| 1 | # This variant of elf.sc is used for ARM BPABI platforms, like Symbian |
| 2 | # OS, where a separate postlinker will operated on the generated |
| 3 | # executable or shared object. See elf.sc for configuration variables |
| 4 | # that apply; only BPABI-specific variables will be noted here. |
| 5 | # |
| 6 | # Copyright (C) 2014-2015 Free Software Foundation, Inc. |
| 7 | # |
| 8 | # Copying and distribution of this file, with or without modification, |
| 9 | # are permitted in any medium without royalty provided the copyright |
| 10 | # notice and this notice are preserved. |
| 11 | |
| 12 | test -z "$ENTRY" && ENTRY=_start |
| 13 | test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} |
| 14 | test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} |
| 15 | if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi |
| 16 | test -z "${ELFSIZE}" && ELFSIZE=32 |
| 17 | test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" |
| 18 | test "$LD_FLAG" = "N" && DATA_ADDR=. |
| 19 | test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE="" |
| 20 | test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE="" |
| 21 | test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT |
| 22 | DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" |
| 23 | DATA_SEGMENT_RELRO_END="" |
| 24 | DATA_SEGMENT_RELRO_GOTPLT_END="" |
| 25 | DATA_SEGMENT_END="" |
| 26 | if test -n "${COMMONPAGESIZE}"; then |
| 27 | DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})" |
| 28 | DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" |
| 29 | if test -n "${SEPARATE_GOTPLT}"; then |
| 30 | DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (. + ${SEPARATE_GOTPLT});" |
| 31 | else |
| 32 | DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (.);" |
| 33 | fi |
| 34 | fi |
| 35 | INTERP=".interp 0 : { *(.interp) }" |
| 36 | PLT=".plt ${RELOCATING-0} : { *(.plt) }" |
| 37 | RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }" |
| 38 | DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro .data.rel.ro.*) }" |
| 39 | DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) *(.gnu.lto_*) }" |
| 40 | if test -z "${NO_SMALL_DATA}"; then |
| 41 | SBSS=".sbss ${RELOCATING-0} : |
| 42 | { |
| 43 | ${RELOCATING+PROVIDE (__sbss_start = .);} |
| 44 | ${RELOCATING+PROVIDE (___sbss_start = .);} |
| 45 | *(.dynsbss) |
| 46 | *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*}) |
| 47 | *(.scommon) |
| 48 | ${RELOCATING+PROVIDE (__sbss_end = .);} |
| 49 | ${RELOCATING+PROVIDE (___sbss_end = .);} |
| 50 | }" |
| 51 | SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }" |
| 52 | SDATA="/* We want the small data sections together, so single-instruction offsets |
| 53 | can access them all, and initialized data all before uninitialized, so |
| 54 | we can shorten the on-disk segment size. */ |
| 55 | .sdata ${RELOCATING-0} : |
| 56 | { |
| 57 | ${RELOCATING+${SDATA_START_SYMBOLS}} |
| 58 | *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*}) |
| 59 | }" |
| 60 | SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }" |
| 61 | REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) } |
| 62 | .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }" |
| 63 | REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) } |
| 64 | .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }" |
| 65 | REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) } |
| 66 | .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }" |
| 67 | REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) } |
| 68 | .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }" |
| 69 | else |
| 70 | NO_SMALL_DATA=" " |
| 71 | fi |
| 72 | test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" " |
| 73 | INIT_ARRAY=".init_array ${RELOCATING-0} : |
| 74 | { |
| 75 | /* SymbianOS uses this symbol. */ |
| 76 | ${RELOCATING+PROVIDE (SHT\$\$INIT_ARRAY\$\$Base = .);} |
| 77 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}} |
| 78 | KEEP (*(SORT(.init_array.*))) |
| 79 | KEEP (*(.init_array)) |
| 80 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}} |
| 81 | /* SymbianOS uses this symbol. */ |
| 82 | ${RELOCATING+PROVIDE (SHT\$\$INIT_ARRAY\$\$Limit = .);} |
| 83 | }" |
| 84 | FINI_ARRAY=".fini_array ${RELOCATING-0} : |
| 85 | { |
| 86 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}} |
| 87 | KEEP (*(SORT(.fini_array.*))) |
| 88 | KEEP (*(.fini_array)) |
| 89 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}} |
| 90 | }" |
| 91 | CTOR=".ctors ${CONSTRUCTING-0} : |
| 92 | { |
| 93 | ${CONSTRUCTING+${CTOR_START}} |
| 94 | /* gcc uses crtbegin.o to find the start of |
| 95 | the constructors, so we make sure it is |
| 96 | first. Because this is a wildcard, it |
| 97 | doesn't matter if the user does not |
| 98 | actually link against crtbegin.o; the |
| 99 | linker won't look for a file to match a |
| 100 | wildcard. The wildcard also means that it |
| 101 | doesn't matter which directory crtbegin.o |
| 102 | is in. */ |
| 103 | |
| 104 | KEEP (*crtbegin.o(.ctors)) |
| 105 | KEEP (*crtbegin?.o(.ctors)) |
| 106 | |
| 107 | /* We don't want to include the .ctor section from |
| 108 | the crtend.o file until after the sorted ctors. |
| 109 | The .ctor section from the crtend file contains the |
| 110 | end of ctors marker and it must be last */ |
| 111 | |
| 112 | KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors)) |
| 113 | KEEP (*(SORT(.ctors.*))) |
| 114 | KEEP (*(.ctors)) |
| 115 | ${CONSTRUCTING+${CTOR_END}} |
| 116 | }" |
| 117 | DTOR=".dtors ${CONSTRUCTING-0} : |
| 118 | { |
| 119 | ${CONSTRUCTING+${DTOR_START}} |
| 120 | KEEP (*crtbegin.o(.dtors)) |
| 121 | KEEP (*crtbegin?.o(.dtors)) |
| 122 | KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors)) |
| 123 | KEEP (*(SORT(.dtors.*))) |
| 124 | KEEP (*(.dtors)) |
| 125 | ${CONSTRUCTING+${DTOR_END}} |
| 126 | }" |
| 127 | STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} : |
| 128 | { |
| 129 | ${RELOCATING+_stack = .;} |
| 130 | *(.stack) |
| 131 | }" |
| 132 | |
| 133 | TEXT_START_ADDR="SEGMENT_START(\"text\", ${TEXT_START_ADDR})" |
| 134 | SHLIB_TEXT_START_ADDR="SEGMENT_START(\"text\", ${SHLIB_TEXT_START_ADDR:-0})" |
| 135 | DATA_ADDR="SEGMENT_START(\"data\", ${DATA_ADDR-${DATA_SEGMENT_ALIGN}})" |
| 136 | SHLIB_DATA_ADDR="SEGMENT_START(\"data\", ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}})" |
| 137 | |
| 138 | # If this is for an embedded system, don't add SIZEOF_HEADERS. |
| 139 | if [ -z "$EMBEDDED" ]; then |
| 140 | test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS" |
| 141 | SHLIB_BASE_ADDRESS="${SHLIB_TEXT_START_ADDR} + SIZEOF_HEADERS" |
| 142 | else |
| 143 | test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" |
| 144 | SHLIB_BASE_ADDRESS="${SHLIB_TEXT_START_ADDR}" |
| 145 | fi |
| 146 | |
| 147 | cat <<EOF |
| 148 | /* Copyright (C) 2014-2015 Free Software Foundation, Inc. |
| 149 | |
| 150 | Copying and distribution of this script, with or without modification, |
| 151 | are permitted in any medium without royalty provided the copyright |
| 152 | notice and this notice are preserved. */ |
| 153 | |
| 154 | OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", |
| 155 | "${LITTLE_OUTPUT_FORMAT}") |
| 156 | OUTPUT_ARCH(${OUTPUT_ARCH}) |
| 157 | ${RELOCATING+ENTRY(${ENTRY})} |
| 158 | |
| 159 | ${RELOCATING+${LIB_SEARCH_DIRS}} |
| 160 | ${RELOCATING+/* Do we need any of these for elf? |
| 161 | __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */} |
| 162 | ${RELOCATING+${EXECUTABLE_SYMBOLS}} |
| 163 | ${RELOCATING+${INPUT_FILES}} |
| 164 | ${RELOCATING- /* For some reason, the Solaris linker makes bad executables |
| 165 | if gld -r is used and the intermediate file has sections starting |
| 166 | at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld |
| 167 | bug. But for now assigning the zero vmas works. */} |
| 168 | |
| 169 | /* ARM's proprietary toolchain generate these symbols to match the start |
| 170 | and end of particular sections of the image. SymbianOS uses these |
| 171 | symbols. We provide them for compatibility with ARM's toolchains. |
| 172 | These symbols should be bound locally; each shared object may define |
| 173 | its own version of these symbols. */ |
| 174 | |
| 175 | VERSION |
| 176 | { |
| 177 | /* Give these a dummy version to work around linker lameness. |
| 178 | The name used shouldn't matter as these are all local symbols. */ |
| 179 | __GNU { |
| 180 | local: |
| 181 | Image\$\$ER_RO\$\$Base; |
| 182 | Image\$\$ER_RO\$\$Limit; |
| 183 | SHT\$\$INIT_ARRAY\$\$Base; |
| 184 | SHT\$\$INIT_ARRAY\$\$Limit; |
| 185 | .ARM.exidx\$\$Base; |
| 186 | .ARM.exidx\$\$Limit; |
| 187 | }; |
| 188 | } |
| 189 | |
| 190 | SECTIONS |
| 191 | { |
| 192 | /* Read-only sections, merged into text segment: */ |
| 193 | ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR});}}} |
| 194 | |
| 195 | ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+ . = ${TEXT_BASE_ADDRESS};}}} |
| 196 | ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_BASE_ADDRESS};}} |
| 197 | ${CREATE_PIE+${RELOCATING+. = ${SHLIB_BASE_ADDRESS};}} |
| 198 | |
| 199 | /* Define Image\$\$ER_RO\$\$Base. */ |
| 200 | ${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Base = .);} |
| 201 | |
| 202 | ${INITIAL_READONLY_SECTIONS} |
| 203 | |
| 204 | EOF |
| 205 | cat <<EOF |
| 206 | .init ${RELOCATING-0} : |
| 207 | { |
| 208 | ${RELOCATING+${INIT_START}} |
| 209 | KEEP (*(.init)) |
| 210 | ${RELOCATING+${INIT_END}} |
| 211 | } =${NOP-0} |
| 212 | .text ${RELOCATING-0} : |
| 213 | { |
| 214 | ${RELOCATING+${TEXT_START_SYMBOLS}} |
| 215 | *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*}) |
| 216 | /* .gnu.warning sections are handled specially by elf32.em. */ |
| 217 | *(.gnu.warning) |
| 218 | ${RELOCATING+${OTHER_TEXT_SECTIONS}} |
| 219 | } =${NOP-0} |
| 220 | .fini ${RELOCATING-0} : |
| 221 | { |
| 222 | ${RELOCATING+${FINI_START}} |
| 223 | KEEP (*(.fini)) |
| 224 | ${RELOCATING+${FINI_END}} |
| 225 | } =${NOP-0} |
| 226 | /* The SymbianOS kernel requires that the PLT go at the end of the |
| 227 | text section. */ |
| 228 | ${DATA_PLT-${BSS_PLT-${PLT}}} |
| 229 | ${RELOCATING+PROVIDE (__etext = .);} |
| 230 | ${RELOCATING+PROVIDE (_etext = .);} |
| 231 | ${RELOCATING+PROVIDE (etext = .);} |
| 232 | |
| 233 | /* Define Image\$\$ER_RO\$\$Limit. */ |
| 234 | ${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Limit = .);} |
| 235 | |
| 236 | ${WRITABLE_RODATA-${RODATA}} |
| 237 | .rodata1 ${RELOCATING-0} : { *(.rodata1) } |
| 238 | ${CREATE_SHLIB-${SDATA2}} |
| 239 | ${CREATE_SHLIB-${SBSS2}} |
| 240 | |
| 241 | /* On SymbianOS, put .init_array and friends in the read-only |
| 242 | segment; there is no runtime relocation applied to these |
| 243 | arrays. */ |
| 244 | |
| 245 | .preinit_array ${RELOCATING-0} : |
| 246 | { |
| 247 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}} |
| 248 | KEEP (*(.preinit_array)) |
| 249 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}} |
| 250 | } |
| 251 | ${RELOCATING+${INIT_ARRAY}} |
| 252 | ${RELOCATING+${FINI_ARRAY}} |
| 253 | |
| 254 | ${OTHER_READONLY_SECTIONS} |
| 255 | .eh_frame_hdr : { *(.eh_frame_hdr) } |
| 256 | .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) } |
| 257 | .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) } |
| 258 | |
| 259 | /* Adjust the address for the data segment. We want to adjust up to |
| 260 | the same address within the page on the next page up. */ |
| 261 | ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR};}}} |
| 262 | ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR};}} |
| 263 | ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR};}} |
| 264 | |
| 265 | /* Exception handling */ |
| 266 | .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) } |
| 267 | .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) } |
| 268 | |
| 269 | /* Thread Local Storage sections */ |
| 270 | .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } |
| 271 | .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} } |
| 272 | |
| 273 | ${RELOCATING+${CTOR}} |
| 274 | ${RELOCATING+${DTOR}} |
| 275 | .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) } |
| 276 | |
| 277 | ${RELOCATING+${DATARELRO}} |
| 278 | ${OTHER_RELRO_SECTIONS} |
| 279 | ${RELOCATING+${DATA_SEGMENT_RELRO_END}} |
| 280 | |
| 281 | ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}} |
| 282 | |
| 283 | .data ${RELOCATING-0} : |
| 284 | { |
| 285 | ${RELOCATING+${DATA_START_SYMBOLS}} |
| 286 | *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*}) |
| 287 | ${CONSTRUCTING+SORT(CONSTRUCTORS)} |
| 288 | } |
| 289 | .data1 ${RELOCATING-0} : { *(.data1) } |
| 290 | ${WRITABLE_RODATA+${RODATA}} |
| 291 | ${OTHER_READWRITE_SECTIONS} |
| 292 | ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}} |
| 293 | ${CREATE_SHLIB+${SDATA2}} |
| 294 | ${CREATE_SHLIB+${SBSS2}} |
| 295 | ${SDATA} |
| 296 | ${OTHER_SDATA_SECTIONS} |
| 297 | ${RELOCATING+_edata = .;} |
| 298 | ${RELOCATING+PROVIDE (edata = .);} |
| 299 | ${RELOCATING+. = DEFINED(__bss_segment_start) ? __bss_segment_start : .;} |
| 300 | ${RELOCATING+__bss_start = .;} |
| 301 | ${RELOCATING+${OTHER_BSS_SYMBOLS}} |
| 302 | ${SBSS} |
| 303 | ${BSS_PLT+${PLT}} |
| 304 | .bss ${RELOCATING-0} : |
| 305 | { |
| 306 | *(.dynbss) |
| 307 | *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*}) |
| 308 | *(COMMON) |
| 309 | /* Align here to ensure that the .bss section occupies space up to |
| 310 | _end. Align after .bss to ensure correct alignment even if the |
| 311 | .bss section disappears because there are no input sections. */ |
| 312 | ${RELOCATING+. = ALIGN(${ALIGNMENT});} |
| 313 | } |
| 314 | ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} |
| 315 | ${RELOCATING+. = ALIGN(${ALIGNMENT});} |
| 316 | ${RELOCATING+${OTHER_END_SYMBOLS}} |
| 317 | ${RELOCATING+_end = .;} |
| 318 | ${RELOCATING+PROVIDE (end = .);} |
| 319 | ${RELOCATING+${DATA_SEGMENT_END}} |
| 320 | |
| 321 | /* These sections are not mapped under the BPABI. */ |
| 322 | .dynamic 0 : { *(.dynamic) } |
| 323 | .hash 0 : { *(.hash) } |
| 324 | .dynsym 0 : { *(.dynsym) } |
| 325 | .dynstr 0 : { *(.dynstr) } |
| 326 | .gnu.version 0 : { *(.gnu.version) } |
| 327 | .gnu.version_d 0: { *(.gnu.version_d) } |
| 328 | .gnu.version_r 0: { *(.gnu.version_r) } |
| 329 | ${CREATE_SHLIB-${INTERP}} |
| 330 | |
| 331 | /* Stabs debugging sections. */ |
| 332 | .stab 0 : { *(.stab) } |
| 333 | .stabstr 0 : { *(.stabstr) } |
| 334 | .stab.excl 0 : { *(.stab.excl) } |
| 335 | .stab.exclstr 0 : { *(.stab.exclstr) } |
| 336 | .stab.index 0 : { *(.stab.index) } |
| 337 | .stab.indexstr 0 : { *(.stab.indexstr) } |
| 338 | |
| 339 | .comment 0 : { *(.comment) } |
| 340 | EOF |
| 341 | |
| 342 | . $srcdir/scripttempl/DWARF.sc |
| 343 | |
| 344 | cat <<EOF |
| 345 | ${STACK_ADDR+${STACK}} |
| 346 | ${OTHER_SECTIONS} |
| 347 | ${RELOCATING+${OTHER_SYMBOLS}} |
| 348 | ${RELOCATING+${DISCARDED}} |
| 349 | EOF |
| 350 | |
| 351 | # These relocations sections are part of the read-only segment in SVR4 |
| 352 | # executables, but are not mapped in BPABI executables. |
| 353 | if [ "x$COMBRELOC" = x ]; then |
| 354 | COMBRELOCCAT=cat |
| 355 | else |
| 356 | COMBRELOCCAT="cat > $COMBRELOC" |
| 357 | fi |
| 358 | eval $COMBRELOCCAT <<EOF |
| 359 | .rel.init 0 : { *(.rel.init) } |
| 360 | .rela.init 0 : { *(.rela.init) } |
| 361 | .rel.text 0 : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) } |
| 362 | .rela.text 0 : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) } |
| 363 | .rel.fini 0 : { *(.rel.fini) } |
| 364 | .rela.fini 0 : { *(.rela.fini) } |
| 365 | .rel.rodata 0 : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) } |
| 366 | .rela.rodata 0 : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) } |
| 367 | ${OTHER_READONLY_RELOC_SECTIONS} |
| 368 | .rel.data.rel.ro 0 : { *(.rel.data.rel.ro${RELOCATING+ .rel.data.rel.ro.*}) } |
| 369 | .rela.data.rel.ro 0 : { *(.rela.data.rel.ro${RELOCATING+ .rela.data.rel.ro.*}) } |
| 370 | .rel.data 0 : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) } |
| 371 | .rela.data 0 : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) } |
| 372 | .rel.tdata 0 : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) } |
| 373 | .rela.tdata 0 : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) } |
| 374 | .rel.tbss 0 : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) } |
| 375 | .rela.tbss 0 : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) } |
| 376 | .rel.ctors 0 : { *(.rel.ctors) } |
| 377 | .rela.ctors 0 : { *(.rela.ctors) } |
| 378 | .rel.dtors 0 : { *(.rel.dtors) } |
| 379 | .rela.dtors 0 : { *(.rela.dtors) } |
| 380 | ${REL_SDATA} |
| 381 | ${REL_SBSS} |
| 382 | ${REL_SDATA2} |
| 383 | ${REL_SBSS2} |
| 384 | .rel.bss 0 : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) } |
| 385 | .rela.bss 0 : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) } |
| 386 | .rel.init_array 0 : { *(.rel.init_array) } |
| 387 | .rela.init_array 0 : { *(.rela.init_array) } |
| 388 | .rel.fini_array 0 : { *(.rel.fini_array) } |
| 389 | .rela.fini_array 0 : { *(.rela.fini_array) } |
| 390 | EOF |
| 391 | if [ -n "$COMBRELOC" ]; then |
| 392 | cat <<EOF |
| 393 | .rel.dyn 0 : |
| 394 | { |
| 395 | EOF |
| 396 | sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC |
| 397 | cat <<EOF |
| 398 | } |
| 399 | .rela.dyn 0 : |
| 400 | { |
| 401 | EOF |
| 402 | sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC |
| 403 | cat <<EOF |
| 404 | } |
| 405 | EOF |
| 406 | fi |
| 407 | cat <<EOF |
| 408 | .rel.plt 0 : { *(.rel.plt) } |
| 409 | .rela.plt 0 : { *(.rela.plt) } |
| 410 | ${OTHER_PLT_RELOC_SECTIONS} |
| 411 | .rel.other 0 : { *(.rel.*) } |
| 412 | .rela.other 0 : { *(.rela.*) } |
| 413 | .reli.other 0 : { *(.reli.*) } |
| 414 | } |
| 415 | EOF |