mmc: sdhci-tegra: Add 8-bit support to device tree binding.
[deliverable/linux.git] / Documentation / devicetree / bindings / mmc / nvidia-sdhci.txt
1 * NVIDIA Tegra Secure Digital Host Controller
2
3 This controller on Tegra family SoCs provides an interface for MMC, SD,
4 and SDIO types of memory cards.
5
6 Required properties:
7 - compatible : Should be "nvidia,<chip>-sdhci"
8 - reg : Should contain SD/MMC registers location and length
9 - interrupts : Should contain SD/MMC interrupt
10
11 Optional properties:
12 - cd-gpios : Specify GPIOs for card detection
13 - wp-gpios : Specify GPIOs for write protection
14 - power-gpios : Specify GPIOs for power control
15 - support-8bit : Boolean, indicates if 8-bit mode should be used.
16
17 Example:
18
19 sdhci@c8000200 {
20 compatible = "nvidia,tegra20-sdhci";
21 reg = <0xc8000200 0x200>;
22 interrupts = <47>;
23 cd-gpios = <&gpio 69 0>; /* gpio PI5 */
24 wp-gpios = <&gpio 57 0>; /* gpio PH1 */
25 power-gpios = <&gpio 155 0>; /* gpio PT3 */
26 support-8bit;
27 };
This page took 0.031588 seconds and 5 git commands to generate.