Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt

   1 PXA3xx NAND DT bindings
   2
   3 Required properties:
   4
   5  - compatible:          Should be "marvell,pxa3xx-nand"
   6  - reg:                 The register base for the controller
   7  - interrupts:          The interrupt to map
   8  - #address-cells:      Set to <1> if the node includes partitions
   9
  10 Optional properties:
  11
  12  - marvell,nand-enable-arbiter: Set to enable the bus arbiter
  13  - marvell,nand-keep-config:    Set to keep the NAND controller config as set
  14                                 by the bootloader
  15  - num-cs:                      Number of chipselect lines to usw
  16
  17 Example:
  18
  19         nand0: nand@43100000 {
  20                 compatible = "marvell,pxa3xx-nand";
  21                 reg = <0x43100000 90>;
  22                 interrupts = <45>;
  23                 #address-cells = <1>;
  24
  25                 marvell,nand-enable-arbiter;
  26                 marvell,nand-keep-config;
  27                 num-cs = <1>;
  28
  29                 /* partitions (optional) */
  30         };
  31