| 1 | # Copyright (C) 2014-2016 Free Software Foundation, Inc. |
| 2 | # |
| 3 | # Copying and distribution of this file, with or without modification, |
| 4 | # are permitted in any medium without royalty provided the copyright |
| 5 | # notice and this notice are preserved. |
| 6 | # |
| 7 | # Unusual variables checked by this code: |
| 8 | # NOP - four byte opcode for no-op (defaults to 0) |
| 9 | # NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not |
| 10 | # empty. |
| 11 | # SMALL_DATA_CTOR - .ctors contains small data. |
| 12 | # SMALL_DATA_DTOR - .dtors contains small data. |
| 13 | # DATA_ADDR - if end-of-text-plus-one-page isn't right for data start |
| 14 | # INITIAL_READONLY_SECTIONS - at start of text segment |
| 15 | # OTHER_READONLY_SECTIONS - other than .text .init .rodata ... |
| 16 | # (e.g., .PARISC.milli) |
| 17 | # OTHER_TEXT_SECTIONS - these get put in .text when relocating |
| 18 | # OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ... |
| 19 | # (e.g., .PARISC.global) |
| 20 | # OTHER_RELRO_SECTIONS - other than .data.rel.ro ... |
| 21 | # (e.g. PPC32 .fixup, .got[12]) |
| 22 | # OTHER_BSS_SECTIONS - other than .bss .sbss ... |
| 23 | # ATTRS_SECTIONS - at the end |
| 24 | # OTHER_SECTIONS - at the end |
| 25 | # EXECUTABLE_SYMBOLS - symbols that must be defined for an |
| 26 | # executable (e.g., _DYNAMIC_LINK) |
| 27 | # TEXT_START_ADDR - the first byte of the text segment, after any |
| 28 | # headers. |
| 29 | # TEXT_BASE_ADDRESS - the first byte of the text segment. |
| 30 | # TEXT_START_SYMBOLS - symbols that appear at the start of the |
| 31 | # .text section. |
| 32 | # DATA_START_SYMBOLS - symbols that appear at the start of the |
| 33 | # .data section. |
| 34 | # DATA_END_SYMBOLS - symbols that appear at the end of the |
| 35 | # writeable data sections. |
| 36 | # OTHER_GOT_SYMBOLS - symbols defined just before .got. |
| 37 | # OTHER_GOT_SECTIONS - sections just after .got. |
| 38 | # OTHER_SDATA_SECTIONS - sections just after .sdata. |
| 39 | # OTHER_BSS_SYMBOLS - symbols that appear at the start of the |
| 40 | # .bss section besides ___bss_start. |
| 41 | # DATA_PLT - .plt should be in data segment, not text segment. |
| 42 | # PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement. |
| 43 | # BSS_PLT - .plt should be in bss segment |
| 44 | # NO_REL_RELOCS - Don't include .rel.* sections in script |
| 45 | # NO_RELA_RELOCS - Don't include .rela.* sections in script |
| 46 | # NON_ALLOC_DYN - Place dynamic sections after data segment. |
| 47 | # TEXT_DYNAMIC - .dynamic in text segment, not data segment. |
| 48 | # EMBEDDED - whether this is for an embedded system. |
| 49 | # SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set |
| 50 | # start address of shared library. |
| 51 | # INPUT_FILES - INPUT command of files to always include |
| 52 | # WRITABLE_RODATA - if set, the .rodata section should be writable |
| 53 | # INIT_START, INIT_END - statements just before and just after |
| 54 | # combination of .init sections. |
| 55 | # FINI_START, FINI_END - statements just before and just after |
| 56 | # combination of .fini sections. |
| 57 | # STACK_ADDR - start of a .stack section. |
| 58 | # OTHER_SYMBOLS - symbols to place right at the end of the script. |
| 59 | # ETEXT_NAME - name of a symbol for the end of the text section, |
| 60 | # normally etext. |
| 61 | # SEPARATE_GOTPLT - if set, .got.plt should be separate output section, |
| 62 | # so that .got can be in the RELRO area. It should be set to |
| 63 | # the number of bytes in the beginning of .got.plt which can be |
| 64 | # in the RELRO area as well. |
| 65 | # USER_LABEL_PREFIX - prefix to add to user-visible symbols. |
| 66 | # |
| 67 | # When adding sections, do note that the names of some sections are used |
| 68 | # when specifying the start address of the next. |
| 69 | # |
| 70 | |
| 71 | # Many sections come in three flavours. There is the 'real' section, |
| 72 | # like ".data". Then there are the per-procedure or per-variable |
| 73 | # sections, generated by -ffunction-sections and -fdata-sections in GCC, |
| 74 | # and useful for --gc-sections, which for a variable "foo" might be |
| 75 | # ".data.foo". Then there are the linkonce sections, for which the linker |
| 76 | # eliminates duplicates, which are named like ".gnu.linkonce.d.foo". |
| 77 | # The exact correspondences are: |
| 78 | # |
| 79 | # Section Linkonce section |
| 80 | # .text .gnu.linkonce.t.foo |
| 81 | # .rodata .gnu.linkonce.r.foo |
| 82 | # .data .gnu.linkonce.d.foo |
| 83 | # .bss .gnu.linkonce.b.foo |
| 84 | # .sdata .gnu.linkonce.s.foo |
| 85 | # .sbss .gnu.linkonce.sb.foo |
| 86 | # .sdata2 .gnu.linkonce.s2.foo |
| 87 | # .sbss2 .gnu.linkonce.sb2.foo |
| 88 | # .debug_info .gnu.linkonce.wi.foo |
| 89 | # .tdata .gnu.linkonce.td.foo |
| 90 | # .tbss .gnu.linkonce.tb.foo |
| 91 | # .lrodata .gnu.linkonce.lr.foo |
| 92 | # .ldata .gnu.linkonce.l.foo |
| 93 | # .lbss .gnu.linkonce.lb.foo |
| 94 | # |
| 95 | # Each of these can also have corresponding .rel.* and .rela.* sections. |
| 96 | |
| 97 | |
| 98 | test -z "$ENTRY" && ENTRY=_start |
| 99 | test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} |
| 100 | test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} |
| 101 | if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi |
| 102 | test -z "${ELFSIZE}" && ELFSIZE=32 |
| 103 | test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" |
| 104 | test "$LD_FLAG" = "N" && DATA_ADDR=. |
| 105 | test -z "${ETEXT_NAME}" && ETEXT_NAME=etext |
| 106 | test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE="" |
| 107 | test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE="" |
| 108 | test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT |
| 109 | test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }" |
| 110 | DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" |
| 111 | DATA_SEGMENT_RELRO_END="" |
| 112 | DATA_SEGMENT_END="" |
| 113 | if test -n "${COMMONPAGESIZE}"; then |
| 114 | DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})" |
| 115 | DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" |
| 116 | DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);" |
| 117 | fi |
| 118 | if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then |
| 119 | INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }" |
| 120 | fi |
| 121 | if test -z "$PLT"; then |
| 122 | PLT=".plt ${RELOCATING-0} : { *(.plt) }" |
| 123 | fi |
| 124 | test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes |
| 125 | if test -z "$GOT"; then |
| 126 | if test -z "$SEPARATE_GOTPLT"; then |
| 127 | GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }" |
| 128 | else |
| 129 | GOT=".got ${RELOCATING-0} : { *(.got) }" |
| 130 | GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt) }" |
| 131 | fi |
| 132 | fi |
| 133 | DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }" |
| 134 | RODATA=".rodata ${RELOCATING+ADDR(.data)+SIZEOF(.data)} ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) } /*> INTERNAL_RAM*/" |
| 135 | DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }" |
| 136 | DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }" |
| 137 | if test -z "${NO_SMALL_DATA}"; then |
| 138 | SBSS=".sbss ${RELOCATING-0} : |
| 139 | { |
| 140 | ${RELOCATING+${SBSS_START_SYMBOLS}} |
| 141 | ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)} |
| 142 | *(.dynsbss) |
| 143 | *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*}) |
| 144 | *(.scommon) |
| 145 | ${RELOCATING+${SBSS_END_SYMBOLS}} |
| 146 | }" |
| 147 | SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }" |
| 148 | SDATA="/* We want the small data sections together, so single-instruction offsets |
| 149 | can access them all, and initialized data all before uninitialized, so |
| 150 | we can shorten the on-disk segment size. */ |
| 151 | .sdata ${RELOCATING-0} : |
| 152 | { |
| 153 | ${RELOCATING+${SDATA_START_SYMBOLS}} |
| 154 | ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)} |
| 155 | *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*}) |
| 156 | }" |
| 157 | SDATA2=".sdata2 ${RELOCATING-0} : |
| 158 | { |
| 159 | ${RELOCATING+${SDATA2_START_SYMBOLS}} |
| 160 | *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) |
| 161 | }" |
| 162 | REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) } |
| 163 | .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }" |
| 164 | REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) } |
| 165 | .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }" |
| 166 | REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) } |
| 167 | .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }" |
| 168 | REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) } |
| 169 | .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }" |
| 170 | else |
| 171 | NO_SMALL_DATA=" " |
| 172 | fi |
| 173 | if test -z "${DATA_GOT}"; then |
| 174 | if test -n "${NO_SMALL_DATA}"; then |
| 175 | DATA_GOT=" " |
| 176 | fi |
| 177 | fi |
| 178 | if test -z "${SDATA_GOT}"; then |
| 179 | if test -z "${NO_SMALL_DATA}"; then |
| 180 | SDATA_GOT=" " |
| 181 | fi |
| 182 | fi |
| 183 | test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" " |
| 184 | test "${LARGE_SECTIONS}" = "yes" && REL_LARGE=" |
| 185 | .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) } |
| 186 | .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) } |
| 187 | .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) } |
| 188 | .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) } |
| 189 | .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) } |
| 190 | .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }" |
| 191 | test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS=" |
| 192 | ${OTHER_BSS_SECTIONS} |
| 193 | .lbss ${RELOCATING-0} : |
| 194 | { |
| 195 | *(.dynlbss) |
| 196 | *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*}) |
| 197 | *(LARGE_COMMON) |
| 198 | }" |
| 199 | test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS=" |
| 200 | .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} : |
| 201 | { |
| 202 | *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*}) |
| 203 | } |
| 204 | .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} : |
| 205 | { |
| 206 | *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*}) |
| 207 | ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);} |
| 208 | }" |
| 209 | CTOR=".ctors ADDR(.text) + SIZEOF(.text) ${CONSTRUCTING-0} : |
| 210 | { |
| 211 | ${CONSTRUCTING+${CTOR_START}} |
| 212 | /* gcc uses crtbegin.o to find the start of |
| 213 | the constructors, so we make sure it is |
| 214 | first. Because this is a wildcard, it |
| 215 | doesn't matter if the user does not |
| 216 | actually link against crtbegin.o; the |
| 217 | linker won't look for a file to match a |
| 218 | wildcard. The wildcard also means that it |
| 219 | doesn't matter which directory crtbegin.o |
| 220 | is in. */ |
| 221 | |
| 222 | KEEP (*crtbegin.o(.ctors)) |
| 223 | KEEP (*crtbegin?.o(.ctors)) |
| 224 | |
| 225 | /* We don't want to include the .ctor section from |
| 226 | the crtend.o file until after the sorted ctors. |
| 227 | The .ctor section from the crtend file contains the |
| 228 | end of ctors marker and it must be last */ |
| 229 | |
| 230 | KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors)) |
| 231 | KEEP (*(SORT(.ctors.*))) |
| 232 | KEEP (*(.ctors)) |
| 233 | ${CONSTRUCTING+${CTOR_END}} |
| 234 | } /*> INTERNAL_RAM*/" |
| 235 | DTOR=".dtors ADDR(.ctors) + SIZEOF(.ctors) ${CONSTRUCTING-0} : |
| 236 | { |
| 237 | ${CONSTRUCTING+${DTOR_START}} |
| 238 | KEEP (*crtbegin.o(.dtors)) |
| 239 | KEEP (*crtbegin?.o(.dtors)) |
| 240 | KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors)) |
| 241 | KEEP (*(SORT(.dtors.*))) |
| 242 | KEEP (*(.dtors)) |
| 243 | ${CONSTRUCTING+${DTOR_END}} |
| 244 | } /*> INTERNAL_RAM*/ " |
| 245 | STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} : |
| 246 | { |
| 247 | ${RELOCATING+___stack = .;} |
| 248 | *(.stack) |
| 249 | }" |
| 250 | |
| 251 | # If this is for an embedded system, don't add SIZEOF_HEADERS. |
| 252 | if [ -z "$EMBEDDED" ]; then |
| 253 | test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS" |
| 254 | else |
| 255 | test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" |
| 256 | fi |
| 257 | |
| 258 | cat <<EOF |
| 259 | /* Copyright (C) 2014-2016 Free Software Foundation, Inc. |
| 260 | |
| 261 | Copying and distribution of this script, with or without modification, |
| 262 | are permitted in any medium without royalty provided the copyright |
| 263 | notice and this notice are preserved. */ |
| 264 | |
| 265 | OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", |
| 266 | "${LITTLE_OUTPUT_FORMAT}") |
| 267 | OUTPUT_ARCH(${OUTPUT_ARCH}) |
| 268 | ${RELOCATING+ENTRY(${ENTRY})} |
| 269 | |
| 270 | ${RELOCATING+${EXECUTABLE_SYMBOLS}} |
| 271 | ${RELOCATING+${INPUT_FILES}} |
| 272 | ${RELOCATING- /* For some reason, the Solaris linker makes bad executables |
| 273 | if gld -r is used and the intermediate file has sections starting |
| 274 | at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld |
| 275 | bug. But for now assigning the zero vmas works. */} |
| 276 | |
| 277 | |
| 278 | |
| 279 | /* BSP specific*/ |
| 280 | __PROG_SIZE_FOR_CORE__ = 1M; |
| 281 | __HEAP_SIZE_FOR_CORE__ = 1M; |
| 282 | |
| 283 | __MAX_NUM_CORES_IN_ROWS__ = 4; |
| 284 | __MAX_NUM_CORES_IN_COLS__ = 4; |
| 285 | |
| 286 | __FIRST_CORE_ROW_ = 0x20; |
| 287 | __FIRST_CORE_COL_ = 0x24; |
| 288 | |
| 289 | |
| 290 | |
| 291 | PROVIDE (__CORE_ROW_ = __FIRST_CORE_ROW_); |
| 292 | PROVIDE (__CORE_COL_ = __FIRST_CORE_COL_); |
| 293 | /* generic don't touch */ |
| 294 | /* used to calculated the slice address in the external memory*/ |
| 295 | __CORE_NUM_ = (__CORE_ROW_ - __FIRST_CORE_ROW_ )* __MAX_NUM_CORES_IN_COLS__ + (__CORE_COL_ - __FIRST_CORE_COL_ ) ; |
| 296 | |
| 297 | |
| 298 | MEMORY |
| 299 | { |
| 300 | EXTERNAL_DRAM_0 (WXAI) : ORIGIN = 0x80000000, LENGTH = 0x1000000 /*.text, data, rodata, bss and .stack*/ |
| 301 | EXTERNAL_DRAM_1 (WXAI) : ORIGIN = 0x81000000, LENGTH = 0x1000000 /*.heap */ |
| 302 | |
| 303 | EXTERNAL_SRAM (WXAI) : ORIGIN = 0x92000000, LENGTH = 8K /* small external RAM, used for testing*/ |
| 304 | |
| 305 | /* run time lib and crt0*/ |
| 306 | RESERVED_CRT0_RAM (WXAI) : ORIGIN = 0, LENGTH = 0x400 |
| 307 | |
| 308 | /* user program, per bank usage */ |
| 309 | BANK0_SRAM (WXAI) : ORIGIN = LENGTH(RESERVED_CRT0_RAM), LENGTH = 8K - LENGTH(RESERVED_CRT0_RAM) |
| 310 | BANK1_SRAM (WXAI) : ORIGIN = 0x2000, LENGTH = 8K |
| 311 | BANK2_SRAM (WXAI) : ORIGIN = 0x4000, LENGTH = 8K |
| 312 | BANK3_SRAM (WXAI) : ORIGIN = 0x6000, LENGTH = 8K |
| 313 | |
| 314 | /* user program, continious placement */ |
| 315 | INTERNAL_RAM (WXAI) : ORIGIN = LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K - LENGTH(RESERVED_CRT0_RAM) |
| 316 | |
| 317 | MMR (WAI) : ORIGIN = 0xF000, LENGTH = 32K |
| 318 | |
| 319 | /* multi cores space */ |
| 320 | CORE_0x20_0x24_INTERNAL_RAM : ORIGIN = 0x82400000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 321 | CORE_0x20_0x25_INTERNAL_RAM : ORIGIN = 0x82500000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 322 | CORE_0x20_0x26_INTERNAL_RAM : ORIGIN = 0x82600000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 323 | CORE_0x20_0x27_INTERNAL_RAM : ORIGIN = 0x82700000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 324 | CORE_0x21_0x24_INTERNAL_RAM : ORIGIN = 0x86400000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 325 | CORE_0x21_0x25_INTERNAL_RAM : ORIGIN = 0x86500000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 326 | CORE_0x21_0x26_INTERNAL_RAM : ORIGIN = 0x86600000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 327 | CORE_0x21_0x27_INTERNAL_RAM : ORIGIN = 0x86700000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 328 | CORE_0x22_0x24_INTERNAL_RAM : ORIGIN = 0x8a400000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 329 | CORE_0x22_0x25_INTERNAL_RAM : ORIGIN = 0x8a500000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 330 | CORE_0x22_0x26_INTERNAL_RAM : ORIGIN = 0x8a600000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 331 | CORE_0x22_0x27_INTERNAL_RAM : ORIGIN = 0x8a700000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 332 | CORE_0x23_0x24_INTERNAL_RAM : ORIGIN = 0x8e400000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 333 | CORE_0x23_0x25_INTERNAL_RAM : ORIGIN = 0x8e500000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 334 | CORE_0x23_0x26_INTERNAL_RAM : ORIGIN = 0x8e600000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 335 | CORE_0x23_0x27_INTERNAL_RAM : ORIGIN = 0x8e700000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 336 | CORE_0x24_0x24_INTERNAL_RAM : ORIGIN = 0x82000000+LENGTH(RESERVED_CRT0_RAM), LENGTH = 32K- LENGTH(RESERVED_CRT0_RAM) |
| 337 | |
| 338 | } |
| 339 | |
| 340 | |
| 341 | SECTIONS |
| 342 | { |
| 343 | |
| 344 | IVT 0 : {*.o(IVT) } > RESERVED_CRT0_RAM |
| 345 | RESERVED_CRT0 : {*.o(RESERVED_CRT0) } > RESERVED_CRT0_RAM |
| 346 | RESERVED_CRT0 : {*.o(reserved_crt0) } > RESERVED_CRT0_RAM |
| 347 | |
| 348 | CORE_RAM_0 : {*.o(core_ram_0) } > BANK0_SRAM |
| 349 | CORE_RAM_1 : {*.o(core_ram_1) } > BANK1_SRAM |
| 350 | CORE_RAM_2 : {*.o(core_ram_2) } > BANK2_SRAM |
| 351 | CORE_RAM_3 : {*.o(core_ram_3) } > BANK3_SRAM |
| 352 | |
| 353 | SRAM_SOUTH : {*.o(sram) } > EXTERNAL_SRAM |
| 354 | DRAM_WEST : {*.o(dram) } > EXTERNAL_DRAM_1 |
| 355 | |
| 356 | CORE_INTERNAL : {*.o(core_ram_internal) } /*> INTERNAL_RAM*/ |
| 357 | |
| 358 | /* the newlib (libc and libm) library is maped to the dedicated section */ |
| 359 | |
| 360 | __new_lib_start_external_ = ( ORIGIN(EXTERNAL_DRAM_0) + __PROG_SIZE_FOR_CORE__ *__CORE_NUM_ ); |
| 361 | __new_lib_start_ = DEFINED(__USE_INTERNAL_MEM_FOR_NEW_LIB_) ? ORIGIN(BANK1_SRAM) : __new_lib_start_external_ ; |
| 362 | |
| 363 | NEW_LIB_RO ${RELOCATING+__new_lib_start_} : { lib_a-*.o(.text .rodata ) *.o(libgloss_epiphany) } /* > INTERNAL_RAM*/ |
| 364 | GNU_C_BUILTIN_LIB_RO ADDR(NEW_LIB_RO) + SIZEOF(NEW_LIB_RO) : { |
| 365 | *mulsi3.o(.text .rodata) *modsi3.o(.text .rodata) |
| 366 | *divsi3.o(.text .rodata) *udivsi3.o(.text .rodata) |
| 367 | *umodsi3.o(.text .rodata) _*.o(.text .rodata) |
| 368 | } |
| 369 | |
| 370 | NEW_LIB_WR ADDR(GNU_C_BUILTIN_LIB_RO) + SIZEOF(GNU_C_BUILTIN_LIB_RO) : { lib_a-*.o(.data ) } /* > INTERNAL_RAM*/ |
| 371 | |
| 372 | |
| 373 | __init_start = DEFINED(__USE_INTERNAL_MEM_) ? ORIGIN(BANK1_SRAM) : (ADDR(NEW_LIB_WR) + SIZEOF(NEW_LIB_WR) ) ; |
| 374 | __init_start = DEFINED(__USE_INTERNAL_MEM_FOR_NEW_LIB_) ? ADDR(NEW_LIB_WR) + SIZEOF(NEW_LIB_WR) : __init_start; |
| 375 | |
| 376 | |
| 377 | /* Read-only sections, merged into text segment: */ |
| 378 | /*${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}*/ |
| 379 | ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} |
| 380 | ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} |
| 381 | ${INITIAL_READONLY_SECTIONS} |
| 382 | .note.gnu.build-id : { *(.note.gnu.build-id) } |
| 383 | EOF |
| 384 | |
| 385 | test -n "${RELOCATING+0}" || unset NON_ALLOC_DYN |
| 386 | test -z "${NON_ALLOC_DYN}" || TEXT_DYNAMIC= |
| 387 | cat > ldscripts/dyntmp.$$ <<EOF |
| 388 | ${TEXT_DYNAMIC+${DYNAMIC}} |
| 389 | .hash ${RELOCATING-0} : { *(.hash) } |
| 390 | .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) } |
| 391 | .dynsym ${RELOCATING-0} : { *(.dynsym) } |
| 392 | .dynstr ${RELOCATING-0} : { *(.dynstr) } |
| 393 | .gnu.version ${RELOCATING-0} : { *(.gnu.version) } |
| 394 | .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) } |
| 395 | .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) } |
| 396 | EOF |
| 397 | |
| 398 | if [ "x$COMBRELOC" = x ]; then |
| 399 | COMBRELOCCAT="cat >> ldscripts/dyntmp.$$" |
| 400 | else |
| 401 | COMBRELOCCAT="cat > $COMBRELOC" |
| 402 | fi |
| 403 | eval $COMBRELOCCAT <<EOF |
| 404 | .rel.init ${RELOCATING-0} : { *(.rel.init) } |
| 405 | .rela.init ${RELOCATING-0} : { *(.rela.init) } |
| 406 | .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) } |
| 407 | .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) } |
| 408 | .rel.fini ${RELOCATING-0} : { *(.rel.fini) } |
| 409 | .rela.fini ${RELOCATING-0} : { *(.rela.fini) } |
| 410 | .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) } |
| 411 | .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) } |
| 412 | ${OTHER_READONLY_RELOC_SECTIONS} |
| 413 | .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) } |
| 414 | .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) } |
| 415 | .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) } |
| 416 | .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) } |
| 417 | .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) } |
| 418 | .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) } |
| 419 | .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) } |
| 420 | .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) } |
| 421 | .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) } |
| 422 | .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) } |
| 423 | .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) } |
| 424 | .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) } |
| 425 | .rel.got ${RELOCATING-0} : { *(.rel.got) } |
| 426 | .rela.got ${RELOCATING-0} : { *(.rela.got) } |
| 427 | ${OTHER_GOT_RELOC_SECTIONS} |
| 428 | ${REL_SDATA} |
| 429 | ${REL_SBSS} |
| 430 | ${REL_SDATA2} |
| 431 | ${REL_SBSS2} |
| 432 | .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) } |
| 433 | .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) } |
| 434 | ${REL_LARGE} |
| 435 | EOF |
| 436 | |
| 437 | if [ -n "$COMBRELOC" ]; then |
| 438 | cat >> ldscripts/dyntmp.$$ <<EOF |
| 439 | .rel.dyn ${RELOCATING-0} : |
| 440 | { |
| 441 | EOF |
| 442 | sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$ |
| 443 | cat >> ldscripts/dyntmp.$$ <<EOF |
| 444 | } |
| 445 | .rela.dyn ${RELOCATING-0} : |
| 446 | { |
| 447 | EOF |
| 448 | sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC >> ldscripts/dyntmp.$$ |
| 449 | cat >> ldscripts/dyntmp.$$ <<EOF |
| 450 | } |
| 451 | EOF |
| 452 | fi |
| 453 | |
| 454 | cat >> ldscripts/dyntmp.$$ <<EOF |
| 455 | .rel.plt ${RELOCATING-0} : { *(.rel.plt) } |
| 456 | .rela.plt ${RELOCATING-0} : { *(.rela.plt) } |
| 457 | ${OTHER_PLT_RELOC_SECTIONS} |
| 458 | EOF |
| 459 | |
| 460 | if test -z "${NON_ALLOC_DYN}"; then |
| 461 | if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then |
| 462 | cat ldscripts/dyntmp.$$ |
| 463 | else |
| 464 | if test -z "${NO_REL_RELOCS}"; then |
| 465 | sed -e '/^[ ]*\.rela\.[^}]*$/,/}/d' -e '/^[ ]*\.rela\./d' ldscripts/dyntmp.$$ |
| 466 | fi |
| 467 | if test -z "${NO_RELA_RELOCS}"; then |
| 468 | sed -e '/^[ ]*\.rel\.[^}]*$/,/}/d' -e '/^[ ]*\.rel\./d' ldscripts/dyntmp.$$ |
| 469 | fi |
| 470 | fi |
| 471 | rm -f ldscripts/dyntmp.$$ |
| 472 | fi |
| 473 | |
| 474 | cat <<EOF |
| 475 | |
| 476 | .init __init_start : |
| 477 | { |
| 478 | ${RELOCATING+${INIT_START}} |
| 479 | KEEP (*(.init)) |
| 480 | ${RELOCATING+${INIT_END}} |
| 481 | } /*> INTERNAL_RAM*/ =${NOP-0} |
| 482 | |
| 483 | ${TEXT_PLT+${PLT}} |
| 484 | ${TINY_READONLY_SECTION} |
| 485 | |
| 486 | .fini ${RELOCATING+ADDR(.init)+SIZEOF(.init)} ${RELOCATING-0} : |
| 487 | { |
| 488 | ${RELOCATING+${FINI_START}} |
| 489 | KEEP (*(.fini)) |
| 490 | ${RELOCATING+${FINI_END}} |
| 491 | } /*> INTERNAL_RAM*/ =${NOP-0} |
| 492 | |
| 493 | .text ${RELOCATING+ADDR(.fini)+SIZEOF(.fini)} ${RELOCATING-0} : |
| 494 | { |
| 495 | ${RELOCATING+${TEXT_START_SYMBOLS}} |
| 496 | *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*}) |
| 497 | /* .gnu.warning sections are handled specially by elf32.em. */ |
| 498 | *(.gnu.warning) |
| 499 | ${RELOCATING+${OTHER_TEXT_SECTIONS}} |
| 500 | } /*> INTERNAL_RAM */ =${NOP-0} |
| 501 | |
| 502 | ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);} |
| 503 | ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);} |
| 504 | ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);} |
| 505 | ${WRITABLE_RODATA-${RODATA}} |
| 506 | .rodata1 ${RELOCATING-0} : { *(.rodata1) } |
| 507 | ${CREATE_SHLIB-${SDATA2}} |
| 508 | ${CREATE_SHLIB-${SBSS2}} |
| 509 | ${OTHER_READONLY_SECTIONS} |
| 510 | .eh_frame_hdr : { *(.eh_frame_hdr) } |
| 511 | .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) } |
| 512 | .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) } |
| 513 | |
| 514 | /* Adjust the address for the data segment. We want to adjust up to |
| 515 | the same address within the page on the next page up. */ |
| 516 | ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}} |
| 517 | ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} |
| 518 | ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} |
| 519 | |
| 520 | /* Exception handling */ |
| 521 | .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) } |
| 522 | .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) } |
| 523 | |
| 524 | /* Thread Local Storage sections */ |
| 525 | .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } |
| 526 | .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} } |
| 527 | |
| 528 | .preinit_array ${RELOCATING-0} : |
| 529 | { |
| 530 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}} |
| 531 | KEEP (*(.preinit_array)) |
| 532 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}} |
| 533 | } |
| 534 | .init_array ${RELOCATING-0} : |
| 535 | { |
| 536 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}} |
| 537 | KEEP (*(SORT(.init_array.*))) |
| 538 | KEEP (*(.init_array)) |
| 539 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}} |
| 540 | } |
| 541 | .fini_array ${RELOCATING-0} : |
| 542 | { |
| 543 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}} |
| 544 | KEEP (*(.fini_array)) |
| 545 | KEEP (*(SORT(.fini_array.*))) |
| 546 | ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}} |
| 547 | } |
| 548 | ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}} |
| 549 | ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}} |
| 550 | .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) } |
| 551 | |
| 552 | ${RELOCATING+${DATARELRO}} |
| 553 | ${OTHER_RELRO_SECTIONS} |
| 554 | ${TEXT_DYNAMIC-${DYNAMIC}} |
| 555 | ${DATA_GOT+${RELRO_NOW+${GOT}}} |
| 556 | ${DATA_GOT+${RELRO_NOW+${GOTPLT}}} |
| 557 | ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}} |
| 558 | ${RELOCATING+${DATA_SEGMENT_RELRO_END}} |
| 559 | ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}} |
| 560 | ${DATA_GOT+${RELRO_NOW-${GOTPLT}}} |
| 561 | |
| 562 | ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}} |
| 563 | |
| 564 | .data ${RELOCATING+ADDR(.dtors)+SIZEOF(.dtors)} ${RELOCATING-0} : |
| 565 | { |
| 566 | ${RELOCATING+${DATA_START_SYMBOLS}} |
| 567 | *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*}) |
| 568 | ${CONSTRUCTING+SORT(CONSTRUCTORS)} |
| 569 | } /*> INTERNAL_RAM*/ |
| 570 | .data1 ${RELOCATING-0} : { *(.data1) } |
| 571 | ${WRITABLE_RODATA+${RODATA}} |
| 572 | ${OTHER_READWRITE_SECTIONS} |
| 573 | ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}} |
| 574 | ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}} |
| 575 | ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}} |
| 576 | ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}} |
| 577 | ${SDATA_GOT+${GOT}} |
| 578 | ${SDATA_GOT+${OTHER_GOT_SECTIONS}} |
| 579 | ${SDATA} |
| 580 | ${OTHER_SDATA_SECTIONS} |
| 581 | ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}} |
| 582 | /* Align ___bss_start and _end to a multiple of 8 so that we can use strd |
| 583 | to clear bss. N.B., without adding any extra alignment, we would have |
| 584 | to clear the bss byte by byte. */ |
| 585 | ${RELOCATING+. = ALIGN(8);} |
| 586 | ${RELOCATING+___bss_start = .;} |
| 587 | ${RELOCATING+${OTHER_BSS_SYMBOLS}} |
| 588 | ${SBSS} |
| 589 | ${BSS_PLT+${PLT}} |
| 590 | .bss ${RELOCATING+ADDR(.rodata)+SIZEOF(.rodata)} ${RELOCATING-0} : |
| 591 | { |
| 592 | *(.dynbss) |
| 593 | *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*}) |
| 594 | *(COMMON) |
| 595 | /* Align here to ensure that the .bss section occupies space up to |
| 596 | _end. Align after .bss to ensure correct alignment even if the |
| 597 | .bss section disappears because there are no input sections. |
| 598 | FIXME: Why do we need it? When there is no .bss section, we don't |
| 599 | pad the .data section. */ |
| 600 | ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);} |
| 601 | } /*> INTERNAL_RAM*/ |
| 602 | ${OTHER_BSS_SECTIONS} |
| 603 | ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} |
| 604 | ${RELOCATING+. = ALIGN(${ALIGNMENT});} |
| 605 | ${LARGE_SECTIONS} |
| 606 | ${RELOCATING+. = ALIGN(${ALIGNMENT});} |
| 607 | ${RELOCATING+. = ALIGN(8);} |
| 608 | ${RELOCATING+${OTHER_END_SYMBOLS}} |
| 609 | ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}} |
| 610 | ${RELOCATING+${DATA_SEGMENT_END}} |
| 611 | EOF |
| 612 | |
| 613 | if test -n "${NON_ALLOC_DYN}"; then |
| 614 | if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then |
| 615 | cat ldscripts/dyntmp.$$ |
| 616 | else |
| 617 | if test -z "${NO_REL_RELOCS}"; then |
| 618 | sed -e '/^[ ]*\.rela\.[^}]*$/,/}/d' -e '/^[ ]*\.rela\./d' ldscripts/dyntmp.$$ |
| 619 | fi |
| 620 | if test -z "${NO_RELA_RELOCS}"; then |
| 621 | sed -e '/^[ ]*\.rel\.[^}]*$/,/}/d' -e '/^[ ]*\.rel\./d' ldscripts/dyntmp.$$ |
| 622 | fi |
| 623 | fi |
| 624 | rm -f ldscripts/dyntmp.$$ |
| 625 | fi |
| 626 | |
| 627 | cat <<EOF |
| 628 | /* Stabs debugging sections. */ |
| 629 | .stab 0 : { *(.stab) } |
| 630 | .stabstr 0 : { *(.stabstr) } |
| 631 | .stab.excl 0 : { *(.stab.excl) } |
| 632 | .stab.exclstr 0 : { *(.stab.exclstr) } |
| 633 | .stab.index 0 : { *(.stab.index) } |
| 634 | .stab.indexstr 0 : { *(.stab.indexstr) } |
| 635 | |
| 636 | .comment 0 : { *(.comment) } |
| 637 | |
| 638 | EOF |
| 639 | |
| 640 | . $srcdir/scripttempl/DWARF.sc |
| 641 | |
| 642 | cat <<EOF |
| 643 | ${TINY_DATA_SECTION} |
| 644 | ${TINY_BSS_SECTION} |
| 645 | |
| 646 | /*${STACK_ADDR+${STACK}}*/ |
| 647 | |
| 648 | PROVIDE ( __stack_start_ = ORIGIN(EXTERNAL_DRAM_0) + __PROG_SIZE_FOR_CORE__ * __CORE_NUM_ + __PROG_SIZE_FOR_CORE__ - 0x10) ; |
| 649 | .stack ${RELOCATING+__stack_start_} : { ___stack = .; *(.stack) } |
| 650 | |
| 651 | PROVIDE ( ___heap_start = ORIGIN(EXTERNAL_DRAM_1) + __HEAP_SIZE_FOR_CORE__ * __CORE_NUM_ ); |
| 652 | /*.heap_start __heap_start_ : { _heap_start_ = .; *(.heap_start) }*/ |
| 653 | |
| 654 | PROVIDE ( ___heap_end = ORIGIN(EXTERNAL_DRAM_1) + __HEAP_SIZE_FOR_CORE__ * __CORE_NUM_ + __HEAP_SIZE_FOR_CORE__ - 4 ); |
| 655 | |
| 656 | |
| 657 | /* .heap_end __heap_end_ : { _heap_end_ = .; *(.heap_end) }*/ |
| 658 | |
| 659 | |
| 660 | ${ATTRS_SECTIONS} |
| 661 | ${OTHER_SECTIONS} |
| 662 | ${RELOCATING+${OTHER_SYMBOLS}} |
| 663 | ${RELOCATING+${DISCARDED}} |
| 664 | } |
| 665 | EOF |