projects / deliverable / binutils-gdb.git / blame_incremental
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (non-incremental) | history | HEAD
2009-11-12 H.J. Lu <hongjiu.lu@intel.com>
[deliverable/binutils-gdb.git] / opcodes / ChangeLog
... / ...
CommitLineData
12009-11-12 H.J. Lu <hongjiu.lu@intel.com>
2
3 * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
4 or, sbb, sub, xor and xchg with register only operands.
5 * i386-tbl.h: Regenerated.
6
72009-11-12 H.J. Lu <hongjiu.lu@intel.com>
8
9 * i386-gen.c (opcode_modifiers): Add IsLockable.
10
11 * i386-opc.h (IsLockable): New.
12 (i386_opcode_modifier): Add islockable.
13
14 * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
15 bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
16 xor, xadd and xchg.
17 * i386-tbl.h: Regenerated.
18
192009-11-12 Daniel Jacobowitz <dan@codesourcery.com>
20
21 * arm-dis.c (coprocessor_opcodes): Use %A instead of %C. Remove
22 generic coprocessor instructions for FPA loads and stores.
23 (print_insn_coprocessor): Remove %C support. Display address for
24 PC-relative offsets in %A.
25
262009-11-11 H.J. Lu <hongjiu.lu@intel.com>
27
28 * i386-dis.c (all_prefixes): New.
29 (ckprefix): Set all_prefixes.
30 (print_insn): Print all_prefixes instead of lock_prefix,
31 repz_prefix, repnz_prefix, addr_prefix and data_prefix.
32
332009-11-11 Nick Clifton <nickc@redhat.com>
34
35 PR binutils/10924
36 * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
37 (print_insn_arm): Extend %s format control code to check for
38 unpredictable addressing modes. Add support for %S format control
39 code which suppresses this check.
40 (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
41 (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
42 PRE_BIT_SET): New macros.
43 (print_insn_coprocessor): Use the new macros instead of magic
44 constants.
45 (print_arm_address): Likewise.
46 (pirnt_insn_arm): Likewise.
47 (print_insn_thumb32): Likewise.
48
492009-11-11 Nick Clifton <nickc@redhat.com>
50
51 * po/id.po: Updated Indonesian translation.
52
532009-11-10 Maxim Kuvyrkov <maxim@codesourcery.com>
54
55 * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
56
572009-11-06 Sebastian Pop <sebastian.pop@amd.com>
58
59 * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
60 reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
61 B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
62 the xop_table.
63 (get_valid_dis386): Removed unused condition (from cut/n/paste) for
64 XOP instructions.
65
662009-11-05 Sebastian Pop <sebastian.pop@amd.com>
67 Quentin Neill <quentin.neill@amd.com>
68
69 * opcodes/i386-dis.c (OP_LWPCB_E): New.
70 (OP_LWP_E): New.
71 (OP_LWP_I): New.
72 (USE_XOP_8F_TABLE): New.
73 (XOP_8F_TABLE): New.
74 (REG_XOP_LWPCB): New.
75 (REG_XOP_LWP): New.
76 (XOP_09): New.
77 (XOP_0A): New.
78 (reg_table): Redirect REG_8F to XOP_8F_TABLE.
79 Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
80 (xop_table): New.
81 (get_valid_dis386): Handle USE_XOP_8F_TABLE.
82 Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
83 to access to the vex_table.
84 (OP_LWPCB_E): New.
85 (OP_LWP_E): New.
86 (OP_LWP_I): New.
87 * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
88 (cpu_flags): Add CpuLWP.
89 (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
90 * opcodes/i386-opc.h (CpuLWP): New.
91 (i386_cpu_flags): Add bit cpulwp.
92 (VexLWP): New.
93 (XOP09): New.
94 (XOP0A): New.
95 (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
96 * opcodes/i386-opc.tbl (llwpcb): Added.
97 (lwpval): Added.
98 (lwpins): Added.
99
1002009-11-04 DJ Delorie <dj@redhat.com>
101
102 * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
103 (mvtcp, mvfcp, opecp): Remove.
104 * rx-decode.c: Regenerate.
105 * rx-dis.c (cpen): Remove.
106
1072009-11-03 Doug Evans <dje@sebabeach.org>
108
109 * m32c-desc.c: Regenerate.
110 * mep-desc.c: Regenerate.
111
1122009-11-02 Paul Brook <paul@codesourcery.com>
113
114 * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
115 Add VFPv4 instructions.
116
1172009-10-29 Sebastian Pop <sebastian.pop@amd.com>
118
119 * i386-dis.c (OP_VEX_FMA): Removed.
120 (VexFMA): Removed.
121 (Vex128FMA): Removed.
122 (prefix_table): First source operand of FMA4 insns is decoded
123 with Vex not with VexFMA.
124 (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
125 when vex.w is set. Third source operand is decoded with
126
1272009-10-27 Alan Modra <amodra@bigpond.net.au>
128
129 * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
130 * Makefile.in: Regenerate.
131 * po/POTFILES.in: Regenerate.
132
1332009-10-23 Doug Evans <dje@sebabeach.org>
134
135 * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
136 * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
137 * cgen-bitset.c: Update.
138 * fr30-desc.h: Regenerate.
139 * frv-desc.h: Regenerate.
140 * ip2k-desc.h: Regenerate.
141 * iq2000-desc.h: Regenerate.
142 * lm32-desc.h: Regenerate.
143 * m32c-desc.h: Regenerate.
144 * m32c-opc.h: Regenerate.
145 * m32r-desc.h: Regenerate.
146 * mep-desc.h: Regenerate.
147 * mt-desc.h: Regenerate.
148 * openrisc-desc.h: Regenerate.
149 * xc16x-desc.h: Regenerate.
150 * xstormy16-desc.h: Regenerate.
151
1522009-10-22 DJ Delorie <dj@redhat.com>
153
154 * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
155 * rx-decode.c: Regenerated.
156
1572009-10-20 H.J. Lu <hongjiu.lu@intel.com>
158
159 PR gas/10775
160 * i386-dis.c: Document LB, LS and LV macros.
161 (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
162 with the 64-bit displacement or immediate operand.
163 (putop): Handle LB, LS and LV macros.
164
1652009-10-18 Doug Evans <dje@sebabeach.org>
166
167 * lm32-opinst.c: Regenerate.
168 * m32c-desc.c: Regenerate.
169 * m32r-opinst.c: Regenerate.
170 * openrisc-ibld.c: Regenerate.
171 * xc16x-desc.c: Regenerate.
172 * xc16x-desc.h: Regenerate.
173
1742009-10-17 Doug Evans <dje@sebabeach.org>
175
176 * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
177 (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
178 sorted alphabetically.
179 (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
180 stamp-* rules are sorted alphabetically.
181 * Makefile.in: Regenerate.
182
1832009-10-16 H.J. Lu <hongjiu.lu@intel.com>
184
185 * i386-opc.h: Use enum instead of nested macros.
186
1872009-10-16 H.J. Lu <hongjiu.lu@intel.com>
188
189 * i386-dis.c: Simplify enums.
190
1912009-10-15 H.J. Lu <hongjiu.lu@intel.com>
192 Ineiev <ineiev@gmail.com>
193
194 PR binutils/10767
195 * i386-dis.c: Use enum instead of nested macros.
196
1972009-10-15 H.J. Lu <hongjiu.lu@intel.com>
198
199 * i386-dis.c (MAX_BYTEMODE): Removed.
200
2012009-10-14 Tomas Hurka <tom@hukatronic.cz>
202
203 PR 969
204 * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
205
2062009-10-13 H.J. Lu <hongjiu.lu@intel.com>
207
208 * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
209 and vex_w_done.
210
2112009-10-07 Michael Eager <eager@eagercon.com>
212
213 * microblaze-dis.c: Add include for microblaze-dis.h,
214 eliminate local extern decls.
215 * microblaze-dis.h: New.
216
2172009-10-06 Nick Clifton <nickc@redhat.com>
218
219 * po/fi.po: Updated Finnish translation.
220
2212009-10-03 Andreas Schwab <schwab@linux-m68k.org>
222
223 * opc2c.c: Include "libiberty.h" and <errno.h>.
224 (orig_filename): Constify.
225 (dump_lines): Fix line number directive.
226 (main): Set orig_filename to basename of input file. Use
227 xstrerror.
228
229 * Makefile.am (rx-dis.lo): Remove explicit dependencies.
230 ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD)
231 instead of $(EXEEXT).
232 (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
233 $(LINK_FOR_BUILD). Link with libiberty.
234 (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
235 (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
236 * Makefile.in: Regenerated.
237 * rx-decode.c: Regenerated.
238
2392009-10-03 Paul Reed <paulreed@paddedcell.com>
240
241 * arm-dis.c (print_insn): Check symtab_size not *symtab.
242
2432009-10-02 H.J. Lu <hongjiu.lu@intel.com>
244
245 * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
246 * i386-tbl.h: Regenerated.
247
2482009-10-02 Peter Bergner <bergner@vnet.ibm.com>
249
250 * ppc-dis.c (ppc_opts): Add "476" entry.
251 * ppc-opc.c (PPC476): Define.
252 (powerpc_opcodes): Update mnemonics where required for 476.
253
2542009-10-01 Peter Bergner <bergner@vnet.ibm.com>
255
256 * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
257 * ppc-dis.c (ppc_opts): Likewise.
258 Rename "ppca2" to "a2".
259
2602009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
261
262 * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
263
2642009-09-29 DJ Delorie <dj@redhat.com>
265
266 * Makefile.am: Add RX files.
267 * configure.in: Add support for RX target.
268 * disassemble.c: Likewise.
269 * Makefile.in: Regenerate.
270 * configure: Regenerate.
271 * opc2c.c: New file.
272 * rx-decode.c: New file.
273 * rx-decode.opc: New file.
274 * rx-dis.c: New file.
275
2762009-09-29 Peter Bergner <bergner@vnet.ibm.com>
277
278 * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
279 "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
280
2812009-09-25 Michael Eager <eager@eagercon.com>
282
283 * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
284 microblaze_decode_insn): Add declarations.
285 (get_delay_slots_microblaze): Remove.
286
2872009-09-25 Martin Thuresson <martint@google.com>
288
289 Update sources to make arc and arm targets compile cleanly with
290 -Wc++-compat:
291 * arc-dis.c Fix casts.
292 * arc-ext.c: Add casts.
293 * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
294 enum.
295
2962009-09-24 H.J. Lu <hongjiu.lu@intel.com>
297
298 * i386-gen.c (opcode_modifiers): Remove Vex256.
299 (set_bitfield): Handle XXX=V.
300
301 * i386-opc.h (Vex): Update comments.
302 (Vex256): Removed.
303 (VexNDS): Updated.
304 (i386_opcode_modifier): Change vex to 2 bits. Remove vex256.
305
306 * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
307 * i386-tbl.h: Regenerated.
308
3092009-09-23 Nick Clifton <nickc@redhat.com>
310
311 * po/fr.po: Updated French translation.
312
3132009-09-21 Ben Elliston <bje@au.ibm.com>
314 Peter Bergner <bergner@vnet.ibm.com>
315
316 * ppc-dis.c (ppc_opts): Add "ppca2" entry.
317 * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
318 eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
319 icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
320 ici mnemonics.
321 (ERAT_T): New operand.
322 (XWC_MASK): New mask.
323 (XOPL2): New macro.
324 (PPCA2): Define.
325
3262009-09-18 Nick Clifton <nickc@redhat.com>
327
328 * po/es.po: Updated Spanish translation.
329 * po/vi.po: Updated Vietnamese translation.
330
3312009-09-15 H.J. Lu <hongjiu.lu@intel.com>
332
333 * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
334 disp == -disp.
335
3362009-09-14 Nick Clifton <nickc@redhat.com>
337
338 * po/nl.po: Updated Dutch translation.
339
3402009-09-11 Nick Clifton <nickc@redhat.com>
341
342 * po/opcodes.pot: Updated by the Translation project.
343
3442009-09-11 Martin Thuresson <martint@google.com>
345
346 Updated sources to compile cleanly with -Wc++-compat:
347 * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
348 * ldcref.c: Add casts.
349 * ldctor.c: Add casts.
350 * ldexp.c
351 * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
352 * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
353 * ldlang.h (enum statement_enum): Move to top level.
354 * ldmain.c: Add casts.
355 * ldwrite.c: Add casts.
356 * lexsup.c: Add casts. (enum control_enum): Move to top level.
357 * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
358
3592009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
360
361 * s390-dis.c (print_insn_s390): Avoid 'long long'.
362
3632009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
364
365 * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
366 (print_insn_s390): Signextend and shift pcrel operands before printing.
367
3682009-09-09 H.J. Lu <hongjiu.lu@intel.com>
369
370 * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
371 VEX_LEN_AE_R_X_M_0 in comments.
372
3732009-09-08 DJ Delorie <dj@redhat.com>
374
375 * mep-opc.c: Regenerate.
376
3772009-09-08 Andreas Schwab <schwab@linux-m68k.org>
378
379 * z8kgen.c (struct op): Replace unused flavor with id.
380 (opt): Remove extra xorb entry.
381 (func): Use id field as fallback.
382 (sub): Return new string, caller changed.
383 (internal): Allocate end marker. Assign unique id before sorting.
384 (gas): Likewise. Fix loop end condition.
385 * z8k-opc.h: Regenerate.
386
3872009-09-08 Alan Modra <amodra@bigpond.net.au>
388
389 * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
390
3912009-09-07 Alan Modra <amodra@bigpond.net.au>
392
393 * z8kgen.c (func): Fix thinko last patch.
394
3952009-09-07 Alan Modra <amodra@bigpond.net.au>
396
397 * z8kgen.c (func): Stabilize qsort of identically named entries.
398 * z8k-opc.h: Regenerate.
399
4002009-09-07 Tristan Gingold <gingold@adacore.com>
401
402 * po/opcodes.pot: Regenerate.
403
4042009-09-07 Alan Modra <amodra@bigpond.net.au>
405
406 * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
407 * configure: Regenerate.
408 * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
409 (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use..
410 (i386-gen, ia64-gen, z8kgen): ..here.
411 * Makefile.in: Regenerate.
412
4132009-09-07 Tristan Gingold <gingold@adacore.com>
414
415 * z8k-opc.h: Regenerate.
416
4172009-09-05 Martin Thuresson <martin@mtme.org>
418
419 * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
420 * m88k-dis.c (m88kdis): Rename variable class to in_class.
421 * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
422 Rename argument class to symbol_class.
423
4242009-09-04 Jie Zhang <jie.zhang@analog.com>
425
426 * bfin-dis.c (decode_pseudodbg_assert_0): Change according
427 to the new encoding of DBGA, DBGAH, and DBGAL.
428 (_print_insn_bfin): Likewise.
429
4302009-09-03 Jie Zhang <jie.zhang@analog.com>
431
432 * bfin-dis.c (_print_insn_bfin): Don't declare.
433 (print_insn_bfin): Don't declare.
434 (dregs_pair): Remove.
435 (ignore_bits): Remove.
436 (ccstat): Remove.
437
4382009-09-03 Jie Zhang <jie.zhang@analog.com>
439
440 * bfin-dis.c (IS_DREG): Define.
441 (IS_PREG): Define.
442 (IS_AREG): Define.
443 (IS_GENREG): Define.
444 (IS_DAGREG): Define.
445 (IS_SYSREG): Define.
446 (decode_REGMV_0): Check illegal register move instructions.
447
4482009-09-03 Dave Korn <dave.korn.cygwin@gmail.com>
449
450 * Makefile.am (BUILD_LIBINTL): New variable.
451 (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
452 (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
453 (z8kgen$(EXEEXT_FOR_BUILD)): And here.
454 * Makefile.in: Regenerate.
455
4562009-09-01 DJ Delorie <dj@redhat.com>
457
458 * mep-asm.c: Regenerate.
459 * mep-desc.c: Regenerate.
460 * mep-opc.c: Regenerate.
461
4622009-09-01 Tristan Gingold <gingold@adacore.com>
463
464 * makefile.vms: Ported to Itanium VMS. Remove useless targets and
465 dependencies. Remove unused FORMAT variable.
466 * configure.com: New file to create build.com DCL script for
467 Itanium VMS or Alpha VMS.
468
4692009-08-29 Martin Thuresson <martin@mtme.org>
470
471 * cris-dis.c (bytes_to_skip): Update code to use new name.
472 * i386-dis.c (putop): Update code to use new name.
473 * i386-gen.c (process_i386_opcodes): Update code to use
474 new name.
475 * i386-opc.h (struct template): Rename struct template to
476 insn_template. Update code accordingly.
477 * i386-tbl.h (i386_optab): Update type to use new name.
478 * ia64-dis.c (print_insn_ia64): Rename variable template
479 to template_val.
480 * tic30-dis.c (struct instruction, get_tic30_instruction):
481 Update code to use new name.
482 * tic54x-dis.c (has_lkaddr, get_insn_size)
483 (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
484 Update code to use new name.
485 * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
486 Update type to new name.
487 * z8kgen.c (internal, gas): Rename variable new to new_op.
488
4892009-08-28 H.J. Lu <hongjiu.lu@intel.com>
490
491 * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
492 Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
493 (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
494 CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
495 * Makefile.in: Regenerated.
496
4972009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
498
499 * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
500 [INSTALL_LIBBFD]: ... here, ...
501 [INSTALL_LIBBFD]: ... and empty overrides here.
502 [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
503 [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
504 * Makefile.in: Regenerate.
505 * configure: Regenerate.
506
5072009-08-26 Philippe De Muyter <phdm@macqel.be>
508
509 * m68k-dis.c (print_insn_arg): Add movecr register names for
510 coldfire v4e families.
511
5122009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
513
514 * Makefile.am (SUBDIRS): Build '.' before 'po'.
515 (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
516 (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
517 (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
518 using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
519 (i386-gen.o): New rule.
520 ($(srcdir)/i386-init.h): Adjust.
521 (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
522 (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
523 (ia64-gen.o): New rule.
524 (ia64_asmtab_deps): New variable.
525 ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
526 (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
527 (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
528 likewise.
529 (s390-opc.tab): Adjust.
530 (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
531 rules.
532 (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
533 * Makefile.in: Regenerate.
534 * z8kgen.c (gas): Avoid '/*' in comment.
535 * z8k-opc.h (func): Regenerate.
536
5372009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
538
539 * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
540 from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
541 i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
542 ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
543 msp430-dis.c added.
544 (LIBOPCODES_CFILES): New variable, adding to
545 TARGET_LIBOPCODES_CFILES also non-target library sources.
546 (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
547 files.
548 (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
549 (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
550 * Makefile.in: Regenerate.
551 * po/POTFILES.in: Regenerate.
552
5532009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
554
555 * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
556 [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
557 [INSTALL_LIBBFD] (bfdinclude_DATA): New.
558 [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
559 [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
560 is built shared even if it is not to be installed.
561 (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
562 (install_libopcodes, uninstall_libopcodes): Remove.
563 (AM_CPPFLAGS): Renamed from ...
564 (INCLUDES): ... this.
565 * Makefile.in: Regenerate.
566
567 * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
568 1.11, foreign, no-dist.
569 (MKDEP, m32c_opc_h): Remove variables.
570 (disassemble.lo): Rewrite using automake-style dependency
571 tracking rules; only list the dependency upon the primary source
572 file, but no included headers.
573 (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
574 (i386-gen.o, ia64-gen.o): Remove dependency statements.
575 (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
576 ensure all dependency fragments are included in the Makefile.
577 (s390-opc.lo): Depend on s390-opc.tab.
578 (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
579 (mkdep section): Remove.
580 * Makefile.in: Regenerate.
581 * po/POTFILES.in: Regenerate.
582
583 * Makefile.am (install-pdf, install-html): Remove.
584 * Makefile.in: Regenerate.
585
586 * Makefile.in: Regenerate.
587 * aclocal.m4: Likewise.
588 * config.in: Likewise.
589 * configure: Likewise.
590
5912009-08-06 Michael Eager <eager@eagercon.com>
592
593 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
594 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
595 * Makefile.in: Regenerate.
596 * configure.in: Add bfd_microblaze_arch target.
597 * configure: Regenerate.
598 * disassemble.c: Define ARCH_microblaze, return
599 print_insn_microblaze().
600 * microblaze-dis.c: New MicroBlaze disassembler.
601 * microblaze-opc.h: New MicroBlaze opcode definitions.
602 * microblaze-opcm.h: New MicroBlaze opcode types.
603
6042009-07-25 H.J. Lu <hongjiu.lu@intel.com>
605
606 * configure.in: Handle bfd_l1om_arch.
607 * disassemble.c (disassembler): Likewise.
608
609 * configure: Regenerated.
610
611 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
612 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
613
614 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
615 Add CPU_L1OM_FLAGS.
616 (cpu_flags): Add CpuL1OM.
617 (set_bitfield): Take an argument to set the value field.
618 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
619 (process_i386_opcode_modifier): Updated.
620 (process_i386_operand_type): Likewise.
621 * i386-init.h: Regenerated.
622 * i386-tbl.h: Likewise.
623
624 * i386-opc.h (CpuL1OM): New.
625 (CpuXsave): Updated.
626 (i386_cpu_flags): Add cpul1om.
627
6282009-07-24 Jan Beulich <jbeulich@novell.com>
629
630 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
631 frstpm.
632 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
633 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
634 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
635 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
636 Define.
637 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
638 and cpufisttp.
639 * i386-opc.tbl: Qualify floating point instructions by their
640 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
641 and fsincos to be avilable only on 387. Fix fstsw ax to be
642 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
643 and frstpm.
644 * i386-init.h, i386-tbl.h: Regenerate.
645
6462009-07-20 Nick Clifton <nickc@redhat.com>
647
648 PR 10288
649 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
650 offset or indexed based addressing mode 3.
651
6522009-07-14 Nick Clifton <nickc@redhat.com>
653
654 PR 10288
655 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
656 patterns.
657 (arm_decode_shift): Catch illegal register based shifts.
658 (print_insn_arm): Properly handle negative register r0
659 post-indexed addressing.
660
6612009-07-10 Doug Kwan <dougkwan@google.com>
662
663 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
664 lower 32 bits of long types to make hexadecimal output consistent
665 on both 32-bit and 64-bit hosts.
666
6672009-07-10 Alan Modra <amodra@bigpond.net.au>
668
669 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
670 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
671 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
672 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
673 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
674 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
675 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
676 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
677 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
678 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
679 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
680 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
681
6822009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
683
684 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
685
6862009-07-07 Nick Clifton <nickc@redhat.com>
687
688 PR 10288
689 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
690 addressing modes.
691
6922009-07-06 DJ Delorie <dj@redhat.com>
693
694 * mep-desc.c: Regenerate.
695 * mep-desc.h: Regenerate.
696 * mep-opc.c: Regenerate.
697 * mep-opc.h: Regenerate.
698
6992009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
700
701 * i386-opc.h (CpuFMA4): Add CpuFMA4.
702 (i386_cpu_flags): New.
703 * i386-gen.c: Add CPU_FMA4_FLAGS.
704 * i386-opc.tbl: Add FMA4 instructions.
705 * i386-tbl.h: Regenerate.
706 * i386-init.h: Regenerate.
707 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
708 (OP_XMM_VexW): Ditto.
709 (OP_EX_VexW): Ditto.
710 (VEXI4_Fixup): Ditto.
711 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
712 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
713 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
714 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
715 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
716 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
717 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
718 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
719 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
720 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
721 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
722 (get_vex_imm8): New. handle FMA4.
723 (OP_EX_VexReg): Ditto.
724
7252009-06-30 Nick Clifton <nickc@redhat.com>
726
727 PR 10288
728 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
729 LFM and SFM instructions as comments,.
730 Improve consistency of formatting for instructions displayed as
731 comments and decimal values displayed with their hexadecimal
732 equivalents.
733 Formatting tidy ups.
734
7352009-06-29 Nick Clifton <nickc@redhat.com>
736
737 PR 10288
738 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
739 boundary between variaant and generic coprocessor instuctions.
740 (coprocessor): Use it.
741 Fix architecture version of MCRR and MRRC instructions.
742 (arm_opcdes): Fix patterns for STRB and STRH instructions.
743 (print_insn_coprocessor): Check architecture and extension masks.
744 Print a hexadecimal version of any decimal constant that is
745 outside of the range of -16 to +32.
746 (print_arm_address): Add a return value of the offset used in the
747 adress, if it is worth printing a hexadecimal version of it.
748 (print_insn_neon): Print a hexadecimal version of any decimal
749 constant that is outside of the range of -16 to +32.
750 (print_insn_arm): Likewise.
751 (print_insn_thumb16): Likewise.
752 (print_insn_thumb32): Likewise.
753
754 PR 10297
755 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
756 of an undefined instruction.
757 (arm_opcodes): Use it.
758 (thumb_opcod): Use it.
759 (thumb32_opc): Use it.
760
7612009-06-23 DJ Delorie <dj@redhat.com>
762
763 * mep-desc.c: Regenerate.
764 * mep-desc.h: Regenerate.
765 * mep-dis.c: Regenerate.
766 * mep-ibld.c: Regenerate.
767 * mep-opc.c: Regenerate.
768
769 * mep-asm.c: Regenerate.
770 * mep-opc.c: Regenerate.
771 * mep-opc.h: Regenerate.
772
7732009-06-22 Nick Clifton <nickc@redhat.com>
774
775 * po/fi.po: Updated Finish translation.
776
7772009-06-22 Alan Modra <amodra@bigpond.net.au>
778
779 * m32c-asm.c: Regenerate.
780
7812009-06-22 Alan Modra <amodra@bigpond.net.au>
782
783 * score-dis.c (print_insn_score48, print_insn_score32): Move default
784 case label to proper lexical block.
785 * score7-dis.c (print_insn_score32): Likewise.
786
7872009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
788
789 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
790 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
791 * s390-opc.txt (nopr, nop): Use new instruction format.
792
7932009-06-18 Nick Clifton <nickc@redhat.com>
794
795 PR 10288
796 * arm-dis.c (print_insn_coprocessor): Check that a user specified
797 ARM architecture supports the matched instruction.
798 (print_insn_arm): Likewise.
799 (select_arm_features): New function. Fills in the fields of an
800 arm_feature_set structure based on a given arm machine number.
801 (print_insn): Initialise an arm_feature_set structure.
802
8032009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
804
805 * vax-dis.c (is_function_entry): Return success for synthetic
806 symbols too.
807 (is_plt_tail): New function.
808 (print_insn_vax): Decode PLT entry offset longword.
809
8102009-06-15 Nick Clifton <nickc@redhat.com>
811
812 PR 10186
813 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
814 instruction.
815
816 PR 10173
817 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
818
8192009-06-15 Nick Clifton <nickc@redhat.com>
820
821 PR 10263
822 * arm-dis.c (print_insn): Ignore is_data if the user has requested
823 the disassembly of data as well as instructions.
824
8252009-06-11 Doug Evans <dje@sebabeach.org>
826
827 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
828
8292009-06-11 Anthony Green <green@moxielogic.com>
830
831 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
832 (moxie_form3_opc_info): Add branch instructions.
833 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
834 encoded instructions.
835
8362009-06-06 Anthony Green <green@moxielogic.com>
837
838 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
839 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
840
8412009-06-04 Alan Modra <amodra@bigpond.net.au>
842
843 * dep-in.sed: Don't use \n in replacement part of s command.
844 * Makefile.am (DEP1): LC_ALL for uniq.
845 * Makefile.in: Regenerate.
846
8472009-06-02 Nick Clifton <nickc@redhat.com>
848
849 * po/nl.po: Updated Dutch translation.
850
8512009-06-02 Tristan Gingold <gingold@adacore.com>
852
853 * ia64-gen.c (parse_resource_users, print_dependency_table,
854 add_dis_table_ent, finish_distable, insert_bit_table_ent,
855 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
856 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
857 insert_completer_entry, print_completer_entry, print_completer_table,
858 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
859
8602009-05-28 DJ Delorie <dj@redhat.com>
861
862 * mep-asm.c: Regenerate.
863 * mep-desc.c: Regenerate.
864
8652009-05-26 DJ Delorie <dj@redhat.com>
866
867 * mep-asm.c: Regenerate.
868 * mep-desc.c: Regenerate.
869 * mep-desc.h: Regenerate.
870 * mep-dis.c: Regenerate.
871 * mep-ibld.c: Regenerate.
872 * mep-opc.c: Regenerate.
873 * mep-opc.h: Regenerate.
874
8752009-05-26 Nick Clifton <nickc@redhat.com>
876
877 * po/id.po: Updated Indonesian translation.
878 * po/opcodes.pot: Updated template file.
879
8802009-05-26 Alan Modra <amodra@bigpond.net.au>
881
882 * dep-in.sed: Don't modify .o to .lo here. Output one filename
883 per line with all lines having continuation backslash. Prefix
884 first line with "A", following lines with "B".
885 * Makefile.am (DEP): Don't use dep.sed here.
886 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
887 dep.sed here on dependencies, sort and uniq.
888 * Makefile.in: Regenerate.
889
8902009-05-25 Tristan Gingold <gingold@adacore.com>
891
892 * makefile.vms (OPT): New variable.
893 (CFLAGS): Update compilation flags.
894
8952009-05-22 DJ Delorie <dj@redhat.com>
896
897 * mep-asm.c: Regenerate.
898 * mep-desc.c: Regenerate.
899 * mep-desc.h: Regenerate.
900 * mep-dis.c: Regenerate.
901 * mep-ibld.c: Regenerate.
902 * mep-opc.c: Regenerate.
903 * mep-opc.h: Regenerate.
904
9052009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
906
907 * i386-opc.h (Cpusse5): Delete.
908 (i386_cpu_flags): Delete.
909 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
910 * i386-opc.tbl: Remove SSE5 instructions.
911 * i386-tbl.h: Regenerate.
912 * i386-init.h: Regenerate.
913 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
914 (print_drex_arg): Delete.
915 (OP_DREX4): Delete.
916 (OP_DREX3): Delete.
917 (OP_DREX_ICMP): Delete.
918 (OP_DREX_FCMP): Delete.
919 (DREX_*): Delete.
920 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
921
9222009-05-22 Alan Modra <amodra@bigpond.net.au>
923
924 * Makefile.am: Run "make dep-am".
925 * Makefile.in: Regenerate.
926 * po/POTFILES.in: Regenerate.
927
9282009-05-19 DJ Delorie <dj@redhat.com>
929
930 * mep-asm.c: Regenerate.
931 * mep-opc.c: Regenerate.
932
9332009-04-30 DJ Delorie <dj@redhat.com>
934
935 * mep-asm.c: Regenerate.
936 * mep-desc.c: Regenerate.
937 * mep-desc.h: Regenerate.
938 * mep-dis.c: Regenerate.
939 * mep-ibld.c: Regenerate.
940 * mep-opc.c: Regenerate.
941 * mep-opc.h: Regenerate.
942
9432009-04-17 DJ Delorie <dj@redhat.com
944
945 * mep-desc.c: Regenerate.
946 * mep-ibld.c: Regenerate.
947 * mep-opc.c: Regenerate.
948 * mep-opc.h: Regenerate.
949
9502009-04-15 Anthony Green <green@moxielogic.com>
951
952 * moxie-opc.c, moxie-dis.c: Created.
953 * Makefile.am: Build the moxie source files.
954 * configure.in: Add moxie support.
955 * Makefile.in, configure: Rebuilt.
956 * disassemble.c (disassembler): Add moxie support.
957 (ARCH_moxie): Define.
958
9592009-04-15 Jan Beulich <jbeulich@novell.com>
960
961 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
962 extension to None.
963 (pshab, pshaw, pshad, pshaq): Likewise.
964 * i386-tbl.h: Re-generate.
965
9662009-04-08 DJ Delorie <dj@redhat.com
967
968 * mep-asm.c: Regenerate.
969 * mep-desc.c: Regenerate.
970 * mep-desc.h: Regenerate.
971 * mep-dis.c: Regenerate.
972 * mep-ibld.c: Regenerate.
973 * mep-opc.c: Regenerate.
974 * mep-opc.h: Regenerate.
975
9762009-04-07 Peter Bergner <bergner@vnet.ibm.com>
977
978 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
979 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
980 Reorder entries so the extended mnemonics are listed before tlbilx.
981
9822009-04-02 Peter Bergner <bergner@vnet.ibm.com>
983
984 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
985 due to -many/-Many.
986 (print_insn_powerpc): Make sure we only deprecate instructions using
987 the original dialect and not a modified dialect due to -Many handling.
988 Move the handling of the condition register and default operands to
989 the end of the if/else if/else chain.
990 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
991 instructions from newer processors are listed before older ones.
992 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
993 that have instructions with conflicting opcodes.
994
9952009-04-01 Peter Bergner <bergner@vnet.ibm.com>
996
997 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
998 E500MC entries.
999
10002009-04-01 Christophe Lyon <christophe.lyon@st.com>
1001
1002 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1003
10042009-03-30 Joseph Myers <joseph@codesourcery.com>
1005
1006 * arm-dis.c (print_insn): Also check section matches in backwards
1007 search for mapping symbol.
1008
10092009-03-26 H.J. Lu <hongjiu.lu@intel.com>
1010
1011 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1012
10132009-03-18 Alan Modra <amodra@bigpond.net.au>
1014
1015 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1016 * Makefile.am: Run "make dep-am".
1017 * Makefile.in: Regenerate.
1018 * openrisc-opc.c: Regenerate.
1019
10202009-03-10 Nick Clifton <nickc@redhat.com>
1021
1022 * po/id.po: Updated Indonesian translation.
1023
10242009-03-10 Alan Modra <amodra@bigpond.net.au>
1025
1026 * ppc-dis.c: Include "opintl.h".
1027 (struct ppc_mopt, ppc_opts): New.
1028 (ppc_parse_cpu): New function.
1029 (powerpc_init_dialect): Use it.
1030 (print_ppc_disassembler_options): Dump options from ppc_opts.
1031 Internationalize message.
1032
10332009-03-06 Nick Clifton <nickc@redhat.com>
1034
1035 * po/es.po: Updated Spanish translation.
1036
10372009-03-04 Alan Modra <amodra@bigpond.net.au>
1038
1039 PR 6768
1040 * configure.in: Test for ld --as-needed support. Link shared
1041 libopcodes against libm.
1042 * configure: Regenerate.
1043
10442009-03-03 Peter Bergner <bergner@vnet.ibm.com>
1045
1046 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1047 instructions from newer processors are listed before older ones.
1048
10492009-03-03 Alan Modra <amodra@bigpond.net.au>
1050
1051 * Makefile.am: Run "make dep-am".
1052 (HFILES): Move lm32-desc.h and lm32-opc.h from..
1053 (CFILES): ..here.
1054 * Makefile.in: Regenerate.
1055
10562009-03-02 Qinwei <qinwei@sunnorth.com.cn>
1057
1058 * score7-dis.c: New file.
1059 * Makefile.am: Add dependencies for score7-dis.c.
1060 * Makefile.in: Regenerate.
1061 * configure.in: Add score7-dis to score files.
1062 * configure: Regenerate.
1063 * score-dis.c: Add support for score7 architecture.
1064 * score-opc.h: Likewise.
1065
10662009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1067
1068 * configure: Regenerate.
1069
10702009-02-27 H.J. Lu <hongjiu.lu@intel.com>
1071
1072 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1073
10742009-02-26 Peter Bergner <bergner@vnet.ibm.com>
1075
1076 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1077 the power7 and the isel instructions.
1078 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1079 (insert_dm, extract_dm): Likewise.
1080 (XB6): Update comment to include XX2 form.
1081 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1082 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1083 (RemoveXX3DM): Delete.
1084 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1085 "mftgpr">: Deprecate for POWER7.
1086 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1087 "frsqrte.">: Deprecate the three operand form and enable the two
1088 operand form for POWER7 and later.
1089 <"wait">: Extend to accept optional parameter. Enable for POWER7.
1090 <"waitsrv", "waitimpl">: Add extended opcodes.
1091 <"ldbrx", "stdbrx">: Enable for POWER7.
1092 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1093 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1094 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1095 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1096 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1097 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1098 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1099 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1100 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1101 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1102 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1103 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1104 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1105 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1106 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1107 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1108 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1109 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1110 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1111 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1112 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1113 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1114 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1115 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1116 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1117 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1118 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1119 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1120 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1121 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1122 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1123 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1124 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1125 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1126 "xxspltw", "xxswapd">: Add VSX opcodes.
1127
11282009-02-23 H.J. Lu <hongjiu.lu@intel.com>
1129
1130 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1131 (operand_types): Remove Vex_Imm4.
1132
1133 * i386-opc.h (Vex_Imm4): Removed.
1134 (OTMax): Updated.
1135 (i386_operand_type): Remove vex_imm4.
1136
1137 * i386-opc.tbl: Remove Vex_Imm4 comments.
1138 * i386-init.h: Regenerated.
1139 * i386-tbl.h: Likewise.
1140
11412009-02-23 Richard Earnshaw <rearnsha@arm.com>
1142
1143 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1144 vq{r}shr{u}n.s64 insnstructions.
1145
11462009-02-19 Peter Bergner <bergner@vnet.ibm.com>
1147
1148 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1149 operand to be a float point register (FRT/FRS).
1150
11512009-02-18 Adam Nemet <anemet@caviumnetworks.com>
1152
1153 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1154 dmfc2 and dmtc2 before the architecture-level variants.
1155
11562009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
1157
1158 * fr30-opc.c: Regenerate.
1159 * frv-opc.c: Regenerate.
1160 * ip2k-opc.c: Regenerate.
1161 * iq2000-opc.c: Regenerate.
1162 * lm32-opc.c: Regenerate.
1163 * m32c-opc.c: Regenerate.
1164 * m32r-opc.c: Regenerate.
1165 * mep-opc.c: Regenerate.
1166 * mt-opc.c: Regenerate.
1167 * xc16x-opc.c: Regenerate.
1168 * xstormy16-opc.c: Regenerate.
1169 * tic54x-dis.c (print_instruction): Avoid compiler warning on
1170 sprintf call.
1171
11722009-02-12 Nathan Sidwell <nathan@codesourcery.com>
1173
1174 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1175
11762009-02-05 Peter Bergner <bergner@vnet.ibm.com>
1177
1178 * ppc-opc.c: Update copyright year.
1179 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1180 ordering for POWER4 and later and use the correct Server ordering.
1181
11822009-02-04 H.J. Lu <hongjiu.lu@intel.com>
1183
1184 AVX Programming Reference (January, 2009)
1185 * i386-dis.c (PREFIX_VEX_3A44): New.
1186 (VEX_LEN_3A44_P_2): Likewise.
1187 (PREFIX_VEX_3A48): Updated.
1188 (VEX_LEN_3A4C_P_2): Likewise.
1189 (prefix_table): Add PREFIX_VEX_3A44.
1190 (vex_table): Likewise.
1191 (vex_len_table): Add VEX_LEN_3A44_P_2.
1192
1193 * i386-opc.tbl: Add PCLMUL + AVX instructions.
1194 * i386-tbl.h: Regenerated.
1195
11962009-02-03 Sandip Matte <sandip@rmicorp.com>
1197
1198 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1199 (mips_arch_choices): Add XLR entry.
1200 * mips-opc.c (XLR): Define.
1201 (mips_builtin_opcodes): Add XLR instructions.
1202
12032009-02-03 Carlos O'Donell <carlos@codesourcery.com>
1204
1205 * Makefile.am: Add install-pdf target.
1206 * po/Make-in: Add install-pdf target.
1207 * Makefile.in: Regenerate.
1208
12092009-02-02 DJ Delorie <dj@redhat.com>
1210
1211 * mep-asm.c: Regenerate.
1212 * mep-desc.c: Regenerate.
1213 * mep-desc.h: Regenerate.
1214 * mep-dis.c: Regenerate.
1215 * mep-ibld.c: Regenerate.
1216 * mep-opc.c: Regenerate.
1217 * mep-opc.h: Regenerate.
1218
12192009-01-29 Mark Mitchell <mark@codesourcery.com>
1220
1221 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1222 qsub, and qdsub.
1223
12242009-01-28 Chao-ying Fu <fu@mips.com>
1225
1226 * mips-opc.c (suxc1): Add the flag of FP_D.
1227
12282009-01-20 Alan Modra <amodra@bigpond.net.au>
1229
1230 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1231 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1232 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1233 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1234 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1235 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1236 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1237 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1238
12392009-01-16 Alan Modra <amodra@bigpond.net.au>
1240
1241 * configure.in (commonbfdlib): Delete.
1242 (SHARED_LIBADD): Add pic libiberty if such is available.
1243 * configure: Regenerate.
1244 * po/POTFILES.in: Regenerate.
1245
12462009-01-14 Peter Bergner <bergner@vnet.ibm.com>
1247
1248 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1249 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1250 operand form and enable the four operand form for POWER6 and later.
1251 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1252 three operand form for POWER6 and later.
1253
12542009-01-14 Mike Frysinger <vapier@gentoo.org>
1255
1256 * bfin-dis.c (OUTS): Use "%s" as format string.
1257
12582009-01-13 H.J. Lu <hongjiu.lu@intel.com>
1259
1260 * i386-gen.c (cpu_flag_init): Remove a white space.
1261 (operand_type_init): Likewise.
1262
12632009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1264
1265 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1266 * i386-tbl.h: Regenerated.
1267
12682009-01-12 H.J. Lu <hongjiu.lu@intel.com>
1269
1270 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1271 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
1272 subS, xorS and cmpS.
1273
12742009-01-10 H.J. Lu <hongjiu.lu@intel.com>
1275
1276 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1277 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
1278 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1279 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
1280 and CpuSYSCALL.
1281 (lineno): Removed.
1282 (set_bitfield): Take an argument, lineno. Don't report lineno
1283 on error if it is -1.
1284 (process_i386_cpu_flag): Take an argument, lineno.
1285 (process_i386_opcode_modifier): Likewise.
1286 (process_i386_operand_type): Likewise.
1287 (output_i386_opcode): Likewise.
1288 (opcode_hash_entry): Add lineno.
1289 (process_i386_opcodes): Updated.
1290 (process_i386_registers): Likewise.
1291 (process_i386_initializers): Likewise.
1292
1293 * i386-opc.h (CpuP4): Removed.
1294 (CpuK6): Likewise.
1295 (CpuK8): Likewise.
1296 (CpuClflush): New.
1297 (CpuSYSCALL): Likewise.
1298 (CpuMMX): Updated.
1299 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
1300 cpuclflush and cpusyscall.
1301
1302 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1303 syscall and sysret.
1304 * i386-init.h: Regenerated.
1305 * i386-tbl.h: Likewise.
1306
13072009-01-09 H.J. Lu <hongjiu.lu@intel.com>
1308
1309 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1310 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
1311 (cpu_flags): Add CpuRdtscp.
1312 (set_bitfield): Remove CpuSledgehammer check.
1313
1314 * i386-opc.h (CpuRdtscp): New.
1315 (CpuLM): Updated.
1316 (i386_cpu_flags): Add cpurdtscp.
1317
1318 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1319 * i386-init.h: Regenerated.
1320 * i386-tbl.h: Likewise.
1321
13222009-01-09 Peter Bergner <bergner@vnet.ibm.com>
1323
1324 * ppc-opc.c (PPCNONE): Define.
1325 (NOPOWER4): Delete.
1326 (powerpc_opcodes): Initialize the new "deprecated" field.
1327
13282009-01-06 H.J. Lu <hongjiu.lu@intel.com>
1329
1330 AVX Programming Reference (December, 2008)
1331 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1332 (VEX_LEN_E7_P_2_M_0): Likewise.
1333 (VEX_LEN_2C_P_1): Updated.
1334 (VEX_LEN_E8_P_2): Likewise.
1335 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1336 (mod_table): Likewise.
1337
1338 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1339 * i386-tbl.h: Regenerated.
1340
13412009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1342
1343 * i386-gen.c (process_copyright): Update for 2009.
1344
1345 * i386-init.h: Regenerated.
1346 * i386-tbl.h: Likewise.
1347
13482009-01-05 H.J. Lu <hongjiu.lu@intel.com>
1349
1350 AVX Programming Reference (December, 2008)
1351 * i386-dis.c (OP_VEX_FMA): Removed.
1352 (OP_EX_VexW): Likewise.
1353 (OP_EX_VexImmW): Likewise.
1354 (OP_XMM_VexW): Likewise.
1355 (VEXI4_Fixup): Likewise.
1356 (VPERMIL2_Fixup): Likewise.
1357 (VexI4): Likewise.
1358 (VexFMA): Likewise.
1359 (Vex128FMA): Likewise.
1360 (EXVexW): Likewise.
1361 (EXdVexW): Likewise.
1362 (EXqVexW): Likewise.
1363 (EXVexImmW): Likewise.
1364 (XMVexW): Likewise.
1365 (VPERMIL2): Likewise.
1366 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1367 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1368 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1369 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1370 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1371 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1372 (get_vex_imm8): Likewise.
1373 (OP_EX_VexReg): Likewise.
1374 vpermil2_op): Likewise.
1375 (EXVexWdq): New.
1376 (vex_w_dq_mode): Likewise.
1377 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1378 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1379 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1380 (es_reg): Updated.
1381 (PREFIX_VEX_38DB): Likewise.
1382 (PREFIX_VEX_3A4A): Likewise.
1383 (PREFIX_VEX_3A60): Likewise.
1384 (PREFIX_VEX_3ADF): Likewise.
1385 (VEX_LEN_3ADF_P_2): Likewise.
1386 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1387 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1388 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1389 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
1390 PREFIX_VEX_3896...PREFIX_VEX_389F,
1391 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1392 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1393 (vex_table): Likewise.
1394 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1395 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1396 (putop): Support "%XW".
1397 (intel_operand_size): Handle vex_w_dq_mode.
1398
1399 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1400
1401 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1402 instructions. Add new FMA instructions.
1403 * i386-tbl.h: Regenerated.
1404
14052009-01-02 Matthias Klose <doko@ubuntu.com>
1406
1407 * or32-opc.c (or32_print_register, or32_print_immediate,
1408 disassemble_insn): Don't rely on undefined sprintf behaviour.
1409
1410For older changes see ChangeLog-2008
1411\f
1412Local Variables:
1413mode: change-log
1414left-margin: 8
1415fill-column: 74
1416version-control: never
1417End:
GDB Binutils - Deliverables
This page took 0.027882 seconds and 4 git commands to generate.