 | } |
| 1233 | } |
| 1234 | |
| 1235 | |
| 1236 | /* Kill an inferior process */ |
| 1237 | |
| 1238 | static void |
| 1239 | es1800_kill () |
| 1240 | { |
| 1241 | if (inferior_pid != 0) |
| 1242 | { |
| 1243 | inferior_pid = 0; |
| 1244 | es1800_mourn_inferior (); |
| 1245 | } |
| 1246 | } |
| 1247 | |
| 1248 | |
| 1249 | /* Load a file to the ES1800 emulator. |
| 1250 | Converts the file from a.out format into Extended Tekhex format |
| 1251 | before the file is loaded. |
| 1252 | Also loads the trap routine, and sets the ES1800 breakpoint on it |
| 1253 | filename - the a.out to be loaded |
| 1254 | from_tty - says whether to be verbose or not |
| 1255 | FIXME Uses emulator overlay memory for trap routine */ |
| 1256 | |
| 1257 | static void |
| 1258 | es1800_load (filename, from_tty) |
| 1259 | char *filename; |
| 1260 | int from_tty; |
| 1261 | { |
| 1262 | |
| 1263 | FILE *instream; |
| 1264 | char loadname[15]; |
| 1265 | char buf[160]; |
| 1266 | struct cleanup *old_chain; |
| 1267 | int es1800_load_format = 5; |
| 1268 | |
| 1269 | if (es1800_desc == NULL) |
| 1270 | { |
| 1271 | printf ("No emulator attached, type emulator-command first\n"); |
| 1272 | return; |
| 1273 | } |
| 1274 | |
| 1275 | filename = tilde_expand (filename); |
| 1276 | make_cleanup (free, filename); |
| 1277 | |
| 1278 | switch (es1800_load_format) |
| 1279 | { |
| 1280 | case 2: /* Extended Tekhex */ |
| 1281 | if (from_tty) |
| 1282 | { |
| 1283 | printf ("Converting \"%s\" to Extended Tekhex Format\n", filename); |
| 1284 | } |
| 1285 | sprintf (buf, "tekhex %s", filename); |
| 1286 | system (buf); |
| 1287 | sprintf (loadname, "out.hex"); |
| 1288 | break; |
| 1289 | |
| 1290 | case 5: /* Motorola S-rec */ |
| 1291 | if (from_tty) |
| 1292 | { |
| 1293 | printf ("Converting \"%s\" to Motorola S-record format\n", |
| 1294 | filename); |
| 1295 | } |
| 1296 | /* in the future the source code in copy (part of binutils-1.93) will |
| 1297 | be included in this file */ |
| 1298 | sprintf (buf, |
| 1299 | "copy -s \"a.out-sunos-big\" -d \"srec\" %s /tmp/out.hex", |
| 1300 | filename); |
| 1301 | system (buf); |
| 1302 | sprintf (loadname, "/tmp/out.hex"); |
| 1303 | break; |
| 1304 | |
| 1305 | default: |
| 1306 | error ("Downloading format not defined\n"); |
| 1307 | } |
| 1308 | |
| 1309 | breakpoint_init_inferior (); |
| 1310 | inferior_pid = 0; |
| 1311 | if (from_tty) |
| 1312 | { |
| 1313 | printf ("Downloading \"%s\" to the ES 1800\n", filename); |
| 1314 | } |
| 1315 | if ((instream = fopen (loadname, "r")) == NULL) |
| 1316 | { |
| 1317 | perror_with_name ("fopen:"); |
| 1318 | } |
| 1319 | |
| 1320 | old_chain = make_cleanup (fclose, instream); |
| 1321 | immediate_quit++; |
| 1322 | |
| 1323 | es1800_reset (0); |
| 1324 | |
| 1325 | download (instream, from_tty, es1800_load_format); |
| 1326 | |
| 1327 | /* if breakpoint routine is not present anymore we have to check |
| 1328 | whether to download a new breakpoint routine or not */ |
| 1329 | |
| 1330 | if ((verify_break (es1800_break_vec) != 0) |
| 1331 | && query ("No breakpoint routine in ES 1800 emulator!\nDownload a breakpoint routine to the emulator? ")) |
| 1332 | { |
| 1333 | char buf[128]; |
| 1334 | printf ("Using break vector 0x%x\n", es1800_break_vec); |
| 1335 | sprintf (buf, "0x%x ", es1800_break_vec); |
| 1336 | printf ("Give the start address of the breakpoint routine: "); |
| 1337 | fgets (buf + strlen (buf), sizeof (buf) - strlen (buf), stdin); |
| 1338 | es1800_init_break (buf, 0); |
| 1339 | } |
| 1340 | |
| 1341 | do_cleanups (old_chain); |
| 1342 | expect_prompt (); |
| 1343 | readchar (); /* FIXME I am getting a ^G = 7 after the prompt */ |
| 1344 | printf ("\n"); |
| 1345 | |
| 1346 | if (fclose (instream) == EOF) |
| 1347 | { |
| 1348 | ; |
| 1349 | } |
| 1350 | |
| 1351 | if (es1800_load_format != 2) |
| 1352 | { |
| 1353 | sprintf (buf, "/usr/bin/rm %s", loadname); |
| 1354 | system (buf); |
| 1355 | } |
| 1356 | |
| 1357 | symbol_file_command (filename, from_tty); /* reading symbol table */ |
| 1358 | immediate_quit--; |
| 1359 | } |
| 1360 | |
| 1361 | #if 0 |
| 1362 | |
| 1363 | #define NUMCPYBYTES 20 |
| 1364 | |
| 1365 | static void |
| 1366 | bfd_copy (from_bfd, to_bfd) |
| 1367 | bfd *from_bfd; |
| 1368 | bfd *to_bfd; |
| 1369 | { |
| 1370 | asection *p, *new; |
| 1371 | int i; |
| 1372 | char buf[NUMCPYBYTES]; |
| 1373 | |
| 1374 | for (p = from_bfd->sections; p != NULL; p = p->next) |
| 1375 | { |
| 1376 | printf (" Copying section %s. Size = %x.\n", p->name, p->_cooked_size); |
| 1377 | printf (" vma = %x, offset = %x, output_sec = %x\n", |
| 1378 | p->vma, p->output_offset, p->output_section); |
| 1379 | new = bfd_make_section (to_bfd, p->name); |
| 1380 | if (p->_cooked_size && |
| 1381 | !bfd_set_section_size (to_bfd, new, p->_cooked_size)) |
| 1382 | { |
| 1383 | error ("Wrong BFD size!\n"); |
| 1384 | } |
| 1385 | if (!bfd_set_section_flags (to_bfd, new, p->flags)) |
| 1386 | { |
| 1387 | error ("bfd_set_section_flags"); |
| 1388 | } |
| 1389 | new->vma = p->vma; |
| 1390 | |
| 1391 | for (i = 0; (i + NUMCPYBYTES) < p->_cooked_size; i += NUMCPYBYTES) |
| 1392 | { |
| 1393 | if (!bfd_get_section_contents (from_bfd, p, (PTR) buf, (file_ptr) i, |
| 1394 | (bfd_size_type) NUMCPYBYTES)) |
| 1395 | { |
| 1396 | error ("bfd_get_section_contents\n"); |
| 1397 | } |
| 1398 | if (!bfd_set_section_contents (to_bfd, new, (PTR) buf, (file_ptr) i, |
| 1399 | (bfd_size_type) NUMCPYBYTES)) |
| 1400 | { |
| 1401 | error ("bfd_set_section_contents\n"); |
| 1402 | } |
| 1403 | } |
| 1404 | bfd_get_section_contents (from_bfd, p, (PTR) buf, (file_ptr) i, |
| 1405 | (bfd_size_type) (p->_cooked_size - i)); |
| 1406 | bfd_set_section_contents (to_bfd, new, (PTR) buf, (file_ptr) i, |
| 1407 | (bfd_size_type) (p->_cooked_size - i)); |
| 1408 | } |
| 1409 | } |
| 1410 | |
| 1411 | #endif |
| 1412 | |
| 1413 | /* Start an process on the es1800 and set inferior_pid to the new |
| 1414 | process' pid. |
| 1415 | execfile - the file to run |
| 1416 | args - arguments passed to the program |
| 1417 | env - the environment vector to pass */ |
| 1418 | |
| 1419 | static void |
| 1420 | es1800_create_inferior (execfile, args, env) |
| 1421 | char *execfile; |
| 1422 | char *args; |
| 1423 | char **env; |
| 1424 | { |
| 1425 | int entry_pt; |
| 1426 | int pid; |
| 1427 | #if 0 |
| 1428 | struct expression *expr; |
| 1429 | register struct cleanup *old_chain = 0; |
| 1430 | register value val; |
| 1431 | #endif |
| 1432 | |
| 1433 | if (args && *args) |
| 1434 | { |
| 1435 | error ("Can't pass arguments to remote ES1800 process"); |
| 1436 | } |
| 1437 | |
| 1438 | #if 0 |
| 1439 | if (query ("Use 'start' as entry point? ")) |
| 1440 | { |
| 1441 | expr = parse_c_expression ("start"); |
| 1442 | old_chain = make_cleanup (free_current_contents, &expr); |
| 1443 | val = evaluate_expression (expr); |
| 1444 | entry_pt = (val->location).address; |
| 1445 | } |
| 1446 | else |
| 1447 | { |
| 1448 | printf ("Enter the program's entry point (in hexadecimal): "); |
| 1449 | scanf ("%x", &entry_pt); |
| 1450 | } |
| 1451 | #endif |
| 1452 | |
| 1453 | if (execfile == 0 || exec_bfd == 0) |
| 1454 | { |
| 1455 | error ("No executable file specified"); |
| 1456 | } |
| 1457 | |
| 1458 | entry_pt = (int) bfd_get_start_address (exec_bfd); |
| 1459 | |
| 1460 | pid = 42; |
| 1461 | |
| 1462 | /* Now that we have a child process, make it our target. */ |
| 1463 | |
| 1464 | push_target (&es1800_child_ops); |
| 1465 | |
| 1466 | /* The "process" (board) is already stopped awaiting our commands, and |
| 1467 | the program is already downloaded. We just set its PC and go. */ |
| 1468 | |
| 1469 | inferior_pid = pid; /* Needed for wait_for_inferior below */ |
| 1470 | |
| 1471 | clear_proceed_status (); |
| 1472 | |
| 1473 | /* Tell wait_for_inferior that we've started a new process. */ |
| 1474 | |
| 1475 | init_wait_for_inferior (); |
| 1476 | |
| 1477 | /* Set up the "saved terminal modes" of the inferior |
| 1478 | based on what modes we are starting it with. */ |
| 1479 | |
| 1480 | target_terminal_init (); |
| 1481 | |
| 1482 | /* Install inferior's terminal modes. */ |
| 1483 | |
| 1484 | target_terminal_inferior (); |
| 1485 | |
| 1486 | /* remote_start (args); */ |
| 1487 | /* trap_expected = 0; */ |
| 1488 | /* insert_step_breakpoint (); FIXME, do we need this? */ |
| 1489 | |
| 1490 | /* Let 'er rip... */ |
| 1491 | proceed ((CORE_ADDR) entry_pt, TARGET_SIGNAL_DEFAULT, 0); |
| 1492 | |
| 1493 | } |
| 1494 | |
| 1495 | |
| 1496 | /* The process has died, clean up. */ |
| 1497 | |
| 1498 | static void |
| 1499 | es1800_mourn_inferior () |
| 1500 | { |
| 1501 | remove_breakpoints (); |
| 1502 | unpush_target (&es1800_child_ops); |
| 1503 | generic_mourn_inferior (); /* Do all the proper things now */ |
| 1504 | } |
| 1505 | |
| 1506 | /* ES1800-protocol specific routines */ |
| 1507 | |
| 1508 | /* Keep discarding input from the remote system, until STRING is found. |
| 1509 | Let the user break out immediately. |
| 1510 | string - the string to expect |
| 1511 | nowait - break out if string not the emulator's first respond otherwise |
| 1512 | read until string is found (== 0) */ |
| 1513 | |
| 1514 | static void |
| 1515 | expect (string, nowait) |
| 1516 | char *string; |
| 1517 | int nowait; |
| 1518 | { |
| 1519 | char c; |
| 1520 | char *p = string; |
| 1521 | |
| 1522 | immediate_quit++; |
| 1523 | while (1) |
| 1524 | { |
| 1525 | c = readchar (); |
| 1526 | if (isalpha (c)) |
| 1527 | { |
| 1528 | c = toupper (c); |
| 1529 | } |
| 1530 | if (c == toupper (*p)) |
| 1531 | { |
| 1532 | p++; |
| 1533 | if (*p == '\0') |
| 1534 | { |
| 1535 | immediate_quit--; |
| 1536 | return; |
| 1537 | } |
| 1538 | } |
| 1539 | else if (!nowait) |
| 1540 | { |
| 1541 | p = string; |
| 1542 | } |
| 1543 | else |
| 1544 | { |
| 1545 | printf ("\'%s\' expected\n", string); |
| 1546 | printf ("char %d is %d", p - string, c); |
| 1547 | error ("\n"); |
| 1548 | } |
| 1549 | } |
| 1550 | } |
| 1551 | |
| 1552 | /* Keep discarding input until we see the prompt. */ |
| 1553 | |
| 1554 | static void |
| 1555 | expect_prompt () |
| 1556 | { |
| 1557 | expect (">", 0); |
| 1558 | } |
| 1559 | |
| 1560 | |
| 1561 | /* Read one character */ |
| 1562 | |
| 1563 | #ifdef DEBUG_STDIN |
| 1564 | |
| 1565 | /* read from stdin */ |
| 1566 | |
| 1567 | static int |
| 1568 | readchar () |
| 1569 | { |
| 1570 | char buf[1]; |
| 1571 | |
| 1572 | buf[0] = '\0'; |
| 1573 | printf ("readchar, give one character\n"); |
| 1574 | read (0, buf, 1); |
| 1575 | |
| 1576 | #if defined (LOG_FILE) |
| 1577 | putc (buf[0] & 0x7f, log_file); |
| 1578 | #endif |
| 1579 | |
| 1580 | return (buf[0] & 0x7f); |
| 1581 | } |
| 1582 | |
| 1583 | #else /* !DEBUG_STDIN */ |
| 1584 | |
| 1585 | /* Read a character from the remote system, doing all the fancy |
| 1586 | timeout stuff. */ |
| 1587 | |
| 1588 | static int |
| 1589 | readchar () |
| 1590 | { |
| 1591 | int ch; |
| 1592 | |
| 1593 | ch = SERIAL_READCHAR (es1800_desc, timeout); |
| 1594 | |
| 1595 | /* FIXME: doing an error() here will probably cause trouble, at least if from |
| 1596 | es1800_wait. */ |
| 1597 | if (ch == SERIAL_TIMEOUT) |
| 1598 | error ("Timeout reading from remote system."); |
| 1599 | else if (ch == SERIAL_ERROR) |
| 1600 | perror_with_name ("remote read"); |
| 1601 | |
| 1602 | #if defined (LOG_FILE) |
| 1603 | putc (ch & 0x7f, log_file); |
| 1604 | fflush (log_file); |
| 1605 | #endif |
| 1606 | |
| 1607 | return (ch); |
| 1608 | } |
| 1609 | |
| 1610 | #endif /* DEBUG_STDIN */ |
| 1611 | |
| 1612 | |
| 1613 | /* Send a command to the emulator and save the reply. |
| 1614 | Report an error if we get an error reply. |
| 1615 | string - the es1800 command |
| 1616 | buf - containing the emulator reply on return |
| 1617 | len - size of buf */ |
| 1618 | |
| 1619 | static void |
| 1620 | send_with_reply (string, buf, len) |
| 1621 | char *string, *buf; |
| 1622 | int len; |
| 1623 | { |
| 1624 | send (string); |
| 1625 | SERIAL_WRITE (es1800_desc, "\r", 1); |
| 1626 | |
| 1627 | #ifndef DEBUG_STDIN |
| 1628 | expect (string, 1); |
| 1629 | expect ("\r\n", 0); |
| 1630 | #endif |
| 1631 | |
| 1632 | getmessage (buf, len); |
| 1633 | } |
| 1634 | |
| 1635 | |
| 1636 | /* Send the command in STR to the emulator adding \r. check |
| 1637 | the echo for consistency. |
| 1638 | string - the es1800 command */ |
| 1639 | |
| 1640 | static void |
| 1641 | send_command (string) |
| 1642 | char *string; |
| 1643 | { |
| 1644 | send (string); |
| 1645 | SERIAL_WRITE (es1800_desc, "\r", 1); |
| 1646 | |
| 1647 | #ifndef DEBUG_STDIN |
| 1648 | expect (string, 0); |
| 1649 | expect_prompt (); |
| 1650 | #endif |
| 1651 | |
| 1652 | } |
| 1653 | |
| 1654 | /* Send a string |
| 1655 | string - the es1800 command */ |
| 1656 | |
| 1657 | static void |
| 1658 | send (string) |
| 1659 | char *string; |
| 1660 | { |
| 1661 | if (kiodebug) |
| 1662 | { |
| 1663 | fprintf (stderr, "Sending: %s\n", string); |
| 1664 | } |
| 1665 | SERIAL_WRITE (es1800_desc, string, strlen (string)); |
| 1666 | } |
| 1667 | |
| 1668 | |
| 1669 | /* Read a message from the emulator and store it in BUF. |
| 1670 | buf - containing the emulator reply on return |
| 1671 | len - size of buf */ |
| 1672 | |
| 1673 | static void |
| 1674 | getmessage (buf, len) |
| 1675 | char *buf; |
| 1676 | int len; |
| 1677 | { |
| 1678 | char *bp; |
| 1679 | int c; |
| 1680 | int prompt_found = 0; |
| 1681 | extern kiodebug; |
| 1682 | |
| 1683 | #if defined (LOG_FILE) |
| 1684 | /* This is a convenient place to do this. The idea is to do it often |
| 1685 | enough that we never lose much data if we terminate abnormally. */ |
| 1686 | fflush (log_file); |
| 1687 | #endif |
| 1688 | |
| 1689 | bp = buf; |
| 1690 | c = readchar (); |
| 1691 | do |
| 1692 | { |
| 1693 | if (c) |
| 1694 | { |
| 1695 | if (len-- < 2) /* char and terminaling NULL */ |
| 1696 | { |
| 1697 | error ("input buffer overrun\n"); |
| 1698 | } |
| 1699 | *bp++ = c; |
| 1700 | } |
| 1701 | c = readchar (); |
| 1702 | if ((c == '>') && (*(bp - 1) == ' ')) |
| 1703 | { |
| 1704 | prompt_found = 1; |
| 1705 | } |
| 1706 | } |
| 1707 | while (!prompt_found); |
| 1708 | *bp = 0; |
| 1709 | |
| 1710 | if (kiodebug) |
| 1711 | { |
| 1712 | fprintf (stderr, "message received :%s\n", buf); |
| 1713 | } |
| 1714 | } |
| 1715 | |
| 1716 | static void |
| 1717 | download (instream, from_tty, format) |
| 1718 | FILE *instream; |
| 1719 | int from_tty; |
| 1720 | int format; |
| 1721 | { |
| 1722 | char c; |
| 1723 | char buf[160]; |
| 1724 | int i = 0; |
| 1725 | |
| 1726 | send_command ("SET #2,$1A"); /* reset char = ^Z */ |
| 1727 | send_command ("SET #3,$11,$13"); /* XON XOFF */ |
| 1728 | if (format == 2) |
| 1729 | { |
| 1730 | send_command ("SET #26,#2"); |
| 1731 | } |
| 1732 | else |
| 1733 | { |
| 1734 | send_command ("SET #26,#5"); /* Format=Extended Tekhex */ |
| 1735 | } |
| 1736 | send_command ("DFB = $10"); |
| 1737 | send_command ("PUR"); |
| 1738 | send_command ("CES"); |
| 1739 | send ("DNL\r"); |
| 1740 | expect ("DNL", 1); |
| 1741 | if (from_tty) |
| 1742 | { |
| 1743 | printf (" 0 records loaded...\r"); |
| 1744 | } |
| 1745 | while (fgets (buf, 160, instream)) |
| 1746 | { |
| 1747 | send (buf); |
| 1748 | if (from_tty) |
| 1749 | { |
| 1750 | printf ("%5d\b\b\b\b\b", ++i); |
| 1751 | fflush (stdout); |
| 1752 | } |
| 1753 | if ((c = readchar ()) != 006) |
| 1754 | { |
| 1755 | error ("expected ACK"); |
| 1756 | } |
| 1757 | } |
| 1758 | if (from_tty) |
| 1759 | { |
| 1760 | printf ("- All"); |
| 1761 | } |
| 1762 | } |
| 1763 | |
| 1764 | /* Additional commands */ |
| 1765 | |
| 1766 | #if defined (TIOCGETP) && defined (FNDELAY) && defined (EWOULDBLOCK) |
| 1767 | #define PROVIDE_TRANSPARENT |
| 1768 | #endif |
| 1769 | |
| 1770 | #ifdef PROVIDE_TRANSPARENT |
| 1771 | /* Talk directly to the emulator |
| 1772 | FIXME, uses busy wait, and is SUNOS (or at least BSD) specific */ |
| 1773 | |
| 1774 | /*ARGSUSED */ |
| 1775 | static void |
| 1776 | es1800_transparent (args, from_tty) |
| 1777 | char *args; |
| 1778 | int from_tty; |
| 1779 | { |
| 1780 | int console; |
| 1781 | struct sgttyb modebl; |
| 1782 | int fcflag; |
| 1783 | int cc; |
| 1784 | struct sgttyb console_mode_save; |
| 1785 | int console_fc_save; |
| 1786 | int es1800_fc_save; |
| 1787 | int inputcnt = 80; |
| 1788 | char inputbuf[80]; |
| 1789 | int consolecnt = 0; |
| 1790 | char consolebuf[80]; |
| 1791 | int es1800_cnt = 0; |
| 1792 | char es1800_buf[80]; |
| 1793 | int i; |
| 1794 | |
| 1795 | dont_repeat (); |
| 1796 | if (es1800_desc == NULL) |
| 1797 | { |
| 1798 | printf ("No emulator attached, type emulator-command first\n"); |
| 1799 | return; |
| 1800 | } |
| 1801 | |
| 1802 | printf ("\n"); |
| 1803 | printf ("You are now communicating directly with the ES 1800 emulator.\n"); |
| 1804 | printf ("To leave this mode (transparent mode), press ^E.\n"); |
| 1805 | printf ("\n"); |
| 1806 | printf (" >"); |
| 1807 | fflush (stdout); |
| 1808 | |
| 1809 | if ((console = open ("/dev/tty", O_RDWR)) == -1) |
| 1810 | { |
| 1811 | perror_with_name ("/dev/tty:"); |
| 1812 | } |
| 1813 | |
| 1814 | if ((fcflag = fcntl (console, F_GETFL, 0)) == -1) |
| 1815 | { |
| 1816 | perror_with_name ("fcntl console"); |
| 1817 | } |
| 1818 | |
| 1819 | console_fc_save = fcflag; |
| 1820 | fcflag = fcflag | FNDELAY; |
| 1821 | |
| 1822 | if (fcntl (console, F_SETFL, fcflag) == -1) |
| 1823 | { |
| 1824 | perror_with_name ("fcntl console"); |
| 1825 | } |
| 1826 | |
| 1827 | if (ioctl (console, TIOCGETP, &modebl)) |
| 1828 | { |
| 1829 | perror_with_name ("ioctl console"); |
| 1830 | } |
| 1831 | |
| 1832 | console_mode_save = modebl; |
| 1833 | modebl.sg_flags = RAW; |
| 1834 | |
| 1835 | if (ioctl (console, TIOCSETP, &modebl)) |
| 1836 | { |
| 1837 | perror_with_name ("ioctl console"); |
| 1838 | } |
| 1839 | |
| 1840 | if ((fcflag = fcntl (DEPRECATED_SERIAL_FD (es1800_desc), F_GETFL, 0)) == -1) |
| 1841 | { |
| 1842 | perror_with_name ("fcntl serial"); |
| 1843 | } |
| 1844 | |
| 1845 | es1800_fc_save = fcflag; |
| 1846 | fcflag = fcflag | FNDELAY; |
| 1847 | |
| 1848 | if (fcntl (DEPRECATED_SERIAL_FD (es1800_desc), F_SETFL, fcflag) == -1) |
| 1849 | { |
| 1850 | perror_with_name ("fcntl serial"); |
| 1851 | } |
| 1852 | |
| 1853 | while (1) |
| 1854 | { |
| 1855 | cc = read (console, inputbuf, inputcnt); |
| 1856 | if (cc != -1) |
| 1857 | { |
| 1858 | if ((*inputbuf & 0x7f) == 0x05) |
| 1859 | { |
| 1860 | break; |
| 1861 | } |
| 1862 | for (i = 0; i < cc;) |
| 1863 | { |
| 1864 | es1800_buf[es1800_cnt++] = inputbuf[i++]; |
| 1865 | } |
| 1866 | if ((cc = SERIAL_WRITE (es1800_desc, es1800_buf, es1800_cnt)) == -1) |
| 1867 | { |
| 1868 | perror_with_name ("FEL! write:"); |
| 1869 | } |
| 1870 | es1800_cnt -= cc; |
| 1871 | if (es1800_cnt && cc) |
| 1872 | { |
| 1873 | for (i = 0; i < es1800_cnt; i++) |
| 1874 | { |
| 1875 | es1800_buf[i] = es1800_buf[cc + i]; |
| 1876 | } |
| 1877 | } |
| 1878 | } |
| 1879 | else if (errno != EWOULDBLOCK) |
| 1880 | { |
| 1881 | perror_with_name ("FEL! read:"); |
| 1882 | } |
| 1883 | |
| 1884 | cc = read (DEPRECATED_SERIAL_FD (es1800_desc), inputbuf, inputcnt); |
| 1885 | if (cc != -1) |
| 1886 | { |
| 1887 | for (i = 0; i < cc;) |
| 1888 | { |
| 1889 | consolebuf[consolecnt++] = inputbuf[i++]; |
| 1890 | } |
| 1891 | if ((cc = write (console, consolebuf, consolecnt)) == -1) |
| 1892 | { |
| 1893 | perror_with_name ("FEL! write:"); |
| 1894 | } |
| 1895 | consolecnt -= cc; |
| 1896 | if (consolecnt && cc) |
| 1897 | { |
| 1898 | for (i = 0; i < consolecnt; i++) |
| 1899 | { |
| 1900 | consolebuf[i] = consolebuf[cc + i]; |
| 1901 | } |
| 1902 | } |
| 1903 | } |
| 1904 | else if (errno != EWOULDBLOCK) |
| 1905 | { |
| 1906 | perror_with_name ("FEL! read:"); |
| 1907 | } |
| 1908 | } |
| 1909 | |
| 1910 | console_fc_save = console_fc_save & !FNDELAY; |
| 1911 | if (fcntl (console, F_SETFL, console_fc_save) == -1) |
| 1912 | { |
| 1913 | perror_with_name ("FEL! fcntl"); |
| 1914 | } |
| 1915 | |
| 1916 | if (ioctl (console, TIOCSETP, &console_mode_save)) |
| 1917 | { |
| 1918 | perror_with_name ("FEL! ioctl"); |
| 1919 | } |
| 1920 | |
| 1921 | close (console); |
| 1922 | |
| 1923 | if (fcntl (DEPRECATED_SERIAL_FD (es1800_desc), F_SETFL, es1800_fc_save) == -1) |
| 1924 | { |
| 1925 | perror_with_name ("FEL! fcntl"); |
| 1926 | } |
| 1927 | |
| 1928 | printf ("\n"); |
| 1929 | |
| 1930 | } |
| 1931 | #endif /* PROVIDE_TRANSPARENT */ |
| 1932 | |
| 1933 | static void |
| 1934 | es1800_init_break (args, from_tty) |
| 1935 | char *args; |
| 1936 | int from_tty; |
| 1937 | { |
| 1938 | CORE_ADDR memaddress = 0; |
| 1939 | char buf[PBUFSIZ]; |
| 1940 | char base_addr[4]; |
| 1941 | char *space_index; |
| 1942 | char *p; |
| 1943 | int k; |
| 1944 | |
| 1945 | if (args == NULL) |
| 1946 | { |
| 1947 | error_no_arg ("a trap vector"); |
| 1948 | } |
| 1949 | |
| 1950 | if (!(space_index = strchr (args, ' '))) |
| 1951 | { |
| 1952 | error ("Two arguments needed (trap vector and address of break routine).\n"); |
| 1953 | } |
| 1954 | |
| 1955 | *space_index = '\0'; |
| 1956 | |
| 1957 | es1800_break_vec = strtol (args, (char **) NULL, 0); |
| 1958 | es1800_break_address = parse_and_eval_address (space_index + 1); |
| 1959 | |
| 1960 | es1800_create_break_insn (es1800_break_insn, es1800_break_vec); |
| 1961 | |
| 1962 | if (m68020) |
| 1963 | { |
| 1964 | send_with_reply ("VBR ", buf, sizeof (buf)); |
| 1965 | p = buf; |
| 1966 | for (k = 0; k < 4; k++) |
| 1967 | { |
| 1968 | if ((p[k * 2 + 1] == 0) || (p[k * 2 + 2] == 0)) |
| 1969 | { |
| 1970 | error ("Emulator reply is too short: %s", buf); |
| 1971 | } |
| 1972 | base_addr[k] = (fromhex (p[k * 2 + 1]) * 16) + fromhex (p[k * 2 + 2]); |
| 1973 | } |
| 1974 | /* base addr of exception vector table */ |
| 1975 | memaddress = *((CORE_ADDR *) base_addr); |
| 1976 | } |
| 1977 | |
| 1978 | memaddress += (es1800_break_vec + 32) * 4; /* address of trap vector */ |
| 1979 | |
| 1980 | sprintf (buf, "@.L%lx=$%lx", memaddress, es1800_break_address); |
| 1981 | send_command (buf); /* set the address of the break routine in the */ |
| 1982 | /* trap vector */ |
| 1983 | |
| 1984 | sprintf (buf, "@.L%lx=$4E714E71", es1800_break_address); /* NOP; NOP */ |
| 1985 | send_command (buf); |
| 1986 | sprintf (buf, "@.L%lx=$4E714E73", es1800_break_address + 4); /* NOP; RTE */ |
| 1987 | send_command (buf); |
| 1988 | |
| 1989 | sprintf (buf, "AC2=$%lx", es1800_break_address + 4); |
| 1990 | /* breakpoint at es1800-break_address */ |
| 1991 | send_command (buf); |
| 1992 | send_command ("WHEN AC2 THEN BRK"); /* ie in exception routine */ |
| 1993 | |
| 1994 | if (from_tty) |
| 1995 | { |
| 1996 | printf ("Breakpoint (trap $%x) routine at address: %lx\n", |
| 1997 | es1800_break_vec, es1800_break_address); |
| 1998 | } |
| 1999 | } |
| 2000 | |
| 2001 | static void |
| 2002 | es1800_child_open (arg, from_tty) |
| 2003 | char *arg; |
| 2004 | int from_tty; |
| 2005 | { |
| 2006 | error ("Use the \"run\" command to start a child process."); |
| 2007 | } |
| 2008 | |
| 2009 | static void |
| 2010 | es1800_child_detach (args, from_tty) |
| 2011 | char *args; |
| 2012 | int from_tty; |
| 2013 | { |
| 2014 | if (args) |
| 2015 | { |
| 2016 | error ("Argument given to \"detach\" when remotely debugging."); |
| 2017 | } |
| 2018 | |
| 2019 | pop_target (); |
| 2020 | if (from_tty) |
| 2021 | { |
| 2022 | printf ("Ending debugging the process %d.\n", inferior_pid); |
| 2023 | } |
| 2024 | } |
| 2025 | |
| 2026 | |
| 2027 | /* Define the target subroutine names */ |
| 2028 | |
| 2029 | struct target_ops es1800_ops; |
| 2030 | |
| 2031 | static void |
| 2032 | init_es1800_ops (void) |
| 2033 | { |
| 2034 | es1800_ops.to_shortname = "es1800"; |
| 2035 | es1800_ops.to_longname = "Remote serial target in ES1800-emulator protocol"; |
| 2036 | es1800_ops.to_doc = "Remote debugging on the es1800 emulator via a serial line.\n\ |
| 2037 | Specify the serial device it is connected to (e.g. /dev/ttya)."; |
| 2038 | es1800_ops.to_open = es1800_open; |
| 2039 | es1800_ops.to_close = es1800_close; |
| 2040 | es1800_ops.to_attach = es1800_attach; |
| 2041 | es1800_ops.to_post_attach = NULL; |
| 2042 | es1800_ops.to_require_attach = NULL; |
| 2043 | es1800_ops.to_detach = es1800_detach; |
| 2044 | es1800_ops.to_require_detach = NULL; |
| 2045 | es1800_ops.to_resume = es1800_resume; |
| 2046 | es1800_ops.to_wait = NULL; |
| 2047 | es1800_ops.to_post_wait = NULL; |
| 2048 | es1800_ops.to_fetch_registers = NULL; |
| 2049 | es1800_ops.to_store_registers = NULL; |
| 2050 | es1800_ops.to_prepare_to_store = es1800_prepare_to_store; |
| 2051 | es1800_ops.to_xfer_memory = es1800_xfer_inferior_memory; |
| 2052 | es1800_ops.to_files_info = es1800_files_info; |
| 2053 | es1800_ops.to_insert_breakpoint = es1800_insert_breakpoint; |
| 2054 | es1800_ops.to_remove_breakpoint = es1800_remove_breakpoint; |
| 2055 | es1800_ops.to_terminal_init = NULL; |
| 2056 | es1800_ops.to_terminal_inferior = NULL; |
| 2057 | es1800_ops.to_terminal_ours_for_output = NULL; |
| 2058 | es1800_ops.to_terminal_ours = NULL; |
| 2059 | es1800_ops.to_terminal_info = NULL; |
| 2060 | es1800_ops.to_kill = NULL; |
| 2061 | es1800_ops.to_load = es1800_load; |
| 2062 | es1800_ops.to_lookup_symbol = NULL; |
| 2063 | es1800_ops.to_create_inferior = es1800_create_inferior; |
| 2064 | es1800_ops.to_post_startup_inferior = NULL; |
| 2065 | es1800_ops.to_acknowledge_created_inferior = NULL; |
| 2066 | es1800_ops.to_clone_and_follow_inferior = NULL; |
| 2067 | es1800_ops.to_post_follow_inferior_by_clone = NULL; |
| 2068 | es1800_ops.to_insert_fork_catchpoint = NULL; |
| 2069 | es1800_ops.to_remove_fork_catchpoint = NULL; |
| 2070 | es1800_ops.to_insert_vfork_catchpoint = NULL; |
| 2071 | es1800_ops.to_remove_vfork_catchpoint = NULL; |
| 2072 | es1800_ops.to_has_forked = NULL; |
| 2073 | es1800_ops.to_has_vforked = NULL; |
| 2074 | es1800_ops.to_can_follow_vfork_prior_to_exec = NULL; |
| 2075 | es1800_ops.to_post_follow_vfork = NULL; |
| 2076 | es1800_ops.to_insert_exec_catchpoint = NULL; |
| 2077 | es1800_ops.to_remove_exec_catchpoint = NULL; |
| 2078 | es1800_ops.to_has_execd = NULL; |
| 2079 | es1800_ops.to_reported_exec_events_per_exec_call = NULL; |
| 2080 | es1800_ops.to_has_exited = NULL; |
| 2081 | es1800_ops.to_mourn_inferior = NULL; |
| 2082 | es1800_ops.to_can_run = 0; |
| 2083 | es1800_ops.to_notice_signals = 0; |
| 2084 | es1800_ops.to_thread_alive = 0; |
| 2085 | es1800_ops.to_stop = 0; |
| 2086 | es1800_ops.to_pid_to_exec_file = NULL; |
| 2087 | es1800_ops.to_core_file_to_sym_file = NULL; |
| 2088 | es1800_ops.to_stratum = core_stratum; |
| 2089 | es1800_ops.DONT_USE = 0; |
| 2090 | es1800_ops.to_has_all_memory = 0; |
| 2091 | es1800_ops.to_has_memory = 1; |
| 2092 | es1800_ops.to_has_stack = 0; |
| 2093 | es1800_ops.to_has_registers = 0; |
| 2094 | es1800_ops.to_has_execution = 0; |
| 2095 | es1800_ops.to_sections = NULL; |
| 2096 | es1800_ops.to_sections_end = NULL; |
| 2097 | es1800_ops.to_magic = OPS_MAGIC; |
| 2098 | } |
| 2099 | |
| 2100 | /* Define the target subroutine names */ |
| 2101 | |
| 2102 | struct target_ops es1800_child_ops; |
| 2103 | |
| 2104 | static void |
| 2105 | init_es1800_child_ops (void) |
| 2106 | { |
| 2107 | es1800_child_ops.to_shortname = "es1800_process"; |
| 2108 | es1800_child_ops.to_longname = "Remote serial target in ES1800-emulator protocol"; |
| 2109 | es1800_child_ops.to_doc = "Remote debugging on the es1800 emulator via a serial line.\n\ |
| 2110 | Specify the serial device it is connected to (e.g. /dev/ttya)."; |
| 2111 | es1800_child_ops.to_open = es1800_child_open; |
| 2112 | es1800_child_ops.to_close = NULL; |
| 2113 | es1800_child_ops.to_attach = es1800_attach; |
| 2114 | es1800_child_ops.to_post_attach = NULL; |
| 2115 | es1800_child_ops.to_require_attach = NULL; |
| 2116 | es1800_child_ops.to_detach = es1800_child_detach; |
| 2117 | es1800_child_ops.to_require_detach = NULL; |
| 2118 | es1800_child_ops.to_resume = es1800_resume; |
| 2119 | es1800_child_ops.to_wait = es1800_wait; |
| 2120 | es1800_child_ops.to_post_wait = NULL; |
| 2121 | es1800_child_ops.to_fetch_registers = es1800_fetch_register; |
| 2122 | es1800_child_ops.to_store_registers = es1800_store_register; |
| 2123 | es1800_child_ops.to_prepare_to_store = es1800_prepare_to_store; |
| 2124 | es1800_child_ops.to_xfer_memory = es1800_xfer_inferior_memory; |
| 2125 | es1800_child_ops.to_files_info = es1800_files_info; |
| 2126 | es1800_child_ops.to_insert_breakpoint = es1800_insert_breakpoint; |
| 2127 | es1800_child_ops.to_remove_breakpoint = es1800_remove_breakpoint; |
| 2128 | es1800_child_ops.to_terminal_init = NULL; |
| 2129 | es1800_child_ops.to_terminal_inferior = NULL; |
| 2130 | es1800_child_ops.to_terminal_ours_for_output = NULL; |
| 2131 | es1800_child_ops.to_terminal_ours = NULL; |
| 2132 | es1800_child_ops.to_terminal_info = NULL; |
| 2133 | es1800_child_ops.to_kill = es1800_kill; |
| 2134 | es1800_child_ops.to_load = es1800_load; |
| 2135 | es1800_child_ops.to_lookup_symbol = NULL; |
| 2136 | es1800_child_ops.to_create_inferior = es1800_create_inferior; |
| 2137 | es1800_child_ops.to_post_startup_inferior = NULL; |
| 2138 | es1800_child_ops.to_acknowledge_created_inferior = NULL; |
| 2139 | es1800_child_ops.to_clone_and_follow_inferior = NULL; |
| 2140 | es1800_child_ops.to_post_follow_inferior_by_clone = NULL; |
| 2141 | es1800_child_ops.to_insert_fork_catchpoint = NULL; |
| 2142 | es1800_child_ops.to_remove_fork_catchpoint = NULL; |
| 2143 | es1800_child_ops.to_insert_vfork_catchpoint = NULL; |
| 2144 | es1800_child_ops.to_remove_vfork_catchpoint = NULL; |
| 2145 | es1800_child_ops.to_has_forked = NULL; |
| 2146 | es1800_child_ops.to_has_vforked = NULL; |
| 2147 | es1800_child_ops.to_can_follow_vfork_prior_to_exec = NULL; |
| 2148 | es1800_child_ops.to_post_follow_vfork = NULL; |
| 2149 | es1800_child_ops.to_insert_exec_catchpoint = NULL; |
| 2150 | es1800_child_ops.to_remove_exec_catchpoint = NULL; |
| 2151 | es1800_child_ops.to_has_execd = NULL; |
| 2152 | es1800_child_ops.to_reported_exec_events_per_exec_call = NULL; |
| 2153 | es1800_child_ops.to_has_exited = NULL; |
| 2154 | es1800_child_ops.to_mourn_inferior = es1800_mourn_inferior; |
| 2155 | es1800_child_ops.to_can_run = 0; |
| 2156 | es1800_child_ops.to_notice_signals = 0; |
| 2157 | es1800_child_ops.to_thread_alive = 0; |
| 2158 | es1800_child_ops.to_stop = 0; |
| 2159 | es1800_child_ops.to_pid_to_exec_file = NULL; |
| 2160 | es1800_child_ops.to_core_file_to_sym_file = NULL; |
| 2161 | es1800_child_ops.to_stratum = process_stratum; |
| 2162 | es1800_child_ops.DONT_USE = 0; |
| 2163 | es1800_child_ops.to_has_all_memory = 1; |
| 2164 | es1800_child_ops.to_has_memory = 1; |
| 2165 | es1800_child_ops.to_has_stack = 1; |
| 2166 | es1800_child_ops.to_has_registers = 1; |
| 2167 | es1800_child_ops.to_has_execution = 1; |
| 2168 | es1800_child_ops.to_sections = NULL; |
| 2169 | es1800_child_ops.to_sections_end = NULL; |
| 2170 | es1800_child_ops.to_magic = OPS_MAGIC; |
| 2171 | } |
| 2172 | |
| 2173 | void |
| 2174 | _initialize_es1800 () |
| 2175 | { |
| 2176 | init_es1800_ops (); |
| 2177 | init_es1800_child_ops (); |
| 2178 | add_target (&es1800_ops); |
| 2179 | add_target (&es1800_child_ops); |
| 2180 | #ifdef PROVIDE_TRANSPARENT |
| 2181 | add_com ("transparent", class_support, es1800_transparent, |
| 2182 | "Start transparent communication with the ES 1800 emulator."); |
| 2183 | #endif /* PROVIDE_TRANSPARENT */ |
| 2184 | add_com ("init_break", class_support, es1800_init_break, |
| 2185 | "Download break routine and initialize break facility on ES 1800"); |
| 2186 | } |