Documentation/devicetree/bindings/i2c/i2c-digicolor.txt

   1 Conexant Digicolor I2C controller
   2
   3 Required properties:
   4  - compatible: must be "cnxt,cx92755-i2c"
   5  - reg: physical address and length of the device registers
   6  - interrupts: a single interrupt specifier
   7  - clocks: clock for the device
   8  - #address-cells: should be <1>
   9  - #size-cells: should be <0>
  10
  11 Optional properties:
  12 - clock-frequency: the desired I2C bus clock frequency in Hz; in
  13   absence of this property the default value is used (100 kHz).
  14
  15 Example:
  16
  17         i2c: i2c@f0000120 {
  18                 compatible = "cnxt,cx92755-i2c";
  19                 reg = <0xf0000120 0x10>;
  20                 interrupts = <28>;
  21                 clocks = <&main_clk>;
  22                 clock-frequency = <100000>;
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25         };