| 1 | /* |
| 2 | * This file is part of SIS. |
| 3 | * |
| 4 | * SIS, SPARC instruction simulator V2.5 Copyright (C) 1995 Jiri Gaisler, |
| 5 | * European Space Agency |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it under |
| 8 | * the terms of the GNU General Public License as published by the Free |
| 9 | * Software Foundation; either version 2 of the License, or (at your option) |
| 10 | * any later version. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, but WITHOUT |
| 13 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 14 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 15 | * more details. |
| 16 | * |
| 17 | * You should have received a copy of the GNU General Public License along with |
| 18 | * this program; if not, write to the Free Software Foundation, Inc., 675 |
| 19 | * Mass Ave, Cambridge, MA 02139, USA. |
| 20 | * |
| 21 | */ |
| 22 | |
| 23 | /* The control space devices */ |
| 24 | |
| 25 | #include <sys/types.h> |
| 26 | #include <stdio.h> |
| 27 | #include <termios.h> |
| 28 | #include <sys/fcntl.h> |
| 29 | #include <sys/file.h> |
| 30 | #include <unistd.h> |
| 31 | #include "sis.h" |
| 32 | #include "end.h" |
| 33 | #include "sim-config.h" |
| 34 | |
| 35 | extern int ctrl_c; |
| 36 | extern int32 sis_verbose; |
| 37 | extern int32 sparclite, sparclite_board; |
| 38 | extern int rom8,wrp,uben; |
| 39 | extern char uart_dev1[], uart_dev2[]; |
| 40 | |
| 41 | int dumbio = 0; /* normal, smart, terminal oriented IO by default */ |
| 42 | |
| 43 | /* MEC registers */ |
| 44 | #define MEC_START 0x01f80000 |
| 45 | #define MEC_END 0x01f80100 |
| 46 | |
| 47 | /* Memory exception waitstates */ |
| 48 | #define MEM_EX_WS 1 |
| 49 | |
| 50 | /* ERC32 always adds one waitstate during RAM std */ |
| 51 | #define STD_WS 1 |
| 52 | |
| 53 | #ifdef ERRINJ |
| 54 | extern int errmec; |
| 55 | #endif |
| 56 | |
| 57 | /* The target's byte order is big-endian by default until we load a |
| 58 | little-endian program. */ |
| 59 | |
| 60 | int current_target_byte_order = BIG_ENDIAN; |
| 61 | |
| 62 | #define MEC_WS 0 /* Waitstates per MEC access (0 ws) */ |
| 63 | #define MOK 0 |
| 64 | |
| 65 | /* MEC register addresses */ |
| 66 | |
| 67 | #define MEC_MCR 0x000 |
| 68 | #define MEC_SFR 0x004 |
| 69 | #define MEC_PWDR 0x008 |
| 70 | #define MEC_MEMCFG 0x010 |
| 71 | #define MEC_IOCR 0x014 |
| 72 | #define MEC_WCR 0x018 |
| 73 | |
| 74 | #define MEC_MAR0 0x020 |
| 75 | #define MEC_MAR1 0x024 |
| 76 | |
| 77 | #define MEC_SSA1 0x020 |
| 78 | #define MEC_SEA1 0x024 |
| 79 | #define MEC_SSA2 0x028 |
| 80 | #define MEC_SEA2 0x02C |
| 81 | #define MEC_ISR 0x044 |
| 82 | #define MEC_IPR 0x048 |
| 83 | #define MEC_IMR 0x04C |
| 84 | #define MEC_ICR 0x050 |
| 85 | #define MEC_IFR 0x054 |
| 86 | #define MEC_WDOG 0x060 |
| 87 | #define MEC_TRAPD 0x064 |
| 88 | #define MEC_RTC_COUNTER 0x080 |
| 89 | #define MEC_RTC_RELOAD 0x080 |
| 90 | #define MEC_RTC_SCALER 0x084 |
| 91 | #define MEC_GPT_COUNTER 0x088 |
| 92 | #define MEC_GPT_RELOAD 0x088 |
| 93 | #define MEC_GPT_SCALER 0x08C |
| 94 | #define MEC_TIMER_CTRL 0x098 |
| 95 | #define MEC_SFSR 0x0A0 |
| 96 | #define MEC_FFAR 0x0A4 |
| 97 | #define MEC_ERSR 0x0B0 |
| 98 | #define MEC_DBG 0x0C0 |
| 99 | #define MEC_TCR 0x0D0 |
| 100 | |
| 101 | #define MEC_BRK 0x0C4 |
| 102 | #define MEC_WPR 0x0C8 |
| 103 | |
| 104 | #define MEC_UARTA 0x0E0 |
| 105 | #define MEC_UARTB 0x0E4 |
| 106 | #define MEC_UART_CTRL 0x0E8 |
| 107 | #define SIM_LOAD 0x0F0 |
| 108 | |
| 109 | /* Memory exception causes */ |
| 110 | #define PROT_EXC 0x3 |
| 111 | #define UIMP_ACC 0x4 |
| 112 | #define MEC_ACC 0x6 |
| 113 | #define WATCH_EXC 0xa |
| 114 | #define BREAK_EXC 0xb |
| 115 | |
| 116 | /* Size of UART buffers (bytes) */ |
| 117 | #define UARTBUF 1024 |
| 118 | |
| 119 | /* Number of simulator ticks between flushing the UARTS. */ |
| 120 | /* For good performance, keep above 1000 */ |
| 121 | #define UART_FLUSH_TIME 3000 |
| 122 | |
| 123 | /* MEC timer control register bits */ |
| 124 | #define TCR_GACR 1 |
| 125 | #define TCR_GACL 2 |
| 126 | #define TCR_GASE 4 |
| 127 | #define TCR_GASL 8 |
| 128 | #define TCR_TCRCR 0x100 |
| 129 | #define TCR_TCRCL 0x200 |
| 130 | #define TCR_TCRSE 0x400 |
| 131 | #define TCR_TCRSL 0x800 |
| 132 | |
| 133 | /* New uart defines */ |
| 134 | #define UART_TX_TIME 1000 |
| 135 | #define UART_RX_TIME 1000 |
| 136 | #define UARTA_DR 0x1 |
| 137 | #define UARTA_SRE 0x2 |
| 138 | #define UARTA_HRE 0x4 |
| 139 | #define UARTA_OR 0x40 |
| 140 | #define UARTA_CLR 0x80 |
| 141 | #define UARTB_DR 0x10000 |
| 142 | #define UARTB_SRE 0x20000 |
| 143 | #define UARTB_HRE 0x40000 |
| 144 | #define UARTB_OR 0x400000 |
| 145 | #define UARTB_CLR 0x800000 |
| 146 | |
| 147 | #define UART_DR 0x100 |
| 148 | #define UART_TSE 0x200 |
| 149 | #define UART_THE 0x400 |
| 150 | |
| 151 | /* MEC registers */ |
| 152 | |
| 153 | static char fname[256]; |
| 154 | static int32 find = 0; |
| 155 | static uint32 mec_ssa[2]; /* Write protection start address */ |
| 156 | static uint32 mec_sea[2]; /* Write protection end address */ |
| 157 | static uint32 mec_wpr[2]; /* Write protection control fields */ |
| 158 | static uint32 mec_sfsr; |
| 159 | static uint32 mec_ffar; |
| 160 | static uint32 mec_ipr; |
| 161 | static uint32 mec_imr; |
| 162 | static uint32 mec_isr; |
| 163 | static uint32 mec_icr; |
| 164 | static uint32 mec_ifr; |
| 165 | static uint32 mec_mcr; /* MEC control register */ |
| 166 | static uint32 mec_memcfg; /* Memory control register */ |
| 167 | static uint32 mec_wcr; /* MEC waitstate register */ |
| 168 | static uint32 mec_iocr; /* MEC IO control register */ |
| 169 | static uint32 posted_irq; |
| 170 | static uint32 mec_ersr; /* MEC error and status register */ |
| 171 | static uint32 mec_tcr; /* MEC test comtrol register */ |
| 172 | |
| 173 | static uint32 rtc_counter; |
| 174 | static uint32 rtc_reload; |
| 175 | static uint32 rtc_scaler; |
| 176 | static uint32 rtc_scaler_start; |
| 177 | static uint32 rtc_enabled; |
| 178 | static uint32 rtc_cr; |
| 179 | static uint32 rtc_se; |
| 180 | |
| 181 | static uint32 gpt_counter; |
| 182 | static uint32 gpt_reload; |
| 183 | static uint32 gpt_scaler; |
| 184 | static uint32 gpt_scaler_start; |
| 185 | static uint32 gpt_enabled; |
| 186 | static uint32 gpt_cr; |
| 187 | static uint32 gpt_se; |
| 188 | |
| 189 | static uint32 wdog_scaler; |
| 190 | static uint32 wdog_counter; |
| 191 | static uint32 wdog_rst_delay; |
| 192 | static uint32 wdog_rston; |
| 193 | |
| 194 | enum wdog_type { |
| 195 | init, disabled, enabled, stopped |
| 196 | }; |
| 197 | |
| 198 | static enum wdog_type wdog_status; |
| 199 | |
| 200 | |
| 201 | /* ROM size 1024 Kbyte */ |
| 202 | #define ROM_SZ 0x100000 |
| 203 | #define ROM_MASK 0x0fffff |
| 204 | |
| 205 | /* RAM size 4 Mbyte */ |
| 206 | #define RAM_START 0x02000000 |
| 207 | #define RAM_END 0x02400000 |
| 208 | #define RAM_MASK 0x003fffff |
| 209 | |
| 210 | /* SPARClite boards all seem to have RAM at the same place. */ |
| 211 | #define RAM_START_SLITE 0x40000000 |
| 212 | #define RAM_END_SLITE 0x40400000 |
| 213 | #define RAM_MASK_SLITE 0x003fffff |
| 214 | |
| 215 | /* Memory support variables */ |
| 216 | |
| 217 | static uint32 mem_ramr_ws; /* RAM read waitstates */ |
| 218 | static uint32 mem_ramw_ws; /* RAM write waitstates */ |
| 219 | static uint32 mem_romr_ws; /* ROM read waitstates */ |
| 220 | static uint32 mem_romw_ws; /* ROM write waitstates */ |
| 221 | static uint32 mem_ramstart; /* RAM start */ |
| 222 | static uint32 mem_ramend; /* RAM end */ |
| 223 | static uint32 mem_rammask; /* RAM address mask */ |
| 224 | static uint32 mem_ramsz; /* RAM size */ |
| 225 | static uint32 mem_romsz; /* ROM size */ |
| 226 | static uint32 mem_accprot; /* RAM write protection enabled */ |
| 227 | static uint32 mem_blockprot; /* RAM block write protection enabled */ |
| 228 | |
| 229 | static unsigned char romb[ROM_SZ]; |
| 230 | static unsigned char ramb[RAM_END - RAM_START]; |
| 231 | |
| 232 | |
| 233 | /* UART support variables */ |
| 234 | |
| 235 | static int32 fd1, fd2; /* file descriptor for input file */ |
| 236 | static int32 Ucontrol; /* UART status register */ |
| 237 | static unsigned char aq[UARTBUF], bq[UARTBUF]; |
| 238 | static int32 anum, aind = 0; |
| 239 | static int32 bnum, bind = 0; |
| 240 | static char wbufa[UARTBUF], wbufb[UARTBUF]; |
| 241 | static unsigned wnuma; |
| 242 | static unsigned wnumb; |
| 243 | static FILE *f1in, *f1out, *f2in, *f2out; |
| 244 | static struct termios ioc1, ioc2, iocold1, iocold2; |
| 245 | static int f1open = 0, f2open = 0; |
| 246 | |
| 247 | static char uarta_sreg, uarta_hreg, uartb_sreg, uartb_hreg; |
| 248 | static uint32 uart_stat_reg; |
| 249 | static uint32 uarta_data, uartb_data; |
| 250 | |
| 251 | #ifdef ERA |
| 252 | int era = 0; |
| 253 | int erareg; |
| 254 | #endif |
| 255 | |
| 256 | /* Forward declarations */ |
| 257 | |
| 258 | static void decode_ersr PARAMS ((void)); |
| 259 | #ifdef ERRINJ |
| 260 | static void iucomperr PARAMS ((void)); |
| 261 | #endif |
| 262 | static void mecparerror PARAMS ((void)); |
| 263 | static void decode_memcfg PARAMS ((void)); |
| 264 | static void decode_wcr PARAMS ((void)); |
| 265 | static void decode_mcr PARAMS ((void)); |
| 266 | static void close_port PARAMS ((void)); |
| 267 | static void mec_reset PARAMS ((void)); |
| 268 | static void mec_intack PARAMS ((int32 level)); |
| 269 | static void chk_irq PARAMS ((void)); |
| 270 | static void mec_irq PARAMS ((int32 level)); |
| 271 | static void set_sfsr PARAMS ((uint32 fault, uint32 addr, |
| 272 | uint32 asi, uint32 read)); |
| 273 | static int32 mec_read PARAMS ((uint32 addr, uint32 asi, uint32 *data)); |
| 274 | static int mec_write PARAMS ((uint32 addr, uint32 data)); |
| 275 | static void port_init PARAMS ((void)); |
| 276 | static uint32 read_uart PARAMS ((uint32 addr)); |
| 277 | static void write_uart PARAMS ((uint32 addr, uint32 data)); |
| 278 | static void flush_uart PARAMS ((void)); |
| 279 | static void uarta_tx PARAMS ((void)); |
| 280 | static void uartb_tx PARAMS ((void)); |
| 281 | static void uart_rx PARAMS ((caddr_t arg)); |
| 282 | static void uart_intr PARAMS ((caddr_t arg)); |
| 283 | static void uart_irq_start PARAMS ((void)); |
| 284 | static void wdog_intr PARAMS ((caddr_t arg)); |
| 285 | static void wdog_start PARAMS ((void)); |
| 286 | static void rtc_intr PARAMS ((caddr_t arg)); |
| 287 | static void rtc_start PARAMS ((void)); |
| 288 | static uint32 rtc_counter_read PARAMS ((void)); |
| 289 | static void rtc_scaler_set PARAMS ((uint32 val)); |
| 290 | static void rtc_reload_set PARAMS ((uint32 val)); |
| 291 | static void gpt_intr PARAMS ((caddr_t arg)); |
| 292 | static void gpt_start PARAMS ((void)); |
| 293 | static uint32 gpt_counter_read PARAMS ((void)); |
| 294 | static void gpt_scaler_set PARAMS ((uint32 val)); |
| 295 | static void gpt_reload_set PARAMS ((uint32 val)); |
| 296 | static void timer_ctrl PARAMS ((uint32 val)); |
| 297 | static unsigned char * |
| 298 | get_mem_ptr PARAMS ((uint32 addr, uint32 size)); |
| 299 | |
| 300 | static void fetch_bytes PARAMS ((int asi, unsigned char *mem, |
| 301 | uint32 *data, int sz)); |
| 302 | |
| 303 | static void store_bytes PARAMS ((unsigned char *mem, uint32 *data, int sz)); |
| 304 | |
| 305 | extern int ext_irl; |
| 306 | |
| 307 | |
| 308 | /* One-time init */ |
| 309 | |
| 310 | void |
| 311 | init_sim() |
| 312 | { |
| 313 | port_init(); |
| 314 | } |
| 315 | |
| 316 | /* Power-on reset init */ |
| 317 | |
| 318 | void |
| 319 | reset() |
| 320 | { |
| 321 | mec_reset(); |
| 322 | uart_irq_start(); |
| 323 | wdog_start(); |
| 324 | } |
| 325 | |
| 326 | static void |
| 327 | decode_ersr() |
| 328 | { |
| 329 | if (mec_ersr & 0x01) { |
| 330 | if (!(mec_mcr & 0x20)) { |
| 331 | if (mec_mcr & 0x40) { |
| 332 | sys_reset(); |
| 333 | mec_ersr = 0x8000; |
| 334 | if (sis_verbose) |
| 335 | printf("Error manager reset - IU in error mode\n"); |
| 336 | } else { |
| 337 | sys_halt(); |
| 338 | mec_ersr |= 0x2000; |
| 339 | if (sis_verbose) |
| 340 | printf("Error manager halt - IU in error mode\n"); |
| 341 | } |
| 342 | } else |
| 343 | mec_irq(1); |
| 344 | } |
| 345 | if (mec_ersr & 0x04) { |
| 346 | if (!(mec_mcr & 0x200)) { |
| 347 | if (mec_mcr & 0x400) { |
| 348 | sys_reset(); |
| 349 | mec_ersr = 0x8000; |
| 350 | if (sis_verbose) |
| 351 | printf("Error manager reset - IU comparison error\n"); |
| 352 | } else { |
| 353 | sys_halt(); |
| 354 | mec_ersr |= 0x2000; |
| 355 | if (sis_verbose) |
| 356 | printf("Error manager halt - IU comparison error\n"); |
| 357 | } |
| 358 | } else |
| 359 | mec_irq(1); |
| 360 | } |
| 361 | if (mec_ersr & 0x20) { |
| 362 | if (!(mec_mcr & 0x2000)) { |
| 363 | if (mec_mcr & 0x4000) { |
| 364 | sys_reset(); |
| 365 | mec_ersr = 0x8000; |
| 366 | if (sis_verbose) |
| 367 | printf("Error manager reset - MEC hardware error\n"); |
| 368 | } else { |
| 369 | sys_halt(); |
| 370 | mec_ersr |= 0x2000; |
| 371 | if (sis_verbose) |
| 372 | printf("Error manager halt - MEC hardware error\n"); |
| 373 | } |
| 374 | } else |
| 375 | mec_irq(1); |
| 376 | } |
| 377 | } |
| 378 | |
| 379 | #ifdef ERRINJ |
| 380 | static void |
| 381 | iucomperr() |
| 382 | { |
| 383 | mec_ersr |= 0x04; |
| 384 | decode_ersr(); |
| 385 | } |
| 386 | #endif |
| 387 | |
| 388 | static void |
| 389 | mecparerror() |
| 390 | { |
| 391 | mec_ersr |= 0x20; |
| 392 | decode_ersr(); |
| 393 | } |
| 394 | |
| 395 | |
| 396 | /* IU error mode manager */ |
| 397 | |
| 398 | void |
| 399 | error_mode(pc) |
| 400 | uint32 pc; |
| 401 | { |
| 402 | |
| 403 | mec_ersr |= 0x1; |
| 404 | decode_ersr(); |
| 405 | } |
| 406 | |
| 407 | |
| 408 | /* Check memory settings */ |
| 409 | |
| 410 | static void |
| 411 | decode_memcfg() |
| 412 | { |
| 413 | if (rom8) mec_memcfg &= ~0x20000; |
| 414 | else mec_memcfg |= 0x20000; |
| 415 | |
| 416 | mem_ramsz = (256 * 1024) << ((mec_memcfg >> 10) & 7); |
| 417 | mem_romsz = (128 * 1024) << ((mec_memcfg >> 18) & 7); |
| 418 | |
| 419 | if (sparclite_board) { |
| 420 | mem_ramstart = RAM_START_SLITE; |
| 421 | mem_ramend = RAM_END_SLITE; |
| 422 | mem_rammask = RAM_MASK_SLITE; |
| 423 | } |
| 424 | else { |
| 425 | mem_ramstart = RAM_START; |
| 426 | mem_ramend = RAM_END; |
| 427 | mem_rammask = RAM_MASK; |
| 428 | } |
| 429 | if (sis_verbose) |
| 430 | printf("RAM start: 0x%x, RAM size: %d K, ROM size: %d K\n", |
| 431 | mem_ramstart, mem_ramsz >> 10, mem_romsz >> 10); |
| 432 | } |
| 433 | |
| 434 | static void |
| 435 | decode_wcr() |
| 436 | { |
| 437 | mem_ramr_ws = mec_wcr & 3; |
| 438 | mem_ramw_ws = (mec_wcr >> 2) & 3; |
| 439 | mem_romr_ws = (mec_wcr >> 4) & 0x0f; |
| 440 | if (rom8) { |
| 441 | if (mem_romr_ws > 0 ) mem_romr_ws--; |
| 442 | mem_romr_ws = 5 + (4*mem_romr_ws); |
| 443 | } |
| 444 | mem_romw_ws = (mec_wcr >> 8) & 0x0f; |
| 445 | if (sis_verbose) |
| 446 | printf("Waitstates = RAM read: %d, RAM write: %d, ROM read: %d, ROM write: %d\n", |
| 447 | mem_ramr_ws, mem_ramw_ws, mem_romr_ws, mem_romw_ws); |
| 448 | } |
| 449 | |
| 450 | static void |
| 451 | decode_mcr() |
| 452 | { |
| 453 | mem_accprot = (mec_wpr[0] | mec_wpr[1]); |
| 454 | mem_blockprot = (mec_mcr >> 3) & 1; |
| 455 | if (sis_verbose && mem_accprot) |
| 456 | printf("Memory block write protection enabled\n"); |
| 457 | if (mec_mcr & 0x08000) { |
| 458 | mec_ersr |= 0x20; |
| 459 | decode_ersr(); |
| 460 | } |
| 461 | if (sis_verbose && (mec_mcr & 2)) |
| 462 | printf("Software reset enabled\n"); |
| 463 | if (sis_verbose && (mec_mcr & 1)) |
| 464 | printf("Power-down mode enabled\n"); |
| 465 | } |
| 466 | |
| 467 | /* Flush ports when simulator stops */ |
| 468 | |
| 469 | void |
| 470 | sim_halt() |
| 471 | { |
| 472 | #ifdef FAST_UART |
| 473 | flush_uart(); |
| 474 | #endif |
| 475 | } |
| 476 | |
| 477 | int |
| 478 | sim_stop(SIM_DESC sd) |
| 479 | { |
| 480 | ctrl_c = 1; |
| 481 | return 1; |
| 482 | } |
| 483 | |
| 484 | static void |
| 485 | close_port() |
| 486 | { |
| 487 | if (f1open && f1in != stdin) |
| 488 | fclose(f1in); |
| 489 | if (f2open && f2in != stdin) |
| 490 | fclose(f2in); |
| 491 | } |
| 492 | |
| 493 | void |
| 494 | exit_sim() |
| 495 | { |
| 496 | close_port(); |
| 497 | } |
| 498 | |
| 499 | static void |
| 500 | mec_reset() |
| 501 | { |
| 502 | int i; |
| 503 | |
| 504 | find = 0; |
| 505 | for (i = 0; i < 2; i++) |
| 506 | mec_ssa[i] = mec_sea[i] = mec_wpr[i] = 0; |
| 507 | mec_mcr = 0x01350014; |
| 508 | mec_iocr = 0; |
| 509 | mec_sfsr = 0x078; |
| 510 | mec_ffar = 0; |
| 511 | mec_ipr = 0; |
| 512 | mec_imr = 0x7ffe; |
| 513 | mec_isr = 0; |
| 514 | mec_icr = 0; |
| 515 | mec_ifr = 0; |
| 516 | mec_memcfg = 0x10000; |
| 517 | mec_wcr = -1; |
| 518 | mec_ersr = 0; /* MEC error and status register */ |
| 519 | mec_tcr = 0; /* MEC test comtrol register */ |
| 520 | |
| 521 | decode_memcfg(); |
| 522 | decode_wcr(); |
| 523 | decode_mcr(); |
| 524 | |
| 525 | posted_irq = 0; |
| 526 | wnuma = wnumb = 0; |
| 527 | anum = aind = bnum = bind = 0; |
| 528 | |
| 529 | uart_stat_reg = UARTA_SRE | UARTA_HRE | UARTB_SRE | UARTB_HRE; |
| 530 | uarta_data = uartb_data = UART_THE | UART_TSE; |
| 531 | |
| 532 | rtc_counter = 0xffffffff; |
| 533 | rtc_reload = 0xffffffff; |
| 534 | rtc_scaler = 0xff; |
| 535 | rtc_enabled = 0; |
| 536 | rtc_cr = 0; |
| 537 | rtc_se = 0; |
| 538 | |
| 539 | gpt_counter = 0xffffffff; |
| 540 | gpt_reload = 0xffffffff; |
| 541 | gpt_scaler = 0xffff; |
| 542 | gpt_enabled = 0; |
| 543 | gpt_cr = 0; |
| 544 | gpt_se = 0; |
| 545 | |
| 546 | wdog_scaler = 255; |
| 547 | wdog_rst_delay = 255; |
| 548 | wdog_counter = 0xffff; |
| 549 | wdog_rston = 0; |
| 550 | wdog_status = init; |
| 551 | |
| 552 | #ifdef ERA |
| 553 | erareg = 0; |
| 554 | #endif |
| 555 | |
| 556 | } |
| 557 | |
| 558 | |
| 559 | |
| 560 | static void |
| 561 | mec_intack(level) |
| 562 | int32 level; |
| 563 | { |
| 564 | int irq_test; |
| 565 | |
| 566 | if (sis_verbose) |
| 567 | printf("interrupt %d acknowledged\n", level); |
| 568 | irq_test = mec_tcr & 0x80000; |
| 569 | if ((irq_test) && (mec_ifr & (1 << level))) |
| 570 | mec_ifr &= ~(1 << level); |
| 571 | else |
| 572 | mec_ipr &= ~(1 << level); |
| 573 | chk_irq(); |
| 574 | } |
| 575 | |
| 576 | static void |
| 577 | chk_irq() |
| 578 | { |
| 579 | int32 i; |
| 580 | uint32 itmp; |
| 581 | int old_irl; |
| 582 | |
| 583 | old_irl = ext_irl; |
| 584 | if (mec_tcr & 0x80000) itmp = mec_ifr; |
| 585 | else itmp = 0; |
| 586 | itmp = ((mec_ipr | itmp) & ~mec_imr) & 0x0fffe; |
| 587 | ext_irl = 0; |
| 588 | if (itmp != 0) { |
| 589 | for (i = 15; i > 0; i--) { |
| 590 | if (((itmp >> i) & 1) != 0) { |
| 591 | if ((sis_verbose) && (i > old_irl)) |
| 592 | printf("IU irl: %d\n", i); |
| 593 | ext_irl = i; |
| 594 | set_int(i, mec_intack, i); |
| 595 | break; |
| 596 | } |
| 597 | } |
| 598 | } |
| 599 | } |
| 600 | |
| 601 | static void |
| 602 | mec_irq(level) |
| 603 | int32 level; |
| 604 | { |
| 605 | mec_ipr |= (1 << level); |
| 606 | chk_irq(); |
| 607 | } |
| 608 | |
| 609 | static void |
| 610 | set_sfsr(fault, addr, asi, read) |
| 611 | uint32 fault; |
| 612 | uint32 addr; |
| 613 | uint32 asi; |
| 614 | uint32 read; |
| 615 | { |
| 616 | if ((asi == 0xa) || (asi == 0xb)) { |
| 617 | mec_ffar = addr; |
| 618 | mec_sfsr = (fault << 3) | (!read << 15); |
| 619 | mec_sfsr |= ((mec_sfsr & 1) ^ 1) | (mec_sfsr & 1); |
| 620 | switch (asi) { |
| 621 | case 0xa: |
| 622 | mec_sfsr |= 0x0004; |
| 623 | break; |
| 624 | case 0xb: |
| 625 | mec_sfsr |= 0x1004; |
| 626 | break; |
| 627 | } |
| 628 | } |
| 629 | } |
| 630 | |
| 631 | static int32 |
| 632 | mec_read(addr, asi, data) |
| 633 | uint32 addr; |
| 634 | uint32 asi; |
| 635 | uint32 *data; |
| 636 | { |
| 637 | |
| 638 | switch (addr & 0x0ff) { |
| 639 | |
| 640 | case MEC_MCR: /* 0x00 */ |
| 641 | *data = mec_mcr; |
| 642 | break; |
| 643 | |
| 644 | case MEC_MEMCFG: /* 0x10 */ |
| 645 | *data = mec_memcfg; |
| 646 | break; |
| 647 | |
| 648 | case MEC_IOCR: |
| 649 | *data = mec_iocr; /* 0x14 */ |
| 650 | break; |
| 651 | |
| 652 | case MEC_SSA1: /* 0x20 */ |
| 653 | *data = mec_ssa[0] | (mec_wpr[0] << 23); |
| 654 | break; |
| 655 | case MEC_SEA1: /* 0x24 */ |
| 656 | *data = mec_sea[0]; |
| 657 | break; |
| 658 | case MEC_SSA2: /* 0x28 */ |
| 659 | *data = mec_ssa[1] | (mec_wpr[1] << 23); |
| 660 | break; |
| 661 | case MEC_SEA2: /* 0x2c */ |
| 662 | *data = mec_sea[1]; |
| 663 | break; |
| 664 | |
| 665 | case MEC_ISR: /* 0x44 */ |
| 666 | *data = mec_isr; |
| 667 | break; |
| 668 | |
| 669 | case MEC_IPR: /* 0x48 */ |
| 670 | *data = mec_ipr; |
| 671 | break; |
| 672 | |
| 673 | case MEC_IMR: /* 0x4c */ |
| 674 | *data = mec_imr; |
| 675 | break; |
| 676 | |
| 677 | case MEC_IFR: /* 0x54 */ |
| 678 | *data = mec_ifr; |
| 679 | break; |
| 680 | |
| 681 | case MEC_RTC_COUNTER: /* 0x80 */ |
| 682 | *data = rtc_counter_read(); |
| 683 | break; |
| 684 | case MEC_RTC_SCALER: /* 0x84 */ |
| 685 | if (rtc_enabled) |
| 686 | *data = rtc_scaler - (now() - rtc_scaler_start); |
| 687 | else |
| 688 | *data = rtc_scaler; |
| 689 | break; |
| 690 | |
| 691 | case MEC_GPT_COUNTER: /* 0x88 */ |
| 692 | *data = gpt_counter_read(); |
| 693 | break; |
| 694 | |
| 695 | case MEC_GPT_SCALER: /* 0x8c */ |
| 696 | if (rtc_enabled) |
| 697 | *data = gpt_scaler - (now() - gpt_scaler_start); |
| 698 | else |
| 699 | *data = gpt_scaler; |
| 700 | break; |
| 701 | |
| 702 | |
| 703 | case MEC_SFSR: /* 0xA0 */ |
| 704 | *data = mec_sfsr; |
| 705 | break; |
| 706 | |
| 707 | case MEC_FFAR: /* 0xA4 */ |
| 708 | *data = mec_ffar; |
| 709 | break; |
| 710 | |
| 711 | case SIM_LOAD: |
| 712 | fname[find] = 0; |
| 713 | if (find == 0) |
| 714 | strcpy(fname, "simload"); |
| 715 | find = bfd_load(fname); |
| 716 | if (find == -1) |
| 717 | *data = 0; |
| 718 | else |
| 719 | *data = 1; |
| 720 | find = 0; |
| 721 | break; |
| 722 | |
| 723 | case MEC_ERSR: /* 0xB0 */ |
| 724 | *data = mec_ersr; |
| 725 | break; |
| 726 | |
| 727 | case MEC_TCR: /* 0xD0 */ |
| 728 | *data = mec_tcr; |
| 729 | break; |
| 730 | |
| 731 | case MEC_UARTA: /* 0xE0 */ |
| 732 | case MEC_UARTB: /* 0xE4 */ |
| 733 | if (asi != 0xb) { |
| 734 | set_sfsr(MEC_ACC, addr, asi, 1); |
| 735 | return (1); |
| 736 | } |
| 737 | *data = read_uart(addr); |
| 738 | break; |
| 739 | |
| 740 | case MEC_UART_CTRL: /* 0xE8 */ |
| 741 | |
| 742 | *data = read_uart(addr); |
| 743 | break; |
| 744 | |
| 745 | default: |
| 746 | set_sfsr(MEC_ACC, addr, asi, 1); |
| 747 | return (1); |
| 748 | break; |
| 749 | } |
| 750 | return (MOK); |
| 751 | } |
| 752 | |
| 753 | static int |
| 754 | mec_write(addr, data) |
| 755 | uint32 addr; |
| 756 | uint32 data; |
| 757 | { |
| 758 | if (sis_verbose > 1) |
| 759 | printf("MEC write a: %08x, d: %08x\n",addr,data); |
| 760 | switch (addr & 0x0ff) { |
| 761 | |
| 762 | case MEC_MCR: |
| 763 | mec_mcr = data; |
| 764 | decode_mcr(); |
| 765 | if (mec_mcr & 0x08000) mecparerror(); |
| 766 | break; |
| 767 | |
| 768 | case MEC_SFR: |
| 769 | if (mec_mcr & 0x2) { |
| 770 | sys_reset(); |
| 771 | mec_ersr = 0x4000; |
| 772 | if (sis_verbose) |
| 773 | printf(" Software reset issued\n"); |
| 774 | } |
| 775 | break; |
| 776 | |
| 777 | case MEC_IOCR: |
| 778 | mec_iocr = data; |
| 779 | if (mec_iocr & 0xC0C0C0C0) mecparerror(); |
| 780 | break; |
| 781 | |
| 782 | case MEC_SSA1: /* 0x20 */ |
| 783 | if (data & 0xFE000000) mecparerror(); |
| 784 | mec_ssa[0] = data & 0x7fffff; |
| 785 | mec_wpr[0] = (data >> 23) & 0x03; |
| 786 | mem_accprot = mec_wpr[0] || mec_wpr[1]; |
| 787 | if (sis_verbose && mec_wpr[0]) |
| 788 | printf("Segment 1 memory protection enabled (0x02%06x - 0x02%06x)\n", |
| 789 | mec_ssa[0] << 2, mec_sea[0] << 2); |
| 790 | break; |
| 791 | case MEC_SEA1: /* 0x24 */ |
| 792 | if (data & 0xFF800000) mecparerror(); |
| 793 | mec_sea[0] = data & 0x7fffff; |
| 794 | break; |
| 795 | case MEC_SSA2: /* 0x28 */ |
| 796 | if (data & 0xFE000000) mecparerror(); |
| 797 | mec_ssa[1] = data & 0x7fffff; |
| 798 | mec_wpr[1] = (data >> 23) & 0x03; |
| 799 | mem_accprot = mec_wpr[0] || mec_wpr[1]; |
| 800 | if (sis_verbose && mec_wpr[1]) |
| 801 | printf("Segment 2 memory protection enabled (0x02%06x - 0x02%06x)\n", |
| 802 | mec_ssa[1] << 2, mec_sea[1] << 2); |
| 803 | break; |
| 804 | case MEC_SEA2: /* 0x2c */ |
| 805 | if (data & 0xFF800000) mecparerror(); |
| 806 | mec_sea[1] = data & 0x7fffff; |
| 807 | break; |
| 808 | |
| 809 | case MEC_UARTA: |
| 810 | case MEC_UARTB: |
| 811 | if (data & 0xFFFFFF00) mecparerror(); |
| 812 | case MEC_UART_CTRL: |
| 813 | if (data & 0xFF00FF00) mecparerror(); |
| 814 | write_uart(addr, data); |
| 815 | break; |
| 816 | |
| 817 | case MEC_GPT_RELOAD: |
| 818 | gpt_reload_set(data); |
| 819 | break; |
| 820 | |
| 821 | case MEC_GPT_SCALER: |
| 822 | if (data & 0xFFFF0000) mecparerror(); |
| 823 | gpt_scaler_set(data); |
| 824 | break; |
| 825 | |
| 826 | case MEC_TIMER_CTRL: |
| 827 | if (data & 0xFFFFF0F0) mecparerror(); |
| 828 | timer_ctrl(data); |
| 829 | break; |
| 830 | |
| 831 | case MEC_RTC_RELOAD: |
| 832 | rtc_reload_set(data); |
| 833 | break; |
| 834 | |
| 835 | case MEC_RTC_SCALER: |
| 836 | if (data & 0xFFFFFF00) mecparerror(); |
| 837 | rtc_scaler_set(data); |
| 838 | break; |
| 839 | |
| 840 | case MEC_SFSR: /* 0xA0 */ |
| 841 | if (data & 0xFFFF0880) mecparerror(); |
| 842 | mec_sfsr = 0x78; |
| 843 | break; |
| 844 | |
| 845 | case MEC_ISR: |
| 846 | if (data & 0xFFFFE000) mecparerror(); |
| 847 | mec_isr = data; |
| 848 | break; |
| 849 | |
| 850 | case MEC_IMR: /* 0x4c */ |
| 851 | |
| 852 | if (data & 0xFFFF8001) mecparerror(); |
| 853 | mec_imr = data & 0x7ffe; |
| 854 | chk_irq(); |
| 855 | break; |
| 856 | |
| 857 | case MEC_ICR: /* 0x50 */ |
| 858 | |
| 859 | if (data & 0xFFFF0001) mecparerror(); |
| 860 | mec_ipr &= ~data & 0x0fffe; |
| 861 | chk_irq(); |
| 862 | break; |
| 863 | |
| 864 | case MEC_IFR: /* 0x54 */ |
| 865 | |
| 866 | if (mec_tcr & 0x080000) { |
| 867 | if (data & 0xFFFF0001) mecparerror(); |
| 868 | mec_ifr = data & 0xfffe; |
| 869 | chk_irq(); |
| 870 | } |
| 871 | break; |
| 872 | case SIM_LOAD: |
| 873 | fname[find++] = (char) data; |
| 874 | break; |
| 875 | |
| 876 | |
| 877 | case MEC_MEMCFG: /* 0x10 */ |
| 878 | if (data & 0xC0E08000) mecparerror(); |
| 879 | mec_memcfg = data; |
| 880 | decode_memcfg(); |
| 881 | if (mec_memcfg & 0xc0e08000) |
| 882 | mecparerror(); |
| 883 | break; |
| 884 | |
| 885 | case MEC_WCR: /* 0x18 */ |
| 886 | mec_wcr = data; |
| 887 | decode_wcr(); |
| 888 | break; |
| 889 | |
| 890 | case MEC_ERSR: /* 0xB0 */ |
| 891 | if (mec_tcr & 0x100000) |
| 892 | if (data & 0xFFFFEFC0) mecparerror(); |
| 893 | mec_ersr = data & 0x103f; |
| 894 | break; |
| 895 | |
| 896 | case MEC_TCR: /* 0xD0 */ |
| 897 | if (data & 0xFFE1FFC0) mecparerror(); |
| 898 | mec_tcr = data & 0x1e003f; |
| 899 | break; |
| 900 | |
| 901 | case MEC_WDOG: /* 0x60 */ |
| 902 | wdog_scaler = (data >> 16) & 0x0ff; |
| 903 | wdog_counter = data & 0x0ffff; |
| 904 | wdog_rst_delay = data >> 24; |
| 905 | wdog_rston = 0; |
| 906 | if (wdog_status == stopped) |
| 907 | wdog_start(); |
| 908 | wdog_status = enabled; |
| 909 | break; |
| 910 | |
| 911 | case MEC_TRAPD: /* 0x64 */ |
| 912 | if (wdog_status == init) { |
| 913 | wdog_status = disabled; |
| 914 | if (sis_verbose) |
| 915 | printf("Watchdog disabled\n"); |
| 916 | } |
| 917 | break; |
| 918 | |
| 919 | case MEC_PWDR: |
| 920 | if (mec_mcr & 1) |
| 921 | wait_for_irq(); |
| 922 | break; |
| 923 | |
| 924 | default: |
| 925 | set_sfsr(MEC_ACC, addr, 0xb, 0); |
| 926 | return (1); |
| 927 | break; |
| 928 | } |
| 929 | return (MOK); |
| 930 | } |
| 931 | |
| 932 | |
| 933 | /* MEC UARTS */ |
| 934 | |
| 935 | static int ifd1 = -1, ifd2 = -1, ofd1 = -1, ofd2 = -1; |
| 936 | |
| 937 | void |
| 938 | init_stdio() |
| 939 | { |
| 940 | if (dumbio) |
| 941 | return; /* do nothing */ |
| 942 | if (!ifd1) |
| 943 | tcsetattr(0, TCSANOW, &ioc1); |
| 944 | if (!ifd2) |
| 945 | tcsetattr(0, TCSANOW, &ioc2); |
| 946 | } |
| 947 | |
| 948 | void |
| 949 | restore_stdio() |
| 950 | { |
| 951 | if (dumbio) |
| 952 | return; /* do nothing */ |
| 953 | if (!ifd1) |
| 954 | tcsetattr(0, TCSANOW, &iocold1); |
| 955 | if (!ifd2) |
| 956 | tcsetattr(0, TCSANOW, &iocold2); |
| 957 | } |
| 958 | |
| 959 | #define DO_STDIO_READ( _fd_, _buf_, _len_ ) \ |
| 960 | ( dumbio \ |
| 961 | ? (0) /* no bytes read, no delay */ \ |
| 962 | : read( _fd_, _buf_, _len_ ) ) |
| 963 | |
| 964 | |
| 965 | static void |
| 966 | port_init() |
| 967 | { |
| 968 | |
| 969 | if (uben) { |
| 970 | f2in = stdin; |
| 971 | f1in = NULL; |
| 972 | f2out = stdout; |
| 973 | f1out = NULL; |
| 974 | } else { |
| 975 | f1in = stdin; |
| 976 | f2in = NULL; |
| 977 | f1out = stdout; |
| 978 | f2out = NULL; |
| 979 | } |
| 980 | if (uart_dev1[0] != 0) |
| 981 | if ((fd1 = open(uart_dev1, O_RDWR | O_NONBLOCK)) < 0) { |
| 982 | printf("Warning, couldn't open output device %s\n", uart_dev1); |
| 983 | } else { |
| 984 | if (sis_verbose) |
| 985 | printf("serial port A on %s\n", uart_dev1); |
| 986 | f1in = f1out = fdopen(fd1, "r+"); |
| 987 | setbuf(f1out, NULL); |
| 988 | f1open = 1; |
| 989 | } |
| 990 | if (f1in) ifd1 = fileno(f1in); |
| 991 | if (ifd1 == 0) { |
| 992 | if (sis_verbose) |
| 993 | printf("serial port A on stdin/stdout\n"); |
| 994 | if (!dumbio) { |
| 995 | tcgetattr(ifd1, &ioc1); |
| 996 | iocold1 = ioc1; |
| 997 | ioc1.c_lflag &= ~(ICANON | ECHO); |
| 998 | ioc1.c_cc[VMIN] = 0; |
| 999 | ioc1.c_cc[VTIME] = 0; |
| 1000 | } |
| 1001 | f1open = 1; |
| 1002 | } |
| 1003 | |
| 1004 | if (f1out) { |
| 1005 | ofd1 = fileno(f1out); |
| 1006 | if (!dumbio && ofd1 == 1) setbuf(f1out, NULL); |
| 1007 | } |
| 1008 | |
| 1009 | if (uart_dev2[0] != 0) |
| 1010 | if ((fd2 = open(uart_dev2, O_RDWR | O_NONBLOCK)) < 0) { |
| 1011 | printf("Warning, couldn't open output device %s\n", uart_dev2); |
| 1012 | } else { |
| 1013 | if (sis_verbose) |
| 1014 | printf("serial port B on %s\n", uart_dev2); |
| 1015 | f2in = f2out = fdopen(fd2, "r+"); |
| 1016 | setbuf(f2out, NULL); |
| 1017 | f2open = 1; |
| 1018 | } |
| 1019 | if (f2in) ifd2 = fileno(f2in); |
| 1020 | if (ifd2 == 0) { |
| 1021 | if (sis_verbose) |
| 1022 | printf("serial port B on stdin/stdout\n"); |
| 1023 | if (!dumbio) { |
| 1024 | tcgetattr(ifd2, &ioc2); |
| 1025 | iocold2 = ioc2; |
| 1026 | ioc2.c_lflag &= ~(ICANON | ECHO); |
| 1027 | ioc2.c_cc[VMIN] = 0; |
| 1028 | ioc2.c_cc[VTIME] = 0; |
| 1029 | } |
| 1030 | f2open = 1; |
| 1031 | } |
| 1032 | |
| 1033 | if (f2out) { |
| 1034 | ofd2 = fileno(f2out); |
| 1035 | if (!dumbio && ofd2 == 1) setbuf(f2out, NULL); |
| 1036 | } |
| 1037 | |
| 1038 | wnuma = wnumb = 0; |
| 1039 | |
| 1040 | } |
| 1041 | |
| 1042 | static uint32 |
| 1043 | read_uart(addr) |
| 1044 | uint32 addr; |
| 1045 | { |
| 1046 | |
| 1047 | unsigned tmp; |
| 1048 | |
| 1049 | tmp = 0; |
| 1050 | switch (addr & 0xff) { |
| 1051 | |
| 1052 | case 0xE0: /* UART 1 */ |
| 1053 | #ifndef _WIN32 |
| 1054 | #ifdef FAST_UART |
| 1055 | |
| 1056 | if (aind < anum) { |
| 1057 | if ((aind + 1) < anum) |
| 1058 | mec_irq(4); |
| 1059 | return (0x700 | (uint32) aq[aind++]); |
| 1060 | } else { |
| 1061 | if (f1open) { |
| 1062 | anum = DO_STDIO_READ(ifd1, aq, UARTBUF); |
| 1063 | } |
| 1064 | if (anum > 0) { |
| 1065 | aind = 0; |
| 1066 | if ((aind + 1) < anum) |
| 1067 | mec_irq(4); |
| 1068 | return (0x700 | (uint32) aq[aind++]); |
| 1069 | } else { |
| 1070 | return (0x600 | (uint32) aq[aind]); |
| 1071 | } |
| 1072 | |
| 1073 | } |
| 1074 | #else |
| 1075 | tmp = uarta_data; |
| 1076 | uarta_data &= ~UART_DR; |
| 1077 | uart_stat_reg &= ~UARTA_DR; |
| 1078 | return tmp; |
| 1079 | #endif |
| 1080 | #else |
| 1081 | return(0); |
| 1082 | #endif |
| 1083 | break; |
| 1084 | |
| 1085 | case 0xE4: /* UART 2 */ |
| 1086 | #ifndef _WIN32 |
| 1087 | #ifdef FAST_UART |
| 1088 | if (bind < bnum) { |
| 1089 | if ((bind + 1) < bnum) |
| 1090 | mec_irq(5); |
| 1091 | return (0x700 | (uint32) bq[bind++]); |
| 1092 | } else { |
| 1093 | if (f2open) { |
| 1094 | bnum = DO_STDIO_READ(ifd2, bq, UARTBUF); |
| 1095 | } |
| 1096 | if (bnum > 0) { |
| 1097 | bind = 0; |
| 1098 | if ((bind + 1) < bnum) |
| 1099 | mec_irq(5); |
| 1100 | return (0x700 | (uint32) bq[bind++]); |
| 1101 | } else { |
| 1102 | return (0x600 | (uint32) bq[bind]); |
| 1103 | } |
| 1104 | |
| 1105 | } |
| 1106 | #else |
| 1107 | tmp = uartb_data; |
| 1108 | uartb_data &= ~UART_DR; |
| 1109 | uart_stat_reg &= ~UARTB_DR; |
| 1110 | return tmp; |
| 1111 | #endif |
| 1112 | #else |
| 1113 | return(0); |
| 1114 | #endif |
| 1115 | break; |
| 1116 | |
| 1117 | case 0xE8: /* UART status register */ |
| 1118 | #ifndef _WIN32 |
| 1119 | #ifdef FAST_UART |
| 1120 | |
| 1121 | Ucontrol = 0; |
| 1122 | if (aind < anum) { |
| 1123 | Ucontrol |= 0x00000001; |
| 1124 | } else { |
| 1125 | if (f1open) { |
| 1126 | anum = DO_STDIO_READ(ifd1, aq, UARTBUF); |
| 1127 | } |
| 1128 | if (anum > 0) { |
| 1129 | Ucontrol |= 0x00000001; |
| 1130 | aind = 0; |
| 1131 | mec_irq(4); |
| 1132 | } |
| 1133 | } |
| 1134 | if (bind < bnum) { |
| 1135 | Ucontrol |= 0x00010000; |
| 1136 | } else { |
| 1137 | if (f2open) { |
| 1138 | bnum = DO_STDIO_READ(ifd2, bq, UARTBUF); |
| 1139 | } |
| 1140 | if (bnum > 0) { |
| 1141 | Ucontrol |= 0x00010000; |
| 1142 | bind = 0; |
| 1143 | mec_irq(5); |
| 1144 | } |
| 1145 | } |
| 1146 | |
| 1147 | Ucontrol |= 0x00060006; |
| 1148 | return (Ucontrol); |
| 1149 | #else |
| 1150 | return (uart_stat_reg); |
| 1151 | #endif |
| 1152 | #else |
| 1153 | return(0x00060006); |
| 1154 | #endif |
| 1155 | break; |
| 1156 | default: |
| 1157 | if (sis_verbose) |
| 1158 | printf("Read from unimplemented MEC register (%x)\n", addr); |
| 1159 | |
| 1160 | } |
| 1161 | return (0); |
| 1162 | } |
| 1163 | |
| 1164 | static void |
| 1165 | write_uart(addr, data) |
| 1166 | uint32 addr; |
| 1167 | uint32 data; |
| 1168 | { |
| 1169 | unsigned char c; |
| 1170 | |
| 1171 | c = (unsigned char) data; |
| 1172 | switch (addr & 0xff) { |
| 1173 | |
| 1174 | case 0xE0: /* UART A */ |
| 1175 | #ifdef FAST_UART |
| 1176 | if (f1open) { |
| 1177 | if (wnuma < UARTBUF) |
| 1178 | wbufa[wnuma++] = c; |
| 1179 | else { |
| 1180 | while (wnuma) |
| 1181 | wnuma -= fwrite(wbufa, 1, wnuma, f1out); |
| 1182 | wbufa[wnuma++] = c; |
| 1183 | } |
| 1184 | } |
| 1185 | mec_irq(4); |
| 1186 | #else |
| 1187 | if (uart_stat_reg & UARTA_SRE) { |
| 1188 | uarta_sreg = c; |
| 1189 | uart_stat_reg &= ~UARTA_SRE; |
| 1190 | event(uarta_tx, 0, UART_TX_TIME); |
| 1191 | } else { |
| 1192 | uarta_hreg = c; |
| 1193 | uart_stat_reg &= ~UARTA_HRE; |
| 1194 | } |
| 1195 | #endif |
| 1196 | break; |
| 1197 | |
| 1198 | case 0xE4: /* UART B */ |
| 1199 | #ifdef FAST_UART |
| 1200 | if (f2open) { |
| 1201 | if (wnumb < UARTBUF) |
| 1202 | wbufb[wnumb++] = c; |
| 1203 | else { |
| 1204 | while (wnumb) |
| 1205 | wnumb -= fwrite(wbufb, 1, wnumb, f2out); |
| 1206 | wbufb[wnumb++] = c; |
| 1207 | } |
| 1208 | } |
| 1209 | mec_irq(5); |
| 1210 | #else |
| 1211 | if (uart_stat_reg & UARTB_SRE) { |
| 1212 | uartb_sreg = c; |
| 1213 | uart_stat_reg &= ~UARTB_SRE; |
| 1214 | event(uartb_tx, 0, UART_TX_TIME); |
| 1215 | } else { |
| 1216 | uartb_hreg = c; |
| 1217 | uart_stat_reg &= ~UARTB_HRE; |
| 1218 | } |
| 1219 | #endif |
| 1220 | break; |
| 1221 | case 0xE8: /* UART status register */ |
| 1222 | #ifndef FAST_UART |
| 1223 | if (data & UARTA_CLR) { |
| 1224 | uart_stat_reg &= 0xFFFF0000; |
| 1225 | uart_stat_reg |= UARTA_SRE | UARTA_HRE; |
| 1226 | } |
| 1227 | if (data & UARTB_CLR) { |
| 1228 | uart_stat_reg &= 0x0000FFFF; |
| 1229 | uart_stat_reg |= UARTB_SRE | UARTB_HRE; |
| 1230 | } |
| 1231 | #endif |
| 1232 | break; |
| 1233 | default: |
| 1234 | if (sis_verbose) |
| 1235 | printf("Write to unimplemented MEC register (%x)\n", addr); |
| 1236 | |
| 1237 | } |
| 1238 | } |
| 1239 | |
| 1240 | static void |
| 1241 | flush_uart() |
| 1242 | { |
| 1243 | while (wnuma && f1open) |
| 1244 | wnuma -= fwrite(wbufa, 1, wnuma, f1out); |
| 1245 | while (wnumb && f2open) |
| 1246 | wnumb -= fwrite(wbufb, 1, wnumb, f2out); |
| 1247 | } |
| 1248 | |
| 1249 | |
| 1250 | |
| 1251 | static void |
| 1252 | uarta_tx() |
| 1253 | { |
| 1254 | |
| 1255 | while (f1open && fwrite(&uarta_sreg, 1, 1, f1out) != 1); |
| 1256 | if (uart_stat_reg & UARTA_HRE) { |
| 1257 | uart_stat_reg |= UARTA_SRE; |
| 1258 | } else { |
| 1259 | uarta_sreg = uarta_hreg; |
| 1260 | uart_stat_reg |= UARTA_HRE; |
| 1261 | event(uarta_tx, 0, UART_TX_TIME); |
| 1262 | } |
| 1263 | mec_irq(4); |
| 1264 | } |
| 1265 | |
| 1266 | static void |
| 1267 | uartb_tx() |
| 1268 | { |
| 1269 | while (f2open && fwrite(&uartb_sreg, 1, 1, f2out) != 1); |
| 1270 | if (uart_stat_reg & UARTB_HRE) { |
| 1271 | uart_stat_reg |= UARTB_SRE; |
| 1272 | } else { |
| 1273 | uartb_sreg = uartb_hreg; |
| 1274 | uart_stat_reg |= UARTB_HRE; |
| 1275 | event(uartb_tx, 0, UART_TX_TIME); |
| 1276 | } |
| 1277 | mec_irq(5); |
| 1278 | } |
| 1279 | |
| 1280 | static void |
| 1281 | uart_rx(arg) |
| 1282 | caddr_t arg; |
| 1283 | { |
| 1284 | int32 rsize; |
| 1285 | char rxd; |
| 1286 | |
| 1287 | |
| 1288 | rsize = 0; |
| 1289 | if (f1open) |
| 1290 | rsize = DO_STDIO_READ(ifd1, &rxd, 1); |
| 1291 | if (rsize > 0) { |
| 1292 | uarta_data = UART_DR | rxd; |
| 1293 | if (uart_stat_reg & UARTA_HRE) |
| 1294 | uarta_data |= UART_THE; |
| 1295 | if (uart_stat_reg & UARTA_SRE) |
| 1296 | uarta_data |= UART_TSE; |
| 1297 | if (uart_stat_reg & UARTA_DR) { |
| 1298 | uart_stat_reg |= UARTA_OR; |
| 1299 | mec_irq(7); /* UART error interrupt */ |
| 1300 | } |
| 1301 | uart_stat_reg |= UARTA_DR; |
| 1302 | mec_irq(4); |
| 1303 | } |
| 1304 | rsize = 0; |
| 1305 | if (f2open) |
| 1306 | rsize = DO_STDIO_READ(ifd2, &rxd, 1); |
| 1307 | if (rsize) { |
| 1308 | uartb_data = UART_DR | rxd; |
| 1309 | if (uart_stat_reg & UARTB_HRE) |
| 1310 | uartb_data |= UART_THE; |
| 1311 | if (uart_stat_reg & UARTB_SRE) |
| 1312 | uartb_data |= UART_TSE; |
| 1313 | if (uart_stat_reg & UARTB_DR) { |
| 1314 | uart_stat_reg |= UARTB_OR; |
| 1315 | mec_irq(7); /* UART error interrupt */ |
| 1316 | } |
| 1317 | uart_stat_reg |= UARTB_DR; |
| 1318 | mec_irq(5); |
| 1319 | } |
| 1320 | event(uart_rx, 0, UART_RX_TIME); |
| 1321 | } |
| 1322 | |
| 1323 | static void |
| 1324 | uart_intr(arg) |
| 1325 | caddr_t arg; |
| 1326 | { |
| 1327 | read_uart(0xE8); /* Check for UART interrupts every 1000 clk */ |
| 1328 | flush_uart(); /* Flush UART ports */ |
| 1329 | event(uart_intr, 0, UART_FLUSH_TIME); |
| 1330 | } |
| 1331 | |
| 1332 | |
| 1333 | static void |
| 1334 | uart_irq_start() |
| 1335 | { |
| 1336 | #ifdef FAST_UART |
| 1337 | event(uart_intr, 0, UART_FLUSH_TIME); |
| 1338 | #else |
| 1339 | #ifndef _WIN32 |
| 1340 | event(uart_rx, 0, UART_RX_TIME); |
| 1341 | #endif |
| 1342 | #endif |
| 1343 | } |
| 1344 | |
| 1345 | /* Watch-dog */ |
| 1346 | |
| 1347 | static void |
| 1348 | wdog_intr(arg) |
| 1349 | caddr_t arg; |
| 1350 | { |
| 1351 | if (wdog_status == disabled) { |
| 1352 | wdog_status = stopped; |
| 1353 | } else { |
| 1354 | |
| 1355 | if (wdog_counter) { |
| 1356 | wdog_counter--; |
| 1357 | event(wdog_intr, 0, wdog_scaler + 1); |
| 1358 | } else { |
| 1359 | if (wdog_rston) { |
| 1360 | printf("Watchdog reset!\n"); |
| 1361 | sys_reset(); |
| 1362 | mec_ersr = 0xC000; |
| 1363 | } else { |
| 1364 | mec_irq(15); |
| 1365 | wdog_rston = 1; |
| 1366 | wdog_counter = wdog_rst_delay; |
| 1367 | event(wdog_intr, 0, wdog_scaler + 1); |
| 1368 | } |
| 1369 | } |
| 1370 | } |
| 1371 | } |
| 1372 | |
| 1373 | static void |
| 1374 | wdog_start() |
| 1375 | { |
| 1376 | event(wdog_intr, 0, wdog_scaler + 1); |
| 1377 | if (sis_verbose) |
| 1378 | printf("Watchdog started, scaler = %d, counter = %d\n", |
| 1379 | wdog_scaler, wdog_counter); |
| 1380 | } |
| 1381 | |
| 1382 | |
| 1383 | /* MEC timers */ |
| 1384 | |
| 1385 | |
| 1386 | static void |
| 1387 | rtc_intr(arg) |
| 1388 | caddr_t arg; |
| 1389 | { |
| 1390 | if (rtc_counter == 0) { |
| 1391 | |
| 1392 | mec_irq(13); |
| 1393 | if (rtc_cr) |
| 1394 | rtc_counter = rtc_reload; |
| 1395 | else |
| 1396 | rtc_se = 0; |
| 1397 | } else |
| 1398 | rtc_counter -= 1; |
| 1399 | if (rtc_se) { |
| 1400 | event(rtc_intr, 0, rtc_scaler + 1); |
| 1401 | rtc_scaler_start = now(); |
| 1402 | rtc_enabled = 1; |
| 1403 | } else { |
| 1404 | if (sis_verbose) |
| 1405 | printf("RTC stopped\n\r"); |
| 1406 | rtc_enabled = 0; |
| 1407 | } |
| 1408 | } |
| 1409 | |
| 1410 | static void |
| 1411 | rtc_start() |
| 1412 | { |
| 1413 | if (sis_verbose) |
| 1414 | printf("RTC started (period %d)\n\r", rtc_scaler + 1); |
| 1415 | event(rtc_intr, 0, rtc_scaler + 1); |
| 1416 | rtc_scaler_start = now(); |
| 1417 | rtc_enabled = 1; |
| 1418 | } |
| 1419 | |
| 1420 | static uint32 |
| 1421 | rtc_counter_read() |
| 1422 | { |
| 1423 | return (rtc_counter); |
| 1424 | } |
| 1425 | |
| 1426 | static void |
| 1427 | rtc_scaler_set(val) |
| 1428 | uint32 val; |
| 1429 | { |
| 1430 | rtc_scaler = val & 0x0ff; /* eight-bit scaler only */ |
| 1431 | } |
| 1432 | |
| 1433 | static void |
| 1434 | rtc_reload_set(val) |
| 1435 | uint32 val; |
| 1436 | { |
| 1437 | rtc_reload = val; |
| 1438 | } |
| 1439 | |
| 1440 | static void |
| 1441 | gpt_intr(arg) |
| 1442 | caddr_t arg; |
| 1443 | { |
| 1444 | if (gpt_counter == 0) { |
| 1445 | mec_irq(12); |
| 1446 | if (gpt_cr) |
| 1447 | gpt_counter = gpt_reload; |
| 1448 | else |
| 1449 | gpt_se = 0; |
| 1450 | } else |
| 1451 | gpt_counter -= 1; |
| 1452 | if (gpt_se) { |
| 1453 | event(gpt_intr, 0, gpt_scaler + 1); |
| 1454 | gpt_scaler_start = now(); |
| 1455 | gpt_enabled = 1; |
| 1456 | } else { |
| 1457 | if (sis_verbose) |
| 1458 | printf("GPT stopped\n\r"); |
| 1459 | gpt_enabled = 0; |
| 1460 | } |
| 1461 | } |
| 1462 | |
| 1463 | static void |
| 1464 | gpt_start() |
| 1465 | { |
| 1466 | if (sis_verbose) |
| 1467 | printf("GPT started (period %d)\n\r", gpt_scaler + 1); |
| 1468 | event(gpt_intr, 0, gpt_scaler + 1); |
| 1469 | gpt_scaler_start = now(); |
| 1470 | gpt_enabled = 1; |
| 1471 | } |
| 1472 | |
| 1473 | static uint32 |
| 1474 | gpt_counter_read() |
| 1475 | { |
| 1476 | return (gpt_counter); |
| 1477 | } |
| 1478 | |
| 1479 | static void |
| 1480 | gpt_scaler_set(val) |
| 1481 | uint32 val; |
| 1482 | { |
| 1483 | gpt_scaler = val & 0x0ffff; /* 16-bit scaler */ |
| 1484 | } |
| 1485 | |
| 1486 | static void |
| 1487 | gpt_reload_set(val) |
| 1488 | uint32 val; |
| 1489 | { |
| 1490 | gpt_reload = val; |
| 1491 | } |
| 1492 | |
| 1493 | static void |
| 1494 | timer_ctrl(val) |
| 1495 | uint32 val; |
| 1496 | { |
| 1497 | |
| 1498 | rtc_cr = ((val & TCR_TCRCR) != 0); |
| 1499 | if (val & TCR_TCRCL) { |
| 1500 | rtc_counter = rtc_reload; |
| 1501 | } |
| 1502 | if (val & TCR_TCRSL) { |
| 1503 | } |
| 1504 | rtc_se = ((val & TCR_TCRSE) != 0); |
| 1505 | if (rtc_se && (rtc_enabled == 0)) |
| 1506 | rtc_start(); |
| 1507 | |
| 1508 | gpt_cr = (val & TCR_GACR); |
| 1509 | if (val & TCR_GACL) { |
| 1510 | gpt_counter = gpt_reload; |
| 1511 | } |
| 1512 | if (val & TCR_GACL) { |
| 1513 | } |
| 1514 | gpt_se = (val & TCR_GASE) >> 2; |
| 1515 | if (gpt_se && (gpt_enabled == 0)) |
| 1516 | gpt_start(); |
| 1517 | } |
| 1518 | |
| 1519 | |
| 1520 | /* Retrieve data from target memory. MEM points to location from which |
| 1521 | to read the data; DATA points to words where retrieved data will be |
| 1522 | stored in host byte order. SZ contains log(2) of the number of bytes |
| 1523 | to retrieve, and can be 0 (1 byte), 1 (one half-word), 2 (one word), |
| 1524 | or 3 (two words). */ |
| 1525 | |
| 1526 | static void |
| 1527 | fetch_bytes (asi, mem, data, sz) |
| 1528 | int asi; |
| 1529 | unsigned char *mem; |
| 1530 | uint32 *data; |
| 1531 | int sz; |
| 1532 | { |
| 1533 | if (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN |
| 1534 | || asi == 8 || asi == 9) { |
| 1535 | switch (sz) { |
| 1536 | case 3: |
| 1537 | data[1] = (((uint32) mem[7]) & 0xff) | |
| 1538 | ((((uint32) mem[6]) & 0xff) << 8) | |
| 1539 | ((((uint32) mem[5]) & 0xff) << 16) | |
| 1540 | ((((uint32) mem[4]) & 0xff) << 24); |
| 1541 | /* Fall through to 2 */ |
| 1542 | case 2: |
| 1543 | data[0] = (((uint32) mem[3]) & 0xff) | |
| 1544 | ((((uint32) mem[2]) & 0xff) << 8) | |
| 1545 | ((((uint32) mem[1]) & 0xff) << 16) | |
| 1546 | ((((uint32) mem[0]) & 0xff) << 24); |
| 1547 | break; |
| 1548 | case 1: |
| 1549 | data[0] = (((uint32) mem[1]) & 0xff) | |
| 1550 | ((((uint32) mem[0]) & 0xff) << 8); |
| 1551 | break; |
| 1552 | case 0: |
| 1553 | data[0] = mem[0] & 0xff; |
| 1554 | break; |
| 1555 | |
| 1556 | } |
| 1557 | } else { |
| 1558 | switch (sz) { |
| 1559 | case 3: |
| 1560 | data[1] = ((((uint32) mem[7]) & 0xff) << 24) | |
| 1561 | ((((uint32) mem[6]) & 0xff) << 16) | |
| 1562 | ((((uint32) mem[5]) & 0xff) << 8) | |
| 1563 | (((uint32) mem[4]) & 0xff); |
| 1564 | /* Fall through to 4 */ |
| 1565 | case 2: |
| 1566 | data[0] = ((((uint32) mem[3]) & 0xff) << 24) | |
| 1567 | ((((uint32) mem[2]) & 0xff) << 16) | |
| 1568 | ((((uint32) mem[1]) & 0xff) << 8) | |
| 1569 | (((uint32) mem[0]) & 0xff); |
| 1570 | break; |
| 1571 | case 1: |
| 1572 | data[0] = ((((uint32) mem[1]) & 0xff) << 8) | |
| 1573 | (((uint32) mem[0]) & 0xff); |
| 1574 | break; |
| 1575 | case 0: |
| 1576 | data[0] = mem[0] & 0xff; |
| 1577 | break; |
| 1578 | } |
| 1579 | } |
| 1580 | } |
| 1581 | |
| 1582 | |
| 1583 | /* Store data in target byte order. MEM points to location to store data; |
| 1584 | DATA points to words in host byte order to be stored. SZ contains log(2) |
| 1585 | of the number of bytes to retrieve, and can be 0 (1 byte), 1 (one half-word), |
| 1586 | 2 (one word), or 3 (two words). */ |
| 1587 | |
| 1588 | static void |
| 1589 | store_bytes (mem, data, sz) |
| 1590 | unsigned char *mem; |
| 1591 | uint32 *data; |
| 1592 | int sz; |
| 1593 | { |
| 1594 | if (CURRENT_TARGET_BYTE_ORDER == LITTLE_ENDIAN) { |
| 1595 | switch (sz) { |
| 1596 | case 3: |
| 1597 | mem[7] = (data[1] >> 24) & 0xff; |
| 1598 | mem[6] = (data[1] >> 16) & 0xff; |
| 1599 | mem[5] = (data[1] >> 8) & 0xff; |
| 1600 | mem[4] = data[1] & 0xff; |
| 1601 | /* Fall through to 2 */ |
| 1602 | case 2: |
| 1603 | mem[3] = (data[0] >> 24) & 0xff; |
| 1604 | mem[2] = (data[0] >> 16) & 0xff; |
| 1605 | /* Fall through to 1 */ |
| 1606 | case 1: |
| 1607 | mem[1] = (data[0] >> 8) & 0xff; |
| 1608 | /* Fall through to 0 */ |
| 1609 | case 0: |
| 1610 | mem[0] = data[0] & 0xff; |
| 1611 | break; |
| 1612 | } |
| 1613 | } else { |
| 1614 | switch (sz) { |
| 1615 | case 3: |
| 1616 | mem[7] = data[1] & 0xff; |
| 1617 | mem[6] = (data[1] >> 8) & 0xff; |
| 1618 | mem[5] = (data[1] >> 16) & 0xff; |
| 1619 | mem[4] = (data[1] >> 24) & 0xff; |
| 1620 | /* Fall through to 2 */ |
| 1621 | case 2: |
| 1622 | mem[3] = data[0] & 0xff; |
| 1623 | mem[2] = (data[0] >> 8) & 0xff; |
| 1624 | mem[1] = (data[0] >> 16) & 0xff; |
| 1625 | mem[0] = (data[0] >> 24) & 0xff; |
| 1626 | break; |
| 1627 | case 1: |
| 1628 | mem[1] = data[0] & 0xff; |
| 1629 | mem[0] = (data[0] >> 8) & 0xff; |
| 1630 | break; |
| 1631 | case 0: |
| 1632 | mem[0] = data[0] & 0xff; |
| 1633 | break; |
| 1634 | |
| 1635 | } |
| 1636 | } |
| 1637 | } |
| 1638 | |
| 1639 | |
| 1640 | /* Memory emulation */ |
| 1641 | |
| 1642 | int |
| 1643 | memory_read(asi, addr, data, sz, ws) |
| 1644 | int32 asi; |
| 1645 | uint32 addr; |
| 1646 | uint32 *data; |
| 1647 | int32 sz; |
| 1648 | int32 *ws; |
| 1649 | { |
| 1650 | int32 mexc; |
| 1651 | |
| 1652 | #ifdef ERRINJ |
| 1653 | if (errmec) { |
| 1654 | if (sis_verbose) |
| 1655 | printf("Inserted MEC error %d\n",errmec); |
| 1656 | set_sfsr(errmec, addr, asi, 1); |
| 1657 | if (errmec == 5) mecparerror(); |
| 1658 | if (errmec == 6) iucomperr(); |
| 1659 | errmec = 0; |
| 1660 | return(1); |
| 1661 | } |
| 1662 | #endif; |
| 1663 | |
| 1664 | if ((addr >= mem_ramstart) && (addr < (mem_ramstart + mem_ramsz))) { |
| 1665 | fetch_bytes (asi, &ramb[addr & mem_rammask], data, sz); |
| 1666 | *ws = mem_ramr_ws; |
| 1667 | return (0); |
| 1668 | } else if ((addr >= MEC_START) && (addr < MEC_END)) { |
| 1669 | mexc = mec_read(addr, asi, data); |
| 1670 | if (mexc) { |
| 1671 | set_sfsr(MEC_ACC, addr, asi, 1); |
| 1672 | *ws = MEM_EX_WS; |
| 1673 | } else { |
| 1674 | *ws = 0; |
| 1675 | } |
| 1676 | return (mexc); |
| 1677 | |
| 1678 | #ifdef ERA |
| 1679 | |
| 1680 | } else if (era) { |
| 1681 | if ((addr < 0x100000) || |
| 1682 | ((addr>= 0x80000000) && (addr < 0x80100000))) { |
| 1683 | fetch_bytes (asi, &romb[addr & ROM_MASK], data, sz); |
| 1684 | *ws = 4; |
| 1685 | return (0); |
| 1686 | } else if ((addr >= 0x10000000) && |
| 1687 | (addr < (0x10000000 + (512 << (mec_iocr & 0x0f)))) && |
| 1688 | (mec_iocr & 0x10)) { |
| 1689 | *data = erareg; |
| 1690 | return (0); |
| 1691 | } |
| 1692 | |
| 1693 | } else if (addr < mem_romsz) { |
| 1694 | fetch_bytes (asi, &romb[addr], data, sz); |
| 1695 | *ws = mem_romr_ws; |
| 1696 | return (0); |
| 1697 | |
| 1698 | #else |
| 1699 | } else if (addr < mem_romsz) { |
| 1700 | fetch_bytes (asi, &romb[addr], data, sz); |
| 1701 | *ws = mem_romr_ws; |
| 1702 | return (0); |
| 1703 | #endif |
| 1704 | |
| 1705 | } |
| 1706 | |
| 1707 | printf("Memory exception at %x (illegal address)\n", addr); |
| 1708 | set_sfsr(UIMP_ACC, addr, asi, 1); |
| 1709 | *ws = MEM_EX_WS; |
| 1710 | return (1); |
| 1711 | } |
| 1712 | |
| 1713 | int |
| 1714 | memory_write(asi, addr, data, sz, ws) |
| 1715 | int32 asi; |
| 1716 | uint32 addr; |
| 1717 | uint32 *data; |
| 1718 | int32 sz; |
| 1719 | int32 *ws; |
| 1720 | { |
| 1721 | uint32 byte_addr; |
| 1722 | uint32 byte_mask; |
| 1723 | uint32 waddr; |
| 1724 | uint32 *ram; |
| 1725 | int32 mexc; |
| 1726 | int i; |
| 1727 | int wphit[2]; |
| 1728 | |
| 1729 | #ifdef ERRINJ |
| 1730 | if (errmec) { |
| 1731 | if (sis_verbose) |
| 1732 | printf("Inserted MEC error %d\n",errmec); |
| 1733 | set_sfsr(errmec, addr, asi, 0); |
| 1734 | if (errmec == 5) mecparerror(); |
| 1735 | if (errmec == 6) iucomperr(); |
| 1736 | errmec = 0; |
| 1737 | return(1); |
| 1738 | } |
| 1739 | #endif; |
| 1740 | |
| 1741 | if ((addr >= mem_ramstart) && (addr < (mem_ramstart + mem_ramsz))) { |
| 1742 | if (mem_accprot) { |
| 1743 | |
| 1744 | waddr = (addr & 0x7fffff) >> 2; |
| 1745 | for (i = 0; i < 2; i++) |
| 1746 | wphit[i] = |
| 1747 | (((asi == 0xa) && (mec_wpr[i] & 1)) || |
| 1748 | ((asi == 0xb) && (mec_wpr[i] & 2))) && |
| 1749 | ((waddr >= mec_ssa[i]) && ((waddr | (sz == 3)) < mec_sea[i])); |
| 1750 | |
| 1751 | if (((mem_blockprot) && (wphit[0] || wphit[1])) || |
| 1752 | ((!mem_blockprot) && |
| 1753 | !((mec_wpr[0] && wphit[0]) || (mec_wpr[1] && wphit[1])) |
| 1754 | )) { |
| 1755 | if (sis_verbose) |
| 1756 | printf("Memory access protection error at 0x%08x\n", addr); |
| 1757 | set_sfsr(PROT_EXC, addr, asi, 0); |
| 1758 | *ws = MEM_EX_WS; |
| 1759 | return (1); |
| 1760 | } |
| 1761 | } |
| 1762 | |
| 1763 | store_bytes (&ramb[addr & mem_rammask], data, sz); |
| 1764 | |
| 1765 | switch (sz) { |
| 1766 | case 0: |
| 1767 | case 1: |
| 1768 | *ws = mem_ramw_ws + 3; |
| 1769 | break; |
| 1770 | case 2: |
| 1771 | *ws = mem_ramw_ws; |
| 1772 | break; |
| 1773 | case 3: |
| 1774 | *ws = 2 * mem_ramw_ws + STD_WS; |
| 1775 | break; |
| 1776 | } |
| 1777 | return (0); |
| 1778 | } else if ((addr >= MEC_START) && (addr < MEC_END)) { |
| 1779 | if ((sz != 2) || (asi != 0xb)) { |
| 1780 | set_sfsr(MEC_ACC, addr, asi, 0); |
| 1781 | *ws = MEM_EX_WS; |
| 1782 | return (1); |
| 1783 | } |
| 1784 | mexc = mec_write(addr, *data); |
| 1785 | if (mexc) { |
| 1786 | set_sfsr(MEC_ACC, addr, asi, 0); |
| 1787 | *ws = MEM_EX_WS; |
| 1788 | } else { |
| 1789 | *ws = 0; |
| 1790 | } |
| 1791 | return (mexc); |
| 1792 | |
| 1793 | #ifdef ERA |
| 1794 | |
| 1795 | } else if (era) { |
| 1796 | if ((erareg & 2) && |
| 1797 | ((addr < 0x100000) || ((addr >= 0x80000000) && (addr < 0x80100000)))) { |
| 1798 | addr &= ROM_MASK; |
| 1799 | *ws = sz == 3 ? 8 : 4; |
| 1800 | store_bytes (&romb[addr], data, sz); |
| 1801 | return (0); |
| 1802 | } else if ((addr >= 0x10000000) && |
| 1803 | (addr < (0x10000000 + (512 << (mec_iocr & 0x0f)))) && |
| 1804 | (mec_iocr & 0x10)) { |
| 1805 | erareg = *data & 0x0e; |
| 1806 | return (0); |
| 1807 | } |
| 1808 | |
| 1809 | } else if ((addr < mem_romsz) && (mec_memcfg & 0x10000) && (wrp) && |
| 1810 | (((mec_memcfg & 0x20000) && (sz > 1)) || |
| 1811 | (!(mec_memcfg & 0x20000) && (sz == 0)))) { |
| 1812 | |
| 1813 | *ws = mem_romw_ws + 1; |
| 1814 | if (sz == 3) |
| 1815 | *ws += mem_romw_ws + STD_WS; |
| 1816 | store_bytes (&romb[addr], data, sz); |
| 1817 | return (0); |
| 1818 | |
| 1819 | #else |
| 1820 | } else if ((addr < mem_romsz) && (mec_memcfg & 0x10000) && (wrp) && |
| 1821 | (((mec_memcfg & 0x20000) && (sz > 1)) || |
| 1822 | (!(mec_memcfg & 0x20000) && (sz == 0)))) { |
| 1823 | |
| 1824 | *ws = mem_romw_ws + 1; |
| 1825 | if (sz == 3) |
| 1826 | *ws += mem_romw_ws + STD_WS; |
| 1827 | store_bytes (&romb[addr], data, sz); |
| 1828 | return (0); |
| 1829 | |
| 1830 | #endif |
| 1831 | |
| 1832 | } |
| 1833 | |
| 1834 | *ws = MEM_EX_WS; |
| 1835 | set_sfsr(UIMP_ACC, addr, asi, 0); |
| 1836 | return (1); |
| 1837 | } |
| 1838 | |
| 1839 | static unsigned char * |
| 1840 | get_mem_ptr(addr, size) |
| 1841 | uint32 addr; |
| 1842 | uint32 size; |
| 1843 | { |
| 1844 | if ((addr + size) < ROM_SZ) { |
| 1845 | return (&romb[addr]); |
| 1846 | } else if ((addr >= mem_ramstart) && ((addr + size) < mem_ramend)) { |
| 1847 | return (&ramb[addr & mem_rammask]); |
| 1848 | } |
| 1849 | |
| 1850 | #ifdef ERA |
| 1851 | else if ((era) && ((addr <0x100000) || |
| 1852 | ((addr >= (unsigned) 0x80000000) && ((addr + size) < (unsigned) 0x80100000)))) { |
| 1853 | return (&romb[addr & ROM_MASK]); |
| 1854 | } |
| 1855 | #endif |
| 1856 | |
| 1857 | return ((char *) -1); |
| 1858 | } |
| 1859 | |
| 1860 | int |
| 1861 | sis_memory_write(addr, data, length) |
| 1862 | uint32 addr; |
| 1863 | char *data; |
| 1864 | uint32 length; |
| 1865 | { |
| 1866 | char *mem; |
| 1867 | |
| 1868 | if ((mem = get_mem_ptr(addr, length)) == ((char *) -1)) |
| 1869 | return (0); |
| 1870 | |
| 1871 | memcpy(mem, data, length); |
| 1872 | return (length); |
| 1873 | } |
| 1874 | |
| 1875 | int |
| 1876 | sis_memory_read(addr, data, length) |
| 1877 | uint32 addr; |
| 1878 | char *data; |
| 1879 | uint32 length; |
| 1880 | { |
| 1881 | char *mem; |
| 1882 | |
| 1883 | if ((mem = get_mem_ptr(addr, length)) == ((char *) -1)) |
| 1884 | return (0); |
| 1885 | |
| 1886 | memcpy(data, mem, length); |
| 1887 | return (length); |
| 1888 | } |