| 1 | /* Remote debugging interface for AMD 29k interfaced via UDI, for GDB. |
| 2 | Copyright 1990, 1992, 1995 Free Software Foundation, Inc. |
| 3 | Written by Daniel Mann. Contributed by AMD. |
| 4 | |
| 5 | This file is part of GDB. |
| 6 | |
| 7 | This program is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 2 of the License, or |
| 10 | (at your option) any later version. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ |
| 20 | |
| 21 | /* This is like remote.c but uses the Universal Debug Interface (UDI) to |
| 22 | talk to the target hardware (or simulator). UDI is a TCP/IP based |
| 23 | protocol; for hardware that doesn't run TCP, an interface adapter |
| 24 | daemon talks UDI on one side, and talks to the hardware (typically |
| 25 | over a serial port) on the other side. |
| 26 | |
| 27 | - Originally written by Daniel Mann at AMD for MiniMON and gdb 3.91.6. |
| 28 | - David Wood (wood@lab.ultra.nyu.edu) at New York University adapted this |
| 29 | file to gdb 3.95. I was unable to get this working on sun3os4 |
| 30 | with termio, only with sgtty. |
| 31 | - Daniel Mann at AMD took the 3.95 adaptions above and replaced |
| 32 | MiniMON interface with UDI-p interface. */ |
| 33 | |
| 34 | #include "defs.h" |
| 35 | #include "frame.h" |
| 36 | #include "inferior.h" |
| 37 | #include "wait.h" |
| 38 | #include "value.h" |
| 39 | #include <ctype.h> |
| 40 | #include <fcntl.h> |
| 41 | #include <signal.h> |
| 42 | #include <errno.h> |
| 43 | #include "gdb_string.h" |
| 44 | #include "terminal.h" |
| 45 | #include "target.h" |
| 46 | #include "29k-share/udi/udiproc.h" |
| 47 | #include "gdbcmd.h" |
| 48 | #include "bfd.h" |
| 49 | #include "gdbcore.h" /* For download function */ |
| 50 | |
| 51 | /* access the register store directly, without going through |
| 52 | the normal handler functions. This avoids an extra data copy. */ |
| 53 | |
| 54 | extern int stop_soon_quietly; /* for wait_for_inferior */ |
| 55 | extern struct value *call_function_by_hand(); |
| 56 | static void udi_resume PARAMS ((int pid, int step, enum target_signal sig)); |
| 57 | static void udi_fetch_registers PARAMS ((int regno)); |
| 58 | static void udi_load PARAMS ((char *args, int from_tty)); |
| 59 | static void fetch_register PARAMS ((int regno)); |
| 60 | static void udi_store_registers PARAMS ((int regno)); |
| 61 | static int store_register PARAMS ((int regno)); |
| 62 | static int regnum_to_srnum PARAMS ((int regno)); |
| 63 | static void udi_close PARAMS ((int quitting)); |
| 64 | static CPUSpace udi_memory_space PARAMS ((CORE_ADDR addr)); |
| 65 | static int udi_write_inferior_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, |
| 66 | int len)); |
| 67 | static int udi_read_inferior_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, |
| 68 | int len)); |
| 69 | static void download PARAMS ((char *load_arg_string, int from_tty)); |
| 70 | char CoffFileName[100] = ""; |
| 71 | |
| 72 | #define FREEZE_MODE (read_register(CPS_REGNUM) & 0x400) |
| 73 | #define USE_SHADOW_PC ((processor_type == a29k_freeze_mode) && FREEZE_MODE) |
| 74 | |
| 75 | static int timeout = 5; |
| 76 | extern struct target_ops udi_ops; /* Forward declaration */ |
| 77 | |
| 78 | /* Special register enumeration. |
| 79 | */ |
| 80 | |
| 81 | /******************************************************************* UDI DATA*/ |
| 82 | #define MAXDATA 2*1024 /* max UDI[read/write] byte size */ |
| 83 | /* Descriptor for I/O to remote machine. Initialize it to -1 so that |
| 84 | udi_open knows that we don't have a file open when the program |
| 85 | starts. */ |
| 86 | |
| 87 | UDISessionId udi_session_id = -1; |
| 88 | static char *udi_config_id; |
| 89 | |
| 90 | CPUOffset IMemStart = 0; |
| 91 | CPUSizeT IMemSize = 0; |
| 92 | CPUOffset DMemStart = 0; |
| 93 | CPUSizeT DMemSize = 0; |
| 94 | CPUOffset RMemStart = 0; |
| 95 | CPUSizeT RMemSize = 0; |
| 96 | UDIUInt32 CPUPRL; |
| 97 | UDIUInt32 CoProcPRL; |
| 98 | |
| 99 | UDIMemoryRange address_ranges[2]; /* Text and data */ |
| 100 | UDIResource entry = {0, 0}; /* Entry point */ |
| 101 | CPUSizeT stack_sizes[2]; /* Regular and memory stacks */ |
| 102 | |
| 103 | #define SBUF_MAX 1024 /* maximum size of string handling buffer */ |
| 104 | char sbuf[SBUF_MAX]; |
| 105 | |
| 106 | typedef struct bkpt_entry_str |
| 107 | { |
| 108 | UDIResource Addr; |
| 109 | UDIUInt32 PassCount; |
| 110 | UDIBreakType Type; |
| 111 | unsigned int BreakId; |
| 112 | } bkpt_entry_t; |
| 113 | #define BKPT_TABLE_SIZE 40 |
| 114 | static bkpt_entry_t bkpt_table[BKPT_TABLE_SIZE]; |
| 115 | extern char dfe_errmsg[]; /* error string */ |
| 116 | |
| 117 | /* malloc'd name of the program on the remote system. */ |
| 118 | static char *prog_name = NULL; |
| 119 | |
| 120 | /* This is called not only when we first attach, but also when the |
| 121 | user types "run" after having attached. */ |
| 122 | |
| 123 | static void |
| 124 | udi_create_inferior (execfile, args, env) |
| 125 | char *execfile; |
| 126 | char *args; |
| 127 | char **env; |
| 128 | { |
| 129 | char *args1; |
| 130 | |
| 131 | if (execfile) |
| 132 | { |
| 133 | if (prog_name != NULL) |
| 134 | free (prog_name); |
| 135 | prog_name = savestring (execfile, strlen (execfile)); |
| 136 | } |
| 137 | else if (entry.Offset) |
| 138 | execfile = ""; |
| 139 | else |
| 140 | error ("No image loaded into target."); |
| 141 | |
| 142 | if (udi_session_id < 0) |
| 143 | { |
| 144 | /* If the TIP is not open, open it. */ |
| 145 | if (UDIConnect (udi_config_id, &udi_session_id)) |
| 146 | error("UDIConnect() failed: %s\n", dfe_errmsg); |
| 147 | /* We will need to download the program. */ |
| 148 | entry.Offset = 0; |
| 149 | } |
| 150 | |
| 151 | inferior_pid = 40000; |
| 152 | |
| 153 | if (!entry.Offset) |
| 154 | download(execfile, 0); |
| 155 | |
| 156 | args1 = alloca (strlen(execfile) + strlen(args) + 2); |
| 157 | |
| 158 | if (execfile[0] == '\0') |
| 159 | |
| 160 | /* It is empty. We need to quote it somehow, or else the target |
| 161 | will think there is no argument being passed here. According |
| 162 | to the UDI spec it is quoted "according to TIP OS rules" which |
| 163 | I guess means quoting it like the Unix shell should work |
| 164 | (sounds pretty bogus to me...). In fact it doesn't work (with |
| 165 | isstip anyway), but passing in two quotes as the argument seems |
| 166 | like a reasonable enough behavior anyway (I guess). */ |
| 167 | |
| 168 | strcpy (args1, "''"); |
| 169 | else |
| 170 | strcpy (args1, execfile); |
| 171 | strcat (args1, " "); |
| 172 | strcat (args1, args); |
| 173 | |
| 174 | UDIInitializeProcess (address_ranges, /* ProcessMemory[] */ |
| 175 | (UDIInt)2, /* NumberOfRanges */ |
| 176 | entry, /* EntryPoint */ |
| 177 | stack_sizes, /* *StackSizes */ |
| 178 | (UDIInt)2, /* NumberOfStacks */ |
| 179 | args1); /* ArgString */ |
| 180 | |
| 181 | init_wait_for_inferior (); |
| 182 | clear_proceed_status (); |
| 183 | proceed (-1, TARGET_SIGNAL_DEFAULT, 0); |
| 184 | } |
| 185 | |
| 186 | static void |
| 187 | udi_mourn() |
| 188 | { |
| 189 | #if 0 |
| 190 | /* Requiring "target udi" each time you run is a major pain. I suspect |
| 191 | this was just blindy copied from remote.c, in which "target" and |
| 192 | "run" are combined. Having a udi target without an inferior seems |
| 193 | to work between "target udi" and "run", so why not now? */ |
| 194 | pop_target (); /* Pop back to no-child state */ |
| 195 | #endif |
| 196 | /* But if we're going to want to run it again, we better remove the |
| 197 | breakpoints... */ |
| 198 | remove_breakpoints (); |
| 199 | generic_mourn_inferior (); |
| 200 | } |
| 201 | |
| 202 | /******************************************************************** UDI_OPEN |
| 203 | ** Open a connection to remote TIP. |
| 204 | NAME is the socket domain used for communication with the TIP, |
| 205 | then a space and the socket name or TIP-host name. |
| 206 | '<udi_udi_config_id>' for example. |
| 207 | */ |
| 208 | |
| 209 | /* XXX - need cleanups for udiconnect for various failures!!! */ |
| 210 | |
| 211 | static void |
| 212 | udi_open (name, from_tty) |
| 213 | char *name; |
| 214 | int from_tty; |
| 215 | { |
| 216 | unsigned int prl; |
| 217 | char *p; |
| 218 | int cnt; |
| 219 | UDIMemoryRange KnownMemory[10]; |
| 220 | UDIUInt32 ChipVersions[10]; |
| 221 | UDIInt NumberOfRanges = 10; |
| 222 | UDIInt NumberOfChips = 10; |
| 223 | UDIPId PId; |
| 224 | UDIUInt32 TIPId, TargetId, DFEId, DFE, TIP, DFEIPCId, TIPIPCId; |
| 225 | |
| 226 | target_preopen(from_tty); |
| 227 | |
| 228 | entry.Offset = 0; |
| 229 | |
| 230 | for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++) |
| 231 | bkpt_table[cnt].Type = 0; |
| 232 | |
| 233 | if (udi_config_id) |
| 234 | free (udi_config_id); |
| 235 | |
| 236 | if (!name) |
| 237 | error("Usage: target udi config_id, where config_id appears in udi_soc file"); |
| 238 | |
| 239 | udi_config_id = strdup (strtok (name, " \t")); |
| 240 | |
| 241 | if (UDIConnect (udi_config_id, &udi_session_id)) |
| 242 | /* FIXME: Should set udi_session_id to -1 here. */ |
| 243 | error("UDIConnect() failed: %s\n", dfe_errmsg); |
| 244 | |
| 245 | push_target (&udi_ops); |
| 246 | |
| 247 | /* |
| 248 | ** Initialize target configuration structure (global) |
| 249 | */ |
| 250 | if (UDIGetTargetConfig (KnownMemory, &NumberOfRanges, |
| 251 | ChipVersions, &NumberOfChips)) |
| 252 | error ("UDIGetTargetConfig() failed"); |
| 253 | if (NumberOfChips > 2) |
| 254 | fprintf_unfiltered(gdb_stderr,"Target has more than one processor\n"); |
| 255 | for (cnt=0; cnt < NumberOfRanges; cnt++) |
| 256 | { |
| 257 | switch(KnownMemory[cnt].Space) |
| 258 | { |
| 259 | default: |
| 260 | fprintf_unfiltered(gdb_stderr, "UDIGetTargetConfig() unknown memory space\n"); |
| 261 | break; |
| 262 | case UDI29KCP_S: |
| 263 | break; |
| 264 | case UDI29KIROMSpace: |
| 265 | RMemStart = KnownMemory[cnt].Offset; |
| 266 | RMemSize = KnownMemory[cnt].Size; |
| 267 | break; |
| 268 | case UDI29KIRAMSpace: |
| 269 | IMemStart = KnownMemory[cnt].Offset; |
| 270 | IMemSize = KnownMemory[cnt].Size; |
| 271 | break; |
| 272 | case UDI29KDRAMSpace: |
| 273 | DMemStart = KnownMemory[cnt].Offset; |
| 274 | DMemSize = KnownMemory[cnt].Size; |
| 275 | break; |
| 276 | } |
| 277 | } |
| 278 | |
| 279 | a29k_get_processor_type (); |
| 280 | |
| 281 | if (UDICreateProcess (&PId)) |
| 282 | fprintf_unfiltered(gdb_stderr, "UDICreateProcess() failed\n"); |
| 283 | |
| 284 | /* Print out some stuff, letting the user now what's going on */ |
| 285 | if (UDICapabilities (&TIPId, &TargetId, DFEId, DFE, &TIP, &DFEIPCId, |
| 286 | &TIPIPCId, sbuf)) |
| 287 | error ("UDICapabilities() failed"); |
| 288 | if (from_tty) |
| 289 | { |
| 290 | printf_filtered ("Connected via UDI socket,\n\ |
| 291 | DFE-IPC version %x.%x.%x TIP-IPC version %x.%x.%x TIP version %x.%x.%x\n %s\n", |
| 292 | (DFEIPCId>>8)&0xf, (DFEIPCId>>4)&0xf, DFEIPCId&0xf, |
| 293 | (TIPIPCId>>8)&0xf, (TIPIPCId>>4)&0xf, TIPIPCId&0xf, |
| 294 | (TargetId>>8)&0xf, (TargetId>>4)&0xf, TargetId&0xf, |
| 295 | sbuf); |
| 296 | } |
| 297 | } |
| 298 | |
| 299 | /******************************************************************* UDI_CLOSE |
| 300 | Close the open connection to the TIP process. |
| 301 | Use this when you want to detach and do something else |
| 302 | with your gdb. */ |
| 303 | static void |
| 304 | udi_close (quitting) /*FIXME: how is quitting used */ |
| 305 | int quitting; |
| 306 | { |
| 307 | if (udi_session_id < 0) |
| 308 | return; |
| 309 | |
| 310 | /* We should never get here if there isn't something valid in |
| 311 | udi_session_id. */ |
| 312 | |
| 313 | if (UDIDisconnect (udi_session_id, UDITerminateSession)) |
| 314 | { |
| 315 | if (quitting) |
| 316 | warning ("UDIDisconnect() failed in udi_close"); |
| 317 | else |
| 318 | error ("UDIDisconnect() failed in udi_close"); |
| 319 | } |
| 320 | |
| 321 | /* Do not try to close udi_session_id again, later in the program. */ |
| 322 | udi_session_id = -1; |
| 323 | inferior_pid = 0; |
| 324 | |
| 325 | printf_filtered (" Ending remote debugging\n"); |
| 326 | } |
| 327 | |
| 328 | /**************************************************************** UDI_ATACH */ |
| 329 | /* Attach to a program that is already loaded and running |
| 330 | * Upon exiting the process's execution is stopped. |
| 331 | */ |
| 332 | static void |
| 333 | udi_attach (args, from_tty) |
| 334 | char *args; |
| 335 | int from_tty; |
| 336 | { |
| 337 | UDIResource From; |
| 338 | UDIInt32 PC_adds; |
| 339 | UDICount Count = 1; |
| 340 | UDISizeT Size = 4; |
| 341 | UDICount CountDone; |
| 342 | UDIBool HostEndian = 0; |
| 343 | UDIError err; |
| 344 | |
| 345 | if (args == NULL) |
| 346 | error_no_arg ("program to attach"); |
| 347 | |
| 348 | if (udi_session_id < 0) |
| 349 | error ("UDI connection not opened yet, use the 'target udi' command.\n"); |
| 350 | |
| 351 | if (from_tty) |
| 352 | printf_unfiltered ("Attaching to remote program %s...\n", prog_name); |
| 353 | |
| 354 | UDIStop(); |
| 355 | From.Space = UDI29KSpecialRegs; |
| 356 | From.Offset = 11; |
| 357 | if (err = UDIRead(From, &PC_adds, Count, Size, &CountDone, HostEndian)) |
| 358 | error ("UDIRead failed in udi_attach"); |
| 359 | printf_unfiltered ("Remote process is now halted, pc1 = 0x%x.\n", PC_adds); |
| 360 | } |
| 361 | /************************************************************* UDI_DETACH */ |
| 362 | /* Terminate the open connection to the TIP process. |
| 363 | Use this when you want to detach and do something else |
| 364 | with your gdb. Leave remote process running (with no breakpoints set). */ |
| 365 | static void |
| 366 | udi_detach (args,from_tty) |
| 367 | char *args; |
| 368 | int from_tty; |
| 369 | { |
| 370 | |
| 371 | remove_breakpoints(); /* Just in case there were any left in */ |
| 372 | |
| 373 | if (UDIDisconnect (udi_session_id, UDIContinueSession)) |
| 374 | error ("UDIDisconnect() failed in udi_detach"); |
| 375 | |
| 376 | /* Don't try to UDIDisconnect it again in udi_close, which is called from |
| 377 | pop_target. */ |
| 378 | udi_session_id = -1; |
| 379 | inferior_pid = 0; |
| 380 | |
| 381 | pop_target(); |
| 382 | |
| 383 | if (from_tty) |
| 384 | printf_unfiltered ("Detaching from TIP\n"); |
| 385 | } |
| 386 | |
| 387 | |
| 388 | /****************************************************************** UDI_RESUME |
| 389 | ** Tell the remote machine to resume. */ |
| 390 | |
| 391 | static void |
| 392 | udi_resume (pid, step, sig) |
| 393 | int pid, step; |
| 394 | enum target_signal sig; |
| 395 | { |
| 396 | UDIError tip_error; |
| 397 | UDIUInt32 Steps = 1; |
| 398 | UDIStepType StepType = UDIStepNatural; |
| 399 | UDIRange Range; |
| 400 | |
| 401 | if (step) /* step 1 instruction */ |
| 402 | { |
| 403 | tip_error = UDIStep (Steps, StepType, Range); |
| 404 | if (!tip_error) |
| 405 | return; |
| 406 | |
| 407 | fprintf_unfiltered (gdb_stderr, "UDIStep() error = %d\n", tip_error); |
| 408 | error ("failed in udi_resume"); |
| 409 | } |
| 410 | |
| 411 | if (UDIExecute()) |
| 412 | error ("UDIExecute() failed in udi_resume"); |
| 413 | } |
| 414 | |
| 415 | /******************************************************************** UDI_WAIT |
| 416 | ** Wait until the remote machine stops, then return, |
| 417 | storing status in STATUS just as `wait' would. */ |
| 418 | |
| 419 | static int |
| 420 | udi_wait (pid, status) |
| 421 | int pid; |
| 422 | struct target_waitstatus *status; |
| 423 | { |
| 424 | UDIInt32 MaxTime; |
| 425 | UDIPId PId; |
| 426 | UDIInt32 StopReason; |
| 427 | UDISizeT CountDone; |
| 428 | int old_timeout = timeout; |
| 429 | int old_immediate_quit = immediate_quit; |
| 430 | int i; |
| 431 | |
| 432 | status->kind = TARGET_WAITKIND_EXITED; |
| 433 | status->value.integer = 0; |
| 434 | |
| 435 | /* wait for message to arrive. It should be: |
| 436 | If the target stops executing, udi_wait() should return. |
| 437 | */ |
| 438 | timeout = 0; /* Wait indefinetly for a message */ |
| 439 | immediate_quit = 1; /* Helps ability to QUIT */ |
| 440 | |
| 441 | while(1) |
| 442 | { |
| 443 | i = 0; |
| 444 | MaxTime = UDIWaitForever; |
| 445 | UDIWait(MaxTime, &PId, &StopReason); |
| 446 | QUIT; /* Let user quit if they want */ |
| 447 | |
| 448 | switch (StopReason & UDIGrossState) |
| 449 | { |
| 450 | case UDIStdoutReady: |
| 451 | if (UDIGetStdout (sbuf, (UDISizeT)SBUF_MAX, &CountDone)) |
| 452 | /* This is said to happen if the program tries to output |
| 453 | a whole bunch of output (more than SBUF_MAX, I would |
| 454 | guess). It doesn't seem to happen with the simulator. */ |
| 455 | warning ("UDIGetStdout() failed in udi_wait"); |
| 456 | fwrite (sbuf, 1, CountDone, gdb_stdout); |
| 457 | gdb_flush(gdb_stdout); |
| 458 | continue; |
| 459 | |
| 460 | case UDIStderrReady: |
| 461 | UDIGetStderr (sbuf, (UDISizeT)SBUF_MAX, &CountDone); |
| 462 | fwrite (sbuf, 1, CountDone, gdb_stderr); |
| 463 | gdb_flush(gdb_stderr); |
| 464 | continue; |
| 465 | |
| 466 | case UDIStdinNeeded: |
| 467 | { |
| 468 | int ch; |
| 469 | i = 0; |
| 470 | do |
| 471 | { |
| 472 | ch = getchar (); |
| 473 | if (ch == EOF) |
| 474 | break; |
| 475 | sbuf[i++] = ch; |
| 476 | } while (i < SBUF_MAX && ch != '\n'); |
| 477 | UDIPutStdin (sbuf, (UDISizeT)i, &CountDone); |
| 478 | continue; |
| 479 | } |
| 480 | |
| 481 | case UDIRunning: |
| 482 | /* In spite of the fact that we told UDIWait to wait forever, it will |
| 483 | return spuriously sometimes. */ |
| 484 | case UDIStdinModeX: |
| 485 | continue; |
| 486 | default: |
| 487 | break; |
| 488 | } |
| 489 | break; |
| 490 | } |
| 491 | |
| 492 | switch (StopReason & UDIGrossState) |
| 493 | { |
| 494 | case UDITrapped: |
| 495 | printf_unfiltered("Am290*0 received vector number %d\n", StopReason >> 24); |
| 496 | |
| 497 | switch ((StopReason >> 8 ) & 0xff) |
| 498 | { |
| 499 | case 0: /* Illegal opcode */ |
| 500 | printf_unfiltered(" (break point)\n"); |
| 501 | status->kind = TARGET_WAITKIND_STOPPED; |
| 502 | status->value.sig = TARGET_SIGNAL_TRAP; |
| 503 | break; |
| 504 | case 1: /* Unaligned Access */ |
| 505 | status->kind = TARGET_WAITKIND_STOPPED; |
| 506 | status->value.sig = TARGET_SIGNAL_BUS; |
| 507 | break; |
| 508 | case 3: |
| 509 | case 4: |
| 510 | status->kind = TARGET_WAITKIND_STOPPED; |
| 511 | status->value.sig = TARGET_SIGNAL_FPE; |
| 512 | break; |
| 513 | case 5: /* Protection Violation */ |
| 514 | status->kind = TARGET_WAITKIND_STOPPED; |
| 515 | /* Why not SEGV? What is a Protection Violation? */ |
| 516 | status->value.sig = TARGET_SIGNAL_ILL; |
| 517 | break; |
| 518 | case 6: |
| 519 | case 7: |
| 520 | case 8: /* User Instruction Mapping Miss */ |
| 521 | case 9: /* User Data Mapping Miss */ |
| 522 | case 10: /* Supervisor Instruction Mapping Miss */ |
| 523 | case 11: /* Supervisor Data Mapping Miss */ |
| 524 | status->kind = TARGET_WAITKIND_STOPPED; |
| 525 | status->value.sig = TARGET_SIGNAL_SEGV; |
| 526 | break; |
| 527 | case 12: |
| 528 | case 13: |
| 529 | status->kind = TARGET_WAITKIND_STOPPED; |
| 530 | status->value.sig = TARGET_SIGNAL_ILL; |
| 531 | break; |
| 532 | case 14: /* Timer */ |
| 533 | status->kind = TARGET_WAITKIND_STOPPED; |
| 534 | status->value.sig = TARGET_SIGNAL_ALRM; |
| 535 | break; |
| 536 | case 15: /* Trace */ |
| 537 | status->kind = TARGET_WAITKIND_STOPPED; |
| 538 | status->value.sig = TARGET_SIGNAL_TRAP; |
| 539 | break; |
| 540 | case 16: /* INTR0 */ |
| 541 | case 17: /* INTR1 */ |
| 542 | case 18: /* INTR2 */ |
| 543 | case 19: /* INTR3/Internal */ |
| 544 | case 20: /* TRAP0 */ |
| 545 | case 21: /* TRAP1 */ |
| 546 | status->kind = TARGET_WAITKIND_STOPPED; |
| 547 | status->value.sig = TARGET_SIGNAL_INT; |
| 548 | break; |
| 549 | case 22: /* Floating-Point Exception */ |
| 550 | status->kind = TARGET_WAITKIND_STOPPED; |
| 551 | /* Why not FPE? */ |
| 552 | status->value.sig = TARGET_SIGNAL_ILL; |
| 553 | break; |
| 554 | case 77: /* assert 77 */ |
| 555 | status->kind = TARGET_WAITKIND_STOPPED; |
| 556 | status->value.sig = TARGET_SIGNAL_TRAP; |
| 557 | break; |
| 558 | default: |
| 559 | status->kind = TARGET_WAITKIND_EXITED; |
| 560 | status->value.integer = 0; |
| 561 | } |
| 562 | break; |
| 563 | case UDINotExecuting: |
| 564 | status->kind = TARGET_WAITKIND_STOPPED; |
| 565 | status->value.sig = TARGET_SIGNAL_TERM; |
| 566 | break; |
| 567 | case UDIStopped: |
| 568 | status->kind = TARGET_WAITKIND_STOPPED; |
| 569 | status->value.sig = TARGET_SIGNAL_TSTP; |
| 570 | break; |
| 571 | case UDIWarned: |
| 572 | status->kind = TARGET_WAITKIND_STOPPED; |
| 573 | status->value.sig = TARGET_SIGNAL_URG; |
| 574 | break; |
| 575 | case UDIStepped: |
| 576 | case UDIBreak: |
| 577 | status->kind = TARGET_WAITKIND_STOPPED; |
| 578 | status->value.sig = TARGET_SIGNAL_TRAP; |
| 579 | break; |
| 580 | case UDIWaiting: |
| 581 | status->kind = TARGET_WAITKIND_STOPPED; |
| 582 | status->value.sig = TARGET_SIGNAL_STOP; |
| 583 | break; |
| 584 | case UDIHalted: |
| 585 | status->kind = TARGET_WAITKIND_STOPPED; |
| 586 | status->value.sig = TARGET_SIGNAL_KILL; |
| 587 | break; |
| 588 | case UDIExited: |
| 589 | default: |
| 590 | status->kind = TARGET_WAITKIND_EXITED; |
| 591 | status->value.integer = 0; |
| 592 | } |
| 593 | |
| 594 | timeout = old_timeout; /* Restore original timeout value */ |
| 595 | immediate_quit = old_immediate_quit; |
| 596 | return inferior_pid; |
| 597 | } |
| 598 | |
| 599 | #if 0 |
| 600 | /* Handy for debugging */ |
| 601 | udi_pc() |
| 602 | { |
| 603 | UDIResource From; |
| 604 | UDIUInt32 *To; |
| 605 | UDICount Count; |
| 606 | UDISizeT Size = 4; |
| 607 | UDICount CountDone; |
| 608 | UDIBool HostEndian = 0; |
| 609 | UDIError err; |
| 610 | int pc[2]; |
| 611 | unsigned long myregs[256]; |
| 612 | int i; |
| 613 | |
| 614 | From.Space = UDI29KPC; |
| 615 | From.Offset = 0; |
| 616 | To = (UDIUInt32 *)pc; |
| 617 | Count = 2; |
| 618 | |
| 619 | err = UDIRead(From, To, Count, Size, &CountDone, HostEndian); |
| 620 | |
| 621 | printf_unfiltered ("err = %d, CountDone = %d, pc[0] = 0x%x, pc[1] = 0x%x\n", |
| 622 | err, CountDone, pc[0], pc[1]); |
| 623 | |
| 624 | udi_fetch_registers(-1); |
| 625 | |
| 626 | printf_unfiltered("other pc1 = 0x%x, pc0 = 0x%x\n", *(int *)®isters[4 * PC_REGNUM], |
| 627 | *(int *)®isters[4 * NPC_REGNUM]); |
| 628 | |
| 629 | /* Now, read all the registers globally */ |
| 630 | |
| 631 | From.Space = UDI29KGlobalRegs; |
| 632 | From.Offset = 0; |
| 633 | err = UDIRead(From, myregs, 256, 4, &CountDone, HostEndian); |
| 634 | |
| 635 | printf ("err = %d, CountDone = %d\n", err, CountDone); |
| 636 | |
| 637 | printf("\n"); |
| 638 | |
| 639 | for (i = 0; i < 256; i += 2) |
| 640 | printf("%d:\t%#10x\t%11d\t%#10x\t%11d\n", i, myregs[i], myregs[i], |
| 641 | myregs[i+1], myregs[i+1]); |
| 642 | printf("\n"); |
| 643 | |
| 644 | return pc[0]; |
| 645 | } |
| 646 | #endif |
| 647 | |
| 648 | /********************************************************** UDI_FETCH_REGISTERS |
| 649 | * Read a remote register 'regno'. |
| 650 | * If regno==-1 then read all the registers. |
| 651 | */ |
| 652 | static void |
| 653 | udi_fetch_registers (regno) |
| 654 | int regno; |
| 655 | { |
| 656 | UDIResource From; |
| 657 | UDIUInt32 *To; |
| 658 | UDICount Count; |
| 659 | UDISizeT Size = 4; |
| 660 | UDICount CountDone; |
| 661 | UDIBool HostEndian = 0; |
| 662 | UDIError err; |
| 663 | int i; |
| 664 | |
| 665 | if (regno >= 0) { |
| 666 | fetch_register(regno); |
| 667 | return; |
| 668 | } |
| 669 | |
| 670 | /* Gr1/rsp */ |
| 671 | |
| 672 | From.Space = UDI29KGlobalRegs; |
| 673 | From.Offset = 1; |
| 674 | To = (UDIUInt32 *)®isters[4 * GR1_REGNUM]; |
| 675 | Count = 1; |
| 676 | if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian)) |
| 677 | error("UDIRead() failed in udi_fetch_registers"); |
| 678 | |
| 679 | register_valid[GR1_REGNUM] = 1; |
| 680 | |
| 681 | #if defined(GR64_REGNUM) /* Read gr64-127 */ |
| 682 | |
| 683 | /* Global Registers gr64-gr95 */ |
| 684 | |
| 685 | From.Space = UDI29KGlobalRegs; |
| 686 | From.Offset = 64; |
| 687 | To = (UDIUInt32 *)®isters[4 * GR64_REGNUM]; |
| 688 | Count = 32; |
| 689 | if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian)) |
| 690 | error("UDIRead() failed in udi_fetch_registers"); |
| 691 | |
| 692 | for (i = GR64_REGNUM; i < GR64_REGNUM + 32; i++) |
| 693 | register_valid[i] = 1; |
| 694 | |
| 695 | #endif /* GR64_REGNUM */ |
| 696 | |
| 697 | /* Global Registers gr96-gr127 */ |
| 698 | |
| 699 | From.Space = UDI29KGlobalRegs; |
| 700 | From.Offset = 96; |
| 701 | To = (UDIUInt32 *)®isters[4 * GR96_REGNUM]; |
| 702 | Count = 32; |
| 703 | if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian)) |
| 704 | error("UDIRead() failed in udi_fetch_registers"); |
| 705 | |
| 706 | for (i = GR96_REGNUM; i < GR96_REGNUM + 32; i++) |
| 707 | register_valid[i] = 1; |
| 708 | |
| 709 | /* Local Registers */ |
| 710 | |
| 711 | From.Space = UDI29KLocalRegs; |
| 712 | From.Offset = 0; |
| 713 | To = (UDIUInt32 *)®isters[4 * LR0_REGNUM]; |
| 714 | Count = 128; |
| 715 | if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian)) |
| 716 | error("UDIRead() failed in udi_fetch_registers"); |
| 717 | |
| 718 | for (i = LR0_REGNUM; i < LR0_REGNUM + 128; i++) |
| 719 | register_valid[i] = 1; |
| 720 | |
| 721 | /* Protected Special Registers */ |
| 722 | |
| 723 | From.Space = UDI29KSpecialRegs; |
| 724 | From.Offset = 0; |
| 725 | To = (UDIUInt32 *)®isters[4 * SR_REGNUM(0)]; |
| 726 | Count = 15; |
| 727 | if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian)) |
| 728 | error("UDIRead() failed in udi_fetch_registers"); |
| 729 | |
| 730 | for (i = SR_REGNUM(0); i < SR_REGNUM(0) + 15; i++) |
| 731 | register_valid[i] = 1; |
| 732 | |
| 733 | if (USE_SHADOW_PC) { /* Let regno_to_srnum() handle the register number */ |
| 734 | fetch_register(NPC_REGNUM); |
| 735 | fetch_register(PC_REGNUM); |
| 736 | fetch_register(PC2_REGNUM); |
| 737 | |
| 738 | /* Unprotected Special Registers sr128-sr135 */ |
| 739 | |
| 740 | From.Space = UDI29KSpecialRegs; |
| 741 | From.Offset = 128; |
| 742 | To = (UDIUInt32 *)®isters[4 * SR_REGNUM(128)]; |
| 743 | Count = 135-128 + 1; |
| 744 | if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian)) |
| 745 | error("UDIRead() failed in udi_fetch_registers"); |
| 746 | |
| 747 | for (i = SR_REGNUM(128); i < SR_REGNUM(128) + 135-128+1; i++) |
| 748 | register_valid[i] = 1; |
| 749 | } |
| 750 | |
| 751 | if (remote_debug) |
| 752 | { |
| 753 | printf_unfiltered("Fetching all registers\n"); |
| 754 | printf_unfiltered("Fetching PC0 = 0x%x, PC1 = 0x%x, PC2 = 0x%x\n", |
| 755 | read_register(NPC_REGNUM), read_register(PC_REGNUM), |
| 756 | read_register(PC2_REGNUM)); |
| 757 | } |
| 758 | |
| 759 | /* There doesn't seem to be any way to get these. */ |
| 760 | { |
| 761 | int val = -1; |
| 762 | supply_register (FPE_REGNUM, (char *) &val); |
| 763 | supply_register (INTE_REGNUM, (char *) &val); |
| 764 | supply_register (FPS_REGNUM, (char *) &val); |
| 765 | supply_register (EXO_REGNUM, (char *) &val); |
| 766 | } |
| 767 | } |
| 768 | |
| 769 | |
| 770 | /********************************************************* UDI_STORE_REGISTERS |
| 771 | ** Store register regno into the target. |
| 772 | * If regno==-1 then store all the registers. |
| 773 | */ |
| 774 | |
| 775 | static void |
| 776 | udi_store_registers (regno) |
| 777 | int regno; |
| 778 | { |
| 779 | UDIUInt32 *From; |
| 780 | UDIResource To; |
| 781 | UDICount Count; |
| 782 | UDISizeT Size = 4; |
| 783 | UDICount CountDone; |
| 784 | UDIBool HostEndian = 0; |
| 785 | |
| 786 | if (regno >= 0) |
| 787 | { |
| 788 | store_register(regno); |
| 789 | return; |
| 790 | } |
| 791 | |
| 792 | if (remote_debug) |
| 793 | { |
| 794 | printf_unfiltered("Storing all registers\n"); |
| 795 | printf_unfiltered("PC0 = 0x%x, PC1 = 0x%x, PC2 = 0x%x\n", read_register(NPC_REGNUM), |
| 796 | read_register(PC_REGNUM), read_register(PC2_REGNUM)); |
| 797 | } |
| 798 | |
| 799 | /* Gr1/rsp */ |
| 800 | |
| 801 | From = (UDIUInt32 *)®isters[4 * GR1_REGNUM]; |
| 802 | To.Space = UDI29KGlobalRegs; |
| 803 | To.Offset = 1; |
| 804 | Count = 1; |
| 805 | if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian)) |
| 806 | error("UDIWrite() failed in udi_store_regisetrs"); |
| 807 | |
| 808 | #if defined(GR64_REGNUM) |
| 809 | |
| 810 | /* Global registers gr64-gr95 */ |
| 811 | |
| 812 | From = (UDIUInt32 *)®isters[4 * GR64_REGNUM]; |
| 813 | To.Space = UDI29KGlobalRegs; |
| 814 | To.Offset = 64; |
| 815 | Count = 32; |
| 816 | if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian)) |
| 817 | error("UDIWrite() failed in udi_store_regisetrs"); |
| 818 | |
| 819 | #endif /* GR64_REGNUM */ |
| 820 | |
| 821 | /* Global registers gr96-gr127 */ |
| 822 | |
| 823 | From = (UDIUInt32 *)®isters[4 * GR96_REGNUM]; |
| 824 | To.Space = UDI29KGlobalRegs; |
| 825 | To.Offset = 96; |
| 826 | Count = 32; |
| 827 | if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian)) |
| 828 | error("UDIWrite() failed in udi_store_regisetrs"); |
| 829 | |
| 830 | /* Local Registers */ |
| 831 | |
| 832 | From = (UDIUInt32 *)®isters[4 * LR0_REGNUM]; |
| 833 | To.Space = UDI29KLocalRegs; |
| 834 | To.Offset = 0; |
| 835 | Count = 128; |
| 836 | if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian)) |
| 837 | error("UDIWrite() failed in udi_store_regisetrs"); |
| 838 | |
| 839 | |
| 840 | /* Protected Special Registers */ /* VAB through TMR */ |
| 841 | |
| 842 | From = (UDIUInt32 *)®isters[4 * SR_REGNUM(0)]; |
| 843 | To.Space = UDI29KSpecialRegs; |
| 844 | To.Offset = 0; |
| 845 | Count = 10; |
| 846 | if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian)) |
| 847 | error("UDIWrite() failed in udi_store_regisetrs"); |
| 848 | |
| 849 | /* PC0, PC1, PC2 possibly as shadow registers */ |
| 850 | |
| 851 | From = (UDIUInt32 *)®isters[4 * SR_REGNUM(10)]; |
| 852 | To.Space = UDI29KSpecialRegs; |
| 853 | Count = 3; |
| 854 | if (USE_SHADOW_PC) |
| 855 | To.Offset = 20; /* SPC0 */ |
| 856 | else |
| 857 | To.Offset = 10; /* PC0 */ |
| 858 | if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian)) |
| 859 | error("UDIWrite() failed in udi_store_regisetrs"); |
| 860 | |
| 861 | /* PC1 via UDI29KPC */ |
| 862 | |
| 863 | From = (UDIUInt32 *)®isters[4 * PC_REGNUM]; |
| 864 | To.Space = UDI29KPC; |
| 865 | To.Offset = 0; /* PC1 */ |
| 866 | Count = 1; |
| 867 | if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian)) |
| 868 | error ("UDIWrite() failed in udi_store_regisetrs"); |
| 869 | |
| 870 | /* LRU and MMU */ |
| 871 | |
| 872 | From = (UDIUInt32 *)®isters[4 * SR_REGNUM(13)]; |
| 873 | To.Space = UDI29KSpecialRegs; |
| 874 | To.Offset = 13; |
| 875 | Count = 2; |
| 876 | if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian)) |
| 877 | error("UDIWrite() failed in udi_store_regisetrs"); |
| 878 | |
| 879 | /* Unprotected Special Registers */ |
| 880 | |
| 881 | From = (UDIUInt32 *)®isters[4 * SR_REGNUM(128)]; |
| 882 | To.Space = UDI29KSpecialRegs; |
| 883 | To.Offset = 128; |
| 884 | Count = 135-128 +1; |
| 885 | if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian)) |
| 886 | error("UDIWrite() failed in udi_store_regisetrs"); |
| 887 | |
| 888 | registers_changed (); |
| 889 | } |
| 890 | |
| 891 | /****************************************************** UDI_PREPARE_TO_STORE */ |
| 892 | /* Get ready to modify the registers array. On machines which store |
| 893 | individual registers, this doesn't need to do anything. On machines |
| 894 | which store all the registers in one fell swoop, this makes sure |
| 895 | that registers contains all the registers from the program being |
| 896 | debugged. */ |
| 897 | |
| 898 | static void |
| 899 | udi_prepare_to_store () |
| 900 | { |
| 901 | /* Do nothing, since we can store individual regs */ |
| 902 | } |
| 903 | |
| 904 | /********************************************************** TRANSLATE_ADDR */ |
| 905 | static CORE_ADDR |
| 906 | translate_addr(addr) |
| 907 | CORE_ADDR addr; |
| 908 | { |
| 909 | #if defined(ULTRA3) && defined(KERNEL_DEBUGGING) |
| 910 | /* Check for a virtual address in the kernel */ |
| 911 | /* Assume physical address of ublock is in paddr_u register */ |
| 912 | /* FIXME: doesn't work for user virtual addresses */ |
| 913 | if (addr >= UVADDR) { |
| 914 | /* PADDR_U register holds the physical address of the ublock */ |
| 915 | CORE_ADDR i = (CORE_ADDR)read_register(PADDR_U_REGNUM); |
| 916 | return(i + addr - (CORE_ADDR)UVADDR); |
| 917 | } else { |
| 918 | return(addr); |
| 919 | } |
| 920 | #else |
| 921 | return(addr); |
| 922 | #endif |
| 923 | } |
| 924 | /************************************************* UDI_XFER_INFERIOR_MEMORY */ |
| 925 | /* FIXME! Merge these two. */ |
| 926 | static int |
| 927 | udi_xfer_inferior_memory (memaddr, myaddr, len, write) |
| 928 | CORE_ADDR memaddr; |
| 929 | char *myaddr; |
| 930 | int len; |
| 931 | int write; |
| 932 | { |
| 933 | |
| 934 | memaddr = translate_addr(memaddr); |
| 935 | |
| 936 | if (write) |
| 937 | return udi_write_inferior_memory (memaddr, myaddr, len); |
| 938 | else |
| 939 | return udi_read_inferior_memory (memaddr, myaddr, len); |
| 940 | } |
| 941 | |
| 942 | /********************************************************** UDI_FILES_INFO */ |
| 943 | static void |
| 944 | udi_files_info () |
| 945 | { |
| 946 | printf_unfiltered ("\tAttached to UDI socket to %s", udi_config_id); |
| 947 | if (prog_name != NULL) |
| 948 | printf_unfiltered ("and running program %s", prog_name); |
| 949 | printf_unfiltered (".\n"); |
| 950 | } |
| 951 | |
| 952 | /**************************************************** UDI_INSERT_BREAKPOINT */ |
| 953 | static int |
| 954 | udi_insert_breakpoint (addr, contents_cache) |
| 955 | CORE_ADDR addr; |
| 956 | char *contents_cache; |
| 957 | { |
| 958 | int cnt; |
| 959 | UDIError err; |
| 960 | |
| 961 | for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++) |
| 962 | if (bkpt_table[cnt].Type == 0) /* Find first free slot */ |
| 963 | break; |
| 964 | |
| 965 | if(cnt >= BKPT_TABLE_SIZE) |
| 966 | error("Too many breakpoints set"); |
| 967 | |
| 968 | bkpt_table[cnt].Addr.Offset = addr; |
| 969 | bkpt_table[cnt].Addr.Space = UDI29KIRAMSpace; |
| 970 | bkpt_table[cnt].PassCount = 1; |
| 971 | bkpt_table[cnt].Type = UDIBreakFlagExecute; |
| 972 | |
| 973 | err = UDISetBreakpoint(bkpt_table[cnt].Addr, |
| 974 | bkpt_table[cnt].PassCount, |
| 975 | bkpt_table[cnt].Type, |
| 976 | &bkpt_table[cnt].BreakId); |
| 977 | |
| 978 | if (err == 0) return 0; /* Success */ |
| 979 | |
| 980 | bkpt_table[cnt].Type = 0; |
| 981 | error("UDISetBreakpoint returned error code %d\n", err); |
| 982 | } |
| 983 | |
| 984 | /**************************************************** UDI_REMOVE_BREAKPOINT */ |
| 985 | static int |
| 986 | udi_remove_breakpoint (addr, contents_cache) |
| 987 | CORE_ADDR addr; |
| 988 | char *contents_cache; |
| 989 | { |
| 990 | int cnt; |
| 991 | UDIError err; |
| 992 | |
| 993 | for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++) |
| 994 | if (bkpt_table[cnt].Addr.Offset == addr) /* Find matching breakpoint */ |
| 995 | break; |
| 996 | |
| 997 | if(cnt >= BKPT_TABLE_SIZE) |
| 998 | error("Can't find breakpoint in table"); |
| 999 | |
| 1000 | bkpt_table[cnt].Type = 0; |
| 1001 | |
| 1002 | err = UDIClearBreakpoint(bkpt_table[cnt].BreakId); |
| 1003 | if (err == 0) return 0; /* Success */ |
| 1004 | |
| 1005 | error("UDIClearBreakpoint returned error code %d\n", err); |
| 1006 | } |
| 1007 | |
| 1008 | static void |
| 1009 | udi_kill(arg,from_tty) |
| 1010 | char *arg; |
| 1011 | int from_tty; |
| 1012 | { |
| 1013 | |
| 1014 | #if 0 |
| 1015 | /* |
| 1016 | UDIStop does not really work as advertised. It causes the TIP to close it's |
| 1017 | connection, which usually results in GDB dying with a SIGPIPE. For now, we |
| 1018 | just invoke udi_close, which seems to get things right. |
| 1019 | */ |
| 1020 | UDIStop(); |
| 1021 | |
| 1022 | udi_session_id = -1; |
| 1023 | inferior_pid = 0; |
| 1024 | |
| 1025 | if (from_tty) |
| 1026 | printf_unfiltered("Target has been stopped."); |
| 1027 | #endif /* 0 */ |
| 1028 | #if 0 |
| 1029 | udi_close(0); |
| 1030 | pop_target(); |
| 1031 | #endif /* 0 */ |
| 1032 | |
| 1033 | /* Keep the target around, e.g. so "run" can do the right thing when |
| 1034 | we are already debugging something. */ |
| 1035 | |
| 1036 | if (UDIDisconnect (udi_session_id, UDITerminateSession)) |
| 1037 | { |
| 1038 | warning ("UDIDisconnect() failed"); |
| 1039 | } |
| 1040 | |
| 1041 | /* Do not try to close udi_session_id again, later in the program. */ |
| 1042 | udi_session_id = -1; |
| 1043 | inferior_pid = 0; |
| 1044 | } |
| 1045 | |
| 1046 | /* |
| 1047 | Load a program into the target. Args are: `program {options}'. The options |
| 1048 | are used to control loading of the program, and are NOT passed onto the |
| 1049 | loaded code as arguments. (You need to use the `run' command to do that.) |
| 1050 | |
| 1051 | The options are: |
| 1052 | -ms %d Set mem stack size to %d |
| 1053 | -rs %d Set regular stack size to %d |
| 1054 | -i send init info (default) |
| 1055 | -noi don't send init info |
| 1056 | -[tT] Load Text section |
| 1057 | -[dD] Load Data section |
| 1058 | -[bB] Load BSS section |
| 1059 | -[lL] Load Lit section |
| 1060 | */ |
| 1061 | |
| 1062 | static void |
| 1063 | download(load_arg_string, from_tty) |
| 1064 | char *load_arg_string; |
| 1065 | int from_tty; |
| 1066 | { |
| 1067 | #define DEFAULT_MEM_STACK_SIZE 0x6000 |
| 1068 | #define DEFAULT_REG_STACK_SIZE 0x2000 |
| 1069 | |
| 1070 | char *token; |
| 1071 | char *filename; |
| 1072 | asection *section; |
| 1073 | bfd *pbfd; |
| 1074 | UDIError err; |
| 1075 | int load_text = 1, load_data = 1, load_bss = 1, load_lit = 1; |
| 1076 | |
| 1077 | address_ranges[0].Space = UDI29KIRAMSpace; |
| 1078 | address_ranges[0].Offset = 0xffffffff; |
| 1079 | address_ranges[0].Size = 0; |
| 1080 | |
| 1081 | address_ranges[1].Space = UDI29KDRAMSpace; |
| 1082 | address_ranges[1].Offset = 0xffffffff; |
| 1083 | address_ranges[1].Size = 0; |
| 1084 | |
| 1085 | stack_sizes[0] = DEFAULT_REG_STACK_SIZE; |
| 1086 | stack_sizes[1] = DEFAULT_MEM_STACK_SIZE; |
| 1087 | |
| 1088 | dont_repeat (); |
| 1089 | |
| 1090 | filename = strtok(load_arg_string, " \t"); |
| 1091 | if (!filename) |
| 1092 | error ("Must specify at least a file name with the load command"); |
| 1093 | |
| 1094 | filename = tilde_expand (filename); |
| 1095 | make_cleanup (free, filename); |
| 1096 | |
| 1097 | while (token = strtok (NULL, " \t")) |
| 1098 | { |
| 1099 | if (token[0] == '-') |
| 1100 | { |
| 1101 | token++; |
| 1102 | |
| 1103 | if (STREQ (token, "ms")) |
| 1104 | stack_sizes[1] = atol (strtok (NULL, " \t")); |
| 1105 | else if (STREQ (token, "rs")) |
| 1106 | stack_sizes[0] = atol (strtok (NULL, " \t")); |
| 1107 | else |
| 1108 | { |
| 1109 | load_text = load_data = load_bss = load_lit = 0; |
| 1110 | |
| 1111 | while (*token) |
| 1112 | { |
| 1113 | switch (*token++) |
| 1114 | { |
| 1115 | case 't': |
| 1116 | case 'T': |
| 1117 | load_text = 1; |
| 1118 | break; |
| 1119 | case 'd': |
| 1120 | case 'D': |
| 1121 | load_data = 1; |
| 1122 | break; |
| 1123 | case 'b': |
| 1124 | case 'B': |
| 1125 | load_bss = 1; |
| 1126 | break; |
| 1127 | case 'l': |
| 1128 | case 'L': |
| 1129 | load_lit = 1; |
| 1130 | break; |
| 1131 | default: |
| 1132 | error ("Unknown UDI load option -%s", token-1); |
| 1133 | } |
| 1134 | } |
| 1135 | } |
| 1136 | } |
| 1137 | } |
| 1138 | |
| 1139 | pbfd = bfd_openr (filename, gnutarget); |
| 1140 | |
| 1141 | if (!pbfd) |
| 1142 | /* FIXME: should be using bfd_errmsg, not assuming it was |
| 1143 | bfd_error_system_call. */ |
| 1144 | perror_with_name (filename); |
| 1145 | |
| 1146 | /* FIXME: should be checking for errors from bfd_close (for one thing, |
| 1147 | on error it does not free all the storage associated with the |
| 1148 | bfd). */ |
| 1149 | make_cleanup (bfd_close, pbfd); |
| 1150 | |
| 1151 | QUIT; |
| 1152 | immediate_quit++; |
| 1153 | |
| 1154 | if (!bfd_check_format (pbfd, bfd_object)) |
| 1155 | error ("It doesn't seem to be an object file"); |
| 1156 | |
| 1157 | for (section = pbfd->sections; section; section = section->next) |
| 1158 | { |
| 1159 | if (bfd_get_section_flags (pbfd, section) & SEC_ALLOC) |
| 1160 | { |
| 1161 | UDIResource To; |
| 1162 | UDICount Count; |
| 1163 | unsigned long section_size, section_end; |
| 1164 | const char *section_name; |
| 1165 | |
| 1166 | section_name = bfd_get_section_name (pbfd, section); |
| 1167 | if (STREQ (section_name, ".text") && !load_text) |
| 1168 | continue; |
| 1169 | else if (STREQ (section_name, ".data") && !load_data) |
| 1170 | continue; |
| 1171 | else if (STREQ (section_name, ".bss") && !load_bss) |
| 1172 | continue; |
| 1173 | else if (STREQ (section_name, ".lit") && !load_lit) |
| 1174 | continue; |
| 1175 | |
| 1176 | To.Offset = bfd_get_section_vma (pbfd, section); |
| 1177 | section_size = bfd_section_size (pbfd, section); |
| 1178 | section_end = To.Offset + section_size; |
| 1179 | |
| 1180 | if (section_size == 0) |
| 1181 | /* This is needed at least in the BSS case, where the code |
| 1182 | below starts writing before it even checks the size. */ |
| 1183 | continue; |
| 1184 | |
| 1185 | printf_unfiltered("[Loading section %s at %x (%d bytes)]\n", |
| 1186 | section_name, |
| 1187 | To.Offset, |
| 1188 | section_size); |
| 1189 | |
| 1190 | if (bfd_get_section_flags (pbfd, section) & SEC_CODE) |
| 1191 | { |
| 1192 | To.Space = UDI29KIRAMSpace; |
| 1193 | |
| 1194 | address_ranges[0].Offset = min (address_ranges[0].Offset, |
| 1195 | To.Offset); |
| 1196 | address_ranges[0].Size = max (address_ranges[0].Size, |
| 1197 | section_end |
| 1198 | - address_ranges[0].Offset); |
| 1199 | } |
| 1200 | else |
| 1201 | { |
| 1202 | To.Space = UDI29KDRAMSpace; |
| 1203 | |
| 1204 | address_ranges[1].Offset = min (address_ranges[1].Offset, |
| 1205 | To.Offset); |
| 1206 | address_ranges[1].Size = max (address_ranges[1].Size, |
| 1207 | section_end |
| 1208 | - address_ranges[1].Offset); |
| 1209 | } |
| 1210 | |
| 1211 | if (bfd_get_section_flags (pbfd, section) & SEC_LOAD) /* Text, data or lit */ |
| 1212 | { |
| 1213 | file_ptr fptr; |
| 1214 | |
| 1215 | fptr = 0; |
| 1216 | |
| 1217 | while (section_size > 0) |
| 1218 | { |
| 1219 | char buffer[1024]; |
| 1220 | |
| 1221 | Count = min (section_size, 1024); |
| 1222 | |
| 1223 | bfd_get_section_contents (pbfd, section, buffer, fptr, |
| 1224 | Count); |
| 1225 | |
| 1226 | err = UDIWrite ((UDIHostMemPtr)buffer, /* From */ |
| 1227 | To, /* To */ |
| 1228 | Count, /* Count */ |
| 1229 | (UDISizeT)1, /* Size */ |
| 1230 | &Count, /* CountDone */ |
| 1231 | (UDIBool)0); /* HostEndian */ |
| 1232 | if (err) |
| 1233 | error ("UDIWrite failed, error = %d", err); |
| 1234 | |
| 1235 | To.Offset += Count; |
| 1236 | fptr += Count; |
| 1237 | section_size -= Count; |
| 1238 | } |
| 1239 | } |
| 1240 | else /* BSS */ |
| 1241 | { |
| 1242 | UDIResource From; |
| 1243 | unsigned long zero = 0; |
| 1244 | |
| 1245 | /* Write a zero byte at the vma */ |
| 1246 | /* FIXME: Broken for sections of 1-3 bytes (we test for |
| 1247 | zero above). */ |
| 1248 | err = UDIWrite ((UDIHostMemPtr)&zero, /* From */ |
| 1249 | To, /* To */ |
| 1250 | (UDICount)1, /* Count */ |
| 1251 | (UDISizeT)4, /* Size */ |
| 1252 | &Count, /* CountDone */ |
| 1253 | (UDIBool)0); /* HostEndian */ |
| 1254 | if (err) |
| 1255 | error ("UDIWrite failed, error = %d", err); |
| 1256 | |
| 1257 | From = To; |
| 1258 | To.Offset+=4; |
| 1259 | |
| 1260 | /* Now, duplicate it for the length of the BSS */ |
| 1261 | err = UDICopy (From, /* From */ |
| 1262 | To, /* To */ |
| 1263 | (UDICount)(section_size/4 - 1), /* Count */ |
| 1264 | (UDISizeT)4, /* Size */ |
| 1265 | &Count, /* CountDone */ |
| 1266 | (UDIBool)1); /* Direction */ |
| 1267 | if (err) |
| 1268 | { |
| 1269 | char message[100]; |
| 1270 | int xerr; |
| 1271 | |
| 1272 | xerr = UDIGetErrorMsg(err, 100, message, &Count); |
| 1273 | if (!xerr) |
| 1274 | fprintf_unfiltered (gdb_stderr, "Error is %s\n", message); |
| 1275 | else |
| 1276 | fprintf_unfiltered (gdb_stderr, "xerr is %d\n", xerr); |
| 1277 | error ("UDICopy failed, error = %d", err); |
| 1278 | } |
| 1279 | } |
| 1280 | |
| 1281 | } |
| 1282 | } |
| 1283 | |
| 1284 | entry.Space = UDI29KIRAMSpace; |
| 1285 | entry.Offset = bfd_get_start_address (pbfd); |
| 1286 | |
| 1287 | immediate_quit--; |
| 1288 | } |
| 1289 | |
| 1290 | /* Function to download an image into the remote target. */ |
| 1291 | |
| 1292 | static void |
| 1293 | udi_load (args, from_tty) |
| 1294 | char *args; |
| 1295 | int from_tty; |
| 1296 | { |
| 1297 | download (args, from_tty); |
| 1298 | |
| 1299 | /* As a convenience, pick up any symbol info that is in the program |
| 1300 | being loaded. Note that we assume that the program is the``mainline''; |
| 1301 | if this is not always true, then this code will need to be augmented. */ |
| 1302 | symbol_file_add (strtok (args, " \t"), from_tty, 0, 1, 0, 0); |
| 1303 | |
| 1304 | /* Getting new symbols may change our opinion about what is |
| 1305 | frameless. */ |
| 1306 | reinit_frame_cache (); |
| 1307 | } |
| 1308 | |
| 1309 | /*************************************************** UDI_WRITE_INFERIOR_MEMORY |
| 1310 | ** Copy LEN bytes of data from debugger memory at MYADDR |
| 1311 | to inferior's memory at MEMADDR. Returns number of bytes written. */ |
| 1312 | static int |
| 1313 | udi_write_inferior_memory (memaddr, myaddr, len) |
| 1314 | CORE_ADDR memaddr; |
| 1315 | char *myaddr; |
| 1316 | int len; |
| 1317 | { |
| 1318 | int nwritten = 0; |
| 1319 | UDIUInt32 *From; |
| 1320 | UDIResource To; |
| 1321 | UDICount Count; |
| 1322 | UDISizeT Size = 1; |
| 1323 | UDICount CountDone = 0; |
| 1324 | UDIBool HostEndian = 0; |
| 1325 | |
| 1326 | To.Space = udi_memory_space(memaddr); |
| 1327 | From = (UDIUInt32*)myaddr; |
| 1328 | |
| 1329 | while (nwritten < len) |
| 1330 | { Count = len - nwritten; |
| 1331 | if (Count > MAXDATA) Count = MAXDATA; |
| 1332 | To.Offset = memaddr + nwritten; |
| 1333 | if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian)) |
| 1334 | { error("UDIWrite() failed in udi_write_inferior_memory"); |
| 1335 | break; |
| 1336 | } |
| 1337 | else |
| 1338 | { nwritten += CountDone; |
| 1339 | From += CountDone; |
| 1340 | } |
| 1341 | } |
| 1342 | return(nwritten); |
| 1343 | } |
| 1344 | |
| 1345 | /**************************************************** UDI_READ_INFERIOR_MEMORY |
| 1346 | ** Read LEN bytes from inferior memory at MEMADDR. Put the result |
| 1347 | at debugger address MYADDR. Returns number of bytes read. */ |
| 1348 | static int |
| 1349 | udi_read_inferior_memory(memaddr, myaddr, len) |
| 1350 | CORE_ADDR memaddr; |
| 1351 | char *myaddr; |
| 1352 | int len; |
| 1353 | { |
| 1354 | int nread = 0; |
| 1355 | UDIResource From; |
| 1356 | UDIUInt32 *To; |
| 1357 | UDICount Count; |
| 1358 | UDISizeT Size = 1; |
| 1359 | UDICount CountDone = 0; |
| 1360 | UDIBool HostEndian = 0; |
| 1361 | UDIError err; |
| 1362 | |
| 1363 | From.Space = udi_memory_space(memaddr); |
| 1364 | To = (UDIUInt32*)myaddr; |
| 1365 | |
| 1366 | while (nread < len) |
| 1367 | { Count = len - nread; |
| 1368 | if (Count > MAXDATA) Count = MAXDATA; |
| 1369 | From.Offset = memaddr + nread; |
| 1370 | if(err = UDIRead(From, To, Count, Size, &CountDone, HostEndian)) |
| 1371 | { error("UDIRead() failed in udi_read_inferior_memory"); |
| 1372 | break; |
| 1373 | } |
| 1374 | else |
| 1375 | { nread += CountDone; |
| 1376 | To += CountDone; |
| 1377 | } |
| 1378 | } |
| 1379 | return(nread); |
| 1380 | } |
| 1381 | |
| 1382 | /********************************************************************* WARNING |
| 1383 | */ |
| 1384 | udi_warning(num) |
| 1385 | int num; |
| 1386 | { |
| 1387 | error ("ERROR while loading program into remote TIP: $d\n", num); |
| 1388 | } |
| 1389 | |
| 1390 | |
| 1391 | /*****************************************************************************/ |
| 1392 | /* Fetch a single register indicatated by 'regno'. |
| 1393 | * Returns 0/-1 on success/failure. |
| 1394 | */ |
| 1395 | static void |
| 1396 | fetch_register (regno) |
| 1397 | int regno; |
| 1398 | { |
| 1399 | UDIResource From; |
| 1400 | UDIUInt32 To; |
| 1401 | UDICount Count = 1; |
| 1402 | UDISizeT Size = 4; |
| 1403 | UDICount CountDone; |
| 1404 | UDIBool HostEndian = 0; |
| 1405 | UDIError err; |
| 1406 | int result; |
| 1407 | |
| 1408 | if (regno == GR1_REGNUM) |
| 1409 | { |
| 1410 | From.Space = UDI29KGlobalRegs; |
| 1411 | From.Offset = 1; |
| 1412 | } |
| 1413 | else if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32) |
| 1414 | { |
| 1415 | From.Space = UDI29KGlobalRegs; |
| 1416 | From.Offset = (regno - GR96_REGNUM) + 96;; |
| 1417 | } |
| 1418 | |
| 1419 | #if defined(GR64_REGNUM) |
| 1420 | |
| 1421 | else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32 ) |
| 1422 | { |
| 1423 | From.Space = UDI29KGlobalRegs; |
| 1424 | From.Offset = (regno - GR64_REGNUM) + 64; |
| 1425 | } |
| 1426 | |
| 1427 | #endif /* GR64_REGNUM */ |
| 1428 | |
| 1429 | else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128) |
| 1430 | { |
| 1431 | From.Space = UDI29KLocalRegs; |
| 1432 | From.Offset = (regno - LR0_REGNUM); |
| 1433 | } |
| 1434 | else if (regno>=FPE_REGNUM && regno<=EXO_REGNUM) |
| 1435 | { |
| 1436 | int val = -1; |
| 1437 | /*supply_register(160 + (regno - FPE_REGNUM),(char *) &val);*/ |
| 1438 | supply_register(regno, (char *) &val); |
| 1439 | return; /* Pretend Success */ |
| 1440 | } |
| 1441 | else |
| 1442 | { |
| 1443 | From.Space = UDI29KSpecialRegs; |
| 1444 | From.Offset = regnum_to_srnum(regno); |
| 1445 | } |
| 1446 | |
| 1447 | if (err = UDIRead(From, &To, Count, Size, &CountDone, HostEndian)) |
| 1448 | error("UDIRead() failed in udi_fetch_registers"); |
| 1449 | |
| 1450 | supply_register(regno, (char *) &To); |
| 1451 | |
| 1452 | if (remote_debug) |
| 1453 | printf_unfiltered("Fetching register %s = 0x%x\n", reg_names[regno], To); |
| 1454 | } |
| 1455 | /*****************************************************************************/ |
| 1456 | /* Store a single register indicated by 'regno'. |
| 1457 | * Returns 0/-1 on success/failure. |
| 1458 | */ |
| 1459 | static int |
| 1460 | store_register (regno) |
| 1461 | int regno; |
| 1462 | { |
| 1463 | int result; |
| 1464 | UDIUInt32 From; |
| 1465 | UDIResource To; |
| 1466 | UDICount Count = 1; |
| 1467 | UDISizeT Size = 4; |
| 1468 | UDICount CountDone; |
| 1469 | UDIBool HostEndian = 0; |
| 1470 | |
| 1471 | From = read_register (regno); /* get data value */ |
| 1472 | |
| 1473 | if (remote_debug) |
| 1474 | printf_unfiltered("Storing register %s = 0x%x\n", reg_names[regno], From); |
| 1475 | |
| 1476 | if (regno == GR1_REGNUM) |
| 1477 | { |
| 1478 | To.Space = UDI29KGlobalRegs; |
| 1479 | To.Offset = 1; |
| 1480 | result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian); |
| 1481 | /* Setting GR1 changes the numbers of all the locals, so invalidate the |
| 1482 | * register cache. Do this *after* calling read_register, because we want |
| 1483 | * read_register to return the value that write_register has just stuffed |
| 1484 | * into the registers array, not the value of the register fetched from |
| 1485 | * the inferior. |
| 1486 | */ |
| 1487 | registers_changed (); |
| 1488 | } |
| 1489 | #if defined(GR64_REGNUM) |
| 1490 | else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32 ) |
| 1491 | { |
| 1492 | To.Space = UDI29KGlobalRegs; |
| 1493 | To.Offset = (regno - GR64_REGNUM) + 64; |
| 1494 | result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian); |
| 1495 | } |
| 1496 | #endif /* GR64_REGNUM */ |
| 1497 | else if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32) |
| 1498 | { |
| 1499 | To.Space = UDI29KGlobalRegs; |
| 1500 | To.Offset = (regno - GR96_REGNUM) + 96; |
| 1501 | result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian); |
| 1502 | } |
| 1503 | else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128) |
| 1504 | { |
| 1505 | To.Space = UDI29KLocalRegs; |
| 1506 | To.Offset = (regno - LR0_REGNUM); |
| 1507 | result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian); |
| 1508 | } |
| 1509 | else if (regno >= FPE_REGNUM && regno <= EXO_REGNUM) |
| 1510 | return 0; /* Pretend Success */ |
| 1511 | else if (regno == PC_REGNUM) |
| 1512 | { |
| 1513 | /* PC1 via UDI29KPC */ |
| 1514 | |
| 1515 | To.Space = UDI29KPC; |
| 1516 | To.Offset = 0; /* PC1 */ |
| 1517 | result = UDIWrite (&From, To, Count, Size, &CountDone, HostEndian); |
| 1518 | |
| 1519 | /* Writing to this loc actually changes the values of pc0 & pc1 */ |
| 1520 | |
| 1521 | register_valid[PC_REGNUM] = 0; /* pc1 */ |
| 1522 | register_valid[NPC_REGNUM] = 0; /* pc0 */ |
| 1523 | } |
| 1524 | else /* An unprotected or protected special register */ |
| 1525 | { |
| 1526 | To.Space = UDI29KSpecialRegs; |
| 1527 | To.Offset = regnum_to_srnum(regno); |
| 1528 | result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian); |
| 1529 | } |
| 1530 | |
| 1531 | if (result != 0) |
| 1532 | error("UDIWrite() failed in store_registers"); |
| 1533 | |
| 1534 | return 0; |
| 1535 | } |
| 1536 | /********************************************************** REGNUM_TO_SRNUM */ |
| 1537 | /* |
| 1538 | * Convert a gdb special register number to a 29000 special register number. |
| 1539 | */ |
| 1540 | static int |
| 1541 | regnum_to_srnum(regno) |
| 1542 | int regno; |
| 1543 | { |
| 1544 | switch(regno) { |
| 1545 | case VAB_REGNUM: return(0); |
| 1546 | case OPS_REGNUM: return(1); |
| 1547 | case CPS_REGNUM: return(2); |
| 1548 | case CFG_REGNUM: return(3); |
| 1549 | case CHA_REGNUM: return(4); |
| 1550 | case CHD_REGNUM: return(5); |
| 1551 | case CHC_REGNUM: return(6); |
| 1552 | case RBP_REGNUM: return(7); |
| 1553 | case TMC_REGNUM: return(8); |
| 1554 | case TMR_REGNUM: return(9); |
| 1555 | case NPC_REGNUM: return(USE_SHADOW_PC ? (20) : (10)); |
| 1556 | case PC_REGNUM: return(USE_SHADOW_PC ? (21) : (11)); |
| 1557 | case PC2_REGNUM: return(USE_SHADOW_PC ? (22) : (12)); |
| 1558 | case MMU_REGNUM: return(13); |
| 1559 | case LRU_REGNUM: return(14); |
| 1560 | case IPC_REGNUM: return(128); |
| 1561 | case IPA_REGNUM: return(129); |
| 1562 | case IPB_REGNUM: return(130); |
| 1563 | case Q_REGNUM: return(131); |
| 1564 | case ALU_REGNUM: return(132); |
| 1565 | case BP_REGNUM: return(133); |
| 1566 | case FC_REGNUM: return(134); |
| 1567 | case CR_REGNUM: return(135); |
| 1568 | case FPE_REGNUM: return(160); |
| 1569 | case INTE_REGNUM: return(161); |
| 1570 | case FPS_REGNUM: return(162); |
| 1571 | case EXO_REGNUM:return(164); |
| 1572 | default: |
| 1573 | return(255); /* Failure ? */ |
| 1574 | } |
| 1575 | } |
| 1576 | /****************************************************************************/ |
| 1577 | /* |
| 1578 | * Determine the Target memory space qualifier based on the addr. |
| 1579 | * FIXME: Can't distinguis I_ROM/D_ROM. |
| 1580 | * FIXME: Doesn't know anything about I_CACHE/D_CACHE. |
| 1581 | */ |
| 1582 | static CPUSpace |
| 1583 | udi_memory_space(addr) |
| 1584 | CORE_ADDR addr; |
| 1585 | { |
| 1586 | UDIUInt32 tstart = IMemStart; |
| 1587 | UDIUInt32 tend = tstart + IMemSize; |
| 1588 | UDIUInt32 dstart = DMemStart; |
| 1589 | UDIUInt32 dend = tstart + DMemSize; |
| 1590 | UDIUInt32 rstart = RMemStart; |
| 1591 | UDIUInt32 rend = tstart + RMemSize; |
| 1592 | |
| 1593 | if (((UDIUInt32)addr >= tstart) && ((UDIUInt32)addr < tend)) { |
| 1594 | return UDI29KIRAMSpace; |
| 1595 | } else if (((UDIUInt32)addr >= dstart) && ((UDIUInt32)addr < dend)) { |
| 1596 | return UDI29KDRAMSpace; |
| 1597 | } else if (((UDIUInt32)addr >= rstart) && ((UDIUInt32)addr < rend)) { |
| 1598 | /* FIXME: how do we determine between D_ROM and I_ROM */ |
| 1599 | return UDI29KIROMSpace; |
| 1600 | } else /* FIXME: what do me do now? */ |
| 1601 | return UDI29KDRAMSpace; /* Hmmm! */ |
| 1602 | } |
| 1603 | /*********************************************************************** STUBS |
| 1604 | */ |
| 1605 | |
| 1606 | void convert16() {;} |
| 1607 | void convert32() {;} |
| 1608 | GDB_FILE * EchoFile = 0; /* used for debugging */ |
| 1609 | int QuietMode = 0; /* used for debugging */ |
| 1610 | \f |
| 1611 | #ifdef NO_HIF_SUPPORT |
| 1612 | service_HIF(msg) |
| 1613 | union msg_t *msg; |
| 1614 | { |
| 1615 | return(0); /* Emulate a failure */ |
| 1616 | } |
| 1617 | #endif |
| 1618 | \f |
| 1619 | /* Target_ops vector. Not static because there does not seem to be |
| 1620 | any portable way to do a forward declaration of a static variable. |
| 1621 | The RS/6000 doesn't like "extern" followed by "static"; SunOS |
| 1622 | /bin/cc doesn't like "static" twice. */ |
| 1623 | |
| 1624 | struct target_ops udi_ops ; |
| 1625 | |
| 1626 | static void init_udi_ops(void) |
| 1627 | { |
| 1628 | udi_ops.to_shortname = "udi"; |
| 1629 | udi_ops.to_longname = "Remote UDI connected TIP"; |
| 1630 | udi_ops.to_doc = "Remote debug an AMD 29k using UDI socket connection to TIP process.\n\ |
| 1631 | Arguments are\n\ |
| 1632 | `configuration-id AF_INET hostname port-number'\n\ |
| 1633 | To connect via the network, where hostname and port-number specify the\n\ |
| 1634 | host and port where you can connect via UDI.\n\ |
| 1635 | configuration-id is unused.\n\ |
| 1636 | \n\ |
| 1637 | `configuration-id AF_UNIX socket-name tip-program'\n\ |
| 1638 | To connect using a local connection to the \"tip.exe\" program which is\n\ |
| 1639 | supplied by AMD. If socket-name specifies an AF_UNIX socket then the\n\ |
| 1640 | tip program must already be started; connect to it using that socket.\n\ |
| 1641 | If not, start up tip-program, which should be the name of the tip\n\ |
| 1642 | program. If appropriate, the PATH environment variable is searched.\n\ |
| 1643 | configuration-id is unused.\n\ |
| 1644 | \n\ |
| 1645 | `configuration-id'\n\ |
| 1646 | Look up the configuration in ./udi_soc or /etc/udi_soc, which\n\ |
| 1647 | are files containing lines in the above formats. configuration-id is\n\ |
| 1648 | used to pick which line of the file to use." ; |
| 1649 | udi_ops.to_open = udi_open; |
| 1650 | udi_ops.to_close = udi_close; |
| 1651 | udi_ops.to_attach = udi_attach; |
| 1652 | udi_ops.to_detach = udi_detach; |
| 1653 | udi_ops.to_resume = udi_resume; |
| 1654 | udi_ops.to_wait = udi_wait; |
| 1655 | udi_ops.to_fetch_registers = udi_fetch_registers; |
| 1656 | udi_ops.to_store_registers = udi_store_registers; |
| 1657 | udi_ops.to_prepare_to_store = udi_prepare_to_store; |
| 1658 | udi_ops.to_xfer_memory = udi_xfer_inferior_memory; |
| 1659 | udi_ops.to_files_info = udi_files_info; |
| 1660 | udi_ops.to_insert_breakpoint = udi_insert_breakpoint; |
| 1661 | udi_ops.to_remove_breakpoint = udi_remove_breakpoint; |
| 1662 | udi_ops.to_terminal_init = 0; |
| 1663 | udi_ops.to_terminal_inferior = 0; |
| 1664 | udi_ops.to_terminal_ours_for_output = 0; |
| 1665 | udi_ops.to_terminal_ours = 0; |
| 1666 | udi_ops.to_terminal_info = 0; |
| 1667 | udi_ops.to_kill = udi_kill; |
| 1668 | udi_ops.to_load = udi_load; |
| 1669 | udi_ops.to_lookup_symbol = 0; |
| 1670 | udi_ops.to_create_inferior = udi_create_inferior; |
| 1671 | udi_ops.to_mourn_inferior = udi_mourn; |
| 1672 | udi_ops.to_can_run = 0; |
| 1673 | udi_ops.to_notice_signals = 0; |
| 1674 | udi_ops.to_thread_alive = 0; |
| 1675 | udi_ops.to_stop = 0; |
| 1676 | udi_ops.to_stratum = process_stratum; |
| 1677 | udi_ops.DONT_USE = 0; |
| 1678 | udi_ops.to_has_all_memory = 1; |
| 1679 | udi_ops.to_has_memory = 1; |
| 1680 | udi_ops.to_has_stack = 1; |
| 1681 | udi_ops.to_has_registers = 1; |
| 1682 | udi_ops.to_has_execution = 1; |
| 1683 | udi_ops.to_sections = 0; |
| 1684 | udi_ops.to_sections_end = 0; |
| 1685 | udi_ops.to_magic = OPS_MAGIC; |
| 1686 | }; |
| 1687 | |
| 1688 | void |
| 1689 | _initialize_remote_udi () |
| 1690 | { |
| 1691 | init_udi_ops() ; |
| 1692 | add_target (&udi_ops); |
| 1693 | } |