Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt

   1 -------------------------------
   2 BCM590xx Power Management Units
   3 -------------------------------
   4
   5 Required properties:
   6 - compatible: "brcm,bcm59056"
   7 - reg: I2C slave address
   8 - interrupts: interrupt for the PMU. Generic interrupt client node bindings
   9   are described in interrupt-controller/interrupts.txt
  10
  11 ------------------
  12 Voltage Regulators
  13 ------------------
  14
  15 Optional child nodes:
  16 - regulators: container node for regulators following the generic
  17   regulator binding in regulator/regulator.txt
  18
  19   The valid regulator node names for BCM59056 are:
  20         rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
  21         mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
  22         csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
  23         gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
  24         vbus
  25
  26 Example:
  27         pmu: bcm59056@8 {
  28                 compatible = "brcm,bcm59056";
  29                 reg = <0x08>;
  30                 interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
  31                 regulators {
  32                         rfldo_reg: rfldo {
  33                                 regulator-min-microvolt = <1200000>;
  34                                 regulator-max-microvolt = <3300000>;
  35                         };
  36
  37                         ...
  38                 };
  39         };