| 1 | /* Disassembler code for CRIS. |
| 2 | Copyright 2000, 2001, 2002 Free Software Foundation, Inc. |
| 3 | Contributed by Axis Communications AB, Lund, Sweden. |
| 4 | Written by Hans-Peter Nilsson. |
| 5 | |
| 6 | This file is part of the GNU binutils and GDB, the GNU debugger. |
| 7 | |
| 8 | This program is free software; you can redistribute it and/or modify it under |
| 9 | the terms of the GNU General Public License as published by the Free |
| 10 | Software Foundation; either version 2, or (at your option) |
| 11 | any later version. |
| 12 | |
| 13 | This program is distributed in the hope that it will be useful, but WITHOUT |
| 14 | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 15 | FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 16 | more details. |
| 17 | |
| 18 | You should have received a copy of the GNU General Public License |
| 19 | along with this program; if not, write to the Free Software |
| 20 | Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ |
| 21 | |
| 22 | #include "dis-asm.h" |
| 23 | #include "sysdep.h" |
| 24 | #include "opcode/cris.h" |
| 25 | #include "libiberty.h" |
| 26 | \f |
| 27 | /* No instruction will be disassembled longer than this. In theory, and |
| 28 | in silicon, address prefixes can be cascaded. In practice, cascading |
| 29 | is not used by GCC, and not supported by the assembler. */ |
| 30 | #ifndef MAX_BYTES_PER_CRIS_INSN |
| 31 | #define MAX_BYTES_PER_CRIS_INSN 8 |
| 32 | #endif |
| 33 | |
| 34 | /* Whether or not to decode prefixes, folding it into the following |
| 35 | instruction. FIXME: Make this optional later. */ |
| 36 | #ifndef PARSE_PREFIX |
| 37 | #define PARSE_PREFIX 1 |
| 38 | #endif |
| 39 | |
| 40 | /* Sometimes we prefix all registers with this character. */ |
| 41 | #define REGISTER_PREFIX_CHAR '$' |
| 42 | |
| 43 | /* Whether or not to trace the following sequence: |
| 44 | sub* X,r%d |
| 45 | bound* Y,r%d |
| 46 | adds.w [pc+r%d.w],pc |
| 47 | |
| 48 | This is the assembly form of a switch-statement in C. |
| 49 | The "sub is optional. If there is none, then X will be zero. |
| 50 | X is the value of the first case, |
| 51 | Y is the number of cases (including default). |
| 52 | |
| 53 | This results in case offsets printed on the form: |
| 54 | case N: -> case_address |
| 55 | where N is an estimation on the corresponding 'case' operand in C, |
| 56 | and case_address is where execution of that case continues after the |
| 57 | sequence presented above. |
| 58 | |
| 59 | The old style of output was to print the offsets as instructions, |
| 60 | which made it hard to follow "case"-constructs in the disassembly, |
| 61 | and caused a lot of annoying warnings about undefined instructions. |
| 62 | |
| 63 | FIXME: Make this optional later. */ |
| 64 | #ifndef TRACE_CASE |
| 65 | #define TRACE_CASE 1 |
| 66 | #endif |
| 67 | |
| 68 | /* Value of first element in switch. */ |
| 69 | static long case_offset = 0; |
| 70 | |
| 71 | /* How many more case-offsets to print. */ |
| 72 | static long case_offset_counter = 0; |
| 73 | |
| 74 | /* Number of case offsets. */ |
| 75 | static long no_of_case_offsets = 0; |
| 76 | |
| 77 | /* Candidate for next case_offset. */ |
| 78 | static long last_immediate = 0; |
| 79 | |
| 80 | static int number_of_bits |
| 81 | PARAMS ((unsigned int)); |
| 82 | static char *format_hex |
| 83 | PARAMS ((unsigned long, char *)); |
| 84 | static char *format_dec |
| 85 | PARAMS ((long, char *, int)); |
| 86 | static char *format_reg |
| 87 | PARAMS ((int, char *, bfd_boolean)); |
| 88 | static int cris_constraint |
| 89 | PARAMS ((const char *, unsigned int, unsigned int)); |
| 90 | static unsigned bytes_to_skip |
| 91 | PARAMS ((unsigned int, const struct cris_opcode *)); |
| 92 | static char *print_flags |
| 93 | PARAMS ((unsigned int, char *)); |
| 94 | static void print_with_operands |
| 95 | PARAMS ((const struct cris_opcode *, unsigned int, unsigned char *, |
| 96 | bfd_vma, disassemble_info *, const struct cris_opcode *, |
| 97 | unsigned int, unsigned char *, bfd_boolean)); |
| 98 | static const struct cris_spec_reg *spec_reg_info |
| 99 | PARAMS ((unsigned int)); |
| 100 | static int print_insn_cris_generic |
| 101 | PARAMS ((bfd_vma, disassemble_info *, bfd_boolean)); |
| 102 | static int print_insn_cris_with_register_prefix |
| 103 | PARAMS ((bfd_vma, disassemble_info *)); |
| 104 | static int print_insn_cris_without_register_prefix |
| 105 | PARAMS ((bfd_vma, disassemble_info *)); |
| 106 | static const struct cris_opcode *get_opcode_entry |
| 107 | PARAMS ((unsigned int, unsigned int)); |
| 108 | |
| 109 | /* Return the descriptor of a special register. |
| 110 | FIXME: Depend on a CPU-version specific argument when all machinery |
| 111 | is in place. */ |
| 112 | |
| 113 | static const struct cris_spec_reg * |
| 114 | spec_reg_info (sreg) |
| 115 | unsigned int sreg; |
| 116 | { |
| 117 | int i; |
| 118 | for (i = 0; cris_spec_regs[i].name != NULL; i++) |
| 119 | { |
| 120 | if (cris_spec_regs[i].number == sreg) |
| 121 | return &cris_spec_regs[i]; |
| 122 | } |
| 123 | |
| 124 | return NULL; |
| 125 | } |
| 126 | |
| 127 | /* Return the number of bits in the argument. */ |
| 128 | |
| 129 | static int |
| 130 | number_of_bits (val) |
| 131 | unsigned int val; |
| 132 | { |
| 133 | int bits; |
| 134 | |
| 135 | for (bits = 0; val != 0; val &= val - 1) |
| 136 | bits++; |
| 137 | |
| 138 | return bits; |
| 139 | } |
| 140 | |
| 141 | /* Get an entry in the opcode-table. */ |
| 142 | |
| 143 | static const struct cris_opcode * |
| 144 | get_opcode_entry (insn, prefix_insn) |
| 145 | unsigned int insn; |
| 146 | unsigned int prefix_insn; |
| 147 | { |
| 148 | /* For non-prefixed insns, we keep a table of pointers, indexed by the |
| 149 | insn code. Each entry is initialized when found to be NULL. */ |
| 150 | static const struct cris_opcode **opc_table = NULL; |
| 151 | |
| 152 | const struct cris_opcode *max_matchedp = NULL; |
| 153 | const struct cris_opcode **prefix_opc_table = NULL; |
| 154 | |
| 155 | /* We hold a table for each prefix that need to be handled differently. */ |
| 156 | static const struct cris_opcode **dip_prefixes = NULL; |
| 157 | static const struct cris_opcode **bdapq_m1_prefixes = NULL; |
| 158 | static const struct cris_opcode **bdapq_m2_prefixes = NULL; |
| 159 | static const struct cris_opcode **bdapq_m4_prefixes = NULL; |
| 160 | static const struct cris_opcode **rest_prefixes = NULL; |
| 161 | |
| 162 | /* Allocate and clear the opcode-table. */ |
| 163 | if (opc_table == NULL) |
| 164 | { |
| 165 | opc_table = xmalloc (65536 * sizeof (opc_table[0])); |
| 166 | memset (opc_table, 0, 65536 * sizeof (const struct cris_opcode *)); |
| 167 | |
| 168 | dip_prefixes |
| 169 | = xmalloc (65536 * sizeof (const struct cris_opcode **)); |
| 170 | memset (dip_prefixes, 0, 65536 * sizeof (dip_prefixes[0])); |
| 171 | |
| 172 | bdapq_m1_prefixes |
| 173 | = xmalloc (65536 * sizeof (const struct cris_opcode **)); |
| 174 | memset (bdapq_m1_prefixes, 0, 65536 * sizeof (bdapq_m1_prefixes[0])); |
| 175 | |
| 176 | bdapq_m2_prefixes |
| 177 | = xmalloc (65536 * sizeof (const struct cris_opcode **)); |
| 178 | memset (bdapq_m2_prefixes, 0, 65536 * sizeof (bdapq_m2_prefixes[0])); |
| 179 | |
| 180 | bdapq_m4_prefixes |
| 181 | = xmalloc (65536 * sizeof (const struct cris_opcode **)); |
| 182 | memset (bdapq_m4_prefixes, 0, 65536 * sizeof (bdapq_m4_prefixes[0])); |
| 183 | |
| 184 | rest_prefixes |
| 185 | = xmalloc (65536 * sizeof (const struct cris_opcode **)); |
| 186 | memset (rest_prefixes, 0, 65536 * sizeof (rest_prefixes[0])); |
| 187 | } |
| 188 | |
| 189 | /* Get the right table if this is a prefix. |
| 190 | This code is connected to cris_constraints in that it knows what |
| 191 | prefixes play a role in recognition of patterns; the necessary |
| 192 | state is reflected by which table is used. If constraints |
| 193 | involving match or non-match of prefix insns are changed, then this |
| 194 | probably needs changing too. */ |
| 195 | if (prefix_insn != NO_CRIS_PREFIX) |
| 196 | { |
| 197 | const struct cris_opcode *popcodep |
| 198 | = (opc_table[prefix_insn] != NULL |
| 199 | ? opc_table[prefix_insn] |
| 200 | : get_opcode_entry (prefix_insn, NO_CRIS_PREFIX)); |
| 201 | |
| 202 | if (popcodep == NULL) |
| 203 | return NULL; |
| 204 | |
| 205 | if (popcodep->match == BDAP_QUICK_OPCODE) |
| 206 | { |
| 207 | /* Since some offsets are recognized with "push" macros, we |
| 208 | have to have different tables for them. */ |
| 209 | int offset = (prefix_insn & 255); |
| 210 | |
| 211 | if (offset > 127) |
| 212 | offset -= 256; |
| 213 | |
| 214 | switch (offset) |
| 215 | { |
| 216 | case -4: |
| 217 | prefix_opc_table = bdapq_m4_prefixes; |
| 218 | break; |
| 219 | |
| 220 | case -2: |
| 221 | prefix_opc_table = bdapq_m2_prefixes; |
| 222 | break; |
| 223 | |
| 224 | case -1: |
| 225 | prefix_opc_table = bdapq_m1_prefixes; |
| 226 | break; |
| 227 | |
| 228 | default: |
| 229 | prefix_opc_table = rest_prefixes; |
| 230 | break; |
| 231 | } |
| 232 | } |
| 233 | else if (popcodep->match == DIP_OPCODE) |
| 234 | /* We don't allow postincrement when the prefix is DIP, so use a |
| 235 | different table for DIP. */ |
| 236 | prefix_opc_table = dip_prefixes; |
| 237 | else |
| 238 | prefix_opc_table = rest_prefixes; |
| 239 | } |
| 240 | |
| 241 | if (prefix_insn != NO_CRIS_PREFIX |
| 242 | && prefix_opc_table[insn] != NULL) |
| 243 | max_matchedp = prefix_opc_table[insn]; |
| 244 | else if (prefix_insn == NO_CRIS_PREFIX && opc_table[insn] != NULL) |
| 245 | max_matchedp = opc_table[insn]; |
| 246 | else |
| 247 | { |
| 248 | const struct cris_opcode *opcodep; |
| 249 | int max_level_of_match = -1; |
| 250 | |
| 251 | for (opcodep = cris_opcodes; |
| 252 | opcodep->name != NULL; |
| 253 | opcodep++) |
| 254 | { |
| 255 | int level_of_match; |
| 256 | |
| 257 | /* We give a double lead for bits matching the template in |
| 258 | cris_opcodes. Not even, because then "move p8,r10" would |
| 259 | be given 2 bits lead over "clear.d r10". When there's a |
| 260 | tie, the first entry in the table wins. This is |
| 261 | deliberate, to avoid a more complicated recognition |
| 262 | formula. */ |
| 263 | if ((opcodep->match & insn) == opcodep->match |
| 264 | && (opcodep->lose & insn) == 0 |
| 265 | && ((level_of_match |
| 266 | = cris_constraint (opcodep->args, |
| 267 | insn, |
| 268 | prefix_insn)) |
| 269 | >= 0) |
| 270 | && ((level_of_match |
| 271 | += 2 * number_of_bits (opcodep->match |
| 272 | | opcodep->lose)) |
| 273 | > max_level_of_match)) |
| 274 | { |
| 275 | max_matchedp = opcodep; |
| 276 | max_level_of_match = level_of_match; |
| 277 | |
| 278 | /* If there was a full match, never mind looking |
| 279 | further. */ |
| 280 | if (level_of_match >= 2 * 16) |
| 281 | break; |
| 282 | } |
| 283 | } |
| 284 | /* Fill in the new entry. |
| 285 | |
| 286 | If there are changes to the opcode-table involving prefixes, and |
| 287 | disassembly then does not work correctly, try removing the |
| 288 | else-clause below that fills in the prefix-table. If that |
| 289 | helps, you need to change the prefix_opc_table setting above, or |
| 290 | something related. */ |
| 291 | if (prefix_insn == NO_CRIS_PREFIX) |
| 292 | opc_table[insn] = max_matchedp; |
| 293 | else |
| 294 | prefix_opc_table[insn] = max_matchedp; |
| 295 | } |
| 296 | |
| 297 | return max_matchedp; |
| 298 | } |
| 299 | |
| 300 | /* Format number as hex with a leading "0x" into outbuffer. */ |
| 301 | |
| 302 | static char * |
| 303 | format_hex (number, outbuffer) |
| 304 | unsigned long number; |
| 305 | char *outbuffer; |
| 306 | { |
| 307 | /* Obfuscate to avoid warning on 32-bit host, but properly truncate |
| 308 | negative numbers on >32-bit hosts. */ |
| 309 | if (sizeof (number) > 4) |
| 310 | number &= (1 << (sizeof (number) > 4 ? 32 : 1)) - 1; |
| 311 | |
| 312 | sprintf (outbuffer, "0x%lx", number); |
| 313 | |
| 314 | /* Save this value for the "case" support. */ |
| 315 | if (TRACE_CASE) |
| 316 | last_immediate = number; |
| 317 | |
| 318 | return outbuffer + strlen (outbuffer); |
| 319 | } |
| 320 | |
| 321 | /* Format number as decimal into outbuffer. Parameter signedp says |
| 322 | whether the number should be formatted as signed (!= 0) or |
| 323 | unsigned (== 0). */ |
| 324 | |
| 325 | static char * |
| 326 | format_dec (number, outbuffer, signedp) |
| 327 | long number; |
| 328 | char *outbuffer; |
| 329 | int signedp; |
| 330 | { |
| 331 | last_immediate = number; |
| 332 | sprintf (outbuffer, signedp ? "%ld" : "%lu", number); |
| 333 | |
| 334 | return outbuffer + strlen (outbuffer); |
| 335 | } |
| 336 | |
| 337 | /* Format the name of the general register regno into outbuffer. */ |
| 338 | |
| 339 | static char * |
| 340 | format_reg (regno, outbuffer_start, with_reg_prefix) |
| 341 | int regno; |
| 342 | char *outbuffer_start; |
| 343 | bfd_boolean with_reg_prefix; |
| 344 | { |
| 345 | char *outbuffer = outbuffer_start; |
| 346 | |
| 347 | if (with_reg_prefix) |
| 348 | *outbuffer++ = REGISTER_PREFIX_CHAR; |
| 349 | |
| 350 | switch (regno) |
| 351 | { |
| 352 | case 15: |
| 353 | strcpy (outbuffer, "pc"); |
| 354 | break; |
| 355 | |
| 356 | case 14: |
| 357 | strcpy (outbuffer, "sp"); |
| 358 | break; |
| 359 | |
| 360 | default: |
| 361 | sprintf (outbuffer, "r%d", regno); |
| 362 | break; |
| 363 | } |
| 364 | |
| 365 | return outbuffer_start + strlen (outbuffer_start); |
| 366 | } |
| 367 | |
| 368 | /* Return -1 if the constraints of a bitwise-matched instruction say |
| 369 | that there is no match. Otherwise return a nonnegative number |
| 370 | indicating the confidence in the match (higher is better). */ |
| 371 | |
| 372 | static int |
| 373 | cris_constraint (cs, insn, prefix_insn) |
| 374 | const char *cs; |
| 375 | unsigned int insn; |
| 376 | unsigned int prefix_insn; |
| 377 | { |
| 378 | int retval = 0; |
| 379 | int tmp; |
| 380 | int prefix_ok = 0; |
| 381 | |
| 382 | const char *s; |
| 383 | for (s = cs; *s; s++) |
| 384 | switch (*s) |
| 385 | { |
| 386 | case '!': |
| 387 | /* Do not recognize "pop" if there's a prefix. */ |
| 388 | if (prefix_insn != NO_CRIS_PREFIX) |
| 389 | return -1; |
| 390 | break; |
| 391 | |
| 392 | case 'M': |
| 393 | /* Size modifier for "clear", i.e. special register 0, 4 or 8. |
| 394 | Check that it is one of them. Only special register 12 could |
| 395 | be mismatched, but checking for matches is more logical than |
| 396 | checking for mismatches when there are only a few cases. */ |
| 397 | tmp = ((insn >> 12) & 0xf); |
| 398 | if (tmp != 0 && tmp != 4 && tmp != 8) |
| 399 | return -1; |
| 400 | break; |
| 401 | |
| 402 | case 'm': |
| 403 | if ((insn & 0x30) == 0x30) |
| 404 | return -1; |
| 405 | break; |
| 406 | |
| 407 | case 'S': |
| 408 | /* A prefix operand without side-effect. */ |
| 409 | if (prefix_insn != NO_CRIS_PREFIX && (insn & 0x400) == 0) |
| 410 | { |
| 411 | prefix_ok = 1; |
| 412 | break; |
| 413 | } |
| 414 | else |
| 415 | return -1; |
| 416 | |
| 417 | case 's': |
| 418 | case 'y': |
| 419 | /* If this is a prefixed insn with postincrement (side-effect), |
| 420 | the prefix must not be DIP. */ |
| 421 | if (prefix_insn != NO_CRIS_PREFIX) |
| 422 | { |
| 423 | if (insn & 0x400) |
| 424 | { |
| 425 | const struct cris_opcode *prefix_opcodep |
| 426 | = get_opcode_entry (prefix_insn, NO_CRIS_PREFIX); |
| 427 | |
| 428 | if (prefix_opcodep->match == DIP_OPCODE) |
| 429 | return -1; |
| 430 | } |
| 431 | |
| 432 | prefix_ok = 1; |
| 433 | } |
| 434 | break; |
| 435 | |
| 436 | case 'B': |
| 437 | /* If we don't fall through, then the prefix is ok. */ |
| 438 | prefix_ok = 1; |
| 439 | |
| 440 | /* A "push" prefix. Check for valid "push" size. |
| 441 | In case of special register, it may be != 4. */ |
| 442 | if (prefix_insn != NO_CRIS_PREFIX) |
| 443 | { |
| 444 | /* Match the prefix insn to BDAPQ. */ |
| 445 | const struct cris_opcode *prefix_opcodep |
| 446 | = get_opcode_entry (prefix_insn, NO_CRIS_PREFIX); |
| 447 | |
| 448 | if (prefix_opcodep->match == BDAP_QUICK_OPCODE) |
| 449 | { |
| 450 | int pushsize = (prefix_insn & 255); |
| 451 | |
| 452 | if (pushsize > 127) |
| 453 | pushsize -= 256; |
| 454 | |
| 455 | if (s[1] == 'P') |
| 456 | { |
| 457 | unsigned int spec_reg = (insn >> 12) & 15; |
| 458 | const struct cris_spec_reg *sregp |
| 459 | = spec_reg_info (spec_reg); |
| 460 | |
| 461 | /* For a special-register, the "prefix size" must |
| 462 | match the size of the register. */ |
| 463 | if (sregp && sregp->reg_size == (unsigned int) -pushsize) |
| 464 | break; |
| 465 | } |
| 466 | else if (s[1] == 'R') |
| 467 | { |
| 468 | if ((insn & 0x30) == 0x20 && pushsize == -4) |
| 469 | break; |
| 470 | } |
| 471 | /* FIXME: Should abort here; next constraint letter |
| 472 | *must* be 'P' or 'R'. */ |
| 473 | } |
| 474 | } |
| 475 | return -1; |
| 476 | |
| 477 | case 'D': |
| 478 | retval = (((insn >> 12) & 15) == (insn & 15)); |
| 479 | if (!retval) |
| 480 | return -1; |
| 481 | else |
| 482 | retval += 4; |
| 483 | break; |
| 484 | |
| 485 | case 'P': |
| 486 | { |
| 487 | const struct cris_spec_reg *sregp |
| 488 | = spec_reg_info ((insn >> 12) & 15); |
| 489 | |
| 490 | /* Since we match four bits, we will give a value of 4-1 = 3 |
| 491 | in a match. If there is a corresponding exact match of a |
| 492 | special register in another pattern, it will get a value of |
| 493 | 4, which will be higher. This should be correct in that an |
| 494 | exact pattern would match better than a general pattern. |
| 495 | |
| 496 | Note that there is a reason for not returning zero; the |
| 497 | pattern for "clear" is partly matched in the bit-pattern |
| 498 | (the two lower bits must be zero), while the bit-pattern |
| 499 | for a move from a special register is matched in the |
| 500 | register constraint. */ |
| 501 | |
| 502 | if (sregp != NULL) |
| 503 | { |
| 504 | retval += 3; |
| 505 | break; |
| 506 | } |
| 507 | else |
| 508 | return -1; |
| 509 | } |
| 510 | } |
| 511 | |
| 512 | if (prefix_insn != NO_CRIS_PREFIX && ! prefix_ok) |
| 513 | return -1; |
| 514 | |
| 515 | return retval; |
| 516 | } |
| 517 | |
| 518 | /* Return the length of an instruction. */ |
| 519 | |
| 520 | static unsigned |
| 521 | bytes_to_skip (insn, matchedp) |
| 522 | unsigned int insn; |
| 523 | const struct cris_opcode *matchedp; |
| 524 | { |
| 525 | /* Each insn is a word plus "immediate" operands. */ |
| 526 | unsigned to_skip = 2; |
| 527 | const char *template = matchedp->args; |
| 528 | const char *s; |
| 529 | |
| 530 | for (s = template; *s; s++) |
| 531 | if (*s == 's' && (insn & 0x400) && (insn & 15) == 15) |
| 532 | { |
| 533 | /* Immediate via [pc+], so we have to check the size of the |
| 534 | operand. */ |
| 535 | int mode_size = 1 << ((insn >> 4) & (*template == 'z' ? 1 : 3)); |
| 536 | |
| 537 | if (matchedp->imm_oprnd_size == SIZE_FIX_32) |
| 538 | to_skip += 4; |
| 539 | else if (matchedp->imm_oprnd_size == SIZE_SPEC_REG) |
| 540 | { |
| 541 | const struct cris_spec_reg *sregp |
| 542 | = spec_reg_info ((insn >> 12) & 15); |
| 543 | |
| 544 | /* FIXME: Improve error handling; should have been caught |
| 545 | earlier. */ |
| 546 | if (sregp == NULL) |
| 547 | return 2; |
| 548 | |
| 549 | /* PC is incremented by two, not one, for a byte. */ |
| 550 | to_skip += (sregp->reg_size + 1) & ~1; |
| 551 | } |
| 552 | else |
| 553 | to_skip += (mode_size + 1) & ~1; |
| 554 | } |
| 555 | else if (*s == 'b') |
| 556 | to_skip += 2; |
| 557 | |
| 558 | return to_skip; |
| 559 | } |
| 560 | |
| 561 | /* Print condition code flags. */ |
| 562 | |
| 563 | static char * |
| 564 | print_flags (insn, cp) |
| 565 | unsigned int insn; |
| 566 | char *cp; |
| 567 | { |
| 568 | /* Use the v8 (Etrax 100) flag definitions for disassembly. |
| 569 | The differences with v0 (Etrax 1..4) vs. Svinto are: |
| 570 | v0 'd' <=> v8 'm' |
| 571 | v0 'e' <=> v8 'b'. */ |
| 572 | static const char fnames[] = "cvznxibm"; |
| 573 | |
| 574 | unsigned char flagbits = (((insn >> 8) & 0xf0) | (insn & 15)); |
| 575 | int i; |
| 576 | |
| 577 | for (i = 0; i < 8; i++) |
| 578 | if (flagbits & (1 << i)) |
| 579 | *cp++ = fnames[i]; |
| 580 | |
| 581 | return cp; |
| 582 | } |
| 583 | |
| 584 | /* Print out an insn with its operands, and update the info->insn_type |
| 585 | fields. The prefix_opcodep and the rest hold a prefix insn that is |
| 586 | supposed to be output as an address mode. */ |
| 587 | |
| 588 | static void |
| 589 | print_with_operands (opcodep, insn, buffer, addr, info, prefix_opcodep, |
| 590 | prefix_insn, prefix_buffer, with_reg_prefix) |
| 591 | const struct cris_opcode *opcodep; |
| 592 | unsigned int insn; |
| 593 | unsigned char *buffer; |
| 594 | bfd_vma addr; |
| 595 | disassemble_info *info; |
| 596 | |
| 597 | /* If a prefix insn was before this insn (and is supposed to be |
| 598 | output as an address), here is a description of it. */ |
| 599 | const struct cris_opcode *prefix_opcodep; |
| 600 | unsigned int prefix_insn; |
| 601 | unsigned char *prefix_buffer; |
| 602 | bfd_boolean with_reg_prefix; |
| 603 | { |
| 604 | /* Get a buffer of somewhat reasonable size where we store |
| 605 | intermediate parts of the insn. */ |
| 606 | char temp[sizeof (".d [$r13=$r12-2147483648],$r10") * 2]; |
| 607 | char *tp = temp; |
| 608 | static const char mode_char[] = "bwd?"; |
| 609 | const char *s; |
| 610 | const char *cs; |
| 611 | |
| 612 | /* Print out the name first thing we do. */ |
| 613 | (*info->fprintf_func) (info->stream, "%s", opcodep->name); |
| 614 | |
| 615 | cs = opcodep->args; |
| 616 | s = cs; |
| 617 | |
| 618 | /* Ignore any prefix indicator. */ |
| 619 | if (*s == 'p') |
| 620 | s++; |
| 621 | |
| 622 | if (*s == 'm' || *s == 'M' || *s == 'z') |
| 623 | { |
| 624 | *tp++ = '.'; |
| 625 | |
| 626 | /* Get the size-letter. */ |
| 627 | *tp++ = *s == 'M' |
| 628 | ? (insn & 0x8000 ? 'd' |
| 629 | : insn & 0x4000 ? 'w' : 'b') |
| 630 | : mode_char[(insn >> 4) & (*s == 'z' ? 1 : 3)]; |
| 631 | |
| 632 | /* Ignore the size and the space character that follows. */ |
| 633 | s += 2; |
| 634 | } |
| 635 | |
| 636 | /* Add a space if this isn't a long-branch, because for those will add |
| 637 | the condition part of the name later. */ |
| 638 | if (opcodep->match != (BRANCH_PC_LOW + BRANCH_INCR_HIGH * 256)) |
| 639 | *tp++ = ' '; |
| 640 | |
| 641 | /* Fill in the insn-type if deducible from the name (and there's no |
| 642 | better way). */ |
| 643 | if (opcodep->name[0] == 'j') |
| 644 | { |
| 645 | if (strncmp (opcodep->name, "jsr", 3) == 0) |
| 646 | /* It's "jsr" or "jsrc". */ |
| 647 | info->insn_type = dis_jsr; |
| 648 | else |
| 649 | /* Any other jump-type insn is considered a branch. */ |
| 650 | info->insn_type = dis_branch; |
| 651 | } |
| 652 | |
| 653 | /* We might know some more fields right now. */ |
| 654 | info->branch_delay_insns = opcodep->delayed; |
| 655 | |
| 656 | /* Handle operands. */ |
| 657 | for (; *s; s++) |
| 658 | { |
| 659 | switch (*s) |
| 660 | { |
| 661 | case ',': |
| 662 | *tp++ = *s; |
| 663 | break; |
| 664 | |
| 665 | case '!': |
| 666 | /* Ignore at this point; used at earlier stages to avoid recognition |
| 667 | if there's a prefixes at something that in other ways looks like |
| 668 | a "pop". */ |
| 669 | break; |
| 670 | |
| 671 | case 'B': |
| 672 | /* This was the prefix that made this a "push". We've already |
| 673 | handled it by recognizing it, so signal that the prefix is |
| 674 | handled by setting it to NULL. */ |
| 675 | prefix_opcodep = NULL; |
| 676 | break; |
| 677 | |
| 678 | case 'D': |
| 679 | case 'r': |
| 680 | tp = format_reg (insn & 15, tp, with_reg_prefix); |
| 681 | break; |
| 682 | |
| 683 | case 'R': |
| 684 | tp = format_reg ((insn >> 12) & 15, tp, with_reg_prefix); |
| 685 | break; |
| 686 | |
| 687 | case 'y': |
| 688 | case 'S': |
| 689 | case 's': |
| 690 | /* Any "normal" memory operand. */ |
| 691 | if ((insn & 0x400) && (insn & 15) == 15) |
| 692 | { |
| 693 | /* We're looking at [pc+], i.e. we need to output an immediate |
| 694 | number, where the size can depend on different things. */ |
| 695 | long number; |
| 696 | int signedp |
| 697 | = ((*cs == 'z' && (insn & 0x20)) |
| 698 | || opcodep->match == BDAP_QUICK_OPCODE); |
| 699 | int nbytes; |
| 700 | |
| 701 | if (opcodep->imm_oprnd_size == SIZE_FIX_32) |
| 702 | nbytes = 4; |
| 703 | else if (opcodep->imm_oprnd_size == SIZE_SPEC_REG) |
| 704 | { |
| 705 | const struct cris_spec_reg *sregp |
| 706 | = spec_reg_info ((insn >> 12) & 15); |
| 707 | |
| 708 | /* A NULL return should have been as a non-match earlier, |
| 709 | so catch it as an internal error in the error-case |
| 710 | below. */ |
| 711 | if (sregp == NULL) |
| 712 | /* Whatever non-valid size. */ |
| 713 | nbytes = 42; |
| 714 | else |
| 715 | /* PC is always incremented by a multiple of two. */ |
| 716 | nbytes = (sregp->reg_size + 1) & ~1; |
| 717 | } |
| 718 | else |
| 719 | { |
| 720 | int mode_size = 1 << ((insn >> 4) & (*cs == 'z' ? 1 : 3)); |
| 721 | |
| 722 | if (mode_size == 1) |
| 723 | nbytes = 2; |
| 724 | else |
| 725 | nbytes = mode_size; |
| 726 | } |
| 727 | |
| 728 | switch (nbytes) |
| 729 | { |
| 730 | case 1: |
| 731 | number = buffer[2]; |
| 732 | if (signedp && number > 127) |
| 733 | number -= 256; |
| 734 | break; |
| 735 | |
| 736 | case 2: |
| 737 | number = buffer[2] + buffer[3] * 256; |
| 738 | if (signedp && number > 32767) |
| 739 | number -= 65536; |
| 740 | break; |
| 741 | |
| 742 | case 4: |
| 743 | number |
| 744 | = buffer[2] + buffer[3] * 256 + buffer[4] * 65536 |
| 745 | + buffer[5] * 0x1000000; |
| 746 | break; |
| 747 | |
| 748 | default: |
| 749 | strcpy (tp, "bug"); |
| 750 | tp += 3; |
| 751 | number = 42; |
| 752 | } |
| 753 | |
| 754 | if ((*cs == 'z' && (insn & 0x20)) |
| 755 | || (opcodep->match == BDAP_QUICK_OPCODE |
| 756 | && (nbytes <= 2 || buffer[1 + nbytes] == 0))) |
| 757 | tp = format_dec (number, tp, signedp); |
| 758 | else |
| 759 | { |
| 760 | unsigned int highbyte = (number >> 24) & 0xff; |
| 761 | |
| 762 | /* Either output this as an address or as a number. If it's |
| 763 | a dword with the same high-byte as the address of the |
| 764 | insn, assume it's an address, and also if it's a non-zero |
| 765 | non-0xff high-byte. If this is a jsr or a jump, then |
| 766 | it's definitely an address. */ |
| 767 | if (nbytes == 4 |
| 768 | && (highbyte == ((addr >> 24) & 0xff) |
| 769 | || (highbyte != 0 && highbyte != 0xff) |
| 770 | || info->insn_type == dis_branch |
| 771 | || info->insn_type == dis_jsr)) |
| 772 | { |
| 773 | /* Finish off and output previous formatted bytes. */ |
| 774 | *tp = 0; |
| 775 | tp = temp; |
| 776 | if (temp[0]) |
| 777 | (*info->fprintf_func) (info->stream, "%s", temp); |
| 778 | |
| 779 | (*info->print_address_func) ((bfd_vma) number, info); |
| 780 | |
| 781 | info->target = number; |
| 782 | } |
| 783 | else |
| 784 | tp = format_hex (number, tp); |
| 785 | } |
| 786 | } |
| 787 | else |
| 788 | { |
| 789 | /* Not an immediate number. Then this is a (possibly |
| 790 | prefixed) memory operand. */ |
| 791 | if (info->insn_type != dis_nonbranch) |
| 792 | { |
| 793 | int mode_size |
| 794 | = 1 << ((insn >> 4) |
| 795 | & (opcodep->args[0] == 'z' ? 1 : 3)); |
| 796 | int size; |
| 797 | info->insn_type = dis_dref; |
| 798 | info->flags |= CRIS_DIS_FLAG_MEMREF; |
| 799 | |
| 800 | if (opcodep->imm_oprnd_size == SIZE_FIX_32) |
| 801 | size = 4; |
| 802 | else if (opcodep->imm_oprnd_size == SIZE_SPEC_REG) |
| 803 | { |
| 804 | const struct cris_spec_reg *sregp |
| 805 | = spec_reg_info ((insn >> 12) & 15); |
| 806 | |
| 807 | /* FIXME: Improve error handling; should have been caught |
| 808 | earlier. */ |
| 809 | if (sregp == NULL) |
| 810 | size = 4; |
| 811 | else |
| 812 | size = sregp->reg_size; |
| 813 | } |
| 814 | else |
| 815 | size = mode_size; |
| 816 | |
| 817 | info->data_size = size; |
| 818 | } |
| 819 | |
| 820 | *tp++ = '['; |
| 821 | |
| 822 | if (prefix_opcodep |
| 823 | /* We don't match dip with a postincremented field |
| 824 | as a side-effect address mode. */ |
| 825 | && ((insn & 0x400) == 0 |
| 826 | || prefix_opcodep->match != DIP_OPCODE)) |
| 827 | { |
| 828 | if (insn & 0x400) |
| 829 | { |
| 830 | tp = format_reg (insn & 15, tp, with_reg_prefix); |
| 831 | *tp++ = '='; |
| 832 | } |
| 833 | |
| 834 | |
| 835 | /* We mainly ignore the prefix format string when the |
| 836 | address-mode syntax is output. */ |
| 837 | switch (prefix_opcodep->match) |
| 838 | { |
| 839 | case DIP_OPCODE: |
| 840 | /* It's [r], [r+] or [pc+]. */ |
| 841 | if ((prefix_insn & 0x400) && (prefix_insn & 15) == 15) |
| 842 | { |
| 843 | /* It's [pc+]. This cannot possibly be anything |
| 844 | but an address. */ |
| 845 | unsigned long number |
| 846 | = prefix_buffer[2] + prefix_buffer[3] * 256 |
| 847 | + prefix_buffer[4] * 65536 |
| 848 | + prefix_buffer[5] * 0x1000000; |
| 849 | |
| 850 | info->target = (bfd_vma) number; |
| 851 | |
| 852 | /* Finish off and output previous formatted |
| 853 | data. */ |
| 854 | *tp = 0; |
| 855 | tp = temp; |
| 856 | if (temp[0]) |
| 857 | (*info->fprintf_func) (info->stream, "%s", temp); |
| 858 | |
| 859 | (*info->print_address_func) ((bfd_vma) number, info); |
| 860 | } |
| 861 | else |
| 862 | { |
| 863 | /* For a memref in an address, we use target2. |
| 864 | In this case, target is zero. */ |
| 865 | info->flags |
| 866 | |= (CRIS_DIS_FLAG_MEM_TARGET2_IS_REG |
| 867 | | CRIS_DIS_FLAG_MEM_TARGET2_MEM); |
| 868 | |
| 869 | info->target2 = prefix_insn & 15; |
| 870 | |
| 871 | *tp++ = '['; |
| 872 | tp = format_reg (prefix_insn & 15, tp, |
| 873 | with_reg_prefix); |
| 874 | if (prefix_insn & 0x400) |
| 875 | *tp++ = '+'; |
| 876 | *tp++ = ']'; |
| 877 | } |
| 878 | break; |
| 879 | |
| 880 | case BDAP_QUICK_OPCODE: |
| 881 | { |
| 882 | int number; |
| 883 | |
| 884 | number = prefix_buffer[0]; |
| 885 | if (number > 127) |
| 886 | number -= 256; |
| 887 | |
| 888 | /* Output "reg+num" or, if num < 0, "reg-num". */ |
| 889 | tp = format_reg ((prefix_insn >> 12) & 15, tp, |
| 890 | with_reg_prefix); |
| 891 | if (number >= 0) |
| 892 | *tp++ = '+'; |
| 893 | tp = format_dec (number, tp, 1); |
| 894 | |
| 895 | info->flags |= CRIS_DIS_FLAG_MEM_TARGET_IS_REG; |
| 896 | info->target = (prefix_insn >> 12) & 15; |
| 897 | info->target2 = (bfd_vma) number; |
| 898 | break; |
| 899 | } |
| 900 | |
| 901 | case BIAP_OPCODE: |
| 902 | /* Output "r+R.m". */ |
| 903 | tp = format_reg (prefix_insn & 15, tp, with_reg_prefix); |
| 904 | *tp++ = '+'; |
| 905 | tp = format_reg ((prefix_insn >> 12) & 15, tp, |
| 906 | with_reg_prefix); |
| 907 | *tp++ = '.'; |
| 908 | *tp++ = mode_char[(prefix_insn >> 4) & 3]; |
| 909 | |
| 910 | info->flags |
| 911 | |= (CRIS_DIS_FLAG_MEM_TARGET2_IS_REG |
| 912 | | CRIS_DIS_FLAG_MEM_TARGET_IS_REG |
| 913 | |
| 914 | | ((prefix_insn & 0x8000) |
| 915 | ? CRIS_DIS_FLAG_MEM_TARGET2_MULT4 |
| 916 | : ((prefix_insn & 0x8000) |
| 917 | ? CRIS_DIS_FLAG_MEM_TARGET2_MULT2 : 0))); |
| 918 | |
| 919 | /* Is it the casejump? It's a "adds.w [pc+r%d.w],pc". */ |
| 920 | if (insn == 0xf83f && (prefix_insn & ~0xf000) == 0x55f) |
| 921 | /* Then start interpreting data as offsets. */ |
| 922 | case_offset_counter = no_of_case_offsets; |
| 923 | break; |
| 924 | |
| 925 | case BDAP_INDIR_OPCODE: |
| 926 | /* Output "r+s.m", or, if "s" is [pc+], "r+s" or |
| 927 | "r-s". */ |
| 928 | tp = format_reg ((prefix_insn >> 12) & 15, tp, |
| 929 | with_reg_prefix); |
| 930 | |
| 931 | if ((prefix_insn & 0x400) && (prefix_insn & 15) == 15) |
| 932 | { |
| 933 | long number; |
| 934 | unsigned int nbytes; |
| 935 | |
| 936 | /* It's a value. Get its size. */ |
| 937 | int mode_size = 1 << ((prefix_insn >> 4) & 3); |
| 938 | |
| 939 | if (mode_size == 1) |
| 940 | nbytes = 2; |
| 941 | else |
| 942 | nbytes = mode_size; |
| 943 | |
| 944 | switch (nbytes) |
| 945 | { |
| 946 | case 1: |
| 947 | number = prefix_buffer[2]; |
| 948 | if (number > 127) |
| 949 | number -= 256; |
| 950 | break; |
| 951 | |
| 952 | case 2: |
| 953 | number = prefix_buffer[2] + prefix_buffer[3] * 256; |
| 954 | if (number > 32767) |
| 955 | number -= 65536; |
| 956 | break; |
| 957 | |
| 958 | case 4: |
| 959 | number |
| 960 | = prefix_buffer[2] + prefix_buffer[3] * 256 |
| 961 | + prefix_buffer[4] * 65536 |
| 962 | + prefix_buffer[5] * 0x1000000; |
| 963 | break; |
| 964 | |
| 965 | default: |
| 966 | strcpy (tp, "bug"); |
| 967 | tp += 3; |
| 968 | number = 42; |
| 969 | } |
| 970 | |
| 971 | info->flags |= CRIS_DIS_FLAG_MEM_TARGET_IS_REG; |
| 972 | info->target2 = (bfd_vma) number; |
| 973 | |
| 974 | /* If the size is dword, then assume it's an |
| 975 | address. */ |
| 976 | if (nbytes == 4) |
| 977 | { |
| 978 | /* Finish off and output previous formatted |
| 979 | bytes. */ |
| 980 | *tp++ = '+'; |
| 981 | *tp = 0; |
| 982 | tp = temp; |
| 983 | (*info->fprintf_func) (info->stream, "%s", temp); |
| 984 | |
| 985 | (*info->print_address_func) ((bfd_vma) number, info); |
| 986 | } |
| 987 | else |
| 988 | { |
| 989 | if (number >= 0) |
| 990 | *tp++ = '+'; |
| 991 | tp = format_dec (number, tp, 1); |
| 992 | } |
| 993 | } |
| 994 | else |
| 995 | { |
| 996 | /* Output "r+[R].m" or "r+[R+].m". */ |
| 997 | *tp++ = '+'; |
| 998 | *tp++ = '['; |
| 999 | tp = format_reg (prefix_insn & 15, tp, |
| 1000 | with_reg_prefix); |
| 1001 | if (prefix_insn & 0x400) |
| 1002 | *tp++ = '+'; |
| 1003 | *tp++ = ']'; |
| 1004 | *tp++ = '.'; |
| 1005 | *tp++ = mode_char[(prefix_insn >> 4) & 3]; |
| 1006 | |
| 1007 | info->flags |
| 1008 | |= (CRIS_DIS_FLAG_MEM_TARGET2_IS_REG |
| 1009 | | CRIS_DIS_FLAG_MEM_TARGET2_MEM |
| 1010 | | CRIS_DIS_FLAG_MEM_TARGET_IS_REG |
| 1011 | |
| 1012 | | (((prefix_insn >> 4) == 2) |
| 1013 | ? 0 |
| 1014 | : (((prefix_insn >> 4) & 3) == 1 |
| 1015 | ? CRIS_DIS_FLAG_MEM_TARGET2_MEM_WORD |
| 1016 | : CRIS_DIS_FLAG_MEM_TARGET2_MEM_BYTE))); |
| 1017 | } |
| 1018 | break; |
| 1019 | |
| 1020 | default: |
| 1021 | (*info->fprintf_func) (info->stream, "?prefix-bug"); |
| 1022 | } |
| 1023 | |
| 1024 | /* To mark that the prefix is used, reset it. */ |
| 1025 | prefix_opcodep = NULL; |
| 1026 | } |
| 1027 | else |
| 1028 | { |
| 1029 | tp = format_reg (insn & 15, tp, with_reg_prefix); |
| 1030 | |
| 1031 | info->flags |= CRIS_DIS_FLAG_MEM_TARGET_IS_REG; |
| 1032 | info->target = insn & 15; |
| 1033 | |
| 1034 | if (insn & 0x400) |
| 1035 | *tp++ = '+'; |
| 1036 | } |
| 1037 | *tp++ = ']'; |
| 1038 | } |
| 1039 | break; |
| 1040 | |
| 1041 | case 'x': |
| 1042 | tp = format_reg ((insn >> 12) & 15, tp, with_reg_prefix); |
| 1043 | *tp++ = '.'; |
| 1044 | *tp++ = mode_char[(insn >> 4) & 3]; |
| 1045 | break; |
| 1046 | |
| 1047 | case 'I': |
| 1048 | tp = format_dec (insn & 63, tp, 0); |
| 1049 | break; |
| 1050 | |
| 1051 | case 'b': |
| 1052 | { |
| 1053 | int where = buffer[2] + buffer[3] * 256; |
| 1054 | |
| 1055 | if (where > 32767) |
| 1056 | where -= 65536; |
| 1057 | |
| 1058 | where += addr + 4; |
| 1059 | |
| 1060 | if (insn == BA_PC_INCR_OPCODE) |
| 1061 | info->insn_type = dis_branch; |
| 1062 | else |
| 1063 | info->insn_type = dis_condbranch; |
| 1064 | |
| 1065 | info->target = (bfd_vma) where; |
| 1066 | |
| 1067 | *tp = 0; |
| 1068 | tp = temp; |
| 1069 | (*info->fprintf_func) (info->stream, "%s%s ", |
| 1070 | temp, cris_cc_strings[insn >> 12]); |
| 1071 | |
| 1072 | (*info->print_address_func) ((bfd_vma) where, info); |
| 1073 | } |
| 1074 | break; |
| 1075 | |
| 1076 | case 'c': |
| 1077 | tp = format_dec (insn & 31, tp, 0); |
| 1078 | break; |
| 1079 | |
| 1080 | case 'C': |
| 1081 | tp = format_dec (insn & 15, tp, 0); |
| 1082 | break; |
| 1083 | |
| 1084 | case 'o': |
| 1085 | { |
| 1086 | long offset = insn & 0xfe; |
| 1087 | |
| 1088 | if (insn & 1) |
| 1089 | offset |= ~0xff; |
| 1090 | |
| 1091 | if (opcodep->match == BA_QUICK_OPCODE) |
| 1092 | info->insn_type = dis_branch; |
| 1093 | else |
| 1094 | info->insn_type = dis_condbranch; |
| 1095 | |
| 1096 | info->target = (bfd_vma) (addr + 2 + offset); |
| 1097 | *tp = 0; |
| 1098 | tp = temp; |
| 1099 | (*info->fprintf_func) (info->stream, "%s", temp); |
| 1100 | |
| 1101 | (*info->print_address_func) ((bfd_vma) (addr + 2 + offset), info); |
| 1102 | } |
| 1103 | break; |
| 1104 | |
| 1105 | case 'O': |
| 1106 | { |
| 1107 | long number = buffer[0]; |
| 1108 | |
| 1109 | if (number > 127) |
| 1110 | number = number - 256; |
| 1111 | |
| 1112 | tp = format_dec (number, tp, 1); |
| 1113 | *tp++ = ','; |
| 1114 | tp = format_reg ((insn >> 12) & 15, tp, with_reg_prefix); |
| 1115 | } |
| 1116 | break; |
| 1117 | |
| 1118 | case 'f': |
| 1119 | tp = print_flags (insn, tp); |
| 1120 | break; |
| 1121 | |
| 1122 | case 'i': |
| 1123 | tp = format_dec ((insn & 32) ? (insn & 31) | ~31 : insn & 31, tp, 1); |
| 1124 | break; |
| 1125 | |
| 1126 | case 'P': |
| 1127 | { |
| 1128 | const struct cris_spec_reg *sregp |
| 1129 | = spec_reg_info ((insn >> 12) & 15); |
| 1130 | |
| 1131 | if (sregp->name == NULL) |
| 1132 | /* Should have been caught as a non-match eariler. */ |
| 1133 | *tp++ = '?'; |
| 1134 | else |
| 1135 | { |
| 1136 | if (with_reg_prefix) |
| 1137 | *tp++ = REGISTER_PREFIX_CHAR; |
| 1138 | strcpy (tp, sregp->name); |
| 1139 | tp += strlen (tp); |
| 1140 | } |
| 1141 | } |
| 1142 | break; |
| 1143 | |
| 1144 | default: |
| 1145 | strcpy (tp, "???"); |
| 1146 | tp += 3; |
| 1147 | } |
| 1148 | } |
| 1149 | |
| 1150 | *tp = 0; |
| 1151 | |
| 1152 | if (prefix_opcodep) |
| 1153 | (*info->fprintf_func) (info->stream, " (OOPS unused prefix \"%s: %s\")", |
| 1154 | prefix_opcodep->name, prefix_opcodep->args); |
| 1155 | |
| 1156 | (*info->fprintf_func) (info->stream, "%s", temp); |
| 1157 | |
| 1158 | /* Get info for matching case-tables, if we don't have any active. |
| 1159 | We assume that the last constant seen is used; either in the insn |
| 1160 | itself or in a "move.d const,rN, sub.d rN,rM"-like sequence. */ |
| 1161 | if (TRACE_CASE && case_offset_counter == 0) |
| 1162 | { |
| 1163 | if (strncmp (opcodep->name, "sub", 3) == 0) |
| 1164 | case_offset = last_immediate; |
| 1165 | |
| 1166 | /* It could also be an "add", if there are negative case-values. */ |
| 1167 | else if (strncmp (opcodep->name, "add", 3) == 0) |
| 1168 | { |
| 1169 | /* The first case is the negated operand to the add. */ |
| 1170 | case_offset = -last_immediate; |
| 1171 | } |
| 1172 | /* A bound insn will tell us the number of cases. */ |
| 1173 | else if (strncmp (opcodep->name, "bound", 5) == 0) |
| 1174 | { |
| 1175 | no_of_case_offsets = last_immediate + 1; |
| 1176 | } |
| 1177 | /* A jump or jsr or branch breaks the chain of insns for a |
| 1178 | case-table, so assume default first-case again. */ |
| 1179 | else if (info->insn_type == dis_jsr |
| 1180 | || info->insn_type == dis_branch |
| 1181 | || info->insn_type == dis_condbranch) |
| 1182 | case_offset = 0; |
| 1183 | } |
| 1184 | } |
| 1185 | |
| 1186 | |
| 1187 | /* Print the CRIS instruction at address memaddr on stream. Returns |
| 1188 | length of the instruction, in bytes. Prefix register names with `$' if |
| 1189 | WITH_REG_PREFIX. */ |
| 1190 | |
| 1191 | static int |
| 1192 | print_insn_cris_generic (memaddr, info, with_reg_prefix) |
| 1193 | bfd_vma memaddr; |
| 1194 | disassemble_info *info; |
| 1195 | bfd_boolean with_reg_prefix; |
| 1196 | { |
| 1197 | int nbytes; |
| 1198 | unsigned int insn; |
| 1199 | const struct cris_opcode *matchedp; |
| 1200 | int advance = 0; |
| 1201 | |
| 1202 | /* No instruction will be disassembled as longer than this number of |
| 1203 | bytes; stacked prefixes will not be expanded. */ |
| 1204 | unsigned char buffer[MAX_BYTES_PER_CRIS_INSN]; |
| 1205 | unsigned char *bufp; |
| 1206 | int status = 0; |
| 1207 | bfd_vma addr; |
| 1208 | |
| 1209 | /* There will be an "out of range" error after the last instruction. |
| 1210 | Reading pairs of bytes in decreasing number, we hope that we will get |
| 1211 | at least the amount that we will consume. |
| 1212 | |
| 1213 | If we can't get any data, or we do not get enough data, we print |
| 1214 | the error message. */ |
| 1215 | |
| 1216 | for (nbytes = MAX_BYTES_PER_CRIS_INSN; nbytes > 0; nbytes -= 2) |
| 1217 | { |
| 1218 | status = (*info->read_memory_func) (memaddr, buffer, nbytes, info); |
| 1219 | if (status == 0) |
| 1220 | break; |
| 1221 | } |
| 1222 | |
| 1223 | /* If we did not get all we asked for, then clear the rest. |
| 1224 | Hopefully this makes a reproducible result in case of errors. */ |
| 1225 | if (nbytes != MAX_BYTES_PER_CRIS_INSN) |
| 1226 | memset (buffer + nbytes, 0, MAX_BYTES_PER_CRIS_INSN - nbytes); |
| 1227 | |
| 1228 | addr = memaddr; |
| 1229 | bufp = buffer; |
| 1230 | |
| 1231 | /* Set some defaults for the insn info. */ |
| 1232 | info->insn_info_valid = 1; |
| 1233 | info->branch_delay_insns = 0; |
| 1234 | info->data_size = 0; |
| 1235 | info->insn_type = dis_nonbranch; |
| 1236 | info->flags = 0; |
| 1237 | info->target = 0; |
| 1238 | info->target2 = 0; |
| 1239 | |
| 1240 | /* If we got any data, disassemble it. */ |
| 1241 | if (nbytes != 0) |
| 1242 | { |
| 1243 | matchedp = NULL; |
| 1244 | |
| 1245 | insn = bufp[0] + bufp[1] * 256; |
| 1246 | |
| 1247 | /* If we're in a case-table, don't disassemble the offsets. */ |
| 1248 | if (TRACE_CASE && case_offset_counter != 0) |
| 1249 | { |
| 1250 | info->insn_type = dis_noninsn; |
| 1251 | advance += 2; |
| 1252 | |
| 1253 | /* If to print data as offsets, then shortcut here. */ |
| 1254 | (*info->fprintf_func) (info->stream, "case %d%s: -> ", |
| 1255 | case_offset + no_of_case_offsets |
| 1256 | - case_offset_counter, |
| 1257 | case_offset_counter == 1 ? "/default" : |
| 1258 | ""); |
| 1259 | |
| 1260 | (*info->print_address_func) ((bfd_vma) |
| 1261 | ((short) (insn) |
| 1262 | + (long) (addr |
| 1263 | - (no_of_case_offsets |
| 1264 | - case_offset_counter) |
| 1265 | * 2)), info); |
| 1266 | case_offset_counter--; |
| 1267 | |
| 1268 | /* The default case start (without a "sub" or "add") must be |
| 1269 | zero. */ |
| 1270 | if (case_offset_counter == 0) |
| 1271 | case_offset = 0; |
| 1272 | } |
| 1273 | else if (insn == 0) |
| 1274 | { |
| 1275 | /* We're often called to disassemble zeroes. While this is a |
| 1276 | valid "bcc .+2" insn, it is also useless enough and enough |
| 1277 | of a nuiscance that we will just output "bcc .+2" for it |
| 1278 | and signal it as a noninsn. */ |
| 1279 | (*info->fprintf_func) (info->stream, "bcc .+2"); |
| 1280 | info->insn_type = dis_noninsn; |
| 1281 | advance += 2; |
| 1282 | } |
| 1283 | else |
| 1284 | { |
| 1285 | const struct cris_opcode *prefix_opcodep = NULL; |
| 1286 | unsigned char *prefix_buffer = bufp; |
| 1287 | unsigned int prefix_insn = insn; |
| 1288 | int prefix_size = 0; |
| 1289 | |
| 1290 | matchedp = get_opcode_entry (insn, NO_CRIS_PREFIX); |
| 1291 | |
| 1292 | /* Check if we're supposed to write out prefixes as address |
| 1293 | modes and if this was a prefix. */ |
| 1294 | if (matchedp != NULL && PARSE_PREFIX && matchedp->args[0] == 'p') |
| 1295 | { |
| 1296 | /* If it's a prefix, put it into the prefix vars and get the |
| 1297 | main insn. */ |
| 1298 | prefix_size = bytes_to_skip (prefix_insn, matchedp); |
| 1299 | prefix_opcodep = matchedp; |
| 1300 | |
| 1301 | insn = bufp[prefix_size] + bufp[prefix_size + 1] * 256; |
| 1302 | matchedp = get_opcode_entry (insn, prefix_insn); |
| 1303 | |
| 1304 | if (matchedp != NULL) |
| 1305 | { |
| 1306 | addr += prefix_size; |
| 1307 | bufp += prefix_size; |
| 1308 | advance += prefix_size; |
| 1309 | } |
| 1310 | else |
| 1311 | { |
| 1312 | /* The "main" insn wasn't valid, at least not when |
| 1313 | prefixed. Put back things enough to output the |
| 1314 | prefix insn only, as a normal insn. */ |
| 1315 | matchedp = prefix_opcodep; |
| 1316 | insn = prefix_insn; |
| 1317 | prefix_opcodep = NULL; |
| 1318 | } |
| 1319 | } |
| 1320 | |
| 1321 | if (matchedp == NULL) |
| 1322 | { |
| 1323 | (*info->fprintf_func) (info->stream, "??0x%lx", insn); |
| 1324 | advance += 2; |
| 1325 | |
| 1326 | info->insn_type = dis_noninsn; |
| 1327 | } |
| 1328 | else |
| 1329 | { |
| 1330 | advance += bytes_to_skip (insn, matchedp); |
| 1331 | |
| 1332 | /* The info_type and assorted fields will be set according |
| 1333 | to the operands. */ |
| 1334 | print_with_operands (matchedp, insn, bufp, addr, info, |
| 1335 | prefix_opcodep, prefix_insn, |
| 1336 | prefix_buffer, with_reg_prefix); |
| 1337 | } |
| 1338 | } |
| 1339 | } |
| 1340 | else |
| 1341 | info->insn_type = dis_noninsn; |
| 1342 | |
| 1343 | /* If we read less than MAX_BYTES_PER_CRIS_INSN, i.e. we got an error |
| 1344 | status when reading that much, and the insn decoding indicated a |
| 1345 | length exceeding what we read, there is an error. */ |
| 1346 | if (status != 0 && (nbytes == 0 || advance > nbytes)) |
| 1347 | { |
| 1348 | (*info->memory_error_func) (status, memaddr, info); |
| 1349 | return -1; |
| 1350 | } |
| 1351 | |
| 1352 | /* Max supported insn size with one folded prefix insn. */ |
| 1353 | info->bytes_per_line = MAX_BYTES_PER_CRIS_INSN; |
| 1354 | |
| 1355 | /* I would like to set this to a fixed value larger than the actual |
| 1356 | number of bytes to print in order to avoid spaces between bytes, |
| 1357 | but objdump.c (2.9.1) does not like that, so we print 16-bit |
| 1358 | chunks, which is the next choice. */ |
| 1359 | info->bytes_per_chunk = 2; |
| 1360 | |
| 1361 | /* Printing bytes in order of increasing addresses makes sense, |
| 1362 | especially on a little-endian target. |
| 1363 | This is completely the opposite of what you think; setting this to |
| 1364 | BFD_ENDIAN_LITTLE will print bytes in order N..0 rather than the 0..N |
| 1365 | we want. */ |
| 1366 | info->display_endian = BFD_ENDIAN_BIG; |
| 1367 | |
| 1368 | return advance; |
| 1369 | } |
| 1370 | |
| 1371 | /* Disassemble, prefixing register names with `$'. */ |
| 1372 | |
| 1373 | static int |
| 1374 | print_insn_cris_with_register_prefix (vma, info) |
| 1375 | bfd_vma vma; |
| 1376 | disassemble_info *info; |
| 1377 | { |
| 1378 | return print_insn_cris_generic (vma, info, TRUE); |
| 1379 | } |
| 1380 | |
| 1381 | /* Disassemble, no prefixes on register names. */ |
| 1382 | |
| 1383 | static int |
| 1384 | print_insn_cris_without_register_prefix (vma, info) |
| 1385 | bfd_vma vma; |
| 1386 | disassemble_info *info; |
| 1387 | { |
| 1388 | return print_insn_cris_generic (vma, info, FALSE); |
| 1389 | } |
| 1390 | |
| 1391 | /* Return a disassembler-function that prints registers with a `$' prefix, |
| 1392 | or one that prints registers without a prefix. */ |
| 1393 | |
| 1394 | disassembler_ftype |
| 1395 | cris_get_disassembler (abfd) |
| 1396 | bfd *abfd; |
| 1397 | { |
| 1398 | /* If there's no bfd in sight, we return what is valid as input in all |
| 1399 | contexts if fed back to the assembler: disassembly *with* register |
| 1400 | prefix. */ |
| 1401 | if (abfd == NULL || bfd_get_symbol_leading_char (abfd) == 0) |
| 1402 | return print_insn_cris_with_register_prefix; |
| 1403 | |
| 1404 | return print_insn_cris_without_register_prefix; |
| 1405 | } |
| 1406 | |
| 1407 | /* |
| 1408 | * Local variables: |
| 1409 | * eval: (c-set-style "gnu") |
| 1410 | * indent-tabs-mode: t |
| 1411 | * End: |
| 1412 | */ |