| 1 | /* Remote debugging interface for MONITOR boot monitor, for GDB. |
| 2 | Copyright 1990, 1991, 1992 Free Software Foundation, Inc. |
| 3 | Contributed by Cygnus Support. Written by Rob Savoye for Cygnus. |
| 4 | |
| 5 | This file is part of GDB. |
| 6 | |
| 7 | This program is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 2 of the License, or |
| 10 | (at your option) any later version. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ |
| 20 | |
| 21 | /* This file was derived from remote-eb.c, which did a similar job, but for |
| 22 | an AMD-29K running EBMON. That file was in turn derived from remote.c |
| 23 | as mentioned in the following comment (left in for comic relief): |
| 24 | |
| 25 | "This is like remote.c but is for an esoteric situation-- |
| 26 | having an a29k board in a PC hooked up to a unix machine with |
| 27 | a serial line, and running ctty com1 on the PC, through which |
| 28 | the unix machine can run ebmon. Not to mention that the PC |
| 29 | has PC/NFS, so it can access the same executables that gdb can, |
| 30 | over the net in real time." |
| 31 | |
| 32 | In reality, this module talks to a debug monitor called 'MONITOR', which |
| 33 | We communicate with MONITOR via either a direct serial line, or a TCP |
| 34 | (or possibly TELNET) stream to a terminal multiplexor, |
| 35 | which in turn talks to the target board. |
| 36 | |
| 37 | This is based on remote-st2000.c. I left in the above note here for histerical |
| 38 | reasons. |
| 39 | */ |
| 40 | |
| 41 | #include "defs.h" |
| 42 | #include "gdbcore.h" |
| 43 | #include "target.h" |
| 44 | #include "wait.h" |
| 45 | #include <varargs.h> |
| 46 | #include <signal.h> |
| 47 | #include <string.h> |
| 48 | #include <sys/types.h> |
| 49 | #include "command.h" |
| 50 | #include "serial.h" |
| 51 | #include "monitor.h" |
| 52 | |
| 53 | #ifdef HAVE_TERMIO |
| 54 | # define TERMINAL struct termios |
| 55 | #else |
| 56 | # define TERMINAL struct sgttyb |
| 57 | #endif |
| 58 | |
| 59 | struct monitor_ops *current_monitor; |
| 60 | extern struct target_ops rom68k_ops; /* Forward declaration */ |
| 61 | extern struct target_ops mon68_ops; /* Forward declaration */ |
| 62 | extern struct target_ops bug_ops; /* Forward declaration */ |
| 63 | extern struct monitor_ops rom68k_cmds; /* Forward declaration */ |
| 64 | extern struct monitor_ops mon68_cmds; /* Forward declaration */ |
| 65 | extern struct monitor_ops bug_cmds; /* Forward declaration */ |
| 66 | extern struct cmd_list_element *setlist; |
| 67 | extern struct cmd_list_element *unsetlist; |
| 68 | struct cmd_list_element *showlist; |
| 69 | |
| 70 | static void monitor_close(); |
| 71 | static void monitor_fetch_register(); |
| 72 | static void monitor_store_register(); |
| 73 | static int kiodebug; /* flag set by "set remotedebug" */ |
| 74 | static int hashmark; /* flag set by "set hash" */ |
| 75 | |
| 76 | #define LOG_FILE "monitor.log" |
| 77 | #if defined (LOG_FILE) |
| 78 | FILE *log_file; |
| 79 | #endif |
| 80 | |
| 81 | static int timeout = 24; |
| 82 | |
| 83 | /* Descriptor for I/O to remote machine. Initialize it to -1 so that |
| 84 | monitor_open knows that we don't have a file open when the program |
| 85 | starts. */ |
| 86 | static serial_t monitor_desc; |
| 87 | |
| 88 | /* Send data to monitor. Works just like printf. */ |
| 89 | |
| 90 | static void |
| 91 | printf_monitor(va_alist) |
| 92 | va_dcl |
| 93 | { |
| 94 | va_list args; |
| 95 | char *pattern; |
| 96 | char buf[200]; |
| 97 | int i; |
| 98 | |
| 99 | va_start(args); |
| 100 | |
| 101 | pattern = va_arg(args, char *); |
| 102 | |
| 103 | vsprintf(buf, pattern, args); |
| 104 | |
| 105 | if (SERIAL_WRITE(monitor_desc, buf, strlen(buf))) |
| 106 | fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno)); |
| 107 | } |
| 108 | |
| 109 | /* Read a character from the remote system, doing all the fancy |
| 110 | timeout stuff. */ |
| 111 | static int |
| 112 | readchar(timeout) |
| 113 | int timeout; |
| 114 | { |
| 115 | int c; |
| 116 | |
| 117 | c = SERIAL_READCHAR(monitor_desc, timeout); |
| 118 | |
| 119 | if (kiodebug) |
| 120 | putchar(c & 0x7f); |
| 121 | |
| 122 | #ifdef LOG_FILE |
| 123 | if (isascii (c)) |
| 124 | putc(c & 0x7f, log_file); |
| 125 | #endif |
| 126 | |
| 127 | if (c >= 0) |
| 128 | return c & 0x7f; |
| 129 | |
| 130 | if (c == SERIAL_TIMEOUT) |
| 131 | { |
| 132 | if (timeout == 0) |
| 133 | return c; /* Polls shouldn't generate timeout errors */ |
| 134 | |
| 135 | error("Timeout reading from remote system."); |
| 136 | } |
| 137 | |
| 138 | perror_with_name("remote-monitor"); |
| 139 | } |
| 140 | |
| 141 | /* Scan input from the remote system, until STRING is found. If DISCARD is |
| 142 | non-zero, then discard non-matching input, else print it out. |
| 143 | Let the user break out immediately. */ |
| 144 | static void |
| 145 | expect(string, discard) |
| 146 | char *string; |
| 147 | int discard; |
| 148 | { |
| 149 | char *p = string; |
| 150 | int c; |
| 151 | |
| 152 | if (kiodebug) |
| 153 | printf ("Expecting \"%s\"\n", string); |
| 154 | |
| 155 | immediate_quit = 1; |
| 156 | while (1) |
| 157 | { |
| 158 | c = readchar(timeout); |
| 159 | if (!isascii (c)) |
| 160 | continue; |
| 161 | if (c == *p++) |
| 162 | { |
| 163 | if (*p == '\0') |
| 164 | { |
| 165 | immediate_quit = 0; |
| 166 | if (kiodebug) |
| 167 | printf ("\nMatched\n"); |
| 168 | return; |
| 169 | } |
| 170 | } |
| 171 | else |
| 172 | { |
| 173 | if (!discard) |
| 174 | { |
| 175 | fwrite(string, 1, (p - 1) - string, stdout); |
| 176 | putchar((char)c); |
| 177 | fflush(stdout); |
| 178 | } |
| 179 | p = string; |
| 180 | } |
| 181 | } |
| 182 | } |
| 183 | |
| 184 | /* Keep discarding input until we see the MONITOR prompt. |
| 185 | |
| 186 | The convention for dealing with the prompt is that you |
| 187 | o give your command |
| 188 | o *then* wait for the prompt. |
| 189 | |
| 190 | Thus the last thing that a procedure does with the serial line |
| 191 | will be an expect_prompt(). Exception: monitor_resume does not |
| 192 | wait for the prompt, because the terminal is being handed over |
| 193 | to the inferior. However, the next thing which happens after that |
| 194 | is a monitor_wait which does wait for the prompt. |
| 195 | Note that this includes abnormal exit, e.g. error(). This is |
| 196 | necessary to prevent getting into states from which we can't |
| 197 | recover. */ |
| 198 | static void |
| 199 | expect_prompt(discard) |
| 200 | int discard; |
| 201 | { |
| 202 | #if defined (LOG_FILE) |
| 203 | /* This is a convenient place to do this. The idea is to do it often |
| 204 | enough that we never lose much data if we terminate abnormally. */ |
| 205 | fflush(log_file); |
| 206 | #endif |
| 207 | expect (PROMPT, discard); |
| 208 | } |
| 209 | |
| 210 | /* Get a hex digit from the remote system & return its value. |
| 211 | If ignore_space is nonzero, ignore spaces (not newline, tab, etc). */ |
| 212 | static int |
| 213 | get_hex_digit(ignore_space) |
| 214 | int ignore_space; |
| 215 | { |
| 216 | int ch; |
| 217 | while (1) |
| 218 | { |
| 219 | ch = readchar(timeout); |
| 220 | if (ch >= '0' && ch <= '9') |
| 221 | return ch - '0'; |
| 222 | else if (ch >= 'A' && ch <= 'F') |
| 223 | return ch - 'A' + 10; |
| 224 | else if (ch >= 'a' && ch <= 'f') |
| 225 | return ch - 'a' + 10; |
| 226 | else if (ch == ' ' && ignore_space) |
| 227 | ; |
| 228 | else |
| 229 | { |
| 230 | expect_prompt(1); |
| 231 | error("Invalid hex digit from remote system."); |
| 232 | } |
| 233 | } |
| 234 | } |
| 235 | |
| 236 | /* Get a byte from monitor and put it in *BYT. Accept any number |
| 237 | leading spaces. */ |
| 238 | static void |
| 239 | get_hex_byte (byt) |
| 240 | char *byt; |
| 241 | { |
| 242 | int val; |
| 243 | |
| 244 | val = get_hex_digit (1) << 4; |
| 245 | val |= get_hex_digit (0); |
| 246 | *byt = val; |
| 247 | } |
| 248 | |
| 249 | /* Get N 32-bit words from remote, each preceded by a space, |
| 250 | and put them in registers starting at REGNO. */ |
| 251 | static void |
| 252 | get_hex_regs (n, regno) |
| 253 | int n; |
| 254 | int regno; |
| 255 | { |
| 256 | long val; |
| 257 | int i; |
| 258 | |
| 259 | for (i = 0; i < n; i++) |
| 260 | { |
| 261 | int j; |
| 262 | |
| 263 | val = 0; |
| 264 | for (j = 0; j < 8; j++) |
| 265 | val = (val << 4) + get_hex_digit (j == 0); |
| 266 | supply_register (regno++, (char *) &val); |
| 267 | } |
| 268 | } |
| 269 | |
| 270 | /* This is called not only when we first attach, but also when the |
| 271 | user types "run" after having attached. */ |
| 272 | static void |
| 273 | monitor_create_inferior (execfile, args, env) |
| 274 | char *execfile; |
| 275 | char *args; |
| 276 | char **env; |
| 277 | { |
| 278 | int entry_pt; |
| 279 | |
| 280 | if (args && *args) |
| 281 | error("Can't pass arguments to remote MONITOR process"); |
| 282 | |
| 283 | if (execfile == 0 || exec_bfd == 0) |
| 284 | error("No exec file specified"); |
| 285 | |
| 286 | entry_pt = (int) bfd_get_start_address (exec_bfd); |
| 287 | |
| 288 | #ifdef CREATE_INFERIOR_HOOK |
| 289 | CREATE_INFERIOR_HOOK (0); /* No process-ID */ |
| 290 | #endif |
| 291 | #ifdef LOG_FILE |
| 292 | fputs ("\nIn Create_inferior()", log_file); |
| 293 | #endif |
| 294 | |
| 295 | /* The "process" (board) is already stopped awaiting our commands, and |
| 296 | the program is already downloaded. We just set its PC and go. */ |
| 297 | |
| 298 | clear_proceed_status (); |
| 299 | |
| 300 | /* Tell wait_for_inferior that we've started a new process. */ |
| 301 | init_wait_for_inferior (); |
| 302 | |
| 303 | /* Set up the "saved terminal modes" of the inferior |
| 304 | based on what modes we are starting it with. */ |
| 305 | target_terminal_init (); |
| 306 | |
| 307 | /* Install inferior's terminal modes. */ |
| 308 | target_terminal_inferior (); |
| 309 | |
| 310 | /* insert_step_breakpoint (); FIXME, do we need this? */ |
| 311 | proceed ((CORE_ADDR)entry_pt, -1, 0); /* Let 'er rip... */ |
| 312 | } |
| 313 | |
| 314 | /* Open a connection to a remote debugger. |
| 315 | NAME is the filename used for communication. */ |
| 316 | |
| 317 | static int baudrate = 9600; |
| 318 | static char dev_name[100]; |
| 319 | |
| 320 | static void |
| 321 | general_open(args, name, from_tty) |
| 322 | char *args; |
| 323 | char *name; |
| 324 | int from_tty; |
| 325 | { |
| 326 | if (args == NULL) |
| 327 | error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\ |
| 328 | `target %s HOST-NAME:PORT-NUMBER' to use a network connection.", name, name); |
| 329 | |
| 330 | target_preopen(from_tty); |
| 331 | |
| 332 | monitor_close(0); |
| 333 | |
| 334 | monitor_desc = SERIAL_OPEN(dev_name); |
| 335 | |
| 336 | if (!monitor_desc) |
| 337 | perror_with_name(dev_name); |
| 338 | |
| 339 | /* The baud rate was specified when GDB was started. */ |
| 340 | if (baud_rate) |
| 341 | { |
| 342 | int rate; |
| 343 | |
| 344 | if (sscanf (baud_rate, "%d", &rate) == 1) |
| 345 | if (SERIAL_SETBAUDRATE (monitor_desc, rate)) |
| 346 | { |
| 347 | SERIAL_CLOSE (monitor_desc); |
| 348 | perror_with_name (name); |
| 349 | } |
| 350 | } |
| 351 | |
| 352 | SERIAL_RAW(monitor_desc); |
| 353 | |
| 354 | #if defined (LOG_FILE) |
| 355 | log_file = fopen (LOG_FILE, "w"); |
| 356 | if (log_file == NULL) |
| 357 | perror_with_name (LOG_FILE); |
| 358 | #endif |
| 359 | |
| 360 | /* Hello? Are you there? */ |
| 361 | printf_monitor("\r"); /* CR wakes up monitor */ |
| 362 | |
| 363 | expect_prompt(1); |
| 364 | |
| 365 | if (from_tty) |
| 366 | printf("Remote %s connected to %s\n", target_shortname, |
| 367 | dev_name); |
| 368 | } |
| 369 | |
| 370 | static void |
| 371 | rom68k_open(args, from_tty) |
| 372 | char *args; |
| 373 | int from_tty; |
| 374 | { |
| 375 | push_target(&rom68k_ops); |
| 376 | push_monitor (&rom68k_cmds); |
| 377 | |
| 378 | general_open (args, "rom68k", from_tty); |
| 379 | } |
| 380 | |
| 381 | static void |
| 382 | mon68_open(args, from_tty) |
| 383 | char *args; |
| 384 | int from_tty; |
| 385 | { |
| 386 | push_target(&mon68_ops); |
| 387 | push_monitor (&mon68_cmds); |
| 388 | |
| 389 | general_open (args, "mon68", from_tty); |
| 390 | } |
| 391 | |
| 392 | static void |
| 393 | bug_open(args, from_tty) |
| 394 | char *args; |
| 395 | int from_tty; |
| 396 | { |
| 397 | push_target(&bug_ops); |
| 398 | push_monitor (&bug_cmds); |
| 399 | |
| 400 | general_open (args, "bug", from_tty); |
| 401 | } |
| 402 | |
| 403 | /* |
| 404 | * _close -- Close out all files and local state before this target loses control. |
| 405 | */ |
| 406 | |
| 407 | static void |
| 408 | monitor_close (quitting) |
| 409 | int quitting; |
| 410 | { |
| 411 | SERIAL_CLOSE(monitor_desc); |
| 412 | |
| 413 | #if defined (LOG_FILE) |
| 414 | if (log_file) { |
| 415 | if (ferror(log_file)) |
| 416 | fprintf(stderr, "Error writing log file.\n"); |
| 417 | if (fclose(log_file) != 0) |
| 418 | fprintf(stderr, "Error closing log file.\n"); |
| 419 | } |
| 420 | #endif |
| 421 | } |
| 422 | |
| 423 | /* Terminate the open connection to the remote debugger. |
| 424 | Use this when you want to detach and do something else |
| 425 | with your gdb. */ |
| 426 | static void |
| 427 | monitor_detach (from_tty) |
| 428 | int from_tty; |
| 429 | { |
| 430 | pop_target(); /* calls monitor_close to do the real work */ |
| 431 | if (from_tty) |
| 432 | printf ("Ending remote %s debugging\n", target_shortname); |
| 433 | } |
| 434 | |
| 435 | /* |
| 436 | * _resume -- Tell the remote machine to resume. |
| 437 | */ |
| 438 | static void |
| 439 | monitor_resume (step, sig) |
| 440 | int step, sig; |
| 441 | { |
| 442 | #ifdef LOG_FILE |
| 443 | fprintf (log_file, "\nIn Resume (step=%d, sig=%d)\n", step, sig); |
| 444 | #endif |
| 445 | |
| 446 | if (step) |
| 447 | { |
| 448 | printf_monitor (STEP_CMD); |
| 449 | /* wait for the echo. */ |
| 450 | expect (STEP_CMD, 1); |
| 451 | } |
| 452 | else |
| 453 | { |
| 454 | printf_monitor (GO_CMD); |
| 455 | /* swallow the echo. */ |
| 456 | expect (GO_CMD, 1); |
| 457 | } |
| 458 | } |
| 459 | |
| 460 | /* |
| 461 | * _wait -- Wait until the remote machine stops, then return, |
| 462 | * storing status in status just as `wait' would. |
| 463 | */ |
| 464 | |
| 465 | static int |
| 466 | monitor_wait (status) |
| 467 | WAITTYPE *status; |
| 468 | { |
| 469 | int old_timeout = timeout; |
| 470 | #ifdef LOG_FILE |
| 471 | fputs ("\nIn wait ()", log_file); |
| 472 | #endif |
| 473 | |
| 474 | WSETEXIT ((*status), 0); |
| 475 | |
| 476 | timeout = 0; /* Don't time out -- user program is running. */ |
| 477 | |
| 478 | expect_prompt(0); /* Wait for prompt, outputting extraneous text */ |
| 479 | |
| 480 | WSETSTOP ((*status), SIGTRAP); |
| 481 | |
| 482 | timeout = old_timeout; |
| 483 | |
| 484 | return 0; |
| 485 | } |
| 486 | |
| 487 | /* Return the name of register number regno in the form input and output by |
| 488 | monitor. Currently, register_names just happens to contain exactly what |
| 489 | monitor wants. Lets take advantage of that just as long as possible! */ |
| 490 | |
| 491 | static char * |
| 492 | get_reg_name (regno) |
| 493 | int regno; |
| 494 | { |
| 495 | static char buf[50]; |
| 496 | const char *p; |
| 497 | char *b; |
| 498 | |
| 499 | b = buf; |
| 500 | |
| 501 | if (regno < 0) |
| 502 | return (""); |
| 503 | for (p = reg_names[regno]; *p; p++) |
| 504 | *b++ = toupper(*p); |
| 505 | *b = '\000'; |
| 506 | |
| 507 | return buf; |
| 508 | } |
| 509 | |
| 510 | /* read the remote registers into the block regs. */ |
| 511 | |
| 512 | static void |
| 513 | monitor_fetch_registers () |
| 514 | { |
| 515 | int regno; |
| 516 | |
| 517 | /* yeah yeah, i know this is horribly inefficient. but it isn't done |
| 518 | very often... i'll clean it up later. */ |
| 519 | |
| 520 | for (regno = 0; regno <= PC_REGNUM; regno++) |
| 521 | monitor_fetch_register(regno); |
| 522 | } |
| 523 | |
| 524 | /* Fetch register REGNO, or all registers if REGNO is -1. |
| 525 | Returns errno value. */ |
| 526 | static void |
| 527 | monitor_fetch_register (regno) |
| 528 | int regno; |
| 529 | { |
| 530 | int val, j; |
| 531 | |
| 532 | #ifdef LOG_FILE |
| 533 | fprintf (log_file, "\nIn Fetch Register (reg=%s)\n", get_reg_name (regno)); |
| 534 | fflush (log_file); |
| 535 | #endif |
| 536 | |
| 537 | if (regno < 0) |
| 538 | { |
| 539 | monitor_fetch_registers (); |
| 540 | } |
| 541 | else |
| 542 | { |
| 543 | char *name = get_reg_name (regno); |
| 544 | printf_monitor (GET_REG, name); |
| 545 | expect (name, 1); |
| 546 | expect (REG_DELIM, 1); |
| 547 | if (strcasecmp (name, "SR") == 0) |
| 548 | { |
| 549 | val = 0; |
| 550 | for (j = 0; j < 4; j++) |
| 551 | val = (val << 4) + get_hex_digit (j == 0); |
| 552 | supply_register (regno, (char *) &val); |
| 553 | } |
| 554 | else |
| 555 | { |
| 556 | get_hex_regs (1, regno); |
| 557 | } |
| 558 | if (CMD_END) |
| 559 | { |
| 560 | expect (CMD_DELIM); |
| 561 | printf_monitor (CMD_END); |
| 562 | } |
| 563 | expect_prompt (1); |
| 564 | } |
| 565 | return; |
| 566 | } |
| 567 | |
| 568 | /* Store the remote registers from the contents of the block REGS. */ |
| 569 | |
| 570 | static void |
| 571 | monitor_store_registers () |
| 572 | { |
| 573 | int regno; |
| 574 | |
| 575 | for (regno = 0; regno <= PC_REGNUM; regno++) |
| 576 | monitor_store_register(regno); |
| 577 | |
| 578 | registers_changed (); |
| 579 | } |
| 580 | |
| 581 | /* Store register REGNO, or all if REGNO == 0. |
| 582 | return errno value. */ |
| 583 | static void |
| 584 | monitor_store_register (regno) |
| 585 | int regno; |
| 586 | { |
| 587 | #ifdef LOG_FILE |
| 588 | fprintf (log_file, "\nIn Store_register (regno=%d)\n", regno); |
| 589 | #endif |
| 590 | if (regno == -1) |
| 591 | monitor_store_registers (); |
| 592 | else |
| 593 | { |
| 594 | if (kiodebug) |
| 595 | printf ("Setting register %s to 0x%x\n", get_reg_name (regno), read_register (regno)); |
| 596 | |
| 597 | printf_monitor (SET_REG, get_reg_name (regno), |
| 598 | read_register (regno)); |
| 599 | |
| 600 | expect_prompt (1); |
| 601 | } |
| 602 | } |
| 603 | |
| 604 | /* Get ready to modify the registers array. On machines which store |
| 605 | individual registers, this doesn't need to do anything. On machines |
| 606 | which store all the registers in one fell swoop, this makes sure |
| 607 | that registers contains all the registers from the program being |
| 608 | debugged. */ |
| 609 | |
| 610 | static void |
| 611 | monitor_prepare_to_store () |
| 612 | { |
| 613 | /* Do nothing, since we can store individual regs */ |
| 614 | } |
| 615 | |
| 616 | static void |
| 617 | monitor_files_info () |
| 618 | { |
| 619 | printf ("\tAttached to %s at %d baud.\n", |
| 620 | dev_name, baudrate); |
| 621 | } |
| 622 | |
| 623 | /* Copy LEN bytes of data from debugger memory at MYADDR |
| 624 | to inferior's memory at MEMADDR. Returns length moved. */ |
| 625 | static int |
| 626 | monitor_write_inferior_memory (memaddr, myaddr, len) |
| 627 | CORE_ADDR memaddr; |
| 628 | unsigned char *myaddr; |
| 629 | int len; |
| 630 | { |
| 631 | int i; |
| 632 | char buf[10]; |
| 633 | |
| 634 | #ifdef LOG_FILE |
| 635 | fprintf (log_file, "\nIn Write_inferior_memory (memaddr=%x, len=%d)\n", memaddr, len); |
| 636 | #endif |
| 637 | for (i = 0; i < len; i++) |
| 638 | { |
| 639 | printf_monitor (MEM_SET_CMD, memaddr + i); |
| 640 | expect (sprintf (buf, MEM_PROMPT, memaddr + i), 1); |
| 641 | expect (CMD_DELIM); |
| 642 | printf_monitor ("%x", myaddr[i]); |
| 643 | if (kiodebug) |
| 644 | printf ("\nSet 0x%x to 0x%x\n", memaddr + i, myaddr[i]); |
| 645 | if (CMD_END) |
| 646 | { |
| 647 | /*** expect (sprintf (buf, MEM_PROMPT, memaddr + i +1), 1); |
| 648 | expect (CMD_DELIM); ***/ |
| 649 | printf_monitor (CMD_END); |
| 650 | } |
| 651 | expect_prompt (1); |
| 652 | } |
| 653 | return len; |
| 654 | } |
| 655 | |
| 656 | /* Read LEN bytes from inferior memory at MEMADDR. Put the result |
| 657 | at debugger address MYADDR. Returns length moved. */ |
| 658 | static int |
| 659 | monitor_read_inferior_memory(memaddr, myaddr, len) |
| 660 | CORE_ADDR memaddr; |
| 661 | char *myaddr; |
| 662 | int len; |
| 663 | { |
| 664 | int i, j; |
| 665 | char buf[20]; |
| 666 | |
| 667 | /* Number of bytes read so far. */ |
| 668 | int count; |
| 669 | |
| 670 | /* Starting address of this pass. */ |
| 671 | unsigned long startaddr; |
| 672 | |
| 673 | /* Number of bytes to read in this pass. */ |
| 674 | int len_this_pass; |
| 675 | |
| 676 | #ifdef LOG_FILE |
| 677 | fprintf (log_file, "\nIn Read_inferior_memory (memaddr=%x, len=%d)\n", memaddr, len); |
| 678 | #endif |
| 679 | |
| 680 | /* Note that this code works correctly if startaddr is just less |
| 681 | than UINT_MAX (well, really CORE_ADDR_MAX if there was such a |
| 682 | thing). That is, something like |
| 683 | monitor_read_bytes (CORE_ADDR_MAX - 4, foo, 4) |
| 684 | works--it never adds len To memaddr and gets 0. */ |
| 685 | /* However, something like |
| 686 | monitor_read_bytes (CORE_ADDR_MAX - 3, foo, 4) |
| 687 | doesn't need to work. Detect it and give up if there's an attempt |
| 688 | to do that. */ |
| 689 | if (((memaddr - 1) + len) < memaddr) { |
| 690 | errno = EIO; |
| 691 | return 0; |
| 692 | } |
| 693 | |
| 694 | startaddr = memaddr; |
| 695 | count = 0; |
| 696 | while (count < len) |
| 697 | { |
| 698 | len_this_pass = 16; |
| 699 | if ((startaddr % 16) != 0) |
| 700 | len_this_pass -= startaddr % 16; |
| 701 | if (len_this_pass > (len - count)) |
| 702 | len_this_pass = (len - count); |
| 703 | if (kiodebug) |
| 704 | printf ("\nDisplay %d bytes at %x\n", len_this_pass, startaddr); |
| 705 | |
| 706 | for (i = 0; i < len_this_pass; i++) |
| 707 | { |
| 708 | printf_monitor (MEM_DIS_CMD, startaddr); |
| 709 | expect (sprintf(buf, MEM_PROMPT, startaddr), 1); |
| 710 | get_hex_byte (&myaddr[count++]); |
| 711 | if (kiodebug) |
| 712 | printf ("\nRead a 0x%x from 0x%x\n", myaddr[count-1], startaddr); |
| 713 | if (CMD_END) |
| 714 | { |
| 715 | expect (CMD_DELIM); |
| 716 | printf_monitor (CMD_END); |
| 717 | } |
| 718 | expect_prompt (1); |
| 719 | startaddr += 1; |
| 720 | } |
| 721 | } |
| 722 | return len; |
| 723 | } |
| 724 | |
| 725 | /* FIXME-someday! merge these two. */ |
| 726 | static int |
| 727 | monitor_xfer_inferior_memory (memaddr, myaddr, len, write, target) |
| 728 | CORE_ADDR memaddr; |
| 729 | char *myaddr; |
| 730 | int len; |
| 731 | int write; |
| 732 | struct target_ops *target; /* ignored */ |
| 733 | { |
| 734 | if (write) |
| 735 | return monitor_write_inferior_memory (memaddr, myaddr, len); |
| 736 | else |
| 737 | return monitor_read_inferior_memory (memaddr, myaddr, len); |
| 738 | } |
| 739 | |
| 740 | static void |
| 741 | monitor_kill (args, from_tty) |
| 742 | char *args; |
| 743 | int from_tty; |
| 744 | { |
| 745 | return; /* ignore attempts to kill target system */ |
| 746 | } |
| 747 | |
| 748 | /* Clean up when a program exits. |
| 749 | The program actually lives on in the remote processor's RAM, and may be |
| 750 | run again without a download. Don't leave it full of breakpoint |
| 751 | instructions. */ |
| 752 | |
| 753 | static void |
| 754 | monitor_mourn_inferior () |
| 755 | { |
| 756 | remove_breakpoints (); |
| 757 | generic_mourn_inferior (); /* Do all the proper things now */ |
| 758 | } |
| 759 | |
| 760 | #define MAX_MONITOR_BREAKPOINTS 16 |
| 761 | |
| 762 | extern int memory_breakpoint_size; |
| 763 | static CORE_ADDR breakaddr[MAX_MONITOR_BREAKPOINTS] = {0}; |
| 764 | |
| 765 | static int |
| 766 | monitor_insert_breakpoint (addr, shadow) |
| 767 | CORE_ADDR addr; |
| 768 | char *shadow; |
| 769 | { |
| 770 | int i; |
| 771 | |
| 772 | #ifdef LOG_FILE |
| 773 | fprintf (log_file, "\nIn Insert_breakpoint (addr=%x)\n", addr); |
| 774 | #endif |
| 775 | for (i = 0; i <= MAX_MONITOR_BREAKPOINTS; i++) |
| 776 | if (breakaddr[i] == 0) |
| 777 | { |
| 778 | breakaddr[i] = addr; |
| 779 | if (kiodebug) |
| 780 | printf ("Breakpoint at %x\n", addr); |
| 781 | monitor_read_inferior_memory(addr, shadow, memory_breakpoint_size); |
| 782 | printf_monitor(SET_BREAK_CMD, addr); |
| 783 | expect_prompt(1); |
| 784 | return 0; |
| 785 | } |
| 786 | |
| 787 | fprintf(stderr, "Too many breakpoints (> 16) for monitor\n"); |
| 788 | return 1; |
| 789 | } |
| 790 | |
| 791 | /* |
| 792 | * _remove_breakpoint -- Tell the monitor to remove a breakpoint |
| 793 | */ |
| 794 | static int |
| 795 | monitor_remove_breakpoint (addr, shadow) |
| 796 | CORE_ADDR addr; |
| 797 | char *shadow; |
| 798 | { |
| 799 | int i; |
| 800 | |
| 801 | #ifdef LOG_FILE |
| 802 | fprintf (log_file, "\nIn Remove_breakpoint (addr=%x)\n", addr); |
| 803 | #endif |
| 804 | for (i = 0; i < MAX_MONITOR_BREAKPOINTS; i++) |
| 805 | if (breakaddr[i] == addr) |
| 806 | { |
| 807 | breakaddr[i] = 0; |
| 808 | /* some monitors remove breakpoints based on the address */ |
| 809 | if (strcasecmp (target_shortname, "bug") == 0) |
| 810 | printf_monitor(CLR_BREAK_CMD, addr); |
| 811 | else |
| 812 | printf_monitor(CLR_BREAK_CMD, i); |
| 813 | expect_prompt(1); |
| 814 | return 0; |
| 815 | } |
| 816 | |
| 817 | fprintf(stderr, "Can't find breakpoint associated with 0x%x\n", addr); |
| 818 | return 1; |
| 819 | } |
| 820 | |
| 821 | /* Load a file. This is usually an srecord, which is ascii. No |
| 822 | protocol, just sent line by line. */ |
| 823 | |
| 824 | #define DOWNLOAD_LINE_SIZE 100 |
| 825 | static void |
| 826 | monitor_load (arg) |
| 827 | char *arg; |
| 828 | { |
| 829 | FILE *download; |
| 830 | char buf[DOWNLOAD_LINE_SIZE]; |
| 831 | int i, bytes_read; |
| 832 | |
| 833 | if (kiodebug) |
| 834 | printf ("Loading %s to monitor\n", arg); |
| 835 | |
| 836 | download = fopen (arg, "r"); |
| 837 | if (download == NULL) |
| 838 | { |
| 839 | error (sprintf (buf, "%s Does not exist", arg)); |
| 840 | return; |
| 841 | } |
| 842 | |
| 843 | printf_monitor (LOAD_CMD); |
| 844 | /* expect ("Waiting for S-records from host... ", 1); */ |
| 845 | |
| 846 | while (!feof (download)) |
| 847 | { |
| 848 | bytes_read = fread (buf, sizeof (char), DOWNLOAD_LINE_SIZE, download); |
| 849 | if (hashmark) |
| 850 | { |
| 851 | putchar ('.'); |
| 852 | fflush (stdout); |
| 853 | } |
| 854 | |
| 855 | if (SERIAL_WRITE(monitor_desc, buf, bytes_read)) { |
| 856 | fprintf(stderr, "SERIAL_WRITE failed: (while downloading) %s\n", safe_strerror(errno)); |
| 857 | break; |
| 858 | } |
| 859 | i = 0; |
| 860 | while (i++ <=200000) {} ; /* Ugly HACK, probably needs flow control */ |
| 861 | if (bytes_read < DOWNLOAD_LINE_SIZE) |
| 862 | { |
| 863 | if (!feof (download)) |
| 864 | error ("Only read %d bytes\n", bytes_read); |
| 865 | break; |
| 866 | } |
| 867 | } |
| 868 | |
| 869 | if (hashmark) |
| 870 | { |
| 871 | putchar ('\n'); |
| 872 | } |
| 873 | if (!feof (download)) |
| 874 | error ("Never got EOF while downloading"); |
| 875 | fclose (download); |
| 876 | } |
| 877 | |
| 878 | /* Put a command string, in args, out to MONITOR. Output from MONITOR is placed |
| 879 | on the users terminal until the prompt is seen. */ |
| 880 | |
| 881 | static void |
| 882 | monitor_command (args, fromtty) |
| 883 | char *args; |
| 884 | int fromtty; |
| 885 | { |
| 886 | #ifdef LOG_FILE |
| 887 | fprintf (log_file, "\nIn command (args=%s)\n", args); |
| 888 | #endif |
| 889 | if (monitor_desc < 0) |
| 890 | error("monitor target not open."); |
| 891 | |
| 892 | if (!args) |
| 893 | error("Missing command."); |
| 894 | |
| 895 | printf_monitor("%s\r", args); |
| 896 | expect_prompt(0); |
| 897 | } |
| 898 | |
| 899 | #if 0 |
| 900 | |
| 901 | /* Connect the user directly to MONITOR. This command acts just like the |
| 902 | 'cu' or 'tip' command. Use <CR>~. or <CR>~^D to break out. */ |
| 903 | |
| 904 | static struct ttystate ttystate; |
| 905 | |
| 906 | static void |
| 907 | cleanup_tty() |
| 908 | { printf("\r\n[Exiting connect mode]\r\n"); |
| 909 | /*SERIAL_RESTORE(0, &ttystate);*/ |
| 910 | } |
| 911 | |
| 912 | static void |
| 913 | connect_command (args, fromtty) |
| 914 | char *args; |
| 915 | int fromtty; |
| 916 | { |
| 917 | fd_set readfds; |
| 918 | int numfds; |
| 919 | int c; |
| 920 | char cur_esc = 0; |
| 921 | |
| 922 | dont_repeat(); |
| 923 | |
| 924 | if (monitor_desc < 0) |
| 925 | error("monitor target not open."); |
| 926 | |
| 927 | if (args) |
| 928 | fprintf("This command takes no args. They have been ignored.\n"); |
| 929 | |
| 930 | printf("[Entering connect mode. Use ~. or ~^D to escape]\n"); |
| 931 | |
| 932 | serial_raw(0, &ttystate); |
| 933 | |
| 934 | make_cleanup(cleanup_tty, 0); |
| 935 | |
| 936 | FD_ZERO(&readfds); |
| 937 | |
| 938 | while (1) |
| 939 | { |
| 940 | do |
| 941 | { |
| 942 | FD_SET(0, &readfds); |
| 943 | FD_SET(monitor_desc, &readfds); |
| 944 | numfds = select(sizeof(readfds)*8, &readfds, 0, 0, 0); |
| 945 | } |
| 946 | while (numfds == 0); |
| 947 | |
| 948 | if (numfds < 0) |
| 949 | perror_with_name("select"); |
| 950 | |
| 951 | if (FD_ISSET(0, &readfds)) |
| 952 | { /* tty input, send to monitor */ |
| 953 | c = getchar(); |
| 954 | if (c < 0) |
| 955 | perror_with_name("connect"); |
| 956 | |
| 957 | printf_monitor("%c", c); |
| 958 | switch (cur_esc) |
| 959 | { |
| 960 | case 0: |
| 961 | if (c == '\r') |
| 962 | cur_esc = c; |
| 963 | break; |
| 964 | case '\r': |
| 965 | if (c == '~') |
| 966 | cur_esc = c; |
| 967 | else |
| 968 | cur_esc = 0; |
| 969 | break; |
| 970 | case '~': |
| 971 | if (c == '.' || c == '\004') |
| 972 | return; |
| 973 | else |
| 974 | cur_esc = 0; |
| 975 | } |
| 976 | } |
| 977 | |
| 978 | if (FD_ISSET(monitor_desc, &readfds)) |
| 979 | { |
| 980 | while (1) |
| 981 | { |
| 982 | c = readchar(0); |
| 983 | if (c < 0) |
| 984 | break; |
| 985 | putchar(c); |
| 986 | } |
| 987 | fflush(stdout); |
| 988 | } |
| 989 | } |
| 990 | } |
| 991 | #endif |
| 992 | |
| 993 | /* |
| 994 | * Define the monitor command strings. Since these are passed directly |
| 995 | * through to a printf style function, we need can include formatting |
| 996 | * strings. We also need a CR or LF on the end. |
| 997 | */ |
| 998 | struct monitor_ops rom68k_cmds = { |
| 999 | "go \r", /* execute or usually GO command */ |
| 1000 | "go \r", /* continue command */ |
| 1001 | "st \r", /* single step */ |
| 1002 | "db %x\r", /* set a breakpoint */ |
| 1003 | "cb %x\r", /* clear a breakpoint */ |
| 1004 | "pm %x\r", /* set memory to a value */ |
| 1005 | "pm %x\r", /* display memory */ |
| 1006 | "-%08X ", /* prompt memory commands use */ |
| 1007 | "pr %s %x\r", /* set a register */ |
| 1008 | ": ", /* delimiter between registers */ |
| 1009 | "pr %s\r", /* read a register */ |
| 1010 | "dc \r", /* download command */ |
| 1011 | "ROM68K :->", /* monitor command prompt */ |
| 1012 | "=", /* end-of-command delimitor */ |
| 1013 | ".\r" /* optional command terminator */ |
| 1014 | }; |
| 1015 | |
| 1016 | struct monitor_ops bug_cmds = { |
| 1017 | "go \r", /* execute or usually GO command */ |
| 1018 | "go \r", /* continue command */ |
| 1019 | "gn \r", /* single step */ |
| 1020 | "br %x\r", /* set a breakpoint */ |
| 1021 | "nobr %x\r", /* clear a breakpoint */ |
| 1022 | "mm %x\r", /* set memory to a value */ |
| 1023 | "mm %x\r", /* display memory */ |
| 1024 | "%08X", /* prompt memory commands use */ |
| 1025 | "rs %s %x\r", /* set a register */ |
| 1026 | "=", /* delimiter between registers */ |
| 1027 | "rm %s\r", /* read a register */ |
| 1028 | "lo 0\r", /* download command */ |
| 1029 | "Bug>", /* monitor command prompt */ |
| 1030 | "? ", /* end-of-command delimitor */ |
| 1031 | ".\r" /* optional command terminator */ |
| 1032 | }; |
| 1033 | |
| 1034 | /* Define the target subroutine names */ |
| 1035 | struct monitor_ops mon68_cmds = { |
| 1036 | "", /* execute or usually GO command */ |
| 1037 | "", /* continue command */ |
| 1038 | "", /* single step */ |
| 1039 | "", /* set a breakpoint */ |
| 1040 | "", /* clear a breakpoint */ |
| 1041 | "", /* set memory to a value */ |
| 1042 | "", /* display memory */ |
| 1043 | "", /* set a register */ |
| 1044 | "", /* delimiter between registers */ |
| 1045 | "", /* read a register */ |
| 1046 | "", /* download command */ |
| 1047 | ">", /* monitor command prompt */ |
| 1048 | "", /* end-of-command delimitor */ |
| 1049 | "" /* optional command terminator */ |
| 1050 | }; |
| 1051 | |
| 1052 | struct target_ops rom68k_ops = { |
| 1053 | "rom68k", |
| 1054 | "Integrated System's ROM68K remote debug monitor", |
| 1055 | "Use a remote computer running the ROM68K debug monitor.\n\ |
| 1056 | Specify the serial device it is connected to (e.g. /dev/ttya).", |
| 1057 | rom68k_open, |
| 1058 | monitor_close, |
| 1059 | 0, |
| 1060 | monitor_detach, |
| 1061 | monitor_resume, |
| 1062 | monitor_wait, |
| 1063 | monitor_fetch_register, |
| 1064 | monitor_store_register, |
| 1065 | monitor_prepare_to_store, |
| 1066 | monitor_xfer_inferior_memory, |
| 1067 | monitor_files_info, |
| 1068 | monitor_insert_breakpoint, |
| 1069 | monitor_remove_breakpoint, /* Breakpoints */ |
| 1070 | 0, |
| 1071 | 0, |
| 1072 | 0, |
| 1073 | 0, |
| 1074 | 0, /* Terminal handling */ |
| 1075 | monitor_kill, |
| 1076 | monitor_load, /* load */ |
| 1077 | 0, /* lookup_symbol */ |
| 1078 | monitor_create_inferior, |
| 1079 | monitor_mourn_inferior, |
| 1080 | 0, /* can_run */ |
| 1081 | 0, /* notice_signals */ |
| 1082 | process_stratum, |
| 1083 | 0, /* next */ |
| 1084 | 1, |
| 1085 | 1, |
| 1086 | 1, |
| 1087 | 1, |
| 1088 | 1, /* all mem, mem, stack, regs, exec */ |
| 1089 | 0, |
| 1090 | 0, /* Section pointers */ |
| 1091 | OPS_MAGIC, /* Always the last thing */ |
| 1092 | }; |
| 1093 | |
| 1094 | struct target_ops bug_ops = { |
| 1095 | "bug", |
| 1096 | "Motorola's BUG remote serial debug monitor", |
| 1097 | "Use a remote computer running Motorola's BUG debug monitor.\n\ |
| 1098 | Specify the serial device it is connected to (e.g. /dev/ttya).", |
| 1099 | bug_open, |
| 1100 | monitor_close, |
| 1101 | 0, |
| 1102 | monitor_detach, |
| 1103 | monitor_resume, |
| 1104 | monitor_wait, |
| 1105 | monitor_fetch_register, |
| 1106 | monitor_store_register, |
| 1107 | monitor_prepare_to_store, |
| 1108 | monitor_xfer_inferior_memory, |
| 1109 | monitor_files_info, |
| 1110 | monitor_insert_breakpoint, |
| 1111 | monitor_remove_breakpoint, /* Breakpoints */ |
| 1112 | 0, |
| 1113 | 0, |
| 1114 | 0, |
| 1115 | 0, |
| 1116 | 0, /* Terminal handling */ |
| 1117 | monitor_kill, |
| 1118 | monitor_load, /* load */ |
| 1119 | 0, /* lookup_symbol */ |
| 1120 | monitor_create_inferior, |
| 1121 | monitor_mourn_inferior, |
| 1122 | 0, /* can_run */ |
| 1123 | 0, /* notice_signals */ |
| 1124 | process_stratum, |
| 1125 | 0, /* next */ |
| 1126 | 1, |
| 1127 | 1, |
| 1128 | 1, |
| 1129 | 1, |
| 1130 | 1, /* all mem, mem, stack, regs, exec */ |
| 1131 | 0, |
| 1132 | 0, /* Section pointers */ |
| 1133 | OPS_MAGIC, /* Always the last thing */ |
| 1134 | }; |
| 1135 | |
| 1136 | struct target_ops mon68_ops = { |
| 1137 | "mon68", |
| 1138 | "Intermetric's MON68 remote serial debug monitor", |
| 1139 | "Use a remote computer running the MON68 debug monitor.\n\ |
| 1140 | Specify the serial device it is connected to (e.g. /dev/ttya).", |
| 1141 | mon68_open, |
| 1142 | monitor_close, |
| 1143 | 0, |
| 1144 | monitor_detach, |
| 1145 | monitor_resume, |
| 1146 | monitor_wait, |
| 1147 | monitor_fetch_register, |
| 1148 | monitor_store_register, |
| 1149 | monitor_prepare_to_store, |
| 1150 | monitor_xfer_inferior_memory, |
| 1151 | monitor_files_info, |
| 1152 | monitor_insert_breakpoint, |
| 1153 | monitor_remove_breakpoint, /* Breakpoints */ |
| 1154 | 0, |
| 1155 | 0, |
| 1156 | 0, |
| 1157 | 0, |
| 1158 | 0, /* Terminal handling */ |
| 1159 | monitor_kill, |
| 1160 | monitor_load, /* load */ |
| 1161 | 0, /* lookup_symbol */ |
| 1162 | monitor_create_inferior, |
| 1163 | monitor_mourn_inferior, |
| 1164 | 0, /* can_run */ |
| 1165 | 0, /* notice_signals */ |
| 1166 | process_stratum, |
| 1167 | 0, /* next */ |
| 1168 | 1, |
| 1169 | 1, |
| 1170 | 1, |
| 1171 | 1, |
| 1172 | 1, /* all mem, mem, stack, regs, exec */ |
| 1173 | 0, |
| 1174 | 0, /* Section pointers */ |
| 1175 | OPS_MAGIC, /* Always the last thing */ |
| 1176 | }; |
| 1177 | |
| 1178 | void |
| 1179 | _initialize_remote_monitors () |
| 1180 | { |
| 1181 | add_show_from_set ( |
| 1182 | add_set_cmd ("remotedebug", no_class, var_boolean, |
| 1183 | (char *)&kiodebug, |
| 1184 | "Set debugging of I/O to a serial based Monitor.\n\ |
| 1185 | When enabled, debugging info is displayed.", |
| 1186 | &setlist), |
| 1187 | &showlist); |
| 1188 | add_show_from_set ( |
| 1189 | add_set_cmd ("hash", no_class, var_boolean, |
| 1190 | (char *)&hashmark, |
| 1191 | "Set display of activity while downloading a file.\n\ |
| 1192 | When enabled, a period \'.\' is displayed.", |
| 1193 | &setlist), |
| 1194 | &showlist); |
| 1195 | |
| 1196 | /* generic monitor command */ |
| 1197 | add_com ("monitor <command>", class_obscure, monitor_command, |
| 1198 | "Send a command to the debug monitor."); |
| 1199 | #if 0 |
| 1200 | add_com ("connect", class_obscure, connect_command, |
| 1201 | "Connect the terminal directly up to a serial based command monitor.\n\ |
| 1202 | Use <CR>~. or <CR>~^D to break out."); |
| 1203 | #endif |
| 1204 | |
| 1205 | add_target (&rom68k_ops); |
| 1206 | /* add_target (&mon68_ops); */ |
| 1207 | add_target (&bug_ops); |
| 1208 | } |