Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt

   1 PXA LCD Controller
   2 ------------------
   3
   4 Required properties:
   5  - compatible : one of these
   6         "marvell,pxa2xx-lcdc",
   7         "marvell,pxa270-lcdc",
   8         "marvell,pxa300-lcdc"
   9  - reg : should contain 1 register range (address and length).
  10  - interrupts : framebuffer controller interrupt.
  11  - clocks: phandle to input clocks
  12
  13 Required nodes:
  14  - port: connection to the LCD panel (see video-interfaces.txt)
  15          This node must have its properties bus-width and remote-endpoint set.
  16          If the panel is not a TFT color panel, then a "lcd-type" property in
  17          the panel should specify the panel type.
  18          This panel node should be in the board dts.
  19
  20 Example:
  21         lcd-controller@40500000 {
  22                 compatible = "marvell,pxa2xx-lcdc";
  23                 reg = <0x44000000 0x10000>;
  24                 interrupts = <17>;
  25                 clocks = <&clks CLK_LCD>;
  26                 status = "okay";
  27
  28                 port {
  29                         lcdc_out: endpoint {
  30                                 remote-endpoint = <&panel_in>;
  31                                 bus-width = <16>;
  32                         };
  33                 };
  34         };