1 TPS65910 Power Management Integrated Circuit
4 - compatible: "ti,tps65910" or "ti,tps65911"
5 - reg: I2C slave address
6 - interrupts: the interrupt outputs of the controller
7 - #gpio-cells: number of cells to describe a GPIO, this should be 2.
8 The first cell is the GPIO number.
9 The second cell is used to specify additional options <unused>.
10 - gpio-controller: mark the device as a GPIO controller
11 - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
12 The first cell is the IRQ number.
13 The second cell is the flags, encoded as the trigger masks from
14 Documentation/devicetree/bindings/interrupts.txt
15 - regulators: This is the list of child nodes that specify the regulator
16 initialization data for defined regulators. Not all regulators for the given
17 device need to be present. The definition for each of these nodes is defined
18 using the standard binding for regulators found at
19 Documentation/devicetree/bindings/regulator/regulator.txt.
20 The regulator is matched with the regulator-compatible.
22 The valid regulator-compatible values are:
23 tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
25 tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
28 - xxx-supply: Input voltage supply regulator.
29 These entries are require if regulators are enabled for a device. Missing of these
30 properties can cause the regulator registration fails.
31 If some of input supply is powered through battery or always-on supply then
32 also it is require to have these parameters with proper node handle of always
35 vcc1-supply: VDD1 input.
36 vcc2-supply: VDD2 input.
37 vcc3-supply: VAUX33 and VMMC input.
38 vcc4-supply: VAUX1 and VAUX2 input.
39 vcc5-supply: VPLL and VDAC input.
40 vcc6-supply: VDIG1 and VDIG2 input.
41 vcc7-supply: VRTC input.
42 vccio-supply: VIO input.
44 vcc1-supply: VDD1 input.
45 vcc2-supply: VDD2 input.
46 vcc3-supply: LDO6, LDO7 and LDO8 input.
47 vcc4-supply: LDO5 input.
48 vcc5-supply: LDO3 and LDO4 input.
49 vcc6-supply: LDO1 and LDO2 input.
50 vcc7-supply: VRTC input.
51 vccio-supply: VIO input.
54 - ti,vmbch-threshold: (tps65911) main battery charged threshold
55 comparator. (see VMBCH_VSEL in TPS65910 datasheet)
56 - ti,vmbch2-threshold: (tps65911) main battery discharged threshold
57 comparator. (see VMBCH_VSEL in TPS65910 datasheet)
58 - ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
59 in TPS6591X datasheet)
60 - ti,en-gpio-sleep: enable sleep control for gpios
61 There should be 9 entries here, one for each gpio.
63 Regulator Optional properties:
64 - ti,regulator-ext-sleep-control: enable external sleep
65 control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
66 If this property is not defined, it defaults to 0 (not enabled).
71 compatible = "ti,tps65910";
73 interrupt-parent = <&intc>;
74 interrupts = < 0 118 0x04 >;
79 #interrupt-cells = <2>;
82 ti,vmbch-threshold = 0;
83 ti,vmbch2-threshold = 0;
85 ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
87 vcc1-supply = <®_parent>;
88 vcc2-supply = <&some_reg>;
100 vdd1_reg: regulator@0 {
101 regulator-compatible = "vdd1";
103 regulator-min-microvolt = < 600000>;
104 regulator-max-microvolt = <1500000>;
107 ti,regulator-ext-sleep-control = <0>;
109 vdd2_reg: regulator@1 {
110 regulator-compatible = "vdd2";
112 regulator-min-microvolt = < 600000>;
113 regulator-max-microvolt = <1500000>;
116 ti,regulator-ext-sleep-control = <4>;
118 vddctrl_reg: regulator@2 {
119 regulator-compatible = "vddctrl";
121 regulator-min-microvolt = < 600000>;
122 regulator-max-microvolt = <1400000>;
125 ti,regulator-ext-sleep-control = <0>;
127 vio_reg: regulator@3 {
128 regulator-compatible = "vio";
130 regulator-min-microvolt = <1500000>;
131 regulator-max-microvolt = <1800000>;
134 ti,regulator-ext-sleep-control = <1>;
136 ldo1_reg: regulator@4 {
137 regulator-compatible = "ldo1";
139 regulator-min-microvolt = <1000000>;
140 regulator-max-microvolt = <3300000>;
141 ti,regulator-ext-sleep-control = <0>;
143 ldo2_reg: regulator@5 {
144 regulator-compatible = "ldo2";
146 regulator-min-microvolt = <1050000>;
147 regulator-max-microvolt = <1050000>;
148 ti,regulator-ext-sleep-control = <0>;
150 ldo3_reg: regulator@6 {
151 regulator-compatible = "ldo3";
153 regulator-min-microvolt = <1000000>;
154 regulator-max-microvolt = <3300000>;
155 ti,regulator-ext-sleep-control = <0>;
157 ldo4_reg: regulator@7 {
158 regulator-compatible = "ldo4";
160 regulator-min-microvolt = <1000000>;
161 regulator-max-microvolt = <3300000>;
163 ti,regulator-ext-sleep-control = <0>;
165 ldo5_reg: regulator@8 {
166 regulator-compatible = "ldo5";
168 regulator-min-microvolt = <1000000>;
169 regulator-max-microvolt = <3300000>;
170 ti,regulator-ext-sleep-control = <0>;
172 ldo6_reg: regulator@9 {
173 regulator-compatible = "ldo6";
175 regulator-min-microvolt = <1200000>;
176 regulator-max-microvolt = <1200000>;
177 ti,regulator-ext-sleep-control = <0>;
179 ldo7_reg: regulator@10 {
180 regulator-compatible = "ldo7";
182 regulator-min-microvolt = <1200000>;
183 regulator-max-microvolt = <1200000>;
186 ti,regulator-ext-sleep-control = <1>;
188 ldo8_reg: regulator@11 {
189 regulator-compatible = "ldo8";
191 regulator-min-microvolt = <1000000>;
192 regulator-max-microvolt = <3300000>;
194 ti,regulator-ext-sleep-control = <1>;