| 1 | /*> interp.c <*/ |
| 2 | /* Simulator for the MIPS architecture. |
| 3 | |
| 4 | This file is part of the MIPS sim |
| 5 | |
| 6 | THIS SOFTWARE IS NOT COPYRIGHTED |
| 7 | |
| 8 | Cygnus offers the following for use in the public domain. Cygnus |
| 9 | makes no warranty with regard to the software or it's performance |
| 10 | and the user accepts the software "AS IS" with all faults. |
| 11 | |
| 12 | CYGNUS DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD TO |
| 13 | THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| 14 | MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. |
| 15 | |
| 16 | $Revision$ |
| 17 | $Date$ |
| 18 | |
| 19 | NOTEs: |
| 20 | |
| 21 | The IDT monitor (found on the VR4300 board), seems to lie about |
| 22 | register contents. It seems to treat the registers as sign-extended |
| 23 | 32-bit values. This cause *REAL* problems when single-stepping 64-bit |
| 24 | code on the hardware. |
| 25 | |
| 26 | */ |
| 27 | |
| 28 | /* The TRACE manifests enable the provision of extra features. If they |
| 29 | are not defined then a simpler (quicker) simulator is constructed |
| 30 | without the required run-time checks, etc. */ |
| 31 | #if 1 /* 0 to allow user build selection, 1 to force inclusion */ |
| 32 | #define TRACE (1) |
| 33 | #endif |
| 34 | |
| 35 | #include "bfd.h" |
| 36 | #include "sim-main.h" |
| 37 | #include "sim-utils.h" |
| 38 | #include "sim-options.h" |
| 39 | #include "sim-assert.h" |
| 40 | |
| 41 | /* start-sanitize-sky */ |
| 42 | #ifdef TARGET_SKY |
| 43 | #include "sky-vu.h" |
| 44 | #include "sky-vpe.h" |
| 45 | #include "sky-libvpe.h" |
| 46 | #include "sky-pke.h" |
| 47 | #include "idecode.h" |
| 48 | #endif |
| 49 | /* end-sanitize-sky */ |
| 50 | |
| 51 | #include "config.h" |
| 52 | |
| 53 | #include <stdio.h> |
| 54 | #include <stdarg.h> |
| 55 | #include <ansidecl.h> |
| 56 | #include <ctype.h> |
| 57 | #include <limits.h> |
| 58 | #include <math.h> |
| 59 | #ifdef HAVE_STDLIB_H |
| 60 | #include <stdlib.h> |
| 61 | #endif |
| 62 | #ifdef HAVE_STRING_H |
| 63 | #include <string.h> |
| 64 | #else |
| 65 | #ifdef HAVE_STRINGS_H |
| 66 | #include <strings.h> |
| 67 | #endif |
| 68 | #endif |
| 69 | |
| 70 | #include "getopt.h" |
| 71 | #include "libiberty.h" |
| 72 | #include "bfd.h" |
| 73 | #include "callback.h" /* GDB simulator callback interface */ |
| 74 | #include "remote-sim.h" /* GDB simulator interface */ |
| 75 | |
| 76 | #include "sysdep.h" |
| 77 | |
| 78 | #ifndef PARAMS |
| 79 | #define PARAMS(x) |
| 80 | #endif |
| 81 | |
| 82 | char* pr_addr PARAMS ((SIM_ADDR addr)); |
| 83 | char* pr_uword64 PARAMS ((uword64 addr)); |
| 84 | |
| 85 | |
| 86 | /* Get the simulator engine description, without including the code: */ |
| 87 | #if !(WITH_IGEN) |
| 88 | #define SIM_MANIFESTS |
| 89 | #include "oengine.c" |
| 90 | #undef SIM_MANIFESTS |
| 91 | #endif |
| 92 | |
| 93 | /* Within interp.c we refer to the sim_state and sim_cpu directly. */ |
| 94 | #define SD sd |
| 95 | #define CPU cpu |
| 96 | |
| 97 | |
| 98 | /* The following reserved instruction value is used when a simulator |
| 99 | trap is required. NOTE: Care must be taken, since this value may be |
| 100 | used in later revisions of the MIPS ISA. */ |
| 101 | #define RSVD_INSTRUCTION (0x00000005) |
| 102 | #define RSVD_INSTRUCTION_MASK (0xFC00003F) |
| 103 | |
| 104 | #define RSVD_INSTRUCTION_ARG_SHIFT 6 |
| 105 | #define RSVD_INSTRUCTION_ARG_MASK 0xFFFFF |
| 106 | |
| 107 | |
| 108 | /* Bits in the Debug register */ |
| 109 | #define Debug_DBD 0x80000000 /* Debug Branch Delay */ |
| 110 | #define Debug_DM 0x40000000 /* Debug Mode */ |
| 111 | #define Debug_DBp 0x00000002 /* Debug Breakpoint indicator */ |
| 112 | |
| 113 | |
| 114 | |
| 115 | |
| 116 | |
| 117 | /*---------------------------------------------------------------------------*/ |
| 118 | /*-- GDB simulator interface ------------------------------------------------*/ |
| 119 | /*---------------------------------------------------------------------------*/ |
| 120 | |
| 121 | static void ColdReset PARAMS((SIM_DESC sd)); |
| 122 | |
| 123 | /*---------------------------------------------------------------------------*/ |
| 124 | |
| 125 | |
| 126 | |
| 127 | #define DELAYSLOT() {\ |
| 128 | if (STATE & simDELAYSLOT)\ |
| 129 | sim_io_eprintf(sd,"Delay slot already activated (branch in delay slot?)\n");\ |
| 130 | STATE |= simDELAYSLOT;\ |
| 131 | } |
| 132 | |
| 133 | #define JALDELAYSLOT() {\ |
| 134 | DELAYSLOT ();\ |
| 135 | STATE |= simJALDELAYSLOT;\ |
| 136 | } |
| 137 | |
| 138 | #define NULLIFY() {\ |
| 139 | STATE &= ~simDELAYSLOT;\ |
| 140 | STATE |= simSKIPNEXT;\ |
| 141 | } |
| 142 | |
| 143 | #define CANCELDELAYSLOT() {\ |
| 144 | DSSTATE = 0;\ |
| 145 | STATE &= ~(simDELAYSLOT | simJALDELAYSLOT);\ |
| 146 | } |
| 147 | |
| 148 | #define INDELAYSLOT() ((STATE & simDELAYSLOT) != 0) |
| 149 | #define INJALDELAYSLOT() ((STATE & simJALDELAYSLOT) != 0) |
| 150 | |
| 151 | #define K0BASE (0x80000000) |
| 152 | #define K0SIZE (0x20000000) |
| 153 | #define K1BASE (0xA0000000) |
| 154 | #define K1SIZE (0x20000000) |
| 155 | #define MONITOR_BASE (0xBFC00000) |
| 156 | #define MONITOR_SIZE (1 << 11) |
| 157 | #define MEM_SIZE (2 << 20) |
| 158 | |
| 159 | /* start-sanitize-sky */ |
| 160 | #ifdef TARGET_SKY |
| 161 | #undef MEM_SIZE |
| 162 | #define MEM_SIZE (16 << 20) /* 16 MB */ |
| 163 | #endif |
| 164 | /* end-sanitize-sky */ |
| 165 | |
| 166 | #if defined(TRACE) |
| 167 | static char *tracefile = "trace.din"; /* default filename for trace log */ |
| 168 | FILE *tracefh = NULL; |
| 169 | static void open_trace PARAMS((SIM_DESC sd)); |
| 170 | #endif /* TRACE */ |
| 171 | |
| 172 | static DECLARE_OPTION_HANDLER (mips_option_handler); |
| 173 | |
| 174 | enum { |
| 175 | OPTION_DINERO_TRACE = OPTION_START, |
| 176 | OPTION_DINERO_FILE |
| 177 | /* start-sanitize-sky */ |
| 178 | ,OPTION_FLOAT_TYPE |
| 179 | /* end-sanitize-sky */ |
| 180 | }; |
| 181 | |
| 182 | static SIM_RC |
| 183 | mips_option_handler (sd, cpu, opt, arg, is_command) |
| 184 | SIM_DESC sd; |
| 185 | sim_cpu *cpu; |
| 186 | int opt; |
| 187 | char *arg; |
| 188 | int is_command; |
| 189 | { |
| 190 | int cpu_nr; |
| 191 | switch (opt) |
| 192 | { |
| 193 | case OPTION_DINERO_TRACE: /* ??? */ |
| 194 | #if defined(TRACE) |
| 195 | /* Eventually the simTRACE flag could be treated as a toggle, to |
| 196 | allow external control of the program points being traced |
| 197 | (i.e. only from main onwards, excluding the run-time setup, |
| 198 | etc.). */ |
| 199 | for (cpu_nr = 0; cpu_nr < MAX_NR_PROCESSORS; cpu_nr++) |
| 200 | { |
| 201 | sim_cpu *cpu = STATE_CPU (sd, cpu_nr); |
| 202 | if (arg == NULL) |
| 203 | STATE |= simTRACE; |
| 204 | else if (strcmp (arg, "yes") == 0) |
| 205 | STATE |= simTRACE; |
| 206 | else if (strcmp (arg, "no") == 0) |
| 207 | STATE &= ~simTRACE; |
| 208 | else if (strcmp (arg, "on") == 0) |
| 209 | STATE |= simTRACE; |
| 210 | else if (strcmp (arg, "off") == 0) |
| 211 | STATE &= ~simTRACE; |
| 212 | else |
| 213 | { |
| 214 | fprintf (stderr, "Unrecognized dinero-trace option `%s'\n", arg); |
| 215 | return SIM_RC_FAIL; |
| 216 | } |
| 217 | } |
| 218 | return SIM_RC_OK; |
| 219 | #else /* !TRACE */ |
| 220 | fprintf(stderr,"\ |
| 221 | Simulator constructed without dinero tracing support (for performance).\n\ |
| 222 | Re-compile simulator with \"-DTRACE\" to enable this option.\n"); |
| 223 | return SIM_RC_FAIL; |
| 224 | #endif /* !TRACE */ |
| 225 | |
| 226 | case OPTION_DINERO_FILE: |
| 227 | #if defined(TRACE) |
| 228 | if (optarg != NULL) { |
| 229 | char *tmp; |
| 230 | tmp = (char *)malloc(strlen(optarg) + 1); |
| 231 | if (tmp == NULL) |
| 232 | { |
| 233 | sim_io_printf(sd,"Failed to allocate buffer for tracefile name \"%s\"\n",optarg); |
| 234 | return SIM_RC_FAIL; |
| 235 | } |
| 236 | else { |
| 237 | strcpy(tmp,optarg); |
| 238 | tracefile = tmp; |
| 239 | sim_io_printf(sd,"Placing trace information into file \"%s\"\n",tracefile); |
| 240 | } |
| 241 | } |
| 242 | #endif /* TRACE */ |
| 243 | return SIM_RC_OK; |
| 244 | |
| 245 | /* start-sanitize-sky */ |
| 246 | case OPTION_FLOAT_TYPE: |
| 247 | /* Use host (fast) or target (accurate) floating point implementation. */ |
| 248 | if (arg && strcmp (arg, "host") == 0) |
| 249 | STATE_FP_TYPE_OPT (sd) &= ~STATE_FP_TYPE_OPT_TARGET; |
| 250 | else if (arg && strcmp (arg, "target") == 0) |
| 251 | STATE_FP_TYPE_OPT (sd) |= STATE_FP_TYPE_OPT_TARGET; |
| 252 | else |
| 253 | { |
| 254 | fprintf (stderr, "Unrecognized float-type option `%s'\n", arg); |
| 255 | return SIM_RC_FAIL; |
| 256 | } |
| 257 | return SIM_RC_OK; |
| 258 | /* end-sanitize-sky */ |
| 259 | } |
| 260 | |
| 261 | return SIM_RC_OK; |
| 262 | } |
| 263 | |
| 264 | static const OPTION mips_options[] = |
| 265 | { |
| 266 | { {"dinero-trace", optional_argument, NULL, OPTION_DINERO_TRACE}, |
| 267 | '\0', "on|off", "Enable dinero tracing", |
| 268 | mips_option_handler }, |
| 269 | { {"dinero-file", required_argument, NULL, OPTION_DINERO_FILE}, |
| 270 | '\0', "FILE", "Write dinero trace to FILE", |
| 271 | mips_option_handler }, |
| 272 | /* start-sanitize-sky */ |
| 273 | { {"float-type", required_argument, NULL, OPTION_FLOAT_TYPE}, |
| 274 | '\0', "host|target", "Use host (fast) or target (accurate) floating point", |
| 275 | mips_option_handler }, |
| 276 | /* end-sanitize-sky */ |
| 277 | { {NULL, no_argument, NULL, 0}, '\0', NULL, NULL, NULL } |
| 278 | }; |
| 279 | |
| 280 | |
| 281 | int interrupt_pending; |
| 282 | |
| 283 | static void |
| 284 | interrupt_event (SIM_DESC sd, void *data) |
| 285 | { |
| 286 | sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ |
| 287 | if (SR & status_IE) |
| 288 | { |
| 289 | interrupt_pending = 0; |
| 290 | SignalExceptionInterrupt (); |
| 291 | } |
| 292 | else if (!interrupt_pending) |
| 293 | sim_events_schedule (sd, 1, interrupt_event, data); |
| 294 | } |
| 295 | |
| 296 | |
| 297 | /*---------------------------------------------------------------------------*/ |
| 298 | /*-- Device registration hook -----------------------------------------------*/ |
| 299 | /*---------------------------------------------------------------------------*/ |
| 300 | static void device_init(SIM_DESC sd) { |
| 301 | #ifdef DEVICE_INIT |
| 302 | extern void register_devices(SIM_DESC); |
| 303 | register_devices(sd); |
| 304 | #endif |
| 305 | } |
| 306 | |
| 307 | /*---------------------------------------------------------------------------*/ |
| 308 | /*-- GDB simulator interface ------------------------------------------------*/ |
| 309 | /*---------------------------------------------------------------------------*/ |
| 310 | |
| 311 | SIM_DESC |
| 312 | sim_open (kind, cb, abfd, argv) |
| 313 | SIM_OPEN_KIND kind; |
| 314 | host_callback *cb; |
| 315 | struct _bfd *abfd; |
| 316 | char **argv; |
| 317 | { |
| 318 | SIM_DESC sd = sim_state_alloc (kind, cb); |
| 319 | sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ |
| 320 | |
| 321 | SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER); |
| 322 | |
| 323 | /* FIXME: watchpoints code shouldn't need this */ |
| 324 | STATE_WATCHPOINTS (sd)->pc = &(PC); |
| 325 | STATE_WATCHPOINTS (sd)->sizeof_pc = sizeof (PC); |
| 326 | STATE_WATCHPOINTS (sd)->interrupt_handler = interrupt_event; |
| 327 | |
| 328 | STATE = 0; |
| 329 | |
| 330 | if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK) |
| 331 | return 0; |
| 332 | sim_add_option_table (sd, NULL, mips_options); |
| 333 | |
| 334 | /* Allocate core managed memory */ |
| 335 | |
| 336 | /* the monitor */ |
| 337 | sim_do_commandf (sd, "memory region 0x%lx,0x%lx", MONITOR_BASE, MONITOR_SIZE); |
| 338 | /* For compatibility with the old code - under this (at level one) |
| 339 | are the kernel spaces K0 & K1. Both of these map to a single |
| 340 | smaller sub region */ |
| 341 | sim_do_command(sd," memory region 0x7fff8000,0x8000") ; /* MTZ- 32 k stack */ |
| 342 | /* start-sanitize-sky */ |
| 343 | #ifndef TARGET_SKY |
| 344 | /* end-sanitize-sky */ |
| 345 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx%%0x%lx,0x%0x", |
| 346 | K1BASE, K0SIZE, |
| 347 | MEM_SIZE, /* actual size */ |
| 348 | K0BASE); |
| 349 | /* start-sanitize-sky */ |
| 350 | #else |
| 351 | sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx%%0x%lx,0x%0x,0x%0x", |
| 352 | K1BASE, K0SIZE, |
| 353 | MEM_SIZE, /* actual size */ |
| 354 | K0BASE, |
| 355 | 0); /* add alias at 0x0000 */ |
| 356 | #endif |
| 357 | /* end-sanitize-sky */ |
| 358 | |
| 359 | device_init(sd); |
| 360 | |
| 361 | /* getopt will print the error message so we just have to exit if this fails. |
| 362 | FIXME: Hmmm... in the case of gdb we need getopt to call |
| 363 | print_filtered. */ |
| 364 | if (sim_parse_args (sd, argv) != SIM_RC_OK) |
| 365 | { |
| 366 | /* Uninstall the modules to avoid memory leaks, |
| 367 | file descriptor leaks, etc. */ |
| 368 | sim_module_uninstall (sd); |
| 369 | return 0; |
| 370 | } |
| 371 | |
| 372 | /* check for/establish the a reference program image */ |
| 373 | if (sim_analyze_program (sd, |
| 374 | (STATE_PROG_ARGV (sd) != NULL |
| 375 | ? *STATE_PROG_ARGV (sd) |
| 376 | : NULL), |
| 377 | abfd) != SIM_RC_OK) |
| 378 | { |
| 379 | sim_module_uninstall (sd); |
| 380 | return 0; |
| 381 | } |
| 382 | |
| 383 | /* Configure/verify the target byte order and other runtime |
| 384 | configuration options */ |
| 385 | if (sim_config (sd) != SIM_RC_OK) |
| 386 | { |
| 387 | sim_module_uninstall (sd); |
| 388 | return 0; |
| 389 | } |
| 390 | |
| 391 | if (sim_post_argv_init (sd) != SIM_RC_OK) |
| 392 | { |
| 393 | /* Uninstall the modules to avoid memory leaks, |
| 394 | file descriptor leaks, etc. */ |
| 395 | sim_module_uninstall (sd); |
| 396 | return 0; |
| 397 | } |
| 398 | |
| 399 | /* verify assumptions the simulator made about the host type system. |
| 400 | This macro does not return if there is a problem */ |
| 401 | SIM_ASSERT (sizeof(int) == (4 * sizeof(char))); |
| 402 | SIM_ASSERT (sizeof(word64) == (8 * sizeof(char))); |
| 403 | |
| 404 | /* This is NASTY, in that we are assuming the size of specific |
| 405 | registers: */ |
| 406 | { |
| 407 | int rn; |
| 408 | for (rn = 0; (rn < (LAST_EMBED_REGNUM + 1)); rn++) |
| 409 | { |
| 410 | if (rn < 32) |
| 411 | cpu->register_widths[rn] = WITH_TARGET_WORD_BITSIZE; |
| 412 | else if ((rn >= FGRIDX) && (rn < (FGRIDX + NR_FGR))) |
| 413 | cpu->register_widths[rn] = WITH_TARGET_FLOATING_POINT_BITSIZE; |
| 414 | else if ((rn >= 33) && (rn <= 37)) |
| 415 | cpu->register_widths[rn] = WITH_TARGET_WORD_BITSIZE; |
| 416 | else if ((rn == SRIDX) |
| 417 | || (rn == FCR0IDX) |
| 418 | || (rn == FCR31IDX) |
| 419 | || ((rn >= 72) && (rn <= 89))) |
| 420 | cpu->register_widths[rn] = 32; |
| 421 | else |
| 422 | cpu->register_widths[rn] = 0; |
| 423 | } |
| 424 | /* start-sanitize-r5900 */ |
| 425 | |
| 426 | /* set the 5900 "upper" registers to 64 bits */ |
| 427 | for( rn = LAST_EMBED_REGNUM+1; rn < NUM_REGS; rn++) |
| 428 | cpu->register_widths[rn] = 64; |
| 429 | /* end-sanitize-r5900 */ |
| 430 | |
| 431 | /* start-sanitize-sky */ |
| 432 | #ifdef TARGET_SKY |
| 433 | /* Now the VU registers */ |
| 434 | for( rn = 0; rn < NUM_VU_INTEGER_REGS; rn++ ) { |
| 435 | cpu->register_widths[rn + NUM_R5900_REGS] = 16; |
| 436 | cpu->register_widths[rn + NUM_R5900_REGS + NUM_VU_REGS] = 16; |
| 437 | } |
| 438 | |
| 439 | for( rn = NUM_VU_INTEGER_REGS; rn < NUM_VU_REGS; rn++ ) { |
| 440 | cpu->register_widths[rn + NUM_R5900_REGS] = 32; |
| 441 | cpu->register_widths[rn + NUM_R5900_REGS + NUM_VU_REGS] = 32; |
| 442 | } |
| 443 | |
| 444 | /* Finally the VIF registers */ |
| 445 | for( rn = 2*NUM_VU_REGS; rn < 2*NUM_VU_REGS + 2*NUM_VIF_REGS; rn++ ) |
| 446 | cpu->register_widths[rn + NUM_R5900_REGS] = 32; |
| 447 | #endif |
| 448 | /* end-sanitize-sky */ |
| 449 | } |
| 450 | |
| 451 | #if defined(TRACE) |
| 452 | if (STATE & simTRACE) |
| 453 | open_trace(sd); |
| 454 | #endif /* TRACE */ |
| 455 | |
| 456 | /* Write the monitor trap address handlers into the monitor (eeprom) |
| 457 | address space. This can only be done once the target endianness |
| 458 | has been determined. */ |
| 459 | { |
| 460 | unsigned loop; |
| 461 | /* Entry into the IDT monitor is via fixed address vectors, and |
| 462 | not using machine instructions. To avoid clashing with use of |
| 463 | the MIPS TRAP system, we place our own (simulator specific) |
| 464 | "undefined" instructions into the relevant vector slots. */ |
| 465 | for (loop = 0; (loop < MONITOR_SIZE); loop += 4) |
| 466 | { |
| 467 | address_word vaddr = (MONITOR_BASE + loop); |
| 468 | unsigned32 insn = (RSVD_INSTRUCTION | (((loop >> 2) & RSVD_INSTRUCTION_ARG_MASK) << RSVD_INSTRUCTION_ARG_SHIFT)); |
| 469 | H2T (insn); |
| 470 | sim_write (sd, vaddr, (char *)&insn, sizeof (insn)); |
| 471 | } |
| 472 | /* The PMON monitor uses the same address space, but rather than |
| 473 | branching into it the address of a routine is loaded. We can |
| 474 | cheat for the moment, and direct the PMON routine to IDT style |
| 475 | instructions within the monitor space. This relies on the IDT |
| 476 | monitor not using the locations from 0xBFC00500 onwards as its |
| 477 | entry points.*/ |
| 478 | for (loop = 0; (loop < 24); loop++) |
| 479 | { |
| 480 | address_word vaddr = (MONITOR_BASE + 0x500 + (loop * 4)); |
| 481 | unsigned32 value = ((0x500 - 8) / 8); /* default UNDEFINED reason code */ |
| 482 | switch (loop) |
| 483 | { |
| 484 | case 0: /* read */ |
| 485 | value = 7; |
| 486 | break; |
| 487 | case 1: /* write */ |
| 488 | value = 8; |
| 489 | break; |
| 490 | case 2: /* open */ |
| 491 | value = 6; |
| 492 | break; |
| 493 | case 3: /* close */ |
| 494 | value = 10; |
| 495 | break; |
| 496 | case 5: /* printf */ |
| 497 | value = ((0x500 - 16) / 8); /* not an IDT reason code */ |
| 498 | break; |
| 499 | case 8: /* cliexit */ |
| 500 | value = 17; |
| 501 | break; |
| 502 | case 11: /* flush_cache */ |
| 503 | value = 28; |
| 504 | break; |
| 505 | } |
| 506 | /* FIXME - should monitor_base be SIM_ADDR?? */ |
| 507 | value = ((unsigned int)MONITOR_BASE + (value * 8)); |
| 508 | H2T (value); |
| 509 | sim_write (sd, vaddr, (char *)&value, sizeof (value)); |
| 510 | |
| 511 | /* The LSI MiniRISC PMON has its vectors at 0x200, not 0x500. */ |
| 512 | vaddr -= 0x300; |
| 513 | sim_write (sd, vaddr, (char *)&value, sizeof (value)); |
| 514 | } |
| 515 | } |
| 516 | |
| 517 | return sd; |
| 518 | } |
| 519 | |
| 520 | #if defined(TRACE) |
| 521 | static void |
| 522 | open_trace(sd) |
| 523 | SIM_DESC sd; |
| 524 | { |
| 525 | tracefh = fopen(tracefile,"wb+"); |
| 526 | if (tracefh == NULL) |
| 527 | { |
| 528 | sim_io_eprintf(sd,"Failed to create file \"%s\", writing trace information to stderr.\n",tracefile); |
| 529 | tracefh = stderr; |
| 530 | } |
| 531 | } |
| 532 | #endif /* TRACE */ |
| 533 | |
| 534 | void |
| 535 | sim_close (sd, quitting) |
| 536 | SIM_DESC sd; |
| 537 | int quitting; |
| 538 | { |
| 539 | #ifdef DEBUG |
| 540 | printf("DBG: sim_close: entered (quitting = %d)\n",quitting); |
| 541 | #endif |
| 542 | |
| 543 | /* "quitting" is non-zero if we cannot hang on errors */ |
| 544 | |
| 545 | /* Ensure that any resources allocated through the callback |
| 546 | mechanism are released: */ |
| 547 | sim_io_shutdown (sd); |
| 548 | |
| 549 | #if defined(TRACE) |
| 550 | if (tracefh != NULL && tracefh != stderr) |
| 551 | fclose(tracefh); |
| 552 | tracefh = NULL; |
| 553 | #endif /* TRACE */ |
| 554 | |
| 555 | /* FIXME - free SD */ |
| 556 | |
| 557 | return; |
| 558 | } |
| 559 | |
| 560 | |
| 561 | int |
| 562 | sim_write (sd,addr,buffer,size) |
| 563 | SIM_DESC sd; |
| 564 | SIM_ADDR addr; |
| 565 | unsigned char *buffer; |
| 566 | int size; |
| 567 | { |
| 568 | int index; |
| 569 | sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ |
| 570 | |
| 571 | /* Return the number of bytes written, or zero if error. */ |
| 572 | #ifdef DEBUG |
| 573 | sim_io_printf(sd,"sim_write(0x%s,buffer,%d);\n",pr_addr(addr),size); |
| 574 | #endif |
| 575 | |
| 576 | /* We use raw read and write routines, since we do not want to count |
| 577 | the GDB memory accesses in our statistics gathering. */ |
| 578 | |
| 579 | for (index = 0; index < size; index++) |
| 580 | { |
| 581 | address_word vaddr = (address_word)addr + index; |
| 582 | address_word paddr; |
| 583 | int cca; |
| 584 | if (!address_translation (SD, CPU, NULL_CIA, vaddr, isDATA, isSTORE, &paddr, &cca, isRAW)) |
| 585 | break; |
| 586 | if (sim_core_write_buffer (SD, CPU, read_map, buffer + index, paddr, 1) != 1) |
| 587 | break; |
| 588 | } |
| 589 | |
| 590 | return(index); |
| 591 | } |
| 592 | |
| 593 | int |
| 594 | sim_read (sd,addr,buffer,size) |
| 595 | SIM_DESC sd; |
| 596 | SIM_ADDR addr; |
| 597 | unsigned char *buffer; |
| 598 | int size; |
| 599 | { |
| 600 | int index; |
| 601 | sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ |
| 602 | |
| 603 | /* Return the number of bytes read, or zero if error. */ |
| 604 | #ifdef DEBUG |
| 605 | sim_io_printf(sd,"sim_read(0x%s,buffer,%d);\n",pr_addr(addr),size); |
| 606 | #endif /* DEBUG */ |
| 607 | |
| 608 | for (index = 0; (index < size); index++) |
| 609 | { |
| 610 | address_word vaddr = (address_word)addr + index; |
| 611 | address_word paddr; |
| 612 | int cca; |
| 613 | if (!address_translation (SD, CPU, NULL_CIA, vaddr, isDATA, isLOAD, &paddr, &cca, isRAW)) |
| 614 | break; |
| 615 | if (sim_core_read_buffer (SD, CPU, read_map, buffer + index, paddr, 1) != 1) |
| 616 | break; |
| 617 | } |
| 618 | |
| 619 | return(index); |
| 620 | } |
| 621 | |
| 622 | int |
| 623 | sim_store_register (sd,rn,memory,length) |
| 624 | SIM_DESC sd; |
| 625 | int rn; |
| 626 | unsigned char *memory; |
| 627 | int length; |
| 628 | { |
| 629 | sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ |
| 630 | /* NOTE: gdb (the client) stores registers in target byte order |
| 631 | while the simulator uses host byte order */ |
| 632 | #ifdef DEBUG |
| 633 | sim_io_printf(sd,"sim_store_register(%d,*memory=0x%s);\n",rn,pr_addr(*((SIM_ADDR *)memory))); |
| 634 | #endif /* DEBUG */ |
| 635 | |
| 636 | /* Unfortunately this suffers from the same problem as the register |
| 637 | numbering one. We need to know what the width of each logical |
| 638 | register number is for the architecture being simulated. */ |
| 639 | |
| 640 | if (cpu->register_widths[rn] == 0) |
| 641 | { |
| 642 | sim_io_eprintf(sd,"Invalid register width for %d (register store ignored)\n",rn); |
| 643 | return 0; |
| 644 | } |
| 645 | |
| 646 | /* start-sanitize-r5900 */ |
| 647 | if (rn >= 90 && rn < 90 + 32) |
| 648 | { |
| 649 | GPR1[rn - 90] = T2H_8 (*(unsigned64*)memory); |
| 650 | return 8; |
| 651 | } |
| 652 | switch (rn) |
| 653 | { |
| 654 | case REGISTER_SA: |
| 655 | SA = T2H_8(*(unsigned64*)memory); |
| 656 | return 8; |
| 657 | case 122: /* FIXME */ |
| 658 | LO1 = T2H_8(*(unsigned64*)memory); |
| 659 | return 8; |
| 660 | case 123: /* FIXME */ |
| 661 | HI1 = T2H_8(*(unsigned64*)memory); |
| 662 | return 8; |
| 663 | } |
| 664 | /* end-sanitize-r5900 */ |
| 665 | |
| 666 | /* start-sanitize-sky */ |
| 667 | #ifdef TARGET_SKY |
| 668 | if (rn >= NUM_R5900_REGS) |
| 669 | { |
| 670 | rn = rn - NUM_R5900_REGS; |
| 671 | |
| 672 | if( rn < NUM_VU_REGS ) |
| 673 | { |
| 674 | if (rn < NUM_VU_INTEGER_REGS) |
| 675 | return write_vu_int_reg (&(vu0_device.regs), rn, memory); |
| 676 | else if (rn >= FIRST_VEC_REG) |
| 677 | { |
| 678 | rn -= FIRST_VEC_REG; |
| 679 | return write_vu_vec_reg (&(vu0_device.regs), rn>>2, rn&3, |
| 680 | memory); |
| 681 | } |
| 682 | else switch (rn - NUM_VU_INTEGER_REGS) |
| 683 | { |
| 684 | case 0: |
| 685 | return write_vu_special_reg (&vu0_device, VU_REG_CIA, |
| 686 | memory); |
| 687 | case 1: |
| 688 | return write_vu_misc_reg (&(vu0_device.regs), VU_REG_MR, |
| 689 | memory); |
| 690 | case 2: /* VU0 has no P register */ |
| 691 | return 4; |
| 692 | case 3: |
| 693 | return write_vu_misc_reg (&(vu0_device.regs), VU_REG_MI, |
| 694 | memory); |
| 695 | case 4: |
| 696 | return write_vu_misc_reg (&(vu0_device.regs), VU_REG_MQ, |
| 697 | memory); |
| 698 | default: |
| 699 | return write_vu_acc_reg (&(vu0_device.regs), |
| 700 | rn - (NUM_VU_INTEGER_REGS + 5), |
| 701 | memory); |
| 702 | } |
| 703 | } |
| 704 | |
| 705 | rn = rn - NUM_VU_REGS; |
| 706 | |
| 707 | if (rn < NUM_VU_REGS) |
| 708 | { |
| 709 | if (rn < NUM_VU_INTEGER_REGS) |
| 710 | return write_vu_int_reg (&(vu1_device.regs), rn, memory); |
| 711 | else if (rn >= FIRST_VEC_REG) |
| 712 | { |
| 713 | rn -= FIRST_VEC_REG; |
| 714 | return write_vu_vec_reg (&(vu1_device.regs), |
| 715 | rn >> 2, rn & 3, memory); |
| 716 | } |
| 717 | else switch (rn - NUM_VU_INTEGER_REGS) |
| 718 | { |
| 719 | case 0: |
| 720 | return write_vu_special_reg (&vu1_device, VU_REG_CIA, |
| 721 | memory); |
| 722 | case 1: |
| 723 | return write_vu_misc_reg (&(vu1_device.regs), VU_REG_MR, |
| 724 | memory); |
| 725 | case 2: |
| 726 | return write_vu_misc_reg (&(vu1_device.regs), VU_REG_MP, |
| 727 | memory); |
| 728 | case 3: |
| 729 | return write_vu_misc_reg (&(vu1_device.regs), VU_REG_MI, |
| 730 | memory); |
| 731 | case 4: |
| 732 | return write_vu_misc_reg (&(vu1_device.regs), VU_REG_MQ, |
| 733 | memory); |
| 734 | default: |
| 735 | return write_vu_acc_reg (&(vu1_device.regs), |
| 736 | rn - (NUM_VU_INTEGER_REGS + 5), |
| 737 | memory); |
| 738 | } |
| 739 | } |
| 740 | |
| 741 | rn -= NUM_VU_REGS; /* VIF0 registers are next */ |
| 742 | |
| 743 | if (rn < NUM_VIF_REGS) |
| 744 | { |
| 745 | if (rn < NUM_VIF_REGS-1) |
| 746 | return write_pke_reg (&pke0_device, rn, memory); |
| 747 | else |
| 748 | { |
| 749 | sim_io_eprintf( sd, "Can't write vif0_pc (store ignored)\n" ); |
| 750 | return 0; |
| 751 | } |
| 752 | } |
| 753 | |
| 754 | rn -= NUM_VIF_REGS; /* VIF1 registers are last */ |
| 755 | |
| 756 | if (rn < NUM_VIF_REGS) |
| 757 | { |
| 758 | if (rn < NUM_VIF_REGS-1) |
| 759 | return write_pke_reg (&pke1_device, rn, memory); |
| 760 | else |
| 761 | { |
| 762 | sim_io_eprintf( sd, "Can't write vif1_pc (store ignored)\n" ); |
| 763 | return 0; |
| 764 | } |
| 765 | } |
| 766 | |
| 767 | sim_io_eprintf( sd, "Invalid VU register (register store ignored)\n" ); |
| 768 | return 0; |
| 769 | } |
| 770 | #endif |
| 771 | /* end-sanitize-sky */ |
| 772 | |
| 773 | if (rn >= FGRIDX && rn < FGRIDX + NR_FGR) |
| 774 | { |
| 775 | if (cpu->register_widths[rn] == 32) |
| 776 | { |
| 777 | cpu->fgr[rn - FGRIDX] = T2H_4 (*(unsigned32*)memory); |
| 778 | return 4; |
| 779 | } |
| 780 | else |
| 781 | { |
| 782 | cpu->fgr[rn - FGRIDX] = T2H_8 (*(unsigned64*)memory); |
| 783 | return 8; |
| 784 | } |
| 785 | } |
| 786 | |
| 787 | if (cpu->register_widths[rn] == 32) |
| 788 | { |
| 789 | cpu->registers[rn] = T2H_4 (*(unsigned32*)memory); |
| 790 | return 4; |
| 791 | } |
| 792 | else |
| 793 | { |
| 794 | cpu->registers[rn] = T2H_8 (*(unsigned64*)memory); |
| 795 | return 8; |
| 796 | } |
| 797 | |
| 798 | return 0; |
| 799 | } |
| 800 | |
| 801 | int |
| 802 | sim_fetch_register (sd,rn,memory,length) |
| 803 | SIM_DESC sd; |
| 804 | int rn; |
| 805 | unsigned char *memory; |
| 806 | int length; |
| 807 | { |
| 808 | sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ |
| 809 | /* NOTE: gdb (the client) stores registers in target byte order |
| 810 | while the simulator uses host byte order */ |
| 811 | #ifdef DEBUG |
| 812 | sim_io_printf(sd,"sim_fetch_register(%d=0x%s,mem) : place simulator registers into memory\n",rn,pr_addr(registers[rn])); |
| 813 | #endif /* DEBUG */ |
| 814 | |
| 815 | if (cpu->register_widths[rn] == 0) |
| 816 | { |
| 817 | sim_io_eprintf (sd, "Invalid register width for %d (register fetch ignored)\n",rn); |
| 818 | return 0; |
| 819 | } |
| 820 | |
| 821 | /* start-sanitize-r5900 */ |
| 822 | if (rn >= 90 && rn < 90 + 32) |
| 823 | { |
| 824 | *(unsigned64*)memory = GPR1[rn - 90]; |
| 825 | return 8; |
| 826 | } |
| 827 | switch (rn) |
| 828 | { |
| 829 | case REGISTER_SA: |
| 830 | *((unsigned64*)memory) = H2T_8(SA); |
| 831 | return 8; |
| 832 | case 122: /* FIXME */ |
| 833 | *((unsigned64*)memory) = H2T_8(LO1); |
| 834 | return 8; |
| 835 | case 123: /* FIXME */ |
| 836 | *((unsigned64*)memory) = H2T_8(HI1); |
| 837 | return 8; |
| 838 | } |
| 839 | /* end-sanitize-r5900 */ |
| 840 | |
| 841 | /* start-sanitize-sky */ |
| 842 | #ifdef TARGET_SKY |
| 843 | if (rn >= NUM_R5900_REGS) |
| 844 | { |
| 845 | rn = rn - NUM_R5900_REGS; |
| 846 | |
| 847 | if (rn < NUM_VU_REGS) |
| 848 | { |
| 849 | if (rn < NUM_VU_INTEGER_REGS) |
| 850 | return read_vu_int_reg (&(vu0_device.regs), rn, memory); |
| 851 | else if (rn >= FIRST_VEC_REG) |
| 852 | { |
| 853 | rn -= FIRST_VEC_REG; |
| 854 | return read_vu_vec_reg (&(vu0_device.regs), rn>>2, rn & 3, |
| 855 | memory); |
| 856 | } |
| 857 | else switch (rn - NUM_VU_INTEGER_REGS) |
| 858 | { |
| 859 | case 0: |
| 860 | return read_vu_special_reg(&vu0_device, VU_REG_CIA, memory); |
| 861 | case 1: |
| 862 | return read_vu_misc_reg (&(vu0_device.regs), VU_REG_MR, |
| 863 | memory); |
| 864 | case 2: /* VU0 has no P register */ |
| 865 | *((int *) memory) = 0; |
| 866 | return 4; |
| 867 | case 3: |
| 868 | return read_vu_misc_reg (&(vu0_device.regs), VU_REG_MI, |
| 869 | memory); |
| 870 | case 4: |
| 871 | return read_vu_misc_reg (&(vu0_device.regs), VU_REG_MQ, |
| 872 | memory); |
| 873 | default: |
| 874 | return read_vu_acc_reg (&(vu0_device.regs), |
| 875 | rn - (NUM_VU_INTEGER_REGS + 5), |
| 876 | memory); |
| 877 | } |
| 878 | } |
| 879 | |
| 880 | rn -= NUM_VU_REGS; /* VU1 registers are next */ |
| 881 | |
| 882 | if (rn < NUM_VU_REGS) |
| 883 | { |
| 884 | if (rn < NUM_VU_INTEGER_REGS) |
| 885 | return read_vu_int_reg (&(vu1_device.regs), rn, memory); |
| 886 | else if (rn >= FIRST_VEC_REG) |
| 887 | { |
| 888 | rn -= FIRST_VEC_REG; |
| 889 | return read_vu_vec_reg (&(vu1_device.regs), |
| 890 | rn >> 2, rn & 3, memory); |
| 891 | } |
| 892 | else switch (rn - NUM_VU_INTEGER_REGS) |
| 893 | { |
| 894 | case 0: |
| 895 | return read_vu_special_reg(&vu1_device, VU_REG_CIA, memory); |
| 896 | case 1: |
| 897 | return read_vu_misc_reg (&(vu1_device.regs), |
| 898 | VU_REG_MR, memory); |
| 899 | case 2: |
| 900 | return read_vu_misc_reg (&(vu1_device.regs), |
| 901 | VU_REG_MP, memory); |
| 902 | case 3: |
| 903 | return read_vu_misc_reg (&(vu1_device.regs), |
| 904 | VU_REG_MI, memory); |
| 905 | case 4: |
| 906 | return read_vu_misc_reg (&(vu1_device.regs), |
| 907 | VU_REG_MQ, memory); |
| 908 | default: |
| 909 | return read_vu_acc_reg (&(vu1_device.regs), |
| 910 | rn - (NUM_VU_INTEGER_REGS + 5), |
| 911 | memory); |
| 912 | } |
| 913 | } |
| 914 | |
| 915 | rn -= NUM_VU_REGS; /* VIF0 registers are next */ |
| 916 | |
| 917 | if (rn < NUM_VIF_REGS) |
| 918 | { |
| 919 | if (rn < NUM_VIF_REGS-1) |
| 920 | return read_pke_reg (&pke0_device, rn, memory); |
| 921 | else |
| 922 | return read_pke_pc (&pke0_device, memory); |
| 923 | } |
| 924 | |
| 925 | rn -= NUM_VIF_REGS; /* VIF1 registers are last */ |
| 926 | |
| 927 | if (rn < NUM_VIF_REGS) |
| 928 | { |
| 929 | if (rn < NUM_VIF_REGS-1) |
| 930 | return read_pke_reg (&pke1_device, rn, memory); |
| 931 | else |
| 932 | return read_pke_pc (&pke1_device, memory); |
| 933 | } |
| 934 | |
| 935 | sim_io_eprintf( sd, "Invalid VU register (register fetch ignored)\n" ); |
| 936 | } |
| 937 | #endif |
| 938 | /* end-sanitize-sky */ |
| 939 | |
| 940 | /* Any floating point register */ |
| 941 | if (rn >= FGRIDX && rn < FGRIDX + NR_FGR) |
| 942 | { |
| 943 | if (cpu->register_widths[rn] == 32) |
| 944 | { |
| 945 | *(unsigned32*)memory = H2T_4 (cpu->fgr[rn - FGRIDX]); |
| 946 | return 4; |
| 947 | } |
| 948 | else |
| 949 | { |
| 950 | *(unsigned64*)memory = H2T_8 (cpu->fgr[rn - FGRIDX]); |
| 951 | return 8; |
| 952 | } |
| 953 | } |
| 954 | |
| 955 | if (cpu->register_widths[rn] == 32) |
| 956 | { |
| 957 | *(unsigned32*)memory = H2T_4 ((unsigned32)(cpu->registers[rn])); |
| 958 | return 4; |
| 959 | } |
| 960 | else |
| 961 | { |
| 962 | *(unsigned64*)memory = H2T_8 ((unsigned64)(cpu->registers[rn])); |
| 963 | return 8; |
| 964 | } |
| 965 | |
| 966 | return 0; |
| 967 | } |
| 968 | |
| 969 | |
| 970 | SIM_RC |
| 971 | sim_create_inferior (sd, abfd, argv,env) |
| 972 | SIM_DESC sd; |
| 973 | struct _bfd *abfd; |
| 974 | char **argv; |
| 975 | char **env; |
| 976 | { |
| 977 | |
| 978 | #ifdef DEBUG |
| 979 | printf("DBG: sim_create_inferior entered: start_address = 0x%s\n", |
| 980 | pr_addr(PC)); |
| 981 | #endif /* DEBUG */ |
| 982 | |
| 983 | ColdReset(sd); |
| 984 | |
| 985 | if (abfd != NULL) |
| 986 | { |
| 987 | /* override PC value set by ColdReset () */ |
| 988 | int cpu_nr; |
| 989 | for (cpu_nr = 0; cpu_nr < sim_engine_nr_cpus (sd); cpu_nr++) |
| 990 | { |
| 991 | sim_cpu *cpu = STATE_CPU (sd, cpu_nr); |
| 992 | CIA_SET (cpu, (unsigned64) bfd_get_start_address (abfd)); |
| 993 | } |
| 994 | } |
| 995 | |
| 996 | #if 0 /* def DEBUG */ |
| 997 | if (argv || env) |
| 998 | { |
| 999 | /* We should really place the argv slot values into the argument |
| 1000 | registers, and onto the stack as required. However, this |
| 1001 | assumes that we have a stack defined, which is not |
| 1002 | necessarily true at the moment. */ |
| 1003 | char **cptr; |
| 1004 | sim_io_printf(sd,"sim_create_inferior() : passed arguments ignored\n"); |
| 1005 | for (cptr = argv; (cptr && *cptr); cptr++) |
| 1006 | printf("DBG: arg \"%s\"\n",*cptr); |
| 1007 | } |
| 1008 | #endif /* DEBUG */ |
| 1009 | |
| 1010 | return SIM_RC_OK; |
| 1011 | } |
| 1012 | |
| 1013 | void |
| 1014 | sim_do_command (sd,cmd) |
| 1015 | SIM_DESC sd; |
| 1016 | char *cmd; |
| 1017 | { |
| 1018 | if (sim_args_command (sd, cmd) != SIM_RC_OK) |
| 1019 | sim_io_printf (sd, "Error: \"%s\" is not a valid MIPS simulator command.\n", |
| 1020 | cmd); |
| 1021 | } |
| 1022 | |
| 1023 | /*---------------------------------------------------------------------------*/ |
| 1024 | /*-- Private simulator support interface ------------------------------------*/ |
| 1025 | /*---------------------------------------------------------------------------*/ |
| 1026 | |
| 1027 | /* Read a null terminated string from memory, return in a buffer */ |
| 1028 | static char * |
| 1029 | fetch_str (sd, addr) |
| 1030 | SIM_DESC sd; |
| 1031 | address_word addr; |
| 1032 | { |
| 1033 | char *buf; |
| 1034 | int nr = 0; |
| 1035 | char null; |
| 1036 | while (sim_read (sd, addr + nr, &null, 1) == 1 && null != 0) |
| 1037 | nr++; |
| 1038 | buf = NZALLOC (char, nr + 1); |
| 1039 | sim_read (sd, addr, buf, nr); |
| 1040 | return buf; |
| 1041 | } |
| 1042 | |
| 1043 | /* Simple monitor interface (currently setup for the IDT and PMON monitors) */ |
| 1044 | static void |
| 1045 | sim_monitor (SIM_DESC sd, |
| 1046 | sim_cpu *cpu, |
| 1047 | address_word cia, |
| 1048 | unsigned int reason) |
| 1049 | { |
| 1050 | #ifdef DEBUG |
| 1051 | printf("DBG: sim_monitor: entered (reason = %d)\n",reason); |
| 1052 | #endif /* DEBUG */ |
| 1053 | |
| 1054 | /* The IDT monitor actually allows two instructions per vector |
| 1055 | slot. However, the simulator currently causes a trap on each |
| 1056 | individual instruction. We cheat, and lose the bottom bit. */ |
| 1057 | reason >>= 1; |
| 1058 | |
| 1059 | /* The following callback functions are available, however the |
| 1060 | monitor we are simulating does not make use of them: get_errno, |
| 1061 | isatty, lseek, rename, system, time and unlink */ |
| 1062 | switch (reason) |
| 1063 | { |
| 1064 | |
| 1065 | case 6: /* int open(char *path,int flags) */ |
| 1066 | { |
| 1067 | char *path = fetch_str (sd, A0); |
| 1068 | V0 = sim_io_open (sd, path, (int)A1); |
| 1069 | zfree (path); |
| 1070 | break; |
| 1071 | } |
| 1072 | |
| 1073 | case 7: /* int read(int file,char *ptr,int len) */ |
| 1074 | { |
| 1075 | int fd = A0; |
| 1076 | int nr = A2; |
| 1077 | char *buf = zalloc (nr); |
| 1078 | V0 = sim_io_read (sd, fd, buf, nr); |
| 1079 | sim_write (sd, A1, buf, nr); |
| 1080 | zfree (buf); |
| 1081 | } |
| 1082 | break; |
| 1083 | |
| 1084 | case 8: /* int write(int file,char *ptr,int len) */ |
| 1085 | { |
| 1086 | int fd = A0; |
| 1087 | int nr = A2; |
| 1088 | char *buf = zalloc (nr); |
| 1089 | sim_read (sd, A1, buf, nr); |
| 1090 | V0 = sim_io_write (sd, fd, buf, nr); |
| 1091 | zfree (buf); |
| 1092 | break; |
| 1093 | } |
| 1094 | |
| 1095 | case 10: /* int close(int file) */ |
| 1096 | { |
| 1097 | V0 = sim_io_close (sd, (int)A0); |
| 1098 | break; |
| 1099 | } |
| 1100 | |
| 1101 | case 2: /* Densan monitor: char inbyte(int waitflag) */ |
| 1102 | { |
| 1103 | if (A0 == 0) /* waitflag == NOWAIT */ |
| 1104 | V0 = (unsigned_word)-1; |
| 1105 | } |
| 1106 | /* Drop through to case 11 */ |
| 1107 | |
| 1108 | case 11: /* char inbyte(void) */ |
| 1109 | { |
| 1110 | char tmp; |
| 1111 | if (sim_io_read_stdin (sd, &tmp, sizeof(char)) != sizeof(char)) |
| 1112 | { |
| 1113 | sim_io_error(sd,"Invalid return from character read"); |
| 1114 | V0 = (unsigned_word)-1; |
| 1115 | } |
| 1116 | else |
| 1117 | V0 = (unsigned_word)tmp; |
| 1118 | break; |
| 1119 | } |
| 1120 | |
| 1121 | case 3: /* Densan monitor: void co(char chr) */ |
| 1122 | case 12: /* void outbyte(char chr) : write a byte to "stdout" */ |
| 1123 | { |
| 1124 | char tmp = (char)(A0 & 0xFF); |
| 1125 | sim_io_write_stdout (sd, &tmp, sizeof(char)); |
| 1126 | break; |
| 1127 | } |
| 1128 | |
| 1129 | case 17: /* void _exit() */ |
| 1130 | { |
| 1131 | sim_io_eprintf (sd, "sim_monitor(17): _exit(int reason) to be coded\n"); |
| 1132 | sim_engine_halt (SD, CPU, NULL, NULL_CIA, sim_exited, |
| 1133 | (unsigned int)(A0 & 0xFFFFFFFF)); |
| 1134 | break; |
| 1135 | } |
| 1136 | |
| 1137 | case 28 : /* PMON flush_cache */ |
| 1138 | break; |
| 1139 | |
| 1140 | case 55: /* void get_mem_info(unsigned int *ptr) */ |
| 1141 | /* in: A0 = pointer to three word memory location */ |
| 1142 | /* out: [A0 + 0] = size */ |
| 1143 | /* [A0 + 4] = instruction cache size */ |
| 1144 | /* [A0 + 8] = data cache size */ |
| 1145 | { |
| 1146 | unsigned_4 value = MEM_SIZE /* FIXME STATE_MEM_SIZE (sd) */; |
| 1147 | unsigned_4 zero = 0; |
| 1148 | H2T (value); |
| 1149 | sim_write (sd, A0 + 0, (char *)&value, 4); |
| 1150 | sim_write (sd, A0 + 4, (char *)&zero, 4); |
| 1151 | sim_write (sd, A0 + 8, (char *)&zero, 4); |
| 1152 | /* sim_io_eprintf (sd, "sim: get_mem_info() depreciated\n"); */ |
| 1153 | break; |
| 1154 | } |
| 1155 | |
| 1156 | case 158 : /* PMON printf */ |
| 1157 | /* in: A0 = pointer to format string */ |
| 1158 | /* A1 = optional argument 1 */ |
| 1159 | /* A2 = optional argument 2 */ |
| 1160 | /* A3 = optional argument 3 */ |
| 1161 | /* out: void */ |
| 1162 | /* The following is based on the PMON printf source */ |
| 1163 | { |
| 1164 | address_word s = A0; |
| 1165 | char c; |
| 1166 | signed_word *ap = &A1; /* 1st argument */ |
| 1167 | /* This isn't the quickest way, since we call the host print |
| 1168 | routine for every character almost. But it does avoid |
| 1169 | having to allocate and manage a temporary string buffer. */ |
| 1170 | /* TODO: Include check that we only use three arguments (A1, |
| 1171 | A2 and A3) */ |
| 1172 | while (sim_read (sd, s++, &c, 1) && c != '\0') |
| 1173 | { |
| 1174 | if (c == '%') |
| 1175 | { |
| 1176 | char tmp[40]; |
| 1177 | enum {FMT_RJUST, FMT_LJUST, FMT_RJUST0, FMT_CENTER} fmt = FMT_RJUST; |
| 1178 | int width = 0, trunc = 0, haddot = 0, longlong = 0; |
| 1179 | while (sim_read (sd, s++, &c, 1) && c != '\0') |
| 1180 | { |
| 1181 | if (strchr ("dobxXulscefg%", s)) |
| 1182 | break; |
| 1183 | else if (c == '-') |
| 1184 | fmt = FMT_LJUST; |
| 1185 | else if (c == '0') |
| 1186 | fmt = FMT_RJUST0; |
| 1187 | else if (c == '~') |
| 1188 | fmt = FMT_CENTER; |
| 1189 | else if (c == '*') |
| 1190 | { |
| 1191 | if (haddot) |
| 1192 | trunc = (int)*ap++; |
| 1193 | else |
| 1194 | width = (int)*ap++; |
| 1195 | } |
| 1196 | else if (c >= '1' && c <= '9') |
| 1197 | { |
| 1198 | address_word t = s; |
| 1199 | unsigned int n; |
| 1200 | while (sim_read (sd, s++, &c, 1) == 1 && isdigit (c)) |
| 1201 | tmp[s - t] = c; |
| 1202 | tmp[s - t] = '\0'; |
| 1203 | n = (unsigned int)strtol(tmp,NULL,10); |
| 1204 | if (haddot) |
| 1205 | trunc = n; |
| 1206 | else |
| 1207 | width = n; |
| 1208 | s--; |
| 1209 | } |
| 1210 | else if (c == '.') |
| 1211 | haddot = 1; |
| 1212 | } |
| 1213 | switch (c) |
| 1214 | { |
| 1215 | case '%': |
| 1216 | sim_io_printf (sd, "%%"); |
| 1217 | break; |
| 1218 | case 's': |
| 1219 | if ((int)*ap != 0) |
| 1220 | { |
| 1221 | address_word p = *ap++; |
| 1222 | char ch; |
| 1223 | while (sim_read (sd, p++, &ch, 1) == 1 && ch != '\0') |
| 1224 | sim_io_printf(sd, "%c", ch); |
| 1225 | } |
| 1226 | else |
| 1227 | sim_io_printf(sd,"(null)"); |
| 1228 | break; |
| 1229 | case 'c': |
| 1230 | sim_io_printf (sd, "%c", (int)*ap++); |
| 1231 | break; |
| 1232 | default: |
| 1233 | if (c == 'l') |
| 1234 | { |
| 1235 | sim_read (sd, s++, &c, 1); |
| 1236 | if (c == 'l') |
| 1237 | { |
| 1238 | longlong = 1; |
| 1239 | sim_read (sd, s++, &c, 1); |
| 1240 | } |
| 1241 | } |
| 1242 | if (strchr ("dobxXu", c)) |
| 1243 | { |
| 1244 | word64 lv = (word64) *ap++; |
| 1245 | if (c == 'b') |
| 1246 | sim_io_printf(sd,"<binary not supported>"); |
| 1247 | else |
| 1248 | { |
| 1249 | sprintf (tmp, "%%%s%c", longlong ? "ll" : "", c); |
| 1250 | if (longlong) |
| 1251 | sim_io_printf(sd, tmp, lv); |
| 1252 | else |
| 1253 | sim_io_printf(sd, tmp, (int)lv); |
| 1254 | } |
| 1255 | } |
| 1256 | else if (strchr ("eEfgG", c)) |
| 1257 | { |
| 1258 | double dbl = *(double*)(ap++); |
| 1259 | sprintf (tmp, "%%%d.%d%c", width, trunc, c); |
| 1260 | sim_io_printf (sd, tmp, dbl); |
| 1261 | trunc = 0; |
| 1262 | } |
| 1263 | } |
| 1264 | } |
| 1265 | else |
| 1266 | sim_io_printf(sd, "%c", c); |
| 1267 | } |
| 1268 | break; |
| 1269 | } |
| 1270 | |
| 1271 | default: |
| 1272 | sim_io_error (sd, "TODO: sim_monitor(%d) : PC = 0x%s\n", |
| 1273 | reason, pr_addr(cia)); |
| 1274 | break; |
| 1275 | } |
| 1276 | return; |
| 1277 | } |
| 1278 | |
| 1279 | /* Store a word into memory. */ |
| 1280 | |
| 1281 | static void |
| 1282 | store_word (SIM_DESC sd, |
| 1283 | sim_cpu *cpu, |
| 1284 | address_word cia, |
| 1285 | uword64 vaddr, |
| 1286 | signed_word val) |
| 1287 | { |
| 1288 | address_word paddr; |
| 1289 | int uncached; |
| 1290 | |
| 1291 | if ((vaddr & 3) != 0) |
| 1292 | SignalExceptionAddressStore (); |
| 1293 | else |
| 1294 | { |
| 1295 | if (AddressTranslation (vaddr, isDATA, isSTORE, &paddr, &uncached, |
| 1296 | isTARGET, isREAL)) |
| 1297 | { |
| 1298 | const uword64 mask = 7; |
| 1299 | uword64 memval; |
| 1300 | unsigned int byte; |
| 1301 | |
| 1302 | paddr = (paddr & ~mask) | ((paddr & mask) ^ (ReverseEndian << 2)); |
| 1303 | byte = (vaddr & mask) ^ (BigEndianCPU << 2); |
| 1304 | memval = ((uword64) val) << (8 * byte); |
| 1305 | StoreMemory (uncached, AccessLength_WORD, memval, 0, paddr, vaddr, |
| 1306 | isREAL); |
| 1307 | } |
| 1308 | } |
| 1309 | } |
| 1310 | |
| 1311 | /* Load a word from memory. */ |
| 1312 | |
| 1313 | static signed_word |
| 1314 | load_word (SIM_DESC sd, |
| 1315 | sim_cpu *cpu, |
| 1316 | address_word cia, |
| 1317 | uword64 vaddr) |
| 1318 | { |
| 1319 | if ((vaddr & 3) != 0) |
| 1320 | SignalExceptionAddressLoad (); |
| 1321 | else |
| 1322 | { |
| 1323 | address_word paddr; |
| 1324 | int uncached; |
| 1325 | |
| 1326 | if (AddressTranslation (vaddr, isDATA, isLOAD, &paddr, &uncached, |
| 1327 | isTARGET, isREAL)) |
| 1328 | { |
| 1329 | const uword64 mask = 0x7; |
| 1330 | const unsigned int reverse = ReverseEndian ? 1 : 0; |
| 1331 | const unsigned int bigend = BigEndianCPU ? 1 : 0; |
| 1332 | uword64 memval; |
| 1333 | unsigned int byte; |
| 1334 | |
| 1335 | paddr = (paddr & ~mask) | ((paddr & mask) ^ (reverse << 2)); |
| 1336 | LoadMemory (&memval,NULL,uncached, AccessLength_WORD, paddr, vaddr, |
| 1337 | isDATA, isREAL); |
| 1338 | byte = (vaddr & mask) ^ (bigend << 2); |
| 1339 | return SIGNEXTEND (((memval >> (8 * byte)) & 0xffffffff), 32); |
| 1340 | } |
| 1341 | } |
| 1342 | |
| 1343 | return 0; |
| 1344 | } |
| 1345 | |
| 1346 | /* Simulate the mips16 entry and exit pseudo-instructions. These |
| 1347 | would normally be handled by the reserved instruction exception |
| 1348 | code, but for ease of simulation we just handle them directly. */ |
| 1349 | |
| 1350 | static void |
| 1351 | mips16_entry (SIM_DESC sd, |
| 1352 | sim_cpu *cpu, |
| 1353 | address_word cia, |
| 1354 | unsigned int insn) |
| 1355 | { |
| 1356 | int aregs, sregs, rreg; |
| 1357 | |
| 1358 | #ifdef DEBUG |
| 1359 | printf("DBG: mips16_entry: entered (insn = 0x%08X)\n",insn); |
| 1360 | #endif /* DEBUG */ |
| 1361 | |
| 1362 | aregs = (insn & 0x700) >> 8; |
| 1363 | sregs = (insn & 0x0c0) >> 6; |
| 1364 | rreg = (insn & 0x020) >> 5; |
| 1365 | |
| 1366 | /* This should be checked by the caller. */ |
| 1367 | if (sregs == 3) |
| 1368 | abort (); |
| 1369 | |
| 1370 | if (aregs < 5) |
| 1371 | { |
| 1372 | int i; |
| 1373 | signed_word tsp; |
| 1374 | |
| 1375 | /* This is the entry pseudo-instruction. */ |
| 1376 | |
| 1377 | for (i = 0; i < aregs; i++) |
| 1378 | store_word (SD, CPU, cia, (uword64) (SP + 4 * i), GPR[i + 4]); |
| 1379 | |
| 1380 | tsp = SP; |
| 1381 | SP -= 32; |
| 1382 | |
| 1383 | if (rreg) |
| 1384 | { |
| 1385 | tsp -= 4; |
| 1386 | store_word (SD, CPU, cia, (uword64) tsp, RA); |
| 1387 | } |
| 1388 | |
| 1389 | for (i = 0; i < sregs; i++) |
| 1390 | { |
| 1391 | tsp -= 4; |
| 1392 | store_word (SD, CPU, cia, (uword64) tsp, GPR[16 + i]); |
| 1393 | } |
| 1394 | } |
| 1395 | else |
| 1396 | { |
| 1397 | int i; |
| 1398 | signed_word tsp; |
| 1399 | |
| 1400 | /* This is the exit pseudo-instruction. */ |
| 1401 | |
| 1402 | tsp = SP + 32; |
| 1403 | |
| 1404 | if (rreg) |
| 1405 | { |
| 1406 | tsp -= 4; |
| 1407 | RA = load_word (SD, CPU, cia, (uword64) tsp); |
| 1408 | } |
| 1409 | |
| 1410 | for (i = 0; i < sregs; i++) |
| 1411 | { |
| 1412 | tsp -= 4; |
| 1413 | GPR[i + 16] = load_word (SD, CPU, cia, (uword64) tsp); |
| 1414 | } |
| 1415 | |
| 1416 | SP += 32; |
| 1417 | |
| 1418 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT) |
| 1419 | { |
| 1420 | if (aregs == 5) |
| 1421 | { |
| 1422 | FGR[0] = WORD64LO (GPR[4]); |
| 1423 | FPR_STATE[0] = fmt_uninterpreted; |
| 1424 | } |
| 1425 | else if (aregs == 6) |
| 1426 | { |
| 1427 | FGR[0] = WORD64LO (GPR[5]); |
| 1428 | FGR[1] = WORD64LO (GPR[4]); |
| 1429 | FPR_STATE[0] = fmt_uninterpreted; |
| 1430 | FPR_STATE[1] = fmt_uninterpreted; |
| 1431 | } |
| 1432 | } |
| 1433 | |
| 1434 | PC = RA; |
| 1435 | } |
| 1436 | |
| 1437 | } |
| 1438 | |
| 1439 | /*-- trace support ----------------------------------------------------------*/ |
| 1440 | |
| 1441 | /* The TRACE support is provided (if required) in the memory accessing |
| 1442 | routines. Since we are also providing the architecture specific |
| 1443 | features, the architecture simulation code can also deal with |
| 1444 | notifying the TRACE world of cache flushes, etc. Similarly we do |
| 1445 | not need to provide profiling support in the simulator engine, |
| 1446 | since we can sample in the instruction fetch control loop. By |
| 1447 | defining the TRACE manifest, we add tracing as a run-time |
| 1448 | option. */ |
| 1449 | |
| 1450 | #if defined(TRACE) |
| 1451 | /* Tracing by default produces "din" format (as required by |
| 1452 | dineroIII). Each line of such a trace file *MUST* have a din label |
| 1453 | and address field. The rest of the line is ignored, so comments can |
| 1454 | be included if desired. The first field is the label which must be |
| 1455 | one of the following values: |
| 1456 | |
| 1457 | 0 read data |
| 1458 | 1 write data |
| 1459 | 2 instruction fetch |
| 1460 | 3 escape record (treated as unknown access type) |
| 1461 | 4 escape record (causes cache flush) |
| 1462 | |
| 1463 | The address field is a 32bit (lower-case) hexadecimal address |
| 1464 | value. The address should *NOT* be preceded by "0x". |
| 1465 | |
| 1466 | The size of the memory transfer is not important when dealing with |
| 1467 | cache lines (as long as no more than a cache line can be |
| 1468 | transferred in a single operation :-), however more information |
| 1469 | could be given following the dineroIII requirement to allow more |
| 1470 | complete memory and cache simulators to provide better |
| 1471 | results. i.e. the University of Pisa has a cache simulator that can |
| 1472 | also take bus size and speed as (variable) inputs to calculate |
| 1473 | complete system performance (a much more useful ability when trying |
| 1474 | to construct an end product, rather than a processor). They |
| 1475 | currently have an ARM version of their tool called ChARM. */ |
| 1476 | |
| 1477 | |
| 1478 | void |
| 1479 | dotrace (SIM_DESC sd, |
| 1480 | sim_cpu *cpu, |
| 1481 | FILE *tracefh, |
| 1482 | int type, |
| 1483 | SIM_ADDR address, |
| 1484 | int width, |
| 1485 | char *comment,...) |
| 1486 | { |
| 1487 | if (STATE & simTRACE) { |
| 1488 | va_list ap; |
| 1489 | fprintf(tracefh,"%d %s ; width %d ; ", |
| 1490 | type, |
| 1491 | pr_addr(address), |
| 1492 | width); |
| 1493 | va_start(ap,comment); |
| 1494 | vfprintf(tracefh,comment,ap); |
| 1495 | va_end(ap); |
| 1496 | fprintf(tracefh,"\n"); |
| 1497 | } |
| 1498 | /* NOTE: Since the "din" format will only accept 32bit addresses, and |
| 1499 | we may be generating 64bit ones, we should put the hi-32bits of the |
| 1500 | address into the comment field. */ |
| 1501 | |
| 1502 | /* TODO: Provide a buffer for the trace lines. We can then avoid |
| 1503 | performing writes until the buffer is filled, or the file is |
| 1504 | being closed. */ |
| 1505 | |
| 1506 | /* NOTE: We could consider adding a comment field to the "din" file |
| 1507 | produced using type 3 markers (unknown access). This would then |
| 1508 | allow information about the program that the "din" is for, and |
| 1509 | the MIPs world that was being simulated, to be placed into the |
| 1510 | trace file. */ |
| 1511 | |
| 1512 | return; |
| 1513 | } |
| 1514 | #endif /* TRACE */ |
| 1515 | |
| 1516 | /*---------------------------------------------------------------------------*/ |
| 1517 | /*-- simulator engine -------------------------------------------------------*/ |
| 1518 | /*---------------------------------------------------------------------------*/ |
| 1519 | |
| 1520 | static void |
| 1521 | ColdReset (SIM_DESC sd) |
| 1522 | { |
| 1523 | int cpu_nr; |
| 1524 | for (cpu_nr = 0; cpu_nr < sim_engine_nr_cpus (sd); cpu_nr++) |
| 1525 | { |
| 1526 | sim_cpu *cpu = STATE_CPU (sd, cpu_nr); |
| 1527 | /* RESET: Fixed PC address: */ |
| 1528 | PC = UNSIGNED64 (0xFFFFFFFFBFC00000); |
| 1529 | /* The reset vector address is in the unmapped, uncached memory space. */ |
| 1530 | |
| 1531 | SR &= ~(status_SR | status_TS | status_RP); |
| 1532 | SR |= (status_ERL | status_BEV); |
| 1533 | |
| 1534 | /* Cheat and allow access to the complete register set immediately */ |
| 1535 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT |
| 1536 | && WITH_TARGET_WORD_BITSIZE == 64) |
| 1537 | SR |= status_FR; /* 64bit registers */ |
| 1538 | |
| 1539 | /* Ensure that any instructions with pending register updates are |
| 1540 | cleared: */ |
| 1541 | PENDING_INVALIDATE(); |
| 1542 | |
| 1543 | /* Initialise the FPU registers to the unknown state */ |
| 1544 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT) |
| 1545 | { |
| 1546 | int rn; |
| 1547 | for (rn = 0; (rn < 32); rn++) |
| 1548 | FPR_STATE[rn] = fmt_uninterpreted; |
| 1549 | } |
| 1550 | |
| 1551 | } |
| 1552 | } |
| 1553 | |
| 1554 | unsigned16 |
| 1555 | ifetch16 (SIM_DESC sd, |
| 1556 | sim_cpu *cpu, |
| 1557 | address_word cia, |
| 1558 | address_word vaddr) |
| 1559 | { |
| 1560 | /* Copy the action of the LW instruction */ |
| 1561 | address_word reverse = (ReverseEndian ? (LOADDRMASK >> 2) : 0); |
| 1562 | address_word bigend = (BigEndianCPU ? (LOADDRMASK >> 2) : 0); |
| 1563 | unsigned64 value; |
| 1564 | address_word paddr; |
| 1565 | unsigned16 instruction; |
| 1566 | unsigned byte; |
| 1567 | int cca; |
| 1568 | AddressTranslation (vaddr, isINSTRUCTION, isLOAD, &paddr, &cca, isTARGET, isREAL); |
| 1569 | paddr = ((paddr & ~LOADDRMASK) | ((paddr & LOADDRMASK) ^ (reverse << 2))); |
| 1570 | LoadMemory (&value, NULL, cca, AccessLength_WORD, paddr, vaddr, isINSTRUCTION, isREAL); |
| 1571 | byte = ((vaddr & LOADDRMASK) ^ (bigend << 2)); |
| 1572 | instruction = ((value >> (8 * byte)) & 0xFFFFFFFF); |
| 1573 | return instruction; |
| 1574 | } |
| 1575 | |
| 1576 | |
| 1577 | /* Description from page A-26 of the "MIPS IV Instruction Set" manual (revision 3.1) */ |
| 1578 | /* Signal an exception condition. This will result in an exception |
| 1579 | that aborts the instruction. The instruction operation pseudocode |
| 1580 | will never see a return from this function call. */ |
| 1581 | |
| 1582 | void |
| 1583 | signal_exception (SIM_DESC sd, |
| 1584 | sim_cpu *cpu, |
| 1585 | address_word cia, |
| 1586 | int exception,...) |
| 1587 | { |
| 1588 | int vector; |
| 1589 | |
| 1590 | #ifdef DEBUG |
| 1591 | sim_io_printf(sd,"DBG: SignalException(%d) PC = 0x%s\n",exception,pr_addr(cia)); |
| 1592 | #endif /* DEBUG */ |
| 1593 | |
| 1594 | /* Ensure that any active atomic read/modify/write operation will fail: */ |
| 1595 | LLBIT = 0; |
| 1596 | |
| 1597 | switch (exception) { |
| 1598 | /* TODO: For testing purposes I have been ignoring TRAPs. In |
| 1599 | reality we should either simulate them, or allow the user to |
| 1600 | ignore them at run-time. |
| 1601 | Same for SYSCALL */ |
| 1602 | case Trap : |
| 1603 | sim_io_eprintf(sd,"Ignoring instruction TRAP (PC 0x%s)\n",pr_addr(cia)); |
| 1604 | break; |
| 1605 | |
| 1606 | case SystemCall : |
| 1607 | { |
| 1608 | va_list ap; |
| 1609 | unsigned int instruction; |
| 1610 | unsigned int code; |
| 1611 | |
| 1612 | va_start(ap,exception); |
| 1613 | instruction = va_arg(ap,unsigned int); |
| 1614 | va_end(ap); |
| 1615 | |
| 1616 | code = (instruction >> 6) & 0xFFFFF; |
| 1617 | |
| 1618 | sim_io_eprintf(sd,"Ignoring instruction `syscall %d' (PC 0x%s)\n", |
| 1619 | code, pr_addr(cia)); |
| 1620 | } |
| 1621 | break; |
| 1622 | |
| 1623 | case DebugBreakPoint : |
| 1624 | if (! (Debug & Debug_DM)) |
| 1625 | { |
| 1626 | if (INDELAYSLOT()) |
| 1627 | { |
| 1628 | CANCELDELAYSLOT(); |
| 1629 | |
| 1630 | Debug |= Debug_DBD; /* signaled from within in delay slot */ |
| 1631 | DEPC = cia - 4; /* reference the branch instruction */ |
| 1632 | } |
| 1633 | else |
| 1634 | { |
| 1635 | Debug &= ~Debug_DBD; /* not signaled from within a delay slot */ |
| 1636 | DEPC = cia; |
| 1637 | } |
| 1638 | |
| 1639 | Debug |= Debug_DM; /* in debugging mode */ |
| 1640 | Debug |= Debug_DBp; /* raising a DBp exception */ |
| 1641 | PC = 0xBFC00200; |
| 1642 | sim_engine_restart (SD, CPU, NULL, NULL_CIA); |
| 1643 | } |
| 1644 | break; |
| 1645 | |
| 1646 | case ReservedInstruction : |
| 1647 | { |
| 1648 | va_list ap; |
| 1649 | unsigned int instruction; |
| 1650 | va_start(ap,exception); |
| 1651 | instruction = va_arg(ap,unsigned int); |
| 1652 | va_end(ap); |
| 1653 | /* Provide simple monitor support using ReservedInstruction |
| 1654 | exceptions. The following code simulates the fixed vector |
| 1655 | entry points into the IDT monitor by causing a simulator |
| 1656 | trap, performing the monitor operation, and returning to |
| 1657 | the address held in the $ra register (standard PCS return |
| 1658 | address). This means we only need to pre-load the vector |
| 1659 | space with suitable instruction values. For systems were |
| 1660 | actual trap instructions are used, we would not need to |
| 1661 | perform this magic. */ |
| 1662 | if ((instruction & RSVD_INSTRUCTION_MASK) == RSVD_INSTRUCTION) |
| 1663 | { |
| 1664 | sim_monitor (SD, CPU, cia, ((instruction >> RSVD_INSTRUCTION_ARG_SHIFT) & RSVD_INSTRUCTION_ARG_MASK) ); |
| 1665 | /* NOTE: This assumes that a branch-and-link style |
| 1666 | instruction was used to enter the vector (which is the |
| 1667 | case with the current IDT monitor). */ |
| 1668 | sim_engine_restart (SD, CPU, NULL, RA); |
| 1669 | } |
| 1670 | /* Look for the mips16 entry and exit instructions, and |
| 1671 | simulate a handler for them. */ |
| 1672 | else if ((cia & 1) != 0 |
| 1673 | && (instruction & 0xf81f) == 0xe809 |
| 1674 | && (instruction & 0x0c0) != 0x0c0) |
| 1675 | { |
| 1676 | mips16_entry (SD, CPU, cia, instruction); |
| 1677 | sim_engine_restart (sd, NULL, NULL, NULL_CIA); |
| 1678 | } |
| 1679 | /* else fall through to normal exception processing */ |
| 1680 | sim_io_eprintf(sd,"ReservedInstruction 0x%08X at PC = 0x%s\n",instruction,pr_addr(cia)); |
| 1681 | } |
| 1682 | |
| 1683 | case BreakPoint: |
| 1684 | #ifdef DEBUG |
| 1685 | sim_io_printf(sd,"DBG: SignalException(%d) PC = 0x%s\n",exception,pr_addr(cia)); |
| 1686 | #endif /* DEBUG */ |
| 1687 | /* Keep a copy of the current A0 in-case this is the program exit |
| 1688 | breakpoint: */ |
| 1689 | { |
| 1690 | va_list ap; |
| 1691 | unsigned int instruction; |
| 1692 | va_start(ap,exception); |
| 1693 | instruction = va_arg(ap,unsigned int); |
| 1694 | va_end(ap); |
| 1695 | /* Check for our special terminating BREAK: */ |
| 1696 | if ((instruction & 0x03FFFFC0) == 0x03ff0000) { |
| 1697 | sim_engine_halt (SD, CPU, NULL, cia, |
| 1698 | sim_exited, (unsigned int)(A0 & 0xFFFFFFFF)); |
| 1699 | } |
| 1700 | } |
| 1701 | if (STATE & simDELAYSLOT) |
| 1702 | PC = cia - 4; /* reference the branch instruction */ |
| 1703 | else |
| 1704 | PC = cia; |
| 1705 | sim_engine_halt (SD, CPU, NULL, cia, |
| 1706 | sim_stopped, SIM_SIGTRAP); |
| 1707 | |
| 1708 | default: |
| 1709 | /* Store exception code into current exception id variable (used |
| 1710 | by exit code): */ |
| 1711 | |
| 1712 | /* TODO: If not simulating exceptions then stop the simulator |
| 1713 | execution. At the moment we always stop the simulation. */ |
| 1714 | |
| 1715 | /* See figure 5-17 for an outline of the code below */ |
| 1716 | if (! (SR & status_EXL)) |
| 1717 | { |
| 1718 | CAUSE = (exception << 2); |
| 1719 | if (STATE & simDELAYSLOT) |
| 1720 | { |
| 1721 | STATE &= ~simDELAYSLOT; |
| 1722 | CAUSE |= cause_BD; |
| 1723 | EPC = (cia - 4); /* reference the branch instruction */ |
| 1724 | } |
| 1725 | else |
| 1726 | EPC = cia; |
| 1727 | /* FIXME: TLB et.al. */ |
| 1728 | vector = 0x180; |
| 1729 | } |
| 1730 | else |
| 1731 | { |
| 1732 | CAUSE = (exception << 2); |
| 1733 | vector = 0x180; |
| 1734 | } |
| 1735 | SR |= status_EXL; |
| 1736 | /* Store exception code into current exception id variable (used |
| 1737 | by exit code): */ |
| 1738 | if (SR & status_BEV) |
| 1739 | PC = (signed)0xBFC00200 + 0x180; |
| 1740 | else |
| 1741 | PC = (signed)0x80000000 + 0x180; |
| 1742 | |
| 1743 | switch ((CAUSE >> 2) & 0x1F) |
| 1744 | { |
| 1745 | case Interrupt: |
| 1746 | /* Interrupts arrive during event processing, no need to |
| 1747 | restart */ |
| 1748 | return; |
| 1749 | |
| 1750 | case TLBModification: |
| 1751 | case TLBLoad: |
| 1752 | case TLBStore: |
| 1753 | case AddressLoad: |
| 1754 | case AddressStore: |
| 1755 | case InstructionFetch: |
| 1756 | case DataReference: |
| 1757 | /* The following is so that the simulator will continue from the |
| 1758 | exception address on breakpoint operations. */ |
| 1759 | PC = EPC; |
| 1760 | sim_engine_halt (SD, CPU, NULL, NULL_CIA, |
| 1761 | sim_stopped, SIM_SIGBUS); |
| 1762 | |
| 1763 | case ReservedInstruction: |
| 1764 | case CoProcessorUnusable: |
| 1765 | PC = EPC; |
| 1766 | sim_engine_halt (SD, CPU, NULL, NULL_CIA, |
| 1767 | sim_stopped, SIM_SIGILL); |
| 1768 | |
| 1769 | case IntegerOverflow: |
| 1770 | case FPE: |
| 1771 | sim_engine_halt (SD, CPU, NULL, NULL_CIA, |
| 1772 | sim_stopped, SIM_SIGFPE); |
| 1773 | |
| 1774 | case Trap: |
| 1775 | case Watch: |
| 1776 | case SystemCall: |
| 1777 | PC = EPC; |
| 1778 | sim_engine_halt (SD, CPU, NULL, NULL_CIA, |
| 1779 | sim_stopped, SIM_SIGTRAP); |
| 1780 | |
| 1781 | case BreakPoint: |
| 1782 | PC = EPC; |
| 1783 | sim_engine_abort (SD, CPU, NULL_CIA, |
| 1784 | "FATAL: Should not encounter a breakpoint\n"); |
| 1785 | |
| 1786 | default : /* Unknown internal exception */ |
| 1787 | PC = EPC; |
| 1788 | sim_engine_halt (SD, CPU, NULL, NULL_CIA, |
| 1789 | sim_stopped, SIM_SIGABRT); |
| 1790 | |
| 1791 | } |
| 1792 | |
| 1793 | case SimulatorFault: |
| 1794 | { |
| 1795 | va_list ap; |
| 1796 | char *msg; |
| 1797 | va_start(ap,exception); |
| 1798 | msg = va_arg(ap,char *); |
| 1799 | va_end(ap); |
| 1800 | sim_engine_abort (SD, CPU, NULL_CIA, |
| 1801 | "FATAL: Simulator error \"%s\"\n",msg); |
| 1802 | } |
| 1803 | } |
| 1804 | |
| 1805 | return; |
| 1806 | } |
| 1807 | |
| 1808 | #if defined(WARN_RESULT) |
| 1809 | /* Description from page A-26 of the "MIPS IV Instruction Set" manual (revision 3.1) */ |
| 1810 | /* This function indicates that the result of the operation is |
| 1811 | undefined. However, this should not affect the instruction |
| 1812 | stream. All that is meant to happen is that the destination |
| 1813 | register is set to an undefined result. To keep the simulator |
| 1814 | simple, we just don't bother updating the destination register, so |
| 1815 | the overall result will be undefined. If desired we can stop the |
| 1816 | simulator by raising a pseudo-exception. */ |
| 1817 | #define UndefinedResult() undefined_result (sd,cia) |
| 1818 | static void |
| 1819 | undefined_result(sd,cia) |
| 1820 | SIM_DESC sd; |
| 1821 | address_word cia; |
| 1822 | { |
| 1823 | sim_io_eprintf(sd,"UndefinedResult: PC = 0x%s\n",pr_addr(cia)); |
| 1824 | #if 0 /* Disabled for the moment, since it actually happens a lot at the moment. */ |
| 1825 | state |= simSTOP; |
| 1826 | #endif |
| 1827 | return; |
| 1828 | } |
| 1829 | #endif /* WARN_RESULT */ |
| 1830 | |
| 1831 | /*-- FPU support routines ---------------------------------------------------*/ |
| 1832 | |
| 1833 | /* Numbers are held in normalized form. The SINGLE and DOUBLE binary |
| 1834 | formats conform to ANSI/IEEE Std 754-1985. */ |
| 1835 | /* SINGLE precision floating: |
| 1836 | * seeeeeeeefffffffffffffffffffffff |
| 1837 | * s = 1bit = sign |
| 1838 | * e = 8bits = exponent |
| 1839 | * f = 23bits = fraction |
| 1840 | */ |
| 1841 | /* SINGLE precision fixed: |
| 1842 | * siiiiiiiiiiiiiiiiiiiiiiiiiiiiiii |
| 1843 | * s = 1bit = sign |
| 1844 | * i = 31bits = integer |
| 1845 | */ |
| 1846 | /* DOUBLE precision floating: |
| 1847 | * seeeeeeeeeeeffffffffffffffffffffffffffffffffffffffffffffffffffff |
| 1848 | * s = 1bit = sign |
| 1849 | * e = 11bits = exponent |
| 1850 | * f = 52bits = fraction |
| 1851 | */ |
| 1852 | /* DOUBLE precision fixed: |
| 1853 | * siiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii |
| 1854 | * s = 1bit = sign |
| 1855 | * i = 63bits = integer |
| 1856 | */ |
| 1857 | |
| 1858 | /* Extract sign-bit: */ |
| 1859 | #define FP_S_s(v) (((v) & ((unsigned)1 << 31)) ? 1 : 0) |
| 1860 | #define FP_D_s(v) (((v) & ((uword64)1 << 63)) ? 1 : 0) |
| 1861 | /* Extract biased exponent: */ |
| 1862 | #define FP_S_be(v) (((v) >> 23) & 0xFF) |
| 1863 | #define FP_D_be(v) (((v) >> 52) & 0x7FF) |
| 1864 | /* Extract unbiased Exponent: */ |
| 1865 | #define FP_S_e(v) (FP_S_be(v) - 0x7F) |
| 1866 | #define FP_D_e(v) (FP_D_be(v) - 0x3FF) |
| 1867 | /* Extract complete fraction field: */ |
| 1868 | #define FP_S_f(v) ((v) & ~((unsigned)0x1FF << 23)) |
| 1869 | #define FP_D_f(v) ((v) & ~((uword64)0xFFF << 52)) |
| 1870 | /* Extract numbered fraction bit: */ |
| 1871 | #define FP_S_fb(b,v) (((v) & (1 << (23 - (b)))) ? 1 : 0) |
| 1872 | #define FP_D_fb(b,v) (((v) & (1 << (52 - (b)))) ? 1 : 0) |
| 1873 | |
| 1874 | /* Explicit QNaN values used when value required: */ |
| 1875 | #define FPQNaN_SINGLE (0x7FBFFFFF) |
| 1876 | #define FPQNaN_WORD (0x7FFFFFFF) |
| 1877 | #define FPQNaN_DOUBLE (((uword64)0x7FF7FFFF << 32) | 0xFFFFFFFF) |
| 1878 | #define FPQNaN_LONG (((uword64)0x7FFFFFFF << 32) | 0xFFFFFFFF) |
| 1879 | |
| 1880 | /* Explicit Infinity values used when required: */ |
| 1881 | #define FPINF_SINGLE (0x7F800000) |
| 1882 | #define FPINF_DOUBLE (((uword64)0x7FF00000 << 32) | 0x00000000) |
| 1883 | |
| 1884 | #if 1 /* def DEBUG */ |
| 1885 | #define RMMODE(v) (((v) == FP_RM_NEAREST) ? "Round" : (((v) == FP_RM_TOZERO) ? "Trunc" : (((v) == FP_RM_TOPINF) ? "Ceil" : "Floor"))) |
| 1886 | #define DOFMT(v) (((v) == fmt_single) ? "single" : (((v) == fmt_double) ? "double" : (((v) == fmt_word) ? "word" : (((v) == fmt_long) ? "long" : (((v) == fmt_unknown) ? "<unknown>" : (((v) == fmt_uninterpreted) ? "<uninterpreted>" : "<format error>")))))) |
| 1887 | #endif /* DEBUG */ |
| 1888 | |
| 1889 | uword64 |
| 1890 | value_fpr (SIM_DESC sd, |
| 1891 | sim_cpu *cpu, |
| 1892 | address_word cia, |
| 1893 | int fpr, |
| 1894 | FP_formats fmt) |
| 1895 | { |
| 1896 | uword64 value = 0; |
| 1897 | int err = 0; |
| 1898 | |
| 1899 | /* Treat unused register values, as fixed-point 64bit values: */ |
| 1900 | if ((fmt == fmt_uninterpreted) || (fmt == fmt_unknown)) |
| 1901 | #if 1 |
| 1902 | /* If request to read data as "uninterpreted", then use the current |
| 1903 | encoding: */ |
| 1904 | fmt = FPR_STATE[fpr]; |
| 1905 | #else |
| 1906 | fmt = fmt_long; |
| 1907 | #endif |
| 1908 | |
| 1909 | /* For values not yet accessed, set to the desired format: */ |
| 1910 | if (FPR_STATE[fpr] == fmt_uninterpreted) { |
| 1911 | FPR_STATE[fpr] = fmt; |
| 1912 | #ifdef DEBUG |
| 1913 | printf("DBG: Register %d was fmt_uninterpreted. Now %s\n",fpr,DOFMT(fmt)); |
| 1914 | #endif /* DEBUG */ |
| 1915 | } |
| 1916 | if (fmt != FPR_STATE[fpr]) { |
| 1917 | sim_io_eprintf(sd,"FPR %d (format %s) being accessed with format %s - setting to unknown (PC = 0x%s)\n",fpr,DOFMT(FPR_STATE[fpr]),DOFMT(fmt),pr_addr(cia)); |
| 1918 | FPR_STATE[fpr] = fmt_unknown; |
| 1919 | } |
| 1920 | |
| 1921 | if (FPR_STATE[fpr] == fmt_unknown) { |
| 1922 | /* Set QNaN value: */ |
| 1923 | switch (fmt) { |
| 1924 | case fmt_single: |
| 1925 | value = FPQNaN_SINGLE; |
| 1926 | break; |
| 1927 | |
| 1928 | case fmt_double: |
| 1929 | value = FPQNaN_DOUBLE; |
| 1930 | break; |
| 1931 | |
| 1932 | case fmt_word: |
| 1933 | value = FPQNaN_WORD; |
| 1934 | break; |
| 1935 | |
| 1936 | case fmt_long: |
| 1937 | value = FPQNaN_LONG; |
| 1938 | break; |
| 1939 | |
| 1940 | default: |
| 1941 | err = -1; |
| 1942 | break; |
| 1943 | } |
| 1944 | } else if (SizeFGR() == 64) { |
| 1945 | switch (fmt) { |
| 1946 | case fmt_single: |
| 1947 | case fmt_word: |
| 1948 | value = (FGR[fpr] & 0xFFFFFFFF); |
| 1949 | break; |
| 1950 | |
| 1951 | case fmt_uninterpreted: |
| 1952 | case fmt_double: |
| 1953 | case fmt_long: |
| 1954 | value = FGR[fpr]; |
| 1955 | break; |
| 1956 | |
| 1957 | default : |
| 1958 | err = -1; |
| 1959 | break; |
| 1960 | } |
| 1961 | } else { |
| 1962 | switch (fmt) { |
| 1963 | case fmt_single: |
| 1964 | case fmt_word: |
| 1965 | value = (FGR[fpr] & 0xFFFFFFFF); |
| 1966 | break; |
| 1967 | |
| 1968 | case fmt_uninterpreted: |
| 1969 | case fmt_double: |
| 1970 | case fmt_long: |
| 1971 | if ((fpr & 1) == 0) { /* even registers only */ |
| 1972 | value = ((((uword64)FGR[fpr+1]) << 32) | (FGR[fpr] & 0xFFFFFFFF)); |
| 1973 | } else { |
| 1974 | SignalException(ReservedInstruction,0); |
| 1975 | } |
| 1976 | break; |
| 1977 | |
| 1978 | default : |
| 1979 | err = -1; |
| 1980 | break; |
| 1981 | } |
| 1982 | } |
| 1983 | |
| 1984 | if (err) |
| 1985 | SignalExceptionSimulatorFault ("Unrecognised FP format in ValueFPR()"); |
| 1986 | |
| 1987 | #ifdef DEBUG |
| 1988 | printf("DBG: ValueFPR: fpr = %d, fmt = %s, value = 0x%s : PC = 0x%s : SizeFGR() = %d\n",fpr,DOFMT(fmt),pr_addr(value),pr_addr(cia),SizeFGR()); |
| 1989 | #endif /* DEBUG */ |
| 1990 | |
| 1991 | return(value); |
| 1992 | } |
| 1993 | |
| 1994 | void |
| 1995 | store_fpr (SIM_DESC sd, |
| 1996 | sim_cpu *cpu, |
| 1997 | address_word cia, |
| 1998 | int fpr, |
| 1999 | FP_formats fmt, |
| 2000 | uword64 value) |
| 2001 | { |
| 2002 | int err = 0; |
| 2003 | |
| 2004 | #ifdef DEBUG |
| 2005 | printf("DBG: StoreFPR: fpr = %d, fmt = %s, value = 0x%s : PC = 0x%s : SizeFGR() = %d\n",fpr,DOFMT(fmt),pr_addr(value),pr_addr(cia),SizeFGR()); |
| 2006 | #endif /* DEBUG */ |
| 2007 | |
| 2008 | if (SizeFGR() == 64) { |
| 2009 | switch (fmt) { |
| 2010 | case fmt_uninterpreted_32: |
| 2011 | fmt = fmt_uninterpreted; |
| 2012 | case fmt_single : |
| 2013 | case fmt_word : |
| 2014 | FGR[fpr] = (((uword64)0xDEADC0DE << 32) | (value & 0xFFFFFFFF)); |
| 2015 | FPR_STATE[fpr] = fmt; |
| 2016 | break; |
| 2017 | |
| 2018 | case fmt_uninterpreted_64: |
| 2019 | fmt = fmt_uninterpreted; |
| 2020 | case fmt_uninterpreted: |
| 2021 | case fmt_double : |
| 2022 | case fmt_long : |
| 2023 | FGR[fpr] = value; |
| 2024 | FPR_STATE[fpr] = fmt; |
| 2025 | break; |
| 2026 | |
| 2027 | default : |
| 2028 | FPR_STATE[fpr] = fmt_unknown; |
| 2029 | err = -1; |
| 2030 | break; |
| 2031 | } |
| 2032 | } else { |
| 2033 | switch (fmt) { |
| 2034 | case fmt_uninterpreted_32: |
| 2035 | fmt = fmt_uninterpreted; |
| 2036 | case fmt_single : |
| 2037 | case fmt_word : |
| 2038 | FGR[fpr] = (value & 0xFFFFFFFF); |
| 2039 | FPR_STATE[fpr] = fmt; |
| 2040 | break; |
| 2041 | |
| 2042 | case fmt_uninterpreted_64: |
| 2043 | fmt = fmt_uninterpreted; |
| 2044 | case fmt_uninterpreted: |
| 2045 | case fmt_double : |
| 2046 | case fmt_long : |
| 2047 | if ((fpr & 1) == 0) { /* even register number only */ |
| 2048 | FGR[fpr+1] = (value >> 32); |
| 2049 | FGR[fpr] = (value & 0xFFFFFFFF); |
| 2050 | FPR_STATE[fpr + 1] = fmt; |
| 2051 | FPR_STATE[fpr] = fmt; |
| 2052 | } else { |
| 2053 | FPR_STATE[fpr] = fmt_unknown; |
| 2054 | FPR_STATE[fpr + 1] = fmt_unknown; |
| 2055 | SignalException(ReservedInstruction,0); |
| 2056 | } |
| 2057 | break; |
| 2058 | |
| 2059 | default : |
| 2060 | FPR_STATE[fpr] = fmt_unknown; |
| 2061 | err = -1; |
| 2062 | break; |
| 2063 | } |
| 2064 | } |
| 2065 | #if defined(WARN_RESULT) |
| 2066 | else |
| 2067 | UndefinedResult(); |
| 2068 | #endif /* WARN_RESULT */ |
| 2069 | |
| 2070 | if (err) |
| 2071 | SignalExceptionSimulatorFault ("Unrecognised FP format in StoreFPR()"); |
| 2072 | |
| 2073 | #ifdef DEBUG |
| 2074 | printf("DBG: StoreFPR: fpr[%d] = 0x%s (format %s)\n",fpr,pr_addr(FGR[fpr]),DOFMT(fmt)); |
| 2075 | #endif /* DEBUG */ |
| 2076 | |
| 2077 | return; |
| 2078 | } |
| 2079 | |
| 2080 | int |
| 2081 | NaN(op,fmt) |
| 2082 | uword64 op; |
| 2083 | FP_formats fmt; |
| 2084 | { |
| 2085 | int boolean = 0; |
| 2086 | switch (fmt) { |
| 2087 | case fmt_single: |
| 2088 | case fmt_word: |
| 2089 | { |
| 2090 | sim_fpu wop; |
| 2091 | sim_fpu_32to (&wop, op); |
| 2092 | boolean = sim_fpu_is_nan (&wop); |
| 2093 | break; |
| 2094 | } |
| 2095 | case fmt_double: |
| 2096 | case fmt_long: |
| 2097 | { |
| 2098 | sim_fpu wop; |
| 2099 | sim_fpu_64to (&wop, op); |
| 2100 | boolean = sim_fpu_is_nan (&wop); |
| 2101 | break; |
| 2102 | } |
| 2103 | default: |
| 2104 | fprintf (stderr, "Bad switch\n"); |
| 2105 | abort (); |
| 2106 | } |
| 2107 | |
| 2108 | #ifdef DEBUG |
| 2109 | printf("DBG: NaN: returning %d for 0x%s (format = %s)\n",boolean,pr_addr(op),DOFMT(fmt)); |
| 2110 | #endif /* DEBUG */ |
| 2111 | |
| 2112 | return(boolean); |
| 2113 | } |
| 2114 | |
| 2115 | int |
| 2116 | Infinity(op,fmt) |
| 2117 | uword64 op; |
| 2118 | FP_formats fmt; |
| 2119 | { |
| 2120 | int boolean = 0; |
| 2121 | |
| 2122 | #ifdef DEBUG |
| 2123 | printf("DBG: Infinity: format %s 0x%s\n",DOFMT(fmt),pr_addr(op)); |
| 2124 | #endif /* DEBUG */ |
| 2125 | |
| 2126 | switch (fmt) { |
| 2127 | case fmt_single: |
| 2128 | { |
| 2129 | sim_fpu wop; |
| 2130 | sim_fpu_32to (&wop, op); |
| 2131 | boolean = sim_fpu_is_infinity (&wop); |
| 2132 | break; |
| 2133 | } |
| 2134 | case fmt_double: |
| 2135 | { |
| 2136 | sim_fpu wop; |
| 2137 | sim_fpu_64to (&wop, op); |
| 2138 | boolean = sim_fpu_is_infinity (&wop); |
| 2139 | break; |
| 2140 | } |
| 2141 | default: |
| 2142 | printf("DBG: TODO: unrecognised format (%s) for Infinity check\n",DOFMT(fmt)); |
| 2143 | break; |
| 2144 | } |
| 2145 | |
| 2146 | #ifdef DEBUG |
| 2147 | printf("DBG: Infinity: returning %d for 0x%s (format = %s)\n",boolean,pr_addr(op),DOFMT(fmt)); |
| 2148 | #endif /* DEBUG */ |
| 2149 | |
| 2150 | return(boolean); |
| 2151 | } |
| 2152 | |
| 2153 | int |
| 2154 | Less(op1,op2,fmt) |
| 2155 | uword64 op1; |
| 2156 | uword64 op2; |
| 2157 | FP_formats fmt; |
| 2158 | { |
| 2159 | int boolean = 0; |
| 2160 | |
| 2161 | /* Argument checking already performed by the FPCOMPARE code */ |
| 2162 | |
| 2163 | #ifdef DEBUG |
| 2164 | printf("DBG: Less: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); |
| 2165 | #endif /* DEBUG */ |
| 2166 | |
| 2167 | /* The format type should already have been checked: */ |
| 2168 | switch (fmt) { |
| 2169 | case fmt_single: |
| 2170 | { |
| 2171 | sim_fpu wop1; |
| 2172 | sim_fpu wop2; |
| 2173 | sim_fpu_32to (&wop1, op1); |
| 2174 | sim_fpu_32to (&wop2, op2); |
| 2175 | boolean = sim_fpu_is_lt (&wop1, &wop2); |
| 2176 | break; |
| 2177 | } |
| 2178 | case fmt_double: |
| 2179 | { |
| 2180 | sim_fpu wop1; |
| 2181 | sim_fpu wop2; |
| 2182 | sim_fpu_64to (&wop1, op1); |
| 2183 | sim_fpu_64to (&wop2, op2); |
| 2184 | boolean = sim_fpu_is_lt (&wop1, &wop2); |
| 2185 | break; |
| 2186 | } |
| 2187 | default: |
| 2188 | fprintf (stderr, "Bad switch\n"); |
| 2189 | abort (); |
| 2190 | } |
| 2191 | |
| 2192 | #ifdef DEBUG |
| 2193 | printf("DBG: Less: returning %d (format = %s)\n",boolean,DOFMT(fmt)); |
| 2194 | #endif /* DEBUG */ |
| 2195 | |
| 2196 | return(boolean); |
| 2197 | } |
| 2198 | |
| 2199 | int |
| 2200 | Equal(op1,op2,fmt) |
| 2201 | uword64 op1; |
| 2202 | uword64 op2; |
| 2203 | FP_formats fmt; |
| 2204 | { |
| 2205 | int boolean = 0; |
| 2206 | |
| 2207 | /* Argument checking already performed by the FPCOMPARE code */ |
| 2208 | |
| 2209 | #ifdef DEBUG |
| 2210 | printf("DBG: Equal: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); |
| 2211 | #endif /* DEBUG */ |
| 2212 | |
| 2213 | /* The format type should already have been checked: */ |
| 2214 | switch (fmt) { |
| 2215 | case fmt_single: |
| 2216 | { |
| 2217 | sim_fpu wop1; |
| 2218 | sim_fpu wop2; |
| 2219 | sim_fpu_32to (&wop1, op1); |
| 2220 | sim_fpu_32to (&wop2, op2); |
| 2221 | boolean = sim_fpu_is_eq (&wop1, &wop2); |
| 2222 | break; |
| 2223 | } |
| 2224 | case fmt_double: |
| 2225 | { |
| 2226 | sim_fpu wop1; |
| 2227 | sim_fpu wop2; |
| 2228 | sim_fpu_64to (&wop1, op1); |
| 2229 | sim_fpu_64to (&wop2, op2); |
| 2230 | boolean = sim_fpu_is_eq (&wop1, &wop2); |
| 2231 | break; |
| 2232 | } |
| 2233 | default: |
| 2234 | fprintf (stderr, "Bad switch\n"); |
| 2235 | abort (); |
| 2236 | } |
| 2237 | |
| 2238 | #ifdef DEBUG |
| 2239 | printf("DBG: Equal: returning %d (format = %s)\n",boolean,DOFMT(fmt)); |
| 2240 | #endif /* DEBUG */ |
| 2241 | |
| 2242 | return(boolean); |
| 2243 | } |
| 2244 | |
| 2245 | uword64 |
| 2246 | AbsoluteValue(op,fmt) |
| 2247 | uword64 op; |
| 2248 | FP_formats fmt; |
| 2249 | { |
| 2250 | uword64 result = 0; |
| 2251 | |
| 2252 | #ifdef DEBUG |
| 2253 | printf("DBG: AbsoluteValue: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op)); |
| 2254 | #endif /* DEBUG */ |
| 2255 | |
| 2256 | /* The format type should already have been checked: */ |
| 2257 | switch (fmt) { |
| 2258 | case fmt_single: |
| 2259 | { |
| 2260 | sim_fpu wop; |
| 2261 | unsigned32 ans; |
| 2262 | sim_fpu_32to (&wop, op); |
| 2263 | sim_fpu_abs (&wop, &wop); |
| 2264 | sim_fpu_to32 (&ans, &wop); |
| 2265 | result = ans; |
| 2266 | break; |
| 2267 | } |
| 2268 | case fmt_double: |
| 2269 | { |
| 2270 | sim_fpu wop; |
| 2271 | unsigned64 ans; |
| 2272 | sim_fpu_64to (&wop, op); |
| 2273 | sim_fpu_abs (&wop, &wop); |
| 2274 | sim_fpu_to64 (&ans, &wop); |
| 2275 | result = ans; |
| 2276 | break; |
| 2277 | } |
| 2278 | default: |
| 2279 | fprintf (stderr, "Bad switch\n"); |
| 2280 | abort (); |
| 2281 | } |
| 2282 | |
| 2283 | return(result); |
| 2284 | } |
| 2285 | |
| 2286 | uword64 |
| 2287 | Negate(op,fmt) |
| 2288 | uword64 op; |
| 2289 | FP_formats fmt; |
| 2290 | { |
| 2291 | uword64 result = 0; |
| 2292 | |
| 2293 | #ifdef DEBUG |
| 2294 | printf("DBG: Negate: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op)); |
| 2295 | #endif /* DEBUG */ |
| 2296 | |
| 2297 | /* The format type should already have been checked: */ |
| 2298 | switch (fmt) { |
| 2299 | case fmt_single: |
| 2300 | { |
| 2301 | sim_fpu wop; |
| 2302 | unsigned32 ans; |
| 2303 | sim_fpu_32to (&wop, op); |
| 2304 | sim_fpu_neg (&wop, &wop); |
| 2305 | sim_fpu_to32 (&ans, &wop); |
| 2306 | result = ans; |
| 2307 | break; |
| 2308 | } |
| 2309 | case fmt_double: |
| 2310 | { |
| 2311 | sim_fpu wop; |
| 2312 | unsigned64 ans; |
| 2313 | sim_fpu_64to (&wop, op); |
| 2314 | sim_fpu_neg (&wop, &wop); |
| 2315 | sim_fpu_to64 (&ans, &wop); |
| 2316 | result = ans; |
| 2317 | break; |
| 2318 | } |
| 2319 | default: |
| 2320 | fprintf (stderr, "Bad switch\n"); |
| 2321 | abort (); |
| 2322 | } |
| 2323 | |
| 2324 | return(result); |
| 2325 | } |
| 2326 | |
| 2327 | uword64 |
| 2328 | Add(op1,op2,fmt) |
| 2329 | uword64 op1; |
| 2330 | uword64 op2; |
| 2331 | FP_formats fmt; |
| 2332 | { |
| 2333 | uword64 result = 0; |
| 2334 | |
| 2335 | #ifdef DEBUG |
| 2336 | printf("DBG: Add: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); |
| 2337 | #endif /* DEBUG */ |
| 2338 | |
| 2339 | /* The registers must specify FPRs valid for operands of type |
| 2340 | "fmt". If they are not valid, the result is undefined. */ |
| 2341 | |
| 2342 | /* The format type should already have been checked: */ |
| 2343 | switch (fmt) { |
| 2344 | case fmt_single: |
| 2345 | { |
| 2346 | sim_fpu wop1; |
| 2347 | sim_fpu wop2; |
| 2348 | sim_fpu ans; |
| 2349 | unsigned32 res; |
| 2350 | sim_fpu_32to (&wop1, op1); |
| 2351 | sim_fpu_32to (&wop2, op2); |
| 2352 | sim_fpu_add (&ans, &wop1, &wop2); |
| 2353 | sim_fpu_to32 (&res, &ans); |
| 2354 | result = res; |
| 2355 | break; |
| 2356 | } |
| 2357 | case fmt_double: |
| 2358 | { |
| 2359 | sim_fpu wop1; |
| 2360 | sim_fpu wop2; |
| 2361 | sim_fpu ans; |
| 2362 | unsigned64 res; |
| 2363 | sim_fpu_64to (&wop1, op1); |
| 2364 | sim_fpu_64to (&wop2, op2); |
| 2365 | sim_fpu_add (&ans, &wop1, &wop2); |
| 2366 | sim_fpu_to64 (&res, &ans); |
| 2367 | result = res; |
| 2368 | break; |
| 2369 | } |
| 2370 | default: |
| 2371 | fprintf (stderr, "Bad switch\n"); |
| 2372 | abort (); |
| 2373 | } |
| 2374 | |
| 2375 | #ifdef DEBUG |
| 2376 | printf("DBG: Add: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); |
| 2377 | #endif /* DEBUG */ |
| 2378 | |
| 2379 | return(result); |
| 2380 | } |
| 2381 | |
| 2382 | uword64 |
| 2383 | Sub(op1,op2,fmt) |
| 2384 | uword64 op1; |
| 2385 | uword64 op2; |
| 2386 | FP_formats fmt; |
| 2387 | { |
| 2388 | uword64 result = 0; |
| 2389 | |
| 2390 | #ifdef DEBUG |
| 2391 | printf("DBG: Sub: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); |
| 2392 | #endif /* DEBUG */ |
| 2393 | |
| 2394 | /* The registers must specify FPRs valid for operands of type |
| 2395 | "fmt". If they are not valid, the result is undefined. */ |
| 2396 | |
| 2397 | /* The format type should already have been checked: */ |
| 2398 | switch (fmt) { |
| 2399 | case fmt_single: |
| 2400 | { |
| 2401 | sim_fpu wop1; |
| 2402 | sim_fpu wop2; |
| 2403 | sim_fpu ans; |
| 2404 | unsigned32 res; |
| 2405 | sim_fpu_32to (&wop1, op1); |
| 2406 | sim_fpu_32to (&wop2, op2); |
| 2407 | sim_fpu_sub (&ans, &wop1, &wop2); |
| 2408 | sim_fpu_to32 (&res, &ans); |
| 2409 | result = res; |
| 2410 | } |
| 2411 | break; |
| 2412 | case fmt_double: |
| 2413 | { |
| 2414 | sim_fpu wop1; |
| 2415 | sim_fpu wop2; |
| 2416 | sim_fpu ans; |
| 2417 | unsigned64 res; |
| 2418 | sim_fpu_64to (&wop1, op1); |
| 2419 | sim_fpu_64to (&wop2, op2); |
| 2420 | sim_fpu_sub (&ans, &wop1, &wop2); |
| 2421 | sim_fpu_to64 (&res, &ans); |
| 2422 | result = res; |
| 2423 | } |
| 2424 | break; |
| 2425 | default: |
| 2426 | fprintf (stderr, "Bad switch\n"); |
| 2427 | abort (); |
| 2428 | } |
| 2429 | |
| 2430 | #ifdef DEBUG |
| 2431 | printf("DBG: Sub: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); |
| 2432 | #endif /* DEBUG */ |
| 2433 | |
| 2434 | return(result); |
| 2435 | } |
| 2436 | |
| 2437 | uword64 |
| 2438 | Multiply(op1,op2,fmt) |
| 2439 | uword64 op1; |
| 2440 | uword64 op2; |
| 2441 | FP_formats fmt; |
| 2442 | { |
| 2443 | uword64 result = 0; |
| 2444 | |
| 2445 | #ifdef DEBUG |
| 2446 | printf("DBG: Multiply: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); |
| 2447 | #endif /* DEBUG */ |
| 2448 | |
| 2449 | /* The registers must specify FPRs valid for operands of type |
| 2450 | "fmt". If they are not valid, the result is undefined. */ |
| 2451 | |
| 2452 | /* The format type should already have been checked: */ |
| 2453 | switch (fmt) { |
| 2454 | case fmt_single: |
| 2455 | { |
| 2456 | sim_fpu wop1; |
| 2457 | sim_fpu wop2; |
| 2458 | sim_fpu ans; |
| 2459 | unsigned32 res; |
| 2460 | sim_fpu_32to (&wop1, op1); |
| 2461 | sim_fpu_32to (&wop2, op2); |
| 2462 | sim_fpu_mul (&ans, &wop1, &wop2); |
| 2463 | sim_fpu_to32 (&res, &ans); |
| 2464 | result = res; |
| 2465 | break; |
| 2466 | } |
| 2467 | case fmt_double: |
| 2468 | { |
| 2469 | sim_fpu wop1; |
| 2470 | sim_fpu wop2; |
| 2471 | sim_fpu ans; |
| 2472 | unsigned64 res; |
| 2473 | sim_fpu_64to (&wop1, op1); |
| 2474 | sim_fpu_64to (&wop2, op2); |
| 2475 | sim_fpu_mul (&ans, &wop1, &wop2); |
| 2476 | sim_fpu_to64 (&res, &ans); |
| 2477 | result = res; |
| 2478 | break; |
| 2479 | } |
| 2480 | default: |
| 2481 | fprintf (stderr, "Bad switch\n"); |
| 2482 | abort (); |
| 2483 | } |
| 2484 | |
| 2485 | #ifdef DEBUG |
| 2486 | printf("DBG: Multiply: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); |
| 2487 | #endif /* DEBUG */ |
| 2488 | |
| 2489 | return(result); |
| 2490 | } |
| 2491 | |
| 2492 | uword64 |
| 2493 | Divide(op1,op2,fmt) |
| 2494 | uword64 op1; |
| 2495 | uword64 op2; |
| 2496 | FP_formats fmt; |
| 2497 | { |
| 2498 | uword64 result = 0; |
| 2499 | |
| 2500 | #ifdef DEBUG |
| 2501 | printf("DBG: Divide: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); |
| 2502 | #endif /* DEBUG */ |
| 2503 | |
| 2504 | /* The registers must specify FPRs valid for operands of type |
| 2505 | "fmt". If they are not valid, the result is undefined. */ |
| 2506 | |
| 2507 | /* The format type should already have been checked: */ |
| 2508 | switch (fmt) { |
| 2509 | case fmt_single: |
| 2510 | { |
| 2511 | sim_fpu wop1; |
| 2512 | sim_fpu wop2; |
| 2513 | sim_fpu ans; |
| 2514 | unsigned32 res; |
| 2515 | sim_fpu_32to (&wop1, op1); |
| 2516 | sim_fpu_32to (&wop2, op2); |
| 2517 | sim_fpu_div (&ans, &wop1, &wop2); |
| 2518 | sim_fpu_to32 (&res, &ans); |
| 2519 | result = res; |
| 2520 | break; |
| 2521 | } |
| 2522 | case fmt_double: |
| 2523 | { |
| 2524 | sim_fpu wop1; |
| 2525 | sim_fpu wop2; |
| 2526 | sim_fpu ans; |
| 2527 | unsigned64 res; |
| 2528 | sim_fpu_64to (&wop1, op1); |
| 2529 | sim_fpu_64to (&wop2, op2); |
| 2530 | sim_fpu_div (&ans, &wop1, &wop2); |
| 2531 | sim_fpu_to64 (&res, &ans); |
| 2532 | result = res; |
| 2533 | break; |
| 2534 | } |
| 2535 | default: |
| 2536 | fprintf (stderr, "Bad switch\n"); |
| 2537 | abort (); |
| 2538 | } |
| 2539 | |
| 2540 | #ifdef DEBUG |
| 2541 | printf("DBG: Divide: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); |
| 2542 | #endif /* DEBUG */ |
| 2543 | |
| 2544 | return(result); |
| 2545 | } |
| 2546 | |
| 2547 | uword64 UNUSED |
| 2548 | Recip(op,fmt) |
| 2549 | uword64 op; |
| 2550 | FP_formats fmt; |
| 2551 | { |
| 2552 | uword64 result = 0; |
| 2553 | |
| 2554 | #ifdef DEBUG |
| 2555 | printf("DBG: Recip: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op)); |
| 2556 | #endif /* DEBUG */ |
| 2557 | |
| 2558 | /* The registers must specify FPRs valid for operands of type |
| 2559 | "fmt". If they are not valid, the result is undefined. */ |
| 2560 | |
| 2561 | /* The format type should already have been checked: */ |
| 2562 | switch (fmt) { |
| 2563 | case fmt_single: |
| 2564 | { |
| 2565 | sim_fpu wop; |
| 2566 | sim_fpu ans; |
| 2567 | unsigned32 res; |
| 2568 | sim_fpu_32to (&wop, op); |
| 2569 | sim_fpu_inv (&ans, &wop); |
| 2570 | sim_fpu_to32 (&res, &ans); |
| 2571 | result = res; |
| 2572 | break; |
| 2573 | } |
| 2574 | case fmt_double: |
| 2575 | { |
| 2576 | sim_fpu wop; |
| 2577 | sim_fpu ans; |
| 2578 | unsigned64 res; |
| 2579 | sim_fpu_64to (&wop, op); |
| 2580 | sim_fpu_inv (&ans, &wop); |
| 2581 | sim_fpu_to64 (&res, &ans); |
| 2582 | result = res; |
| 2583 | break; |
| 2584 | } |
| 2585 | default: |
| 2586 | fprintf (stderr, "Bad switch\n"); |
| 2587 | abort (); |
| 2588 | } |
| 2589 | |
| 2590 | #ifdef DEBUG |
| 2591 | printf("DBG: Recip: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); |
| 2592 | #endif /* DEBUG */ |
| 2593 | |
| 2594 | return(result); |
| 2595 | } |
| 2596 | |
| 2597 | uword64 |
| 2598 | SquareRoot(op,fmt) |
| 2599 | uword64 op; |
| 2600 | FP_formats fmt; |
| 2601 | { |
| 2602 | uword64 result = 0; |
| 2603 | |
| 2604 | #ifdef DEBUG |
| 2605 | printf("DBG: SquareRoot: %s: op = 0x%s\n",DOFMT(fmt),pr_addr(op)); |
| 2606 | #endif /* DEBUG */ |
| 2607 | |
| 2608 | /* The registers must specify FPRs valid for operands of type |
| 2609 | "fmt". If they are not valid, the result is undefined. */ |
| 2610 | |
| 2611 | /* The format type should already have been checked: */ |
| 2612 | switch (fmt) { |
| 2613 | case fmt_single: |
| 2614 | { |
| 2615 | sim_fpu wop; |
| 2616 | sim_fpu ans; |
| 2617 | unsigned32 res; |
| 2618 | sim_fpu_32to (&wop, op); |
| 2619 | sim_fpu_sqrt (&ans, &wop); |
| 2620 | sim_fpu_to32 (&res, &ans); |
| 2621 | result = res; |
| 2622 | break; |
| 2623 | } |
| 2624 | case fmt_double: |
| 2625 | { |
| 2626 | sim_fpu wop; |
| 2627 | sim_fpu ans; |
| 2628 | unsigned64 res; |
| 2629 | sim_fpu_64to (&wop, op); |
| 2630 | sim_fpu_sqrt (&ans, &wop); |
| 2631 | sim_fpu_to64 (&res, &ans); |
| 2632 | result = res; |
| 2633 | break; |
| 2634 | } |
| 2635 | default: |
| 2636 | fprintf (stderr, "Bad switch\n"); |
| 2637 | abort (); |
| 2638 | } |
| 2639 | |
| 2640 | #ifdef DEBUG |
| 2641 | printf("DBG: SquareRoot: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); |
| 2642 | #endif /* DEBUG */ |
| 2643 | |
| 2644 | return(result); |
| 2645 | } |
| 2646 | |
| 2647 | #if 0 |
| 2648 | uword64 |
| 2649 | Max (uword64 op1, |
| 2650 | uword64 op2, |
| 2651 | FP_formats fmt) |
| 2652 | { |
| 2653 | int cmp; |
| 2654 | unsigned64 result; |
| 2655 | |
| 2656 | #ifdef DEBUG |
| 2657 | printf("DBG: Max: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); |
| 2658 | #endif /* DEBUG */ |
| 2659 | |
| 2660 | /* The registers must specify FPRs valid for operands of type |
| 2661 | "fmt". If they are not valid, the result is undefined. */ |
| 2662 | |
| 2663 | /* The format type should already have been checked: */ |
| 2664 | switch (fmt) |
| 2665 | { |
| 2666 | case fmt_single: |
| 2667 | { |
| 2668 | sim_fpu wop1; |
| 2669 | sim_fpu wop2; |
| 2670 | sim_fpu_32to (&wop1, op1); |
| 2671 | sim_fpu_32to (&wop2, op2); |
| 2672 | cmp = sim_fpu_cmp (&wop1, &wop2); |
| 2673 | break; |
| 2674 | } |
| 2675 | case fmt_double: |
| 2676 | { |
| 2677 | sim_fpu wop1; |
| 2678 | sim_fpu wop2; |
| 2679 | sim_fpu_64to (&wop1, op1); |
| 2680 | sim_fpu_64to (&wop2, op2); |
| 2681 | cmp = sim_fpu_cmp (&wop1, &wop2); |
| 2682 | break; |
| 2683 | } |
| 2684 | default: |
| 2685 | fprintf (stderr, "Bad switch\n"); |
| 2686 | abort (); |
| 2687 | } |
| 2688 | |
| 2689 | switch (cmp) |
| 2690 | { |
| 2691 | case SIM_FPU_IS_SNAN: |
| 2692 | case SIM_FPU_IS_QNAN: |
| 2693 | result = op1; |
| 2694 | case SIM_FPU_IS_NINF: |
| 2695 | case SIM_FPU_IS_NNUMBER: |
| 2696 | case SIM_FPU_IS_NDENORM: |
| 2697 | case SIM_FPU_IS_NZERO: |
| 2698 | result = op2; /* op1 - op2 < 0 */ |
| 2699 | case SIM_FPU_IS_PINF: |
| 2700 | case SIM_FPU_IS_PNUMBER: |
| 2701 | case SIM_FPU_IS_PDENORM: |
| 2702 | case SIM_FPU_IS_PZERO: |
| 2703 | result = op1; /* op1 - op2 > 0 */ |
| 2704 | default: |
| 2705 | fprintf (stderr, "Bad switch\n"); |
| 2706 | abort (); |
| 2707 | } |
| 2708 | |
| 2709 | #ifdef DEBUG |
| 2710 | printf("DBG: Max: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); |
| 2711 | #endif /* DEBUG */ |
| 2712 | |
| 2713 | return(result); |
| 2714 | } |
| 2715 | #endif |
| 2716 | |
| 2717 | #if 0 |
| 2718 | uword64 |
| 2719 | Min (uword64 op1, |
| 2720 | uword64 op2, |
| 2721 | FP_formats fmt) |
| 2722 | { |
| 2723 | int cmp; |
| 2724 | unsigned64 result; |
| 2725 | |
| 2726 | #ifdef DEBUG |
| 2727 | printf("DBG: Min: %s: op1 = 0x%s : op2 = 0x%s\n",DOFMT(fmt),pr_addr(op1),pr_addr(op2)); |
| 2728 | #endif /* DEBUG */ |
| 2729 | |
| 2730 | /* The registers must specify FPRs valid for operands of type |
| 2731 | "fmt". If they are not valid, the result is undefined. */ |
| 2732 | |
| 2733 | /* The format type should already have been checked: */ |
| 2734 | switch (fmt) |
| 2735 | { |
| 2736 | case fmt_single: |
| 2737 | { |
| 2738 | sim_fpu wop1; |
| 2739 | sim_fpu wop2; |
| 2740 | sim_fpu_32to (&wop1, op1); |
| 2741 | sim_fpu_32to (&wop2, op2); |
| 2742 | cmp = sim_fpu_cmp (&wop1, &wop2); |
| 2743 | break; |
| 2744 | } |
| 2745 | case fmt_double: |
| 2746 | { |
| 2747 | sim_fpu wop1; |
| 2748 | sim_fpu wop2; |
| 2749 | sim_fpu_64to (&wop1, op1); |
| 2750 | sim_fpu_64to (&wop2, op2); |
| 2751 | cmp = sim_fpu_cmp (&wop1, &wop2); |
| 2752 | break; |
| 2753 | } |
| 2754 | default: |
| 2755 | fprintf (stderr, "Bad switch\n"); |
| 2756 | abort (); |
| 2757 | } |
| 2758 | |
| 2759 | switch (cmp) |
| 2760 | { |
| 2761 | case SIM_FPU_IS_SNAN: |
| 2762 | case SIM_FPU_IS_QNAN: |
| 2763 | result = op1; |
| 2764 | case SIM_FPU_IS_NINF: |
| 2765 | case SIM_FPU_IS_NNUMBER: |
| 2766 | case SIM_FPU_IS_NDENORM: |
| 2767 | case SIM_FPU_IS_NZERO: |
| 2768 | result = op1; /* op1 - op2 < 0 */ |
| 2769 | case SIM_FPU_IS_PINF: |
| 2770 | case SIM_FPU_IS_PNUMBER: |
| 2771 | case SIM_FPU_IS_PDENORM: |
| 2772 | case SIM_FPU_IS_PZERO: |
| 2773 | result = op2; /* op1 - op2 > 0 */ |
| 2774 | default: |
| 2775 | fprintf (stderr, "Bad switch\n"); |
| 2776 | abort (); |
| 2777 | } |
| 2778 | |
| 2779 | #ifdef DEBUG |
| 2780 | printf("DBG: Min: returning 0x%s (format = %s)\n",pr_addr(result),DOFMT(fmt)); |
| 2781 | #endif /* DEBUG */ |
| 2782 | |
| 2783 | return(result); |
| 2784 | } |
| 2785 | #endif |
| 2786 | |
| 2787 | uword64 |
| 2788 | convert (SIM_DESC sd, |
| 2789 | sim_cpu *cpu, |
| 2790 | address_word cia, |
| 2791 | int rm, |
| 2792 | uword64 op, |
| 2793 | FP_formats from, |
| 2794 | FP_formats to) |
| 2795 | { |
| 2796 | sim_fpu wop; |
| 2797 | sim_fpu_round round; |
| 2798 | unsigned32 result32; |
| 2799 | unsigned64 result64; |
| 2800 | |
| 2801 | #ifdef DEBUG |
| 2802 | printf("DBG: Convert: mode %s : op 0x%s : from %s : to %s : (PC = 0x%s)\n",RMMODE(rm),pr_addr(op),DOFMT(from),DOFMT(to),pr_addr(IPC)); |
| 2803 | #endif /* DEBUG */ |
| 2804 | |
| 2805 | switch (rm) |
| 2806 | { |
| 2807 | case FP_RM_NEAREST: |
| 2808 | /* Round result to nearest representable value. When two |
| 2809 | representable values are equally near, round to the value |
| 2810 | that has a least significant bit of zero (i.e. is even). */ |
| 2811 | round = sim_fpu_round_near; |
| 2812 | break; |
| 2813 | case FP_RM_TOZERO: |
| 2814 | /* Round result to the value closest to, and not greater in |
| 2815 | magnitude than, the result. */ |
| 2816 | round = sim_fpu_round_zero; |
| 2817 | break; |
| 2818 | case FP_RM_TOPINF: |
| 2819 | /* Round result to the value closest to, and not less than, |
| 2820 | the result. */ |
| 2821 | round = sim_fpu_round_up; |
| 2822 | break; |
| 2823 | |
| 2824 | case FP_RM_TOMINF: |
| 2825 | /* Round result to the value closest to, and not greater than, |
| 2826 | the result. */ |
| 2827 | round = sim_fpu_round_down; |
| 2828 | break; |
| 2829 | default: |
| 2830 | round = 0; |
| 2831 | fprintf (stderr, "Bad switch\n"); |
| 2832 | abort (); |
| 2833 | } |
| 2834 | |
| 2835 | /* Convert the input to sim_fpu internal format */ |
| 2836 | switch (from) |
| 2837 | { |
| 2838 | case fmt_double: |
| 2839 | sim_fpu_64to (&wop, op); |
| 2840 | break; |
| 2841 | case fmt_single: |
| 2842 | sim_fpu_32to (&wop, op); |
| 2843 | break; |
| 2844 | case fmt_word: |
| 2845 | sim_fpu_i32to (&wop, op, round); |
| 2846 | break; |
| 2847 | case fmt_long: |
| 2848 | sim_fpu_i64to (&wop, op, round); |
| 2849 | break; |
| 2850 | default: |
| 2851 | fprintf (stderr, "Bad switch\n"); |
| 2852 | abort (); |
| 2853 | } |
| 2854 | |
| 2855 | /* Convert sim_fpu format into the output */ |
| 2856 | /* The value WOP is converted to the destination format, rounding |
| 2857 | using mode RM. When the destination is a fixed-point format, then |
| 2858 | a source value of Infinity, NaN or one which would round to an |
| 2859 | integer outside the fixed point range then an IEEE Invalid |
| 2860 | Operation condition is raised. */ |
| 2861 | switch (to) |
| 2862 | { |
| 2863 | case fmt_single: |
| 2864 | sim_fpu_round_32 (&wop, round, 0); |
| 2865 | sim_fpu_to32 (&result32, &wop); |
| 2866 | result64 = result32; |
| 2867 | break; |
| 2868 | case fmt_double: |
| 2869 | sim_fpu_round_64 (&wop, round, 0); |
| 2870 | sim_fpu_to64 (&result64, &wop); |
| 2871 | break; |
| 2872 | case fmt_word: |
| 2873 | sim_fpu_to32i (&result32, &wop, round); |
| 2874 | result64 = result32; |
| 2875 | break; |
| 2876 | case fmt_long: |
| 2877 | sim_fpu_to64i (&result64, &wop, round); |
| 2878 | break; |
| 2879 | default: |
| 2880 | result64 = 0; |
| 2881 | fprintf (stderr, "Bad switch\n"); |
| 2882 | abort (); |
| 2883 | } |
| 2884 | |
| 2885 | #ifdef DEBUG |
| 2886 | printf("DBG: Convert: returning 0x%s (to format = %s)\n",pr_addr(result64),DOFMT(to)); |
| 2887 | #endif /* DEBUG */ |
| 2888 | |
| 2889 | return(result64); |
| 2890 | } |
| 2891 | |
| 2892 | |
| 2893 | /*-- co-processor support routines ------------------------------------------*/ |
| 2894 | |
| 2895 | static int UNUSED |
| 2896 | CoProcPresent(coproc_number) |
| 2897 | unsigned int coproc_number; |
| 2898 | { |
| 2899 | /* Return TRUE if simulator provides a model for the given co-processor number */ |
| 2900 | return(0); |
| 2901 | } |
| 2902 | |
| 2903 | void |
| 2904 | cop_lw (SIM_DESC sd, |
| 2905 | sim_cpu *cpu, |
| 2906 | address_word cia, |
| 2907 | int coproc_num, |
| 2908 | int coproc_reg, |
| 2909 | unsigned int memword) |
| 2910 | { |
| 2911 | switch (coproc_num) |
| 2912 | { |
| 2913 | case 1: |
| 2914 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT) |
| 2915 | { |
| 2916 | #ifdef DEBUG |
| 2917 | printf("DBG: COP_LW: memword = 0x%08X (uword64)memword = 0x%s\n",memword,pr_addr(memword)); |
| 2918 | #endif |
| 2919 | StoreFPR(coproc_reg,fmt_word,(uword64)memword); |
| 2920 | FPR_STATE[coproc_reg] = fmt_uninterpreted; |
| 2921 | break; |
| 2922 | } |
| 2923 | |
| 2924 | default: |
| 2925 | #if 0 /* this should be controlled by a configuration option */ |
| 2926 | sim_io_printf(sd,"COP_LW(%d,%d,0x%08X) at PC = 0x%s : TODO (architecture specific)\n",coproc_num,coproc_reg,memword,pr_addr(cia)); |
| 2927 | #endif |
| 2928 | break; |
| 2929 | } |
| 2930 | |
| 2931 | return; |
| 2932 | } |
| 2933 | |
| 2934 | void |
| 2935 | cop_ld (SIM_DESC sd, |
| 2936 | sim_cpu *cpu, |
| 2937 | address_word cia, |
| 2938 | int coproc_num, |
| 2939 | int coproc_reg, |
| 2940 | uword64 memword) |
| 2941 | { |
| 2942 | switch (coproc_num) { |
| 2943 | case 1: |
| 2944 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT) |
| 2945 | { |
| 2946 | StoreFPR(coproc_reg,fmt_uninterpreted,memword); |
| 2947 | break; |
| 2948 | } |
| 2949 | |
| 2950 | default: |
| 2951 | #if 0 /* this message should be controlled by a configuration option */ |
| 2952 | sim_io_printf(sd,"COP_LD(%d,%d,0x%s) at PC = 0x%s : TODO (architecture specific)\n",coproc_num,coproc_reg,pr_addr(memword),pr_addr(cia)); |
| 2953 | #endif |
| 2954 | break; |
| 2955 | } |
| 2956 | |
| 2957 | return; |
| 2958 | } |
| 2959 | |
| 2960 | |
| 2961 | /* start-sanitize-sky */ |
| 2962 | #ifdef TARGET_SKY |
| 2963 | void |
| 2964 | cop_lq (SIM_DESC sd, |
| 2965 | sim_cpu *cpu, |
| 2966 | address_word cia, |
| 2967 | int coproc_num, |
| 2968 | int coproc_reg, |
| 2969 | unsigned128 memword) |
| 2970 | { |
| 2971 | switch (coproc_num) |
| 2972 | { |
| 2973 | case 2: |
| 2974 | { |
| 2975 | unsigned_16 xyzw; |
| 2976 | |
| 2977 | while(vu0_busy()) |
| 2978 | vu0_issue(sd); |
| 2979 | |
| 2980 | memcpy(& xyzw, & memword, sizeof(xyzw)); |
| 2981 | xyzw = H2T_16(xyzw); |
| 2982 | /* one word at a time, argh! */ |
| 2983 | write_vu_vec_reg(&(vu0_device.regs), coproc_reg, 0, A4_16(& xyzw, 3)); |
| 2984 | write_vu_vec_reg(&(vu0_device.regs), coproc_reg, 1, A4_16(& xyzw, 2)); |
| 2985 | write_vu_vec_reg(&(vu0_device.regs), coproc_reg, 2, A4_16(& xyzw, 1)); |
| 2986 | write_vu_vec_reg(&(vu0_device.regs), coproc_reg, 3, A4_16(& xyzw, 0)); |
| 2987 | } |
| 2988 | break; |
| 2989 | |
| 2990 | default: |
| 2991 | sim_io_printf(sd,"COP_LQ(%d,%d,??) at PC = 0x%s : TODO (architecture specific)\n", |
| 2992 | coproc_num,coproc_reg,pr_addr(cia)); |
| 2993 | break; |
| 2994 | } |
| 2995 | |
| 2996 | return; |
| 2997 | } |
| 2998 | #endif /* TARGET_SKY */ |
| 2999 | /* end-sanitize-sky */ |
| 3000 | |
| 3001 | |
| 3002 | unsigned int |
| 3003 | cop_sw (SIM_DESC sd, |
| 3004 | sim_cpu *cpu, |
| 3005 | address_word cia, |
| 3006 | int coproc_num, |
| 3007 | int coproc_reg) |
| 3008 | { |
| 3009 | unsigned int value = 0; |
| 3010 | |
| 3011 | switch (coproc_num) |
| 3012 | { |
| 3013 | case 1: |
| 3014 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT) |
| 3015 | { |
| 3016 | FP_formats hold; |
| 3017 | hold = FPR_STATE[coproc_reg]; |
| 3018 | FPR_STATE[coproc_reg] = fmt_word; |
| 3019 | value = (unsigned int)ValueFPR(coproc_reg,fmt_uninterpreted); |
| 3020 | FPR_STATE[coproc_reg] = hold; |
| 3021 | break; |
| 3022 | } |
| 3023 | |
| 3024 | default: |
| 3025 | #if 0 /* should be controlled by configuration option */ |
| 3026 | sim_io_printf(sd,"COP_SW(%d,%d) at PC = 0x%s : TODO (architecture specific)\n",coproc_num,coproc_reg,pr_addr(cia)); |
| 3027 | #endif |
| 3028 | break; |
| 3029 | } |
| 3030 | |
| 3031 | return(value); |
| 3032 | } |
| 3033 | |
| 3034 | uword64 |
| 3035 | cop_sd (SIM_DESC sd, |
| 3036 | sim_cpu *cpu, |
| 3037 | address_word cia, |
| 3038 | int coproc_num, |
| 3039 | int coproc_reg) |
| 3040 | { |
| 3041 | uword64 value = 0; |
| 3042 | switch (coproc_num) |
| 3043 | { |
| 3044 | case 1: |
| 3045 | if (CURRENT_FLOATING_POINT == HARD_FLOATING_POINT) |
| 3046 | { |
| 3047 | value = ValueFPR(coproc_reg,fmt_uninterpreted); |
| 3048 | break; |
| 3049 | } |
| 3050 | |
| 3051 | default: |
| 3052 | #if 0 /* should be controlled by configuration option */ |
| 3053 | sim_io_printf(sd,"COP_SD(%d,%d) at PC = 0x%s : TODO (architecture specific)\n",coproc_num,coproc_reg,pr_addr(cia)); |
| 3054 | #endif |
| 3055 | break; |
| 3056 | } |
| 3057 | |
| 3058 | return(value); |
| 3059 | } |
| 3060 | |
| 3061 | |
| 3062 | /* start-sanitize-sky */ |
| 3063 | #ifdef TARGET_SKY |
| 3064 | unsigned128 |
| 3065 | cop_sq (SIM_DESC sd, |
| 3066 | sim_cpu *cpu, |
| 3067 | address_word cia, |
| 3068 | int coproc_num, |
| 3069 | int coproc_reg) |
| 3070 | { |
| 3071 | unsigned128 value = U16_8(0, 0); |
| 3072 | switch (coproc_num) |
| 3073 | { |
| 3074 | case 2: |
| 3075 | { |
| 3076 | unsigned_16 xyzw; |
| 3077 | |
| 3078 | while(vu0_busy()) |
| 3079 | vu0_issue(sd); |
| 3080 | |
| 3081 | /* one word at a time, argh! */ |
| 3082 | read_vu_vec_reg(&(vu0_device.regs), coproc_reg, 0, A4_16(& xyzw, 3)); |
| 3083 | read_vu_vec_reg(&(vu0_device.regs), coproc_reg, 1, A4_16(& xyzw, 2)); |
| 3084 | read_vu_vec_reg(&(vu0_device.regs), coproc_reg, 2, A4_16(& xyzw, 1)); |
| 3085 | read_vu_vec_reg(&(vu0_device.regs), coproc_reg, 3, A4_16(& xyzw, 0)); |
| 3086 | xyzw = T2H_16(xyzw); |
| 3087 | return xyzw; |
| 3088 | } |
| 3089 | break; |
| 3090 | |
| 3091 | default: |
| 3092 | sim_io_printf(sd,"COP_SQ(%d,%d) at PC = 0x%s : TODO (architecture specific)\n", |
| 3093 | coproc_num,coproc_reg,pr_addr(cia)); |
| 3094 | break; |
| 3095 | } |
| 3096 | |
| 3097 | return(value); |
| 3098 | } |
| 3099 | #endif /* TARGET_SKY */ |
| 3100 | /* end-sanitize-sky */ |
| 3101 | |
| 3102 | |
| 3103 | void |
| 3104 | decode_coproc (SIM_DESC sd, |
| 3105 | sim_cpu *cpu, |
| 3106 | address_word cia, |
| 3107 | unsigned int instruction) |
| 3108 | { |
| 3109 | int coprocnum = ((instruction >> 26) & 3); |
| 3110 | |
| 3111 | switch (coprocnum) |
| 3112 | { |
| 3113 | case 0: /* standard CPU control and cache registers */ |
| 3114 | { |
| 3115 | int code = ((instruction >> 21) & 0x1F); |
| 3116 | /* R4000 Users Manual (second edition) lists the following CP0 |
| 3117 | instructions: |
| 3118 | DMFC0 Doubleword Move From CP0 (VR4100 = 01000000001tttttddddd00000000000) |
| 3119 | DMTC0 Doubleword Move To CP0 (VR4100 = 01000000101tttttddddd00000000000) |
| 3120 | MFC0 word Move From CP0 (VR4100 = 01000000000tttttddddd00000000000) |
| 3121 | MTC0 word Move To CP0 (VR4100 = 01000000100tttttddddd00000000000) |
| 3122 | TLBR Read Indexed TLB Entry (VR4100 = 01000010000000000000000000000001) |
| 3123 | TLBWI Write Indexed TLB Entry (VR4100 = 01000010000000000000000000000010) |
| 3124 | TLBWR Write Random TLB Entry (VR4100 = 01000010000000000000000000000110) |
| 3125 | TLBP Probe TLB for Matching Entry (VR4100 = 01000010000000000000000000001000) |
| 3126 | CACHE Cache operation (VR4100 = 101111bbbbbpppppiiiiiiiiiiiiiiii) |
| 3127 | ERET Exception return (VR4100 = 01000010000000000000000000011000) |
| 3128 | */ |
| 3129 | if (((code == 0x00) || (code == 0x04)) && ((instruction & 0x7FF) == 0)) |
| 3130 | { |
| 3131 | int rt = ((instruction >> 16) & 0x1F); |
| 3132 | int rd = ((instruction >> 11) & 0x1F); |
| 3133 | |
| 3134 | switch (rd) /* NOTEs: Standard CP0 registers */ |
| 3135 | { |
| 3136 | /* 0 = Index R4000 VR4100 VR4300 */ |
| 3137 | /* 1 = Random R4000 VR4100 VR4300 */ |
| 3138 | /* 2 = EntryLo0 R4000 VR4100 VR4300 */ |
| 3139 | /* 3 = EntryLo1 R4000 VR4100 VR4300 */ |
| 3140 | /* 4 = Context R4000 VR4100 VR4300 */ |
| 3141 | /* 5 = PageMask R4000 VR4100 VR4300 */ |
| 3142 | /* 6 = Wired R4000 VR4100 VR4300 */ |
| 3143 | /* 8 = BadVAddr R4000 VR4100 VR4300 */ |
| 3144 | /* 9 = Count R4000 VR4100 VR4300 */ |
| 3145 | /* 10 = EntryHi R4000 VR4100 VR4300 */ |
| 3146 | /* 11 = Compare R4000 VR4100 VR4300 */ |
| 3147 | /* 12 = SR R4000 VR4100 VR4300 */ |
| 3148 | case 12: |
| 3149 | if (code == 0x00) |
| 3150 | GPR[rt] = SR; |
| 3151 | else |
| 3152 | SR = GPR[rt]; |
| 3153 | break; |
| 3154 | /* 13 = Cause R4000 VR4100 VR4300 */ |
| 3155 | case 13: |
| 3156 | if (code == 0x00) |
| 3157 | GPR[rt] = CAUSE; |
| 3158 | else |
| 3159 | CAUSE = GPR[rt]; |
| 3160 | break; |
| 3161 | /* 14 = EPC R4000 VR4100 VR4300 */ |
| 3162 | /* 15 = PRId R4000 VR4100 VR4300 */ |
| 3163 | #ifdef SUBTARGET_R3900 |
| 3164 | /* 16 = Debug */ |
| 3165 | case 16: |
| 3166 | if (code == 0x00) |
| 3167 | GPR[rt] = Debug; |
| 3168 | else |
| 3169 | Debug = GPR[rt]; |
| 3170 | break; |
| 3171 | #else |
| 3172 | /* 16 = Config R4000 VR4100 VR4300 */ |
| 3173 | case 16: |
| 3174 | if (code == 0x00) |
| 3175 | GPR[rt] = C0_CONFIG; |
| 3176 | else |
| 3177 | C0_CONFIG = GPR[rt]; |
| 3178 | break; |
| 3179 | #endif |
| 3180 | #ifdef SUBTARGET_R3900 |
| 3181 | /* 17 = Debug */ |
| 3182 | case 17: |
| 3183 | if (code == 0x00) |
| 3184 | GPR[rt] = DEPC; |
| 3185 | else |
| 3186 | DEPC = GPR[rt]; |
| 3187 | break; |
| 3188 | #else |
| 3189 | /* 17 = LLAddr R4000 VR4100 VR4300 */ |
| 3190 | #endif |
| 3191 | /* 18 = WatchLo R4000 VR4100 VR4300 */ |
| 3192 | /* 19 = WatchHi R4000 VR4100 VR4300 */ |
| 3193 | /* 20 = XContext R4000 VR4100 VR4300 */ |
| 3194 | /* 26 = PErr or ECC R4000 VR4100 VR4300 */ |
| 3195 | /* 27 = CacheErr R4000 VR4100 */ |
| 3196 | /* 28 = TagLo R4000 VR4100 VR4300 */ |
| 3197 | /* 29 = TagHi R4000 VR4100 VR4300 */ |
| 3198 | /* 30 = ErrorEPC R4000 VR4100 VR4300 */ |
| 3199 | GPR[rt] = 0xDEADC0DE; /* CPR[0,rd] */ |
| 3200 | /* CPR[0,rd] = GPR[rt]; */ |
| 3201 | default: |
| 3202 | if (code == 0x00) |
| 3203 | sim_io_printf(sd,"Warning: MFC0 %d,%d ignored (architecture specific)\n",rt,rd); |
| 3204 | else |
| 3205 | sim_io_printf(sd,"Warning: MTC0 %d,%d ignored (architecture specific)\n",rt,rd); |
| 3206 | } |
| 3207 | } |
| 3208 | else if (code == 0x10 && (instruction & 0x3f) == 0x18) |
| 3209 | { |
| 3210 | /* ERET */ |
| 3211 | if (SR & status_ERL) |
| 3212 | { |
| 3213 | /* Oops, not yet available */ |
| 3214 | sim_io_printf(sd,"Warning: ERET when SR[ERL] set not handled yet"); |
| 3215 | PC = EPC; |
| 3216 | SR &= ~status_ERL; |
| 3217 | } |
| 3218 | else |
| 3219 | { |
| 3220 | PC = EPC; |
| 3221 | SR &= ~status_EXL; |
| 3222 | } |
| 3223 | } |
| 3224 | else if (code == 0x10 && (instruction & 0x3f) == 0x10) |
| 3225 | { |
| 3226 | /* RFE */ |
| 3227 | } |
| 3228 | else if (code == 0x10 && (instruction & 0x3f) == 0x1F) |
| 3229 | { |
| 3230 | /* DERET */ |
| 3231 | Debug &= ~Debug_DM; |
| 3232 | DELAYSLOT(); |
| 3233 | DSPC = DEPC; |
| 3234 | } |
| 3235 | else |
| 3236 | sim_io_eprintf(sd,"Unrecognised COP0 instruction 0x%08X at PC = 0x%s : No handler present\n",instruction,pr_addr(cia)); |
| 3237 | /* TODO: When executing an ERET or RFE instruction we should |
| 3238 | clear LLBIT, to ensure that any out-standing atomic |
| 3239 | read/modify/write sequence fails. */ |
| 3240 | } |
| 3241 | break; |
| 3242 | |
| 3243 | case 2: /* co-processor 2 */ |
| 3244 | { |
| 3245 | int handle = 0; |
| 3246 | |
| 3247 | /* start-sanitize-sky */ |
| 3248 | #ifdef TARGET_SKY |
| 3249 | /* On the R5900, this refers to a "VU" vector co-processor. */ |
| 3250 | |
| 3251 | int i_25_21 = (instruction >> 21) & 0x1f; |
| 3252 | int i_20_16 = (instruction >> 16) & 0x1f; |
| 3253 | int i_20_6 = (instruction >> 6) & 0x7fff; |
| 3254 | int i_15_11 = (instruction >> 11) & 0x1f; |
| 3255 | int i_15_0 = instruction & 0xffff; |
| 3256 | int i_10_1 = (instruction >> 1) & 0x3ff; |
| 3257 | int i_10_0 = instruction & 0x7ff; |
| 3258 | int i_10_6 = (instruction >> 6) & 0x1f; |
| 3259 | int i_5_0 = instruction & 0x03f; |
| 3260 | int interlock = instruction & 0x01; |
| 3261 | /* setup for semantic.c-like actions below */ |
| 3262 | typedef unsigned_4 instruction_word; |
| 3263 | int CIA = cia; |
| 3264 | int NIA = cia + 4; |
| 3265 | sim_cpu* CPU_ = cpu; |
| 3266 | |
| 3267 | handle = 1; |
| 3268 | |
| 3269 | /* test COP2 usability */ |
| 3270 | if(! (SR & status_CU2)) |
| 3271 | { |
| 3272 | SignalException(CoProcessorUnusable,instruction); |
| 3273 | /* NOTREACHED */ |
| 3274 | } |
| 3275 | |
| 3276 | /* classify & execute basic COP2 instructions */ |
| 3277 | if(i_25_21 == 0x08 && i_20_16 == 0x00) /* BC2F */ |
| 3278 | { |
| 3279 | address_word offset = EXTEND16(i_15_0) << 2; |
| 3280 | if(! vu0_busy()) DELAY_SLOT(cia + 4 + offset); |
| 3281 | } |
| 3282 | else if(i_25_21 == 0x08 && i_20_16==0x02) /* BC2FL */ |
| 3283 | { |
| 3284 | address_word offset = EXTEND16(i_15_0) << 2; |
| 3285 | if(! vu0_busy()) DELAY_SLOT(cia + 4 + offset); |
| 3286 | else NULLIFY_NEXT_INSTRUCTION(); |
| 3287 | } |
| 3288 | else if(i_25_21 == 0x08 && i_20_16 == 0x01) /* BC2T */ |
| 3289 | { |
| 3290 | address_word offset = EXTEND16(i_15_0) << 2; |
| 3291 | if(vu0_busy()) DELAY_SLOT(cia + 4 + offset); |
| 3292 | } |
| 3293 | else if(i_25_21 == 0x08 && i_20_16 == 0x03) /* BC2TL */ |
| 3294 | { |
| 3295 | address_word offset = EXTEND16(i_15_0) << 2; |
| 3296 | if(vu0_busy()) DELAY_SLOT(cia + 4 + offset); |
| 3297 | else NULLIFY_NEXT_INSTRUCTION(); |
| 3298 | } |
| 3299 | else if((i_25_21 == 0x02 && i_10_1 == 0x000) || /* CFC2 */ |
| 3300 | (i_25_21 == 0x01)) /* QMFC2 */ |
| 3301 | { |
| 3302 | int rt = i_20_16; |
| 3303 | int id = i_15_11; |
| 3304 | |
| 3305 | /* interlock checking */ |
| 3306 | /* POLICY: never busy in macro mode */ |
| 3307 | while(vu0_busy() && interlock) |
| 3308 | vu0_issue(sd); |
| 3309 | |
| 3310 | /* perform VU register address */ |
| 3311 | if(i_25_21 == 0x01) /* QMFC2 */ |
| 3312 | { |
| 3313 | unsigned_16 xyzw; |
| 3314 | /* one word at a time, argh! */ |
| 3315 | read_vu_vec_reg(&(vu0_device.regs), id, 0, A4_16(& xyzw, 3)); |
| 3316 | read_vu_vec_reg(&(vu0_device.regs), id, 1, A4_16(& xyzw, 2)); |
| 3317 | read_vu_vec_reg(&(vu0_device.regs), id, 2, A4_16(& xyzw, 1)); |
| 3318 | read_vu_vec_reg(&(vu0_device.regs), id, 3, A4_16(& xyzw, 0)); |
| 3319 | xyzw = T2H_16(xyzw); |
| 3320 | memcpy(& GPR[rt], & xyzw, sizeof(xyzw)); |
| 3321 | } |
| 3322 | else /* CFC2 */ |
| 3323 | { |
| 3324 | unsigned_4 data; |
| 3325 | /* enum + int calculation, argh! */ |
| 3326 | id = VU_REG_MST + 16 * id; |
| 3327 | read_vu_misc_reg(&(vu0_device.regs), id, & data); |
| 3328 | GPR[rt] = EXTEND32(T2H_4(data)); |
| 3329 | } |
| 3330 | } |
| 3331 | else if((i_25_21 == 0x06 && i_10_1 == 0x000) || /* CTC2 */ |
| 3332 | (i_25_21 == 0x05)) /* QMTC2 */ |
| 3333 | { |
| 3334 | int rt = i_20_16; |
| 3335 | int id = i_15_11; |
| 3336 | |
| 3337 | /* interlock checking */ |
| 3338 | /* POLICY: never busy in macro mode */ |
| 3339 | if(vu0_busy() && interlock) |
| 3340 | { |
| 3341 | while(! vu0_micro_interlock_released()) |
| 3342 | vu0_issue(sd); |
| 3343 | } |
| 3344 | |
| 3345 | /* perform VU register address */ |
| 3346 | if(i_25_21 == 0x05) /* QMTC2 */ |
| 3347 | { |
| 3348 | unsigned_16 xyzw; |
| 3349 | memcpy(& xyzw, & GPR[rt], sizeof(xyzw)); |
| 3350 | xyzw = H2T_16(xyzw); |
| 3351 | /* one word at a time, argh! */ |
| 3352 | write_vu_vec_reg(&(vu0_device.regs), id, 0, A4_16(& xyzw, 3)); |
| 3353 | write_vu_vec_reg(&(vu0_device.regs), id, 1, A4_16(& xyzw, 2)); |
| 3354 | write_vu_vec_reg(&(vu0_device.regs), id, 2, A4_16(& xyzw, 1)); |
| 3355 | write_vu_vec_reg(&(vu0_device.regs), id, 3, A4_16(& xyzw, 0)); |
| 3356 | } |
| 3357 | else /* CTC2 */ |
| 3358 | { |
| 3359 | unsigned_4 data = H2T_4(GPR[rt]); |
| 3360 | /* enum + int calculation, argh! */ |
| 3361 | id = VU_REG_MST + 16 * id; |
| 3362 | write_vu_misc_reg(&(vu0_device.regs), id, & data); |
| 3363 | } |
| 3364 | } |
| 3365 | else if(i_10_0 == 0x3bf) /* VWAITQ */ |
| 3366 | { |
| 3367 | while(vu0_q_busy()) |
| 3368 | vu0_issue(sd); |
| 3369 | } |
| 3370 | else if(i_5_0 == 0x38) /* VCALLMS */ |
| 3371 | { |
| 3372 | unsigned_4 data = H2T_2(i_20_6); |
| 3373 | |
| 3374 | while(vu0_busy()) |
| 3375 | vu0_issue(sd); |
| 3376 | |
| 3377 | /* write to reserved CIA register to get VU0 moving */ |
| 3378 | write_vu_special_reg(& vu0_device, VU_REG_CIA, & data); |
| 3379 | |
| 3380 | ASSERT(vu0_busy()); |
| 3381 | } |
| 3382 | else if(i_5_0 == 0x39) /* VCALLMSR */ |
| 3383 | { |
| 3384 | unsigned_4 data; |
| 3385 | |
| 3386 | while(vu0_busy()) |
| 3387 | vu0_issue(sd); |
| 3388 | |
| 3389 | read_vu_special_reg(& vu0_device, VU_REG_CMSAR0, & data); |
| 3390 | /* write to reserved CIA register to get VU0 moving */ |
| 3391 | write_vu_special_reg(& vu0_device, VU_REG_CIA, & data); |
| 3392 | |
| 3393 | ASSERT(vu0_busy()); |
| 3394 | } |
| 3395 | /* handle all remaining UPPER VU instructions in one block */ |
| 3396 | else if((i_5_0 < 0x30) || /* VADDx .. VMINI */ |
| 3397 | (i_5_0 >= 0x3c && i_10_6 < 0x0c)) /* VADDAx .. VNOP */ |
| 3398 | { |
| 3399 | unsigned_4 vu_upper, vu_lower; |
| 3400 | vu_upper = |
| 3401 | 0x00000000 | /* bits 31 .. 25 */ |
| 3402 | (instruction & 0x01ffffff); /* bits 24 .. 0 */ |
| 3403 | vu_lower = 0x8000033c; /* NOP */ |
| 3404 | |
| 3405 | /* POLICY: never busy in macro mode */ |
| 3406 | while(vu0_busy()) |
| 3407 | vu0_issue(sd); |
| 3408 | |
| 3409 | vu0_macro_issue(vu_upper, vu_lower); |
| 3410 | |
| 3411 | /* POLICY: wait for completion of macro-instruction */ |
| 3412 | while(vu0_busy()) |
| 3413 | vu0_issue(sd); |
| 3414 | } |
| 3415 | /* handle all remaining LOWER VU instructions in one block */ |
| 3416 | else if((i_5_0 >= 0x30 && i_5_0 <= 0x35) || /* VIADD .. VIOR */ |
| 3417 | (i_5_0 >= 0x3c && i_10_6 >= 0x0c)) /* VMOVE .. VRXOR */ |
| 3418 | { /* N.B.: VWAITQ already covered by prior case */ |
| 3419 | unsigned_4 vu_upper, vu_lower; |
| 3420 | vu_upper = 0x000002ff; /* NOP/NOP */ |
| 3421 | vu_lower = |
| 3422 | 0x80000000 | /* bits 31 .. 25 */ |
| 3423 | (instruction & 0x01ffffff); /* bits 24 .. 0 */ |
| 3424 | |
| 3425 | /* POLICY: never busy in macro mode */ |
| 3426 | while(vu0_busy()) |
| 3427 | vu0_issue(sd); |
| 3428 | |
| 3429 | vu0_macro_issue(vu_upper, vu_lower); |
| 3430 | |
| 3431 | /* POLICY: wait for completion of macro-instruction */ |
| 3432 | while(vu0_busy()) |
| 3433 | vu0_issue(sd); |
| 3434 | } |
| 3435 | /* ... no other COP2 instructions ... */ |
| 3436 | else |
| 3437 | { |
| 3438 | SignalException(ReservedInstruction, instruction); |
| 3439 | /* NOTREACHED */ |
| 3440 | } |
| 3441 | |
| 3442 | /* cleanup for semantic.c-like actions above */ |
| 3443 | PC = NIA; |
| 3444 | |
| 3445 | #endif /* TARGET_SKY */ |
| 3446 | /* end-sanitize-sky */ |
| 3447 | |
| 3448 | if(! handle) |
| 3449 | { |
| 3450 | sim_io_eprintf(sd, "COP2 instruction 0x%08X at PC = 0x%s : No handler present\n", |
| 3451 | instruction,pr_addr(cia)); |
| 3452 | } |
| 3453 | } |
| 3454 | break; |
| 3455 | |
| 3456 | case 1: /* should not occur (FPU co-processor) */ |
| 3457 | case 3: /* should not occur (FPU co-processor) */ |
| 3458 | SignalException(ReservedInstruction,instruction); |
| 3459 | break; |
| 3460 | } |
| 3461 | |
| 3462 | return; |
| 3463 | } |
| 3464 | |
| 3465 | |
| 3466 | /*-- instruction simulation -------------------------------------------------*/ |
| 3467 | |
| 3468 | /* When the IGEN simulator is being built, the function below is be |
| 3469 | replaced by a generated version. However, WITH_IGEN == 2 indicates |
| 3470 | that the fubction below should be compiled but under a different |
| 3471 | name (to allow backward compatibility) */ |
| 3472 | |
| 3473 | #if (WITH_IGEN != 1) |
| 3474 | #if (WITH_IGEN > 1) |
| 3475 | void old_engine_run PARAMS ((SIM_DESC sd, int next_cpu_nr, int siggnal)); |
| 3476 | void |
| 3477 | old_engine_run (sd, next_cpu_nr, nr_cpus, siggnal) |
| 3478 | #else |
| 3479 | void |
| 3480 | sim_engine_run (sd, next_cpu_nr, nr_cpus, siggnal) |
| 3481 | #endif |
| 3482 | SIM_DESC sd; |
| 3483 | int next_cpu_nr; /* ignore */ |
| 3484 | int nr_cpus; /* ignore */ |
| 3485 | int siggnal; /* ignore */ |
| 3486 | { |
| 3487 | sim_cpu *cpu = STATE_CPU (sd, 0); /* hardwire to cpu 0 */ |
| 3488 | #if !defined(FASTSIM) |
| 3489 | unsigned int pipeline_count = 1; |
| 3490 | #endif |
| 3491 | |
| 3492 | #ifdef DEBUG |
| 3493 | if (STATE_MEMORY (sd) == NULL) { |
| 3494 | printf("DBG: simulate() entered with no memory\n"); |
| 3495 | exit(1); |
| 3496 | } |
| 3497 | #endif /* DEBUG */ |
| 3498 | |
| 3499 | #if 0 /* Disabled to check that everything works OK */ |
| 3500 | /* The VR4300 seems to sign-extend the PC on its first |
| 3501 | access. However, this may just be because it is currently |
| 3502 | configured in 32bit mode. However... */ |
| 3503 | PC = SIGNEXTEND(PC,32); |
| 3504 | #endif |
| 3505 | |
| 3506 | /* main controlling loop */ |
| 3507 | while (1) { |
| 3508 | /* vaddr is slowly being replaced with cia - current instruction |
| 3509 | address */ |
| 3510 | address_word cia = (uword64)PC; |
| 3511 | address_word vaddr = cia; |
| 3512 | address_word paddr; |
| 3513 | int cca; |
| 3514 | unsigned int instruction; /* uword64? what's this used for? FIXME! */ |
| 3515 | |
| 3516 | #ifdef DEBUG |
| 3517 | { |
| 3518 | printf("DBG: state = 0x%08X :",state); |
| 3519 | if (state & simHALTEX) printf(" simHALTEX"); |
| 3520 | if (state & simHALTIN) printf(" simHALTIN"); |
| 3521 | printf("\n"); |
| 3522 | } |
| 3523 | #endif /* DEBUG */ |
| 3524 | |
| 3525 | DSSTATE = (STATE & simDELAYSLOT); |
| 3526 | #ifdef DEBUG |
| 3527 | if (dsstate) |
| 3528 | sim_io_printf(sd,"DBG: DSPC = 0x%s\n",pr_addr(DSPC)); |
| 3529 | #endif /* DEBUG */ |
| 3530 | |
| 3531 | /* Fetch the next instruction from the simulator memory: */ |
| 3532 | if (AddressTranslation(cia,isINSTRUCTION,isLOAD,&paddr,&cca,isTARGET,isREAL)) { |
| 3533 | if ((vaddr & 1) == 0) { |
| 3534 | /* Copy the action of the LW instruction */ |
| 3535 | unsigned int reverse = (ReverseEndian ? (LOADDRMASK >> 2) : 0); |
| 3536 | unsigned int bigend = (BigEndianCPU ? (LOADDRMASK >> 2) : 0); |
| 3537 | uword64 value; |
| 3538 | unsigned int byte; |
| 3539 | paddr = ((paddr & ~LOADDRMASK) | ((paddr & LOADDRMASK) ^ (reverse << 2))); |
| 3540 | LoadMemory(&value,NULL,cca,AccessLength_WORD,paddr,vaddr,isINSTRUCTION,isREAL); |
| 3541 | byte = ((vaddr & LOADDRMASK) ^ (bigend << 2)); |
| 3542 | instruction = ((value >> (8 * byte)) & 0xFFFFFFFF); |
| 3543 | } else { |
| 3544 | /* Copy the action of the LH instruction */ |
| 3545 | unsigned int reverse = (ReverseEndian ? (LOADDRMASK >> 1) : 0); |
| 3546 | unsigned int bigend = (BigEndianCPU ? (LOADDRMASK >> 1) : 0); |
| 3547 | uword64 value; |
| 3548 | unsigned int byte; |
| 3549 | paddr = (((paddr & ~ (uword64) 1) & ~LOADDRMASK) |
| 3550 | | (((paddr & ~ (uword64) 1) & LOADDRMASK) ^ (reverse << 1))); |
| 3551 | LoadMemory(&value,NULL,cca, AccessLength_HALFWORD, |
| 3552 | paddr & ~ (uword64) 1, |
| 3553 | vaddr, isINSTRUCTION, isREAL); |
| 3554 | byte = (((vaddr &~ (uword64) 1) & LOADDRMASK) ^ (bigend << 1)); |
| 3555 | instruction = ((value >> (8 * byte)) & 0xFFFF); |
| 3556 | } |
| 3557 | } else { |
| 3558 | fprintf(stderr,"Cannot translate address for PC = 0x%s failed\n",pr_addr(PC)); |
| 3559 | exit(1); |
| 3560 | } |
| 3561 | |
| 3562 | #ifdef DEBUG |
| 3563 | sim_io_printf(sd,"DBG: fetched 0x%08X from PC = 0x%s\n",instruction,pr_addr(PC)); |
| 3564 | #endif /* DEBUG */ |
| 3565 | |
| 3566 | /* This is required by exception processing, to ensure that we can |
| 3567 | cope with exceptions in the delay slots of branches that may |
| 3568 | already have changed the PC. */ |
| 3569 | if ((vaddr & 1) == 0) |
| 3570 | PC += 4; /* increment ready for the next fetch */ |
| 3571 | else |
| 3572 | PC += 2; |
| 3573 | /* NOTE: If we perform a delay slot change to the PC, this |
| 3574 | increment is not requuired. However, it would make the |
| 3575 | simulator more complicated to try and avoid this small hit. */ |
| 3576 | |
| 3577 | /* Currently this code provides a simple model. For more |
| 3578 | complicated models we could perform exception status checks at |
| 3579 | this point, and set the simSTOP state as required. This could |
| 3580 | also include processing any hardware interrupts raised by any |
| 3581 | I/O model attached to the simulator context. |
| 3582 | |
| 3583 | Support for "asynchronous" I/O events within the simulated world |
| 3584 | could be providing by managing a counter, and calling a I/O |
| 3585 | specific handler when a particular threshold is reached. On most |
| 3586 | architectures a decrement and check for zero operation is |
| 3587 | usually quicker than an increment and compare. However, the |
| 3588 | process of managing a known value decrement to zero, is higher |
| 3589 | than the cost of using an explicit value UINT_MAX into the |
| 3590 | future. Which system is used will depend on how complicated the |
| 3591 | I/O model is, and how much it is likely to affect the simulator |
| 3592 | bandwidth. |
| 3593 | |
| 3594 | If events need to be scheduled further in the future than |
| 3595 | UINT_MAX event ticks, then the I/O model should just provide its |
| 3596 | own counter, triggered from the event system. */ |
| 3597 | |
| 3598 | /* MIPS pipeline ticks. To allow for future support where the |
| 3599 | pipeline hit of individual instructions is known, this control |
| 3600 | loop manages a "pipeline_count" variable. It is initialised to |
| 3601 | 1 (one), and will only be changed by the simulator engine when |
| 3602 | executing an instruction. If the engine does not have access to |
| 3603 | pipeline cycle count information then all instructions will be |
| 3604 | treated as using a single cycle. NOTE: A standard system is not |
| 3605 | provided by the default simulator because different MIPS |
| 3606 | architectures have different cycle counts for the same |
| 3607 | instructions. |
| 3608 | |
| 3609 | [NOTE: pipeline_count has been replaced the event queue] */ |
| 3610 | |
| 3611 | /* shuffle the floating point status pipeline state */ |
| 3612 | ENGINE_ISSUE_PREFIX_HOOK(); |
| 3613 | |
| 3614 | /* NOTE: For multi-context simulation environments the "instruction" |
| 3615 | variable should be local to this routine. */ |
| 3616 | |
| 3617 | /* Shorthand accesses for engine. Note: If we wanted to use global |
| 3618 | variables (and a single-threaded simulator engine), then we can |
| 3619 | create the actual variables with these names. */ |
| 3620 | |
| 3621 | if (!(STATE & simSKIPNEXT)) { |
| 3622 | /* Include the simulator engine */ |
| 3623 | #include "oengine.c" |
| 3624 | #if ((GPRLEN == 64) && !PROCESSOR_64BIT) || ((GPRLEN == 32) && PROCESSOR_64BIT) |
| 3625 | #error "Mismatch between run-time simulator code and simulation engine" |
| 3626 | #endif |
| 3627 | #if (WITH_TARGET_WORD_BITSIZE != GPRLEN) |
| 3628 | #error "Mismatch between configure WITH_TARGET_WORD_BITSIZE and gencode GPRLEN" |
| 3629 | #endif |
| 3630 | #if ((WITH_FLOATING_POINT == HARD_FLOATING_POINT) != defined (HASFPU)) |
| 3631 | #error "Mismatch between configure WITH_FLOATING_POINT and gencode HASFPU" |
| 3632 | #endif |
| 3633 | |
| 3634 | #if defined(WARN_LOHI) |
| 3635 | /* Decrement the HI/LO validity ticks */ |
| 3636 | if (HIACCESS > 0) |
| 3637 | HIACCESS--; |
| 3638 | if (LOACCESS > 0) |
| 3639 | LOACCESS--; |
| 3640 | /* start-sanitize-r5900 */ |
| 3641 | if (HI1ACCESS > 0) |
| 3642 | HI1ACCESS--; |
| 3643 | if (LO1ACCESS > 0) |
| 3644 | LO1ACCESS--; |
| 3645 | /* end-sanitize-r5900 */ |
| 3646 | #endif /* WARN_LOHI */ |
| 3647 | |
| 3648 | /* For certain MIPS architectures, GPR[0] is hardwired to zero. We |
| 3649 | should check for it being changed. It is better doing it here, |
| 3650 | than within the simulator, since it will help keep the simulator |
| 3651 | small. */ |
| 3652 | if (ZERO != 0) { |
| 3653 | #if defined(WARN_ZERO) |
| 3654 | sim_io_eprintf(sd,"The ZERO register has been updated with 0x%s (PC = 0x%s) (reset back to zero)\n",pr_addr(ZERO),pr_addr(cia)); |
| 3655 | #endif /* WARN_ZERO */ |
| 3656 | ZERO = 0; /* reset back to zero before next instruction */ |
| 3657 | } |
| 3658 | } else /* simSKIPNEXT check */ |
| 3659 | STATE &= ~simSKIPNEXT; |
| 3660 | |
| 3661 | /* If the delay slot was active before the instruction is |
| 3662 | executed, then update the PC to its new value: */ |
| 3663 | if (DSSTATE) { |
| 3664 | #ifdef DEBUG |
| 3665 | printf("DBG: dsstate set before instruction execution - updating PC to 0x%s\n",pr_addr(DSPC)); |
| 3666 | #endif /* DEBUG */ |
| 3667 | PC = DSPC; |
| 3668 | CANCELDELAYSLOT(); |
| 3669 | } |
| 3670 | |
| 3671 | if (MIPSISA < 4) |
| 3672 | PENDING_TICK(); |
| 3673 | |
| 3674 | #if !defined(FASTSIM) |
| 3675 | if (sim_events_tickn (sd, pipeline_count)) |
| 3676 | { |
| 3677 | /* cpu->cia = cia; */ |
| 3678 | sim_events_process (sd); |
| 3679 | } |
| 3680 | #else |
| 3681 | if (sim_events_tick (sd)) |
| 3682 | { |
| 3683 | /* cpu->cia = cia; */ |
| 3684 | sim_events_process (sd); |
| 3685 | } |
| 3686 | #endif /* FASTSIM */ |
| 3687 | } |
| 3688 | } |
| 3689 | #endif |
| 3690 | |
| 3691 | |
| 3692 | /* This code copied from gdb's utils.c. Would like to share this code, |
| 3693 | but don't know of a common place where both could get to it. */ |
| 3694 | |
| 3695 | /* Temporary storage using circular buffer */ |
| 3696 | #define NUMCELLS 16 |
| 3697 | #define CELLSIZE 32 |
| 3698 | static char* |
| 3699 | get_cell() |
| 3700 | { |
| 3701 | static char buf[NUMCELLS][CELLSIZE]; |
| 3702 | static int cell=0; |
| 3703 | if (++cell>=NUMCELLS) cell=0; |
| 3704 | return buf[cell]; |
| 3705 | } |
| 3706 | |
| 3707 | /* Print routines to handle variable size regs, etc */ |
| 3708 | |
| 3709 | /* Eliminate warning from compiler on 32-bit systems */ |
| 3710 | static int thirty_two = 32; |
| 3711 | |
| 3712 | char* |
| 3713 | pr_addr(addr) |
| 3714 | SIM_ADDR addr; |
| 3715 | { |
| 3716 | char *paddr_str=get_cell(); |
| 3717 | switch (sizeof(addr)) |
| 3718 | { |
| 3719 | case 8: |
| 3720 | sprintf(paddr_str,"%08lx%08lx", |
| 3721 | (unsigned long)(addr>>thirty_two),(unsigned long)(addr&0xffffffff)); |
| 3722 | break; |
| 3723 | case 4: |
| 3724 | sprintf(paddr_str,"%08lx",(unsigned long)addr); |
| 3725 | break; |
| 3726 | case 2: |
| 3727 | sprintf(paddr_str,"%04x",(unsigned short)(addr&0xffff)); |
| 3728 | break; |
| 3729 | default: |
| 3730 | sprintf(paddr_str,"%x",addr); |
| 3731 | } |
| 3732 | return paddr_str; |
| 3733 | } |
| 3734 | |
| 3735 | char* |
| 3736 | pr_uword64(addr) |
| 3737 | uword64 addr; |
| 3738 | { |
| 3739 | char *paddr_str=get_cell(); |
| 3740 | sprintf(paddr_str,"%08lx%08lx", |
| 3741 | (unsigned long)(addr>>thirty_two),(unsigned long)(addr&0xffffffff)); |
| 3742 | return paddr_str; |
| 3743 | } |
| 3744 | |
| 3745 | |
| 3746 | |
| 3747 | /*---------------------------------------------------------------------------*/ |
| 3748 | /*> EOF interp.c <*/ |