| 1 | #include <signal.h> |
| 2 | #include "sysdep.h" |
| 3 | #include "bfd.h" |
| 4 | #include "gdb/callback.h" |
| 5 | #include "gdb/remote-sim.h" |
| 6 | |
| 7 | #include "d10v_sim.h" |
| 8 | #include "gdb/sim-d10v.h" |
| 9 | |
| 10 | enum _leftright { LEFT_FIRST, RIGHT_FIRST }; |
| 11 | |
| 12 | static char *myname; |
| 13 | static SIM_OPEN_KIND sim_kind; |
| 14 | int d10v_debug; |
| 15 | |
| 16 | /* Set this to true to get the previous segment layout. */ |
| 17 | |
| 18 | int old_segment_mapping; |
| 19 | |
| 20 | host_callback *d10v_callback; |
| 21 | unsigned long ins_type_counters[ (int)INS_MAX ]; |
| 22 | |
| 23 | uint16 OP[4]; |
| 24 | |
| 25 | static int init_text_p = 0; |
| 26 | /* non-zero if we opened prog_bfd */ |
| 27 | static int prog_bfd_was_opened_p; |
| 28 | bfd *prog_bfd; |
| 29 | asection *text; |
| 30 | bfd_vma text_start; |
| 31 | bfd_vma text_end; |
| 32 | |
| 33 | static long hash PARAMS ((long insn, int format)); |
| 34 | static struct hash_entry *lookup_hash PARAMS ((uint32 ins, int size)); |
| 35 | static void get_operands PARAMS ((struct simops *s, uint32 ins)); |
| 36 | static void do_long PARAMS ((uint32 ins)); |
| 37 | static void do_2_short PARAMS ((uint16 ins1, uint16 ins2, enum _leftright leftright)); |
| 38 | static void do_parallel PARAMS ((uint16 ins1, uint16 ins2)); |
| 39 | static char *add_commas PARAMS ((char *buf, int sizeof_buf, unsigned long value)); |
| 40 | extern void sim_set_profile PARAMS ((int n)); |
| 41 | extern void sim_set_profile_size PARAMS ((int n)); |
| 42 | static INLINE uint8 *map_memory (unsigned phys_addr); |
| 43 | |
| 44 | #ifdef NEED_UI_LOOP_HOOK |
| 45 | /* How often to run the ui_loop update, when in use */ |
| 46 | #define UI_LOOP_POLL_INTERVAL 0x14000 |
| 47 | |
| 48 | /* Counter for the ui_loop_hook update */ |
| 49 | static long ui_loop_hook_counter = UI_LOOP_POLL_INTERVAL; |
| 50 | |
| 51 | /* Actual hook to call to run through gdb's gui event loop */ |
| 52 | extern int (*ui_loop_hook) PARAMS ((int signo)); |
| 53 | #endif /* NEED_UI_LOOP_HOOK */ |
| 54 | |
| 55 | #ifndef INLINE |
| 56 | #if defined(__GNUC__) && defined(__OPTIMIZE__) |
| 57 | #define INLINE __inline__ |
| 58 | #else |
| 59 | #define INLINE |
| 60 | #endif |
| 61 | #endif |
| 62 | |
| 63 | #define MAX_HASH 63 |
| 64 | struct hash_entry |
| 65 | { |
| 66 | struct hash_entry *next; |
| 67 | uint32 opcode; |
| 68 | uint32 mask; |
| 69 | int size; |
| 70 | struct simops *ops; |
| 71 | }; |
| 72 | |
| 73 | struct hash_entry hash_table[MAX_HASH+1]; |
| 74 | |
| 75 | INLINE static long |
| 76 | hash(insn, format) |
| 77 | long insn; |
| 78 | int format; |
| 79 | { |
| 80 | if (format & LONG_OPCODE) |
| 81 | return ((insn & 0x3F000000) >> 24); |
| 82 | else |
| 83 | return((insn & 0x7E00) >> 9); |
| 84 | } |
| 85 | |
| 86 | INLINE static struct hash_entry * |
| 87 | lookup_hash (ins, size) |
| 88 | uint32 ins; |
| 89 | int size; |
| 90 | { |
| 91 | struct hash_entry *h; |
| 92 | |
| 93 | if (size) |
| 94 | h = &hash_table[(ins & 0x3F000000) >> 24]; |
| 95 | else |
| 96 | h = &hash_table[(ins & 0x7E00) >> 9]; |
| 97 | |
| 98 | while ((ins & h->mask) != h->opcode || h->size != size) |
| 99 | { |
| 100 | if (h->next == NULL) |
| 101 | { |
| 102 | State.exception = SIGILL; |
| 103 | State.pc_changed = 1; /* Don't increment the PC. */ |
| 104 | return NULL; |
| 105 | } |
| 106 | h = h->next; |
| 107 | } |
| 108 | return (h); |
| 109 | } |
| 110 | |
| 111 | INLINE static void |
| 112 | get_operands (struct simops *s, uint32 ins) |
| 113 | { |
| 114 | int i, shift, bits, flags; |
| 115 | uint32 mask; |
| 116 | for (i=0; i < s->numops; i++) |
| 117 | { |
| 118 | shift = s->operands[3*i]; |
| 119 | bits = s->operands[3*i+1]; |
| 120 | flags = s->operands[3*i+2]; |
| 121 | mask = 0x7FFFFFFF >> (31 - bits); |
| 122 | OP[i] = (ins >> shift) & mask; |
| 123 | } |
| 124 | /* FIXME: for tracing, update values that need to be updated each |
| 125 | instruction decode cycle */ |
| 126 | State.trace.psw = PSW; |
| 127 | } |
| 128 | |
| 129 | bfd_vma |
| 130 | decode_pc () |
| 131 | { |
| 132 | asection *s; |
| 133 | if (!init_text_p && prog_bfd != NULL) |
| 134 | { |
| 135 | init_text_p = 1; |
| 136 | for (s = prog_bfd->sections; s; s = s->next) |
| 137 | if (strcmp (bfd_get_section_name (prog_bfd, s), ".text") == 0) |
| 138 | { |
| 139 | text = s; |
| 140 | text_start = bfd_get_section_vma (prog_bfd, s); |
| 141 | text_end = text_start + bfd_section_size (prog_bfd, s); |
| 142 | break; |
| 143 | } |
| 144 | } |
| 145 | |
| 146 | return (PC << 2) + text_start; |
| 147 | } |
| 148 | |
| 149 | static void |
| 150 | do_long (ins) |
| 151 | uint32 ins; |
| 152 | { |
| 153 | struct hash_entry *h; |
| 154 | #ifdef DEBUG |
| 155 | if ((d10v_debug & DEBUG_INSTRUCTION) != 0) |
| 156 | (*d10v_callback->printf_filtered) (d10v_callback, "do_long 0x%x\n", ins); |
| 157 | #endif |
| 158 | h = lookup_hash (ins, 1); |
| 159 | if (h == NULL) |
| 160 | return; |
| 161 | get_operands (h->ops, ins); |
| 162 | State.ins_type = INS_LONG; |
| 163 | ins_type_counters[ (int)State.ins_type ]++; |
| 164 | (h->ops->func)(); |
| 165 | } |
| 166 | |
| 167 | static void |
| 168 | do_2_short (ins1, ins2, leftright) |
| 169 | uint16 ins1, ins2; |
| 170 | enum _leftright leftright; |
| 171 | { |
| 172 | struct hash_entry *h; |
| 173 | enum _ins_type first, second; |
| 174 | |
| 175 | #ifdef DEBUG |
| 176 | if ((d10v_debug & DEBUG_INSTRUCTION) != 0) |
| 177 | (*d10v_callback->printf_filtered) (d10v_callback, "do_2_short 0x%x (%s) -> 0x%x\n", |
| 178 | ins1, (leftright) ? "left" : "right", ins2); |
| 179 | #endif |
| 180 | |
| 181 | if (leftright == LEFT_FIRST) |
| 182 | { |
| 183 | first = INS_LEFT; |
| 184 | second = INS_RIGHT; |
| 185 | ins_type_counters[ (int)INS_LEFTRIGHT ]++; |
| 186 | } |
| 187 | else |
| 188 | { |
| 189 | first = INS_RIGHT; |
| 190 | second = INS_LEFT; |
| 191 | ins_type_counters[ (int)INS_RIGHTLEFT ]++; |
| 192 | } |
| 193 | |
| 194 | /* Issue the first instruction */ |
| 195 | h = lookup_hash (ins1, 0); |
| 196 | if (h == NULL) |
| 197 | return; |
| 198 | get_operands (h->ops, ins1); |
| 199 | State.ins_type = first; |
| 200 | ins_type_counters[ (int)State.ins_type ]++; |
| 201 | (h->ops->func)(); |
| 202 | |
| 203 | /* Issue the second instruction (if the PC hasn't changed) */ |
| 204 | if (!State.pc_changed && !State.exception) |
| 205 | { |
| 206 | /* finish any existing instructions */ |
| 207 | SLOT_FLUSH (); |
| 208 | h = lookup_hash (ins2, 0); |
| 209 | if (h == NULL) |
| 210 | return; |
| 211 | get_operands (h->ops, ins2); |
| 212 | State.ins_type = second; |
| 213 | ins_type_counters[ (int)State.ins_type ]++; |
| 214 | ins_type_counters[ (int)INS_CYCLES ]++; |
| 215 | (h->ops->func)(); |
| 216 | } |
| 217 | else if (!State.exception) |
| 218 | ins_type_counters[ (int)INS_COND_JUMP ]++; |
| 219 | } |
| 220 | |
| 221 | static void |
| 222 | do_parallel (ins1, ins2) |
| 223 | uint16 ins1, ins2; |
| 224 | { |
| 225 | struct hash_entry *h1, *h2; |
| 226 | #ifdef DEBUG |
| 227 | if ((d10v_debug & DEBUG_INSTRUCTION) != 0) |
| 228 | (*d10v_callback->printf_filtered) (d10v_callback, "do_parallel 0x%x || 0x%x\n", ins1, ins2); |
| 229 | #endif |
| 230 | ins_type_counters[ (int)INS_PARALLEL ]++; |
| 231 | h1 = lookup_hash (ins1, 0); |
| 232 | if (h1 == NULL) |
| 233 | return; |
| 234 | h2 = lookup_hash (ins2, 0); |
| 235 | if (h2 == NULL) |
| 236 | return; |
| 237 | |
| 238 | if (h1->ops->exec_type == PARONLY) |
| 239 | { |
| 240 | get_operands (h1->ops, ins1); |
| 241 | State.ins_type = INS_LEFT_COND_TEST; |
| 242 | ins_type_counters[ (int)State.ins_type ]++; |
| 243 | (h1->ops->func)(); |
| 244 | if (State.exe) |
| 245 | { |
| 246 | ins_type_counters[ (int)INS_COND_TRUE ]++; |
| 247 | get_operands (h2->ops, ins2); |
| 248 | State.ins_type = INS_RIGHT_COND_EXE; |
| 249 | ins_type_counters[ (int)State.ins_type ]++; |
| 250 | (h2->ops->func)(); |
| 251 | } |
| 252 | else |
| 253 | ins_type_counters[ (int)INS_COND_FALSE ]++; |
| 254 | } |
| 255 | else if (h2->ops->exec_type == PARONLY) |
| 256 | { |
| 257 | get_operands (h2->ops, ins2); |
| 258 | State.ins_type = INS_RIGHT_COND_TEST; |
| 259 | ins_type_counters[ (int)State.ins_type ]++; |
| 260 | (h2->ops->func)(); |
| 261 | if (State.exe) |
| 262 | { |
| 263 | ins_type_counters[ (int)INS_COND_TRUE ]++; |
| 264 | get_operands (h1->ops, ins1); |
| 265 | State.ins_type = INS_LEFT_COND_EXE; |
| 266 | ins_type_counters[ (int)State.ins_type ]++; |
| 267 | (h1->ops->func)(); |
| 268 | } |
| 269 | else |
| 270 | ins_type_counters[ (int)INS_COND_FALSE ]++; |
| 271 | } |
| 272 | else |
| 273 | { |
| 274 | get_operands (h1->ops, ins1); |
| 275 | State.ins_type = INS_LEFT_PARALLEL; |
| 276 | ins_type_counters[ (int)State.ins_type ]++; |
| 277 | (h1->ops->func)(); |
| 278 | if (!State.exception) |
| 279 | { |
| 280 | get_operands (h2->ops, ins2); |
| 281 | State.ins_type = INS_RIGHT_PARALLEL; |
| 282 | ins_type_counters[ (int)State.ins_type ]++; |
| 283 | (h2->ops->func)(); |
| 284 | } |
| 285 | } |
| 286 | } |
| 287 | |
| 288 | static char * |
| 289 | add_commas(buf, sizeof_buf, value) |
| 290 | char *buf; |
| 291 | int sizeof_buf; |
| 292 | unsigned long value; |
| 293 | { |
| 294 | int comma = 3; |
| 295 | char *endbuf = buf + sizeof_buf - 1; |
| 296 | |
| 297 | *--endbuf = '\0'; |
| 298 | do { |
| 299 | if (comma-- == 0) |
| 300 | { |
| 301 | *--endbuf = ','; |
| 302 | comma = 2; |
| 303 | } |
| 304 | |
| 305 | *--endbuf = (value % 10) + '0'; |
| 306 | } while ((value /= 10) != 0); |
| 307 | |
| 308 | return endbuf; |
| 309 | } |
| 310 | |
| 311 | void |
| 312 | sim_size (power) |
| 313 | int power; |
| 314 | |
| 315 | { |
| 316 | int i; |
| 317 | for (i = 0; i < IMEM_SEGMENTS; i++) |
| 318 | { |
| 319 | if (State.mem.insn[i]) |
| 320 | free (State.mem.insn[i]); |
| 321 | } |
| 322 | for (i = 0; i < DMEM_SEGMENTS; i++) |
| 323 | { |
| 324 | if (State.mem.data[i]) |
| 325 | free (State.mem.data[i]); |
| 326 | } |
| 327 | for (i = 0; i < UMEM_SEGMENTS; i++) |
| 328 | { |
| 329 | if (State.mem.unif[i]) |
| 330 | free (State.mem.unif[i]); |
| 331 | } |
| 332 | /* Always allocate dmem segment 0. This contains the IMAP and DMAP |
| 333 | registers. */ |
| 334 | State.mem.data[0] = calloc (1, SEGMENT_SIZE); |
| 335 | } |
| 336 | |
| 337 | /* For tracing - leave info on last access around. */ |
| 338 | static char *last_segname = "invalid"; |
| 339 | static char *last_from = "invalid"; |
| 340 | static char *last_to = "invalid"; |
| 341 | |
| 342 | enum |
| 343 | { |
| 344 | IMAP0_OFFSET = 0xff00, |
| 345 | DMAP0_OFFSET = 0xff08, |
| 346 | DMAP2_SHADDOW = 0xff04, |
| 347 | DMAP2_OFFSET = 0xff0c |
| 348 | }; |
| 349 | |
| 350 | static void |
| 351 | set_dmap_register (int reg_nr, unsigned long value) |
| 352 | { |
| 353 | uint8 *raw = map_memory (SIM_D10V_MEMORY_DATA |
| 354 | + DMAP0_OFFSET + 2 * reg_nr); |
| 355 | WRITE_16 (raw, value); |
| 356 | #ifdef DEBUG |
| 357 | if ((d10v_debug & DEBUG_MEMORY)) |
| 358 | { |
| 359 | (*d10v_callback->printf_filtered) |
| 360 | (d10v_callback, "mem: dmap%d=0x%04lx\n", reg_nr, value); |
| 361 | } |
| 362 | #endif |
| 363 | } |
| 364 | |
| 365 | static unsigned long |
| 366 | dmap_register (int reg_nr) |
| 367 | { |
| 368 | uint8 *raw = map_memory (SIM_D10V_MEMORY_DATA |
| 369 | + DMAP0_OFFSET + 2 * reg_nr); |
| 370 | return READ_16 (raw); |
| 371 | } |
| 372 | |
| 373 | static void |
| 374 | set_imap_register (int reg_nr, unsigned long value) |
| 375 | { |
| 376 | uint8 *raw = map_memory (SIM_D10V_MEMORY_DATA |
| 377 | + IMAP0_OFFSET + 2 * reg_nr); |
| 378 | WRITE_16 (raw, value); |
| 379 | #ifdef DEBUG |
| 380 | if ((d10v_debug & DEBUG_MEMORY)) |
| 381 | { |
| 382 | (*d10v_callback->printf_filtered) |
| 383 | (d10v_callback, "mem: imap%d=0x%04lx\n", reg_nr, value); |
| 384 | } |
| 385 | #endif |
| 386 | } |
| 387 | |
| 388 | static unsigned long |
| 389 | imap_register (int reg_nr) |
| 390 | { |
| 391 | uint8 *raw = map_memory (SIM_D10V_MEMORY_DATA |
| 392 | + IMAP0_OFFSET + 2 * reg_nr); |
| 393 | return READ_16 (raw); |
| 394 | } |
| 395 | |
| 396 | enum |
| 397 | { |
| 398 | HELD_SPI_IDX = 0, |
| 399 | HELD_SPU_IDX = 1 |
| 400 | }; |
| 401 | |
| 402 | static unsigned long |
| 403 | spu_register (void) |
| 404 | { |
| 405 | if (PSW_SM) |
| 406 | return GPR (SP_IDX); |
| 407 | else |
| 408 | return HELD_SP (HELD_SPU_IDX); |
| 409 | } |
| 410 | |
| 411 | static unsigned long |
| 412 | spi_register (void) |
| 413 | { |
| 414 | if (!PSW_SM) |
| 415 | return GPR (SP_IDX); |
| 416 | else |
| 417 | return HELD_SP (HELD_SPI_IDX); |
| 418 | } |
| 419 | |
| 420 | static void |
| 421 | set_spi_register (unsigned long value) |
| 422 | { |
| 423 | if (!PSW_SM) |
| 424 | SET_GPR (SP_IDX, value); |
| 425 | SET_HELD_SP (HELD_SPI_IDX, value); |
| 426 | } |
| 427 | |
| 428 | static void |
| 429 | set_spu_register (unsigned long value) |
| 430 | { |
| 431 | if (PSW_SM) |
| 432 | SET_GPR (SP_IDX, value); |
| 433 | SET_HELD_SP (HELD_SPU_IDX, value); |
| 434 | } |
| 435 | |
| 436 | /* Given a virtual address in the DMAP address space, translate it |
| 437 | into a physical address. */ |
| 438 | |
| 439 | unsigned long |
| 440 | sim_d10v_translate_dmap_addr (unsigned long offset, |
| 441 | int nr_bytes, |
| 442 | unsigned long *phys, |
| 443 | unsigned long (*dmap_register) (int reg_nr)) |
| 444 | { |
| 445 | short map; |
| 446 | int regno; |
| 447 | last_from = "logical-data"; |
| 448 | if (offset >= DMAP_BLOCK_SIZE * SIM_D10V_NR_DMAP_REGS) |
| 449 | { |
| 450 | /* Logical address out side of data segments, not supported */ |
| 451 | return 0; |
| 452 | } |
| 453 | regno = (offset / DMAP_BLOCK_SIZE); |
| 454 | offset = (offset % DMAP_BLOCK_SIZE); |
| 455 | if ((offset % DMAP_BLOCK_SIZE) + nr_bytes > DMAP_BLOCK_SIZE) |
| 456 | { |
| 457 | /* Don't cross a BLOCK boundary */ |
| 458 | nr_bytes = DMAP_BLOCK_SIZE - (offset % DMAP_BLOCK_SIZE); |
| 459 | } |
| 460 | map = dmap_register (regno); |
| 461 | if (regno == 3) |
| 462 | { |
| 463 | /* Always maps to data memory */ |
| 464 | int iospi = (offset / 0x1000) % 4; |
| 465 | int iosp = (map >> (4 * (3 - iospi))) % 0x10; |
| 466 | last_to = "io-space"; |
| 467 | *phys = (SIM_D10V_MEMORY_DATA + (iosp * 0x10000) + 0xc000 + offset); |
| 468 | } |
| 469 | else |
| 470 | { |
| 471 | int sp = ((map & 0x3000) >> 12); |
| 472 | int segno = (map & 0x3ff); |
| 473 | switch (sp) |
| 474 | { |
| 475 | case 0: /* 00: Unified memory */ |
| 476 | *phys = SIM_D10V_MEMORY_UNIFIED + (segno * DMAP_BLOCK_SIZE) + offset; |
| 477 | last_to = "unified"; |
| 478 | break; |
| 479 | case 1: /* 01: Instruction Memory */ |
| 480 | *phys = SIM_D10V_MEMORY_INSN + (segno * DMAP_BLOCK_SIZE) + offset; |
| 481 | last_to = "chip-insn"; |
| 482 | break; |
| 483 | case 2: /* 10: Internal data memory */ |
| 484 | *phys = SIM_D10V_MEMORY_DATA + (segno << 16) + (regno * DMAP_BLOCK_SIZE) + offset; |
| 485 | last_to = "chip-data"; |
| 486 | break; |
| 487 | case 3: /* 11: Reserved */ |
| 488 | return 0; |
| 489 | } |
| 490 | } |
| 491 | return nr_bytes; |
| 492 | } |
| 493 | |
| 494 | /* Given a virtual address in the IMAP address space, translate it |
| 495 | into a physical address. */ |
| 496 | |
| 497 | unsigned long |
| 498 | sim_d10v_translate_imap_addr (unsigned long offset, |
| 499 | int nr_bytes, |
| 500 | unsigned long *phys, |
| 501 | unsigned long (*imap_register) (int reg_nr)) |
| 502 | { |
| 503 | short map; |
| 504 | int regno; |
| 505 | int sp; |
| 506 | int segno; |
| 507 | last_from = "logical-insn"; |
| 508 | if (offset >= (IMAP_BLOCK_SIZE * SIM_D10V_NR_IMAP_REGS)) |
| 509 | { |
| 510 | /* Logical address outside of IMAP segments, not supported */ |
| 511 | return 0; |
| 512 | } |
| 513 | regno = (offset / IMAP_BLOCK_SIZE); |
| 514 | offset = (offset % IMAP_BLOCK_SIZE); |
| 515 | if (offset + nr_bytes > IMAP_BLOCK_SIZE) |
| 516 | { |
| 517 | /* Don't cross a BLOCK boundary */ |
| 518 | nr_bytes = IMAP_BLOCK_SIZE - offset; |
| 519 | } |
| 520 | map = imap_register (regno); |
| 521 | sp = (map & 0x3000) >> 12; |
| 522 | segno = (map & 0x007f); |
| 523 | switch (sp) |
| 524 | { |
| 525 | case 0: /* 00: unified memory */ |
| 526 | *phys = SIM_D10V_MEMORY_UNIFIED + (segno << 17) + offset; |
| 527 | last_to = "unified"; |
| 528 | break; |
| 529 | case 1: /* 01: instruction memory */ |
| 530 | *phys = SIM_D10V_MEMORY_INSN + (IMAP_BLOCK_SIZE * regno) + offset; |
| 531 | last_to = "chip-insn"; |
| 532 | break; |
| 533 | case 2: /*10*/ |
| 534 | /* Reserved. */ |
| 535 | return 0; |
| 536 | case 3: /* 11: for testing - instruction memory */ |
| 537 | offset = (offset % 0x800); |
| 538 | *phys = SIM_D10V_MEMORY_INSN + offset; |
| 539 | if (offset + nr_bytes > 0x800) |
| 540 | /* don't cross VM boundary */ |
| 541 | nr_bytes = 0x800 - offset; |
| 542 | last_to = "test-insn"; |
| 543 | break; |
| 544 | } |
| 545 | return nr_bytes; |
| 546 | } |
| 547 | |
| 548 | unsigned long |
| 549 | sim_d10v_translate_addr (unsigned long memaddr, |
| 550 | int nr_bytes, |
| 551 | unsigned long *targ_addr, |
| 552 | unsigned long (*dmap_register) (int reg_nr), |
| 553 | unsigned long (*imap_register) (int reg_nr)) |
| 554 | { |
| 555 | unsigned long phys; |
| 556 | unsigned long seg; |
| 557 | unsigned long off; |
| 558 | |
| 559 | last_from = "unknown"; |
| 560 | last_to = "unknown"; |
| 561 | |
| 562 | seg = (memaddr >> 24); |
| 563 | off = (memaddr & 0xffffffL); |
| 564 | |
| 565 | /* However, if we've asked to use the previous generation of segment |
| 566 | mapping, rearrange the segments as follows. */ |
| 567 | |
| 568 | if (old_segment_mapping) |
| 569 | { |
| 570 | switch (seg) |
| 571 | { |
| 572 | case 0x00: /* DMAP translated memory */ |
| 573 | seg = 0x10; |
| 574 | break; |
| 575 | case 0x01: /* IMAP translated memory */ |
| 576 | seg = 0x11; |
| 577 | break; |
| 578 | case 0x10: /* On-chip data memory */ |
| 579 | seg = 0x02; |
| 580 | break; |
| 581 | case 0x11: /* On-chip insn memory */ |
| 582 | seg = 0x01; |
| 583 | break; |
| 584 | case 0x12: /* Unified memory */ |
| 585 | seg = 0x00; |
| 586 | break; |
| 587 | } |
| 588 | } |
| 589 | |
| 590 | switch (seg) |
| 591 | { |
| 592 | case 0x00: /* Physical unified memory */ |
| 593 | last_from = "phys-unified"; |
| 594 | last_to = "unified"; |
| 595 | phys = SIM_D10V_MEMORY_UNIFIED + off; |
| 596 | if ((off % SEGMENT_SIZE) + nr_bytes > SEGMENT_SIZE) |
| 597 | nr_bytes = SEGMENT_SIZE - (off % SEGMENT_SIZE); |
| 598 | break; |
| 599 | |
| 600 | case 0x01: /* Physical instruction memory */ |
| 601 | last_from = "phys-insn"; |
| 602 | last_to = "chip-insn"; |
| 603 | phys = SIM_D10V_MEMORY_INSN + off; |
| 604 | if ((off % SEGMENT_SIZE) + nr_bytes > SEGMENT_SIZE) |
| 605 | nr_bytes = SEGMENT_SIZE - (off % SEGMENT_SIZE); |
| 606 | break; |
| 607 | |
| 608 | case 0x02: /* Physical data memory segment */ |
| 609 | last_from = "phys-data"; |
| 610 | last_to = "chip-data"; |
| 611 | phys = SIM_D10V_MEMORY_DATA + off; |
| 612 | if ((off % SEGMENT_SIZE) + nr_bytes > SEGMENT_SIZE) |
| 613 | nr_bytes = SEGMENT_SIZE - (off % SEGMENT_SIZE); |
| 614 | break; |
| 615 | |
| 616 | case 0x10: /* in logical data address segment */ |
| 617 | nr_bytes = sim_d10v_translate_dmap_addr (off, nr_bytes, &phys, |
| 618 | dmap_register); |
| 619 | break; |
| 620 | |
| 621 | case 0x11: /* in logical instruction address segment */ |
| 622 | nr_bytes = sim_d10v_translate_imap_addr (off, nr_bytes, &phys, |
| 623 | imap_register); |
| 624 | break; |
| 625 | |
| 626 | default: |
| 627 | return 0; |
| 628 | } |
| 629 | |
| 630 | *targ_addr = phys; |
| 631 | return nr_bytes; |
| 632 | } |
| 633 | |
| 634 | /* Return a pointer into the raw buffer designated by phys_addr. It |
| 635 | is assumed that the client has already ensured that the access |
| 636 | isn't going to cross a segment boundary. */ |
| 637 | |
| 638 | uint8 * |
| 639 | map_memory (unsigned phys_addr) |
| 640 | { |
| 641 | uint8 **memory; |
| 642 | uint8 *raw; |
| 643 | unsigned offset; |
| 644 | int segment = ((phys_addr >> 24) & 0xff); |
| 645 | |
| 646 | switch (segment) |
| 647 | { |
| 648 | |
| 649 | case 0x00: /* Unified memory */ |
| 650 | { |
| 651 | memory = &State.mem.unif[(phys_addr / SEGMENT_SIZE) % UMEM_SEGMENTS]; |
| 652 | last_segname = "umem"; |
| 653 | break; |
| 654 | } |
| 655 | |
| 656 | case 0x01: /* On-chip insn memory */ |
| 657 | { |
| 658 | memory = &State.mem.insn[(phys_addr / SEGMENT_SIZE) % IMEM_SEGMENTS]; |
| 659 | last_segname = "imem"; |
| 660 | break; |
| 661 | } |
| 662 | |
| 663 | case 0x02: /* On-chip data memory */ |
| 664 | { |
| 665 | if ((phys_addr & 0xff00) == 0xff00) |
| 666 | { |
| 667 | phys_addr = (phys_addr & 0xffff); |
| 668 | if (phys_addr == DMAP2_SHADDOW) |
| 669 | { |
| 670 | phys_addr = DMAP2_OFFSET; |
| 671 | last_segname = "dmap"; |
| 672 | } |
| 673 | else |
| 674 | last_segname = "reg"; |
| 675 | } |
| 676 | else |
| 677 | last_segname = "dmem"; |
| 678 | memory = &State.mem.data[(phys_addr / SEGMENT_SIZE) % DMEM_SEGMENTS]; |
| 679 | break; |
| 680 | } |
| 681 | |
| 682 | default: |
| 683 | /* OOPS! */ |
| 684 | last_segname = "scrap"; |
| 685 | return State.mem.fault; |
| 686 | } |
| 687 | |
| 688 | if (*memory == NULL) |
| 689 | { |
| 690 | *memory = calloc (1, SEGMENT_SIZE); |
| 691 | if (*memory == NULL) |
| 692 | { |
| 693 | (*d10v_callback->printf_filtered) (d10v_callback, "Malloc failed.\n"); |
| 694 | return State.mem.fault; |
| 695 | } |
| 696 | } |
| 697 | |
| 698 | offset = (phys_addr % SEGMENT_SIZE); |
| 699 | raw = *memory + offset; |
| 700 | return raw; |
| 701 | } |
| 702 | |
| 703 | /* Transfer data to/from simulated memory. Since a bug in either the |
| 704 | simulated program or in gdb or the simulator itself may cause a |
| 705 | bogus address to be passed in, we need to do some sanity checking |
| 706 | on addresses to make sure they are within bounds. When an address |
| 707 | fails the bounds check, treat it as a zero length read/write rather |
| 708 | than aborting the entire run. */ |
| 709 | |
| 710 | static int |
| 711 | xfer_mem (SIM_ADDR virt, |
| 712 | unsigned char *buffer, |
| 713 | int size, |
| 714 | int write_p) |
| 715 | { |
| 716 | int xfered = 0; |
| 717 | |
| 718 | while (xfered < size) |
| 719 | { |
| 720 | uint8 *memory; |
| 721 | unsigned long phys; |
| 722 | int phys_size; |
| 723 | phys_size = sim_d10v_translate_addr (virt, size, |
| 724 | &phys, |
| 725 | dmap_register, |
| 726 | imap_register); |
| 727 | if (phys_size == 0) |
| 728 | return xfered; |
| 729 | |
| 730 | memory = map_memory (phys); |
| 731 | |
| 732 | #ifdef DEBUG |
| 733 | if ((d10v_debug & DEBUG_INSTRUCTION) != 0) |
| 734 | { |
| 735 | (*d10v_callback->printf_filtered) |
| 736 | (d10v_callback, |
| 737 | "sim_%s %d bytes: 0x%08lx (%s) -> 0x%08lx (%s) -> 0x%08lx (%s)\n", |
| 738 | (write_p ? "write" : "read"), |
| 739 | phys_size, virt, last_from, |
| 740 | phys, last_to, |
| 741 | (long) memory, last_segname); |
| 742 | } |
| 743 | #endif |
| 744 | |
| 745 | if (write_p) |
| 746 | { |
| 747 | memcpy (memory, buffer, phys_size); |
| 748 | } |
| 749 | else |
| 750 | { |
| 751 | memcpy (buffer, memory, phys_size); |
| 752 | } |
| 753 | |
| 754 | virt += phys_size; |
| 755 | buffer += phys_size; |
| 756 | xfered += phys_size; |
| 757 | } |
| 758 | |
| 759 | return size; |
| 760 | } |
| 761 | |
| 762 | |
| 763 | int |
| 764 | sim_write (sd, addr, buffer, size) |
| 765 | SIM_DESC sd; |
| 766 | SIM_ADDR addr; |
| 767 | unsigned char *buffer; |
| 768 | int size; |
| 769 | { |
| 770 | /* FIXME: this should be performing a virtual transfer */ |
| 771 | return xfer_mem( addr, buffer, size, 1); |
| 772 | } |
| 773 | |
| 774 | int |
| 775 | sim_read (sd, addr, buffer, size) |
| 776 | SIM_DESC sd; |
| 777 | SIM_ADDR addr; |
| 778 | unsigned char *buffer; |
| 779 | int size; |
| 780 | { |
| 781 | /* FIXME: this should be performing a virtual transfer */ |
| 782 | return xfer_mem( addr, buffer, size, 0); |
| 783 | } |
| 784 | |
| 785 | |
| 786 | SIM_DESC |
| 787 | sim_open (kind, callback, abfd, argv) |
| 788 | SIM_OPEN_KIND kind; |
| 789 | host_callback *callback; |
| 790 | struct _bfd *abfd; |
| 791 | char **argv; |
| 792 | { |
| 793 | struct simops *s; |
| 794 | struct hash_entry *h; |
| 795 | static int init_p = 0; |
| 796 | char **p; |
| 797 | |
| 798 | sim_kind = kind; |
| 799 | d10v_callback = callback; |
| 800 | myname = argv[0]; |
| 801 | old_segment_mapping = 0; |
| 802 | |
| 803 | /* NOTE: This argument parsing is only effective when this function |
| 804 | is called by GDB. Standalone argument parsing is handled by |
| 805 | sim/common/run.c. */ |
| 806 | for (p = argv + 1; *p; ++p) |
| 807 | { |
| 808 | if (strcmp (*p, "-oldseg") == 0) |
| 809 | old_segment_mapping = 1; |
| 810 | #ifdef DEBUG |
| 811 | else if (strcmp (*p, "-t") == 0) |
| 812 | d10v_debug = DEBUG; |
| 813 | else if (strncmp (*p, "-t", 2) == 0) |
| 814 | d10v_debug = atoi (*p + 2); |
| 815 | #endif |
| 816 | else |
| 817 | (*d10v_callback->printf_filtered) (d10v_callback, "ERROR: unsupported option(s): %s\n",*p); |
| 818 | } |
| 819 | |
| 820 | /* put all the opcodes in the hash table */ |
| 821 | if (!init_p++) |
| 822 | { |
| 823 | for (s = Simops; s->func; s++) |
| 824 | { |
| 825 | h = &hash_table[hash(s->opcode,s->format)]; |
| 826 | |
| 827 | /* go to the last entry in the chain */ |
| 828 | while (h->next) |
| 829 | h = h->next; |
| 830 | |
| 831 | if (h->ops) |
| 832 | { |
| 833 | h->next = (struct hash_entry *) calloc(1,sizeof(struct hash_entry)); |
| 834 | if (!h->next) |
| 835 | perror ("malloc failure"); |
| 836 | |
| 837 | h = h->next; |
| 838 | } |
| 839 | h->ops = s; |
| 840 | h->mask = s->mask; |
| 841 | h->opcode = s->opcode; |
| 842 | h->size = s->is_long; |
| 843 | } |
| 844 | } |
| 845 | |
| 846 | /* reset the processor state */ |
| 847 | if (!State.mem.data[0]) |
| 848 | sim_size (1); |
| 849 | sim_create_inferior ((SIM_DESC) 1, NULL, NULL, NULL); |
| 850 | |
| 851 | /* Fudge our descriptor. */ |
| 852 | return (SIM_DESC) 1; |
| 853 | } |
| 854 | |
| 855 | |
| 856 | void |
| 857 | sim_close (sd, quitting) |
| 858 | SIM_DESC sd; |
| 859 | int quitting; |
| 860 | { |
| 861 | if (prog_bfd != NULL && prog_bfd_was_opened_p) |
| 862 | { |
| 863 | bfd_close (prog_bfd); |
| 864 | prog_bfd = NULL; |
| 865 | prog_bfd_was_opened_p = 0; |
| 866 | } |
| 867 | } |
| 868 | |
| 869 | void |
| 870 | sim_set_profile (n) |
| 871 | int n; |
| 872 | { |
| 873 | (*d10v_callback->printf_filtered) (d10v_callback, "sim_set_profile %d\n",n); |
| 874 | } |
| 875 | |
| 876 | void |
| 877 | sim_set_profile_size (n) |
| 878 | int n; |
| 879 | { |
| 880 | (*d10v_callback->printf_filtered) (d10v_callback, "sim_set_profile_size %d\n",n); |
| 881 | } |
| 882 | |
| 883 | uint8 * |
| 884 | dmem_addr (uint16 offset) |
| 885 | { |
| 886 | unsigned long phys; |
| 887 | uint8 *mem; |
| 888 | int phys_size; |
| 889 | |
| 890 | /* Note: DMEM address range is 0..0x10000. Calling code can compute |
| 891 | things like ``0xfffe + 0x0e60 == 0x10e5d''. Since offset's type |
| 892 | is uint16 this is modulo'ed onto 0x0e5d. */ |
| 893 | |
| 894 | phys_size = sim_d10v_translate_dmap_addr (offset, 1, &phys, |
| 895 | dmap_register); |
| 896 | if (phys_size == 0) |
| 897 | { |
| 898 | mem = State.mem.fault; |
| 899 | } |
| 900 | else |
| 901 | mem = map_memory (phys); |
| 902 | #ifdef DEBUG |
| 903 | if ((d10v_debug & DEBUG_MEMORY)) |
| 904 | { |
| 905 | (*d10v_callback->printf_filtered) |
| 906 | (d10v_callback, |
| 907 | "mem: 0x%08x (%s) -> 0x%08lx %d (%s) -> 0x%08lx (%s)\n", |
| 908 | offset, last_from, |
| 909 | phys, phys_size, last_to, |
| 910 | (long) mem, last_segname); |
| 911 | } |
| 912 | #endif |
| 913 | return mem; |
| 914 | } |
| 915 | |
| 916 | uint8 * |
| 917 | imem_addr (uint32 offset) |
| 918 | { |
| 919 | unsigned long phys; |
| 920 | uint8 *mem; |
| 921 | int phys_size = sim_d10v_translate_imap_addr (offset, 1, &phys, imap_register); |
| 922 | if (phys_size == 0) |
| 923 | { |
| 924 | return State.mem.fault; |
| 925 | } |
| 926 | mem = map_memory (phys); |
| 927 | #ifdef DEBUG |
| 928 | if ((d10v_debug & DEBUG_MEMORY)) |
| 929 | { |
| 930 | (*d10v_callback->printf_filtered) |
| 931 | (d10v_callback, |
| 932 | "mem: 0x%08x (%s) -> 0x%08lx %d (%s) -> 0x%08lx (%s)\n", |
| 933 | offset, last_from, |
| 934 | phys, phys_size, last_to, |
| 935 | (long) mem, last_segname); |
| 936 | } |
| 937 | #endif |
| 938 | return mem; |
| 939 | } |
| 940 | |
| 941 | static int stop_simulator = 0; |
| 942 | |
| 943 | int |
| 944 | sim_stop (sd) |
| 945 | SIM_DESC sd; |
| 946 | { |
| 947 | stop_simulator = 1; |
| 948 | return 1; |
| 949 | } |
| 950 | |
| 951 | |
| 952 | /* Run (or resume) the program. */ |
| 953 | void |
| 954 | sim_resume (sd, step, siggnal) |
| 955 | SIM_DESC sd; |
| 956 | int step, siggnal; |
| 957 | { |
| 958 | uint32 inst; |
| 959 | uint8 *iaddr; |
| 960 | |
| 961 | /* (*d10v_callback->printf_filtered) (d10v_callback, "sim_resume (%d,%d) PC=0x%x\n",step,siggnal,PC); */ |
| 962 | State.exception = 0; |
| 963 | if (step) |
| 964 | sim_stop (sd); |
| 965 | |
| 966 | switch (siggnal) |
| 967 | { |
| 968 | case 0: |
| 969 | break; |
| 970 | #ifdef SIGBUS |
| 971 | case SIGBUS: |
| 972 | #endif |
| 973 | case SIGSEGV: |
| 974 | SET_BPC (PC); |
| 975 | SET_BPSW (PSW); |
| 976 | SET_HW_PSW ((PSW & (PSW_F0_BIT | PSW_F1_BIT | PSW_C_BIT))); |
| 977 | JMP (AE_VECTOR_START); |
| 978 | SLOT_FLUSH (); |
| 979 | break; |
| 980 | case SIGILL: |
| 981 | SET_BPC (PC); |
| 982 | SET_BPSW (PSW); |
| 983 | SET_HW_PSW ((PSW & (PSW_F0_BIT | PSW_F1_BIT | PSW_C_BIT))); |
| 984 | JMP (RIE_VECTOR_START); |
| 985 | SLOT_FLUSH (); |
| 986 | break; |
| 987 | default: |
| 988 | /* just ignore it */ |
| 989 | break; |
| 990 | } |
| 991 | |
| 992 | do |
| 993 | { |
| 994 | iaddr = imem_addr ((uint32)PC << 2); |
| 995 | if (iaddr == State.mem.fault) |
| 996 | { |
| 997 | State.exception = SIGBUS; |
| 998 | break; |
| 999 | } |
| 1000 | |
| 1001 | inst = get_longword( iaddr ); |
| 1002 | |
| 1003 | State.pc_changed = 0; |
| 1004 | ins_type_counters[ (int)INS_CYCLES ]++; |
| 1005 | |
| 1006 | switch (inst & 0xC0000000) |
| 1007 | { |
| 1008 | case 0xC0000000: |
| 1009 | /* long instruction */ |
| 1010 | do_long (inst & 0x3FFFFFFF); |
| 1011 | break; |
| 1012 | case 0x80000000: |
| 1013 | /* R -> L */ |
| 1014 | do_2_short ( inst & 0x7FFF, (inst & 0x3FFF8000) >> 15, RIGHT_FIRST); |
| 1015 | break; |
| 1016 | case 0x40000000: |
| 1017 | /* L -> R */ |
| 1018 | do_2_short ((inst & 0x3FFF8000) >> 15, inst & 0x7FFF, LEFT_FIRST); |
| 1019 | break; |
| 1020 | case 0: |
| 1021 | do_parallel ((inst & 0x3FFF8000) >> 15, inst & 0x7FFF); |
| 1022 | break; |
| 1023 | } |
| 1024 | |
| 1025 | /* If the PC of the current instruction matches RPT_E then |
| 1026 | schedule a branch to the loop start. If one of those |
| 1027 | instructions happens to be a branch, than that instruction |
| 1028 | will be ignored */ |
| 1029 | if (!State.pc_changed) |
| 1030 | { |
| 1031 | if (PSW_RP && PC == RPT_E) |
| 1032 | { |
| 1033 | /* Note: The behavour of a branch instruction at RPT_E |
| 1034 | is implementation dependant, this simulator takes the |
| 1035 | branch. Branching to RPT_E is valid, the instruction |
| 1036 | must be executed before the loop is taken. */ |
| 1037 | if (RPT_C == 1) |
| 1038 | { |
| 1039 | SET_PSW_RP (0); |
| 1040 | SET_RPT_C (0); |
| 1041 | SET_PC (PC + 1); |
| 1042 | } |
| 1043 | else |
| 1044 | { |
| 1045 | SET_RPT_C (RPT_C - 1); |
| 1046 | SET_PC (RPT_S); |
| 1047 | } |
| 1048 | } |
| 1049 | else |
| 1050 | SET_PC (PC + 1); |
| 1051 | } |
| 1052 | |
| 1053 | /* Check for a breakpoint trap on this instruction. This |
| 1054 | overrides any pending branches or loops */ |
| 1055 | if (PSW_DB && PC == IBA) |
| 1056 | { |
| 1057 | SET_BPC (PC); |
| 1058 | SET_BPSW (PSW); |
| 1059 | SET_PSW (PSW & PSW_SM_BIT); |
| 1060 | SET_PC (SDBT_VECTOR_START); |
| 1061 | } |
| 1062 | |
| 1063 | /* Writeback all the DATA / PC changes */ |
| 1064 | SLOT_FLUSH (); |
| 1065 | |
| 1066 | #ifdef NEED_UI_LOOP_HOOK |
| 1067 | if (ui_loop_hook != NULL && ui_loop_hook_counter-- < 0) |
| 1068 | { |
| 1069 | ui_loop_hook_counter = UI_LOOP_POLL_INTERVAL; |
| 1070 | ui_loop_hook (0); |
| 1071 | } |
| 1072 | #endif /* NEED_UI_LOOP_HOOK */ |
| 1073 | } |
| 1074 | while ( !State.exception && !stop_simulator); |
| 1075 | |
| 1076 | if (step && !State.exception) |
| 1077 | State.exception = SIGTRAP; |
| 1078 | } |
| 1079 | |
| 1080 | void |
| 1081 | sim_set_trace (void) |
| 1082 | { |
| 1083 | #ifdef DEBUG |
| 1084 | d10v_debug = DEBUG; |
| 1085 | #endif |
| 1086 | } |
| 1087 | |
| 1088 | void |
| 1089 | sim_info (sd, verbose) |
| 1090 | SIM_DESC sd; |
| 1091 | int verbose; |
| 1092 | { |
| 1093 | char buf1[40]; |
| 1094 | char buf2[40]; |
| 1095 | char buf3[40]; |
| 1096 | char buf4[40]; |
| 1097 | char buf5[40]; |
| 1098 | unsigned long left = ins_type_counters[ (int)INS_LEFT ] + ins_type_counters[ (int)INS_LEFT_COND_EXE ]; |
| 1099 | unsigned long left_nops = ins_type_counters[ (int)INS_LEFT_NOPS ]; |
| 1100 | unsigned long left_parallel = ins_type_counters[ (int)INS_LEFT_PARALLEL ]; |
| 1101 | unsigned long left_cond = ins_type_counters[ (int)INS_LEFT_COND_TEST ]; |
| 1102 | unsigned long left_total = left + left_parallel + left_cond + left_nops; |
| 1103 | |
| 1104 | unsigned long right = ins_type_counters[ (int)INS_RIGHT ] + ins_type_counters[ (int)INS_RIGHT_COND_EXE ]; |
| 1105 | unsigned long right_nops = ins_type_counters[ (int)INS_RIGHT_NOPS ]; |
| 1106 | unsigned long right_parallel = ins_type_counters[ (int)INS_RIGHT_PARALLEL ]; |
| 1107 | unsigned long right_cond = ins_type_counters[ (int)INS_RIGHT_COND_TEST ]; |
| 1108 | unsigned long right_total = right + right_parallel + right_cond + right_nops; |
| 1109 | |
| 1110 | unsigned long unknown = ins_type_counters[ (int)INS_UNKNOWN ]; |
| 1111 | unsigned long ins_long = ins_type_counters[ (int)INS_LONG ]; |
| 1112 | unsigned long parallel = ins_type_counters[ (int)INS_PARALLEL ]; |
| 1113 | unsigned long leftright = ins_type_counters[ (int)INS_LEFTRIGHT ]; |
| 1114 | unsigned long rightleft = ins_type_counters[ (int)INS_RIGHTLEFT ]; |
| 1115 | unsigned long cond_true = ins_type_counters[ (int)INS_COND_TRUE ]; |
| 1116 | unsigned long cond_false = ins_type_counters[ (int)INS_COND_FALSE ]; |
| 1117 | unsigned long cond_jump = ins_type_counters[ (int)INS_COND_JUMP ]; |
| 1118 | unsigned long cycles = ins_type_counters[ (int)INS_CYCLES ]; |
| 1119 | unsigned long total = (unknown + left_total + right_total + ins_long); |
| 1120 | |
| 1121 | int size = strlen (add_commas (buf1, sizeof (buf1), total)); |
| 1122 | int parallel_size = strlen (add_commas (buf1, sizeof (buf1), |
| 1123 | (left_parallel > right_parallel) ? left_parallel : right_parallel)); |
| 1124 | int cond_size = strlen (add_commas (buf1, sizeof (buf1), (left_cond > right_cond) ? left_cond : right_cond)); |
| 1125 | int nop_size = strlen (add_commas (buf1, sizeof (buf1), (left_nops > right_nops) ? left_nops : right_nops)); |
| 1126 | int normal_size = strlen (add_commas (buf1, sizeof (buf1), (left > right) ? left : right)); |
| 1127 | |
| 1128 | (*d10v_callback->printf_filtered) (d10v_callback, |
| 1129 | "executed %*s left instruction(s), %*s normal, %*s parallel, %*s EXExxx, %*s nops\n", |
| 1130 | size, add_commas (buf1, sizeof (buf1), left_total), |
| 1131 | normal_size, add_commas (buf2, sizeof (buf2), left), |
| 1132 | parallel_size, add_commas (buf3, sizeof (buf3), left_parallel), |
| 1133 | cond_size, add_commas (buf4, sizeof (buf4), left_cond), |
| 1134 | nop_size, add_commas (buf5, sizeof (buf5), left_nops)); |
| 1135 | |
| 1136 | (*d10v_callback->printf_filtered) (d10v_callback, |
| 1137 | "executed %*s right instruction(s), %*s normal, %*s parallel, %*s EXExxx, %*s nops\n", |
| 1138 | size, add_commas (buf1, sizeof (buf1), right_total), |
| 1139 | normal_size, add_commas (buf2, sizeof (buf2), right), |
| 1140 | parallel_size, add_commas (buf3, sizeof (buf3), right_parallel), |
| 1141 | cond_size, add_commas (buf4, sizeof (buf4), right_cond), |
| 1142 | nop_size, add_commas (buf5, sizeof (buf5), right_nops)); |
| 1143 | |
| 1144 | if (ins_long) |
| 1145 | (*d10v_callback->printf_filtered) (d10v_callback, |
| 1146 | "executed %*s long instruction(s)\n", |
| 1147 | size, add_commas (buf1, sizeof (buf1), ins_long)); |
| 1148 | |
| 1149 | if (parallel) |
| 1150 | (*d10v_callback->printf_filtered) (d10v_callback, |
| 1151 | "executed %*s parallel instruction(s)\n", |
| 1152 | size, add_commas (buf1, sizeof (buf1), parallel)); |
| 1153 | |
| 1154 | if (leftright) |
| 1155 | (*d10v_callback->printf_filtered) (d10v_callback, |
| 1156 | "executed %*s instruction(s) encoded L->R\n", |
| 1157 | size, add_commas (buf1, sizeof (buf1), leftright)); |
| 1158 | |
| 1159 | if (rightleft) |
| 1160 | (*d10v_callback->printf_filtered) (d10v_callback, |
| 1161 | "executed %*s instruction(s) encoded R->L\n", |
| 1162 | size, add_commas (buf1, sizeof (buf1), rightleft)); |
| 1163 | |
| 1164 | if (unknown) |
| 1165 | (*d10v_callback->printf_filtered) (d10v_callback, |
| 1166 | "executed %*s unknown instruction(s)\n", |
| 1167 | size, add_commas (buf1, sizeof (buf1), unknown)); |
| 1168 | |
| 1169 | if (cond_true) |
| 1170 | (*d10v_callback->printf_filtered) (d10v_callback, |
| 1171 | "executed %*s instruction(s) due to EXExxx condition being true\n", |
| 1172 | size, add_commas (buf1, sizeof (buf1), cond_true)); |
| 1173 | |
| 1174 | if (cond_false) |
| 1175 | (*d10v_callback->printf_filtered) (d10v_callback, |
| 1176 | "skipped %*s instruction(s) due to EXExxx condition being false\n", |
| 1177 | size, add_commas (buf1, sizeof (buf1), cond_false)); |
| 1178 | |
| 1179 | if (cond_jump) |
| 1180 | (*d10v_callback->printf_filtered) (d10v_callback, |
| 1181 | "skipped %*s instruction(s) due to conditional branch succeeding\n", |
| 1182 | size, add_commas (buf1, sizeof (buf1), cond_jump)); |
| 1183 | |
| 1184 | (*d10v_callback->printf_filtered) (d10v_callback, |
| 1185 | "executed %*s cycle(s)\n", |
| 1186 | size, add_commas (buf1, sizeof (buf1), cycles)); |
| 1187 | |
| 1188 | (*d10v_callback->printf_filtered) (d10v_callback, |
| 1189 | "executed %*s total instructions\n", |
| 1190 | size, add_commas (buf1, sizeof (buf1), total)); |
| 1191 | } |
| 1192 | |
| 1193 | SIM_RC |
| 1194 | sim_create_inferior (sd, abfd, argv, env) |
| 1195 | SIM_DESC sd; |
| 1196 | struct _bfd *abfd; |
| 1197 | char **argv; |
| 1198 | char **env; |
| 1199 | { |
| 1200 | bfd_vma start_address; |
| 1201 | |
| 1202 | /* reset all state information */ |
| 1203 | memset (&State.regs, 0, (int)&State.mem - (int)&State.regs); |
| 1204 | |
| 1205 | /* There was a hack here to copy the values of argc and argv into r0 |
| 1206 | and r1. The values were also saved into some high memory that |
| 1207 | won't be overwritten by the stack (0x7C00). The reason for doing |
| 1208 | this was to allow the 'run' program to accept arguments. Without |
| 1209 | the hack, this is not possible anymore. If the simulator is run |
| 1210 | from the debugger, arguments cannot be passed in, so this makes |
| 1211 | no difference. */ |
| 1212 | |
| 1213 | /* set PC */ |
| 1214 | if (abfd != NULL) |
| 1215 | start_address = bfd_get_start_address (abfd); |
| 1216 | else |
| 1217 | start_address = 0xffc0 << 2; |
| 1218 | #ifdef DEBUG |
| 1219 | if (d10v_debug) |
| 1220 | (*d10v_callback->printf_filtered) (d10v_callback, "sim_create_inferior: PC=0x%lx\n", (long) start_address); |
| 1221 | #endif |
| 1222 | SET_CREG (PC_CR, start_address >> 2); |
| 1223 | |
| 1224 | /* cpu resets imap0 to 0 and imap1 to 0x7f, but D10V-EVA board |
| 1225 | initializes imap0 and imap1 to 0x1000 as part of its ROM |
| 1226 | initialization. */ |
| 1227 | if (old_segment_mapping) |
| 1228 | { |
| 1229 | /* External memory startup. This is the HARD reset state. */ |
| 1230 | set_imap_register (0, 0x0000); |
| 1231 | set_imap_register (1, 0x007f); |
| 1232 | set_dmap_register (0, 0x2000); |
| 1233 | set_dmap_register (1, 0x2000); |
| 1234 | set_dmap_register (2, 0x0000); /* Old DMAP */ |
| 1235 | set_dmap_register (3, 0x0000); |
| 1236 | } |
| 1237 | else |
| 1238 | { |
| 1239 | /* Internal memory startup. This is the ROM intialized state. */ |
| 1240 | set_imap_register (0, 0x1000); |
| 1241 | set_imap_register (1, 0x1000); |
| 1242 | set_dmap_register (0, 0x2000); |
| 1243 | set_dmap_register (1, 0x2000); |
| 1244 | set_dmap_register (2, 0x2000); /* DMAP2 initial internal value is |
| 1245 | 0x2000 on the new board. */ |
| 1246 | set_dmap_register (3, 0x0000); |
| 1247 | } |
| 1248 | |
| 1249 | SLOT_FLUSH (); |
| 1250 | return SIM_RC_OK; |
| 1251 | } |
| 1252 | |
| 1253 | |
| 1254 | void |
| 1255 | sim_set_callbacks (p) |
| 1256 | host_callback *p; |
| 1257 | { |
| 1258 | d10v_callback = p; |
| 1259 | } |
| 1260 | |
| 1261 | void |
| 1262 | sim_stop_reason (sd, reason, sigrc) |
| 1263 | SIM_DESC sd; |
| 1264 | enum sim_stop *reason; |
| 1265 | int *sigrc; |
| 1266 | { |
| 1267 | /* (*d10v_callback->printf_filtered) (d10v_callback, "sim_stop_reason: PC=0x%x\n",PC<<2); */ |
| 1268 | |
| 1269 | switch (State.exception) |
| 1270 | { |
| 1271 | case SIG_D10V_STOP: /* stop instruction */ |
| 1272 | *reason = sim_exited; |
| 1273 | *sigrc = 0; |
| 1274 | break; |
| 1275 | |
| 1276 | case SIG_D10V_EXIT: /* exit trap */ |
| 1277 | *reason = sim_exited; |
| 1278 | *sigrc = GPR (0); |
| 1279 | break; |
| 1280 | |
| 1281 | case SIG_D10V_BUS: |
| 1282 | *reason = sim_stopped; |
| 1283 | #ifdef SIGBUS |
| 1284 | *sigrc = SIGBUS; |
| 1285 | #else |
| 1286 | *sigrc = SIGSEGV; |
| 1287 | #endif |
| 1288 | break; |
| 1289 | |
| 1290 | default: /* some signal */ |
| 1291 | *reason = sim_stopped; |
| 1292 | if (stop_simulator && !State.exception) |
| 1293 | *sigrc = SIGINT; |
| 1294 | else |
| 1295 | *sigrc = State.exception; |
| 1296 | break; |
| 1297 | } |
| 1298 | |
| 1299 | stop_simulator = 0; |
| 1300 | } |
| 1301 | |
| 1302 | int |
| 1303 | sim_fetch_register (sd, rn, memory, length) |
| 1304 | SIM_DESC sd; |
| 1305 | int rn; |
| 1306 | unsigned char *memory; |
| 1307 | int length; |
| 1308 | { |
| 1309 | int size; |
| 1310 | switch ((enum sim_d10v_regs) rn) |
| 1311 | { |
| 1312 | case SIM_D10V_R0_REGNUM: |
| 1313 | case SIM_D10V_R1_REGNUM: |
| 1314 | case SIM_D10V_R2_REGNUM: |
| 1315 | case SIM_D10V_R3_REGNUM: |
| 1316 | case SIM_D10V_R4_REGNUM: |
| 1317 | case SIM_D10V_R5_REGNUM: |
| 1318 | case SIM_D10V_R6_REGNUM: |
| 1319 | case SIM_D10V_R7_REGNUM: |
| 1320 | case SIM_D10V_R8_REGNUM: |
| 1321 | case SIM_D10V_R9_REGNUM: |
| 1322 | case SIM_D10V_R10_REGNUM: |
| 1323 | case SIM_D10V_R11_REGNUM: |
| 1324 | case SIM_D10V_R12_REGNUM: |
| 1325 | case SIM_D10V_R13_REGNUM: |
| 1326 | case SIM_D10V_R14_REGNUM: |
| 1327 | case SIM_D10V_R15_REGNUM: |
| 1328 | WRITE_16 (memory, GPR (rn - SIM_D10V_R0_REGNUM)); |
| 1329 | size = 2; |
| 1330 | break; |
| 1331 | case SIM_D10V_CR0_REGNUM: |
| 1332 | case SIM_D10V_CR1_REGNUM: |
| 1333 | case SIM_D10V_CR2_REGNUM: |
| 1334 | case SIM_D10V_CR3_REGNUM: |
| 1335 | case SIM_D10V_CR4_REGNUM: |
| 1336 | case SIM_D10V_CR5_REGNUM: |
| 1337 | case SIM_D10V_CR6_REGNUM: |
| 1338 | case SIM_D10V_CR7_REGNUM: |
| 1339 | case SIM_D10V_CR8_REGNUM: |
| 1340 | case SIM_D10V_CR9_REGNUM: |
| 1341 | case SIM_D10V_CR10_REGNUM: |
| 1342 | case SIM_D10V_CR11_REGNUM: |
| 1343 | case SIM_D10V_CR12_REGNUM: |
| 1344 | case SIM_D10V_CR13_REGNUM: |
| 1345 | case SIM_D10V_CR14_REGNUM: |
| 1346 | case SIM_D10V_CR15_REGNUM: |
| 1347 | WRITE_16 (memory, CREG (rn - SIM_D10V_CR0_REGNUM)); |
| 1348 | size = 2; |
| 1349 | break; |
| 1350 | case SIM_D10V_A0_REGNUM: |
| 1351 | case SIM_D10V_A1_REGNUM: |
| 1352 | WRITE_64 (memory, ACC (rn - SIM_D10V_A0_REGNUM)); |
| 1353 | size = 8; |
| 1354 | break; |
| 1355 | case SIM_D10V_SPI_REGNUM: |
| 1356 | /* PSW_SM indicates that the current SP is the USER |
| 1357 | stack-pointer. */ |
| 1358 | WRITE_16 (memory, spi_register ()); |
| 1359 | size = 2; |
| 1360 | break; |
| 1361 | case SIM_D10V_SPU_REGNUM: |
| 1362 | /* PSW_SM indicates that the current SP is the USER |
| 1363 | stack-pointer. */ |
| 1364 | WRITE_16 (memory, spu_register ()); |
| 1365 | size = 2; |
| 1366 | break; |
| 1367 | case SIM_D10V_IMAP0_REGNUM: |
| 1368 | case SIM_D10V_IMAP1_REGNUM: |
| 1369 | WRITE_16 (memory, imap_register (rn - SIM_D10V_IMAP0_REGNUM)); |
| 1370 | size = 2; |
| 1371 | break; |
| 1372 | case SIM_D10V_DMAP0_REGNUM: |
| 1373 | case SIM_D10V_DMAP1_REGNUM: |
| 1374 | case SIM_D10V_DMAP2_REGNUM: |
| 1375 | case SIM_D10V_DMAP3_REGNUM: |
| 1376 | WRITE_16 (memory, dmap_register (rn - SIM_D10V_DMAP0_REGNUM)); |
| 1377 | size = 2; |
| 1378 | break; |
| 1379 | case SIM_D10V_TS2_DMAP_REGNUM: |
| 1380 | size = 0; |
| 1381 | break; |
| 1382 | default: |
| 1383 | size = 0; |
| 1384 | break; |
| 1385 | } |
| 1386 | return size; |
| 1387 | } |
| 1388 | |
| 1389 | int |
| 1390 | sim_store_register (sd, rn, memory, length) |
| 1391 | SIM_DESC sd; |
| 1392 | int rn; |
| 1393 | unsigned char *memory; |
| 1394 | int length; |
| 1395 | { |
| 1396 | int size; |
| 1397 | switch ((enum sim_d10v_regs) rn) |
| 1398 | { |
| 1399 | case SIM_D10V_R0_REGNUM: |
| 1400 | case SIM_D10V_R1_REGNUM: |
| 1401 | case SIM_D10V_R2_REGNUM: |
| 1402 | case SIM_D10V_R3_REGNUM: |
| 1403 | case SIM_D10V_R4_REGNUM: |
| 1404 | case SIM_D10V_R5_REGNUM: |
| 1405 | case SIM_D10V_R6_REGNUM: |
| 1406 | case SIM_D10V_R7_REGNUM: |
| 1407 | case SIM_D10V_R8_REGNUM: |
| 1408 | case SIM_D10V_R9_REGNUM: |
| 1409 | case SIM_D10V_R10_REGNUM: |
| 1410 | case SIM_D10V_R11_REGNUM: |
| 1411 | case SIM_D10V_R12_REGNUM: |
| 1412 | case SIM_D10V_R13_REGNUM: |
| 1413 | case SIM_D10V_R14_REGNUM: |
| 1414 | case SIM_D10V_R15_REGNUM: |
| 1415 | SET_GPR (rn - SIM_D10V_R0_REGNUM, READ_16 (memory)); |
| 1416 | size = 2; |
| 1417 | break; |
| 1418 | case SIM_D10V_CR0_REGNUM: |
| 1419 | case SIM_D10V_CR1_REGNUM: |
| 1420 | case SIM_D10V_CR2_REGNUM: |
| 1421 | case SIM_D10V_CR3_REGNUM: |
| 1422 | case SIM_D10V_CR4_REGNUM: |
| 1423 | case SIM_D10V_CR5_REGNUM: |
| 1424 | case SIM_D10V_CR6_REGNUM: |
| 1425 | case SIM_D10V_CR7_REGNUM: |
| 1426 | case SIM_D10V_CR8_REGNUM: |
| 1427 | case SIM_D10V_CR9_REGNUM: |
| 1428 | case SIM_D10V_CR10_REGNUM: |
| 1429 | case SIM_D10V_CR11_REGNUM: |
| 1430 | case SIM_D10V_CR12_REGNUM: |
| 1431 | case SIM_D10V_CR13_REGNUM: |
| 1432 | case SIM_D10V_CR14_REGNUM: |
| 1433 | case SIM_D10V_CR15_REGNUM: |
| 1434 | SET_CREG (rn - SIM_D10V_CR0_REGNUM, READ_16 (memory)); |
| 1435 | size = 2; |
| 1436 | break; |
| 1437 | case SIM_D10V_A0_REGNUM: |
| 1438 | case SIM_D10V_A1_REGNUM: |
| 1439 | SET_ACC (rn - SIM_D10V_A0_REGNUM, READ_64 (memory) & MASK40); |
| 1440 | size = 8; |
| 1441 | break; |
| 1442 | case SIM_D10V_SPI_REGNUM: |
| 1443 | /* PSW_SM indicates that the current SP is the USER |
| 1444 | stack-pointer. */ |
| 1445 | set_spi_register (READ_16 (memory)); |
| 1446 | size = 2; |
| 1447 | break; |
| 1448 | case SIM_D10V_SPU_REGNUM: |
| 1449 | set_spu_register (READ_16 (memory)); |
| 1450 | size = 2; |
| 1451 | break; |
| 1452 | case SIM_D10V_IMAP0_REGNUM: |
| 1453 | case SIM_D10V_IMAP1_REGNUM: |
| 1454 | set_imap_register (rn - SIM_D10V_IMAP0_REGNUM, READ_16(memory)); |
| 1455 | size = 2; |
| 1456 | break; |
| 1457 | case SIM_D10V_DMAP0_REGNUM: |
| 1458 | case SIM_D10V_DMAP1_REGNUM: |
| 1459 | case SIM_D10V_DMAP2_REGNUM: |
| 1460 | case SIM_D10V_DMAP3_REGNUM: |
| 1461 | set_dmap_register (rn - SIM_D10V_DMAP0_REGNUM, READ_16(memory)); |
| 1462 | size = 2; |
| 1463 | break; |
| 1464 | case SIM_D10V_TS2_DMAP_REGNUM: |
| 1465 | size = 0; |
| 1466 | break; |
| 1467 | default: |
| 1468 | size = 0; |
| 1469 | break; |
| 1470 | } |
| 1471 | SLOT_FLUSH (); |
| 1472 | return size; |
| 1473 | } |
| 1474 | |
| 1475 | |
| 1476 | void |
| 1477 | sim_do_command (sd, cmd) |
| 1478 | SIM_DESC sd; |
| 1479 | char *cmd; |
| 1480 | { |
| 1481 | (*d10v_callback->printf_filtered) (d10v_callback, "sim_do_command: %s\n",cmd); |
| 1482 | } |
| 1483 | |
| 1484 | SIM_RC |
| 1485 | sim_load (sd, prog, abfd, from_tty) |
| 1486 | SIM_DESC sd; |
| 1487 | char *prog; |
| 1488 | bfd *abfd; |
| 1489 | int from_tty; |
| 1490 | { |
| 1491 | extern bfd *sim_load_file (); /* ??? Don't know where this should live. */ |
| 1492 | |
| 1493 | if (prog_bfd != NULL && prog_bfd_was_opened_p) |
| 1494 | { |
| 1495 | bfd_close (prog_bfd); |
| 1496 | prog_bfd_was_opened_p = 0; |
| 1497 | } |
| 1498 | prog_bfd = sim_load_file (sd, myname, d10v_callback, prog, abfd, |
| 1499 | sim_kind == SIM_OPEN_DEBUG, |
| 1500 | 1/*LMA*/, sim_write); |
| 1501 | if (prog_bfd == NULL) |
| 1502 | return SIM_RC_FAIL; |
| 1503 | prog_bfd_was_opened_p = abfd == NULL; |
| 1504 | return SIM_RC_OK; |
| 1505 | } |