| 1 | /* Print mips instructions for GDB, the GNU debugger, or for objdump. |
| 2 | Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, |
| 3 | 2000, 2001, 2002, 2003, 2005, 2006, 2007, 2008, 2009, 2012 |
| 4 | Free Software Foundation, Inc. |
| 5 | Contributed by Nobuyuki Hikichi(hikichi@sra.co.jp). |
| 6 | |
| 7 | This file is part of the GNU opcodes library. |
| 8 | |
| 9 | This library is free software; you can redistribute it and/or modify |
| 10 | it under the terms of the GNU General Public License as published by |
| 11 | the Free Software Foundation; either version 3, or (at your option) |
| 12 | any later version. |
| 13 | |
| 14 | It is distributed in the hope that it will be useful, but WITHOUT |
| 15 | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| 16 | or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public |
| 17 | License for more details. |
| 18 | |
| 19 | You should have received a copy of the GNU General Public License |
| 20 | along with this program; if not, write to the Free Software |
| 21 | Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, |
| 22 | MA 02110-1301, USA. */ |
| 23 | |
| 24 | #include "sysdep.h" |
| 25 | #include "dis-asm.h" |
| 26 | #include "libiberty.h" |
| 27 | #include "opcode/mips.h" |
| 28 | #include "opintl.h" |
| 29 | |
| 30 | /* FIXME: These are needed to figure out if the code is mips16 or |
| 31 | not. The low bit of the address is often a good indicator. No |
| 32 | symbol table is available when this code runs out in an embedded |
| 33 | system as when it is used for disassembler support in a monitor. */ |
| 34 | |
| 35 | #if !defined(EMBEDDED_ENV) |
| 36 | #define SYMTAB_AVAILABLE 1 |
| 37 | #include "elf-bfd.h" |
| 38 | #include "elf/mips.h" |
| 39 | #endif |
| 40 | |
| 41 | /* Mips instructions are at maximum this many bytes long. */ |
| 42 | #define INSNLEN 4 |
| 43 | |
| 44 | \f |
| 45 | /* FIXME: These should be shared with gdb somehow. */ |
| 46 | |
| 47 | struct mips_cp0sel_name |
| 48 | { |
| 49 | unsigned int cp0reg; |
| 50 | unsigned int sel; |
| 51 | const char * const name; |
| 52 | }; |
| 53 | |
| 54 | static const char * const mips_gpr_names_numeric[32] = |
| 55 | { |
| 56 | "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", |
| 57 | "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| 58 | "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", |
| 59 | "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" |
| 60 | }; |
| 61 | |
| 62 | static const char * const mips_gpr_names_oldabi[32] = |
| 63 | { |
| 64 | "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", |
| 65 | "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", |
| 66 | "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", |
| 67 | "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra" |
| 68 | }; |
| 69 | |
| 70 | static const char * const mips_gpr_names_newabi[32] = |
| 71 | { |
| 72 | "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", |
| 73 | "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3", |
| 74 | "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", |
| 75 | "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra" |
| 76 | }; |
| 77 | |
| 78 | static const char * const mips_fpr_names_numeric[32] = |
| 79 | { |
| 80 | "$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7", |
| 81 | "$f8", "$f9", "$f10", "$f11", "$f12", "$f13", "$f14", "$f15", |
| 82 | "$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23", |
| 83 | "$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "$f31" |
| 84 | }; |
| 85 | |
| 86 | static const char * const mips_fpr_names_32[32] = |
| 87 | { |
| 88 | "fv0", "fv0f", "fv1", "fv1f", "ft0", "ft0f", "ft1", "ft1f", |
| 89 | "ft2", "ft2f", "ft3", "ft3f", "fa0", "fa0f", "fa1", "fa1f", |
| 90 | "ft4", "ft4f", "ft5", "ft5f", "fs0", "fs0f", "fs1", "fs1f", |
| 91 | "fs2", "fs2f", "fs3", "fs3f", "fs4", "fs4f", "fs5", "fs5f" |
| 92 | }; |
| 93 | |
| 94 | static const char * const mips_fpr_names_n32[32] = |
| 95 | { |
| 96 | "fv0", "ft14", "fv1", "ft15", "ft0", "ft1", "ft2", "ft3", |
| 97 | "ft4", "ft5", "ft6", "ft7", "fa0", "fa1", "fa2", "fa3", |
| 98 | "fa4", "fa5", "fa6", "fa7", "fs0", "ft8", "fs1", "ft9", |
| 99 | "fs2", "ft10", "fs3", "ft11", "fs4", "ft12", "fs5", "ft13" |
| 100 | }; |
| 101 | |
| 102 | static const char * const mips_fpr_names_64[32] = |
| 103 | { |
| 104 | "fv0", "ft12", "fv1", "ft13", "ft0", "ft1", "ft2", "ft3", |
| 105 | "ft4", "ft5", "ft6", "ft7", "fa0", "fa1", "fa2", "fa3", |
| 106 | "fa4", "fa5", "fa6", "fa7", "ft8", "ft9", "ft10", "ft11", |
| 107 | "fs0", "fs1", "fs2", "fs3", "fs4", "fs5", "fs6", "fs7" |
| 108 | }; |
| 109 | |
| 110 | static const char * const mips_cp0_names_numeric[32] = |
| 111 | { |
| 112 | "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", |
| 113 | "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| 114 | "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", |
| 115 | "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" |
| 116 | }; |
| 117 | |
| 118 | static const char * const mips_cp1_names_numeric[32] = |
| 119 | { |
| 120 | "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", |
| 121 | "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| 122 | "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", |
| 123 | "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" |
| 124 | }; |
| 125 | |
| 126 | static const char * const mips_cp0_names_r3000[32] = |
| 127 | { |
| 128 | "c0_index", "c0_random", "c0_entrylo", "$3", |
| 129 | "c0_context", "$5", "$6", "$7", |
| 130 | "c0_badvaddr", "$9", "c0_entryhi", "$11", |
| 131 | "c0_sr", "c0_cause", "c0_epc", "c0_prid", |
| 132 | "$16", "$17", "$18", "$19", |
| 133 | "$20", "$21", "$22", "$23", |
| 134 | "$24", "$25", "$26", "$27", |
| 135 | "$28", "$29", "$30", "$31", |
| 136 | }; |
| 137 | |
| 138 | static const char * const mips_cp0_names_r4000[32] = |
| 139 | { |
| 140 | "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", |
| 141 | "c0_context", "c0_pagemask", "c0_wired", "$7", |
| 142 | "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", |
| 143 | "c0_sr", "c0_cause", "c0_epc", "c0_prid", |
| 144 | "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", |
| 145 | "c0_xcontext", "$21", "$22", "$23", |
| 146 | "$24", "$25", "c0_ecc", "c0_cacheerr", |
| 147 | "c0_taglo", "c0_taghi", "c0_errorepc", "$31", |
| 148 | }; |
| 149 | |
| 150 | static const char * const mips_cp0_names_r5900[32] = |
| 151 | { |
| 152 | "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", |
| 153 | "c0_context", "c0_pagemask", "c0_wired", "$7", |
| 154 | "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", |
| 155 | "c0_sr", "c0_cause", "c0_epc", "c0_prid", |
| 156 | "c0_config", "$17", "$18", "$19", |
| 157 | "$20", "$21", "$22", "c0_badpaddr", |
| 158 | "c0_depc", "c0_perfcnt", "$26", "$27", |
| 159 | "c0_taglo", "c0_taghi", "c0_errorepc", "$31" |
| 160 | }; |
| 161 | |
| 162 | static const struct mips_cp0sel_name mips_cp0sel_names_mipsr5900[] = |
| 163 | { |
| 164 | { 24, 2, "c0_iab" }, |
| 165 | { 24, 3, "c0_iabm" }, |
| 166 | { 24, 4, "c0_dab" }, |
| 167 | { 24, 5, "c0_dabm" }, |
| 168 | { 24, 6, "c0_dvb" }, |
| 169 | { 24, 7, "c0_dvbm" }, |
| 170 | { 25, 1, "c0_perfcnt,1" }, |
| 171 | { 25, 2, "c0_perfcnt,2" } |
| 172 | }; |
| 173 | |
| 174 | static const char * const mips_cp0_names_mips3264[32] = |
| 175 | { |
| 176 | "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", |
| 177 | "c0_context", "c0_pagemask", "c0_wired", "$7", |
| 178 | "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", |
| 179 | "c0_status", "c0_cause", "c0_epc", "c0_prid", |
| 180 | "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", |
| 181 | "c0_xcontext", "$21", "$22", "c0_debug", |
| 182 | "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr", |
| 183 | "c0_taglo", "c0_taghi", "c0_errorepc", "c0_desave", |
| 184 | }; |
| 185 | |
| 186 | static const char * const mips_cp1_names_mips3264[32] = |
| 187 | { |
| 188 | "c1_fir", "c1_ufr", "$2", "$3", |
| 189 | "c1_unfr", "$5", "$6", "$7", |
| 190 | "$8", "$9", "$10", "$11", |
| 191 | "$12", "$13", "$14", "$15", |
| 192 | "$16", "$17", "$18", "$19", |
| 193 | "$20", "$21", "$22", "$23", |
| 194 | "$24", "c1_fccr", "c1_fexr", "$27", |
| 195 | "c1_fenr", "$29", "$30", "c1_fcsr" |
| 196 | }; |
| 197 | |
| 198 | static const struct mips_cp0sel_name mips_cp0sel_names_mips3264[] = |
| 199 | { |
| 200 | { 16, 1, "c0_config1" }, |
| 201 | { 16, 2, "c0_config2" }, |
| 202 | { 16, 3, "c0_config3" }, |
| 203 | { 18, 1, "c0_watchlo,1" }, |
| 204 | { 18, 2, "c0_watchlo,2" }, |
| 205 | { 18, 3, "c0_watchlo,3" }, |
| 206 | { 18, 4, "c0_watchlo,4" }, |
| 207 | { 18, 5, "c0_watchlo,5" }, |
| 208 | { 18, 6, "c0_watchlo,6" }, |
| 209 | { 18, 7, "c0_watchlo,7" }, |
| 210 | { 19, 1, "c0_watchhi,1" }, |
| 211 | { 19, 2, "c0_watchhi,2" }, |
| 212 | { 19, 3, "c0_watchhi,3" }, |
| 213 | { 19, 4, "c0_watchhi,4" }, |
| 214 | { 19, 5, "c0_watchhi,5" }, |
| 215 | { 19, 6, "c0_watchhi,6" }, |
| 216 | { 19, 7, "c0_watchhi,7" }, |
| 217 | { 25, 1, "c0_perfcnt,1" }, |
| 218 | { 25, 2, "c0_perfcnt,2" }, |
| 219 | { 25, 3, "c0_perfcnt,3" }, |
| 220 | { 25, 4, "c0_perfcnt,4" }, |
| 221 | { 25, 5, "c0_perfcnt,5" }, |
| 222 | { 25, 6, "c0_perfcnt,6" }, |
| 223 | { 25, 7, "c0_perfcnt,7" }, |
| 224 | { 27, 1, "c0_cacheerr,1" }, |
| 225 | { 27, 2, "c0_cacheerr,2" }, |
| 226 | { 27, 3, "c0_cacheerr,3" }, |
| 227 | { 28, 1, "c0_datalo" }, |
| 228 | { 29, 1, "c0_datahi" } |
| 229 | }; |
| 230 | |
| 231 | static const char * const mips_cp0_names_mips3264r2[32] = |
| 232 | { |
| 233 | "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", |
| 234 | "c0_context", "c0_pagemask", "c0_wired", "c0_hwrena", |
| 235 | "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", |
| 236 | "c0_status", "c0_cause", "c0_epc", "c0_prid", |
| 237 | "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", |
| 238 | "c0_xcontext", "$21", "$22", "c0_debug", |
| 239 | "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr", |
| 240 | "c0_taglo", "c0_taghi", "c0_errorepc", "c0_desave", |
| 241 | }; |
| 242 | |
| 243 | static const struct mips_cp0sel_name mips_cp0sel_names_mips3264r2[] = |
| 244 | { |
| 245 | { 4, 1, "c0_contextconfig" }, |
| 246 | { 0, 1, "c0_mvpcontrol" }, |
| 247 | { 0, 2, "c0_mvpconf0" }, |
| 248 | { 0, 3, "c0_mvpconf1" }, |
| 249 | { 1, 1, "c0_vpecontrol" }, |
| 250 | { 1, 2, "c0_vpeconf0" }, |
| 251 | { 1, 3, "c0_vpeconf1" }, |
| 252 | { 1, 4, "c0_yqmask" }, |
| 253 | { 1, 5, "c0_vpeschedule" }, |
| 254 | { 1, 6, "c0_vpeschefback" }, |
| 255 | { 2, 1, "c0_tcstatus" }, |
| 256 | { 2, 2, "c0_tcbind" }, |
| 257 | { 2, 3, "c0_tcrestart" }, |
| 258 | { 2, 4, "c0_tchalt" }, |
| 259 | { 2, 5, "c0_tccontext" }, |
| 260 | { 2, 6, "c0_tcschedule" }, |
| 261 | { 2, 7, "c0_tcschefback" }, |
| 262 | { 5, 1, "c0_pagegrain" }, |
| 263 | { 6, 1, "c0_srsconf0" }, |
| 264 | { 6, 2, "c0_srsconf1" }, |
| 265 | { 6, 3, "c0_srsconf2" }, |
| 266 | { 6, 4, "c0_srsconf3" }, |
| 267 | { 6, 5, "c0_srsconf4" }, |
| 268 | { 12, 1, "c0_intctl" }, |
| 269 | { 12, 2, "c0_srsctl" }, |
| 270 | { 12, 3, "c0_srsmap" }, |
| 271 | { 15, 1, "c0_ebase" }, |
| 272 | { 16, 1, "c0_config1" }, |
| 273 | { 16, 2, "c0_config2" }, |
| 274 | { 16, 3, "c0_config3" }, |
| 275 | { 18, 1, "c0_watchlo,1" }, |
| 276 | { 18, 2, "c0_watchlo,2" }, |
| 277 | { 18, 3, "c0_watchlo,3" }, |
| 278 | { 18, 4, "c0_watchlo,4" }, |
| 279 | { 18, 5, "c0_watchlo,5" }, |
| 280 | { 18, 6, "c0_watchlo,6" }, |
| 281 | { 18, 7, "c0_watchlo,7" }, |
| 282 | { 19, 1, "c0_watchhi,1" }, |
| 283 | { 19, 2, "c0_watchhi,2" }, |
| 284 | { 19, 3, "c0_watchhi,3" }, |
| 285 | { 19, 4, "c0_watchhi,4" }, |
| 286 | { 19, 5, "c0_watchhi,5" }, |
| 287 | { 19, 6, "c0_watchhi,6" }, |
| 288 | { 19, 7, "c0_watchhi,7" }, |
| 289 | { 23, 1, "c0_tracecontrol" }, |
| 290 | { 23, 2, "c0_tracecontrol2" }, |
| 291 | { 23, 3, "c0_usertracedata" }, |
| 292 | { 23, 4, "c0_tracebpc" }, |
| 293 | { 25, 1, "c0_perfcnt,1" }, |
| 294 | { 25, 2, "c0_perfcnt,2" }, |
| 295 | { 25, 3, "c0_perfcnt,3" }, |
| 296 | { 25, 4, "c0_perfcnt,4" }, |
| 297 | { 25, 5, "c0_perfcnt,5" }, |
| 298 | { 25, 6, "c0_perfcnt,6" }, |
| 299 | { 25, 7, "c0_perfcnt,7" }, |
| 300 | { 27, 1, "c0_cacheerr,1" }, |
| 301 | { 27, 2, "c0_cacheerr,2" }, |
| 302 | { 27, 3, "c0_cacheerr,3" }, |
| 303 | { 28, 1, "c0_datalo" }, |
| 304 | { 28, 2, "c0_taglo1" }, |
| 305 | { 28, 3, "c0_datalo1" }, |
| 306 | { 28, 4, "c0_taglo2" }, |
| 307 | { 28, 5, "c0_datalo2" }, |
| 308 | { 28, 6, "c0_taglo3" }, |
| 309 | { 28, 7, "c0_datalo3" }, |
| 310 | { 29, 1, "c0_datahi" }, |
| 311 | { 29, 2, "c0_taghi1" }, |
| 312 | { 29, 3, "c0_datahi1" }, |
| 313 | { 29, 4, "c0_taghi2" }, |
| 314 | { 29, 5, "c0_datahi2" }, |
| 315 | { 29, 6, "c0_taghi3" }, |
| 316 | { 29, 7, "c0_datahi3" }, |
| 317 | }; |
| 318 | |
| 319 | /* SB-1: MIPS64 (mips_cp0_names_mips3264) with minor mods. */ |
| 320 | static const char * const mips_cp0_names_sb1[32] = |
| 321 | { |
| 322 | "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", |
| 323 | "c0_context", "c0_pagemask", "c0_wired", "$7", |
| 324 | "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", |
| 325 | "c0_status", "c0_cause", "c0_epc", "c0_prid", |
| 326 | "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", |
| 327 | "c0_xcontext", "$21", "$22", "c0_debug", |
| 328 | "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr_i", |
| 329 | "c0_taglo_i", "c0_taghi_i", "c0_errorepc", "c0_desave", |
| 330 | }; |
| 331 | |
| 332 | static const struct mips_cp0sel_name mips_cp0sel_names_sb1[] = |
| 333 | { |
| 334 | { 16, 1, "c0_config1" }, |
| 335 | { 18, 1, "c0_watchlo,1" }, |
| 336 | { 19, 1, "c0_watchhi,1" }, |
| 337 | { 22, 0, "c0_perftrace" }, |
| 338 | { 23, 3, "c0_edebug" }, |
| 339 | { 25, 1, "c0_perfcnt,1" }, |
| 340 | { 25, 2, "c0_perfcnt,2" }, |
| 341 | { 25, 3, "c0_perfcnt,3" }, |
| 342 | { 25, 4, "c0_perfcnt,4" }, |
| 343 | { 25, 5, "c0_perfcnt,5" }, |
| 344 | { 25, 6, "c0_perfcnt,6" }, |
| 345 | { 25, 7, "c0_perfcnt,7" }, |
| 346 | { 26, 1, "c0_buserr_pa" }, |
| 347 | { 27, 1, "c0_cacheerr_d" }, |
| 348 | { 27, 3, "c0_cacheerr_d_pa" }, |
| 349 | { 28, 1, "c0_datalo_i" }, |
| 350 | { 28, 2, "c0_taglo_d" }, |
| 351 | { 28, 3, "c0_datalo_d" }, |
| 352 | { 29, 1, "c0_datahi_i" }, |
| 353 | { 29, 2, "c0_taghi_d" }, |
| 354 | { 29, 3, "c0_datahi_d" }, |
| 355 | }; |
| 356 | |
| 357 | /* Xlr cop0 register names. */ |
| 358 | static const char * const mips_cp0_names_xlr[32] = { |
| 359 | "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", |
| 360 | "c0_context", "c0_pagemask", "c0_wired", "$7", |
| 361 | "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", |
| 362 | "c0_status", "c0_cause", "c0_epc", "c0_prid", |
| 363 | "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", |
| 364 | "c0_xcontext", "$21", "$22", "c0_debug", |
| 365 | "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr_i", |
| 366 | "c0_taglo_i", "c0_taghi_i", "c0_errorepc", "c0_desave", |
| 367 | }; |
| 368 | |
| 369 | /* XLR's CP0 Select Registers. */ |
| 370 | |
| 371 | static const struct mips_cp0sel_name mips_cp0sel_names_xlr[] = { |
| 372 | { 9, 6, "c0_extintreq" }, |
| 373 | { 9, 7, "c0_extintmask" }, |
| 374 | { 15, 1, "c0_ebase" }, |
| 375 | { 16, 1, "c0_config1" }, |
| 376 | { 16, 2, "c0_config2" }, |
| 377 | { 16, 3, "c0_config3" }, |
| 378 | { 16, 7, "c0_procid2" }, |
| 379 | { 18, 1, "c0_watchlo,1" }, |
| 380 | { 18, 2, "c0_watchlo,2" }, |
| 381 | { 18, 3, "c0_watchlo,3" }, |
| 382 | { 18, 4, "c0_watchlo,4" }, |
| 383 | { 18, 5, "c0_watchlo,5" }, |
| 384 | { 18, 6, "c0_watchlo,6" }, |
| 385 | { 18, 7, "c0_watchlo,7" }, |
| 386 | { 19, 1, "c0_watchhi,1" }, |
| 387 | { 19, 2, "c0_watchhi,2" }, |
| 388 | { 19, 3, "c0_watchhi,3" }, |
| 389 | { 19, 4, "c0_watchhi,4" }, |
| 390 | { 19, 5, "c0_watchhi,5" }, |
| 391 | { 19, 6, "c0_watchhi,6" }, |
| 392 | { 19, 7, "c0_watchhi,7" }, |
| 393 | { 25, 1, "c0_perfcnt,1" }, |
| 394 | { 25, 2, "c0_perfcnt,2" }, |
| 395 | { 25, 3, "c0_perfcnt,3" }, |
| 396 | { 25, 4, "c0_perfcnt,4" }, |
| 397 | { 25, 5, "c0_perfcnt,5" }, |
| 398 | { 25, 6, "c0_perfcnt,6" }, |
| 399 | { 25, 7, "c0_perfcnt,7" }, |
| 400 | { 27, 1, "c0_cacheerr,1" }, |
| 401 | { 27, 2, "c0_cacheerr,2" }, |
| 402 | { 27, 3, "c0_cacheerr,3" }, |
| 403 | { 28, 1, "c0_datalo" }, |
| 404 | { 29, 1, "c0_datahi" } |
| 405 | }; |
| 406 | |
| 407 | static const char * const mips_hwr_names_numeric[32] = |
| 408 | { |
| 409 | "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", |
| 410 | "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| 411 | "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", |
| 412 | "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" |
| 413 | }; |
| 414 | |
| 415 | static const char * const mips_hwr_names_mips3264r2[32] = |
| 416 | { |
| 417 | "hwr_cpunum", "hwr_synci_step", "hwr_cc", "hwr_ccres", |
| 418 | "$4", "$5", "$6", "$7", |
| 419 | "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| 420 | "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", |
| 421 | "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" |
| 422 | }; |
| 423 | |
| 424 | static const char * const msa_control_names[32] = |
| 425 | { |
| 426 | "msa_ir", "msa_csr", "msa_access", "msa_save", |
| 427 | "msa_modify", "msa_request", "msa_map", "msa_unmap", |
| 428 | "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| 429 | "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", |
| 430 | "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" |
| 431 | }; |
| 432 | |
| 433 | struct mips_abi_choice |
| 434 | { |
| 435 | const char * name; |
| 436 | const char * const *gpr_names; |
| 437 | const char * const *fpr_names; |
| 438 | }; |
| 439 | |
| 440 | struct mips_abi_choice mips_abi_choices[] = |
| 441 | { |
| 442 | { "numeric", mips_gpr_names_numeric, mips_fpr_names_numeric }, |
| 443 | { "32", mips_gpr_names_oldabi, mips_fpr_names_32 }, |
| 444 | { "n32", mips_gpr_names_newabi, mips_fpr_names_n32 }, |
| 445 | { "64", mips_gpr_names_newabi, mips_fpr_names_64 }, |
| 446 | }; |
| 447 | |
| 448 | struct mips_arch_choice |
| 449 | { |
| 450 | const char *name; |
| 451 | int bfd_mach_valid; |
| 452 | unsigned long bfd_mach; |
| 453 | int processor; |
| 454 | int isa; |
| 455 | int ase; |
| 456 | const char * const *cp0_names; |
| 457 | const struct mips_cp0sel_name *cp0sel_names; |
| 458 | unsigned int cp0sel_names_len; |
| 459 | const char * const *cp1_names; |
| 460 | const char * const *hwr_names; |
| 461 | }; |
| 462 | |
| 463 | const struct mips_arch_choice mips_arch_choices[] = |
| 464 | { |
| 465 | { "numeric", 0, 0, 0, 0, 0, |
| 466 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 467 | mips_hwr_names_numeric }, |
| 468 | |
| 469 | { "r3000", 1, bfd_mach_mips3000, CPU_R3000, ISA_MIPS1, 0, |
| 470 | mips_cp0_names_r3000, NULL, 0, mips_cp1_names_numeric, |
| 471 | mips_hwr_names_numeric }, |
| 472 | { "r3900", 1, bfd_mach_mips3900, CPU_R3900, ISA_MIPS1, 0, |
| 473 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 474 | mips_hwr_names_numeric }, |
| 475 | { "r4000", 1, bfd_mach_mips4000, CPU_R4000, ISA_MIPS3, 0, |
| 476 | mips_cp0_names_r4000, NULL, 0, mips_cp1_names_numeric, |
| 477 | mips_hwr_names_numeric }, |
| 478 | { "r4010", 1, bfd_mach_mips4010, CPU_R4010, ISA_MIPS2, 0, |
| 479 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 480 | mips_hwr_names_numeric }, |
| 481 | { "vr4100", 1, bfd_mach_mips4100, CPU_VR4100, ISA_MIPS3, 0, |
| 482 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 483 | mips_hwr_names_numeric }, |
| 484 | { "vr4111", 1, bfd_mach_mips4111, CPU_R4111, ISA_MIPS3, 0, |
| 485 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 486 | mips_hwr_names_numeric }, |
| 487 | { "vr4120", 1, bfd_mach_mips4120, CPU_VR4120, ISA_MIPS3, 0, |
| 488 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 489 | mips_hwr_names_numeric }, |
| 490 | { "r4300", 1, bfd_mach_mips4300, CPU_R4300, ISA_MIPS3, 0, |
| 491 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 492 | mips_hwr_names_numeric }, |
| 493 | { "r4400", 1, bfd_mach_mips4400, CPU_R4400, ISA_MIPS3, 0, |
| 494 | mips_cp0_names_r4000, NULL, 0, mips_cp1_names_numeric, |
| 495 | mips_hwr_names_numeric }, |
| 496 | { "r4600", 1, bfd_mach_mips4600, CPU_R4600, ISA_MIPS3, 0, |
| 497 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 498 | mips_hwr_names_numeric }, |
| 499 | { "r4650", 1, bfd_mach_mips4650, CPU_R4650, ISA_MIPS3, 0, |
| 500 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 501 | mips_hwr_names_numeric }, |
| 502 | { "r5000", 1, bfd_mach_mips5000, CPU_R5000, ISA_MIPS4, 0, |
| 503 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 504 | mips_hwr_names_numeric }, |
| 505 | { "vr5400", 1, bfd_mach_mips5400, CPU_VR5400, ISA_MIPS4, 0, |
| 506 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 507 | mips_hwr_names_numeric }, |
| 508 | { "vr5500", 1, bfd_mach_mips5500, CPU_VR5500, ISA_MIPS4, 0, |
| 509 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 510 | mips_hwr_names_numeric }, |
| 511 | { "r5900", 1, bfd_mach_mips5900, CPU_R5900, ISA_MIPS3, 0, |
| 512 | mips_cp0_names_r5900, NULL, 0, mips_cp1_names_numeric, |
| 513 | mips_hwr_names_numeric }, |
| 514 | { "r6000", 1, bfd_mach_mips6000, CPU_R6000, ISA_MIPS2, 0, |
| 515 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 516 | mips_hwr_names_numeric }, |
| 517 | { "rm7000", 1, bfd_mach_mips7000, CPU_RM7000, ISA_MIPS4, 0, |
| 518 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 519 | mips_hwr_names_numeric }, |
| 520 | { "rm9000", 1, bfd_mach_mips7000, CPU_RM7000, ISA_MIPS4, 0, |
| 521 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 522 | mips_hwr_names_numeric }, |
| 523 | { "r8000", 1, bfd_mach_mips8000, CPU_R8000, ISA_MIPS4, 0, |
| 524 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 525 | mips_hwr_names_numeric }, |
| 526 | { "r10000", 1, bfd_mach_mips10000, CPU_R10000, ISA_MIPS4, 0, |
| 527 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 528 | mips_hwr_names_numeric }, |
| 529 | { "r12000", 1, bfd_mach_mips12000, CPU_R12000, ISA_MIPS4, 0, |
| 530 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 531 | mips_hwr_names_numeric }, |
| 532 | { "r14000", 1, bfd_mach_mips14000, CPU_R14000, ISA_MIPS4, 0, |
| 533 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 534 | mips_hwr_names_numeric }, |
| 535 | { "r16000", 1, bfd_mach_mips16000, CPU_R16000, ISA_MIPS4, 0, |
| 536 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 537 | mips_hwr_names_numeric }, |
| 538 | { "mips5", 1, bfd_mach_mips5, CPU_MIPS5, ISA_MIPS5, 0, |
| 539 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 540 | mips_hwr_names_numeric }, |
| 541 | |
| 542 | /* For stock MIPS32, disassemble all applicable MIPS-specified ASEs. |
| 543 | Note that MIPS-3D and MDMX are not applicable to MIPS32. (See |
| 544 | _MIPS32 Architecture For Programmers Volume I: Introduction to the |
| 545 | MIPS32 Architecture_ (MIPS Document Number MD00082, Revision 0.95), |
| 546 | page 1. */ |
| 547 | { "mips32", 1, bfd_mach_mipsisa32, CPU_MIPS32, |
| 548 | ISA_MIPS32, ASE_SMARTMIPS, |
| 549 | mips_cp0_names_mips3264, |
| 550 | mips_cp0sel_names_mips3264, ARRAY_SIZE (mips_cp0sel_names_mips3264), |
| 551 | mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 552 | |
| 553 | { "mips32r2", 1, bfd_mach_mipsisa32r2, CPU_MIPS32R2, |
| 554 | ISA_MIPS32R2, |
| 555 | (ASE_SMARTMIPS | ASE_DSP | ASE_DSPR2 | ASE_EVA | ASE_MIPS3D |
| 556 | | ASE_MT | ASE_MCU | ASE_VIRT | ASE_MSA), |
| 557 | mips_cp0_names_mips3264r2, |
| 558 | mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), |
| 559 | mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, |
| 560 | |
| 561 | /* For stock MIPS64, disassemble all applicable MIPS-specified ASEs. */ |
| 562 | { "mips64", 1, bfd_mach_mipsisa64, CPU_MIPS64, |
| 563 | ISA_MIPS64, ASE_MIPS3D | ASE_MDMX, |
| 564 | mips_cp0_names_mips3264, |
| 565 | mips_cp0sel_names_mips3264, ARRAY_SIZE (mips_cp0sel_names_mips3264), |
| 566 | mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 567 | |
| 568 | { "mips64r2", 1, bfd_mach_mipsisa64r2, CPU_MIPS64R2, |
| 569 | ISA_MIPS64R2, |
| 570 | (ASE_MIPS3D | ASE_DSP | ASE_DSPR2 | ASE_DSP64 | ASE_EVA | ASE_MT |
| 571 | | ASE_MCU | ASE_VIRT | ASE_VIRT64 | ASE_MSA | ASE_MSA64), |
| 572 | mips_cp0_names_mips3264r2, |
| 573 | mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), |
| 574 | mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, |
| 575 | |
| 576 | { "sb1", 1, bfd_mach_mips_sb1, CPU_SB1, |
| 577 | ISA_MIPS64 | INSN_SB1, ASE_MIPS3D, |
| 578 | mips_cp0_names_sb1, |
| 579 | mips_cp0sel_names_sb1, ARRAY_SIZE (mips_cp0sel_names_sb1), |
| 580 | mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 581 | |
| 582 | { "loongson2e", 1, bfd_mach_mips_loongson_2e, CPU_LOONGSON_2E, |
| 583 | ISA_MIPS3 | INSN_LOONGSON_2E, 0, mips_cp0_names_numeric, |
| 584 | NULL, 0, mips_cp1_names_numeric, mips_hwr_names_numeric }, |
| 585 | |
| 586 | { "loongson2f", 1, bfd_mach_mips_loongson_2f, CPU_LOONGSON_2F, |
| 587 | ISA_MIPS3 | INSN_LOONGSON_2F, 0, mips_cp0_names_numeric, |
| 588 | NULL, 0, mips_cp1_names_numeric, mips_hwr_names_numeric }, |
| 589 | |
| 590 | { "loongson3a", 1, bfd_mach_mips_loongson_3a, CPU_LOONGSON_3A, |
| 591 | ISA_MIPS64 | INSN_LOONGSON_3A, 0, mips_cp0_names_numeric, |
| 592 | NULL, 0, mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 593 | |
| 594 | { "octeon", 1, bfd_mach_mips_octeon, CPU_OCTEON, |
| 595 | ISA_MIPS64R2 | INSN_OCTEON, 0, mips_cp0_names_numeric, NULL, 0, |
| 596 | mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 597 | |
| 598 | { "octeon+", 1, bfd_mach_mips_octeonp, CPU_OCTEONP, |
| 599 | ISA_MIPS64R2 | INSN_OCTEONP, 0, mips_cp0_names_numeric, |
| 600 | NULL, 0, mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 601 | |
| 602 | { "octeon2", 1, bfd_mach_mips_octeon2, CPU_OCTEON2, |
| 603 | ISA_MIPS64R2 | INSN_OCTEON2, 0, mips_cp0_names_numeric, |
| 604 | NULL, 0, mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 605 | |
| 606 | { "xlr", 1, bfd_mach_mips_xlr, CPU_XLR, |
| 607 | ISA_MIPS64 | INSN_XLR, 0, |
| 608 | mips_cp0_names_xlr, |
| 609 | mips_cp0sel_names_xlr, ARRAY_SIZE (mips_cp0sel_names_xlr), |
| 610 | mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 611 | |
| 612 | /* XLP is mostly like XLR, with the prominent exception it is being |
| 613 | MIPS64R2. */ |
| 614 | { "xlp", 1, bfd_mach_mips_xlr, CPU_XLR, |
| 615 | ISA_MIPS64R2 | INSN_XLR, 0, |
| 616 | mips_cp0_names_xlr, |
| 617 | mips_cp0sel_names_xlr, ARRAY_SIZE (mips_cp0sel_names_xlr), |
| 618 | mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 619 | |
| 620 | /* This entry, mips16, is here only for ISA/processor selection; do |
| 621 | not print its name. */ |
| 622 | { "", 1, bfd_mach_mips16, CPU_MIPS16, ISA_MIPS3, 0, |
| 623 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 624 | mips_hwr_names_numeric }, |
| 625 | }; |
| 626 | |
| 627 | /* ISA and processor type to disassemble for, and register names to use. |
| 628 | set_default_mips_dis_options and parse_mips_dis_options fill in these |
| 629 | values. */ |
| 630 | static int mips_processor; |
| 631 | static int mips_isa; |
| 632 | static int mips_ase; |
| 633 | static int micromips_ase; |
| 634 | static const char * const *mips_gpr_names; |
| 635 | static const char * const *mips_fpr_names; |
| 636 | static const char * const *mips_cp0_names; |
| 637 | static const struct mips_cp0sel_name *mips_cp0sel_names; |
| 638 | static int mips_cp0sel_names_len; |
| 639 | static const char * const *mips_cp1_names; |
| 640 | static const char * const *mips_hwr_names; |
| 641 | |
| 642 | /* Other options */ |
| 643 | static int no_aliases; /* If set disassemble as most general inst. */ |
| 644 | \f |
| 645 | static const struct mips_abi_choice * |
| 646 | choose_abi_by_name (const char *name, unsigned int namelen) |
| 647 | { |
| 648 | const struct mips_abi_choice *c; |
| 649 | unsigned int i; |
| 650 | |
| 651 | for (i = 0, c = NULL; i < ARRAY_SIZE (mips_abi_choices) && c == NULL; i++) |
| 652 | if (strncmp (mips_abi_choices[i].name, name, namelen) == 0 |
| 653 | && strlen (mips_abi_choices[i].name) == namelen) |
| 654 | c = &mips_abi_choices[i]; |
| 655 | |
| 656 | return c; |
| 657 | } |
| 658 | |
| 659 | static const struct mips_arch_choice * |
| 660 | choose_arch_by_name (const char *name, unsigned int namelen) |
| 661 | { |
| 662 | const struct mips_arch_choice *c = NULL; |
| 663 | unsigned int i; |
| 664 | |
| 665 | for (i = 0, c = NULL; i < ARRAY_SIZE (mips_arch_choices) && c == NULL; i++) |
| 666 | if (strncmp (mips_arch_choices[i].name, name, namelen) == 0 |
| 667 | && strlen (mips_arch_choices[i].name) == namelen) |
| 668 | c = &mips_arch_choices[i]; |
| 669 | |
| 670 | return c; |
| 671 | } |
| 672 | |
| 673 | static const struct mips_arch_choice * |
| 674 | choose_arch_by_number (unsigned long mach) |
| 675 | { |
| 676 | static unsigned long hint_bfd_mach; |
| 677 | static const struct mips_arch_choice *hint_arch_choice; |
| 678 | const struct mips_arch_choice *c; |
| 679 | unsigned int i; |
| 680 | |
| 681 | /* We optimize this because even if the user specifies no |
| 682 | flags, this will be done for every instruction! */ |
| 683 | if (hint_bfd_mach == mach |
| 684 | && hint_arch_choice != NULL |
| 685 | && hint_arch_choice->bfd_mach == hint_bfd_mach) |
| 686 | return hint_arch_choice; |
| 687 | |
| 688 | for (i = 0, c = NULL; i < ARRAY_SIZE (mips_arch_choices) && c == NULL; i++) |
| 689 | { |
| 690 | if (mips_arch_choices[i].bfd_mach_valid |
| 691 | && mips_arch_choices[i].bfd_mach == mach) |
| 692 | { |
| 693 | c = &mips_arch_choices[i]; |
| 694 | hint_bfd_mach = mach; |
| 695 | hint_arch_choice = c; |
| 696 | } |
| 697 | } |
| 698 | return c; |
| 699 | } |
| 700 | |
| 701 | /* Check if the object uses NewABI conventions. */ |
| 702 | |
| 703 | static int |
| 704 | is_newabi (Elf_Internal_Ehdr *header) |
| 705 | { |
| 706 | /* There are no old-style ABIs which use 64-bit ELF. */ |
| 707 | if (header->e_ident[EI_CLASS] == ELFCLASS64) |
| 708 | return 1; |
| 709 | |
| 710 | /* If a 32-bit ELF file, n32 is a new-style ABI. */ |
| 711 | if ((header->e_flags & EF_MIPS_ABI2) != 0) |
| 712 | return 1; |
| 713 | |
| 714 | return 0; |
| 715 | } |
| 716 | |
| 717 | /* Check if the object has microMIPS ASE code. */ |
| 718 | |
| 719 | static int |
| 720 | is_micromips (Elf_Internal_Ehdr *header) |
| 721 | { |
| 722 | if ((header->e_flags & EF_MIPS_ARCH_ASE_MICROMIPS) != 0) |
| 723 | return 1; |
| 724 | |
| 725 | return 0; |
| 726 | } |
| 727 | |
| 728 | static void |
| 729 | set_default_mips_dis_options (struct disassemble_info *info) |
| 730 | { |
| 731 | const struct mips_arch_choice *chosen_arch; |
| 732 | |
| 733 | /* Defaults: mipsIII/r3000 (?!), no microMIPS ASE (any compressed code |
| 734 | is MIPS16 ASE) (o)32-style ("oldabi") GPR names, and numeric FPR, |
| 735 | CP0 register, and HWR names. */ |
| 736 | mips_isa = ISA_MIPS3; |
| 737 | mips_processor = CPU_R3000; |
| 738 | micromips_ase = 0; |
| 739 | mips_ase = 0; |
| 740 | mips_gpr_names = mips_gpr_names_oldabi; |
| 741 | mips_fpr_names = mips_fpr_names_numeric; |
| 742 | mips_cp0_names = mips_cp0_names_numeric; |
| 743 | mips_cp0sel_names = NULL; |
| 744 | mips_cp0sel_names_len = 0; |
| 745 | mips_cp1_names = mips_cp1_names_numeric; |
| 746 | mips_hwr_names = mips_hwr_names_numeric; |
| 747 | no_aliases = 0; |
| 748 | |
| 749 | /* Update settings according to the ELF file header flags. */ |
| 750 | if (info->flavour == bfd_target_elf_flavour && info->section != NULL) |
| 751 | { |
| 752 | Elf_Internal_Ehdr *header; |
| 753 | |
| 754 | header = elf_elfheader (info->section->owner); |
| 755 | /* If an ELF "newabi" binary, use the n32/(n)64 GPR names. */ |
| 756 | if (is_newabi (header)) |
| 757 | mips_gpr_names = mips_gpr_names_newabi; |
| 758 | /* If a microMIPS binary, then don't use MIPS16 bindings. */ |
| 759 | micromips_ase = is_micromips (header); |
| 760 | } |
| 761 | |
| 762 | /* Set ISA, architecture, and cp0 register names as best we can. */ |
| 763 | #if ! SYMTAB_AVAILABLE |
| 764 | /* This is running out on a target machine, not in a host tool. |
| 765 | FIXME: Where does mips_target_info come from? */ |
| 766 | target_processor = mips_target_info.processor; |
| 767 | mips_isa = mips_target_info.isa; |
| 768 | mips_ase = mips_target_info.ase; |
| 769 | #else |
| 770 | chosen_arch = choose_arch_by_number (info->mach); |
| 771 | if (chosen_arch != NULL) |
| 772 | { |
| 773 | mips_processor = chosen_arch->processor; |
| 774 | mips_isa = chosen_arch->isa; |
| 775 | mips_ase = chosen_arch->ase; |
| 776 | mips_cp0_names = chosen_arch->cp0_names; |
| 777 | mips_cp0sel_names = chosen_arch->cp0sel_names; |
| 778 | mips_cp0sel_names_len = chosen_arch->cp0sel_names_len; |
| 779 | mips_cp1_names = chosen_arch->cp1_names; |
| 780 | mips_hwr_names = chosen_arch->hwr_names; |
| 781 | } |
| 782 | #endif |
| 783 | } |
| 784 | |
| 785 | static void |
| 786 | parse_mips_dis_option (const char *option, unsigned int len) |
| 787 | { |
| 788 | unsigned int i, optionlen, vallen; |
| 789 | const char *val; |
| 790 | const struct mips_abi_choice *chosen_abi; |
| 791 | const struct mips_arch_choice *chosen_arch; |
| 792 | |
| 793 | /* Try to match options that are simple flags */ |
| 794 | if (CONST_STRNEQ (option, "no-aliases")) |
| 795 | { |
| 796 | no_aliases = 1; |
| 797 | return; |
| 798 | } |
| 799 | |
| 800 | if (CONST_STRNEQ (option, "msa")) |
| 801 | { |
| 802 | mips_ase |= ASE_MSA; |
| 803 | if ((mips_isa & INSN_ISA_MASK) == ISA_MIPS64R2) |
| 804 | mips_ase |= ASE_MSA64; |
| 805 | return; |
| 806 | } |
| 807 | |
| 808 | if (CONST_STRNEQ (option, "virt")) |
| 809 | { |
| 810 | mips_ase |= ASE_VIRT; |
| 811 | if (mips_isa & ISA_MIPS64R2) |
| 812 | mips_ase |= ASE_VIRT64; |
| 813 | return; |
| 814 | } |
| 815 | |
| 816 | /* Look for the = that delimits the end of the option name. */ |
| 817 | for (i = 0; i < len; i++) |
| 818 | if (option[i] == '=') |
| 819 | break; |
| 820 | |
| 821 | if (i == 0) /* Invalid option: no name before '='. */ |
| 822 | return; |
| 823 | if (i == len) /* Invalid option: no '='. */ |
| 824 | return; |
| 825 | if (i == (len - 1)) /* Invalid option: no value after '='. */ |
| 826 | return; |
| 827 | |
| 828 | optionlen = i; |
| 829 | val = option + (optionlen + 1); |
| 830 | vallen = len - (optionlen + 1); |
| 831 | |
| 832 | if (strncmp ("gpr-names", option, optionlen) == 0 |
| 833 | && strlen ("gpr-names") == optionlen) |
| 834 | { |
| 835 | chosen_abi = choose_abi_by_name (val, vallen); |
| 836 | if (chosen_abi != NULL) |
| 837 | mips_gpr_names = chosen_abi->gpr_names; |
| 838 | return; |
| 839 | } |
| 840 | |
| 841 | if (strncmp ("fpr-names", option, optionlen) == 0 |
| 842 | && strlen ("fpr-names") == optionlen) |
| 843 | { |
| 844 | chosen_abi = choose_abi_by_name (val, vallen); |
| 845 | if (chosen_abi != NULL) |
| 846 | mips_fpr_names = chosen_abi->fpr_names; |
| 847 | return; |
| 848 | } |
| 849 | |
| 850 | if (strncmp ("cp0-names", option, optionlen) == 0 |
| 851 | && strlen ("cp0-names") == optionlen) |
| 852 | { |
| 853 | chosen_arch = choose_arch_by_name (val, vallen); |
| 854 | if (chosen_arch != NULL) |
| 855 | { |
| 856 | mips_cp0_names = chosen_arch->cp0_names; |
| 857 | mips_cp0sel_names = chosen_arch->cp0sel_names; |
| 858 | mips_cp0sel_names_len = chosen_arch->cp0sel_names_len; |
| 859 | } |
| 860 | return; |
| 861 | } |
| 862 | |
| 863 | if (strncmp ("cp1-names", option, optionlen) == 0 |
| 864 | && strlen ("cp1-names") == optionlen) |
| 865 | { |
| 866 | chosen_arch = choose_arch_by_name (val, vallen); |
| 867 | if (chosen_arch != NULL) |
| 868 | mips_cp1_names = chosen_arch->cp1_names; |
| 869 | return; |
| 870 | } |
| 871 | |
| 872 | if (strncmp ("hwr-names", option, optionlen) == 0 |
| 873 | && strlen ("hwr-names") == optionlen) |
| 874 | { |
| 875 | chosen_arch = choose_arch_by_name (val, vallen); |
| 876 | if (chosen_arch != NULL) |
| 877 | mips_hwr_names = chosen_arch->hwr_names; |
| 878 | return; |
| 879 | } |
| 880 | |
| 881 | if (strncmp ("reg-names", option, optionlen) == 0 |
| 882 | && strlen ("reg-names") == optionlen) |
| 883 | { |
| 884 | /* We check both ABI and ARCH here unconditionally, so |
| 885 | that "numeric" will do the desirable thing: select |
| 886 | numeric register names for all registers. Other than |
| 887 | that, a given name probably won't match both. */ |
| 888 | chosen_abi = choose_abi_by_name (val, vallen); |
| 889 | if (chosen_abi != NULL) |
| 890 | { |
| 891 | mips_gpr_names = chosen_abi->gpr_names; |
| 892 | mips_fpr_names = chosen_abi->fpr_names; |
| 893 | } |
| 894 | chosen_arch = choose_arch_by_name (val, vallen); |
| 895 | if (chosen_arch != NULL) |
| 896 | { |
| 897 | mips_cp0_names = chosen_arch->cp0_names; |
| 898 | mips_cp0sel_names = chosen_arch->cp0sel_names; |
| 899 | mips_cp0sel_names_len = chosen_arch->cp0sel_names_len; |
| 900 | mips_cp1_names = chosen_arch->cp1_names; |
| 901 | mips_hwr_names = chosen_arch->hwr_names; |
| 902 | } |
| 903 | return; |
| 904 | } |
| 905 | |
| 906 | /* Invalid option. */ |
| 907 | } |
| 908 | |
| 909 | static void |
| 910 | parse_mips_dis_options (const char *options) |
| 911 | { |
| 912 | const char *option_end; |
| 913 | |
| 914 | if (options == NULL) |
| 915 | return; |
| 916 | |
| 917 | while (*options != '\0') |
| 918 | { |
| 919 | /* Skip empty options. */ |
| 920 | if (*options == ',') |
| 921 | { |
| 922 | options++; |
| 923 | continue; |
| 924 | } |
| 925 | |
| 926 | /* We know that *options is neither NUL or a comma. */ |
| 927 | option_end = options + 1; |
| 928 | while (*option_end != ',' && *option_end != '\0') |
| 929 | option_end++; |
| 930 | |
| 931 | parse_mips_dis_option (options, option_end - options); |
| 932 | |
| 933 | /* Go on to the next one. If option_end points to a comma, it |
| 934 | will be skipped above. */ |
| 935 | options = option_end; |
| 936 | } |
| 937 | } |
| 938 | |
| 939 | static const struct mips_cp0sel_name * |
| 940 | lookup_mips_cp0sel_name (const struct mips_cp0sel_name *names, |
| 941 | unsigned int len, |
| 942 | unsigned int cp0reg, |
| 943 | unsigned int sel) |
| 944 | { |
| 945 | unsigned int i; |
| 946 | |
| 947 | for (i = 0; i < len; i++) |
| 948 | if (names[i].cp0reg == cp0reg && names[i].sel == sel) |
| 949 | return &names[i]; |
| 950 | return NULL; |
| 951 | } |
| 952 | |
| 953 | /* Print register REGNO, of type TYPE, for instruction OPCODE. */ |
| 954 | |
| 955 | static void |
| 956 | print_reg (struct disassemble_info *info, const struct mips_opcode *opcode, |
| 957 | enum mips_reg_operand_type type, int regno) |
| 958 | { |
| 959 | switch (type) |
| 960 | { |
| 961 | case OP_REG_GP: |
| 962 | info->fprintf_func (info->stream, "%s", mips_gpr_names[regno]); |
| 963 | break; |
| 964 | |
| 965 | case OP_REG_FP: |
| 966 | info->fprintf_func (info->stream, "%s", mips_fpr_names[regno]); |
| 967 | break; |
| 968 | |
| 969 | case OP_REG_CCC: |
| 970 | if (opcode->pinfo & (FP_D | FP_S)) |
| 971 | info->fprintf_func (info->stream, "$fcc%d", regno); |
| 972 | else |
| 973 | info->fprintf_func (info->stream, "$cc%d", regno); |
| 974 | break; |
| 975 | |
| 976 | case OP_REG_VEC: |
| 977 | if (opcode->membership & INSN_5400) |
| 978 | info->fprintf_func (info->stream, "$f%d", regno); |
| 979 | else |
| 980 | info->fprintf_func (info->stream, "$v%d", regno); |
| 981 | break; |
| 982 | |
| 983 | case OP_REG_ACC: |
| 984 | info->fprintf_func (info->stream, "$ac%d", regno); |
| 985 | break; |
| 986 | |
| 987 | case OP_REG_COPRO: |
| 988 | if (opcode->name[strlen (opcode->name) - 1] == '0') |
| 989 | info->fprintf_func (info->stream, "%s", mips_cp0_names[regno]); |
| 990 | else if (opcode->name[strlen (opcode->name) - 1] == '1') |
| 991 | info->fprintf_func (info->stream, "%s", mips_cp1_names[regno]); |
| 992 | else |
| 993 | info->fprintf_func (info->stream, "$%d", regno); |
| 994 | break; |
| 995 | |
| 996 | case OP_REG_HW: |
| 997 | info->fprintf_func (info->stream, "%s", mips_hwr_names[regno]); |
| 998 | break; |
| 999 | |
| 1000 | case OP_REG_VF: |
| 1001 | info->fprintf_func (info->stream, "$vf%d", regno); |
| 1002 | break; |
| 1003 | |
| 1004 | case OP_REG_VI: |
| 1005 | info->fprintf_func (info->stream, "$vi%d", regno); |
| 1006 | break; |
| 1007 | |
| 1008 | case OP_REG_R5900_I: |
| 1009 | info->fprintf_func (info->stream, "$I"); |
| 1010 | break; |
| 1011 | |
| 1012 | case OP_REG_R5900_Q: |
| 1013 | info->fprintf_func (info->stream, "$Q"); |
| 1014 | break; |
| 1015 | |
| 1016 | case OP_REG_R5900_R: |
| 1017 | info->fprintf_func (info->stream, "$R"); |
| 1018 | break; |
| 1019 | |
| 1020 | case OP_REG_R5900_ACC: |
| 1021 | info->fprintf_func (info->stream, "$ACC"); |
| 1022 | break; |
| 1023 | |
| 1024 | case OP_REG_MSA: |
| 1025 | info->fprintf_func (info->stream, "$w%d", regno); |
| 1026 | break; |
| 1027 | |
| 1028 | case OP_REG_MSA_CTRL: |
| 1029 | info->fprintf_func (info->stream, "%s", msa_control_names[regno]); |
| 1030 | break; |
| 1031 | |
| 1032 | } |
| 1033 | } |
| 1034 | \f |
| 1035 | /* Used to track the state carried over from previous operands in |
| 1036 | an instruction. */ |
| 1037 | struct mips_print_arg_state { |
| 1038 | /* The value of the last OP_INT seen. We only use this for OP_MSB, |
| 1039 | where the value is known to be unsigned and small. */ |
| 1040 | unsigned int last_int; |
| 1041 | |
| 1042 | /* The type and number of the last OP_REG seen. We only use this for |
| 1043 | OP_REPEAT_DEST_REG and OP_REPEAT_PREV_REG. */ |
| 1044 | enum mips_reg_operand_type last_reg_type; |
| 1045 | unsigned int last_regno; |
| 1046 | }; |
| 1047 | |
| 1048 | /* Initialize STATE for the start of an instruction. */ |
| 1049 | |
| 1050 | static inline void |
| 1051 | init_print_arg_state (struct mips_print_arg_state *state) |
| 1052 | { |
| 1053 | memset (state, 0, sizeof (*state)); |
| 1054 | } |
| 1055 | |
| 1056 | /* Print OP_VU0_SUFFIX or OP_VU0_MATCH_SUFFIX operand OPERAND, |
| 1057 | whose value is given by UVAL. */ |
| 1058 | |
| 1059 | static void |
| 1060 | print_vu0_channel (struct disassemble_info *info, |
| 1061 | const struct mips_operand *operand, unsigned int uval) |
| 1062 | { |
| 1063 | if (operand->size == 4) |
| 1064 | info->fprintf_func (info->stream, "%s%s%s%s", |
| 1065 | uval & 8 ? "x" : "", |
| 1066 | uval & 4 ? "y" : "", |
| 1067 | uval & 2 ? "z" : "", |
| 1068 | uval & 1 ? "w" : ""); |
| 1069 | else if (operand->size == 2) |
| 1070 | info->fprintf_func (info->stream, "%c", "xyzw"[uval]); |
| 1071 | else |
| 1072 | abort (); |
| 1073 | } |
| 1074 | |
| 1075 | /* Print operand OPERAND of OPCODE, using STATE to track inter-operand state. |
| 1076 | UVAL is the encoding of the operand (shifted into bit 0) and BASE_PC is |
| 1077 | the base address for OP_PCREL operands. */ |
| 1078 | |
| 1079 | static void |
| 1080 | print_insn_arg (struct disassemble_info *info, |
| 1081 | struct mips_print_arg_state *state, |
| 1082 | const struct mips_opcode *opcode, |
| 1083 | const struct mips_operand *operand, |
| 1084 | bfd_vma base_pc, |
| 1085 | unsigned int uval) |
| 1086 | { |
| 1087 | const fprintf_ftype infprintf = info->fprintf_func; |
| 1088 | void *is = info->stream; |
| 1089 | |
| 1090 | switch (operand->type) |
| 1091 | { |
| 1092 | case OP_INT: |
| 1093 | { |
| 1094 | const struct mips_int_operand *int_op; |
| 1095 | |
| 1096 | int_op = (const struct mips_int_operand *) operand; |
| 1097 | uval = mips_decode_int_operand (int_op, uval); |
| 1098 | state->last_int = uval; |
| 1099 | if (int_op->print_hex) |
| 1100 | infprintf (is, "0x%x", uval); |
| 1101 | else |
| 1102 | infprintf (is, "%d", uval); |
| 1103 | } |
| 1104 | break; |
| 1105 | |
| 1106 | case OP_MAPPED_INT: |
| 1107 | { |
| 1108 | const struct mips_mapped_int_operand *mint_op; |
| 1109 | |
| 1110 | mint_op = (const struct mips_mapped_int_operand *) operand; |
| 1111 | uval = mint_op->int_map[uval]; |
| 1112 | state->last_int = uval; |
| 1113 | if (mint_op->print_hex) |
| 1114 | infprintf (is, "0x%x", uval); |
| 1115 | else |
| 1116 | infprintf (is, "%d", uval); |
| 1117 | } |
| 1118 | break; |
| 1119 | |
| 1120 | case OP_MSB: |
| 1121 | { |
| 1122 | const struct mips_msb_operand *msb_op; |
| 1123 | |
| 1124 | msb_op = (const struct mips_msb_operand *) operand; |
| 1125 | uval += msb_op->bias; |
| 1126 | if (msb_op->add_lsb) |
| 1127 | uval -= state->last_int; |
| 1128 | infprintf (is, "0x%x", uval); |
| 1129 | } |
| 1130 | break; |
| 1131 | |
| 1132 | case OP_REG: |
| 1133 | case OP_OPTIONAL_REG: |
| 1134 | { |
| 1135 | const struct mips_reg_operand *reg_op; |
| 1136 | |
| 1137 | reg_op = (const struct mips_reg_operand *) operand; |
| 1138 | uval = mips_decode_reg_operand (reg_op, uval); |
| 1139 | print_reg (info, opcode, reg_op->reg_type, uval); |
| 1140 | |
| 1141 | state->last_reg_type = reg_op->reg_type; |
| 1142 | state->last_regno = uval; |
| 1143 | } |
| 1144 | break; |
| 1145 | |
| 1146 | case OP_REG_PAIR: |
| 1147 | { |
| 1148 | const struct mips_reg_pair_operand *pair_op; |
| 1149 | |
| 1150 | pair_op = (const struct mips_reg_pair_operand *) operand; |
| 1151 | print_reg (info, opcode, pair_op->reg_type, |
| 1152 | pair_op->reg1_map[uval]); |
| 1153 | infprintf (is, ","); |
| 1154 | print_reg (info, opcode, pair_op->reg_type, |
| 1155 | pair_op->reg2_map[uval]); |
| 1156 | } |
| 1157 | break; |
| 1158 | |
| 1159 | case OP_PCREL: |
| 1160 | { |
| 1161 | const struct mips_pcrel_operand *pcrel_op; |
| 1162 | |
| 1163 | pcrel_op = (const struct mips_pcrel_operand *) operand; |
| 1164 | info->target = mips_decode_pcrel_operand (pcrel_op, base_pc, uval); |
| 1165 | |
| 1166 | /* Preserve the ISA bit for the GDB disassembler, |
| 1167 | otherwise clear it. */ |
| 1168 | if (info->flavour != bfd_target_unknown_flavour) |
| 1169 | info->target &= -2; |
| 1170 | |
| 1171 | (*info->print_address_func) (info->target, info); |
| 1172 | } |
| 1173 | break; |
| 1174 | |
| 1175 | case OP_PERF_REG: |
| 1176 | infprintf (is, "%d", uval); |
| 1177 | break; |
| 1178 | |
| 1179 | case OP_ADDIUSP_INT: |
| 1180 | { |
| 1181 | int sval; |
| 1182 | |
| 1183 | sval = mips_signed_operand (operand, uval) * 4; |
| 1184 | if (sval >= -8 && sval < 8) |
| 1185 | sval ^= 0x400; |
| 1186 | infprintf (is, "%d", sval); |
| 1187 | break; |
| 1188 | } |
| 1189 | |
| 1190 | case OP_CLO_CLZ_DEST: |
| 1191 | { |
| 1192 | unsigned int reg1, reg2; |
| 1193 | |
| 1194 | reg1 = uval & 31; |
| 1195 | reg2 = uval >> 5; |
| 1196 | /* If one is zero use the other. */ |
| 1197 | if (reg1 == reg2 || reg2 == 0) |
| 1198 | infprintf (is, "%s", mips_gpr_names[reg1]); |
| 1199 | else if (reg1 == 0) |
| 1200 | infprintf (is, "%s", mips_gpr_names[reg2]); |
| 1201 | else |
| 1202 | /* Bogus, result depends on processor. */ |
| 1203 | infprintf (is, "%s or %s", mips_gpr_names[reg1], |
| 1204 | mips_gpr_names[reg2]); |
| 1205 | } |
| 1206 | break; |
| 1207 | |
| 1208 | case OP_LWM_SWM_LIST: |
| 1209 | if (operand->size == 2) |
| 1210 | { |
| 1211 | if (uval == 0) |
| 1212 | infprintf (is, "%s,%s", |
| 1213 | mips_gpr_names[16], |
| 1214 | mips_gpr_names[31]); |
| 1215 | else |
| 1216 | infprintf (is, "%s-%s,%s", |
| 1217 | mips_gpr_names[16], |
| 1218 | mips_gpr_names[16 + uval], |
| 1219 | mips_gpr_names[31]); |
| 1220 | } |
| 1221 | else |
| 1222 | { |
| 1223 | int s_reg_encode; |
| 1224 | |
| 1225 | s_reg_encode = uval & 0xf; |
| 1226 | if (s_reg_encode != 0) |
| 1227 | { |
| 1228 | if (s_reg_encode == 1) |
| 1229 | infprintf (is, "%s", mips_gpr_names[16]); |
| 1230 | else if (s_reg_encode < 9) |
| 1231 | infprintf (is, "%s-%s", |
| 1232 | mips_gpr_names[16], |
| 1233 | mips_gpr_names[15 + s_reg_encode]); |
| 1234 | else if (s_reg_encode == 9) |
| 1235 | infprintf (is, "%s-%s,%s", |
| 1236 | mips_gpr_names[16], |
| 1237 | mips_gpr_names[23], |
| 1238 | mips_gpr_names[30]); |
| 1239 | else |
| 1240 | infprintf (is, "UNKNOWN"); |
| 1241 | } |
| 1242 | |
| 1243 | if (uval & 0x10) /* For ra. */ |
| 1244 | { |
| 1245 | if (s_reg_encode == 0) |
| 1246 | infprintf (is, "%s", mips_gpr_names[31]); |
| 1247 | else |
| 1248 | infprintf (is, ",%s", mips_gpr_names[31]); |
| 1249 | } |
| 1250 | } |
| 1251 | break; |
| 1252 | |
| 1253 | case OP_ENTRY_EXIT_LIST: |
| 1254 | { |
| 1255 | const char *sep; |
| 1256 | unsigned int amask, smask; |
| 1257 | |
| 1258 | sep = ""; |
| 1259 | amask = (uval >> 3) & 7; |
| 1260 | if (amask > 0 && amask < 5) |
| 1261 | { |
| 1262 | infprintf (is, "%s", mips_gpr_names[4]); |
| 1263 | if (amask > 1) |
| 1264 | infprintf (is, "-%s", mips_gpr_names[amask + 3]); |
| 1265 | sep = ","; |
| 1266 | } |
| 1267 | |
| 1268 | smask = (uval >> 1) & 3; |
| 1269 | if (smask == 3) |
| 1270 | { |
| 1271 | infprintf (is, "%s??", sep); |
| 1272 | sep = ","; |
| 1273 | } |
| 1274 | else if (smask > 0) |
| 1275 | { |
| 1276 | infprintf (is, "%s%s", sep, mips_gpr_names[16]); |
| 1277 | if (smask > 1) |
| 1278 | infprintf (is, "-%s", mips_gpr_names[smask + 15]); |
| 1279 | sep = ","; |
| 1280 | } |
| 1281 | |
| 1282 | if (uval & 1) |
| 1283 | { |
| 1284 | infprintf (is, "%s%s", sep, mips_gpr_names[31]); |
| 1285 | sep = ","; |
| 1286 | } |
| 1287 | |
| 1288 | if (amask == 5 || amask == 6) |
| 1289 | { |
| 1290 | infprintf (is, "%s%s", sep, mips_fpr_names[0]); |
| 1291 | if (amask == 6) |
| 1292 | infprintf (is, "-%s", mips_fpr_names[1]); |
| 1293 | } |
| 1294 | } |
| 1295 | break; |
| 1296 | |
| 1297 | case OP_SAVE_RESTORE_LIST: |
| 1298 | /* Should be handled by the caller due to extend behavior. */ |
| 1299 | abort (); |
| 1300 | |
| 1301 | case OP_MDMX_IMM_REG: |
| 1302 | { |
| 1303 | unsigned int vsel; |
| 1304 | |
| 1305 | vsel = uval >> 5; |
| 1306 | uval &= 31; |
| 1307 | if ((vsel & 0x10) == 0) |
| 1308 | { |
| 1309 | int fmt; |
| 1310 | |
| 1311 | vsel &= 0x0f; |
| 1312 | for (fmt = 0; fmt < 3; fmt++, vsel >>= 1) |
| 1313 | if ((vsel & 1) == 0) |
| 1314 | break; |
| 1315 | print_reg (info, opcode, OP_REG_VEC, uval); |
| 1316 | infprintf (is, "[%d]", vsel >> 1); |
| 1317 | } |
| 1318 | else if ((vsel & 0x08) == 0) |
| 1319 | print_reg (info, opcode, OP_REG_VEC, uval); |
| 1320 | else |
| 1321 | infprintf (is, "0x%x", uval); |
| 1322 | } |
| 1323 | break; |
| 1324 | |
| 1325 | case OP_REPEAT_PREV_REG: |
| 1326 | print_reg (info, opcode, state->last_reg_type, state->last_regno); |
| 1327 | break; |
| 1328 | |
| 1329 | case OP_REPEAT_DEST_REG: |
| 1330 | /* Should always match OP_REPEAT_PREV_REG first. */ |
| 1331 | abort (); |
| 1332 | |
| 1333 | case OP_PC: |
| 1334 | infprintf (is, "$pc"); |
| 1335 | break; |
| 1336 | |
| 1337 | case OP_VU0_SUFFIX: |
| 1338 | case OP_VU0_MATCH_SUFFIX: |
| 1339 | print_vu0_channel (info, operand, uval); |
| 1340 | break; |
| 1341 | |
| 1342 | case OP_IMM_INDEX: |
| 1343 | infprintf (is, "[%d]", uval); |
| 1344 | break; |
| 1345 | |
| 1346 | case OP_REG_INDEX: |
| 1347 | infprintf (is, "["); |
| 1348 | print_reg (info, opcode, OP_REG_GP, uval); |
| 1349 | infprintf (is, "]"); |
| 1350 | break; |
| 1351 | } |
| 1352 | } |
| 1353 | |
| 1354 | /* Print the arguments for INSN, which is described by OPCODE. |
| 1355 | Use DECODE_OPERAND to get the encoding of each operand. Use BASE_PC |
| 1356 | as the base of OP_PCREL operands. */ |
| 1357 | |
| 1358 | static void |
| 1359 | print_insn_args (struct disassemble_info *info, |
| 1360 | const struct mips_opcode *opcode, |
| 1361 | const struct mips_operand *(*decode_operand) (const char *), |
| 1362 | unsigned int insn, bfd_vma base_pc) |
| 1363 | { |
| 1364 | const fprintf_ftype infprintf = info->fprintf_func; |
| 1365 | void *is = info->stream; |
| 1366 | struct mips_print_arg_state state; |
| 1367 | const struct mips_operand *operand; |
| 1368 | const char *s; |
| 1369 | |
| 1370 | init_print_arg_state (&state); |
| 1371 | for (s = opcode->args; *s; ++s) |
| 1372 | { |
| 1373 | switch (*s) |
| 1374 | { |
| 1375 | case ',': |
| 1376 | case '(': |
| 1377 | case ')': |
| 1378 | infprintf (is, "%c", *s); |
| 1379 | break; |
| 1380 | |
| 1381 | case '#': |
| 1382 | ++s; |
| 1383 | infprintf (is, "%c%c", *s, *s); |
| 1384 | break; |
| 1385 | |
| 1386 | default: |
| 1387 | operand = decode_operand (s); |
| 1388 | if (!operand) |
| 1389 | { |
| 1390 | /* xgettext:c-format */ |
| 1391 | infprintf (is, |
| 1392 | _("# internal error, undefined operand in `%s %s'"), |
| 1393 | opcode->name, opcode->args); |
| 1394 | return; |
| 1395 | } |
| 1396 | if (operand->type == OP_REG |
| 1397 | && s[1] == ',' |
| 1398 | && s[2] == 'H' |
| 1399 | && opcode->name[strlen (opcode->name) - 1] == '0') |
| 1400 | { |
| 1401 | /* Coprocessor register 0 with sel field (MT ASE). */ |
| 1402 | const struct mips_cp0sel_name *n; |
| 1403 | unsigned int reg, sel; |
| 1404 | |
| 1405 | reg = mips_extract_operand (operand, insn); |
| 1406 | s += 2; |
| 1407 | operand = decode_operand (s); |
| 1408 | sel = mips_extract_operand (operand, insn); |
| 1409 | |
| 1410 | /* CP0 register including 'sel' code for mftc0, to be |
| 1411 | printed textually if known. If not known, print both |
| 1412 | CP0 register name and sel numerically since CP0 register |
| 1413 | with sel 0 may have a name unrelated to register being |
| 1414 | printed. */ |
| 1415 | n = lookup_mips_cp0sel_name (mips_cp0sel_names, |
| 1416 | mips_cp0sel_names_len, |
| 1417 | reg, sel); |
| 1418 | if (n != NULL) |
| 1419 | infprintf (is, "%s", n->name); |
| 1420 | else |
| 1421 | infprintf (is, "$%d,%d", reg, sel); |
| 1422 | } |
| 1423 | else |
| 1424 | print_insn_arg (info, &state, opcode, operand, base_pc, |
| 1425 | mips_extract_operand (operand, insn)); |
| 1426 | if (*s == 'm' || *s == '+') |
| 1427 | ++s; |
| 1428 | break; |
| 1429 | } |
| 1430 | } |
| 1431 | } |
| 1432 | \f |
| 1433 | /* Print the mips instruction at address MEMADDR in debugged memory, |
| 1434 | on using INFO. Returns length of the instruction, in bytes, which is |
| 1435 | always INSNLEN. BIGENDIAN must be 1 if this is big-endian code, 0 if |
| 1436 | this is little-endian code. */ |
| 1437 | |
| 1438 | static int |
| 1439 | print_insn_mips (bfd_vma memaddr, |
| 1440 | int word, |
| 1441 | struct disassemble_info *info) |
| 1442 | { |
| 1443 | #define GET_OP(insn, field) \ |
| 1444 | (((insn) >> OP_SH_##field) & OP_MASK_##field) |
| 1445 | static const struct mips_opcode *mips_hash[OP_MASK_OP + 1]; |
| 1446 | const fprintf_ftype infprintf = info->fprintf_func; |
| 1447 | const struct mips_opcode *op; |
| 1448 | static bfd_boolean init = 0; |
| 1449 | void *is = info->stream; |
| 1450 | |
| 1451 | /* Build a hash table to shorten the search time. */ |
| 1452 | if (! init) |
| 1453 | { |
| 1454 | unsigned int i; |
| 1455 | |
| 1456 | for (i = 0; i <= OP_MASK_OP; i++) |
| 1457 | { |
| 1458 | for (op = mips_opcodes; op < &mips_opcodes[NUMOPCODES]; op++) |
| 1459 | { |
| 1460 | if (op->pinfo == INSN_MACRO |
| 1461 | || (no_aliases && (op->pinfo2 & INSN2_ALIAS))) |
| 1462 | continue; |
| 1463 | if (i == GET_OP (op->match, OP)) |
| 1464 | { |
| 1465 | mips_hash[i] = op; |
| 1466 | break; |
| 1467 | } |
| 1468 | } |
| 1469 | } |
| 1470 | |
| 1471 | init = 1; |
| 1472 | } |
| 1473 | |
| 1474 | info->bytes_per_chunk = INSNLEN; |
| 1475 | info->display_endian = info->endian; |
| 1476 | info->insn_info_valid = 1; |
| 1477 | info->branch_delay_insns = 0; |
| 1478 | info->data_size = 0; |
| 1479 | info->insn_type = dis_nonbranch; |
| 1480 | info->target = 0; |
| 1481 | info->target2 = 0; |
| 1482 | |
| 1483 | op = mips_hash[GET_OP (word, OP)]; |
| 1484 | if (op != NULL) |
| 1485 | { |
| 1486 | for (; op < &mips_opcodes[NUMOPCODES]; op++) |
| 1487 | { |
| 1488 | if (op->pinfo != INSN_MACRO |
| 1489 | && !(no_aliases && (op->pinfo2 & INSN2_ALIAS)) |
| 1490 | && (word & op->mask) == op->match) |
| 1491 | { |
| 1492 | /* We always allow to disassemble the jalx instruction. */ |
| 1493 | if (!opcode_is_member (op, mips_isa, mips_ase, mips_processor) |
| 1494 | && strcmp (op->name, "jalx")) |
| 1495 | continue; |
| 1496 | |
| 1497 | /* Figure out instruction type and branch delay information. */ |
| 1498 | if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0) |
| 1499 | { |
| 1500 | if ((op->pinfo & (INSN_WRITE_GPR_31 | INSN_WRITE_1)) != 0) |
| 1501 | info->insn_type = dis_jsr; |
| 1502 | else |
| 1503 | info->insn_type = dis_branch; |
| 1504 | info->branch_delay_insns = 1; |
| 1505 | } |
| 1506 | else if ((op->pinfo & (INSN_COND_BRANCH_DELAY |
| 1507 | | INSN_COND_BRANCH_LIKELY)) != 0) |
| 1508 | { |
| 1509 | if ((op->pinfo & INSN_WRITE_GPR_31) != 0) |
| 1510 | info->insn_type = dis_condjsr; |
| 1511 | else |
| 1512 | info->insn_type = dis_condbranch; |
| 1513 | info->branch_delay_insns = 1; |
| 1514 | } |
| 1515 | else if ((op->pinfo & (INSN_STORE_MEMORY |
| 1516 | | INSN_LOAD_MEMORY)) != 0) |
| 1517 | info->insn_type = dis_dref; |
| 1518 | |
| 1519 | infprintf (is, "%s", op->name); |
| 1520 | if (op->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX) |
| 1521 | { |
| 1522 | unsigned int uval; |
| 1523 | |
| 1524 | infprintf (is, "."); |
| 1525 | uval = mips_extract_operand (&mips_vu0_channel_mask, word); |
| 1526 | print_vu0_channel (info, &mips_vu0_channel_mask, uval); |
| 1527 | } |
| 1528 | |
| 1529 | if (op->args[0]) |
| 1530 | { |
| 1531 | infprintf (is, "\t"); |
| 1532 | print_insn_args (info, op, decode_mips_operand, word, |
| 1533 | memaddr + 4); |
| 1534 | } |
| 1535 | |
| 1536 | return INSNLEN; |
| 1537 | } |
| 1538 | } |
| 1539 | } |
| 1540 | #undef GET_OP |
| 1541 | |
| 1542 | /* Handle undefined instructions. */ |
| 1543 | info->insn_type = dis_noninsn; |
| 1544 | infprintf (is, "0x%x", word); |
| 1545 | return INSNLEN; |
| 1546 | } |
| 1547 | \f |
| 1548 | /* Disassemble an operand for a mips16 instruction. */ |
| 1549 | |
| 1550 | static void |
| 1551 | print_mips16_insn_arg (struct disassemble_info *info, |
| 1552 | struct mips_print_arg_state *state, |
| 1553 | const struct mips_opcode *opcode, |
| 1554 | char type, bfd_vma memaddr, |
| 1555 | unsigned insn, bfd_boolean use_extend, |
| 1556 | unsigned extend, bfd_boolean is_offset) |
| 1557 | { |
| 1558 | const fprintf_ftype infprintf = info->fprintf_func; |
| 1559 | void *is = info->stream; |
| 1560 | const struct mips_operand *operand, *ext_operand; |
| 1561 | unsigned int uval; |
| 1562 | bfd_vma baseaddr; |
| 1563 | |
| 1564 | if (!use_extend) |
| 1565 | extend = 0; |
| 1566 | |
| 1567 | switch (type) |
| 1568 | { |
| 1569 | case ',': |
| 1570 | case '(': |
| 1571 | case ')': |
| 1572 | infprintf (is, "%c", type); |
| 1573 | break; |
| 1574 | |
| 1575 | default: |
| 1576 | operand = decode_mips16_operand (type, FALSE); |
| 1577 | if (!operand) |
| 1578 | { |
| 1579 | /* xgettext:c-format */ |
| 1580 | infprintf (is, _("# internal error, undefined operand in `%s %s'"), |
| 1581 | opcode->name, opcode->args); |
| 1582 | return; |
| 1583 | } |
| 1584 | |
| 1585 | if (operand->type == OP_SAVE_RESTORE_LIST) |
| 1586 | { |
| 1587 | /* Handle this case here because of the complex interation |
| 1588 | with the EXTEND opcode. */ |
| 1589 | unsigned int amask, nargs, nstatics, nsreg, smask, frame_size, i, j; |
| 1590 | const char *sep; |
| 1591 | |
| 1592 | amask = extend & 0xf; |
| 1593 | if (amask == MIPS16_ALL_ARGS) |
| 1594 | { |
| 1595 | nargs = 4; |
| 1596 | nstatics = 0; |
| 1597 | } |
| 1598 | else if (amask == MIPS16_ALL_STATICS) |
| 1599 | { |
| 1600 | nargs = 0; |
| 1601 | nstatics = 4; |
| 1602 | } |
| 1603 | else |
| 1604 | { |
| 1605 | nargs = amask >> 2; |
| 1606 | nstatics = amask & 3; |
| 1607 | } |
| 1608 | |
| 1609 | sep = ""; |
| 1610 | if (nargs > 0) |
| 1611 | { |
| 1612 | infprintf (is, "%s", mips_gpr_names[4]); |
| 1613 | if (nargs > 1) |
| 1614 | infprintf (is, "-%s", mips_gpr_names[4 + nargs - 1]); |
| 1615 | sep = ","; |
| 1616 | } |
| 1617 | |
| 1618 | frame_size = ((extend & 0xf0) | (insn & 0x0f)) * 8; |
| 1619 | if (frame_size == 0 && !use_extend) |
| 1620 | frame_size = 128; |
| 1621 | infprintf (is, "%s%d", sep, frame_size); |
| 1622 | |
| 1623 | if (insn & 0x40) /* $ra */ |
| 1624 | infprintf (is, ",%s", mips_gpr_names[31]); |
| 1625 | |
| 1626 | nsreg = (extend >> 8) & 0x7; |
| 1627 | smask = 0; |
| 1628 | if (insn & 0x20) /* $s0 */ |
| 1629 | smask |= 1 << 0; |
| 1630 | if (insn & 0x10) /* $s1 */ |
| 1631 | smask |= 1 << 1; |
| 1632 | if (nsreg > 0) /* $s2-$s8 */ |
| 1633 | smask |= ((1 << nsreg) - 1) << 2; |
| 1634 | |
| 1635 | for (i = 0; i < 9; i++) |
| 1636 | if (smask & (1 << i)) |
| 1637 | { |
| 1638 | infprintf (is, ",%s", mips_gpr_names[i == 8 ? 30 : (16 + i)]); |
| 1639 | /* Skip over string of set bits. */ |
| 1640 | for (j = i; smask & (2 << j); j++) |
| 1641 | continue; |
| 1642 | if (j > i) |
| 1643 | infprintf (is, "-%s", mips_gpr_names[j == 8 ? 30 : (16 + j)]); |
| 1644 | i = j + 1; |
| 1645 | } |
| 1646 | /* Statics $ax - $a3. */ |
| 1647 | if (nstatics == 1) |
| 1648 | infprintf (is, ",%s", mips_gpr_names[7]); |
| 1649 | else if (nstatics > 0) |
| 1650 | infprintf (is, ",%s-%s", |
| 1651 | mips_gpr_names[7 - nstatics + 1], |
| 1652 | mips_gpr_names[7]); |
| 1653 | break; |
| 1654 | } |
| 1655 | |
| 1656 | if (is_offset && operand->type == OP_INT) |
| 1657 | { |
| 1658 | const struct mips_int_operand *int_op; |
| 1659 | |
| 1660 | int_op = (const struct mips_int_operand *) operand; |
| 1661 | info->insn_type = dis_dref; |
| 1662 | info->data_size = 1 << int_op->shift; |
| 1663 | } |
| 1664 | |
| 1665 | if (operand->size == 26) |
| 1666 | /* In this case INSN is the first two bytes of the instruction |
| 1667 | and EXTEND is the second two bytes. */ |
| 1668 | uval = ((insn & 0x1f) << 21) | ((insn & 0x3e0) << 11) | extend; |
| 1669 | else |
| 1670 | { |
| 1671 | /* Calculate the full field value. */ |
| 1672 | uval = mips_extract_operand (operand, insn); |
| 1673 | if (use_extend) |
| 1674 | { |
| 1675 | ext_operand = decode_mips16_operand (type, TRUE); |
| 1676 | if (ext_operand != operand) |
| 1677 | { |
| 1678 | operand = ext_operand; |
| 1679 | if (operand->size == 16) |
| 1680 | uval |= ((extend & 0x1f) << 11) | (extend & 0x7e0); |
| 1681 | else if (operand->size == 15) |
| 1682 | uval |= ((extend & 0xf) << 11) | (extend & 0x7f0); |
| 1683 | else |
| 1684 | uval = ((extend >> 6) & 0x1f) | (extend & 0x20); |
| 1685 | } |
| 1686 | } |
| 1687 | } |
| 1688 | |
| 1689 | baseaddr = memaddr + 2; |
| 1690 | if (operand->type == OP_PCREL) |
| 1691 | { |
| 1692 | const struct mips_pcrel_operand *pcrel_op; |
| 1693 | |
| 1694 | pcrel_op = (const struct mips_pcrel_operand *) operand; |
| 1695 | if (!pcrel_op->include_isa_bit && use_extend) |
| 1696 | baseaddr = memaddr - 2; |
| 1697 | else if (!pcrel_op->include_isa_bit) |
| 1698 | { |
| 1699 | bfd_byte buffer[2]; |
| 1700 | |
| 1701 | /* If this instruction is in the delay slot of a JR |
| 1702 | instruction, the base address is the address of the |
| 1703 | JR instruction. If it is in the delay slot of a JALR |
| 1704 | instruction, the base address is the address of the |
| 1705 | JALR instruction. This test is unreliable: we have |
| 1706 | no way of knowing whether the previous word is |
| 1707 | instruction or data. */ |
| 1708 | if (info->read_memory_func (memaddr - 4, buffer, 2, info) == 0 |
| 1709 | && (((info->endian == BFD_ENDIAN_BIG |
| 1710 | ? bfd_getb16 (buffer) |
| 1711 | : bfd_getl16 (buffer)) |
| 1712 | & 0xf800) == 0x1800)) |
| 1713 | baseaddr = memaddr - 4; |
| 1714 | else if (info->read_memory_func (memaddr - 2, buffer, 2, |
| 1715 | info) == 0 |
| 1716 | && (((info->endian == BFD_ENDIAN_BIG |
| 1717 | ? bfd_getb16 (buffer) |
| 1718 | : bfd_getl16 (buffer)) |
| 1719 | & 0xf81f) == 0xe800)) |
| 1720 | baseaddr = memaddr - 2; |
| 1721 | else |
| 1722 | baseaddr = memaddr; |
| 1723 | } |
| 1724 | } |
| 1725 | |
| 1726 | print_insn_arg (info, state, opcode, operand, baseaddr + 1, uval); |
| 1727 | break; |
| 1728 | } |
| 1729 | } |
| 1730 | |
| 1731 | |
| 1732 | /* Check if the given address is the last word of a MIPS16 PLT entry. |
| 1733 | This word is data and depending on the value it may interfere with |
| 1734 | disassembly of further PLT entries. We make use of the fact PLT |
| 1735 | symbols are marked BSF_SYNTHETIC. */ |
| 1736 | static bfd_boolean |
| 1737 | is_mips16_plt_tail (struct disassemble_info *info, bfd_vma addr) |
| 1738 | { |
| 1739 | if (info->symbols |
| 1740 | && info->symbols[0] |
| 1741 | && (info->symbols[0]->flags & BSF_SYNTHETIC) |
| 1742 | && addr == bfd_asymbol_value (info->symbols[0]) + 12) |
| 1743 | return TRUE; |
| 1744 | |
| 1745 | return FALSE; |
| 1746 | } |
| 1747 | |
| 1748 | /* Disassemble mips16 instructions. */ |
| 1749 | |
| 1750 | static int |
| 1751 | print_insn_mips16 (bfd_vma memaddr, struct disassemble_info *info) |
| 1752 | { |
| 1753 | const fprintf_ftype infprintf = info->fprintf_func; |
| 1754 | int status; |
| 1755 | bfd_byte buffer[4]; |
| 1756 | int length; |
| 1757 | int insn; |
| 1758 | bfd_boolean use_extend; |
| 1759 | int extend = 0; |
| 1760 | const struct mips_opcode *op, *opend; |
| 1761 | struct mips_print_arg_state state; |
| 1762 | void *is = info->stream; |
| 1763 | |
| 1764 | info->bytes_per_chunk = 2; |
| 1765 | info->display_endian = info->endian; |
| 1766 | info->insn_info_valid = 1; |
| 1767 | info->branch_delay_insns = 0; |
| 1768 | info->data_size = 0; |
| 1769 | info->target = 0; |
| 1770 | info->target2 = 0; |
| 1771 | |
| 1772 | #define GET_OP(insn, field) \ |
| 1773 | (((insn) >> MIPS16OP_SH_##field) & MIPS16OP_MASK_##field) |
| 1774 | /* Decode PLT entry's GOT slot address word. */ |
| 1775 | if (is_mips16_plt_tail (info, memaddr)) |
| 1776 | { |
| 1777 | info->insn_type = dis_noninsn; |
| 1778 | status = (*info->read_memory_func) (memaddr, buffer, 4, info); |
| 1779 | if (status == 0) |
| 1780 | { |
| 1781 | unsigned int gotslot; |
| 1782 | |
| 1783 | if (info->endian == BFD_ENDIAN_BIG) |
| 1784 | gotslot = bfd_getb32 (buffer); |
| 1785 | else |
| 1786 | gotslot = bfd_getl32 (buffer); |
| 1787 | infprintf (is, ".word\t0x%x", gotslot); |
| 1788 | |
| 1789 | return 4; |
| 1790 | } |
| 1791 | } |
| 1792 | else |
| 1793 | { |
| 1794 | info->insn_type = dis_nonbranch; |
| 1795 | status = (*info->read_memory_func) (memaddr, buffer, 2, info); |
| 1796 | } |
| 1797 | if (status != 0) |
| 1798 | { |
| 1799 | (*info->memory_error_func) (status, memaddr, info); |
| 1800 | return -1; |
| 1801 | } |
| 1802 | |
| 1803 | length = 2; |
| 1804 | |
| 1805 | if (info->endian == BFD_ENDIAN_BIG) |
| 1806 | insn = bfd_getb16 (buffer); |
| 1807 | else |
| 1808 | insn = bfd_getl16 (buffer); |
| 1809 | |
| 1810 | /* Handle the extend opcode specially. */ |
| 1811 | use_extend = FALSE; |
| 1812 | if ((insn & 0xf800) == 0xf000) |
| 1813 | { |
| 1814 | use_extend = TRUE; |
| 1815 | extend = insn & 0x7ff; |
| 1816 | |
| 1817 | memaddr += 2; |
| 1818 | |
| 1819 | status = (*info->read_memory_func) (memaddr, buffer, 2, info); |
| 1820 | if (status != 0) |
| 1821 | { |
| 1822 | infprintf (is, "extend 0x%x", (unsigned int) extend); |
| 1823 | (*info->memory_error_func) (status, memaddr, info); |
| 1824 | return -1; |
| 1825 | } |
| 1826 | |
| 1827 | if (info->endian == BFD_ENDIAN_BIG) |
| 1828 | insn = bfd_getb16 (buffer); |
| 1829 | else |
| 1830 | insn = bfd_getl16 (buffer); |
| 1831 | |
| 1832 | /* Check for an extend opcode followed by an extend opcode. */ |
| 1833 | if ((insn & 0xf800) == 0xf000) |
| 1834 | { |
| 1835 | infprintf (is, "extend 0x%x", (unsigned int) extend); |
| 1836 | info->insn_type = dis_noninsn; |
| 1837 | return length; |
| 1838 | } |
| 1839 | |
| 1840 | length += 2; |
| 1841 | } |
| 1842 | |
| 1843 | /* FIXME: Should probably use a hash table on the major opcode here. */ |
| 1844 | |
| 1845 | opend = mips16_opcodes + bfd_mips16_num_opcodes; |
| 1846 | for (op = mips16_opcodes; op < opend; op++) |
| 1847 | { |
| 1848 | if (op->pinfo != INSN_MACRO |
| 1849 | && !(no_aliases && (op->pinfo2 & INSN2_ALIAS)) |
| 1850 | && (insn & op->mask) == op->match) |
| 1851 | { |
| 1852 | const char *s; |
| 1853 | |
| 1854 | if (op->args[0] == 'a' || op->args[0] == 'i') |
| 1855 | { |
| 1856 | if (use_extend) |
| 1857 | { |
| 1858 | infprintf (is, "extend 0x%x", (unsigned int) extend); |
| 1859 | info->insn_type = dis_noninsn; |
| 1860 | return length - 2; |
| 1861 | } |
| 1862 | |
| 1863 | use_extend = FALSE; |
| 1864 | |
| 1865 | memaddr += 2; |
| 1866 | |
| 1867 | status = (*info->read_memory_func) (memaddr, buffer, 2, |
| 1868 | info); |
| 1869 | if (status == 0) |
| 1870 | { |
| 1871 | use_extend = TRUE; |
| 1872 | if (info->endian == BFD_ENDIAN_BIG) |
| 1873 | extend = bfd_getb16 (buffer); |
| 1874 | else |
| 1875 | extend = bfd_getl16 (buffer); |
| 1876 | length += 2; |
| 1877 | } |
| 1878 | } |
| 1879 | |
| 1880 | infprintf (is, "%s", op->name); |
| 1881 | if (op->args[0] != '\0') |
| 1882 | infprintf (is, "\t"); |
| 1883 | |
| 1884 | init_print_arg_state (&state); |
| 1885 | for (s = op->args; *s != '\0'; s++) |
| 1886 | { |
| 1887 | if (*s == ',' |
| 1888 | && s[1] == 'w' |
| 1889 | && GET_OP (insn, RX) == GET_OP (insn, RY)) |
| 1890 | { |
| 1891 | /* Skip the register and the comma. */ |
| 1892 | ++s; |
| 1893 | continue; |
| 1894 | } |
| 1895 | if (*s == ',' |
| 1896 | && s[1] == 'v' |
| 1897 | && GET_OP (insn, RZ) == GET_OP (insn, RX)) |
| 1898 | { |
| 1899 | /* Skip the register and the comma. */ |
| 1900 | ++s; |
| 1901 | continue; |
| 1902 | } |
| 1903 | print_mips16_insn_arg (info, &state, op, *s, memaddr, insn, |
| 1904 | use_extend, extend, s[1] == '('); |
| 1905 | } |
| 1906 | |
| 1907 | /* Figure out branch instruction type and delay slot information. */ |
| 1908 | if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0) |
| 1909 | info->branch_delay_insns = 1; |
| 1910 | if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0 |
| 1911 | || (op->pinfo2 & INSN2_UNCOND_BRANCH) != 0) |
| 1912 | { |
| 1913 | if ((op->pinfo & INSN_WRITE_GPR_31) != 0) |
| 1914 | info->insn_type = dis_jsr; |
| 1915 | else |
| 1916 | info->insn_type = dis_branch; |
| 1917 | } |
| 1918 | else if ((op->pinfo2 & INSN2_COND_BRANCH) != 0) |
| 1919 | info->insn_type = dis_condbranch; |
| 1920 | |
| 1921 | return length; |
| 1922 | } |
| 1923 | } |
| 1924 | #undef GET_OP |
| 1925 | |
| 1926 | if (use_extend) |
| 1927 | infprintf (is, "0x%x", extend | 0xf000); |
| 1928 | infprintf (is, "0x%x", insn); |
| 1929 | info->insn_type = dis_noninsn; |
| 1930 | |
| 1931 | return length; |
| 1932 | } |
| 1933 | |
| 1934 | /* Disassemble microMIPS instructions. */ |
| 1935 | |
| 1936 | static int |
| 1937 | print_insn_micromips (bfd_vma memaddr, struct disassemble_info *info) |
| 1938 | { |
| 1939 | const fprintf_ftype infprintf = info->fprintf_func; |
| 1940 | const struct mips_opcode *op, *opend; |
| 1941 | void *is = info->stream; |
| 1942 | bfd_byte buffer[2]; |
| 1943 | unsigned int higher; |
| 1944 | unsigned int length; |
| 1945 | int status; |
| 1946 | unsigned int insn; |
| 1947 | |
| 1948 | info->bytes_per_chunk = 2; |
| 1949 | info->display_endian = info->endian; |
| 1950 | info->insn_info_valid = 1; |
| 1951 | info->branch_delay_insns = 0; |
| 1952 | info->data_size = 0; |
| 1953 | info->insn_type = dis_nonbranch; |
| 1954 | info->target = 0; |
| 1955 | info->target2 = 0; |
| 1956 | |
| 1957 | status = (*info->read_memory_func) (memaddr, buffer, 2, info); |
| 1958 | if (status != 0) |
| 1959 | { |
| 1960 | (*info->memory_error_func) (status, memaddr, info); |
| 1961 | return -1; |
| 1962 | } |
| 1963 | |
| 1964 | length = 2; |
| 1965 | |
| 1966 | if (info->endian == BFD_ENDIAN_BIG) |
| 1967 | insn = bfd_getb16 (buffer); |
| 1968 | else |
| 1969 | insn = bfd_getl16 (buffer); |
| 1970 | |
| 1971 | if ((insn & 0xfc00) == 0x7c00) |
| 1972 | { |
| 1973 | /* This is a 48-bit microMIPS instruction. */ |
| 1974 | higher = insn; |
| 1975 | |
| 1976 | status = (*info->read_memory_func) (memaddr + 2, buffer, 2, info); |
| 1977 | if (status != 0) |
| 1978 | { |
| 1979 | infprintf (is, "micromips 0x%x", higher); |
| 1980 | (*info->memory_error_func) (status, memaddr + 2, info); |
| 1981 | return -1; |
| 1982 | } |
| 1983 | if (info->endian == BFD_ENDIAN_BIG) |
| 1984 | insn = bfd_getb16 (buffer); |
| 1985 | else |
| 1986 | insn = bfd_getl16 (buffer); |
| 1987 | higher = (higher << 16) | insn; |
| 1988 | |
| 1989 | status = (*info->read_memory_func) (memaddr + 4, buffer, 2, info); |
| 1990 | if (status != 0) |
| 1991 | { |
| 1992 | infprintf (is, "micromips 0x%x", higher); |
| 1993 | (*info->memory_error_func) (status, memaddr + 4, info); |
| 1994 | return -1; |
| 1995 | } |
| 1996 | if (info->endian == BFD_ENDIAN_BIG) |
| 1997 | insn = bfd_getb16 (buffer); |
| 1998 | else |
| 1999 | insn = bfd_getl16 (buffer); |
| 2000 | infprintf (is, "0x%x%04x (48-bit insn)", higher, insn); |
| 2001 | |
| 2002 | info->insn_type = dis_noninsn; |
| 2003 | return 6; |
| 2004 | } |
| 2005 | else if ((insn & 0x1c00) == 0x0000 || (insn & 0x1000) == 0x1000) |
| 2006 | { |
| 2007 | /* This is a 32-bit microMIPS instruction. */ |
| 2008 | higher = insn; |
| 2009 | |
| 2010 | status = (*info->read_memory_func) (memaddr + 2, buffer, 2, info); |
| 2011 | if (status != 0) |
| 2012 | { |
| 2013 | infprintf (is, "micromips 0x%x", higher); |
| 2014 | (*info->memory_error_func) (status, memaddr + 2, info); |
| 2015 | return -1; |
| 2016 | } |
| 2017 | |
| 2018 | if (info->endian == BFD_ENDIAN_BIG) |
| 2019 | insn = bfd_getb16 (buffer); |
| 2020 | else |
| 2021 | insn = bfd_getl16 (buffer); |
| 2022 | |
| 2023 | insn = insn | (higher << 16); |
| 2024 | |
| 2025 | length += 2; |
| 2026 | } |
| 2027 | |
| 2028 | /* FIXME: Should probably use a hash table on the major opcode here. */ |
| 2029 | |
| 2030 | opend = micromips_opcodes + bfd_micromips_num_opcodes; |
| 2031 | for (op = micromips_opcodes; op < opend; op++) |
| 2032 | { |
| 2033 | if (op->pinfo != INSN_MACRO |
| 2034 | && !(no_aliases && (op->pinfo2 & INSN2_ALIAS)) |
| 2035 | && (insn & op->mask) == op->match |
| 2036 | && ((length == 2 && (op->mask & 0xffff0000) == 0) |
| 2037 | || (length == 4 && (op->mask & 0xffff0000) != 0))) |
| 2038 | { |
| 2039 | infprintf (is, "%s", op->name); |
| 2040 | |
| 2041 | if (op->args[0]) |
| 2042 | { |
| 2043 | infprintf (is, "\t"); |
| 2044 | print_insn_args (info, op, decode_micromips_operand, insn, |
| 2045 | memaddr + length + 1); |
| 2046 | } |
| 2047 | |
| 2048 | /* Figure out instruction type and branch delay information. */ |
| 2049 | if ((op->pinfo |
| 2050 | & (INSN_UNCOND_BRANCH_DELAY | INSN_COND_BRANCH_DELAY)) != 0) |
| 2051 | info->branch_delay_insns = 1; |
| 2052 | if (((op->pinfo & INSN_UNCOND_BRANCH_DELAY) |
| 2053 | | (op->pinfo2 & INSN2_UNCOND_BRANCH)) != 0) |
| 2054 | { |
| 2055 | if ((op->pinfo & (INSN_WRITE_GPR_31 | INSN_WRITE_1)) != 0) |
| 2056 | info->insn_type = dis_jsr; |
| 2057 | else |
| 2058 | info->insn_type = dis_branch; |
| 2059 | } |
| 2060 | else if (((op->pinfo & INSN_COND_BRANCH_DELAY) |
| 2061 | | (op->pinfo2 & INSN2_COND_BRANCH)) != 0) |
| 2062 | { |
| 2063 | if ((op->pinfo & INSN_WRITE_GPR_31) != 0) |
| 2064 | info->insn_type = dis_condjsr; |
| 2065 | else |
| 2066 | info->insn_type = dis_condbranch; |
| 2067 | } |
| 2068 | else if ((op->pinfo |
| 2069 | & (INSN_STORE_MEMORY | INSN_LOAD_MEMORY)) != 0) |
| 2070 | info->insn_type = dis_dref; |
| 2071 | |
| 2072 | return length; |
| 2073 | } |
| 2074 | } |
| 2075 | |
| 2076 | infprintf (is, "0x%x", insn); |
| 2077 | info->insn_type = dis_noninsn; |
| 2078 | |
| 2079 | return length; |
| 2080 | } |
| 2081 | |
| 2082 | /* Return 1 if a symbol associated with the location being disassembled |
| 2083 | indicates a compressed (MIPS16 or microMIPS) mode. We iterate over |
| 2084 | all the symbols at the address being considered assuming if at least |
| 2085 | one of them indicates code compression, then such code has been |
| 2086 | genuinely produced here (other symbols could have been derived from |
| 2087 | function symbols defined elsewhere or could define data). Otherwise, |
| 2088 | return 0. */ |
| 2089 | |
| 2090 | static bfd_boolean |
| 2091 | is_compressed_mode_p (struct disassemble_info *info) |
| 2092 | { |
| 2093 | int i; |
| 2094 | int l; |
| 2095 | |
| 2096 | for (i = info->symtab_pos, l = i + info->num_symbols; i < l; i++) |
| 2097 | if (((info->symtab[i])->flags & BSF_SYNTHETIC) != 0 |
| 2098 | && ((!micromips_ase |
| 2099 | && ELF_ST_IS_MIPS16 ((*info->symbols)->udata.i)) |
| 2100 | || (micromips_ase |
| 2101 | && ELF_ST_IS_MICROMIPS ((*info->symbols)->udata.i)))) |
| 2102 | return 1; |
| 2103 | else if (bfd_asymbol_flavour (info->symtab[i]) == bfd_target_elf_flavour |
| 2104 | && info->symtab[i]->section == info->section) |
| 2105 | { |
| 2106 | elf_symbol_type *symbol = (elf_symbol_type *) info->symtab[i]; |
| 2107 | if ((!micromips_ase |
| 2108 | && ELF_ST_IS_MIPS16 (symbol->internal_elf_sym.st_other)) |
| 2109 | || (micromips_ase |
| 2110 | && ELF_ST_IS_MICROMIPS (symbol->internal_elf_sym.st_other))) |
| 2111 | return 1; |
| 2112 | } |
| 2113 | |
| 2114 | return 0; |
| 2115 | } |
| 2116 | |
| 2117 | /* In an environment where we do not know the symbol type of the |
| 2118 | instruction we are forced to assume that the low order bit of the |
| 2119 | instructions' address may mark it as a mips16 instruction. If we |
| 2120 | are single stepping, or the pc is within the disassembled function, |
| 2121 | this works. Otherwise, we need a clue. Sometimes. */ |
| 2122 | |
| 2123 | static int |
| 2124 | _print_insn_mips (bfd_vma memaddr, |
| 2125 | struct disassemble_info *info, |
| 2126 | enum bfd_endian endianness) |
| 2127 | { |
| 2128 | int (*print_insn_compr) (bfd_vma, struct disassemble_info *); |
| 2129 | bfd_byte buffer[INSNLEN]; |
| 2130 | int status; |
| 2131 | |
| 2132 | set_default_mips_dis_options (info); |
| 2133 | parse_mips_dis_options (info->disassembler_options); |
| 2134 | |
| 2135 | if (info->mach == bfd_mach_mips16) |
| 2136 | return print_insn_mips16 (memaddr, info); |
| 2137 | if (info->mach == bfd_mach_mips_micromips) |
| 2138 | return print_insn_micromips (memaddr, info); |
| 2139 | |
| 2140 | print_insn_compr = !micromips_ase ? print_insn_mips16 : print_insn_micromips; |
| 2141 | |
| 2142 | #if 1 |
| 2143 | /* FIXME: If odd address, this is CLEARLY a compressed instruction. */ |
| 2144 | /* Only a few tools will work this way. */ |
| 2145 | if (memaddr & 0x01) |
| 2146 | return print_insn_compr (memaddr, info); |
| 2147 | #endif |
| 2148 | |
| 2149 | #if SYMTAB_AVAILABLE |
| 2150 | if (is_compressed_mode_p (info)) |
| 2151 | return print_insn_compr (memaddr, info); |
| 2152 | #endif |
| 2153 | |
| 2154 | status = (*info->read_memory_func) (memaddr, buffer, INSNLEN, info); |
| 2155 | if (status == 0) |
| 2156 | { |
| 2157 | int insn; |
| 2158 | |
| 2159 | if (endianness == BFD_ENDIAN_BIG) |
| 2160 | insn = bfd_getb32 (buffer); |
| 2161 | else |
| 2162 | insn = bfd_getl32 (buffer); |
| 2163 | |
| 2164 | return print_insn_mips (memaddr, insn, info); |
| 2165 | } |
| 2166 | else |
| 2167 | { |
| 2168 | (*info->memory_error_func) (status, memaddr, info); |
| 2169 | return -1; |
| 2170 | } |
| 2171 | } |
| 2172 | |
| 2173 | int |
| 2174 | print_insn_big_mips (bfd_vma memaddr, struct disassemble_info *info) |
| 2175 | { |
| 2176 | return _print_insn_mips (memaddr, info, BFD_ENDIAN_BIG); |
| 2177 | } |
| 2178 | |
| 2179 | int |
| 2180 | print_insn_little_mips (bfd_vma memaddr, struct disassemble_info *info) |
| 2181 | { |
| 2182 | return _print_insn_mips (memaddr, info, BFD_ENDIAN_LITTLE); |
| 2183 | } |
| 2184 | \f |
| 2185 | void |
| 2186 | print_mips_disassembler_options (FILE *stream) |
| 2187 | { |
| 2188 | unsigned int i; |
| 2189 | |
| 2190 | fprintf (stream, _("\n\ |
| 2191 | The following MIPS specific disassembler options are supported for use\n\ |
| 2192 | with the -M switch (multiple options should be separated by commas):\n")); |
| 2193 | |
| 2194 | fprintf (stream, _("\n\ |
| 2195 | msa Recognize MSA instructions.\n")); |
| 2196 | |
| 2197 | fprintf (stream, _("\n\ |
| 2198 | virt Recognize the virtualization ASE instructions.\n")); |
| 2199 | |
| 2200 | fprintf (stream, _("\n\ |
| 2201 | gpr-names=ABI Print GPR names according to specified ABI.\n\ |
| 2202 | Default: based on binary being disassembled.\n")); |
| 2203 | |
| 2204 | fprintf (stream, _("\n\ |
| 2205 | fpr-names=ABI Print FPR names according to specified ABI.\n\ |
| 2206 | Default: numeric.\n")); |
| 2207 | |
| 2208 | fprintf (stream, _("\n\ |
| 2209 | cp0-names=ARCH Print CP0 register names according to\n\ |
| 2210 | specified architecture.\n\ |
| 2211 | Default: based on binary being disassembled.\n")); |
| 2212 | |
| 2213 | fprintf (stream, _("\n\ |
| 2214 | hwr-names=ARCH Print HWR names according to specified \n\ |
| 2215 | architecture.\n\ |
| 2216 | Default: based on binary being disassembled.\n")); |
| 2217 | |
| 2218 | fprintf (stream, _("\n\ |
| 2219 | reg-names=ABI Print GPR and FPR names according to\n\ |
| 2220 | specified ABI.\n")); |
| 2221 | |
| 2222 | fprintf (stream, _("\n\ |
| 2223 | reg-names=ARCH Print CP0 register and HWR names according to\n\ |
| 2224 | specified architecture.\n")); |
| 2225 | |
| 2226 | fprintf (stream, _("\n\ |
| 2227 | For the options above, the following values are supported for \"ABI\":\n\ |
| 2228 | ")); |
| 2229 | for (i = 0; i < ARRAY_SIZE (mips_abi_choices); i++) |
| 2230 | fprintf (stream, " %s", mips_abi_choices[i].name); |
| 2231 | fprintf (stream, _("\n")); |
| 2232 | |
| 2233 | fprintf (stream, _("\n\ |
| 2234 | For the options above, The following values are supported for \"ARCH\":\n\ |
| 2235 | ")); |
| 2236 | for (i = 0; i < ARRAY_SIZE (mips_arch_choices); i++) |
| 2237 | if (*mips_arch_choices[i].name != '\0') |
| 2238 | fprintf (stream, " %s", mips_arch_choices[i].name); |
| 2239 | fprintf (stream, _("\n")); |
| 2240 | |
| 2241 | fprintf (stream, _("\n")); |
| 2242 | } |