[deliverable/linux.git] / sound / Kconfig

# sound/Config.in
#

menuconfig SOUND
	tristate "Sound card support"
	depends on HAS_IOMEM
	help
	  If you have a sound card in your computer, i.e. if it can say more
	  than an occasional beep, say Y.  Be sure to have all the information
	  about your sound card and its configuration down (I/O port,
	  interrupt and DMA channel), because you will be asked for it.

	  You want to read the Sound-HOWTO, available from
	  <http://www.tldp.org/docs.html#howto>. General information about
	  the modular sound system is contained in the files
	  <file:Documentation/sound/oss/Introduction>.  The file
	  <file:Documentation/sound/oss/README.OSS> contains some slightly
	  outdated but still useful information as well.  Newer sound
	  driver documentation is found in <file:Documentation/sound/alsa/*>.

	  If you have a PnP sound card and you want to configure it at boot
	  time using the ISA PnP tools (read
	  <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
	  compile the sound card support as a module and load that module
	  after the PnP configuration is finished.  To do this, choose M here
	  and read <file:Documentation/sound/oss/README.modules>; the module
	  will be called soundcore.

if SOUND

config SOUND_OSS_CORE
	bool
	default n

source "sound/oss/dmasound/Kconfig"

if !M68K

menuconfig SND
	tristate "Advanced Linux Sound Architecture"
	help
	  Say 'Y' or 'M' to enable ALSA (Advanced Linux Sound Architecture),
	  the new base sound system.

	  For more information, see <http://www.alsa-project.org/>

if SND

source "sound/core/Kconfig"

source "sound/drivers/Kconfig"

source "sound/isa/Kconfig"

source "sound/pci/Kconfig"

source "sound/ppc/Kconfig"

source "sound/aoa/Kconfig"

source "sound/arm/Kconfig"

source "sound/spi/Kconfig"

source "sound/mips/Kconfig"

source "sound/sh/Kconfig"

# the following will depend on the order of config.
# here assuming USB is defined before ALSA
source "sound/usb/Kconfig"

# the following will depend on the order of config.
# here assuming PCMCIA is defined before ALSA
source "sound/pcmcia/Kconfig"

source "sound/sparc/Kconfig"

source "sound/parisc/Kconfig"

source "sound/soc/Kconfig"

endif # SND

menuconfig SOUND_PRIME
	tristate "Open Sound System (DEPRECATED)"
	select SOUND_OSS_CORE
	help
	  Say 'Y' or 'M' to enable Open Sound System drivers.

if SOUND_PRIME

source "sound/oss/Kconfig"

endif # SOUND_PRIME

endif # !M68K

endif # SOUND

# AC97_BUS is used from both sound and ucb1400
config AC97_BUS
	tristate
	help
	  This is used to avoid config and link hard dependencies between the
	  sound subsystem and other function drivers completely unrelated to
	  sound although they're sharing the AC97 bus. Concerned drivers
	  should "select" this.
Commit	Line	Data
	1	# sound/Config.in
	2	#
	3
	4	menuconfig SOUND
	5	tristate "Sound card support"
	6	depends on HAS_IOMEM
	7	help
	8	If you have a sound card in your computer, i.e. if it can say more
	9	than an occasional beep, say Y. Be sure to have all the information
	10	about your sound card and its configuration down (I/O port,
	11	interrupt and DMA channel), because you will be asked for it.
	12
	13	You want to read the Sound-HOWTO, available from
	14	<http://www.tldp.org/docs.html#howto>. General information about
	15	the modular sound system is contained in the files
	16	<file:Documentation/sound/oss/Introduction>. The file
	17	<file:Documentation/sound/oss/README.OSS> contains some slightly
	18	outdated but still useful information as well. Newer sound
	19	driver documentation is found in <file:Documentation/sound/alsa/*>.
	20
	21	If you have a PnP sound card and you want to configure it at boot
	22	time using the ISA PnP tools (read
	23	<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
	24	compile the sound card support as a module and load that module
	25	after the PnP configuration is finished. To do this, choose M here
	26	and read <file:Documentation/sound/oss/README.modules>; the module
	27	will be called soundcore.
	28
	29	if SOUND
	30
	31	config SOUND_OSS_CORE
	32	bool
	33	default n
	34
	35	source "sound/oss/dmasound/Kconfig"
	36
	37	if !M68K
	38
	39	menuconfig SND
	40	tristate "Advanced Linux Sound Architecture"
	41	help
	42	Say 'Y' or 'M' to enable ALSA (Advanced Linux Sound Architecture),
	43	the new base sound system.
	44
	45	For more information, see <http://www.alsa-project.org/>
	46
	47	if SND
	48
	49	source "sound/core/Kconfig"
	50
	51	source "sound/drivers/Kconfig"
	52
	53	source "sound/isa/Kconfig"
	54
	55	source "sound/pci/Kconfig"
	56
	57	source "sound/ppc/Kconfig"
	58
	59	source "sound/aoa/Kconfig"
	60
	61	source "sound/arm/Kconfig"
	62
	63	source "sound/spi/Kconfig"
	64
	65	source "sound/mips/Kconfig"
	66
	67	source "sound/sh/Kconfig"
	68
	69	# the following will depend on the order of config.
	70	# here assuming USB is defined before ALSA
	71	source "sound/usb/Kconfig"
	72
	73	# the following will depend on the order of config.
	74	# here assuming PCMCIA is defined before ALSA
	75	source "sound/pcmcia/Kconfig"
	76
	77	source "sound/sparc/Kconfig"
	78
	79	source "sound/parisc/Kconfig"
	80
	81	source "sound/soc/Kconfig"
	82
	83	endif # SND
	84
	85	menuconfig SOUND_PRIME
	86	tristate "Open Sound System (DEPRECATED)"
	87	select SOUND_OSS_CORE
	88	help
	89	Say 'Y' or 'M' to enable Open Sound System drivers.
	90
	91	if SOUND_PRIME
	92
	93	source "sound/oss/Kconfig"
	94
	95	endif # SOUND_PRIME
	96
	97	endif # !M68K
	98
	99	endif # SOUND
	100
	101	# AC97_BUS is used from both sound and ucb1400
	102	config AC97_BUS
	103	tristate
	104	help
	105	This is used to avoid config and link hard dependencies between the
	106	sound subsystem and other function drivers completely unrelated to
	107	sound although they're sharing the AC97 bus. Concerned drivers
	108	should "select" this.
	109