Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt

   1 ST Ericsson Nomadik pinmux controller
   2
   3 Required properties:
   4 - compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl",
   5               "stericsson,stn8815-pinctrl"
   6 - nomadik-gpio-chips: array of phandles to the corresponding GPIO chips
   7               (these have the register ranges used by the pin controller).
   8 - prcm: phandle to the PRCMU managing the back end of this pin controller
   9
  10 Please refer to pinctrl-bindings.txt in this directory for details of the
  11 common pinctrl bindings used by client devices, including the meaning of the
  12 phrase "pin configuration node".
  13
  14 ST Ericsson's pin configuration nodes act as a container for an arbitrary number of
  15 subnodes. Each of these subnodes represents some desired configuration for a
  16 pin, a group, or a list of pins or groups. This configuration can include the
  17 mux function to select on those pin(s)/group(s), and various pin configuration
  18 parameters, such as input, output, pull up, pull down...
  19
  20 The name of each subnode is not important; all subnodes should be enumerated
  21 and processed purely based on their content. The subnodes use the generic
  22 pin multiplexing node layout from the standard pin control bindings
  23 (see pinctrl-bindings.txt):
  24
  25 Required pin multiplexing subnode properties:
  26 - function: A string containing the name of the function to mux to the
  27   pin or group.
  28 - groups : An array of strings. Each string contains the name of a pin
  29   group that will be combined with the function to form a multiplexing
  30   set-up.
  31
  32 Required pin configuration subnode properties:
  33 - pins: A string array describing the pins affected by the configuration
  34   in the node.
  35 - ste,config: Handle of pin configuration node
  36   (e.g. ste,config = <&slpm_in_wkup_pdis>)
  37
  38 - ste,input : <0/1/2>
  39         0: input with no pull
  40         1: input with pull up,
  41         2: input with pull down,
  42
  43 - ste,output: <0/1/2>
  44         0: output low,
  45         1: output high,
  46         2: output (value is not specified).
  47
  48 - ste,sleep: <0/1>
  49         0: sleep mode disable,
  50         1: sleep mode enable.
  51
  52 - ste,sleep-input: <0/1/2/3>
  53         0: sleep input with no pull,
  54         1: sleep input with pull up,
  55         2: sleep input with pull down.
  56         3: sleep input and keep last input configuration (no pull, pull up or pull down).
  57
  58 - ste,sleep-output: <0/1/2>
  59         0: sleep output low,
  60         1: sleep output high,
  61         2: sleep output (value is not specified).
  62
  63 - ste,sleep-gpio: <0/1>
  64         0: disable sleep gpio mode,
  65         1: enable sleep gpio mode.
  66
  67 - ste,sleep-wakeup: <0/1>
  68         0: wake-up detection enabled,
  69         1: wake-up detection disabled.
  70
  71 - ste,sleep-pull-disable: <0/1>
  72         0: GPIO pull-up or pull-down resistor is enabled, when pin is an input,
  73         1: GPIO pull-up and pull-down resistor are disabled.
  74
  75 Example board file extract:
  76
  77         pinctrl@80157000 {
  78                 compatible = "stericsson,db8500-pinctrl";
  79                 nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>;
  80                 prcm = <&prcmu>;
  81
  82                 pinctrl-names = "default";
  83
  84                 slpm_in_wkup_pdis: slpm_in_wkup_pdis {
  85                         ste,sleep = <1>;
  86                         ste,sleep-input = <3>;
  87                         ste,sleep-wakeup = <1>;
  88                         ste,sleep-pull-disable = <0>;
  89                 };
  90
  91                 slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
  92                         ste,sleep = <1>;
  93                         ste,sleep-output = <1>;
  94                         ste,sleep-wakeup = <1>;
  95                         ste,sleep-pull-disable = <0>;
  96                 };
  97
  98                 slpm_out_wkup_pdis: slpm_out_wkup_pdis {
  99                         ste,sleep = <1>;
 100                         ste,sleep-output = <2>;
 101                         ste,sleep-wakeup = <1>;
 102                         ste,sleep-pull-disable = <0>;
 103                 };
 104
 105                 uart0 {
 106                         uart0_default_mux: uart0_mux {
 107                                 u0_default_mux {
 108                                         function = "u0";
 109                                         pins = "u0_a_1";
 110                                 };
 111                         };
 112                         uart0_default_mode: uart0_default {
 113                                 uart0_default_cfg1 {
 114                                         pins = "GPIO0", "GPIO2";
 115                                         ste,input = <1>;
 116                                 };
 117
 118                                 uart0_default_cfg2 {
 119                                         pins = "GPIO1", "GPIO3";
 120                                         ste,output = <1>;
 121                                 };
 122                         };
 123                         uart0_sleep_mode: uart0_sleep {
 124                                 uart0_sleep_cfg1 {
 125                                         pins = "GPIO0", "GPIO2";
 126                                         ste,config = <&slpm_in_wkup_pdis>;
 127                                 };
 128                                 uart0_sleep_cfg2 {
 129                                         pins = "GPIO1";
 130                                         ste,config = <&slpm_out_hi_wkup_pdis>;
 131                                 };
 132                                 uart0_sleep_cfg3 {
 133                                         pins = "GPIO3";
 134                                         ste,config = <&slpm_out_wkup_pdis>;
 135                                 };
 136                         };
 137                 };
 138         };
 139
 140         uart@80120000 {
 141                 compatible = "arm,pl011", "arm,primecell";
 142                 reg = <0x80120000 0x1000>;
 143                 interrupts = <0 11 0x4>;
 144
 145                 pinctrl-names = "default","sleep";
 146                 pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
 147                 pinctrl-1 = <&uart0_sleep_mode>;
 148         };