Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt

   1 * Marvell PXA1928 USB and HSIC PHYs
   2
   3 Required properties:
   4 - compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy"
   5 - reg: base address and length of the registers
   6 - clocks - A single clock. From common clock binding.
   7 - #phys-cells: should be 0. From commmon phy binding.
   8 - resets: reference to the reset controller
   9
  10 Example:
  11
  12         usbphy: phy@7000 {
  13                 compatible = "marvell,pxa1928-usb-phy";
  14                 reg = <0x7000 0xe0>;
  15                 clocks = <&apmu_clocks PXA1928_CLK_USB>;
  16                 #phy-cells = <0>;
  17         };
  18