Documentation/devicetree/bindings/arm/cci.txt

   1 =======================================================
   2 ARM CCI cache coherent interconnect binding description
   3 =======================================================
   4
   5 ARM multi-cluster systems maintain intra-cluster coherency through a
   6 cache coherent interconnect (CCI) that is capable of monitoring bus
   7 transactions and manage coherency, TLB invalidations and memory barriers.
   8
   9 It allows snooping and distributed virtual memory message broadcast across
  10 clusters, through memory mapped interface, with a global control register
  11 space and multiple sets of interface control registers, one per slave
  12 interface.
  13
  14 Bindings for the CCI node follow the ePAPR standard, available from:
  15
  16 www.power.org/documentation/epapr-version-1-1/
  17
  18 with the addition of the bindings described in this document which are
  19 specific to ARM.
  20
  21 * CCI interconnect node
  22
  23         Description: Describes a CCI cache coherent Interconnect component
  24
  25         Node name must be "cci".
  26         Node's parent must be the root node /, and the address space visible
  27         through the CCI interconnect is the same as the one seen from the
  28         root node (ie from CPUs perspective as per DT standard).
  29         Every CCI node has to define the following properties:
  30
  31         - compatible
  32                 Usage: required
  33                 Value type: <string>
  34                 Definition: must be set to
  35                             "arm,cci-400"
  36
  37         - reg
  38                 Usage: required
  39                 Value type: Integer cells. A register entry, expressed as a pair
  40                             of cells, containing base and size.
  41                 Definition: A standard property. Specifies base physical
  42                             address of CCI control registers common to all
  43                             interfaces.
  44
  45         - ranges:
  46                 Usage: required
  47                 Value type: Integer cells. An array of range entries, expressed
  48                             as a tuple of cells, containing child address,
  49                             parent address and the size of the region in the
  50                             child address space.
  51                 Definition: A standard property. Follow rules in the ePAPR for
  52                             hierarchical bus addressing. CCI interfaces
  53                             addresses refer to the parent node addressing
  54                             scheme to declare their register bases.
  55
  56         CCI interconnect node can define the following child nodes:
  57
  58         - CCI control interface nodes
  59
  60                 Node name must be "slave-if".
  61                 Parent node must be CCI interconnect node.
  62
  63                 A CCI control interface node must contain the following
  64                 properties:
  65
  66                 - compatible
  67                         Usage: required
  68                         Value type: <string>
  69                         Definition: must be set to
  70                                     "arm,cci-400-ctrl-if"
  71
  72                 - interface-type:
  73                         Usage: required
  74                         Value type: <string>
  75                         Definition: must be set to one of {"ace", "ace-lite"}
  76                                     depending on the interface type the node
  77                                     represents.
  78
  79                 - reg:
  80                         Usage: required
  81                         Value type: Integer cells. A register entry, expressed
  82                                     as a pair of cells, containing base and
  83                                     size.
  84                         Definition: the base address and size of the
  85                                     corresponding interface programming
  86                                     registers.
  87
  88         - CCI PMU node
  89
  90                 Parent node must be CCI interconnect node.
  91
  92                 A CCI pmu node must contain the following properties:
  93
  94                 - compatible
  95                         Usage: required
  96                         Value type: <string>
  97                         Definition: Must contain one of:
  98                                  "arm,cci-400-pmu,r0"
  99                                  "arm,cci-400-pmu,r1"
 100                                  "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
 101                                                       secure acces to CCI registers
 102                 - reg:
 103                         Usage: required
 104                         Value type: Integer cells. A register entry, expressed
 105                                     as a pair of cells, containing base and
 106                                     size.
 107                         Definition: the base address and size of the
 108                                     corresponding interface programming
 109                                     registers.
 110
 111                 - interrupts:
 112                         Usage: required
 113                         Value type: Integer cells. Array of interrupt specifier
 114                                     entries, as defined in
 115                                     ../interrupt-controller/interrupts.txt.
 116                         Definition: list of counter overflow interrupts, one per
 117                                     counter. The interrupts must be specified
 118                                     starting with the cycle counter overflow
 119                                     interrupt, followed by counter0 overflow
 120                                     interrupt, counter1 overflow interrupt,...
 121                                     ,counterN overflow interrupt.
 122
 123                                     The CCI PMU has an interrupt signal for each
 124                                     counter. The number of interrupts must be
 125                                     equal to the number of counters.
 126
 127 * CCI interconnect bus masters
 128
 129         Description: masters in the device tree connected to a CCI port
 130                      (inclusive of CPUs and their cpu nodes).
 131
 132         A CCI interconnect bus master node must contain the following
 133         properties:
 134
 135         - cci-control-port:
 136                 Usage: required
 137                 Value type: <phandle>
 138                 Definition: a phandle containing the CCI control interface node
 139                             the master is connected to.
 140
 141 Example:
 142
 143         cpus {
 144                 #size-cells = <0>;
 145                 #address-cells = <1>;
 146
 147                 CPU0: cpu@0 {
 148                         device_type = "cpu";
 149                         compatible = "arm,cortex-a15";
 150                         cci-control-port = <&cci_control1>;
 151                         reg = <0x0>;
 152                 };
 153
 154                 CPU1: cpu@1 {
 155                         device_type = "cpu";
 156                         compatible = "arm,cortex-a15";
 157                         cci-control-port = <&cci_control1>;
 158                         reg = <0x1>;
 159                 };
 160
 161                 CPU2: cpu@100 {
 162                         device_type = "cpu";
 163                         compatible = "arm,cortex-a7";
 164                         cci-control-port = <&cci_control2>;
 165                         reg = <0x100>;
 166                 };
 167
 168                 CPU3: cpu@101 {
 169                         device_type = "cpu";
 170                         compatible = "arm,cortex-a7";
 171                         cci-control-port = <&cci_control2>;
 172                         reg = <0x101>;
 173                 };
 174
 175         };
 176
 177         dma0: dma@3000000 {
 178                 compatible = "arm,pl330", "arm,primecell";
 179                 cci-control-port = <&cci_control0>;
 180                 reg = <0x0 0x3000000 0x0 0x1000>;
 181                 interrupts = <10>;
 182                 #dma-cells = <1>;
 183                 #dma-channels = <8>;
 184                 #dma-requests = <32>;
 185         };
 186
 187         cci@2c090000 {
 188                 compatible = "arm,cci-400";
 189                 #address-cells = <1>;
 190                 #size-cells = <1>;
 191                 reg = <0x0 0x2c090000 0 0x1000>;
 192                 ranges = <0x0 0x0 0x2c090000 0x10000>;
 193
 194                 cci_control0: slave-if@1000 {
 195                         compatible = "arm,cci-400-ctrl-if";
 196                         interface-type = "ace-lite";
 197                         reg = <0x1000 0x1000>;
 198                 };
 199
 200                 cci_control1: slave-if@4000 {
 201                         compatible = "arm,cci-400-ctrl-if";
 202                         interface-type = "ace";
 203                         reg = <0x4000 0x1000>;
 204                 };
 205
 206                 cci_control2: slave-if@5000 {
 207                         compatible = "arm,cci-400-ctrl-if";
 208                         interface-type = "ace";
 209                         reg = <0x5000 0x1000>;
 210                 };
 211
 212                 pmu@9000 {
 213                          compatible = "arm,cci-400-pmu";
 214                          reg = <0x9000 0x5000>;
 215                          interrupts = <0 101 4>,
 216                                       <0 102 4>,
 217                                       <0 103 4>,
 218                                       <0 104 4>,
 219                                       <0 105 4>;
 220                 };
 221         };
 222
 223 This CCI node corresponds to a CCI component whose control registers sits
 224 at address 0x000000002c090000.
 225 CCI slave interface @0x000000002c091000 is connected to dma controller dma0.
 226 CCI slave interface @0x000000002c094000 is connected to CPUs {CPU0, CPU1};
 227 CCI slave interface @0x000000002c095000 is connected to CPUs {CPU2, CPU3};