| 1 | 2016-01-09 Mike Frysinger <vapier@gentoo.org> |
| 2 | |
| 3 | * config.in, configure: Regenerate. |
| 4 | |
| 5 | 2016-01-06 Mike Frysinger <vapier@gentoo.org> |
| 6 | |
| 7 | * interp.c (sim_open): Mark argv const. |
| 8 | (sim_create_inferior): Mark argv and env const. |
| 9 | |
| 10 | 2016-01-04 Mike Frysinger <vapier@gentoo.org> |
| 11 | |
| 12 | * endian.c (get_word): Delete all arch/big endian logic. |
| 13 | (get_longword, write_word, write_longword): Likewise. |
| 14 | |
| 15 | 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
| 16 | |
| 17 | * interp.c (sim_open): Update sim_parse_args comment. |
| 18 | |
| 19 | 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
| 20 | |
| 21 | * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete. |
| 22 | * configure: Regenerate. |
| 23 | |
| 24 | 2016-01-02 Mike Frysinger <vapier@gentoo.org> |
| 25 | |
| 26 | * configure: Regenerate. |
| 27 | |
| 28 | 2015-12-30 Mike Frysinger <vapier@gentoo.org> |
| 29 | |
| 30 | * wrapper.c (d10v_reg_store, d10v_reg_fetch): Define. |
| 31 | (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE. |
| 32 | (sim_store_register): Rename to ... |
| 33 | (d10v_reg_store): ... this. Rename cpu to sd. |
| 34 | (sim_fetch_register): Rename to ... |
| 35 | (d10v_reg_fetch): ... this. Rename cpu to sd. |
| 36 | |
| 37 | 2015-12-27 Mike Frysinger <vapier@gentoo.org> |
| 38 | |
| 39 | * Makefile.in (SIM_OBJS): Delete sim-hload.o. |
| 40 | |
| 41 | 2015-12-26 Mike Frysinger <vapier@gentoo.org> |
| 42 | |
| 43 | * config.in, configure: Regenerate. |
| 44 | |
| 45 | 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| 46 | |
| 47 | * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o. |
| 48 | |
| 49 | 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| 50 | |
| 51 | * interp.c (sim_open): Delete sim_create_inferior call. |
| 52 | |
| 53 | 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| 54 | |
| 55 | * d10v_sim.h (d10v_callback): Delete. |
| 56 | * interp.c (d10v_callback): Delete. |
| 57 | (do_long, do_2_short, do_parallel, set_dmap_register, |
| 58 | set_imap_register, xfer_mem, dmem_addr, imem_addr, sim_info, |
| 59 | sim_create_inferior): Replace d10v_callback->printf_filtered |
| 60 | with sim_io_printf. |
| 61 | (sim_open): Delete d10v_callback assignment. |
| 62 | * simops.c (move_to_cr, trace_input_func, do_trace_output_flush, |
| 63 | do_trace_output_finish, trace_output_40, trace_output_32, |
| 64 | trace_output_16, trace_output_void, trace_output_flag, OP_5F20, |
| 65 | OP_5201, OP_27000000, OP_3220, OP_3400, OP_3000, OP_6C1F, OP_6C01, |
| 66 | OP_6E1F, OP_6E01): Replace d10v_callback->printf_filtered with |
| 67 | sim_io_printf and d10v_callback->flush_stdout with |
| 68 | sim_io_flush_stdout. |
| 69 | (OP_5F00): Likewise. Rename d10v_callback to cb. |
| 70 | |
| 71 | 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| 72 | |
| 73 | * Makefile.in (SIM_OBJS): Add sim-reason.o, sim-resume.o, and |
| 74 | sim-stop.o. |
| 75 | * d10v_sim.h (struct d10v_memory): Delete fault member. |
| 76 | (struct _state): Delete exception member. |
| 77 | * interp.c (lookup_hash): Call sim_engine_halt instead of setting |
| 78 | State.exception. |
| 79 | (do_2_short, do_parallel): Delete State.exception checks. |
| 80 | (sim_size): Mark static. |
| 81 | (map_memory): Call sim_engine_halt instead of returning fault. |
| 82 | Call xcalloc instead of calloc and checking the return. |
| 83 | (dmem_addr): Call sim_engine_halt when phys_size is 0. |
| 84 | (imem_addr): Likewise. |
| 85 | (stop_simulator, sim_stop, sim_stop_reason): Delete. |
| 86 | (sim_resume): Rename to ... |
| 87 | (step_once): ... this. Delete State.exception code and move |
| 88 | siggnal checking to sim_engine_run. |
| 89 | (sim_engine_run): New function. |
| 90 | * simops.c (EXCEPTION): Define. |
| 91 | (move_to_cr): Call EXCEPTION instead of setting State.exception. |
| 92 | (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000, |
| 93 | OP_6601, OP_6201, OP_6200, OP_33010000, OP_5201, OP_27000000, |
| 94 | OP_2F000000, OP_3220, OP_3200, OP_3400, OP_3000, OP_34000000, |
| 95 | OP_6800, OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, |
| 96 | OP_6A00, OP_6E1F, OP_6A01, OP_6E01, OP_37010000, OP_5FE0): Likewise. |
| 97 | (OP_5F20): Call sim_engine_halt instead of setting State.exception. |
| 98 | (OP_5F00): Call sim_engine_halt and EXCEPTION instead of setting |
| 99 | State.exception. |
| 100 | |
| 101 | 2015-11-15 Mike Frysinger <vapier@gentoo.org> |
| 102 | |
| 103 | * d10v_sim.h (struct simops): Add SIM_DESC and SIM_CPU to func args. |
| 104 | (SET_CREG, SET_HW_CREG, SET_PSW_BIT): Pass sd and cpu to move_to_cr. |
| 105 | (dmem_addr, imem_addr, move_to_cr): Add SIM_DESC and SIM_CPU args. |
| 106 | (RB, SW, RW, SLW, RLW): Pass sd and cpu to dmem_addr. |
| 107 | * endian.c: Change d10v_sim.h include to sim-main.h. |
| 108 | * gencode.c: Likewise. Add SIM_DESC and SIM_CPU args to all OPs. |
| 109 | * interp.c (lookup_hash, do_long, do_2_short, do_parallel, |
| 110 | map_memory, set_dmap_register, dmap_register, set_imap_register, |
| 111 | imap_register, sim_d10v_translate_dmap_addr, xfer_mem, |
| 112 | sim_d10v_translate_imap_addr, sim_d10v_translate_addr): Add |
| 113 | SIM_DESC and SIM_CPU args and adjust all callers. |
| 114 | (trace_sd): Delete. |
| 115 | (sim_open): Do not assign trace_sd. |
| 116 | (sim_resume, sim_create_inferior, sim_fetch_register, |
| 117 | sim_store_register): Set up cpu from the first one in sd. |
| 118 | * simops.c (move_to_cr): Add SIM_DESC and SIM_CPU args. |
| 119 | (trace_input_func, trace_input, do_trace_output_finish, |
| 120 | do_trace_output_finish, trace_output_40, trace_output_32, |
| 121 | trace_output_16, trace_output_void, trace_output_flag): Add |
| 122 | SIM_DESC arg. |
| 123 | (trace_input_func): Likewise. Change trace_sd to sd. |
| 124 | (OP_*): Add SIM_DESC and SIM_CPU args to all OP funcs. |
| 125 | |
| 126 | 2015-11-14 Mike Frysinger <vapier@gentoo.org> |
| 127 | |
| 128 | * interp.c (sim_close): Delete. |
| 129 | |
| 130 | 2015-11-10 Mike Frysinger <vapier@gentoo.org> |
| 131 | |
| 132 | * interp.c (sim_d10v_translate_dmap_addr): Mark static. |
| 133 | (sim_d10v_translate_imap_addr): Likewise. |
| 134 | (sim_d10v_translate_addr): Likewise. |
| 135 | |
| 136 | 2015-06-23 Mike Frysinger <vapier@gentoo.org> |
| 137 | |
| 138 | * configure: Regenerate. |
| 139 | |
| 140 | 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
| 141 | |
| 142 | * configure: Regenerate. |
| 143 | |
| 144 | 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
| 145 | |
| 146 | * configure: Regenerate. |
| 147 | |
| 148 | 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
| 149 | |
| 150 | * sim-main.h (SIM_CPU): Delete. |
| 151 | |
| 152 | 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
| 153 | |
| 154 | * sim-main.h (sim_cia): Delete. |
| 155 | |
| 156 | 2015-04-17 Mike Frysinger <vapier@gentoo.org> |
| 157 | |
| 158 | * sim-main.h (CIA_GET, CIA_SET): Delete. |
| 159 | |
| 160 | 2015-04-17 Mike Frysinger <vapier@gentoo.org> |
| 161 | |
| 162 | * interp.c (d10v_pc_get, d10v_pc_set): New functions. |
| 163 | (sim_open): Declare new local var i. Call CPU_PC_FETCH & |
| 164 | CPU_PC_STORE for all cpus. |
| 165 | |
| 166 | 2015-04-15 Mike Frysinger <vapier@gentoo.org> |
| 167 | |
| 168 | * Makefile.in (SIM_OBJS): Delete sim-cpu.o. |
| 169 | * sim-main.h (STATE_CPU): Delete. |
| 170 | |
| 171 | 2015-04-13 Mike Frysinger <vapier@gentoo.org> |
| 172 | |
| 173 | * configure: Regenerate. |
| 174 | |
| 175 | 2015-04-06 Mike Frysinger <vapier@gentoo.org> |
| 176 | |
| 177 | * Makefile.in (SIM_OBJS): Delete sim-engine.o. |
| 178 | |
| 179 | 2015-04-02 Mike Frysinger <vapier@gentoo.org> |
| 180 | |
| 181 | * interp.c (lookup_hash): Change SIGILL to GDB_SIGNAL_ILL. |
| 182 | (sim_resume): Change SIGBUS/SIGSEGV to GDB_SIGNAL_BUS, SIGILL to |
| 183 | GDB_SIGNAL_ILL, and SIGTRAP to GDB_SIGNAL_TRAP. |
| 184 | |
| 185 | 2015-04-01 Mike Frysinger <vapier@gentoo.org> |
| 186 | |
| 187 | * interp.c (sim_set_profile, sim_set_profile_size): Delete. |
| 188 | |
| 189 | 2015-03-31 Mike Frysinger <vapier@gentoo.org> |
| 190 | |
| 191 | * Makefile.in (simops.o): New rule. |
| 192 | |
| 193 | 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
| 194 | |
| 195 | * d10v_sim.h (text, text_start, text_end, prog_bfd): Delete. |
| 196 | (SEXT8, SEXT16, SEXT32, MASK32): Undefine. |
| 197 | * interp.c: Delete run-sim.h and d10v_sim.h includes. Include |
| 198 | sim-main.h and sim-options.h. |
| 199 | (myname, sim_kind, init_text_p, prog_bfd_was_opened_p, prog_bfd, |
| 200 | text, text_start, text_end, decode_pc, sim_set_profile, |
| 201 | sim_set_profile_size, sim_set_trace, sim_set_callbacks, |
| 202 | sim_trace, sim_do_command, sim_load): Delete. |
| 203 | (INLINE): Delete define. |
| 204 | (free_state): New function. |
| 205 | (trace_sd): Declare global variable. |
| 206 | (sim_open): Rewrite to use new common logic. |
| 207 | (sim_close): Delete body. |
| 208 | * Makefile.in (SIM_RUN_OBJS, SIM_EXTRA_CFLAGS): Delete. |
| 209 | (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS). |
| 210 | * sim-main.h: New file. |
| 211 | * simops.c: Change d10v_sim.h include to sim-main.h. |
| 212 | (trace_input_func): Rewrite pc checks to use trace_sd. |
| 213 | |
| 214 | 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
| 215 | |
| 216 | * Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK. |
| 217 | * interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL, |
| 218 | ui_loop_hook_counter, deprecated_ui_loop_hook): Delete. |
| 219 | (sim_resume) [NEED_UI_LOOP_HOOK]: Delete ui code. |
| 220 | |
| 221 | 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
| 222 | |
| 223 | * Makefile.in (gencode.o, d10v-opc.o): Add $(WARN_CFLAGS). |
| 224 | (gencode): Add $(BUILD_LDFLAGS). |
| 225 | * endian.c (get_word, get_longword, get_longlong, write_word, |
| 226 | write_longword, write_longlong): Convert old style prototypes. |
| 227 | * gencode.c: Include string.h. |
| 228 | (main): Convert old style prototype. |
| 229 | (write_header): Convert old style prototype and fix printf format. |
| 230 | (write_template, write_opcodes): Likewise. |
| 231 | (check_opcodes): Mark static void. |
| 232 | * interp.c: Include inttypes.h and run-sim.h. |
| 233 | (hash, lookup_hash, decode_pc, do_long, do_2_short, do_parallel, |
| 234 | add_commas, sim_size, sim_write, sim_read, sim_open, sim_close, |
| 235 | sim_set_profile, sim_set_profile_size, sim_stop, +sim_resume, |
| 236 | sim_info, sim_set_callbacks, sim_stop_reason, sim_fetch_register, |
| 237 | sim_store_register, sim_do_command, sim_load): Convert old style |
| 238 | prototypes. |
| 239 | (sim_create_inferior): Fix pointer cast to use uintptr_t. |
| 240 | * simops.c (strrchr): Delete prototype. |
| 241 | (trace_input_func): Mark name static. |
| 242 | (trace_input_func, trace_output_void, trace_output_flag): Convert old style |
| 243 | prototypes. |
| 244 | (OP_*): Convert old style prototypes. |
| 245 | |
| 246 | 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
| 247 | |
| 248 | * Makefile.in (interp.o, simops.o, endian.o, table.o): Delete rules. |
| 249 | * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT, |
| 250 | SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT, and |
| 251 | SIM_AC_OPTION_INLINE. |
| 252 | * config.in, configure: Regenerate. |
| 253 | * interp.c (sim_trace): Define. |
| 254 | |
| 255 | 2015-03-16 Mike Frysinger <vapier@gentoo.org> |
| 256 | |
| 257 | * config.in, configure: Regenerate. |
| 258 | |
| 259 | 2015-03-14 Mike Frysinger <vapier@gentoo.org> |
| 260 | |
| 261 | * Makefile.in (SIM_EXTRA_CFLAGS): Add |
| 262 | -DSIM_USE_DEPRECATED_RUN_FRONTEND. |
| 263 | (SIM_RUN_OBJS): Set to run.o. |
| 264 | |
| 265 | 2015-03-14 Mike Frysinger <vapier@gentoo.org> |
| 266 | |
| 267 | * configure.ac (AC_CHECK_HEADERS): Delete. |
| 268 | * aclocal.m4, configure: Regenerate. |
| 269 | |
| 270 | 2014-08-19 Alan Modra <amodra@gmail.com> |
| 271 | |
| 272 | * configure: Regenerate. |
| 273 | |
| 274 | 2014-08-15 Roland McGrath <mcgrathr@google.com> |
| 275 | |
| 276 | * configure: Regenerate. |
| 277 | * config.in: Regenerate. |
| 278 | |
| 279 | 2014-03-10 Mike Frysinger <vapier@gentoo.org> |
| 280 | |
| 281 | * interp.c (sim_do_command): Add const to cmd. |
| 282 | |
| 283 | 2014-03-05 Mike Frysinger <vapier@gentoo.org> |
| 284 | |
| 285 | * interp.c (sim_load): Add const to prog. |
| 286 | |
| 287 | 2014-03-04 Mike Frysinger <vapier@gentoo.org> |
| 288 | |
| 289 | * configure: Regenerate. |
| 290 | |
| 291 | 2013-09-23 Alan Modra <amodra@gmail.com> |
| 292 | |
| 293 | * configure: Regenerate. |
| 294 | |
| 295 | 2013-06-03 Mike Frysinger <vapier@gentoo.org> |
| 296 | |
| 297 | * aclocal.m4, configure: Regenerate. |
| 298 | |
| 299 | 2013-05-10 Freddie Chopin <freddie_chopin@op.pl> |
| 300 | |
| 301 | * configure: Rebuild. |
| 302 | |
| 303 | 2012-06-19 Joel Brobecker <brobecker@adacore.com> |
| 304 | |
| 305 | * interp.c: #include "config.h" instead of "sysdep.h". |
| 306 | Add conditional include of string.h or strings.h, as well as |
| 307 | conditional include of stdlib.h. |
| 308 | |
| 309 | 2012-06-15 Joel Brobecker <brobecker@adacore.com> |
| 310 | |
| 311 | * config.in, configure: Regenerate. |
| 312 | |
| 313 | 2012-05-24 Pedro Alves <palves@redhat.com> |
| 314 | |
| 315 | PR gdb/7205 |
| 316 | |
| 317 | Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. |
| 318 | |
| 319 | 2012-03-24 Mike Frysinger <vapier@gentoo.org> |
| 320 | |
| 321 | * aclocal.m4, config.in, configure: Regenerate. |
| 322 | |
| 323 | 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
| 324 | |
| 325 | * aclocal.m4: New file. |
| 326 | * configure: Regenerate. |
| 327 | |
| 328 | 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| 329 | |
| 330 | * configure.ac: Change include to common/acinclude.m4. |
| 331 | |
| 332 | 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| 333 | |
| 334 | * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER |
| 335 | call. Replace common.m4 include with SIM_AC_COMMON. |
| 336 | * configure: Regenerate. |
| 337 | |
| 338 | 2010-04-14 Mike Frysinger <vapier@gentoo.org> |
| 339 | |
| 340 | * interp.c (sim_write): Add const to buffer arg. |
| 341 | |
| 342 | 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| 343 | |
| 344 | * configure: Regenerate. |
| 345 | |
| 346 | 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| 347 | |
| 348 | * config.in: Regenerate. |
| 349 | * configure: Likewise. |
| 350 | |
| 351 | * configure: Regenerate. |
| 352 | |
| 353 | 2008-07-11 Hans-Peter Nilsson <hp@axis.com> |
| 354 | |
| 355 | * configure: Regenerate to track ../common/common.m4 changes. |
| 356 | * config.in: Ditto. |
| 357 | |
| 358 | 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> |
| 359 | Daniel Jacobowitz <dan@codesourcery.com> |
| 360 | Joseph Myers <joseph@codesourcery.com> |
| 361 | |
| 362 | * configure: Regenerate. |
| 363 | |
| 364 | 2006-12-21 Hans-Peter Nilsson <hp@axis.com> |
| 365 | |
| 366 | * acconfig.h: Remove. |
| 367 | * config.in: Regenerate. |
| 368 | |
| 369 | 2006-06-13 Richard Earnshaw <rearnsha@arm.com> |
| 370 | |
| 371 | * configure: Regenerated. |
| 372 | |
| 373 | 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com> |
| 374 | |
| 375 | * configure: Regenerated. |
| 376 | |
| 377 | 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com> |
| 378 | |
| 379 | * configure: Regenerated. |
| 380 | |
| 381 | 2006-04-18 Nick Clifton <nickc@redhat.com> |
| 382 | |
| 383 | * interp.c (sim_stop_reason): Fix typo. |
| 384 | |
| 385 | 2005-11-28 Mark Mitchell <mark@codesourcery.com> |
| 386 | |
| 387 | * interp.c (gdb/signals.h): Include it. |
| 388 | (sim_stop_reason): Use TARGET_SIGNAL_*. |
| 389 | |
| 390 | 2005-03-23 Mark Kettenis <kettenis@gnu.org> |
| 391 | |
| 392 | * configure: Regenerate. |
| 393 | |
| 394 | 2005-01-14 Andrew Cagney <cagney@gnu.org> |
| 395 | |
| 396 | * configure.ac: Sinclude aclocal.m4 before common.m4. Add |
| 397 | explicit call to AC_CONFIG_HEADER. |
| 398 | * configure: Regenerate. |
| 399 | |
| 400 | 2005-01-12 Andrew Cagney <cagney@gnu.org> |
| 401 | |
| 402 | * configure.ac: Update to use ../common/common.m4. |
| 403 | * configure: Re-generate. |
| 404 | |
| 405 | 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> |
| 406 | |
| 407 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 408 | |
| 409 | 2005-01-07 Andrew Cagney <cagney@gnu.org> |
| 410 | |
| 411 | * configure.ac: Rename configure.in, require autoconf 2.59. |
| 412 | * configure: Re-generate. |
| 413 | |
| 414 | 2004-12-08 Hans-Peter Nilsson <hp@axis.com> |
| 415 | |
| 416 | * configure: Regenerate for ../common/aclocal.m4 update. |
| 417 | |
| 418 | 2004-06-28 Andrew Cagney <cagney@gnu.org> |
| 419 | |
| 420 | * interp.c (sim_resume): Rename ui_loop_hook to |
| 421 | deprecated_ui_loop_hook. |
| 422 | |
| 423 | 2003-10-30 Andrew Cagney <cagney@redhat.com> |
| 424 | |
| 425 | * simops.c: Replace "struct symbol_cache_entry" with "struct |
| 426 | bfd_symbol". |
| 427 | |
| 428 | 2003-06-22 Andrew Cagney <cagney@redhat.com> |
| 429 | |
| 430 | * interp.c (xfer_mem): Simplify. Only do a single partial |
| 431 | transfer. Problem reported by Tom Rix. |
| 432 | |
| 433 | 2003-05-07 Andrew Cagney <cagney@redhat.com> |
| 434 | |
| 435 | * interp.c (sim_d10v_translate_addr): Add "regcache" parameter. |
| 436 | (sim_d10v_translate_imap_addr): Ditto. |
| 437 | (sim_d10v_translate_dmap_addr): Ditto. |
| 438 | (xfer_mem): Pass NULL regcache to sim_d10v_translate_addr. |
| 439 | (dmem_addr): Pass NULL regcache to sim_d10v_translate_dmap_addr. |
| 440 | (dmap_register, imap_register): Add "regcache" parameter. |
| 441 | (imem_addr): Pass NULL regcache to sim_d10v_translate_imap_addr. |
| 442 | (sim_fetch_register): Pass NULL regcache to imap_register and |
| 443 | dmap_register. |
| 444 | |
| 445 | 2003-02-27 Andrew Cagney <cagney@redhat.com> |
| 446 | |
| 447 | * interp.c (sim_open, sim_create_inferior): Rename _bfd to bfd. |
| 448 | |
| 449 | 2002-11-13 Andrew Cagney <cagney@redhat.com> |
| 450 | |
| 451 | * simops.c: Include <string.h>. |
| 452 | |
| 453 | 2002-06-17 Andrew Cagney <cagney@redhat.com> |
| 454 | |
| 455 | * d10v_sim.h (SET_PSW_BIT): Add cast to avoid inverting an enum. |
| 456 | |
| 457 | 2002-06-16 Andrew Cagney <ac131313@redhat.com> |
| 458 | |
| 459 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 460 | |
| 461 | 2002-06-13 Tom Rix <trix@redhat.com> |
| 462 | |
| 463 | * interp.c (xfer_mem): Fix transfers across multiple segments. |
| 464 | |
| 465 | 2002-06-09 Andrew Cagney <cagney@redhat.com> |
| 466 | |
| 467 | * Makefile.in (INCLUDE): Update path to callback.h. |
| 468 | * gencode.c: Do not include "callback.h". |
| 469 | * d10v_sim.h: Include "gdb/callback.h" and "gdb/remote-sim.h". |
| 470 | * interp.c: Ditto. |
| 471 | |
| 472 | 2002-06-08 Andrew Cagney <cagney@redhat.com> |
| 473 | |
| 474 | * interp.c (sim_fetch_register): Fix name of enum used in cast. |
| 475 | (sim_store_register): Ditto. |
| 476 | |
| 477 | 2002-06-02 Elena Zannoni <ezannoni@redhat.com> |
| 478 | |
| 479 | From Jason Eckhardt <jle@redhat.com> |
| 480 | * d10v_sim.h (INC_ADDR): Correctly handle the case where MOD_E is |
| 481 | less than MOD_S (post-decrement). |
| 482 | |
| 483 | 2002-06-01 Andrew Cagney <ac131313@redhat.com> |
| 484 | |
| 485 | * interp.c (sim_fetch_register, sim_store_register): Use a switch |
| 486 | statement and enums from "sim-d10v.h". |
| 487 | |
| 488 | 2002-05-28 Elena Zannoni <ezannoni@redhat.com> |
| 489 | |
| 490 | * interp.c (sim_create_inferior): Add comment. |
| 491 | |
| 492 | From Alan Matsuoka <alanm@redhat.com>: |
| 493 | From 2001-04-27 Jason Eckhardt <jle@cygnus.com>: |
| 494 | * simops.c (OP_4400): Output "mvf0f" instead of "mf0f". |
| 495 | (OP_4401): Output "mvf0t" instead of "mf0t". |
| 496 | (OP_460B): Do not output a flag register. |
| 497 | (OP_4609): Do not output a flag register. |
| 498 | |
| 499 | 2002-05-23 Andrew Cagney <ac131313@redhat.com> |
| 500 | |
| 501 | * Makefile.in (INCLUDE): Add "gdb/sim-d10v.h". |
| 502 | * interp.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h". |
| 503 | |
| 504 | 2001-08-01 John R. Moore <jmoore@redhat.com> |
| 505 | |
| 506 | * interp.c (sim_create_inferior): Removed a hack that stated |
| 507 | it was setting r0/r1 with argc/argv. |
| 508 | |
| 509 | 2001-04-15 J.T. Conklin <jtc@redback.com> |
| 510 | |
| 511 | * Makefile.in (simops.o): Add simops.h to dependency list. |
| 512 | |
| 513 | Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| 514 | |
| 515 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 516 | |
| 517 | Tue Apr 18 16:26:41 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| 518 | |
| 519 | * interp.c (sim_resume): Deliver SIGILL. |
| 520 | (lookup_hash): Do not print SIGILL message. |
| 521 | |
| 522 | Tue Feb 22 18:24:56 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| 523 | |
| 524 | * Makefile.in (SIM_EXTRA_CFLAGS): Define SIM_HAVE_ENVIRONMENT. |
| 525 | * interp.c (sim_set_trace): Replace sim_trace. Enable tracing. |
| 526 | |
| 527 | Tue Feb 8 17:41:12 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| 528 | |
| 529 | * d10v_sim.h (SIG_D10V_BUS): Define. |
| 530 | |
| 531 | * simops.c (address_exception): Delete function. |
| 532 | (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000, |
| 533 | OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800, |
| 534 | OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00, |
| 535 | OP_6E1F, OP_6A01, OP_6E01, OP_37010000): Replace call to |
| 536 | address_exception with code that sets SIG_D10V_BUS. |
| 537 | |
| 538 | * interp.c (sim_resume): When SIGBUS or SIGSEGV, deliver a bus |
| 539 | error to the simulator before resuming execution. |
| 540 | (sim_trace): Check stop reason and use that to determine sim_trace |
| 541 | return value. |
| 542 | (sim_stop_reason): For SIG_D10V_BUS return a SIGBUS / SIGSEGV |
| 543 | sigrc. |
| 544 | |
| 545 | Tue Jan 18 16:07:42 MST 2000 Diego Novillo <dnovillo@cygnus.com> |
| 546 | |
| 547 | * interp.c (sim_create_inferior): Change internal initial value for |
| 548 | DMAP2 to 0x2000. |
| 549 | |
| 550 | Mon Jan 3 02:06:07 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| 551 | |
| 552 | * interp.c (lookup_hash): Stop the update of the PC when there was |
| 553 | an illegal instruction exception. |
| 554 | |
| 555 | Mon Jan 3 00:14:33 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| 556 | |
| 557 | * simops.c (address_exception): New function. |
| 558 | (OP_30000000, OP_6401, OP_6001, OP_6000, OP_32010000, OP_31000000, |
| 559 | OP_6601, OP_6201, OP_6200, OP_33010000, OP_34000000, OP_6800, |
| 560 | OP_6C1F, OP_6801, OP_6C01, OP_36010000, OP_35000000, OP_6A00, |
| 561 | OP_6E1F, OP_6A01, OP_6E01, OP_37010000): For "ld", "ld2w", "st" |
| 562 | and "st2w" check that the address is aligned. |
| 563 | |
| 564 | 1999-12-30 Chandra Chavva <cchavva@cygnus.com> |
| 565 | |
| 566 | * d10v_sim.h (INC_ADDR): Added code to assign |
| 567 | proper address for loads with predec operations. |
| 568 | |
| 569 | 1999-11-25 Nick Clifton <nickc@cygnus.com> |
| 570 | |
| 571 | * simops.c (OP_4E0F): New function: Simulate new bit pattern for |
| 572 | cpfg instruction. |
| 573 | |
| 574 | Fri Oct 29 18:34:28 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| 575 | |
| 576 | * simops.c (move_to_cr): Don't allow user to set PSW.DM in either |
| 577 | DPSW and BPSW. |
| 578 | |
| 579 | Thu Oct 28 01:26:18 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| 580 | |
| 581 | * simops.c (OP_5F20): Use SET_HW_PSW when updating PSW. |
| 582 | (PSW_HW_MASK): Declare. |
| 583 | |
| 584 | * d10v_sim.h (move_to_cr): Add ``psw_hw_p'' parameter. |
| 585 | (SET_CREG, SET_PSW_BIT): Update. |
| 586 | (SET_HW_CREG, SET_HW_PSW): Define. |
| 587 | |
| 588 | Sun Oct 24 21:38:04 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| 589 | |
| 590 | * interp.c (sim_d10v_translate_dmap_addr): Fix extraction of IOSP |
| 591 | for DMAP3. |
| 592 | |
| 593 | Sun Oct 24 16:04:16 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| 594 | |
| 595 | * interp.c (sim_d10v_translate_addr): New function. |
| 596 | (xfer_mem): Rewrite. Use sim_d10v_translate_addr. |
| 597 | (map_memory): Make INLINE. |
| 598 | |
| 599 | Sun Oct 24 13:45:19 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| 600 | |
| 601 | * interp.c (sim_d10v_translate_dmap_addr): New function. |
| 602 | (dmem_addr): Rewrite. Use sim_d10v_translate_dmap_addr. Change |
| 603 | offset parameter to type uint16. |
| 604 | * d10v_sim.h (dmem_addr): Update declaration. |
| 605 | |
| 606 | Sun Oct 24 13:07:31 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| 607 | |
| 608 | * interp.c (imap_register, set_imap_register, dmap_register, |
| 609 | set_imap_register): Use map_memory. |
| 610 | (DMAP): Update. |
| 611 | (sim_create_inferior): Initialize all DMAP registers. NOTE that |
| 612 | DMAP2, in internal memory mode, is set to 0x0000 and NOT |
| 613 | 0x2000. This is consistent with the older d10v boards. |
| 614 | |
| 615 | Sun Oct 24 11:22:12 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| 616 | |
| 617 | * interp.c (sim_d10v_translate_imap_addr): New function. |
| 618 | (imem_addr): Rewrite. Use sim_d10v_translate_imap_addr. |
| 619 | (last_from, last_to): Declare. |
| 620 | |
| 621 | Sun Oct 24 01:21:56 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| 622 | |
| 623 | * d10v_sim.h (struct d10v_memory): Define. Support very long |
| 624 | memories. |
| 625 | (struct _state): Replace imem, dmem and umem by mem. |
| 626 | (IMAP_BLOCK_SIZE, DMAP_BLOCK_SIZE, SEGMENT_SIZE, IMEM_SEGMENTS, |
| 627 | DMEM_SEGMENTS, UMEM_SEGMENTS): Define. |
| 628 | |
| 629 | * interp.c (map_memory): New function. |
| 630 | (sim_size, xfer_memory, imem_addr, dmem_addr): Update. |
| 631 | (UMEM_SEGMENTS): Moveed to "d10v_sim.h". |
| 632 | (IMEM_SIZEDMEM_SIZE): Delete. |
| 633 | |
| 634 | Sat Oct 23 20:06:58 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| 635 | |
| 636 | * interp.c: Include "sim-d10v.h". |
| 637 | (imap_register, set_imap_register, dmap_register, |
| 638 | set_dmap_register, spi_register, spu_register, set_spi_register, |
| 639 | set_spu_register): New functions. |
| 640 | (sim_create_inferior): Update. |
| 641 | (sim_fetch_register, sim_store_register): Rewrite. Use enums |
| 642 | defined in sim-d10v.h. |
| 643 | |
| 644 | * d10v_sim.h (DEBUG_MEMORY): Define. |
| 645 | (IMAP0, IMAP1, DMAP, SET_IMAP0, SET_IMAP1, SET_DMAP): Delete. |
| 646 | |
| 647 | Sat Oct 23 18:41:18 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| 648 | |
| 649 | * interp.c (sim_open): Allow a debug value to be passed to the -t |
| 650 | option. |
| 651 | (lookup_hash): Don't exit on an illegal instruction. |
| 652 | (do_long, do_2_short, do_parallel): Check for failed instruction |
| 653 | lookup. |
| 654 | |
| 655 | Mon Oct 18 18:03:24 MDT 1999 Diego Novillo <dnovillo@cygnus.com> |
| 656 | |
| 657 | * simops.c (OP_3220): Fix trace output for illegal accumulator |
| 658 | message. |
| 659 | |
| 660 | 1999-09-14 Nick Clifton <nickc@cygnus.com> |
| 661 | |
| 662 | * simops.c: Disable setting of DM bit in PSW. |
| 663 | |
| 664 | Wed Sep 8 19:34:55 MDT 1999 Diego Novillo <dnovillo@cygnus.com> |
| 665 | |
| 666 | * simops.c (op_types): Added new memory indirect type OP_MEMREF3. |
| 667 | (trace_input_func): Added support for OP_MEMREF3. |
| 668 | (OP_32010000): New instruction ld. |
| 669 | (OP_33010000): New instruction ld2w. |
| 670 | (OP_5209): New instruction sac. |
| 671 | (OP_4209): New instruction sachi. |
| 672 | (OP_3220): New instruction slae. |
| 673 | (OP_36010000): New instruction st. |
| 674 | (OP_37010000): New instruction st2w. |
| 675 | |
| 676 | 1999-09-09 Stan Shebs <shebs@andros.cygnus.com> |
| 677 | |
| 678 | * interp.c (old_segment_mapping): New global. |
| 679 | (xfer_mem): Change the default segment mapping to be the way |
| 680 | that Mitsubishi prefers, but use the previous mapping if |
| 681 | old_segment_mapping is true. |
| 682 | (sim_open): Add an option -oldseg to get the old mapping. |
| 683 | (sim_create_inferior): Init mapping registers based on the |
| 684 | value of old_segment_mapping. |
| 685 | |
| 686 | 1999-09-07 Nick Clifton <nickc@cygnus.com> |
| 687 | |
| 688 | * simops.c (OP_6601): Do not write back decremented address if |
| 689 | either of the destination registers was the same as the address |
| 690 | register. |
| 691 | (OP_6201): Do not write back incremented address if either of the |
| 692 | destination registers was the same as the address register. |
| 693 | |
| 694 | Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| 695 | |
| 696 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 697 | |
| 698 | 1999-05-08 Felix Lee <flee@cygnus.com> |
| 699 | |
| 700 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 701 | |
| 702 | 1999-04-02 Keith Seitz <keiths@cygnus.com> |
| 703 | |
| 704 | * interp.c (ui_loop_hook_counter): New global (when NEED_UI_LOOP_HOOK |
| 705 | defined). |
| 706 | (sim_resume): If the counter has expired, call the ui_loop_hook, |
| 707 | if defined. |
| 708 | (UI_LOOP_POLL_INTERVAL): Define. Used to tweak the frequency of |
| 709 | ui_loop_hook calls. |
| 710 | * Makefile.in (SIM_EXTRA_CFLAGS): Include NEED_UI_LOOP_HOOK. |
| 711 | |
| 712 | Wed Mar 10 19:32:13 1999 Nick Clifton <nickc@cygnus.com> |
| 713 | |
| 714 | * simops.c: If load instruction with auto increment/decrement |
| 715 | addressing is used when the destination register is the same as |
| 716 | the address register, then ignore the auto increment/decrement. |
| 717 | |
| 718 | Wed Mar 10 19:32:13 1999 Martin M. Hunt <hunt@cygnus.com> |
| 719 | |
| 720 | * simops.c (OP_5F00): Ifdef SYS_stat case because |
| 721 | not all systems have it defined. |
| 722 | |
| 723 | 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com) |
| 724 | |
| 725 | * simops.c (OP_5607): Correct saturation comparison/assignment. |
| 726 | (OP_1201, OP_1203, OP_17001200, OP_17001202, |
| 727 | OP_2A00, OP_2800, OP_2C00, OP_3200, OP_3201, |
| 728 | OP_1001, OP_1003, OP_17001000, OP_17001002): Ditto. |
| 729 | |
| 730 | 1999-01-26 Jason Molenda (jsm@bugshack.cygnus.com) |
| 731 | |
| 732 | * simops.c (OP_5605): Sign extend MIN32 and MAX32 before saturation |
| 733 | comparison. |
| 734 | (OP_5607): Ditto. |
| 735 | (OP_2A00): Ditto. |
| 736 | (OP_2800): Ditto. |
| 737 | |
| 738 | 1999-01-13 Jason Molenda (jsm@bugshack.cygnus.com) |
| 739 | |
| 740 | * simops.c (OP_1223): Sign extend MIN32 and MAX32 before saturation |
| 741 | comparison. |
| 742 | |
| 743 | Tue Nov 24 17:04:43 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 744 | |
| 745 | * simops.c (sys/syscall.h): Include targ-vals.h instead. |
| 746 | (SYS_*): Replace with TARGET_SYS_*. |
| 747 | |
| 748 | * Makefile.in: Add dependency on targ-vals.h. |
| 749 | (NL_TARGET): Define as NL_TARGET_d10v. |
| 750 | |
| 751 | Wed Sep 30 00:06:32 1998 Andrew Cagney <cagney@amy.cygnus.com> |
| 752 | |
| 753 | * interp.c (xfer_mem): Missing break, instruction memory case |
| 754 | flowed into unified memory case. |
| 755 | |
| 756 | Wed Sep 30 10:14:18 1998 Nick Clifton <nickc@cygnus.com> |
| 757 | |
| 758 | * simops.c: If load instruction with auto increment/decrement |
| 759 | addressing is used when the destination register is the same as |
| 760 | the address register, then ignore the auto increment/decrement. |
| 761 | |
| 762 | Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com> |
| 763 | |
| 764 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 765 | |
| 766 | Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche> |
| 767 | |
| 768 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 769 | * config.in: Ditto. |
| 770 | |
| 771 | Sun Apr 26 15:20:23 1998 Tom Tromey <tromey@cygnus.com> |
| 772 | |
| 773 | * acconfig.h: New file. |
| 774 | * configure.in: Reverted change of Apr 24; use sinclude again. |
| 775 | |
| 776 | Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche> |
| 777 | |
| 778 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 779 | * config.in: Ditto. |
| 780 | |
| 781 | Fri Apr 24 11:20:06 1998 Tom Tromey <tromey@cygnus.com> |
| 782 | |
| 783 | * configure.in: Don't call sinclude. |
| 784 | |
| 785 | Fri Apr 24 11:04:46 1998 Andrew Cagney <cagney@chook.cygnus.com> |
| 786 | |
| 787 | * interp.c (struct hash_entry): OPCODE and MASK are unsigned. |
| 788 | |
| 789 | * d10v_sim.h (remote-sim.h, sim-config.h): Include. |
| 790 | |
| 791 | Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 792 | |
| 793 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 794 | |
| 795 | Wed Apr 1 12:59:17 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 796 | |
| 797 | * simops.c (trace_input_func): Use move_from_cr / CREGS to obtain |
| 798 | up-to-date CR value. |
| 799 | (OP_OP_1000000, add3): Trace inputs before performing add. |
| 800 | (OP_5F00, <*>): Trace input registers before making system call. |
| 801 | (OP_5F00, <kill>): Trace R0, R1 not REGn. |
| 802 | (OP_5F00, <getpid>): Always return 47. |
| 803 | |
| 804 | * d10v_sim.h (SLOT, SLOT_NR, SLOT_PEND_MASK, SLOT_PEND, |
| 805 | SLOT_DISCARD, SLOT_FLUSH): Define. An implementation of write |
| 806 | back slots. |
| 807 | (struct _state): Add struct slot slot to global state variable. |
| 808 | (struct _state): Delete fields SM, EA, DB, DM, IE, RP, MD, FX, ST, |
| 809 | F0, F1, C from global State variable. |
| 810 | (struct _state): Add struct trace to global State variable. |
| 811 | (GPR, SET_GPR): Define. SET_GPR uses SLOT_PEND. |
| 812 | (PSW*, SET_PSW*): Define. SET_PSW* uses SET_CREG. |
| 813 | (CREG, SET_CREG, SET_*): Define. SET_CREG uses func move_to_cr. |
| 814 | (INC_ADDR): Re-implement. Use SET_GPR to update registers. |
| 815 | (JMP): Re-implement. Use SET_* to update registers. |
| 816 | |
| 817 | * interp.c: Use new SET_* et.al. macros to fetch / store |
| 818 | registers. |
| 819 | (get_operands): Squirrel away trace values at start of each |
| 820 | operand decode. |
| 821 | (do_2_short): Flush pending writes before issuing second |
| 822 | instruction. |
| 823 | (sim_resume): Flush pending writes at end of instruction cycle. |
| 824 | (sim_fetch_register, sim_store_register, sim_create_inferior): |
| 825 | After scheduling updates to registers using SET_*, flush updates. |
| 826 | (sim_resume): Re-order handling of RPT/repeat and IBA/hbreak so |
| 827 | that each sets pc using SET_* and last SET_* eventually winds out. |
| 828 | |
| 829 | * simops.c: Use new SET_* et.al. macros to fetch / store |
| 830 | registers. |
| 831 | (move_to_cr): Add MASK argument for selective update of CREG bits. |
| 832 | Re-implement using new SET_* macros. |
| 833 | (trace_output_func, trace_output): Delete. Replace with. |
| 834 | (do_trace_output_flush, trace_output_finish, trace_output_40, |
| 835 | trace_output_32, trace_output_16, trace_output_void, |
| 836 | trace_output_flag): New functions. Handle specific trace cases. |
| 837 | (OP_*): Re-write tracing to use new trace_output_* functions. |
| 838 | (OP_*): Re-write to use new SET_* et.al. macros. |
| 839 | (FUNC, PARM[1-4], RETVAL, RETVAL32): Redo definition. |
| 840 | (RETVAL_HIGH, RETVAL_LOW): Delete, use RETVAL32. |
| 841 | |
| 842 | Wed Apr 1 12:55:18 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 843 | |
| 844 | * configure.in (SIM_AC_OPTION_WARNINGS): Add. |
| 845 | configure: Re-generate. |
| 846 | |
| 847 | Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 848 | |
| 849 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 850 | |
| 851 | Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 852 | |
| 853 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 854 | |
| 855 | Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 856 | |
| 857 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 858 | |
| 859 | Tue Feb 17 12:38:42 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 860 | |
| 861 | * interp.c (sim_store_register, sim_fetch_register): Pass in |
| 862 | length parameter. Return -1. |
| 863 | |
| 864 | Mon Oct 27 14:43:33 1997 Fred Fish <fnf@cygnus.com> |
| 865 | |
| 866 | * (dmem_addr): If address is illegal or in I/O space, signal a bus |
| 867 | error. Allocate unified memory on demand. Fix DMEM address |
| 868 | calculations. |
| 869 | |
| 870 | Mon Feb 16 10:27:53 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 871 | |
| 872 | * simops.c (OP_5F20): Implement "dbt". |
| 873 | (OP_5F60): Implement "rtd". |
| 874 | |
| 875 | * d10v_sim.h (DPC_CR): Define enum. |
| 876 | (DBT_VECTOR_START): Define |
| 877 | (DPSW, DPC): Define. |
| 878 | |
| 879 | Fri Feb 13 15:15:58 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 880 | |
| 881 | * simops.c (move_to_cr): Sync regs[SP_IDX] with State.sp according |
| 882 | to PSW:SM. |
| 883 | |
| 884 | * d10v_sim.h (struct _state): Add sp, as holding area for SPI/SPU. |
| 885 | (SP_IDX): Define. |
| 886 | |
| 887 | Wed Feb 11 16:53:49 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 888 | |
| 889 | * simops.c (OP_5F00): Call error instead of abort for unknown |
| 890 | syscalls. |
| 891 | |
| 892 | * d10v_sim.h (enum): Define DPSW_CR. |
| 893 | |
| 894 | * simops.c (move_to_cr): Mask out hardwired zero bits in DPSW. |
| 895 | |
| 896 | Tue Feb 10 18:28:38 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 897 | |
| 898 | * interp.c (sim_write_phys): Delete. |
| 899 | (sim_load): Call sim_load_file with sim_write and LMA. |
| 900 | |
| 901 | Mon Feb 9 12:05:01 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 902 | |
| 903 | * interp.c: Rewrite xfer_mem so that it translates addresses as - |
| 904 | 0x00... - DMAP translated memory, 0x01... IMAP translated memory, |
| 905 | 0x10... - on-chip data, 0x11... - on-chip insn, 0x12... - unified |
| 906 | memory. |
| 907 | (pc_addr): Delete. |
| 908 | (imem_addr): New function - translate IMEM address. |
| 909 | (sim_resume): Use imem_addr to translate insn address, abort if |
| 910 | translation failed. |
| 911 | (sim_create_inferior): Write ARGV to memory using sim_write. Pass |
| 912 | argc/argv using r0/r1 not r2/r3. |
| 913 | (sim_size): Do not initialize IMAP/DMAP here. |
| 914 | (sim_open): Call sim_create_inferior and sim_size to initialize |
| 915 | the system. |
| 916 | (sim_create_inferior): Initialize IMAP/DMAP to hardware reset |
| 917 | defaults. |
| 918 | (init_system): Delete. |
| 919 | (xfer_mem, sim_fetch_register, sim_store_register): Do not call |
| 920 | init_system. |
| 921 | (decode_pc): Check prog_bfd is defined before looking up .text |
| 922 | section. |
| 923 | |
| 924 | Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 925 | |
| 926 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 927 | |
| 928 | Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| 929 | |
| 930 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 931 | |
| 932 | Sun Jan 25 22:23:01 1998 Michael Meissner <meissner@cygnus.com> |
| 933 | |
| 934 | * interp.c (sim_stop_reason): Exit status is now in r0, not r2. |
| 935 | |
| 936 | Sat Jan 24 19:00:30 1998 Michael Meissner <meissner@cygnus.com> |
| 937 | |
| 938 | * d10v_sim.h (DEBUG_TRAP): New debug flag. |
| 939 | |
| 940 | * simops.c (OP_5F00): If DEBUG_TRAP is on, turn traps 0-14 into |
| 941 | printing the registers. |
| 942 | |
| 943 | Thu Jan 22 17:54:01 1998 Michael Meissner <meissner@cygnus.com> |
| 944 | |
| 945 | * simops.c (op_types): New ABI, args are r0..r3, system call # is |
| 946 | in r4. |
| 947 | (trace_{in,out}put_func): Ditto. |
| 948 | (OP_4900): Ditto. |
| 949 | (OP_24800000): Ditto. |
| 950 | (OP_4D00): Ditto. |
| 951 | (OP_5F00): Ditto. |
| 952 | |
| 953 | Thu Jan 22 14:30:36 1998 Fred Fish <fnf@cygnus.com> |
| 954 | |
| 955 | * interp.c (UMEM_SEGMENTS): New define, set to 128. |
| 956 | (sim_size): Use UMEM_SEGMENTS rather than hardwired constant. |
| 957 | (sim_close): Reset prog_bfd to NULL after closing it. Also |
| 958 | reset prog_bfd_was_opened_p after closing prog_bfd. |
| 959 | (sim_load): Reset prog_bfd_was_opened_p after closing prog_bfd. |
| 960 | (sim_create_inferior): Get start address from abfd not prog_bfd. |
| 961 | (xfer_mem): Do bounds checking on addresses and return zero length |
| 962 | read/write on bad addresses, rather than aborting. Prepare to |
| 963 | be able to handle xfers that cross segment boundaries, but not |
| 964 | yet implemented. Only emit debug message when d10v_debug is |
| 965 | set as well as DEBUG being defined. |
| 966 | |
| 967 | Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba> |
| 968 | |
| 969 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 970 | |
| 971 | Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 972 | |
| 973 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 974 | * config.in: Ditto. |
| 975 | |
| 976 | Tue Dec 9 10:28:31 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 977 | |
| 978 | * d10v_sim.h (RPT_S): Index cregs with RPT_S_CR not RPT_E_CR. |
| 979 | (BPSW): Ditto for BPSW_CR and not PSW_CR. |
| 980 | |
| 981 | * simops.c (OP_5F40): JMP to BPC instead of assigning PC directly. |
| 982 | |
| 983 | Mon Dec 8 12:58:33 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 984 | |
| 985 | * simops.c (OP_5F00): From Martin Hunt <hunt@cygnus.com>. Change |
| 986 | reserved trap from 0 to 15. Add trap emulation code for 0-14. |
| 987 | |
| 988 | * interp.c (sim_resume): From Martin Hunt <hunt@cygnus.com>. Check |
| 989 | IBA for SDBT. |
| 990 | |
| 991 | * d10v_sim.h (AE_VECTOR_START, RIE_VECTOR_START, |
| 992 | SDBT_VECTOR_START, TRAP_VECTOR_START): Define. |
| 993 | |
| 994 | * simops.c (OP_5F00): For "trap", mask out all but SM bit in PSW, |
| 995 | use move_to_cr. |
| 996 | (OP_5F00): For "trap", update BPSW with move_to_cr. |
| 997 | |
| 998 | Fri Dec 5 15:31:17 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 999 | |
| 1000 | * d10v_sim.h (enum): Enumerate CR register names. |
| 1001 | (enum): Enumerate PSW bit values. |
| 1002 | (PSW): Obtain value uing move_from_cr. |
| 1003 | (MOD_S, MOD_E, BPSW): Make r-values. |
| 1004 | (move_from_cr, move_to_cr): Declare functions. |
| 1005 | |
| 1006 | * interp.c (sim_fetch_register, sim_store_register): Use |
| 1007 | move_from_cr and move_to_cr for CR register transfers. |
| 1008 | |
| 1009 | * simops.c (move_from_cr, move_to_cr): New functions. |
| 1010 | (OP_5F40): Move BPSW to PSW using move_to_cr and move_from_cr. |
| 1011 | (OP_5600): For "mvtc", use function move_to_cr. |
| 1012 | (OP_5200): For "mvfc", use function move_from_cr. |
| 1013 | |
| 1014 | Fri Dec 5 13:33:14 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1015 | |
| 1016 | * simops.c (OP_5600): For "mvtc" MOD_E and MOD_S, ensure that the |
| 1017 | LSbit is zero. |
| 1018 | |
| 1019 | Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com> |
| 1020 | |
| 1021 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1022 | |
| 1023 | Thu Dec 4 16:51:02 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1024 | |
| 1025 | * d10v_sim.h (struct _state): Add DM - PSW debug mask. |
| 1026 | |
| 1027 | * simops.c (OP_5600): For "mvtc", save PSW.DM. |
| 1028 | (OP_5200): Ditto for "mvfc". |
| 1029 | |
| 1030 | Wed Dec 3 17:27:06 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1031 | |
| 1032 | * d10v_sim.h (SEXT56): Define. |
| 1033 | |
| 1034 | * simops.c (OP_4201): For "rac", sign extend 56 bit value before |
| 1035 | it is shifted. |
| 1036 | |
| 1037 | * d10v_sim.h (MAX32, MIN32, MASK32, MASK40): Re-define using |
| 1038 | SIGNED64 macro. |
| 1039 | |
| 1040 | Tue Dec 2 15:38:34 1997 Fred Fish <fnf@cygnus.com> |
| 1041 | |
| 1042 | * interp.c (sim_resume): Call do_2_short with LEFT_FIRST or |
| 1043 | RIGHT_FIRST, as appropriate, instead of hardcoded ints that |
| 1044 | don't match enum values. |
| 1045 | |
| 1046 | Tue Dec 2 15:01:08 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1047 | |
| 1048 | * simops.c (OP_3A00): For "macu", perform multiply stage using 32 |
| 1049 | bit rather than 16 bit precision. |
| 1050 | (OP_3C00): For "mulxu", store unsigned product in ACC. |
| 1051 | (OP_3800): For "msbu", subtract unsigned product from ACC, |
| 1052 | (OP_0): For "sub", compute carry by comparing inputs. |
| 1053 | |
| 1054 | Tue Dec 2 11:04:37 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1055 | |
| 1056 | * simops.c (OP_1000): For "sub2w", compute carry by comparing |
| 1057 | inputs. |
| 1058 | |
| 1059 | Mon Nov 17 20:57:21 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1060 | |
| 1061 | * simops.c (OP_1): Use 32 bit unsigned arithmetic for subtract, |
| 1062 | carry indicated by value > 0xffff. |
| 1063 | |
| 1064 | Fri Nov 14 12:51:20 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1065 | |
| 1066 | * interp.c (sim_resume): Don't set up SIGINT handler using signal, |
| 1067 | handled by client. |
| 1068 | (sim_resume): Fix race condition of a direct assignment to |
| 1069 | stop_simulator, conditionally call sim_stop. |
| 1070 | (sim_stop_reason): Check stop_simulator returning SIGINT. Clear |
| 1071 | stop_simulator ready for next sim_resume call. |
| 1072 | (sim_ctrl_c): Delete function. |
| 1073 | |
| 1074 | Thu Nov 13 19:29:34 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1075 | |
| 1076 | * interp.c (sim_resume): For "REP", only check/update the PC when |
| 1077 | a branch instruction has not been executed. |
| 1078 | |
| 1079 | Mon Nov 10 17:50:18 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1080 | |
| 1081 | * simops.c (OP_4201): "rachi". Sign extend bit 40 of ACC. Sign |
| 1082 | extend bit 44 all constants. |
| 1083 | (OP_4201): Replace GCC specific 0x..LL with SIGNED64 macro. |
| 1084 | |
| 1085 | Fri Oct 24 10:26:29 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1086 | |
| 1087 | * d10v_sim.h: Include sim-types.h. |
| 1088 | (uint8, in816, uiny16, int32, uint32, int64, uint64): Typedef |
| 1089 | using unsigned8 et.al. from sim-types.h. |
| 1090 | (SEXT32, SEXT40, SEXT44, SEXT60): Replace GCC specific 0x..LL with |
| 1091 | SIGNED64 macro. |
| 1092 | |
| 1093 | Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1094 | |
| 1095 | * interp.c (sim_write_phys): New function, write to physical |
| 1096 | instead of virtual memory. |
| 1097 | |
| 1098 | * interp.c (sim_load): Pass lma_p and sim_write_phys to |
| 1099 | sim_load_file. |
| 1100 | |
| 1101 | Mon Oct 13 10:55:07 1997 Fred Fish <cygnus.com> |
| 1102 | |
| 1103 | * simops.c (OP_6A01): Change OP_POSTDEC to OP_POSTINC and move |
| 1104 | exception generation code to OP_6E01. |
| 1105 | (OP_6E01): Change OP_POSTINC to OP_POSTDEC and insert exception |
| 1106 | generation code. |
| 1107 | |
| 1108 | Sat Oct 11 09:02:08 1997 Fred Fish <fnf@cygnus.com> |
| 1109 | |
| 1110 | * simops.c (OP_6401): postdecrement on r15 is OK, remove exception. |
| 1111 | (OP_6601): Ditto. |
| 1112 | |
| 1113 | Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1114 | |
| 1115 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1116 | |
| 1117 | Sat Sep 27 12:51:34 1997 Fred Fish <fnf@cygnus.com> |
| 1118 | |
| 1119 | * interp.c (pc_addr): Discard upper bit(s) of PC in case |
| 1120 | IMAP1 selects unified memory. |
| 1121 | * d10v_sim.h (INC_ADDR): Align MOD_E to increment before testing |
| 1122 | for end condition. |
| 1123 | |
| 1124 | Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1125 | |
| 1126 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1127 | |
| 1128 | Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1129 | |
| 1130 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1131 | |
| 1132 | Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1133 | |
| 1134 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1135 | |
| 1136 | Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1137 | |
| 1138 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1139 | |
| 1140 | Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1141 | |
| 1142 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1143 | |
| 1144 | Wed Sep 10 22:30:24 1997 Martin M. Hunt <hunt@cygnus.com> |
| 1145 | |
| 1146 | * interp.c (sim_resume): Increment PC at end of rep |
| 1147 | loop. |
| 1148 | |
| 1149 | * simops.c (OP_4201): Fix rachi instruction. |
| 1150 | |
| 1151 | Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba> |
| 1152 | |
| 1153 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1154 | |
| 1155 | Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1156 | |
| 1157 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1158 | * config.in: Ditto. |
| 1159 | |
| 1160 | Tue Aug 26 10:37:49 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1161 | |
| 1162 | * interp.c (sim_kill): Delete. |
| 1163 | (sim_create_inferior): Add ABFD argument. |
| 1164 | (sim_load): Move setting of PC from here. |
| 1165 | (sim_create_inferior): To here. |
| 1166 | (start_address): Delete variable. |
| 1167 | |
| 1168 | Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1169 | |
| 1170 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1171 | * config.in: Ditto. |
| 1172 | |
| 1173 | Mon Aug 25 15:39:29 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1174 | |
| 1175 | * interp.c (sim_open): Add ABFD argument. |
| 1176 | |
| 1177 | Tue May 20 10:14:45 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1178 | |
| 1179 | * interp.c (sim_open): Add callback argument. |
| 1180 | (sim_set_callbacks): Remove SIM_DESC argument. |
| 1181 | |
| 1182 | Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com> |
| 1183 | |
| 1184 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1185 | |
| 1186 | Tue Apr 22 10:29:23 1997 Doug Evans <dje@canuck.cygnus.com> |
| 1187 | |
| 1188 | * interp.c (sim_open): Undo patch to add -E support. |
| 1189 | |
| 1190 | Fri Apr 18 13:39:01 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1191 | |
| 1192 | * interp.c (sim_stop): New function. |
| 1193 | |
| 1194 | Thu Apr 17 02:42:00 1997 Doug Evans <dje@canuck.cygnus.com> |
| 1195 | |
| 1196 | * Makefile.in (SIM_OBJS): Add sim-load.o. |
| 1197 | * d10v_sim.h (exec_bfd): Rename to prog_bfd. |
| 1198 | * interp.c: #include bfd.h. |
| 1199 | (myname, sim_kind, start_address): New static locals. |
| 1200 | (prog_bfd_was_opened_p, prog_bfd): New static locals. |
| 1201 | (decode_pc): Update to use prog_bfd. |
| 1202 | (sim_open): Set sim_kind, myname. Ignore -E arg. |
| 1203 | (sim_close): Close prog_bfd if simulator opened it. |
| 1204 | (sim_create_inferior): Return SIM_RC. Delete arg start_address. |
| 1205 | (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd. |
| 1206 | Call sim_load_file to load file into simulator. |
| 1207 | * simops.c (trace_input_func): exec_bfd renamed to prog_bfd. |
| 1208 | |
| 1209 | Wed Apr 16 16:12:03 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| 1210 | |
| 1211 | * simops.c (OP_5F00): Only provide system calls SYS_execv, |
| 1212 | SYS_wait, SYS_wait, SYS_utime, SYS_time if defined by the host. |
| 1213 | |
| 1214 | Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| 1215 | |
| 1216 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1217 | * config.in: Ditto. |
| 1218 | |
| 1219 | Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com> |
| 1220 | |
| 1221 | * interp.c (sim_open): New arg `kind'. |
| 1222 | |
| 1223 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1224 | |
| 1225 | Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| 1226 | |
| 1227 | * configure: Regenerated to track ../common/aclocal.m4 changes. |
| 1228 | |
| 1229 | Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| 1230 | |
| 1231 | * configure: Re-generate. |
| 1232 | |
| 1233 | Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com> |
| 1234 | |
| 1235 | * configure: Regenerate to track ../common/aclocal.m4 changes. |
| 1236 | |
| 1237 | * simops.c (OP_5F00): Remove old traps 1-3. Make trap 15 the same |
| 1238 | as trap 0, which will be deprecated. Only set errno, if an error |
| 1239 | in fact was returned. |
| 1240 | |
| 1241 | Thu Mar 13 12:41:20 1997 Doug Evans <dje@canuck.cygnus.com> |
| 1242 | |
| 1243 | * interp.c: Delete redundant prototypes of sim_foo fns. |
| 1244 | (sim_open): New SIM_DESC result. Argument is now in argv form. |
| 1245 | (other sim_*): New SIM_DESC argument. |
| 1246 | |
| 1247 | Thu Mar 13 10:29:04 1997 Michael Meissner <meissner@cygnus.com> |
| 1248 | |
| 1249 | * simops.c (trace_{input,output}_func): Call flush_stdout from the |
| 1250 | callback functions. |
| 1251 | (OP_5F00): Ditto. |
| 1252 | (OP_6{4,6,C,A}01): Test for post decrement on the stack pointer. |
| 1253 | (OP_{1200,1000000,201,5FE0,1003,17001002}): Fix problems in |
| 1254 | setting the carry bit after an add or a subtract. |
| 1255 | |
| 1256 | Wed Feb 12 16:04:15 1997 Michael Meissner <meissner@cygnus.com> |
| 1257 | |
| 1258 | * simops.c (OP_{1403,15002A02,3{0,4}0{0,1}}): Only use the bottom |
| 1259 | 40 bits of accumulators. Sign/zero extend as appropriate. |
| 1260 | |
| 1261 | Tue Feb 4 13:33:30 1997 Doug Evans <dje@canuck.cygnus.com> |
| 1262 | |
| 1263 | * Makefile.in (@COMMON_MAKEFILE_FRAG): Use |
| 1264 | COMMON_{PRE,POST}_CONFIG_FRAG instead. |
| 1265 | * configure.in: sinclude ../common/aclocal.m4. |
| 1266 | * configure: Regenerated. |
| 1267 | |
| 1268 | Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com) |
| 1269 | |
| 1270 | * configure configure.in Makefile.in: Update to new configure |
| 1271 | scheme which is more compatible with WinGDB builds. |
| 1272 | * configure.in: Improve comment on how to run autoconf. |
| 1273 | * configure: Re-run autoconf to get new ../common/aclocal.m4. |
| 1274 | * Makefile.in: Use autoconf substitution to install common |
| 1275 | makefile fragment. |
| 1276 | |
| 1277 | Fri Dec 27 22:54:05 1996 Angela Marie Thomas (angela@cygnus.com) |
| 1278 | |
| 1279 | * gencode.c: patch to not #include "d10v_sim.h" which |
| 1280 | unecessarily includes bfd.h and causes wingdb configure |
| 1281 | to fail. |
| 1282 | |
| 1283 | Mon Dec 16 13:39:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1284 | |
| 1285 | * interp.c (xfer_mem): Change unified memory to 0x0. |
| 1286 | |
| 1287 | Thu Nov 28 20:42:56 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1288 | |
| 1289 | * simops.c (OP_3E01): Fix tracing information. |
| 1290 | (OP_300{0,1}): Do not propigate sign. |
| 1291 | |
| 1292 | Mon Nov 25 19:47:40 1996 Doug Evans <dje@canuck.cygnus.com> |
| 1293 | |
| 1294 | * config.in (WORDS_BIGENDIAN): Add. |
| 1295 | * configure: Regenerated. |
| 1296 | * d10v_sim.h: #include "config.h" |
| 1297 | |
| 1298 | Sat Nov 23 09:34:50 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1299 | |
| 1300 | * gencode.c (write_opcodes): Eliminate warnings when generated |
| 1301 | table.c is compiled. |
| 1302 | |
| 1303 | Wed Nov 20 19:41:40 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1304 | |
| 1305 | * interp.c (sim_open): Cast result of calloc, and make sure NULL |
| 1306 | was not returned. |
| 1307 | (dmem_addr): If address is illegal or in I/O space, signal a bus |
| 1308 | error. |
| 1309 | (pc_addr): Signal bus error, not illegal instruction for bogus |
| 1310 | pc. |
| 1311 | |
| 1312 | Wed Nov 20 01:23:03 1996 Doug Evans <dje@canuck.cygnus.com> |
| 1313 | |
| 1314 | * Makefile.in: Delete all stuff moved to ../common/Make-common.in. |
| 1315 | (SIM_OBJS,SIM_EXTRA_CFLAGS,SIM_EXTRA_CLEAN): Define. |
| 1316 | * configure.in: Simplify using macros in ../common/aclocal.m4. |
| 1317 | Call AC_CHECK_HEADERS(unistd.h). |
| 1318 | * configure: Regenerated. |
| 1319 | * config.in: New file. |
| 1320 | * interp.c: #include "callback.h". |
| 1321 | * simops.c: #include "config.h". #include <unistd.h> if present. |
| 1322 | |
| 1323 | Fri Nov 8 16:19:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1324 | |
| 1325 | * d10v-sim.h (simops): Add flag is_long. |
| 1326 | (State): Add pc_changed. Instructions which update the PC should |
| 1327 | use the JMP macro which sets this. |
| 1328 | (JMP): New macro. Sets the PC and the pc_changed flag. |
| 1329 | |
| 1330 | * gencode.c (write_opcodes): Add is_long field. |
| 1331 | |
| 1332 | * interp.c (lookup_hash): If we blindly apply a short opcode's mask |
| 1333 | to a long opcode we could get a false match. Check the opcode size. |
| 1334 | (hash): Add a size field to the hash table. |
| 1335 | (sim_open): Initialize size field in hash table. |
| 1336 | (sim_resume): Change to logic for setting the PC. Used to increment the |
| 1337 | PC if it had not been changed. This didn't allow single-instruction loops. |
| 1338 | Now checks the flag State.pc_changed. Also now stops when ^C is received. |
| 1339 | (dmem_addr): Fix translation of data segments to unified memory. |
| 1340 | (sim_ctrl_c): New function. When ^C is received, set stop_simulator flag. |
| 1341 | |
| 1342 | * simops.c: Changed all branch and jump instructions to use new JMP macro. |
| 1343 | (OP_20000000): Corrected trace information to show this is a ldi.l, not |
| 1344 | a ldi.s instruction. |
| 1345 | |
| 1346 | Thu Oct 31 19:13:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1347 | |
| 1348 | * interp.c (sim_fetch_register, sim_store_register): Fix bug where |
| 1349 | updating the accumulators was overwriting other parts of the global |
| 1350 | State variable. |
| 1351 | |
| 1352 | Wed Oct 30 17:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1353 | |
| 1354 | * interp.c (bfd.h) Don't include it here any more. |
| 1355 | (text{,_start,_end}): Move here from simops.c and make extern. |
| 1356 | (decode_pc): New function to return the PC as an address that the |
| 1357 | debugger can use. |
| 1358 | (dmem_addr): Print decoded PC in error message. |
| 1359 | (pc_addr): Ditto. |
| 1360 | |
| 1361 | * simops.c (bfd.h) Don't include it here any more. |
| 1362 | (text{,_start,_end}): Move to simops.c. |
| 1363 | (trace_input_func): Move decoding of PC, and looking up .text |
| 1364 | start to decode_pc. |
| 1365 | |
| 1366 | * d10v_sim.h (bfd.h): Include it here. |
| 1367 | (text{,_start,_end}): Add external declarations. |
| 1368 | (exec_bfd): Ditto. |
| 1369 | (decode_pc): Ditto. |
| 1370 | |
| 1371 | Tue Oct 29 12:13:52 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1372 | |
| 1373 | * interp.c (sim_size): Now allocates unified memory for imap segments |
| 1374 | 0,1,2, and 127. Initializes imap0 and imap1 to 0x1000. Initializes dmap to 0. |
| 1375 | (sim_write): Just call xfer_mem(). |
| 1376 | (sim_read): Just call xfer_mem(). |
| 1377 | (xfer_mem): New function. Does appropriate memory mapping and copies bytes. |
| 1378 | (dmem_addr): New function. Reads dmap register and translates data |
| 1379 | addresses to local addresses. |
| 1380 | (pc_addr): New function. Reads imap register and computes local address |
| 1381 | corresponding to contents of the PC. |
| 1382 | (sim_resume): Change to use pc_addr(). |
| 1383 | (sim_create_inferior): Change reinitialization code. Also reinitializes |
| 1384 | imap[01] and dmap. |
| 1385 | (sim_fetch_register): Add fake registers 32,33,34 for imap0, imap1, and dmap. |
| 1386 | (sim_store_register): Add fake registers 32,33,34 for imap0, imap1, and dmap. |
| 1387 | |
| 1388 | * simops.c (MEMPTR): Redefine to use dmem_addr(). |
| 1389 | (OP_5F00): Replace references to STate.imem with dmem_addr(). |
| 1390 | |
| 1391 | * d10v-sim.h (State): Remove mem_min and mem_max. Add umem[128]. |
| 1392 | (RB,SW,RW,SLW,RLW): Redefine to use dmem_addr(). |
| 1393 | (IMAP0,IMAP1,DMAP,SET_IMAP,SET_IMAP1,SET_DMAP): Define. |
| 1394 | |
| 1395 | Tue Oct 22 15:22:33 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1396 | |
| 1397 | * d10v_sim.h (_ins_type): Reorganize, so that we can provide |
| 1398 | better statistics, like not counting NOPS as parallel |
| 1399 | instructions, and printing total cycles. |
| 1400 | (ins_type_counters): Make unsigned long. |
| 1401 | (left_nops,right_nops): Fold into ins_type_counters. |
| 1402 | |
| 1403 | * simops.c (trace_input_func): Print new instruction types. |
| 1404 | Handle OP_R2R3 as input types. |
| 1405 | (OP_{38000000,7000}): Correctly sign extend bytes. |
| 1406 | (OP_5E00): Don't count NOPs as parallel instructions. |
| 1407 | (OP_460B): Remove unused variable. |
| 1408 | (OP_5F00): Ditto. |
| 1409 | |
| 1410 | * interp.c (ins_type_counters): Make unsigned long. |
| 1411 | (left_nops,right_nops): Delete. |
| 1412 | (most functions): Add prototypes. |
| 1413 | (INLINE): If GCC and optimize define as __inline__. |
| 1414 | ({,lookup_}hash,get_operands): Declare as INLINE. |
| 1415 | (do_parallel): Count conditional operations. |
| 1416 | (add_commas): New function, to add commas every 3 digits. |
| 1417 | (sim_size): Call add_commas to print numbers. |
| 1418 | (sim_{open,resume}): Delete unused variables. |
| 1419 | (sim_info): Provide better statistics. |
| 1420 | (sim_read): Add int return type. |
| 1421 | |
| 1422 | Mon Oct 21 16:16:26 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1423 | |
| 1424 | * interp.c (sim_resume): Change the way single-stepping and exceptions |
| 1425 | are handled so single-stepping works again. |
| 1426 | |
| 1427 | Thu Oct 17 12:24:16 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1428 | |
| 1429 | * endian.c: Optimize simulated loads/stores on x86, AIX, and big |
| 1430 | endian hosts. |
| 1431 | |
| 1432 | * configure.in (--enable-sim-bswap): New switch to enable using |
| 1433 | the BSWAP instruction on x86's. |
| 1434 | * configure: Regenerate. |
| 1435 | |
| 1436 | * Makefile.in ({SWAP,CONFIG}_CFLAGS): Add --enable-sim-bswap |
| 1437 | support. |
| 1438 | |
| 1439 | Wed Oct 16 13:50:06 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1440 | |
| 1441 | * endian.c: New file. Move endian functions here from interp.c. |
| 1442 | Optimize code, and make it work as either inline functions or as a |
| 1443 | separate file. |
| 1444 | |
| 1445 | * interp.c: Move endian functions from here to endian.c. |
| 1446 | |
| 1447 | * Makefile.in (INCLUDE): Add endian.c. |
| 1448 | (run,libsim.a): Add dependency on endian.o. |
| 1449 | (endian.o): Add dependency. |
| 1450 | |
| 1451 | * d10v_sim.h (read/write support): Always go through the machine |
| 1452 | independent endian functions. If compiling with GCC and |
| 1453 | optimizing, include endian.c so the endian functions are inlined. |
| 1454 | |
| 1455 | * simops.c (OP_5F00): Correct tracing of accumulators. |
| 1456 | |
| 1457 | Tue Oct 15 10:57:50 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1458 | |
| 1459 | * simops.c (OP_5F00): Add support for getpid, kill system calls. |
| 1460 | |
| 1461 | * interp.c (do_{2_short,parallel}): If an exception is raised, |
| 1462 | don't execute the second instruction. |
| 1463 | |
| 1464 | Sat Oct 12 22:17:43 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1465 | |
| 1466 | * simops.c (OP_{31000000,6601,6201,6200}): Store address in a |
| 1467 | temporary in case the register is overriden when loading. |
| 1468 | (OP_6200): Output type is OP_DREG for tracing. |
| 1469 | |
| 1470 | Fri Oct 4 23:46:18 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1471 | |
| 1472 | * d10v_sim.h (struct _state): Add mem_{min,max} fields. |
| 1473 | |
| 1474 | * interp.c (sim_size): Initialize mem_{min,max} fields. |
| 1475 | (sim_write): Update mem_{min,max} fields. |
| 1476 | (sim_resume): If PC is not in the minimum/maximum memory range, |
| 1477 | abort. |
| 1478 | (sim_create_inferior): Preserve mem_{min,max} fields. |
| 1479 | |
| 1480 | Fri Sep 27 13:11:58 1996 Mark Alexander <marka@cygnus.com> |
| 1481 | |
| 1482 | * simops.c (OP_5F00): Add support for time() system call. |
| 1483 | |
| 1484 | Wed Sep 25 16:31:41 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1485 | |
| 1486 | * simops.c (OP_{6E01,6A01,6E1F,6A00}): Print both words being |
| 1487 | stored if tracing. |
| 1488 | (OP_5F00,trace_{in,out}put_func): Add finer grain tracing for |
| 1489 | system calls. |
| 1490 | |
| 1491 | Mon Sep 23 17:55:30 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1492 | |
| 1493 | * simops.c (op_types): Add OP_{CONSTANT8,R2,R3}. |
| 1494 | (trace_input_func): Add support for OP_{CONSTANT8,R2,R3}. |
| 1495 | (OP_{4900,24800000,4800,4A00,4B00,4D00,4C00}): Add OP_R2 and OP_R3 |
| 1496 | to call/subroutine returns to trace the first two arguments and |
| 1497 | the return value. For small jumps, use CONSTANT8, not CONSTANT16. |
| 1498 | |
| 1499 | Fri Sep 20 15:36:45 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1500 | |
| 1501 | * interp.c (sim_create_inferior): Reinitialize State every time |
| 1502 | sim_create_inferior() is called. |
| 1503 | |
| 1504 | Thu Sep 19 21:38:20 1996 Michael Meissner <meissner@wogglebug.ziplink.net> |
| 1505 | |
| 1506 | * simops.c (OP_{401,2000000,601,3000000,23000000}): Get sign right |
| 1507 | on comparisons. |
| 1508 | (OP_401): Fix tracing information. |
| 1509 | |
| 1510 | Thu Sep 19 10:30:22 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1511 | |
| 1512 | * simops.c (SIZE_{PC,LINE_NUMBER}): New default sizes for output. |
| 1513 | (trace_input_func): Use them. |
| 1514 | (trace_input_func): Make sure there is a trailing space after the |
| 1515 | instruction. |
| 1516 | (OP_6200): Fix tracing info. |
| 1517 | |
| 1518 | * Makefile.in (run): Add dependencies on libbfd.a and |
| 1519 | libiberity.a. |
| 1520 | |
| 1521 | Wed Sep 18 09:13:25 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1522 | |
| 1523 | * d10v_sim.h (DEBUG_INSTRUCTION): New debug value to include line |
| 1524 | numbers and function names in debug trace. |
| 1525 | (DEBUG): If not defined, set to DEBUG_TRACE, DEBUG_VALUES, and |
| 1526 | DEBUG_LINE_NUMBER. |
| 1527 | (SIG_D10V_{STOP,EXIT}): Values to represent the stop instruction |
| 1528 | and exit system call trap being executed. |
| 1529 | |
| 1530 | * interp.c (sim_stop_reason): Set exit code correctly for stop |
| 1531 | instruction and exit system call trap. |
| 1532 | |
| 1533 | * configure.in (--enable-sim-cflags): Remove trace case. |
| 1534 | (--enable-sim-debug): New switch to set the debug values. |
| 1535 | * configure: Regenerate. |
| 1536 | |
| 1537 | * simops.c (trace_{input,output}_func): Rename from |
| 1538 | trace_{input,output}. |
| 1539 | (trace_{input,output}): Call trace_{input,output}_func if |
| 1540 | d10v_debug is non-zero. |
| 1541 | (SIZE_INSTRUCTION): Cut down to 8. |
| 1542 | (SIZE_OPERANDS): Cut down to 18. |
| 1543 | (SIZE_LOCATION): New value for size of line number, function name |
| 1544 | field. |
| 1545 | (init_text_p,text{,_start,_end}): New static variables for |
| 1546 | printing line number and function name. |
| 1547 | (exec_bfd): New external that run.c sets. |
| 1548 | (trace_input_func): Print line number and function name if |
| 1549 | available and if desired. |
| 1550 | (OP_4E09): Don't print out DBT message. |
| 1551 | (OP_5FE0): Set exception field to SIG_D10V_STOP. |
| 1552 | (OP_5F00): Set exception field to SIG_D10V_EXIT. |
| 1553 | |
| 1554 | Sat Sep 14 22:18:43 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1555 | |
| 1556 | * interp.c (do_2_short): If the instruction encodes jump->ins, |
| 1557 | don't do the second instruction if the jump succeeds. |
| 1558 | |
| 1559 | Fri Sep 13 22:35:19 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1560 | |
| 1561 | * simops.c (OP_5F00): Use unknown traps to print all GPRs, |
| 1562 | accumulators, PC, and F0/F1/C flags. |
| 1563 | |
| 1564 | Thu Sep 12 12:50:11 1996 Mark Alexander <marka@cygnus.com> |
| 1565 | |
| 1566 | * simops.c (OP_5F00): Fix problems with system calls. |
| 1567 | |
| 1568 | Thu Sep 12 12:19:28 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1569 | |
| 1570 | * simops.c (OP_5F00): Correct tracing information for trap. |
| 1571 | |
| 1572 | Wed Sep 11 18:55:50 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1573 | |
| 1574 | * Makefile.in (CSEARCH): Correctly find opcodes directory. |
| 1575 | |
| 1576 | Mon Sep 9 13:27:26 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1577 | |
| 1578 | * simops.c (trace_output): Properly align accumulator output. |
| 1579 | (OP_3{0,2,4}00): Properly parenthesize test expression. Add error |
| 1580 | if shift count is too high. |
| 1581 | (OP_4E{00,02,04,20,22,40,42}): Make tests agree with book. |
| 1582 | (OP_4E09): Make cpfg properly trace the input flags. |
| 1583 | (op_types): Add OP_FLAG_OUTPUT. |
| 1584 | (trace_{input,output}): Support OP_FLAG_OUTPUT. |
| 1585 | (OP_31000000): This ld2w varient is a 16-bit memory reference, not |
| 1586 | an 8-bit memory reference instruction for tracing purposes. |
| 1587 | (OP_201): Addi needs to set the carry. |
| 1588 | |
| 1589 | Fri Sep 6 17:56:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1590 | |
| 1591 | * simops.c (OP_2600, OP_2601): Changed min and max comparisons |
| 1592 | to use signed register values. |
| 1593 | |
| 1594 | Wed Sep 4 11:35:17 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1595 | |
| 1596 | * d10v_sim.h (DEBUG_*): Add bit flags for controlling debug |
| 1597 | output. |
| 1598 | (_ins_type): New enumeration to specify which container an |
| 1599 | instruction is in, and whether it is part of a parallel operation. |
| 1600 | (_state): Add ins_type field. |
| 1601 | ({,u}int{8,16,32,64}): Use limits.h to size the appropriate types. |
| 1602 | (ins_type_counters): Counters for the various instruction types. |
| 1603 | ({left,right}_nops): Counters for the number of nops in each |
| 1604 | container. |
| 1605 | (d10v_debug): New variable to indicate whether debugging is turned |
| 1606 | on. |
| 1607 | |
| 1608 | * simops.c: (all functions): Change all #ifdef DEBUG code so that |
| 1609 | the input and output values can be traced, along with the |
| 1610 | instruction type. Make the -t option enable tracing. |
| 1611 | (all functions): Change printf calls to use the printf_filtered |
| 1612 | function in the callback table. |
| 1613 | |
| 1614 | * interp.c (_leftright): New enumeration to say whether 2 short |
| 1615 | instructions are done left first or right first. |
| 1616 | (do_{long,2_short,parallel}): Indicate in the machine state which |
| 1617 | type of instruction this is. Count each of the types of |
| 1618 | instructions executed. |
| 1619 | (sim_size): Only print the memory sizes if DEBUG_MEMSIZE debug |
| 1620 | flag is set. |
| 1621 | (sim_resume): Pass left/right indication to do_2_short. |
| 1622 | (all functions): Change printf calls to use the printf_filtered |
| 1623 | function in the callback table. |
| 1624 | (sim_trace): Turn on debug flag if DEBUG was defined, and call |
| 1625 | sim_resume. |
| 1626 | (sim_info): Print out statistics on instructions. |
| 1627 | (sim_{trace,create_inferior}): Eliminate extraneous output unless |
| 1628 | debugging. |
| 1629 | (sim_open): If args == -t and DEBUG was defined, set d10v_debug. |
| 1630 | Only initialize the hash table the first time sim_open is called. |
| 1631 | |
| 1632 | * Makefile.in: Make objects depend on d10v_sim.h. |
| 1633 | ({,SIM_}CFLAGS): Include configure dependent switches. Setting |
| 1634 | CFLAGS does not override host/target defines or SIM_CFLAGS. |
| 1635 | (CC_FOR_BUILD,gencode): Use CC_FOR_BUILD to compile gencode. |
| 1636 | (run): By default, the math library is not needed to be linked |
| 1637 | in. |
| 1638 | ({BFD,LIBIBERTY}_LIB): Define as variables so they can be |
| 1639 | overridden. |
| 1640 | (VPATH): Don't set to anything but @srcdir@ to work with non-GNU |
| 1641 | makes. |
| 1642 | ({run,callback}.o): Provide explicit paths to their appropriate |
| 1643 | source directories. |
| 1644 | (gencode{,.o},d10v-opc.o): Split compilation into creating object |
| 1645 | and linking. Instead of linking in libopcodes.a, just compile |
| 1646 | d10v-opc.o directly to handle canadian cross. |
| 1647 | (CSEARCH): Add opcodes directory. |
| 1648 | |
| 1649 | * configure.in (--enable-sim-cflags): New switch to allow user to |
| 1650 | set the defaults. |
| 1651 | (CC_FOR_BUILD): Deal with canadian crosses. |
| 1652 | * configure: Regenerate. |
| 1653 | |
| 1654 | Wed Sep 04 04:45:34 1996 Mark Alexander <marka@cygnus.com> |
| 1655 | |
| 1656 | * simops.c: Include correct syscall.h for d10v, not host's. |
| 1657 | Fix #ifdef SYS_stat. |
| 1658 | |
| 1659 | Tue Sep 3 14:00:04 1996 Michael Meissner <meissner@tiktok.cygnus.com> |
| 1660 | |
| 1661 | * simops.c (OP_5F00): Wrap all SYS_xxx traps with #ifdef. |
| 1662 | Add trap 2 to be printf and trap 3 to be putchar. |
| 1663 | |
| 1664 | Wed Aug 28 21:42:34 1996 Mark Alexander <marka@cygnus.com> |
| 1665 | |
| 1666 | * Makefile.in, d10v_sim.h, interp.c, simops.c: Add support |
| 1667 | for low-level system calls. |
| 1668 | |
| 1669 | Wed Aug 28 17:33:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1670 | |
| 1671 | * Makefile.in, d10v_sim.h, interp.c: Fix byte-order problems. |
| 1672 | |
| 1673 | Mon Aug 26 18:30:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1674 | |
| 1675 | * d10v_sim.h (SEXT32): Added. |
| 1676 | * interp.c: Commented out printfs. |
| 1677 | * simops.c: Fixed error in sb and st2w. |
| 1678 | |
| 1679 | Thu Aug 15 13:30:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1680 | |
| 1681 | * Makefile.in, d10v_sim.h, interp.c, simops.c: Added remaining |
| 1682 | DSP instructions. Added modulo addressing. |
| 1683 | |
| 1684 | Sun Aug 11 12:57:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1685 | |
| 1686 | * Makefile.in, d10v_sim.h, interp.c, simops.c: Snapshot. |
| 1687 | |
| 1688 | Fri Aug 2 17:44:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1689 | |
| 1690 | * d10v_sim.h, simops.c: Snapshot. |
| 1691 | |
| 1692 | Thu Aug 1 17:05:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com> |
| 1693 | |
| 1694 | * ChangeLog, Makefile.in, configure, configure.in, d10v_sim.h, |
| 1695 | gencode.c, interp.c, simops.c: Created. |
| 1696 | |