| 1 | /* Target-dependent code for GDB, the GNU debugger. |
| 2 | |
| 3 | Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 |
| 4 | Free Software Foundation, Inc. |
| 5 | |
| 6 | Contributed by D.J. Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) |
| 7 | for IBM Deutschland Entwicklung GmbH, IBM Corporation. |
| 8 | |
| 9 | This file is part of GDB. |
| 10 | |
| 11 | This program is free software; you can redistribute it and/or modify |
| 12 | it under the terms of the GNU General Public License as published by |
| 13 | the Free Software Foundation; either version 3 of the License, or |
| 14 | (at your option) any later version. |
| 15 | |
| 16 | This program is distributed in the hope that it will be useful, |
| 17 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 19 | GNU General Public License for more details. |
| 20 | |
| 21 | You should have received a copy of the GNU General Public License |
| 22 | along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| 23 | |
| 24 | #include "defs.h" |
| 25 | #include "arch-utils.h" |
| 26 | #include "frame.h" |
| 27 | #include "inferior.h" |
| 28 | #include "symtab.h" |
| 29 | #include "target.h" |
| 30 | #include "gdbcore.h" |
| 31 | #include "gdbcmd.h" |
| 32 | #include "objfiles.h" |
| 33 | #include "floatformat.h" |
| 34 | #include "regcache.h" |
| 35 | #include "trad-frame.h" |
| 36 | #include "frame-base.h" |
| 37 | #include "frame-unwind.h" |
| 38 | #include "dwarf2-frame.h" |
| 39 | #include "reggroups.h" |
| 40 | #include "regset.h" |
| 41 | #include "value.h" |
| 42 | #include "gdb_assert.h" |
| 43 | #include "dis-asm.h" |
| 44 | #include "solib-svr4.h" |
| 45 | #include "prologue-value.h" |
| 46 | |
| 47 | #include "s390-tdep.h" |
| 48 | |
| 49 | |
| 50 | /* The tdep structure. */ |
| 51 | |
| 52 | struct gdbarch_tdep |
| 53 | { |
| 54 | /* ABI version. */ |
| 55 | enum { ABI_LINUX_S390, ABI_LINUX_ZSERIES } abi; |
| 56 | |
| 57 | /* Core file register sets. */ |
| 58 | const struct regset *gregset; |
| 59 | int sizeof_gregset; |
| 60 | |
| 61 | const struct regset *fpregset; |
| 62 | int sizeof_fpregset; |
| 63 | }; |
| 64 | |
| 65 | |
| 66 | /* Return the name of register REGNUM. */ |
| 67 | static const char * |
| 68 | s390_register_name (struct gdbarch *gdbarch, int regnum) |
| 69 | { |
| 70 | static const char *register_names[S390_NUM_TOTAL_REGS] = |
| 71 | { |
| 72 | /* Program Status Word. */ |
| 73 | "pswm", "pswa", |
| 74 | /* General Purpose Registers. */ |
| 75 | "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", |
| 76 | "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", |
| 77 | /* Access Registers. */ |
| 78 | "acr0", "acr1", "acr2", "acr3", "acr4", "acr5", "acr6", "acr7", |
| 79 | "acr8", "acr9", "acr10", "acr11", "acr12", "acr13", "acr14", "acr15", |
| 80 | /* Floating Point Control Word. */ |
| 81 | "fpc", |
| 82 | /* Floating Point Registers. */ |
| 83 | "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", |
| 84 | "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", |
| 85 | /* Pseudo registers. */ |
| 86 | "pc", "cc", |
| 87 | }; |
| 88 | |
| 89 | gdb_assert (regnum >= 0 && regnum < S390_NUM_TOTAL_REGS); |
| 90 | return register_names[regnum]; |
| 91 | } |
| 92 | |
| 93 | /* Return the GDB type object for the "standard" data type of data in |
| 94 | register REGNUM. */ |
| 95 | static struct type * |
| 96 | s390_register_type (struct gdbarch *gdbarch, int regnum) |
| 97 | { |
| 98 | if (regnum == S390_PSWM_REGNUM || regnum == S390_PSWA_REGNUM) |
| 99 | return builtin_type (gdbarch)->builtin_long; |
| 100 | if (regnum >= S390_R0_REGNUM && regnum <= S390_R15_REGNUM) |
| 101 | return builtin_type (gdbarch)->builtin_long; |
| 102 | if (regnum >= S390_A0_REGNUM && regnum <= S390_A15_REGNUM) |
| 103 | return builtin_type (gdbarch)->builtin_int; |
| 104 | if (regnum == S390_FPC_REGNUM) |
| 105 | return builtin_type (gdbarch)->builtin_int; |
| 106 | if (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM) |
| 107 | return builtin_type (gdbarch)->builtin_double; |
| 108 | if (regnum == S390_PC_REGNUM) |
| 109 | return builtin_type (gdbarch)->builtin_func_ptr; |
| 110 | if (regnum == S390_CC_REGNUM) |
| 111 | return builtin_type (gdbarch)->builtin_int; |
| 112 | |
| 113 | internal_error (__FILE__, __LINE__, _("invalid regnum")); |
| 114 | } |
| 115 | |
| 116 | /* DWARF Register Mapping. */ |
| 117 | |
| 118 | static int s390_dwarf_regmap[] = |
| 119 | { |
| 120 | /* General Purpose Registers. */ |
| 121 | S390_R0_REGNUM, S390_R1_REGNUM, S390_R2_REGNUM, S390_R3_REGNUM, |
| 122 | S390_R4_REGNUM, S390_R5_REGNUM, S390_R6_REGNUM, S390_R7_REGNUM, |
| 123 | S390_R8_REGNUM, S390_R9_REGNUM, S390_R10_REGNUM, S390_R11_REGNUM, |
| 124 | S390_R12_REGNUM, S390_R13_REGNUM, S390_R14_REGNUM, S390_R15_REGNUM, |
| 125 | |
| 126 | /* Floating Point Registers. */ |
| 127 | S390_F0_REGNUM, S390_F2_REGNUM, S390_F4_REGNUM, S390_F6_REGNUM, |
| 128 | S390_F1_REGNUM, S390_F3_REGNUM, S390_F5_REGNUM, S390_F7_REGNUM, |
| 129 | S390_F8_REGNUM, S390_F10_REGNUM, S390_F12_REGNUM, S390_F14_REGNUM, |
| 130 | S390_F9_REGNUM, S390_F11_REGNUM, S390_F13_REGNUM, S390_F15_REGNUM, |
| 131 | |
| 132 | /* Control Registers (not mapped). */ |
| 133 | -1, -1, -1, -1, -1, -1, -1, -1, |
| 134 | -1, -1, -1, -1, -1, -1, -1, -1, |
| 135 | |
| 136 | /* Access Registers. */ |
| 137 | S390_A0_REGNUM, S390_A1_REGNUM, S390_A2_REGNUM, S390_A3_REGNUM, |
| 138 | S390_A4_REGNUM, S390_A5_REGNUM, S390_A6_REGNUM, S390_A7_REGNUM, |
| 139 | S390_A8_REGNUM, S390_A9_REGNUM, S390_A10_REGNUM, S390_A11_REGNUM, |
| 140 | S390_A12_REGNUM, S390_A13_REGNUM, S390_A14_REGNUM, S390_A15_REGNUM, |
| 141 | |
| 142 | /* Program Status Word. */ |
| 143 | S390_PSWM_REGNUM, |
| 144 | S390_PSWA_REGNUM |
| 145 | }; |
| 146 | |
| 147 | /* Convert DWARF register number REG to the appropriate register |
| 148 | number used by GDB. */ |
| 149 | static int |
| 150 | s390_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg) |
| 151 | { |
| 152 | int regnum = -1; |
| 153 | |
| 154 | if (reg >= 0 && reg < ARRAY_SIZE (s390_dwarf_regmap)) |
| 155 | regnum = s390_dwarf_regmap[reg]; |
| 156 | |
| 157 | if (regnum == -1) |
| 158 | warning (_("Unmapped DWARF Register #%d encountered."), reg); |
| 159 | |
| 160 | return regnum; |
| 161 | } |
| 162 | |
| 163 | /* Pseudo registers - PC and condition code. */ |
| 164 | |
| 165 | static void |
| 166 | s390_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache, |
| 167 | int regnum, gdb_byte *buf) |
| 168 | { |
| 169 | ULONGEST val; |
| 170 | |
| 171 | switch (regnum) |
| 172 | { |
| 173 | case S390_PC_REGNUM: |
| 174 | regcache_raw_read_unsigned (regcache, S390_PSWA_REGNUM, &val); |
| 175 | store_unsigned_integer (buf, 4, val & 0x7fffffff); |
| 176 | break; |
| 177 | |
| 178 | case S390_CC_REGNUM: |
| 179 | regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &val); |
| 180 | store_unsigned_integer (buf, 4, (val >> 12) & 3); |
| 181 | break; |
| 182 | |
| 183 | default: |
| 184 | internal_error (__FILE__, __LINE__, _("invalid regnum")); |
| 185 | } |
| 186 | } |
| 187 | |
| 188 | static void |
| 189 | s390_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache, |
| 190 | int regnum, const gdb_byte *buf) |
| 191 | { |
| 192 | ULONGEST val, psw; |
| 193 | |
| 194 | switch (regnum) |
| 195 | { |
| 196 | case S390_PC_REGNUM: |
| 197 | val = extract_unsigned_integer (buf, 4); |
| 198 | regcache_raw_read_unsigned (regcache, S390_PSWA_REGNUM, &psw); |
| 199 | psw = (psw & 0x80000000) | (val & 0x7fffffff); |
| 200 | regcache_raw_write_unsigned (regcache, S390_PSWA_REGNUM, psw); |
| 201 | break; |
| 202 | |
| 203 | case S390_CC_REGNUM: |
| 204 | val = extract_unsigned_integer (buf, 4); |
| 205 | regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &psw); |
| 206 | psw = (psw & ~((ULONGEST)3 << 12)) | ((val & 3) << 12); |
| 207 | regcache_raw_write_unsigned (regcache, S390_PSWM_REGNUM, psw); |
| 208 | break; |
| 209 | |
| 210 | default: |
| 211 | internal_error (__FILE__, __LINE__, _("invalid regnum")); |
| 212 | } |
| 213 | } |
| 214 | |
| 215 | static void |
| 216 | s390x_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache, |
| 217 | int regnum, gdb_byte *buf) |
| 218 | { |
| 219 | ULONGEST val; |
| 220 | |
| 221 | switch (regnum) |
| 222 | { |
| 223 | case S390_PC_REGNUM: |
| 224 | regcache_raw_read (regcache, S390_PSWA_REGNUM, buf); |
| 225 | break; |
| 226 | |
| 227 | case S390_CC_REGNUM: |
| 228 | regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &val); |
| 229 | store_unsigned_integer (buf, 4, (val >> 44) & 3); |
| 230 | break; |
| 231 | |
| 232 | default: |
| 233 | internal_error (__FILE__, __LINE__, _("invalid regnum")); |
| 234 | } |
| 235 | } |
| 236 | |
| 237 | static void |
| 238 | s390x_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache, |
| 239 | int regnum, const gdb_byte *buf) |
| 240 | { |
| 241 | ULONGEST val, psw; |
| 242 | |
| 243 | switch (regnum) |
| 244 | { |
| 245 | case S390_PC_REGNUM: |
| 246 | regcache_raw_write (regcache, S390_PSWA_REGNUM, buf); |
| 247 | break; |
| 248 | |
| 249 | case S390_CC_REGNUM: |
| 250 | val = extract_unsigned_integer (buf, 4); |
| 251 | regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &psw); |
| 252 | psw = (psw & ~((ULONGEST)3 << 44)) | ((val & 3) << 44); |
| 253 | regcache_raw_write_unsigned (regcache, S390_PSWM_REGNUM, psw); |
| 254 | break; |
| 255 | |
| 256 | default: |
| 257 | internal_error (__FILE__, __LINE__, _("invalid regnum")); |
| 258 | } |
| 259 | } |
| 260 | |
| 261 | /* 'float' values are stored in the upper half of floating-point |
| 262 | registers, even though we are otherwise a big-endian platform. */ |
| 263 | |
| 264 | static struct value * |
| 265 | s390_value_from_register (struct type *type, int regnum, |
| 266 | struct frame_info *frame) |
| 267 | { |
| 268 | struct value *value = default_value_from_register (type, regnum, frame); |
| 269 | int len = TYPE_LENGTH (type); |
| 270 | |
| 271 | if (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM && len < 8) |
| 272 | set_value_offset (value, 0); |
| 273 | |
| 274 | return value; |
| 275 | } |
| 276 | |
| 277 | /* Register groups. */ |
| 278 | |
| 279 | static int |
| 280 | s390_register_reggroup_p (struct gdbarch *gdbarch, int regnum, |
| 281 | struct reggroup *group) |
| 282 | { |
| 283 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 284 | |
| 285 | /* Registers displayed via 'info regs'. */ |
| 286 | if (group == general_reggroup) |
| 287 | return (regnum >= S390_R0_REGNUM && regnum <= S390_R15_REGNUM) |
| 288 | || regnum == S390_PC_REGNUM |
| 289 | || regnum == S390_CC_REGNUM; |
| 290 | |
| 291 | /* Registers displayed via 'info float'. */ |
| 292 | if (group == float_reggroup) |
| 293 | return (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM) |
| 294 | || regnum == S390_FPC_REGNUM; |
| 295 | |
| 296 | /* Registers that need to be saved/restored in order to |
| 297 | push or pop frames. */ |
| 298 | if (group == save_reggroup || group == restore_reggroup) |
| 299 | return regnum != S390_PSWM_REGNUM && regnum != S390_PSWA_REGNUM; |
| 300 | |
| 301 | return default_register_reggroup_p (gdbarch, regnum, group); |
| 302 | } |
| 303 | |
| 304 | |
| 305 | /* Core file register sets. */ |
| 306 | |
| 307 | int s390_regmap_gregset[S390_NUM_REGS] = |
| 308 | { |
| 309 | /* Program Status Word. */ |
| 310 | 0x00, 0x04, |
| 311 | /* General Purpose Registers. */ |
| 312 | 0x08, 0x0c, 0x10, 0x14, |
| 313 | 0x18, 0x1c, 0x20, 0x24, |
| 314 | 0x28, 0x2c, 0x30, 0x34, |
| 315 | 0x38, 0x3c, 0x40, 0x44, |
| 316 | /* Access Registers. */ |
| 317 | 0x48, 0x4c, 0x50, 0x54, |
| 318 | 0x58, 0x5c, 0x60, 0x64, |
| 319 | 0x68, 0x6c, 0x70, 0x74, |
| 320 | 0x78, 0x7c, 0x80, 0x84, |
| 321 | /* Floating Point Control Word. */ |
| 322 | -1, |
| 323 | /* Floating Point Registers. */ |
| 324 | -1, -1, -1, -1, -1, -1, -1, -1, |
| 325 | -1, -1, -1, -1, -1, -1, -1, -1, |
| 326 | }; |
| 327 | |
| 328 | int s390x_regmap_gregset[S390_NUM_REGS] = |
| 329 | { |
| 330 | 0x00, 0x08, |
| 331 | /* General Purpose Registers. */ |
| 332 | 0x10, 0x18, 0x20, 0x28, |
| 333 | 0x30, 0x38, 0x40, 0x48, |
| 334 | 0x50, 0x58, 0x60, 0x68, |
| 335 | 0x70, 0x78, 0x80, 0x88, |
| 336 | /* Access Registers. */ |
| 337 | 0x90, 0x94, 0x98, 0x9c, |
| 338 | 0xa0, 0xa4, 0xa8, 0xac, |
| 339 | 0xb0, 0xb4, 0xb8, 0xbc, |
| 340 | 0xc0, 0xc4, 0xc8, 0xcc, |
| 341 | /* Floating Point Control Word. */ |
| 342 | -1, |
| 343 | /* Floating Point Registers. */ |
| 344 | -1, -1, -1, -1, -1, -1, -1, -1, |
| 345 | -1, -1, -1, -1, -1, -1, -1, -1, |
| 346 | }; |
| 347 | |
| 348 | int s390_regmap_fpregset[S390_NUM_REGS] = |
| 349 | { |
| 350 | /* Program Status Word. */ |
| 351 | -1, -1, |
| 352 | /* General Purpose Registers. */ |
| 353 | -1, -1, -1, -1, -1, -1, -1, -1, |
| 354 | -1, -1, -1, -1, -1, -1, -1, -1, |
| 355 | /* Access Registers. */ |
| 356 | -1, -1, -1, -1, -1, -1, -1, -1, |
| 357 | -1, -1, -1, -1, -1, -1, -1, -1, |
| 358 | /* Floating Point Control Word. */ |
| 359 | 0x00, |
| 360 | /* Floating Point Registers. */ |
| 361 | 0x08, 0x10, 0x18, 0x20, |
| 362 | 0x28, 0x30, 0x38, 0x40, |
| 363 | 0x48, 0x50, 0x58, 0x60, |
| 364 | 0x68, 0x70, 0x78, 0x80, |
| 365 | }; |
| 366 | |
| 367 | /* Supply register REGNUM from the register set REGSET to register cache |
| 368 | REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */ |
| 369 | static void |
| 370 | s390_supply_regset (const struct regset *regset, struct regcache *regcache, |
| 371 | int regnum, const void *regs, size_t len) |
| 372 | { |
| 373 | const int *offset = regset->descr; |
| 374 | int i; |
| 375 | |
| 376 | for (i = 0; i < S390_NUM_REGS; i++) |
| 377 | { |
| 378 | if ((regnum == i || regnum == -1) && offset[i] != -1) |
| 379 | regcache_raw_supply (regcache, i, (const char *)regs + offset[i]); |
| 380 | } |
| 381 | } |
| 382 | |
| 383 | /* Collect register REGNUM from the register cache REGCACHE and store |
| 384 | it in the buffer specified by REGS and LEN as described by the |
| 385 | general-purpose register set REGSET. If REGNUM is -1, do this for |
| 386 | all registers in REGSET. */ |
| 387 | static void |
| 388 | s390_collect_regset (const struct regset *regset, |
| 389 | const struct regcache *regcache, |
| 390 | int regnum, void *regs, size_t len) |
| 391 | { |
| 392 | const int *offset = regset->descr; |
| 393 | int i; |
| 394 | |
| 395 | for (i = 0; i < S390_NUM_REGS; i++) |
| 396 | { |
| 397 | if ((regnum == i || regnum == -1) && offset[i] != -1) |
| 398 | regcache_raw_collect (regcache, i, (char *)regs + offset[i]); |
| 399 | } |
| 400 | } |
| 401 | |
| 402 | static const struct regset s390_gregset = { |
| 403 | s390_regmap_gregset, |
| 404 | s390_supply_regset, |
| 405 | s390_collect_regset |
| 406 | }; |
| 407 | |
| 408 | static const struct regset s390x_gregset = { |
| 409 | s390x_regmap_gregset, |
| 410 | s390_supply_regset, |
| 411 | s390_collect_regset |
| 412 | }; |
| 413 | |
| 414 | static const struct regset s390_fpregset = { |
| 415 | s390_regmap_fpregset, |
| 416 | s390_supply_regset, |
| 417 | s390_collect_regset |
| 418 | }; |
| 419 | |
| 420 | /* Return the appropriate register set for the core section identified |
| 421 | by SECT_NAME and SECT_SIZE. */ |
| 422 | static const struct regset * |
| 423 | s390_regset_from_core_section (struct gdbarch *gdbarch, |
| 424 | const char *sect_name, size_t sect_size) |
| 425 | { |
| 426 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 427 | |
| 428 | if (strcmp (sect_name, ".reg") == 0 && sect_size >= tdep->sizeof_gregset) |
| 429 | return tdep->gregset; |
| 430 | |
| 431 | if (strcmp (sect_name, ".reg2") == 0 && sect_size >= tdep->sizeof_fpregset) |
| 432 | return tdep->fpregset; |
| 433 | |
| 434 | return NULL; |
| 435 | } |
| 436 | |
| 437 | |
| 438 | /* Decoding S/390 instructions. */ |
| 439 | |
| 440 | /* Named opcode values for the S/390 instructions we recognize. Some |
| 441 | instructions have their opcode split across two fields; those are the |
| 442 | op1_* and op2_* enums. */ |
| 443 | enum |
| 444 | { |
| 445 | op1_lhi = 0xa7, op2_lhi = 0x08, |
| 446 | op1_lghi = 0xa7, op2_lghi = 0x09, |
| 447 | op1_lgfi = 0xc0, op2_lgfi = 0x01, |
| 448 | op_lr = 0x18, |
| 449 | op_lgr = 0xb904, |
| 450 | op_l = 0x58, |
| 451 | op1_ly = 0xe3, op2_ly = 0x58, |
| 452 | op1_lg = 0xe3, op2_lg = 0x04, |
| 453 | op_lm = 0x98, |
| 454 | op1_lmy = 0xeb, op2_lmy = 0x98, |
| 455 | op1_lmg = 0xeb, op2_lmg = 0x04, |
| 456 | op_st = 0x50, |
| 457 | op1_sty = 0xe3, op2_sty = 0x50, |
| 458 | op1_stg = 0xe3, op2_stg = 0x24, |
| 459 | op_std = 0x60, |
| 460 | op_stm = 0x90, |
| 461 | op1_stmy = 0xeb, op2_stmy = 0x90, |
| 462 | op1_stmg = 0xeb, op2_stmg = 0x24, |
| 463 | op1_aghi = 0xa7, op2_aghi = 0x0b, |
| 464 | op1_ahi = 0xa7, op2_ahi = 0x0a, |
| 465 | op1_agfi = 0xc2, op2_agfi = 0x08, |
| 466 | op1_afi = 0xc2, op2_afi = 0x09, |
| 467 | op1_algfi= 0xc2, op2_algfi= 0x0a, |
| 468 | op1_alfi = 0xc2, op2_alfi = 0x0b, |
| 469 | op_ar = 0x1a, |
| 470 | op_agr = 0xb908, |
| 471 | op_a = 0x5a, |
| 472 | op1_ay = 0xe3, op2_ay = 0x5a, |
| 473 | op1_ag = 0xe3, op2_ag = 0x08, |
| 474 | op1_slgfi= 0xc2, op2_slgfi= 0x04, |
| 475 | op1_slfi = 0xc2, op2_slfi = 0x05, |
| 476 | op_sr = 0x1b, |
| 477 | op_sgr = 0xb909, |
| 478 | op_s = 0x5b, |
| 479 | op1_sy = 0xe3, op2_sy = 0x5b, |
| 480 | op1_sg = 0xe3, op2_sg = 0x09, |
| 481 | op_nr = 0x14, |
| 482 | op_ngr = 0xb980, |
| 483 | op_la = 0x41, |
| 484 | op1_lay = 0xe3, op2_lay = 0x71, |
| 485 | op1_larl = 0xc0, op2_larl = 0x00, |
| 486 | op_basr = 0x0d, |
| 487 | op_bas = 0x4d, |
| 488 | op_bcr = 0x07, |
| 489 | op_bc = 0x0d, |
| 490 | op1_bras = 0xa7, op2_bras = 0x05, |
| 491 | op1_brasl= 0xc0, op2_brasl= 0x05, |
| 492 | op1_brc = 0xa7, op2_brc = 0x04, |
| 493 | op1_brcl = 0xc0, op2_brcl = 0x04, |
| 494 | }; |
| 495 | |
| 496 | |
| 497 | /* Read a single instruction from address AT. */ |
| 498 | |
| 499 | #define S390_MAX_INSTR_SIZE 6 |
| 500 | static int |
| 501 | s390_readinstruction (bfd_byte instr[], CORE_ADDR at) |
| 502 | { |
| 503 | static int s390_instrlen[] = { 2, 4, 4, 6 }; |
| 504 | int instrlen; |
| 505 | |
| 506 | if (target_read_memory (at, &instr[0], 2)) |
| 507 | return -1; |
| 508 | instrlen = s390_instrlen[instr[0] >> 6]; |
| 509 | if (instrlen > 2) |
| 510 | { |
| 511 | if (target_read_memory (at + 2, &instr[2], instrlen - 2)) |
| 512 | return -1; |
| 513 | } |
| 514 | return instrlen; |
| 515 | } |
| 516 | |
| 517 | |
| 518 | /* The functions below are for recognizing and decoding S/390 |
| 519 | instructions of various formats. Each of them checks whether INSN |
| 520 | is an instruction of the given format, with the specified opcodes. |
| 521 | If it is, it sets the remaining arguments to the values of the |
| 522 | instruction's fields, and returns a non-zero value; otherwise, it |
| 523 | returns zero. |
| 524 | |
| 525 | These functions' arguments appear in the order they appear in the |
| 526 | instruction, not in the machine-language form. So, opcodes always |
| 527 | come first, even though they're sometimes scattered around the |
| 528 | instructions. And displacements appear before base and extension |
| 529 | registers, as they do in the assembly syntax, not at the end, as |
| 530 | they do in the machine language. */ |
| 531 | static int |
| 532 | is_ri (bfd_byte *insn, int op1, int op2, unsigned int *r1, int *i2) |
| 533 | { |
| 534 | if (insn[0] == op1 && (insn[1] & 0xf) == op2) |
| 535 | { |
| 536 | *r1 = (insn[1] >> 4) & 0xf; |
| 537 | /* i2 is a 16-bit signed quantity. */ |
| 538 | *i2 = (((insn[2] << 8) | insn[3]) ^ 0x8000) - 0x8000; |
| 539 | return 1; |
| 540 | } |
| 541 | else |
| 542 | return 0; |
| 543 | } |
| 544 | |
| 545 | |
| 546 | static int |
| 547 | is_ril (bfd_byte *insn, int op1, int op2, |
| 548 | unsigned int *r1, int *i2) |
| 549 | { |
| 550 | if (insn[0] == op1 && (insn[1] & 0xf) == op2) |
| 551 | { |
| 552 | *r1 = (insn[1] >> 4) & 0xf; |
| 553 | /* i2 is a signed quantity. If the host 'int' is 32 bits long, |
| 554 | no sign extension is necessary, but we don't want to assume |
| 555 | that. */ |
| 556 | *i2 = (((insn[2] << 24) |
| 557 | | (insn[3] << 16) |
| 558 | | (insn[4] << 8) |
| 559 | | (insn[5])) ^ 0x80000000) - 0x80000000; |
| 560 | return 1; |
| 561 | } |
| 562 | else |
| 563 | return 0; |
| 564 | } |
| 565 | |
| 566 | |
| 567 | static int |
| 568 | is_rr (bfd_byte *insn, int op, unsigned int *r1, unsigned int *r2) |
| 569 | { |
| 570 | if (insn[0] == op) |
| 571 | { |
| 572 | *r1 = (insn[1] >> 4) & 0xf; |
| 573 | *r2 = insn[1] & 0xf; |
| 574 | return 1; |
| 575 | } |
| 576 | else |
| 577 | return 0; |
| 578 | } |
| 579 | |
| 580 | |
| 581 | static int |
| 582 | is_rre (bfd_byte *insn, int op, unsigned int *r1, unsigned int *r2) |
| 583 | { |
| 584 | if (((insn[0] << 8) | insn[1]) == op) |
| 585 | { |
| 586 | /* Yes, insn[3]. insn[2] is unused in RRE format. */ |
| 587 | *r1 = (insn[3] >> 4) & 0xf; |
| 588 | *r2 = insn[3] & 0xf; |
| 589 | return 1; |
| 590 | } |
| 591 | else |
| 592 | return 0; |
| 593 | } |
| 594 | |
| 595 | |
| 596 | static int |
| 597 | is_rs (bfd_byte *insn, int op, |
| 598 | unsigned int *r1, unsigned int *r3, unsigned int *d2, unsigned int *b2) |
| 599 | { |
| 600 | if (insn[0] == op) |
| 601 | { |
| 602 | *r1 = (insn[1] >> 4) & 0xf; |
| 603 | *r3 = insn[1] & 0xf; |
| 604 | *b2 = (insn[2] >> 4) & 0xf; |
| 605 | *d2 = ((insn[2] & 0xf) << 8) | insn[3]; |
| 606 | return 1; |
| 607 | } |
| 608 | else |
| 609 | return 0; |
| 610 | } |
| 611 | |
| 612 | |
| 613 | static int |
| 614 | is_rsy (bfd_byte *insn, int op1, int op2, |
| 615 | unsigned int *r1, unsigned int *r3, unsigned int *d2, unsigned int *b2) |
| 616 | { |
| 617 | if (insn[0] == op1 |
| 618 | && insn[5] == op2) |
| 619 | { |
| 620 | *r1 = (insn[1] >> 4) & 0xf; |
| 621 | *r3 = insn[1] & 0xf; |
| 622 | *b2 = (insn[2] >> 4) & 0xf; |
| 623 | /* The 'long displacement' is a 20-bit signed integer. */ |
| 624 | *d2 = ((((insn[2] & 0xf) << 8) | insn[3] | (insn[4] << 12)) |
| 625 | ^ 0x80000) - 0x80000; |
| 626 | return 1; |
| 627 | } |
| 628 | else |
| 629 | return 0; |
| 630 | } |
| 631 | |
| 632 | |
| 633 | static int |
| 634 | is_rx (bfd_byte *insn, int op, |
| 635 | unsigned int *r1, unsigned int *d2, unsigned int *x2, unsigned int *b2) |
| 636 | { |
| 637 | if (insn[0] == op) |
| 638 | { |
| 639 | *r1 = (insn[1] >> 4) & 0xf; |
| 640 | *x2 = insn[1] & 0xf; |
| 641 | *b2 = (insn[2] >> 4) & 0xf; |
| 642 | *d2 = ((insn[2] & 0xf) << 8) | insn[3]; |
| 643 | return 1; |
| 644 | } |
| 645 | else |
| 646 | return 0; |
| 647 | } |
| 648 | |
| 649 | |
| 650 | static int |
| 651 | is_rxy (bfd_byte *insn, int op1, int op2, |
| 652 | unsigned int *r1, unsigned int *d2, unsigned int *x2, unsigned int *b2) |
| 653 | { |
| 654 | if (insn[0] == op1 |
| 655 | && insn[5] == op2) |
| 656 | { |
| 657 | *r1 = (insn[1] >> 4) & 0xf; |
| 658 | *x2 = insn[1] & 0xf; |
| 659 | *b2 = (insn[2] >> 4) & 0xf; |
| 660 | /* The 'long displacement' is a 20-bit signed integer. */ |
| 661 | *d2 = ((((insn[2] & 0xf) << 8) | insn[3] | (insn[4] << 12)) |
| 662 | ^ 0x80000) - 0x80000; |
| 663 | return 1; |
| 664 | } |
| 665 | else |
| 666 | return 0; |
| 667 | } |
| 668 | |
| 669 | |
| 670 | /* Prologue analysis. */ |
| 671 | |
| 672 | #define S390_NUM_GPRS 16 |
| 673 | #define S390_NUM_FPRS 16 |
| 674 | |
| 675 | struct s390_prologue_data { |
| 676 | |
| 677 | /* The stack. */ |
| 678 | struct pv_area *stack; |
| 679 | |
| 680 | /* The size of a GPR or FPR. */ |
| 681 | int gpr_size; |
| 682 | int fpr_size; |
| 683 | |
| 684 | /* The general-purpose registers. */ |
| 685 | pv_t gpr[S390_NUM_GPRS]; |
| 686 | |
| 687 | /* The floating-point registers. */ |
| 688 | pv_t fpr[S390_NUM_FPRS]; |
| 689 | |
| 690 | /* The offset relative to the CFA where the incoming GPR N was saved |
| 691 | by the function prologue. 0 if not saved or unknown. */ |
| 692 | int gpr_slot[S390_NUM_GPRS]; |
| 693 | |
| 694 | /* Likewise for FPRs. */ |
| 695 | int fpr_slot[S390_NUM_FPRS]; |
| 696 | |
| 697 | /* Nonzero if the backchain was saved. This is assumed to be the |
| 698 | case when the incoming SP is saved at the current SP location. */ |
| 699 | int back_chain_saved_p; |
| 700 | }; |
| 701 | |
| 702 | /* Return the effective address for an X-style instruction, like: |
| 703 | |
| 704 | L R1, D2(X2, B2) |
| 705 | |
| 706 | Here, X2 and B2 are registers, and D2 is a signed 20-bit |
| 707 | constant; the effective address is the sum of all three. If either |
| 708 | X2 or B2 are zero, then it doesn't contribute to the sum --- this |
| 709 | means that r0 can't be used as either X2 or B2. */ |
| 710 | static pv_t |
| 711 | s390_addr (struct s390_prologue_data *data, |
| 712 | int d2, unsigned int x2, unsigned int b2) |
| 713 | { |
| 714 | pv_t result; |
| 715 | |
| 716 | result = pv_constant (d2); |
| 717 | if (x2) |
| 718 | result = pv_add (result, data->gpr[x2]); |
| 719 | if (b2) |
| 720 | result = pv_add (result, data->gpr[b2]); |
| 721 | |
| 722 | return result; |
| 723 | } |
| 724 | |
| 725 | /* Do a SIZE-byte store of VALUE to D2(X2,B2). */ |
| 726 | static void |
| 727 | s390_store (struct s390_prologue_data *data, |
| 728 | int d2, unsigned int x2, unsigned int b2, CORE_ADDR size, |
| 729 | pv_t value) |
| 730 | { |
| 731 | pv_t addr = s390_addr (data, d2, x2, b2); |
| 732 | pv_t offset; |
| 733 | |
| 734 | /* Check whether we are storing the backchain. */ |
| 735 | offset = pv_subtract (data->gpr[S390_SP_REGNUM - S390_R0_REGNUM], addr); |
| 736 | |
| 737 | if (pv_is_constant (offset) && offset.k == 0) |
| 738 | if (size == data->gpr_size |
| 739 | && pv_is_register_k (value, S390_SP_REGNUM, 0)) |
| 740 | { |
| 741 | data->back_chain_saved_p = 1; |
| 742 | return; |
| 743 | } |
| 744 | |
| 745 | |
| 746 | /* Check whether we are storing a register into the stack. */ |
| 747 | if (!pv_area_store_would_trash (data->stack, addr)) |
| 748 | pv_area_store (data->stack, addr, size, value); |
| 749 | |
| 750 | |
| 751 | /* Note: If this is some store we cannot identify, you might think we |
| 752 | should forget our cached values, as any of those might have been hit. |
| 753 | |
| 754 | However, we make the assumption that the register save areas are only |
| 755 | ever stored to once in any given function, and we do recognize these |
| 756 | stores. Thus every store we cannot recognize does not hit our data. */ |
| 757 | } |
| 758 | |
| 759 | /* Do a SIZE-byte load from D2(X2,B2). */ |
| 760 | static pv_t |
| 761 | s390_load (struct s390_prologue_data *data, |
| 762 | int d2, unsigned int x2, unsigned int b2, CORE_ADDR size) |
| 763 | |
| 764 | { |
| 765 | pv_t addr = s390_addr (data, d2, x2, b2); |
| 766 | pv_t offset; |
| 767 | |
| 768 | /* If it's a load from an in-line constant pool, then we can |
| 769 | simulate that, under the assumption that the code isn't |
| 770 | going to change between the time the processor actually |
| 771 | executed it creating the current frame, and the time when |
| 772 | we're analyzing the code to unwind past that frame. */ |
| 773 | if (pv_is_constant (addr)) |
| 774 | { |
| 775 | struct target_section *secp; |
| 776 | secp = target_section_by_addr (¤t_target, addr.k); |
| 777 | if (secp != NULL |
| 778 | && (bfd_get_section_flags (secp->bfd, secp->the_bfd_section) |
| 779 | & SEC_READONLY)) |
| 780 | return pv_constant (read_memory_integer (addr.k, size)); |
| 781 | } |
| 782 | |
| 783 | /* Check whether we are accessing one of our save slots. */ |
| 784 | return pv_area_fetch (data->stack, addr, size); |
| 785 | } |
| 786 | |
| 787 | /* Function for finding saved registers in a 'struct pv_area'; we pass |
| 788 | this to pv_area_scan. |
| 789 | |
| 790 | If VALUE is a saved register, ADDR says it was saved at a constant |
| 791 | offset from the frame base, and SIZE indicates that the whole |
| 792 | register was saved, record its offset in the reg_offset table in |
| 793 | PROLOGUE_UNTYPED. */ |
| 794 | static void |
| 795 | s390_check_for_saved (void *data_untyped, pv_t addr, CORE_ADDR size, pv_t value) |
| 796 | { |
| 797 | struct s390_prologue_data *data = data_untyped; |
| 798 | int i, offset; |
| 799 | |
| 800 | if (!pv_is_register (addr, S390_SP_REGNUM)) |
| 801 | return; |
| 802 | |
| 803 | offset = 16 * data->gpr_size + 32 - addr.k; |
| 804 | |
| 805 | /* If we are storing the original value of a register, we want to |
| 806 | record the CFA offset. If the same register is stored multiple |
| 807 | times, the stack slot with the highest address counts. */ |
| 808 | |
| 809 | for (i = 0; i < S390_NUM_GPRS; i++) |
| 810 | if (size == data->gpr_size |
| 811 | && pv_is_register_k (value, S390_R0_REGNUM + i, 0)) |
| 812 | if (data->gpr_slot[i] == 0 |
| 813 | || data->gpr_slot[i] > offset) |
| 814 | { |
| 815 | data->gpr_slot[i] = offset; |
| 816 | return; |
| 817 | } |
| 818 | |
| 819 | for (i = 0; i < S390_NUM_FPRS; i++) |
| 820 | if (size == data->fpr_size |
| 821 | && pv_is_register_k (value, S390_F0_REGNUM + i, 0)) |
| 822 | if (data->fpr_slot[i] == 0 |
| 823 | || data->fpr_slot[i] > offset) |
| 824 | { |
| 825 | data->fpr_slot[i] = offset; |
| 826 | return; |
| 827 | } |
| 828 | } |
| 829 | |
| 830 | /* Analyze the prologue of the function starting at START_PC, |
| 831 | continuing at most until CURRENT_PC. Initialize DATA to |
| 832 | hold all information we find out about the state of the registers |
| 833 | and stack slots. Return the address of the instruction after |
| 834 | the last one that changed the SP, FP, or back chain; or zero |
| 835 | on error. */ |
| 836 | static CORE_ADDR |
| 837 | s390_analyze_prologue (struct gdbarch *gdbarch, |
| 838 | CORE_ADDR start_pc, |
| 839 | CORE_ADDR current_pc, |
| 840 | struct s390_prologue_data *data) |
| 841 | { |
| 842 | int word_size = gdbarch_ptr_bit (gdbarch) / 8; |
| 843 | |
| 844 | /* Our return value: |
| 845 | The address of the instruction after the last one that changed |
| 846 | the SP, FP, or back chain; zero if we got an error trying to |
| 847 | read memory. */ |
| 848 | CORE_ADDR result = start_pc; |
| 849 | |
| 850 | /* The current PC for our abstract interpretation. */ |
| 851 | CORE_ADDR pc; |
| 852 | |
| 853 | /* The address of the next instruction after that. */ |
| 854 | CORE_ADDR next_pc; |
| 855 | |
| 856 | /* Set up everything's initial value. */ |
| 857 | { |
| 858 | int i; |
| 859 | |
| 860 | data->stack = make_pv_area (S390_SP_REGNUM); |
| 861 | |
| 862 | /* For the purpose of prologue tracking, we consider the GPR size to |
| 863 | be equal to the ABI word size, even if it is actually larger |
| 864 | (i.e. when running a 32-bit binary under a 64-bit kernel). */ |
| 865 | data->gpr_size = word_size; |
| 866 | data->fpr_size = 8; |
| 867 | |
| 868 | for (i = 0; i < S390_NUM_GPRS; i++) |
| 869 | data->gpr[i] = pv_register (S390_R0_REGNUM + i, 0); |
| 870 | |
| 871 | for (i = 0; i < S390_NUM_FPRS; i++) |
| 872 | data->fpr[i] = pv_register (S390_F0_REGNUM + i, 0); |
| 873 | |
| 874 | for (i = 0; i < S390_NUM_GPRS; i++) |
| 875 | data->gpr_slot[i] = 0; |
| 876 | |
| 877 | for (i = 0; i < S390_NUM_FPRS; i++) |
| 878 | data->fpr_slot[i] = 0; |
| 879 | |
| 880 | data->back_chain_saved_p = 0; |
| 881 | } |
| 882 | |
| 883 | /* Start interpreting instructions, until we hit the frame's |
| 884 | current PC or the first branch instruction. */ |
| 885 | for (pc = start_pc; pc > 0 && pc < current_pc; pc = next_pc) |
| 886 | { |
| 887 | bfd_byte insn[S390_MAX_INSTR_SIZE]; |
| 888 | int insn_len = s390_readinstruction (insn, pc); |
| 889 | |
| 890 | bfd_byte dummy[S390_MAX_INSTR_SIZE] = { 0 }; |
| 891 | bfd_byte *insn32 = word_size == 4 ? insn : dummy; |
| 892 | bfd_byte *insn64 = word_size == 8 ? insn : dummy; |
| 893 | |
| 894 | /* Fields for various kinds of instructions. */ |
| 895 | unsigned int b2, r1, r2, x2, r3; |
| 896 | int i2, d2; |
| 897 | |
| 898 | /* The values of SP and FP before this instruction, |
| 899 | for detecting instructions that change them. */ |
| 900 | pv_t pre_insn_sp, pre_insn_fp; |
| 901 | /* Likewise for the flag whether the back chain was saved. */ |
| 902 | int pre_insn_back_chain_saved_p; |
| 903 | |
| 904 | /* If we got an error trying to read the instruction, report it. */ |
| 905 | if (insn_len < 0) |
| 906 | { |
| 907 | result = 0; |
| 908 | break; |
| 909 | } |
| 910 | |
| 911 | next_pc = pc + insn_len; |
| 912 | |
| 913 | pre_insn_sp = data->gpr[S390_SP_REGNUM - S390_R0_REGNUM]; |
| 914 | pre_insn_fp = data->gpr[S390_FRAME_REGNUM - S390_R0_REGNUM]; |
| 915 | pre_insn_back_chain_saved_p = data->back_chain_saved_p; |
| 916 | |
| 917 | |
| 918 | /* LHI r1, i2 --- load halfword immediate. */ |
| 919 | /* LGHI r1, i2 --- load halfword immediate (64-bit version). */ |
| 920 | /* LGFI r1, i2 --- load fullword immediate. */ |
| 921 | if (is_ri (insn32, op1_lhi, op2_lhi, &r1, &i2) |
| 922 | || is_ri (insn64, op1_lghi, op2_lghi, &r1, &i2) |
| 923 | || is_ril (insn, op1_lgfi, op2_lgfi, &r1, &i2)) |
| 924 | data->gpr[r1] = pv_constant (i2); |
| 925 | |
| 926 | /* LR r1, r2 --- load from register. */ |
| 927 | /* LGR r1, r2 --- load from register (64-bit version). */ |
| 928 | else if (is_rr (insn32, op_lr, &r1, &r2) |
| 929 | || is_rre (insn64, op_lgr, &r1, &r2)) |
| 930 | data->gpr[r1] = data->gpr[r2]; |
| 931 | |
| 932 | /* L r1, d2(x2, b2) --- load. */ |
| 933 | /* LY r1, d2(x2, b2) --- load (long-displacement version). */ |
| 934 | /* LG r1, d2(x2, b2) --- load (64-bit version). */ |
| 935 | else if (is_rx (insn32, op_l, &r1, &d2, &x2, &b2) |
| 936 | || is_rxy (insn32, op1_ly, op2_ly, &r1, &d2, &x2, &b2) |
| 937 | || is_rxy (insn64, op1_lg, op2_lg, &r1, &d2, &x2, &b2)) |
| 938 | data->gpr[r1] = s390_load (data, d2, x2, b2, data->gpr_size); |
| 939 | |
| 940 | /* ST r1, d2(x2, b2) --- store. */ |
| 941 | /* STY r1, d2(x2, b2) --- store (long-displacement version). */ |
| 942 | /* STG r1, d2(x2, b2) --- store (64-bit version). */ |
| 943 | else if (is_rx (insn32, op_st, &r1, &d2, &x2, &b2) |
| 944 | || is_rxy (insn32, op1_sty, op2_sty, &r1, &d2, &x2, &b2) |
| 945 | || is_rxy (insn64, op1_stg, op2_stg, &r1, &d2, &x2, &b2)) |
| 946 | s390_store (data, d2, x2, b2, data->gpr_size, data->gpr[r1]); |
| 947 | |
| 948 | /* STD r1, d2(x2,b2) --- store floating-point register. */ |
| 949 | else if (is_rx (insn, op_std, &r1, &d2, &x2, &b2)) |
| 950 | s390_store (data, d2, x2, b2, data->fpr_size, data->fpr[r1]); |
| 951 | |
| 952 | /* STM r1, r3, d2(b2) --- store multiple. */ |
| 953 | /* STMY r1, r3, d2(b2) --- store multiple (long-displacement version). */ |
| 954 | /* STMG r1, r3, d2(b2) --- store multiple (64-bit version). */ |
| 955 | else if (is_rs (insn32, op_stm, &r1, &r3, &d2, &b2) |
| 956 | || is_rsy (insn32, op1_stmy, op2_stmy, &r1, &r3, &d2, &b2) |
| 957 | || is_rsy (insn64, op1_stmg, op2_stmg, &r1, &r3, &d2, &b2)) |
| 958 | { |
| 959 | for (; r1 <= r3; r1++, d2 += data->gpr_size) |
| 960 | s390_store (data, d2, 0, b2, data->gpr_size, data->gpr[r1]); |
| 961 | } |
| 962 | |
| 963 | /* AHI r1, i2 --- add halfword immediate. */ |
| 964 | /* AGHI r1, i2 --- add halfword immediate (64-bit version). */ |
| 965 | /* AFI r1, i2 --- add fullword immediate. */ |
| 966 | /* AGFI r1, i2 --- add fullword immediate (64-bit version). */ |
| 967 | else if (is_ri (insn32, op1_ahi, op2_ahi, &r1, &i2) |
| 968 | || is_ri (insn64, op1_aghi, op2_aghi, &r1, &i2) |
| 969 | || is_ril (insn32, op1_afi, op2_afi, &r1, &i2) |
| 970 | || is_ril (insn64, op1_agfi, op2_agfi, &r1, &i2)) |
| 971 | data->gpr[r1] = pv_add_constant (data->gpr[r1], i2); |
| 972 | |
| 973 | /* ALFI r1, i2 --- add logical immediate. */ |
| 974 | /* ALGFI r1, i2 --- add logical immediate (64-bit version). */ |
| 975 | else if (is_ril (insn32, op1_alfi, op2_alfi, &r1, &i2) |
| 976 | || is_ril (insn64, op1_algfi, op2_algfi, &r1, &i2)) |
| 977 | data->gpr[r1] = pv_add_constant (data->gpr[r1], |
| 978 | (CORE_ADDR)i2 & 0xffffffff); |
| 979 | |
| 980 | /* AR r1, r2 -- add register. */ |
| 981 | /* AGR r1, r2 -- add register (64-bit version). */ |
| 982 | else if (is_rr (insn32, op_ar, &r1, &r2) |
| 983 | || is_rre (insn64, op_agr, &r1, &r2)) |
| 984 | data->gpr[r1] = pv_add (data->gpr[r1], data->gpr[r2]); |
| 985 | |
| 986 | /* A r1, d2(x2, b2) -- add. */ |
| 987 | /* AY r1, d2(x2, b2) -- add (long-displacement version). */ |
| 988 | /* AG r1, d2(x2, b2) -- add (64-bit version). */ |
| 989 | else if (is_rx (insn32, op_a, &r1, &d2, &x2, &b2) |
| 990 | || is_rxy (insn32, op1_ay, op2_ay, &r1, &d2, &x2, &b2) |
| 991 | || is_rxy (insn64, op1_ag, op2_ag, &r1, &d2, &x2, &b2)) |
| 992 | data->gpr[r1] = pv_add (data->gpr[r1], |
| 993 | s390_load (data, d2, x2, b2, data->gpr_size)); |
| 994 | |
| 995 | /* SLFI r1, i2 --- subtract logical immediate. */ |
| 996 | /* SLGFI r1, i2 --- subtract logical immediate (64-bit version). */ |
| 997 | else if (is_ril (insn32, op1_slfi, op2_slfi, &r1, &i2) |
| 998 | || is_ril (insn64, op1_slgfi, op2_slgfi, &r1, &i2)) |
| 999 | data->gpr[r1] = pv_add_constant (data->gpr[r1], |
| 1000 | -((CORE_ADDR)i2 & 0xffffffff)); |
| 1001 | |
| 1002 | /* SR r1, r2 -- subtract register. */ |
| 1003 | /* SGR r1, r2 -- subtract register (64-bit version). */ |
| 1004 | else if (is_rr (insn32, op_sr, &r1, &r2) |
| 1005 | || is_rre (insn64, op_sgr, &r1, &r2)) |
| 1006 | data->gpr[r1] = pv_subtract (data->gpr[r1], data->gpr[r2]); |
| 1007 | |
| 1008 | /* S r1, d2(x2, b2) -- subtract. */ |
| 1009 | /* SY r1, d2(x2, b2) -- subtract (long-displacement version). */ |
| 1010 | /* SG r1, d2(x2, b2) -- subtract (64-bit version). */ |
| 1011 | else if (is_rx (insn32, op_s, &r1, &d2, &x2, &b2) |
| 1012 | || is_rxy (insn32, op1_sy, op2_sy, &r1, &d2, &x2, &b2) |
| 1013 | || is_rxy (insn64, op1_sg, op2_sg, &r1, &d2, &x2, &b2)) |
| 1014 | data->gpr[r1] = pv_subtract (data->gpr[r1], |
| 1015 | s390_load (data, d2, x2, b2, data->gpr_size)); |
| 1016 | |
| 1017 | /* LA r1, d2(x2, b2) --- load address. */ |
| 1018 | /* LAY r1, d2(x2, b2) --- load address (long-displacement version). */ |
| 1019 | else if (is_rx (insn, op_la, &r1, &d2, &x2, &b2) |
| 1020 | || is_rxy (insn, op1_lay, op2_lay, &r1, &d2, &x2, &b2)) |
| 1021 | data->gpr[r1] = s390_addr (data, d2, x2, b2); |
| 1022 | |
| 1023 | /* LARL r1, i2 --- load address relative long. */ |
| 1024 | else if (is_ril (insn, op1_larl, op2_larl, &r1, &i2)) |
| 1025 | data->gpr[r1] = pv_constant (pc + i2 * 2); |
| 1026 | |
| 1027 | /* BASR r1, 0 --- branch and save. |
| 1028 | Since r2 is zero, this saves the PC in r1, but doesn't branch. */ |
| 1029 | else if (is_rr (insn, op_basr, &r1, &r2) |
| 1030 | && r2 == 0) |
| 1031 | data->gpr[r1] = pv_constant (next_pc); |
| 1032 | |
| 1033 | /* BRAS r1, i2 --- branch relative and save. */ |
| 1034 | else if (is_ri (insn, op1_bras, op2_bras, &r1, &i2)) |
| 1035 | { |
| 1036 | data->gpr[r1] = pv_constant (next_pc); |
| 1037 | next_pc = pc + i2 * 2; |
| 1038 | |
| 1039 | /* We'd better not interpret any backward branches. We'll |
| 1040 | never terminate. */ |
| 1041 | if (next_pc <= pc) |
| 1042 | break; |
| 1043 | } |
| 1044 | |
| 1045 | /* Terminate search when hitting any other branch instruction. */ |
| 1046 | else if (is_rr (insn, op_basr, &r1, &r2) |
| 1047 | || is_rx (insn, op_bas, &r1, &d2, &x2, &b2) |
| 1048 | || is_rr (insn, op_bcr, &r1, &r2) |
| 1049 | || is_rx (insn, op_bc, &r1, &d2, &x2, &b2) |
| 1050 | || is_ri (insn, op1_brc, op2_brc, &r1, &i2) |
| 1051 | || is_ril (insn, op1_brcl, op2_brcl, &r1, &i2) |
| 1052 | || is_ril (insn, op1_brasl, op2_brasl, &r2, &i2)) |
| 1053 | break; |
| 1054 | |
| 1055 | else |
| 1056 | /* An instruction we don't know how to simulate. The only |
| 1057 | safe thing to do would be to set every value we're tracking |
| 1058 | to 'unknown'. Instead, we'll be optimistic: we assume that |
| 1059 | we *can* interpret every instruction that the compiler uses |
| 1060 | to manipulate any of the data we're interested in here -- |
| 1061 | then we can just ignore anything else. */ |
| 1062 | ; |
| 1063 | |
| 1064 | /* Record the address after the last instruction that changed |
| 1065 | the FP, SP, or backlink. Ignore instructions that changed |
| 1066 | them back to their original values --- those are probably |
| 1067 | restore instructions. (The back chain is never restored, |
| 1068 | just popped.) */ |
| 1069 | { |
| 1070 | pv_t sp = data->gpr[S390_SP_REGNUM - S390_R0_REGNUM]; |
| 1071 | pv_t fp = data->gpr[S390_FRAME_REGNUM - S390_R0_REGNUM]; |
| 1072 | |
| 1073 | if ((! pv_is_identical (pre_insn_sp, sp) |
| 1074 | && ! pv_is_register_k (sp, S390_SP_REGNUM, 0) |
| 1075 | && sp.kind != pvk_unknown) |
| 1076 | || (! pv_is_identical (pre_insn_fp, fp) |
| 1077 | && ! pv_is_register_k (fp, S390_FRAME_REGNUM, 0) |
| 1078 | && fp.kind != pvk_unknown) |
| 1079 | || pre_insn_back_chain_saved_p != data->back_chain_saved_p) |
| 1080 | result = next_pc; |
| 1081 | } |
| 1082 | } |
| 1083 | |
| 1084 | /* Record where all the registers were saved. */ |
| 1085 | pv_area_scan (data->stack, s390_check_for_saved, data); |
| 1086 | |
| 1087 | free_pv_area (data->stack); |
| 1088 | data->stack = NULL; |
| 1089 | |
| 1090 | return result; |
| 1091 | } |
| 1092 | |
| 1093 | /* Advance PC across any function entry prologue instructions to reach |
| 1094 | some "real" code. */ |
| 1095 | static CORE_ADDR |
| 1096 | s390_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc) |
| 1097 | { |
| 1098 | struct s390_prologue_data data; |
| 1099 | CORE_ADDR skip_pc; |
| 1100 | skip_pc = s390_analyze_prologue (gdbarch, pc, (CORE_ADDR)-1, &data); |
| 1101 | return skip_pc ? skip_pc : pc; |
| 1102 | } |
| 1103 | |
| 1104 | /* Return true if we are in the functin's epilogue, i.e. after the |
| 1105 | instruction that destroyed the function's stack frame. */ |
| 1106 | static int |
| 1107 | s390_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc) |
| 1108 | { |
| 1109 | int word_size = gdbarch_ptr_bit (gdbarch) / 8; |
| 1110 | |
| 1111 | /* In frameless functions, there's not frame to destroy and thus |
| 1112 | we don't care about the epilogue. |
| 1113 | |
| 1114 | In functions with frame, the epilogue sequence is a pair of |
| 1115 | a LM-type instruction that restores (amongst others) the |
| 1116 | return register %r14 and the stack pointer %r15, followed |
| 1117 | by a branch 'br %r14' --or equivalent-- that effects the |
| 1118 | actual return. |
| 1119 | |
| 1120 | In that situation, this function needs to return 'true' in |
| 1121 | exactly one case: when pc points to that branch instruction. |
| 1122 | |
| 1123 | Thus we try to disassemble the one instructions immediately |
| 1124 | preceeding pc and check whether it is an LM-type instruction |
| 1125 | modifying the stack pointer. |
| 1126 | |
| 1127 | Note that disassembling backwards is not reliable, so there |
| 1128 | is a slight chance of false positives here ... */ |
| 1129 | |
| 1130 | bfd_byte insn[6]; |
| 1131 | unsigned int r1, r3, b2; |
| 1132 | int d2; |
| 1133 | |
| 1134 | if (word_size == 4 |
| 1135 | && !target_read_memory (pc - 4, insn, 4) |
| 1136 | && is_rs (insn, op_lm, &r1, &r3, &d2, &b2) |
| 1137 | && r3 == S390_SP_REGNUM - S390_R0_REGNUM) |
| 1138 | return 1; |
| 1139 | |
| 1140 | if (word_size == 4 |
| 1141 | && !target_read_memory (pc - 6, insn, 6) |
| 1142 | && is_rsy (insn, op1_lmy, op2_lmy, &r1, &r3, &d2, &b2) |
| 1143 | && r3 == S390_SP_REGNUM - S390_R0_REGNUM) |
| 1144 | return 1; |
| 1145 | |
| 1146 | if (word_size == 8 |
| 1147 | && !target_read_memory (pc - 6, insn, 6) |
| 1148 | && is_rsy (insn, op1_lmg, op2_lmg, &r1, &r3, &d2, &b2) |
| 1149 | && r3 == S390_SP_REGNUM - S390_R0_REGNUM) |
| 1150 | return 1; |
| 1151 | |
| 1152 | return 0; |
| 1153 | } |
| 1154 | |
| 1155 | |
| 1156 | /* Normal stack frames. */ |
| 1157 | |
| 1158 | struct s390_unwind_cache { |
| 1159 | |
| 1160 | CORE_ADDR func; |
| 1161 | CORE_ADDR frame_base; |
| 1162 | CORE_ADDR local_base; |
| 1163 | |
| 1164 | struct trad_frame_saved_reg *saved_regs; |
| 1165 | }; |
| 1166 | |
| 1167 | static int |
| 1168 | s390_prologue_frame_unwind_cache (struct frame_info *this_frame, |
| 1169 | struct s390_unwind_cache *info) |
| 1170 | { |
| 1171 | struct gdbarch *gdbarch = get_frame_arch (this_frame); |
| 1172 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 1173 | int word_size = gdbarch_ptr_bit (gdbarch) / 8; |
| 1174 | struct s390_prologue_data data; |
| 1175 | pv_t *fp = &data.gpr[S390_FRAME_REGNUM - S390_R0_REGNUM]; |
| 1176 | pv_t *sp = &data.gpr[S390_SP_REGNUM - S390_R0_REGNUM]; |
| 1177 | int i; |
| 1178 | CORE_ADDR cfa; |
| 1179 | CORE_ADDR func; |
| 1180 | CORE_ADDR result; |
| 1181 | ULONGEST reg; |
| 1182 | CORE_ADDR prev_sp; |
| 1183 | int frame_pointer; |
| 1184 | int size; |
| 1185 | |
| 1186 | /* Try to find the function start address. If we can't find it, we don't |
| 1187 | bother searching for it -- with modern compilers this would be mostly |
| 1188 | pointless anyway. Trust that we'll either have valid DWARF-2 CFI data |
| 1189 | or else a valid backchain ... */ |
| 1190 | func = get_frame_func (this_frame); |
| 1191 | if (!func) |
| 1192 | return 0; |
| 1193 | |
| 1194 | /* Try to analyze the prologue. */ |
| 1195 | result = s390_analyze_prologue (gdbarch, func, |
| 1196 | get_frame_pc (this_frame), &data); |
| 1197 | if (!result) |
| 1198 | return 0; |
| 1199 | |
| 1200 | /* If this was successful, we should have found the instruction that |
| 1201 | sets the stack pointer register to the previous value of the stack |
| 1202 | pointer minus the frame size. */ |
| 1203 | if (!pv_is_register (*sp, S390_SP_REGNUM)) |
| 1204 | return 0; |
| 1205 | |
| 1206 | /* A frame size of zero at this point can mean either a real |
| 1207 | frameless function, or else a failure to find the prologue. |
| 1208 | Perform some sanity checks to verify we really have a |
| 1209 | frameless function. */ |
| 1210 | if (sp->k == 0) |
| 1211 | { |
| 1212 | /* If the next frame is a NORMAL_FRAME, this frame *cannot* have frame |
| 1213 | size zero. This is only possible if the next frame is a sentinel |
| 1214 | frame, a dummy frame, or a signal trampoline frame. */ |
| 1215 | /* FIXME: cagney/2004-05-01: This sanity check shouldn't be |
| 1216 | needed, instead the code should simpliy rely on its |
| 1217 | analysis. */ |
| 1218 | if (get_next_frame (this_frame) |
| 1219 | && get_frame_type (get_next_frame (this_frame)) == NORMAL_FRAME) |
| 1220 | return 0; |
| 1221 | |
| 1222 | /* If we really have a frameless function, %r14 must be valid |
| 1223 | -- in particular, it must point to a different function. */ |
| 1224 | reg = get_frame_register_unsigned (this_frame, S390_RETADDR_REGNUM); |
| 1225 | reg = gdbarch_addr_bits_remove (gdbarch, reg) - 1; |
| 1226 | if (get_pc_function_start (reg) == func) |
| 1227 | { |
| 1228 | /* However, there is one case where it *is* valid for %r14 |
| 1229 | to point to the same function -- if this is a recursive |
| 1230 | call, and we have stopped in the prologue *before* the |
| 1231 | stack frame was allocated. |
| 1232 | |
| 1233 | Recognize this case by looking ahead a bit ... */ |
| 1234 | |
| 1235 | struct s390_prologue_data data2; |
| 1236 | pv_t *sp = &data2.gpr[S390_SP_REGNUM - S390_R0_REGNUM]; |
| 1237 | |
| 1238 | if (!(s390_analyze_prologue (gdbarch, func, (CORE_ADDR)-1, &data2) |
| 1239 | && pv_is_register (*sp, S390_SP_REGNUM) |
| 1240 | && sp->k != 0)) |
| 1241 | return 0; |
| 1242 | } |
| 1243 | } |
| 1244 | |
| 1245 | |
| 1246 | /* OK, we've found valid prologue data. */ |
| 1247 | size = -sp->k; |
| 1248 | |
| 1249 | /* If the frame pointer originally also holds the same value |
| 1250 | as the stack pointer, we're probably using it. If it holds |
| 1251 | some other value -- even a constant offset -- it is most |
| 1252 | likely used as temp register. */ |
| 1253 | if (pv_is_identical (*sp, *fp)) |
| 1254 | frame_pointer = S390_FRAME_REGNUM; |
| 1255 | else |
| 1256 | frame_pointer = S390_SP_REGNUM; |
| 1257 | |
| 1258 | /* If we've detected a function with stack frame, we'll still have to |
| 1259 | treat it as frameless if we're currently within the function epilog |
| 1260 | code at a point where the frame pointer has already been restored. |
| 1261 | This can only happen in an innermost frame. */ |
| 1262 | /* FIXME: cagney/2004-05-01: This sanity check shouldn't be needed, |
| 1263 | instead the code should simpliy rely on its analysis. */ |
| 1264 | if (size > 0 |
| 1265 | && (!get_next_frame (this_frame) |
| 1266 | || get_frame_type (get_next_frame (this_frame)) != NORMAL_FRAME)) |
| 1267 | { |
| 1268 | /* See the comment in s390_in_function_epilogue_p on why this is |
| 1269 | not completely reliable ... */ |
| 1270 | if (s390_in_function_epilogue_p (gdbarch, get_frame_pc (this_frame))) |
| 1271 | { |
| 1272 | memset (&data, 0, sizeof (data)); |
| 1273 | size = 0; |
| 1274 | frame_pointer = S390_SP_REGNUM; |
| 1275 | } |
| 1276 | } |
| 1277 | |
| 1278 | /* Once we know the frame register and the frame size, we can unwind |
| 1279 | the current value of the frame register from the next frame, and |
| 1280 | add back the frame size to arrive that the previous frame's |
| 1281 | stack pointer value. */ |
| 1282 | prev_sp = get_frame_register_unsigned (this_frame, frame_pointer) + size; |
| 1283 | cfa = prev_sp + 16*word_size + 32; |
| 1284 | |
| 1285 | /* Record the addresses of all register spill slots the prologue parser |
| 1286 | has recognized. Consider only registers defined as call-saved by the |
| 1287 | ABI; for call-clobbered registers the parser may have recognized |
| 1288 | spurious stores. */ |
| 1289 | |
| 1290 | for (i = 6; i <= 15; i++) |
| 1291 | if (data.gpr_slot[i] != 0) |
| 1292 | info->saved_regs[S390_R0_REGNUM + i].addr = cfa - data.gpr_slot[i]; |
| 1293 | |
| 1294 | switch (tdep->abi) |
| 1295 | { |
| 1296 | case ABI_LINUX_S390: |
| 1297 | if (data.fpr_slot[4] != 0) |
| 1298 | info->saved_regs[S390_F4_REGNUM].addr = cfa - data.fpr_slot[4]; |
| 1299 | if (data.fpr_slot[6] != 0) |
| 1300 | info->saved_regs[S390_F6_REGNUM].addr = cfa - data.fpr_slot[6]; |
| 1301 | break; |
| 1302 | |
| 1303 | case ABI_LINUX_ZSERIES: |
| 1304 | for (i = 8; i <= 15; i++) |
| 1305 | if (data.fpr_slot[i] != 0) |
| 1306 | info->saved_regs[S390_F0_REGNUM + i].addr = cfa - data.fpr_slot[i]; |
| 1307 | break; |
| 1308 | } |
| 1309 | |
| 1310 | /* Function return will set PC to %r14. */ |
| 1311 | info->saved_regs[S390_PC_REGNUM] = info->saved_regs[S390_RETADDR_REGNUM]; |
| 1312 | |
| 1313 | /* In frameless functions, we unwind simply by moving the return |
| 1314 | address to the PC. However, if we actually stored to the |
| 1315 | save area, use that -- we might only think the function frameless |
| 1316 | because we're in the middle of the prologue ... */ |
| 1317 | if (size == 0 |
| 1318 | && !trad_frame_addr_p (info->saved_regs, S390_PC_REGNUM)) |
| 1319 | { |
| 1320 | info->saved_regs[S390_PC_REGNUM].realreg = S390_RETADDR_REGNUM; |
| 1321 | } |
| 1322 | |
| 1323 | /* Another sanity check: unless this is a frameless function, |
| 1324 | we should have found spill slots for SP and PC. |
| 1325 | If not, we cannot unwind further -- this happens e.g. in |
| 1326 | libc's thread_start routine. */ |
| 1327 | if (size > 0) |
| 1328 | { |
| 1329 | if (!trad_frame_addr_p (info->saved_regs, S390_SP_REGNUM) |
| 1330 | || !trad_frame_addr_p (info->saved_regs, S390_PC_REGNUM)) |
| 1331 | prev_sp = -1; |
| 1332 | } |
| 1333 | |
| 1334 | /* We use the current value of the frame register as local_base, |
| 1335 | and the top of the register save area as frame_base. */ |
| 1336 | if (prev_sp != -1) |
| 1337 | { |
| 1338 | info->frame_base = prev_sp + 16*word_size + 32; |
| 1339 | info->local_base = prev_sp - size; |
| 1340 | } |
| 1341 | |
| 1342 | info->func = func; |
| 1343 | return 1; |
| 1344 | } |
| 1345 | |
| 1346 | static void |
| 1347 | s390_backchain_frame_unwind_cache (struct frame_info *this_frame, |
| 1348 | struct s390_unwind_cache *info) |
| 1349 | { |
| 1350 | struct gdbarch *gdbarch = get_frame_arch (this_frame); |
| 1351 | int word_size = gdbarch_ptr_bit (gdbarch) / 8; |
| 1352 | CORE_ADDR backchain; |
| 1353 | ULONGEST reg; |
| 1354 | LONGEST sp; |
| 1355 | |
| 1356 | /* Get the backchain. */ |
| 1357 | reg = get_frame_register_unsigned (this_frame, S390_SP_REGNUM); |
| 1358 | backchain = read_memory_unsigned_integer (reg, word_size); |
| 1359 | |
| 1360 | /* A zero backchain terminates the frame chain. As additional |
| 1361 | sanity check, let's verify that the spill slot for SP in the |
| 1362 | save area pointed to by the backchain in fact links back to |
| 1363 | the save area. */ |
| 1364 | if (backchain != 0 |
| 1365 | && safe_read_memory_integer (backchain + 15*word_size, word_size, &sp) |
| 1366 | && (CORE_ADDR)sp == backchain) |
| 1367 | { |
| 1368 | /* We don't know which registers were saved, but it will have |
| 1369 | to be at least %r14 and %r15. This will allow us to continue |
| 1370 | unwinding, but other prev-frame registers may be incorrect ... */ |
| 1371 | info->saved_regs[S390_SP_REGNUM].addr = backchain + 15*word_size; |
| 1372 | info->saved_regs[S390_RETADDR_REGNUM].addr = backchain + 14*word_size; |
| 1373 | |
| 1374 | /* Function return will set PC to %r14. */ |
| 1375 | info->saved_regs[S390_PC_REGNUM] = info->saved_regs[S390_RETADDR_REGNUM]; |
| 1376 | |
| 1377 | /* We use the current value of the frame register as local_base, |
| 1378 | and the top of the register save area as frame_base. */ |
| 1379 | info->frame_base = backchain + 16*word_size + 32; |
| 1380 | info->local_base = reg; |
| 1381 | } |
| 1382 | |
| 1383 | info->func = get_frame_pc (this_frame); |
| 1384 | } |
| 1385 | |
| 1386 | static struct s390_unwind_cache * |
| 1387 | s390_frame_unwind_cache (struct frame_info *this_frame, |
| 1388 | void **this_prologue_cache) |
| 1389 | { |
| 1390 | struct s390_unwind_cache *info; |
| 1391 | if (*this_prologue_cache) |
| 1392 | return *this_prologue_cache; |
| 1393 | |
| 1394 | info = FRAME_OBSTACK_ZALLOC (struct s390_unwind_cache); |
| 1395 | *this_prologue_cache = info; |
| 1396 | info->saved_regs = trad_frame_alloc_saved_regs (this_frame); |
| 1397 | info->func = -1; |
| 1398 | info->frame_base = -1; |
| 1399 | info->local_base = -1; |
| 1400 | |
| 1401 | /* Try to use prologue analysis to fill the unwind cache. |
| 1402 | If this fails, fall back to reading the stack backchain. */ |
| 1403 | if (!s390_prologue_frame_unwind_cache (this_frame, info)) |
| 1404 | s390_backchain_frame_unwind_cache (this_frame, info); |
| 1405 | |
| 1406 | return info; |
| 1407 | } |
| 1408 | |
| 1409 | static void |
| 1410 | s390_frame_this_id (struct frame_info *this_frame, |
| 1411 | void **this_prologue_cache, |
| 1412 | struct frame_id *this_id) |
| 1413 | { |
| 1414 | struct s390_unwind_cache *info |
| 1415 | = s390_frame_unwind_cache (this_frame, this_prologue_cache); |
| 1416 | |
| 1417 | if (info->frame_base == -1) |
| 1418 | return; |
| 1419 | |
| 1420 | *this_id = frame_id_build (info->frame_base, info->func); |
| 1421 | } |
| 1422 | |
| 1423 | static struct value * |
| 1424 | s390_frame_prev_register (struct frame_info *this_frame, |
| 1425 | void **this_prologue_cache, int regnum) |
| 1426 | { |
| 1427 | struct s390_unwind_cache *info |
| 1428 | = s390_frame_unwind_cache (this_frame, this_prologue_cache); |
| 1429 | return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum); |
| 1430 | } |
| 1431 | |
| 1432 | static const struct frame_unwind s390_frame_unwind = { |
| 1433 | NORMAL_FRAME, |
| 1434 | s390_frame_this_id, |
| 1435 | s390_frame_prev_register, |
| 1436 | NULL, |
| 1437 | default_frame_sniffer |
| 1438 | }; |
| 1439 | |
| 1440 | |
| 1441 | /* Code stubs and their stack frames. For things like PLTs and NULL |
| 1442 | function calls (where there is no true frame and the return address |
| 1443 | is in the RETADDR register). */ |
| 1444 | |
| 1445 | struct s390_stub_unwind_cache |
| 1446 | { |
| 1447 | CORE_ADDR frame_base; |
| 1448 | struct trad_frame_saved_reg *saved_regs; |
| 1449 | }; |
| 1450 | |
| 1451 | static struct s390_stub_unwind_cache * |
| 1452 | s390_stub_frame_unwind_cache (struct frame_info *this_frame, |
| 1453 | void **this_prologue_cache) |
| 1454 | { |
| 1455 | struct gdbarch *gdbarch = get_frame_arch (this_frame); |
| 1456 | int word_size = gdbarch_ptr_bit (gdbarch) / 8; |
| 1457 | struct s390_stub_unwind_cache *info; |
| 1458 | ULONGEST reg; |
| 1459 | |
| 1460 | if (*this_prologue_cache) |
| 1461 | return *this_prologue_cache; |
| 1462 | |
| 1463 | info = FRAME_OBSTACK_ZALLOC (struct s390_stub_unwind_cache); |
| 1464 | *this_prologue_cache = info; |
| 1465 | info->saved_regs = trad_frame_alloc_saved_regs (this_frame); |
| 1466 | |
| 1467 | /* The return address is in register %r14. */ |
| 1468 | info->saved_regs[S390_PC_REGNUM].realreg = S390_RETADDR_REGNUM; |
| 1469 | |
| 1470 | /* Retrieve stack pointer and determine our frame base. */ |
| 1471 | reg = get_frame_register_unsigned (this_frame, S390_SP_REGNUM); |
| 1472 | info->frame_base = reg + 16*word_size + 32; |
| 1473 | |
| 1474 | return info; |
| 1475 | } |
| 1476 | |
| 1477 | static void |
| 1478 | s390_stub_frame_this_id (struct frame_info *this_frame, |
| 1479 | void **this_prologue_cache, |
| 1480 | struct frame_id *this_id) |
| 1481 | { |
| 1482 | struct s390_stub_unwind_cache *info |
| 1483 | = s390_stub_frame_unwind_cache (this_frame, this_prologue_cache); |
| 1484 | *this_id = frame_id_build (info->frame_base, get_frame_pc (this_frame)); |
| 1485 | } |
| 1486 | |
| 1487 | static struct value * |
| 1488 | s390_stub_frame_prev_register (struct frame_info *this_frame, |
| 1489 | void **this_prologue_cache, int regnum) |
| 1490 | { |
| 1491 | struct s390_stub_unwind_cache *info |
| 1492 | = s390_stub_frame_unwind_cache (this_frame, this_prologue_cache); |
| 1493 | return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum); |
| 1494 | } |
| 1495 | |
| 1496 | static int |
| 1497 | s390_stub_frame_sniffer (const struct frame_unwind *self, |
| 1498 | struct frame_info *this_frame, |
| 1499 | void **this_prologue_cache) |
| 1500 | { |
| 1501 | CORE_ADDR addr_in_block; |
| 1502 | bfd_byte insn[S390_MAX_INSTR_SIZE]; |
| 1503 | |
| 1504 | /* If the current PC points to non-readable memory, we assume we |
| 1505 | have trapped due to an invalid function pointer call. We handle |
| 1506 | the non-existing current function like a PLT stub. */ |
| 1507 | addr_in_block = get_frame_address_in_block (this_frame); |
| 1508 | if (in_plt_section (addr_in_block, NULL) |
| 1509 | || s390_readinstruction (insn, get_frame_pc (this_frame)) < 0) |
| 1510 | return 1; |
| 1511 | return 0; |
| 1512 | } |
| 1513 | |
| 1514 | static const struct frame_unwind s390_stub_frame_unwind = { |
| 1515 | NORMAL_FRAME, |
| 1516 | s390_stub_frame_this_id, |
| 1517 | s390_stub_frame_prev_register, |
| 1518 | NULL, |
| 1519 | s390_stub_frame_sniffer |
| 1520 | }; |
| 1521 | |
| 1522 | |
| 1523 | /* Signal trampoline stack frames. */ |
| 1524 | |
| 1525 | struct s390_sigtramp_unwind_cache { |
| 1526 | CORE_ADDR frame_base; |
| 1527 | struct trad_frame_saved_reg *saved_regs; |
| 1528 | }; |
| 1529 | |
| 1530 | static struct s390_sigtramp_unwind_cache * |
| 1531 | s390_sigtramp_frame_unwind_cache (struct frame_info *this_frame, |
| 1532 | void **this_prologue_cache) |
| 1533 | { |
| 1534 | struct gdbarch *gdbarch = get_frame_arch (this_frame); |
| 1535 | int word_size = gdbarch_ptr_bit (gdbarch) / 8; |
| 1536 | struct s390_sigtramp_unwind_cache *info; |
| 1537 | ULONGEST this_sp, prev_sp; |
| 1538 | CORE_ADDR next_ra, next_cfa, sigreg_ptr; |
| 1539 | int i; |
| 1540 | |
| 1541 | if (*this_prologue_cache) |
| 1542 | return *this_prologue_cache; |
| 1543 | |
| 1544 | info = FRAME_OBSTACK_ZALLOC (struct s390_sigtramp_unwind_cache); |
| 1545 | *this_prologue_cache = info; |
| 1546 | info->saved_regs = trad_frame_alloc_saved_regs (this_frame); |
| 1547 | |
| 1548 | this_sp = get_frame_register_unsigned (this_frame, S390_SP_REGNUM); |
| 1549 | next_ra = get_frame_pc (this_frame); |
| 1550 | next_cfa = this_sp + 16*word_size + 32; |
| 1551 | |
| 1552 | /* New-style RT frame: |
| 1553 | retcode + alignment (8 bytes) |
| 1554 | siginfo (128 bytes) |
| 1555 | ucontext (contains sigregs at offset 5 words) */ |
| 1556 | if (next_ra == next_cfa) |
| 1557 | { |
| 1558 | sigreg_ptr = next_cfa + 8 + 128 + align_up (5*word_size, 8); |
| 1559 | } |
| 1560 | |
| 1561 | /* Old-style RT frame and all non-RT frames: |
| 1562 | old signal mask (8 bytes) |
| 1563 | pointer to sigregs */ |
| 1564 | else |
| 1565 | { |
| 1566 | sigreg_ptr = read_memory_unsigned_integer (next_cfa + 8, word_size); |
| 1567 | } |
| 1568 | |
| 1569 | /* The sigregs structure looks like this: |
| 1570 | long psw_mask; |
| 1571 | long psw_addr; |
| 1572 | long gprs[16]; |
| 1573 | int acrs[16]; |
| 1574 | int fpc; |
| 1575 | int __pad; |
| 1576 | double fprs[16]; */ |
| 1577 | |
| 1578 | /* Let's ignore the PSW mask, it will not be restored anyway. */ |
| 1579 | sigreg_ptr += word_size; |
| 1580 | |
| 1581 | /* Next comes the PSW address. */ |
| 1582 | info->saved_regs[S390_PC_REGNUM].addr = sigreg_ptr; |
| 1583 | sigreg_ptr += word_size; |
| 1584 | |
| 1585 | /* Then the GPRs. */ |
| 1586 | for (i = 0; i < 16; i++) |
| 1587 | { |
| 1588 | info->saved_regs[S390_R0_REGNUM + i].addr = sigreg_ptr; |
| 1589 | sigreg_ptr += word_size; |
| 1590 | } |
| 1591 | |
| 1592 | /* Then the ACRs. */ |
| 1593 | for (i = 0; i < 16; i++) |
| 1594 | { |
| 1595 | info->saved_regs[S390_A0_REGNUM + i].addr = sigreg_ptr; |
| 1596 | sigreg_ptr += 4; |
| 1597 | } |
| 1598 | |
| 1599 | /* The floating-point control word. */ |
| 1600 | info->saved_regs[S390_FPC_REGNUM].addr = sigreg_ptr; |
| 1601 | sigreg_ptr += 8; |
| 1602 | |
| 1603 | /* And finally the FPRs. */ |
| 1604 | for (i = 0; i < 16; i++) |
| 1605 | { |
| 1606 | info->saved_regs[S390_F0_REGNUM + i].addr = sigreg_ptr; |
| 1607 | sigreg_ptr += 8; |
| 1608 | } |
| 1609 | |
| 1610 | /* Restore the previous frame's SP. */ |
| 1611 | prev_sp = read_memory_unsigned_integer ( |
| 1612 | info->saved_regs[S390_SP_REGNUM].addr, |
| 1613 | word_size); |
| 1614 | |
| 1615 | /* Determine our frame base. */ |
| 1616 | info->frame_base = prev_sp + 16*word_size + 32; |
| 1617 | |
| 1618 | return info; |
| 1619 | } |
| 1620 | |
| 1621 | static void |
| 1622 | s390_sigtramp_frame_this_id (struct frame_info *this_frame, |
| 1623 | void **this_prologue_cache, |
| 1624 | struct frame_id *this_id) |
| 1625 | { |
| 1626 | struct s390_sigtramp_unwind_cache *info |
| 1627 | = s390_sigtramp_frame_unwind_cache (this_frame, this_prologue_cache); |
| 1628 | *this_id = frame_id_build (info->frame_base, get_frame_pc (this_frame)); |
| 1629 | } |
| 1630 | |
| 1631 | static struct value * |
| 1632 | s390_sigtramp_frame_prev_register (struct frame_info *this_frame, |
| 1633 | void **this_prologue_cache, int regnum) |
| 1634 | { |
| 1635 | struct s390_sigtramp_unwind_cache *info |
| 1636 | = s390_sigtramp_frame_unwind_cache (this_frame, this_prologue_cache); |
| 1637 | return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum); |
| 1638 | } |
| 1639 | |
| 1640 | static int |
| 1641 | s390_sigtramp_frame_sniffer (const struct frame_unwind *self, |
| 1642 | struct frame_info *this_frame, |
| 1643 | void **this_prologue_cache) |
| 1644 | { |
| 1645 | CORE_ADDR pc = get_frame_pc (this_frame); |
| 1646 | bfd_byte sigreturn[2]; |
| 1647 | |
| 1648 | if (target_read_memory (pc, sigreturn, 2)) |
| 1649 | return 0; |
| 1650 | |
| 1651 | if (sigreturn[0] != 0x0a /* svc */) |
| 1652 | return 0; |
| 1653 | |
| 1654 | if (sigreturn[1] != 119 /* sigreturn */ |
| 1655 | && sigreturn[1] != 173 /* rt_sigreturn */) |
| 1656 | return 0; |
| 1657 | |
| 1658 | return 1; |
| 1659 | } |
| 1660 | |
| 1661 | static const struct frame_unwind s390_sigtramp_frame_unwind = { |
| 1662 | SIGTRAMP_FRAME, |
| 1663 | s390_sigtramp_frame_this_id, |
| 1664 | s390_sigtramp_frame_prev_register, |
| 1665 | NULL, |
| 1666 | s390_sigtramp_frame_sniffer |
| 1667 | }; |
| 1668 | |
| 1669 | |
| 1670 | /* Frame base handling. */ |
| 1671 | |
| 1672 | static CORE_ADDR |
| 1673 | s390_frame_base_address (struct frame_info *this_frame, void **this_cache) |
| 1674 | { |
| 1675 | struct s390_unwind_cache *info |
| 1676 | = s390_frame_unwind_cache (this_frame, this_cache); |
| 1677 | return info->frame_base; |
| 1678 | } |
| 1679 | |
| 1680 | static CORE_ADDR |
| 1681 | s390_local_base_address (struct frame_info *this_frame, void **this_cache) |
| 1682 | { |
| 1683 | struct s390_unwind_cache *info |
| 1684 | = s390_frame_unwind_cache (this_frame, this_cache); |
| 1685 | return info->local_base; |
| 1686 | } |
| 1687 | |
| 1688 | static const struct frame_base s390_frame_base = { |
| 1689 | &s390_frame_unwind, |
| 1690 | s390_frame_base_address, |
| 1691 | s390_local_base_address, |
| 1692 | s390_local_base_address |
| 1693 | }; |
| 1694 | |
| 1695 | static CORE_ADDR |
| 1696 | s390_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame) |
| 1697 | { |
| 1698 | ULONGEST pc; |
| 1699 | pc = frame_unwind_register_unsigned (next_frame, S390_PC_REGNUM); |
| 1700 | return gdbarch_addr_bits_remove (gdbarch, pc); |
| 1701 | } |
| 1702 | |
| 1703 | static CORE_ADDR |
| 1704 | s390_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame) |
| 1705 | { |
| 1706 | ULONGEST sp; |
| 1707 | sp = frame_unwind_register_unsigned (next_frame, S390_SP_REGNUM); |
| 1708 | return gdbarch_addr_bits_remove (gdbarch, sp); |
| 1709 | } |
| 1710 | |
| 1711 | |
| 1712 | /* DWARF-2 frame support. */ |
| 1713 | |
| 1714 | static void |
| 1715 | s390_dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum, |
| 1716 | struct dwarf2_frame_state_reg *reg, |
| 1717 | struct frame_info *this_frame) |
| 1718 | { |
| 1719 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 1720 | |
| 1721 | switch (tdep->abi) |
| 1722 | { |
| 1723 | case ABI_LINUX_S390: |
| 1724 | /* Call-saved registers. */ |
| 1725 | if ((regnum >= S390_R6_REGNUM && regnum <= S390_R15_REGNUM) |
| 1726 | || regnum == S390_F4_REGNUM |
| 1727 | || regnum == S390_F6_REGNUM) |
| 1728 | reg->how = DWARF2_FRAME_REG_SAME_VALUE; |
| 1729 | |
| 1730 | /* Call-clobbered registers. */ |
| 1731 | else if ((regnum >= S390_R0_REGNUM && regnum <= S390_R5_REGNUM) |
| 1732 | || (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM |
| 1733 | && regnum != S390_F4_REGNUM && regnum != S390_F6_REGNUM)) |
| 1734 | reg->how = DWARF2_FRAME_REG_UNDEFINED; |
| 1735 | |
| 1736 | /* The return address column. */ |
| 1737 | else if (regnum == S390_PC_REGNUM) |
| 1738 | reg->how = DWARF2_FRAME_REG_RA; |
| 1739 | break; |
| 1740 | |
| 1741 | case ABI_LINUX_ZSERIES: |
| 1742 | /* Call-saved registers. */ |
| 1743 | if ((regnum >= S390_R6_REGNUM && regnum <= S390_R15_REGNUM) |
| 1744 | || (regnum >= S390_F8_REGNUM && regnum <= S390_F15_REGNUM)) |
| 1745 | reg->how = DWARF2_FRAME_REG_SAME_VALUE; |
| 1746 | |
| 1747 | /* Call-clobbered registers. */ |
| 1748 | else if ((regnum >= S390_R0_REGNUM && regnum <= S390_R5_REGNUM) |
| 1749 | || (regnum >= S390_F0_REGNUM && regnum <= S390_F7_REGNUM)) |
| 1750 | reg->how = DWARF2_FRAME_REG_UNDEFINED; |
| 1751 | |
| 1752 | /* The return address column. */ |
| 1753 | else if (regnum == S390_PC_REGNUM) |
| 1754 | reg->how = DWARF2_FRAME_REG_RA; |
| 1755 | break; |
| 1756 | } |
| 1757 | } |
| 1758 | |
| 1759 | |
| 1760 | /* Dummy function calls. */ |
| 1761 | |
| 1762 | /* Return non-zero if TYPE is an integer-like type, zero otherwise. |
| 1763 | "Integer-like" types are those that should be passed the way |
| 1764 | integers are: integers, enums, ranges, characters, and booleans. */ |
| 1765 | static int |
| 1766 | is_integer_like (struct type *type) |
| 1767 | { |
| 1768 | enum type_code code = TYPE_CODE (type); |
| 1769 | |
| 1770 | return (code == TYPE_CODE_INT |
| 1771 | || code == TYPE_CODE_ENUM |
| 1772 | || code == TYPE_CODE_RANGE |
| 1773 | || code == TYPE_CODE_CHAR |
| 1774 | || code == TYPE_CODE_BOOL); |
| 1775 | } |
| 1776 | |
| 1777 | /* Return non-zero if TYPE is a pointer-like type, zero otherwise. |
| 1778 | "Pointer-like" types are those that should be passed the way |
| 1779 | pointers are: pointers and references. */ |
| 1780 | static int |
| 1781 | is_pointer_like (struct type *type) |
| 1782 | { |
| 1783 | enum type_code code = TYPE_CODE (type); |
| 1784 | |
| 1785 | return (code == TYPE_CODE_PTR |
| 1786 | || code == TYPE_CODE_REF); |
| 1787 | } |
| 1788 | |
| 1789 | |
| 1790 | /* Return non-zero if TYPE is a `float singleton' or `double |
| 1791 | singleton', zero otherwise. |
| 1792 | |
| 1793 | A `T singleton' is a struct type with one member, whose type is |
| 1794 | either T or a `T singleton'. So, the following are all float |
| 1795 | singletons: |
| 1796 | |
| 1797 | struct { float x }; |
| 1798 | struct { struct { float x; } x; }; |
| 1799 | struct { struct { struct { float x; } x; } x; }; |
| 1800 | |
| 1801 | ... and so on. |
| 1802 | |
| 1803 | All such structures are passed as if they were floats or doubles, |
| 1804 | as the (revised) ABI says. */ |
| 1805 | static int |
| 1806 | is_float_singleton (struct type *type) |
| 1807 | { |
| 1808 | if (TYPE_CODE (type) == TYPE_CODE_STRUCT && TYPE_NFIELDS (type) == 1) |
| 1809 | { |
| 1810 | struct type *singleton_type = TYPE_FIELD_TYPE (type, 0); |
| 1811 | CHECK_TYPEDEF (singleton_type); |
| 1812 | |
| 1813 | return (TYPE_CODE (singleton_type) == TYPE_CODE_FLT |
| 1814 | || TYPE_CODE (singleton_type) == TYPE_CODE_DECFLOAT |
| 1815 | || is_float_singleton (singleton_type)); |
| 1816 | } |
| 1817 | |
| 1818 | return 0; |
| 1819 | } |
| 1820 | |
| 1821 | |
| 1822 | /* Return non-zero if TYPE is a struct-like type, zero otherwise. |
| 1823 | "Struct-like" types are those that should be passed as structs are: |
| 1824 | structs and unions. |
| 1825 | |
| 1826 | As an odd quirk, not mentioned in the ABI, GCC passes float and |
| 1827 | double singletons as if they were a plain float, double, etc. (The |
| 1828 | corresponding union types are handled normally.) So we exclude |
| 1829 | those types here. *shrug* */ |
| 1830 | static int |
| 1831 | is_struct_like (struct type *type) |
| 1832 | { |
| 1833 | enum type_code code = TYPE_CODE (type); |
| 1834 | |
| 1835 | return (code == TYPE_CODE_UNION |
| 1836 | || (code == TYPE_CODE_STRUCT && ! is_float_singleton (type))); |
| 1837 | } |
| 1838 | |
| 1839 | |
| 1840 | /* Return non-zero if TYPE is a float-like type, zero otherwise. |
| 1841 | "Float-like" types are those that should be passed as |
| 1842 | floating-point values are. |
| 1843 | |
| 1844 | You'd think this would just be floats, doubles, long doubles, etc. |
| 1845 | But as an odd quirk, not mentioned in the ABI, GCC passes float and |
| 1846 | double singletons as if they were a plain float, double, etc. (The |
| 1847 | corresponding union types are handled normally.) So we include |
| 1848 | those types here. *shrug* */ |
| 1849 | static int |
| 1850 | is_float_like (struct type *type) |
| 1851 | { |
| 1852 | return (TYPE_CODE (type) == TYPE_CODE_FLT |
| 1853 | || TYPE_CODE (type) == TYPE_CODE_DECFLOAT |
| 1854 | || is_float_singleton (type)); |
| 1855 | } |
| 1856 | |
| 1857 | |
| 1858 | static int |
| 1859 | is_power_of_two (unsigned int n) |
| 1860 | { |
| 1861 | return ((n & (n - 1)) == 0); |
| 1862 | } |
| 1863 | |
| 1864 | /* Return non-zero if TYPE should be passed as a pointer to a copy, |
| 1865 | zero otherwise. */ |
| 1866 | static int |
| 1867 | s390_function_arg_pass_by_reference (struct type *type) |
| 1868 | { |
| 1869 | unsigned length = TYPE_LENGTH (type); |
| 1870 | if (length > 8) |
| 1871 | return 1; |
| 1872 | |
| 1873 | /* FIXME: All complex and vector types are also returned by reference. */ |
| 1874 | return is_struct_like (type) && !is_power_of_two (length); |
| 1875 | } |
| 1876 | |
| 1877 | /* Return non-zero if TYPE should be passed in a float register |
| 1878 | if possible. */ |
| 1879 | static int |
| 1880 | s390_function_arg_float (struct type *type) |
| 1881 | { |
| 1882 | unsigned length = TYPE_LENGTH (type); |
| 1883 | if (length > 8) |
| 1884 | return 0; |
| 1885 | |
| 1886 | return is_float_like (type); |
| 1887 | } |
| 1888 | |
| 1889 | /* Return non-zero if TYPE should be passed in an integer register |
| 1890 | (or a pair of integer registers) if possible. */ |
| 1891 | static int |
| 1892 | s390_function_arg_integer (struct type *type) |
| 1893 | { |
| 1894 | unsigned length = TYPE_LENGTH (type); |
| 1895 | if (length > 8) |
| 1896 | return 0; |
| 1897 | |
| 1898 | return is_integer_like (type) |
| 1899 | || is_pointer_like (type) |
| 1900 | || (is_struct_like (type) && is_power_of_two (length)); |
| 1901 | } |
| 1902 | |
| 1903 | /* Return ARG, a `SIMPLE_ARG', sign-extended or zero-extended to a full |
| 1904 | word as required for the ABI. */ |
| 1905 | static LONGEST |
| 1906 | extend_simple_arg (struct value *arg) |
| 1907 | { |
| 1908 | struct type *type = value_type (arg); |
| 1909 | |
| 1910 | /* Even structs get passed in the least significant bits of the |
| 1911 | register / memory word. It's not really right to extract them as |
| 1912 | an integer, but it does take care of the extension. */ |
| 1913 | if (TYPE_UNSIGNED (type)) |
| 1914 | return extract_unsigned_integer (value_contents (arg), |
| 1915 | TYPE_LENGTH (type)); |
| 1916 | else |
| 1917 | return extract_signed_integer (value_contents (arg), |
| 1918 | TYPE_LENGTH (type)); |
| 1919 | } |
| 1920 | |
| 1921 | |
| 1922 | /* Return the alignment required by TYPE. */ |
| 1923 | static int |
| 1924 | alignment_of (struct type *type) |
| 1925 | { |
| 1926 | int alignment; |
| 1927 | |
| 1928 | if (is_integer_like (type) |
| 1929 | || is_pointer_like (type) |
| 1930 | || TYPE_CODE (type) == TYPE_CODE_FLT |
| 1931 | || TYPE_CODE (type) == TYPE_CODE_DECFLOAT) |
| 1932 | alignment = TYPE_LENGTH (type); |
| 1933 | else if (TYPE_CODE (type) == TYPE_CODE_STRUCT |
| 1934 | || TYPE_CODE (type) == TYPE_CODE_UNION) |
| 1935 | { |
| 1936 | int i; |
| 1937 | |
| 1938 | alignment = 1; |
| 1939 | for (i = 0; i < TYPE_NFIELDS (type); i++) |
| 1940 | { |
| 1941 | int field_alignment = alignment_of (TYPE_FIELD_TYPE (type, i)); |
| 1942 | |
| 1943 | if (field_alignment > alignment) |
| 1944 | alignment = field_alignment; |
| 1945 | } |
| 1946 | } |
| 1947 | else |
| 1948 | alignment = 1; |
| 1949 | |
| 1950 | /* Check that everything we ever return is a power of two. Lots of |
| 1951 | code doesn't want to deal with aligning things to arbitrary |
| 1952 | boundaries. */ |
| 1953 | gdb_assert ((alignment & (alignment - 1)) == 0); |
| 1954 | |
| 1955 | return alignment; |
| 1956 | } |
| 1957 | |
| 1958 | |
| 1959 | /* Put the actual parameter values pointed to by ARGS[0..NARGS-1] in |
| 1960 | place to be passed to a function, as specified by the "GNU/Linux |
| 1961 | for S/390 ELF Application Binary Interface Supplement". |
| 1962 | |
| 1963 | SP is the current stack pointer. We must put arguments, links, |
| 1964 | padding, etc. whereever they belong, and return the new stack |
| 1965 | pointer value. |
| 1966 | |
| 1967 | If STRUCT_RETURN is non-zero, then the function we're calling is |
| 1968 | going to return a structure by value; STRUCT_ADDR is the address of |
| 1969 | a block we've allocated for it on the stack. |
| 1970 | |
| 1971 | Our caller has taken care of any type promotions needed to satisfy |
| 1972 | prototypes or the old K&R argument-passing rules. */ |
| 1973 | static CORE_ADDR |
| 1974 | s390_push_dummy_call (struct gdbarch *gdbarch, struct value *function, |
| 1975 | struct regcache *regcache, CORE_ADDR bp_addr, |
| 1976 | int nargs, struct value **args, CORE_ADDR sp, |
| 1977 | int struct_return, CORE_ADDR struct_addr) |
| 1978 | { |
| 1979 | struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); |
| 1980 | int word_size = gdbarch_ptr_bit (gdbarch) / 8; |
| 1981 | ULONGEST orig_sp; |
| 1982 | int i; |
| 1983 | |
| 1984 | /* If the i'th argument is passed as a reference to a copy, then |
| 1985 | copy_addr[i] is the address of the copy we made. */ |
| 1986 | CORE_ADDR *copy_addr = alloca (nargs * sizeof (CORE_ADDR)); |
| 1987 | |
| 1988 | /* Build the reference-to-copy area. */ |
| 1989 | for (i = 0; i < nargs; i++) |
| 1990 | { |
| 1991 | struct value *arg = args[i]; |
| 1992 | struct type *type = value_type (arg); |
| 1993 | unsigned length = TYPE_LENGTH (type); |
| 1994 | |
| 1995 | if (s390_function_arg_pass_by_reference (type)) |
| 1996 | { |
| 1997 | sp -= length; |
| 1998 | sp = align_down (sp, alignment_of (type)); |
| 1999 | write_memory (sp, value_contents (arg), length); |
| 2000 | copy_addr[i] = sp; |
| 2001 | } |
| 2002 | } |
| 2003 | |
| 2004 | /* Reserve space for the parameter area. As a conservative |
| 2005 | simplification, we assume that everything will be passed on the |
| 2006 | stack. Since every argument larger than 8 bytes will be |
| 2007 | passed by reference, we use this simple upper bound. */ |
| 2008 | sp -= nargs * 8; |
| 2009 | |
| 2010 | /* After all that, make sure it's still aligned on an eight-byte |
| 2011 | boundary. */ |
| 2012 | sp = align_down (sp, 8); |
| 2013 | |
| 2014 | /* Finally, place the actual parameters, working from SP towards |
| 2015 | higher addresses. The code above is supposed to reserve enough |
| 2016 | space for this. */ |
| 2017 | { |
| 2018 | int fr = 0; |
| 2019 | int gr = 2; |
| 2020 | CORE_ADDR starg = sp; |
| 2021 | |
| 2022 | /* A struct is returned using general register 2. */ |
| 2023 | if (struct_return) |
| 2024 | { |
| 2025 | regcache_cooked_write_unsigned (regcache, S390_R0_REGNUM + gr, |
| 2026 | struct_addr); |
| 2027 | gr++; |
| 2028 | } |
| 2029 | |
| 2030 | for (i = 0; i < nargs; i++) |
| 2031 | { |
| 2032 | struct value *arg = args[i]; |
| 2033 | struct type *type = value_type (arg); |
| 2034 | unsigned length = TYPE_LENGTH (type); |
| 2035 | |
| 2036 | if (s390_function_arg_pass_by_reference (type)) |
| 2037 | { |
| 2038 | if (gr <= 6) |
| 2039 | { |
| 2040 | regcache_cooked_write_unsigned (regcache, S390_R0_REGNUM + gr, |
| 2041 | copy_addr[i]); |
| 2042 | gr++; |
| 2043 | } |
| 2044 | else |
| 2045 | { |
| 2046 | write_memory_unsigned_integer (starg, word_size, copy_addr[i]); |
| 2047 | starg += word_size; |
| 2048 | } |
| 2049 | } |
| 2050 | else if (s390_function_arg_float (type)) |
| 2051 | { |
| 2052 | /* The GNU/Linux for S/390 ABI uses FPRs 0 and 2 to pass arguments, |
| 2053 | the GNU/Linux for zSeries ABI uses 0, 2, 4, and 6. */ |
| 2054 | if (fr <= (tdep->abi == ABI_LINUX_S390 ? 2 : 6)) |
| 2055 | { |
| 2056 | /* When we store a single-precision value in an FP register, |
| 2057 | it occupies the leftmost bits. */ |
| 2058 | regcache_cooked_write_part (regcache, S390_F0_REGNUM + fr, |
| 2059 | 0, length, value_contents (arg)); |
| 2060 | fr += 2; |
| 2061 | } |
| 2062 | else |
| 2063 | { |
| 2064 | /* When we store a single-precision value in a stack slot, |
| 2065 | it occupies the rightmost bits. */ |
| 2066 | starg = align_up (starg + length, word_size); |
| 2067 | write_memory (starg - length, value_contents (arg), length); |
| 2068 | } |
| 2069 | } |
| 2070 | else if (s390_function_arg_integer (type) && length <= word_size) |
| 2071 | { |
| 2072 | if (gr <= 6) |
| 2073 | { |
| 2074 | /* Integer arguments are always extended to word size. */ |
| 2075 | regcache_cooked_write_signed (regcache, S390_R0_REGNUM + gr, |
| 2076 | extend_simple_arg (arg)); |
| 2077 | gr++; |
| 2078 | } |
| 2079 | else |
| 2080 | { |
| 2081 | /* Integer arguments are always extended to word size. */ |
| 2082 | write_memory_signed_integer (starg, word_size, |
| 2083 | extend_simple_arg (arg)); |
| 2084 | starg += word_size; |
| 2085 | } |
| 2086 | } |
| 2087 | else if (s390_function_arg_integer (type) && length == 2*word_size) |
| 2088 | { |
| 2089 | if (gr <= 5) |
| 2090 | { |
| 2091 | regcache_cooked_write (regcache, S390_R0_REGNUM + gr, |
| 2092 | value_contents (arg)); |
| 2093 | regcache_cooked_write (regcache, S390_R0_REGNUM + gr + 1, |
| 2094 | value_contents (arg) + word_size); |
| 2095 | gr += 2; |
| 2096 | } |
| 2097 | else |
| 2098 | { |
| 2099 | /* If we skipped r6 because we couldn't fit a DOUBLE_ARG |
| 2100 | in it, then don't go back and use it again later. */ |
| 2101 | gr = 7; |
| 2102 | |
| 2103 | write_memory (starg, value_contents (arg), length); |
| 2104 | starg += length; |
| 2105 | } |
| 2106 | } |
| 2107 | else |
| 2108 | internal_error (__FILE__, __LINE__, _("unknown argument type")); |
| 2109 | } |
| 2110 | } |
| 2111 | |
| 2112 | /* Allocate the standard frame areas: the register save area, the |
| 2113 | word reserved for the compiler (which seems kind of meaningless), |
| 2114 | and the back chain pointer. */ |
| 2115 | sp -= 16*word_size + 32; |
| 2116 | |
| 2117 | /* Store return address. */ |
| 2118 | regcache_cooked_write_unsigned (regcache, S390_RETADDR_REGNUM, bp_addr); |
| 2119 | |
| 2120 | /* Store updated stack pointer. */ |
| 2121 | regcache_cooked_write_unsigned (regcache, S390_SP_REGNUM, sp); |
| 2122 | |
| 2123 | /* We need to return the 'stack part' of the frame ID, |
| 2124 | which is actually the top of the register save area. */ |
| 2125 | return sp + 16*word_size + 32; |
| 2126 | } |
| 2127 | |
| 2128 | /* Assuming THIS_FRAME is a dummy, return the frame ID of that |
| 2129 | dummy frame. The frame ID's base needs to match the TOS value |
| 2130 | returned by push_dummy_call, and the PC match the dummy frame's |
| 2131 | breakpoint. */ |
| 2132 | static struct frame_id |
| 2133 | s390_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame) |
| 2134 | { |
| 2135 | int word_size = gdbarch_ptr_bit (gdbarch) / 8; |
| 2136 | CORE_ADDR sp = get_frame_register_unsigned (this_frame, S390_SP_REGNUM); |
| 2137 | sp = gdbarch_addr_bits_remove (gdbarch, sp); |
| 2138 | |
| 2139 | return frame_id_build (sp + 16*word_size + 32, |
| 2140 | get_frame_pc (this_frame)); |
| 2141 | } |
| 2142 | |
| 2143 | static CORE_ADDR |
| 2144 | s390_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr) |
| 2145 | { |
| 2146 | /* Both the 32- and 64-bit ABI's say that the stack pointer should |
| 2147 | always be aligned on an eight-byte boundary. */ |
| 2148 | return (addr & -8); |
| 2149 | } |
| 2150 | |
| 2151 | |
| 2152 | /* Function return value access. */ |
| 2153 | |
| 2154 | static enum return_value_convention |
| 2155 | s390_return_value_convention (struct gdbarch *gdbarch, struct type *type) |
| 2156 | { |
| 2157 | int length = TYPE_LENGTH (type); |
| 2158 | if (length > 8) |
| 2159 | return RETURN_VALUE_STRUCT_CONVENTION; |
| 2160 | |
| 2161 | switch (TYPE_CODE (type)) |
| 2162 | { |
| 2163 | case TYPE_CODE_STRUCT: |
| 2164 | case TYPE_CODE_UNION: |
| 2165 | case TYPE_CODE_ARRAY: |
| 2166 | return RETURN_VALUE_STRUCT_CONVENTION; |
| 2167 | |
| 2168 | default: |
| 2169 | return RETURN_VALUE_REGISTER_CONVENTION; |
| 2170 | } |
| 2171 | } |
| 2172 | |
| 2173 | static enum return_value_convention |
| 2174 | s390_return_value (struct gdbarch *gdbarch, struct type *func_type, |
| 2175 | struct type *type, struct regcache *regcache, |
| 2176 | gdb_byte *out, const gdb_byte *in) |
| 2177 | { |
| 2178 | int word_size = gdbarch_ptr_bit (gdbarch) / 8; |
| 2179 | int length = TYPE_LENGTH (type); |
| 2180 | enum return_value_convention rvc = |
| 2181 | s390_return_value_convention (gdbarch, type); |
| 2182 | if (in) |
| 2183 | { |
| 2184 | switch (rvc) |
| 2185 | { |
| 2186 | case RETURN_VALUE_REGISTER_CONVENTION: |
| 2187 | if (TYPE_CODE (type) == TYPE_CODE_FLT |
| 2188 | || TYPE_CODE (type) == TYPE_CODE_DECFLOAT) |
| 2189 | { |
| 2190 | /* When we store a single-precision value in an FP register, |
| 2191 | it occupies the leftmost bits. */ |
| 2192 | regcache_cooked_write_part (regcache, S390_F0_REGNUM, |
| 2193 | 0, length, in); |
| 2194 | } |
| 2195 | else if (length <= word_size) |
| 2196 | { |
| 2197 | /* Integer arguments are always extended to word size. */ |
| 2198 | if (TYPE_UNSIGNED (type)) |
| 2199 | regcache_cooked_write_unsigned (regcache, S390_R2_REGNUM, |
| 2200 | extract_unsigned_integer (in, length)); |
| 2201 | else |
| 2202 | regcache_cooked_write_signed (regcache, S390_R2_REGNUM, |
| 2203 | extract_signed_integer (in, length)); |
| 2204 | } |
| 2205 | else if (length == 2*word_size) |
| 2206 | { |
| 2207 | regcache_cooked_write (regcache, S390_R2_REGNUM, in); |
| 2208 | regcache_cooked_write (regcache, S390_R3_REGNUM, in + word_size); |
| 2209 | } |
| 2210 | else |
| 2211 | internal_error (__FILE__, __LINE__, _("invalid return type")); |
| 2212 | break; |
| 2213 | |
| 2214 | case RETURN_VALUE_STRUCT_CONVENTION: |
| 2215 | error (_("Cannot set function return value.")); |
| 2216 | break; |
| 2217 | } |
| 2218 | } |
| 2219 | else if (out) |
| 2220 | { |
| 2221 | switch (rvc) |
| 2222 | { |
| 2223 | case RETURN_VALUE_REGISTER_CONVENTION: |
| 2224 | if (TYPE_CODE (type) == TYPE_CODE_FLT |
| 2225 | || TYPE_CODE (type) == TYPE_CODE_DECFLOAT) |
| 2226 | { |
| 2227 | /* When we store a single-precision value in an FP register, |
| 2228 | it occupies the leftmost bits. */ |
| 2229 | regcache_cooked_read_part (regcache, S390_F0_REGNUM, |
| 2230 | 0, length, out); |
| 2231 | } |
| 2232 | else if (length <= word_size) |
| 2233 | { |
| 2234 | /* Integer arguments occupy the rightmost bits. */ |
| 2235 | regcache_cooked_read_part (regcache, S390_R2_REGNUM, |
| 2236 | word_size - length, length, out); |
| 2237 | } |
| 2238 | else if (length == 2*word_size) |
| 2239 | { |
| 2240 | regcache_cooked_read (regcache, S390_R2_REGNUM, out); |
| 2241 | regcache_cooked_read (regcache, S390_R3_REGNUM, out + word_size); |
| 2242 | } |
| 2243 | else |
| 2244 | internal_error (__FILE__, __LINE__, _("invalid return type")); |
| 2245 | break; |
| 2246 | |
| 2247 | case RETURN_VALUE_STRUCT_CONVENTION: |
| 2248 | error (_("Function return value unknown.")); |
| 2249 | break; |
| 2250 | } |
| 2251 | } |
| 2252 | |
| 2253 | return rvc; |
| 2254 | } |
| 2255 | |
| 2256 | |
| 2257 | /* Breakpoints. */ |
| 2258 | |
| 2259 | static const gdb_byte * |
| 2260 | s390_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *lenptr) |
| 2261 | { |
| 2262 | static const gdb_byte breakpoint[] = { 0x0, 0x1 }; |
| 2263 | |
| 2264 | *lenptr = sizeof (breakpoint); |
| 2265 | return breakpoint; |
| 2266 | } |
| 2267 | |
| 2268 | |
| 2269 | /* Address handling. */ |
| 2270 | |
| 2271 | static CORE_ADDR |
| 2272 | s390_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR addr) |
| 2273 | { |
| 2274 | return addr & 0x7fffffff; |
| 2275 | } |
| 2276 | |
| 2277 | static int |
| 2278 | s390_address_class_type_flags (int byte_size, int dwarf2_addr_class) |
| 2279 | { |
| 2280 | if (byte_size == 4) |
| 2281 | return TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1; |
| 2282 | else |
| 2283 | return 0; |
| 2284 | } |
| 2285 | |
| 2286 | static const char * |
| 2287 | s390_address_class_type_flags_to_name (struct gdbarch *gdbarch, int type_flags) |
| 2288 | { |
| 2289 | if (type_flags & TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1) |
| 2290 | return "mode32"; |
| 2291 | else |
| 2292 | return NULL; |
| 2293 | } |
| 2294 | |
| 2295 | static int |
| 2296 | s390_address_class_name_to_type_flags (struct gdbarch *gdbarch, const char *name, |
| 2297 | int *type_flags_ptr) |
| 2298 | { |
| 2299 | if (strcmp (name, "mode32") == 0) |
| 2300 | { |
| 2301 | *type_flags_ptr = TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1; |
| 2302 | return 1; |
| 2303 | } |
| 2304 | else |
| 2305 | return 0; |
| 2306 | } |
| 2307 | |
| 2308 | /* Set up gdbarch struct. */ |
| 2309 | |
| 2310 | static struct gdbarch * |
| 2311 | s390_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) |
| 2312 | { |
| 2313 | struct gdbarch *gdbarch; |
| 2314 | struct gdbarch_tdep *tdep; |
| 2315 | |
| 2316 | /* First see if there is already a gdbarch that can satisfy the request. */ |
| 2317 | arches = gdbarch_list_lookup_by_info (arches, &info); |
| 2318 | if (arches != NULL) |
| 2319 | return arches->gdbarch; |
| 2320 | |
| 2321 | /* None found: is the request for a s390 architecture? */ |
| 2322 | if (info.bfd_arch_info->arch != bfd_arch_s390) |
| 2323 | return NULL; /* No; then it's not for us. */ |
| 2324 | |
| 2325 | /* Yes: create a new gdbarch for the specified machine type. */ |
| 2326 | tdep = XCALLOC (1, struct gdbarch_tdep); |
| 2327 | gdbarch = gdbarch_alloc (&info, tdep); |
| 2328 | |
| 2329 | set_gdbarch_believe_pcc_promotion (gdbarch, 0); |
| 2330 | set_gdbarch_char_signed (gdbarch, 0); |
| 2331 | |
| 2332 | /* S/390 GNU/Linux uses either 64-bit or 128-bit long doubles. |
| 2333 | We can safely let them default to 128-bit, since the debug info |
| 2334 | will give the size of type actually used in each case. */ |
| 2335 | set_gdbarch_long_double_bit (gdbarch, 128); |
| 2336 | set_gdbarch_long_double_format (gdbarch, floatformats_ia64_quad); |
| 2337 | |
| 2338 | /* Amount PC must be decremented by after a breakpoint. This is |
| 2339 | often the number of bytes returned by gdbarch_breakpoint_from_pc but not |
| 2340 | always. */ |
| 2341 | set_gdbarch_decr_pc_after_break (gdbarch, 2); |
| 2342 | /* Stack grows downward. */ |
| 2343 | set_gdbarch_inner_than (gdbarch, core_addr_lessthan); |
| 2344 | set_gdbarch_breakpoint_from_pc (gdbarch, s390_breakpoint_from_pc); |
| 2345 | set_gdbarch_skip_prologue (gdbarch, s390_skip_prologue); |
| 2346 | set_gdbarch_in_function_epilogue_p (gdbarch, s390_in_function_epilogue_p); |
| 2347 | |
| 2348 | set_gdbarch_pc_regnum (gdbarch, S390_PC_REGNUM); |
| 2349 | set_gdbarch_sp_regnum (gdbarch, S390_SP_REGNUM); |
| 2350 | set_gdbarch_fp0_regnum (gdbarch, S390_F0_REGNUM); |
| 2351 | set_gdbarch_num_regs (gdbarch, S390_NUM_REGS); |
| 2352 | set_gdbarch_num_pseudo_regs (gdbarch, S390_NUM_PSEUDO_REGS); |
| 2353 | set_gdbarch_register_name (gdbarch, s390_register_name); |
| 2354 | set_gdbarch_register_type (gdbarch, s390_register_type); |
| 2355 | set_gdbarch_stab_reg_to_regnum (gdbarch, s390_dwarf_reg_to_regnum); |
| 2356 | set_gdbarch_dwarf2_reg_to_regnum (gdbarch, s390_dwarf_reg_to_regnum); |
| 2357 | set_gdbarch_value_from_register (gdbarch, s390_value_from_register); |
| 2358 | set_gdbarch_register_reggroup_p (gdbarch, s390_register_reggroup_p); |
| 2359 | set_gdbarch_regset_from_core_section (gdbarch, |
| 2360 | s390_regset_from_core_section); |
| 2361 | |
| 2362 | /* Inferior function calls. */ |
| 2363 | set_gdbarch_push_dummy_call (gdbarch, s390_push_dummy_call); |
| 2364 | set_gdbarch_dummy_id (gdbarch, s390_dummy_id); |
| 2365 | set_gdbarch_frame_align (gdbarch, s390_frame_align); |
| 2366 | set_gdbarch_return_value (gdbarch, s390_return_value); |
| 2367 | |
| 2368 | /* Frame handling. */ |
| 2369 | dwarf2_frame_set_init_reg (gdbarch, s390_dwarf2_frame_init_reg); |
| 2370 | dwarf2_append_unwinders (gdbarch); |
| 2371 | frame_base_append_sniffer (gdbarch, dwarf2_frame_base_sniffer); |
| 2372 | frame_unwind_append_unwinder (gdbarch, &s390_stub_frame_unwind); |
| 2373 | frame_unwind_append_unwinder (gdbarch, &s390_sigtramp_frame_unwind); |
| 2374 | frame_unwind_append_unwinder (gdbarch, &s390_frame_unwind); |
| 2375 | frame_base_set_default (gdbarch, &s390_frame_base); |
| 2376 | set_gdbarch_unwind_pc (gdbarch, s390_unwind_pc); |
| 2377 | set_gdbarch_unwind_sp (gdbarch, s390_unwind_sp); |
| 2378 | |
| 2379 | switch (info.bfd_arch_info->mach) |
| 2380 | { |
| 2381 | case bfd_mach_s390_31: |
| 2382 | tdep->abi = ABI_LINUX_S390; |
| 2383 | |
| 2384 | tdep->gregset = &s390_gregset; |
| 2385 | tdep->sizeof_gregset = s390_sizeof_gregset; |
| 2386 | tdep->fpregset = &s390_fpregset; |
| 2387 | tdep->sizeof_fpregset = s390_sizeof_fpregset; |
| 2388 | |
| 2389 | set_gdbarch_addr_bits_remove (gdbarch, s390_addr_bits_remove); |
| 2390 | set_gdbarch_pseudo_register_read (gdbarch, s390_pseudo_register_read); |
| 2391 | set_gdbarch_pseudo_register_write (gdbarch, s390_pseudo_register_write); |
| 2392 | set_solib_svr4_fetch_link_map_offsets |
| 2393 | (gdbarch, svr4_ilp32_fetch_link_map_offsets); |
| 2394 | |
| 2395 | break; |
| 2396 | case bfd_mach_s390_64: |
| 2397 | tdep->abi = ABI_LINUX_ZSERIES; |
| 2398 | |
| 2399 | tdep->gregset = &s390x_gregset; |
| 2400 | tdep->sizeof_gregset = s390x_sizeof_gregset; |
| 2401 | tdep->fpregset = &s390_fpregset; |
| 2402 | tdep->sizeof_fpregset = s390_sizeof_fpregset; |
| 2403 | |
| 2404 | set_gdbarch_long_bit (gdbarch, 64); |
| 2405 | set_gdbarch_long_long_bit (gdbarch, 64); |
| 2406 | set_gdbarch_ptr_bit (gdbarch, 64); |
| 2407 | set_gdbarch_pseudo_register_read (gdbarch, s390x_pseudo_register_read); |
| 2408 | set_gdbarch_pseudo_register_write (gdbarch, s390x_pseudo_register_write); |
| 2409 | set_solib_svr4_fetch_link_map_offsets |
| 2410 | (gdbarch, svr4_lp64_fetch_link_map_offsets); |
| 2411 | set_gdbarch_address_class_type_flags (gdbarch, |
| 2412 | s390_address_class_type_flags); |
| 2413 | set_gdbarch_address_class_type_flags_to_name (gdbarch, |
| 2414 | s390_address_class_type_flags_to_name); |
| 2415 | set_gdbarch_address_class_name_to_type_flags (gdbarch, |
| 2416 | s390_address_class_name_to_type_flags); |
| 2417 | break; |
| 2418 | } |
| 2419 | |
| 2420 | set_gdbarch_print_insn (gdbarch, print_insn_s390); |
| 2421 | |
| 2422 | set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target); |
| 2423 | |
| 2424 | /* Enable TLS support. */ |
| 2425 | set_gdbarch_fetch_tls_load_module_address (gdbarch, |
| 2426 | svr4_fetch_objfile_link_map); |
| 2427 | |
| 2428 | return gdbarch; |
| 2429 | } |
| 2430 | |
| 2431 | |
| 2432 | |
| 2433 | extern initialize_file_ftype _initialize_s390_tdep; /* -Wmissing-prototypes */ |
| 2434 | |
| 2435 | void |
| 2436 | _initialize_s390_tdep (void) |
| 2437 | { |
| 2438 | |
| 2439 | /* Hook us into the gdbarch mechanism. */ |
| 2440 | register_gdbarch_init (bfd_arch_s390, s390_gdbarch_init); |
| 2441 | } |