Documentation/devicetree/bindings/arm/atmel-at91.txt

   1 Atmel AT91 device tree bindings.
   2 ================================
   3
   4 Boards with a SoC of the Atmel AT91 or SMART family shall have the following
   5 properties:
   6
   7 Required root node properties:
   8 compatible: must be one of:
   9  * "atmel,at91rm9200"
  10
  11  * "atmel,at91sam9" for SoCs using an ARM926EJ-S core, shall be extended with
  12    the specific SoC family or compatible:
  13     o "atmel,at91sam9260"
  14     o "atmel,at91sam9261"
  15     o "atmel,at91sam9263"
  16     o "atmel,at91sam9x5" for the 5 series, shall be extended with the specific
  17       SoC compatible:
  18        - "atmel,at91sam9g15"
  19        - "atmel,at91sam9g25"
  20        - "atmel,at91sam9g35"
  21        - "atmel,at91sam9x25"
  22        - "atmel,at91sam9x35"
  23     o "atmel,at91sam9g20"
  24     o "atmel,at91sam9g45"
  25     o "atmel,at91sam9n12"
  26     o "atmel,at91sam9rl"
  27     o "atmel,at91sam9xe"
  28  * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
  29    SoC family:
  30     o "atmel,sama5d2" shall be extended with the specific SoC compatible:
  31        - "atmel,sama5d27"
  32     o "atmel,sama5d3" shall be extended with the specific SoC compatible:
  33        - "atmel,sama5d31"
  34        - "atmel,sama5d33"
  35        - "atmel,sama5d34"
  36        - "atmel,sama5d35"
  37        - "atmel,sama5d36"
  38     o "atmel,sama5d4" shall be extended with the specific SoC compatible:
  39        - "atmel,sama5d41"
  40        - "atmel,sama5d42"
  41        - "atmel,sama5d43"
  42        - "atmel,sama5d44"
  43
  44 PIT Timer required properties:
  45 - compatible: Should be "atmel,at91sam9260-pit"
  46 - reg: Should contain registers location and length
  47 - interrupts: Should contain interrupt for the PIT which is the IRQ line
  48   shared across all System Controller members.
  49
  50 System Timer (ST) required properties:
  51 - compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
  52 - reg: Should contain registers location and length
  53 - interrupts: Should contain interrupt for the ST which is the IRQ line
  54   shared across all System Controller members.
  55 - clocks: phandle to input clock.
  56 Its subnodes can be:
  57 - watchdog: compatible should be "atmel,at91rm9200-wdt"
  58
  59 TC/TCLIB Timer required properties:
  60 - compatible: Should be "atmel,<chip>-tcb".
  61   <chip> can be "at91rm9200" or "at91sam9x5"
  62 - reg: Should contain registers location and length
  63 - interrupts: Should contain all interrupts for the TC block
  64   Note that you can specify several interrupt cells if the TC
  65   block has one interrupt per channel.
  66 - clock-names: tuple listing input clock names.
  67         Required elements: "t0_clk", "slow_clk"
  68         Optional elements: "t1_clk", "t2_clk"
  69 - clocks: phandles to input clocks.
  70
  71 Examples:
  72
  73 One interrupt per TC block:
  74         tcb0: timer@fff7c000 {
  75                 compatible = "atmel,at91rm9200-tcb";
  76                 reg = <0xfff7c000 0x100>;
  77                 interrupts = <18 4>;
  78                 clocks = <&tcb0_clk>;
  79                 clock-names = "t0_clk";
  80         };
  81
  82 One interrupt per TC channel in a TC block:
  83         tcb1: timer@fffdc000 {
  84                 compatible = "atmel,at91rm9200-tcb";
  85                 reg = <0xfffdc000 0x100>;
  86                 interrupts = <26 4 27 4 28 4>;
  87                 clocks = <&tcb1_clk>;
  88                 clock-names = "t0_clk";
  89         };
  90
  91 RSTC Reset Controller required properties:
  92 - compatible: Should be "atmel,<chip>-rstc".
  93   <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
  94 - reg: Should contain registers location and length
  95 - clocks: phandle to input clock.
  96
  97 Example:
  98
  99         rstc@fffffd00 {
 100                 compatible = "atmel,at91sam9260-rstc";
 101                 reg = <0xfffffd00 0x10>;
 102                 clocks = <&clk32k>;
 103         };
 104
 105 RAMC SDRAM/DDR Controller required properties:
 106 - compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
 107                         "atmel,at91sam9260-sdramc",
 108                         "atmel,at91sam9g45-ddramc",
 109                         "atmel,sama5d3-ddramc",
 110 - reg: Should contain registers location and length
 111
 112 Examples:
 113
 114         ramc0: ramc@ffffe800 {
 115                 compatible = "atmel,at91sam9g45-ddramc";
 116                 reg = <0xffffe800 0x200>;
 117         };
 118
 119 SHDWC Shutdown Controller
 120
 121 required properties:
 122 - compatible: Should be "atmel,<chip>-shdwc".
 123   <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
 124 - reg: Should contain registers location and length
 125 - clocks: phandle to input clock.
 126
 127 optional properties:
 128 - atmel,wakeup-mode: String, operation mode of the wakeup mode.
 129   Supported values are: "none", "high", "low", "any".
 130 - atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
 131
 132 optional at91sam9260 properties:
 133 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
 134
 135 optional at91sam9rl properties:
 136 - atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
 137 - atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
 138
 139 optional at91sam9x5 properties:
 140 - atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
 141
 142 Example:
 143
 144         shdwc@fffffd10 {
 145                 compatible = "atmel,at91sam9260-shdwc";
 146                 reg = <0xfffffd10 0x10>;
 147                 clocks = <&clk32k>;
 148         };
 149
 150 Special Function Registers (SFR)
 151
 152 Special Function Registers (SFR) manage specific aspects of the integrated
 153 memory, bridge implementations, processor and other functionality not controlled
 154 elsewhere.
 155
 156 required properties:
 157 - compatible: Should be "atmel,<chip>-sfr", "syscon".
 158   <chip> can be "sama5d3" or "sama5d4".
 159 - reg: Should contain registers location and length
 160
 161         sfr@f0038000 {
 162                 compatible = "atmel,sama5d3-sfr", "syscon";
 163                 reg = <0xf0038000 0x60>;
 164         };