| 1 | /* sh-stub.c -- debugging stub for the Renesas-SH. |
| 2 | |
| 3 | NOTE!! This code has to be compiled with optimization, otherwise the |
| 4 | function inlining which generates the exception handlers won't work. |
| 5 | |
| 6 | */ |
| 7 | |
| 8 | /* This is originally based on an m68k software stub written by Glenn |
| 9 | Engel at HP, but has changed quite a bit. |
| 10 | |
| 11 | Modifications for the SH by Ben Lee and Steve Chamberlain |
| 12 | |
| 13 | */ |
| 14 | |
| 15 | /**************************************************************************** |
| 16 | |
| 17 | THIS SOFTWARE IS NOT COPYRIGHTED |
| 18 | |
| 19 | HP offers the following for use in the public domain. HP makes no |
| 20 | warranty with regard to the software or it's performance and the |
| 21 | user accepts the software "AS IS" with all faults. |
| 22 | |
| 23 | HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD |
| 24 | TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 25 | OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. |
| 26 | |
| 27 | ****************************************************************************/ |
| 28 | |
| 29 | |
| 30 | /* Remote communication protocol. |
| 31 | |
| 32 | A debug packet whose contents are <data> |
| 33 | is encapsulated for transmission in the form: |
| 34 | |
| 35 | $ <data> # CSUM1 CSUM2 |
| 36 | |
| 37 | <data> must be ASCII alphanumeric and cannot include characters |
| 38 | '$' or '#'. If <data> starts with two characters followed by |
| 39 | ':', then the existing stubs interpret this as a sequence number. |
| 40 | |
| 41 | CSUM1 and CSUM2 are ascii hex representation of an 8-bit |
| 42 | checksum of <data>, the most significant nibble is sent first. |
| 43 | the hex digits 0-9,a-f are used. |
| 44 | |
| 45 | Receiver responds with: |
| 46 | |
| 47 | + - if CSUM is correct and ready for next packet |
| 48 | - - if CSUM is incorrect |
| 49 | |
| 50 | <data> is as follows: |
| 51 | All values are encoded in ascii hex digits. |
| 52 | |
| 53 | Request Packet |
| 54 | |
| 55 | read registers g |
| 56 | reply XX....X Each byte of register data |
| 57 | is described by two hex digits. |
| 58 | Registers are in the internal order |
| 59 | for GDB, and the bytes in a register |
| 60 | are in the same order the machine uses. |
| 61 | or ENN for an error. |
| 62 | |
| 63 | write regs GXX..XX Each byte of register data |
| 64 | is described by two hex digits. |
| 65 | reply OK for success |
| 66 | ENN for an error |
| 67 | |
| 68 | write reg Pn...=r... Write register n... with value r..., |
| 69 | which contains two hex digits for each |
| 70 | byte in the register (target byte |
| 71 | order). |
| 72 | reply OK for success |
| 73 | ENN for an error |
| 74 | (not supported by all stubs). |
| 75 | |
| 76 | read mem mAA..AA,LLLL AA..AA is address, LLLL is length. |
| 77 | reply XX..XX XX..XX is mem contents |
| 78 | Can be fewer bytes than requested |
| 79 | if able to read only part of the data. |
| 80 | or ENN NN is errno |
| 81 | |
| 82 | write mem MAA..AA,LLLL:XX..XX |
| 83 | AA..AA is address, |
| 84 | LLLL is number of bytes, |
| 85 | XX..XX is data |
| 86 | reply OK for success |
| 87 | ENN for an error (this includes the case |
| 88 | where only part of the data was |
| 89 | written). |
| 90 | |
| 91 | cont cAA..AA AA..AA is address to resume |
| 92 | If AA..AA is omitted, |
| 93 | resume at same address. |
| 94 | |
| 95 | step sAA..AA AA..AA is address to resume |
| 96 | If AA..AA is omitted, |
| 97 | resume at same address. |
| 98 | |
| 99 | last signal ? Reply the current reason for stopping. |
| 100 | This is the same reply as is generated |
| 101 | for step or cont : SAA where AA is the |
| 102 | signal number. |
| 103 | |
| 104 | There is no immediate reply to step or cont. |
| 105 | The reply comes when the machine stops. |
| 106 | It is SAA AA is the "signal number" |
| 107 | |
| 108 | or... TAAn...:r...;n:r...;n...:r...; |
| 109 | AA = signal number |
| 110 | n... = register number |
| 111 | r... = register contents |
| 112 | or... WAA The process exited, and AA is |
| 113 | the exit status. This is only |
| 114 | applicable for certains sorts of |
| 115 | targets. |
| 116 | kill request k |
| 117 | |
| 118 | toggle debug d toggle debug flag (see 386 & 68k stubs) |
| 119 | reset r reset -- see sparc stub. |
| 120 | reserved <other> On other requests, the stub should |
| 121 | ignore the request and send an empty |
| 122 | response ($#<checksum>). This way |
| 123 | we can extend the protocol and GDB |
| 124 | can tell whether the stub it is |
| 125 | talking to uses the old or the new. |
| 126 | search tAA:PP,MM Search backwards starting at address |
| 127 | AA for a match with pattern PP and |
| 128 | mask MM. PP and MM are 4 bytes. |
| 129 | Not supported by all stubs. |
| 130 | |
| 131 | general query qXXXX Request info about XXXX. |
| 132 | general set QXXXX=yyyy Set value of XXXX to yyyy. |
| 133 | query sect offs qOffsets Get section offsets. Reply is |
| 134 | Text=xxx;Data=yyy;Bss=zzz |
| 135 | console output Otext Send text to stdout. Only comes from |
| 136 | remote target. |
| 137 | |
| 138 | Responses can be run-length encoded to save space. A '*' means that |
| 139 | the next character is an ASCII encoding giving a repeat count which |
| 140 | stands for that many repititions of the character preceding the '*'. |
| 141 | The encoding is n+29, yielding a printable character where n >=3 |
| 142 | (which is where rle starts to win). Don't use an n > 126. |
| 143 | |
| 144 | So |
| 145 | "0* " means the same as "0000". */ |
| 146 | |
| 147 | #include <string.h> |
| 148 | #include <setjmp.h> |
| 149 | |
| 150 | /* Renesas SH architecture instruction encoding masks */ |
| 151 | |
| 152 | #define COND_BR_MASK 0xff00 |
| 153 | #define UCOND_DBR_MASK 0xe000 |
| 154 | #define UCOND_RBR_MASK 0xf0df |
| 155 | #define TRAPA_MASK 0xff00 |
| 156 | |
| 157 | #define COND_DISP 0x00ff |
| 158 | #define UCOND_DISP 0x0fff |
| 159 | #define UCOND_REG 0x0f00 |
| 160 | |
| 161 | /* Renesas SH instruction opcodes */ |
| 162 | |
| 163 | #define BF_INSTR 0x8b00 |
| 164 | #define BT_INSTR 0x8900 |
| 165 | #define BRA_INSTR 0xa000 |
| 166 | #define BSR_INSTR 0xb000 |
| 167 | #define JMP_INSTR 0x402b |
| 168 | #define JSR_INSTR 0x400b |
| 169 | #define RTS_INSTR 0x000b |
| 170 | #define RTE_INSTR 0x002b |
| 171 | #define TRAPA_INSTR 0xc300 |
| 172 | #define SSTEP_INSTR 0xc3ff |
| 173 | |
| 174 | /* Renesas SH processor register masks */ |
| 175 | |
| 176 | #define T_BIT_MASK 0x0001 |
| 177 | |
| 178 | /* |
| 179 | * BUFMAX defines the maximum number of characters in inbound/outbound |
| 180 | * buffers. At least NUMREGBYTES*2 are needed for register packets. |
| 181 | */ |
| 182 | #define BUFMAX 1024 |
| 183 | |
| 184 | /* |
| 185 | * Number of bytes for registers |
| 186 | */ |
| 187 | #define NUMREGBYTES 112 /* 92 */ |
| 188 | |
| 189 | /* |
| 190 | * typedef |
| 191 | */ |
| 192 | typedef void (*Function) (); |
| 193 | |
| 194 | /* |
| 195 | * Forward declarations |
| 196 | */ |
| 197 | |
| 198 | static int hex (char); |
| 199 | static char *mem2hex (char *, char *, int); |
| 200 | static char *hex2mem (char *, char *, int); |
| 201 | static int hexToInt (char **, int *); |
| 202 | static unsigned char *getpacket (void); |
| 203 | static void putpacket (char *); |
| 204 | static void handle_buserror (void); |
| 205 | static int computeSignal (int exceptionVector); |
| 206 | static void handle_exception (int exceptionVector); |
| 207 | void init_serial(); |
| 208 | |
| 209 | void putDebugChar (char); |
| 210 | char getDebugChar (void); |
| 211 | |
| 212 | /* These are in the file but in asm statements so the compiler can't see them */ |
| 213 | void catch_exception_4 (void); |
| 214 | void catch_exception_6 (void); |
| 215 | void catch_exception_9 (void); |
| 216 | void catch_exception_10 (void); |
| 217 | void catch_exception_11 (void); |
| 218 | void catch_exception_32 (void); |
| 219 | void catch_exception_33 (void); |
| 220 | void catch_exception_255 (void); |
| 221 | |
| 222 | |
| 223 | |
| 224 | #define catch_exception_random catch_exception_255 /* Treat all odd ones like 255 */ |
| 225 | |
| 226 | void breakpoint (void); |
| 227 | |
| 228 | |
| 229 | #define init_stack_size 8*1024 /* if you change this you should also modify BINIT */ |
| 230 | #define stub_stack_size 8*1024 |
| 231 | |
| 232 | int init_stack[init_stack_size] __attribute__ ((section ("stack"))) = {0}; |
| 233 | int stub_stack[stub_stack_size] __attribute__ ((section ("stack"))) = {0}; |
| 234 | |
| 235 | |
| 236 | void INIT (); |
| 237 | void BINIT (); |
| 238 | |
| 239 | #define CPU_BUS_ERROR_VEC 9 |
| 240 | #define DMA_BUS_ERROR_VEC 10 |
| 241 | #define NMI_VEC 11 |
| 242 | #define INVALID_INSN_VEC 4 |
| 243 | #define INVALID_SLOT_VEC 6 |
| 244 | #define TRAP_VEC 32 |
| 245 | #define IO_VEC 33 |
| 246 | #define USER_VEC 255 |
| 247 | |
| 248 | |
| 249 | |
| 250 | char in_nmi; /* Set when handling an NMI, so we don't reenter */ |
| 251 | int dofault; /* Non zero, bus errors will raise exception */ |
| 252 | |
| 253 | int *stub_sp; |
| 254 | |
| 255 | /* debug > 0 prints ill-formed commands in valid packets & checksum errors */ |
| 256 | int remote_debug; |
| 257 | |
| 258 | /* jump buffer used for setjmp/longjmp */ |
| 259 | jmp_buf remcomEnv; |
| 260 | |
| 261 | enum regnames |
| 262 | { |
| 263 | R0, R1, R2, R3, R4, R5, R6, R7, |
| 264 | R8, R9, R10, R11, R12, R13, R14, |
| 265 | R15, PC, PR, GBR, VBR, MACH, MACL, SR, |
| 266 | TICKS, STALLS, CYCLES, INSTS, PLR |
| 267 | }; |
| 268 | |
| 269 | typedef struct |
| 270 | { |
| 271 | short *memAddr; |
| 272 | short oldInstr; |
| 273 | } |
| 274 | stepData; |
| 275 | |
| 276 | int registers[NUMREGBYTES / 4]; |
| 277 | stepData instrBuffer; |
| 278 | char stepped; |
| 279 | static const char hexchars[] = "0123456789abcdef"; |
| 280 | static char remcomInBuffer[BUFMAX]; |
| 281 | static char remcomOutBuffer[BUFMAX]; |
| 282 | |
| 283 | char highhex(int x) |
| 284 | { |
| 285 | return hexchars[(x >> 4) & 0xf]; |
| 286 | } |
| 287 | |
| 288 | char lowhex(int x) |
| 289 | { |
| 290 | return hexchars[x & 0xf]; |
| 291 | } |
| 292 | |
| 293 | /* |
| 294 | * Assembly macros |
| 295 | */ |
| 296 | |
| 297 | #define BREAKPOINT() asm("trapa #0x20"::); |
| 298 | |
| 299 | |
| 300 | /* |
| 301 | * Routines to handle hex data |
| 302 | */ |
| 303 | |
| 304 | static int |
| 305 | hex (char ch) |
| 306 | { |
| 307 | if ((ch >= 'a') && (ch <= 'f')) |
| 308 | return (ch - 'a' + 10); |
| 309 | if ((ch >= '0') && (ch <= '9')) |
| 310 | return (ch - '0'); |
| 311 | if ((ch >= 'A') && (ch <= 'F')) |
| 312 | return (ch - 'A' + 10); |
| 313 | return (-1); |
| 314 | } |
| 315 | |
| 316 | /* convert the memory, pointed to by mem into hex, placing result in buf */ |
| 317 | /* return a pointer to the last char put in buf (null) */ |
| 318 | static char * |
| 319 | mem2hex (char *mem, char *buf, int count) |
| 320 | { |
| 321 | int i; |
| 322 | int ch; |
| 323 | for (i = 0; i < count; i++) |
| 324 | { |
| 325 | ch = *mem++; |
| 326 | *buf++ = highhex (ch); |
| 327 | *buf++ = lowhex (ch); |
| 328 | } |
| 329 | *buf = 0; |
| 330 | return (buf); |
| 331 | } |
| 332 | |
| 333 | /* convert the hex array pointed to by buf into binary, to be placed in mem */ |
| 334 | /* return a pointer to the character after the last byte written */ |
| 335 | |
| 336 | static char * |
| 337 | hex2mem (char *buf, char *mem, int count) |
| 338 | { |
| 339 | int i; |
| 340 | unsigned char ch; |
| 341 | for (i = 0; i < count; i++) |
| 342 | { |
| 343 | ch = hex (*buf++) << 4; |
| 344 | ch = ch + hex (*buf++); |
| 345 | *mem++ = ch; |
| 346 | } |
| 347 | return (mem); |
| 348 | } |
| 349 | |
| 350 | /**********************************************/ |
| 351 | /* WHILE WE FIND NICE HEX CHARS, BUILD AN INT */ |
| 352 | /* RETURN NUMBER OF CHARS PROCESSED */ |
| 353 | /**********************************************/ |
| 354 | static int |
| 355 | hexToInt (char **ptr, int *intValue) |
| 356 | { |
| 357 | int numChars = 0; |
| 358 | int hexValue; |
| 359 | |
| 360 | *intValue = 0; |
| 361 | |
| 362 | while (**ptr) |
| 363 | { |
| 364 | hexValue = hex (**ptr); |
| 365 | if (hexValue >= 0) |
| 366 | { |
| 367 | *intValue = (*intValue << 4) | hexValue; |
| 368 | numChars++; |
| 369 | } |
| 370 | else |
| 371 | break; |
| 372 | |
| 373 | (*ptr)++; |
| 374 | } |
| 375 | |
| 376 | return (numChars); |
| 377 | } |
| 378 | |
| 379 | /* |
| 380 | * Routines to get and put packets |
| 381 | */ |
| 382 | |
| 383 | /* scan for the sequence $<data>#<checksum> */ |
| 384 | |
| 385 | char * |
| 386 | getpacket (void) |
| 387 | { |
| 388 | unsigned char *buffer = &remcomInBuffer[0]; |
| 389 | unsigned char checksum; |
| 390 | unsigned char xmitcsum; |
| 391 | int count; |
| 392 | char ch; |
| 393 | |
| 394 | while (1) |
| 395 | { |
| 396 | /* wait around for the start character, ignore all other characters */ |
| 397 | while ((ch = getDebugChar ()) != '$') |
| 398 | ; |
| 399 | |
| 400 | retry: |
| 401 | checksum = 0; |
| 402 | xmitcsum = -1; |
| 403 | count = 0; |
| 404 | |
| 405 | /* now, read until a # or end of buffer is found */ |
| 406 | while (count < BUFMAX - 1) |
| 407 | { |
| 408 | ch = getDebugChar (); |
| 409 | if (ch == '$') |
| 410 | goto retry; |
| 411 | if (ch == '#') |
| 412 | break; |
| 413 | checksum = checksum + ch; |
| 414 | buffer[count] = ch; |
| 415 | count = count + 1; |
| 416 | } |
| 417 | buffer[count] = 0; |
| 418 | |
| 419 | if (ch == '#') |
| 420 | { |
| 421 | ch = getDebugChar (); |
| 422 | xmitcsum = hex (ch) << 4; |
| 423 | ch = getDebugChar (); |
| 424 | xmitcsum += hex (ch); |
| 425 | |
| 426 | if (checksum != xmitcsum) |
| 427 | { |
| 428 | putDebugChar ('-'); /* failed checksum */ |
| 429 | } |
| 430 | else |
| 431 | { |
| 432 | putDebugChar ('+'); /* successful transfer */ |
| 433 | |
| 434 | /* if a sequence char is present, reply the sequence ID */ |
| 435 | if (buffer[2] == ':') |
| 436 | { |
| 437 | putDebugChar (buffer[0]); |
| 438 | putDebugChar (buffer[1]); |
| 439 | |
| 440 | return &buffer[3]; |
| 441 | } |
| 442 | |
| 443 | return &buffer[0]; |
| 444 | } |
| 445 | } |
| 446 | } |
| 447 | } |
| 448 | |
| 449 | |
| 450 | /* send the packet in buffer. */ |
| 451 | |
| 452 | static void |
| 453 | putpacket (char *buffer) |
| 454 | { |
| 455 | int checksum; |
| 456 | int count; |
| 457 | |
| 458 | /* $<packet info>#<checksum>. */ |
| 459 | do |
| 460 | { |
| 461 | char *src = buffer; |
| 462 | putDebugChar ('$'); |
| 463 | checksum = 0; |
| 464 | |
| 465 | while (*src) |
| 466 | { |
| 467 | int runlen; |
| 468 | |
| 469 | /* Do run length encoding */ |
| 470 | for (runlen = 0; runlen < 100; runlen ++) |
| 471 | { |
| 472 | if (src[0] != src[runlen]) |
| 473 | { |
| 474 | if (runlen > 3) |
| 475 | { |
| 476 | int encode; |
| 477 | /* Got a useful amount */ |
| 478 | putDebugChar (*src); |
| 479 | checksum += *src; |
| 480 | putDebugChar ('*'); |
| 481 | checksum += '*'; |
| 482 | checksum += (encode = runlen + ' ' - 4); |
| 483 | putDebugChar (encode); |
| 484 | src += runlen; |
| 485 | } |
| 486 | else |
| 487 | { |
| 488 | putDebugChar (*src); |
| 489 | checksum += *src; |
| 490 | src++; |
| 491 | } |
| 492 | break; |
| 493 | } |
| 494 | } |
| 495 | } |
| 496 | |
| 497 | |
| 498 | putDebugChar ('#'); |
| 499 | putDebugChar (highhex(checksum)); |
| 500 | putDebugChar (lowhex(checksum)); |
| 501 | } |
| 502 | while (getDebugChar() != '+'); |
| 503 | } |
| 504 | |
| 505 | |
| 506 | /* a bus error has occurred, perform a longjmp |
| 507 | to return execution and allow handling of the error */ |
| 508 | |
| 509 | void |
| 510 | handle_buserror (void) |
| 511 | { |
| 512 | longjmp (remcomEnv, 1); |
| 513 | } |
| 514 | |
| 515 | /* |
| 516 | * this function takes the SH-1 exception number and attempts to |
| 517 | * translate this number into a unix compatible signal value |
| 518 | */ |
| 519 | static int |
| 520 | computeSignal (int exceptionVector) |
| 521 | { |
| 522 | int sigval; |
| 523 | switch (exceptionVector) |
| 524 | { |
| 525 | case INVALID_INSN_VEC: |
| 526 | sigval = 4; |
| 527 | break; |
| 528 | case INVALID_SLOT_VEC: |
| 529 | sigval = 4; |
| 530 | break; |
| 531 | case CPU_BUS_ERROR_VEC: |
| 532 | sigval = 10; |
| 533 | break; |
| 534 | case DMA_BUS_ERROR_VEC: |
| 535 | sigval = 10; |
| 536 | break; |
| 537 | case NMI_VEC: |
| 538 | sigval = 2; |
| 539 | break; |
| 540 | |
| 541 | case TRAP_VEC: |
| 542 | case USER_VEC: |
| 543 | sigval = 5; |
| 544 | break; |
| 545 | |
| 546 | default: |
| 547 | sigval = 7; /* "software generated"*/ |
| 548 | break; |
| 549 | } |
| 550 | return (sigval); |
| 551 | } |
| 552 | |
| 553 | void |
| 554 | doSStep (void) |
| 555 | { |
| 556 | short *instrMem; |
| 557 | int displacement; |
| 558 | int reg; |
| 559 | unsigned short opcode; |
| 560 | |
| 561 | instrMem = (short *) registers[PC]; |
| 562 | |
| 563 | opcode = *instrMem; |
| 564 | stepped = 1; |
| 565 | |
| 566 | if ((opcode & COND_BR_MASK) == BT_INSTR) |
| 567 | { |
| 568 | if (registers[SR] & T_BIT_MASK) |
| 569 | { |
| 570 | displacement = (opcode & COND_DISP) << 1; |
| 571 | if (displacement & 0x80) |
| 572 | displacement |= 0xffffff00; |
| 573 | /* |
| 574 | * Remember PC points to second instr. |
| 575 | * after PC of branch ... so add 4 |
| 576 | */ |
| 577 | instrMem = (short *) (registers[PC] + displacement + 4); |
| 578 | } |
| 579 | else |
| 580 | instrMem += 1; |
| 581 | } |
| 582 | else if ((opcode & COND_BR_MASK) == BF_INSTR) |
| 583 | { |
| 584 | if (registers[SR] & T_BIT_MASK) |
| 585 | instrMem += 1; |
| 586 | else |
| 587 | { |
| 588 | displacement = (opcode & COND_DISP) << 1; |
| 589 | if (displacement & 0x80) |
| 590 | displacement |= 0xffffff00; |
| 591 | /* |
| 592 | * Remember PC points to second instr. |
| 593 | * after PC of branch ... so add 4 |
| 594 | */ |
| 595 | instrMem = (short *) (registers[PC] + displacement + 4); |
| 596 | } |
| 597 | } |
| 598 | else if ((opcode & UCOND_DBR_MASK) == BRA_INSTR) |
| 599 | { |
| 600 | displacement = (opcode & UCOND_DISP) << 1; |
| 601 | if (displacement & 0x0800) |
| 602 | displacement |= 0xfffff000; |
| 603 | |
| 604 | /* |
| 605 | * Remember PC points to second instr. |
| 606 | * after PC of branch ... so add 4 |
| 607 | */ |
| 608 | instrMem = (short *) (registers[PC] + displacement + 4); |
| 609 | } |
| 610 | else if ((opcode & UCOND_RBR_MASK) == JSR_INSTR) |
| 611 | { |
| 612 | reg = (char) ((opcode & UCOND_REG) >> 8); |
| 613 | |
| 614 | instrMem = (short *) registers[reg]; |
| 615 | } |
| 616 | else if (opcode == RTS_INSTR) |
| 617 | instrMem = (short *) registers[PR]; |
| 618 | else if (opcode == RTE_INSTR) |
| 619 | instrMem = (short *) registers[15]; |
| 620 | else if ((opcode & TRAPA_MASK) == TRAPA_INSTR) |
| 621 | instrMem = (short *) ((opcode & ~TRAPA_MASK) << 2); |
| 622 | else |
| 623 | instrMem += 1; |
| 624 | |
| 625 | instrBuffer.memAddr = instrMem; |
| 626 | instrBuffer.oldInstr = *instrMem; |
| 627 | *instrMem = SSTEP_INSTR; |
| 628 | } |
| 629 | |
| 630 | |
| 631 | /* Undo the effect of a previous doSStep. If we single stepped, |
| 632 | restore the old instruction. */ |
| 633 | |
| 634 | void |
| 635 | undoSStep (void) |
| 636 | { |
| 637 | if (stepped) |
| 638 | { short *instrMem; |
| 639 | instrMem = instrBuffer.memAddr; |
| 640 | *instrMem = instrBuffer.oldInstr; |
| 641 | } |
| 642 | stepped = 0; |
| 643 | } |
| 644 | |
| 645 | /* |
| 646 | This function does all exception handling. It only does two things - |
| 647 | it figures out why it was called and tells gdb, and then it reacts |
| 648 | to gdb's requests. |
| 649 | |
| 650 | When in the monitor mode we talk a human on the serial line rather than gdb. |
| 651 | |
| 652 | */ |
| 653 | |
| 654 | |
| 655 | void |
| 656 | gdb_handle_exception (int exceptionVector) |
| 657 | { |
| 658 | int sigval, stepping; |
| 659 | int addr, length; |
| 660 | char *ptr; |
| 661 | |
| 662 | /* reply to host that an exception has occurred */ |
| 663 | sigval = computeSignal (exceptionVector); |
| 664 | remcomOutBuffer[0] = 'S'; |
| 665 | remcomOutBuffer[1] = highhex(sigval); |
| 666 | remcomOutBuffer[2] = lowhex (sigval); |
| 667 | remcomOutBuffer[3] = 0; |
| 668 | |
| 669 | putpacket (remcomOutBuffer); |
| 670 | |
| 671 | /* |
| 672 | * exception 255 indicates a software trap |
| 673 | * inserted in place of code ... so back up |
| 674 | * PC by one instruction, since this instruction |
| 675 | * will later be replaced by its original one! |
| 676 | */ |
| 677 | if (exceptionVector == 0xff |
| 678 | || exceptionVector == 0x20) |
| 679 | registers[PC] -= 2; |
| 680 | |
| 681 | /* |
| 682 | * Do the thangs needed to undo |
| 683 | * any stepping we may have done! |
| 684 | */ |
| 685 | undoSStep (); |
| 686 | |
| 687 | stepping = 0; |
| 688 | |
| 689 | while (1) |
| 690 | { |
| 691 | remcomOutBuffer[0] = 0; |
| 692 | ptr = getpacket (); |
| 693 | |
| 694 | switch (*ptr++) |
| 695 | { |
| 696 | case '?': |
| 697 | remcomOutBuffer[0] = 'S'; |
| 698 | remcomOutBuffer[1] = highhex (sigval); |
| 699 | remcomOutBuffer[2] = lowhex (sigval); |
| 700 | remcomOutBuffer[3] = 0; |
| 701 | break; |
| 702 | case 'd': |
| 703 | remote_debug = !(remote_debug); /* toggle debug flag */ |
| 704 | break; |
| 705 | case 'g': /* return the value of the CPU registers */ |
| 706 | mem2hex ((char *) registers, remcomOutBuffer, NUMREGBYTES); |
| 707 | break; |
| 708 | case 'G': /* set the value of the CPU registers - return OK */ |
| 709 | hex2mem (ptr, (char *) registers, NUMREGBYTES); |
| 710 | strcpy (remcomOutBuffer, "OK"); |
| 711 | break; |
| 712 | |
| 713 | /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */ |
| 714 | case 'm': |
| 715 | if (setjmp (remcomEnv) == 0) |
| 716 | { |
| 717 | dofault = 0; |
| 718 | /* TRY, TO READ %x,%x. IF SUCCEED, SET PTR = 0 */ |
| 719 | if (hexToInt (&ptr, &addr)) |
| 720 | if (*(ptr++) == ',') |
| 721 | if (hexToInt (&ptr, &length)) |
| 722 | { |
| 723 | ptr = 0; |
| 724 | mem2hex ((char *) addr, remcomOutBuffer, length); |
| 725 | } |
| 726 | if (ptr) |
| 727 | strcpy (remcomOutBuffer, "E01"); |
| 728 | } |
| 729 | else |
| 730 | strcpy (remcomOutBuffer, "E03"); |
| 731 | |
| 732 | /* restore handler for bus error */ |
| 733 | dofault = 1; |
| 734 | break; |
| 735 | |
| 736 | /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */ |
| 737 | case 'M': |
| 738 | if (setjmp (remcomEnv) == 0) |
| 739 | { |
| 740 | dofault = 0; |
| 741 | |
| 742 | /* TRY, TO READ '%x,%x:'. IF SUCCEED, SET PTR = 0 */ |
| 743 | if (hexToInt (&ptr, &addr)) |
| 744 | if (*(ptr++) == ',') |
| 745 | if (hexToInt (&ptr, &length)) |
| 746 | if (*(ptr++) == ':') |
| 747 | { |
| 748 | hex2mem (ptr, (char *) addr, length); |
| 749 | ptr = 0; |
| 750 | strcpy (remcomOutBuffer, "OK"); |
| 751 | } |
| 752 | if (ptr) |
| 753 | strcpy (remcomOutBuffer, "E02"); |
| 754 | } |
| 755 | else |
| 756 | strcpy (remcomOutBuffer, "E03"); |
| 757 | |
| 758 | /* restore handler for bus error */ |
| 759 | dofault = 1; |
| 760 | break; |
| 761 | |
| 762 | /* cAA..AA Continue at address AA..AA(optional) */ |
| 763 | /* sAA..AA Step one instruction from AA..AA(optional) */ |
| 764 | case 's': |
| 765 | stepping = 1; |
| 766 | case 'c': |
| 767 | { |
| 768 | /* tRY, to read optional parameter, pc unchanged if no parm */ |
| 769 | if (hexToInt (&ptr, &addr)) |
| 770 | registers[PC] = addr; |
| 771 | |
| 772 | if (stepping) |
| 773 | doSStep (); |
| 774 | } |
| 775 | return; |
| 776 | break; |
| 777 | |
| 778 | /* kill the program */ |
| 779 | case 'k': /* do nothing */ |
| 780 | break; |
| 781 | } /* switch */ |
| 782 | |
| 783 | /* reply to the request */ |
| 784 | putpacket (remcomOutBuffer); |
| 785 | } |
| 786 | } |
| 787 | |
| 788 | |
| 789 | #define GDBCOOKIE 0x5ac |
| 790 | static int ingdbmode; |
| 791 | /* We've had an exception - choose to go into the monitor or |
| 792 | the gdb stub */ |
| 793 | void handle_exception(int exceptionVector) |
| 794 | { |
| 795 | #ifdef MONITOR |
| 796 | if (ingdbmode != GDBCOOKIE) |
| 797 | monitor_handle_exception (exceptionVector); |
| 798 | else |
| 799 | #endif |
| 800 | gdb_handle_exception (exceptionVector); |
| 801 | |
| 802 | } |
| 803 | |
| 804 | void |
| 805 | gdb_mode (void) |
| 806 | { |
| 807 | ingdbmode = GDBCOOKIE; |
| 808 | breakpoint(); |
| 809 | } |
| 810 | /* This function will generate a breakpoint exception. It is used at the |
| 811 | beginning of a program to sync up with a debugger and can be used |
| 812 | otherwise as a quick means to stop program execution and "break" into |
| 813 | the debugger. */ |
| 814 | |
| 815 | void |
| 816 | breakpoint (void) |
| 817 | { |
| 818 | BREAKPOINT (); |
| 819 | } |
| 820 | |
| 821 | /**** Processor-specific routines start here ****/ |
| 822 | /**** Processor-specific routines start here ****/ |
| 823 | /**** Processor-specific routines start here ****/ |
| 824 | |
| 825 | /* Note: |
| 826 | |
| 827 | The Renesas SH family uses two exception architectures: |
| 828 | |
| 829 | SH1 & SH2: |
| 830 | |
| 831 | These processors utilize an exception vector table. |
| 832 | Exceptions are vectored to the address stored at VBR + (exception_num * 4) |
| 833 | |
| 834 | SH3, SH3E, & SH4: |
| 835 | |
| 836 | These processors have fixed entry points relative to the VBR for |
| 837 | various exception classes. |
| 838 | */ |
| 839 | |
| 840 | #if defined(__sh1__) || defined(__sh2__) |
| 841 | |
| 842 | /* SH1/SH2 exception vector table format */ |
| 843 | |
| 844 | typedef struct |
| 845 | { |
| 846 | void (*func_cold) (); |
| 847 | int *stack_cold; |
| 848 | void (*func_warm) (); |
| 849 | int *stack_warm; |
| 850 | void (*(handler[256 - 4])) (); |
| 851 | } |
| 852 | vec_type; |
| 853 | |
| 854 | /* vectable is the SH1/SH2 vector table. It must be at address 0 |
| 855 | or wherever your vbr points. */ |
| 856 | |
| 857 | const vec_type vectable = |
| 858 | { |
| 859 | &BINIT, /* 0: Power-on reset PC */ |
| 860 | init_stack + init_stack_size, /* 1: Power-on reset SP */ |
| 861 | &BINIT, /* 2: Manual reset PC */ |
| 862 | init_stack + init_stack_size, /* 3: Manual reset SP */ |
| 863 | { |
| 864 | &catch_exception_4, /* 4: General invalid instruction */ |
| 865 | &catch_exception_random, /* 5: Reserved for system */ |
| 866 | &catch_exception_6, /* 6: Invalid slot instruction */ |
| 867 | &catch_exception_random, /* 7: Reserved for system */ |
| 868 | &catch_exception_random, /* 8: Reserved for system */ |
| 869 | &catch_exception_9, /* 9: CPU bus error */ |
| 870 | &catch_exception_10, /* 10: DMA bus error */ |
| 871 | &catch_exception_11, /* 11: NMI */ |
| 872 | &catch_exception_random, /* 12: User break */ |
| 873 | &catch_exception_random, /* 13: Reserved for system */ |
| 874 | &catch_exception_random, /* 14: Reserved for system */ |
| 875 | &catch_exception_random, /* 15: Reserved for system */ |
| 876 | &catch_exception_random, /* 16: Reserved for system */ |
| 877 | &catch_exception_random, /* 17: Reserved for system */ |
| 878 | &catch_exception_random, /* 18: Reserved for system */ |
| 879 | &catch_exception_random, /* 19: Reserved for system */ |
| 880 | &catch_exception_random, /* 20: Reserved for system */ |
| 881 | &catch_exception_random, /* 21: Reserved for system */ |
| 882 | &catch_exception_random, /* 22: Reserved for system */ |
| 883 | &catch_exception_random, /* 23: Reserved for system */ |
| 884 | &catch_exception_random, /* 24: Reserved for system */ |
| 885 | &catch_exception_random, /* 25: Reserved for system */ |
| 886 | &catch_exception_random, /* 26: Reserved for system */ |
| 887 | &catch_exception_random, /* 27: Reserved for system */ |
| 888 | &catch_exception_random, /* 28: Reserved for system */ |
| 889 | &catch_exception_random, /* 29: Reserved for system */ |
| 890 | &catch_exception_random, /* 30: Reserved for system */ |
| 891 | &catch_exception_random, /* 31: Reserved for system */ |
| 892 | &catch_exception_32, /* 32: Trap instr (user vectors) */ |
| 893 | &catch_exception_33, /* 33: Trap instr (user vectors) */ |
| 894 | &catch_exception_random, /* 34: Trap instr (user vectors) */ |
| 895 | &catch_exception_random, /* 35: Trap instr (user vectors) */ |
| 896 | &catch_exception_random, /* 36: Trap instr (user vectors) */ |
| 897 | &catch_exception_random, /* 37: Trap instr (user vectors) */ |
| 898 | &catch_exception_random, /* 38: Trap instr (user vectors) */ |
| 899 | &catch_exception_random, /* 39: Trap instr (user vectors) */ |
| 900 | &catch_exception_random, /* 40: Trap instr (user vectors) */ |
| 901 | &catch_exception_random, /* 41: Trap instr (user vectors) */ |
| 902 | &catch_exception_random, /* 42: Trap instr (user vectors) */ |
| 903 | &catch_exception_random, /* 43: Trap instr (user vectors) */ |
| 904 | &catch_exception_random, /* 44: Trap instr (user vectors) */ |
| 905 | &catch_exception_random, /* 45: Trap instr (user vectors) */ |
| 906 | &catch_exception_random, /* 46: Trap instr (user vectors) */ |
| 907 | &catch_exception_random, /* 47: Trap instr (user vectors) */ |
| 908 | &catch_exception_random, /* 48: Trap instr (user vectors) */ |
| 909 | &catch_exception_random, /* 49: Trap instr (user vectors) */ |
| 910 | &catch_exception_random, /* 50: Trap instr (user vectors) */ |
| 911 | &catch_exception_random, /* 51: Trap instr (user vectors) */ |
| 912 | &catch_exception_random, /* 52: Trap instr (user vectors) */ |
| 913 | &catch_exception_random, /* 53: Trap instr (user vectors) */ |
| 914 | &catch_exception_random, /* 54: Trap instr (user vectors) */ |
| 915 | &catch_exception_random, /* 55: Trap instr (user vectors) */ |
| 916 | &catch_exception_random, /* 56: Trap instr (user vectors) */ |
| 917 | &catch_exception_random, /* 57: Trap instr (user vectors) */ |
| 918 | &catch_exception_random, /* 58: Trap instr (user vectors) */ |
| 919 | &catch_exception_random, /* 59: Trap instr (user vectors) */ |
| 920 | &catch_exception_random, /* 60: Trap instr (user vectors) */ |
| 921 | &catch_exception_random, /* 61: Trap instr (user vectors) */ |
| 922 | &catch_exception_random, /* 62: Trap instr (user vectors) */ |
| 923 | &catch_exception_random, /* 63: Trap instr (user vectors) */ |
| 924 | &catch_exception_random, /* 64: IRQ0 */ |
| 925 | &catch_exception_random, /* 65: IRQ1 */ |
| 926 | &catch_exception_random, /* 66: IRQ2 */ |
| 927 | &catch_exception_random, /* 67: IRQ3 */ |
| 928 | &catch_exception_random, /* 68: IRQ4 */ |
| 929 | &catch_exception_random, /* 69: IRQ5 */ |
| 930 | &catch_exception_random, /* 70: IRQ6 */ |
| 931 | &catch_exception_random, /* 71: IRQ7 */ |
| 932 | &catch_exception_random, |
| 933 | &catch_exception_random, |
| 934 | &catch_exception_random, |
| 935 | &catch_exception_random, |
| 936 | &catch_exception_random, |
| 937 | &catch_exception_random, |
| 938 | &catch_exception_random, |
| 939 | &catch_exception_random, |
| 940 | &catch_exception_random, |
| 941 | &catch_exception_random, |
| 942 | &catch_exception_random, |
| 943 | &catch_exception_random, |
| 944 | &catch_exception_random, |
| 945 | &catch_exception_random, |
| 946 | &catch_exception_random, |
| 947 | &catch_exception_random, |
| 948 | &catch_exception_random, |
| 949 | &catch_exception_random, |
| 950 | &catch_exception_random, |
| 951 | &catch_exception_random, |
| 952 | &catch_exception_random, |
| 953 | &catch_exception_random, |
| 954 | &catch_exception_random, |
| 955 | &catch_exception_random, |
| 956 | &catch_exception_random, |
| 957 | &catch_exception_random, |
| 958 | &catch_exception_random, |
| 959 | &catch_exception_random, |
| 960 | &catch_exception_random, |
| 961 | &catch_exception_random, |
| 962 | &catch_exception_random, |
| 963 | &catch_exception_random, |
| 964 | &catch_exception_random, |
| 965 | &catch_exception_random, |
| 966 | &catch_exception_random, |
| 967 | &catch_exception_random, |
| 968 | &catch_exception_random, |
| 969 | &catch_exception_random, |
| 970 | &catch_exception_random, |
| 971 | &catch_exception_random, |
| 972 | &catch_exception_random, |
| 973 | &catch_exception_random, |
| 974 | &catch_exception_random, |
| 975 | &catch_exception_random, |
| 976 | &catch_exception_random, |
| 977 | &catch_exception_random, |
| 978 | &catch_exception_random, |
| 979 | &catch_exception_random, |
| 980 | &catch_exception_random, |
| 981 | &catch_exception_random, |
| 982 | &catch_exception_random, |
| 983 | &catch_exception_random, |
| 984 | &catch_exception_random, |
| 985 | &catch_exception_random, |
| 986 | &catch_exception_random, |
| 987 | &catch_exception_random, |
| 988 | &catch_exception_random, |
| 989 | &catch_exception_random, |
| 990 | &catch_exception_random, |
| 991 | &catch_exception_random, |
| 992 | &catch_exception_random, |
| 993 | &catch_exception_random, |
| 994 | &catch_exception_random, |
| 995 | &catch_exception_random, |
| 996 | &catch_exception_random, |
| 997 | &catch_exception_random, |
| 998 | &catch_exception_random, |
| 999 | &catch_exception_random, |
| 1000 | &catch_exception_random, |
| 1001 | &catch_exception_random, |
| 1002 | &catch_exception_random, |
| 1003 | &catch_exception_random, |
| 1004 | &catch_exception_random, |
| 1005 | &catch_exception_random, |
| 1006 | &catch_exception_random, |
| 1007 | &catch_exception_random, |
| 1008 | &catch_exception_random, |
| 1009 | &catch_exception_random, |
| 1010 | &catch_exception_random, |
| 1011 | &catch_exception_random, |
| 1012 | &catch_exception_random, |
| 1013 | &catch_exception_random, |
| 1014 | &catch_exception_random, |
| 1015 | &catch_exception_random, |
| 1016 | &catch_exception_random, |
| 1017 | &catch_exception_random, |
| 1018 | &catch_exception_random, |
| 1019 | &catch_exception_random, |
| 1020 | &catch_exception_random, |
| 1021 | &catch_exception_random, |
| 1022 | &catch_exception_random, |
| 1023 | &catch_exception_random, |
| 1024 | &catch_exception_random, |
| 1025 | &catch_exception_random, |
| 1026 | &catch_exception_random, |
| 1027 | &catch_exception_random, |
| 1028 | &catch_exception_random, |
| 1029 | &catch_exception_random, |
| 1030 | &catch_exception_random, |
| 1031 | &catch_exception_random, |
| 1032 | &catch_exception_random, |
| 1033 | &catch_exception_random, |
| 1034 | &catch_exception_random, |
| 1035 | &catch_exception_random, |
| 1036 | &catch_exception_random, |
| 1037 | &catch_exception_random, |
| 1038 | &catch_exception_random, |
| 1039 | &catch_exception_random, |
| 1040 | &catch_exception_random, |
| 1041 | &catch_exception_random, |
| 1042 | &catch_exception_random, |
| 1043 | &catch_exception_random, |
| 1044 | &catch_exception_random, |
| 1045 | &catch_exception_random, |
| 1046 | &catch_exception_random, |
| 1047 | &catch_exception_random, |
| 1048 | &catch_exception_random, |
| 1049 | &catch_exception_random, |
| 1050 | &catch_exception_random, |
| 1051 | &catch_exception_random, |
| 1052 | &catch_exception_random, |
| 1053 | &catch_exception_random, |
| 1054 | &catch_exception_random, |
| 1055 | &catch_exception_random, |
| 1056 | &catch_exception_random, |
| 1057 | &catch_exception_random, |
| 1058 | &catch_exception_random, |
| 1059 | &catch_exception_random, |
| 1060 | &catch_exception_random, |
| 1061 | &catch_exception_random, |
| 1062 | &catch_exception_random, |
| 1063 | &catch_exception_random, |
| 1064 | &catch_exception_random, |
| 1065 | &catch_exception_random, |
| 1066 | &catch_exception_random, |
| 1067 | &catch_exception_random, |
| 1068 | &catch_exception_random, |
| 1069 | &catch_exception_random, |
| 1070 | &catch_exception_random, |
| 1071 | &catch_exception_random, |
| 1072 | &catch_exception_random, |
| 1073 | &catch_exception_random, |
| 1074 | &catch_exception_random, |
| 1075 | &catch_exception_random, |
| 1076 | &catch_exception_random, |
| 1077 | &catch_exception_random, |
| 1078 | &catch_exception_random, |
| 1079 | &catch_exception_random, |
| 1080 | &catch_exception_random, |
| 1081 | &catch_exception_random, |
| 1082 | &catch_exception_random, |
| 1083 | &catch_exception_random, |
| 1084 | &catch_exception_random, |
| 1085 | &catch_exception_random, |
| 1086 | &catch_exception_random, |
| 1087 | &catch_exception_random, |
| 1088 | &catch_exception_random, |
| 1089 | &catch_exception_random, |
| 1090 | &catch_exception_random, |
| 1091 | &catch_exception_random, |
| 1092 | &catch_exception_random, |
| 1093 | &catch_exception_random, |
| 1094 | &catch_exception_random, |
| 1095 | &catch_exception_random, |
| 1096 | &catch_exception_random, |
| 1097 | &catch_exception_random, |
| 1098 | &catch_exception_random, |
| 1099 | &catch_exception_random, |
| 1100 | &catch_exception_random, |
| 1101 | &catch_exception_random, |
| 1102 | &catch_exception_random, |
| 1103 | &catch_exception_random, |
| 1104 | &catch_exception_random, |
| 1105 | &catch_exception_random, |
| 1106 | &catch_exception_random, |
| 1107 | &catch_exception_random, |
| 1108 | &catch_exception_random, |
| 1109 | &catch_exception_random, |
| 1110 | &catch_exception_random, |
| 1111 | &catch_exception_random, |
| 1112 | &catch_exception_random, |
| 1113 | &catch_exception_random, |
| 1114 | &catch_exception_random, |
| 1115 | &catch_exception_255}}; |
| 1116 | |
| 1117 | #define BCR (*(volatile short *)(0x05FFFFA0)) /* Bus control register */ |
| 1118 | #define BAS (0x800) /* Byte access select */ |
| 1119 | #define WCR1 (*(volatile short *)(0x05ffffA2)) /* Wait state control register */ |
| 1120 | |
| 1121 | asm ("_BINIT: mov.l L1,r15"); |
| 1122 | asm ("bra _INIT"); |
| 1123 | asm ("nop"); |
| 1124 | asm ("L1: .long _init_stack + 8*1024*4"); |
| 1125 | void |
| 1126 | INIT (void) |
| 1127 | { |
| 1128 | /* First turn on the ram */ |
| 1129 | WCR1 = 0; /* Never sample wait */ |
| 1130 | BCR = BAS; /* use lowbyte/high byte */ |
| 1131 | |
| 1132 | init_serial(); |
| 1133 | |
| 1134 | #ifdef MONITOR |
| 1135 | reset_hook (); |
| 1136 | #endif |
| 1137 | |
| 1138 | |
| 1139 | in_nmi = 0; |
| 1140 | dofault = 1; |
| 1141 | stepped = 0; |
| 1142 | |
| 1143 | stub_sp = stub_stack + stub_stack_size; |
| 1144 | breakpoint (); |
| 1145 | |
| 1146 | while (1) |
| 1147 | ; |
| 1148 | } |
| 1149 | |
| 1150 | |
| 1151 | static void sr() |
| 1152 | { |
| 1153 | |
| 1154 | |
| 1155 | /* Calling Reset does the same as pressing the button */ |
| 1156 | asm (".global _Reset |
| 1157 | .global _WarmReset |
| 1158 | _Reset: |
| 1159 | _WarmReset: |
| 1160 | mov.l L_sp,r15 |
| 1161 | bra _INIT |
| 1162 | nop |
| 1163 | .align 2 |
| 1164 | L_sp: .long _init_stack + 8000"); |
| 1165 | |
| 1166 | asm("saveRegisters: |
| 1167 | mov.l @(L_reg, pc), r0 |
| 1168 | mov.l @r15+, r1 ! pop R0 |
| 1169 | mov.l r2, @(0x08, r0) ! save R2 |
| 1170 | mov.l r1, @r0 ! save R0 |
| 1171 | mov.l @r15+, r1 ! pop R1 |
| 1172 | mov.l r3, @(0x0c, r0) ! save R3 |
| 1173 | mov.l r1, @(0x04, r0) ! save R1 |
| 1174 | mov.l r4, @(0x10, r0) ! save R4 |
| 1175 | mov.l r5, @(0x14, r0) ! save R5 |
| 1176 | mov.l r6, @(0x18, r0) ! save R6 |
| 1177 | mov.l r7, @(0x1c, r0) ! save R7 |
| 1178 | mov.l r8, @(0x20, r0) ! save R8 |
| 1179 | mov.l r9, @(0x24, r0) ! save R9 |
| 1180 | mov.l r10, @(0x28, r0) ! save R10 |
| 1181 | mov.l r11, @(0x2c, r0) ! save R11 |
| 1182 | mov.l r12, @(0x30, r0) ! save R12 |
| 1183 | mov.l r13, @(0x34, r0) ! save R13 |
| 1184 | mov.l r14, @(0x38, r0) ! save R14 |
| 1185 | mov.l @r15+, r4 ! save arg to handleException |
| 1186 | add #8, r15 ! hide PC/SR values on stack |
| 1187 | mov.l r15, @(0x3c, r0) ! save R15 |
| 1188 | add #-8, r15 ! save still needs old SP value |
| 1189 | add #92, r0 ! readjust register pointer |
| 1190 | mov r15, r2 |
| 1191 | add #4, r2 |
| 1192 | mov.l @r2, r2 ! R2 has SR |
| 1193 | mov.l @r15, r1 ! R1 has PC |
| 1194 | mov.l r2, @-r0 ! save SR |
| 1195 | sts.l macl, @-r0 ! save MACL |
| 1196 | sts.l mach, @-r0 ! save MACH |
| 1197 | stc.l vbr, @-r0 ! save VBR |
| 1198 | stc.l gbr, @-r0 ! save GBR |
| 1199 | sts.l pr, @-r0 ! save PR |
| 1200 | mov.l @(L_stubstack, pc), r2 |
| 1201 | mov.l @(L_hdl_except, pc), r3 |
| 1202 | mov.l @r2, r15 |
| 1203 | jsr @r3 |
| 1204 | mov.l r1, @-r0 ! save PC |
| 1205 | mov.l @(L_stubstack, pc), r0 |
| 1206 | mov.l @(L_reg, pc), r1 |
| 1207 | bra restoreRegisters |
| 1208 | mov.l r15, @r0 ! save __stub_stack |
| 1209 | |
| 1210 | .align 2 |
| 1211 | L_reg: |
| 1212 | .long _registers |
| 1213 | L_stubstack: |
| 1214 | .long _stub_sp |
| 1215 | L_hdl_except: |
| 1216 | .long _handle_exception"); |
| 1217 | |
| 1218 | } |
| 1219 | |
| 1220 | static void rr() |
| 1221 | { |
| 1222 | asm(" |
| 1223 | .align 2 |
| 1224 | .global _resume |
| 1225 | _resume: |
| 1226 | mov r4,r1 |
| 1227 | restoreRegisters: |
| 1228 | add #8, r1 ! skip to R2 |
| 1229 | mov.l @r1+, r2 ! restore R2 |
| 1230 | mov.l @r1+, r3 ! restore R3 |
| 1231 | mov.l @r1+, r4 ! restore R4 |
| 1232 | mov.l @r1+, r5 ! restore R5 |
| 1233 | mov.l @r1+, r6 ! restore R6 |
| 1234 | mov.l @r1+, r7 ! restore R7 |
| 1235 | mov.l @r1+, r8 ! restore R8 |
| 1236 | mov.l @r1+, r9 ! restore R9 |
| 1237 | mov.l @r1+, r10 ! restore R10 |
| 1238 | mov.l @r1+, r11 ! restore R11 |
| 1239 | mov.l @r1+, r12 ! restore R12 |
| 1240 | mov.l @r1+, r13 ! restore R13 |
| 1241 | mov.l @r1+, r14 ! restore R14 |
| 1242 | mov.l @r1+, r15 ! restore programs stack |
| 1243 | mov.l @r1+, r0 |
| 1244 | add #-8, r15 ! uncover PC/SR on stack |
| 1245 | mov.l r0, @r15 ! restore PC onto stack |
| 1246 | lds.l @r1+, pr ! restore PR |
| 1247 | ldc.l @r1+, gbr ! restore GBR |
| 1248 | ldc.l @r1+, vbr ! restore VBR |
| 1249 | lds.l @r1+, mach ! restore MACH |
| 1250 | lds.l @r1+, macl ! restore MACL |
| 1251 | mov.l @r1, r0 |
| 1252 | add #-88, r1 ! readjust reg pointer to R1 |
| 1253 | mov.l r0, @(4, r15) ! restore SR onto stack+4 |
| 1254 | mov.l r2, @-r15 |
| 1255 | mov.l L_in_nmi, r0 |
| 1256 | mov #0, r2 |
| 1257 | mov.b r2, @r0 |
| 1258 | mov.l @r15+, r2 |
| 1259 | mov.l @r1+, r0 ! restore R0 |
| 1260 | rte |
| 1261 | mov.l @r1, r1 ! restore R1 |
| 1262 | |
| 1263 | "); |
| 1264 | } |
| 1265 | |
| 1266 | |
| 1267 | static __inline__ void code_for_catch_exception(int n) |
| 1268 | { |
| 1269 | asm(" .globl _catch_exception_%O0" : : "i" (n) ); |
| 1270 | asm(" _catch_exception_%O0:" :: "i" (n) ); |
| 1271 | |
| 1272 | asm(" add #-4, r15 ! reserve spot on stack "); |
| 1273 | asm(" mov.l r1, @-r15 ! push R1 "); |
| 1274 | |
| 1275 | if (n == NMI_VEC) |
| 1276 | { |
| 1277 | /* Special case for NMI - make sure that they don't nest */ |
| 1278 | asm(" mov.l r0, @-r15 ! push R0"); |
| 1279 | asm(" mov.l L_in_nmi, r0"); |
| 1280 | asm(" tas.b @r0 ! Fend off against addtnl NMIs"); |
| 1281 | asm(" bt noNMI"); |
| 1282 | asm(" mov.l @r15+, r0"); |
| 1283 | asm(" mov.l @r15+, r1"); |
| 1284 | asm(" add #4, r15"); |
| 1285 | asm(" rte"); |
| 1286 | asm(" nop"); |
| 1287 | asm(".align 2"); |
| 1288 | asm("L_in_nmi: .long _in_nmi"); |
| 1289 | asm("noNMI:"); |
| 1290 | } |
| 1291 | else |
| 1292 | { |
| 1293 | |
| 1294 | if (n == CPU_BUS_ERROR_VEC) |
| 1295 | { |
| 1296 | /* Exception 9 (bus errors) are disasbleable - so that you |
| 1297 | can probe memory and get zero instead of a fault. |
| 1298 | Because the vector table may be in ROM we don't revector |
| 1299 | the interrupt like all the other stubs, we check in here |
| 1300 | */ |
| 1301 | asm("mov.l L_dofault,r1"); |
| 1302 | asm("mov.l @r1,r1"); |
| 1303 | asm("tst r1,r1"); |
| 1304 | asm("bf faultaway"); |
| 1305 | asm("bsr _handle_buserror"); |
| 1306 | asm(".align 2"); |
| 1307 | asm("L_dofault: .long _dofault"); |
| 1308 | asm("faultaway:"); |
| 1309 | } |
| 1310 | asm(" mov #15<<4, r1 "); |
| 1311 | asm(" ldc r1, sr ! disable interrupts "); |
| 1312 | asm(" mov.l r0, @-r15 ! push R0 "); |
| 1313 | } |
| 1314 | |
| 1315 | /* Prepare for saving context, we've already pushed r0 and r1, stick exception number |
| 1316 | into the frame */ |
| 1317 | asm(" mov r15, r0 "); |
| 1318 | asm(" add #8, r0 "); |
| 1319 | asm(" mov %0,r1" :: "i" (n) ); |
| 1320 | asm(" extu.b r1,r1 "); |
| 1321 | asm(" bra saveRegisters ! save register values "); |
| 1322 | asm(" mov.l r1, @r0 ! save exception # "); |
| 1323 | } |
| 1324 | |
| 1325 | |
| 1326 | static void |
| 1327 | exceptions (void) |
| 1328 | { |
| 1329 | code_for_catch_exception (CPU_BUS_ERROR_VEC); |
| 1330 | code_for_catch_exception (DMA_BUS_ERROR_VEC); |
| 1331 | code_for_catch_exception (INVALID_INSN_VEC); |
| 1332 | code_for_catch_exception (INVALID_SLOT_VEC); |
| 1333 | code_for_catch_exception (NMI_VEC); |
| 1334 | code_for_catch_exception (TRAP_VEC); |
| 1335 | code_for_catch_exception (USER_VEC); |
| 1336 | code_for_catch_exception (IO_VEC); |
| 1337 | } |
| 1338 | |
| 1339 | |
| 1340 | |
| 1341 | |
| 1342 | |
| 1343 | |
| 1344 | /* Support for Serial I/O using on chip uart */ |
| 1345 | |
| 1346 | #define SMR0 (*(volatile char *)(0x05FFFEC0)) /* Channel 0 serial mode register */ |
| 1347 | #define BRR0 (*(volatile char *)(0x05FFFEC1)) /* Channel 0 bit rate register */ |
| 1348 | #define SCR0 (*(volatile char *)(0x05FFFEC2)) /* Channel 0 serial control register */ |
| 1349 | #define TDR0 (*(volatile char *)(0x05FFFEC3)) /* Channel 0 transmit data register */ |
| 1350 | #define SSR0 (*(volatile char *)(0x05FFFEC4)) /* Channel 0 serial status register */ |
| 1351 | #define RDR0 (*(volatile char *)(0x05FFFEC5)) /* Channel 0 receive data register */ |
| 1352 | |
| 1353 | #define SMR1 (*(volatile char *)(0x05FFFEC8)) /* Channel 1 serial mode register */ |
| 1354 | #define BRR1 (*(volatile char *)(0x05FFFEC9)) /* Channel 1 bit rate register */ |
| 1355 | #define SCR1 (*(volatile char *)(0x05FFFECA)) /* Channel 1 serial control register */ |
| 1356 | #define TDR1 (*(volatile char *)(0x05FFFECB)) /* Channel 1 transmit data register */ |
| 1357 | #define SSR1 (*(volatile char *)(0x05FFFECC)) /* Channel 1 serial status register */ |
| 1358 | #define RDR1 (*(volatile char *)(0x05FFFECD)) /* Channel 1 receive data register */ |
| 1359 | |
| 1360 | /* |
| 1361 | * Serial mode register bits |
| 1362 | */ |
| 1363 | |
| 1364 | #define SYNC_MODE 0x80 |
| 1365 | #define SEVEN_BIT_DATA 0x40 |
| 1366 | #define PARITY_ON 0x20 |
| 1367 | #define ODD_PARITY 0x10 |
| 1368 | #define STOP_BITS_2 0x08 |
| 1369 | #define ENABLE_MULTIP 0x04 |
| 1370 | #define PHI_64 0x03 |
| 1371 | #define PHI_16 0x02 |
| 1372 | #define PHI_4 0x01 |
| 1373 | |
| 1374 | /* |
| 1375 | * Serial control register bits |
| 1376 | */ |
| 1377 | #define SCI_TIE 0x80 /* Transmit interrupt enable */ |
| 1378 | #define SCI_RIE 0x40 /* Receive interrupt enable */ |
| 1379 | #define SCI_TE 0x20 /* Transmit enable */ |
| 1380 | #define SCI_RE 0x10 /* Receive enable */ |
| 1381 | #define SCI_MPIE 0x08 /* Multiprocessor interrupt enable */ |
| 1382 | #define SCI_TEIE 0x04 /* Transmit end interrupt enable */ |
| 1383 | #define SCI_CKE1 0x02 /* Clock enable 1 */ |
| 1384 | #define SCI_CKE0 0x01 /* Clock enable 0 */ |
| 1385 | |
| 1386 | /* |
| 1387 | * Serial status register bits |
| 1388 | */ |
| 1389 | #define SCI_TDRE 0x80 /* Transmit data register empty */ |
| 1390 | #define SCI_RDRF 0x40 /* Receive data register full */ |
| 1391 | #define SCI_ORER 0x20 /* Overrun error */ |
| 1392 | #define SCI_FER 0x10 /* Framing error */ |
| 1393 | #define SCI_PER 0x08 /* Parity error */ |
| 1394 | #define SCI_TEND 0x04 /* Transmit end */ |
| 1395 | #define SCI_MPB 0x02 /* Multiprocessor bit */ |
| 1396 | #define SCI_MPBT 0x01 /* Multiprocessor bit transfer */ |
| 1397 | |
| 1398 | |
| 1399 | /* |
| 1400 | * Port B IO Register (PBIOR) |
| 1401 | */ |
| 1402 | #define PBIOR (*(volatile char *)(0x05FFFFC6)) |
| 1403 | #define PB15IOR 0x8000 |
| 1404 | #define PB14IOR 0x4000 |
| 1405 | #define PB13IOR 0x2000 |
| 1406 | #define PB12IOR 0x1000 |
| 1407 | #define PB11IOR 0x0800 |
| 1408 | #define PB10IOR 0x0400 |
| 1409 | #define PB9IOR 0x0200 |
| 1410 | #define PB8IOR 0x0100 |
| 1411 | #define PB7IOR 0x0080 |
| 1412 | #define PB6IOR 0x0040 |
| 1413 | #define PB5IOR 0x0020 |
| 1414 | #define PB4IOR 0x0010 |
| 1415 | #define PB3IOR 0x0008 |
| 1416 | #define PB2IOR 0x0004 |
| 1417 | #define PB1IOR 0x0002 |
| 1418 | #define PB0IOR 0x0001 |
| 1419 | |
| 1420 | /* |
| 1421 | * Port B Control Register (PBCR1) |
| 1422 | */ |
| 1423 | #define PBCR1 (*(volatile short *)(0x05FFFFCC)) |
| 1424 | #define PB15MD1 0x8000 |
| 1425 | #define PB15MD0 0x4000 |
| 1426 | #define PB14MD1 0x2000 |
| 1427 | #define PB14MD0 0x1000 |
| 1428 | #define PB13MD1 0x0800 |
| 1429 | #define PB13MD0 0x0400 |
| 1430 | #define PB12MD1 0x0200 |
| 1431 | #define PB12MD0 0x0100 |
| 1432 | #define PB11MD1 0x0080 |
| 1433 | #define PB11MD0 0x0040 |
| 1434 | #define PB10MD1 0x0020 |
| 1435 | #define PB10MD0 0x0010 |
| 1436 | #define PB9MD1 0x0008 |
| 1437 | #define PB9MD0 0x0004 |
| 1438 | #define PB8MD1 0x0002 |
| 1439 | #define PB8MD0 0x0001 |
| 1440 | |
| 1441 | #define PB15MD PB15MD1|PB14MD0 |
| 1442 | #define PB14MD PB14MD1|PB14MD0 |
| 1443 | #define PB13MD PB13MD1|PB13MD0 |
| 1444 | #define PB12MD PB12MD1|PB12MD0 |
| 1445 | #define PB11MD PB11MD1|PB11MD0 |
| 1446 | #define PB10MD PB10MD1|PB10MD0 |
| 1447 | #define PB9MD PB9MD1|PB9MD0 |
| 1448 | #define PB8MD PB8MD1|PB8MD0 |
| 1449 | |
| 1450 | #define PB_TXD1 PB11MD1 |
| 1451 | #define PB_RXD1 PB10MD1 |
| 1452 | #define PB_TXD0 PB9MD1 |
| 1453 | #define PB_RXD0 PB8MD1 |
| 1454 | |
| 1455 | /* |
| 1456 | * Port B Control Register (PBCR2) |
| 1457 | */ |
| 1458 | #define PBCR2 0x05FFFFCE |
| 1459 | #define PB7MD1 0x8000 |
| 1460 | #define PB7MD0 0x4000 |
| 1461 | #define PB6MD1 0x2000 |
| 1462 | #define PB6MD0 0x1000 |
| 1463 | #define PB5MD1 0x0800 |
| 1464 | #define PB5MD0 0x0400 |
| 1465 | #define PB4MD1 0x0200 |
| 1466 | #define PB4MD0 0x0100 |
| 1467 | #define PB3MD1 0x0080 |
| 1468 | #define PB3MD0 0x0040 |
| 1469 | #define PB2MD1 0x0020 |
| 1470 | #define PB2MD0 0x0010 |
| 1471 | #define PB1MD1 0x0008 |
| 1472 | #define PB1MD0 0x0004 |
| 1473 | #define PB0MD1 0x0002 |
| 1474 | #define PB0MD0 0x0001 |
| 1475 | |
| 1476 | #define PB7MD PB7MD1|PB7MD0 |
| 1477 | #define PB6MD PB6MD1|PB6MD0 |
| 1478 | #define PB5MD PB5MD1|PB5MD0 |
| 1479 | #define PB4MD PB4MD1|PB4MD0 |
| 1480 | #define PB3MD PB3MD1|PB3MD0 |
| 1481 | #define PB2MD PB2MD1|PB2MD0 |
| 1482 | #define PB1MD PB1MD1|PB1MD0 |
| 1483 | #define PB0MD PB0MD1|PB0MD0 |
| 1484 | |
| 1485 | |
| 1486 | #ifdef MHZ |
| 1487 | #define BPS 32 * 9600 * MHZ / ( BAUD * 10) |
| 1488 | #else |
| 1489 | #define BPS 32 /* 9600 for 10 Mhz */ |
| 1490 | #endif |
| 1491 | |
| 1492 | void handleError (char theSSR); |
| 1493 | |
| 1494 | void |
| 1495 | nop (void) |
| 1496 | { |
| 1497 | |
| 1498 | } |
| 1499 | void |
| 1500 | init_serial (void) |
| 1501 | { |
| 1502 | int i; |
| 1503 | |
| 1504 | /* Clear TE and RE in Channel 1's SCR */ |
| 1505 | SCR1 &= ~(SCI_TE | SCI_RE); |
| 1506 | |
| 1507 | /* Set communication to be async, 8-bit data, no parity, 1 stop bit and use internal clock */ |
| 1508 | |
| 1509 | SMR1 = 0; |
| 1510 | BRR1 = BPS; |
| 1511 | |
| 1512 | SCR1 &= ~(SCI_CKE1 | SCI_CKE0); |
| 1513 | |
| 1514 | /* let the hardware settle */ |
| 1515 | |
| 1516 | for (i = 0; i < 1000; i++) |
| 1517 | nop (); |
| 1518 | |
| 1519 | /* Turn on in and out */ |
| 1520 | SCR1 |= SCI_RE | SCI_TE; |
| 1521 | |
| 1522 | /* Set the PFC to make RXD1 (pin PB8) an input pin and TXD1 (pin PB9) an output pin */ |
| 1523 | PBCR1 &= ~(PB_TXD1 | PB_RXD1); |
| 1524 | PBCR1 |= PB_TXD1 | PB_RXD1; |
| 1525 | } |
| 1526 | |
| 1527 | |
| 1528 | int |
| 1529 | getDebugCharReady (void) |
| 1530 | { |
| 1531 | char mySSR; |
| 1532 | mySSR = SSR1 & ( SCI_PER | SCI_FER | SCI_ORER ); |
| 1533 | if ( mySSR ) |
| 1534 | handleError ( mySSR ); |
| 1535 | return SSR1 & SCI_RDRF ; |
| 1536 | } |
| 1537 | |
| 1538 | char |
| 1539 | getDebugChar (void) |
| 1540 | { |
| 1541 | char ch; |
| 1542 | char mySSR; |
| 1543 | |
| 1544 | while ( ! getDebugCharReady()) |
| 1545 | ; |
| 1546 | |
| 1547 | ch = RDR1; |
| 1548 | SSR1 &= ~SCI_RDRF; |
| 1549 | |
| 1550 | mySSR = SSR1 & (SCI_PER | SCI_FER | SCI_ORER); |
| 1551 | |
| 1552 | if (mySSR) |
| 1553 | handleError (mySSR); |
| 1554 | |
| 1555 | return ch; |
| 1556 | } |
| 1557 | |
| 1558 | int |
| 1559 | putDebugCharReady (void) |
| 1560 | { |
| 1561 | return (SSR1 & SCI_TDRE); |
| 1562 | } |
| 1563 | |
| 1564 | void |
| 1565 | putDebugChar (char ch) |
| 1566 | { |
| 1567 | while (!putDebugCharReady()) |
| 1568 | ; |
| 1569 | |
| 1570 | /* |
| 1571 | * Write data into TDR and clear TDRE |
| 1572 | */ |
| 1573 | TDR1 = ch; |
| 1574 | SSR1 &= ~SCI_TDRE; |
| 1575 | } |
| 1576 | |
| 1577 | void |
| 1578 | handleError (char theSSR) |
| 1579 | { |
| 1580 | SSR1 &= ~(SCI_ORER | SCI_PER | SCI_FER); |
| 1581 | } |
| 1582 | |
| 1583 | #endif |