Documentation/ABI/testing/sysfs-class-net-mesh

   1
   2 What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
   3 Date:           May 2010
   4 Contact:        Marek Lindner <mareklindner@neomailbox.ch>
   5 Description:
   6                 Indicates whether the batman protocol messages of the
   7                 mesh <mesh_iface> shall be aggregated or not.
   8
   9 What:           /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
  10 Date:           May 2011
  11 Contact:        Antonio Quartulli <antonio@meshcoding.com>
  12 Description:
  13                 Indicates whether the data traffic going from a
  14                 wireless client to another wireless client will be
  15                 silently dropped. <vlan_subdir> is empty when referring
  16                 to the untagged lan.
  17
  18 What:           /sys/class/net/<mesh_iface>/mesh/bonding
  19 Date:           June 2010
  20 Contact:        Simon Wunderlich <sw@simonwunderlich.de>
  21 Description:
  22                 Indicates whether the data traffic going through the
  23                 mesh will be sent using multiple interfaces at the
  24                 same time (if available).
  25
  26 What:           /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
  27 Date:           November 2011
  28 Contact:        Simon Wunderlich <sw@simonwunderlich.de>
  29 Description:
  30                 Indicates whether the bridge loop avoidance feature
  31                 is enabled. This feature detects and avoids loops
  32                 between the mesh and devices bridged with the soft
  33                 interface <mesh_iface>.
  34
  35 What:           /sys/class/net/<mesh_iface>/mesh/fragmentation
  36 Date:           October 2010
  37 Contact:        Andreas Langer <an.langer@gmx.de>
  38 Description:
  39                 Indicates whether the data traffic going through the
  40                 mesh will be fragmented or silently discarded if the
  41                 packet size exceeds the outgoing interface MTU.
  42
  43 What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
  44 Date:           October 2010
  45 Contact:        Marek Lindner <mareklindner@neomailbox.ch>
  46 Description:
  47                 Defines the bandwidth which is propagated by this
  48                 node if gw_mode was set to 'server'.
  49
  50 What:           /sys/class/net/<mesh_iface>/mesh/gw_mode
  51 Date:           October 2010
  52 Contact:        Marek Lindner <mareklindner@neomailbox.ch>
  53 Description:
  54                 Defines the state of the gateway features. Can be
  55                 either 'off', 'client' or 'server'.
  56
  57 What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class
  58 Date:           October 2010
  59 Contact:        Marek Lindner <mareklindner@neomailbox.ch>
  60 Description:
  61                 Defines the selection criteria this node will use
  62                 to choose a gateway if gw_mode was set to 'client'.
  63
  64 What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
  65 Date:           Oct 2010
  66 Contact:        Linus Lüssing <linus.luessing@web.de>
  67 Description:
  68                 Defines the penalty which will be applied to an
  69                 originator message's tq-field on every hop.
  70
  71 What:           /sys/class/net/<mesh_iface>/mesh/isolation_mark
  72 Date:           Nov 2013
  73 Contact:        Antonio Quartulli <antonio@meshcoding.com>
  74 Description:
  75                 Defines the isolation mark (and its bitmask) which
  76                 is used to classify clients as "isolated" by the
  77                 Extended Isolation feature.
  78
  79 What:           /sys/class/net/<mesh_iface>/mesh/network_coding
  80 Date:           Nov 2012
  81 Contact:        Martin Hundeboll <martin@hundeboll.net>
  82 Description:
  83                 Controls whether Network Coding (using some magic
  84                 to send fewer wifi packets but still the same
  85                 content) is enabled or not.
  86
  87 What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
  88 Date:           May 2010
  89 Contact:        Marek Lindner <mareklindner@neomailbox.ch>
  90 Description:
  91                 Defines the interval in milliseconds in which batman
  92                 sends its protocol messages.
  93
  94 What:           /sys/class/net/<mesh_iface>/mesh/routing_algo
  95 Date:           Dec 2011
  96 Contact:        Marek Lindner <mareklindner@neomailbox.ch>
  97 Description:
  98                 Defines the routing procotol this mesh instance
  99                 uses to find the optimal paths through the mesh.