| 1 | /* Memory-access and commands for remote VxWorks processes, for GDB. |
| 2 | Copyright 1990, 1991, 1992 Free Software Foundation, Inc. |
| 3 | Contributed by Wind River Systems and Cygnus Support. |
| 4 | |
| 5 | This file is part of GDB. |
| 6 | |
| 7 | This program is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 2 of the License, or |
| 10 | (at your option) any later version. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ |
| 20 | |
| 21 | #include "defs.h" |
| 22 | #include "frame.h" |
| 23 | #include "inferior.h" |
| 24 | #include "wait.h" |
| 25 | #include "target.h" |
| 26 | #include "gdbcore.h" |
| 27 | #include "command.h" |
| 28 | #include "symtab.h" |
| 29 | #include "symfile.h" /* for struct complaint */ |
| 30 | |
| 31 | #include <string.h> |
| 32 | #include <errno.h> |
| 33 | #include <signal.h> |
| 34 | #include <fcntl.h> |
| 35 | #include <sys/types.h> |
| 36 | #include <sys/time.h> |
| 37 | #include <sys/socket.h> |
| 38 | #define free bogon_free /* Sun claims "int free()" not void */ |
| 39 | #include <rpc/rpc.h> |
| 40 | #undef free |
| 41 | #include <sys/time.h> /* UTek's <rpc/rpc.h> doesn't #incl this */ |
| 42 | #include <netdb.h> |
| 43 | #include "vx-share/ptrace.h" |
| 44 | #include "vx-share/xdr_ptrace.h" |
| 45 | #include "vx-share/xdr_ld.h" |
| 46 | #include "vx-share/xdr_rdb.h" |
| 47 | #include "vx-share/dbgRpcLib.h" |
| 48 | #include "vx-share/reg.h" |
| 49 | |
| 50 | #include <symtab.h> |
| 51 | |
| 52 | extern void symbol_file_command (); |
| 53 | extern int stop_soon_quietly; /* for wait_for_inferior */ |
| 54 | extern void host_convert_to_virtual (); |
| 55 | extern void host_convert_from_virtual (); |
| 56 | |
| 57 | static int net_ptrace_clnt_call (); /* Forward decl */ |
| 58 | static enum clnt_stat net_clnt_call (); /* Forward decl */ |
| 59 | extern struct target_ops vx_ops, vx_run_ops; /* Forward declaration */ |
| 60 | |
| 61 | /* Saved name of target host and called function for "info files". |
| 62 | Both malloc'd. */ |
| 63 | |
| 64 | static char *vx_host; |
| 65 | static char *vx_running; /* Called function */ |
| 66 | |
| 67 | /* Nonzero means target that is being debugged remotely has a floating |
| 68 | point processor. */ |
| 69 | |
| 70 | static int target_has_fp; |
| 71 | |
| 72 | /* Default error message when the network is forking up. */ |
| 73 | |
| 74 | static const char rpcerr[] = "network target debugging: rpc error"; |
| 75 | |
| 76 | CLIENT *pClient; /* client used in net debugging */ |
| 77 | static int ptraceSock = RPC_ANYSOCK; |
| 78 | |
| 79 | enum clnt_stat net_clnt_call(); |
| 80 | static void parse_args (); |
| 81 | |
| 82 | static struct timeval rpcTimeout = { 10, 0 }; |
| 83 | |
| 84 | static char *skip_white_space (); |
| 85 | static char *find_white_space (); |
| 86 | |
| 87 | /* Tell the VxWorks target system to download a file. |
| 88 | The load addresses of the text, data, and bss segments are |
| 89 | stored in *pTextAddr, *pDataAddr, and *pBssAddr (respectively). |
| 90 | Returns 0 for success, -1 for failure. */ |
| 91 | |
| 92 | static int |
| 93 | net_load (filename, pTextAddr, pDataAddr, pBssAddr) |
| 94 | char *filename; |
| 95 | CORE_ADDR *pTextAddr; |
| 96 | CORE_ADDR *pDataAddr; |
| 97 | CORE_ADDR *pBssAddr; |
| 98 | { |
| 99 | enum clnt_stat status; |
| 100 | struct ldfile ldstruct; |
| 101 | struct timeval load_timeout; |
| 102 | |
| 103 | bzero ((char *) &ldstruct, sizeof (ldstruct)); |
| 104 | |
| 105 | /* We invoke clnt_call () here directly, instead of through |
| 106 | net_clnt_call (), because we need to set a large timeout value. |
| 107 | The load on the target side can take quite a while, easily |
| 108 | more than 10 seconds. The user can kill this call by typing |
| 109 | CTRL-C if there really is a problem with the load. |
| 110 | |
| 111 | Do not change the tv_sec value without checking -- select() imposes |
| 112 | a limit of 10**8 on it for no good reason that I can see... */ |
| 113 | |
| 114 | load_timeout.tv_sec = 99999999; /* A large number, effectively inf. */ |
| 115 | load_timeout.tv_usec = 0; |
| 116 | |
| 117 | status = clnt_call (pClient, VX_LOAD, xdr_wrapstring, &filename, xdr_ldfile, |
| 118 | &ldstruct, load_timeout); |
| 119 | |
| 120 | if (status == RPC_SUCCESS) |
| 121 | { |
| 122 | if (*ldstruct.name == 0) /* load failed on VxWorks side */ |
| 123 | return -1; |
| 124 | *pTextAddr = ldstruct.txt_addr; |
| 125 | *pDataAddr = ldstruct.data_addr; |
| 126 | *pBssAddr = ldstruct.bss_addr; |
| 127 | return 0; |
| 128 | } |
| 129 | else |
| 130 | return -1; |
| 131 | } |
| 132 | |
| 133 | /* returns 0 if successful, errno if RPC failed or VxWorks complains. */ |
| 134 | |
| 135 | static int |
| 136 | net_break (addr, procnum) |
| 137 | int addr; |
| 138 | u_long procnum; |
| 139 | { |
| 140 | enum clnt_stat status; |
| 141 | int break_status; |
| 142 | Rptrace ptrace_in; /* XXX This is stupid. It doesn't need to be a ptrace |
| 143 | structure. How about something smaller? */ |
| 144 | |
| 145 | bzero ((char *) &ptrace_in, sizeof (ptrace_in)); |
| 146 | break_status = 0; |
| 147 | |
| 148 | ptrace_in.addr = addr; |
| 149 | ptrace_in.pid = inferior_pid; |
| 150 | |
| 151 | status = net_clnt_call (procnum, xdr_rptrace, &ptrace_in, xdr_int, |
| 152 | &break_status); |
| 153 | |
| 154 | if (status != RPC_SUCCESS) |
| 155 | return errno; |
| 156 | |
| 157 | if (break_status == -1) |
| 158 | return ENOMEM; |
| 159 | return break_status; /* probably (FIXME) zero */ |
| 160 | } |
| 161 | |
| 162 | /* returns 0 if successful, errno otherwise */ |
| 163 | |
| 164 | static int |
| 165 | vx_insert_breakpoint (addr) |
| 166 | int addr; |
| 167 | { |
| 168 | return net_break (addr, VX_BREAK_ADD); |
| 169 | } |
| 170 | |
| 171 | /* returns 0 if successful, errno otherwise */ |
| 172 | |
| 173 | static int |
| 174 | vx_remove_breakpoint (addr) |
| 175 | int addr; |
| 176 | { |
| 177 | return net_break (addr, VX_BREAK_DELETE); |
| 178 | } |
| 179 | |
| 180 | /* Start an inferior process and sets inferior_pid to its pid. |
| 181 | EXEC_FILE is the file to run. |
| 182 | ALLARGS is a string containing the arguments to the program. |
| 183 | ENV is the environment vector to pass. |
| 184 | Returns process id. Errors reported with error(). |
| 185 | On VxWorks, we ignore exec_file. */ |
| 186 | |
| 187 | static void |
| 188 | vx_create_inferior (exec_file, args, env) |
| 189 | char *exec_file; |
| 190 | char *args; |
| 191 | char **env; |
| 192 | { |
| 193 | enum clnt_stat status; |
| 194 | arg_array passArgs; |
| 195 | TASK_START taskStart; |
| 196 | |
| 197 | bzero ((char *) &passArgs, sizeof (passArgs)); |
| 198 | bzero ((char *) &taskStart, sizeof (taskStart)); |
| 199 | |
| 200 | /* parse arguments, put them in passArgs */ |
| 201 | |
| 202 | parse_args (args, &passArgs); |
| 203 | |
| 204 | if (passArgs.arg_array_len == 0) |
| 205 | error ("You must specify a function name to run, and arguments if any"); |
| 206 | |
| 207 | status = net_clnt_call (PROCESS_START, xdr_arg_array, &passArgs, |
| 208 | xdr_TASK_START, &taskStart); |
| 209 | |
| 210 | if ((status != RPC_SUCCESS) || (taskStart.status == -1)) |
| 211 | error ("Can't create process on remote target machine"); |
| 212 | |
| 213 | /* Save the name of the running function */ |
| 214 | vx_running = savestring (passArgs.arg_array_val[0], |
| 215 | strlen (passArgs.arg_array_val[0])); |
| 216 | |
| 217 | #ifdef CREATE_INFERIOR_HOOK |
| 218 | CREATE_INFERIOR_HOOK (pid); |
| 219 | #endif |
| 220 | |
| 221 | push_target (&vx_run_ops); |
| 222 | inferior_pid = taskStart.pid; |
| 223 | |
| 224 | /* We will get a trace trap after one instruction. |
| 225 | Insert breakpoints and continue. */ |
| 226 | |
| 227 | init_wait_for_inferior (); |
| 228 | |
| 229 | /* Set up the "saved terminal modes" of the inferior |
| 230 | based on what modes we are starting it with. */ |
| 231 | target_terminal_init (); |
| 232 | |
| 233 | /* Install inferior's terminal modes. */ |
| 234 | target_terminal_inferior (); |
| 235 | |
| 236 | stop_soon_quietly = 1; |
| 237 | wait_for_inferior (); /* Get the task spawn event */ |
| 238 | stop_soon_quietly = 0; |
| 239 | |
| 240 | /* insert_step_breakpoint (); FIXME, do we need this? */ |
| 241 | proceed(-1, -1, 0); |
| 242 | } |
| 243 | |
| 244 | /* Fill ARGSTRUCT in argc/argv form with the arguments from the |
| 245 | argument string ARGSTRING. */ |
| 246 | |
| 247 | static void |
| 248 | parse_args (arg_string, arg_struct) |
| 249 | register char *arg_string; |
| 250 | arg_array *arg_struct; |
| 251 | { |
| 252 | register int arg_count = 0; /* number of arguments */ |
| 253 | register int arg_index = 0; |
| 254 | register char *p0; |
| 255 | |
| 256 | bzero ((char *) arg_struct, sizeof (arg_array)); |
| 257 | |
| 258 | /* first count how many arguments there are */ |
| 259 | |
| 260 | p0 = arg_string; |
| 261 | while (*p0 != '\0') |
| 262 | { |
| 263 | if (*(p0 = skip_white_space (p0)) == '\0') |
| 264 | break; |
| 265 | p0 = find_white_space (p0); |
| 266 | arg_count++; |
| 267 | } |
| 268 | |
| 269 | arg_struct->arg_array_len = arg_count; |
| 270 | arg_struct->arg_array_val = (char **) xmalloc ((arg_count + 1) |
| 271 | * sizeof (char *)); |
| 272 | |
| 273 | /* now copy argument strings into arg_struct. */ |
| 274 | |
| 275 | while (*(arg_string = skip_white_space (arg_string))) |
| 276 | { |
| 277 | p0 = find_white_space (arg_string); |
| 278 | arg_struct->arg_array_val[arg_index++] = savestring (arg_string, |
| 279 | p0 - arg_string); |
| 280 | arg_string = p0; |
| 281 | } |
| 282 | |
| 283 | arg_struct->arg_array_val[arg_count] = NULL; |
| 284 | } |
| 285 | |
| 286 | /* Advance a string pointer across whitespace and return a pointer |
| 287 | to the first non-white character. */ |
| 288 | |
| 289 | static char * |
| 290 | skip_white_space (p) |
| 291 | register char *p; |
| 292 | { |
| 293 | while (*p == ' ' || *p == '\t') |
| 294 | p++; |
| 295 | return p; |
| 296 | } |
| 297 | |
| 298 | /* Search for the first unquoted whitespace character in a string. |
| 299 | Returns a pointer to the character, or to the null terminator |
| 300 | if no whitespace is found. */ |
| 301 | |
| 302 | static char * |
| 303 | find_white_space (p) |
| 304 | register char *p; |
| 305 | { |
| 306 | register int c; |
| 307 | |
| 308 | while ((c = *p) != ' ' && c != '\t' && c) |
| 309 | { |
| 310 | if (c == '\'' || c == '"') |
| 311 | { |
| 312 | while (*++p != c && *p) |
| 313 | { |
| 314 | if (*p == '\\') |
| 315 | p++; |
| 316 | } |
| 317 | if (!*p) |
| 318 | break; |
| 319 | } |
| 320 | p++; |
| 321 | } |
| 322 | return p; |
| 323 | } |
| 324 | |
| 325 | /* Poll the VxWorks target system for an event related |
| 326 | to the debugged task. |
| 327 | Returns -1 if remote wait failed, task status otherwise. */ |
| 328 | |
| 329 | static int |
| 330 | net_wait (pEvent) |
| 331 | RDB_EVENT *pEvent; |
| 332 | { |
| 333 | int pid; |
| 334 | enum clnt_stat status; |
| 335 | |
| 336 | bzero ((char *) pEvent, sizeof (RDB_EVENT)); |
| 337 | |
| 338 | pid = inferior_pid; |
| 339 | status = net_clnt_call (PROCESS_WAIT, xdr_int, &pid, xdr_RDB_EVENT, pEvent); |
| 340 | |
| 341 | return (status == RPC_SUCCESS)? pEvent->status: -1; |
| 342 | } |
| 343 | |
| 344 | /* Suspend the remote task. |
| 345 | Returns -1 if suspend fails on target system, 0 otherwise. */ |
| 346 | |
| 347 | static int |
| 348 | net_quit () |
| 349 | { |
| 350 | int pid; |
| 351 | int quit_status; |
| 352 | enum clnt_stat status; |
| 353 | |
| 354 | quit_status = 0; |
| 355 | |
| 356 | /* don't let rdbTask suspend itself by passing a pid of 0 */ |
| 357 | |
| 358 | if ((pid = inferior_pid) == 0) |
| 359 | return -1; |
| 360 | |
| 361 | status = net_clnt_call (VX_TASK_SUSPEND, xdr_int, &pid, xdr_int, |
| 362 | &quit_status); |
| 363 | |
| 364 | return (status == RPC_SUCCESS)? quit_status: -1; |
| 365 | } |
| 366 | |
| 367 | /* Read a register or registers from the remote system. */ |
| 368 | |
| 369 | static void |
| 370 | vx_read_register (regno) |
| 371 | int regno; |
| 372 | { |
| 373 | int status; |
| 374 | Rptrace ptrace_in; |
| 375 | Ptrace_return ptrace_out; |
| 376 | C_bytes in_data; |
| 377 | C_bytes out_data; |
| 378 | extern char registers[]; |
| 379 | |
| 380 | bzero ((char *) &ptrace_in, sizeof (ptrace_in)); |
| 381 | bzero ((char *) &ptrace_out, sizeof (ptrace_out)); |
| 382 | |
| 383 | /* FIXME, eventually only get the ones we need. */ |
| 384 | registers_fetched (); |
| 385 | |
| 386 | ptrace_in.pid = inferior_pid; |
| 387 | ptrace_out.info.more_data = (caddr_t) &out_data; |
| 388 | #ifndef I80960 |
| 389 | out_data.len = 18 * REGISTER_RAW_SIZE (0); /* FIXME 68k hack */ |
| 390 | #else |
| 391 | out_data.len = (16 + 16 + 3) * REGISTER_RAW_SIZE (0); |
| 392 | #endif |
| 393 | out_data.bytes = (caddr_t) registers; |
| 394 | |
| 395 | status = net_ptrace_clnt_call (PTRACE_GETREGS, &ptrace_in, &ptrace_out); |
| 396 | if (status) |
| 397 | error (rpcerr); |
| 398 | if (ptrace_out.status == -1) |
| 399 | { |
| 400 | errno = ptrace_out.errno; |
| 401 | perror_with_name ("net_ptrace_clnt_call(PTRACE_GETREGS)"); |
| 402 | } |
| 403 | |
| 404 | #ifdef I80960 |
| 405 | |
| 406 | { |
| 407 | /* If the target has floating point registers, fetch them. |
| 408 | Otherwise, zero the floating point register values in |
| 409 | registers[] for good measure, even though we might not |
| 410 | need to. */ |
| 411 | /* @@ Can't use this -- the rdb library for the 960 target |
| 412 | doesn't support setting or retrieving FP regs. KR */ |
| 413 | #if 0 |
| 414 | struct fp_status inferior_fp_registers; |
| 415 | |
| 416 | if (target_has_fp) |
| 417 | { |
| 418 | ptrace_in.pid = inferior_pid; |
| 419 | ptrace_out.info.more_data = (caddr_t) &inferior_fp_registers; |
| 420 | status = net_ptrace_clnt_call (PTRACE_GETFPREGS, |
| 421 | &ptrace_in, &ptrace_out); |
| 422 | if (status) |
| 423 | error (rpcerr); |
| 424 | if (ptrace_out.status == -1) |
| 425 | { |
| 426 | errno = ptrace_out.errno; |
| 427 | perror_with_name ("net_ptrace_clnt_call(PTRACE_GETFPREGS)"); |
| 428 | } |
| 429 | |
| 430 | bcopy (&inferior_fp_registers, ®isters[REGISTER_BYTE (FP0_REGNUM)], |
| 431 | REGISTER_RAW_SIZE (FP0_REGNUM) * 4); |
| 432 | } |
| 433 | else |
| 434 | { |
| 435 | bzero ((char *) ®isters[REGISTER_BYTE (FP0_REGNUM)], |
| 436 | REGISTER_RAW_SIZE (FP0_REGNUM) * 4); |
| 437 | } |
| 438 | #endif |
| 439 | } |
| 440 | #else /* not 960, thus must be 68000: FIXME! */ |
| 441 | |
| 442 | if (target_has_fp) |
| 443 | { |
| 444 | ptrace_in.pid = inferior_pid; |
| 445 | ptrace_out.info.more_data = (caddr_t) &out_data; |
| 446 | out_data.len = 8 * REGISTER_RAW_SIZE (FP0_REGNUM) /* FIXME */ |
| 447 | + (3 * sizeof (REGISTER_TYPE)); |
| 448 | out_data.bytes = (caddr_t) ®isters[REGISTER_BYTE (FP0_REGNUM)]; |
| 449 | |
| 450 | status = net_ptrace_clnt_call (PTRACE_GETFPREGS, &ptrace_in, &ptrace_out); |
| 451 | if (status) |
| 452 | error (rpcerr); |
| 453 | if (ptrace_out.status == -1) |
| 454 | { |
| 455 | errno = ptrace_out.errno; |
| 456 | perror_with_name ("net_ptrace_clnt_call(PTRACE_GETFPREGS)"); |
| 457 | } |
| 458 | } |
| 459 | else |
| 460 | { |
| 461 | bzero (®isters[REGISTER_BYTE (FP0_REGNUM)], |
| 462 | 8 * REGISTER_RAW_SIZE (FP0_REGNUM)); |
| 463 | bzero (®isters[REGISTER_BYTE (FPC_REGNUM)], |
| 464 | 3 * sizeof (REGISTER_TYPE)); |
| 465 | } |
| 466 | #endif /* various architectures */ |
| 467 | } |
| 468 | |
| 469 | /* Prepare to store registers. Since we will store all of them, |
| 470 | read out their current values now. */ |
| 471 | |
| 472 | static void |
| 473 | vx_prepare_to_store () |
| 474 | { |
| 475 | vx_read_register (-1); |
| 476 | } |
| 477 | |
| 478 | |
| 479 | /* Store our register values back into the inferior. |
| 480 | If REGNO is -1, do this for all registers. |
| 481 | Otherwise, REGNO specifies which register (so we can save time). */ |
| 482 | /* FIXME, look at REGNO to save time here */ |
| 483 | |
| 484 | static void |
| 485 | vx_write_register (regno) |
| 486 | int regno; |
| 487 | { |
| 488 | C_bytes in_data; |
| 489 | C_bytes out_data; |
| 490 | extern char registers[]; |
| 491 | int status; |
| 492 | Rptrace ptrace_in; |
| 493 | Ptrace_return ptrace_out; |
| 494 | |
| 495 | bzero ((char *) &ptrace_in, sizeof (ptrace_in)); |
| 496 | bzero ((char *) &ptrace_out, sizeof (ptrace_out)); |
| 497 | |
| 498 | ptrace_in.pid = inferior_pid; |
| 499 | ptrace_in.info.ttype = DATA; |
| 500 | ptrace_in.info.more_data = (caddr_t) &in_data; |
| 501 | |
| 502 | in_data.bytes = registers; |
| 503 | |
| 504 | #ifdef I80960 |
| 505 | |
| 506 | in_data.len = (16 + 16 + 3) * sizeof (REGISTER_TYPE); |
| 507 | |
| 508 | #else /* not 960 -- assume 68k -- FIXME */ |
| 509 | |
| 510 | in_data.len = 18 * sizeof (REGISTER_TYPE); |
| 511 | |
| 512 | #endif /* Different register sets */ |
| 513 | |
| 514 | /* XXX change second param to be a proc number */ |
| 515 | status = net_ptrace_clnt_call (PTRACE_SETREGS, &ptrace_in, &ptrace_out); |
| 516 | if (status) |
| 517 | error (rpcerr); |
| 518 | if (ptrace_out.status == -1) |
| 519 | { |
| 520 | errno = ptrace_out.errno; |
| 521 | perror_with_name ("net_ptrace_clnt_call(PTRACE_SETREGS)"); |
| 522 | } |
| 523 | |
| 524 | /* Store floating point registers if the target has them. */ |
| 525 | |
| 526 | if (target_has_fp) |
| 527 | { |
| 528 | ptrace_in.pid = inferior_pid; |
| 529 | ptrace_in.info.ttype = DATA; |
| 530 | ptrace_in.info.more_data = (caddr_t) &in_data; |
| 531 | |
| 532 | |
| 533 | #ifdef I80960 |
| 534 | #if 0 /* @@ Not supported by target. */ |
| 535 | in_data.bytes = ®isters[REGISTER_BYTE (FP0_REGNUM)]; |
| 536 | in_data.len = 4 * REGISTER_RAW_SIZE (FP0_REGNUM); |
| 537 | #endif |
| 538 | #else /* not 960 -- assume 68k -- FIXME */ |
| 539 | |
| 540 | in_data.bytes = ®isters[REGISTER_BYTE (FP0_REGNUM)]; |
| 541 | in_data.len = (8 * REGISTER_RAW_SIZE (FP0_REGNUM) |
| 542 | + (3 * sizeof (REGISTER_TYPE))); |
| 543 | |
| 544 | #endif /* Different register sets */ |
| 545 | |
| 546 | status = net_ptrace_clnt_call (PTRACE_SETFPREGS, &ptrace_in, &ptrace_out); |
| 547 | if (status) |
| 548 | error (rpcerr); |
| 549 | if (ptrace_out.status == -1) |
| 550 | { |
| 551 | errno = ptrace_out.errno; |
| 552 | perror_with_name ("net_ptrace_clnt_call(PTRACE_SETFPREGS)"); |
| 553 | } |
| 554 | } |
| 555 | } |
| 556 | |
| 557 | /* Copy LEN bytes to or from remote inferior's memory starting at MEMADDR |
| 558 | to debugger memory starting at MYADDR. WRITE is true if writing to the |
| 559 | inferior. |
| 560 | Result is the number of bytes written or read (zero if error). The |
| 561 | protocol allows us to return a negative count, indicating that we can't |
| 562 | handle the current address but can handle one N bytes further, but |
| 563 | vxworks doesn't give us that information. */ |
| 564 | |
| 565 | static int |
| 566 | vx_xfer_memory (memaddr, myaddr, len, write, target) |
| 567 | CORE_ADDR memaddr; |
| 568 | char *myaddr; |
| 569 | int len; |
| 570 | int write; |
| 571 | struct target_ops *target; /* ignored */ |
| 572 | { |
| 573 | int status; |
| 574 | Rptrace ptrace_in; |
| 575 | Ptrace_return ptrace_out; |
| 576 | C_bytes data; |
| 577 | |
| 578 | bzero ((char *) &ptrace_in, sizeof (ptrace_in)); |
| 579 | bzero ((char *) &ptrace_out, sizeof (ptrace_out)); |
| 580 | |
| 581 | ptrace_in.pid = inferior_pid; /* XXX pid unnecessary for READDATA */ |
| 582 | ptrace_in.addr = (int) memaddr; /* Where from */ |
| 583 | ptrace_in.data = len; /* How many bytes */ |
| 584 | |
| 585 | if (write) |
| 586 | { |
| 587 | ptrace_in.info.ttype = DATA; |
| 588 | ptrace_in.info.more_data = (caddr_t) &data; |
| 589 | |
| 590 | data.bytes = (caddr_t) myaddr; /* Where from */ |
| 591 | data.len = len; /* How many bytes (again, for XDR) */ |
| 592 | |
| 593 | /* XXX change second param to be a proc number */ |
| 594 | status = net_ptrace_clnt_call (PTRACE_WRITEDATA, &ptrace_in, &ptrace_out); |
| 595 | } |
| 596 | else |
| 597 | { |
| 598 | ptrace_out.info.more_data = (caddr_t) &data; |
| 599 | data.bytes = myaddr; /* Where to */ |
| 600 | data.len = len; /* How many (again, for XDR) */ |
| 601 | |
| 602 | /* XXX change second param to be a proc number */ |
| 603 | status = net_ptrace_clnt_call (PTRACE_READDATA, &ptrace_in, &ptrace_out); |
| 604 | } |
| 605 | |
| 606 | if (status) |
| 607 | error (rpcerr); |
| 608 | if (ptrace_out.status == -1) |
| 609 | { |
| 610 | return 0; /* No bytes moved */ |
| 611 | } |
| 612 | return len; /* Moved *all* the bytes */ |
| 613 | } |
| 614 | |
| 615 | static void |
| 616 | vx_files_info () |
| 617 | { |
| 618 | printf ("\tAttached to host `%s'", vx_host); |
| 619 | printf (", which has %sfloating point", target_has_fp? "": "no "); |
| 620 | printf (".\n"); |
| 621 | } |
| 622 | |
| 623 | static void |
| 624 | vx_run_files_info () |
| 625 | { |
| 626 | printf ("\tRunning %s VxWorks process %s", |
| 627 | vx_running? "child": "attached", |
| 628 | local_hex_string(inferior_pid)); |
| 629 | if (vx_running) |
| 630 | printf (", function `%s'", vx_running); |
| 631 | printf(".\n"); |
| 632 | } |
| 633 | |
| 634 | static void |
| 635 | vx_resume (step, siggnal) |
| 636 | int step; |
| 637 | int siggnal; |
| 638 | { |
| 639 | int status; |
| 640 | Rptrace ptrace_in; |
| 641 | Ptrace_return ptrace_out; |
| 642 | |
| 643 | if (siggnal != 0 && siggnal != stop_signal) |
| 644 | error ("Cannot send signals to VxWorks processes"); |
| 645 | |
| 646 | bzero ((char *) &ptrace_in, sizeof (ptrace_in)); |
| 647 | bzero ((char *) &ptrace_out, sizeof (ptrace_out)); |
| 648 | |
| 649 | ptrace_in.pid = inferior_pid; |
| 650 | ptrace_in.addr = 1; /* Target side insists on this, or it panics. */ |
| 651 | |
| 652 | /* XXX change second param to be a proc number */ |
| 653 | status = net_ptrace_clnt_call (step? PTRACE_SINGLESTEP: PTRACE_CONT, |
| 654 | &ptrace_in, &ptrace_out); |
| 655 | if (status) |
| 656 | error (rpcerr); |
| 657 | if (ptrace_out.status == -1) |
| 658 | { |
| 659 | errno = ptrace_out.errno; |
| 660 | perror_with_name ("Resuming remote process"); |
| 661 | } |
| 662 | } |
| 663 | |
| 664 | static void |
| 665 | vx_mourn_inferior () |
| 666 | { |
| 667 | pop_target (); /* Pop back to no-child state */ |
| 668 | generic_mourn_inferior (); |
| 669 | } |
| 670 | |
| 671 | \f |
| 672 | /* This function allows the addition of incrementally linked object files. */ |
| 673 | |
| 674 | static void |
| 675 | vx_load_command (arg_string, from_tty) |
| 676 | char* arg_string; |
| 677 | int from_tty; |
| 678 | { |
| 679 | CORE_ADDR text_addr; |
| 680 | CORE_ADDR data_addr; |
| 681 | CORE_ADDR bss_addr; |
| 682 | |
| 683 | if (arg_string == 0) |
| 684 | error ("The load command takes a file name"); |
| 685 | |
| 686 | arg_string = tilde_expand (arg_string); |
| 687 | make_cleanup (free, arg_string); |
| 688 | |
| 689 | dont_repeat (); |
| 690 | |
| 691 | QUIT; |
| 692 | immediate_quit++; |
| 693 | if (net_load (arg_string, &text_addr, &data_addr, &bss_addr) == -1) |
| 694 | error ("Load failed on target machine"); |
| 695 | immediate_quit--; |
| 696 | |
| 697 | /* FIXME, for now we ignore data_addr and bss_addr. */ |
| 698 | symbol_file_add (arg_string, from_tty, text_addr, 0, 0, 0); |
| 699 | } |
| 700 | |
| 701 | #ifdef FIXME /* Not ready for prime time */ |
| 702 | /* Single step the target program at the source or machine level. |
| 703 | Takes an error exit if rpc fails. |
| 704 | Returns -1 if remote single-step operation fails, else 0. */ |
| 705 | |
| 706 | static int |
| 707 | net_step () |
| 708 | { |
| 709 | enum clnt_stat status; |
| 710 | int step_status; |
| 711 | SOURCE_STEP source_step; |
| 712 | |
| 713 | source_step.taskId = inferior_pid; |
| 714 | |
| 715 | if (step_range_end) |
| 716 | { |
| 717 | source_step.startAddr = step_range_start; |
| 718 | source_step.endAddr = step_range_end; |
| 719 | } |
| 720 | else |
| 721 | { |
| 722 | source_step.startAddr = 0; |
| 723 | source_step.endAddr = 0; |
| 724 | } |
| 725 | |
| 726 | status = net_clnt_call (VX_SOURCE_STEP, xdr_SOURCE_STEP, &source_step, |
| 727 | xdr_int, &step_status); |
| 728 | |
| 729 | if (status == RPC_SUCCESS) |
| 730 | return step_status; |
| 731 | else |
| 732 | error (rpcerr); |
| 733 | } |
| 734 | #endif |
| 735 | |
| 736 | /* Emulate ptrace using RPC calls to the VxWorks target system. |
| 737 | Returns nonzero (-1) if RPC status to VxWorks is bad, 0 otherwise. */ |
| 738 | |
| 739 | static int |
| 740 | net_ptrace_clnt_call (request, pPtraceIn, pPtraceOut) |
| 741 | enum ptracereq request; |
| 742 | Rptrace *pPtraceIn; |
| 743 | Ptrace_return *pPtraceOut; |
| 744 | { |
| 745 | enum clnt_stat status; |
| 746 | |
| 747 | status = net_clnt_call (request, xdr_rptrace, pPtraceIn, xdr_ptrace_return, |
| 748 | pPtraceOut); |
| 749 | |
| 750 | if (status != RPC_SUCCESS) |
| 751 | return -1; |
| 752 | |
| 753 | return 0; |
| 754 | } |
| 755 | |
| 756 | /* Query the target for the name of the file from which VxWorks was |
| 757 | booted. pBootFile is the address of a pointer to the buffer to |
| 758 | receive the file name; if the pointer pointed to by pBootFile is |
| 759 | NULL, memory for the buffer will be allocated by XDR. |
| 760 | Returns -1 if rpc failed, 0 otherwise. */ |
| 761 | |
| 762 | static int |
| 763 | net_get_boot_file (pBootFile) |
| 764 | char **pBootFile; |
| 765 | { |
| 766 | enum clnt_stat status; |
| 767 | |
| 768 | status = net_clnt_call (VX_BOOT_FILE_INQ, xdr_void, (char *) 0, |
| 769 | xdr_wrapstring, pBootFile); |
| 770 | return (status == RPC_SUCCESS) ? 0 : -1; |
| 771 | } |
| 772 | |
| 773 | /* Fetch a list of loaded object modules from the VxWorks target. |
| 774 | Returns -1 if rpc failed, 0 otherwise |
| 775 | There's no way to check if the returned loadTable is correct. |
| 776 | VxWorks doesn't check it. */ |
| 777 | |
| 778 | static int |
| 779 | net_get_symbols (pLoadTable) |
| 780 | ldtabl *pLoadTable; /* return pointer to ldtabl here */ |
| 781 | { |
| 782 | enum clnt_stat status; |
| 783 | |
| 784 | bzero ((char *) pLoadTable, sizeof (struct ldtabl)); |
| 785 | |
| 786 | status = net_clnt_call (VX_STATE_INQ, xdr_void, 0, xdr_ldtabl, pLoadTable); |
| 787 | return (status == RPC_SUCCESS) ? 0 : -1; |
| 788 | } |
| 789 | |
| 790 | /* Look up a symbol in the VxWorks target's symbol table. |
| 791 | Returns status of symbol read on target side (0=success, -1=fail) |
| 792 | Returns -1 and complain()s if rpc fails. */ |
| 793 | |
| 794 | struct complaint cant_contact_target = |
| 795 | {"Lost contact with VxWorks target", 0, 0}; |
| 796 | |
| 797 | static int |
| 798 | vx_lookup_symbol (name, pAddr) |
| 799 | char *name; /* symbol name */ |
| 800 | CORE_ADDR *pAddr; |
| 801 | { |
| 802 | enum clnt_stat status; |
| 803 | SYMBOL_ADDR symbolAddr; |
| 804 | |
| 805 | *pAddr = 0; |
| 806 | bzero ((char *) &symbolAddr, sizeof (symbolAddr)); |
| 807 | |
| 808 | status = net_clnt_call (VX_SYMBOL_INQ, xdr_wrapstring, &name, |
| 809 | xdr_SYMBOL_ADDR, &symbolAddr); |
| 810 | if (status != RPC_SUCCESS) { |
| 811 | complain (&cant_contact_target, 0); |
| 812 | return -1; |
| 813 | } |
| 814 | |
| 815 | *pAddr = symbolAddr.addr; |
| 816 | return symbolAddr.status; |
| 817 | } |
| 818 | |
| 819 | /* Check to see if the VxWorks target has a floating point coprocessor. |
| 820 | Returns 1 if target has floating point processor, 0 otherwise. |
| 821 | Calls error() if rpc fails. */ |
| 822 | |
| 823 | static int |
| 824 | net_check_for_fp () |
| 825 | { |
| 826 | enum clnt_stat status; |
| 827 | bool_t fp = 0; /* true if fp processor is present on target board */ |
| 828 | |
| 829 | status = net_clnt_call (VX_FP_INQUIRE, xdr_void, 0, xdr_bool, &fp); |
| 830 | if (status != RPC_SUCCESS) |
| 831 | error (rpcerr); |
| 832 | |
| 833 | return (int) fp; |
| 834 | } |
| 835 | |
| 836 | /* Establish an RPC connection with the VxWorks target system. |
| 837 | Calls error () if unable to establish connection. */ |
| 838 | |
| 839 | static void |
| 840 | net_connect (host) |
| 841 | char *host; |
| 842 | { |
| 843 | struct sockaddr_in destAddr; |
| 844 | struct hostent *destHost; |
| 845 | |
| 846 | /* get the internet address for the given host */ |
| 847 | |
| 848 | if ((destHost = (struct hostent *) gethostbyname (host)) == NULL) |
| 849 | error ("Invalid hostname. Couldn't find remote host address."); |
| 850 | |
| 851 | bzero (&destAddr, sizeof (destAddr)); |
| 852 | |
| 853 | destAddr.sin_addr.s_addr = * (u_long *) destHost->h_addr; |
| 854 | destAddr.sin_family = AF_INET; |
| 855 | destAddr.sin_port = 0; /* set to actual port that remote |
| 856 | ptrace is listening on. */ |
| 857 | |
| 858 | /* Create a tcp client transport on which to issue |
| 859 | calls to the remote ptrace server. */ |
| 860 | |
| 861 | ptraceSock = RPC_ANYSOCK; |
| 862 | pClient = clnttcp_create (&destAddr, RDBPROG, RDBVERS, &ptraceSock, 0, 0); |
| 863 | /* FIXME, here is where we deal with different version numbers of the proto */ |
| 864 | |
| 865 | if (pClient == NULL) |
| 866 | { |
| 867 | clnt_pcreateerror ("\tnet_connect"); |
| 868 | error ("Couldn't connect to remote target."); |
| 869 | } |
| 870 | } |
| 871 | \f |
| 872 | /* Sleep for the specified number of milliseconds |
| 873 | * (assumed to be less than 1000). |
| 874 | * If select () is interrupted, returns immediately; |
| 875 | * takes an error exit if select () fails for some other reason. |
| 876 | */ |
| 877 | |
| 878 | static void |
| 879 | sleep_ms (ms) |
| 880 | long ms; |
| 881 | { |
| 882 | struct timeval select_timeout; |
| 883 | int status; |
| 884 | |
| 885 | select_timeout.tv_sec = 0; |
| 886 | select_timeout.tv_usec = ms * 1000; |
| 887 | |
| 888 | status = select (0, (fd_set *) 0, (fd_set *) 0, (fd_set *) 0, &select_timeout); |
| 889 | |
| 890 | if (status < 0 && errno != EINTR) |
| 891 | perror_with_name ("select"); |
| 892 | } |
| 893 | |
| 894 | /* Wait for control to return from inferior to debugger. |
| 895 | If inferior gets a signal, we may decide to start it up again |
| 896 | instead of returning. That is why there is a loop in this function. |
| 897 | When this function actually returns it means the inferior |
| 898 | should be left stopped and GDB should read more commands. */ |
| 899 | |
| 900 | /* For network debugging with VxWorks. |
| 901 | * VxWorks knows when tasks hit breakpoints, receive signals, exit, etc, |
| 902 | * so vx_wait() receives this information directly from |
| 903 | * VxWorks instead of trying to figure out what happenned via a wait() call. |
| 904 | */ |
| 905 | |
| 906 | static int |
| 907 | vx_wait (status) |
| 908 | int *status; |
| 909 | { |
| 910 | register int pid; |
| 911 | WAITTYPE w; |
| 912 | RDB_EVENT rdbEvent; |
| 913 | int quit_failed; |
| 914 | |
| 915 | do |
| 916 | { |
| 917 | /* If CTRL-C is hit during this loop, |
| 918 | suspend the inferior process. */ |
| 919 | |
| 920 | quit_failed = 0; |
| 921 | if (quit_flag) |
| 922 | { |
| 923 | quit_failed = (net_quit () == -1); |
| 924 | quit_flag = 0; |
| 925 | } |
| 926 | |
| 927 | /* If a net_quit () or net_wait () call has failed, |
| 928 | allow the user to break the connection with the target. |
| 929 | We can't simply error () out of this loop, since the |
| 930 | data structures representing the state of the inferior |
| 931 | are in an inconsistent state. */ |
| 932 | |
| 933 | if (quit_failed || net_wait (&rdbEvent) == -1) |
| 934 | { |
| 935 | terminal_ours (); |
| 936 | if (query ("Can't %s. Disconnect from target system? ", |
| 937 | (quit_failed) ? "suspend remote task" |
| 938 | : "get status of remote task")) |
| 939 | { |
| 940 | target_mourn_inferior(); |
| 941 | error ("Use the \"target\" command to reconnect."); |
| 942 | } |
| 943 | else |
| 944 | { |
| 945 | terminal_inferior (); |
| 946 | continue; |
| 947 | } |
| 948 | } |
| 949 | |
| 950 | pid = rdbEvent.taskId; |
| 951 | if (pid == 0) |
| 952 | { |
| 953 | sleep_ms (200); /* FIXME Don't kill the network too badly */ |
| 954 | } |
| 955 | else if (pid != inferior_pid) |
| 956 | fatal ("Bad pid for debugged task: %s\n", local_hex_string(pid)); |
| 957 | } while (pid == 0); |
| 958 | |
| 959 | /* FIXME, eventually do more then SIGTRAP on everything... */ |
| 960 | switch (rdbEvent.eventType) |
| 961 | { |
| 962 | case EVENT_EXIT: |
| 963 | WSETEXIT (w, 0); |
| 964 | /* FIXME is it possible to distinguish between a |
| 965 | XXX normal vs abnormal exit in VxWorks? */ |
| 966 | break; |
| 967 | |
| 968 | case EVENT_START: /* Task was just started. */ |
| 969 | WSETSTOP (w, SIGTRAP); |
| 970 | break; |
| 971 | |
| 972 | case EVENT_STOP: |
| 973 | WSETSTOP (w, SIGTRAP); |
| 974 | /* XXX was it stopped by a signal? act accordingly */ |
| 975 | break; |
| 976 | |
| 977 | case EVENT_BREAK: /* Breakpoint was hit. */ |
| 978 | WSETSTOP (w, SIGTRAP); |
| 979 | break; |
| 980 | |
| 981 | case EVENT_SUSPEND: /* Task was suspended, probably by ^C. */ |
| 982 | WSETSTOP (w, SIGINT); |
| 983 | break; |
| 984 | |
| 985 | case EVENT_BUS_ERR: /* Task made evil nasty reference. */ |
| 986 | WSETSTOP (w, SIGBUS); |
| 987 | break; |
| 988 | |
| 989 | case EVENT_ZERO_DIV: /* Division by zero */ |
| 990 | WSETSTOP (w, SIGFPE); /* Like Unix, call it a float exception. */ |
| 991 | break; |
| 992 | |
| 993 | case EVENT_SIGNAL: |
| 994 | /* The target is not running Unix, and its |
| 995 | faults/traces do not map nicely into Unix signals. |
| 996 | Make sure they do not get confused with Unix signals |
| 997 | by numbering them with values higher than the highest |
| 998 | legal Unix signal. code in the arch-dependent PRINT_RANDOM_SIGNAL |
| 999 | routine will interpret the value for wait_for_inferior. */ |
| 1000 | WSETSTOP (w, rdbEvent.sigType + NSIG); |
| 1001 | break; |
| 1002 | } /* switch */ |
| 1003 | *status = *(int *)&w; /* Grumble union wait crap Grumble */ |
| 1004 | return pid; |
| 1005 | } |
| 1006 | \f |
| 1007 | static int |
| 1008 | symbol_stub (arg) |
| 1009 | char *arg; |
| 1010 | { |
| 1011 | symbol_file_command (arg, 0); |
| 1012 | return 1; |
| 1013 | } |
| 1014 | |
| 1015 | static int |
| 1016 | add_symbol_stub (arg) |
| 1017 | char *arg; |
| 1018 | { |
| 1019 | struct ldfile *pLoadFile = (struct ldfile *)arg; |
| 1020 | |
| 1021 | printf("\t%s: ", pLoadFile->name); |
| 1022 | symbol_file_add (pLoadFile->name, 0, pLoadFile->txt_addr, 0, 0, 0); |
| 1023 | printf ("ok\n"); |
| 1024 | return 1; |
| 1025 | } |
| 1026 | /* Target command for VxWorks target systems. |
| 1027 | |
| 1028 | Used in vxgdb. Takes the name of a remote target machine |
| 1029 | running vxWorks and connects to it to initialize remote network |
| 1030 | debugging. */ |
| 1031 | |
| 1032 | static void |
| 1033 | vx_open (args, from_tty) |
| 1034 | char *args; |
| 1035 | int from_tty; |
| 1036 | { |
| 1037 | extern int close (); |
| 1038 | char *bootFile; |
| 1039 | extern char *source_path; |
| 1040 | struct ldtabl loadTable; |
| 1041 | struct ldfile *pLoadFile; |
| 1042 | int i; |
| 1043 | extern CLIENT *pClient; |
| 1044 | |
| 1045 | if (!args) |
| 1046 | error_no_arg ("target machine name"); |
| 1047 | |
| 1048 | target_preopen (from_tty); |
| 1049 | |
| 1050 | unpush_target (&vx_ops); |
| 1051 | printf ("Attaching remote machine across net...\n"); |
| 1052 | fflush (stdout); |
| 1053 | |
| 1054 | /* Allow the user to kill the connect attempt by typing ^C. |
| 1055 | Wait until the call to target_has_fp () completes before |
| 1056 | disallowing an immediate quit, since even if net_connect () |
| 1057 | is successful, the remote debug server might be hung. */ |
| 1058 | |
| 1059 | immediate_quit++; |
| 1060 | |
| 1061 | net_connect (args); |
| 1062 | target_has_fp = net_check_for_fp (); |
| 1063 | printf_filtered ("Connected to %s.\n", args); |
| 1064 | |
| 1065 | immediate_quit--; |
| 1066 | |
| 1067 | push_target (&vx_ops); |
| 1068 | |
| 1069 | /* Save a copy of the target host's name. */ |
| 1070 | vx_host = savestring (args, strlen (args)); |
| 1071 | |
| 1072 | /* Find out the name of the file from which the target was booted |
| 1073 | and load its symbol table. */ |
| 1074 | |
| 1075 | printf_filtered ("Looking in Unix path for all loaded modules:\n"); |
| 1076 | bootFile = NULL; |
| 1077 | if (!net_get_boot_file (&bootFile)) |
| 1078 | { |
| 1079 | if (*bootFile) { |
| 1080 | printf_filtered ("\t%s: ", bootFile); |
| 1081 | if (catch_errors (symbol_stub, bootFile, |
| 1082 | "Error while reading symbols from boot file:\n")) |
| 1083 | puts_filtered ("ok\n"); |
| 1084 | } else if (from_tty) |
| 1085 | printf ("VxWorks kernel symbols not loaded.\n"); |
| 1086 | } |
| 1087 | else |
| 1088 | error ("Can't retrieve boot file name from target machine."); |
| 1089 | |
| 1090 | clnt_freeres (pClient, xdr_wrapstring, &bootFile); |
| 1091 | |
| 1092 | if (net_get_symbols (&loadTable) != 0) |
| 1093 | error ("Can't read loaded modules from target machine"); |
| 1094 | |
| 1095 | i = 0-1; |
| 1096 | while (++i < loadTable.tbl_size) |
| 1097 | { |
| 1098 | QUIT; /* FIXME, avoids clnt_freeres below: mem leak */ |
| 1099 | pLoadFile = &loadTable.tbl_ent [i]; |
| 1100 | #ifdef WRS_ORIG |
| 1101 | { |
| 1102 | register int desc; |
| 1103 | struct cleanup *old_chain; |
| 1104 | char *fullname = NULL; |
| 1105 | |
| 1106 | desc = openp (source_path, 0, pLoadFile->name, O_RDONLY, 0, &fullname); |
| 1107 | if (desc < 0) |
| 1108 | perror_with_name (pLoadFile->name); |
| 1109 | old_chain = make_cleanup (close, desc); |
| 1110 | add_file_at_addr (fullname, desc, pLoadFile->txt_addr, pLoadFile->data_addr, |
| 1111 | pLoadFile->bss_addr); |
| 1112 | do_cleanups (old_chain); |
| 1113 | } |
| 1114 | #else |
| 1115 | /* Botches, FIXME: |
| 1116 | (1) Searches the PATH, not the source path. |
| 1117 | (2) data and bss are assumed to be at the usual offsets from text. */ |
| 1118 | catch_errors (add_symbol_stub, (char *)pLoadFile, (char *)0); |
| 1119 | #endif |
| 1120 | } |
| 1121 | printf_filtered ("Done.\n"); |
| 1122 | |
| 1123 | clnt_freeres (pClient, xdr_ldtabl, &loadTable); |
| 1124 | } |
| 1125 | \f |
| 1126 | /* attach_command -- |
| 1127 | takes a task started up outside of gdb and ``attaches'' to it. |
| 1128 | This stops it cold in its tracks and allows us to start tracing it. */ |
| 1129 | |
| 1130 | static void |
| 1131 | vx_attach (args, from_tty) |
| 1132 | char *args; |
| 1133 | int from_tty; |
| 1134 | { |
| 1135 | int pid; |
| 1136 | char *cptr = 0; |
| 1137 | Rptrace ptrace_in; |
| 1138 | Ptrace_return ptrace_out; |
| 1139 | int status; |
| 1140 | |
| 1141 | dont_repeat(); |
| 1142 | |
| 1143 | if (!args) |
| 1144 | error_no_arg ("process-id to attach"); |
| 1145 | |
| 1146 | pid = strtol (args, &cptr, 0); |
| 1147 | if ((cptr == args) || (*cptr != '\0')) |
| 1148 | error ("Invalid process-id -- give a single number in decimal or 0xhex"); |
| 1149 | |
| 1150 | if (from_tty) |
| 1151 | printf ("Attaching pid %s.\n", local_hex_string(pid)); |
| 1152 | |
| 1153 | bzero ((char *)&ptrace_in, sizeof (ptrace_in)); |
| 1154 | bzero ((char *)&ptrace_out, sizeof (ptrace_out)); |
| 1155 | ptrace_in.pid = pid; |
| 1156 | |
| 1157 | status = net_ptrace_clnt_call (PTRACE_ATTACH, &ptrace_in, &ptrace_out); |
| 1158 | if (status == -1) |
| 1159 | error (rpcerr); |
| 1160 | if (ptrace_out.status == -1) |
| 1161 | { |
| 1162 | errno = ptrace_out.errno; |
| 1163 | perror_with_name ("Attaching remote process"); |
| 1164 | } |
| 1165 | |
| 1166 | /* It worked... */ |
| 1167 | push_target (&vx_run_ops); |
| 1168 | inferior_pid = pid; |
| 1169 | vx_running = 0; |
| 1170 | |
| 1171 | mark_breakpoints_out (); |
| 1172 | |
| 1173 | /* Set up the "saved terminal modes" of the inferior |
| 1174 | based on what modes we are starting it with. */ |
| 1175 | target_terminal_init (); |
| 1176 | |
| 1177 | /* Install inferior's terminal modes. */ |
| 1178 | target_terminal_inferior (); |
| 1179 | |
| 1180 | /* We will get a task spawn event immediately. */ |
| 1181 | init_wait_for_inferior (); |
| 1182 | clear_proceed_status (); |
| 1183 | stop_soon_quietly = 1; |
| 1184 | wait_for_inferior (); |
| 1185 | stop_soon_quietly = 0; |
| 1186 | normal_stop (); |
| 1187 | } |
| 1188 | |
| 1189 | |
| 1190 | /* detach_command -- |
| 1191 | takes a program previously attached to and detaches it. |
| 1192 | The program resumes execution and will no longer stop |
| 1193 | on signals, etc. We better not have left any breakpoints |
| 1194 | in the program or it'll die when it hits one. For this |
| 1195 | to work, it may be necessary for the process to have been |
| 1196 | previously attached. It *might* work if the program was |
| 1197 | started via the normal ptrace (PTRACE_TRACEME). */ |
| 1198 | |
| 1199 | static void |
| 1200 | vx_detach (args, from_tty) |
| 1201 | char *args; |
| 1202 | int from_tty; |
| 1203 | { |
| 1204 | Rptrace ptrace_in; |
| 1205 | Ptrace_return ptrace_out; |
| 1206 | int signal = 0; |
| 1207 | int status; |
| 1208 | |
| 1209 | if (args) |
| 1210 | error ("Argument given to VxWorks \"detach\"."); |
| 1211 | |
| 1212 | if (from_tty) |
| 1213 | printf ("Detaching pid %s.\n", local_hex_string(inferior_pid)); |
| 1214 | |
| 1215 | if (args) /* FIXME, should be possible to leave suspended */ |
| 1216 | signal = atoi (args); |
| 1217 | |
| 1218 | bzero ((char *)&ptrace_in, sizeof (ptrace_in)); |
| 1219 | bzero ((char *)&ptrace_out, sizeof (ptrace_out)); |
| 1220 | ptrace_in.pid = inferior_pid; |
| 1221 | |
| 1222 | status = net_ptrace_clnt_call (PTRACE_DETACH, &ptrace_in, &ptrace_out); |
| 1223 | if (status == -1) |
| 1224 | error (rpcerr); |
| 1225 | if (ptrace_out.status == -1) |
| 1226 | { |
| 1227 | errno = ptrace_out.errno; |
| 1228 | perror_with_name ("Detaching VxWorks process"); |
| 1229 | } |
| 1230 | |
| 1231 | inferior_pid = 0; |
| 1232 | pop_target (); /* go back to non-executing VxWorks connection */ |
| 1233 | } |
| 1234 | |
| 1235 | /* vx_kill -- takes a running task and wipes it out. */ |
| 1236 | |
| 1237 | static void |
| 1238 | vx_kill () |
| 1239 | { |
| 1240 | Rptrace ptrace_in; |
| 1241 | Ptrace_return ptrace_out; |
| 1242 | int status; |
| 1243 | |
| 1244 | printf ("Killing pid %s.\n", local_hex_string(inferior_pid)); |
| 1245 | |
| 1246 | bzero ((char *)&ptrace_in, sizeof (ptrace_in)); |
| 1247 | bzero ((char *)&ptrace_out, sizeof (ptrace_out)); |
| 1248 | ptrace_in.pid = inferior_pid; |
| 1249 | |
| 1250 | status = net_ptrace_clnt_call (PTRACE_KILL, &ptrace_in, &ptrace_out); |
| 1251 | if (status == -1) |
| 1252 | error (rpcerr); |
| 1253 | if (ptrace_out.status == -1) |
| 1254 | { |
| 1255 | errno = ptrace_out.errno; |
| 1256 | perror_with_name ("Killing VxWorks process"); |
| 1257 | } |
| 1258 | |
| 1259 | /* If it gives good status, the process is *gone*, no events remain. */ |
| 1260 | inferior_pid = 0; |
| 1261 | pop_target (); /* go back to non-executing VxWorks connection */ |
| 1262 | } |
| 1263 | |
| 1264 | /* Clean up from the VxWorks process target as it goes away. */ |
| 1265 | |
| 1266 | static void |
| 1267 | vx_proc_close (quitting) |
| 1268 | int quitting; |
| 1269 | { |
| 1270 | inferior_pid = 0; /* No longer have a process. */ |
| 1271 | if (vx_running) |
| 1272 | free (vx_running); |
| 1273 | vx_running = 0; |
| 1274 | } |
| 1275 | \f |
| 1276 | /* Make an RPC call to the VxWorks target. |
| 1277 | Returns RPC status. */ |
| 1278 | |
| 1279 | static enum clnt_stat |
| 1280 | net_clnt_call (procNum, inProc, in, outProc, out) |
| 1281 | enum ptracereq procNum; |
| 1282 | xdrproc_t inProc; |
| 1283 | char *in; |
| 1284 | xdrproc_t outProc; |
| 1285 | char *out; |
| 1286 | { |
| 1287 | enum clnt_stat status; |
| 1288 | |
| 1289 | status = clnt_call (pClient, procNum, inProc, in, outProc, out, rpcTimeout); |
| 1290 | |
| 1291 | if (status != RPC_SUCCESS) |
| 1292 | clnt_perrno (status); |
| 1293 | |
| 1294 | return status; |
| 1295 | } |
| 1296 | |
| 1297 | /* Clean up before losing control. */ |
| 1298 | |
| 1299 | static void |
| 1300 | vx_close (quitting) |
| 1301 | int quitting; |
| 1302 | { |
| 1303 | if (pClient) |
| 1304 | clnt_destroy (pClient); /* The net connection */ |
| 1305 | pClient = 0; |
| 1306 | |
| 1307 | if (vx_host) |
| 1308 | free (vx_host); /* The hostname */ |
| 1309 | vx_host = 0; |
| 1310 | } |
| 1311 | |
| 1312 | /* A vxprocess target should be started via "run" not "target". */ |
| 1313 | /*ARGSUSED*/ |
| 1314 | static void |
| 1315 | vx_proc_open (name, from_tty) |
| 1316 | char *name; |
| 1317 | int from_tty; |
| 1318 | { |
| 1319 | error ("Use the \"run\" command to start a VxWorks process."); |
| 1320 | } |
| 1321 | |
| 1322 | /* Target ops structure for accessing memory and such over the net */ |
| 1323 | |
| 1324 | struct target_ops vx_ops = { |
| 1325 | "vxworks", "VxWorks target memory via RPC over TCP/IP", |
| 1326 | "Use VxWorks target memory. \n\ |
| 1327 | Specify the name of the machine to connect to.", |
| 1328 | vx_open, vx_close, vx_attach, 0, /* vx_detach, */ |
| 1329 | 0, 0, /* resume, wait */ |
| 1330 | 0, 0, /* read_reg, write_reg */ |
| 1331 | 0, host_convert_to_virtual, host_convert_from_virtual, /* prep_to_store, */ |
| 1332 | vx_xfer_memory, vx_files_info, |
| 1333 | 0, 0, /* insert_breakpoint, remove_breakpoint */ |
| 1334 | 0, 0, 0, 0, 0, /* terminal stuff */ |
| 1335 | 0, /* vx_kill, */ |
| 1336 | vx_load_command, |
| 1337 | vx_lookup_symbol, |
| 1338 | vx_create_inferior, 0, /* mourn_inferior */ |
| 1339 | core_stratum, 0, /* next */ |
| 1340 | 1, 1, 0, 0, 0, /* all mem, mem, stack, regs, exec */ |
| 1341 | 0, 0, /* Section pointers */ |
| 1342 | OPS_MAGIC, /* Always the last thing */ |
| 1343 | }; |
| 1344 | |
| 1345 | /* Target ops structure for accessing VxWorks child processes over the net */ |
| 1346 | |
| 1347 | struct target_ops vx_run_ops = { |
| 1348 | "vxprocess", "VxWorks process", |
| 1349 | "VxWorks process, started by the \"run\" command.", |
| 1350 | vx_proc_open, vx_proc_close, 0, vx_detach, /* vx_attach */ |
| 1351 | vx_resume, vx_wait, |
| 1352 | vx_read_register, vx_write_register, |
| 1353 | vx_prepare_to_store, host_convert_to_virtual, host_convert_from_virtual, |
| 1354 | vx_xfer_memory, vx_run_files_info, |
| 1355 | vx_insert_breakpoint, vx_remove_breakpoint, |
| 1356 | 0, 0, 0, 0, 0, /* terminal stuff */ |
| 1357 | vx_kill, |
| 1358 | vx_load_command, |
| 1359 | vx_lookup_symbol, |
| 1360 | 0, vx_mourn_inferior, |
| 1361 | process_stratum, 0, /* next */ |
| 1362 | 0, 1, 1, 1, 1, /* all mem, mem, stack, regs, exec */ |
| 1363 | /* all_mem is off to avoid spurious msg in "i files" */ |
| 1364 | 0, 0, /* Section pointers */ |
| 1365 | OPS_MAGIC, /* Always the last thing */ |
| 1366 | }; |
| 1367 | /* ==> Remember when reading at end of file, there are two "ops" structs here. */ |
| 1368 | \f |
| 1369 | void |
| 1370 | _initialize_vx () |
| 1371 | { |
| 1372 | add_target (&vx_ops); |
| 1373 | add_target (&vx_run_ops); |
| 1374 | } |