Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt

   1 Tegra124 SoC SATA AHCI controller
   2
   3 Required properties :
   4 - compatible : For Tegra124, must contain "nvidia,tegra124-ahci".  Otherwise,
   5   must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
   6   is tegra132.
   7 - reg : Should contain 2 entries:
   8   - AHCI register set (SATA BAR5)
   9   - SATA register set
  10 - interrupts : Defines the interrupt used by SATA
  11 - clocks : Must contain an entry for each entry in clock-names.
  12   See ../clocks/clock-bindings.txt for details.
  13 - clock-names : Must include the following entries:
  14   - sata
  15   - sata-oob
  16   - cml1
  17   - pll_e
  18 - resets : Must contain an entry for each entry in reset-names.
  19   See ../reset/reset.txt for details.
  20 - reset-names : Must include the following entries:
  21   - sata
  22   - sata-oob
  23   - sata-cold
  24 - phys : Must contain an entry for each entry in phy-names.
  25   See ../phy/phy-bindings.txt for details.
  26 - phy-names : Must include the following entries:
  27   - sata-phy : XUSB PADCTL SATA PHY
  28 - hvdd-supply : Defines the SATA HVDD regulator
  29 - vddio-supply : Defines the SATA VDDIO regulator
  30 - avdd-supply : Defines the SATA AVDD regulator
  31 - target-5v-supply : Defines the SATA 5V power regulator
  32 - target-12v-supply : Defines the SATA 12V power regulator