| 1 | /* Interface between GDB and target environments, including files and processes |
| 2 | Copyright 1990, 1991, 1992 Free Software Foundation, Inc. |
| 3 | Contributed by Cygnus Support. Written by John Gilmore. |
| 4 | |
| 5 | This file is part of GDB. |
| 6 | |
| 7 | This program is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 2 of the License, or |
| 10 | (at your option) any later version. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ |
| 20 | |
| 21 | #if !defined (TARGET_H) |
| 22 | #define TARGET_H |
| 23 | |
| 24 | /* This include file defines the interface between the main part |
| 25 | of the debugger, and the part which is target-specific, or |
| 26 | specific to the communications interface between us and the |
| 27 | target. |
| 28 | |
| 29 | A TARGET is an interface between the debugger and a particular |
| 30 | kind of file or process. Targets can be STACKED in STRATA, |
| 31 | so that more than one target can potentially respond to a request. |
| 32 | In particular, memory accesses will walk down the stack of targets |
| 33 | until they find a target that is interested in handling that particular |
| 34 | address. STRATA are artificial boundaries on the stack, within |
| 35 | which particular kinds of targets live. Strata exist so that |
| 36 | people don't get confused by pushing e.g. a process target and then |
| 37 | a file target, and wondering why they can't see the current values |
| 38 | of variables any more (the file target is handling them and they |
| 39 | never get to the process target). So when you push a file target, |
| 40 | it goes into the file stratum, which is always below the process |
| 41 | stratum. */ |
| 42 | |
| 43 | #include "bfd.h" |
| 44 | |
| 45 | enum strata { |
| 46 | dummy_stratum, /* The lowest of the low */ |
| 47 | file_stratum, /* Executable files, etc */ |
| 48 | core_stratum, /* Core dump files */ |
| 49 | process_stratum /* Executing processes */ |
| 50 | }; |
| 51 | |
| 52 | struct target_ops |
| 53 | { |
| 54 | char *to_shortname; /* Name this target type */ |
| 55 | char *to_longname; /* Name for printing */ |
| 56 | char *to_doc; /* Documentation. Does not include trailing |
| 57 | newline, and starts with a one-line descrip- |
| 58 | tion (probably similar to to_longname). */ |
| 59 | void (*to_open) PARAMS ((char *, int)); |
| 60 | void (*to_close) PARAMS ((int)); |
| 61 | void (*to_attach) PARAMS ((char *, int)); |
| 62 | void (*to_detach) PARAMS ((char *, int)); |
| 63 | void (*to_resume) PARAMS ((int, int)); |
| 64 | int (*to_wait) PARAMS ((int *)); |
| 65 | void (*to_fetch_registers) PARAMS ((int)); |
| 66 | void (*to_store_registers) PARAMS ((int)); |
| 67 | void (*to_prepare_to_store) PARAMS ((void)); |
| 68 | int (*to_xfer_memory) PARAMS ((CORE_ADDR, char *, int, int, |
| 69 | struct target_ops *)); |
| 70 | void (*to_files_info) PARAMS ((struct target_ops *)); |
| 71 | int (*to_insert_breakpoint) PARAMS ((CORE_ADDR, char *)); |
| 72 | int (*to_remove_breakpoint) PARAMS ((CORE_ADDR, char *)); |
| 73 | void (*to_terminal_init) PARAMS ((void)); |
| 74 | void (*to_terminal_inferior) PARAMS ((void)); |
| 75 | void (*to_terminal_ours_for_output) PARAMS ((void)); |
| 76 | void (*to_terminal_ours) PARAMS ((void)); |
| 77 | void (*to_terminal_info) PARAMS ((char *, int)); |
| 78 | void (*to_kill) PARAMS ((void)); |
| 79 | void (*to_load) PARAMS ((char *, int)); |
| 80 | int (*to_lookup_symbol) PARAMS ((char *, CORE_ADDR *)); |
| 81 | void (*to_create_inferior) PARAMS ((char *, char *, char **)); |
| 82 | void (*to_mourn_inferior) PARAMS ((void)); |
| 83 | enum strata to_stratum; |
| 84 | struct target_ops |
| 85 | *to_next; |
| 86 | int to_has_all_memory; |
| 87 | int to_has_memory; |
| 88 | int to_has_stack; |
| 89 | int to_has_registers; |
| 90 | int to_has_execution; |
| 91 | struct section_table |
| 92 | *to_sections; |
| 93 | struct section_table |
| 94 | *to_sections_end; |
| 95 | int to_magic; |
| 96 | /* Need sub-structure for target machine related rather than comm related? */ |
| 97 | }; |
| 98 | |
| 99 | /* Magic number for checking ops size. If a struct doesn't end with this |
| 100 | number, somebody changed the declaration but didn't change all the |
| 101 | places that initialize one. */ |
| 102 | |
| 103 | #define OPS_MAGIC 3840 |
| 104 | |
| 105 | /* The ops structure for our "current" target process. */ |
| 106 | |
| 107 | extern struct target_ops *current_target; |
| 108 | |
| 109 | /* Define easy words for doing these operations on our current target. */ |
| 110 | |
| 111 | #define target_shortname (current_target->to_shortname) |
| 112 | #define target_longname (current_target->to_longname) |
| 113 | |
| 114 | /* The open routine takes the rest of the parameters from the command, |
| 115 | and (if successful) pushes a new target onto the stack. |
| 116 | Targets should supply this routine, if only to provide an error message. */ |
| 117 | #define target_open(name, from_tty) \ |
| 118 | (*current_target->to_open) (name, from_tty) |
| 119 | |
| 120 | /* Does whatever cleanup is required for a target that we are no longer |
| 121 | going to be calling. Argument says whether we are quitting gdb and |
| 122 | should not get hung in case of errors, or whether we want a clean |
| 123 | termination even if it takes a while. This routine is automatically |
| 124 | always called just before a routine is popped off the target stack. |
| 125 | Closing file descriptors and freeing memory are typical things it should |
| 126 | do. */ |
| 127 | |
| 128 | #define target_close(quitting) \ |
| 129 | (*current_target->to_close) (quitting) |
| 130 | |
| 131 | /* Attaches to a process on the target side. */ |
| 132 | |
| 133 | #define target_attach(args, from_tty) \ |
| 134 | (*current_target->to_attach) (args, from_tty) |
| 135 | |
| 136 | /* Takes a program previously attached to and detaches it. |
| 137 | The program may resume execution (some targets do, some don't) and will |
| 138 | no longer stop on signals, etc. We better not have left any breakpoints |
| 139 | in the program or it'll die when it hits one. ARGS is arguments |
| 140 | typed by the user (e.g. a signal to send the process). FROM_TTY |
| 141 | says whether to be verbose or not. */ |
| 142 | |
| 143 | #define target_detach(args, from_tty) \ |
| 144 | (*current_target->to_detach) (args, from_tty) |
| 145 | |
| 146 | /* Resume execution of the target process. STEP says whether to single-step |
| 147 | or to run free; SIGGNAL is the signal value (e.g. SIGINT) to be given |
| 148 | to the target, or zero for no signal. */ |
| 149 | |
| 150 | #define target_resume(step, siggnal) \ |
| 151 | (*current_target->to_resume) (step, siggnal) |
| 152 | |
| 153 | /* Wait for inferior process to do something. Return pid of child, |
| 154 | or -1 in case of error; store status through argument pointer STATUS. */ |
| 155 | |
| 156 | #define target_wait(status) \ |
| 157 | (*current_target->to_wait) (status) |
| 158 | |
| 159 | /* Fetch register REGNO, or all regs if regno == -1. No result. */ |
| 160 | |
| 161 | #define target_fetch_registers(regno) \ |
| 162 | (*current_target->to_fetch_registers) (regno) |
| 163 | |
| 164 | /* Store at least register REGNO, or all regs if REGNO == -1. |
| 165 | It can store as many registers as it wants to, so the entire registers |
| 166 | array must be valid. Result is 0 for success, -1 for problems. */ |
| 167 | |
| 168 | #define target_store_registers(regs) \ |
| 169 | (*current_target->to_store_registers) (regs) |
| 170 | |
| 171 | /* Get ready to modify the registers array. On machines which store |
| 172 | individual registers, this doesn't need to do anything. On machines |
| 173 | which store all the registers in one fell swoop, this makes sure |
| 174 | that REGISTERS contains all the registers from the program being |
| 175 | debugged. */ |
| 176 | |
| 177 | #define target_prepare_to_store() \ |
| 178 | (*current_target->to_prepare_to_store) () |
| 179 | |
| 180 | /* Reading and writing memory actually happens through a glue |
| 181 | function which iterates across the various targets. Result is |
| 182 | 0 for success, or an errno value. */ |
| 183 | |
| 184 | extern int |
| 185 | target_read_string PARAMS ((CORE_ADDR, char *, int)); |
| 186 | |
| 187 | extern int |
| 188 | target_read_memory PARAMS ((CORE_ADDR, char *, int)); |
| 189 | |
| 190 | extern int |
| 191 | target_write_memory PARAMS ((CORE_ADDR, char *, int)); |
| 192 | |
| 193 | extern int |
| 194 | xfer_memory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *)); |
| 195 | |
| 196 | extern int |
| 197 | child_xfer_memory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *)); |
| 198 | |
| 199 | extern int |
| 200 | target_xfer_memory PARAMS ((CORE_ADDR, char *, int, int)); |
| 201 | |
| 202 | /* From exec.c */ |
| 203 | |
| 204 | extern void |
| 205 | print_section_info PARAMS ((struct target_ops *, bfd *)); |
| 206 | |
| 207 | /* Print a line about the current target. */ |
| 208 | |
| 209 | #define target_files_info() \ |
| 210 | (*current_target->to_files_info) (current_target) |
| 211 | |
| 212 | /* Insert a breakpoint at address ADDR in the target machine. |
| 213 | SAVE is a pointer to memory allocated for saving the |
| 214 | target contents. It is guaranteed by the caller to be long enough |
| 215 | to save "sizeof BREAKPOINT" bytes. Result is 0 for success, or |
| 216 | an errno value. */ |
| 217 | |
| 218 | #define target_insert_breakpoint(addr, save) \ |
| 219 | (*current_target->to_insert_breakpoint) (addr, save) |
| 220 | |
| 221 | /* Remove a breakpoint at address ADDR in the target machine. |
| 222 | SAVE is a pointer to the same save area |
| 223 | that was previously passed to target_insert_breakpoint. |
| 224 | Result is 0 for success, or an errno value. */ |
| 225 | |
| 226 | #define target_remove_breakpoint(addr, save) \ |
| 227 | (*current_target->to_remove_breakpoint) (addr, save) |
| 228 | |
| 229 | /* Initialize the terminal settings we record for the inferior, |
| 230 | before we actually run the inferior. */ |
| 231 | |
| 232 | #define target_terminal_init() \ |
| 233 | (*current_target->to_terminal_init) () |
| 234 | |
| 235 | /* Put the inferior's terminal settings into effect. |
| 236 | This is preparation for starting or resuming the inferior. */ |
| 237 | |
| 238 | #define target_terminal_inferior() \ |
| 239 | (*current_target->to_terminal_inferior) () |
| 240 | |
| 241 | /* Put some of our terminal settings into effect, |
| 242 | enough to get proper results from our output, |
| 243 | but do not change into or out of RAW mode |
| 244 | so that no input is discarded. |
| 245 | |
| 246 | After doing this, either terminal_ours or terminal_inferior |
| 247 | should be called to get back to a normal state of affairs. */ |
| 248 | |
| 249 | #define target_terminal_ours_for_output() \ |
| 250 | (*current_target->to_terminal_ours_for_output) () |
| 251 | |
| 252 | /* Put our terminal settings into effect. |
| 253 | First record the inferior's terminal settings |
| 254 | so they can be restored properly later. */ |
| 255 | |
| 256 | #define target_terminal_ours() \ |
| 257 | (*current_target->to_terminal_ours) () |
| 258 | |
| 259 | /* Print useful information about our terminal status, if such a thing |
| 260 | exists. */ |
| 261 | |
| 262 | #define target_terminal_info(arg, from_tty) \ |
| 263 | (*current_target->to_terminal_info) (arg, from_tty) |
| 264 | |
| 265 | /* Kill the inferior process. Make it go away. */ |
| 266 | |
| 267 | #define target_kill() \ |
| 268 | (*current_target->to_kill) () |
| 269 | |
| 270 | /* Load an executable file into the target process. This is expected to |
| 271 | not only bring new code into the target process, but also to update |
| 272 | GDB's symbol tables to match. */ |
| 273 | |
| 274 | #define target_load(arg, from_tty) \ |
| 275 | (*current_target->to_load) (arg, from_tty) |
| 276 | |
| 277 | /* Look up a symbol in the target's symbol table. NAME is the symbol |
| 278 | name. ADDRP is a CORE_ADDR * pointing to where the value of the symbol |
| 279 | should be returned. The result is 0 if successful, nonzero if the |
| 280 | symbol does not exist in the target environment. This function should |
| 281 | not call error() if communication with the target is interrupted, since |
| 282 | it is called from symbol reading, but should return nonzero, possibly |
| 283 | doing a complain(). */ |
| 284 | |
| 285 | #define target_lookup_symbol(name, addrp) \ |
| 286 | (*current_target->to_lookup_symbol) (name, addrp) |
| 287 | |
| 288 | /* Start an inferior process and set inferior_pid to its pid. |
| 289 | EXEC_FILE is the file to run. |
| 290 | ALLARGS is a string containing the arguments to the program. |
| 291 | ENV is the environment vector to pass. Errors reported with error(). |
| 292 | On VxWorks and various standalone systems, we ignore exec_file. */ |
| 293 | |
| 294 | #define target_create_inferior(exec_file, args, env) \ |
| 295 | (*current_target->to_create_inferior) (exec_file, args, env) |
| 296 | |
| 297 | /* The inferior process has died. Do what is right. */ |
| 298 | |
| 299 | #define target_mourn_inferior() \ |
| 300 | (*current_target->to_mourn_inferior) () |
| 301 | |
| 302 | /* Pointer to next target in the chain, e.g. a core file and an exec file. */ |
| 303 | |
| 304 | #define target_next \ |
| 305 | (current_target->to_next) |
| 306 | |
| 307 | /* Does the target include all of memory, or only part of it? This |
| 308 | determines whether we look up the target chain for other parts of |
| 309 | memory if this target can't satisfy a request. */ |
| 310 | |
| 311 | #define target_has_all_memory \ |
| 312 | (current_target->to_has_all_memory) |
| 313 | |
| 314 | /* Does the target include memory? (Dummy targets don't.) */ |
| 315 | |
| 316 | #define target_has_memory \ |
| 317 | (current_target->to_has_memory) |
| 318 | |
| 319 | /* Does the target have a stack? (Exec files don't, VxWorks doesn't, until |
| 320 | we start a process.) */ |
| 321 | |
| 322 | #define target_has_stack \ |
| 323 | (current_target->to_has_stack) |
| 324 | |
| 325 | /* Does the target have registers? (Exec files don't.) */ |
| 326 | |
| 327 | #define target_has_registers \ |
| 328 | (current_target->to_has_registers) |
| 329 | |
| 330 | /* Does the target have execution? Can we make it jump (through hoops), |
| 331 | or pop its stack a few times? */ |
| 332 | |
| 333 | #define target_has_execution \ |
| 334 | (current_target->to_has_execution) |
| 335 | |
| 336 | /* Routines for maintenance of the target structures... |
| 337 | |
| 338 | add_target: Add a target to the list of all possible targets. |
| 339 | |
| 340 | push_target: Make this target the top of the stack of currently used |
| 341 | targets, within its particular stratum of the stack. Result |
| 342 | is 0 if now atop the stack, nonzero if not on top (maybe |
| 343 | should warn user). |
| 344 | |
| 345 | unpush_target: Remove this from the stack of currently used targets, |
| 346 | no matter where it is on the list. Returns 0 if no |
| 347 | change, 1 if removed from stack. |
| 348 | |
| 349 | pop_target: Remove the top thing on the stack of current targets. */ |
| 350 | |
| 351 | extern void |
| 352 | add_target PARAMS ((struct target_ops *)); |
| 353 | |
| 354 | extern int |
| 355 | push_target PARAMS ((struct target_ops *)); |
| 356 | |
| 357 | extern int |
| 358 | unpush_target PARAMS ((struct target_ops *)); |
| 359 | |
| 360 | extern void |
| 361 | target_preopen PARAMS ((int)); |
| 362 | |
| 363 | extern void |
| 364 | pop_target PARAMS ((void)); |
| 365 | |
| 366 | /* Struct section_table maps address ranges to file sections. It is |
| 367 | mostly used with BFD files, but can be used without (e.g. for handling |
| 368 | raw disks, or files not in formats handled by BFD). */ |
| 369 | |
| 370 | struct section_table { |
| 371 | CORE_ADDR addr; /* Lowest address in section */ |
| 372 | CORE_ADDR endaddr; /* 1+highest address in section */ |
| 373 | sec_ptr sec_ptr; /* BFD section pointer */ |
| 374 | bfd *bfd; /* BFD file pointer */ |
| 375 | }; |
| 376 | |
| 377 | /* Builds a section table, given args BFD, SECTABLE_PTR, SECEND_PTR. |
| 378 | Returns 0 if OK, 1 on error. */ |
| 379 | |
| 380 | extern int |
| 381 | build_section_table PARAMS ((bfd *, struct section_table **, |
| 382 | struct section_table **)); |
| 383 | |
| 384 | /* From mem-break.c */ |
| 385 | |
| 386 | extern int |
| 387 | memory_remove_breakpoint PARAMS ((CORE_ADDR, char *)); |
| 388 | |
| 389 | extern int |
| 390 | memory_insert_breakpoint PARAMS ((CORE_ADDR, char *)); |
| 391 | |
| 392 | /* From target.c */ |
| 393 | |
| 394 | void |
| 395 | noprocess PARAMS ((void)); |
| 396 | |
| 397 | #endif /* !defined (TARGET_H) */ |