Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
[deliverable/linux.git] / Documentation / devicetree / bindings / mfd / ab8500.txt
1 * AB8500 Multi-Functional Device (MFD)
2
3 Required parent device properties:
4 - compatible : contains "stericsson,ab8500";
5 - interrupts : contains the IRQ line for the AB8500
6 - interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain)
7 - #interrupt-cells : should be 2, for 2-cell format
8 - The first cell is the AB8500 local IRQ number
9 - The second cell is used to specify optional parameters
10 - bits[3:0] trigger type and level flags:
11 1 = low-to-high edge triggered
12 2 = high-to-low edge triggered
13 4 = active high level-sensitive
14 8 = active low level-sensitive
15
16 The AB8500 consists of a large and varied group of sub-devices:
17
18 Device IRQ Names Supply Names Description
19 ------ --------- ------------ -----------
20 ab8500-bm : : : Battery Manager
21 ab8500-btemp : : : Battery Temperature
22 ab8500-charger : : : Battery Charger
23 ab8500-codec : : : Audio Codec
24 ab8500-fg : : vddadc : Fuel Gauge
25 : NCONV_ACCU : : Accumulate N Sample Conversion
26 : BATT_OVV : : Battery Over Voltage
27 : LOW_BAT_F : : LOW threshold battery voltage
28 : CC_INT_CALIB : : Coulomb Counter Internal Calibration
29 : CCEOC : : Coulomb Counter End of Conversion
30 ab8500-btemp : : vtvout : Battery Temperature
31 : BAT_CTRL_INDB : : Battery Removal Indicator
32 : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C
33 : BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
34 : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
35 : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
36 ab8500-charger : : vddadc : Charger interface
37 : MAIN_CH_UNPLUG_DET : : main charger unplug detection management (not in 8505)
38 : MAIN_CHARGE_PLUG_DET : : main charger plug detection management (not in 8505)
39 : MAIN_EXT_CH_NOT_OK : : main charger not OK
40 : MAIN_CH_TH_PROT_R : : Die temp is above main charger
41 : MAIN_CH_TH_PROT_F : : Die temp is below main charger
42 : VBUS_DET_F : : VBUS falling detected
43 : VBUS_DET_R : : VBUS rising detected
44 : USB_LINK_STATUS : : USB link status has changed
45 : USB_CH_TH_PROT_R : : Die temp is above usb charger
46 : USB_CH_TH_PROT_F : : Die temp is below usb charger
47 : USB_CHARGER_NOT_OKR : : allowed USB charger not ok detection
48 : VBUS_OVV : : Overvoltage on Vbus ball detected (USB charge is stopped)
49 : CH_WD_EXP : : Charger watchdog detected
50 ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
51 SW_CONV_END : :
52 ab8500-gpio : : : GPIO Controller
53 ab8500-ponkey : ONKEY_DBF : : Power-on Key
54 ONKEY_DBR : :
55 ab8500-pwm : : : Pulse Width Modulator
56 ab8500-regulator : : : Regulators
57 ab8500-rtc : 60S : : Real Time Clock
58 : ALARM : :
59 ab8500-sysctrl : : : System Control
60 ab8500-usb : ID_WAKEUP_R : vddulpivio18 : Universal Serial Bus
61 : ID_WAKEUP_F : v-ape :
62 : VBUS_DET_F : musb_1v8 :
63 : VBUS_DET_R : :
64 : USB_LINK_STATUS : :
65 : USB_ADP_PROBE_PLUG : :
66 : USB_ADP_PROBE_UNPLUG : :
67
68 Required child device properties:
69 - compatible : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey|
70 pwm|regulator|rtc|sysctrl|usb]";
71
72 Optional child device properties:
73 - interrupts : contains the device IRQ(s) using the 2-cell format (see above)
74 - interrupt-names : contains names of IRQ resource in the order in which they were
75 supplied in the interrupts property
76 - <supply_name>-supply : contains a phandle to the regulator supply node in Device Tree
77
78 Non-standard child device properties:
79 - Audio CODEC:
80 - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential)
81 - stericsson,amic1a-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic
82 - stericsson,amic1b-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic
83 - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic
84 - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
85
86 ab8500 {
87 compatible = "stericsson,ab8500";
88 interrupts = <0 40 0x4>;
89 interrupt-controller;
90 #interrupt-cells = <2>;
91
92 ab8500-rtc {
93 compatible = "stericsson,ab8500-rtc";
94 interrupts = <17 0x4
95 18 0x4>;
96 interrupt-names = "60S", "ALARM";
97 };
98
99 ab8500-gpadc {
100 compatible = "stericsson,ab8500-gpadc";
101 interrupts = <32 0x4
102 39 0x4>;
103 interrupt-names = "HW_CONV_END", "SW_CONV_END";
104 vddadc-supply = <&ab8500_ldo_tvout_reg>;
105 };
106
107 ab8500-usb {
108 compatible = "stericsson,ab8500-usb";
109 interrupts = < 90 0x4
110 96 0x4
111 14 0x4
112 15 0x4
113 79 0x4
114 74 0x4
115 75 0x4>;
116 interrupt-names = "ID_WAKEUP_R",
117 "ID_WAKEUP_F",
118 "VBUS_DET_F",
119 "VBUS_DET_R",
120 "USB_LINK_STATUS",
121 "USB_ADP_PROBE_PLUG",
122 "USB_ADP_PROBE_UNPLUG";
123 vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
124 v-ape-supply = <&db8500_vape_reg>;
125 musb_1v8-supply = <&db8500_vsmps2_reg>;
126 };
127
128 ab8500-ponkey {
129 compatible = "stericsson,ab8500-ponkey";
130 interrupts = <6 0x4
131 7 0x4>;
132 interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
133 };
134
135 ab8500-sysctrl {
136 compatible = "stericsson,ab8500-sysctrl";
137 };
138
139 ab8500-pwm {
140 compatible = "stericsson,ab8500-pwm";
141 };
142
143 codec: ab8500-codec {
144 compatible = "stericsson,ab8500-codec";
145
146 stericsson,earpeice-cmv = <950>; /* Units in mV. */
147 };
148
149 ab8500-regulators {
150 compatible = "stericsson,ab8500-regulator";
151
152 ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
153 /*
154 * See: Documentation/devicetree/bindings/regulator/regulator.txt
155 * for more information on regulators
156 */
157 };
158 };
159 };
This page took 0.062183 seconds and 5 git commands to generate.