| 1 | /* Target-dependent code for GDB, the GNU debugger. |
| 2 | |
| 3 | Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, |
| 4 | 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software |
| 5 | Foundation, Inc. |
| 6 | |
| 7 | This file is part of GDB. |
| 8 | |
| 9 | This program is free software; you can redistribute it and/or modify |
| 10 | it under the terms of the GNU General Public License as published by |
| 11 | the Free Software Foundation; either version 2 of the License, or |
| 12 | (at your option) any later version. |
| 13 | |
| 14 | This program is distributed in the hope that it will be useful, |
| 15 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | GNU General Public License for more details. |
| 18 | |
| 19 | You should have received a copy of the GNU General Public License |
| 20 | along with this program; if not, write to the Free Software |
| 21 | Foundation, Inc., 59 Temple Place - Suite 330, |
| 22 | Boston, MA 02111-1307, USA. */ |
| 23 | |
| 24 | #include "defs.h" |
| 25 | #include "frame.h" |
| 26 | #include "inferior.h" |
| 27 | #include "symtab.h" |
| 28 | #include "target.h" |
| 29 | #include "gdbcore.h" |
| 30 | #include "gdbcmd.h" |
| 31 | #include "objfiles.h" |
| 32 | #include "arch-utils.h" |
| 33 | #include "regcache.h" |
| 34 | #include "regset.h" |
| 35 | #include "doublest.h" |
| 36 | #include "value.h" |
| 37 | #include "parser-defs.h" |
| 38 | #include "osabi.h" |
| 39 | #include "infcall.h" |
| 40 | |
| 41 | #include "libbfd.h" /* for bfd_default_set_arch_mach */ |
| 42 | #include "coff/internal.h" /* for libcoff.h */ |
| 43 | #include "libcoff.h" /* for xcoff_data */ |
| 44 | #include "coff/xcoff.h" |
| 45 | #include "libxcoff.h" |
| 46 | |
| 47 | #include "elf-bfd.h" |
| 48 | |
| 49 | #include "solib-svr4.h" |
| 50 | #include "ppc-tdep.h" |
| 51 | |
| 52 | #include "gdb_assert.h" |
| 53 | #include "dis-asm.h" |
| 54 | |
| 55 | #include "trad-frame.h" |
| 56 | #include "frame-unwind.h" |
| 57 | #include "frame-base.h" |
| 58 | |
| 59 | /* If the kernel has to deliver a signal, it pushes a sigcontext |
| 60 | structure on the stack and then calls the signal handler, passing |
| 61 | the address of the sigcontext in an argument register. Usually |
| 62 | the signal handler doesn't save this register, so we have to |
| 63 | access the sigcontext structure via an offset from the signal handler |
| 64 | frame. |
| 65 | The following constants were determined by experimentation on AIX 3.2. */ |
| 66 | #define SIG_FRAME_PC_OFFSET 96 |
| 67 | #define SIG_FRAME_LR_OFFSET 108 |
| 68 | #define SIG_FRAME_FP_OFFSET 284 |
| 69 | |
| 70 | /* To be used by skip_prologue. */ |
| 71 | |
| 72 | struct rs6000_framedata |
| 73 | { |
| 74 | int offset; /* total size of frame --- the distance |
| 75 | by which we decrement sp to allocate |
| 76 | the frame */ |
| 77 | int saved_gpr; /* smallest # of saved gpr */ |
| 78 | int saved_fpr; /* smallest # of saved fpr */ |
| 79 | int saved_vr; /* smallest # of saved vr */ |
| 80 | int saved_ev; /* smallest # of saved ev */ |
| 81 | int alloca_reg; /* alloca register number (frame ptr) */ |
| 82 | char frameless; /* true if frameless functions. */ |
| 83 | char nosavedpc; /* true if pc not saved. */ |
| 84 | int gpr_offset; /* offset of saved gprs from prev sp */ |
| 85 | int fpr_offset; /* offset of saved fprs from prev sp */ |
| 86 | int vr_offset; /* offset of saved vrs from prev sp */ |
| 87 | int ev_offset; /* offset of saved evs from prev sp */ |
| 88 | int lr_offset; /* offset of saved lr */ |
| 89 | int cr_offset; /* offset of saved cr */ |
| 90 | int vrsave_offset; /* offset of saved vrsave register */ |
| 91 | }; |
| 92 | |
| 93 | /* Description of a single register. */ |
| 94 | |
| 95 | struct reg |
| 96 | { |
| 97 | char *name; /* name of register */ |
| 98 | unsigned char sz32; /* size on 32-bit arch, 0 if nonextant */ |
| 99 | unsigned char sz64; /* size on 64-bit arch, 0 if nonextant */ |
| 100 | unsigned char fpr; /* whether register is floating-point */ |
| 101 | unsigned char pseudo; /* whether register is pseudo */ |
| 102 | }; |
| 103 | |
| 104 | /* Breakpoint shadows for the single step instructions will be kept here. */ |
| 105 | |
| 106 | static struct sstep_breaks |
| 107 | { |
| 108 | /* Address, or 0 if this is not in use. */ |
| 109 | CORE_ADDR address; |
| 110 | /* Shadow contents. */ |
| 111 | char data[4]; |
| 112 | } |
| 113 | stepBreaks[2]; |
| 114 | |
| 115 | /* Hook for determining the TOC address when calling functions in the |
| 116 | inferior under AIX. The initialization code in rs6000-nat.c sets |
| 117 | this hook to point to find_toc_address. */ |
| 118 | |
| 119 | CORE_ADDR (*rs6000_find_toc_address_hook) (CORE_ADDR) = NULL; |
| 120 | |
| 121 | /* Hook to set the current architecture when starting a child process. |
| 122 | rs6000-nat.c sets this. */ |
| 123 | |
| 124 | void (*rs6000_set_host_arch_hook) (int) = NULL; |
| 125 | |
| 126 | /* Static function prototypes */ |
| 127 | |
| 128 | static CORE_ADDR branch_dest (int opcode, int instr, CORE_ADDR pc, |
| 129 | CORE_ADDR safety); |
| 130 | static CORE_ADDR skip_prologue (CORE_ADDR, CORE_ADDR, |
| 131 | struct rs6000_framedata *); |
| 132 | |
| 133 | /* Is REGNO an AltiVec register? Return 1 if so, 0 otherwise. */ |
| 134 | int |
| 135 | altivec_register_p (int regno) |
| 136 | { |
| 137 | struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); |
| 138 | if (tdep->ppc_vr0_regnum < 0 || tdep->ppc_vrsave_regnum < 0) |
| 139 | return 0; |
| 140 | else |
| 141 | return (regno >= tdep->ppc_vr0_regnum && regno <= tdep->ppc_vrsave_regnum); |
| 142 | } |
| 143 | |
| 144 | |
| 145 | /* Return true if REGNO is an SPE register, false otherwise. */ |
| 146 | int |
| 147 | spe_register_p (int regno) |
| 148 | { |
| 149 | struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); |
| 150 | |
| 151 | /* Is it a reference to EV0 -- EV31, and do we have those? */ |
| 152 | if (tdep->ppc_ev0_regnum >= 0 |
| 153 | && tdep->ppc_ev31_regnum >= 0 |
| 154 | && tdep->ppc_ev0_regnum <= regno && regno <= tdep->ppc_ev31_regnum) |
| 155 | return 1; |
| 156 | |
| 157 | /* Is it a reference to the 64-bit accumulator, and do we have that? */ |
| 158 | if (tdep->ppc_acc_regnum >= 0 |
| 159 | && tdep->ppc_acc_regnum == regno) |
| 160 | return 1; |
| 161 | |
| 162 | /* Is it a reference to the SPE floating-point status and control register, |
| 163 | and do we have that? */ |
| 164 | if (tdep->ppc_spefscr_regnum >= 0 |
| 165 | && tdep->ppc_spefscr_regnum == regno) |
| 166 | return 1; |
| 167 | |
| 168 | return 0; |
| 169 | } |
| 170 | |
| 171 | |
| 172 | /* Return non-zero if the architecture described by GDBARCH has |
| 173 | floating-point registers (f0 --- f31 and fpscr). */ |
| 174 | int |
| 175 | ppc_floating_point_unit_p (struct gdbarch *gdbarch) |
| 176 | { |
| 177 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 178 | |
| 179 | return (tdep->ppc_fp0_regnum >= 0 |
| 180 | && tdep->ppc_fpscr_regnum >= 0); |
| 181 | } |
| 182 | \f |
| 183 | |
| 184 | /* Register set support functions. */ |
| 185 | |
| 186 | static void |
| 187 | ppc_supply_reg (struct regcache *regcache, int regnum, |
| 188 | const char *regs, size_t offset) |
| 189 | { |
| 190 | if (regnum != -1 && offset != -1) |
| 191 | regcache_raw_supply (regcache, regnum, regs + offset); |
| 192 | } |
| 193 | |
| 194 | static void |
| 195 | ppc_collect_reg (const struct regcache *regcache, int regnum, |
| 196 | char *regs, size_t offset) |
| 197 | { |
| 198 | if (regnum != -1 && offset != -1) |
| 199 | regcache_raw_collect (regcache, regnum, regs + offset); |
| 200 | } |
| 201 | |
| 202 | /* Supply register REGNUM in the general-purpose register set REGSET |
| 203 | from the buffer specified by GREGS and LEN to register cache |
| 204 | REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */ |
| 205 | |
| 206 | void |
| 207 | ppc_supply_gregset (const struct regset *regset, struct regcache *regcache, |
| 208 | int regnum, const void *gregs, size_t len) |
| 209 | { |
| 210 | struct gdbarch *gdbarch = get_regcache_arch (regcache); |
| 211 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 212 | const struct ppc_reg_offsets *offsets = regset->descr; |
| 213 | size_t offset; |
| 214 | int i; |
| 215 | |
| 216 | for (i = tdep->ppc_gp0_regnum, offset = offsets->r0_offset; |
| 217 | i < tdep->ppc_gp0_regnum + ppc_num_gprs; |
| 218 | i++, offset += 4) |
| 219 | { |
| 220 | if (regnum == -1 || regnum == i) |
| 221 | ppc_supply_reg (regcache, i, gregs, offset); |
| 222 | } |
| 223 | |
| 224 | if (regnum == -1 || regnum == PC_REGNUM) |
| 225 | ppc_supply_reg (regcache, PC_REGNUM, gregs, offsets->pc_offset); |
| 226 | if (regnum == -1 || regnum == tdep->ppc_ps_regnum) |
| 227 | ppc_supply_reg (regcache, tdep->ppc_ps_regnum, |
| 228 | gregs, offsets->ps_offset); |
| 229 | if (regnum == -1 || regnum == tdep->ppc_cr_regnum) |
| 230 | ppc_supply_reg (regcache, tdep->ppc_cr_regnum, |
| 231 | gregs, offsets->cr_offset); |
| 232 | if (regnum == -1 || regnum == tdep->ppc_lr_regnum) |
| 233 | ppc_supply_reg (regcache, tdep->ppc_lr_regnum, |
| 234 | gregs, offsets->lr_offset); |
| 235 | if (regnum == -1 || regnum == tdep->ppc_ctr_regnum) |
| 236 | ppc_supply_reg (regcache, tdep->ppc_ctr_regnum, |
| 237 | gregs, offsets->ctr_offset); |
| 238 | if (regnum == -1 || regnum == tdep->ppc_xer_regnum) |
| 239 | ppc_supply_reg (regcache, tdep->ppc_xer_regnum, |
| 240 | gregs, offsets->cr_offset); |
| 241 | if (regnum == -1 || regnum == tdep->ppc_mq_regnum) |
| 242 | ppc_supply_reg (regcache, tdep->ppc_mq_regnum, gregs, offsets->mq_offset); |
| 243 | } |
| 244 | |
| 245 | /* Supply register REGNUM in the floating-point register set REGSET |
| 246 | from the buffer specified by FPREGS and LEN to register cache |
| 247 | REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */ |
| 248 | |
| 249 | void |
| 250 | ppc_supply_fpregset (const struct regset *regset, struct regcache *regcache, |
| 251 | int regnum, const void *fpregs, size_t len) |
| 252 | { |
| 253 | struct gdbarch *gdbarch = get_regcache_arch (regcache); |
| 254 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 255 | const struct ppc_reg_offsets *offsets = regset->descr; |
| 256 | size_t offset; |
| 257 | int i; |
| 258 | |
| 259 | gdb_assert (ppc_floating_point_unit_p (gdbarch)); |
| 260 | |
| 261 | offset = offsets->f0_offset; |
| 262 | for (i = tdep->ppc_fp0_regnum; |
| 263 | i < tdep->ppc_fp0_regnum + ppc_num_fprs; |
| 264 | i++, offset += 4) |
| 265 | { |
| 266 | if (regnum == -1 || regnum == i) |
| 267 | ppc_supply_reg (regcache, i, fpregs, offset); |
| 268 | } |
| 269 | |
| 270 | if (regnum == -1 || regnum == tdep->ppc_fpscr_regnum) |
| 271 | ppc_supply_reg (regcache, tdep->ppc_fpscr_regnum, |
| 272 | fpregs, offsets->fpscr_offset); |
| 273 | } |
| 274 | |
| 275 | /* Collect register REGNUM in the general-purpose register set |
| 276 | REGSET. from register cache REGCACHE into the buffer specified by |
| 277 | GREGS and LEN. If REGNUM is -1, do this for all registers in |
| 278 | REGSET. */ |
| 279 | |
| 280 | void |
| 281 | ppc_collect_gregset (const struct regset *regset, |
| 282 | const struct regcache *regcache, |
| 283 | int regnum, void *gregs, size_t len) |
| 284 | { |
| 285 | struct gdbarch *gdbarch = get_regcache_arch (regcache); |
| 286 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 287 | const struct ppc_reg_offsets *offsets = regset->descr; |
| 288 | size_t offset; |
| 289 | int i; |
| 290 | |
| 291 | offset = offsets->r0_offset; |
| 292 | for (i = tdep->ppc_gp0_regnum; |
| 293 | i < tdep->ppc_gp0_regnum + ppc_num_gprs; |
| 294 | i++, offset += 4) |
| 295 | { |
| 296 | if (regnum == -1 || regnum == i) |
| 297 | ppc_collect_reg (regcache, i, gregs, offset); |
| 298 | } |
| 299 | |
| 300 | if (regnum == -1 || regnum == PC_REGNUM) |
| 301 | ppc_collect_reg (regcache, PC_REGNUM, gregs, offsets->pc_offset); |
| 302 | if (regnum == -1 || regnum == tdep->ppc_ps_regnum) |
| 303 | ppc_collect_reg (regcache, tdep->ppc_ps_regnum, |
| 304 | gregs, offsets->ps_offset); |
| 305 | if (regnum == -1 || regnum == tdep->ppc_cr_regnum) |
| 306 | ppc_collect_reg (regcache, tdep->ppc_cr_regnum, |
| 307 | gregs, offsets->cr_offset); |
| 308 | if (regnum == -1 || regnum == tdep->ppc_lr_regnum) |
| 309 | ppc_collect_reg (regcache, tdep->ppc_lr_regnum, |
| 310 | gregs, offsets->lr_offset); |
| 311 | if (regnum == -1 || regnum == tdep->ppc_ctr_regnum) |
| 312 | ppc_collect_reg (regcache, tdep->ppc_ctr_regnum, |
| 313 | gregs, offsets->ctr_offset); |
| 314 | if (regnum == -1 || regnum == tdep->ppc_xer_regnum) |
| 315 | ppc_collect_reg (regcache, tdep->ppc_xer_regnum, |
| 316 | gregs, offsets->xer_offset); |
| 317 | if (regnum == -1 || regnum == tdep->ppc_mq_regnum) |
| 318 | ppc_collect_reg (regcache, tdep->ppc_mq_regnum, |
| 319 | gregs, offsets->mq_offset); |
| 320 | } |
| 321 | |
| 322 | /* Collect register REGNUM in the floating-point register set |
| 323 | REGSET. from register cache REGCACHE into the buffer specified by |
| 324 | FPREGS and LEN. If REGNUM is -1, do this for all registers in |
| 325 | REGSET. */ |
| 326 | |
| 327 | void |
| 328 | ppc_collect_fpregset (const struct regset *regset, |
| 329 | const struct regcache *regcache, |
| 330 | int regnum, void *fpregs, size_t len) |
| 331 | { |
| 332 | struct gdbarch *gdbarch = get_regcache_arch (regcache); |
| 333 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 334 | const struct ppc_reg_offsets *offsets = regset->descr; |
| 335 | size_t offset; |
| 336 | int i; |
| 337 | |
| 338 | gdb_assert (ppc_floating_point_unit_p (gdbarch)); |
| 339 | |
| 340 | offset = offsets->f0_offset; |
| 341 | for (i = tdep->ppc_fp0_regnum; |
| 342 | i <= tdep->ppc_fp0_regnum + ppc_num_fprs; |
| 343 | i++, offset += 4) |
| 344 | { |
| 345 | if (regnum == -1 || regnum == i) |
| 346 | ppc_collect_reg (regcache, regnum, fpregs, offset); |
| 347 | } |
| 348 | |
| 349 | if (regnum == -1 || regnum == tdep->ppc_fpscr_regnum) |
| 350 | ppc_collect_reg (regcache, tdep->ppc_fpscr_regnum, |
| 351 | fpregs, offsets->fpscr_offset); |
| 352 | } |
| 353 | \f |
| 354 | |
| 355 | /* Read a LEN-byte address from debugged memory address MEMADDR. */ |
| 356 | |
| 357 | static CORE_ADDR |
| 358 | read_memory_addr (CORE_ADDR memaddr, int len) |
| 359 | { |
| 360 | return read_memory_unsigned_integer (memaddr, len); |
| 361 | } |
| 362 | |
| 363 | static CORE_ADDR |
| 364 | rs6000_skip_prologue (CORE_ADDR pc) |
| 365 | { |
| 366 | struct rs6000_framedata frame; |
| 367 | pc = skip_prologue (pc, 0, &frame); |
| 368 | return pc; |
| 369 | } |
| 370 | |
| 371 | |
| 372 | /* Fill in fi->saved_regs */ |
| 373 | |
| 374 | struct frame_extra_info |
| 375 | { |
| 376 | /* Functions calling alloca() change the value of the stack |
| 377 | pointer. We need to use initial stack pointer (which is saved in |
| 378 | r31 by gcc) in such cases. If a compiler emits traceback table, |
| 379 | then we should use the alloca register specified in traceback |
| 380 | table. FIXME. */ |
| 381 | CORE_ADDR initial_sp; /* initial stack pointer. */ |
| 382 | }; |
| 383 | |
| 384 | /* Get the ith function argument for the current function. */ |
| 385 | static CORE_ADDR |
| 386 | rs6000_fetch_pointer_argument (struct frame_info *frame, int argi, |
| 387 | struct type *type) |
| 388 | { |
| 389 | CORE_ADDR addr; |
| 390 | get_frame_register (frame, 3 + argi, &addr); |
| 391 | return addr; |
| 392 | } |
| 393 | |
| 394 | /* Calculate the destination of a branch/jump. Return -1 if not a branch. */ |
| 395 | |
| 396 | static CORE_ADDR |
| 397 | branch_dest (int opcode, int instr, CORE_ADDR pc, CORE_ADDR safety) |
| 398 | { |
| 399 | CORE_ADDR dest; |
| 400 | int immediate; |
| 401 | int absolute; |
| 402 | int ext_op; |
| 403 | |
| 404 | absolute = (int) ((instr >> 1) & 1); |
| 405 | |
| 406 | switch (opcode) |
| 407 | { |
| 408 | case 18: |
| 409 | immediate = ((instr & ~3) << 6) >> 6; /* br unconditional */ |
| 410 | if (absolute) |
| 411 | dest = immediate; |
| 412 | else |
| 413 | dest = pc + immediate; |
| 414 | break; |
| 415 | |
| 416 | case 16: |
| 417 | immediate = ((instr & ~3) << 16) >> 16; /* br conditional */ |
| 418 | if (absolute) |
| 419 | dest = immediate; |
| 420 | else |
| 421 | dest = pc + immediate; |
| 422 | break; |
| 423 | |
| 424 | case 19: |
| 425 | ext_op = (instr >> 1) & 0x3ff; |
| 426 | |
| 427 | if (ext_op == 16) /* br conditional register */ |
| 428 | { |
| 429 | dest = read_register (gdbarch_tdep (current_gdbarch)->ppc_lr_regnum) & ~3; |
| 430 | |
| 431 | /* If we are about to return from a signal handler, dest is |
| 432 | something like 0x3c90. The current frame is a signal handler |
| 433 | caller frame, upon completion of the sigreturn system call |
| 434 | execution will return to the saved PC in the frame. */ |
| 435 | if (dest < TEXT_SEGMENT_BASE) |
| 436 | { |
| 437 | struct frame_info *fi; |
| 438 | |
| 439 | fi = get_current_frame (); |
| 440 | if (fi != NULL) |
| 441 | dest = read_memory_addr (get_frame_base (fi) + SIG_FRAME_PC_OFFSET, |
| 442 | gdbarch_tdep (current_gdbarch)->wordsize); |
| 443 | } |
| 444 | } |
| 445 | |
| 446 | else if (ext_op == 528) /* br cond to count reg */ |
| 447 | { |
| 448 | dest = read_register (gdbarch_tdep (current_gdbarch)->ppc_ctr_regnum) & ~3; |
| 449 | |
| 450 | /* If we are about to execute a system call, dest is something |
| 451 | like 0x22fc or 0x3b00. Upon completion the system call |
| 452 | will return to the address in the link register. */ |
| 453 | if (dest < TEXT_SEGMENT_BASE) |
| 454 | dest = read_register (gdbarch_tdep (current_gdbarch)->ppc_lr_regnum) & ~3; |
| 455 | } |
| 456 | else |
| 457 | return -1; |
| 458 | break; |
| 459 | |
| 460 | default: |
| 461 | return -1; |
| 462 | } |
| 463 | return (dest < TEXT_SEGMENT_BASE) ? safety : dest; |
| 464 | } |
| 465 | |
| 466 | |
| 467 | /* Sequence of bytes for breakpoint instruction. */ |
| 468 | |
| 469 | const static unsigned char * |
| 470 | rs6000_breakpoint_from_pc (CORE_ADDR *bp_addr, int *bp_size) |
| 471 | { |
| 472 | static unsigned char big_breakpoint[] = { 0x7d, 0x82, 0x10, 0x08 }; |
| 473 | static unsigned char little_breakpoint[] = { 0x08, 0x10, 0x82, 0x7d }; |
| 474 | *bp_size = 4; |
| 475 | if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| 476 | return big_breakpoint; |
| 477 | else |
| 478 | return little_breakpoint; |
| 479 | } |
| 480 | |
| 481 | |
| 482 | /* AIX does not support PT_STEP. Simulate it. */ |
| 483 | |
| 484 | void |
| 485 | rs6000_software_single_step (enum target_signal signal, |
| 486 | int insert_breakpoints_p) |
| 487 | { |
| 488 | CORE_ADDR dummy; |
| 489 | int breakp_sz; |
| 490 | const char *breakp = rs6000_breakpoint_from_pc (&dummy, &breakp_sz); |
| 491 | int ii, insn; |
| 492 | CORE_ADDR loc; |
| 493 | CORE_ADDR breaks[2]; |
| 494 | int opcode; |
| 495 | |
| 496 | if (insert_breakpoints_p) |
| 497 | { |
| 498 | |
| 499 | loc = read_pc (); |
| 500 | |
| 501 | insn = read_memory_integer (loc, 4); |
| 502 | |
| 503 | breaks[0] = loc + breakp_sz; |
| 504 | opcode = insn >> 26; |
| 505 | breaks[1] = branch_dest (opcode, insn, loc, breaks[0]); |
| 506 | |
| 507 | /* Don't put two breakpoints on the same address. */ |
| 508 | if (breaks[1] == breaks[0]) |
| 509 | breaks[1] = -1; |
| 510 | |
| 511 | stepBreaks[1].address = 0; |
| 512 | |
| 513 | for (ii = 0; ii < 2; ++ii) |
| 514 | { |
| 515 | |
| 516 | /* ignore invalid breakpoint. */ |
| 517 | if (breaks[ii] == -1) |
| 518 | continue; |
| 519 | target_insert_breakpoint (breaks[ii], stepBreaks[ii].data); |
| 520 | stepBreaks[ii].address = breaks[ii]; |
| 521 | } |
| 522 | |
| 523 | } |
| 524 | else |
| 525 | { |
| 526 | |
| 527 | /* remove step breakpoints. */ |
| 528 | for (ii = 0; ii < 2; ++ii) |
| 529 | if (stepBreaks[ii].address != 0) |
| 530 | target_remove_breakpoint (stepBreaks[ii].address, |
| 531 | stepBreaks[ii].data); |
| 532 | } |
| 533 | errno = 0; /* FIXME, don't ignore errors! */ |
| 534 | /* What errors? {read,write}_memory call error(). */ |
| 535 | } |
| 536 | |
| 537 | |
| 538 | /* return pc value after skipping a function prologue and also return |
| 539 | information about a function frame. |
| 540 | |
| 541 | in struct rs6000_framedata fdata: |
| 542 | - frameless is TRUE, if function does not have a frame. |
| 543 | - nosavedpc is TRUE, if function does not save %pc value in its frame. |
| 544 | - offset is the initial size of this stack frame --- the amount by |
| 545 | which we decrement the sp to allocate the frame. |
| 546 | - saved_gpr is the number of the first saved gpr. |
| 547 | - saved_fpr is the number of the first saved fpr. |
| 548 | - saved_vr is the number of the first saved vr. |
| 549 | - saved_ev is the number of the first saved ev. |
| 550 | - alloca_reg is the number of the register used for alloca() handling. |
| 551 | Otherwise -1. |
| 552 | - gpr_offset is the offset of the first saved gpr from the previous frame. |
| 553 | - fpr_offset is the offset of the first saved fpr from the previous frame. |
| 554 | - vr_offset is the offset of the first saved vr from the previous frame. |
| 555 | - ev_offset is the offset of the first saved ev from the previous frame. |
| 556 | - lr_offset is the offset of the saved lr |
| 557 | - cr_offset is the offset of the saved cr |
| 558 | - vrsave_offset is the offset of the saved vrsave register |
| 559 | */ |
| 560 | |
| 561 | #define SIGNED_SHORT(x) \ |
| 562 | ((sizeof (short) == 2) \ |
| 563 | ? ((int)(short)(x)) \ |
| 564 | : ((int)((((x) & 0xffff) ^ 0x8000) - 0x8000))) |
| 565 | |
| 566 | #define GET_SRC_REG(x) (((x) >> 21) & 0x1f) |
| 567 | |
| 568 | /* Limit the number of skipped non-prologue instructions, as the examining |
| 569 | of the prologue is expensive. */ |
| 570 | static int max_skip_non_prologue_insns = 10; |
| 571 | |
| 572 | /* Given PC representing the starting address of a function, and |
| 573 | LIM_PC which is the (sloppy) limit to which to scan when looking |
| 574 | for a prologue, attempt to further refine this limit by using |
| 575 | the line data in the symbol table. If successful, a better guess |
| 576 | on where the prologue ends is returned, otherwise the previous |
| 577 | value of lim_pc is returned. */ |
| 578 | |
| 579 | /* FIXME: cagney/2004-02-14: This function and logic have largely been |
| 580 | superseded by skip_prologue_using_sal. */ |
| 581 | |
| 582 | static CORE_ADDR |
| 583 | refine_prologue_limit (CORE_ADDR pc, CORE_ADDR lim_pc) |
| 584 | { |
| 585 | struct symtab_and_line prologue_sal; |
| 586 | |
| 587 | prologue_sal = find_pc_line (pc, 0); |
| 588 | if (prologue_sal.line != 0) |
| 589 | { |
| 590 | int i; |
| 591 | CORE_ADDR addr = prologue_sal.end; |
| 592 | |
| 593 | /* Handle the case in which compiler's optimizer/scheduler |
| 594 | has moved instructions into the prologue. We scan ahead |
| 595 | in the function looking for address ranges whose corresponding |
| 596 | line number is less than or equal to the first one that we |
| 597 | found for the function. (It can be less than when the |
| 598 | scheduler puts a body instruction before the first prologue |
| 599 | instruction.) */ |
| 600 | for (i = 2 * max_skip_non_prologue_insns; |
| 601 | i > 0 && (lim_pc == 0 || addr < lim_pc); |
| 602 | i--) |
| 603 | { |
| 604 | struct symtab_and_line sal; |
| 605 | |
| 606 | sal = find_pc_line (addr, 0); |
| 607 | if (sal.line == 0) |
| 608 | break; |
| 609 | if (sal.line <= prologue_sal.line |
| 610 | && sal.symtab == prologue_sal.symtab) |
| 611 | { |
| 612 | prologue_sal = sal; |
| 613 | } |
| 614 | addr = sal.end; |
| 615 | } |
| 616 | |
| 617 | if (lim_pc == 0 || prologue_sal.end < lim_pc) |
| 618 | lim_pc = prologue_sal.end; |
| 619 | } |
| 620 | return lim_pc; |
| 621 | } |
| 622 | |
| 623 | /* Return nonzero if the given instruction OP can be part of the prologue |
| 624 | of a function and saves a parameter on the stack. FRAMEP should be |
| 625 | set if one of the previous instructions in the function has set the |
| 626 | Frame Pointer. */ |
| 627 | |
| 628 | static int |
| 629 | store_param_on_stack_p (unsigned long op, int framep, int *r0_contains_arg) |
| 630 | { |
| 631 | /* Move parameters from argument registers to temporary register. */ |
| 632 | if ((op & 0xfc0007fe) == 0x7c000378) /* mr(.) Rx,Ry */ |
| 633 | { |
| 634 | /* Rx must be scratch register r0. */ |
| 635 | const int rx_regno = (op >> 16) & 31; |
| 636 | /* Ry: Only r3 - r10 are used for parameter passing. */ |
| 637 | const int ry_regno = GET_SRC_REG (op); |
| 638 | |
| 639 | if (rx_regno == 0 && ry_regno >= 3 && ry_regno <= 10) |
| 640 | { |
| 641 | *r0_contains_arg = 1; |
| 642 | return 1; |
| 643 | } |
| 644 | else |
| 645 | return 0; |
| 646 | } |
| 647 | |
| 648 | /* Save a General Purpose Register on stack. */ |
| 649 | |
| 650 | if ((op & 0xfc1f0003) == 0xf8010000 || /* std Rx,NUM(r1) */ |
| 651 | (op & 0xfc1f0000) == 0xd8010000) /* stfd Rx,NUM(r1) */ |
| 652 | { |
| 653 | /* Rx: Only r3 - r10 are used for parameter passing. */ |
| 654 | const int rx_regno = GET_SRC_REG (op); |
| 655 | |
| 656 | return (rx_regno >= 3 && rx_regno <= 10); |
| 657 | } |
| 658 | |
| 659 | /* Save a General Purpose Register on stack via the Frame Pointer. */ |
| 660 | |
| 661 | if (framep && |
| 662 | ((op & 0xfc1f0000) == 0x901f0000 || /* st rx,NUM(r31) */ |
| 663 | (op & 0xfc1f0000) == 0x981f0000 || /* stb Rx,NUM(r31) */ |
| 664 | (op & 0xfc1f0000) == 0xd81f0000)) /* stfd Rx,NUM(r31) */ |
| 665 | { |
| 666 | /* Rx: Usually, only r3 - r10 are used for parameter passing. |
| 667 | However, the compiler sometimes uses r0 to hold an argument. */ |
| 668 | const int rx_regno = GET_SRC_REG (op); |
| 669 | |
| 670 | return ((rx_regno >= 3 && rx_regno <= 10) |
| 671 | || (rx_regno == 0 && *r0_contains_arg)); |
| 672 | } |
| 673 | |
| 674 | if ((op & 0xfc1f0000) == 0xfc010000) /* frsp, fp?,NUM(r1) */ |
| 675 | { |
| 676 | /* Only f2 - f8 are used for parameter passing. */ |
| 677 | const int src_regno = GET_SRC_REG (op); |
| 678 | |
| 679 | return (src_regno >= 2 && src_regno <= 8); |
| 680 | } |
| 681 | |
| 682 | if (framep && ((op & 0xfc1f0000) == 0xfc1f0000)) /* frsp, fp?,NUM(r31) */ |
| 683 | { |
| 684 | /* Only f2 - f8 are used for parameter passing. */ |
| 685 | const int src_regno = GET_SRC_REG (op); |
| 686 | |
| 687 | return (src_regno >= 2 && src_regno <= 8); |
| 688 | } |
| 689 | |
| 690 | /* Not an insn that saves a parameter on stack. */ |
| 691 | return 0; |
| 692 | } |
| 693 | |
| 694 | static CORE_ADDR |
| 695 | skip_prologue (CORE_ADDR pc, CORE_ADDR lim_pc, struct rs6000_framedata *fdata) |
| 696 | { |
| 697 | CORE_ADDR orig_pc = pc; |
| 698 | CORE_ADDR last_prologue_pc = pc; |
| 699 | CORE_ADDR li_found_pc = 0; |
| 700 | char buf[4]; |
| 701 | unsigned long op; |
| 702 | long offset = 0; |
| 703 | long vr_saved_offset = 0; |
| 704 | int lr_reg = -1; |
| 705 | int cr_reg = -1; |
| 706 | int vr_reg = -1; |
| 707 | int ev_reg = -1; |
| 708 | long ev_offset = 0; |
| 709 | int vrsave_reg = -1; |
| 710 | int reg; |
| 711 | int framep = 0; |
| 712 | int minimal_toc_loaded = 0; |
| 713 | int prev_insn_was_prologue_insn = 1; |
| 714 | int num_skip_non_prologue_insns = 0; |
| 715 | int r0_contains_arg = 0; |
| 716 | const struct bfd_arch_info *arch_info = gdbarch_bfd_arch_info (current_gdbarch); |
| 717 | struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); |
| 718 | |
| 719 | /* Attempt to find the end of the prologue when no limit is specified. |
| 720 | Note that refine_prologue_limit() has been written so that it may |
| 721 | be used to "refine" the limits of non-zero PC values too, but this |
| 722 | is only safe if we 1) trust the line information provided by the |
| 723 | compiler and 2) iterate enough to actually find the end of the |
| 724 | prologue. |
| 725 | |
| 726 | It may become a good idea at some point (for both performance and |
| 727 | accuracy) to unconditionally call refine_prologue_limit(). But, |
| 728 | until we can make a clear determination that this is beneficial, |
| 729 | we'll play it safe and only use it to obtain a limit when none |
| 730 | has been specified. */ |
| 731 | if (lim_pc == 0) |
| 732 | lim_pc = refine_prologue_limit (pc, lim_pc); |
| 733 | |
| 734 | memset (fdata, 0, sizeof (struct rs6000_framedata)); |
| 735 | fdata->saved_gpr = -1; |
| 736 | fdata->saved_fpr = -1; |
| 737 | fdata->saved_vr = -1; |
| 738 | fdata->saved_ev = -1; |
| 739 | fdata->alloca_reg = -1; |
| 740 | fdata->frameless = 1; |
| 741 | fdata->nosavedpc = 1; |
| 742 | |
| 743 | for (;; pc += 4) |
| 744 | { |
| 745 | /* Sometimes it isn't clear if an instruction is a prologue |
| 746 | instruction or not. When we encounter one of these ambiguous |
| 747 | cases, we'll set prev_insn_was_prologue_insn to 0 (false). |
| 748 | Otherwise, we'll assume that it really is a prologue instruction. */ |
| 749 | if (prev_insn_was_prologue_insn) |
| 750 | last_prologue_pc = pc; |
| 751 | |
| 752 | /* Stop scanning if we've hit the limit. */ |
| 753 | if (lim_pc != 0 && pc >= lim_pc) |
| 754 | break; |
| 755 | |
| 756 | prev_insn_was_prologue_insn = 1; |
| 757 | |
| 758 | /* Fetch the instruction and convert it to an integer. */ |
| 759 | if (target_read_memory (pc, buf, 4)) |
| 760 | break; |
| 761 | op = extract_signed_integer (buf, 4); |
| 762 | |
| 763 | if ((op & 0xfc1fffff) == 0x7c0802a6) |
| 764 | { /* mflr Rx */ |
| 765 | /* Since shared library / PIC code, which needs to get its |
| 766 | address at runtime, can appear to save more than one link |
| 767 | register vis: |
| 768 | |
| 769 | *INDENT-OFF* |
| 770 | stwu r1,-304(r1) |
| 771 | mflr r3 |
| 772 | bl 0xff570d0 (blrl) |
| 773 | stw r30,296(r1) |
| 774 | mflr r30 |
| 775 | stw r31,300(r1) |
| 776 | stw r3,308(r1); |
| 777 | ... |
| 778 | *INDENT-ON* |
| 779 | |
| 780 | remember just the first one, but skip over additional |
| 781 | ones. */ |
| 782 | if (lr_reg < 0) |
| 783 | lr_reg = (op & 0x03e00000); |
| 784 | if (lr_reg == 0) |
| 785 | r0_contains_arg = 0; |
| 786 | continue; |
| 787 | } |
| 788 | else if ((op & 0xfc1fffff) == 0x7c000026) |
| 789 | { /* mfcr Rx */ |
| 790 | cr_reg = (op & 0x03e00000); |
| 791 | if (cr_reg == 0) |
| 792 | r0_contains_arg = 0; |
| 793 | continue; |
| 794 | |
| 795 | } |
| 796 | else if ((op & 0xfc1f0000) == 0xd8010000) |
| 797 | { /* stfd Rx,NUM(r1) */ |
| 798 | reg = GET_SRC_REG (op); |
| 799 | if (fdata->saved_fpr == -1 || fdata->saved_fpr > reg) |
| 800 | { |
| 801 | fdata->saved_fpr = reg; |
| 802 | fdata->fpr_offset = SIGNED_SHORT (op) + offset; |
| 803 | } |
| 804 | continue; |
| 805 | |
| 806 | } |
| 807 | else if (((op & 0xfc1f0000) == 0xbc010000) || /* stm Rx, NUM(r1) */ |
| 808 | (((op & 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */ |
| 809 | (op & 0xfc1f0003) == 0xf8010000) && /* std rx,NUM(r1) */ |
| 810 | (op & 0x03e00000) >= 0x01a00000)) /* rx >= r13 */ |
| 811 | { |
| 812 | |
| 813 | reg = GET_SRC_REG (op); |
| 814 | if (fdata->saved_gpr == -1 || fdata->saved_gpr > reg) |
| 815 | { |
| 816 | fdata->saved_gpr = reg; |
| 817 | if ((op & 0xfc1f0003) == 0xf8010000) |
| 818 | op &= ~3UL; |
| 819 | fdata->gpr_offset = SIGNED_SHORT (op) + offset; |
| 820 | } |
| 821 | continue; |
| 822 | |
| 823 | } |
| 824 | else if ((op & 0xffff0000) == 0x60000000) |
| 825 | { |
| 826 | /* nop */ |
| 827 | /* Allow nops in the prologue, but do not consider them to |
| 828 | be part of the prologue unless followed by other prologue |
| 829 | instructions. */ |
| 830 | prev_insn_was_prologue_insn = 0; |
| 831 | continue; |
| 832 | |
| 833 | } |
| 834 | else if ((op & 0xffff0000) == 0x3c000000) |
| 835 | { /* addis 0,0,NUM, used |
| 836 | for >= 32k frames */ |
| 837 | fdata->offset = (op & 0x0000ffff) << 16; |
| 838 | fdata->frameless = 0; |
| 839 | r0_contains_arg = 0; |
| 840 | continue; |
| 841 | |
| 842 | } |
| 843 | else if ((op & 0xffff0000) == 0x60000000) |
| 844 | { /* ori 0,0,NUM, 2nd ha |
| 845 | lf of >= 32k frames */ |
| 846 | fdata->offset |= (op & 0x0000ffff); |
| 847 | fdata->frameless = 0; |
| 848 | r0_contains_arg = 0; |
| 849 | continue; |
| 850 | |
| 851 | } |
| 852 | else if (lr_reg != -1 && |
| 853 | /* std Rx, NUM(r1) || stdu Rx, NUM(r1) */ |
| 854 | (((op & 0xffff0000) == (lr_reg | 0xf8010000)) || |
| 855 | /* stw Rx, NUM(r1) */ |
| 856 | ((op & 0xffff0000) == (lr_reg | 0x90010000)) || |
| 857 | /* stwu Rx, NUM(r1) */ |
| 858 | ((op & 0xffff0000) == (lr_reg | 0x94010000)))) |
| 859 | { /* where Rx == lr */ |
| 860 | fdata->lr_offset = offset; |
| 861 | fdata->nosavedpc = 0; |
| 862 | lr_reg = 0; |
| 863 | if ((op & 0xfc000003) == 0xf8000000 || /* std */ |
| 864 | (op & 0xfc000000) == 0x90000000) /* stw */ |
| 865 | { |
| 866 | /* Does not update r1, so add displacement to lr_offset. */ |
| 867 | fdata->lr_offset += SIGNED_SHORT (op); |
| 868 | } |
| 869 | continue; |
| 870 | |
| 871 | } |
| 872 | else if (cr_reg != -1 && |
| 873 | /* std Rx, NUM(r1) || stdu Rx, NUM(r1) */ |
| 874 | (((op & 0xffff0000) == (cr_reg | 0xf8010000)) || |
| 875 | /* stw Rx, NUM(r1) */ |
| 876 | ((op & 0xffff0000) == (cr_reg | 0x90010000)) || |
| 877 | /* stwu Rx, NUM(r1) */ |
| 878 | ((op & 0xffff0000) == (cr_reg | 0x94010000)))) |
| 879 | { /* where Rx == cr */ |
| 880 | fdata->cr_offset = offset; |
| 881 | cr_reg = 0; |
| 882 | if ((op & 0xfc000003) == 0xf8000000 || |
| 883 | (op & 0xfc000000) == 0x90000000) |
| 884 | { |
| 885 | /* Does not update r1, so add displacement to cr_offset. */ |
| 886 | fdata->cr_offset += SIGNED_SHORT (op); |
| 887 | } |
| 888 | continue; |
| 889 | |
| 890 | } |
| 891 | else if (op == 0x48000005) |
| 892 | { /* bl .+4 used in |
| 893 | -mrelocatable */ |
| 894 | continue; |
| 895 | |
| 896 | } |
| 897 | else if (op == 0x48000004) |
| 898 | { /* b .+4 (xlc) */ |
| 899 | break; |
| 900 | |
| 901 | } |
| 902 | else if ((op & 0xffff0000) == 0x3fc00000 || /* addis 30,0,foo@ha, used |
| 903 | in V.4 -mminimal-toc */ |
| 904 | (op & 0xffff0000) == 0x3bde0000) |
| 905 | { /* addi 30,30,foo@l */ |
| 906 | continue; |
| 907 | |
| 908 | } |
| 909 | else if ((op & 0xfc000001) == 0x48000001) |
| 910 | { /* bl foo, |
| 911 | to save fprs??? */ |
| 912 | |
| 913 | fdata->frameless = 0; |
| 914 | /* Don't skip over the subroutine call if it is not within |
| 915 | the first three instructions of the prologue. */ |
| 916 | if ((pc - orig_pc) > 8) |
| 917 | break; |
| 918 | |
| 919 | op = read_memory_integer (pc + 4, 4); |
| 920 | |
| 921 | /* At this point, make sure this is not a trampoline |
| 922 | function (a function that simply calls another functions, |
| 923 | and nothing else). If the next is not a nop, this branch |
| 924 | was part of the function prologue. */ |
| 925 | |
| 926 | if (op == 0x4def7b82 || op == 0) /* crorc 15, 15, 15 */ |
| 927 | break; /* don't skip over |
| 928 | this branch */ |
| 929 | continue; |
| 930 | |
| 931 | } |
| 932 | /* update stack pointer */ |
| 933 | else if ((op & 0xfc1f0000) == 0x94010000) |
| 934 | { /* stu rX,NUM(r1) || stwu rX,NUM(r1) */ |
| 935 | fdata->frameless = 0; |
| 936 | fdata->offset = SIGNED_SHORT (op); |
| 937 | offset = fdata->offset; |
| 938 | continue; |
| 939 | } |
| 940 | else if ((op & 0xfc1f016a) == 0x7c01016e) |
| 941 | { /* stwux rX,r1,rY */ |
| 942 | /* no way to figure out what r1 is going to be */ |
| 943 | fdata->frameless = 0; |
| 944 | offset = fdata->offset; |
| 945 | continue; |
| 946 | } |
| 947 | else if ((op & 0xfc1f0003) == 0xf8010001) |
| 948 | { /* stdu rX,NUM(r1) */ |
| 949 | fdata->frameless = 0; |
| 950 | fdata->offset = SIGNED_SHORT (op & ~3UL); |
| 951 | offset = fdata->offset; |
| 952 | continue; |
| 953 | } |
| 954 | else if ((op & 0xfc1f016a) == 0x7c01016a) |
| 955 | { /* stdux rX,r1,rY */ |
| 956 | /* no way to figure out what r1 is going to be */ |
| 957 | fdata->frameless = 0; |
| 958 | offset = fdata->offset; |
| 959 | continue; |
| 960 | } |
| 961 | /* Load up minimal toc pointer */ |
| 962 | else if (((op >> 22) == 0x20f || /* l r31,... or l r30,... */ |
| 963 | (op >> 22) == 0x3af) /* ld r31,... or ld r30,... */ |
| 964 | && !minimal_toc_loaded) |
| 965 | { |
| 966 | minimal_toc_loaded = 1; |
| 967 | continue; |
| 968 | |
| 969 | /* move parameters from argument registers to local variable |
| 970 | registers */ |
| 971 | } |
| 972 | else if ((op & 0xfc0007fe) == 0x7c000378 && /* mr(.) Rx,Ry */ |
| 973 | (((op >> 21) & 31) >= 3) && /* R3 >= Ry >= R10 */ |
| 974 | (((op >> 21) & 31) <= 10) && |
| 975 | ((long) ((op >> 16) & 31) >= fdata->saved_gpr)) /* Rx: local var reg */ |
| 976 | { |
| 977 | continue; |
| 978 | |
| 979 | /* store parameters in stack */ |
| 980 | } |
| 981 | /* Move parameters from argument registers to temporary register. */ |
| 982 | else if (store_param_on_stack_p (op, framep, &r0_contains_arg)) |
| 983 | { |
| 984 | continue; |
| 985 | |
| 986 | /* Set up frame pointer */ |
| 987 | } |
| 988 | else if (op == 0x603f0000 /* oril r31, r1, 0x0 */ |
| 989 | || op == 0x7c3f0b78) |
| 990 | { /* mr r31, r1 */ |
| 991 | fdata->frameless = 0; |
| 992 | framep = 1; |
| 993 | fdata->alloca_reg = (tdep->ppc_gp0_regnum + 31); |
| 994 | continue; |
| 995 | |
| 996 | /* Another way to set up the frame pointer. */ |
| 997 | } |
| 998 | else if ((op & 0xfc1fffff) == 0x38010000) |
| 999 | { /* addi rX, r1, 0x0 */ |
| 1000 | fdata->frameless = 0; |
| 1001 | framep = 1; |
| 1002 | fdata->alloca_reg = (tdep->ppc_gp0_regnum |
| 1003 | + ((op & ~0x38010000) >> 21)); |
| 1004 | continue; |
| 1005 | } |
| 1006 | /* AltiVec related instructions. */ |
| 1007 | /* Store the vrsave register (spr 256) in another register for |
| 1008 | later manipulation, or load a register into the vrsave |
| 1009 | register. 2 instructions are used: mfvrsave and |
| 1010 | mtvrsave. They are shorthand notation for mfspr Rn, SPR256 |
| 1011 | and mtspr SPR256, Rn. */ |
| 1012 | /* mfspr Rn SPR256 == 011111 nnnnn 0000001000 01010100110 |
| 1013 | mtspr SPR256 Rn == 011111 nnnnn 0000001000 01110100110 */ |
| 1014 | else if ((op & 0xfc1fffff) == 0x7c0042a6) /* mfvrsave Rn */ |
| 1015 | { |
| 1016 | vrsave_reg = GET_SRC_REG (op); |
| 1017 | continue; |
| 1018 | } |
| 1019 | else if ((op & 0xfc1fffff) == 0x7c0043a6) /* mtvrsave Rn */ |
| 1020 | { |
| 1021 | continue; |
| 1022 | } |
| 1023 | /* Store the register where vrsave was saved to onto the stack: |
| 1024 | rS is the register where vrsave was stored in a previous |
| 1025 | instruction. */ |
| 1026 | /* 100100 sssss 00001 dddddddd dddddddd */ |
| 1027 | else if ((op & 0xfc1f0000) == 0x90010000) /* stw rS, d(r1) */ |
| 1028 | { |
| 1029 | if (vrsave_reg == GET_SRC_REG (op)) |
| 1030 | { |
| 1031 | fdata->vrsave_offset = SIGNED_SHORT (op) + offset; |
| 1032 | vrsave_reg = -1; |
| 1033 | } |
| 1034 | continue; |
| 1035 | } |
| 1036 | /* Compute the new value of vrsave, by modifying the register |
| 1037 | where vrsave was saved to. */ |
| 1038 | else if (((op & 0xfc000000) == 0x64000000) /* oris Ra, Rs, UIMM */ |
| 1039 | || ((op & 0xfc000000) == 0x60000000))/* ori Ra, Rs, UIMM */ |
| 1040 | { |
| 1041 | continue; |
| 1042 | } |
| 1043 | /* li r0, SIMM (short for addi r0, 0, SIMM). This is the first |
| 1044 | in a pair of insns to save the vector registers on the |
| 1045 | stack. */ |
| 1046 | /* 001110 00000 00000 iiii iiii iiii iiii */ |
| 1047 | /* 001110 01110 00000 iiii iiii iiii iiii */ |
| 1048 | else if ((op & 0xffff0000) == 0x38000000 /* li r0, SIMM */ |
| 1049 | || (op & 0xffff0000) == 0x39c00000) /* li r14, SIMM */ |
| 1050 | { |
| 1051 | if ((op & 0xffff0000) == 0x38000000) |
| 1052 | r0_contains_arg = 0; |
| 1053 | li_found_pc = pc; |
| 1054 | vr_saved_offset = SIGNED_SHORT (op); |
| 1055 | |
| 1056 | /* This insn by itself is not part of the prologue, unless |
| 1057 | if part of the pair of insns mentioned above. So do not |
| 1058 | record this insn as part of the prologue yet. */ |
| 1059 | prev_insn_was_prologue_insn = 0; |
| 1060 | } |
| 1061 | /* Store vector register S at (r31+r0) aligned to 16 bytes. */ |
| 1062 | /* 011111 sssss 11111 00000 00111001110 */ |
| 1063 | else if ((op & 0xfc1fffff) == 0x7c1f01ce) /* stvx Vs, R31, R0 */ |
| 1064 | { |
| 1065 | if (pc == (li_found_pc + 4)) |
| 1066 | { |
| 1067 | vr_reg = GET_SRC_REG (op); |
| 1068 | /* If this is the first vector reg to be saved, or if |
| 1069 | it has a lower number than others previously seen, |
| 1070 | reupdate the frame info. */ |
| 1071 | if (fdata->saved_vr == -1 || fdata->saved_vr > vr_reg) |
| 1072 | { |
| 1073 | fdata->saved_vr = vr_reg; |
| 1074 | fdata->vr_offset = vr_saved_offset + offset; |
| 1075 | } |
| 1076 | vr_saved_offset = -1; |
| 1077 | vr_reg = -1; |
| 1078 | li_found_pc = 0; |
| 1079 | } |
| 1080 | } |
| 1081 | /* End AltiVec related instructions. */ |
| 1082 | |
| 1083 | /* Start BookE related instructions. */ |
| 1084 | /* Store gen register S at (r31+uimm). |
| 1085 | Any register less than r13 is volatile, so we don't care. */ |
| 1086 | /* 000100 sssss 11111 iiiii 01100100001 */ |
| 1087 | else if (arch_info->mach == bfd_mach_ppc_e500 |
| 1088 | && (op & 0xfc1f07ff) == 0x101f0321) /* evstdd Rs,uimm(R31) */ |
| 1089 | { |
| 1090 | if ((op & 0x03e00000) >= 0x01a00000) /* Rs >= r13 */ |
| 1091 | { |
| 1092 | unsigned int imm; |
| 1093 | ev_reg = GET_SRC_REG (op); |
| 1094 | imm = (op >> 11) & 0x1f; |
| 1095 | ev_offset = imm * 8; |
| 1096 | /* If this is the first vector reg to be saved, or if |
| 1097 | it has a lower number than others previously seen, |
| 1098 | reupdate the frame info. */ |
| 1099 | if (fdata->saved_ev == -1 || fdata->saved_ev > ev_reg) |
| 1100 | { |
| 1101 | fdata->saved_ev = ev_reg; |
| 1102 | fdata->ev_offset = ev_offset + offset; |
| 1103 | } |
| 1104 | } |
| 1105 | continue; |
| 1106 | } |
| 1107 | /* Store gen register rS at (r1+rB). */ |
| 1108 | /* 000100 sssss 00001 bbbbb 01100100000 */ |
| 1109 | else if (arch_info->mach == bfd_mach_ppc_e500 |
| 1110 | && (op & 0xffe007ff) == 0x13e00320) /* evstddx RS,R1,Rb */ |
| 1111 | { |
| 1112 | if (pc == (li_found_pc + 4)) |
| 1113 | { |
| 1114 | ev_reg = GET_SRC_REG (op); |
| 1115 | /* If this is the first vector reg to be saved, or if |
| 1116 | it has a lower number than others previously seen, |
| 1117 | reupdate the frame info. */ |
| 1118 | /* We know the contents of rB from the previous instruction. */ |
| 1119 | if (fdata->saved_ev == -1 || fdata->saved_ev > ev_reg) |
| 1120 | { |
| 1121 | fdata->saved_ev = ev_reg; |
| 1122 | fdata->ev_offset = vr_saved_offset + offset; |
| 1123 | } |
| 1124 | vr_saved_offset = -1; |
| 1125 | ev_reg = -1; |
| 1126 | li_found_pc = 0; |
| 1127 | } |
| 1128 | continue; |
| 1129 | } |
| 1130 | /* Store gen register r31 at (rA+uimm). */ |
| 1131 | /* 000100 11111 aaaaa iiiii 01100100001 */ |
| 1132 | else if (arch_info->mach == bfd_mach_ppc_e500 |
| 1133 | && (op & 0xffe007ff) == 0x13e00321) /* evstdd R31,Ra,UIMM */ |
| 1134 | { |
| 1135 | /* Wwe know that the source register is 31 already, but |
| 1136 | it can't hurt to compute it. */ |
| 1137 | ev_reg = GET_SRC_REG (op); |
| 1138 | ev_offset = ((op >> 11) & 0x1f) * 8; |
| 1139 | /* If this is the first vector reg to be saved, or if |
| 1140 | it has a lower number than others previously seen, |
| 1141 | reupdate the frame info. */ |
| 1142 | if (fdata->saved_ev == -1 || fdata->saved_ev > ev_reg) |
| 1143 | { |
| 1144 | fdata->saved_ev = ev_reg; |
| 1145 | fdata->ev_offset = ev_offset + offset; |
| 1146 | } |
| 1147 | |
| 1148 | continue; |
| 1149 | } |
| 1150 | /* Store gen register S at (r31+r0). |
| 1151 | Store param on stack when offset from SP bigger than 4 bytes. */ |
| 1152 | /* 000100 sssss 11111 00000 01100100000 */ |
| 1153 | else if (arch_info->mach == bfd_mach_ppc_e500 |
| 1154 | && (op & 0xfc1fffff) == 0x101f0320) /* evstddx Rs,R31,R0 */ |
| 1155 | { |
| 1156 | if (pc == (li_found_pc + 4)) |
| 1157 | { |
| 1158 | if ((op & 0x03e00000) >= 0x01a00000) |
| 1159 | { |
| 1160 | ev_reg = GET_SRC_REG (op); |
| 1161 | /* If this is the first vector reg to be saved, or if |
| 1162 | it has a lower number than others previously seen, |
| 1163 | reupdate the frame info. */ |
| 1164 | /* We know the contents of r0 from the previous |
| 1165 | instruction. */ |
| 1166 | if (fdata->saved_ev == -1 || fdata->saved_ev > ev_reg) |
| 1167 | { |
| 1168 | fdata->saved_ev = ev_reg; |
| 1169 | fdata->ev_offset = vr_saved_offset + offset; |
| 1170 | } |
| 1171 | ev_reg = -1; |
| 1172 | } |
| 1173 | vr_saved_offset = -1; |
| 1174 | li_found_pc = 0; |
| 1175 | continue; |
| 1176 | } |
| 1177 | } |
| 1178 | /* End BookE related instructions. */ |
| 1179 | |
| 1180 | else |
| 1181 | { |
| 1182 | /* Not a recognized prologue instruction. |
| 1183 | Handle optimizer code motions into the prologue by continuing |
| 1184 | the search if we have no valid frame yet or if the return |
| 1185 | address is not yet saved in the frame. */ |
| 1186 | if (fdata->frameless == 0 |
| 1187 | && (lr_reg == -1 || fdata->nosavedpc == 0)) |
| 1188 | break; |
| 1189 | |
| 1190 | if (op == 0x4e800020 /* blr */ |
| 1191 | || op == 0x4e800420) /* bctr */ |
| 1192 | /* Do not scan past epilogue in frameless functions or |
| 1193 | trampolines. */ |
| 1194 | break; |
| 1195 | if ((op & 0xf4000000) == 0x40000000) /* bxx */ |
| 1196 | /* Never skip branches. */ |
| 1197 | break; |
| 1198 | |
| 1199 | if (num_skip_non_prologue_insns++ > max_skip_non_prologue_insns) |
| 1200 | /* Do not scan too many insns, scanning insns is expensive with |
| 1201 | remote targets. */ |
| 1202 | break; |
| 1203 | |
| 1204 | /* Continue scanning. */ |
| 1205 | prev_insn_was_prologue_insn = 0; |
| 1206 | continue; |
| 1207 | } |
| 1208 | } |
| 1209 | |
| 1210 | #if 0 |
| 1211 | /* I have problems with skipping over __main() that I need to address |
| 1212 | * sometime. Previously, I used to use misc_function_vector which |
| 1213 | * didn't work as well as I wanted to be. -MGO */ |
| 1214 | |
| 1215 | /* If the first thing after skipping a prolog is a branch to a function, |
| 1216 | this might be a call to an initializer in main(), introduced by gcc2. |
| 1217 | We'd like to skip over it as well. Fortunately, xlc does some extra |
| 1218 | work before calling a function right after a prologue, thus we can |
| 1219 | single out such gcc2 behaviour. */ |
| 1220 | |
| 1221 | |
| 1222 | if ((op & 0xfc000001) == 0x48000001) |
| 1223 | { /* bl foo, an initializer function? */ |
| 1224 | op = read_memory_integer (pc + 4, 4); |
| 1225 | |
| 1226 | if (op == 0x4def7b82) |
| 1227 | { /* cror 0xf, 0xf, 0xf (nop) */ |
| 1228 | |
| 1229 | /* Check and see if we are in main. If so, skip over this |
| 1230 | initializer function as well. */ |
| 1231 | |
| 1232 | tmp = find_pc_misc_function (pc); |
| 1233 | if (tmp >= 0 |
| 1234 | && strcmp (misc_function_vector[tmp].name, main_name ()) == 0) |
| 1235 | return pc + 8; |
| 1236 | } |
| 1237 | } |
| 1238 | #endif /* 0 */ |
| 1239 | |
| 1240 | fdata->offset = -fdata->offset; |
| 1241 | return last_prologue_pc; |
| 1242 | } |
| 1243 | |
| 1244 | |
| 1245 | /************************************************************************* |
| 1246 | Support for creating pushing a dummy frame into the stack, and popping |
| 1247 | frames, etc. |
| 1248 | *************************************************************************/ |
| 1249 | |
| 1250 | |
| 1251 | /* All the ABI's require 16 byte alignment. */ |
| 1252 | static CORE_ADDR |
| 1253 | rs6000_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr) |
| 1254 | { |
| 1255 | return (addr & -16); |
| 1256 | } |
| 1257 | |
| 1258 | /* Pass the arguments in either registers, or in the stack. In RS/6000, |
| 1259 | the first eight words of the argument list (that might be less than |
| 1260 | eight parameters if some parameters occupy more than one word) are |
| 1261 | passed in r3..r10 registers. float and double parameters are |
| 1262 | passed in fpr's, in addition to that. Rest of the parameters if any |
| 1263 | are passed in user stack. There might be cases in which half of the |
| 1264 | parameter is copied into registers, the other half is pushed into |
| 1265 | stack. |
| 1266 | |
| 1267 | Stack must be aligned on 64-bit boundaries when synthesizing |
| 1268 | function calls. |
| 1269 | |
| 1270 | If the function is returning a structure, then the return address is passed |
| 1271 | in r3, then the first 7 words of the parameters can be passed in registers, |
| 1272 | starting from r4. */ |
| 1273 | |
| 1274 | static CORE_ADDR |
| 1275 | rs6000_push_dummy_call (struct gdbarch *gdbarch, struct value *function, |
| 1276 | struct regcache *regcache, CORE_ADDR bp_addr, |
| 1277 | int nargs, struct value **args, CORE_ADDR sp, |
| 1278 | int struct_return, CORE_ADDR struct_addr) |
| 1279 | { |
| 1280 | struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); |
| 1281 | int ii; |
| 1282 | int len = 0; |
| 1283 | int argno; /* current argument number */ |
| 1284 | int argbytes; /* current argument byte */ |
| 1285 | char tmp_buffer[50]; |
| 1286 | int f_argno = 0; /* current floating point argno */ |
| 1287 | int wordsize = gdbarch_tdep (current_gdbarch)->wordsize; |
| 1288 | CORE_ADDR func_addr = find_function_addr (function, NULL); |
| 1289 | |
| 1290 | struct value *arg = 0; |
| 1291 | struct type *type; |
| 1292 | |
| 1293 | CORE_ADDR saved_sp; |
| 1294 | |
| 1295 | /* The calling convention this function implements assumes the |
| 1296 | processor has floating-point registers. We shouldn't be using it |
| 1297 | on PPC variants that lack them. */ |
| 1298 | gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); |
| 1299 | |
| 1300 | /* The first eight words of ther arguments are passed in registers. |
| 1301 | Copy them appropriately. */ |
| 1302 | ii = 0; |
| 1303 | |
| 1304 | /* If the function is returning a `struct', then the first word |
| 1305 | (which will be passed in r3) is used for struct return address. |
| 1306 | In that case we should advance one word and start from r4 |
| 1307 | register to copy parameters. */ |
| 1308 | if (struct_return) |
| 1309 | { |
| 1310 | regcache_raw_write_unsigned (regcache, tdep->ppc_gp0_regnum + 3, |
| 1311 | struct_addr); |
| 1312 | ii++; |
| 1313 | } |
| 1314 | |
| 1315 | /* |
| 1316 | effectively indirect call... gcc does... |
| 1317 | |
| 1318 | return_val example( float, int); |
| 1319 | |
| 1320 | eabi: |
| 1321 | float in fp0, int in r3 |
| 1322 | offset of stack on overflow 8/16 |
| 1323 | for varargs, must go by type. |
| 1324 | power open: |
| 1325 | float in r3&r4, int in r5 |
| 1326 | offset of stack on overflow different |
| 1327 | both: |
| 1328 | return in r3 or f0. If no float, must study how gcc emulates floats; |
| 1329 | pay attention to arg promotion. |
| 1330 | User may have to cast\args to handle promotion correctly |
| 1331 | since gdb won't know if prototype supplied or not. |
| 1332 | */ |
| 1333 | |
| 1334 | for (argno = 0, argbytes = 0; argno < nargs && ii < 8; ++ii) |
| 1335 | { |
| 1336 | int reg_size = DEPRECATED_REGISTER_RAW_SIZE (ii + 3); |
| 1337 | |
| 1338 | arg = args[argno]; |
| 1339 | type = check_typedef (VALUE_TYPE (arg)); |
| 1340 | len = TYPE_LENGTH (type); |
| 1341 | |
| 1342 | if (TYPE_CODE (type) == TYPE_CODE_FLT) |
| 1343 | { |
| 1344 | |
| 1345 | /* Floating point arguments are passed in fpr's, as well as gpr's. |
| 1346 | There are 13 fpr's reserved for passing parameters. At this point |
| 1347 | there is no way we would run out of them. */ |
| 1348 | |
| 1349 | if (len > 8) |
| 1350 | printf_unfiltered ("Fatal Error: a floating point parameter " |
| 1351 | "#%d with a size > 8 is found!\n", argno); |
| 1352 | |
| 1353 | memcpy (&deprecated_registers[DEPRECATED_REGISTER_BYTE |
| 1354 | (tdep->ppc_fp0_regnum + 1 + f_argno)], |
| 1355 | VALUE_CONTENTS (arg), |
| 1356 | len); |
| 1357 | ++f_argno; |
| 1358 | } |
| 1359 | |
| 1360 | if (len > reg_size) |
| 1361 | { |
| 1362 | |
| 1363 | /* Argument takes more than one register. */ |
| 1364 | while (argbytes < len) |
| 1365 | { |
| 1366 | memset (&deprecated_registers[DEPRECATED_REGISTER_BYTE (ii + 3)], 0, |
| 1367 | reg_size); |
| 1368 | memcpy (&deprecated_registers[DEPRECATED_REGISTER_BYTE (ii + 3)], |
| 1369 | ((char *) VALUE_CONTENTS (arg)) + argbytes, |
| 1370 | (len - argbytes) > reg_size |
| 1371 | ? reg_size : len - argbytes); |
| 1372 | ++ii, argbytes += reg_size; |
| 1373 | |
| 1374 | if (ii >= 8) |
| 1375 | goto ran_out_of_registers_for_arguments; |
| 1376 | } |
| 1377 | argbytes = 0; |
| 1378 | --ii; |
| 1379 | } |
| 1380 | else |
| 1381 | { |
| 1382 | /* Argument can fit in one register. No problem. */ |
| 1383 | int adj = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? reg_size - len : 0; |
| 1384 | memset (&deprecated_registers[DEPRECATED_REGISTER_BYTE (ii + 3)], 0, reg_size); |
| 1385 | memcpy ((char *)&deprecated_registers[DEPRECATED_REGISTER_BYTE (ii + 3)] + adj, |
| 1386 | VALUE_CONTENTS (arg), len); |
| 1387 | } |
| 1388 | ++argno; |
| 1389 | } |
| 1390 | |
| 1391 | ran_out_of_registers_for_arguments: |
| 1392 | |
| 1393 | saved_sp = read_sp (); |
| 1394 | |
| 1395 | /* Location for 8 parameters are always reserved. */ |
| 1396 | sp -= wordsize * 8; |
| 1397 | |
| 1398 | /* Another six words for back chain, TOC register, link register, etc. */ |
| 1399 | sp -= wordsize * 6; |
| 1400 | |
| 1401 | /* Stack pointer must be quadword aligned. */ |
| 1402 | sp &= -16; |
| 1403 | |
| 1404 | /* If there are more arguments, allocate space for them in |
| 1405 | the stack, then push them starting from the ninth one. */ |
| 1406 | |
| 1407 | if ((argno < nargs) || argbytes) |
| 1408 | { |
| 1409 | int space = 0, jj; |
| 1410 | |
| 1411 | if (argbytes) |
| 1412 | { |
| 1413 | space += ((len - argbytes + 3) & -4); |
| 1414 | jj = argno + 1; |
| 1415 | } |
| 1416 | else |
| 1417 | jj = argno; |
| 1418 | |
| 1419 | for (; jj < nargs; ++jj) |
| 1420 | { |
| 1421 | struct value *val = args[jj]; |
| 1422 | space += ((TYPE_LENGTH (VALUE_TYPE (val))) + 3) & -4; |
| 1423 | } |
| 1424 | |
| 1425 | /* Add location required for the rest of the parameters. */ |
| 1426 | space = (space + 15) & -16; |
| 1427 | sp -= space; |
| 1428 | |
| 1429 | /* This is another instance we need to be concerned about |
| 1430 | securing our stack space. If we write anything underneath %sp |
| 1431 | (r1), we might conflict with the kernel who thinks he is free |
| 1432 | to use this area. So, update %sp first before doing anything |
| 1433 | else. */ |
| 1434 | |
| 1435 | regcache_raw_write_signed (regcache, SP_REGNUM, sp); |
| 1436 | |
| 1437 | /* If the last argument copied into the registers didn't fit there |
| 1438 | completely, push the rest of it into stack. */ |
| 1439 | |
| 1440 | if (argbytes) |
| 1441 | { |
| 1442 | write_memory (sp + 24 + (ii * 4), |
| 1443 | ((char *) VALUE_CONTENTS (arg)) + argbytes, |
| 1444 | len - argbytes); |
| 1445 | ++argno; |
| 1446 | ii += ((len - argbytes + 3) & -4) / 4; |
| 1447 | } |
| 1448 | |
| 1449 | /* Push the rest of the arguments into stack. */ |
| 1450 | for (; argno < nargs; ++argno) |
| 1451 | { |
| 1452 | |
| 1453 | arg = args[argno]; |
| 1454 | type = check_typedef (VALUE_TYPE (arg)); |
| 1455 | len = TYPE_LENGTH (type); |
| 1456 | |
| 1457 | |
| 1458 | /* Float types should be passed in fpr's, as well as in the |
| 1459 | stack. */ |
| 1460 | if (TYPE_CODE (type) == TYPE_CODE_FLT && f_argno < 13) |
| 1461 | { |
| 1462 | |
| 1463 | if (len > 8) |
| 1464 | printf_unfiltered ("Fatal Error: a floating point parameter" |
| 1465 | " #%d with a size > 8 is found!\n", argno); |
| 1466 | |
| 1467 | memcpy (&(deprecated_registers |
| 1468 | [DEPRECATED_REGISTER_BYTE |
| 1469 | (tdep->ppc_fp0_regnum + 1 + f_argno)]), |
| 1470 | VALUE_CONTENTS (arg), |
| 1471 | len); |
| 1472 | ++f_argno; |
| 1473 | } |
| 1474 | |
| 1475 | write_memory (sp + 24 + (ii * 4), |
| 1476 | (char *) VALUE_CONTENTS (arg), |
| 1477 | len); |
| 1478 | ii += ((len + 3) & -4) / 4; |
| 1479 | } |
| 1480 | } |
| 1481 | |
| 1482 | /* Set the stack pointer. According to the ABI, the SP is meant to |
| 1483 | be set _before_ the corresponding stack space is used. On AIX, |
| 1484 | this even applies when the target has been completely stopped! |
| 1485 | Not doing this can lead to conflicts with the kernel which thinks |
| 1486 | that it still has control over this not-yet-allocated stack |
| 1487 | region. */ |
| 1488 | regcache_raw_write_signed (regcache, SP_REGNUM, sp); |
| 1489 | |
| 1490 | /* Set back chain properly. */ |
| 1491 | store_unsigned_integer (tmp_buffer, 4, saved_sp); |
| 1492 | write_memory (sp, tmp_buffer, 4); |
| 1493 | |
| 1494 | /* Point the inferior function call's return address at the dummy's |
| 1495 | breakpoint. */ |
| 1496 | regcache_raw_write_signed (regcache, tdep->ppc_lr_regnum, bp_addr); |
| 1497 | |
| 1498 | /* Set the TOC register, get the value from the objfile reader |
| 1499 | which, in turn, gets it from the VMAP table. */ |
| 1500 | if (rs6000_find_toc_address_hook != NULL) |
| 1501 | { |
| 1502 | CORE_ADDR tocvalue = (*rs6000_find_toc_address_hook) (func_addr); |
| 1503 | regcache_raw_write_signed (regcache, tdep->ppc_toc_regnum, tocvalue); |
| 1504 | } |
| 1505 | |
| 1506 | target_store_registers (-1); |
| 1507 | return sp; |
| 1508 | } |
| 1509 | |
| 1510 | /* PowerOpen always puts structures in memory. Vectors, which were |
| 1511 | added later, do get returned in a register though. */ |
| 1512 | |
| 1513 | static int |
| 1514 | rs6000_use_struct_convention (int gcc_p, struct type *value_type) |
| 1515 | { |
| 1516 | if ((TYPE_LENGTH (value_type) == 16 || TYPE_LENGTH (value_type) == 8) |
| 1517 | && TYPE_VECTOR (value_type)) |
| 1518 | return 0; |
| 1519 | return 1; |
| 1520 | } |
| 1521 | |
| 1522 | static void |
| 1523 | rs6000_extract_return_value (struct type *valtype, char *regbuf, char *valbuf) |
| 1524 | { |
| 1525 | int offset = 0; |
| 1526 | struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); |
| 1527 | |
| 1528 | /* The calling convention this function implements assumes the |
| 1529 | processor has floating-point registers. We shouldn't be using it |
| 1530 | on PPC variants that lack them. */ |
| 1531 | gdb_assert (ppc_floating_point_unit_p (current_gdbarch)); |
| 1532 | |
| 1533 | if (TYPE_CODE (valtype) == TYPE_CODE_FLT) |
| 1534 | { |
| 1535 | |
| 1536 | /* floats and doubles are returned in fpr1. fpr's have a size of 8 bytes. |
| 1537 | We need to truncate the return value into float size (4 byte) if |
| 1538 | necessary. */ |
| 1539 | |
| 1540 | convert_typed_floating (®buf[DEPRECATED_REGISTER_BYTE |
| 1541 | (tdep->ppc_fp0_regnum + 1)], |
| 1542 | builtin_type_double, |
| 1543 | valbuf, |
| 1544 | valtype); |
| 1545 | } |
| 1546 | else if (TYPE_CODE (valtype) == TYPE_CODE_ARRAY |
| 1547 | && TYPE_LENGTH (valtype) == 16 |
| 1548 | && TYPE_VECTOR (valtype)) |
| 1549 | { |
| 1550 | memcpy (valbuf, regbuf + DEPRECATED_REGISTER_BYTE (tdep->ppc_vr0_regnum + 2), |
| 1551 | TYPE_LENGTH (valtype)); |
| 1552 | } |
| 1553 | else |
| 1554 | { |
| 1555 | /* return value is copied starting from r3. */ |
| 1556 | if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG |
| 1557 | && TYPE_LENGTH (valtype) < DEPRECATED_REGISTER_RAW_SIZE (3)) |
| 1558 | offset = DEPRECATED_REGISTER_RAW_SIZE (3) - TYPE_LENGTH (valtype); |
| 1559 | |
| 1560 | memcpy (valbuf, |
| 1561 | regbuf + DEPRECATED_REGISTER_BYTE (3) + offset, |
| 1562 | TYPE_LENGTH (valtype)); |
| 1563 | } |
| 1564 | } |
| 1565 | |
| 1566 | /* Return whether handle_inferior_event() should proceed through code |
| 1567 | starting at PC in function NAME when stepping. |
| 1568 | |
| 1569 | The AIX -bbigtoc linker option generates functions @FIX0, @FIX1, etc. to |
| 1570 | handle memory references that are too distant to fit in instructions |
| 1571 | generated by the compiler. For example, if 'foo' in the following |
| 1572 | instruction: |
| 1573 | |
| 1574 | lwz r9,foo(r2) |
| 1575 | |
| 1576 | is greater than 32767, the linker might replace the lwz with a branch to |
| 1577 | somewhere in @FIX1 that does the load in 2 instructions and then branches |
| 1578 | back to where execution should continue. |
| 1579 | |
| 1580 | GDB should silently step over @FIX code, just like AIX dbx does. |
| 1581 | Unfortunately, the linker uses the "b" instruction for the branches, |
| 1582 | meaning that the link register doesn't get set. Therefore, GDB's usual |
| 1583 | step_over_function() mechanism won't work. |
| 1584 | |
| 1585 | Instead, use the IN_SOLIB_RETURN_TRAMPOLINE and SKIP_TRAMPOLINE_CODE hooks |
| 1586 | in handle_inferior_event() to skip past @FIX code. */ |
| 1587 | |
| 1588 | int |
| 1589 | rs6000_in_solib_return_trampoline (CORE_ADDR pc, char *name) |
| 1590 | { |
| 1591 | return name && !strncmp (name, "@FIX", 4); |
| 1592 | } |
| 1593 | |
| 1594 | /* Skip code that the user doesn't want to see when stepping: |
| 1595 | |
| 1596 | 1. Indirect function calls use a piece of trampoline code to do context |
| 1597 | switching, i.e. to set the new TOC table. Skip such code if we are on |
| 1598 | its first instruction (as when we have single-stepped to here). |
| 1599 | |
| 1600 | 2. Skip shared library trampoline code (which is different from |
| 1601 | indirect function call trampolines). |
| 1602 | |
| 1603 | 3. Skip bigtoc fixup code. |
| 1604 | |
| 1605 | Result is desired PC to step until, or NULL if we are not in |
| 1606 | code that should be skipped. */ |
| 1607 | |
| 1608 | CORE_ADDR |
| 1609 | rs6000_skip_trampoline_code (CORE_ADDR pc) |
| 1610 | { |
| 1611 | unsigned int ii, op; |
| 1612 | int rel; |
| 1613 | CORE_ADDR solib_target_pc; |
| 1614 | struct minimal_symbol *msymbol; |
| 1615 | |
| 1616 | static unsigned trampoline_code[] = |
| 1617 | { |
| 1618 | 0x800b0000, /* l r0,0x0(r11) */ |
| 1619 | 0x90410014, /* st r2,0x14(r1) */ |
| 1620 | 0x7c0903a6, /* mtctr r0 */ |
| 1621 | 0x804b0004, /* l r2,0x4(r11) */ |
| 1622 | 0x816b0008, /* l r11,0x8(r11) */ |
| 1623 | 0x4e800420, /* bctr */ |
| 1624 | 0x4e800020, /* br */ |
| 1625 | 0 |
| 1626 | }; |
| 1627 | |
| 1628 | /* Check for bigtoc fixup code. */ |
| 1629 | msymbol = lookup_minimal_symbol_by_pc (pc); |
| 1630 | if (msymbol && rs6000_in_solib_return_trampoline (pc, DEPRECATED_SYMBOL_NAME (msymbol))) |
| 1631 | { |
| 1632 | /* Double-check that the third instruction from PC is relative "b". */ |
| 1633 | op = read_memory_integer (pc + 8, 4); |
| 1634 | if ((op & 0xfc000003) == 0x48000000) |
| 1635 | { |
| 1636 | /* Extract bits 6-29 as a signed 24-bit relative word address and |
| 1637 | add it to the containing PC. */ |
| 1638 | rel = ((int)(op << 6) >> 6); |
| 1639 | return pc + 8 + rel; |
| 1640 | } |
| 1641 | } |
| 1642 | |
| 1643 | /* If pc is in a shared library trampoline, return its target. */ |
| 1644 | solib_target_pc = find_solib_trampoline_target (pc); |
| 1645 | if (solib_target_pc) |
| 1646 | return solib_target_pc; |
| 1647 | |
| 1648 | for (ii = 0; trampoline_code[ii]; ++ii) |
| 1649 | { |
| 1650 | op = read_memory_integer (pc + (ii * 4), 4); |
| 1651 | if (op != trampoline_code[ii]) |
| 1652 | return 0; |
| 1653 | } |
| 1654 | ii = read_register (11); /* r11 holds destination addr */ |
| 1655 | pc = read_memory_addr (ii, gdbarch_tdep (current_gdbarch)->wordsize); /* (r11) value */ |
| 1656 | return pc; |
| 1657 | } |
| 1658 | |
| 1659 | /* Return the size of register REG when words are WORDSIZE bytes long. If REG |
| 1660 | isn't available with that word size, return 0. */ |
| 1661 | |
| 1662 | static int |
| 1663 | regsize (const struct reg *reg, int wordsize) |
| 1664 | { |
| 1665 | return wordsize == 8 ? reg->sz64 : reg->sz32; |
| 1666 | } |
| 1667 | |
| 1668 | /* Return the name of register number N, or null if no such register exists |
| 1669 | in the current architecture. */ |
| 1670 | |
| 1671 | static const char * |
| 1672 | rs6000_register_name (int n) |
| 1673 | { |
| 1674 | struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); |
| 1675 | const struct reg *reg = tdep->regs + n; |
| 1676 | |
| 1677 | if (!regsize (reg, tdep->wordsize)) |
| 1678 | return NULL; |
| 1679 | return reg->name; |
| 1680 | } |
| 1681 | |
| 1682 | /* Return the GDB type object for the "standard" data type |
| 1683 | of data in register N. */ |
| 1684 | |
| 1685 | static struct type * |
| 1686 | rs6000_register_type (struct gdbarch *gdbarch, int n) |
| 1687 | { |
| 1688 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 1689 | const struct reg *reg = tdep->regs + n; |
| 1690 | |
| 1691 | if (reg->fpr) |
| 1692 | return builtin_type_double; |
| 1693 | else |
| 1694 | { |
| 1695 | int size = regsize (reg, tdep->wordsize); |
| 1696 | switch (size) |
| 1697 | { |
| 1698 | case 0: |
| 1699 | return builtin_type_int0; |
| 1700 | case 4: |
| 1701 | return builtin_type_uint32; |
| 1702 | case 8: |
| 1703 | if (tdep->ppc_ev0_regnum <= n && n <= tdep->ppc_ev31_regnum) |
| 1704 | return builtin_type_vec64; |
| 1705 | else |
| 1706 | return builtin_type_uint64; |
| 1707 | break; |
| 1708 | case 16: |
| 1709 | return builtin_type_vec128; |
| 1710 | break; |
| 1711 | default: |
| 1712 | internal_error (__FILE__, __LINE__, "Register %d size %d unknown", |
| 1713 | n, size); |
| 1714 | } |
| 1715 | } |
| 1716 | } |
| 1717 | |
| 1718 | /* The register format for RS/6000 floating point registers is always |
| 1719 | double, we need a conversion if the memory format is float. */ |
| 1720 | |
| 1721 | static int |
| 1722 | rs6000_convert_register_p (int regnum, struct type *type) |
| 1723 | { |
| 1724 | const struct reg *reg = gdbarch_tdep (current_gdbarch)->regs + regnum; |
| 1725 | |
| 1726 | return (reg->fpr |
| 1727 | && TYPE_CODE (type) == TYPE_CODE_FLT |
| 1728 | && TYPE_LENGTH (type) != TYPE_LENGTH (builtin_type_double)); |
| 1729 | } |
| 1730 | |
| 1731 | static void |
| 1732 | rs6000_register_to_value (struct frame_info *frame, |
| 1733 | int regnum, |
| 1734 | struct type *type, |
| 1735 | void *to) |
| 1736 | { |
| 1737 | const struct reg *reg = gdbarch_tdep (current_gdbarch)->regs + regnum; |
| 1738 | char from[MAX_REGISTER_SIZE]; |
| 1739 | |
| 1740 | gdb_assert (reg->fpr); |
| 1741 | gdb_assert (TYPE_CODE (type) == TYPE_CODE_FLT); |
| 1742 | |
| 1743 | get_frame_register (frame, regnum, from); |
| 1744 | convert_typed_floating (from, builtin_type_double, to, type); |
| 1745 | } |
| 1746 | |
| 1747 | static void |
| 1748 | rs6000_value_to_register (struct frame_info *frame, |
| 1749 | int regnum, |
| 1750 | struct type *type, |
| 1751 | const void *from) |
| 1752 | { |
| 1753 | const struct reg *reg = gdbarch_tdep (current_gdbarch)->regs + regnum; |
| 1754 | char to[MAX_REGISTER_SIZE]; |
| 1755 | |
| 1756 | gdb_assert (reg->fpr); |
| 1757 | gdb_assert (TYPE_CODE (type) == TYPE_CODE_FLT); |
| 1758 | |
| 1759 | convert_typed_floating (from, type, to, builtin_type_double); |
| 1760 | put_frame_register (frame, regnum, to); |
| 1761 | } |
| 1762 | |
| 1763 | static void |
| 1764 | e500_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache, |
| 1765 | int reg_nr, void *buffer) |
| 1766 | { |
| 1767 | int base_regnum; |
| 1768 | int offset = 0; |
| 1769 | char temp_buffer[MAX_REGISTER_SIZE]; |
| 1770 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 1771 | |
| 1772 | if (reg_nr >= tdep->ppc_gp0_regnum |
| 1773 | && reg_nr < tdep->ppc_gp0_regnum + ppc_num_gprs) |
| 1774 | { |
| 1775 | base_regnum = reg_nr - tdep->ppc_gp0_regnum + tdep->ppc_ev0_regnum; |
| 1776 | |
| 1777 | /* Build the value in the provided buffer. */ |
| 1778 | /* Read the raw register of which this one is the lower portion. */ |
| 1779 | regcache_raw_read (regcache, base_regnum, temp_buffer); |
| 1780 | if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| 1781 | offset = 4; |
| 1782 | memcpy ((char *) buffer, temp_buffer + offset, 4); |
| 1783 | } |
| 1784 | } |
| 1785 | |
| 1786 | static void |
| 1787 | e500_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache, |
| 1788 | int reg_nr, const void *buffer) |
| 1789 | { |
| 1790 | int base_regnum; |
| 1791 | int offset = 0; |
| 1792 | char temp_buffer[MAX_REGISTER_SIZE]; |
| 1793 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 1794 | |
| 1795 | if (reg_nr >= tdep->ppc_gp0_regnum |
| 1796 | && reg_nr < tdep->ppc_gp0_regnum + ppc_num_gprs) |
| 1797 | { |
| 1798 | base_regnum = reg_nr - tdep->ppc_gp0_regnum + tdep->ppc_ev0_regnum; |
| 1799 | /* reg_nr is 32 bit here, and base_regnum is 64 bits. */ |
| 1800 | if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| 1801 | offset = 4; |
| 1802 | |
| 1803 | /* Let's read the value of the base register into a temporary |
| 1804 | buffer, so that overwriting the last four bytes with the new |
| 1805 | value of the pseudo will leave the upper 4 bytes unchanged. */ |
| 1806 | regcache_raw_read (regcache, base_regnum, temp_buffer); |
| 1807 | |
| 1808 | /* Write as an 8 byte quantity. */ |
| 1809 | memcpy (temp_buffer + offset, (char *) buffer, 4); |
| 1810 | regcache_raw_write (regcache, base_regnum, temp_buffer); |
| 1811 | } |
| 1812 | } |
| 1813 | |
| 1814 | /* Convert a DBX STABS register number to a GDB register number. */ |
| 1815 | static int |
| 1816 | rs6000_stab_reg_to_regnum (int num) |
| 1817 | { |
| 1818 | struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); |
| 1819 | |
| 1820 | if (0 <= num && num <= 31) |
| 1821 | return tdep->ppc_gp0_regnum + num; |
| 1822 | else if (32 <= num && num <= 63) |
| 1823 | /* FIXME: jimb/2004-05-05: What should we do when the debug info |
| 1824 | specifies registers the architecture doesn't have? Our |
| 1825 | callers don't check the value we return. */ |
| 1826 | return tdep->ppc_fp0_regnum + (num - 32); |
| 1827 | else if (77 <= num && num <= 108) |
| 1828 | return tdep->ppc_vr0_regnum + (num - 77); |
| 1829 | else if (1200 <= num && num < 1200 + 32) |
| 1830 | return tdep->ppc_ev0_regnum + (num - 1200); |
| 1831 | else |
| 1832 | switch (num) |
| 1833 | { |
| 1834 | case 64: |
| 1835 | return tdep->ppc_mq_regnum; |
| 1836 | case 65: |
| 1837 | return tdep->ppc_lr_regnum; |
| 1838 | case 66: |
| 1839 | return tdep->ppc_ctr_regnum; |
| 1840 | case 76: |
| 1841 | return tdep->ppc_xer_regnum; |
| 1842 | case 109: |
| 1843 | return tdep->ppc_vrsave_regnum; |
| 1844 | case 110: |
| 1845 | return tdep->ppc_vrsave_regnum - 1; /* vscr */ |
| 1846 | case 111: |
| 1847 | return tdep->ppc_acc_regnum; |
| 1848 | case 112: |
| 1849 | return tdep->ppc_spefscr_regnum; |
| 1850 | default: |
| 1851 | return num; |
| 1852 | } |
| 1853 | } |
| 1854 | |
| 1855 | |
| 1856 | /* Convert a Dwarf 2 register number to a GDB register number. */ |
| 1857 | static int |
| 1858 | rs6000_dwarf2_reg_to_regnum (int num) |
| 1859 | { |
| 1860 | struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); |
| 1861 | |
| 1862 | if (0 <= num && num <= 31) |
| 1863 | return tdep->ppc_gp0_regnum + num; |
| 1864 | else if (32 <= num && num <= 63) |
| 1865 | /* FIXME: jimb/2004-05-05: What should we do when the debug info |
| 1866 | specifies registers the architecture doesn't have? Our |
| 1867 | callers don't check the value we return. */ |
| 1868 | return tdep->ppc_fp0_regnum + (num - 32); |
| 1869 | else if (1124 <= num && num < 1124 + 32) |
| 1870 | return tdep->ppc_vr0_regnum + (num - 1124); |
| 1871 | else if (1200 <= num && num < 1200 + 32) |
| 1872 | return tdep->ppc_ev0_regnum + (num - 1200); |
| 1873 | else |
| 1874 | switch (num) |
| 1875 | { |
| 1876 | case 67: |
| 1877 | return tdep->ppc_vrsave_regnum - 1; /* vscr */ |
| 1878 | case 99: |
| 1879 | return tdep->ppc_acc_regnum; |
| 1880 | case 100: |
| 1881 | return tdep->ppc_mq_regnum; |
| 1882 | case 101: |
| 1883 | return tdep->ppc_xer_regnum; |
| 1884 | case 108: |
| 1885 | return tdep->ppc_lr_regnum; |
| 1886 | case 109: |
| 1887 | return tdep->ppc_ctr_regnum; |
| 1888 | case 356: |
| 1889 | return tdep->ppc_vrsave_regnum; |
| 1890 | case 612: |
| 1891 | return tdep->ppc_spefscr_regnum; |
| 1892 | default: |
| 1893 | return num; |
| 1894 | } |
| 1895 | } |
| 1896 | |
| 1897 | |
| 1898 | static void |
| 1899 | rs6000_store_return_value (struct type *type, |
| 1900 | struct regcache *regcache, |
| 1901 | const void *valbuf) |
| 1902 | { |
| 1903 | struct gdbarch *gdbarch = get_regcache_arch (regcache); |
| 1904 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 1905 | int regnum = -1; |
| 1906 | |
| 1907 | /* The calling convention this function implements assumes the |
| 1908 | processor has floating-point registers. We shouldn't be using it |
| 1909 | on PPC variants that lack them. */ |
| 1910 | gdb_assert (ppc_floating_point_unit_p (gdbarch)); |
| 1911 | |
| 1912 | if (TYPE_CODE (type) == TYPE_CODE_FLT) |
| 1913 | /* Floating point values are returned starting from FPR1 and up. |
| 1914 | Say a double_double_double type could be returned in |
| 1915 | FPR1/FPR2/FPR3 triple. */ |
| 1916 | regnum = tdep->ppc_fp0_regnum + 1; |
| 1917 | else if (TYPE_CODE (type) == TYPE_CODE_ARRAY) |
| 1918 | { |
| 1919 | if (TYPE_LENGTH (type) == 16 |
| 1920 | && TYPE_VECTOR (type)) |
| 1921 | regnum = tdep->ppc_vr0_regnum + 2; |
| 1922 | else |
| 1923 | gdb_assert (0); |
| 1924 | } |
| 1925 | else |
| 1926 | /* Everything else is returned in GPR3 and up. */ |
| 1927 | regnum = tdep->ppc_gp0_regnum + 3; |
| 1928 | |
| 1929 | { |
| 1930 | size_t bytes_written = 0; |
| 1931 | |
| 1932 | while (bytes_written < TYPE_LENGTH (type)) |
| 1933 | { |
| 1934 | /* How much of this value can we write to this register? */ |
| 1935 | size_t bytes_to_write = min (TYPE_LENGTH (type) - bytes_written, |
| 1936 | register_size (gdbarch, regnum)); |
| 1937 | regcache_cooked_write_part (regcache, regnum, |
| 1938 | 0, bytes_to_write, |
| 1939 | (char *) valbuf + bytes_written); |
| 1940 | regnum++; |
| 1941 | bytes_written += bytes_to_write; |
| 1942 | } |
| 1943 | } |
| 1944 | } |
| 1945 | |
| 1946 | |
| 1947 | /* Extract from an array REGBUF containing the (raw) register state |
| 1948 | the address in which a function should return its structure value, |
| 1949 | as a CORE_ADDR (or an expression that can be used as one). */ |
| 1950 | |
| 1951 | static CORE_ADDR |
| 1952 | rs6000_extract_struct_value_address (struct regcache *regcache) |
| 1953 | { |
| 1954 | /* FIXME: cagney/2002-09-26: PR gdb/724: When making an inferior |
| 1955 | function call GDB knows the address of the struct return value |
| 1956 | and hence, should not need to call this function. Unfortunately, |
| 1957 | the current call_function_by_hand() code only saves the most |
| 1958 | recent struct address leading to occasional calls. The code |
| 1959 | should instead maintain a stack of such addresses (in the dummy |
| 1960 | frame object). */ |
| 1961 | /* NOTE: cagney/2002-09-26: Return 0 which indicates that we've |
| 1962 | really got no idea where the return value is being stored. While |
| 1963 | r3, on function entry, contained the address it will have since |
| 1964 | been reused (scratch) and hence wouldn't be valid */ |
| 1965 | return 0; |
| 1966 | } |
| 1967 | |
| 1968 | /* Hook called when a new child process is started. */ |
| 1969 | |
| 1970 | void |
| 1971 | rs6000_create_inferior (int pid) |
| 1972 | { |
| 1973 | if (rs6000_set_host_arch_hook) |
| 1974 | rs6000_set_host_arch_hook (pid); |
| 1975 | } |
| 1976 | \f |
| 1977 | /* Support for CONVERT_FROM_FUNC_PTR_ADDR (ARCH, ADDR, TARG). |
| 1978 | |
| 1979 | Usually a function pointer's representation is simply the address |
| 1980 | of the function. On the RS/6000 however, a function pointer is |
| 1981 | represented by a pointer to a TOC entry. This TOC entry contains |
| 1982 | three words, the first word is the address of the function, the |
| 1983 | second word is the TOC pointer (r2), and the third word is the |
| 1984 | static chain value. Throughout GDB it is currently assumed that a |
| 1985 | function pointer contains the address of the function, which is not |
| 1986 | easy to fix. In addition, the conversion of a function address to |
| 1987 | a function pointer would require allocation of a TOC entry in the |
| 1988 | inferior's memory space, with all its drawbacks. To be able to |
| 1989 | call C++ virtual methods in the inferior (which are called via |
| 1990 | function pointers), find_function_addr uses this function to get the |
| 1991 | function address from a function pointer. */ |
| 1992 | |
| 1993 | /* Return real function address if ADDR (a function pointer) is in the data |
| 1994 | space and is therefore a special function pointer. */ |
| 1995 | |
| 1996 | static CORE_ADDR |
| 1997 | rs6000_convert_from_func_ptr_addr (struct gdbarch *gdbarch, |
| 1998 | CORE_ADDR addr, |
| 1999 | struct target_ops *targ) |
| 2000 | { |
| 2001 | struct obj_section *s; |
| 2002 | |
| 2003 | s = find_pc_section (addr); |
| 2004 | if (s && s->the_bfd_section->flags & SEC_CODE) |
| 2005 | return addr; |
| 2006 | |
| 2007 | /* ADDR is in the data space, so it's a special function pointer. */ |
| 2008 | return read_memory_addr (addr, gdbarch_tdep (current_gdbarch)->wordsize); |
| 2009 | } |
| 2010 | \f |
| 2011 | |
| 2012 | /* Handling the various POWER/PowerPC variants. */ |
| 2013 | |
| 2014 | |
| 2015 | /* The arrays here called registers_MUMBLE hold information about available |
| 2016 | registers. |
| 2017 | |
| 2018 | For each family of PPC variants, I've tried to isolate out the |
| 2019 | common registers and put them up front, so that as long as you get |
| 2020 | the general family right, GDB will correctly identify the registers |
| 2021 | common to that family. The common register sets are: |
| 2022 | |
| 2023 | For the 60x family: hid0 hid1 iabr dabr pir |
| 2024 | |
| 2025 | For the 505 and 860 family: eie eid nri |
| 2026 | |
| 2027 | For the 403 and 403GC: icdbdr esr dear evpr cdbcr tsr tcr pit tbhi |
| 2028 | tblo srr2 srr3 dbsr dbcr iac1 iac2 dac1 dac2 dccr iccr pbl1 |
| 2029 | pbu1 pbl2 pbu2 |
| 2030 | |
| 2031 | Most of these register groups aren't anything formal. I arrived at |
| 2032 | them by looking at the registers that occurred in more than one |
| 2033 | processor. |
| 2034 | |
| 2035 | Note: kevinb/2002-04-30: Support for the fpscr register was added |
| 2036 | during April, 2002. Slot 70 is being used for PowerPC and slot 71 |
| 2037 | for Power. For PowerPC, slot 70 was unused and was already in the |
| 2038 | PPC_UISA_SPRS which is ideally where fpscr should go. For Power, |
| 2039 | slot 70 was being used for "mq", so the next available slot (71) |
| 2040 | was chosen. It would have been nice to be able to make the |
| 2041 | register numbers the same across processor cores, but this wasn't |
| 2042 | possible without either 1) renumbering some registers for some |
| 2043 | processors or 2) assigning fpscr to a really high slot that's |
| 2044 | larger than any current register number. Doing (1) is bad because |
| 2045 | existing stubs would break. Doing (2) is undesirable because it |
| 2046 | would introduce a really large gap between fpscr and the rest of |
| 2047 | the registers for most processors. */ |
| 2048 | |
| 2049 | /* Convenience macros for populating register arrays. */ |
| 2050 | |
| 2051 | /* Within another macro, convert S to a string. */ |
| 2052 | |
| 2053 | #define STR(s) #s |
| 2054 | |
| 2055 | /* Return a struct reg defining register NAME that's 32 bits on 32-bit systems |
| 2056 | and 64 bits on 64-bit systems. */ |
| 2057 | #define R(name) { STR(name), 4, 8, 0, 0 } |
| 2058 | |
| 2059 | /* Return a struct reg defining register NAME that's 32 bits on all |
| 2060 | systems. */ |
| 2061 | #define R4(name) { STR(name), 4, 4, 0, 0 } |
| 2062 | |
| 2063 | /* Return a struct reg defining register NAME that's 64 bits on all |
| 2064 | systems. */ |
| 2065 | #define R8(name) { STR(name), 8, 8, 0, 0 } |
| 2066 | |
| 2067 | /* Return a struct reg defining register NAME that's 128 bits on all |
| 2068 | systems. */ |
| 2069 | #define R16(name) { STR(name), 16, 16, 0, 0 } |
| 2070 | |
| 2071 | /* Return a struct reg defining floating-point register NAME. */ |
| 2072 | #define F(name) { STR(name), 8, 8, 1, 0 } |
| 2073 | |
| 2074 | /* Return a struct reg defining a pseudo register NAME. */ |
| 2075 | #define P(name) { STR(name), 4, 8, 0, 1} |
| 2076 | |
| 2077 | /* Return a struct reg defining register NAME that's 32 bits on 32-bit |
| 2078 | systems and that doesn't exist on 64-bit systems. */ |
| 2079 | #define R32(name) { STR(name), 4, 0, 0, 0 } |
| 2080 | |
| 2081 | /* Return a struct reg defining register NAME that's 64 bits on 64-bit |
| 2082 | systems and that doesn't exist on 32-bit systems. */ |
| 2083 | #define R64(name) { STR(name), 0, 8, 0, 0 } |
| 2084 | |
| 2085 | /* Return a struct reg placeholder for a register that doesn't exist. */ |
| 2086 | #define R0 { 0, 0, 0, 0, 0 } |
| 2087 | |
| 2088 | /* UISA registers common across all architectures, including POWER. */ |
| 2089 | |
| 2090 | #define COMMON_UISA_REGS \ |
| 2091 | /* 0 */ R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), \ |
| 2092 | /* 8 */ R(r8), R(r9), R(r10),R(r11),R(r12),R(r13),R(r14),R(r15), \ |
| 2093 | /* 16 */ R(r16),R(r17),R(r18),R(r19),R(r20),R(r21),R(r22),R(r23), \ |
| 2094 | /* 24 */ R(r24),R(r25),R(r26),R(r27),R(r28),R(r29),R(r30),R(r31), \ |
| 2095 | /* 32 */ F(f0), F(f1), F(f2), F(f3), F(f4), F(f5), F(f6), F(f7), \ |
| 2096 | /* 40 */ F(f8), F(f9), F(f10),F(f11),F(f12),F(f13),F(f14),F(f15), \ |
| 2097 | /* 48 */ F(f16),F(f17),F(f18),F(f19),F(f20),F(f21),F(f22),F(f23), \ |
| 2098 | /* 56 */ F(f24),F(f25),F(f26),F(f27),F(f28),F(f29),F(f30),F(f31), \ |
| 2099 | /* 64 */ R(pc), R(ps) |
| 2100 | |
| 2101 | #define COMMON_UISA_NOFP_REGS \ |
| 2102 | /* 0 */ R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), \ |
| 2103 | /* 8 */ R(r8), R(r9), R(r10),R(r11),R(r12),R(r13),R(r14),R(r15), \ |
| 2104 | /* 16 */ R(r16),R(r17),R(r18),R(r19),R(r20),R(r21),R(r22),R(r23), \ |
| 2105 | /* 24 */ R(r24),R(r25),R(r26),R(r27),R(r28),R(r29),R(r30),R(r31), \ |
| 2106 | /* 32 */ R0, R0, R0, R0, R0, R0, R0, R0, \ |
| 2107 | /* 40 */ R0, R0, R0, R0, R0, R0, R0, R0, \ |
| 2108 | /* 48 */ R0, R0, R0, R0, R0, R0, R0, R0, \ |
| 2109 | /* 56 */ R0, R0, R0, R0, R0, R0, R0, R0, \ |
| 2110 | /* 64 */ R(pc), R(ps) |
| 2111 | |
| 2112 | /* UISA-level SPRs for PowerPC. */ |
| 2113 | #define PPC_UISA_SPRS \ |
| 2114 | /* 66 */ R4(cr), R(lr), R(ctr), R4(xer), R4(fpscr) |
| 2115 | |
| 2116 | /* UISA-level SPRs for PowerPC without floating point support. */ |
| 2117 | #define PPC_UISA_NOFP_SPRS \ |
| 2118 | /* 66 */ R4(cr), R(lr), R(ctr), R4(xer), R0 |
| 2119 | |
| 2120 | /* Segment registers, for PowerPC. */ |
| 2121 | #define PPC_SEGMENT_REGS \ |
| 2122 | /* 71 */ R32(sr0), R32(sr1), R32(sr2), R32(sr3), \ |
| 2123 | /* 75 */ R32(sr4), R32(sr5), R32(sr6), R32(sr7), \ |
| 2124 | /* 79 */ R32(sr8), R32(sr9), R32(sr10), R32(sr11), \ |
| 2125 | /* 83 */ R32(sr12), R32(sr13), R32(sr14), R32(sr15) |
| 2126 | |
| 2127 | /* OEA SPRs for PowerPC. */ |
| 2128 | #define PPC_OEA_SPRS \ |
| 2129 | /* 87 */ R4(pvr), \ |
| 2130 | /* 88 */ R(ibat0u), R(ibat0l), R(ibat1u), R(ibat1l), \ |
| 2131 | /* 92 */ R(ibat2u), R(ibat2l), R(ibat3u), R(ibat3l), \ |
| 2132 | /* 96 */ R(dbat0u), R(dbat0l), R(dbat1u), R(dbat1l), \ |
| 2133 | /* 100 */ R(dbat2u), R(dbat2l), R(dbat3u), R(dbat3l), \ |
| 2134 | /* 104 */ R(sdr1), R64(asr), R(dar), R4(dsisr), \ |
| 2135 | /* 108 */ R(sprg0), R(sprg1), R(sprg2), R(sprg3), \ |
| 2136 | /* 112 */ R(srr0), R(srr1), R(tbl), R(tbu), \ |
| 2137 | /* 116 */ R4(dec), R(dabr), R4(ear) |
| 2138 | |
| 2139 | /* AltiVec registers. */ |
| 2140 | #define PPC_ALTIVEC_REGS \ |
| 2141 | /*119*/R16(vr0), R16(vr1), R16(vr2), R16(vr3), R16(vr4), R16(vr5), R16(vr6), R16(vr7), \ |
| 2142 | /*127*/R16(vr8), R16(vr9), R16(vr10),R16(vr11),R16(vr12),R16(vr13),R16(vr14),R16(vr15), \ |
| 2143 | /*135*/R16(vr16),R16(vr17),R16(vr18),R16(vr19),R16(vr20),R16(vr21),R16(vr22),R16(vr23), \ |
| 2144 | /*143*/R16(vr24),R16(vr25),R16(vr26),R16(vr27),R16(vr28),R16(vr29),R16(vr30),R16(vr31), \ |
| 2145 | /*151*/R4(vscr), R4(vrsave) |
| 2146 | |
| 2147 | /* Vectors of hi-lo general purpose registers. */ |
| 2148 | #define PPC_EV_REGS \ |
| 2149 | /* 0*/R8(ev0), R8(ev1), R8(ev2), R8(ev3), R8(ev4), R8(ev5), R8(ev6), R8(ev7), \ |
| 2150 | /* 8*/R8(ev8), R8(ev9), R8(ev10),R8(ev11),R8(ev12),R8(ev13),R8(ev14),R8(ev15), \ |
| 2151 | /*16*/R8(ev16),R8(ev17),R8(ev18),R8(ev19),R8(ev20),R8(ev21),R8(ev22),R8(ev23), \ |
| 2152 | /*24*/R8(ev24),R8(ev25),R8(ev26),R8(ev27),R8(ev28),R8(ev29),R8(ev30),R8(ev31) |
| 2153 | |
| 2154 | /* Lower half of the EV registers. */ |
| 2155 | #define PPC_GPRS_PSEUDO_REGS \ |
| 2156 | /* 0 */ P(r0), P(r1), P(r2), P(r3), P(r4), P(r5), P(r6), P(r7), \ |
| 2157 | /* 8 */ P(r8), P(r9), P(r10),P(r11),P(r12),P(r13),P(r14),P(r15), \ |
| 2158 | /* 16 */ P(r16),P(r17),P(r18),P(r19),P(r20),P(r21),P(r22),P(r23), \ |
| 2159 | /* 24 */ P(r24),P(r25),P(r26),P(r27),P(r28),P(r29),P(r30),P(r31) |
| 2160 | |
| 2161 | /* IBM POWER (pre-PowerPC) architecture, user-level view. We only cover |
| 2162 | user-level SPR's. */ |
| 2163 | static const struct reg registers_power[] = |
| 2164 | { |
| 2165 | COMMON_UISA_REGS, |
| 2166 | /* 66 */ R4(cnd), R(lr), R(cnt), R4(xer), R4(mq), |
| 2167 | /* 71 */ R4(fpscr) |
| 2168 | }; |
| 2169 | |
| 2170 | /* PowerPC UISA - a PPC processor as viewed by user-level code. A UISA-only |
| 2171 | view of the PowerPC. */ |
| 2172 | static const struct reg registers_powerpc[] = |
| 2173 | { |
| 2174 | COMMON_UISA_REGS, |
| 2175 | PPC_UISA_SPRS, |
| 2176 | PPC_ALTIVEC_REGS |
| 2177 | }; |
| 2178 | |
| 2179 | /* PowerPC UISA - a PPC processor as viewed by user-level |
| 2180 | code, but without floating point registers. */ |
| 2181 | static const struct reg registers_powerpc_nofp[] = |
| 2182 | { |
| 2183 | COMMON_UISA_NOFP_REGS, |
| 2184 | PPC_UISA_SPRS |
| 2185 | }; |
| 2186 | |
| 2187 | /* IBM PowerPC 403. */ |
| 2188 | static const struct reg registers_403[] = |
| 2189 | { |
| 2190 | COMMON_UISA_REGS, |
| 2191 | PPC_UISA_SPRS, |
| 2192 | PPC_SEGMENT_REGS, |
| 2193 | PPC_OEA_SPRS, |
| 2194 | /* 119 */ R(icdbdr), R(esr), R(dear), R(evpr), |
| 2195 | /* 123 */ R(cdbcr), R(tsr), R(tcr), R(pit), |
| 2196 | /* 127 */ R(tbhi), R(tblo), R(srr2), R(srr3), |
| 2197 | /* 131 */ R(dbsr), R(dbcr), R(iac1), R(iac2), |
| 2198 | /* 135 */ R(dac1), R(dac2), R(dccr), R(iccr), |
| 2199 | /* 139 */ R(pbl1), R(pbu1), R(pbl2), R(pbu2) |
| 2200 | }; |
| 2201 | |
| 2202 | /* IBM PowerPC 403GC. */ |
| 2203 | static const struct reg registers_403GC[] = |
| 2204 | { |
| 2205 | COMMON_UISA_REGS, |
| 2206 | PPC_UISA_SPRS, |
| 2207 | PPC_SEGMENT_REGS, |
| 2208 | PPC_OEA_SPRS, |
| 2209 | /* 119 */ R(icdbdr), R(esr), R(dear), R(evpr), |
| 2210 | /* 123 */ R(cdbcr), R(tsr), R(tcr), R(pit), |
| 2211 | /* 127 */ R(tbhi), R(tblo), R(srr2), R(srr3), |
| 2212 | /* 131 */ R(dbsr), R(dbcr), R(iac1), R(iac2), |
| 2213 | /* 135 */ R(dac1), R(dac2), R(dccr), R(iccr), |
| 2214 | /* 139 */ R(pbl1), R(pbu1), R(pbl2), R(pbu2), |
| 2215 | /* 143 */ R(zpr), R(pid), R(sgr), R(dcwr), |
| 2216 | /* 147 */ R(tbhu), R(tblu) |
| 2217 | }; |
| 2218 | |
| 2219 | /* Motorola PowerPC 505. */ |
| 2220 | static const struct reg registers_505[] = |
| 2221 | { |
| 2222 | COMMON_UISA_REGS, |
| 2223 | PPC_UISA_SPRS, |
| 2224 | PPC_SEGMENT_REGS, |
| 2225 | PPC_OEA_SPRS, |
| 2226 | /* 119 */ R(eie), R(eid), R(nri) |
| 2227 | }; |
| 2228 | |
| 2229 | /* Motorola PowerPC 860 or 850. */ |
| 2230 | static const struct reg registers_860[] = |
| 2231 | { |
| 2232 | COMMON_UISA_REGS, |
| 2233 | PPC_UISA_SPRS, |
| 2234 | PPC_SEGMENT_REGS, |
| 2235 | PPC_OEA_SPRS, |
| 2236 | /* 119 */ R(eie), R(eid), R(nri), R(cmpa), |
| 2237 | /* 123 */ R(cmpb), R(cmpc), R(cmpd), R(icr), |
| 2238 | /* 127 */ R(der), R(counta), R(countb), R(cmpe), |
| 2239 | /* 131 */ R(cmpf), R(cmpg), R(cmph), R(lctrl1), |
| 2240 | /* 135 */ R(lctrl2), R(ictrl), R(bar), R(ic_cst), |
| 2241 | /* 139 */ R(ic_adr), R(ic_dat), R(dc_cst), R(dc_adr), |
| 2242 | /* 143 */ R(dc_dat), R(dpdr), R(dpir), R(immr), |
| 2243 | /* 147 */ R(mi_ctr), R(mi_ap), R(mi_epn), R(mi_twc), |
| 2244 | /* 151 */ R(mi_rpn), R(md_ctr), R(m_casid), R(md_ap), |
| 2245 | /* 155 */ R(md_epn), R(md_twb), R(md_twc), R(md_rpn), |
| 2246 | /* 159 */ R(m_tw), R(mi_dbcam), R(mi_dbram0), R(mi_dbram1), |
| 2247 | /* 163 */ R(md_dbcam), R(md_dbram0), R(md_dbram1) |
| 2248 | }; |
| 2249 | |
| 2250 | /* Motorola PowerPC 601. Note that the 601 has different register numbers |
| 2251 | for reading and writing RTCU and RTCL. However, how one reads and writes a |
| 2252 | register is the stub's problem. */ |
| 2253 | static const struct reg registers_601[] = |
| 2254 | { |
| 2255 | COMMON_UISA_REGS, |
| 2256 | PPC_UISA_SPRS, |
| 2257 | PPC_SEGMENT_REGS, |
| 2258 | PPC_OEA_SPRS, |
| 2259 | /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr), |
| 2260 | /* 123 */ R(pir), R(mq), R(rtcu), R(rtcl) |
| 2261 | }; |
| 2262 | |
| 2263 | /* Motorola PowerPC 602. */ |
| 2264 | static const struct reg registers_602[] = |
| 2265 | { |
| 2266 | COMMON_UISA_REGS, |
| 2267 | PPC_UISA_SPRS, |
| 2268 | PPC_SEGMENT_REGS, |
| 2269 | PPC_OEA_SPRS, |
| 2270 | /* 119 */ R(hid0), R(hid1), R(iabr), R0, |
| 2271 | /* 123 */ R0, R(tcr), R(ibr), R(esassr), |
| 2272 | /* 127 */ R(sebr), R(ser), R(sp), R(lt) |
| 2273 | }; |
| 2274 | |
| 2275 | /* Motorola/IBM PowerPC 603 or 603e. */ |
| 2276 | static const struct reg registers_603[] = |
| 2277 | { |
| 2278 | COMMON_UISA_REGS, |
| 2279 | PPC_UISA_SPRS, |
| 2280 | PPC_SEGMENT_REGS, |
| 2281 | PPC_OEA_SPRS, |
| 2282 | /* 119 */ R(hid0), R(hid1), R(iabr), R0, |
| 2283 | /* 123 */ R0, R(dmiss), R(dcmp), R(hash1), |
| 2284 | /* 127 */ R(hash2), R(imiss), R(icmp), R(rpa) |
| 2285 | }; |
| 2286 | |
| 2287 | /* Motorola PowerPC 604 or 604e. */ |
| 2288 | static const struct reg registers_604[] = |
| 2289 | { |
| 2290 | COMMON_UISA_REGS, |
| 2291 | PPC_UISA_SPRS, |
| 2292 | PPC_SEGMENT_REGS, |
| 2293 | PPC_OEA_SPRS, |
| 2294 | /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr), |
| 2295 | /* 123 */ R(pir), R(mmcr0), R(pmc1), R(pmc2), |
| 2296 | /* 127 */ R(sia), R(sda) |
| 2297 | }; |
| 2298 | |
| 2299 | /* Motorola/IBM PowerPC 750 or 740. */ |
| 2300 | static const struct reg registers_750[] = |
| 2301 | { |
| 2302 | COMMON_UISA_REGS, |
| 2303 | PPC_UISA_SPRS, |
| 2304 | PPC_SEGMENT_REGS, |
| 2305 | PPC_OEA_SPRS, |
| 2306 | /* 119 */ R(hid0), R(hid1), R(iabr), R(dabr), |
| 2307 | /* 123 */ R0, R(ummcr0), R(upmc1), R(upmc2), |
| 2308 | /* 127 */ R(usia), R(ummcr1), R(upmc3), R(upmc4), |
| 2309 | /* 131 */ R(mmcr0), R(pmc1), R(pmc2), R(sia), |
| 2310 | /* 135 */ R(mmcr1), R(pmc3), R(pmc4), R(l2cr), |
| 2311 | /* 139 */ R(ictc), R(thrm1), R(thrm2), R(thrm3) |
| 2312 | }; |
| 2313 | |
| 2314 | |
| 2315 | /* Motorola PowerPC 7400. */ |
| 2316 | static const struct reg registers_7400[] = |
| 2317 | { |
| 2318 | /* gpr0-gpr31, fpr0-fpr31 */ |
| 2319 | COMMON_UISA_REGS, |
| 2320 | /* cr, lr, ctr, xer, fpscr */ |
| 2321 | PPC_UISA_SPRS, |
| 2322 | /* sr0-sr15 */ |
| 2323 | PPC_SEGMENT_REGS, |
| 2324 | PPC_OEA_SPRS, |
| 2325 | /* vr0-vr31, vrsave, vscr */ |
| 2326 | PPC_ALTIVEC_REGS |
| 2327 | /* FIXME? Add more registers? */ |
| 2328 | }; |
| 2329 | |
| 2330 | /* Motorola e500. */ |
| 2331 | static const struct reg registers_e500[] = |
| 2332 | { |
| 2333 | R(pc), R(ps), |
| 2334 | /* cr, lr, ctr, xer, "" */ |
| 2335 | PPC_UISA_NOFP_SPRS, |
| 2336 | /* 7...38 */ |
| 2337 | PPC_EV_REGS, |
| 2338 | R8(acc), R(spefscr), |
| 2339 | /* NOTE: Add new registers here the end of the raw register |
| 2340 | list and just before the first pseudo register. */ |
| 2341 | /* 41...72 */ |
| 2342 | PPC_GPRS_PSEUDO_REGS |
| 2343 | }; |
| 2344 | |
| 2345 | /* Information about a particular processor variant. */ |
| 2346 | |
| 2347 | struct variant |
| 2348 | { |
| 2349 | /* Name of this variant. */ |
| 2350 | char *name; |
| 2351 | |
| 2352 | /* English description of the variant. */ |
| 2353 | char *description; |
| 2354 | |
| 2355 | /* bfd_arch_info.arch corresponding to variant. */ |
| 2356 | enum bfd_architecture arch; |
| 2357 | |
| 2358 | /* bfd_arch_info.mach corresponding to variant. */ |
| 2359 | unsigned long mach; |
| 2360 | |
| 2361 | /* Number of real registers. */ |
| 2362 | int nregs; |
| 2363 | |
| 2364 | /* Number of pseudo registers. */ |
| 2365 | int npregs; |
| 2366 | |
| 2367 | /* Number of total registers (the sum of nregs and npregs). */ |
| 2368 | int num_tot_regs; |
| 2369 | |
| 2370 | /* Table of register names; registers[R] is the name of the register |
| 2371 | number R. */ |
| 2372 | const struct reg *regs; |
| 2373 | }; |
| 2374 | |
| 2375 | #define tot_num_registers(list) (sizeof (list) / sizeof((list)[0])) |
| 2376 | |
| 2377 | static int |
| 2378 | num_registers (const struct reg *reg_list, int num_tot_regs) |
| 2379 | { |
| 2380 | int i; |
| 2381 | int nregs = 0; |
| 2382 | |
| 2383 | for (i = 0; i < num_tot_regs; i++) |
| 2384 | if (!reg_list[i].pseudo) |
| 2385 | nregs++; |
| 2386 | |
| 2387 | return nregs; |
| 2388 | } |
| 2389 | |
| 2390 | static int |
| 2391 | num_pseudo_registers (const struct reg *reg_list, int num_tot_regs) |
| 2392 | { |
| 2393 | int i; |
| 2394 | int npregs = 0; |
| 2395 | |
| 2396 | for (i = 0; i < num_tot_regs; i++) |
| 2397 | if (reg_list[i].pseudo) |
| 2398 | npregs ++; |
| 2399 | |
| 2400 | return npregs; |
| 2401 | } |
| 2402 | |
| 2403 | /* Information in this table comes from the following web sites: |
| 2404 | IBM: http://www.chips.ibm.com:80/products/embedded/ |
| 2405 | Motorola: http://www.mot.com/SPS/PowerPC/ |
| 2406 | |
| 2407 | I'm sure I've got some of the variant descriptions not quite right. |
| 2408 | Please report any inaccuracies you find to GDB's maintainer. |
| 2409 | |
| 2410 | If you add entries to this table, please be sure to allow the new |
| 2411 | value as an argument to the --with-cpu flag, in configure.in. */ |
| 2412 | |
| 2413 | static struct variant variants[] = |
| 2414 | { |
| 2415 | |
| 2416 | {"powerpc", "PowerPC user-level", bfd_arch_powerpc, |
| 2417 | bfd_mach_ppc, -1, -1, tot_num_registers (registers_powerpc), |
| 2418 | registers_powerpc}, |
| 2419 | {"power", "POWER user-level", bfd_arch_rs6000, |
| 2420 | bfd_mach_rs6k, -1, -1, tot_num_registers (registers_power), |
| 2421 | registers_power}, |
| 2422 | {"403", "IBM PowerPC 403", bfd_arch_powerpc, |
| 2423 | bfd_mach_ppc_403, -1, -1, tot_num_registers (registers_403), |
| 2424 | registers_403}, |
| 2425 | {"601", "Motorola PowerPC 601", bfd_arch_powerpc, |
| 2426 | bfd_mach_ppc_601, -1, -1, tot_num_registers (registers_601), |
| 2427 | registers_601}, |
| 2428 | {"602", "Motorola PowerPC 602", bfd_arch_powerpc, |
| 2429 | bfd_mach_ppc_602, -1, -1, tot_num_registers (registers_602), |
| 2430 | registers_602}, |
| 2431 | {"603", "Motorola/IBM PowerPC 603 or 603e", bfd_arch_powerpc, |
| 2432 | bfd_mach_ppc_603, -1, -1, tot_num_registers (registers_603), |
| 2433 | registers_603}, |
| 2434 | {"604", "Motorola PowerPC 604 or 604e", bfd_arch_powerpc, |
| 2435 | 604, -1, -1, tot_num_registers (registers_604), |
| 2436 | registers_604}, |
| 2437 | {"403GC", "IBM PowerPC 403GC", bfd_arch_powerpc, |
| 2438 | bfd_mach_ppc_403gc, -1, -1, tot_num_registers (registers_403GC), |
| 2439 | registers_403GC}, |
| 2440 | {"505", "Motorola PowerPC 505", bfd_arch_powerpc, |
| 2441 | bfd_mach_ppc_505, -1, -1, tot_num_registers (registers_505), |
| 2442 | registers_505}, |
| 2443 | {"860", "Motorola PowerPC 860 or 850", bfd_arch_powerpc, |
| 2444 | bfd_mach_ppc_860, -1, -1, tot_num_registers (registers_860), |
| 2445 | registers_860}, |
| 2446 | {"750", "Motorola/IBM PowerPC 750 or 740", bfd_arch_powerpc, |
| 2447 | bfd_mach_ppc_750, -1, -1, tot_num_registers (registers_750), |
| 2448 | registers_750}, |
| 2449 | {"7400", "Motorola/IBM PowerPC 7400 (G4)", bfd_arch_powerpc, |
| 2450 | bfd_mach_ppc_7400, -1, -1, tot_num_registers (registers_7400), |
| 2451 | registers_7400}, |
| 2452 | {"e500", "Motorola PowerPC e500", bfd_arch_powerpc, |
| 2453 | bfd_mach_ppc_e500, -1, -1, tot_num_registers (registers_e500), |
| 2454 | registers_e500}, |
| 2455 | |
| 2456 | /* 64-bit */ |
| 2457 | {"powerpc64", "PowerPC 64-bit user-level", bfd_arch_powerpc, |
| 2458 | bfd_mach_ppc64, -1, -1, tot_num_registers (registers_powerpc), |
| 2459 | registers_powerpc}, |
| 2460 | {"620", "Motorola PowerPC 620", bfd_arch_powerpc, |
| 2461 | bfd_mach_ppc_620, -1, -1, tot_num_registers (registers_powerpc), |
| 2462 | registers_powerpc}, |
| 2463 | {"630", "Motorola PowerPC 630", bfd_arch_powerpc, |
| 2464 | bfd_mach_ppc_630, -1, -1, tot_num_registers (registers_powerpc), |
| 2465 | registers_powerpc}, |
| 2466 | {"a35", "PowerPC A35", bfd_arch_powerpc, |
| 2467 | bfd_mach_ppc_a35, -1, -1, tot_num_registers (registers_powerpc), |
| 2468 | registers_powerpc}, |
| 2469 | {"rs64ii", "PowerPC rs64ii", bfd_arch_powerpc, |
| 2470 | bfd_mach_ppc_rs64ii, -1, -1, tot_num_registers (registers_powerpc), |
| 2471 | registers_powerpc}, |
| 2472 | {"rs64iii", "PowerPC rs64iii", bfd_arch_powerpc, |
| 2473 | bfd_mach_ppc_rs64iii, -1, -1, tot_num_registers (registers_powerpc), |
| 2474 | registers_powerpc}, |
| 2475 | |
| 2476 | /* FIXME: I haven't checked the register sets of the following. */ |
| 2477 | {"rs1", "IBM POWER RS1", bfd_arch_rs6000, |
| 2478 | bfd_mach_rs6k_rs1, -1, -1, tot_num_registers (registers_power), |
| 2479 | registers_power}, |
| 2480 | {"rsc", "IBM POWER RSC", bfd_arch_rs6000, |
| 2481 | bfd_mach_rs6k_rsc, -1, -1, tot_num_registers (registers_power), |
| 2482 | registers_power}, |
| 2483 | {"rs2", "IBM POWER RS2", bfd_arch_rs6000, |
| 2484 | bfd_mach_rs6k_rs2, -1, -1, tot_num_registers (registers_power), |
| 2485 | registers_power}, |
| 2486 | |
| 2487 | {0, 0, 0, 0, 0, 0, 0, 0} |
| 2488 | }; |
| 2489 | |
| 2490 | /* Initialize the number of registers and pseudo registers in each variant. */ |
| 2491 | |
| 2492 | static void |
| 2493 | init_variants (void) |
| 2494 | { |
| 2495 | struct variant *v; |
| 2496 | |
| 2497 | for (v = variants; v->name; v++) |
| 2498 | { |
| 2499 | if (v->nregs == -1) |
| 2500 | v->nregs = num_registers (v->regs, v->num_tot_regs); |
| 2501 | if (v->npregs == -1) |
| 2502 | v->npregs = num_pseudo_registers (v->regs, v->num_tot_regs); |
| 2503 | } |
| 2504 | } |
| 2505 | |
| 2506 | /* Return the variant corresponding to architecture ARCH and machine number |
| 2507 | MACH. If no such variant exists, return null. */ |
| 2508 | |
| 2509 | static const struct variant * |
| 2510 | find_variant_by_arch (enum bfd_architecture arch, unsigned long mach) |
| 2511 | { |
| 2512 | const struct variant *v; |
| 2513 | |
| 2514 | for (v = variants; v->name; v++) |
| 2515 | if (arch == v->arch && mach == v->mach) |
| 2516 | return v; |
| 2517 | |
| 2518 | return NULL; |
| 2519 | } |
| 2520 | |
| 2521 | static int |
| 2522 | gdb_print_insn_powerpc (bfd_vma memaddr, disassemble_info *info) |
| 2523 | { |
| 2524 | if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) |
| 2525 | return print_insn_big_powerpc (memaddr, info); |
| 2526 | else |
| 2527 | return print_insn_little_powerpc (memaddr, info); |
| 2528 | } |
| 2529 | \f |
| 2530 | static CORE_ADDR |
| 2531 | rs6000_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame) |
| 2532 | { |
| 2533 | return frame_unwind_register_unsigned (next_frame, PC_REGNUM); |
| 2534 | } |
| 2535 | |
| 2536 | static struct frame_id |
| 2537 | rs6000_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame) |
| 2538 | { |
| 2539 | return frame_id_build (frame_unwind_register_unsigned (next_frame, |
| 2540 | SP_REGNUM), |
| 2541 | frame_pc_unwind (next_frame)); |
| 2542 | } |
| 2543 | |
| 2544 | struct rs6000_frame_cache |
| 2545 | { |
| 2546 | CORE_ADDR base; |
| 2547 | CORE_ADDR initial_sp; |
| 2548 | struct trad_frame_saved_reg *saved_regs; |
| 2549 | }; |
| 2550 | |
| 2551 | static struct rs6000_frame_cache * |
| 2552 | rs6000_frame_cache (struct frame_info *next_frame, void **this_cache) |
| 2553 | { |
| 2554 | struct rs6000_frame_cache *cache; |
| 2555 | struct gdbarch *gdbarch = get_frame_arch (next_frame); |
| 2556 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 2557 | struct rs6000_framedata fdata; |
| 2558 | int wordsize = tdep->wordsize; |
| 2559 | |
| 2560 | if ((*this_cache) != NULL) |
| 2561 | return (*this_cache); |
| 2562 | cache = FRAME_OBSTACK_ZALLOC (struct rs6000_frame_cache); |
| 2563 | (*this_cache) = cache; |
| 2564 | cache->saved_regs = trad_frame_alloc_saved_regs (next_frame); |
| 2565 | |
| 2566 | skip_prologue (frame_func_unwind (next_frame), frame_pc_unwind (next_frame), |
| 2567 | &fdata); |
| 2568 | |
| 2569 | /* If there were any saved registers, figure out parent's stack |
| 2570 | pointer. */ |
| 2571 | /* The following is true only if the frame doesn't have a call to |
| 2572 | alloca(), FIXME. */ |
| 2573 | |
| 2574 | if (fdata.saved_fpr == 0 |
| 2575 | && fdata.saved_gpr == 0 |
| 2576 | && fdata.saved_vr == 0 |
| 2577 | && fdata.saved_ev == 0 |
| 2578 | && fdata.lr_offset == 0 |
| 2579 | && fdata.cr_offset == 0 |
| 2580 | && fdata.vr_offset == 0 |
| 2581 | && fdata.ev_offset == 0) |
| 2582 | cache->base = frame_unwind_register_unsigned (next_frame, SP_REGNUM); |
| 2583 | else |
| 2584 | { |
| 2585 | /* NOTE: cagney/2002-04-14: The ->frame points to the inner-most |
| 2586 | address of the current frame. Things might be easier if the |
| 2587 | ->frame pointed to the outer-most address of the frame. In |
| 2588 | the mean time, the address of the prev frame is used as the |
| 2589 | base address of this frame. */ |
| 2590 | cache->base = frame_unwind_register_unsigned (next_frame, SP_REGNUM); |
| 2591 | if (!fdata.frameless) |
| 2592 | /* Frameless really means stackless. */ |
| 2593 | cache->base = read_memory_addr (cache->base, wordsize); |
| 2594 | } |
| 2595 | trad_frame_set_value (cache->saved_regs, SP_REGNUM, cache->base); |
| 2596 | |
| 2597 | /* if != -1, fdata.saved_fpr is the smallest number of saved_fpr. |
| 2598 | All fpr's from saved_fpr to fp31 are saved. */ |
| 2599 | |
| 2600 | if (fdata.saved_fpr >= 0) |
| 2601 | { |
| 2602 | int i; |
| 2603 | CORE_ADDR fpr_addr = cache->base + fdata.fpr_offset; |
| 2604 | |
| 2605 | /* If skip_prologue says floating-point registers were saved, |
| 2606 | but the current architecture has no floating-point registers, |
| 2607 | then that's strange. But we have no indices to even record |
| 2608 | the addresses under, so we just ignore it. */ |
| 2609 | if (ppc_floating_point_unit_p (gdbarch)) |
| 2610 | for (i = fdata.saved_fpr; i < ppc_num_fprs; i++) |
| 2611 | { |
| 2612 | cache->saved_regs[tdep->ppc_fp0_regnum + i].addr = fpr_addr; |
| 2613 | fpr_addr += 8; |
| 2614 | } |
| 2615 | } |
| 2616 | |
| 2617 | /* if != -1, fdata.saved_gpr is the smallest number of saved_gpr. |
| 2618 | All gpr's from saved_gpr to gpr31 are saved. */ |
| 2619 | |
| 2620 | if (fdata.saved_gpr >= 0) |
| 2621 | { |
| 2622 | int i; |
| 2623 | CORE_ADDR gpr_addr = cache->base + fdata.gpr_offset; |
| 2624 | for (i = fdata.saved_gpr; i < ppc_num_gprs; i++) |
| 2625 | { |
| 2626 | cache->saved_regs[tdep->ppc_gp0_regnum + i].addr = gpr_addr; |
| 2627 | gpr_addr += wordsize; |
| 2628 | } |
| 2629 | } |
| 2630 | |
| 2631 | /* if != -1, fdata.saved_vr is the smallest number of saved_vr. |
| 2632 | All vr's from saved_vr to vr31 are saved. */ |
| 2633 | if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1) |
| 2634 | { |
| 2635 | if (fdata.saved_vr >= 0) |
| 2636 | { |
| 2637 | int i; |
| 2638 | CORE_ADDR vr_addr = cache->base + fdata.vr_offset; |
| 2639 | for (i = fdata.saved_vr; i < 32; i++) |
| 2640 | { |
| 2641 | cache->saved_regs[tdep->ppc_vr0_regnum + i].addr = vr_addr; |
| 2642 | vr_addr += register_size (gdbarch, tdep->ppc_vr0_regnum); |
| 2643 | } |
| 2644 | } |
| 2645 | } |
| 2646 | |
| 2647 | /* if != -1, fdata.saved_ev is the smallest number of saved_ev. |
| 2648 | All vr's from saved_ev to ev31 are saved. ????? */ |
| 2649 | if (tdep->ppc_ev0_regnum != -1 && tdep->ppc_ev31_regnum != -1) |
| 2650 | { |
| 2651 | if (fdata.saved_ev >= 0) |
| 2652 | { |
| 2653 | int i; |
| 2654 | CORE_ADDR ev_addr = cache->base + fdata.ev_offset; |
| 2655 | for (i = fdata.saved_ev; i < ppc_num_gprs; i++) |
| 2656 | { |
| 2657 | cache->saved_regs[tdep->ppc_ev0_regnum + i].addr = ev_addr; |
| 2658 | cache->saved_regs[tdep->ppc_gp0_regnum + i].addr = ev_addr + 4; |
| 2659 | ev_addr += register_size (gdbarch, tdep->ppc_ev0_regnum); |
| 2660 | } |
| 2661 | } |
| 2662 | } |
| 2663 | |
| 2664 | /* If != 0, fdata.cr_offset is the offset from the frame that |
| 2665 | holds the CR. */ |
| 2666 | if (fdata.cr_offset != 0) |
| 2667 | cache->saved_regs[tdep->ppc_cr_regnum].addr = cache->base + fdata.cr_offset; |
| 2668 | |
| 2669 | /* If != 0, fdata.lr_offset is the offset from the frame that |
| 2670 | holds the LR. */ |
| 2671 | if (fdata.lr_offset != 0) |
| 2672 | cache->saved_regs[tdep->ppc_lr_regnum].addr = cache->base + fdata.lr_offset; |
| 2673 | /* The PC is found in the link register. */ |
| 2674 | cache->saved_regs[PC_REGNUM] = cache->saved_regs[tdep->ppc_lr_regnum]; |
| 2675 | |
| 2676 | /* If != 0, fdata.vrsave_offset is the offset from the frame that |
| 2677 | holds the VRSAVE. */ |
| 2678 | if (fdata.vrsave_offset != 0) |
| 2679 | cache->saved_regs[tdep->ppc_vrsave_regnum].addr = cache->base + fdata.vrsave_offset; |
| 2680 | |
| 2681 | if (fdata.alloca_reg < 0) |
| 2682 | /* If no alloca register used, then fi->frame is the value of the |
| 2683 | %sp for this frame, and it is good enough. */ |
| 2684 | cache->initial_sp = frame_unwind_register_unsigned (next_frame, SP_REGNUM); |
| 2685 | else |
| 2686 | cache->initial_sp = frame_unwind_register_unsigned (next_frame, |
| 2687 | fdata.alloca_reg); |
| 2688 | |
| 2689 | return cache; |
| 2690 | } |
| 2691 | |
| 2692 | static void |
| 2693 | rs6000_frame_this_id (struct frame_info *next_frame, void **this_cache, |
| 2694 | struct frame_id *this_id) |
| 2695 | { |
| 2696 | struct rs6000_frame_cache *info = rs6000_frame_cache (next_frame, |
| 2697 | this_cache); |
| 2698 | (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame)); |
| 2699 | } |
| 2700 | |
| 2701 | static void |
| 2702 | rs6000_frame_prev_register (struct frame_info *next_frame, |
| 2703 | void **this_cache, |
| 2704 | int regnum, int *optimizedp, |
| 2705 | enum lval_type *lvalp, CORE_ADDR *addrp, |
| 2706 | int *realnump, void *valuep) |
| 2707 | { |
| 2708 | struct rs6000_frame_cache *info = rs6000_frame_cache (next_frame, |
| 2709 | this_cache); |
| 2710 | trad_frame_prev_register (next_frame, info->saved_regs, regnum, |
| 2711 | optimizedp, lvalp, addrp, realnump, valuep); |
| 2712 | } |
| 2713 | |
| 2714 | static const struct frame_unwind rs6000_frame_unwind = |
| 2715 | { |
| 2716 | NORMAL_FRAME, |
| 2717 | rs6000_frame_this_id, |
| 2718 | rs6000_frame_prev_register |
| 2719 | }; |
| 2720 | |
| 2721 | static const struct frame_unwind * |
| 2722 | rs6000_frame_sniffer (struct frame_info *next_frame) |
| 2723 | { |
| 2724 | return &rs6000_frame_unwind; |
| 2725 | } |
| 2726 | |
| 2727 | \f |
| 2728 | |
| 2729 | static CORE_ADDR |
| 2730 | rs6000_frame_base_address (struct frame_info *next_frame, |
| 2731 | void **this_cache) |
| 2732 | { |
| 2733 | struct rs6000_frame_cache *info = rs6000_frame_cache (next_frame, |
| 2734 | this_cache); |
| 2735 | return info->initial_sp; |
| 2736 | } |
| 2737 | |
| 2738 | static const struct frame_base rs6000_frame_base = { |
| 2739 | &rs6000_frame_unwind, |
| 2740 | rs6000_frame_base_address, |
| 2741 | rs6000_frame_base_address, |
| 2742 | rs6000_frame_base_address |
| 2743 | }; |
| 2744 | |
| 2745 | static const struct frame_base * |
| 2746 | rs6000_frame_base_sniffer (struct frame_info *next_frame) |
| 2747 | { |
| 2748 | return &rs6000_frame_base; |
| 2749 | } |
| 2750 | |
| 2751 | /* Initialize the current architecture based on INFO. If possible, re-use an |
| 2752 | architecture from ARCHES, which is a list of architectures already created |
| 2753 | during this debugging session. |
| 2754 | |
| 2755 | Called e.g. at program startup, when reading a core file, and when reading |
| 2756 | a binary file. */ |
| 2757 | |
| 2758 | static struct gdbarch * |
| 2759 | rs6000_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) |
| 2760 | { |
| 2761 | struct gdbarch *gdbarch; |
| 2762 | struct gdbarch_tdep *tdep; |
| 2763 | int wordsize, from_xcoff_exec, from_elf_exec, power, i, off; |
| 2764 | struct reg *regs; |
| 2765 | const struct variant *v; |
| 2766 | enum bfd_architecture arch; |
| 2767 | unsigned long mach; |
| 2768 | bfd abfd; |
| 2769 | int sysv_abi; |
| 2770 | asection *sect; |
| 2771 | |
| 2772 | from_xcoff_exec = info.abfd && info.abfd->format == bfd_object && |
| 2773 | bfd_get_flavour (info.abfd) == bfd_target_xcoff_flavour; |
| 2774 | |
| 2775 | from_elf_exec = info.abfd && info.abfd->format == bfd_object && |
| 2776 | bfd_get_flavour (info.abfd) == bfd_target_elf_flavour; |
| 2777 | |
| 2778 | sysv_abi = info.abfd && bfd_get_flavour (info.abfd) == bfd_target_elf_flavour; |
| 2779 | |
| 2780 | /* Check word size. If INFO is from a binary file, infer it from |
| 2781 | that, else choose a likely default. */ |
| 2782 | if (from_xcoff_exec) |
| 2783 | { |
| 2784 | if (bfd_xcoff_is_xcoff64 (info.abfd)) |
| 2785 | wordsize = 8; |
| 2786 | else |
| 2787 | wordsize = 4; |
| 2788 | } |
| 2789 | else if (from_elf_exec) |
| 2790 | { |
| 2791 | if (elf_elfheader (info.abfd)->e_ident[EI_CLASS] == ELFCLASS64) |
| 2792 | wordsize = 8; |
| 2793 | else |
| 2794 | wordsize = 4; |
| 2795 | } |
| 2796 | else |
| 2797 | { |
| 2798 | if (info.bfd_arch_info != NULL && info.bfd_arch_info->bits_per_word != 0) |
| 2799 | wordsize = info.bfd_arch_info->bits_per_word / |
| 2800 | info.bfd_arch_info->bits_per_byte; |
| 2801 | else |
| 2802 | wordsize = 4; |
| 2803 | } |
| 2804 | |
| 2805 | /* Find a candidate among extant architectures. */ |
| 2806 | for (arches = gdbarch_list_lookup_by_info (arches, &info); |
| 2807 | arches != NULL; |
| 2808 | arches = gdbarch_list_lookup_by_info (arches->next, &info)) |
| 2809 | { |
| 2810 | /* Word size in the various PowerPC bfd_arch_info structs isn't |
| 2811 | meaningful, because 64-bit CPUs can run in 32-bit mode. So, perform |
| 2812 | separate word size check. */ |
| 2813 | tdep = gdbarch_tdep (arches->gdbarch); |
| 2814 | if (tdep && tdep->wordsize == wordsize) |
| 2815 | return arches->gdbarch; |
| 2816 | } |
| 2817 | |
| 2818 | /* None found, create a new architecture from INFO, whose bfd_arch_info |
| 2819 | validity depends on the source: |
| 2820 | - executable useless |
| 2821 | - rs6000_host_arch() good |
| 2822 | - core file good |
| 2823 | - "set arch" trust blindly |
| 2824 | - GDB startup useless but harmless */ |
| 2825 | |
| 2826 | if (!from_xcoff_exec) |
| 2827 | { |
| 2828 | arch = info.bfd_arch_info->arch; |
| 2829 | mach = info.bfd_arch_info->mach; |
| 2830 | } |
| 2831 | else |
| 2832 | { |
| 2833 | arch = bfd_arch_powerpc; |
| 2834 | bfd_default_set_arch_mach (&abfd, arch, 0); |
| 2835 | info.bfd_arch_info = bfd_get_arch_info (&abfd); |
| 2836 | mach = info.bfd_arch_info->mach; |
| 2837 | } |
| 2838 | tdep = xmalloc (sizeof (struct gdbarch_tdep)); |
| 2839 | tdep->wordsize = wordsize; |
| 2840 | |
| 2841 | /* For e500 executables, the apuinfo section is of help here. Such |
| 2842 | section contains the identifier and revision number of each |
| 2843 | Application-specific Processing Unit that is present on the |
| 2844 | chip. The content of the section is determined by the assembler |
| 2845 | which looks at each instruction and determines which unit (and |
| 2846 | which version of it) can execute it. In our case we just look for |
| 2847 | the existance of the section. */ |
| 2848 | |
| 2849 | if (info.abfd) |
| 2850 | { |
| 2851 | sect = bfd_get_section_by_name (info.abfd, ".PPC.EMB.apuinfo"); |
| 2852 | if (sect) |
| 2853 | { |
| 2854 | arch = info.bfd_arch_info->arch; |
| 2855 | mach = bfd_mach_ppc_e500; |
| 2856 | bfd_default_set_arch_mach (&abfd, arch, mach); |
| 2857 | info.bfd_arch_info = bfd_get_arch_info (&abfd); |
| 2858 | } |
| 2859 | } |
| 2860 | |
| 2861 | gdbarch = gdbarch_alloc (&info, tdep); |
| 2862 | power = arch == bfd_arch_rs6000; |
| 2863 | |
| 2864 | /* Initialize the number of real and pseudo registers in each variant. */ |
| 2865 | init_variants (); |
| 2866 | |
| 2867 | /* Choose variant. */ |
| 2868 | v = find_variant_by_arch (arch, mach); |
| 2869 | if (!v) |
| 2870 | return NULL; |
| 2871 | |
| 2872 | tdep->regs = v->regs; |
| 2873 | |
| 2874 | tdep->ppc_gp0_regnum = 0; |
| 2875 | tdep->ppc_gprs_pseudo_p = 0; |
| 2876 | tdep->ppc_toc_regnum = 2; |
| 2877 | tdep->ppc_ps_regnum = 65; |
| 2878 | tdep->ppc_cr_regnum = 66; |
| 2879 | tdep->ppc_lr_regnum = 67; |
| 2880 | tdep->ppc_ctr_regnum = 68; |
| 2881 | tdep->ppc_xer_regnum = 69; |
| 2882 | if (v->mach == bfd_mach_ppc_601) |
| 2883 | tdep->ppc_mq_regnum = 124; |
| 2884 | else if (power) |
| 2885 | tdep->ppc_mq_regnum = 70; |
| 2886 | else |
| 2887 | tdep->ppc_mq_regnum = -1; |
| 2888 | tdep->ppc_fp0_regnum = 32; |
| 2889 | tdep->ppc_fpscr_regnum = power ? 71 : 70; |
| 2890 | tdep->ppc_vr0_regnum = -1; |
| 2891 | tdep->ppc_vrsave_regnum = -1; |
| 2892 | tdep->ppc_ev0_regnum = -1; |
| 2893 | tdep->ppc_ev31_regnum = -1; |
| 2894 | tdep->ppc_acc_regnum = -1; |
| 2895 | tdep->ppc_spefscr_regnum = -1; |
| 2896 | |
| 2897 | set_gdbarch_pc_regnum (gdbarch, 64); |
| 2898 | set_gdbarch_sp_regnum (gdbarch, 1); |
| 2899 | set_gdbarch_deprecated_fp_regnum (gdbarch, 1); |
| 2900 | if (sysv_abi && wordsize == 8) |
| 2901 | set_gdbarch_return_value (gdbarch, ppc64_sysv_abi_return_value); |
| 2902 | else if (sysv_abi && wordsize == 4) |
| 2903 | set_gdbarch_return_value (gdbarch, ppc_sysv_abi_return_value); |
| 2904 | else |
| 2905 | { |
| 2906 | set_gdbarch_deprecated_extract_return_value (gdbarch, rs6000_extract_return_value); |
| 2907 | set_gdbarch_store_return_value (gdbarch, rs6000_store_return_value); |
| 2908 | } |
| 2909 | |
| 2910 | /* Set lr_frame_offset. */ |
| 2911 | if (wordsize == 8) |
| 2912 | tdep->lr_frame_offset = 16; |
| 2913 | else if (sysv_abi) |
| 2914 | tdep->lr_frame_offset = 4; |
| 2915 | else |
| 2916 | tdep->lr_frame_offset = 8; |
| 2917 | |
| 2918 | if (v->arch == bfd_arch_powerpc) |
| 2919 | switch (v->mach) |
| 2920 | { |
| 2921 | case bfd_mach_ppc: |
| 2922 | tdep->ppc_vr0_regnum = 71; |
| 2923 | tdep->ppc_vrsave_regnum = 104; |
| 2924 | break; |
| 2925 | case bfd_mach_ppc_7400: |
| 2926 | tdep->ppc_vr0_regnum = 119; |
| 2927 | tdep->ppc_vrsave_regnum = 152; |
| 2928 | break; |
| 2929 | case bfd_mach_ppc_e500: |
| 2930 | tdep->ppc_gp0_regnum = 41; |
| 2931 | tdep->ppc_gprs_pseudo_p = 1; |
| 2932 | tdep->ppc_toc_regnum = -1; |
| 2933 | tdep->ppc_ps_regnum = 1; |
| 2934 | tdep->ppc_cr_regnum = 2; |
| 2935 | tdep->ppc_lr_regnum = 3; |
| 2936 | tdep->ppc_ctr_regnum = 4; |
| 2937 | tdep->ppc_xer_regnum = 5; |
| 2938 | tdep->ppc_ev0_regnum = 7; |
| 2939 | tdep->ppc_ev31_regnum = 38; |
| 2940 | tdep->ppc_fp0_regnum = -1; |
| 2941 | tdep->ppc_fpscr_regnum = -1; |
| 2942 | tdep->ppc_acc_regnum = 39; |
| 2943 | tdep->ppc_spefscr_regnum = 40; |
| 2944 | set_gdbarch_pc_regnum (gdbarch, 0); |
| 2945 | set_gdbarch_sp_regnum (gdbarch, tdep->ppc_gp0_regnum + 1); |
| 2946 | set_gdbarch_deprecated_fp_regnum (gdbarch, tdep->ppc_gp0_regnum + 1); |
| 2947 | set_gdbarch_pseudo_register_read (gdbarch, e500_pseudo_register_read); |
| 2948 | set_gdbarch_pseudo_register_write (gdbarch, e500_pseudo_register_write); |
| 2949 | break; |
| 2950 | } |
| 2951 | |
| 2952 | /* Sanity check on registers. */ |
| 2953 | gdb_assert (strcmp (tdep->regs[tdep->ppc_gp0_regnum].name, "r0") == 0); |
| 2954 | |
| 2955 | /* Select instruction printer. */ |
| 2956 | if (arch == power) |
| 2957 | set_gdbarch_print_insn (gdbarch, print_insn_rs6000); |
| 2958 | else |
| 2959 | set_gdbarch_print_insn (gdbarch, gdb_print_insn_powerpc); |
| 2960 | |
| 2961 | set_gdbarch_write_pc (gdbarch, generic_target_write_pc); |
| 2962 | |
| 2963 | set_gdbarch_num_regs (gdbarch, v->nregs); |
| 2964 | set_gdbarch_num_pseudo_regs (gdbarch, v->npregs); |
| 2965 | set_gdbarch_register_name (gdbarch, rs6000_register_name); |
| 2966 | set_gdbarch_register_type (gdbarch, rs6000_register_type); |
| 2967 | |
| 2968 | set_gdbarch_ptr_bit (gdbarch, wordsize * TARGET_CHAR_BIT); |
| 2969 | set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT); |
| 2970 | set_gdbarch_int_bit (gdbarch, 4 * TARGET_CHAR_BIT); |
| 2971 | set_gdbarch_long_bit (gdbarch, wordsize * TARGET_CHAR_BIT); |
| 2972 | set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT); |
| 2973 | set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT); |
| 2974 | set_gdbarch_double_bit (gdbarch, 8 * TARGET_CHAR_BIT); |
| 2975 | if (sysv_abi) |
| 2976 | set_gdbarch_long_double_bit (gdbarch, 16 * TARGET_CHAR_BIT); |
| 2977 | else |
| 2978 | set_gdbarch_long_double_bit (gdbarch, 8 * TARGET_CHAR_BIT); |
| 2979 | set_gdbarch_char_signed (gdbarch, 0); |
| 2980 | |
| 2981 | set_gdbarch_frame_align (gdbarch, rs6000_frame_align); |
| 2982 | if (sysv_abi && wordsize == 8) |
| 2983 | /* PPC64 SYSV. */ |
| 2984 | set_gdbarch_frame_red_zone_size (gdbarch, 288); |
| 2985 | else if (!sysv_abi && wordsize == 4) |
| 2986 | /* PowerOpen / AIX 32 bit. The saved area or red zone consists of |
| 2987 | 19 4 byte GPRS + 18 8 byte FPRs giving a total of 220 bytes. |
| 2988 | Problem is, 220 isn't frame (16 byte) aligned. Round it up to |
| 2989 | 224. */ |
| 2990 | set_gdbarch_frame_red_zone_size (gdbarch, 224); |
| 2991 | |
| 2992 | set_gdbarch_convert_register_p (gdbarch, rs6000_convert_register_p); |
| 2993 | set_gdbarch_register_to_value (gdbarch, rs6000_register_to_value); |
| 2994 | set_gdbarch_value_to_register (gdbarch, rs6000_value_to_register); |
| 2995 | |
| 2996 | set_gdbarch_stab_reg_to_regnum (gdbarch, rs6000_stab_reg_to_regnum); |
| 2997 | set_gdbarch_dwarf2_reg_to_regnum (gdbarch, rs6000_dwarf2_reg_to_regnum); |
| 2998 | /* Note: kevinb/2002-04-12: I'm not convinced that rs6000_push_arguments() |
| 2999 | is correct for the SysV ABI when the wordsize is 8, but I'm also |
| 3000 | fairly certain that ppc_sysv_abi_push_arguments() will give even |
| 3001 | worse results since it only works for 32-bit code. So, for the moment, |
| 3002 | we're better off calling rs6000_push_arguments() since it works for |
| 3003 | 64-bit code. At some point in the future, this matter needs to be |
| 3004 | revisited. */ |
| 3005 | if (sysv_abi && wordsize == 4) |
| 3006 | set_gdbarch_push_dummy_call (gdbarch, ppc_sysv_abi_push_dummy_call); |
| 3007 | else if (sysv_abi && wordsize == 8) |
| 3008 | set_gdbarch_push_dummy_call (gdbarch, ppc64_sysv_abi_push_dummy_call); |
| 3009 | else |
| 3010 | set_gdbarch_push_dummy_call (gdbarch, rs6000_push_dummy_call); |
| 3011 | |
| 3012 | set_gdbarch_deprecated_extract_struct_value_address (gdbarch, rs6000_extract_struct_value_address); |
| 3013 | |
| 3014 | set_gdbarch_skip_prologue (gdbarch, rs6000_skip_prologue); |
| 3015 | set_gdbarch_inner_than (gdbarch, core_addr_lessthan); |
| 3016 | set_gdbarch_breakpoint_from_pc (gdbarch, rs6000_breakpoint_from_pc); |
| 3017 | |
| 3018 | /* Handle the 64-bit SVR4 minimal-symbol convention of using "FN" |
| 3019 | for the descriptor and ".FN" for the entry-point -- a user |
| 3020 | specifying "break FN" will unexpectedly end up with a breakpoint |
| 3021 | on the descriptor and not the function. This architecture method |
| 3022 | transforms any breakpoints on descriptors into breakpoints on the |
| 3023 | corresponding entry point. */ |
| 3024 | if (sysv_abi && wordsize == 8) |
| 3025 | set_gdbarch_adjust_breakpoint_address (gdbarch, ppc64_sysv_abi_adjust_breakpoint_address); |
| 3026 | |
| 3027 | /* Not sure on this. FIXMEmgo */ |
| 3028 | set_gdbarch_frame_args_skip (gdbarch, 8); |
| 3029 | |
| 3030 | if (!sysv_abi) |
| 3031 | set_gdbarch_deprecated_use_struct_convention (gdbarch, rs6000_use_struct_convention); |
| 3032 | |
| 3033 | if (!sysv_abi) |
| 3034 | { |
| 3035 | /* Handle RS/6000 function pointers (which are really function |
| 3036 | descriptors). */ |
| 3037 | set_gdbarch_convert_from_func_ptr_addr (gdbarch, |
| 3038 | rs6000_convert_from_func_ptr_addr); |
| 3039 | } |
| 3040 | |
| 3041 | /* Helpers for function argument information. */ |
| 3042 | set_gdbarch_fetch_pointer_argument (gdbarch, rs6000_fetch_pointer_argument); |
| 3043 | |
| 3044 | /* Hook in ABI-specific overrides, if they have been registered. */ |
| 3045 | gdbarch_init_osabi (info, gdbarch); |
| 3046 | |
| 3047 | switch (info.osabi) |
| 3048 | { |
| 3049 | case GDB_OSABI_NETBSD_AOUT: |
| 3050 | case GDB_OSABI_NETBSD_ELF: |
| 3051 | case GDB_OSABI_UNKNOWN: |
| 3052 | case GDB_OSABI_LINUX: |
| 3053 | set_gdbarch_unwind_pc (gdbarch, rs6000_unwind_pc); |
| 3054 | frame_unwind_append_sniffer (gdbarch, rs6000_frame_sniffer); |
| 3055 | set_gdbarch_unwind_dummy_id (gdbarch, rs6000_unwind_dummy_id); |
| 3056 | frame_base_append_sniffer (gdbarch, rs6000_frame_base_sniffer); |
| 3057 | break; |
| 3058 | default: |
| 3059 | set_gdbarch_believe_pcc_promotion (gdbarch, 1); |
| 3060 | |
| 3061 | set_gdbarch_unwind_pc (gdbarch, rs6000_unwind_pc); |
| 3062 | frame_unwind_append_sniffer (gdbarch, rs6000_frame_sniffer); |
| 3063 | set_gdbarch_unwind_dummy_id (gdbarch, rs6000_unwind_dummy_id); |
| 3064 | frame_base_append_sniffer (gdbarch, rs6000_frame_base_sniffer); |
| 3065 | } |
| 3066 | |
| 3067 | if (from_xcoff_exec) |
| 3068 | { |
| 3069 | /* NOTE: jimix/2003-06-09: This test should really check for |
| 3070 | GDB_OSABI_AIX when that is defined and becomes |
| 3071 | available. (Actually, once things are properly split apart, |
| 3072 | the test goes away.) */ |
| 3073 | /* RS6000/AIX does not support PT_STEP. Has to be simulated. */ |
| 3074 | set_gdbarch_software_single_step (gdbarch, rs6000_software_single_step); |
| 3075 | } |
| 3076 | |
| 3077 | return gdbarch; |
| 3078 | } |
| 3079 | |
| 3080 | static void |
| 3081 | rs6000_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file) |
| 3082 | { |
| 3083 | struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); |
| 3084 | |
| 3085 | if (tdep == NULL) |
| 3086 | return; |
| 3087 | |
| 3088 | /* FIXME: Dump gdbarch_tdep. */ |
| 3089 | } |
| 3090 | |
| 3091 | static struct cmd_list_element *info_powerpc_cmdlist = NULL; |
| 3092 | |
| 3093 | static void |
| 3094 | rs6000_info_powerpc_command (char *args, int from_tty) |
| 3095 | { |
| 3096 | help_list (info_powerpc_cmdlist, "info powerpc ", class_info, gdb_stdout); |
| 3097 | } |
| 3098 | |
| 3099 | /* Initialization code. */ |
| 3100 | |
| 3101 | extern initialize_file_ftype _initialize_rs6000_tdep; /* -Wmissing-prototypes */ |
| 3102 | |
| 3103 | void |
| 3104 | _initialize_rs6000_tdep (void) |
| 3105 | { |
| 3106 | gdbarch_register (bfd_arch_rs6000, rs6000_gdbarch_init, rs6000_dump_tdep); |
| 3107 | gdbarch_register (bfd_arch_powerpc, rs6000_gdbarch_init, rs6000_dump_tdep); |
| 3108 | |
| 3109 | /* Add root prefix command for "info powerpc" commands */ |
| 3110 | add_prefix_cmd ("powerpc", class_info, rs6000_info_powerpc_command, |
| 3111 | "Various POWERPC info specific commands.", |
| 3112 | &info_powerpc_cmdlist, "info powerpc ", 0, &infolist); |
| 3113 | } |