| 1 | 2009-11-06 Sebastian Pop <sebastian.pop@amd.com> |
| 2 | |
| 3 | * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to |
| 4 | reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to |
| 5 | B.mm in the RXB.mmmmm byte, and so when B is set, we still should use |
| 6 | the xop_table. |
| 7 | (get_valid_dis386): Removed unused condition (from cut/n/paste) for |
| 8 | XOP instructions. |
| 9 | |
| 10 | 2009-11-05 Sebastian Pop <sebastian.pop@amd.com> |
| 11 | Quentin Neill <quentin.neill@amd.com> |
| 12 | |
| 13 | * opcodes/i386-dis.c (OP_LWPCB_E): New. |
| 14 | (OP_LWP_E): New. |
| 15 | (OP_LWP_I): New. |
| 16 | (USE_XOP_8F_TABLE): New. |
| 17 | (XOP_8F_TABLE): New. |
| 18 | (REG_XOP_LWPCB): New. |
| 19 | (REG_XOP_LWP): New. |
| 20 | (XOP_09): New. |
| 21 | (XOP_0A): New. |
| 22 | (reg_table): Redirect REG_8F to XOP_8F_TABLE. |
| 23 | Add entries for REG_XOP_LWPCB and REG_XOP_LWP. |
| 24 | (xop_table): New. |
| 25 | (get_valid_dis386): Handle USE_XOP_8F_TABLE. |
| 26 | Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values |
| 27 | to access to the vex_table. |
| 28 | (OP_LWPCB_E): New. |
| 29 | (OP_LWP_E): New. |
| 30 | (OP_LWP_I): New. |
| 31 | * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP. |
| 32 | (cpu_flags): Add CpuLWP. |
| 33 | (opcode_modifiers): Add VexLWP, XOP09, and XOP0A. |
| 34 | * opcodes/i386-opc.h (CpuLWP): New. |
| 35 | (i386_cpu_flags): Add bit cpulwp. |
| 36 | (VexLWP): New. |
| 37 | (XOP09): New. |
| 38 | (XOP0A): New. |
| 39 | (i386_opcode_modifier): Add vexlwp, xop09, and xop0a. |
| 40 | * opcodes/i386-opc.tbl (llwpcb): Added. |
| 41 | (lwpval): Added. |
| 42 | (lwpins): Added. |
| 43 | |
| 44 | 2009-11-04 DJ Delorie <dj@redhat.com> |
| 45 | |
| 46 | * rx-decode.opc (rx_decode_opcode) (mvtipl): Add. |
| 47 | (mvtcp, mvfcp, opecp): Remove. |
| 48 | * rx-decode.c: Regenerate. |
| 49 | * rx-dis.c (cpen): Remove. |
| 50 | |
| 51 | 2009-11-03 Doug Evans <dje@sebabeach.org> |
| 52 | |
| 53 | * m32c-desc.c: Regenerate. |
| 54 | * mep-desc.c: Regenerate. |
| 55 | |
| 56 | 2009-11-02 Paul Brook <paul@codesourcery.com> |
| 57 | |
| 58 | * arm-dis.c (coprocessor_opcodes): Update to use new feature flags. |
| 59 | Add VFPv4 instructions. |
| 60 | |
| 61 | 2009-10-29 Sebastian Pop <sebastian.pop@amd.com> |
| 62 | |
| 63 | * i386-dis.c (OP_VEX_FMA): Removed. |
| 64 | (VexFMA): Removed. |
| 65 | (Vex128FMA): Removed. |
| 66 | (prefix_table): First source operand of FMA4 insns is decoded |
| 67 | with Vex not with VexFMA. |
| 68 | (OP_EX_VexW): Second source operand is decoded with get_vex_imm8 |
| 69 | when vex.w is set. Third source operand is decoded with |
| 70 | |
| 71 | 2009-10-27 Alan Modra <amodra@bigpond.net.au> |
| 72 | |
| 73 | * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h. |
| 74 | * Makefile.in: Regenerate. |
| 75 | * po/POTFILES.in: Regenerate. |
| 76 | |
| 77 | 2009-10-23 Doug Evans <dje@sebabeach.org> |
| 78 | |
| 79 | * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h. |
| 80 | * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h. |
| 81 | * cgen-bitset.c: Update. |
| 82 | * fr30-desc.h: Regenerate. |
| 83 | * frv-desc.h: Regenerate. |
| 84 | * ip2k-desc.h: Regenerate. |
| 85 | * iq2000-desc.h: Regenerate. |
| 86 | * lm32-desc.h: Regenerate. |
| 87 | * m32c-desc.h: Regenerate. |
| 88 | * m32c-opc.h: Regenerate. |
| 89 | * m32r-desc.h: Regenerate. |
| 90 | * mep-desc.h: Regenerate. |
| 91 | * mt-desc.h: Regenerate. |
| 92 | * openrisc-desc.h: Regenerate. |
| 93 | * xc16x-desc.h: Regenerate. |
| 94 | * xstormy16-desc.h: Regenerate. |
| 95 | |
| 96 | 2009-10-22 DJ Delorie <dj@redhat.com> |
| 97 | |
| 98 | * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE. |
| 99 | * rx-decode.c: Regenerated. |
| 100 | |
| 101 | 2009-10-20 H.J. Lu <hongjiu.lu@intel.com> |
| 102 | |
| 103 | PR gas/10775 |
| 104 | * i386-dis.c: Document LB, LS and LV macros. |
| 105 | (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction |
| 106 | with the 64-bit displacement or immediate operand. |
| 107 | (putop): Handle LB, LS and LV macros. |
| 108 | |
| 109 | 2009-10-18 Doug Evans <dje@sebabeach.org> |
| 110 | |
| 111 | * lm32-opinst.c: Regenerate. |
| 112 | * m32c-desc.c: Regenerate. |
| 113 | * m32r-opinst.c: Regenerate. |
| 114 | * openrisc-ibld.c: Regenerate. |
| 115 | * xc16x-desc.c: Regenerate. |
| 116 | * xc16x-desc.h: Regenerate. |
| 117 | |
| 118 | 2009-10-17 Doug Evans <dje@sebabeach.org> |
| 119 | |
| 120 | * Makefile.am (CGEN_CPUS): Add iq2000, lm32. |
| 121 | (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are |
| 122 | sorted alphabetically. |
| 123 | (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen |
| 124 | stamp-* rules are sorted alphabetically. |
| 125 | * Makefile.in: Regenerate. |
| 126 | |
| 127 | 2009-10-16 H.J. Lu <hongjiu.lu@intel.com> |
| 128 | |
| 129 | * i386-opc.h: Use enum instead of nested macros. |
| 130 | |
| 131 | 2009-10-16 H.J. Lu <hongjiu.lu@intel.com> |
| 132 | |
| 133 | * i386-dis.c: Simplify enums. |
| 134 | |
| 135 | 2009-10-15 H.J. Lu <hongjiu.lu@intel.com> |
| 136 | Ineiev <ineiev@gmail.com> |
| 137 | |
| 138 | PR binutils/10767 |
| 139 | * i386-dis.c: Use enum instead of nested macros. |
| 140 | |
| 141 | 2009-10-15 H.J. Lu <hongjiu.lu@intel.com> |
| 142 | |
| 143 | * i386-dis.c (MAX_BYTEMODE): Removed. |
| 144 | |
| 145 | 2009-10-14 Tomas Hurka <tom@hukatronic.cz> |
| 146 | |
| 147 | PR 969 |
| 148 | * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl. |
| 149 | |
| 150 | 2009-10-13 H.J. Lu <hongjiu.lu@intel.com> |
| 151 | |
| 152 | * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg |
| 153 | and vex_w_done. |
| 154 | |
| 155 | 2009-10-07 Michael Eager <eager@eagercon.com> |
| 156 | |
| 157 | * microblaze-dis.c: Add include for microblaze-dis.h, |
| 158 | eliminate local extern decls. |
| 159 | * microblaze-dis.h: New. |
| 160 | |
| 161 | 2009-10-06 Nick Clifton <nickc@redhat.com> |
| 162 | |
| 163 | * po/fi.po: Updated Finnish translation. |
| 164 | |
| 165 | 2009-10-03 Andreas Schwab <schwab@linux-m68k.org> |
| 166 | |
| 167 | * opc2c.c: Include "libiberty.h" and <errno.h>. |
| 168 | (orig_filename): Constify. |
| 169 | (dump_lines): Fix line number directive. |
| 170 | (main): Set orig_filename to basename of input file. Use |
| 171 | xstrerror. |
| 172 | |
| 173 | * Makefile.am (rx-dis.lo): Remove explicit dependencies. |
| 174 | ($(srcdir)/rx-decode.c): Use @MAINT@. Use $(EXEEXT_FOR_BUILD) |
| 175 | instead of $(EXEEXT). |
| 176 | (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use |
| 177 | $(LINK_FOR_BUILD). Link with libiberty. |
| 178 | (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD). |
| 179 | (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c. |
| 180 | * Makefile.in: Regenerated. |
| 181 | * rx-decode.c: Regenerated. |
| 182 | |
| 183 | 2009-10-03 Paul Reed <paulreed@paddedcell.com> |
| 184 | |
| 185 | * arm-dis.c (print_insn): Check symtab_size not *symtab. |
| 186 | |
| 187 | 2009-10-02 H.J. Lu <hongjiu.lu@intel.com> |
| 188 | |
| 189 | * i386-opc.tbl: Drop Disp64 on jump and loop instructions. |
| 190 | * i386-tbl.h: Regenerated. |
| 191 | |
| 192 | 2009-10-02 Peter Bergner <bergner@vnet.ibm.com> |
| 193 | |
| 194 | * ppc-dis.c (ppc_opts): Add "476" entry. |
| 195 | * ppc-opc.c (PPC476): Define. |
| 196 | (powerpc_opcodes): Update mnemonics where required for 476. |
| 197 | |
| 198 | 2009-10-01 Peter Bergner <bergner@vnet.ibm.com> |
| 199 | |
| 200 | * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2. |
| 201 | * ppc-dis.c (ppc_opts): Likewise. |
| 202 | Rename "ppca2" to "a2". |
| 203 | |
| 204 | 2009-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com> |
| 205 | |
| 206 | * crx-dis.c (match_opcode): Truncate mcode to 32-bit. |
| 207 | |
| 208 | 2009-09-29 DJ Delorie <dj@redhat.com> |
| 209 | |
| 210 | * Makefile.am: Add RX files. |
| 211 | * configure.in: Add support for RX target. |
| 212 | * disassemble.c: Likewise. |
| 213 | * Makefile.in: Regenerate. |
| 214 | * configure: Regenerate. |
| 215 | * opc2c.c: New file. |
| 216 | * rx-decode.c: New file. |
| 217 | * rx-decode.opc: New file. |
| 218 | * rx-dis.c: New file. |
| 219 | |
| 220 | 2009-09-29 Peter Bergner <bergner@vnet.ibm.com> |
| 221 | |
| 222 | * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux", |
| 223 | "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes. |
| 224 | |
| 225 | 2009-09-25 Michael Eager <eager@eagercon.com> |
| 226 | |
| 227 | * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address, |
| 228 | microblaze_decode_insn): Add declarations. |
| 229 | (get_delay_slots_microblaze): Remove. |
| 230 | |
| 231 | 2009-09-25 Martin Thuresson <martint@google.com> |
| 232 | |
| 233 | Update sources to make arc and arm targets compile cleanly with |
| 234 | -Wc++-compat: |
| 235 | * arc-dis.c Fix casts. |
| 236 | * arc-ext.c: Add casts. |
| 237 | * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous |
| 238 | enum. |
| 239 | |
| 240 | 2009-09-24 H.J. Lu <hongjiu.lu@intel.com> |
| 241 | |
| 242 | * i386-gen.c (opcode_modifiers): Remove Vex256. |
| 243 | (set_bitfield): Handle XXX=V. |
| 244 | |
| 245 | * i386-opc.h (Vex): Update comments. |
| 246 | (Vex256): Removed. |
| 247 | (VexNDS): Updated. |
| 248 | (i386_opcode_modifier): Change vex to 2 bits. Remove vex256. |
| 249 | |
| 250 | * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2. |
| 251 | * i386-tbl.h: Regenerated. |
| 252 | |
| 253 | 2009-09-23 Nick Clifton <nickc@redhat.com> |
| 254 | |
| 255 | * po/fr.po: Updated French translation. |
| 256 | |
| 257 | 2009-09-21 Ben Elliston <bje@au.ibm.com> |
| 258 | Peter Bergner <bergner@vnet.ibm.com> |
| 259 | |
| 260 | * ppc-dis.c (ppc_opts): Add "ppca2" entry. |
| 261 | * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx., |
| 262 | eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx, |
| 263 | icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx., |
| 264 | ici mnemonics. |
| 265 | (ERAT_T): New operand. |
| 266 | (XWC_MASK): New mask. |
| 267 | (XOPL2): New macro. |
| 268 | (PPCA2): Define. |
| 269 | |
| 270 | 2009-09-18 Nick Clifton <nickc@redhat.com> |
| 271 | |
| 272 | * po/es.po: Updated Spanish translation. |
| 273 | * po/vi.po: Updated Vietnamese translation. |
| 274 | |
| 275 | 2009-09-15 H.J. Lu <hongjiu.lu@intel.com> |
| 276 | |
| 277 | * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if |
| 278 | disp == -disp. |
| 279 | |
| 280 | 2009-09-14 Nick Clifton <nickc@redhat.com> |
| 281 | |
| 282 | * po/nl.po: Updated Dutch translation. |
| 283 | |
| 284 | 2009-09-11 Nick Clifton <nickc@redhat.com> |
| 285 | |
| 286 | * po/opcodes.pot: Updated by the Translation project. |
| 287 | |
| 288 | 2009-09-11 Martin Thuresson <martint@google.com> |
| 289 | |
| 290 | Updated sources to compile cleanly with -Wc++-compat: |
| 291 | * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level. |
| 292 | * ldcref.c: Add casts. |
| 293 | * ldctor.c: Add casts. |
| 294 | * ldexp.c |
| 295 | * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level. |
| 296 | * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer. |
| 297 | * ldlang.h (enum statement_enum): Move to top level. |
| 298 | * ldmain.c: Add casts. |
| 299 | * ldwrite.c: Add casts. |
| 300 | * lexsup.c: Add casts. (enum control_enum): Move to top level. |
| 301 | * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer. |
| 302 | |
| 303 | 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> |
| 304 | |
| 305 | * s390-dis.c (print_insn_s390): Avoid 'long long'. |
| 306 | |
| 307 | 2009-09-10 Andreas Krebbel <Andreas.Krebbel@de.ibm.com> |
| 308 | |
| 309 | * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands. |
| 310 | (print_insn_s390): Signextend and shift pcrel operands before printing. |
| 311 | |
| 312 | 2009-09-09 H.J. Lu <hongjiu.lu@intel.com> |
| 313 | |
| 314 | * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to |
| 315 | VEX_LEN_AE_R_X_M_0 in comments. |
| 316 | |
| 317 | 2009-09-08 DJ Delorie <dj@redhat.com> |
| 318 | |
| 319 | * mep-opc.c: Regenerate. |
| 320 | |
| 321 | 2009-09-08 Andreas Schwab <schwab@linux-m68k.org> |
| 322 | |
| 323 | * z8kgen.c (struct op): Replace unused flavor with id. |
| 324 | (opt): Remove extra xorb entry. |
| 325 | (func): Use id field as fallback. |
| 326 | (sub): Return new string, caller changed. |
| 327 | (internal): Allocate end marker. Assign unique id before sorting. |
| 328 | (gas): Likewise. Fix loop end condition. |
| 329 | * z8k-opc.h: Regenerate. |
| 330 | |
| 331 | 2009-09-08 Alan Modra <amodra@bigpond.net.au> |
| 332 | |
| 333 | * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64. |
| 334 | |
| 335 | 2009-09-07 Alan Modra <amodra@bigpond.net.au> |
| 336 | |
| 337 | * z8kgen.c (func): Fix thinko last patch. |
| 338 | |
| 339 | 2009-09-07 Alan Modra <amodra@bigpond.net.au> |
| 340 | |
| 341 | * z8kgen.c (func): Stabilize qsort of identically named entries. |
| 342 | * z8k-opc.h: Regenerate. |
| 343 | |
| 344 | 2009-09-07 Tristan Gingold <gingold@adacore.com> |
| 345 | |
| 346 | * po/opcodes.pot: Regenerate. |
| 347 | |
| 348 | 2009-09-07 Alan Modra <amodra@bigpond.net.au> |
| 349 | |
| 350 | * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst. |
| 351 | * configure: Regenerate. |
| 352 | * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete. |
| 353 | (BUILD_LIBS, BUILD_LIB_DEPS): Define. Use.. |
| 354 | (i386-gen, ia64-gen, z8kgen): ..here. |
| 355 | * Makefile.in: Regenerate. |
| 356 | |
| 357 | 2009-09-07 Tristan Gingold <gingold@adacore.com> |
| 358 | |
| 359 | * z8k-opc.h: Regenerate. |
| 360 | |
| 361 | 2009-09-05 Martin Thuresson <martin@mtme.org> |
| 362 | |
| 363 | * ia64-dis.c (print_insn_ia64): Update code to use renamed member. |
| 364 | * m88k-dis.c (m88kdis): Rename variable class to in_class. |
| 365 | * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol): |
| 366 | Rename argument class to symbol_class. |
| 367 | |
| 368 | 2009-09-04 Jie Zhang <jie.zhang@analog.com> |
| 369 | |
| 370 | * bfin-dis.c (decode_pseudodbg_assert_0): Change according |
| 371 | to the new encoding of DBGA, DBGAH, and DBGAL. |
| 372 | (_print_insn_bfin): Likewise. |
| 373 | |
| 374 | 2009-09-03 Jie Zhang <jie.zhang@analog.com> |
| 375 | |
| 376 | * bfin-dis.c (_print_insn_bfin): Don't declare. |
| 377 | (print_insn_bfin): Don't declare. |
| 378 | (dregs_pair): Remove. |
| 379 | (ignore_bits): Remove. |
| 380 | (ccstat): Remove. |
| 381 | |
| 382 | 2009-09-03 Jie Zhang <jie.zhang@analog.com> |
| 383 | |
| 384 | * bfin-dis.c (IS_DREG): Define. |
| 385 | (IS_PREG): Define. |
| 386 | (IS_AREG): Define. |
| 387 | (IS_GENREG): Define. |
| 388 | (IS_DAGREG): Define. |
| 389 | (IS_SYSREG): Define. |
| 390 | (decode_REGMV_0): Check illegal register move instructions. |
| 391 | |
| 392 | 2009-09-03 Dave Korn <dave.korn.cygwin@gmail.com> |
| 393 | |
| 394 | * Makefile.am (BUILD_LIBINTL): New variable. |
| 395 | (i386-gen$(EXEEXT_FOR_BUILD)): Use it. |
| 396 | (ia64-gen$(EXEEXT_FOR_BUILD)): And here. |
| 397 | (z8kgen$(EXEEXT_FOR_BUILD)): And here. |
| 398 | * Makefile.in: Regenerate. |
| 399 | |
| 400 | 2009-09-01 DJ Delorie <dj@redhat.com> |
| 401 | |
| 402 | * mep-asm.c: Regenerate. |
| 403 | * mep-desc.c: Regenerate. |
| 404 | * mep-opc.c: Regenerate. |
| 405 | |
| 406 | 2009-09-01 Tristan Gingold <gingold@adacore.com> |
| 407 | |
| 408 | * makefile.vms: Ported to Itanium VMS. Remove useless targets and |
| 409 | dependencies. Remove unused FORMAT variable. |
| 410 | * configure.com: New file to create build.com DCL script for |
| 411 | Itanium VMS or Alpha VMS. |
| 412 | |
| 413 | 2009-08-29 Martin Thuresson <martin@mtme.org> |
| 414 | |
| 415 | * cris-dis.c (bytes_to_skip): Update code to use new name. |
| 416 | * i386-dis.c (putop): Update code to use new name. |
| 417 | * i386-gen.c (process_i386_opcodes): Update code to use |
| 418 | new name. |
| 419 | * i386-opc.h (struct template): Rename struct template to |
| 420 | insn_template. Update code accordingly. |
| 421 | * i386-tbl.h (i386_optab): Update type to use new name. |
| 422 | * ia64-dis.c (print_insn_ia64): Rename variable template |
| 423 | to template_val. |
| 424 | * tic30-dis.c (struct instruction, get_tic30_instruction): |
| 425 | Update code to use new name. |
| 426 | * tic54x-dis.c (has_lkaddr, get_insn_size) |
| 427 | (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn): |
| 428 | Update code to use new name. |
| 429 | * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab): |
| 430 | Update type to new name. |
| 431 | * z8kgen.c (internal, gas): Rename variable new to new_op. |
| 432 | |
| 433 | 2009-08-28 H.J. Lu <hongjiu.lu@intel.com> |
| 434 | |
| 435 | * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS. |
| 436 | Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD. |
| 437 | (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with |
| 438 | CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD. |
| 439 | * Makefile.in: Regenerated. |
| 440 | |
| 441 | 2009-08-27 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| 442 | |
| 443 | * Makefile.am (bfdlibdir, bfdincludedir): Move definition ... |
| 444 | [INSTALL_LIBBFD]: ... here, ... |
| 445 | [INSTALL_LIBBFD]: ... and empty overrides here. |
| 446 | [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable. |
| 447 | [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it. |
| 448 | * Makefile.in: Regenerate. |
| 449 | * configure: Regenerate. |
| 450 | |
| 451 | 2009-08-26 Philippe De Muyter <phdm@macqel.be> |
| 452 | |
| 453 | * m68k-dis.c (print_insn_arg): Add movecr register names for |
| 454 | coldfire v4e families. |
| 455 | |
| 456 | 2009-08-25 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| 457 | |
| 458 | * Makefile.am (SUBDIRS): Build '.' before 'po'. |
| 459 | (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY) |
| 460 | (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables. |
| 461 | (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite |
| 462 | using *BUILD variables, depend upon $(BUILD_LIBIBERTY). |
| 463 | (i386-gen.o): New rule. |
| 464 | ($(srcdir)/i386-init.h): Adjust. |
| 465 | (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h. |
| 466 | (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise. |
| 467 | (ia64-gen.o): New rule. |
| 468 | (ia64_asmtab_deps): New variable. |
| 469 | ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise. |
| 470 | (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c. |
| 471 | (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust |
| 472 | likewise. |
| 473 | (s390-opc.tab): Adjust. |
| 474 | (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New |
| 475 | rules. |
| 476 | (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h. |
| 477 | * Makefile.in: Regenerate. |
| 478 | * z8kgen.c (gas): Avoid '/*' in comment. |
| 479 | * z8k-opc.h (func): Regenerate. |
| 480 | |
| 481 | 2009-08-24 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| 482 | |
| 483 | * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken |
| 484 | from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c, |
| 485 | i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c, |
| 486 | ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and |
| 487 | msp430-dis.c added. |
| 488 | (LIBOPCODES_CFILES): New variable, adding to |
| 489 | TARGET_LIBOPCODES_CFILES also non-target library sources. |
| 490 | (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator |
| 491 | files. |
| 492 | (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES). |
| 493 | (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES). |
| 494 | * Makefile.in: Regenerate. |
| 495 | * po/POTFILES.in: Regenerate. |
| 496 | |
| 497 | 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| 498 | |
| 499 | * Makefile.am (libopcodes_la_LDFLAGS): Initialize early. |
| 500 | [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition. |
| 501 | [INSTALL_LIBBFD] (bfdinclude_DATA): New. |
| 502 | [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New. |
| 503 | [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la |
| 504 | is built shared even if it is not to be installed. |
| 505 | (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES) |
| 506 | (install_libopcodes, uninstall_libopcodes): Remove. |
| 507 | (AM_CPPFLAGS): Renamed from ... |
| 508 | (INCLUDES): ... this. |
| 509 | * Makefile.in: Regenerate. |
| 510 | |
| 511 | * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add |
| 512 | 1.11, foreign, no-dist. |
| 513 | (MKDEP, m32c_opc_h): Remove variables. |
| 514 | (disassemble.lo): Rewrite using automake-style dependency |
| 515 | tracking rules; only list the dependency upon the primary source |
| 516 | file, but no included headers. |
| 517 | (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo) |
| 518 | (i386-gen.o, ia64-gen.o): Remove dependency statements. |
| 519 | (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to |
| 520 | ensure all dependency fragments are included in the Makefile. |
| 521 | (s390-opc.lo): Depend on s390-opc.tab. |
| 522 | (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules. |
| 523 | (mkdep section): Remove. |
| 524 | * Makefile.in: Regenerate. |
| 525 | * po/POTFILES.in: Regenerate. |
| 526 | |
| 527 | * Makefile.am (install-pdf, install-html): Remove. |
| 528 | * Makefile.in: Regenerate. |
| 529 | |
| 530 | * Makefile.in: Regenerate. |
| 531 | * aclocal.m4: Likewise. |
| 532 | * config.in: Likewise. |
| 533 | * configure: Likewise. |
| 534 | |
| 535 | 2009-08-06 Michael Eager <eager@eagercon.com> |
| 536 | |
| 537 | * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to |
| 538 | CFILES, microblaze-dis.lo to ALL_MACHINES, targets. |
| 539 | * Makefile.in: Regenerate. |
| 540 | * configure.in: Add bfd_microblaze_arch target. |
| 541 | * configure: Regenerate. |
| 542 | * disassemble.c: Define ARCH_microblaze, return |
| 543 | print_insn_microblaze(). |
| 544 | * microblaze-dis.c: New MicroBlaze disassembler. |
| 545 | * microblaze-opc.h: New MicroBlaze opcode definitions. |
| 546 | * microblaze-opcm.h: New MicroBlaze opcode types. |
| 547 | |
| 548 | 2009-07-25 H.J. Lu <hongjiu.lu@intel.com> |
| 549 | |
| 550 | * configure.in: Handle bfd_l1om_arch. |
| 551 | * disassemble.c (disassembler): Likewise. |
| 552 | |
| 553 | * configure: Regenerated. |
| 554 | |
| 555 | * i386-dis.c (print_insn): Handle bfd_mach_l1om and |
| 556 | bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM. |
| 557 | |
| 558 | * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM. |
| 559 | Add CPU_L1OM_FLAGS. |
| 560 | (cpu_flags): Add CpuL1OM. |
| 561 | (set_bitfield): Take an argument to set the value field. |
| 562 | (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY). |
| 563 | (process_i386_opcode_modifier): Updated. |
| 564 | (process_i386_operand_type): Likewise. |
| 565 | * i386-init.h: Regenerated. |
| 566 | * i386-tbl.h: Likewise. |
| 567 | |
| 568 | * i386-opc.h (CpuL1OM): New. |
| 569 | (CpuXsave): Updated. |
| 570 | (i386_cpu_flags): Add cpul1om. |
| 571 | |
| 572 | 2009-07-24 Jan Beulich <jbeulich@novell.com> |
| 573 | |
| 574 | * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add |
| 575 | frstpm. |
| 576 | * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed. |
| 577 | (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP. |
| 578 | (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387. |
| 579 | * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP): |
| 580 | Define. |
| 581 | (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687, |
| 582 | and cpufisttp. |
| 583 | * i386-opc.tbl: Qualify floating point instructions by their |
| 584 | respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos, |
| 585 | and fsincos to be avilable only on 387. Fix fstsw ax to be |
| 586 | available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm, |
| 587 | and frstpm. |
| 588 | * i386-init.h, i386-tbl.h: Regenerate. |
| 589 | |
| 590 | 2009-07-20 Nick Clifton <nickc@redhat.com> |
| 591 | |
| 592 | PR 10288 |
| 593 | * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register |
| 594 | offset or indexed based addressing mode 3. |
| 595 | |
| 596 | 2009-07-14 Nick Clifton <nickc@redhat.com> |
| 597 | |
| 598 | PR 10288 |
| 599 | * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1 |
| 600 | patterns. |
| 601 | (arm_decode_shift): Catch illegal register based shifts. |
| 602 | (print_insn_arm): Properly handle negative register r0 |
| 603 | post-indexed addressing. |
| 604 | |
| 605 | 2009-07-10 Doug Kwan <dougkwan@google.com> |
| 606 | |
| 607 | * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only |
| 608 | lower 32 bits of long types to make hexadecimal output consistent |
| 609 | on both 32-bit and 64-bit hosts. |
| 610 | |
| 611 | 2009-07-10 Alan Modra <amodra@bigpond.net.au> |
| 612 | |
| 613 | * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h, |
| 614 | * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h, |
| 615 | * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h, |
| 616 | * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h, |
| 617 | * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h, |
| 618 | * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c, |
| 619 | * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c, |
| 620 | * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h, |
| 621 | * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h, |
| 622 | * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h, |
| 623 | * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h, |
| 624 | * xstormy16-opc.c, * xstormy16-opc.h: Regenerate. |
| 625 | |
| 626 | 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw> |
| 627 | |
| 628 | * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus. |
| 629 | |
| 630 | 2009-07-07 Nick Clifton <nickc@redhat.com> |
| 631 | |
| 632 | PR 10288 |
| 633 | * arm-dis.c (arm_opcodes): Be more strict about decoding scaled |
| 634 | addressing modes. |
| 635 | |
| 636 | 2009-07-06 DJ Delorie <dj@redhat.com> |
| 637 | |
| 638 | * mep-desc.c: Regenerate. |
| 639 | * mep-desc.h: Regenerate. |
| 640 | * mep-opc.c: Regenerate. |
| 641 | * mep-opc.h: Regenerate. |
| 642 | |
| 643 | 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> |
| 644 | |
| 645 | * i386-opc.h (CpuFMA4): Add CpuFMA4. |
| 646 | (i386_cpu_flags): New. |
| 647 | * i386-gen.c: Add CPU_FMA4_FLAGS. |
| 648 | * i386-opc.tbl: Add FMA4 instructions. |
| 649 | * i386-tbl.h: Regenerate. |
| 650 | * i386-init.h: Regenerate. |
| 651 | * i386-dis.c (OP_VEX_FMA): New. Handle FMA4. |
| 652 | (OP_XMM_VexW): Ditto. |
| 653 | (OP_EX_VexW): Ditto. |
| 654 | (VEXI4_Fixup): Ditto. |
| 655 | (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros. |
| 656 | (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New. |
| 657 | (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New. |
| 658 | (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New. |
| 659 | (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New. |
| 660 | (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New. |
| 661 | (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New. |
| 662 | (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New. |
| 663 | (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New. |
| 664 | (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New. |
| 665 | (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New. |
| 666 | (get_vex_imm8): New. handle FMA4. |
| 667 | (OP_EX_VexReg): Ditto. |
| 668 | |
| 669 | 2009-06-30 Nick Clifton <nickc@redhat.com> |
| 670 | |
| 671 | PR 10288 |
| 672 | * arm-dis.c (coprocessor): Print the LDC and STC versions of the |
| 673 | LFM and SFM instructions as comments,. |
| 674 | Improve consistency of formatting for instructions displayed as |
| 675 | comments and decimal values displayed with their hexadecimal |
| 676 | equivalents. |
| 677 | Formatting tidy ups. |
| 678 | |
| 679 | 2009-06-29 Nick Clifton <nickc@redhat.com> |
| 680 | |
| 681 | PR 10288 |
| 682 | * arm-dis.c (enum opcode_sentinels): New: Used to mark the |
| 683 | boundary between variaant and generic coprocessor instuctions. |
| 684 | (coprocessor): Use it. |
| 685 | Fix architecture version of MCRR and MRRC instructions. |
| 686 | (arm_opcdes): Fix patterns for STRB and STRH instructions. |
| 687 | (print_insn_coprocessor): Check architecture and extension masks. |
| 688 | Print a hexadecimal version of any decimal constant that is |
| 689 | outside of the range of -16 to +32. |
| 690 | (print_arm_address): Add a return value of the offset used in the |
| 691 | adress, if it is worth printing a hexadecimal version of it. |
| 692 | (print_insn_neon): Print a hexadecimal version of any decimal |
| 693 | constant that is outside of the range of -16 to +32. |
| 694 | (print_insn_arm): Likewise. |
| 695 | (print_insn_thumb16): Likewise. |
| 696 | (print_insn_thumb32): Likewise. |
| 697 | |
| 698 | PR 10297 |
| 699 | * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description |
| 700 | of an undefined instruction. |
| 701 | (arm_opcodes): Use it. |
| 702 | (thumb_opcod): Use it. |
| 703 | (thumb32_opc): Use it. |
| 704 | |
| 705 | 2009-06-23 DJ Delorie <dj@redhat.com> |
| 706 | |
| 707 | * mep-desc.c: Regenerate. |
| 708 | * mep-desc.h: Regenerate. |
| 709 | * mep-dis.c: Regenerate. |
| 710 | * mep-ibld.c: Regenerate. |
| 711 | * mep-opc.c: Regenerate. |
| 712 | |
| 713 | * mep-asm.c: Regenerate. |
| 714 | * mep-opc.c: Regenerate. |
| 715 | * mep-opc.h: Regenerate. |
| 716 | |
| 717 | 2009-06-22 Nick Clifton <nickc@redhat.com> |
| 718 | |
| 719 | * po/fi.po: Updated Finish translation. |
| 720 | |
| 721 | 2009-06-22 Alan Modra <amodra@bigpond.net.au> |
| 722 | |
| 723 | * m32c-asm.c: Regenerate. |
| 724 | |
| 725 | 2009-06-22 Alan Modra <amodra@bigpond.net.au> |
| 726 | |
| 727 | * score-dis.c (print_insn_score48, print_insn_score32): Move default |
| 728 | case label to proper lexical block. |
| 729 | * score7-dis.c (print_insn_score32): Likewise. |
| 730 | |
| 731 | 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com> |
| 732 | |
| 733 | * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT, |
| 734 | MASK_RX_0RRD_OPT): New instruction formats with optional arguments. |
| 735 | * s390-opc.txt (nopr, nop): Use new instruction format. |
| 736 | |
| 737 | 2009-06-18 Nick Clifton <nickc@redhat.com> |
| 738 | |
| 739 | PR 10288 |
| 740 | * arm-dis.c (print_insn_coprocessor): Check that a user specified |
| 741 | ARM architecture supports the matched instruction. |
| 742 | (print_insn_arm): Likewise. |
| 743 | (select_arm_features): New function. Fills in the fields of an |
| 744 | arm_feature_set structure based on a given arm machine number. |
| 745 | (print_insn): Initialise an arm_feature_set structure. |
| 746 | |
| 747 | 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org> |
| 748 | |
| 749 | * vax-dis.c (is_function_entry): Return success for synthetic |
| 750 | symbols too. |
| 751 | (is_plt_tail): New function. |
| 752 | (print_insn_vax): Decode PLT entry offset longword. |
| 753 | |
| 754 | 2009-06-15 Nick Clifton <nickc@redhat.com> |
| 755 | |
| 756 | PR 10186 |
| 757 | * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W |
| 758 | instruction. |
| 759 | |
| 760 | PR 10173 |
| 761 | * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice. |
| 762 | |
| 763 | 2009-06-15 Nick Clifton <nickc@redhat.com> |
| 764 | |
| 765 | PR 10263 |
| 766 | * arm-dis.c (print_insn): Ignore is_data if the user has requested |
| 767 | the disassembly of data as well as instructions. |
| 768 | |
| 769 | 2009-06-11 Doug Evans <dje@sebabeach.org> |
| 770 | |
| 771 | * cgen.sh: Handle multiple simultaneous runs for parallel makes. |
| 772 | |
| 773 | 2009-06-11 Anthony Green <green@moxielogic.com> |
| 774 | |
| 775 | * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions. |
| 776 | (moxie_form3_opc_info): Add branch instructions. |
| 777 | * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL |
| 778 | encoded instructions. |
| 779 | |
| 780 | 2009-06-06 Anthony Green <green@moxielogic.com> |
| 781 | |
| 782 | * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M. |
| 783 | * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case. |
| 784 | |
| 785 | 2009-06-04 Alan Modra <amodra@bigpond.net.au> |
| 786 | |
| 787 | * dep-in.sed: Don't use \n in replacement part of s command. |
| 788 | * Makefile.am (DEP1): LC_ALL for uniq. |
| 789 | * Makefile.in: Regenerate. |
| 790 | |
| 791 | 2009-06-02 Nick Clifton <nickc@redhat.com> |
| 792 | |
| 793 | * po/nl.po: Updated Dutch translation. |
| 794 | |
| 795 | 2009-06-02 Tristan Gingold <gingold@adacore.com> |
| 796 | |
| 797 | * ia64-gen.c (parse_resource_users, print_dependency_table, |
| 798 | add_dis_table_ent, finish_distable, insert_bit_table_ent, |
| 799 | add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq, |
| 800 | get_prefix_len, compute_completer_bits, insert_opcode_dependencies, |
| 801 | insert_completer_entry, print_completer_entry, print_completer_table, |
| 802 | opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions. |
| 803 | |
| 804 | 2009-05-28 DJ Delorie <dj@redhat.com> |
| 805 | |
| 806 | * mep-asm.c: Regenerate. |
| 807 | * mep-desc.c: Regenerate. |
| 808 | |
| 809 | 2009-05-26 DJ Delorie <dj@redhat.com> |
| 810 | |
| 811 | * mep-asm.c: Regenerate. |
| 812 | * mep-desc.c: Regenerate. |
| 813 | * mep-desc.h: Regenerate. |
| 814 | * mep-dis.c: Regenerate. |
| 815 | * mep-ibld.c: Regenerate. |
| 816 | * mep-opc.c: Regenerate. |
| 817 | * mep-opc.h: Regenerate. |
| 818 | |
| 819 | 2009-05-26 Nick Clifton <nickc@redhat.com> |
| 820 | |
| 821 | * po/id.po: Updated Indonesian translation. |
| 822 | * po/opcodes.pot: Updated template file. |
| 823 | |
| 824 | 2009-05-26 Alan Modra <amodra@bigpond.net.au> |
| 825 | |
| 826 | * dep-in.sed: Don't modify .o to .lo here. Output one filename |
| 827 | per line with all lines having continuation backslash. Prefix |
| 828 | first line with "A", following lines with "B". |
| 829 | * Makefile.am (DEP): Don't use dep.sed here. |
| 830 | (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use |
| 831 | dep.sed here on dependencies, sort and uniq. |
| 832 | * Makefile.in: Regenerate. |
| 833 | |
| 834 | 2009-05-25 Tristan Gingold <gingold@adacore.com> |
| 835 | |
| 836 | * makefile.vms (OPT): New variable. |
| 837 | (CFLAGS): Update compilation flags. |
| 838 | |
| 839 | 2009-05-22 DJ Delorie <dj@redhat.com> |
| 840 | |
| 841 | * mep-asm.c: Regenerate. |
| 842 | * mep-desc.c: Regenerate. |
| 843 | * mep-desc.h: Regenerate. |
| 844 | * mep-dis.c: Regenerate. |
| 845 | * mep-ibld.c: Regenerate. |
| 846 | * mep-opc.c: Regenerate. |
| 847 | * mep-opc.h: Regenerate. |
| 848 | |
| 849 | 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> |
| 850 | |
| 851 | * i386-opc.h (Cpusse5): Delete. |
| 852 | (i386_cpu_flags): Delete. |
| 853 | * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc. |
| 854 | * i386-opc.tbl: Remove SSE5 instructions. |
| 855 | * i386-tbl.h: Regenerate. |
| 856 | * i386-init.h: Regenerate. |
| 857 | * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling. |
| 858 | (print_drex_arg): Delete. |
| 859 | (OP_DREX4): Delete. |
| 860 | (OP_DREX3): Delete. |
| 861 | (OP_DREX_ICMP): Delete. |
| 862 | (OP_DREX_FCMP): Delete. |
| 863 | (DREX_*): Delete. |
| 864 | (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete. |
| 865 | |
| 866 | 2009-05-22 Alan Modra <amodra@bigpond.net.au> |
| 867 | |
| 868 | * Makefile.am: Run "make dep-am". |
| 869 | * Makefile.in: Regenerate. |
| 870 | * po/POTFILES.in: Regenerate. |
| 871 | |
| 872 | 2009-05-19 DJ Delorie <dj@redhat.com> |
| 873 | |
| 874 | * mep-asm.c: Regenerate. |
| 875 | * mep-opc.c: Regenerate. |
| 876 | |
| 877 | 2009-04-30 DJ Delorie <dj@redhat.com> |
| 878 | |
| 879 | * mep-asm.c: Regenerate. |
| 880 | * mep-desc.c: Regenerate. |
| 881 | * mep-desc.h: Regenerate. |
| 882 | * mep-dis.c: Regenerate. |
| 883 | * mep-ibld.c: Regenerate. |
| 884 | * mep-opc.c: Regenerate. |
| 885 | * mep-opc.h: Regenerate. |
| 886 | |
| 887 | 2009-04-17 DJ Delorie <dj@redhat.com |
| 888 | |
| 889 | * mep-desc.c: Regenerate. |
| 890 | * mep-ibld.c: Regenerate. |
| 891 | * mep-opc.c: Regenerate. |
| 892 | * mep-opc.h: Regenerate. |
| 893 | |
| 894 | 2009-04-15 Anthony Green <green@moxielogic.com> |
| 895 | |
| 896 | * moxie-opc.c, moxie-dis.c: Created. |
| 897 | * Makefile.am: Build the moxie source files. |
| 898 | * configure.in: Add moxie support. |
| 899 | * Makefile.in, configure: Rebuilt. |
| 900 | * disassemble.c (disassembler): Add moxie support. |
| 901 | (ARCH_moxie): Define. |
| 902 | |
| 903 | 2009-04-15 Jan Beulich <jbeulich@novell.com> |
| 904 | |
| 905 | * i386-opc.tbl (protb, protw, protd, protq): Set opcode |
| 906 | extension to None. |
| 907 | (pshab, pshaw, pshad, pshaq): Likewise. |
| 908 | * i386-tbl.h: Re-generate. |
| 909 | |
| 910 | 2009-04-08 DJ Delorie <dj@redhat.com |
| 911 | |
| 912 | * mep-asm.c: Regenerate. |
| 913 | * mep-desc.c: Regenerate. |
| 914 | * mep-desc.h: Regenerate. |
| 915 | * mep-dis.c: Regenerate. |
| 916 | * mep-ibld.c: Regenerate. |
| 917 | * mep-opc.c: Regenerate. |
| 918 | * mep-opc.h: Regenerate. |
| 919 | |
| 920 | 2009-04-07 Peter Bergner <bergner@vnet.ibm.com> |
| 921 | |
| 922 | * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva", |
| 923 | "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation. |
| 924 | Reorder entries so the extended mnemonics are listed before tlbilx. |
| 925 | |
| 926 | 2009-04-02 Peter Bergner <bergner@vnet.ibm.com> |
| 927 | |
| 928 | * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect |
| 929 | due to -many/-Many. |
| 930 | (print_insn_powerpc): Make sure we only deprecate instructions using |
| 931 | the original dialect and not a modified dialect due to -Many handling. |
| 932 | Move the handling of the condition register and default operands to |
| 933 | the end of the if/else if/else chain. |
| 934 | * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that |
| 935 | instructions from newer processors are listed before older ones. |
| 936 | <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors |
| 937 | that have instructions with conflicting opcodes. |
| 938 | |
| 939 | 2009-04-01 Peter Bergner <bergner@vnet.ibm.com> |
| 940 | |
| 941 | * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and |
| 942 | E500MC entries. |
| 943 | |
| 944 | 2009-04-01 Christophe Lyon <christophe.lyon@st.com> |
| 945 | |
| 946 | * arm-dis.c (print_insn): Print BE8 opcodes in little endianness. |
| 947 | |
| 948 | 2009-03-30 Joseph Myers <joseph@codesourcery.com> |
| 949 | |
| 950 | * arm-dis.c (print_insn): Also check section matches in backwards |
| 951 | search for mapping symbol. |
| 952 | |
| 953 | 2009-03-26 H.J. Lu <hongjiu.lu@intel.com> |
| 954 | |
| 955 | * i386-dis.c (get_valid_dis386): Abort on unhandled table. |
| 956 | |
| 957 | 2009-03-18 Alan Modra <amodra@bigpond.net.au> |
| 958 | |
| 959 | * cgen-opc.c: Include alloca-conf.h rather than alloca.h. |
| 960 | * Makefile.am: Run "make dep-am". |
| 961 | * Makefile.in: Regenerate. |
| 962 | * openrisc-opc.c: Regenerate. |
| 963 | |
| 964 | 2009-03-10 Nick Clifton <nickc@redhat.com> |
| 965 | |
| 966 | * po/id.po: Updated Indonesian translation. |
| 967 | |
| 968 | 2009-03-10 Alan Modra <amodra@bigpond.net.au> |
| 969 | |
| 970 | * ppc-dis.c: Include "opintl.h". |
| 971 | (struct ppc_mopt, ppc_opts): New. |
| 972 | (ppc_parse_cpu): New function. |
| 973 | (powerpc_init_dialect): Use it. |
| 974 | (print_ppc_disassembler_options): Dump options from ppc_opts. |
| 975 | Internationalize message. |
| 976 | |
| 977 | 2009-03-06 Nick Clifton <nickc@redhat.com> |
| 978 | |
| 979 | * po/es.po: Updated Spanish translation. |
| 980 | |
| 981 | 2009-03-04 Alan Modra <amodra@bigpond.net.au> |
| 982 | |
| 983 | PR 6768 |
| 984 | * configure.in: Test for ld --as-needed support. Link shared |
| 985 | libopcodes against libm. |
| 986 | * configure: Regenerate. |
| 987 | |
| 988 | 2009-03-03 Peter Bergner <bergner@vnet.ibm.com> |
| 989 | |
| 990 | * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that |
| 991 | instructions from newer processors are listed before older ones. |
| 992 | |
| 993 | 2009-03-03 Alan Modra <amodra@bigpond.net.au> |
| 994 | |
| 995 | * Makefile.am: Run "make dep-am". |
| 996 | (HFILES): Move lm32-desc.h and lm32-opc.h from.. |
| 997 | (CFILES): ..here. |
| 998 | * Makefile.in: Regenerate. |
| 999 | |
| 1000 | 2009-03-02 Qinwei <qinwei@sunnorth.com.cn> |
| 1001 | |
| 1002 | * score7-dis.c: New file. |
| 1003 | * Makefile.am: Add dependencies for score7-dis.c. |
| 1004 | * Makefile.in: Regenerate. |
| 1005 | * configure.in: Add score7-dis to score files. |
| 1006 | * configure: Regenerate. |
| 1007 | * score-dis.c: Add support for score7 architecture. |
| 1008 | * score-opc.h: Likewise. |
| 1009 | |
| 1010 | 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| 1011 | |
| 1012 | * configure: Regenerate. |
| 1013 | |
| 1014 | 2009-02-27 H.J. Lu <hongjiu.lu@intel.com> |
| 1015 | |
| 1016 | * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E. |
| 1017 | |
| 1018 | 2009-02-26 Peter Bergner <bergner@vnet.ibm.com> |
| 1019 | |
| 1020 | * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble |
| 1021 | the power7 and the isel instructions. |
| 1022 | * ppc-opc.c (insert_xc6, extract_xc6): New static functions. |
| 1023 | (insert_dm, extract_dm): Likewise. |
| 1024 | (XB6): Update comment to include XX2 form. |
| 1025 | (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK, |
| 1026 | XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New. |
| 1027 | (RemoveXX3DM): Delete. |
| 1028 | (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr", |
| 1029 | "mftgpr">: Deprecate for POWER7. |
| 1030 | <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte", |
| 1031 | "frsqrte.">: Deprecate the three operand form and enable the two |
| 1032 | operand form for POWER7 and later. |
| 1033 | <"wait">: Extend to accept optional parameter. Enable for POWER7. |
| 1034 | <"waitsrv", "waitimpl">: Add extended opcodes. |
| 1035 | <"ldbrx", "stdbrx">: Enable for POWER7. |
| 1036 | <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes. |
| 1037 | <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde", |
| 1038 | "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo", |
| 1039 | "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.", |
| 1040 | "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.", |
| 1041 | "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.", |
| 1042 | "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx", |
| 1043 | "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes. |
| 1044 | <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx", |
| 1045 | "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp", |
| 1046 | "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds", |
| 1047 | "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp", |
| 1048 | "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp", |
| 1049 | "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp", |
| 1050 | "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic", |
| 1051 | "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp", |
| 1052 | "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp", |
| 1053 | "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp", |
| 1054 | "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.", |
| 1055 | "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp", |
| 1056 | "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp", |
| 1057 | "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp", |
| 1058 | "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp", |
| 1059 | "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp", |
| 1060 | "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp", |
| 1061 | "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp", |
| 1062 | "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp", |
| 1063 | "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp", |
| 1064 | "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi", |
| 1065 | "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp", |
| 1066 | "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp", |
| 1067 | "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp", |
| 1068 | "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor", |
| 1069 | "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd", |
| 1070 | "xxspltw", "xxswapd">: Add VSX opcodes. |
| 1071 | |
| 1072 | 2009-02-23 H.J. Lu <hongjiu.lu@intel.com> |
| 1073 | |
| 1074 | * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4. |
| 1075 | (operand_types): Remove Vex_Imm4. |
| 1076 | |
| 1077 | * i386-opc.h (Vex_Imm4): Removed. |
| 1078 | (OTMax): Updated. |
| 1079 | (i386_operand_type): Remove vex_imm4. |
| 1080 | |
| 1081 | * i386-opc.tbl: Remove Vex_Imm4 comments. |
| 1082 | * i386-init.h: Regenerated. |
| 1083 | * i386-tbl.h: Likewise. |
| 1084 | |
| 1085 | 2009-02-23 Richard Earnshaw <rearnsha@arm.com> |
| 1086 | |
| 1087 | * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for |
| 1088 | vq{r}shr{u}n.s64 insnstructions. |
| 1089 | |
| 1090 | 2009-02-19 Peter Bergner <bergner@vnet.ibm.com> |
| 1091 | |
| 1092 | * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first |
| 1093 | operand to be a float point register (FRT/FRS). |
| 1094 | |
| 1095 | 2009-02-18 Adam Nemet <anemet@caviumnetworks.com> |
| 1096 | |
| 1097 | * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific |
| 1098 | dmfc2 and dmtc2 before the architecture-level variants. |
| 1099 | |
| 1100 | 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr> |
| 1101 | |
| 1102 | * fr30-opc.c: Regenerate. |
| 1103 | * frv-opc.c: Regenerate. |
| 1104 | * ip2k-opc.c: Regenerate. |
| 1105 | * iq2000-opc.c: Regenerate. |
| 1106 | * lm32-opc.c: Regenerate. |
| 1107 | * m32c-opc.c: Regenerate. |
| 1108 | * m32r-opc.c: Regenerate. |
| 1109 | * mep-opc.c: Regenerate. |
| 1110 | * mt-opc.c: Regenerate. |
| 1111 | * xc16x-opc.c: Regenerate. |
| 1112 | * xstormy16-opc.c: Regenerate. |
| 1113 | * tic54x-dis.c (print_instruction): Avoid compiler warning on |
| 1114 | sprintf call. |
| 1115 | |
| 1116 | 2009-02-12 Nathan Sidwell <nathan@codesourcery.com> |
| 1117 | |
| 1118 | * m68k-opc.c (m68k_opcodes): Add stldsr instruction. |
| 1119 | |
| 1120 | 2009-02-05 Peter Bergner <bergner@vnet.ibm.com> |
| 1121 | |
| 1122 | * ppc-opc.c: Update copyright year. |
| 1123 | (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand |
| 1124 | ordering for POWER4 and later and use the correct Server ordering. |
| 1125 | |
| 1126 | 2009-02-04 H.J. Lu <hongjiu.lu@intel.com> |
| 1127 | |
| 1128 | AVX Programming Reference (January, 2009) |
| 1129 | * i386-dis.c (PREFIX_VEX_3A44): New. |
| 1130 | (VEX_LEN_3A44_P_2): Likewise. |
| 1131 | (PREFIX_VEX_3A48): Updated. |
| 1132 | (VEX_LEN_3A4C_P_2): Likewise. |
| 1133 | (prefix_table): Add PREFIX_VEX_3A44. |
| 1134 | (vex_table): Likewise. |
| 1135 | (vex_len_table): Add VEX_LEN_3A44_P_2. |
| 1136 | |
| 1137 | * i386-opc.tbl: Add PCLMUL + AVX instructions. |
| 1138 | * i386-tbl.h: Regenerated. |
| 1139 | |
| 1140 | 2009-02-03 Sandip Matte <sandip@rmicorp.com> |
| 1141 | |
| 1142 | * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define. |
| 1143 | (mips_arch_choices): Add XLR entry. |
| 1144 | * mips-opc.c (XLR): Define. |
| 1145 | (mips_builtin_opcodes): Add XLR instructions. |
| 1146 | |
| 1147 | 2009-02-03 Carlos O'Donell <carlos@codesourcery.com> |
| 1148 | |
| 1149 | * Makefile.am: Add install-pdf target. |
| 1150 | * po/Make-in: Add install-pdf target. |
| 1151 | * Makefile.in: Regenerate. |
| 1152 | |
| 1153 | 2009-02-02 DJ Delorie <dj@redhat.com> |
| 1154 | |
| 1155 | * mep-asm.c: Regenerate. |
| 1156 | * mep-desc.c: Regenerate. |
| 1157 | * mep-desc.h: Regenerate. |
| 1158 | * mep-dis.c: Regenerate. |
| 1159 | * mep-ibld.c: Regenerate. |
| 1160 | * mep-opc.c: Regenerate. |
| 1161 | * mep-opc.h: Regenerate. |
| 1162 | |
| 1163 | 2009-01-29 Mark Mitchell <mark@codesourcery.com> |
| 1164 | |
| 1165 | * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd, |
| 1166 | qsub, and qdsub. |
| 1167 | |
| 1168 | 2009-01-28 Chao-ying Fu <fu@mips.com> |
| 1169 | |
| 1170 | * mips-opc.c (suxc1): Add the flag of FP_D. |
| 1171 | |
| 1172 | 2009-01-20 Alan Modra <amodra@bigpond.net.au> |
| 1173 | |
| 1174 | * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c, |
| 1175 | * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c, |
| 1176 | * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c, |
| 1177 | * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c, |
| 1178 | * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c, |
| 1179 | * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c, |
| 1180 | * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c, |
| 1181 | * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate. |
| 1182 | |
| 1183 | 2009-01-16 Alan Modra <amodra@bigpond.net.au> |
| 1184 | |
| 1185 | * configure.in (commonbfdlib): Delete. |
| 1186 | (SHARED_LIBADD): Add pic libiberty if such is available. |
| 1187 | * configure: Regenerate. |
| 1188 | * po/POTFILES.in: Regenerate. |
| 1189 | |
| 1190 | 2009-01-14 Peter Bergner <bergner@vnet.ibm.com> |
| 1191 | |
| 1192 | * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated. |
| 1193 | * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two |
| 1194 | operand form and enable the four operand form for POWER6 and later. |
| 1195 | <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the |
| 1196 | three operand form for POWER6 and later. |
| 1197 | |
| 1198 | 2009-01-14 Mike Frysinger <vapier@gentoo.org> |
| 1199 | |
| 1200 | * bfin-dis.c (OUTS): Use "%s" as format string. |
| 1201 | |
| 1202 | 2009-01-13 H.J. Lu <hongjiu.lu@intel.com> |
| 1203 | |
| 1204 | * i386-gen.c (cpu_flag_init): Remove a white space. |
| 1205 | (operand_type_init): Likewise. |
| 1206 | |
| 1207 | 2009-01-12 H.J. Lu <hongjiu.lu@intel.com> |
| 1208 | |
| 1209 | * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence. |
| 1210 | * i386-tbl.h: Regenerated. |
| 1211 | |
| 1212 | 2009-01-12 H.J. Lu <hongjiu.lu@intel.com> |
| 1213 | |
| 1214 | * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB, |
| 1215 | subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS, |
| 1216 | subS, xorS and cmpS. |
| 1217 | |
| 1218 | 2009-01-10 H.J. Lu <hongjiu.lu@intel.com> |
| 1219 | |
| 1220 | * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with |
| 1221 | CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add |
| 1222 | CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS. |
| 1223 | (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush |
| 1224 | and CpuSYSCALL. |
| 1225 | (lineno): Removed. |
| 1226 | (set_bitfield): Take an argument, lineno. Don't report lineno |
| 1227 | on error if it is -1. |
| 1228 | (process_i386_cpu_flag): Take an argument, lineno. |
| 1229 | (process_i386_opcode_modifier): Likewise. |
| 1230 | (process_i386_operand_type): Likewise. |
| 1231 | (output_i386_opcode): Likewise. |
| 1232 | (opcode_hash_entry): Add lineno. |
| 1233 | (process_i386_opcodes): Updated. |
| 1234 | (process_i386_registers): Likewise. |
| 1235 | (process_i386_initializers): Likewise. |
| 1236 | |
| 1237 | * i386-opc.h (CpuP4): Removed. |
| 1238 | (CpuK6): Likewise. |
| 1239 | (CpuK8): Likewise. |
| 1240 | (CpuClflush): New. |
| 1241 | (CpuSYSCALL): Likewise. |
| 1242 | (CpuMMX): Updated. |
| 1243 | (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add |
| 1244 | cpuclflush and cpusyscall. |
| 1245 | |
| 1246 | * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause, |
| 1247 | syscall and sysret. |
| 1248 | * i386-init.h: Regenerated. |
| 1249 | * i386-tbl.h: Likewise. |
| 1250 | |
| 1251 | 2009-01-09 H.J. Lu <hongjiu.lu@intel.com> |
| 1252 | |
| 1253 | * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS |
| 1254 | and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS. |
| 1255 | (cpu_flags): Add CpuRdtscp. |
| 1256 | (set_bitfield): Remove CpuSledgehammer check. |
| 1257 | |
| 1258 | * i386-opc.h (CpuRdtscp): New. |
| 1259 | (CpuLM): Updated. |
| 1260 | (i386_cpu_flags): Add cpurdtscp. |
| 1261 | |
| 1262 | * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp. |
| 1263 | * i386-init.h: Regenerated. |
| 1264 | * i386-tbl.h: Likewise. |
| 1265 | |
| 1266 | 2009-01-09 Peter Bergner <bergner@vnet.ibm.com> |
| 1267 | |
| 1268 | * ppc-opc.c (PPCNONE): Define. |
| 1269 | (NOPOWER4): Delete. |
| 1270 | (powerpc_opcodes): Initialize the new "deprecated" field. |
| 1271 | |
| 1272 | 2009-01-06 H.J. Lu <hongjiu.lu@intel.com> |
| 1273 | |
| 1274 | AVX Programming Reference (December, 2008) |
| 1275 | * i386-dis.c (VEX_LEN_2B_M_0): Removed. |
| 1276 | (VEX_LEN_E7_P_2_M_0): Likewise. |
| 1277 | (VEX_LEN_2C_P_1): Updated. |
| 1278 | (VEX_LEN_E8_P_2): Likewise. |
| 1279 | (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0. |
| 1280 | (mod_table): Likewise. |
| 1281 | |
| 1282 | * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps. |
| 1283 | * i386-tbl.h: Regenerated. |
| 1284 | |
| 1285 | 2009-01-05 H.J. Lu <hongjiu.lu@intel.com> |
| 1286 | |
| 1287 | * i386-gen.c (process_copyright): Update for 2009. |
| 1288 | |
| 1289 | * i386-init.h: Regenerated. |
| 1290 | * i386-tbl.h: Likewise. |
| 1291 | |
| 1292 | 2009-01-05 H.J. Lu <hongjiu.lu@intel.com> |
| 1293 | |
| 1294 | AVX Programming Reference (December, 2008) |
| 1295 | * i386-dis.c (OP_VEX_FMA): Removed. |
| 1296 | (OP_EX_VexW): Likewise. |
| 1297 | (OP_EX_VexImmW): Likewise. |
| 1298 | (OP_XMM_VexW): Likewise. |
| 1299 | (VEXI4_Fixup): Likewise. |
| 1300 | (VPERMIL2_Fixup): Likewise. |
| 1301 | (VexI4): Likewise. |
| 1302 | (VexFMA): Likewise. |
| 1303 | (Vex128FMA): Likewise. |
| 1304 | (EXVexW): Likewise. |
| 1305 | (EXdVexW): Likewise. |
| 1306 | (EXqVexW): Likewise. |
| 1307 | (EXVexImmW): Likewise. |
| 1308 | (XMVexW): Likewise. |
| 1309 | (VPERMIL2): Likewise. |
| 1310 | (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise. |
| 1311 | (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise. |
| 1312 | (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise. |
| 1313 | (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise. |
| 1314 | (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise. |
| 1315 | (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise. |
| 1316 | (get_vex_imm8): Likewise. |
| 1317 | (OP_EX_VexReg): Likewise. |
| 1318 | vpermil2_op): Likewise. |
| 1319 | (EXVexWdq): New. |
| 1320 | (vex_w_dq_mode): Likewise. |
| 1321 | (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise. |
| 1322 | (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise. |
| 1323 | (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise. |
| 1324 | (es_reg): Updated. |
| 1325 | (PREFIX_VEX_38DB): Likewise. |
| 1326 | (PREFIX_VEX_3A4A): Likewise. |
| 1327 | (PREFIX_VEX_3A60): Likewise. |
| 1328 | (PREFIX_VEX_3ADF): Likewise. |
| 1329 | (VEX_LEN_3ADF_P_2): Likewise. |
| 1330 | (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A, |
| 1331 | PREFIX_VEX_3A5C...PREFIX_VEX_3A5F, |
| 1332 | PREFIX_VEX_3A68...PREFIX_VEX_3A6F and |
| 1333 | PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add |
| 1334 | PREFIX_VEX_3896...PREFIX_VEX_389F, |
| 1335 | PREFIX_VEX_38A6...PREFIX_VEX_38AF and |
| 1336 | PREFIX_VEX_38B6...PREFIX_VEX_38BF. |
| 1337 | (vex_table): Likewise. |
| 1338 | (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2 |
| 1339 | and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2. |
| 1340 | (putop): Support "%XW". |
| 1341 | (intel_operand_size): Handle vex_w_dq_mode. |
| 1342 | |
| 1343 | * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS. |
| 1344 | |
| 1345 | * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA |
| 1346 | instructions. Add new FMA instructions. |
| 1347 | * i386-tbl.h: Regenerated. |
| 1348 | |
| 1349 | 2009-01-02 Matthias Klose <doko@ubuntu.com> |
| 1350 | |
| 1351 | * or32-opc.c (or32_print_register, or32_print_immediate, |
| 1352 | disassemble_insn): Don't rely on undefined sprintf behaviour. |
| 1353 | |
| 1354 | For older changes see ChangeLog-2008 |
| 1355 | \f |
| 1356 | Local Variables: |
| 1357 | mode: change-log |
| 1358 | left-margin: 8 |
| 1359 | fill-column: 74 |
| 1360 | version-control: never |
| 1361 | End: |