Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt

   1 Tegra124 CPU frequency scaling driver bindings
   2 ----------------------------------------------
   3
   4 Both required and optional properties listed below must be defined
   5 under node /cpus/cpu@0.
   6
   7 Required properties:
   8 - clocks: Must contain an entry for each entry in clock-names.
   9   See ../clocks/clock-bindings.txt for details.
  10 - clock-names: Must include the following entries:
  11   - cpu_g: Clock mux for the fast CPU cluster.
  12   - cpu_lp: Clock mux for the low-power CPU cluster.
  13   - pll_x: Fast PLL clocksource.
  14   - pll_p: Auxiliary PLL used during fast PLL rate changes.
  15   - dfll: Fast DFLL clocksource that also automatically scales CPU voltage.
  16 - vdd-cpu-supply: Regulator for CPU voltage
  17
  18 Optional properties:
  19 - clock-latency: Specify the possible maximum transition latency for clock,
  20   in unit of nanoseconds.
  21
  22 Example:
  23 --------
  24 cpus {
  25         #address-cells = <1>;
  26         #size-cells = <0>;
  27
  28         cpu@0 {
  29                 device_type = "cpu";
  30                 compatible = "arm,cortex-a15";
  31                 reg = <0>;
  32
  33                 clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
  34                          <&tegra_car TEGRA124_CLK_CCLK_LP>,
  35                          <&tegra_car TEGRA124_CLK_PLL_X>,
  36                          <&tegra_car TEGRA124_CLK_PLL_P>,
  37                          <&dfll>;
  38                 clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
  39                 clock-latency = <300000>;
  40                 vdd-cpu-supply: <&vdd_cpu>;
  41         };
  42
  43         <...>
  44 };